diff options
| author | Bibek Basu <bibek.basu@stericsson.com> | 2011-02-15 12:56:16 +0530 |
|---|---|---|
| committer | Nicolas Pitre <nicolas.pitre@linaro.org> | 2011-03-28 14:23:15 -0400 |
| commit | ba9ed06ef6f67f912852acac1f1c5a1d5ee07f86 (patch) | |
| tree | f72e34bedf1f7f19a2d9d4abaf2559c440ac8a6c /arch/arm/mach-ux500/board-mop500.c | |
| parent | 8d292c8b548713fab1793bfd8b32bc7b4f7c7b08 (diff) | |
mach-ux500: board support for AB8500 GPIO driver
This is the board support patch for ab8500 gpio driver
on mach-ux500.Patch implements 16 virtual
IRQ mapped to 16 interrupt capable AB8500 GPIOs.
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
[Modify for header file placement]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 3ef374a22bdf91fb3b4213200aadd054f81c3499)
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d0076453d7f..6ac0164db6e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -22,6 +22,7 @@ #include <linux/mfd/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/mfd/tc3589x.h> +#include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -42,10 +43,33 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { + .gpio_base = MOP500_AB8500_GPIO(0), + .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, + /* config_reg is the initial configuration of ab8500 pins. + * The pins can be configured as GPIO or alt functions based + * on value present in GpioSel1 to GpioSel6 and AlternatFunction + * register. This is the array of 7 configuration settings. + * One has to compile time decide these settings. Below is the + * explaination of these setting + * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO + * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO + * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO + * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO + * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO + * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO + * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured + * as GPIO then this register selectes the alternate fucntions + */ + .config_reg = {0x00, 0x1E, 0x80, 0x01, + 0x7A, 0x00, 0x00}, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), + .gpio = &ab8500_gpio_pdata, }; static struct resource ab8500_resources[] = { |