aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DMA-API-HOWTO.txt6
-rw-r--r--Documentation/DocBook/kernel-locking.tmpl7
-rw-r--r--Documentation/DocBook/tracepoint.tmpl5
-rw-r--r--Documentation/acpi/method-customizing.txt2
-rw-r--r--Documentation/filesystems/Locking8
-rw-r--r--Documentation/filesystems/vfs.txt6
-rw-r--r--Documentation/hwmon/emc210333
-rw-r--r--Documentation/hwmon/f71882fg4
-rw-r--r--Documentation/hwmon/ltc424524
-rw-r--r--Documentation/hwmon/pc8742727
-rw-r--r--Documentation/hwmon/sysfs-interface29
-rw-r--r--Documentation/hwmon/w83627ehf15
-rw-r--r--Documentation/kbuild/makefiles.txt6
-rw-r--r--Documentation/kernel-parameters.txt141
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt4
-rw-r--r--Documentation/lguest/Makefile3
-rw-r--r--Documentation/lguest/lguest.c23
-rw-r--r--Documentation/powerpc/booting-without-of.txt31
-rw-r--r--Documentation/powerpc/hvcs.txt2
-rw-r--r--Documentation/scsi/scsi-parameters.txt139
20 files changed, 304 insertions, 211 deletions
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index 3c4e07123e5..d568bc235bc 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -738,17 +738,17 @@ to "Closing".
CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
(including software IOMMU).
-2) ARCH_KMALLOC_MINALIGN
+2) ARCH_DMA_MINALIGN
Architectures must ensure that kmalloc'ed buffer is
DMA-safe. Drivers and subsystems depend on it. If an architecture
isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
the CPU cache is identical to data in main memory),
- ARCH_KMALLOC_MINALIGN must be set so that the memory allocator
+ ARCH_DMA_MINALIGN must be set so that the memory allocator
makes sure that kmalloc'ed buffer doesn't share a cache line with
the others. See arch/arm/include/asm/cache.h as an example.
- Note that ARCH_KMALLOC_MINALIGN is about DMA memory alignment
+ Note that ARCH_DMA_MINALIGN is about DMA memory alignment
constraints. You don't need to worry about the architecture data
alignment constraints (e.g. the alignment constraints about 64-bit
objects).
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 084f6ad7b7a..0b1a3f97f28 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1922,9 +1922,12 @@ machines due to caching.
<function>mutex_lock()</function>
</para>
<para>
- There is a <function>mutex_trylock()</function> which can be
- used inside interrupt context, as it will not sleep.
+ There is a <function>mutex_trylock()</function> which does not
+ sleep. Still, it must not be used inside interrupt context since
+ its implementation is not safe for that.
<function>mutex_unlock()</function> will also never sleep.
+ It cannot be used in interrupt context either since a mutex
+ must be released by the same task that acquired it.
</para>
</listitem>
</itemizedlist>
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
index e8473eae2a2..b57a9ede322 100644
--- a/Documentation/DocBook/tracepoint.tmpl
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -104,4 +104,9 @@
<title>Block IO</title>
!Iinclude/trace/events/block.h
</chapter>
+
+ <chapter id="workqueue">
+ <title>Workqueue</title>
+!Iinclude/trace/events/workqueue.h
+ </chapter>
</book>
diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt
index e628cd23ca8..3e1d25aee3f 100644
--- a/Documentation/acpi/method-customizing.txt
+++ b/Documentation/acpi/method-customizing.txt
@@ -19,6 +19,8 @@ Note: Only ACPI METHOD can be overridden, any other object types like
"Device", "OperationRegion", are not recognized.
Note: The same ACPI control method can be overridden for many times,
and it's always the latest one that used by Linux/kernel.
+Note: To get the ACPI debug object output (Store (AAAA, Debug)),
+ please run "echo 1 > /sys/module/acpi/parameters/aml_debug_output".
1. override an existing method
a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index bbcc15651a2..2db4283efa8 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -374,8 +374,6 @@ prototypes:
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int,
- unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
@@ -409,8 +407,7 @@ write: no
aio_write: no
readdir: no
poll: no
-ioctl: yes (see below)
-unlocked_ioctl: no (see below)
+unlocked_ioctl: no
compat_ioctl: no
mmap: no
open: no
@@ -453,9 +450,6 @@ move ->readdir() to inode_operations and use a separate method for directory
anything that resembles union-mount we won't have a struct file for all
components. And there are other reasons why the current interface is a mess...
-->ioctl() on regular files is superceded by the ->unlocked_ioctl() that
-doesn't take the BKL.
-
->read on directories probably must go away - we should just enforce -EISDIR
in sys_read() and friends.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 94677e7dcb1..ed7e5efc06d 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -727,7 +727,6 @@ struct file_operations {
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
@@ -768,10 +767,7 @@ otherwise noted.
activity on this file and (optionally) go to sleep until there
is activity. Called by the select(2) and poll(2) system calls
- ioctl: called by the ioctl(2) system call
-
- unlocked_ioctl: called by the ioctl(2) system call. Filesystems that do not
- require the BKL should use this method instead of the ioctl() above.
+ unlocked_ioctl: called by the ioctl(2) system call.
compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
are used on 64 bit kernels.
diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103
new file mode 100644
index 00000000000..a12b2c12714
--- /dev/null
+++ b/Documentation/hwmon/emc2103
@@ -0,0 +1,33 @@
+Kernel driver emc2103
+======================
+
+Supported chips:
+ * SMSC EMC2103
+ Addresses scanned: I2C 0x2e
+ Prefix: 'emc2103'
+ Datasheet: Not public
+
+Authors:
+ Steve Glendinning <steve.glendinning@smsc.com>
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) EMC2103 chips
+contain up to 4 temperature sensors and a single fan controller.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 1, the lowest
+representable value is 480 RPM.
+
+This driver supports RPM based control, to use this a fan target
+should be written to fan1_target and pwm1_enable should be set to 3.
+
+The 2103-2 and 2103-4 variants have a third temperature sensor, which can
+be connected to two anti-parallel diodes. These values can be read
+as temp3 and temp4. If only one diode is attached to this channel, temp4
+will show as "fault". The module parameter "apd=0" can be used to suppress
+this 4th channel when anti-parallel diodes are not fitted.
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index 1a07fd674cd..a7952c2bd95 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -2,10 +2,6 @@ Kernel driver f71882fg
======================
Supported chips:
- * Fintek F71808E
- Prefix: 'f71808fg'
- Addresses scanned: none, address read from Super I/O config space
- Datasheet: Not public
* Fintek F71858FG
Prefix: 'f71858fg'
Addresses scanned: none, address read from Super I/O config space
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index 86b5880d850..b478b086496 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -72,9 +72,31 @@ in6_min_alarm 5v output undervoltage alarm
in7_min_alarm 3v output undervoltage alarm
in8_min_alarm Vee (-12v) output undervoltage alarm
-in9_input GPIO voltage data
+in9_input GPIO voltage data (see note 1)
+in10_input GPIO voltage data (see note 1)
+in11_input GPIO voltage data (see note 1)
power1_input 12v power usage (mW)
power2_input 5v power usage (mW)
power3_input 3v power usage (mW)
power4_input Vee (-12v) power usage (mW)
+
+
+Note 1
+------
+
+If you have NOT configured the driver to sample all GPIO pins as analog
+voltages, then the in10_input and in11_input sysfs attributes will not be
+created. The driver will sample the GPIO pin that is currently connected to the
+ADC as an analog voltage, and report the value in in9_input.
+
+If you have configured the driver to sample all GPIO pins as analog voltages,
+then they will be sampled in round-robin fashion. If userspace reads too
+slowly, -EAGAIN will be returned when you read the sysfs attribute containing
+the sensor reading.
+
+The LTC4245 chip can be configured to sample all GPIO pins with two methods:
+1) platform data -- see include/linux/i2c/ltc4245.h
+2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
+
+The default mode of operation is to sample a single GPIO pin.
diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427
index db5cc1227a8..8fdd08c9e48 100644
--- a/Documentation/hwmon/pc87427
+++ b/Documentation/hwmon/pc87427
@@ -18,10 +18,11 @@ Description
The National Semiconductor Super I/O chip includes complete hardware
monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
-6 temperature sensors. Only the fans are supported at the moment.
+6 temperature sensors. Only the fans and temperatures are supported at
+the moment, voltages aren't.
-This chip also has fan controlling features, which are not yet supported
-by this driver either.
+This chip also has fan controlling features (up to 4 PWM outputs),
+which are partly supported by this driver.
The driver assumes that no more than one chip is present, which seems
reasonable.
@@ -36,3 +37,23 @@ signal. Speeds down to 83 RPM can be measured.
An alarm is triggered if the rotation speed drops below a programmable
limit. Another alarm is triggered if the speed is too low to be measured
(including stalled or missing fan).
+
+
+Fan Speed Control
+-----------------
+
+Fan speed can be controlled by PWM outputs. There are 4 possible modes:
+always off, always on, manual and automatic. The latter isn't supported
+by the driver: you can only return to that mode if it was the original
+setting, and the configuration interface is missing.
+
+
+Temperature Monitoring
+----------------------
+
+The PC87427 relies on external sensors (following the SensorPath
+standard), so the resolution and range depend on the type of sensor
+connected. The integer part can be 8-bit or 9-bit, and can be signed or
+not. I couldn't find a way to figure out the external sensor data
+temperature format, so user-space adjustment (typically by a factor 2)
+may be required.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index d4e2917c6f1..ff45d1f837c 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -107,10 +107,24 @@ in[0-*]_min Voltage min value.
Unit: millivolt
RW
+in[0-*]_lcrit Voltage critical min value.
+ Unit: millivolt
+ RW
+ If voltage drops to or below this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_max Voltage max value.
Unit: millivolt
RW
+in[0-*]_crit Voltage critical max value.
+ Unit: millivolt
+ RW
+ If voltage reaches or exceeds this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_input Voltage input value.
Unit: millivolt
RO
@@ -284,7 +298,7 @@ temp[1-*]_input Temperature input value.
Unit: millidegree Celsius
RO
-temp[1-*]_crit Temperature critical value, typically greater than
+temp[1-*]_crit Temperature critical max value, typically greater than
corresponding temp_max values.
Unit: millidegree Celsius
RW
@@ -296,6 +310,11 @@ temp[1-*]_crit_hyst
from the critical value.
RW
+temp[1-*]_lcrit Temperature critical min value, typically lower than
+ corresponding temp_min values.
+ Unit: millidegree Celsius
+ RW
+
temp[1-*]_offset
Temperature offset which is added to the temperature reading
by the chip.
@@ -344,9 +363,6 @@ Also see the Alarms section for status flags associated with temperatures.
* Currents *
************
-Note that no known chip provides current measurements as of writing,
-so this part is theoretical, so to say.
-
curr[1-*]_max Current max value
Unit: milliampere
RW
@@ -471,6 +487,7 @@ limit-related alarms, not both. The driver should just reflect the hardware
implementation.
in[0-*]_alarm
+curr[1-*]_alarm
fan[1-*]_alarm
temp[1-*]_alarm
Channel alarm
@@ -482,6 +499,8 @@ OR
in[0-*]_min_alarm
in[0-*]_max_alarm
+curr[1-*]_min_alarm
+curr[1-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
@@ -497,7 +516,6 @@ to notify open diodes, unconnected fans etc. where the hardware
supports it. When this boolean has value 1, the measurement for that
channel should not be trusted.
-in[0-*]_fault
fan[1-*]_fault
temp[1-*]_fault
Input fault condition
@@ -513,6 +531,7 @@ beep_enable Master beep enable
RW
in[0-*]_beep
+curr[1-*]_beep
fan[1-*]_beep
temp[1-*]_beep
Channel beep
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index b7e42ec4b26..13d556112fc 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -20,6 +20,10 @@ Supported chips:
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
+ * Winbond W83667HG-B
+ Prefix: 'w83667hg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Jean Delvare <khali@linux-fr.org>
@@ -32,8 +36,8 @@ Description
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
-collectively as Winbond chips.
+W83627DHG, W83627DHG-P, W83667HG and W83667HG-B super I/O chips.
+We will refer to them collectively as Winbond chips.
The chips implement three temperature sensors, five fan rotation
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -68,14 +72,15 @@ follows:
temp1 -> pwm1
temp2 -> pwm2
temp3 -> pwm3
-prog -> pwm4 (not on 667HG; the programmable setting is not supported by
- the driver)
+prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
+ supported by the driver)
/sys files
----------
name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
- it is set to "w83627ehf" and for the W83627DHG it is set to "w83627dhg"
+ it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
+ and for the W83667HG it is set to "w83667hg".
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index c375313cb12..c787ae51212 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -45,7 +45,6 @@ This document describes the Linux kernel Makefiles.
--- 7.1 header-y
--- 7.2 objhdr-y
--- 7.3 destination-y
- --- 7.4 unifdef-y (deprecated)
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1245,11 +1244,6 @@ See subsequent chapter for the syntax of the Kbuild file.
will be located in the directory "include/linux" when exported.
- --- 7.4 unifdef-y (deprecated)
-
- unifdef-y is deprecated. A direct replacement is header-y.
-
-
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8f126e878db..8dd7248508a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -88,8 +88,8 @@ parameter is applicable:
RAM RAM disk support is enabled.
S390 S390 architecture is enabled.
SCSI Appropriate SCSI support is enabled.
- A lot of drivers has their options described inside of
- Documentation/scsi/.
+ A lot of drivers have their options described inside
+ the Documentation/scsi/ sub-directory.
SECURITY Different security models are enabled.
SELINUX SELinux support is enabled.
APPARMOR AppArmor support is enabled.
@@ -284,27 +284,12 @@ and is between 256 and 4096 characters. It is defined in the file
add_efi_memmap [EFI; X86] Include EFI memory map in
kernel's map of available physical RAM.
- advansys= [HW,SCSI]
- See header of drivers/scsi/advansys.c.
-
agp= [AGP]
{ off | try_unsupported }
off: disable AGP support
try_unsupported: try to drive unsupported chipsets
(may crash computer or cause data corruption)
- aha152x= [HW,SCSI]
- See Documentation/scsi/aha152x.txt.
-
- aha1542= [HW,SCSI]
- Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
-
- aic7xxx= [HW,SCSI]
- See Documentation/scsi/aic7xxx.txt.
-
- aic79xx= [HW,SCSI]
- See Documentation/scsi/aic79xx.txt.
-
ALSA [HW,ALSA]
See Documentation/sound/alsa/alsa-parameters.txt
@@ -368,8 +353,6 @@ and is between 256 and 4096 characters. It is defined in the file
atarimouse= [HW,MOUSE] Atari Mouse
- atascsi= [HW,SCSI] Atari SCSI
-
atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
EzKey and similar keyboards
@@ -419,10 +402,6 @@ and is between 256 and 4096 characters. It is defined in the file
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
- BusLogic= [HW,SCSI]
- See drivers/scsi/BusLogic.c, comment before function
- BusLogic_ParseDriverOptions().
-
c101= [NET] Moxa C101 synchronous serial card
cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection.
@@ -671,8 +650,6 @@ and is between 256 and 4096 characters. It is defined in the file
dscc4.setup= [NET]
- dtc3181e= [HW,SCSI]
-
dynamic_printk Enables pr_debug()/dev_dbg() calls if
CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
These can also be switched on/off via
@@ -713,8 +690,6 @@ and is between 256 and 4096 characters. It is defined in the file
This is desgined to be used in conjunction with
the boot argument: earlyprintk=vga
- eata= [HW,SCSI]
-
edd= [EDD]
Format: {"off" | "on" | "skip[mbr]"}
@@ -770,12 +745,6 @@ and is between 256 and 4096 characters. It is defined in the file
Format: <interval>,<probability>,<space>,<times>
See also /Documentation/fault-injection/.
- fd_mcs= [HW,SCSI]
- See header of drivers/scsi/fd_mcs.c.
-
- fdomain= [HW,SCSI]
- See header of drivers/scsi/fdomain.c.
-
floppy= [HW]
See Documentation/blockdev/floppy.txt.
@@ -835,14 +804,9 @@ and is between 256 and 4096 characters. It is defined in the file
When zero, profiling data is discarded and associated
debugfs files are removed at module unload time.
- gdth= [HW,SCSI]
- See header of drivers/scsi/gdth.c.
-
gpt [EFI] Forces disk with valid GPT signature but
invalid Protective MBR to be treated as GPT.
- gvp11= [HW,SCSI]
-
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for 64bit NUMA, off otherwise.
@@ -931,9 +895,6 @@ and is between 256 and 4096 characters. It is defined in the file
i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
capability is set.
- ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
- See Documentation/mca.txt.
-
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
@@ -983,9 +944,6 @@ and is between 256 and 4096 characters. It is defined in the file
programs exec'd, files mmap'd for exec, and all files
opened for read by uid=0.
- in2000= [HW,SCSI]
- See header of drivers/scsi/in2000.c.
-
init= [KNL]
Format: <full_path>
Run specified binary instead of /sbin/init as init
@@ -1023,6 +981,12 @@ and is between 256 and 4096 characters. It is defined in the file
result in a hardware IOTLB flush operation as opposed
to batching them for performance.
+ intremap= [X86-64, Intel-IOMMU]
+ Format: { on (default) | off | nosid }
+ on enable Interrupt Remapping (default)
+ off disable Interrupt Remapping
+ nosid disable Source ID checking
+
inttest= [IA64]
iomem= Disable strict checking of access to MMIO memory
@@ -1063,9 +1027,6 @@ and is between 256 and 4096 characters. It is defined in the file
See comment before ip2_setup() in
drivers/char/ip2/ip2base.c.
- ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
- See header of drivers/scsi/ips.c.
-
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
@@ -1341,9 +1302,6 @@ and is between 256 and 4096 characters. It is defined in the file
ltpc= [NET]
Format: <io>,<irq>,<dma>
- mac5380= [HW,SCSI] Format:
- <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
machvec= [IA64] Force the use of a particular machine-vector
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
@@ -1365,13 +1323,6 @@ and is between 256 and 4096 characters. It is defined in the file
be mounted
Format: <1-256>
- max_luns= [SCSI] Maximum number of LUNs to probe.
- Should be between 1 and 2^32-1.
-
- max_report_luns=
- [SCSI] Maximum number of LUNs received.
- Should be between 1 and 16384.
-
mcatest= [IA-64]
mce [X86-32] Machine Check Exception
@@ -1568,19 +1519,6 @@ and is between 256 and 4096 characters. It is defined in the file
n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
- NCR_D700= [HW,SCSI]
- See header of drivers/scsi/NCR_D700.c.
-
- ncr5380= [HW,SCSI]
-
- ncr53c400= [HW,SCSI]
-
- ncr53c400a= [HW,SCSI]
-
- ncr53c406a= [HW,SCSI]
-
- ncr53c8xx= [HW,SCSI]
-
netdev= [NET] Network devices parameters
Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
Note that mem_start is often overloaded to mean
@@ -1749,6 +1687,7 @@ and is between 256 and 4096 characters. It is defined in the file
nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
remapping.
+ [Deprecated - use intremap=off]
nointroute [IA-64]
@@ -1859,10 +1798,6 @@ and is between 256 and 4096 characters. It is defined in the file
OSS [HW,OSS]
See Documentation/sound/oss/oss-parameters.txt
- osst= [HW,SCSI] SCSI Tape Driver
- Format: <buffer_size>,<write_threshold>
- See also Documentation/scsi/st.txt.
-
panic= [KNL] Kernel behaviour on panic
Format: <timeout>
@@ -1895,9 +1830,6 @@ and is between 256 and 4096 characters. It is defined in the file
Currently this function knows 686a and 8231 chips.
Format: [spp|ps2|epp|ecp|ecpepp]
- pas16= [HW,SCSI]
- See header of drivers/scsi/pas16.c.
-
pause_on_oops=
Halt all CPUs after the first oops has been printed for
the specified number of seconds. This is to be used if
@@ -2267,30 +2199,6 @@ and is between 256 and 4096 characters. It is defined in the file
sched_debug [KNL] Enables verbose scheduler debug messages.
- scsi_debug_*= [SCSI]
- See drivers/scsi/scsi_debug.c.
-
- scsi_default_dev_flags=
- [SCSI] SCSI default device flags
- Format: <integer>
-
- scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
- Format: <vendor>:<model>:<flags>
- (flags are integer value)
-
- scsi_logging_level= [SCSI] a bit mask of logging levels
- See drivers/scsi/scsi_logging.h for bits. Also
- settable via sysctl at dev.scsi.logging_level
- (/proc/sys/dev/scsi/logging_level).
- There is also a nice 'scsi_logging_level' script in the
- S390-tools package, available for download at
- http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
-
- scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
- discovered. async scans them in kernel threads,
- allowing boot to proceed. none ignores them, expecting
- user space to do the scan.
-
security= [SECURITY] Choose a security module to enable at boot.
If this boot parameter is not specified, only the first
security module asking for security registration will be
@@ -2324,9 +2232,6 @@ and is between 256 and 4096 characters. It is defined in the file
The parameter means the number of CPUs to show,
for example 1 means boot CPU only.
- sim710= [SCSI,HW]
- See header of drivers/scsi/sim710.c.
-
simeth= [IA-64]
simscsi=
@@ -2398,9 +2303,6 @@ and is between 256 and 4096 characters. It is defined in the file
spia_pedr=
spia_peddr=
- st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
- See Documentation/scsi/st.txt.
-
stacktrace [FTRACE]
Enabled the stack tracer on boot up.
@@ -2458,18 +2360,12 @@ and is between 256 and 4096 characters. It is defined in the file
switches= [HW,M68k]
- sym53c416= [HW,SCSI]
- See header of drivers/scsi/sym53c416.c.
-
sysrq_always_enabled
[KNL]
Ignore sysrq setting - this boot parameter will
neutralize any effect of /proc/sys/kernel/sysrq.
Useful for debugging.
- t128= [HW,SCSI]
- See header of drivers/scsi/t128.c.
-
tdfx= [HW,DRM]
test_suspend= [SUSPEND]
@@ -2506,10 +2402,6 @@ and is between 256 and 4096 characters. It is defined in the file
<deci-seconds>: poll all this frequency
0: no polling (default)
- tmscsim= [HW,SCSI]
- See comment before function dc390_setup() in
- drivers/scsi/tmscsim.c.
-
topology= [S390]
Format: {off | on}
Specify if the kernel should make use of the cpu
@@ -2550,9 +2442,6 @@ and is between 256 and 4096 characters. It is defined in the file
<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
See also Documentation/input/joystick-parport.txt
- u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
- See header of drivers/scsi/u14-34f.c.
-
uhash_entries= [KNL,NET]
Set number of hash buckets for UDP/UDP-Lite connections
@@ -2718,12 +2607,6 @@ and is between 256 and 4096 characters. It is defined in the file
overridden by individual drivers. 0 will hide
cursors, 1 will display them.
- wd33c93= [HW,SCSI]
- See header of drivers/scsi/wd33c93.c.
-
- wd7000= [HW,SCSI]
- See header of drivers/scsi/wd7000.c.
-
watchdog timers [HW,WDT] For information on watchdog timers,
see Documentation/watchdog/watchdog-parameters.txt
or other driver-specific files in the
@@ -2749,8 +2632,10 @@ and is between 256 and 4096 characters. It is defined in the file
aux-ide-disks -- unplug non-primary-master IDE devices
nics -- unplug network devices
all -- unplug all emulated devices (NICs and IDE disks)
- ignore -- continue loading the Xen platform PCI driver even
- if the version check failed
+ unnecessary -- unplugging emulated devices is
+ unnecessary even if the host did not respond to
+ the unplug protocol
+ never -- do not unplug even if version check succeeds
xirc2ps_cs= [NET,PCMCIA]
Format:
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index f6f80257add..1565eefd6fd 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1024,6 +1024,10 @@ ThinkPad-specific interface. The driver will disable its native
backlight brightness control interface if it detects that the standard
ACPI interface is available in the ThinkPad.
+If you want to use the thinkpad-acpi backlight brightness control
+instead of the generic ACPI video backlight brightness control for some
+reason, you should use the acpi_backlight=vendor kernel parameter.
+
The brightness_enable module parameter can be used to control whether
the LCD brightness control feature will be enabled when available.
brightness_enable=0 forces it to be disabled. brightness_enable=1
diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile
index 28c8cdfcafd..bebac6b4f33 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/lguest/Makefile
@@ -1,5 +1,6 @@
# This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
+# Missing headers? Add "-I../../include -I../../arch/x86/include"
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
all: lguest
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index e9ce3c55451..8a6a8c6d498 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -39,14 +39,14 @@
#include <limits.h>
#include <stddef.h>
#include <signal.h>
-#include "linux/lguest_launcher.h"
-#include "linux/virtio_config.h"
-#include "linux/virtio_net.h"
-#include "linux/virtio_blk.h"
-#include "linux/virtio_console.h"
-#include "linux/virtio_rng.h"
-#include "linux/virtio_ring.h"
-#include "asm/bootparam.h"
+#include <linux/virtio_config.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_blk.h>
+#include <linux/virtio_console.h>
+#include <linux/virtio_rng.h>
+#include <linux/virtio_ring.h>
+#include <asm/bootparam.h>
+#include "../../include/linux/lguest_launcher.h"
/*L:110
* We can ignore the 42 include files we need for this program, but I do want
* to draw attention to the use of kernel-style types.
@@ -1447,14 +1447,15 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
static void configure_device(int fd, const char *tapif, u32 ipaddr)
{
struct ifreq ifr;
- struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
+ struct sockaddr_in sin;
memset(&ifr, 0, sizeof(ifr));
strcpy(ifr.ifr_name, tapif);
/* Don't read these incantations. Just cut & paste them like I did! */
- sin->sin_family = AF_INET;
- sin->sin_addr.s_addr = htonl(ipaddr);
+ sin.sin_family = AF_INET;
+ sin.sin_addr.s_addr = htonl(ipaddr);
+ memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
err(1, "Setting %s interface address", tapif);
ifr.ifr_flags = IFF_UP;
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 568fa08e82e..302db5da49b 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -49,40 +49,13 @@ Table of Contents
f) MDIO on GPIOs
g) SPI busses
- VII - Marvell Discovery mv64[345]6x System Controller chips
- 1) The /system-controller node
- 2) Child nodes of /system-controller
- a) Marvell Discovery MDIO bus
- b) Marvell Discovery ethernet controller
- c) Marvell Discovery PHY nodes
- d) Marvell Discovery SDMA nodes
- e) Marvell Discovery BRG nodes
- f) Marvell Discovery CUNIT nodes
- g) Marvell Discovery MPSCROUTING nodes
- h) Marvell Discovery MPSCINTR nodes
- i) Marvell Discovery MPSC nodes
- j) Marvell Discovery Watch Dog Timer nodes
- k) Marvell Discovery I2C nodes
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
- n) Marvell Discovery GPP (General Purpose Pins) nodes
- o) Marvell Discovery PCI host bridge node
- p) Marvell Discovery CPU Error nodes
- q) Marvell Discovery SRAM Controller nodes
- r) Marvell Discovery PCI Error Handler nodes
- s) Marvell Discovery Memory Controller nodes
-
- VIII - Specifying interrupt information for devices
+ VII - Specifying interrupt information for devices
1) interrupts property
2) interrupt-parent property
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
- IX - Specifying GPIO information for devices
- 1) gpios property
- 2) gpio-controller nodes
-
- X - Specifying device power management information (sleep property)
+ VIII - Specifying device power management information (sleep property)
Appendix A - Sample SOC node for MPC8540
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index f93462c5db2..6d8be3468d7 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -560,7 +560,7 @@ The proper channel for reporting bugs is either through the Linux OS
distribution company that provided your OS or by posting issues to the
PowerPC development mailing list at:
-linuxppc-dev@ozlabs.org
+linuxppc-dev@lists.ozlabs.org
This request is to provide a documented and searchable public exchange
of the problems and solutions surrounding this driver for the benefit of
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
new file mode 100644
index 00000000000..21e5798526e
--- /dev/null
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -0,0 +1,139 @@
+ SCSI Kernel Parameters
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+ advansys= [HW,SCSI]
+ See header of drivers/scsi/advansys.c.
+
+ aha152x= [HW,SCSI]
+ See Documentation/scsi/aha152x.txt.
+
+ aha1542= [HW,SCSI]
+ Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
+
+ aic7xxx= [HW,SCSI]
+ See Documentation/scsi/aic7xxx.txt.
+
+ aic79xx= [HW,SCSI]
+ See Documentation/scsi/aic79xx.txt.
+
+ atascsi= [HW,SCSI] Atari SCSI
+
+ BusLogic= [HW,SCSI]
+ See drivers/scsi/BusLogic.c, comment before function
+ BusLogic_ParseDriverOptions().
+
+ dtc3181e= [HW,SCSI]
+
+ eata= [HW,SCSI]
+
+ fd_mcs= [HW,SCSI]
+ See header of drivers/scsi/fd_mcs.c.
+
+ fdomain= [HW,SCSI]
+ See header of drivers/scsi/fdomain.c.
+
+ gdth= [HW,SCSI]
+ See header of drivers/scsi/gdth.c.
+
+ gvp11= [HW,SCSI]
+
+ ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
+ See Documentation/mca.txt.
+
+ in2000= [HW,SCSI]
+ See header of drivers/scsi/in2000.c.
+
+ ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
+ See header of drivers/scsi/ips.c.
+
+ mac5380= [HW,SCSI] Format:
+ <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+
+ max_luns= [SCSI] Maximum number of LUNs to probe.
+ Should be between 1 and 2^32-1.
+
+ max_report_luns=
+ [SCSI] Maximum number of LUNs received.
+ Should be between 1 and 16384.
+
+ NCR_D700= [HW,SCSI]
+ See header of drivers/scsi/NCR_D700.c.
+
+ ncr5380= [HW,SCSI]
+
+ ncr53c400= [HW,SCSI]
+
+ ncr53c400a= [HW,SCSI]
+
+ ncr53c406a= [HW,SCSI]
+
+ ncr53c8xx= [HW,SCSI]
+
+ nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
+
+ osst= [HW,SCSI] SCSI Tape Driver
+ Format: <buffer_size>,<write_threshold>
+ See also Documentation/scsi/st.txt.
+
+ pas16= [HW,SCSI]
+ See header of drivers/scsi/pas16.c.
+
+ scsi_debug_*= [SCSI]
+ See drivers/scsi/scsi_debug.c.
+
+ scsi_default_dev_flags=
+ [SCSI] SCSI default device flags
+ Format: <integer>
+
+ scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
+ Format: <vendor>:<model>:<flags>
+ (flags are integer value)
+
+ scsi_logging_level= [SCSI] a bit mask of logging levels
+ See drivers/scsi/scsi_logging.h for bits. Also
+ settable via sysctl at dev.scsi.logging_level
+ (/proc/sys/dev/scsi/logging_level).
+ There is also a nice 'scsi_logging_level' script in the
+ S390-tools package, available for download at
+ http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
+
+ scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
+ discovered. async scans them in kernel threads,
+ allowing boot to proceed. none ignores them, expecting
+ user space to do the scan.
+
+ sim710= [SCSI,HW]
+ See header of drivers/scsi/sim710.c.
+
+ st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
+ See Documentation/scsi/st.txt.
+
+ sym53c416= [HW,SCSI]
+ See header of drivers/scsi/sym53c416.c.
+
+ t128= [HW,SCSI]
+ See header of drivers/scsi/t128.c.
+
+ tmscsim= [HW,SCSI]
+ See comment before function dc390_setup() in
+ drivers/scsi/tmscsim.c.
+
+ u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
+ See header of drivers/scsi/u14-34f.c.
+
+ wd33c93= [HW,SCSI]
+ See header of drivers/scsi/wd33c93.c.
+
+ wd7000= [HW,SCSI]
+ See header of drivers/scsi/wd7000.c.
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-29 22:08:39 +0000