aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-04-21 15:50:49 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-04-21 15:50:49 -0700
commit9a64388d83f6ef08dfff405a9d122e3dbcb6bf38 (patch)
treea77532ce4d6d56be6c6c7f405cd901a0184250fb
parente80ab411e589e00550e2e6e5a6a02d59cc730357 (diff)
parent14b3ca4022f050f8622ed282b734ddf445464583 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--Documentation/powerpc/booting-without-of.txt622
-rw-r--r--Documentation/powerpc/phyp-assisted-dump.txt127
-rw-r--r--arch/powerpc/Kconfig82
-rw-r--r--arch/powerpc/Kconfig.debug2
-rw-r--r--arch/powerpc/Makefile12
-rw-r--r--arch/powerpc/boot/Makefile40
-rw-r--r--arch/powerpc/boot/bamboo.c3
-rw-r--r--arch/powerpc/boot/cpm-serial.c117
-rw-r--r--arch/powerpc/boot/cuboot-pq2.c27
-rw-r--r--arch/powerpc/boot/cuboot-rainier.c3
-rw-r--r--arch/powerpc/boot/cuboot-sequoia.c3
-rw-r--r--arch/powerpc/boot/cuboot-taishan.c3
-rw-r--r--arch/powerpc/boot/cuboot-warp.c2
-rw-r--r--arch/powerpc/boot/cuboot-yosemite.c44
-rw-r--r--arch/powerpc/boot/devtree.c20
-rw-r--r--arch/powerpc/boot/dts/bamboo.dts2
-rw-r--r--arch/powerpc/boot/dts/canyonlands.dts402
-rw-r--r--arch/powerpc/boot/dts/ebony.dts2
-rw-r--r--arch/powerpc/boot/dts/ep8248e.dts5
-rw-r--r--arch/powerpc/boot/dts/ep88xc.dts73
-rw-r--r--arch/powerpc/boot/dts/glacier.dts467
-rw-r--r--arch/powerpc/boot/dts/haleakala.dts4
-rw-r--r--arch/powerpc/boot/dts/katmai.dts2
-rw-r--r--arch/powerpc/boot/dts/kilauea.dts4
-rw-r--r--arch/powerpc/boot/dts/ksi8560.dts267
-rw-r--r--arch/powerpc/boot/dts/kuroboxHD.dts83
-rw-r--r--arch/powerpc/boot/dts/kuroboxHG.dts83
-rw-r--r--arch/powerpc/boot/dts/makalu.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc7448hpc2.dts97
-rw-r--r--arch/powerpc/boot/dts/mpc8272ads.dts132
-rw-r--r--arch/powerpc/boot/dts/mpc832x_mds.dts7
-rw-r--r--arch/powerpc/boot/dts/mpc832x_rdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc836x_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8540ads.dts173
-rw-r--r--arch/powerpc/boot/dts/mpc8541cds.dts161
-rw-r--r--arch/powerpc/boot/dts/mpc8544ds.dts299
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts289
-rw-r--r--arch/powerpc/boot/dts/mpc8555cds.dts161
-rw-r--r--arch/powerpc/boot/dts/mpc8560ads.dts209
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts291
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds.dts383
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc866ads.dts58
-rw-r--r--arch/powerpc/boot/dts/mpc885ads.dts77
-rw-r--r--arch/powerpc/boot/dts/pq2fads.dts126
-rw-r--r--arch/powerpc/boot/dts/prpmc2800.dts336
-rw-r--r--arch/powerpc/boot/dts/rainier.dts6
-rw-r--r--arch/powerpc/boot/dts/sbc8641d.dts352
-rw-r--r--arch/powerpc/boot/dts/sequoia.dts6
-rw-r--r--arch/powerpc/boot/dts/taishan.dts31
-rw-r--r--arch/powerpc/boot/dts/walnut.dts1
-rw-r--r--arch/powerpc/boot/dts/warp.dts1
-rw-r--r--arch/powerpc/boot/dts/yosemite.dts304
-rw-r--r--arch/powerpc/boot/ebony.c3
-rw-r--r--arch/powerpc/boot/libfdt-wrapper.c2
-rw-r--r--arch/powerpc/boot/mpc52xx-psc.c9
-rw-r--r--arch/powerpc/boot/mpsc.c2
-rw-r--r--arch/powerpc/boot/mv64x60.c4
-rw-r--r--arch/powerpc/boot/mv64x60_i2c.c2
-rw-r--r--arch/powerpc/boot/ns16550.c10
-rw-r--r--arch/powerpc/boot/ops.h1
-rw-r--r--arch/powerpc/boot/prpmc2800.c23
-rw-r--r--arch/powerpc/boot/ps3-head.S25
-rw-r--r--arch/powerpc/boot/ps3.c23
-rw-r--r--arch/powerpc/boot/serial.c2
-rw-r--r--arch/powerpc/boot/simpleboot.c84
-rw-r--r--arch/powerpc/boot/treeboot-walnut.c2
-rw-r--r--arch/powerpc/boot/virtex405-head.S30
-rwxr-xr-xarch/powerpc/boot/wrapper32
-rw-r--r--arch/powerpc/configs/40x/ep405_defconfig (renamed from arch/powerpc/configs/ep405_defconfig)0
-rw-r--r--arch/powerpc/configs/40x/kilauea_defconfig (renamed from arch/powerpc/configs/kilauea_defconfig)0
-rw-r--r--arch/powerpc/configs/40x/makalu_defconfig (renamed from arch/powerpc/configs/makalu_defconfig)0
-rw-r--r--arch/powerpc/configs/40x/walnut_defconfig (renamed from arch/powerpc/configs/walnut_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/bamboo_defconfig (renamed from arch/powerpc/configs/bamboo_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/canyonlands_defconfig721
-rw-r--r--arch/powerpc/configs/44x/ebony_defconfig (renamed from arch/powerpc/configs/ebony_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/katmai_defconfig (renamed from arch/powerpc/configs/katmai_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/rainier_defconfig (renamed from arch/powerpc/configs/rainier_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/sequoia_defconfig (renamed from arch/powerpc/configs/sequoia_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/taishan_defconfig (renamed from arch/powerpc/configs/taishan_defconfig)0
-rw-r--r--arch/powerpc/configs/44x/warp_defconfig (renamed from arch/powerpc/configs/warp_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc8313_rdb_defconfig (renamed from arch/powerpc/configs/mpc8313_rdb_defconfig)8
-rw-r--r--arch/powerpc/configs/83xx/mpc8315_rdb_defconfig (renamed from arch/powerpc/configs/mpc8315_rdb_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_mds_defconfig (renamed from arch/powerpc/configs/mpc832x_mds_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_rdb_defconfig (renamed from arch/powerpc/configs/mpc832x_rdb_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itx_defconfig (renamed from arch/powerpc/configs/mpc834x_itx_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig (renamed from arch/powerpc/configs/mpc834x_itxgp_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_mds_defconfig (renamed from arch/powerpc/configs/mpc834x_mds_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc836x_mds_defconfig (renamed from arch/powerpc/configs/mpc836x_mds_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc837x_mds_defconfig (renamed from arch/powerpc/configs/mpc837x_mds_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/mpc837x_rdb_defconfig (renamed from arch/powerpc/configs/mpc837x_rdb_defconfig)0
-rw-r--r--arch/powerpc/configs/83xx/sbc834x_defconfig (renamed from arch/powerpc/configs/sbc834x_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/ksi8560_defconfig899
-rw-r--r--arch/powerpc/configs/85xx/mpc8540_ads_defconfig (renamed from arch/powerpc/configs/mpc8540_ads_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/mpc8544_ds_defconfig (renamed from arch/powerpc/configs/mpc8544_ds_defconfig)17
-rw-r--r--arch/powerpc/configs/85xx/mpc8560_ads_defconfig (renamed from arch/powerpc/configs/mpc8560_ads_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/mpc8568mds_defconfig (renamed from arch/powerpc/configs/mpc8568mds_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/mpc8572_ds_defconfig (renamed from arch/powerpc/configs/mpc8572_ds_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/mpc85xx_cds_defconfig (renamed from arch/powerpc/configs/mpc85xx_cds_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/sbc8548_defconfig (renamed from arch/powerpc/configs/sbc8548_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/sbc8560_defconfig (renamed from arch/powerpc/configs/sbc8560_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/stx_gp3_defconfig (renamed from arch/powerpc/configs/stx_gp3_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/tqm8540_defconfig (renamed from arch/powerpc/configs/tqm8540_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/tqm8541_defconfig (renamed from arch/powerpc/configs/tqm8541_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/tqm8555_defconfig (renamed from arch/powerpc/configs/tqm8555_defconfig)0
-rw-r--r--arch/powerpc/configs/85xx/tqm8560_defconfig (renamed from arch/powerpc/configs/tqm8560_defconfig)0
-rw-r--r--arch/powerpc/configs/chrp32_defconfig7
-rw-r--r--arch/powerpc/configs/g5_defconfig7
-rw-r--r--arch/powerpc/configs/iseries_defconfig7
-rw-r--r--arch/powerpc/configs/maple_defconfig131
-rw-r--r--arch/powerpc/configs/mpc83xx_defconfig164
-rw-r--r--arch/powerpc/configs/pmac32_defconfig7
-rw-r--r--arch/powerpc/configs/ppc40x_defconfig896
-rw-r--r--arch/powerpc/configs/ppc44x_defconfig14
-rw-r--r--arch/powerpc/configs/ppc64_defconfig8
-rw-r--r--arch/powerpc/configs/pseries_defconfig8
-rw-r--r--arch/powerpc/configs/sbc8641d_defconfig1342
-rw-r--r--arch/powerpc/kernel/Makefile1
-rw-r--r--arch/powerpc/kernel/asm-offsets.c10
-rw-r--r--arch/powerpc/kernel/btext.c3
-rw-r--r--arch/powerpc/kernel/cpu_setup_44x.S5
-rw-r--r--arch/powerpc/kernel/cputable.c28
-rw-r--r--arch/powerpc/kernel/crash.c3
-rw-r--r--arch/powerpc/kernel/crash_dump.c3
-rw-r--r--arch/powerpc/kernel/entry_32.S30
-rw-r--r--arch/powerpc/kernel/entry_64.S30
-rw-r--r--arch/powerpc/kernel/head_32.S22
-rw-r--r--arch/powerpc/kernel/head_44x.S4
-rw-r--r--arch/powerpc/kernel/head_64.S69
-rw-r--r--arch/powerpc/kernel/head_booke.h33
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S44
-rw-r--r--arch/powerpc/kernel/ibmebus.c12
-rw-r--r--arch/powerpc/kernel/iommu.c4
-rw-r--r--arch/powerpc/kernel/irq.c18
-rw-r--r--arch/powerpc/kernel/isa-bridge.c6
-rw-r--r--arch/powerpc/kernel/lparcfg.c12
-rw-r--r--arch/powerpc/kernel/machine_kexec.c3
-rw-r--r--arch/powerpc/kernel/paca.c34
-rw-r--r--arch/powerpc/kernel/ppc32.h2
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c7
-rw-r--r--arch/powerpc/kernel/process.c33
-rw-r--r--arch/powerpc/kernel/prom.c120
-rw-r--r--arch/powerpc/kernel/prom_init.c8
-rw-r--r--arch/powerpc/kernel/ptrace32.c27
-rw-r--r--arch/powerpc/kernel/rtas.c4
-rw-r--r--arch/powerpc/kernel/rtas_flash.c2
-rw-r--r--arch/powerpc/kernel/rtas_pci.c29
-rw-r--r--arch/powerpc/kernel/setup-common.c11
-rw-r--r--arch/powerpc/kernel/setup_32.c14
-rw-r--r--arch/powerpc/kernel/setup_64.c8
-rw-r--r--arch/powerpc/kernel/signal_32.c19
-rw-r--r--arch/powerpc/kernel/stacktrace.c47
-rw-r--r--arch/powerpc/kernel/sys_ppc32.c5
-rw-r--r--arch/powerpc/kernel/vdso.c3
-rw-r--r--arch/powerpc/kernel/vio.c10
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S51
-rw-r--r--arch/powerpc/lib/rheap.c4
-rw-r--r--arch/powerpc/lib/string.S14
-rw-r--r--arch/powerpc/math-emu/fabs.c2
-rw-r--r--arch/powerpc/math-emu/fadd.c2
-rw-r--r--arch/powerpc/math-emu/fadds.c2
-rw-r--r--arch/powerpc/math-emu/fcmpo.c2
-rw-r--r--arch/powerpc/math-emu/fcmpu.c2
-rw-r--r--arch/powerpc/math-emu/fctiw.c2
-rw-r--r--arch/powerpc/math-emu/fctiwz.c2
-rw-r--r--arch/powerpc/math-emu/fdiv.c6
-rw-r--r--arch/powerpc/math-emu/fdivs.c6
-rw-r--r--arch/powerpc/math-emu/fmadd.c2
-rw-r--r--arch/powerpc/math-emu/fmadds.c2
-rw-r--r--arch/powerpc/math-emu/fmr.c2
-rw-r--r--arch/powerpc/math-emu/fmsub.c2
-rw-r--r--arch/powerpc/math-emu/fmsubs.c2
-rw-r--r--arch/powerpc/math-emu/fmul.c2
-rw-r--r--arch/powerpc/math-emu/fmuls.c2
-rw-r--r--arch/powerpc/math-emu/fnabs.c2
-rw-r--r--arch/powerpc/math-emu/fneg.c2
-rw-r--r--arch/powerpc/math-emu/fnmadd.c2
-rw-r--r--arch/powerpc/math-emu/fnmadds.c2
-rw-r--r--arch/powerpc/math-emu/fnmsub.c2
-rw-r--r--arch/powerpc/math-emu/fnmsubs.c2
-rw-r--r--arch/powerpc/math-emu/fres.c2
-rw-r--r--arch/powerpc/math-emu/frsp.c2
-rw-r--r--arch/powerpc/math-emu/frsqrte.c2
-rw-r--r--arch/powerpc/math-emu/fsel.c2
-rw-r--r--arch/powerpc/math-emu/fsqrt.c2
-rw-r--r--arch/powerpc/math-emu/fsqrts.c2
-rw-r--r--arch/powerpc/math-emu/fsub.c2
-rw-r--r--arch/powerpc/math-emu/fsubs.c2
-rw-r--r--arch/powerpc/math-emu/lfd.c2
-rw-r--r--arch/powerpc/math-emu/lfs.c2
-rw-r--r--arch/powerpc/math-emu/mcrfs.c4
-rw-r--r--arch/powerpc/math-emu/mffs.c2
-rw-r--r--arch/powerpc/math-emu/mtfsb0.c2
-rw-r--r--arch/powerpc/math-emu/mtfsb1.c2
-rw-r--r--arch/powerpc/math-emu/mtfsf.c2
-rw-r--r--arch/powerpc/math-emu/mtfsfi.c2
-rw-r--r--arch/powerpc/math-emu/stfd.c2
-rw-r--r--arch/powerpc/math-emu/stfiwx.c2
-rw-r--r--arch/powerpc/math-emu/stfs.c2
-rw-r--r--arch/powerpc/mm/40x_mmu.c2
-rw-r--r--arch/powerpc/mm/44x_mmu.c2
-rw-r--r--arch/powerpc/mm/Makefile2
-rw-r--r--arch/powerpc/mm/fsl_booke_mmu.c48
-rw-r--r--arch/powerpc/mm/hash_utils_64.c32
-rw-r--r--arch/powerpc/mm/init_32.c27
-rw-r--r--arch/powerpc/mm/init_64.c7
-rw-r--r--arch/powerpc/mm/lmb.c357
-rw-r--r--arch/powerpc/mm/mem.c21
-rw-r--r--arch/powerpc/mm/mmu_decl.h4
-rw-r--r--arch/powerpc/mm/numa.c3
-rw-r--r--arch/powerpc/mm/pgtable_32.c5
-rw-r--r--arch/powerpc/mm/ppc_mmu_32.c15
-rw-r--r--arch/powerpc/mm/stab.c4
-rw-r--r--arch/powerpc/oprofile/cell/spu_task_sync.c12
-rw-r--r--arch/powerpc/oprofile/cell/vma_map.c10
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c14
-rw-r--r--arch/powerpc/platforms/40x/ep405.c2
-rw-r--r--arch/powerpc/platforms/40x/kilauea.c4
-rw-r--r--arch/powerpc/platforms/40x/makalu.c2
-rw-r--r--arch/powerpc/platforms/40x/virtex.c2
-rw-r--r--arch/powerpc/platforms/40x/walnut.c4
-rw-r--r--arch/powerpc/platforms/44x/44x.h1
-rw-r--r--arch/powerpc/platforms/44x/Kconfig27
-rw-r--r--arch/powerpc/platforms/44x/Makefile4
-rw-r--r--arch/powerpc/platforms/44x/bamboo.c15
-rw-r--r--arch/powerpc/platforms/44x/canyonlands.c63
-rw-r--r--arch/powerpc/platforms/44x/ebony.c5
-rw-r--r--arch/powerpc/platforms/44x/idle.c67
-rw-r--r--arch/powerpc/platforms/44x/katmai.c5
-rw-r--r--arch/powerpc/platforms/44x/misc_44x.S11
-rw-r--r--arch/powerpc/platforms/44x/rainier.c4
-rw-r--r--arch/powerpc/platforms/44x/sequoia.c4
-rw-r--r--arch/powerpc/platforms/44x/taishan.c5
-rw-r--r--arch/powerpc/platforms/44x/warp-nand.c3
-rw-r--r--arch/powerpc/platforms/44x/warp.c6
-rw-r--r--arch/powerpc/platforms/52xx/lite5200.c4
-rw-r--r--arch/powerpc/platforms/82xx/Kconfig3
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_rdb.c1
-rw-r--r--arch/powerpc/platforms/83xx/mpc83xx.h2
-rw-r--r--arch/powerpc/platforms/83xx/usb.c12
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig13
-rw-r--r--arch/powerpc/platforms/85xx/Makefile1
-rw-r--r--arch/powerpc/platforms/85xx/ksi8560.c257
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c2
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c15
-rw-r--r--arch/powerpc/platforms/86xx/Kconfig8
-rw-r--r--arch/powerpc/platforms/86xx/Makefile1
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c4
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c14
-rw-r--r--arch/powerpc/platforms/86xx/sbc8641d.c164
-rw-r--r--arch/powerpc/platforms/8xx/Kconfig4
-rw-r--r--arch/powerpc/platforms/8xx/m8xx_setup.c7
-rw-r--r--arch/powerpc/platforms/Kconfig8
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype2
-rw-r--r--arch/powerpc/platforms/cell/iommu.c10
-rw-r--r--arch/powerpc/platforms/cell/pervasive.c2
-rw-r--r--arch/powerpc/platforms/cell/ras.c10
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c8
-rw-r--r--arch/powerpc/platforms/cell/spu_callbacks.c2
-rw-r--r--arch/powerpc/platforms/cell/spu_manage.c8
-rw-r--r--arch/powerpc/platforms/cell/spufs/coredump.c8
-rw-r--r--arch/powerpc/platforms/cell/spufs/file.c8
-rw-r--r--arch/powerpc/platforms/cell/spufs/run.c14
-rw-r--r--arch/powerpc/platforms/cell/spufs/switch.c2
-rw-r--r--arch/powerpc/platforms/celleb/beat.c17
-rw-r--r--arch/powerpc/platforms/celleb/beat.h4
-rw-r--r--arch/powerpc/platforms/celleb/beat_wrapper.h3
-rw-r--r--arch/powerpc/platforms/celleb/htab.c7
-rw-r--r--arch/powerpc/platforms/celleb/interrupt.c26
-rw-r--r--arch/powerpc/platforms/celleb/scc_epci.c8
-rw-r--r--arch/powerpc/platforms/celleb/scc_sio.c4
-rw-r--r--arch/powerpc/platforms/celleb/spu_priv1.c3
-rw-r--r--arch/powerpc/platforms/celleb/udbg_beat.c5
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c10
-rw-r--r--arch/powerpc/platforms/embedded6xx/prpmc2800.c4
-rw-r--r--arch/powerpc/platforms/iseries/exception.S12
-rw-r--r--arch/powerpc/platforms/iseries/ipl_parms.h2
-rw-r--r--arch/powerpc/platforms/iseries/lpardata.c121
-rw-r--r--arch/powerpc/platforms/iseries/naca.h2
-rw-r--r--arch/powerpc/platforms/iseries/pci.c3
-rw-r--r--arch/powerpc/platforms/iseries/release_data.h2
-rw-r--r--arch/powerpc/platforms/iseries/spcomm_area.h2
-rw-r--r--arch/powerpc/platforms/iseries/vpd_areas.h4
-rw-r--r--arch/powerpc/platforms/maple/pci.c47
-rw-r--r--arch/powerpc/platforms/maple/setup.c4
-rw-r--r--arch/powerpc/platforms/pasemi/dma_lib.c144
-rw-r--r--arch/powerpc/platforms/pasemi/iommu.c19
-rw-r--r--arch/powerpc/platforms/powermac/setup.c2
-rw-r--r--arch/powerpc/platforms/ps3/device-init.c78
-rw-r--r--arch/powerpc/platforms/ps3/htab.c3
-rw-r--r--arch/powerpc/platforms/ps3/interrupt.c2
-rw-r--r--arch/powerpc/platforms/ps3/mm.c3
-rw-r--r--arch/powerpc/platforms/ps3/os-area.c3
-rw-r--r--arch/powerpc/platforms/ps3/setup.c14
-rw-r--r--arch/powerpc/platforms/ps3/spu.c7
-rw-r--r--arch/powerpc/platforms/pseries/Makefile1
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c5
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c25
-rw-r--r--arch/powerpc/platforms/pseries/pci_dlpar.c2
-rw-r--r--arch/powerpc/platforms/pseries/phyp_dump.c507
-rw-r--r--arch/powerpc/platforms/pseries/pseries.h2
-rw-r--r--arch/powerpc/platforms/pseries/reconfig.c12
-rw-r--r--arch/powerpc/platforms/pseries/scanlog.c37
-rw-r--r--arch/powerpc/platforms/pseries/setup.c105
-rw-r--r--arch/powerpc/platforms/pseries/xics.c87
-rw-r--r--arch/powerpc/platforms/pseries/xics.h3
-rw-r--r--arch/powerpc/sysdev/Makefile2
-rw-r--r--arch/powerpc/sysdev/cpm1.c114
-rw-r--r--arch/powerpc/sysdev/cpm2.c105
-rw-r--r--arch/powerpc/sysdev/cpm_common.c3
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c2
-rw-r--r--arch/powerpc/sysdev/fsl_lbc.c129
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c611
-rw-r--r--arch/powerpc/sysdev/fsl_soc.h1
-rw-r--r--arch/powerpc/sysdev/mpic.c41
-rw-r--r--arch/powerpc/sysdev/mv64x60_dev.c78
-rw-r--r--arch/powerpc/sysdev/mv64x60_pci.c6
-rw-r--r--arch/powerpc/sysdev/mv64x60_pic.c4
-rw-r--r--arch/powerpc/sysdev/mv64x60_udbg.c2
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.c133
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.h59
-rw-r--r--arch/powerpc/sysdev/ppc4xx_soc.c200
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c13
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_io.c7
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_fast.c32
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c18
-rw-r--r--arch/powerpc/sysdev/rtc_cmos_setup.c2
-rw-r--r--arch/powerpc/sysdev/tsi108_dev.c4
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c4
-rw-r--r--arch/powerpc/xmon/xmon.c24
-rw-r--r--arch/ppc/8xx_io/commproc.c2
-rw-r--r--arch/ppc/8xx_io/fec.c4
-rw-r--r--arch/ppc/kernel/head.S17
-rw-r--r--arch/ppc/mm/init.c1
-rw-r--r--arch/ppc/platforms/radstone_ppc7d.c8
-rw-r--r--arch/ppc/syslib/mpc52xx_setup.c2
-rw-r--r--arch/sparc64/Kconfig1
-rw-r--r--drivers/block/viodasd.c2
-rw-r--r--drivers/char/hvc_beat.c4
-rw-r--r--drivers/char/xilinx_hwicap/buffer_icap.c22
-rw-r--r--drivers/char/xilinx_hwicap/buffer_icap.h5
-rw-r--r--drivers/char/xilinx_hwicap/fifo_icap.c31
-rw-r--r--drivers/char/xilinx_hwicap/fifo_icap.h1
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.c63
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.h24
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c219
-rw-r--r--drivers/net/Makefile3
-rw-r--r--drivers/net/iseries_veth.c3
-rw-r--r--drivers/net/pasemi_mac.c355
-rw-r--r--drivers/net/pasemi_mac.h35
-rw-r--r--drivers/net/pasemi_mac_ethtool.c159
-rw-r--r--drivers/net/ps3_gelic_net.c81
-rw-r--r--drivers/net/ps3_gelic_net.h20
-rw-r--r--drivers/net/ucc_geth.c8
-rw-r--r--drivers/net/ucc_geth_mii.c11
-rw-r--r--drivers/of/Kconfig12
-rw-r--r--drivers/of/Makefile2
-rw-r--r--drivers/of/base.c26
-rw-r--r--drivers/of/gpio.c242
-rw-r--r--drivers/of/of_i2c.c115
-rw-r--r--drivers/ps3/ps3-sys-manager.c74
-rw-r--r--drivers/ps3/sys-manager-core.c16
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h3
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c19
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c14
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c52
-rw-r--r--drivers/serial/of_serial.c4
-rw-r--r--drivers/serial/ucc_uart.c16
-rw-r--r--include/asm-powerpc/Kbuild2
-rw-r--r--include/asm-powerpc/abs_addr.h3
-rw-r--r--include/asm-powerpc/bitops.h32
-rw-r--r--include/asm-powerpc/cpm.h14
-rw-r--r--include/asm-powerpc/cpm1.h13
-rw-r--r--include/asm-powerpc/cpm2.h11
-rw-r--r--include/asm-powerpc/cputhreads.h2
-rw-r--r--include/asm-powerpc/dcr-native.h17
-rw-r--r--include/asm-powerpc/dcr-regs.h78
-rw-r--r--include/asm-powerpc/exception.h6
-rw-r--r--include/asm-powerpc/fsl_lbc.h311
-rw-r--r--include/asm-powerpc/gpio.h56
-rw-r--r--include/asm-powerpc/hw_irq.h13
-rw-r--r--include/asm-powerpc/immap_qe.h3
-rw-r--r--include/asm-powerpc/irqflags.h37
-rw-r--r--include/asm-powerpc/iseries/alpaca.h31
-rw-r--r--include/asm-powerpc/iseries/it_lp_reg_save.h85
-rw-r--r--include/asm-powerpc/lmb.h82
-rw-r--r--include/asm-powerpc/machdep.h5
-rw-r--r--include/asm-powerpc/macio.h2
-rw-r--r--include/asm-powerpc/mmu-40x.h2
-rw-r--r--include/asm-powerpc/mmu-44x.h2
-rw-r--r--include/asm-powerpc/mmu-8xx.h2
-rw-r--r--include/asm-powerpc/mmu-fsl-booke.h6
-rw-r--r--include/asm-powerpc/mmu-hash32.h2
-rw-r--r--include/asm-powerpc/mmu-hash64.h3
-rw-r--r--include/asm-powerpc/paca.h12
-rw-r--r--include/asm-powerpc/page.h1
-rw-r--r--include/asm-powerpc/page_32.h2
-rw-r--r--include/asm-powerpc/pasemi_dma.h77
-rw-r--r--include/asm-powerpc/pci-bridge.h4
-rw-r--r--include/asm-powerpc/pgtable-ppc32.h8
-rw-r--r--include/asm-powerpc/phyp_dump.h47
-rw-r--r--include/asm-powerpc/pmi.h2
-rw-r--r--include/asm-powerpc/ppc4xx.h18
-rw-r--r--include/asm-powerpc/ps3.h7
-rw-r--r--include/asm-powerpc/ptrace.h9
-rw-r--r--include/asm-powerpc/qe.h12
-rw-r--r--include/asm-powerpc/rwsem.h35
-rw-r--r--include/asm-powerpc/sparsemem.h1
-rw-r--r--include/asm-powerpc/spinlock.h1
-rw-r--r--include/asm-powerpc/string.h2
-rw-r--r--include/asm-powerpc/system.h1
-rw-r--r--include/asm-powerpc/types.h7
-rw-r--r--include/asm-sparc64/lmb.h10
-rw-r--r--include/linux/lmb.h85
-rw-r--r--include/linux/of.h1
-rw-r--r--include/linux/of_gpio.h69
-rw-r--r--include/linux/of_i2c.h24
-rw-r--r--lib/Kconfig3
-rw-r--r--lib/Makefile2
-rw-r--r--lib/lmb.c428
421 files changed, 14541 insertions, 4552 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f4839606988..dfb5bef2401 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -954,6 +954,8 @@ and is between 256 and 4096 characters. It is defined in the file
l2cr= [PPC]
+ l3cr= [PPC]
+
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 7b4e8a70882..4cc780024e6 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -59,12 +59,39 @@ Table of Contents
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
- VII - Specifying interrupt information for devices
+ VII - Marvell Discovery mv64[345]6x System Controller chips
+ 1) The /system-controller node
+ 2) Child nodes of /system-controller
+ a) Marvell Discovery MDIO bus
+ b) Marvell Discovery ethernet controller
+ c) Marvell Discovery PHY nodes
+ d) Marvell Discovery SDMA nodes
+ e) Marvell Discovery BRG nodes
+ f) Marvell Discovery CUNIT nodes
+ g) Marvell Discovery MPSCROUTING nodes
+ h) Marvell Discovery MPSCINTR nodes
+ i) Marvell Discovery MPSC nodes
+ j) Marvell Discovery Watch Dog Timer nodes
+ k) Marvell Discovery I2C nodes
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+ o) Marvell Discovery PCI host bridge node
+ p) Marvell Discovery CPU Error nodes
+ q) Marvell Discovery SRAM Controller nodes
+ r) Marvell Discovery PCI Error Handler nodes
+ s) Marvell Discovery Memory Controller nodes
+
+ VIII - Specifying interrupt information for devices
1) interrupts property
2) interrupt-parent property
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
+ VIII - Specifying GPIO information for devices
+ 1) gpios property
+ 2) gpio-controller nodes
+
Appendix A - Sample SOC node for MPC8540
@@ -1269,10 +1296,6 @@ platforms are moved over to use the flattened-device-tree model.
Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
@@ -1622,8 +1645,7 @@ platforms are moved over to use the flattened-device-tree model.
- device_type : should be "network", "hldc", "uart", "transparent"
"bisync", "atm", or "serial".
- compatible : could be "ucc_geth" or "fsl_atm" and so on.
- - model : should be "UCC".
- - device-id : the ucc number(1-8), corresponding to UCCx in UM.
+ - cell-index : the ucc number(1-8), corresponding to UCCx in UM.
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
@@ -1667,10 +1689,6 @@ platforms are moved over to use the flattened-device-tree model.
- phy-handle : The phandle for the PHY connected to this controller.
Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
@@ -1680,8 +1698,7 @@ platforms are moved over to use the flattened-device-tree model.
ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
- device-id = <1>;
+ cell-index = <1>;
reg = <2000 200>;
interrupts = <a0 0>;
interrupt-parent = <700>;
@@ -1995,7 +2012,6 @@ platforms are moved over to use the flattened-device-tree model.
interrupts = <20 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
- linux,network-index = <0>;
fsl,cpm-command = <12000300>;
};
@@ -2217,12 +2233,6 @@ platforms are moved over to use the flattened-device-tree model.
EMAC, that is the content of the current (bogus) "phy-port"
property.
- Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
-
Optional properties:
- phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
a search is performed.
@@ -2246,7 +2256,6 @@ platforms are moved over to use the flattened-device-tree model.
Example:
EMAC0: ethernet@40000800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
@@ -2817,9 +2826,528 @@ platforms are moved over to use the flattened-device-tree model.
};
- More devices will be defined as this spec matures.
+VII - Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system. In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains. Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+ This node is used to represent the system-controller and must be
+ present when the system uses a system contller chip. The top-level
+ system-controller node contains information that is global to all
+ devices within the system controller chip. The node name begins
+ with "system-controller" followed by the unit address, which is
+ the base address of the memory-mapped register set for the system
+ controller chip.
+
+ Required properties:
+
+ - ranges : Describes the translation of system controller addresses
+ for memory mapped registers.
+ - clock-frequency: Contains the main clock frequency for the system
+ controller chip.
+ - reg : This property defines the address and size of the
+ memory-mapped registers contained within the system controller
+ chip. The address specified in the "reg" property should match
+ the unit address of the system-controller node.
+ - #address-cells : Address representation for system controller
+ devices. This field represents the number of cells needed to
+ represent the address of the memory-mapped registers of devices
+ within the system controller chip.
+ - #size-cells : Size representation for for the memory-mapped
+ registers within the system controller chip.
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts.
+
+ Optional properties:
+
+ - model : The specific model of the system controller chip. Such
+ as, "mv64360", "mv64460", or "mv64560".
+ - compatible : A string identifying the compatibility identifiers
+ of the system controller chip.
+
+ The system-controller node contains child nodes for each system
+ controller device that the platform uses. Nodes should not be created
+ for devices which exist on the system controller chip but are not used
+
+ Example Marvell Discovery mv64360 system-controller node:
+
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+ [ child node definitions... ]
+ }
+
+2) Child nodes of /system-controller
+
+ a) Marvell Discovery MDIO bus
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - #address-cells : Should be <1>
+ - #size-cells : Should be <0>
+ - device_type : Should be "mdio"
+ - compatible : Should be "marvell,mv64360-mdio"
+
+ Example:
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64360-mdio";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Marvell Discovery ethernet controller
+
+ The Discover ethernet controller is described with two levels
+ of nodes. The first level describes an ethernet silicon block
+ and the second level describes up to 3 ethernet nodes within
+ that block. The reason for the multiple levels is that the
+ registers for the node are interleaved within a single set
+ of registers. The "ethernet-block" level describes the
+ shared register set, and the "ethernet" nodes describe ethernet
+ port-specific properties.
+
+ Ethernet block node
+
+ Required properties:
+ - #address-cells : <1>
+ - #size-cells : <0>
+ - compatible : "marvell,mv64360-eth-block"
+ - reg : Offset and length of the register set for this block
+
+ Example Discovery Ethernet block node:
+ ethernet-block@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-block";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
+ .......
+ };
+ };
+
+ Ethernet port node
+
+ Required properties:
+ - device_type : Should be "network".
+ - compatible : Should be "marvell,mv64360-eth".
+ - reg : Should be <0>, <1>, or <2>, according to which registers
+ within the silicon block the device uses.
+ - interrupts : <a> where a is the interrupt number for the port.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+ - phy : the phandle for the PHY connected to this ethernet
+ controller.
+ - local-mac-address : 6 bytes, MAC address
+
+ Example Discovery Ethernet port node:
+ ethernet@0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+
+
+ c) Marvell Discovery PHY nodes
+
+ Required properties:
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a> where a is the interrupt number for this phy.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+
+ Example Discovery PHY node:
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+
+
+ d) Marvell Discovery SDMA nodes
+
+ Represent DMA hardware associated with the MPSC (multiprotocol
+ serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-sdma"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the DMA
+ device.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SDMA node:
+ sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ e) Marvell Discovery BRG nodes
+
+ Represent baud rate generator hardware associated with the MPSC
+ (multiprotocol serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-brg"
+ - reg : Offset and length of the register set for this device
+ - clock-src : A value from 0 to 15 which selects the clock
+ source for the baud rate generator. This value corresponds
+ to the CLKS value in the BRGx configuration register. See
+ the mv64x60 User's Manual.
+ - clock-frequence : The frequency (in Hz) of the baud rate
+ generator's input clock.
+ - current-speed : The current speed setting (presumably by
+ firmware) of the baud rate generator.
+
+ Example Discovery BRG node:
+ brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
+ };
+
+
+ f) Marvell Discovery CUNIT nodes
+
+ Represent the Serial Communications Unit device hardware.
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ cunit@f200 {
+ reg = <0xf200 0x200>;
+ };
+
+
+ g) Marvell Discovery MPSCROUTING nodes
+
+ Represent the Discovery's MPSC routing hardware
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ mpscrouting@b500 {
+ reg = <0xb400 0xc>;
+ };
+
+
+ h) Marvell Discovery MPSCINTR nodes
+
+ Represent the Discovery's MPSC DMA interrupt hardware registers
+ (SDMA cause and mask registers).
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
-VII - Specifying interrupt information for devices
+ Example Discovery MPSCINTR node:
+ mpsintr@b800 {
+ reg = <0xb800 0x100>;
+ };
+
+
+ i) Marvell Discovery MPSC nodes
+
+ Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+ serial port.
+
+ Required properties:
+ - device_type : "serial"
+ - compatible : "marvell,mv64360-mpsc"
+ - reg : Offset and length of the register set for this device
+ - sdma : the phandle for the SDMA node used by this port
+ - brg : the phandle for the BRG node used by this port
+ - cunit : the phandle for the CUNIT node used by this port
+ - mpscrouting : the phandle for the MPSCROUTING node used by this port
+ - mpscintr : the phandle for the MPSCINTR node used by this port
+ - cell-index : the hardware index of this cell in the MPSC core
+ - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+ register
+ - interrupts : <a> where a is the interrupt number for the MPSC.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery MPSCINTR node:
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ max_idle = <40>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ j) Marvell Discovery Watch Dog Timer nodes
+
+ Represent the Discovery's watchdog timer hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-wdt"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery Watch Dog Timer node:
+ wdt@b410 {
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+
+ k) Marvell Discovery I2C nodes
+
+ Represent the Discovery's I2C hardware
+
+ Required properties:
+ - device_type : "i2c"
+ - compatible : "marvell,mv64360-i2c"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the I2C.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery I2C node:
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+ Represent the Discovery's PIC hardware
+
+ Required properties:
+ - #interrupt-cells : <1>
+ - #address-cells : <0>
+ - compatible : "marvell,mv64360-pic"
+ - reg : Offset and length of the register set for this device
+ - interrupt-controller
+
+ Example Discovery PIC node:
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
+ interrupt-controller;
+ };
+
+
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+ Represent the Discovery's MPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-mpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPP node:
+ mpp@f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+ Represent the Discovery's GPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-gpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery GPP node:
+ gpp@f000 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+
+ o) Marvell Discovery PCI host bridge node
+
+ Represents the Discovery's PCI host bridge device. The properties
+ for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+ 1275-1994. A typical value for the compatible property is
+ "marvell,mv64360-pci".
+
+ Example Discovery PCI host bridge node
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
+
+ /* IDSEL 0x0b */
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
+
+ /* IDSEL 0x0c */
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
+
+ /* IDSEL 0x0d */
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
+ >;
+ };
+
+
+ p) Marvell Discovery CPU Error nodes
+
+ Represent the Discovery's CPU error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-cpu-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery CPU Error node:
+ cpu-error@0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ q) Marvell Discovery SRAM Controller nodes
+
+ Represent the Discovery's SRAM controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-sram-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SRAM Controller node:
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ r) Marvell Discovery PCI Error Handler nodes
+
+ Represent the Discovery's PCI error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-pci-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery PCI Error Handler node:
+ pci-error@1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ s) Marvell Discovery Memory Controller nodes
+
+ Represent the Discovery's memory controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-mem-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery Memory Controller node:
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+VIII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
@@ -2905,6 +3433,54 @@ encodings listed below:
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
+VIII - Specifying GPIO information for devices
+==============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+ &gpio-controller2-phandle gpio2-specifier
+ 0 /* holes are permitted, means no GPIO 3 */
+ &gpio-controller4-phandle gpio4-specifier
+ ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+ node {
+ gpios = <&qe_pio_e 18 0>;
+ };
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
Appendix A - Sample SOC node for MPC8540
========================================
diff --git a/Documentation/powerpc/phyp-assisted-dump.txt b/Documentation/powerpc/phyp-assisted-dump.txt
new file mode 100644
index 00000000000..c4682b982a2
--- /dev/null
+++ b/Documentation/powerpc/phyp-assisted-dump.txt
@@ -0,0 +1,127 @@
+
+ Hypervisor-Assisted Dump
+ ------------------------
+ November 2007
+
+The goal of hypervisor-assisted dump is to enable the dump of
+a crashed system, and to do so from a fully-reset system, and
+to minimize the total elapsed time until the system is back
+in production use.
+
+As compared to kdump or other strategies, hypervisor-assisted
+dump offers several strong, practical advantages:
+
+-- Unlike kdump, the system has been reset, and loaded
+ with a fresh copy of the kernel. In particular,
+ PCI and I/O devices have been reinitialized and are
+ in a clean, consistent state.
+-- As the dump is performed, the dumped memory becomes
+ immediately available to the system for normal use.
+-- After the dump is completed, no further reboots are
+ required; the system will be fully usable, and running
+ in it's normal, production mode on it normal kernel.
+
+The above can only be accomplished by coordination with,
+and assistance from the hypervisor. The procedure is
+as follows:
+
+-- When a system crashes, the hypervisor will save
+ the low 256MB of RAM to a previously registered
+ save region. It will also save system state, system
+ registers, and hardware PTE's.
+
+-- After the low 256MB area has been saved, the
+ hypervisor will reset PCI and other hardware state.
+ It will *not* clear RAM. It will then launch the
+ bootloader, as normal.
+
+-- The freshly booted kernel will notice that there
+ is a new node (ibm,dump-kernel) in the device tree,
+ indicating that there is crash data available from
+ a previous boot. It will boot into only 256MB of RAM,
+ reserving the rest of system memory.
+
+-- Userspace tools will parse /sys/kernel/release_region
+ and read /proc/vmcore to obtain the contents of memory,
+ which holds the previous crashed kernel. The userspace
+ tools may copy this info to disk, or network, nas, san,
+ iscsi, etc. as desired.
+
+ For Example: the values in /sys/kernel/release-region
+ would look something like this (address-range pairs).
+ CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
+ DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
+
+-- As the userspace tools complete saving a portion of
+ dump, they echo an offset and size to
+ /sys/kernel/release_region to release the reserved
+ memory back to general use.
+
+ An example of this is:
+ "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ which will release 256MB at the 1GB boundary.
+
+Please note that the hypervisor-assisted dump feature
+is only available on Power6-based systems with recent
+firmware versions.
+
+Implementation details:
+----------------------
+
+During boot, a check is made to see if firmware supports
+this feature on this particular machine. If it does, then
+we check to see if a active dump is waiting for us. If yes
+then everything but 256 MB of RAM is reserved during early
+boot. This area is released once we collect a dump from user
+land scripts that are run. If there is dump data, then
+the /sys/kernel/release_region file is created, and
+the reserved memory is held.
+
+If there is no waiting dump data, then only the highest
+256MB of the ram is reserved as a scratch area. This area
+is *not* released: this region will be kept permanently
+reserved, so that it can act as a receptacle for a copy
+of the low 256MB in the case a crash does occur. See,
+however, "open issues" below, as to whether
+such a reserved region is really needed.
+
+Currently the dump will be copied from /proc/vmcore to a
+a new file upon user intervention. The starting address
+to be read and the range for each data point in provided
+in /sys/kernel/release_region.
+
+The tools to examine the dump will be same as the ones
+used for kdump.
+
+General notes:
+--------------
+Security: please note that there are potential security issues
+with any sort of dump mechanism. In particular, plaintext
+(unencrypted) data, and possibly passwords, may be present in
+the dump data. Userspace tools must take adequate precautions to
+preserve security.
+
+Open issues/ToDo:
+------------
+ o The various code paths that tell the hypervisor that a crash
+ occurred, vs. it simply being a normal reboot, should be
+ reviewed, and possibly clarified/fixed.
+
+ o Instead of using /sys/kernel, should there be a /sys/dump
+ instead? There is a dump_subsys being created by the s390 code,
+ perhaps the pseries code should use a similar layout as well.
+
+ o Is reserving a 256MB region really required? The goal of
+ reserving a 256MB scratch area is to make sure that no
+ important crash data is clobbered when the hypervisor
+ save low mem to the scratch area. But, if one could assure
+ that nothing important is located in some 256MB area, then
+ it would not need to be reserved. Something that can be
+ improved in subsequent versions.
+
+ o Still working the kdump team to integrate this with kdump,
+ some work remains but this would not affect the current
+ patches.
+
+ o Still need to write a shell script, to copy the dump away.
+ Currently I am parsing it manually.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1189d8d6170..4bb2e9310a5 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -49,6 +49,19 @@ config IRQ_PER_CPU
bool
default y
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ depends on PPC64
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
@@ -81,6 +94,11 @@ config GENERIC_FIND_NEXT_BIT
bool
default y
+config GENERIC_GPIO
+ bool
+ help
+ Generic GPIO API support
+
config ARCH_NO_VIRT_TO_BUS
def_bool PPC64
@@ -91,6 +109,7 @@ config PPC
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_LMB
config EARLY_PRINTK
bool
@@ -210,15 +229,6 @@ source kernel/Kconfig.hz
source kernel/Kconfig.preempt
source "fs/Kconfig.binfmt"
-# We optimistically allocate largepages from the VM, so make the limit
-# large enough (16MB). This badly named config option is actually
-# max order + 1
-config FORCE_MAX_ZONEORDER
- int
- depends on PPC64
- default "9" if PPC_64K_PAGES
- default "13"
-
config HUGETLB_PAGE_SIZE_VARIABLE
bool
depends on HUGETLB_PAGE
@@ -307,6 +317,16 @@ config CRASH_DUMP
Don't change this unless you know what you are doing.
+config PHYP_DUMP
+ bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+ depends on PPC_PSERIES && EXPERIMENTAL
+ help
+ Hypervisor-assisted dump is meant to be a kdump replacement
+ offering robustness and speed not possible without system
+ hypervisor assistence.
+
+ If unsure, say "N"
+
config PPCBUG_NVRAM
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
default y if PPC_PREP
@@ -381,6 +401,26 @@ config PPC_64K_PAGES
while on hardware with such support, it will be used to map
normal application pages.
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ default "9" if PPC_64K_PAGES
+ default "13" if PPC64 && !PPC_64K_PAGES
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. For example, on 64-bit
+ systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
+ this in mind when choosing a value for this option.
+
config PPC_SUBPAGE_PROT
bool "Support setting protections for 4k subpages"
depends on PPC_64K_PAGES
@@ -490,6 +530,14 @@ config FSL_PCI
bool
select PPC_INDIRECT_PCI
+config 4xx_SOC
+ bool
+
+config FSL_LBC
+ bool
+ help
+ Freescale Localbus support
+
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
@@ -663,22 +711,6 @@ config CONSISTENT_SIZE
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
default "0x00200000" if NOT_COHERENT_CACHE
-config BOOT_LOAD_BOOL
- bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
- help
- This option allows you to set the initial load address of the zImage
- or zImage.initrd file. This can be useful if you are on a board
- which has a small amount of memory.
-
- Say N here unless you know what you are doing.
-
-config BOOT_LOAD
- hex "Link/load address for booting" if BOOT_LOAD_BOOL
- default "0x00400000" if 40x || 8xx || 8260
- default "0x01000000" if 44x
- default "0x00800000"
-
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index db7cc34c24d..a86d8d85321 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -269,7 +269,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR
hex "CPM UART early debug transmit descriptor address"
depends on PPC_EARLY_DEBUG_CPM
default "0xfa202008" if PPC_EP88XC
- default "0xf0000008" if CPM2
+ default "0xf0001ff8" if CPM2
default "0xff002008" if CPM1
help
This specifies the address of the transmit descriptor
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index ab5cfe8ef98..e2ec4a91cce 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -71,13 +71,11 @@ endif
LDFLAGS_vmlinux := -Bstatic
-CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH)
-AFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH)
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -ffixed-r2 -mmultiple
-KBUILD_CPPFLAGS += $(CPPFLAGS-y)
-KBUILD_AFLAGS += $(AFLAGS-y)
-KBUILD_CFLAGS += -msoft-float -pipe $(CFLAGS-y)
+CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
+KBUILD_CPPFLAGS += -Iarch/$(ARCH)
+KBUILD_AFLAGS += -Iarch/$(ARCH)
+KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
@@ -164,7 +162,7 @@ boot := arch/$(ARCH)/boot
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-bootwrapper_install:
+bootwrapper_install %.dtb:
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
define archhelp
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 1aded8f759d..5ba50c67339 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,6 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
zlib := inffast.c inflate.c inftrees.c
@@ -64,7 +65,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
fixed-head.S ep88xc.c ep405.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- cuboot-warp.c cuboot-85xx-cpm2.c
+ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+ virtex405-head.S
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -192,7 +194,7 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += zImage.holly
-image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800
+image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
@@ -216,6 +218,7 @@ image-$(CONFIG_RAINIER) += cuImage.rainier
image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
+image-$(CONFIG_YOSEMITE) += cuImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
@@ -255,6 +258,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_SBC8560) += cuImage.sbc8560
+image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
@@ -285,11 +289,11 @@ $(obj)/zImage.%: vmlinux $(wrapperbits)
$(call if_changed,wrap,$*)
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
- $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+ $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
- $(call if_changed,wrap,$*,$(dtstree)/$*.dts)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+ $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
# prefix
@@ -302,14 +306,24 @@ $(obj)/zImage.iseries: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
-$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
+$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
-$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
+ $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
@@ -326,7 +340,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
# anything not in $(targets)
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
- otheros.bld
+ otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c
index 54b33f1500e..b82cacbc60d 100644
--- a/arch/powerpc/boot/bamboo.c
+++ b/arch/powerpc/boot/bamboo.c
@@ -33,7 +33,8 @@ static void bamboo_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
- dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
+ dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
+ dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
}
void bamboo_init(void *mac0, void *mac1)
diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c
index 28296facb2a..19dc15abe43 100644
--- a/arch/powerpc/boot/cpm-serial.c
+++ b/arch/powerpc/boot/cpm-serial.c
@@ -11,6 +11,7 @@
#include "types.h"
#include "io.h"
#include "ops.h"
+#include "page.h"
struct cpm_scc {
u32 gsmrl;
@@ -42,6 +43,22 @@ struct cpm_param {
u16 tbase;
u8 rfcr;
u8 tfcr;
+ u16 mrblr;
+ u32 rstate;
+ u8 res1[4];
+ u16 rbptr;
+ u8 res2[6];
+ u32 tstate;
+ u8 res3[4];
+ u16 tbptr;
+ u8 res4[6];
+ u16 maxidl;
+ u16 idlc;
+ u16 brkln;
+ u16 brkec;
+ u16 brkcr;
+ u16 rmask;
+ u8 res5[4];
};
struct cpm_bd {
@@ -54,10 +71,10 @@ static void *cpcr;
static struct cpm_param *param;
static struct cpm_smc *smc;
static struct cpm_scc *scc;
-struct cpm_bd *tbdf, *rbdf;
+static struct cpm_bd *tbdf, *rbdf;
static u32 cpm_cmd;
-static u8 *muram_start;
-static u32 muram_offset;
+static void *cbd_addr;
+static u32 cbd_offset;
static void (*do_cmd)(int op);
static void (*enable_port)(void);
@@ -119,20 +136,25 @@ static int cpm_serial_open(void)
out_8(&param->rfcr, 0x10);
out_8(&param->tfcr, 0x10);
-
- rbdf = (struct cpm_bd *)muram_start;
- rbdf->addr = (u8 *)(rbdf + 2);
+ out_be16(&param->mrblr, 1);
+ out_be16(&param->maxidl, 0);
+ out_be16(&param->brkec, 0);
+ out_be16(&param->brkln, 0);
+ out_be16(&param->brkcr, 0);
+
+ rbdf = cbd_addr;
+ rbdf->addr = (u8 *)rbdf - 1;
rbdf->sc = 0xa000;
rbdf->len = 1;
tbdf = rbdf + 1;
- tbdf->addr = (u8 *)(rbdf + 2) + 1;
+ tbdf->addr = (u8 *)rbdf - 2;
tbdf->sc = 0x2000;
tbdf->len = 1;
sync();
- out_be16(&param->rbase, muram_offset);
- out_be16(&param->tbase, muram_offset + sizeof(struct cpm_bd));
+ out_be16(&param->rbase, cbd_offset);
+ out_be16(&param->tbase, cbd_offset + sizeof(struct cpm_bd));
do_cmd(CPM_CMD_INIT_RX_TX);
@@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(void)
int cpm_console_init(void *devp, struct serial_console_data *scdp)
{
- void *reg_virt[2];
- int is_smc = 0, is_cpm2 = 0, n;
- unsigned long reg_phys;
+ void *vreg[2];
+ u32 reg[2];
+ int is_smc = 0, is_cpm2 = 0;
void *parent, *muram;
+ void *muram_addr;
+ unsigned long muram_offset, muram_size;
if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
is_smc = 1;
@@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp)
else
do_cmd = cpm1_cmd;
- n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4);
- if (n < 4)
+ if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4)
return -1;
- n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt));
- if (n < (int)sizeof(reg_virt)) {
- for (n = 0; n < 2; n++) {
- if (!dt_xlate_reg(devp, n, &reg_phys, NULL))
- return -1;
-
- reg_virt[n] = (void *)reg_phys;
- }
- }
+ if (dt_get_virtual_reg(devp, vreg, 2) < 2)
+ return -1;
if (is_smc)
- smc = reg_virt[0];
+ smc = vreg[0];
else
- scc = reg_virt[0];
+ scc = vreg[0];
- param = reg_virt[1];
+ param = vreg[1];
parent = get_parent(devp);
if (!parent)
return -1;
- n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt));
- if (n < (int)sizeof(reg_virt)) {
- if (!dt_xlate_reg(parent, 0, &reg_phys, NULL))
- return -1;
-
- reg_virt[0] = (void *)reg_phys;
- }
-
- cpcr = reg_virt[0];
+ if (dt_get_virtual_reg(parent, &cpcr, 1) < 1)
+ return -1;
muram = finddevice("/soc/cpm/muram/data");
if (!muram)
return -1;
/* For bootwrapper-compatible device trees, we assume that the first
- * entry has at least 18 bytes, and that #address-cells/#data-cells
+ * entry has at least 128 bytes, and that #address-cells/#data-cells
* is one for both parent and child.
*/
- n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt));
- if (n < (int)sizeof(reg_virt)) {
- if (!dt_xlate_reg(muram, 0, &reg_phys, NULL))
- return -1;
+ if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1)
+ return -1;
- reg_virt[0] = (void *)reg_phys;
- }
+ if (getprop(muram, "reg", reg, 8) < 8)
+ return -1;
- muram_start = reg_virt[0];
+ muram_offset = reg[0];
+ muram_size = reg[1];
- n = getprop(muram, "reg", &muram_offset, 4);
- if (n < 4)
- return -1;
+ /* Store the buffer descriptors at the end of the first muram chunk.
+ * For SMC ports on CPM2-based platforms, relocate the parameter RAM
+ * just before the buffer descriptors.
+ */
+
+ cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd);
+
+ if (is_cpm2 && is_smc) {
+ u16 *smc_base = (u16 *)param;
+ u16 pram_offset;
+
+ pram_offset = cbd_offset - 64;
+ pram_offset = _ALIGN_DOWN(pram_offset, 64);
+
+ disable_port();
+ out_be16(smc_base, pram_offset);
+ param = muram_addr - muram_offset + pram_offset;
+ }
+
+ cbd_addr = muram_addr - muram_offset + cbd_offset;
scdp->open = cpm_serial_open;
scdp->putc = cpm_serial_putc;
diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index f56ac6cae9f..9c7d1342829 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -128,7 +128,7 @@ static void fixup_pci(void)
u8 *soc_regs;
int i, len;
void *node, *parent_node;
- u32 naddr, nsize, mem_log2;
+ u32 naddr, nsize, mem_pow2, mem_mask;
node = finddevice("/pci");
if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
@@ -141,7 +141,7 @@ static void fixup_pci(void)
soc_regs = (u8 *)fsl_get_immr();
if (!soc_regs)
- goto err;
+ goto unhandled;
dt_get_reg_format(node, &naddr, &nsize);
if (naddr != 3 || nsize != 2)
@@ -153,7 +153,7 @@ static void fixup_pci(void)
dt_get_reg_format(parent_node, &naddr, &nsize);
if (naddr != 1 || nsize != 1)
- goto err;
+ goto unhandled;
len = getprop(node, "ranges", pci_ranges_buf,
sizeof(pci_ranges_buf));
@@ -170,14 +170,20 @@ static void fixup_pci(void)
}
if (!mem || !mmio || !io)
- goto err;
+ goto unhandled;
+ if (mem->size[1] != mmio->size[1])
+ goto unhandled;
+ if (mem->size[1] & (mem->size[1] - 1))
+ goto unhandled;
+ if (io->size[1] & (io->size[1] - 1))
+ goto unhandled;
if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
mem_base = mem;
else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
mem_base = mmio;
else
- goto err;
+ goto unhandled;
out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
@@ -201,8 +207,9 @@ static void fixup_pci(void)
out_le32(&pci_regs[0][58], 0);
out_le32(&pci_regs[0][60], 0);
- mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
- out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1));
+ mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
+ mem_mask = ~(mem_pow2 - 1) >> 12;
+ out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask);
/* If PCI is disabled, drive RST high to enable. */
if (!(in_le32(&pci_regs[0][32]) & 1)) {
@@ -228,7 +235,11 @@ static void fixup_pci(void)
return;
err:
- printf("Bad PCI node\r\n");
+ printf("Bad PCI node -- using existing firmware setup.\r\n");
+ return;
+
+unhandled:
+ printf("Unsupported PCI node -- using existing firmware setup.\r\n");
}
static void pq2_platform_fixups(void)
diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c
index cf452b66dce..0a3fddee54d 100644
--- a/arch/powerpc/boot/cuboot-rainier.c
+++ b/arch/powerpc/boot/cuboot-rainier.c
@@ -42,7 +42,8 @@ static void rainier_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
- dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c
index f555575a44d..caf8f2e842e 100644
--- a/arch/powerpc/boot/cuboot-sequoia.c
+++ b/arch/powerpc/boot/cuboot-sequoia.c
@@ -42,7 +42,8 @@ static void sequoia_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
- dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c
index b55b80467ee..9bc906a754d 100644
--- a/arch/powerpc/boot/cuboot-taishan.c
+++ b/arch/powerpc/boot/cuboot-taishan.c
@@ -40,7 +40,8 @@ static void taishan_fixups(void)
ibm4xx_sdram_fixup_memsize();
- dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
}
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index 3db93e85e9e..eb108a87749 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -24,7 +24,7 @@ static void warp_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
- dt_fixup_mac_addresses(&bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
}
diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c
new file mode 100644
index 00000000000..cc6e338c5d0
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-yosemite.c
@@ -0,0 +1,44 @@
+/*
+ * Old U-boot compatibility for Yosemite
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void yosemite_fixups(void)
+{
+ unsigned long sysclk = 66666666;
+
+ ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ ibm4xx_sdram_fixup_memsize();
+ ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = yosemite_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
index 60f561e307a..5d12336dc36 100644
--- a/arch/powerpc/boot/devtree.c
+++ b/arch/powerpc/boot/devtree.c
@@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const char *compat)
return 0;
}
+
+int dt_get_virtual_reg(void *node, void **addr, int nres)
+{
+ unsigned long xaddr;
+ int n;
+
+ n = getprop(node, "virtual-reg", addr, nres * 4);
+ if (n > 0)
+ return n / 4;
+
+ for (n = 0; n < nres; n++) {
+ if (!dt_xlate_reg(node, n, &xaddr, NULL))
+ break;
+
+ addr[n] = (void *)xaddr;
+ }
+
+ return n;
+}
+
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index 7dc37c9a744..ba2521bdaab 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -204,7 +204,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
@@ -225,7 +224,6 @@
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
new file mode 100644
index 00000000000..6f3d38a1554
--- /dev/null
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -0,0 +1,402 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,canyonlands";
+ compatible = "amcc,canyonlands";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460EX";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460ex";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460ex";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460ex", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <2>;
+ num-rx-chans = <10>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 6 4
+ /*RXEOB*/ 7 4
+ /*SERR*/ 3 4
+ /*TXDE*/ 4 4
+ /*RXDE*/ 5 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <b0000000 4 b0000000 50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460ex", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ interrupts = <6 4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1d 4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460ex", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+ reg = <ef601500 8>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <ef601350 30>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <ef601450 30>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 10 4
+ /*Wake*/ 1 &UIC2 14 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 11 4
+ /*Wake*/ 1 &UIC2 15 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0 3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0000 0 0 0>;
+ interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 08010000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 08011000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <80 bf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 0b000cb7ed8..5079dc890e0 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -241,7 +241,6 @@
};
EMAC0: ethernet@40000800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
@@ -261,7 +260,6 @@
zmii-channel = <0>;
};
EMAC1: ethernet@40000900 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts
index 5d2fb76a72c..756758fb5b7 100644
--- a/arch/powerpc/boot/dts/ep8248e.dts
+++ b/arch/powerpc/boot/dts/ep8248e.dts
@@ -121,8 +121,7 @@
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 0x1100 0x1140
- 0xec0 0x9800 0x800>;
+ reg = <0 0x2000 0x9800 0x800>;
};
};
@@ -138,7 +137,7 @@
device_type = "serial";
compatible = "fsl,mpc8248-smc-uart",
"fsl,cpm2-smc-uart";
- reg = <0x11a80 0x20 0x1100 0x40>;
+ reg = <0x11a80 0x20 0x87fc 2>;
interrupts = <4 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <7>;
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
index 02705f29979..ae57d624012 100644
--- a/arch/powerpc/boot/dts/ep88xc.dts
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -2,7 +2,7 @@
* EP88xC Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -10,6 +10,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "EP88xC";
@@ -23,44 +24,44 @@
PowerPC,885@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <d#16>;
- i-cache-line-size = <d#16>;
- d-cache-size = <d#8192>;
- i-cache-size = <d#8192>;
+ reg = <0x0>;
+ d-cache-line-size = <16>;
+ i-cache-line-size = <16>;
+ d-cache-size = <8192>;
+ i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
- interrupts = <f 2>; // decrementer interrupt
+ interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x0 0x0>;
};
localbus@fa200100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <fa200100 40>;
+ reg = <0xfa200100 0x40>;
ranges = <
- 0 0 fc000000 04000000
- 3 0 fa000000 01000000
+ 0x0 0x0 0xfc000000 0x4000000
+ 0x3 0x0 0xfa000000 0x1000000
>;
flash@0,2000000 {
compatible = "cfi-flash";
- reg = <0 2000000 2000000>;
+ reg = <0x0 0x2000000 0x2000000>;
bank-width = <4>;
device-width = <2>;
};
board-control@3,400000 {
- reg = <3 400000 10>;
+ reg = <0x3 0x400000 0x10>;
compatible = "fsl,ep88xc-bcsr";
};
};
@@ -70,25 +71,25 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 fa200000 00004000>;
+ ranges = <0x0 0xfa200000 0x4000>;
bus-frequency = <0>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
- reg = <fa200000 4000>;
+ reg = <0xfa200000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
@@ -97,7 +98,7 @@
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
@@ -109,7 +110,7 @@
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
- reg = <1e00 188>;
+ reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
@@ -120,7 +121,7 @@
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0 24>;
+ reg = <0x0 0x24>;
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
};
@@ -130,29 +131,29 @@
#size-cells = <2>;
compatible = "fsl,pq-pcmcia";
device_type = "pcmcia";
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&PIC>;
- interrupts = <d 1>;
+ interrupts = <13 1>;
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
- command-proc = <9c0>;
+ command-proc = <0x9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
- reg = <9c0 40>;
+ reg = <0x9c0 0x40>;
ranges;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 2000 2000>;
+ ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 1c00>;
+ reg = <0x0 0x1c00>;
};
};
@@ -160,7 +161,7 @@
compatible = "fsl,mpc885-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
- reg = <9f0 10>;
+ reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
@@ -168,7 +169,7 @@
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
- reg = <930 20>;
+ reg = <0x930 0x20>;
compatible = "fsl,mpc885-cpm-pic",
"fsl,cpm1-pic";
};
@@ -178,11 +179,11 @@
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a80 10 3e80 40>;
+ reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <0090>;
+ fsl,cpm-command = <0x90>;
linux,planetcore-label = "SMC1";
};
@@ -191,11 +192,11 @@
device_type = "serial";
compatible = "fsl,mpc885-scc-uart",
"fsl,cpm1-scc-uart";
- reg = <a20 20 3d00 80>;
- interrupts = <1d>;
+ reg = <0xa20 0x20 0x3d00 0x80>;
+ interrupts = <29>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <0040>;
+ fsl,cpm-command = <0x40>;
linux,planetcore-label = "SCC2";
};
@@ -204,9 +205,9 @@
#size-cells = <0>;
compatible = "fsl,mpc885-usb",
"fsl,cpm1-usb";
- reg = <a00 18 1c00 80>;
+ reg = <0xa00 0x18 0x1c00 0x80>;
interrupt-parent = <&CPM_PIC>;
- interrupts = <1e>;
+ interrupts = <30>;
fsl,cpm-command = <0000>;
};
};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
new file mode 100644
index 00000000000..958a5ca53d3
--- /dev/null
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -0,0 +1,467 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,glacier";
+ compatible = "amcc,glacier", "amcc,canyonlands";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <20>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 6 4
+ /*RXEOB*/ 7 4
+ /*SERR*/ 3 4
+ /*TXDE*/ 4 4
+ /*RXDE*/ 5 4>;
+ desc-base-addr-high = <8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <b0000000 4 b0000000 50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ interrupts = <6 4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1d 4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460gt", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <ef601500 8>;
+ has-mdio;
+ };
+
+ RGMII1: emac-rgmii@ef601600 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <ef601600 8>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <ef601350 30>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <ef601450 30>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 10 4
+ /*Wake*/ 1 &UIC2 14 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 11 4
+ /*Wake*/ 1 &UIC2 15 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 12 4
+ /*Wake*/ 1 &UIC2 16 4>;
+ reg = <ef601100 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <10>;
+ cell-index = <2>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC3: ethernet@ef601200 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC3>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 13 4
+ /*Wake*/ 1 &UIC2 17 4>;
+ reg = <ef601200 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <18>;
+ cell-index = <3>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0 3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0000 0 0 0>;
+ interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 08010000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 08011000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <80 bf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index ae68fefc01b..b5d95ac24db 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -12,7 +12,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,haleakala";
- compatible = "amcc,kilauea";
+ compatible = "amcc,haleakala", "amcc,kilauea";
dcr-parent = <&/cpus/cpu@0>;
aliases {
@@ -218,7 +218,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index fc86e5a3afc..cc2873a531d 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -212,7 +212,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "gmii";
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 8baef61f31c..48c9a6e71f1 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -219,7 +219,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -247,7 +247,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
new file mode 100644
index 00000000000..f869ce3ca0b
--- /dev/null
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -0,0 +1,267 @@
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ model = "KSI8560";
+ compatible = "emerson,KSI8560";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8560@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x8000>; /* L1, 32K */
+ i-cache-size = <0x8000>; /* L1, 32K */
+ timebase-frequency = <0>; /* From U-boot */
+ bus-frequency = <0>; /* From U-boot */
+ clock-frequency = <0>; /* From U-boot */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */
+ };
+
+ soc@fdf00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x00000000 0xfdf00000 0x00100000>;
+ bus-frequency = <0>; /* Fixed by bootwrapper */
+
+ memory-controller@2000 {
+ compatible = "fsl,8540-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x12 0x2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8540-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <0x20>; /* 32 bytes */
+ cache-size = <0x40000>; /* L2, 256K */
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x10 0x2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&MPIC>;
+ dfsrr;
+ };
+
+ mdio@24520 { /* For TSECs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY2: ethernet-phy@2 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: ethernet@24000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY1>;
+ };
+
+ enet1: ethernet@25000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY2>;
+ };
+
+ MPIC: pic@40000 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x40000 0x40000>;
+ device_type = "open-pic";
+ };
+
+ cpm@919c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+ reg = <0x919c0 0x30>;
+ ranges;
+
+ muram@80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x0 0x4000 0x9000 0x2000>;
+ };
+ };
+
+ brg@919f0 {
+ compatible = "fsl,mpc8560-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <0x919f0 0x10 0x915f0 0x10>;
+ clock-frequency = <165000000>; /* 166MHz */
+ };
+
+ CPMPIC: pic@90c00 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0x2e 0x2>;
+ interrupt-parent = <&MPIC>;
+ reg = <0x90c00 0x80>;
+ compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+ };
+
+ serial@91a00 {
+ device_type = "serial";
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a00 0x20 0x88000 0x100>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0x800000>;
+ current-speed = <0x1c200>;
+ interrupts = <0x28 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ };
+
+ serial@91a20 {
+ device_type = "serial";
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a20 0x20 0x88100 0x100>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <0x4a00000>;
+ current-speed = <0x1c200>;
+ interrupts = <0x29 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ };
+
+ mdio@90d00 { /* For FCCs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,cpm2-mdio-bitbang";
+ reg = <0x90d00 0x14>;
+ fsl,mdio-pin = <24>;
+ fsl,mdc-pin = <25>;
+
+ PHY0: ethernet-phy@0 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet2: ethernet@91300 {
+ device_type = "network";
+ compatible = "fsl,mpc8560-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ fsl,cpm-command = <0x12000300>;
+ interrupts = <0x20 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ phy-handle = <&PHY0>;
+ };
+ };
+ };
+
+ localbus@fdf05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-localbus";
+ reg = <0xfdf05000 0x68>;
+
+ ranges = <0x0 0x0 0xe0000000 0x00800000
+ 0x4 0x0 0xe8080000 0x00080000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <0x2>;
+
+ partition@0 {
+ label = "Primary Kernel";
+ reg = <0x0 0x180000>;
+ };
+ partition@180000 {
+ label = "Primary Filesystem";
+ reg = <0x180000 0x580000>;
+ };
+ partition@700000 {
+ label = "Monitor";
+ reg = <0x300000 0x100000>;
+ read-only;
+ };
+ };
+
+ cpld@4,0 {
+ compatible = "emerson,KSI8560-cpld";
+ reg = <0x4 0x0 0x80000>;
+ };
+ };
+
+
+ chosen {
+ linux,stdout-path = "/soc/cpm/serial@91a00";
+ };
+};
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 44695885451..2e5a1a1812b 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -7,6 +7,7 @@
* Based on sandpoint.dts
*
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
*/
+/dts-v1/;
+
/ {
model = "KuroboxHD";
compatible = "linkstation";
@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
PowerPC,603e { /* Really 8241 */
device_type = "cpu";
- reg = <0>;
- clock-frequency = <bebc200>; /* Fixed by bootloader */
- timebase-frequency = <1743000>; /* Fixed by bootloader */
+ reg = <0x0>;
+ clock-frequency = <200000000>; /* Fixed by bootloader */
+ timebase-frequency = <24391680>; /* Fixed by bootloader */
bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-size = <0x4000>;
+ d-cache-size = <0x4000>;
};
};
memory {
device_type = "memory";
- reg = <00000000 04000000>;
+ reg = <0x0 0x4000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
- reg = <80000000 00100000>;
- ranges = <80000000 80000000 70000000 /* pci mem space */
- fc000000 fc000000 00100000 /* EUMB */
- fe000000 fe000000 00c00000 /* pci i/o space */
- fec00000 fec00000 00300000 /* pci cfg regs */
- fef00000 fef00000 00100000>; /* pci iack */
+ reg = <0x80000000 0x100000>;
+ ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */
+ 0xfc000000 0xfc000000 0x100000 /* EUMB */
+ 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */
+ 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */
+ 0xfef00000 0xfef00000 0x100000>; /* pci iack */
i2c@80003000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <80003000 1000>;
+ reg = <0x80003000 0x1000>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
rtc@32 {
device_type = "rtc";
compatible = "ricoh,rs5c372a";
- reg = <32>;
+ reg = <0x32>;
};
};
@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <80004500 8>;
- clock-frequency = <5d08d88>;
- current-speed = <2580>;
+ reg = <0x80004500 0x8>;
+ clock-frequency = <97553800>;
+ current-speed = <9600>;
interrupts = <9 0>;
interrupt-parent = <&mpic>;
};
@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <80004600 8>;
- clock-frequency = <5d08d88>;
- current-speed = <e100>;
- interrupts = <a 0>;
+ reg = <0x80004600 0x8>;
+ clock-frequency = <97553800>;
+ current-speed = <57600>;
+ interrupts = <10 0>;
interrupt-parent = <&mpic>;
};
@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
- reg = <80040000 40000>;
+ reg = <0x80040000 0x40000>;
};
pci0: pci@fec00000 {
@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
- reg = <fec00000 400000>;
- ranges = <01000000 0 0 fe000000 0 00c00000
- 02000000 0 80000000 80000000 0 70000000>;
- bus-range = <0 ff>;
- clock-frequency = <7f28155>;
+ reg = <0xfec00000 0x400000>;
+ ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000
+ 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+ bus-range = <0 255>;
+ clock-frequency = <133333333>;
interrupt-parent = <&mpic>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
- 5800 0 0 1 &mpic 0 1
- 5800 0 0 2 &mpic 1 1
- 5800 0 0 3 &mpic 2 1
- 5800 0 0 4 &mpic 3 1
+ 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 12 - IRQ1 IDE0 */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 0 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 14 - IRQ3 USB2.0 */
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 3 1
- 7000 0 0 3 &mpic 3 1
- 7000 0 0 4 &mpic 3 1
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
};
};
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index 8443c85b7b3..e4916e69ad3 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -7,6 +7,7 @@
* Based on sandpoint.dts
*
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
*/
+/dts-v1/;
+
/ {
model = "KuroboxHG";
compatible = "linkstation";
@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
PowerPC,603e { /* Really 8241 */
device_type = "cpu";
- reg = <0>;
- clock-frequency = <fdad680>; /* Fixed by bootloader */
- timebase-frequency = <1F04000>; /* Fixed by bootloader */
+ reg = <0x0>;
+ clock-frequency = <266000000>; /* Fixed by bootloader */
+ timebase-frequency = <32522240>; /* Fixed by bootloader */
bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-size = <0x4000>;
+ d-cache-size = <0x4000>;
};
};
memory {
device_type = "memory";
- reg = <00000000 08000000>;
+ reg = <0x0 0x8000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
- reg = <80000000 00100000>;
- ranges = <80000000 80000000 70000000 /* pci mem space */
- fc000000 fc000000 00100000 /* EUMB */
- fe000000 fe000000 00c00000 /* pci i/o space */
- fec00000 fec00000 00300000 /* pci cfg regs */
- fef00000 fef00000 00100000>; /* pci iack */
+ reg = <0x80000000 0x100000>;
+ ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */
+ 0xfc000000 0xfc000000 0x100000 /* EUMB */
+ 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */
+ 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */
+ 0xfef00000 0xfef00000 0x100000>; /* pci iack */
i2c@80003000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <80003000 1000>;
+ reg = <0x80003000 0x1000>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
rtc@32 {
device_type = "rtc";
compatible = "ricoh,rs5c372a";
- reg = <32>;
+ reg = <0x32>;
};
};
@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <80004500 8>;
- clock-frequency = <7c044a8>;
- current-speed = <2580>;
+ reg = <0x80004500 0x8>;
+ clock-frequency = <130041000>;
+ current-speed = <9600>;
interrupts = <9 0>;
interrupt-parent = <&mpic>;
};
@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <80004600 8>;
- clock-frequency = <7c044a8>;
- current-speed = <e100>;
- interrupts = <a 0>;
+ reg = <0x80004600 0x8>;
+ clock-frequency = <130041000>;
+ current-speed = <57600>;
+ interrupts = <10 0>;
interrupt-parent = <&mpic>;
};
@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
- reg = <80040000 40000>;
+ reg = <0x80040000 0x40000>;
};
pci0: pci@fec00000 {
@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
- reg = <fec00000 400000>;
- ranges = <01000000 0 0 fe000000 0 00c00000
- 02000000 0 80000000 80000000 0 70000000>;
- bus-range = <0 ff>;
- clock-frequency = <7f28155>;
+ reg = <0xfec00000 0x400000>;
+ ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000
+ 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+ bus-range = <0 255>;
+ clock-frequency = <133333333>;
interrupt-parent = <&mpic>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
- 5800 0 0 1 &mpic 0 1
- 5800 0 0 2 &mpic 1 1
- 5800 0 0 3 &mpic 2 1
- 5800 0 0 4 &mpic 3 1
+ 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 12 - IRQ1 IDE0 */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 0 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 14 - IRQ3 USB2.0 */
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 3 1
- 7000 0 0 3 &mpic 3 1
- 7000 0 0 4 &mpic 3 1
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
};
};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 710c0116817..84cc5e72ddd 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -219,7 +219,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -247,7 +247,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 8fb54238743..4936349b87c 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -1,7 +1,7 @@
/*
* MPC7448HPC2 (Taiga) board Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
* 2006 Roy Zang <Roy Zang at freescale.com>.
*
* This program is free software; you can redistribute it and/or modify it
@@ -10,6 +10,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "mpc7448hpc2";
@@ -23,11 +24,11 @@
PowerPC,7448@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K bytes
- i-cache-size = <8000>; // L1, 32K bytes
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K bytes
+ i-cache-size = <0x8000>; // L1, 32K bytes
timebase-frequency = <0>; // 33 MHz, from uboot
clock-frequency = <0>; // From U-Boot
bus-frequency = <0>; // From U-Boot
@@ -36,7 +37,7 @@
memory {
device_type = "memory";
- reg = <00000000 20000000 // DDR2 512M at 0
+ reg = <0x0 0x20000000 // DDR2 512M at 0
>;
};
@@ -44,14 +45,14 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "tsi-bridge";
- ranges = <00000000 c0000000 00010000>;
- reg = <c0000000 00010000>;
+ ranges = <0x0 0xc0000000 0x10000>;
+ reg = <0xc0000000 0x10000>;
bus-frequency = <0>;
i2c@7000 {
interrupt-parent = <&mpic>;
- interrupts = <E 0>;
- reg = <7000 400>;
+ interrupts = <14 0>;
+ reg = <0x7000 0x400>;
device_type = "i2c";
compatible = "tsi108-i2c";
};
@@ -59,20 +60,20 @@
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi108-mdio";
- reg = <6000 50>;
+ reg = <0x6000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
phy8: ethernet-phy@8 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <8>;
+ reg = <0x8>;
};
phy9: ethernet-phy@9 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <9>;
+ reg = <0x9>;
};
};
@@ -82,9 +83,9 @@
#size-cells = <0>;
device_type = "network";
compatible = "tsi108-ethernet";
- reg = <6000 200>;
+ reg = <0x6000 0x200>;
address = [ 00 06 D2 00 00 01 ];
- interrupts = <10 2>;
+ interrupts = <16 2>;
interrupt-parent = <&mpic>;
mdio-handle = <&MDIO>;
phy-handle = <&phy8>;
@@ -96,9 +97,9 @@
#size-cells = <0>;
device_type = "network";
compatible = "tsi108-ethernet";
- reg = <6400 200>;
+ reg = <0x6400 0x200>;
address = [ 00 06 D2 00 00 02 ];
- interrupts = <11 2>;
+ interrupts = <17 2>;
interrupt-parent = <&mpic>;
mdio-handle = <&MDIO>;
phy-handle = <&phy9>;
@@ -107,18 +108,18 @@
serial@7808 {
device_type = "serial";
compatible = "ns16550";
- reg = <7808 200>;
- clock-frequency = <3f6b5a00>;
- interrupts = <c 0>;
+ reg = <0x7808 0x200>;
+ clock-frequency = <1064000000>;
+ interrupts = <12 0>;
interrupt-parent = <&mpic>;
};
serial@7c08 {
device_type = "serial";
compatible = "ns16550";
- reg = <7c08 200>;
- clock-frequency = <3f6b5a00>;
- interrupts = <d 0>;
+ reg = <0x7c08 0x200>;
+ clock-frequency = <1064000000>;
+ interrupts = <13 0>;
interrupt-parent = <&mpic>;
};
@@ -127,7 +128,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <7400 400>;
+ reg = <0x7400 0x400>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -138,39 +139,39 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <1000 1000>;
+ reg = <0x1000 0x1000>;
bus-range = <0 0>;
- ranges = <02000000 0 e0000000 e0000000 0 1A000000
- 01000000 0 00000000 fa000000 0 00010000>;
- clock-frequency = <7f28154>;
+ ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000
+ 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
+ clock-frequency = <133333332>;
interrupt-parent = <&mpic>;
- interrupts = <17 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <23 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
- 0800 0 0 1 &RT0 24 0
- 0800 0 0 2 &RT0 25 0
- 0800 0 0 3 &RT0 26 0
- 0800 0 0 4 &RT0 27 0
+ 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+ 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+ 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+ 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
/* IDSEL 0x12 */
- 1000 0 0 1 &RT0 25 0
- 1000 0 0 2 &RT0 26 0
- 1000 0 0 3 &RT0 27 0
- 1000 0 0 4 &RT0 24 0
+ 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+ 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+ 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+ 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
/* IDSEL 0x13 */
- 1800 0 0 1 &RT0 26 0
- 1800 0 0 2 &RT0 27 0
- 1800 0 0 3 &RT0 24 0
- 1800 0 0 4 &RT0 25 0
+ 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+ 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+ 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+ 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
/* IDSEL 0x14 */
- 2000 0 0 1 &RT0 27 0
- 2000 0 0 2 &RT0 24 0
- 2000 0 0 3 &RT0 25 0
- 2000 0 0 4 &RT0 26 0
+ 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+ 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+ 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+ 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
@@ -180,7 +181,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
big-endian;
- interrupts = <17 2>;
+ interrupts = <23 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 7285ca1325f..46e2da30c3d 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -1,7 +1,7 @@
/*
* MPC8272 ADS Device Tree Source
*
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,8 @@
* option) any later version.
*/
+/dts-v1/;
+
/ {
model = "MPC8272ADS";
compatible = "fsl,mpc8272ads";
@@ -21,11 +23,11 @@
PowerPC,8272@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <d#32>;
- i-cache-line-size = <d#32>;
- d-cache-size = <d#16384>;
- i-cache-size = <d#16384>;
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
@@ -34,7 +36,7 @@
memory {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x0 0x0>;
};
localbus@f0010100 {
@@ -42,21 +44,21 @@
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <f0010100 40>;
+ reg = <0xf0010100 0x40>;
- ranges = <0 0 fe000000 02000000
- 1 0 f4500000 00008000
- 3 0 f8200000 00008000>;
+ ranges = <0x0 0x0 0xfe000000 0x2000000
+ 0x1 0x0 0xf4500000 0x8000
+ 0x3 0x0 0xf8200000 0x8000>;
flash@0,0 {
compatible = "jedec-flash";
- reg = <0 0 2000000>;
+ reg = <0x0 0x0 0x2000000>;
bank-width = <4>;
device-width = <1>;
};
board-control@1,0 {
- reg = <1 0 20>;
+ reg = <0x1 0x0 0x20>;
compatible = "fsl,mpc8272ads-bcsr";
};
@@ -65,46 +67,46 @@
"fsl,pq2ads-pci-pic";
#interrupt-cells = <1>;
interrupt-controller;
- reg = <3 0 8>;
+ reg = <0x3 0x0 0x8>;
interrupt-parent = <&PIC>;
- interrupts = <14 8>;
+ interrupts = <20 8>;
};
};
pci@f0010800 {
device_type = "pci";
- reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+ reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- clock-frequency = <d#66666666>;
- interrupt-map-mask = <f800 0 0 7>;
+ clock-frequency = <66666666>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x16 */
- b000 0 0 1 &PCI_PIC 0
- b000 0 0 2 &PCI_PIC 1
- b000 0 0 3 &PCI_PIC 2
- b000 0 0 4 &PCI_PIC 3
+ 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+ 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+ 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+ 0xb000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 0x17 */
- b800 0 0 1 &PCI_PIC 4
- b800 0 0 2 &PCI_PIC 5
- b800 0 0 3 &PCI_PIC 6
- b800 0 0 4 &PCI_PIC 7
+ 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+ 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+ 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+ 0xb800 0x0 0x0 0x4 &PCI_PIC 7
/* IDSEL 0x18 */
- c000 0 0 1 &PCI_PIC 8
- c000 0 0 2 &PCI_PIC 9
- c000 0 0 3 &PCI_PIC a
- c000 0 0 4 &PCI_PIC b>;
+ 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+ 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+ 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+ 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
interrupt-parent = <&PIC>;
- interrupts = <12 8>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 f6000000 0 02000000>;
+ interrupts = <18 8>;
+ ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
};
soc@f0000000 {
@@ -112,26 +114,26 @@
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8272", "fsl,pq2-soc";
- ranges = <00000000 f0000000 00053000>;
+ ranges = <0x0 0xf0000000 0x53000>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
- reg = <f0000000 00053000>;
+ reg = <0xf0000000 0x53000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
- reg = <119c0 30>;
+ reg = <0x119c0 0x30>;
ranges;
muram@0 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 10000>;
+ ranges = <0x0 0x0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9800 800>;
+ reg = <0x0 0x2000 0x9800 0x800>;
};
};
@@ -139,29 +141,29 @@
compatible = "fsl,mpc8272-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <119f0 10 115f0 10>;
+ reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8272-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <11a00 20 8000 100>;
- interrupts = <28 8>;
+ reg = <0x11a00 0x20 0x8000 0x100>;
+ interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <00800000>;
+ fsl,cpm-command = <0x800000>;
};
serial@11a60 {
device_type = "serial";
compatible = "fsl,mpc8272-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <11a60 20 8300 100>;
- interrupts = <2b 8>;
+ reg = <0x11a60 0x20 0x8300 0x100>;
+ interrupts = <43 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <4>;
- fsl,cpm-command = <0ce00000>;
+ fsl,cpm-command = <0xce00000>;
};
mdio@10d40 {
@@ -169,23 +171,23 @@
compatible = "fsl,mpc8272ads-mdio-bitbang",
"fsl,mpc8272-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
- reg = <10d40 14>;
+ reg = <0x10d40 0x14>;
#address-cells = <1>;
#size-cells = <0>;
- fsl,mdio-pin = <12>;
- fsl,mdc-pin = <13>;
+ fsl,mdio-pin = <18>;
+ fsl,mdc-pin = <19>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
- interrupts = <17 8>;
- reg = <0>;
+ interrupts = <23 8>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
- interrupts = <17 8>;
- reg = <3>;
+ interrupts = <23 8>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -194,33 +196,33 @@
device_type = "network";
compatible = "fsl,mpc8272-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <11300 20 8400 100 11390 1>;
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <20 8>;
+ interrupts = <32 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
- fsl,cpm-command = <12000300>;
+ fsl,cpm-command = <0x12000300>;
};
ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8272-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <11320 20 8500 100 113b0 1>;
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <21 8>;
+ interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
- fsl,cpm-command = <16200300>;
+ fsl,cpm-command = <0x16200300>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
- reg = <10c00 80>;
+ reg = <0x10c00 0x80>;
compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
};
@@ -232,14 +234,14 @@
"fsl,talitos-sec2",
"fsl,talitos",
"talitos";
- reg = <30000 10000>;
- interrupts = <b 8>;
+ reg = <0x30000 0x10000>;
+ interrupts = <11 8>;
interrupt-parent = <&PIC>;
num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <0000007e>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x7e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
- descriptor-types-mask = <01010ebf>;
+ descriptor-types-mask = <0x1010ebf>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 9bb408371bc..539e02fb352 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -255,9 +255,7 @@
enet0: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <3>;
- device-id = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
@@ -271,9 +269,7 @@
enet1: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <4>;
- device-id = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
@@ -287,8 +283,7 @@
ucc@2400 {
device_type = "serial";
compatible = "ucc_uart";
- model = "UCC";
- device-id = <5>; /* The UCC number, 1-7*/
+ cell-index = <5>; /* The UCC number, 1-7*/
port-number = <0>; /* Which ttyQEx device */
soft-uart; /* We need Soft-UART */
reg = <0x2400 0x200>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 94f93d209de..179c81c6a7a 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -208,9 +208,7 @@
enet0: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <2>;
- device-id = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
@@ -224,9 +222,7 @@
enet1: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <3>;
- device-id = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 55f03e8dc97..8160ff24e87 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -257,9 +257,7 @@
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <1>;
- device-id = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
@@ -274,9 +272,7 @@
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <2>;
- device-id = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 975248491b7..18033ed0b53 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -1,7 +1,7 @@
/*
* MPC8540 ADS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8540ADS";
@@ -31,11 +32,11 @@
PowerPC,8540@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
@@ -44,31 +45,31 @@
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8540@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00100000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x100000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -76,8 +77,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -86,24 +87,24 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -113,9 +114,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -125,9 +126,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -137,9 +138,9 @@
device_type = "network";
model = "FEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2>;
+ interrupts = <41 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
@@ -148,9 +149,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -158,9 +159,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
@@ -168,7 +169,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -177,90 +178,90 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x02 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
+ 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x03 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
+ 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x04 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x05 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x0c */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x0d */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
+ 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x0e */
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x0f */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
+ 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x13 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x14 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x15 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index fa8d9aaad15..663c7c50ca4 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -1,7 +1,7 @@
/*
* MPC8541 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8541CDS";
@@ -31,11 +32,11 @@
PowerPC,8541@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
@@ -44,31 +45,31 @@
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8541@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8541-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8541-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -76,8 +77,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -86,18 +87,18 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
@@ -107,9 +108,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -119,9 +120,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -130,9 +131,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -140,9 +141,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -151,7 +152,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -161,17 +162,17 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9000 1000>;
+ reg = <0x0 0x2000 0x9000 0x1000>;
};
};
@@ -179,16 +180,16 @@
compatible = "fsl,mpc8541-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
};
};
@@ -196,68 +197,68 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
+ 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
+ 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
+ reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
@@ -268,24 +269,24 @@
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 688af9d0638..6a0d8db96d9 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -1,7 +1,7 @@
/*
* MPC8544 DS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
@@ -27,17 +28,16 @@
};
cpus {
- #cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8544@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
@@ -46,7 +46,7 @@
memory {
device_type = "memory";
- reg = <00000000 00000000>; // Filled by U-Boot
+ reg = <0x0 0x0>; // Filled by U-Boot
};
soc8544@e0000000 {
@@ -54,24 +54,24 @@
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
memory-controller@2000 {
compatible = "fsl,8544-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8544-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -79,8 +79,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -90,8 +90,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -100,30 +100,71 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <0>;
+ interrupts = <10 1>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <1>;
+ interrupts = <10 1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8544-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8544-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8544-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8544-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -134,9 +175,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -146,9 +187,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -156,15 +197,15 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -173,7 +214,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -184,32 +225,32 @@
cell-index = <0>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 J16 Slot 2 */
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 2 1
- 9000 0 0 4 &mpic 1 1>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 c0000000 c0000000 0 20000000
- 01000000 0 00000000 e1000000 0 00010000>;
- clock-frequency = <3f940aa>;
+ interrupts = <24 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
};
pci1: pcie@e0009000 {
@@ -219,33 +260,33 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e1010000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xe0009000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00010000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
};
};
@@ -256,33 +297,33 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e1020000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xe000a000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00010000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
};
};
@@ -293,72 +334,72 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000b000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 b0000000 b0000000 0 00100000
- 01000000 0 00000000 b0100000 0 00100000>;
- clock-frequency = <1fca055>;
+ reg = <0xe000b000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1b 2>;
- interrupt-map-mask = <ff00 0 0 1>;
+ interrupts = <27 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
interrupt-map = <
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 c 2
- e100 0 0 2 &i8259 9 2
- e200 0 0 3 &i8259 a 2
- e300 0 0 4 &i8259 b 2
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 6 2
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 7 2
- f100 0 0 1 &i8259 7 2
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 e 2
- f900 0 0 1 &i8259 5 2
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 b0000000
- 02000000 0 b0000000
- 0 00100000
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
uli1575@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 b0000000
- 02000000 0 b0000000
- 0 00100000
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0
- 01000000 0 0
- 00001000>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0
+ 0x1000000 0x0 0x0
+ 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
@@ -371,28 +412,28 @@
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
interrupt-parent = <&i8259>;
keyboard@0 {
- reg = <0>;
+ reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
- reg = <1>;
+ reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
gpio@400 {
- reg = <1 400 80>;
+ reg = <0x1 0x400 0x80>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 1f470c6a1c6..fa298a8c81c 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -1,7 +1,7 @@
/*
* MPC8548 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8548CDS";
@@ -36,11 +37,11 @@
PowerPC,8548@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
@@ -49,31 +50,31 @@
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8548-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -81,8 +82,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -92,8 +93,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -102,30 +103,30 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -135,9 +136,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -147,9 +148,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -160,9 +161,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
@@ -172,9 +173,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
@@ -184,9 +185,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -194,15 +195,15 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities reg
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -211,7 +212,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -220,139 +221,139 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 02000 0 0 1 &mpic 0 1
- 02000 0 0 2 &mpic 1 1
- 02000 0 0 3 &mpic 2 1
- 02000 0 0 4 &mpic 3 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x5 (PCIX Slot 3) */
- 02800 0 0 1 &mpic 1 1
- 02800 0 0 2 &mpic 2 1
- 02800 0 0 3 &mpic 3 1
- 02800 0 0 4 &mpic 0 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x6 (PCIX Slot 4) */
- 03000 0 0 1 &mpic 2 1
- 03000 0 0 2 &mpic 3 1
- 03000 0 0 3 &mpic 0 1
- 03000 0 0 4 &mpic 1 1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x8 (PCIX Slot 5) */
- 04000 0 0 1 &mpic 0 1
- 04000 0 0 2 &mpic 1 1
- 04000 0 0 3 &mpic 2 1
- 04000 0 0 4 &mpic 3 1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0xC (Tsi310 bridge) */
- 06000 0 0 1 &mpic 0 1
- 06000 0 0 2 &mpic 1 1
- 06000 0 0 3 &mpic 2 1
- 06000 0 0 4 &mpic 3 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x14 (Slot 2) */
- 0a000 0 0 1 &mpic 0 1
- 0a000 0 0 2 &mpic 1 1
- 0a000 0 0 3 &mpic 2 1
- 0a000 0 0 4 &mpic 3 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x15 (Slot 3) */
- 0a800 0 0 1 &mpic 1 1
- 0a800 0 0 2 &mpic 2 1
- 0a800 0 0 3 &mpic 3 1
- 0a800 0 0 4 &mpic 0 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x16 (Slot 4) */
- 0b000 0 0 1 &mpic 2 1
- 0b000 0 0 2 &mpic 3 1
- 0b000 0 0 3 &mpic 0 1
- 0b000 0 0 4 &mpic 1 1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x18 (Slot 5) */
- 0c000 0 0 1 &mpic 0 1
- 0c000 0 0 2 &mpic 1 1
- 0c000 0 0 3 &mpic 2 1
- 0c000 0 0 4 &mpic 3 1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0E000 0 0 1 &mpic 0 1
- 0E000 0 0 2 &mpic 1 1
- 0E000 0 0 3 &mpic 2 1
- 0E000 0 0 4 &mpic 3 1>;
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
pci_bridge@1c {
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x04 (VIA chip) */
- 2000 0 0 1 &mpic 0 1
- 2000 0 0 2 &mpic 1 1
- 2000 0 0 3 &mpic 2 1
- 2000 0 0 4 &mpic 3 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x05 (8139) */
- 2800 0 0 1 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
/* IDSEL 0x06 (Slot 6) */
- 3000 0 0 1 &mpic 2 1
- 3000 0 0 2 &mpic 3 1
- 3000 0 0 3 &mpic 0 1
- 3000 0 0 4 &mpic 1 1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDESL 0x07 (Slot 7) */
- 3800 0 0 1 &mpic 3 1
- 3800 0 0 2 &mpic 0 1
- 3800 0 0 3 &mpic 1 1
- 3800 0 0 4 &mpic 2 1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
- reg = <e000 0 0 0 0>;
+ reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00080000>;
- clock-frequency = <1fca055>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x80000>;
+ clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <2000 0 0 0 0>;
- ranges = <1 0 01000000 0 0 00001000>;
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
@@ -362,7 +363,7 @@
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
};
};
@@ -370,64 +371,64 @@
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic 1 1
- a800 0 0 3 &mpic 2 1
- a800 0 0 4 &mpic 3 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
pci2: pcie@e000a000 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 08000000>;
- clock-frequency = <1fca055>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 08000000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x8000000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 4538f3c3886..b025c566c10 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -1,7 +1,7 @@
/*
* MPC8555 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8555CDS";
@@ -31,11 +32,11 @@
PowerPC,8555@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
@@ -44,31 +45,31 @@
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8555@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8555-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8555-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -76,8 +77,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -86,18 +87,18 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
@@ -107,9 +108,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -119,9 +120,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -130,9 +131,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -140,9 +141,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -151,7 +152,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -161,17 +162,17 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9000 1000>;
+ reg = <0x0 0x2000 0x9000 0x1000>;
};
};
@@ -179,16 +180,16 @@
compatible = "fsl,mpc8555-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
};
};
@@ -196,68 +197,68 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
+ 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
+ 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
+ reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
@@ -268,24 +269,24 @@
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 639ce8a709a..0cc16ab305d 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -1,7 +1,7 @@
/*
* MPC8560 ADS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8560ADS";
@@ -32,74 +33,74 @@
PowerPC,8560@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <04ead9a0>;
- bus-frequency = <13ab6680>;
- clock-frequency = <312c8040>;
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <82500000>;
+ bus-frequency = <330000000>;
+ clock-frequency = <825000000>;
};
};
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x0 0x10000000>;
};
soc8560@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00000200>;
- bus-frequency = <13ab6680>;
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x200>;
+ bus-frequency = <330000000>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -109,9 +110,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -121,9 +122,9 @@
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -132,7 +133,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
device_type = "open-pic";
};
@@ -140,17 +141,17 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 4000 9000 2000>;
+ reg = <0x0 0x4000 0x9000 0x2000>;
};
};
@@ -158,17 +159,17 @@
compatible = "fsl,mpc8560-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
- clock-frequency = <d#165000000>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
+ clock-frequency = <165000000>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
};
@@ -176,11 +177,11 @@
device_type = "serial";
compatible = "fsl,mpc8560-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <91a00 20 88000 100>;
+ reg = <0x91a00 0x20 0x88000 0x100>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <00800000>;
- current-speed = <1c200>;
- interrupts = <28 8>;
+ fsl,cpm-command = <0x800000>;
+ current-speed = <115200>;
+ interrupts = <40 8>;
interrupt-parent = <&cpmpic>;
};
@@ -188,11 +189,11 @@
device_type = "serial";
compatible = "fsl,mpc8560-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <91a20 20 88100 100>;
+ reg = <0x91a20 0x20 0x88100 0x100>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <04a00000>;
- current-speed = <1c200>;
- interrupts = <29 8>;
+ fsl,cpm-command = <0x4a00000>;
+ current-speed = <115200>;
+ interrupts = <41 8>;
interrupt-parent = <&cpmpic>;
};
@@ -200,10 +201,10 @@
device_type = "network";
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <91320 20 88500 100 913b0 1>;
+ reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <16200300>;
- interrupts = <21 8>;
+ fsl,cpm-command = <0x16200300>;
+ interrupts = <33 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
@@ -212,10 +213,10 @@
device_type = "network";
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <91340 20 88600 100 913d0 1>;
+ reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <1a400300>;
- interrupts = <22 8>;
+ fsl,cpm-command = <0x1a400300>;
+ interrupts = <34 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
@@ -229,87 +230,87 @@
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
- reg = <e0008000 1000>;
- clock-frequency = <3f940aa>;
- interrupt-map-mask = <f800 0 0 7>;
+ reg = <0xe0008000 0x1000>;
+ clock-frequency = <66666666>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x2 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
+ 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x3 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
+ 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x4 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x5 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 12 */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 13 */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
+ 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 14*/
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 15 */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
+ 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 18 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 19 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 20 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 21 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 01000000>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 97bc048f215..a025a8ededc 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -1,7 +1,7 @@
/*
* MPC8568E MDS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,10 +9,7 @@
* option) any later version.
*/
-
-/*
-/memreserve/ 00000000 1000000;
-*/
+/dts-v1/;
/ {
model = "MPC8568EMDS";
@@ -37,11 +34,11 @@
PowerPC,8568@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
@@ -50,36 +47,36 @@
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x0 0x10000000>;
};
bcsr@f8000000 {
device_type = "board-control";
- reg = <f8000000 8000>;
+ reg = <0xf8000000 0x8000>;
};
soc8568@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>;
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8568-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -87,14 +84,14 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
- reg = <68>;
+ reg = <0x68>;
};
};
@@ -103,8 +100,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -113,30 +110,30 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <7>;
+ reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -146,9 +143,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
@@ -158,9 +155,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
@@ -169,15 +166,15 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -185,9 +182,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -195,13 +192,13 @@
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
- reg = <30000 f000>;
- interrupts = <2d 2>;
+ reg = <0x30000 0xf000>;
+ interrupts = <45 2>;
interrupt-parent = <&mpic>;
num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <000000fe>;
- descriptor-types-mask = <012b0ebf>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0xfe>;
+ descriptor-types-mask = <0x12b0ebf>;
};
mpic: pic@40000 {
@@ -209,73 +206,73 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
par_io@e0100 {
- reg = <e0100 100>;
+ reg = <0xe0100 0x100>;
device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
- 4 0a 1 0 2 0 /* TxD0 */
- 4 09 1 0 2 0 /* TxD1 */
- 4 08 1 0 2 0 /* TxD2 */
- 4 07 1 0 2 0 /* TxD3 */
- 4 17 1 0 2 0 /* TxD4 */
- 4 16 1 0 2 0 /* TxD5 */
- 4 15 1 0 2 0 /* TxD6 */
- 4 14 1 0 2 0 /* TxD7 */
- 4 0f 2 0 2 0 /* RxD0 */
- 4 0e 2 0 2 0 /* RxD1 */
- 4 0d 2 0 2 0 /* RxD2 */
- 4 0c 2 0 2 0 /* RxD3 */
- 4 1d 2 0 2 0 /* RxD4 */
- 4 1c 2 0 2 0 /* RxD5 */
- 4 1b 2 0 2 0 /* RxD6 */
- 4 1a 2 0 2 0 /* RxD7 */
- 4 0b 1 0 2 0 /* TX_EN */
- 4 18 1 0 2 0 /* TX_ER */
- 4 10 2 0 2 0 /* RX_DV */
- 4 1e 2 0 2 0 /* RX_ER */
- 4 11 2 0 2 0 /* RX_CLK */
- 4 13 1 0 2 0 /* GTX_CLK */
- 1 1f 2 0 3 0>; /* GTX125 */
+ 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
+ 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
+ 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
+ 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
+ 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
+ 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
+ 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
+ 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
+ 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
+ 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
+ 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
+ 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
+ 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
+ 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
+ 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
+ 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
+ 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
+ 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
+ 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
+ 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
+ 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
+ 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
+ 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
- 5 0a 1 0 2 0 /* TxD0 */
- 5 09 1 0 2 0 /* TxD1 */
- 5 08 1 0 2 0 /* TxD2 */
- 5 07 1 0 2 0 /* TxD3 */
- 5 17 1 0 2 0 /* TxD4 */
- 5 16 1 0 2 0 /* TxD5 */
- 5 15 1 0 2 0 /* TxD6 */
- 5 14 1 0 2 0 /* TxD7 */
- 5 0f 2 0 2 0 /* RxD0 */
- 5 0e 2 0 2 0 /* RxD1 */
- 5 0d 2 0 2 0 /* RxD2 */
- 5 0c 2 0 2 0 /* RxD3 */
- 5 1d 2 0 2 0 /* RxD4 */
- 5 1c 2 0 2 0 /* RxD5 */
- 5 1b 2 0 2 0 /* RxD6 */
- 5 1a 2 0 2 0 /* RxD7 */
- 5 0b 1 0 2 0 /* TX_EN */
- 5 18 1 0 2 0 /* TX_ER */
- 5 10 2 0 2 0 /* RX_DV */
- 5 1e 2 0 2 0 /* RX_ER */
- 5 11 2 0 2 0 /* RX_CLK */
- 5 13 1 0 2 0 /* GTX_CLK */
- 1 1f 2 0 3 0 /* GTX125 */
- 4 06 3 0 2 0 /* MDIO */
- 4 05 1 0 2 0>; /* MDC */
+ 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
+ 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
+ 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
+ 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
+ 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
+ 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
+ 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
+ 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
+ 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
+ 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
+ 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
+ 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
+ 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
+ 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
+ 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
+ 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
+ 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
+ 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
+ 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
+ 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
+ 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
+ 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
+ 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
+ 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
+ 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
};
};
};
@@ -285,28 +282,28 @@
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
- ranges = <0 e0080000 00040000>;
- reg = <e0080000 480>;
+ ranges = <0x0 0xe0080000 0x40000>;
+ reg = <0xe0080000 0x480>;
brg-frequency = <0>;
- bus-frequency = <179A7B00>;
+ bus-frequency = <396000000>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0 00010000 0000c000>;
+ ranges = <0x0 0x10000 0x10000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
- reg = <0 c000>;
+ reg = <0x0 0x10000>;
};
};
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
- reg = <4c0 40>;
+ reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu";
@@ -315,7 +312,7 @@
spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
- reg = <500 40>;
+ reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
@@ -324,11 +321,9 @@
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <1>;
- device-id = <1>;
- reg = <2000 200>;
- interrupts = <20>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
@@ -341,11 +336,9 @@
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <2>;
- device-id = <2>;
- reg = <3000 200>;
- interrupts = <21>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
@@ -358,7 +351,7 @@
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <2120 18>;
+ reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
/* These are the same PHYs as on
@@ -366,25 +359,25 @@
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <7>;
+ reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -394,9 +387,9 @@
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
big-endian;
- interrupts = <2e 2 2e 2>; //high:30 low:30
+ interrupts = <46 2 46 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
@@ -404,30 +397,30 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 &mpic 5 1
- 9000 0 0 2 &mpic 6 1
- 9000 0 0 3 &mpic 7 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 &mpic 6 1
- 9800 0 0 2 &mpic 7 1
- 9800 0 0 3 &mpic 4 1
- 9800 0 0 4 &mpic 5 1>;
+ 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ interrupts = <24 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
@@ -435,39 +428,39 @@
/* PCI Express */
pci1: pcie@e000a000 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <1fca055>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00800000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x800000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index db37214aee3..66f27ab613a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -1,7 +1,7 @@
/*
* MPC8572 DS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
@@ -33,11 +34,11 @@
PowerPC,8572@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
@@ -45,11 +46,11 @@
PowerPC,8572@1 {
device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
@@ -58,38 +59,38 @@
memory {
device_type = "memory";
- reg = <00000000 00000000>; // Filled by U-Boot
+ reg = <0x0 0x0>; // Filled by U-Boot
};
soc8572@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 ffe00000 00100000>;
- reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
+ ranges = <0x0 0xffe00000 0x100000>;
+ reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
- reg = <6000 1000>;
+ reg = <0x6000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -97,8 +98,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -108,8 +109,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -118,27 +119,27 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <0>;
+ interrupts = <10 1>;
+ reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <1>;
+ interrupts = <10 1>;
+ reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <2>;
+ interrupts = <10 1>;
+ reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <3>;
+ interrupts = <10 1>;
+ reg = <0x3>;
};
};
@@ -147,9 +148,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -160,9 +161,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -173,9 +174,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -186,9 +187,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -198,9 +199,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -208,15 +209,15 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -225,7 +226,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -239,167 +240,167 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <ffe08000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 ffc00000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xffe08000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <ff00 0 0 7>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 1 - PCI slot 1 */
- 8900 0 0 1 &mpic 2 1
- 8900 0 0 2 &mpic 3 1
- 8900 0 0 3 &mpic 4 1
- 8900 0 0 4 &mpic 1 1
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 2 - PCI slot 1 */
- 8a00 0 0 1 &mpic 2 1
- 8a00 0 0 2 &mpic 3 1
- 8a00 0 0 3 &mpic 4 1
- 8a00 0 0 4 &mpic 1 1
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 3 - PCI slot 1 */
- 8b00 0 0 1 &mpic 2 1
- 8b00 0 0 2 &mpic 3 1
- 8b00 0 0 3 &mpic 4 1
- 8b00 0 0 4 &mpic 1 1
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 4 - PCI slot 1 */
- 8c00 0 0 1 &mpic 2 1
- 8c00 0 0 2 &mpic 3 1
- 8c00 0 0 3 &mpic 4 1
- 8c00 0 0 4 &mpic 1 1
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 5 - PCI slot 1 */
- 8d00 0 0 1 &mpic 2 1
- 8d00 0 0 2 &mpic 3 1
- 8d00 0 0 3 &mpic 4 1
- 8d00 0 0 4 &mpic 1 1
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 6 - PCI slot 1 */
- 8e00 0 0 1 &mpic 2 1
- 8e00 0 0 2 &mpic 3 1
- 8e00 0 0 3 &mpic 4 1
- 8e00 0 0 4 &mpic 1 1
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 7 - PCI slot 1 */
- 8f00 0 0 1 &mpic 2 1
- 8f00 0 0 2 &mpic 3 1
- 8f00 0 0 3 &mpic 4 1
- 8f00 0 0 4 &mpic 1 1
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 func 0 - PCI slot 2 */
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 1 1
- 9000 0 0 4 &mpic 2 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 1 - PCI slot 2 */
- 9100 0 0 1 &mpic 3 1
- 9100 0 0 2 &mpic 4 1
- 9100 0 0 3 &mpic 1 1
- 9100 0 0 4 &mpic 2 1
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 2 - PCI slot 2 */
- 9200 0 0 1 &mpic 3 1
- 9200 0 0 2 &mpic 4 1
- 9200 0 0 3 &mpic 1 1
- 9200 0 0 4 &mpic 2 1
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 3 - PCI slot 2 */
- 9300 0 0 1 &mpic 3 1
- 9300 0 0 2 &mpic 4 1
- 9300 0 0 3 &mpic 1 1
- 9300 0 0 4 &mpic 2 1
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 4 - PCI slot 2 */
- 9400 0 0 1 &mpic 3 1
- 9400 0 0 2 &mpic 4 1
- 9400 0 0 3 &mpic 1 1
- 9400 0 0 4 &mpic 2 1
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 5 - PCI slot 2 */
- 9500 0 0 1 &mpic 3 1
- 9500 0 0 2 &mpic 4 1
- 9500 0 0 3 &mpic 1 1
- 9500 0 0 4 &mpic 2 1
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 6 - PCI slot 2 */
- 9600 0 0 1 &mpic 3 1
- 9600 0 0 2 &mpic 4 1
- 9600 0 0 3 &mpic 1 1
- 9600 0 0 4 &mpic 2 1
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 7 - PCI slot 2 */
- 9700 0 0 1 &mpic 3 1
- 9700 0 0 2 &mpic 4 1
- 9700 0 0 3 &mpic 1 1
- 9700 0 0 4 &mpic 2 1
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 c 2
- e100 0 0 2 &i8259 9 2
- e200 0 0 3 &i8259 a 2
- e300 0 0 4 &i8259 b 2
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 6 2
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 7 2
- f100 0 0 1 &i8259 7 2
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 e 2
- f900 0 0 1 &i8259 5 2
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
uli1575@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0 01000000 0 0
- 00001000>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
@@ -412,29 +413,29 @@
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
- reg = <0>;
+ reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
- reg = <1>;
+ reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
gpio@400 {
- reg = <1 400 80>;
+ reg = <0x1 0x400 0x80>;
};
};
};
@@ -449,33 +450,33 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <ffe09000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 ffc10000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xffe09000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
};
};
@@ -486,33 +487,33 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <ffe0a000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 c0000000 c0000000 0 20000000
- 01000000 0 00000000 ffc20000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xffe0a000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1b 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <27 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 c0000000
- 02000000 0 c0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 79385bcd5c5..7f9b999843c 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -13,7 +13,7 @@
/ {
model = "MPC8641HPCN";
- compatible = "mpc86xx";
+ compatible = "fsl,mpc8641hpcn";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index daf9433e906..765e43c997d 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -2,6 +2,7 @@
* MPC866 ADS Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +10,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC866ADS";
@@ -22,37 +24,37 @@
PowerPC,866@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <10>; // 16 bytes
- i-cache-line-size = <10>; // 16 bytes
- d-cache-size = <2000>; // L1, 8K
- i-cache-size = <4000>; // L1, 16K
+ reg = <0x0>;
+ d-cache-line-size = <16>; // 16 bytes
+ i-cache-line-size = <16>; // 16 bytes
+ d-cache-size = <0x2000>; // L1, 8K
+ i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
- interrupts = <f 2>; // decrementer interrupt
+ interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
- reg = <00000000 800000>;
+ reg = <0x0 0x800000>;
};
localbus@ff000100 {
compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <ff000100 40>;
+ reg = <0xff000100 0x40>;
ranges = <
- 1 0 ff080000 00008000
- 5 0 ff0a0000 00008000
+ 0x1 0x0 0xff080000 0x8000
+ 0x5 0x0 0xff0a0000 0x8000
>;
board-control@1,0 {
- reg = <1 0 20 5 300 4>;
+ reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
compatible = "fsl,mpc866ads-bcsr";
};
};
@@ -61,17 +63,17 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 ff000000 00100000>;
- reg = <ff000000 00000200>;
+ ranges = <0x0 0xff000000 0x100000>;
+ reg = <0xff000000 0x200>;
bus-frequency = <0>;
mdio@e00 {
compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY: ethernet-phy@f {
- reg = <f>;
+ reg = <0xf>;
device_type = "ethernet-phy";
};
};
@@ -80,7 +82,7 @@
device_type = "network";
compatible = "fsl,mpc866-fec-enet",
"fsl,pq1-fec-enet";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
@@ -91,7 +93,7 @@
PIC: pic@0 {
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0 24>;
+ reg = <0x0 0x24>;
compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
};
@@ -100,7 +102,7 @@
#size-cells = <1>;
compatible = "fsl,mpc866-cpm", "fsl,cpm1";
ranges;
- reg = <9c0 40>;
+ reg = <0x9c0 0x40>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
@@ -108,11 +110,11 @@
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 2000 2000>;
+ ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 1c00>;
+ reg = <0x0 0x1c00>;
};
};
@@ -120,7 +122,7 @@
compatible = "fsl,mpc866-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
- reg = <9f0 10>;
+ reg = <0x9f0 0x10>;
clock-frequency = <0>;
};
@@ -130,7 +132,7 @@
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
- reg = <930 20>;
+ reg = <0x930 0x20>;
compatible = "fsl,mpc866-cpm-pic",
"fsl,cpm1-pic";
};
@@ -140,31 +142,31 @@
device_type = "serial";
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a80 10 3e80 40>;
+ reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <0090>;
+ fsl,cpm-command = <0x90>;
};
serial@a90 {
device_type = "serial";
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a90 10 3f80 40>;
+ reg = <0xa90 0x10 0x3f80 0x40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <00d0>;
+ fsl,cpm-command = <0xd0>;
};
ethernet@a00 {
device_type = "network";
compatible = "fsl,mpc866-scc-enet",
"fsl,cpm1-scc-enet";
- reg = <a00 18 3c00 100>;
+ reg = <0xa00 0x18 0x3c00 0x100>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1e>;
+ interrupts = <30>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-command = <0000>;
linux,network-index = <1>;
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index d84a012c2aa..9895043722b 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -2,7 +2,7 @@
* MPC885 ADS Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -10,6 +10,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC885ADS";
@@ -23,45 +24,45 @@
PowerPC,885@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <d#16>;
- i-cache-line-size = <d#16>;
- d-cache-size = <d#8192>;
- i-cache-size = <d#8192>;
+ reg = <0x0>;
+ d-cache-line-size = <16>;
+ i-cache-line-size = <16>;
+ d-cache-size = <8192>;
+ i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
- interrupts = <f 2>; // decrementer interrupt
+ interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x0 0x0>;
};
localbus@ff000100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <ff000100 40>;
+ reg = <0xff000100 0x40>;
ranges = <
- 0 0 fe000000 00800000
- 1 0 ff080000 00008000
- 5 0 ff0a0000 00008000
+ 0x0 0x0 0xfe000000 0x800000
+ 0x1 0x0 0xff080000 0x8000
+ 0x5 0x0 0xff0a0000 0x8000
>;
flash@0,0 {
compatible = "jedec-flash";
- reg = <0 0 800000>;
+ reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
board-control@1,0 {
- reg = <1 0 20 5 300 4>;
+ reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
compatible = "fsl,mpc885ads-bcsr";
};
};
@@ -71,30 +72,30 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 ff000000 00004000>;
+ ranges = <0x0 0xff000000 0x4000>;
bus-frequency = <0>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
- reg = <ff000000 4000>;
+ reg = <0xff000000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
};
@@ -103,7 +104,7 @@
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
@@ -115,7 +116,7 @@
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
- reg = <1e00 188>;
+ reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
@@ -126,7 +127,7 @@
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0 24>;
+ reg = <0x0 0x24>;
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
};
@@ -136,29 +137,29 @@
#size-cells = <2>;
compatible = "fsl,pq-pcmcia";
device_type = "pcmcia";
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&PIC>;
- interrupts = <d 1>;
+ interrupts = <13 1>;
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
- command-proc = <9c0>;
+ command-proc = <0x9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
- reg = <9c0 40>;
+ reg = <0x9c0 0x40>;
ranges;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 2000 2000>;
+ ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 1c00>;
+ reg = <0x0 0x1c00>;
};
};
@@ -167,7 +168,7 @@
"fsl,cpm1-brg",
"fsl,cpm-brg";
clock-frequency = <0>;
- reg = <9f0 10>;
+ reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
@@ -175,7 +176,7 @@
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
- reg = <930 20>;
+ reg = <0x930 0x20>;
compatible = "fsl,mpc885-cpm-pic",
"fsl,cpm1-pic";
};
@@ -184,34 +185,34 @@
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a80 10 3e80 40>;
+ reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <0090>;
+ fsl,cpm-command = <0x90>;
};
serial@a90 {
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a90 10 3f80 40>;
+ reg = <0xa90 0x10 0x3f80 0x40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <00d0>;
+ fsl,cpm-command = <0xd0>;
};
ethernet@a40 {
device_type = "network";
compatible = "fsl,mpc885-scc-enet",
"fsl,cpm1-scc-enet";
- reg = <a40 18 3e00 100>;
+ reg = <0xa40 0x18 0x3e00 0x100>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1c>;
+ interrupts = <28>;
interrupt-parent = <&CPM_PIC>;
phy-handle = <&PHY2>;
- fsl,cpm-command = <0080>;
+ fsl,cpm-command = <0x80>;
linux,network-index = <2>;
};
};
diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts
index 2d564921897..b2d61091b36 100644
--- a/arch/powerpc/boot/dts/pq2fads.dts
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -1,7 +1,7 @@
/*
* Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,8 @@
* option) any later version.
*/
+/dts-v1/;
+
/ {
model = "pq2fads";
compatible = "fsl,pq2fads";
@@ -21,11 +23,11 @@
cpu@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <d#32>;
- i-cache-line-size = <d#32>;
- d-cache-size = <d#16384>;
- i-cache-size = <d#16384>;
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
timebase-frequency = <0>;
clock-frequency = <0>;
};
@@ -33,7 +35,7 @@
memory {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x0 0x0>;
};
localbus@f0010100 {
@@ -41,67 +43,67 @@
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <f0010100 60>;
+ reg = <0xf0010100 0x60>;
- ranges = <0 0 fe000000 00800000
- 1 0 f4500000 00008000
- 8 0 f8200000 00008000>;
+ ranges = <0x0 0x0 0xfe000000 0x800000
+ 0x1 0x0 0xf4500000 0x8000
+ 0x8 0x0 0xf8200000 0x8000>;
flash@0,0 {
compatible = "jedec-flash";
- reg = <0 0 800000>;
+ reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
bcsr@1,0 {
- reg = <1 0 20>;
+ reg = <0x1 0x0 0x20>;
compatible = "fsl,pq2fads-bcsr";
};
PCI_PIC: pic@8,0 {
#interrupt-cells = <1>;
interrupt-controller;
- reg = <8 0 8>;
+ reg = <0x8 0x0 0x8>;
compatible = "fsl,pq2ads-pci-pic";
interrupt-parent = <&PIC>;
- interrupts = <18 8>;
+ interrupts = <24 8>;
};
};
pci@f0010800 {
device_type = "pci";
- reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+ reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- clock-frequency = <d#66000000>;
- interrupt-map-mask = <f800 0 0 7>;
+ clock-frequency = <66000000>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x16 */
- b000 0 0 1 &PCI_PIC 0
- b000 0 0 2 &PCI_PIC 1
- b000 0 0 3 &PCI_PIC 2
- b000 0 0 4 &PCI_PIC 3
+ 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+ 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+ 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+ 0xb000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 0x17 */
- b800 0 0 1 &PCI_PIC 4
- b800 0 0 2 &PCI_PIC 5
- b800 0 0 3 &PCI_PIC 6
- b800 0 0 4 &PCI_PIC 7
+ 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+ 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+ 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+ 0xb800 0x0 0x0 0x4 &PCI_PIC 7
/* IDSEL 0x18 */
- c000 0 0 1 &PCI_PIC 8
- c000 0 0 2 &PCI_PIC 9
- c000 0 0 3 &PCI_PIC a
- c000 0 0 4 &PCI_PIC b>;
+ 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+ 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+ 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+ 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
interrupt-parent = <&PIC>;
- interrupts = <12 8>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 f6000000 0 02000000>;
+ interrupts = <18 8>;
+ ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
};
soc@f0000000 {
@@ -109,27 +111,27 @@
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8280", "fsl,pq2-soc";
- ranges = <00000000 f0000000 00053000>;
+ ranges = <0x0 0xf0000000 0x53000>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
- reg = <f0000000 00053000>;
+ reg = <0xf0000000 0x53000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
- reg = <119c0 30>;
+ reg = <0x119c0 0x30>;
ranges;
muram@0 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 10000>;
+ ranges = <0x0 0x0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9800 800>;
+ reg = <0x0 0x2000 0x9800 0x800>;
};
};
@@ -137,53 +139,53 @@
compatible = "fsl,mpc8280-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <119f0 10 115f0 10>;
+ reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <11a00 20 8000 100>;
- interrupts = <28 8>;
+ reg = <0x11a00 0x20 0x8000 0x100>;
+ interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <00800000>;
+ fsl,cpm-command = <0x800000>;
};
serial@11a20 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <11a20 20 8100 100>;
- interrupts = <29 8>;
+ reg = <0x11a20 0x20 0x8100 0x100>;
+ interrupts = <41 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <04a00000>;
+ fsl,cpm-command = <0x4a00000>;
};
ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <11320 20 8500 100 113b0 1>;
- interrupts = <21 8>;
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
- fsl,cpm-command = <16200300>;
+ fsl,cpm-command = <0x16200300>;
};
ethernet@11340 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <11340 20 8600 100 113d0 1>;
- interrupts = <22 8>;
+ reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
+ interrupts = <34 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
- fsl,cpm-command = <1a400300>;
+ fsl,cpm-command = <0x1a400300>;
local-mac-address = [00 e0 0c 00 79 01];
};
@@ -194,21 +196,21 @@
"fsl,cpm2-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
- reg = <10d40 14>;
+ reg = <0x10d40 0x14>;
fsl,mdio-pin = <9>;
- fsl,mdc-pin = <a>;
+ fsl,mdc-pin = <10>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
- interrupts = <19 2>;
- reg = <0>;
+ interrupts = <25 2>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
- interrupts = <19 2>;
- reg = <3>;
+ interrupts = <25 2>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -218,17 +220,17 @@
#size-cells = <0>;
compatible = "fsl,mpc8280-usb",
"fsl,cpm2-usb";
- reg = <11b60 18 8b00 100>;
+ reg = <0x11b60 0x18 0x8b00 0x100>;
interrupt-parent = <&PIC>;
- interrupts = <b 8>;
- fsl,cpm-command = <2e600000>;
+ interrupts = <11 8>;
+ fsl,cpm-command = <0x2e600000>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
- reg = <10c00 80>;
+ reg = <0x10c00 0x80>;
compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
};
diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
index 297dfa53fe9..1ee6ff43dd5 100644
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -11,6 +11,8 @@
* if it can determine the exact PrPMC type.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -25,46 +27,46 @@
PowerPC,7447 {
device_type = "cpu";
reg = <0>;
- clock-frequency = <2bb0b140>; /* Default (733 MHz) */
- bus-frequency = <7f28155>; /* 133.333333 MHz */
- timebase-frequency = <1fca055>; /* 33.333333 MHz */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ clock-frequency = <733333333>; /* Default */
+ bus-frequency = <133333333>;
+ timebase-frequency = <33333333>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
};
};
memory {
device_type = "memory";
- reg = <00000000 20000000>; /* Default (512MB) */
+ reg = <0x0 0x20000000>; /* Default (512MB) */
};
- mv64x60@f1000000 { /* Marvell Discovery */
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
- compatible = "marvell,mv64x60";
- clock-frequency = <7f28155>; /* 133.333333 MHz */
- reg = <f1000000 00010000>;
- virtual-reg = <f1000000>;
- ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */
- 80000000 80000000 08000000 /* PCI 0 MEM Space */
- a0000000 a0000000 04000000 /* User FLASH */
- 00000000 f1000000 00010000 /* Bridge's regs */
- f2000000 f2000000 00040000>; /* Integrated SRAM */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
flash@a0000000 {
device_type = "rom";
compatible = "direct-mapped";
- reg = <a0000000 4000000>; /* Default (64MB) */
+ reg = <0xa0000000 0x4000000>; /* Default (64MB) */
probe-type = "CFI";
bank-width = <4>;
- partitions = <00000000 00100000 /* RO */
- 00100000 00040001 /* RW */
- 00140000 00400000 /* RO */
- 00540000 039c0000 /* RO */
- 03f00000 00100000>; /* RO */
+ partitions = <0x00000000 0x00100000 /* RO */
+ 0x00100000 0x00040001 /* RW */
+ 0x00140000 0x00400000 /* RO */
+ 0x00540000 0x039c0000 /* RO */
+ 0x03f00000 0x00100000>; /* RO */
partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
};
@@ -72,171 +74,153 @@
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
- compatible = "marvell,mv64x60-mdio";
- ethernet-phy@1 {
+ compatible = "marvell,mv64360-mdio";
+ PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <1>;
};
- ethernet-phy@3 {
+ PHY1: ethernet-phy@3 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <3>;
};
};
- ethernet@2000 {
- reg = <2000 2000>;
- eth0 {
+ ethernet-group@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-group";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
- block-index = <0>;
- interrupts = <20>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@1>;
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
- eth1 {
+ ethernet@1 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
- block-index = <1>;
- interrupts = <21>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@3>;
+ compatible = "marvell,mv64360-eth";
+ reg = <1>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY1>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
};
- sdma@4000 {
- device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
- reg = <4000 c18>;
- virtual-reg = <f1004000>;
- interrupt-base = <0>;
- interrupts = <24>;
- interrupt-parent = <&/mv64x60/pic>;
+ SDMA0: sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
};
- sdma@6000 {
- device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
- reg = <6000 c18>;
- virtual-reg = <f1006000>;
- interrupt-base = <0>;
- interrupts = <26>;
- interrupt-parent = <&/mv64x60/pic>;
+ SDMA1: sdma@6000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x6000 0xc18>;
+ virtual-reg = <0xf1006000>;
+ interrupts = <38>;
+ interrupt-parent = <&PIC>;
};
- brg@b200 {
- compatible = "marvell,mv64x60-brg";
- reg = <b200 8>;
+ BRG0: brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
- bcr = <0>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
};
- brg@b208 {
- compatible = "marvell,mv64x60-brg";
- reg = <b208 8>;
+ BRG1: brg@b208 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb208 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
- bcr = <0>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
};
- cunit@f200 {
- reg = <f200 200>;
+ CUNIT: cunit@f200 {
+ reg = <0xf200 0x200>;
};
- mpscrouting@b400 {
- reg = <b400 c>;
+ MPSCROUTING: mpscrouting@b400 {
+ reg = <0xb400 0xc>;
};
- mpscintr@b800 {
- reg = <b800 100>;
- virtual-reg = <f100b800>;
+ MPSCINTR: mpscintr@b800 {
+ reg = <0xb800 0x100>;
+ virtual-reg = <0xf100b800>;
};
- mpsc@8000 {
+ MPSC0: mpsc@8000 {
device_type = "serial";
- compatible = "marvell,mpsc";
- reg = <8000 38>;
- virtual-reg = <f1008000>;
- sdma = <&/mv64x60/sdma@4000>;
- brg = <&/mv64x60/brg@b200>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
- block-index = <0>;
- max_idle = <28>;
- chr_1 = <0>;
- chr_2 = <0>;
- chr_10 = <3>;
- mpcr = <0>;
- interrupts = <28>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
};
- mpsc@9000 {
+ MPSC1: mpsc@9000 {
device_type = "serial";
- compatible = "marvell,mpsc";
- reg = <9000 38>;
- virtual-reg = <f1009000>;
- sdma = <&/mv64x60/sdma@6000>;
- brg = <&/mv64x60/brg@b208>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
- block-index = <1>;
- max_idle = <28>;
- chr_1 = <0>;
- chr_2 = <0>;
- chr_10 = <3>;
- mpcr = <0>;
- interrupts = <2a>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x9000 0x38>;
+ virtual-reg = <0xf1009000>;
+ sdma = <&SDMA1>;
+ brg = <&BRG1>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <1>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
};
wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64x60-wdt";
- reg = <b410 8>;
- timeout = <a>; /* wdt timeout in seconds */
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
};
i2c@c000 {
device_type = "i2c";
- compatible = "marvell,mv64x60-i2c";
- reg = <c000 20>;
- virtual-reg = <f100c000>;
- freq_m = <8>;
- freq_n = <3>;
- timeout = <3e8>; /* 1000 = 1 second */
- retries = <1>;
- interrupts = <25>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
};
- pic {
+ PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
- compatible = "marvell,mv64x60-pic";
- reg = <0000 88>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
- compatible = "marvell,mv64x60-mpp";
- reg = <f000 10>;
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
};
gpp@f100 {
- compatible = "marvell,mv64x60-gpp";
- reg = <f100 20>;
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
};
pci@80000000 {
@@ -244,73 +228,75 @@
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
- compatible = "marvell,mv64x60-pci";
- reg = <0cf8 8>;
- ranges = <01000000 0 0 88000000 0 01000000
- 02000000 0 80000000 80000000 0 08000000>;
- bus-range = <0 ff>;
- clock-frequency = <3EF1480>;
- interrupt-pci-iack = <0c34>;
- interrupt-parent = <&/mv64x60/pic>;
- interrupt-map-mask = <f800 0 0 7>;
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-pci-iack = <0xc34>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0a */
- 5000 0 0 1 &/mv64x60/pic 50
- 5000 0 0 2 &/mv64x60/pic 51
- 5000 0 0 3 &/mv64x60/pic 5b
- 5000 0 0 4 &/mv64x60/pic 5d
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
/* IDSEL 0x0b */
- 5800 0 0 1 &/mv64x60/pic 5b
- 5800 0 0 2 &/mv64x60/pic 5d
- 5800 0 0 3 &/mv64x60/pic 50
- 5800 0 0 4 &/mv64x60/pic 51
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
/* IDSEL 0x0c */
- 6000 0 0 1 &/mv64x60/pic 5b
- 6000 0 0 2 &/mv64x60/pic 5d
- 6000 0 0 3 &/mv64x60/pic 50
- 6000 0 0 4 &/mv64x60/pic 51
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
/* IDSEL 0x0d */
- 6800 0 0 1 &/mv64x60/pic 5d
- 6800 0 0 2 &/mv64x60/pic 50
- 6800 0 0 3 &/mv64x60/pic 51
- 6800 0 0 4 &/mv64x60/pic 5b
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
>;
};
cpu-error@0070 {
- compatible = "marvell,mv64x60-cpu-error";
- reg = <0070 10 0128 28>;
- interrupts = <03>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
- compatible = "marvell,mv64x60-sram-ctrl";
- reg = <0380 80>;
- interrupts = <0d>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
};
pci-error@1d40 {
- compatible = "marvell,mv64x60-pci-error";
- reg = <1d40 40 0c28 4>;
- interrupts = <0c>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
- compatible = "marvell,mv64x60-mem-ctrl";
- reg = <1400 60>;
- interrupts = <11>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
};
};
chosen {
bootargs = "ip=on";
- linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+ linux,stdout-path = &MPSC0;
};
};
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index f947c75a2e9..6a8fa7089ea 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -254,7 +254,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
@@ -270,7 +269,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -284,7 +283,6 @@
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
@@ -300,7 +298,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
new file mode 100644
index 00000000000..3eebeec157b
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -0,0 +1,352 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "SBC8641D";
+ compatible = "wind,sbc8641";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>; // L1
+ i-cache-size = <32768>; // L1
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; // 512M at 0x0
+ };
+
+ localbus@f8005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0xf8005000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xf0000000 0x00010000 // 64KB EEPROM
+ 2 0 0xf1000000 0x00100000 // EPLD (1MB)
+ 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3)
+ 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4)
+ 6 0 0xf4000000 0x00100000 // LCD display (1MB)
+ 7 0 0xe8000000 0x04000000>; // 64MB OneNAND
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "dtb";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@300000 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "fs";
+ reg = <0x00500000 0x00a00000>;
+ };
+ partition@700000 {
+ label = "firmware";
+ reg = <0x00f00000 0x00100000>;
+ read-only;
+ };
+ };
+
+ epld@2,0 {
+ compatible = "wrs,epld-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <2 0 0x100000>;
+ ranges = <0 0 5 0 1 // User switches
+ 1 0 5 1 1 // Board ID/Rev
+ 3 0 5 3 1>; // LEDs
+ };
+ };
+
+ soc@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf8000000 0x00100000>;
+ reg = <0xf8000000 0x00001000>; // CCSRBAR
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@1f {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1f>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: ethernet@24000 {
+ cell-index = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ cell-index = <1>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet2: ethernet@26000 {
+ cell-index = <2>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet3: ethernet@27000 {
+ cell-index = <3>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <28 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@f8008000 {
+ cell-index = <0>;
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf8008000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 0 1
+ 0x0000 0 0 2 &mpic 1 1
+ 0x0000 0 0 3 &mpic 2 1
+ 0x0000 0 0 4 &mpic 3 1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
+ };
+
+ };
+
+ pci1: pcie@f8009000 {
+ cell-index = <1>;
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf8009000 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 8db9515d7dc..a1ae4d6ec99 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -269,7 +269,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
@@ -285,7 +284,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -299,7 +298,6 @@
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
@@ -315,7 +313,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index 8278068c802..e808e1c5593 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -104,6 +104,16 @@
// FIXME: anything else?
};
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+ dcr-reg = <20 8 /* Internal SRAM DCR's */
+ 30 8>; /* L2 cache DCR's */
+ cache-line-size = <20>; /* 32 bytes */
+ cache-size = <40000>; /* L2, 256K */
+ interrupt-parent = <&UIC2>;
+ interrupts = <17 1>;
+ };
+
plb {
compatible = "ibm,plb-440gx", "ibm,plb4";
#address-cells = <2>;
@@ -232,10 +242,18 @@
reg = <40000790 8>;
};
+ TAH0: emac-tah@40000b50 {
+ compatible = "ibm,tah-440gx", "ibm,tah";
+ reg = <40000b50 30>;
+ };
+
+ TAH1: emac-tah@40000d50 {
+ compatible = "ibm,tah-440gx", "ibm,tah";
+ reg = <40000d50 30>;
+ };
EMAC0: ethernet@40000800 {
unused = <1>;
- linux,network-index = <2>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
@@ -256,7 +274,6 @@
};
EMAC1: ethernet@40000900 {
unused = <1>;
- linux,network-index = <3>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
@@ -277,7 +294,6 @@
};
EMAC2: ethernet@40000c00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
@@ -288,7 +304,7 @@
mal-tx-channel = <2>;
mal-rx-channel = <2>;
cell-index = <2>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -297,10 +313,11 @@
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
zmii-channel = <2>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
};
EMAC3: ethernet@40000e00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
@@ -311,7 +328,7 @@
mal-tx-channel = <3>;
mal-rx-channel = <3>;
cell-index = <3>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -320,6 +337,8 @@
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
zmii-channel = <3>;
+ tah-device = <&TAH1>;
+ tah-channel = <0>;
};
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index dcc21b0438e..a328607c8f8 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -125,7 +125,6 @@
};
EMAC: ethernet@ef600800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index dc1499d30f4..b04a52e22bf 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -204,7 +204,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
new file mode 100644
index 00000000000..0d6d332814e
--- /dev/null
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -0,0 +1,304 @@
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,yosemite";
+ compatible = "amcc,yosemite","amcc,bamboo";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ serial2 = &UART2;
+ serial3 = &UART3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440EP";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440ep";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440ep";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ DMA0: dma {
+ compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+ dcr-reg = <100 027>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+ /*RXEOB*/ 1 &UIC0 b 4
+ /*SERR*/ 2 &UIC1 0 4
+ /*TXDE*/ 3 &UIC1 1 4
+ /*RXDE*/ 4 &UIC1 2 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Bamboo is oddball in the 44x world and doesn't use the ERPN
+ * bits.
+ */
+ ranges = <00000000 0 00000000 80000000
+ 80000000 0 80000000 80000000>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <7 4>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ status = "disabled";
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <4 4>;
+ status = "disabled";
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <7 4>;
+ };
+
+ spi@ef600900 {
+ compatible = "amcc,spi-440ep";
+ reg = <ef600900 6>;
+ interrupts = <8 4>;
+ interrupt-parent = <&UIC0>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4 1f 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2 3>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <1>;
+ };
+
+ usb@ef601000 {
+ compatible = "ohci-be";
+ reg = <ef601000 80>;
+ interrupts = <8 4 9 4>;
+ interrupt-parent = < &UIC1 >;
+ };
+ };
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0 eec00000 8 /* Config space access */
+ 0 eed00000 4 /* IACK */
+ 0 eed00000 4 /* Special cycle */
+ 0 ef400000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+ 01000000 0 00000000 0 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Bamboo has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1b 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1a 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 19 8
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c
index f61364c47a7..5532ab3221d 100644
--- a/arch/powerpc/boot/ebony.c
+++ b/arch/powerpc/boot/ebony.c
@@ -75,7 +75,8 @@ static void ebony_fixups(void)
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
ibm4xx_sdram_fixup_memsize();
- dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+ dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
+ dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ebony_flashsel_fixup();
}
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index 59016bef139..c541fd8a95d 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -35,7 +35,7 @@
#define check_err(err) \
({ \
if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
- printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \
+ printf("%s():%d %s\n\r", __func__, __LINE__, \
fdt_strerror(err)); \
if (BAD_ERROR(err)) \
exit(); \
diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c
index 1074626e6a3..d4cb4e4e093 100644
--- a/arch/powerpc/boot/mpc52xx-psc.c
+++ b/arch/powerpc/boot/mpc52xx-psc.c
@@ -51,14 +51,9 @@ static unsigned char psc_getc(void)
int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp)
{
- int n;
-
/* Get the base address of the psc registers */
- n = getprop(devp, "virtual-reg", &psc, sizeof(psc));
- if (n != sizeof(psc)) {
- if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL))
- return -1;
- }
+ if (dt_get_virtual_reg(devp, &psc, 1) < 1)
+ return -1;
scdp->open = psc_open;
scdp->putc = psc_putc;
diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c
index 802ea53790d..425ad88cce8 100644
--- a/arch/powerpc/boot/mpsc.c
+++ b/arch/powerpc/boot/mpsc.c
@@ -141,7 +141,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp)
if (mpscintr_base == NULL)
goto err_out;
- n = getprop(devp, "block-index", &v, sizeof(v));
+ n = getprop(devp, "cell-index", &v, sizeof(v));
if (n != sizeof(v))
goto err_out;
reg_set = (int)v;
diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c
index b43259455d4..d9bb302b91d 100644
--- a/arch/powerpc/boot/mv64x60.c
+++ b/arch/powerpc/boot/mv64x60.c
@@ -535,7 +535,7 @@ u8 *mv64x60_get_bridge_pbase(void)
u32 v[2];
void *devp;
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
goto err_out;
if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
@@ -553,7 +553,7 @@ u8 *mv64x60_get_bridge_base(void)
u32 v;
void *devp;
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
goto err_out;
if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c
index d085377be3b..52a3212b663 100644
--- a/arch/powerpc/boot/mv64x60_i2c.c
+++ b/arch/powerpc/boot/mv64x60_i2c.c
@@ -185,7 +185,7 @@ int mv64x60_i2c_open(void)
u32 v;
void *devp;
- devp = finddevice("/mv64x60/i2c");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
if (devp == NULL)
goto err_out;
if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
index f8f1b2f3141..aef3bdc8916 100644
--- a/arch/powerpc/boot/ns16550.c
+++ b/arch/powerpc/boot/ns16550.c
@@ -55,15 +55,9 @@ static u8 ns16550_tstc(void)
int ns16550_console_init(void *devp, struct serial_console_data *scdp)
{
int n;
- unsigned long reg_phys;
- n = getprop(devp, "virtual-reg", &reg_base, sizeof(reg_base));
- if (n != sizeof(reg_base)) {
- if (!dt_xlate_reg(devp, 0, &reg_phys, NULL))
- return -1;
-
- reg_base = (void *)reg_phys;
- }
+ if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+ return -1;
n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
if (n != sizeof(reg_shift))
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 4b0544b03c6..321e2f5afe7 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size);
int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr);
int dt_is_compatible(void *node, const char *compat);
void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize);
+int dt_get_virtual_reg(void *node, void **addr, int nres);
static inline void *finddevice(const char *name)
{
diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c
index 05c3245b30d..da31d603048 100644
--- a/arch/powerpc/boot/prpmc2800.c
+++ b/arch/powerpc/boot/prpmc2800.c
@@ -344,20 +344,20 @@ static void prpmc2800_bridge_setup(u32 mem_size)
acc_bits);
/* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = finddevice("/mv64x60/pci@80000000");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
if (devp == NULL)
- fatal("Error: Missing /mv64x60/pci@80000000"
+ fatal("Error: Missing marvell,mv64360-pci"
" device tree node\n\r");
rc = getprop(devp, "ranges", v, sizeof(v));
if (rc != sizeof(v))
- fatal("Error: Can't find /mv64x60/pci@80000000/ranges"
+ fatal("Error: Can't find marvell,mv64360-pci ranges"
" property\n\r");
/* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
- fatal("Error: Missing /mv64x60 device tree node\n\r");
+ fatal("Error: Missing marvell,mv64360 device tree node\n\r");
enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
enables |= 0x0007fe00; /* Disable all cpu->pci windows */
@@ -429,9 +429,9 @@ static void prpmc2800_fixups(void)
setprop(devp, "model", model, l);
/* Set /cpus/PowerPC,7447/clock-frequency */
- devp = finddevice("/cpus/PowerPC,7447");
+ devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
if (devp == NULL)
- fatal("Error: Missing proper /cpus device tree node\n\r");
+ fatal("Error: Missing proper cpu device tree node\n\r");
v[0] = bip->core_speed;
setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
@@ -443,16 +443,17 @@ static void prpmc2800_fixups(void)
v[1] = bip->mem_size;
setprop(devp, "reg", v, sizeof(v));
- /* Update /mv64x60/model, if this is a mv64362 */
+ /* Update model, if this is a mv64362 */
if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
- fatal("Error: Missing /mv64x60 device tree node\n\r");
+ fatal("Error: Missing marvell,mv64360"
+ " device tree node\n\r");
setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
}
/* Set User FLASH size */
- devp = finddevice("/mv64x60/flash@a0000000");
+ devp = find_node_by_compatible(NULL, "direct-mapped");
if (devp == NULL)
fatal("Error: Missing User FLASH device tree node\n\r");
rc = getprop(devp, "reg", v, sizeof(v));
diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S
index a55c2735f75..b6fcbaf5027 100644
--- a/arch/powerpc/boot/ps3-head.S
+++ b/arch/powerpc/boot/ps3-head.S
@@ -27,8 +27,9 @@
/*
* __system_reset_overlay - The PS3 first stage entry.
*
- * The bootwraper build script copies the 0x100 bytes at symbol
- * __system_reset_overlay to offset 0x100 of the rom image.
+ * The bootwraper build script copies the 512 bytes at symbol
+ * __system_reset_overlay to offset 0x100 of the rom image. This symbol
+ * must occupy 512 or less bytes.
*
* The PS3 has a single processor with two threads.
*/
@@ -47,8 +48,6 @@ __system_reset_overlay:
mfspr r3, 0x88
cntlzw. r3, r3
- li r4, 0
- li r5, 0
beq 1f
/* Secondary goes to __secondary_hold in kernel. */
@@ -57,8 +56,14 @@ __system_reset_overlay:
mtctr r4
bctr
- /* Primary delays then goes to _zimage_start in wrapper. */
1:
+ /* Save the value at addr zero for a null pointer write check later. */
+
+ li r4, 0
+ lwz r3, 0(r4)
+
+ /* Primary delays then goes to _zimage_start in wrapper. */
+
or 31, 31, 31 /* db16cyc */
or 31, 31, 31 /* db16cyc */
@@ -67,16 +72,18 @@ __system_reset_overlay:
mtctr r4
bctr
+ . = __system_reset_overlay + 512
+
/*
* __system_reset_kernel - Place holder for the kernel reset vector.
*
- * The bootwrapper build script copies 0x100 bytes from offset 0x100
+ * The bootwrapper build script copies 512 bytes from offset 0x100
* of the rom image to the symbol __system_reset_kernel. At runtime
- * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel
- * to ram address 0x100. This symbol must occupy 0x100 bytes.
+ * the bootwrapper program copies the 512 bytes at __system_reset_kernel
+ * to ram address 0x100. This symbol must occupy 512 bytes.
*/
.globl __system_reset_kernel
__system_reset_kernel:
- . = __system_reset_kernel + 0x100
+ . = __system_reset_kernel + 512
diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c
index 3b0ac4d006e..9954d98871d 100644
--- a/arch/powerpc/boot/ps3.c
+++ b/arch/powerpc/boot/ps3.c
@@ -27,10 +27,10 @@
#include "page.h"
#include "ops.h"
-extern s64 lv1_panic(u64 in_1);
-extern s64 lv1_get_logical_partition_id(u64 *out_1);
-extern s64 lv1_get_logical_ppe_id(u64 *out_1);
-extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
+extern int lv1_panic(u64 in_1);
+extern int lv1_get_logical_partition_id(u64 *out_1);
+extern int lv1_get_logical_ppe_id(u64 *out_1);
+extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
u64 in_4, u64 in_5, u64 *out_1, u64 *out_2);
#ifdef DEBUG
@@ -46,6 +46,7 @@ BSS_STACK(4096);
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
*/
+
static char cmdline[COMMAND_LINE_SIZE]
__attribute__((__section__("__builtin_cmdline")));
@@ -75,7 +76,7 @@ static void ps3_exit(void)
static int ps3_repository_read_rm_size(u64 *rm_size)
{
- s64 result;
+ int result;
u64 lpar_id;
u64 ppe_id;
u64 v2;
@@ -114,16 +115,17 @@ void ps3_copy_vectors(void)
{
extern char __system_reset_kernel[];
- memcpy((void *)0x100, __system_reset_kernel, 0x100);
- flush_cache((void *)0x100, 0x100);
+ memcpy((void *)0x100, __system_reset_kernel, 512);
+ flush_cache((void *)0x100, 512);
}
-void platform_init(void)
+void platform_init(unsigned long null_check)
{
const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
void *chosen;
unsigned long ft_addr;
u64 rm_size;
+ unsigned long val;
console_ops.write = ps3_console_write;
platform_ops.exit = ps3_exit;
@@ -151,6 +153,11 @@ void platform_init(void)
printf(" flat tree at 0x%lx\n\r", ft_addr);
+ val = *(unsigned long *)0;
+
+ if (val != null_check)
+ printf("null check failed: %lx != %lx\n\r", val, null_check);
+
((kernel_entry_t)0)(ft_addr, 0, NULL);
ps3_exit();
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index 9960421eb6b..8b3607cb53f 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -119,7 +119,7 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "marvell,mpsc"))
+ else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
new file mode 100644
index 00000000000..86cd285bccc
--- /dev/null
+++ b/arch/powerpc/boot/simpleboot.c
@@ -0,0 +1,84 @@
+/*
+ * The simple platform -- for booting when firmware doesn't supply a device
+ * tree or any platform configuration information.
+ * All data is extracted from an embedded device tree
+ * blob.
+ *
+ * Authors: Scott Wood <scottwood@freescale.com>
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "io.h"
+#include "stdio.h"
+#include "libfdt/libfdt.h"
+
+BSS_STACK(4*1024);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ const u32 *na, *ns, *reg, *timebase;
+ u64 memsize64;
+ int node, size, i;
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ /* Find the #address-cells and #size-cells properties */
+ node = fdt_path_offset(_dtb_start, "/");
+ if (node < 0)
+ fatal("Cannot find root node\n");
+ na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
+ if (!na || (size != 4))
+ fatal("Cannot find #address-cells property");
+ ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
+ if (!ns || (size != 4))
+ fatal("Cannot find #size-cells property");
+
+ /* Find the memory range */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "memory", sizeof("memory"));
+ if (node < 0)
+ fatal("Cannot find memory node\n");
+ reg = fdt_getprop(_dtb_start, node, "reg", &size);
+ if (size < (*na+*ns) * sizeof(u32))
+ fatal("cannot get memory range\n");
+
+ /* Only interested in memory based at 0 */
+ for (i = 0; i < *na; i++)
+ if (*reg++ != 0)
+ fatal("Memory range is not based at address 0\n");
+
+ /* get the memsize and trucate it to under 4G on 32 bit machines */
+ memsize64 = 0;
+ for (i = 0; i < *ns; i++)
+ memsize64 = (memsize64 << 32) | *reg++;
+ if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
+ memsize64 = 0xffffffff;
+
+ /* finally, setup the timebase */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ /* Now we have the memory size; initialize the heap */
+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
+
+ /* prepare the device tree and find the console */
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c
index 472e36605a5..097974e59fa 100644
--- a/arch/powerpc/boot/treeboot-walnut.c
+++ b/arch/powerpc/boot/treeboot-walnut.c
@@ -68,7 +68,7 @@ static void walnut_fixups(void)
ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
ibm4xx_fixup_ebc_ranges("/plb/ebc");
walnut_flashsel_fixup();
- dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF);
+ dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
}
void platform_init(void)
diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S
new file mode 100644
index 00000000000..3edb13f9466
--- /dev/null
+++ b/arch/powerpc/boot/virtex405-head.S
@@ -0,0 +1,30 @@
+#include "ppc_asm.h"
+
+ .text
+ .global _zimage_start
+_zimage_start:
+
+ /* PPC errata 213: needed by Virtex-4 FX */
+ mfccr0 0
+ oris 0,0,0x50000000@h
+ mtccr0 0
+
+ /*
+ * Invalidate the data cache if the data cache is turned off.
+ * - The 405 core does not invalidate the data cache on power-up
+ * or reset but does turn off the data cache. We cannot assume
+ * that the cache contents are valid.
+ * - If the data cache is turned on this must have been done by
+ * a bootloader and we assume that the cache contents are
+ * valid.
+ */
+ mfdccr r9
+ cmplwi r9,0
+ bne 2f
+ lis r9,0
+ li r8,256
+ mtctr r8
+1: dccci r0,r9
+ addi r9,r9,0x20
+ bdnz 1b
+2: b _zimage_start_lib
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 8f8b8494d62..d6c96d9ab29 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,7 +174,7 @@ cuboot*)
*-mpc83*)
platformo=$object/cuboot-83xx.o
;;
- *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
+ *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
platformo=$object/cuboot-85xx-cpm2.o
;;
*-mpc85*|*-tqm8540|*-sbc85*)
@@ -199,6 +199,10 @@ adder875-redboot)
platformo="$object/fixed-head.o $object/redboot-8xx.o"
binary=y
;;
+simpleboot-virtex405-*)
+ platformo="$object/virtex405-head.o $object/simpleboot.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -226,10 +230,13 @@ if [ -n "$version" ]; then
uboot_version="-n Linux-$version"
fi
+# physical offset of kernel image
+membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
+
case "$platform" in
uboot)
rm -f "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
+ mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
@@ -298,15 +305,16 @@ treeboot*)
exit 0
;;
ps3)
- # The ps3's loader supports loading gzipped binary images from flash
- # rom to addr zero. The loader enters the image at addr 0x100. A
- # bootwrapper overlay is use to arrange for the kernel to be loaded
- # to addr zero and to have a suitable bootwrapper entry at 0x100.
- # To construct the rom image, 0x100 bytes from offset 0x100 in the
- # kernel is copied to the bootwrapper symbol __system_reset_kernel.
- # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
- # then copied to offset 0x100. At runtime the bootwrapper program
- # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
+ # The ps3's loader supports loading a gzipped binary image from flash
+ # rom to ram addr zero. The loader then enters the system reset
+ # vector at addr 0x100. A bootwrapper overlay is used to arrange for
+ # a binary image of the kernel to be at addr zero, and yet have a
+ # suitable bootwrapper entry at 0x100. To construct the final rom
+ # image 512 bytes from offset 0x100 is copied to the bootwrapper
+ # place holder at symbol __system_reset_kernel. The 512 bytes of the
+ # bootwrapper entry code at symbol __system_reset_overlay is then
+ # copied to offset 0x100. At runtime the bootwrapper program copies
+ # the data at __system_reset_kernel back to addr 0x100.
system_reset_overlay=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_overlay$' \
@@ -317,7 +325,7 @@ ps3)
| cut -d' ' -f1`
system_reset_kernel=`printf "%d" $system_reset_kernel`
overlay_dest="256"
- overlay_size="256"
+ overlay_size="512"
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
diff --git a/arch/powerpc/configs/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e24240a9a04..e24240a9a04 100644
--- a/arch/powerpc/configs/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
diff --git a/arch/powerpc/configs/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 2f475391f1d..2f475391f1d 100644
--- a/arch/powerpc/configs/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
diff --git a/arch/powerpc/configs/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 9ef4d8a312c..9ef4d8a312c 100644
--- a/arch/powerpc/configs/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
diff --git a/arch/powerpc/configs/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 3b2689e5002..3b2689e5002 100644
--- a/arch/powerpc/configs/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index c44db554cdc..c44db554cdc 100644
--- a/arch/powerpc/configs/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
new file mode 100644
index 00000000000..a3b763c45ec
--- /dev/null
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -0,0 +1,721 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Thu Feb 21 14:29:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_CANYONLANDS=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index 07c8d4ce175..07c8d4ce175 100644
--- a/arch/powerpc/configs/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
diff --git a/arch/powerpc/configs/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c8804ec01ea..c8804ec01ea 100644
--- a/arch/powerpc/configs/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
diff --git a/arch/powerpc/configs/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index dec18ca7351..dec18ca7351 100644
--- a/arch/powerpc/configs/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
diff --git a/arch/powerpc/configs/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index dd5d6303c39..dd5d6303c39 100644
--- a/arch/powerpc/configs/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
diff --git a/arch/powerpc/configs/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 087aedce133..087aedce133 100644
--- a/arch/powerpc/configs/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
diff --git a/arch/powerpc/configs/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 2313c3e8ef6..2313c3e8ef6 100644
--- a/arch/powerpc/configs/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 7a862a6e3be..7d18440e398 100644
--- a/arch/powerpc/configs/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:14 2008
+# Fri Apr 11 11:10:09 2008
#
# CONFIG_PPC64 is not set
@@ -196,6 +196,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -360,7 +361,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
#
# User Modules And Translation Layers
@@ -436,7 +437,7 @@ CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
# CONFIG_MTD_ONENAND is not set
#
@@ -1293,6 +1294,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 1f57456dd81..1f57456dd81 100644
--- a/arch/powerpc/configs/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 50cceda8994..50cceda8994 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index ac913025713..ac913025713 100644
--- a/arch/powerpc/configs/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e1de399a7bd..e1de399a7bd 100644
--- a/arch/powerpc/configs/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index b4e39cf82a8..b4e39cf82a8 100644
--- a/arch/powerpc/configs/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index b4e82c0e2be..b4e82c0e2be 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index d50a96eddcd..d50a96eddcd 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f377cde785b..f377cde785b 100644
--- a/arch/powerpc/configs/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a6331769d88..a6331769d88 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1f1518229f6..1f1518229f6 100644
--- a/arch/powerpc/configs/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
new file mode 100644
index 00000000000..2d0debcefdb
--- /dev/null
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -0,0 +1,899 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Mon Feb 11 16:25:19 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_KSI8560=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index b998539da86..b998539da86 100644
--- a/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 418bcdb5f91..a9f113b243a 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -162,6 +162,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -202,6 +203,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -1255,7 +1257,19 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+# CONFIG_FSL_DMA_SELFTEST is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
#
# Userspace I/O
@@ -1447,6 +1461,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 851ac911561..851ac911561 100644
--- a/arch/powerpc/configs/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 2b866b38560..2b866b38560 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 53aa6f3173a..53aa6f3173a 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index a469fe91881..a469fe91881 100644
--- a/arch/powerpc/configs/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
diff --git a/arch/powerpc/configs/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 67f67978c74..67f67978c74 100644
--- a/arch/powerpc/configs/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
diff --git a/arch/powerpc/configs/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index fef605579e2..fef605579e2 100644
--- a/arch/powerpc/configs/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
diff --git a/arch/powerpc/configs/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 1d303c49bb0..1d303c49bb0 100644
--- a/arch/powerpc/configs/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
diff --git a/arch/powerpc/configs/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index d39ee3b35bf..d39ee3b35bf 100644
--- a/arch/powerpc/configs/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
diff --git a/arch/powerpc/configs/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index cbf6ad2d71d..cbf6ad2d71d 100644
--- a/arch/powerpc/configs/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
diff --git a/arch/powerpc/configs/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index bbff962c847..bbff962c847 100644
--- a/arch/powerpc/configs/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
diff --git a/arch/powerpc/configs/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 63c5ec8b651..63c5ec8b651 100644
--- a/arch/powerpc/configs/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 38b85b211c3..d7fd298bd23 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:33:36 2008
+# Thu Mar 27 13:55:37 2008
#
# CONFIG_PPC64 is not set
@@ -74,8 +74,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -243,7 +241,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -1328,6 +1326,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0f82f66a60f..a20501f8947 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:36:41 2008
+# Thu Mar 27 13:55:43 2008
#
CONFIG_PPC64=y
@@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -276,7 +274,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -1596,6 +1594,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 8d9a84f5015..b3128fb7ce7 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:43:46 2008
+# Thu Mar 27 13:55:45 2008
#
CONFIG_PPC64=y
@@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -261,7 +259,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -1065,6 +1063,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b810d05644..7a166a39d92 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -333,7 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -374,6 +374,7 @@ CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
@@ -427,10 +428,129 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -536,6 +656,7 @@ CONFIG_USB_PEGASUS=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
@@ -783,12 +904,14 @@ CONFIG_USB_UHCI_HCD=y
#
# may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 029d2dab7de..9e0dd820169 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:25 2008
+# Linux kernel version: 2.6.25-rc9
+# Tue Apr 15 18:07:36 2008
#
# CONFIG_PPC64 is not set
@@ -201,6 +201,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -353,7 +354,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -362,6 +446,7 @@ CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -469,6 +554,15 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -563,6 +657,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
@@ -648,6 +743,11 @@ CONFIG_WATCHDOG=y
CONFIG_83xx_WDT=y
#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
@@ -664,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -686,6 +787,14 @@ CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -715,8 +824,55 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_R8A66597_HCD is not set
#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -792,6 +948,7 @@ CONFIG_TMPFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
@@ -862,6 +1019,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 558b0d348d4..fca114252ac 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:05:14 2008
+# Thu Mar 27 13:56:21 2008
#
# CONFIG_PPC64 is not set
@@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -272,7 +270,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
@@ -1895,6 +1893,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
new file mode 100644
index 00000000000..9d0140e3838
--- /dev/null
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -0,0 +1,896 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc9
+# Tue Apr 15 08:46:44 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EP405=y
+CONFIG_KILAUEA=y
+CONFIG_MAKALU=y
+CONFIG_WALNUT=y
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+CONFIG_405GP=y
+CONFIG_405EX=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_OF_RTC=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 57bd775ef77..12f9b5a8022 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:57:35 2008
+# Linux kernel version: 2.6.25-rc6
+# Sat Apr 5 09:35:48 2008
#
# CONFIG_PPC64 is not set
@@ -79,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +114,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -143,7 +145,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
@@ -161,12 +162,15 @@ CONFIG_TAISHAN=y
CONFIG_KATMAI=y
CONFIG_RAINIER=y
CONFIG_WARP=y
+CONFIG_CANYONLANDS=y
+CONFIG_YOSEMITE=y
CONFIG_440EP=y
CONFIG_440EPX=y
CONFIG_440GRX=y
CONFIG_440GP=y
CONFIG_440GX=y
CONFIG_440SPe=y
+CONFIG_460EX=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -199,7 +203,6 @@ CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
@@ -232,6 +235,7 @@ CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -678,6 +682,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -805,6 +810,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 880ab7ad10c..970282b1a00 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:06:28 2008
+# Thu Mar 27 13:56:24 2008
#
CONFIG_PPC64=y
@@ -84,8 +84,6 @@ CONFIG_CGROUPS=y
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
@@ -289,6 +287,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -335,7 +334,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
@@ -1881,6 +1880,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 755aca72b52..3e2593c60b1 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:08:01 2008
+# Thu Mar 27 13:56:28 2008
#
CONFIG_PPC64=y
@@ -83,8 +83,6 @@ CONFIG_CGROUPS=y
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
@@ -237,6 +235,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
@@ -283,7 +282,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
@@ -1519,6 +1518,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
new file mode 100644
index 00000000000..3180125aa6c
--- /dev/null
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -0,0 +1,1342 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Thu Apr 10 18:03:25 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPC8641_HPCN is not set
+CONFIG_SBC8641D=y
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b9dbfff9afe..ce1e8d24e74 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 4b749c41646..292c6d8db0e 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -26,8 +26,6 @@
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
-#else
-#include <linux/ptrace.h>
#endif
#include <asm/io.h>
@@ -46,6 +44,9 @@
#include <asm/mmu.h>
#include <asm/hvcall.h>
#endif
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/iseries/alpaca.h>
+#endif
#define DEFINE(sym, val) \
asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -60,7 +61,6 @@ int main(void)
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
#else
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
- DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
#endif /* CONFIG_PPC64 */
DEFINE(KSP, offsetof(struct thread_struct, ksp));
@@ -80,7 +80,6 @@ int main(void)
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
- DEFINE(PT_PTRACED, PT_PTRACED);
#endif
#ifdef CONFIG_SPE
DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
@@ -325,6 +324,9 @@ int main(void)
DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET));
DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START));
DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START));
+
+ /* alpaca */
+ DEFINE(ALPACA_SIZE, sizeof(struct alpaca));
#endif
DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 80e2eef05b2..9f937774549 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,6 +7,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/lmb.h>
#include <asm/sections.h>
#include <asm/prom.h>
@@ -15,7 +16,7 @@
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 6250443ab9c..5465e8de0e6 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -3,7 +3,7 @@
* Valentine Barshak <vbarshak@ru.mvista.com>
* MontaVista Software, Inc (c) 2007
*
- * Based on cpu_setup_6xx code by
+ * Based on cpu_setup_6xx code by
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or
@@ -32,6 +32,9 @@ _GLOBAL(__setup_cpu_440grx)
bl __fixup_440A_mcheck
mtlr r4
blr
+_GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
+ b __init_fpu_44x
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a8f5cc5184..26ffb44e270 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -36,6 +36,8 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -1397,6 +1399,30 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460EX */
+ .pvr_mask = 0xffff0002,
+ .pvr_value = 0x13020002,
+ .cpu_name = "460EX",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460ex,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
+ { /* 460GT */
+ .pvr_mask = 0xffff0002,
+ .pvr_value = 0x13020000,
+ .cpu_name = "460GT",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460gt,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
#endif /* CONFIG_44x */
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_E200
@@ -1512,7 +1538,7 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
*t = *s;
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
#if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
- /* ppc64 and booke expect identify_cpu to also call
+ /* ppc64 and booke expect identify_cpu to also call
* setup_cpu for that processor. I will consolidate
* that at a later time, for now, just use #ifdef.
* we also don't need to PTRRELOC the function pointer
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 571132ed12c..eae401de3f7 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,12 +24,13 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/kexec.h>
#include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/smp.h>
#include <asm/system.h>
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 29ff77c468a..9ee3c5278db 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,8 +13,9 @@
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/uaccess.h>
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 69a91bd4611..84c86863306 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -110,9 +110,9 @@ transfer_to_handler:
stw r11,PT_REGS(r12)
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
/* Check to see if the dbcr0 register is set up to debug. Use the
- single-step bit to do this. */
+ internal debug mode bit to do this. */
lwz r12,THREAD_DBCR0(r12)
- andis. r12,r12,DBCR0_IC@h
+ andis. r12,r12,DBCR0_IDM@h
beq+ 3f
/* From user and task is ptraced - load up global dbcr0 */
li r12,-1 /* clear all pending debug events */
@@ -120,6 +120,12 @@ transfer_to_handler:
lis r11,global_dbcr0@ha
tophys(r11,r11)
addi r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+ rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ lwz r9,TI_CPU(r9)
+ slwi r9,r9,3
+ add r11,r11,r9
+#endif
lwz r12,0(r11)
mtspr SPRN_DBCR0,r12
lwz r12,4(r11)
@@ -238,10 +244,10 @@ ret_from_syscall:
stw r11,_CCR(r1)
syscall_exit_cont:
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
- /* If the process has its own DBCR0 value, load it up. The single
- step bit tells us that dbcr0 should be loaded. */
+ /* If the process has its own DBCR0 value, load it up. The internal
+ debug mode bit tells us that dbcr0 should be loaded. */
lwz r0,THREAD+THREAD_DBCR0(r2)
- andis. r10,r0,DBCR0_IC@h
+ andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
#ifdef CONFIG_44x
@@ -666,10 +672,10 @@ user_exc_return: /* r10 contains MSR_KERNEL here */
restore_user:
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
- /* Check whether this process has its own DBCR0 value. The single
- step bit tells us that dbcr0 should be loaded. */
+ /* Check whether this process has its own DBCR0 value. The internal
+ debug mode bit tells us that dbcr0 should be loaded. */
lwz r0,THREAD+THREAD_DBCR0(r2)
- andis. r10,r0,DBCR0_IC@h
+ andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
@@ -879,6 +885,12 @@ load_dbcr0:
mfspr r10,SPRN_DBCR0
lis r11,global_dbcr0@ha
addi r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+ rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
+ lwz r9,TI_CPU(r9)
+ slwi r9,r9,3
+ add r11,r11,r9
+#endif
stw r10,0(r11)
mtspr SPRN_DBCR0,r0
lwz r10,4(r11)
@@ -891,7 +903,7 @@ load_dbcr0:
.section .bss
.align 4
global_dbcr0:
- .space 8
+ .space 8*NR_CPUS
.previous
#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 148a3547c9a..c0db5b769e5 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -29,6 +29,8 @@
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
+#include <asm/ptrace.h>
+#include <asm/irqflags.h>
/*
* System calls.
@@ -39,7 +41,7 @@
/* This value is used to mark exception frames on the stack. */
exception_marker:
- .tc ID_72656773_68657265[TC],0x7265677368657265
+ .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
.section ".text"
.align 7
@@ -88,6 +90,14 @@ system_call_common:
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl .trace_hardirqs_on
+ REST_GPR(0,r1)
+ REST_4GPRS(3,r1)
+ REST_2GPRS(7,r1)
+ addi r9,r1,STACK_FRAME_OVERHEAD
+ ld r12,_MSR(r1)
+#endif /* CONFIG_TRACE_IRQFLAGS */
li r10,1
stb r10,PACASOFTIRQEN(r13)
stb r10,PACAHARDIRQEN(r13)
@@ -102,7 +112,7 @@ BEGIN_FW_FTR_SECTION
b hardware_interrupt_entry
2:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
+#endif /* CONFIG_PPC_ISERIES */
mfmsr r11
ori r11,r11,MSR_EE
mtmsrd r11,1
@@ -504,6 +514,10 @@ BEGIN_FW_FTR_SECTION
li r3,0
stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl .trace_hardirqs_off
+ mfmsr r10
+#endif
ori r10,r10,MSR_EE
mtmsrd r10 /* hard-enable again */
addi r3,r1,STACK_FRAME_OVERHEAD
@@ -512,7 +526,7 @@ BEGIN_FW_FTR_SECTION
4:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
- stb r5,PACASOFTIRQEN(r13)
+ TRACE_AND_RESTORE_IRQ(r5);
/* extract EE bit and use it to restore paca->hard_enabled */
ld r3,_MSR(r1)
@@ -580,6 +594,16 @@ do_work:
bne restore
/* here we are preempting the current task */
1:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl .trace_hardirqs_on
+ /* Note: we just clobbered r10 which used to contain the previous
+ * MSR before the hard-disabling done by the caller of do_work.
+ * We don't have that value anymore, but it doesn't matter as
+ * we will hard-enable unconditionally, we can just reload the
+ * current MSR into r10
+ */
+ mfmsr r10
+#endif /* CONFIG_TRACE_IRQFLAGS */
li r0,1
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 0f4fac51202..785af9b5659 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -30,6 +30,7 @@
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
@@ -268,8 +269,8 @@ __secondary_hold_acknowledge:
li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
MTMSRD(r10); /* (except for mach check in rtas) */ \
stw r0,GPR0(r11); \
- lis r10,0x7265; /* put exception frame marker */ \
- addi r10,r10,0x6773; \
+ lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
+ addi r10,r10,STACK_FRAME_REGS_MARKER@l; \
stw r10,8(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
@@ -763,23 +764,6 @@ load_up_altivec:
b fast_exception_return
/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
-/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
* and save the AltiVec registers in its thread_struct.
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index ad071a146a8..b84ec6a2fc9 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -211,7 +211,7 @@ skpinv: addi r4,r4,1 /* Increment */
SET_IVOR(12, WatchdogTimer);
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
- SET_IVOR(15, Debug);
+ SET_IVOR(15, DebugCrit);
/* Establish the interrupt vector base */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
@@ -578,7 +578,7 @@ interrupt_base:
b InstructionStorage
/* Debug Interrupt */
- DEBUG_EXCEPTION
+ DEBUG_CRIT_EXCEPTION
/*
* Local functions
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d3aee08e681..215973a2c8d 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -36,8 +36,7 @@
#include <asm/firmware.h>
#include <asm/page_64.h>
#include <asm/exception.h>
-
-#define DO_SOFT_DISABLE
+#include <asm/irqflags.h>
/*
* We layout physical memory as follows:
@@ -450,8 +449,8 @@ bad_stack:
*/
fast_exc_return_irq: /* restores irq state too */
ld r3,SOFTE(r1)
+ TRACE_AND_RESTORE_IRQ(r3);
ld r12,_MSR(r1)
- stb r3,PACASOFTIRQEN(r13) /* restore paca->soft_enabled */
rldicl r4,r12,49,63 /* get MSR_EE to LSB */
stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
b 1f
@@ -621,7 +620,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
mtlr r10
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_slb
+ beq- 2f
.machine push
.machine "power4"
@@ -643,6 +642,22 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
rfid
b . /* prevent speculative execution */
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ b unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+ mfspr r11,SPRN_SRR0
+ clrrdi r10,r13,32
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ mfmsr r10
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
unrecov_slb:
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
DISABLE_INTS
@@ -808,7 +823,7 @@ _STATIC(load_up_altivec)
* Hash table stuff
*/
.align 7
-_GLOBAL(do_hash_page)
+_STATIC(do_hash_page)
std r3,_DAR(r1)
std r4,_DSISR(r1)
@@ -820,6 +835,27 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
/*
+ * On iSeries, we soft-disable interrupts here, then
+ * hard-enable interrupts so that the hash_page code can spin on
+ * the hash_table_lock without problems on a shared processor.
+ */
+ DISABLE_INTS
+
+ /*
+ * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
+ * and will clobber volatile registers when irq tracing is enabled
+ * so we need to reload them. It may be possible to be smarter here
+ * and move the irq tracing elsewhere but let's keep it simple for
+ * now
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ ld r3,_DAR(r1)
+ ld r4,_DSISR(r1)
+ ld r5,_TRAP(r1)
+ ld r12,_MSR(r1)
+ clrrdi r5,r5,4
+#endif /* CONFIG_TRACE_IRQFLAGS */
+ /*
* We need to set the _PAGE_USER bit if MSR_PR is set or if we are
* accessing a userspace segment (even from the kernel). We assume
* kernel addresses always have the high bit set.
@@ -832,13 +868,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
/*
- * On iSeries, we soft-disable interrupts here, then
- * hard-enable interrupts so that the hash_page code can spin on
- * the hash_table_lock without problems on a shared processor.
- */
- DISABLE_INTS
-
- /*
* r3 contains the faulting address
* r4 contains the required access permissions
* r5 contains the trap number
@@ -848,7 +877,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
bl .hash_page /* build HPTE if possible */
cmpdi r3,0 /* see if hash_page succeeded */
-#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
/*
* If we had interrupts soft-enabled at the point where the
@@ -860,7 +888,7 @@ BEGIN_FW_FTR_SECTION
*/
beq 13f
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
+
BEGIN_FW_FTR_SECTION
/*
* Here we have interrupts hard-disabled, so it is sufficient
@@ -874,11 +902,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/*
* hash_page couldn't handle it, set soft interrupt enable back
- * to what it was before the trap. Note that .local_irq_restore
+ * to what it was before the trap. Note that .raw_local_irq_restore
* handles any interrupts pending at this point.
*/
ld r3,SOFTE(r1)
- bl .local_irq_restore
+ TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
+ bl .raw_local_irq_restore
b 11f
/* Here we have a page fault that hash_page can't handle. */
@@ -1477,6 +1506,10 @@ _INIT_STATIC(start_here_multiplatform)
addi r2,r2,0x4000
add r2,r2,r26
+ /* Set initial ptr to current */
+ LOAD_REG_IMMEDIATE(r4, init_task)
+ std r4,PACACURRENT(r13)
+
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
@@ -1505,10 +1538,6 @@ _INIT_GLOBAL(start_here_common)
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- /* ptr to current */
- LOAD_REG_IMMEDIATE(r4, init_task)
- std r4,PACACURRENT(r13)
-
/* Load the TOC */
ld r2,PACATOC(r13)
std r1,PACAKSAVE(r13)
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index ba9393f8e77..aefafc6330c 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -56,8 +56,17 @@
* is necessary since the MMU is always on, for Book-E parts, and the stacks
* are offset from KERNELBASE.
*
+ * There is some space optimization to be had here if desired. However
+ * to allow for a common kernel with support for debug exceptions either
+ * going to critical or their own debug level we aren't currently
+ * providing configurations that micro-optimize space usage.
*/
-#define BOOKE_EXCEPTION_STACK_SIZE (8192)
+#ifdef CONFIG_44x
+#define NUM_EXCEPTION_LVLS 2
+#else
+#define NUM_EXCEPTION_LVLS 3
+#endif
+#define BOOKE_EXCEPTION_STACK_SIZE (4096 * NUM_EXCEPTION_LVLS)
/* CRIT_SPRG only used in critical exception handling */
#define CRIT_SPRG SPRN_SPRG2
@@ -68,7 +77,7 @@
#define CRIT_STACK_TOP (exception_stack_top)
/* only on e200 for now */
-#define DEBUG_STACK_TOP (exception_stack_top - 4096)
+#define DEBUG_STACK_TOP (exception_stack_top - 8192)
#define DEBUG_SPRG SPRN_SPRG6W
#ifdef CONFIG_SMP
@@ -212,9 +221,8 @@ label:
* save (and later restore) the MSR via SPRN_CSRR1, which will still have
* the MSR_DE bit set.
*/
-#ifdef CONFIG_E200
-#define DEBUG_EXCEPTION \
- START_EXCEPTION(Debug); \
+#define DEBUG_DEBUG_EXCEPTION \
+ START_EXCEPTION(DebugDebug); \
DEBUG_EXCEPTION_PROLOG; \
\
/* \
@@ -234,8 +242,8 @@ label:
cmplw r12,r10; \
blt+ 2f; /* addr below exception vectors */ \
\
- lis r10,Debug@h; \
- ori r10,r10,Debug@l; \
+ lis r10,DebugDebug@h; \
+ ori r10,r10,DebugDebug@l; \
cmplw r12,r10; \
bgt+ 2f; /* addr above exception vectors */ \
\
@@ -265,9 +273,9 @@ label:
2: mfspr r4,SPRN_DBSR; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
-#else
-#define DEBUG_EXCEPTION \
- START_EXCEPTION(Debug); \
+
+#define DEBUG_CRIT_EXCEPTION \
+ START_EXCEPTION(DebugCrit); \
CRITICAL_EXCEPTION_PROLOG; \
\
/* \
@@ -287,8 +295,8 @@ label:
cmplw r12,r10; \
blt+ 2f; /* addr below exception vectors */ \
\
- lis r10,Debug@h; \
- ori r10,r10,Debug@l; \
+ lis r10,DebugCrit@h; \
+ ori r10,r10,DebugCrit@l; \
cmplw r12,r10; \
bgt+ 2f; /* addr above exception vectors */ \
\
@@ -318,7 +326,6 @@ label:
2: mfspr r4,SPRN_DBSR; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-#endif
#define INSTRUCTION_STORAGE_EXCEPTION \
START_EXCEPTION(InstructionStorage) \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index d9cc2c288d9..4ff74414356 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -68,7 +68,9 @@ _ENTRY(_start);
mr r29,r5
mr r28,r6
mr r27,r7
+ li r25,0 /* phys kernel start (low) */
li r24,0 /* CPU number */
+ li r23,0 /* phys kernel start (high) */
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
@@ -167,7 +169,28 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_MAS0,r7
tlbre
- /* Just modify the entry ID, EPN and RPN for the temp mapping */
+ /* grab and fixup the RPN */
+ mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
+ rlwinm r6,r6,25,27,30
+ li r8,-1
+ addi r6,r6,10
+ slw r6,r8,r6 /* convert to mask */
+
+ bl 1f /* Find our address */
+1: mflr r7
+
+ mfspr r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+ mfspr r23,SPRN_MAS7
+#endif
+ and r8,r6,r8
+ subfic r9,r6,-4096
+ and r9,r9,r7
+
+ or r25,r8,r9
+ ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+ /* Just modify the entry ID and EPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
@@ -177,12 +200,10 @@ skpinv: addi r6,r6,1 /* Increment */
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
- lis r7,PHYSICAL_START@h
+ li r7,0 /* temp EPN = 0 */
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS2,r7
- mfspr r6,SPRN_MAS3
- rlwimi r7,r6,0,20,31
- mtspr SPRN_MAS3,r7
+ mtspr SPRN_MAS3,r8
tlbwe
xori r6,r4,1
@@ -232,8 +253,7 @@ skpinv: addi r6,r6,1 /* Increment */
ori r6,r6,PAGE_OFFSET@l
rlwimi r6,r7,0,20,31
mtspr SPRN_MAS2,r6
- li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
- mtspr SPRN_MAS3,r7
+ mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
@@ -283,7 +303,10 @@ skpinv: addi r6,r6,1 /* Increment */
SET_IVOR(12, WatchdogTimer);
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
- SET_IVOR(15, Debug);
+ SET_IVOR(15, DebugDebug);
+#if defined(CONFIG_E500)
+ SET_IVOR(15, DebugCrit);
+#endif
SET_IVOR(32, SPEUnavailable);
SET_IVOR(33, SPEFloatingPointData);
SET_IVOR(34, SPEFloatingPointRound);
@@ -718,7 +741,10 @@ interrupt_base:
/* Debug Interrupt */
- DEBUG_EXCEPTION
+ DEBUG_DEBUG_EXCEPTION
+#if defined(CONFIG_E500)
+ DEBUG_CRIT_EXCEPTION
+#endif
/*
* Local functions
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 2f50bb5d00f..9971159c804 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -183,7 +183,7 @@ static int ibmebus_create_devices(const struct of_device_id *matches)
ret = ibmebus_create_device(child);
if (ret) {
printk(KERN_ERR "%s: failed to create device (%i)",
- __FUNCTION__, ret);
+ __func__, ret);
of_node_put(child);
break;
}
@@ -269,7 +269,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus,
if (bus_find_device(&ibmebus_bus_type, NULL, path,
ibmebus_match_path)) {
printk(KERN_WARNING "%s: %s has already been probed\n",
- __FUNCTION__, path);
+ __func__, path);
rc = -EEXIST;
goto out;
}
@@ -279,7 +279,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus,
of_node_put(dn);
} else {
printk(KERN_WARNING "%s: no such device node: %s\n",
- __FUNCTION__, path);
+ __func__, path);
rc = -ENODEV;
}
@@ -308,7 +308,7 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus,
return count;
} else {
printk(KERN_WARNING "%s: %s not on the bus\n",
- __FUNCTION__, path);
+ __func__, path);
kfree(path);
return -ENODEV;
@@ -337,14 +337,14 @@ static int __init ibmebus_bus_init(void)
err = of_bus_type_init(&ibmebus_bus_type, "ibmebus");
if (err) {
printk(KERN_ERR "%s: failed to register IBM eBus.\n",
- __FUNCTION__);
+ __func__);
return err;
}
err = device_register(&ibmebus_bus_device);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
- __FUNCTION__, err);
+ __func__, err);
bus_unregister(&ibmebus_bus_type);
return err;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8f1f4e539c4..0c663669bc3 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -520,7 +520,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
unsigned int order;
if (!tbl || !tbl->it_map) {
- printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: expected TCE map for %s\n", __func__,
node_name);
return;
}
@@ -530,7 +530,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
for (i = 0; i < (tbl->it_size/64); i++) {
if (tbl->it_map[i] != 0) {
printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
- __FUNCTION__, node_name);
+ __func__, node_name);
break;
}
}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 292163f5b39..425616f92d1 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -114,7 +114,7 @@ static inline void set_soft_enabled(unsigned long enable)
: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
}
-void local_irq_restore(unsigned long en)
+void raw_local_irq_restore(unsigned long en)
{
/*
* get_paca()->soft_enabled = en;
@@ -174,6 +174,7 @@ void local_irq_restore(unsigned long en)
__hard_irq_enable();
}
+EXPORT_SYMBOL(raw_local_irq_restore);
#endif /* CONFIG_PPC64 */
int show_interrupts(struct seq_file *p, void *v)
@@ -310,8 +311,21 @@ void do_IRQ(struct pt_regs *regs)
handler = &__do_IRQ;
irqtp->task = curtp->task;
irqtp->flags = 0;
+
+ /* Copy the softirq bits in preempt_count so that the
+ * softirq checks work in the hardirq context.
+ */
+ irqtp->preempt_count =
+ (irqtp->preempt_count & ~SOFTIRQ_MASK) |
+ (curtp->preempt_count & SOFTIRQ_MASK);
+
call_handle_irq(irq, desc, irqtp, handler);
irqtp->task = NULL;
+
+
+ /* Set any flag that may have been set on the
+ * alternate stack
+ */
if (irqtp->flags)
set_bits(irqtp->flags, &curtp->flags);
} else
@@ -357,7 +371,7 @@ void irq_ctx_init(void)
memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
tp = softirq_ctx[i];
tp->cpu = i;
- tp->preempt_count = SOFTIRQ_OFFSET;
+ tp->preempt_count = 0;
memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
tp = hardirq_ctx[i];
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index ee172aa42aa..289af348978 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -80,13 +80,13 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
* (size depending on dev->n_addr_cells)
* cell 5: the size of the range
*/
- if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) {
+ if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) {
range++;
rlen -= sizeof(struct isa_range);
if (rlen < sizeof(struct isa_range))
goto inval_range;
}
- if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO)
+ if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO)
goto inval_range;
isa_addr = range->isa_addr.a_lo;
@@ -99,7 +99,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
*/
if ((pci_addr != 0) || (isa_addr != 0)) {
printk(KERN_ERR "unexpected isa to pci mapping: %s\n",
- __FUNCTION__);
+ __func__);
return;
}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index dcb89a88df4..1ffacc698ff 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -226,7 +226,7 @@ static void parse_system_parameter_string(struct seq_file *m)
unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!local_buffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
- __FILE__, __FUNCTION__, __LINE__);
+ __FILE__, __func__, __LINE__);
return;
}
@@ -243,14 +243,14 @@ static void parse_system_parameter_string(struct seq_file *m)
if (call_status != 0) {
printk(KERN_INFO
"%s %s Error calling get-system-parameter (0x%x)\n",
- __FILE__, __FUNCTION__, call_status);
+ __FILE__, __func__, call_status);
} else {
int splpar_strlen;
int idx, w_idx;
char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!workbuffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
- __FILE__, __FUNCTION__, __LINE__);
+ __FILE__, __func__, __LINE__);
kfree(local_buffer);
return;
}
@@ -484,10 +484,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
current_weight = (resource >> 5 * 8) & 0xFF;
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
- __FUNCTION__, current_entitled, current_weight);
+ __func__, current_entitled, current_weight);
pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
- __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+ __func__, *new_entitled_ptr, *new_weight_ptr);
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
*new_weight_ptr);
@@ -502,7 +502,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
retval = -EINVAL;
} else {
printk(KERN_WARNING "%s: received unknown hv return code %ld",
- __FUNCTION__, retval);
+ __func__, retval);
retval = -EIO;
}
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index c0c8e8c3ced..2d202f274e7 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,8 +12,9 @@
#include <linux/kexec.h>
#include <linux/reboot.h>
#include <linux/threads.h>
+#include <linux/lmb.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
void machine_crash_shutdown(struct pt_regs *regs)
{
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 55f1a25085c..ac163bd46cf 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -15,7 +15,6 @@
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/mmu.h>
@@ -25,13 +24,13 @@
extern unsigned long __toc_start;
/*
- * iSeries structure which the hypervisor knows about - this structure
+ * The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
* is now known to fail if the lppaca structure crosses a page
- * boundary. The lppaca is also used on POWER5 pSeries boxes. The
- * lppaca is 640 bytes long, and cannot readily change since the
- * hypervisor knows its layout, so a 1kB alignment will suffice to
- * ensure that it doesn't cross a page boundary.
+ * boundary. The lppaca is also used on legacy iSeries and POWER5
+ * pSeries boxes. The lppaca is 640 bytes long, and cannot readily
+ * change since the hypervisor knows its layout, so a 1kB alignment
+ * will suffice to ensure that it doesn't cross a page boundary.
*/
struct lppaca lppaca[] = {
[0 ... (NR_CPUS-1)] = {
@@ -66,32 +65,17 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
-#define PACA_INIT_COMMON(number) \
+#define PACA_INIT(number) \
+{ \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
.hw_cpu_id = 0xffff, \
- .slb_shadow_ptr = &slb_shadow[number],
-
-#ifdef CONFIG_PPC_ISERIES
-#define PACA_INIT_ISERIES(number) \
- .reg_save_ptr = &iseries_reg_save[number],
-
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number) \
- PACA_INIT_ISERIES(number) \
+ .slb_shadow_ptr = &slb_shadow[number], \
+ .__current = &init_task, \
}
-#else
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number) \
-}
-
-#endif
-
struct paca_struct paca[] = {
PACA_INIT(0),
#if NR_CPUS > 1
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
index 90e56277179..fda05e2211d 100644
--- a/arch/powerpc/kernel/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -135,4 +135,6 @@ struct ucontext32 {
struct mcontext32 uc_mcontext;
};
+extern int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s);
+
#endif /* _PPC64_PPC32_H */
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 65d14e6ddc3..09fcb50c45a 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -44,10 +44,6 @@
#include <asm/signal.h>
#include <asm/dcr.h>
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(local_irq_restore);
-#endif
-
#ifdef CONFIG_PPC32
extern void transfer_to_handler(void);
extern void do_IRQ(struct pt_regs *regs);
@@ -57,7 +53,6 @@ extern void program_check_exception(struct pt_regs *regs);
extern void single_step_exception(struct pt_regs *regs);
extern int sys_sigreturn(struct pt_regs *regs);
-EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
@@ -78,6 +73,7 @@ EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
@@ -191,3 +187,4 @@ EXPORT_SYMBOL(intercept_table);
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
+EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4ec60552150..703100d5e45 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -868,11 +868,6 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
flush_spe_to_thread(current);
error = do_execve(filename, (char __user * __user *) a1,
(char __user * __user *) a2, regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
out:
return error;
@@ -919,20 +914,6 @@ int validate_sp(unsigned long sp, struct task_struct *p,
return valid_irq_stack(sp, p, nbytes);
}
-#ifdef CONFIG_PPC64
-#define MIN_STACK_FRAME 112 /* same as STACK_FRAME_OVERHEAD, in fact */
-#define FRAME_LR_SAVE 2
-#define INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD + 288)
-#define REGS_MARKER 0x7265677368657265ul
-#define FRAME_MARKER 12
-#else
-#define MIN_STACK_FRAME 16
-#define FRAME_LR_SAVE 1
-#define INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
-#define REGS_MARKER 0x72656773ul
-#define FRAME_MARKER 2
-#endif
-
EXPORT_SYMBOL(validate_sp);
unsigned long get_wchan(struct task_struct *p)
@@ -944,15 +925,15 @@ unsigned long get_wchan(struct task_struct *p)
return 0;
sp = p->thread.ksp;
- if (!validate_sp(sp, p, MIN_STACK_FRAME))
+ if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD))
return 0;
do {
sp = *(unsigned long *)sp;
- if (!validate_sp(sp, p, MIN_STACK_FRAME))
+ if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD))
return 0;
if (count > 0) {
- ip = ((unsigned long *)sp)[FRAME_LR_SAVE];
+ ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
if (!in_sched_functions(ip))
return ip;
}
@@ -981,12 +962,12 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
lr = 0;
printk("Call Trace:\n");
do {
- if (!validate_sp(sp, tsk, MIN_STACK_FRAME))
+ if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
return;
stack = (unsigned long *) sp;
newsp = stack[0];
- ip = stack[FRAME_LR_SAVE];
+ ip = stack[STACK_FRAME_LR_SAVE];
if (!firstframe || ip != lr) {
printk("["REG"] ["REG"] ", sp, ip);
print_symbol("%s", ip);
@@ -1000,8 +981,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
* See if this is an exception frame.
* We look for the "regshere" marker in the current frame.
*/
- if (validate_sp(sp, tsk, INT_FRAME_SIZE)
- && stack[FRAME_MARKER] == REGS_MARKER) {
+ if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE)
+ && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
struct pt_regs *regs = (struct pt_regs *)
(sp + STACK_FRAME_OVERHEAD);
printk("--- Exception: %lx", regs->trap);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index eac97f48b9b..3bfe7837e82 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,10 +31,10 @@
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/rtas.h>
-#include <asm/lmb.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/irq.h>
@@ -51,6 +51,7 @@
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
#include <asm/kexec.h>
#ifdef DEBUG
@@ -436,7 +437,7 @@ early_param("mem", early_parse_mem);
* The device tree may be allocated beyond our memory limit, or inside the
* crash kernel region for kdump. If so, move it out of the way.
*/
-static void move_device_tree(void)
+static void __init move_device_tree(void)
{
unsigned long start, size;
void *p;
@@ -1040,6 +1041,87 @@ static void __init early_reserve_mem(void)
#endif
}
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+ unsigned long tmp;
+
+ if (phyp_dump_info->reserve_bootvar)
+ return phyp_dump_info->reserve_bootvar;
+
+ /* divide by 20 to get 5% of value */
+ tmp = lmb_end_of_DRAM();
+ do_div(tmp, 20);
+
+ /* round it down in multiples of 256 */
+ tmp = tmp & ~0x0FFFFFFFUL;
+
+ return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+ unsigned long base, size;
+ unsigned long variable_reserve_size;
+
+ if (!phyp_dump_info->phyp_dump_configured) {
+ printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+ return;
+ }
+
+ if (!phyp_dump_info->phyp_dump_at_boot) {
+ printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+ return;
+ }
+
+ variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+ if (phyp_dump_info->phyp_dump_is_active) {
+ /* Reserve *everything* above RMR.Area freed by userland tools*/
+ base = variable_reserve_size;
+ size = lmb_end_of_DRAM() - base;
+
+ /* XXX crashed_ram_end is wrong, since it may be beyond
+ * the memory_limit, it will need to be adjusted. */
+ lmb_reserve(base, size);
+
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ } else {
+ size = phyp_dump_info->cpu_state_size +
+ phyp_dump_info->hpte_region_size +
+ variable_reserve_size;
+ base = lmb_end_of_DRAM() - size;
+ lmb_reserve(base, size);
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ }
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
+
+
void __init early_init_devtree(void *params)
{
DBG(" -> early_init_devtree(%p)\n", params);
@@ -1052,6 +1134,11 @@ void __init early_init_devtree(void *params)
of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
#endif
+#ifdef CONFIG_PHYP_DUMP
+ /* scan tree to see if dump occured during last boot */
+ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
@@ -1072,6 +1159,7 @@ void __init early_init_devtree(void *params)
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
+ phyp_dump_reserve_mem();
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
@@ -1244,12 +1332,14 @@ EXPORT_SYMBOL(of_node_put);
*/
void of_attach_node(struct device_node *np)
{
- write_lock(&devtree_lock);
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
np->sibling = np->parent->child;
np->allnext = allnodes;
np->parent->child = np;
allnodes = np;
- write_unlock(&devtree_lock);
+ write_unlock_irqrestore(&devtree_lock, flags);
}
/*
@@ -1260,8 +1350,9 @@ void of_attach_node(struct device_node *np)
void of_detach_node(struct device_node *np)
{
struct device_node *parent;
+ unsigned long flags;
- write_lock(&devtree_lock);
+ write_lock_irqsave(&devtree_lock, flags);
parent = np->parent;
if (!parent)
@@ -1292,7 +1383,7 @@ void of_detach_node(struct device_node *np)
of_node_set_flag(np, OF_DETACHED);
out_unlock:
- write_unlock(&devtree_lock);
+ write_unlock_irqrestore(&devtree_lock, flags);
}
#ifdef CONFIG_PPC_PSERIES
@@ -1373,20 +1464,21 @@ __initcall(prom_reconfig_setup);
int prom_add_property(struct device_node* np, struct property* prop)
{
struct property **next;
+ unsigned long flags;
prop->next = NULL;
- write_lock(&devtree_lock);
+ write_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
if (strcmp(prop->name, (*next)->name) == 0) {
/* duplicate ! don't insert it */
- write_unlock(&devtree_lock);
+ write_unlock_irqrestore(&devtree_lock, flags);
return -1;
}
next = &(*next)->next;
}
*next = prop;
- write_unlock(&devtree_lock);
+ write_unlock_irqrestore(&devtree_lock, flags);
#ifdef CONFIG_PROC_DEVICETREE
/* try to add to proc as well if it was initialized */
@@ -1406,9 +1498,10 @@ int prom_add_property(struct device_node* np, struct property* prop)
int prom_remove_property(struct device_node *np, struct property *prop)
{
struct property **next;
+ unsigned long flags;
int found = 0;
- write_lock(&devtree_lock);
+ write_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
if (*next == prop) {
@@ -1421,7 +1514,7 @@ int prom_remove_property(struct device_node *np, struct property *prop)
}
next = &(*next)->next;
}
- write_unlock(&devtree_lock);
+ write_unlock_irqrestore(&devtree_lock, flags);
if (!found)
return -ENODEV;
@@ -1447,9 +1540,10 @@ int prom_update_property(struct device_node *np,
struct property *oldprop)
{
struct property **next;
+ unsigned long flags;
int found = 0;
- write_lock(&devtree_lock);
+ write_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
while (*next) {
if (*next == oldprop) {
@@ -1463,7 +1557,7 @@ int prom_update_property(struct device_node *np,
}
next = &(*next)->next;
}
- write_unlock(&devtree_lock);
+ write_unlock_irqrestore(&devtree_lock, flags);
if (!found)
return -ENODEV;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5ab4c8466cc..6d6df1e6032 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2240,6 +2240,14 @@ static void __init fixup_device_tree_efika(void)
if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
+ /* CODEGEN,description is exposed in /proc/cpuinfo so
+ fix that too */
+ rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
+ if (rv != PROM_ERROR && (strstr(prop, "CHRP")))
+ prom_setprop(node, "/", "CODEGEN,description",
+ "Efika 5200B PowerPC System",
+ sizeof("Efika 5200B PowerPC System"));
+
/* Fixup bestcomm interrupts property */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
if (PHANDLE_VALID(node)) {
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 4c1de6af4c0..9d30e10970a 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -29,12 +29,15 @@
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/compat.h>
+#include <linux/elf.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
+#include "ppc32.h"
+
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
@@ -64,6 +67,27 @@ static long compat_ptrace_old(struct task_struct *child, long request,
return -EPERM;
}
+static int compat_ptrace_getsiginfo(struct task_struct *child, compat_siginfo_t __user *data)
+{
+ siginfo_t lastinfo;
+ int error = -ESRCH;
+
+ read_lock(&tasklist_lock);
+ if (likely(child->sighand != NULL)) {
+ error = -EINVAL;
+ spin_lock_irq(&child->sighand->siglock);
+ if (likely(child->last_siginfo != NULL)) {
+ lastinfo = *child->last_siginfo;
+ error = 0;
+ }
+ spin_unlock_irq(&child->sighand->siglock);
+ }
+ read_unlock(&tasklist_lock);
+ if (!error)
+ return copy_siginfo_to_user32(data, &lastinfo);
+ return error;
+}
+
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t caddr, compat_ulong_t cdata)
{
@@ -282,6 +306,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
0, PT_REGS_COUNT * sizeof(compat_long_t),
compat_ptr(data));
+ case PTRACE_GETSIGINFO:
+ return compat_ptrace_getsiginfo(child, compat_ptr(data));
+
case PTRACE_GETFPREGS:
case PTRACE_SETFPREGS:
case PTRACE_GETVRREGS:
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index fe8d9514689..34843c31841 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,6 +22,7 @@
#include <linux/smp.h>
#include <linux/completion.h>
#include <linux/cpumask.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -33,7 +34,6 @@
#include <asm/system.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include <asm/syscalls.h>
#include <asm/smp.h>
@@ -506,7 +506,7 @@ int rtas_error_rc(int rtas_rc)
break;
default:
printk(KERN_ERR "%s: unexpected RTAS error %d\n",
- __FUNCTION__, rtas_rc);
+ __func__, rtas_rc);
rc = -ERANGE;
break;
}
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 538baf46f15..627f126d184 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -807,7 +807,7 @@ int __init rtas_flash_init(void)
rtas_block_ctor);
if (!flash_block_cache) {
printk(KERN_ERR "%s: failed to create block cache\n",
- __FUNCTION__);
+ __func__);
rc = -ENOMEM;
goto cleanup;
}
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 433a0a0949f..3ab88a9dc70 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -56,21 +56,6 @@ static inline int config_access_valid(struct pci_dn *dn, int where)
return 0;
}
-static int of_device_available(struct device_node * dn)
-{
- const char *status;
-
- status = of_get_property(dn, "status", NULL);
-
- if (!status)
- return 1;
-
- if (!strcmp(status, "okay"))
- return 1;
-
- return 0;
-}
-
int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
{
int returnval = -1;
@@ -117,7 +102,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
for (dn = busdn->child; dn; dn = dn->sibling) {
struct pci_dn *pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_available(dn))
+ && of_device_is_available(dn))
return rtas_read_config(pdn, where, size, val);
}
@@ -164,7 +149,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
for (dn = busdn->child; dn; dn = dn->sibling) {
struct pci_dn *pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_available(dn))
+ && of_device_is_available(dn))
return rtas_write_config(pdn, where, size, val);
}
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -326,7 +311,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
res = b->resource[0];
if (!res->flags) {
- printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
b->name);
return 1;
}
@@ -334,13 +319,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
rc = pcibios_unmap_io_space(b);
if (rc) {
printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
if (release_resource(res)) {
printk(KERN_ERR "%s: failed to release IO on bus %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
@@ -348,13 +333,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
res = b->resource[i];
if (!res->flags && i == 0) {
printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
if (res->flags && release_resource(res)) {
printk(KERN_ERR
"%s: failed to release IO %d on bus %s\n",
- __FUNCTION__, i, b->name);
+ __func__, i, b->name);
return 1;
}
}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 6adb5a1e98b..db540eab09f 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -34,6 +34,7 @@
#include <linux/serial_8250.h>
#include <linux/debugfs.h>
#include <linux/percpu.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
@@ -56,7 +57,6 @@
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/lmb.h>
#include <asm/xmon.h>
#include <asm/cputhreads.h>
@@ -167,6 +167,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
unsigned short min;
if (cpu_id == NR_CPUS) {
+ struct device_node *root;
+ const char *model = NULL;
#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
unsigned long bogosum = 0;
int i;
@@ -178,6 +180,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
if (ppc_md.name)
seq_printf(m, "platform\t: %s\n", ppc_md.name);
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ if (model)
+ seq_printf(m, "model\t\t: %s\n", model);
+ of_node_put(root);
+
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 06d918d94dd..36f6779c88d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -164,6 +164,18 @@ int __init ppc_setup_l2cr(char *str)
}
__setup("l2cr=", ppc_setup_l2cr);
+/* Checks "l3cr=xxxx" command-line option */
+int __init ppc_setup_l3cr(char *str)
+{
+ if (cpu_has_feature(CPU_FTR_L3CR)) {
+ unsigned long val = simple_strtoul(str, NULL, 0);
+ printk(KERN_INFO "l3cr set to %lx\n", val);
+ _set_L3CR(val); /* and enable it */
+ }
+ return 1;
+}
+__setup("l3cr=", ppc_setup_l3cr);
+
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
@@ -269,7 +281,7 @@ void __init setup_arch(char **cmdline_p)
if (ppc_md.panic)
setup_panic();
- init_mm.start_code = PAGE_OFFSET;
+ init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 3b1529c103e..31ada9fdfc5 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -33,6 +33,8 @@
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
+#include <linux/lockdep.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
@@ -55,7 +57,6 @@
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
@@ -178,6 +179,9 @@ void __init early_setup(unsigned long dt_ptr)
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
+ /* Initialize lockdep early or else spinlocks will blow */
+ lockdep_init();
+
DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
@@ -510,7 +514,7 @@ void __init setup_arch(char **cmdline_p)
if (ppc_md.panic)
setup_panic();
- init_mm.start_code = PAGE_OFFSET;
+ init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index d840bc772fd..ad6943468ee 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -621,6 +621,18 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s)
#define copy_siginfo_to_user copy_siginfo_to_user32
+int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
+{
+ memset(to, 0, sizeof *to);
+
+ if (copy_from_user(to, from, 3*sizeof(int)) ||
+ copy_from_user(to->_sifields._pad,
+ from->_sifields._pad, SI_PAD_SIZE32))
+ return -EFAULT;
+
+ return 0;
+}
+
/*
* Note: it is necessary to treat pid and sig as unsigned ints, with the
* corresponding cast to a signed int to insure that the proper conversion
@@ -634,9 +646,10 @@ long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo
int ret;
mm_segment_t old_fs = get_fs();
- if (copy_from_user (&info, uinfo, 3*sizeof(int)) ||
- copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32))
- return -EFAULT;
+ ret = copy_siginfo_from_user32(&info, uinfo);
+ if (unlikely(ret))
+ return ret;
+
set_fs (KERNEL_DS);
/* The __user pointer cast is valid becasuse of the set_fs() */
ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info);
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
new file mode 100644
index 00000000000..e3638eeaaae
--- /dev/null
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -0,0 +1,47 @@
+/*
+ * Stack trace utility
+ *
+ * Copyright 2008 Christoph Hellwig, IBM Corp.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+ unsigned long sp;
+
+ asm("mr %0,1" : "=r" (sp));
+
+ for (;;) {
+ unsigned long *stack = (unsigned long *) sp;
+ unsigned long newsp, ip;
+
+ if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+ return;
+
+ newsp = stack[0];
+ ip = stack[STACK_FRAME_LR_SAVE];
+
+ if (!trace->skip)
+ trace->entries[trace->nr_entries++] = ip;
+ else
+ trace->skip--;
+
+ if (trace->nr_entries >= trace->max_entries)
+ return;
+
+ sp = newsp;
+ }
+}
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index fee9ee2260b..709f8cb8bfc 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -367,11 +367,6 @@ long compat_sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
out:
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d3437c4c4a6..c21a626af67 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -21,13 +21,14 @@
#include <linux/elf.h>
#include <linux/security.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/sections.h>
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f98867252ee..b77f8af7ddd 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -139,7 +139,7 @@ static int vio_bus_remove(struct device *dev)
*/
int vio_register_driver(struct vio_driver *viodrv)
{
- printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
+ printk(KERN_DEBUG "%s: driver %s registering\n", __func__,
viodrv->driver.name);
/* fill in 'struct driver' fields */
@@ -184,7 +184,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
/* we need the 'device_type' property, in order to match with drivers */
if (of_node->type == NULL) {
printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
- __FUNCTION__,
+ __func__,
of_node->name ? of_node->name : "<unknown>");
return NULL;
}
@@ -192,7 +192,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
unit_address = of_get_property(of_node, "reg", NULL);
if (unit_address == NULL) {
printk(KERN_WARNING "%s: node %s missing 'reg'\n",
- __FUNCTION__,
+ __func__,
of_node->name ? of_node->name : "<unknown>");
return NULL;
}
@@ -227,7 +227,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
/* register with generic device framework */
if (device_register(&viodev->dev)) {
printk(KERN_ERR "%s: failed to register device %s\n",
- __FUNCTION__, viodev->dev.bus_id);
+ __func__, viodev->dev.bus_id);
/* XXX free TCE table */
kfree(viodev);
return NULL;
@@ -258,7 +258,7 @@ static int __init vio_bus_init(void)
err = device_register(&vio_bus_device.dev);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
- __FUNCTION__, err);
+ __func__, err);
return err;
}
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 0afb9e31d2a..0c3000bf8d7 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -1,11 +1,9 @@
#ifdef CONFIG_PPC64
-#include <asm/page.h>
#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
-#define PAGE_SIZE 4096
-#define KERNELBASE CONFIG_KERNEL_START
#define PROVIDE32(x) PROVIDE(x)
#endif
+#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
@@ -33,7 +31,7 @@ SECTIONS
*/
/* Text and gots */
- .text : {
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
*(.text.head)
_text = .;
@@ -58,7 +56,7 @@ SECTIONS
RODATA
/* Exception & bug tables */
- __ex_table : {
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
@@ -74,7 +72,7 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
__init_begin = .;
- .init.text : {
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
INIT_TEXT
_einittext = .;
@@ -83,11 +81,11 @@ SECTIONS
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
- .exit.text : {
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
EXIT_TEXT
}
- .init.data : {
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
__vtop_table_begin = .;
*(.vtop_fixup);
@@ -103,19 +101,19 @@ SECTIONS
}
. = ALIGN(16);
- .init.setup : {
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
- .initcall.init : {
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
- .con_initcall.init : {
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
@@ -124,14 +122,14 @@ SECTIONS
SECURITY_INIT
. = ALIGN(8);
- __ftr_fixup : {
+ __ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
#ifdef CONFIG_PPC64
. = ALIGN(8);
- __fw_ftr_fixup : {
+ __fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
__start___fw_ftr_fixup = .;
*(__fw_ftr_fixup)
__stop___fw_ftr_fixup = .;
@@ -139,14 +137,14 @@ SECTIONS
#endif
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(PAGE_SIZE);
- .init.ramfs : {
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
. = ALIGN(PAGE_SIZE);
- .data.percpu : {
+ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
__per_cpu_start = .;
*(.data.percpu)
*(.data.percpu.shared_aligned)
@@ -154,7 +152,7 @@ SECTIONS
}
. = ALIGN(8);
- .machine.desc : {
+ .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
__machine_desc_start = . ;
*(.machine.desc)
__machine_desc_end = . ;
@@ -172,25 +170,24 @@ SECTIONS
_sdata = .;
#ifdef CONFIG_PPC32
- .data :
- {
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.sdata)
*(.got.plt) *(.got)
}
#else
- .data : {
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.data.rel*)
*(.toc1)
*(.branch_lt)
}
- .opd : {
+ .opd : AT(ADDR(.opd) - LOAD_OFFSET) {
*(.opd)
}
- .got : {
+ .got : AT(ADDR(.got) - LOAD_OFFSET) {
__toc_start = .;
*(.got)
*(.toc)
@@ -207,26 +204,26 @@ SECTIONS
#else
. = ALIGN(16384);
#endif
- .data.init_task : {
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}
. = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
*(.data.page_aligned)
}
- .data.cacheline_aligned : {
+ .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
. = ALIGN(L1_CACHE_BYTES);
- .data.read_mostly : {
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
}
. = ALIGN(PAGE_SIZE);
- __data_nosave : {
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
__nosave_begin = .;
*(.data.nosave)
. = ALIGN(PAGE_SIZE);
@@ -237,7 +234,7 @@ SECTIONS
* And finally the bss
*/
- .bss : {
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.sbss) *(.scommon)
*(.dynbss)
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 22c3b4f53de..29b2941cada 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -54,7 +54,7 @@ static int grow(rh_info_t * info, int max_blocks)
new_blocks = max_blocks - info->max_blocks;
- block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
+ block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_ATOMIC);
if (block == NULL)
return -ENOMEM;
@@ -258,7 +258,7 @@ rh_info_t *rh_create(unsigned int alignment)
if ((alignment & (alignment - 1)) != 0)
return ERR_PTR(-EINVAL);
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kmalloc(sizeof(*info), GFP_ATOMIC);
if (info == NULL)
return ERR_PTR(-ENOMEM);
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index c4c622d8e6a..49eb1f1a2bb 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -75,6 +75,20 @@ _GLOBAL(strcmp)
beq 1b
blr
+_GLOBAL(strncmp)
+ PPC_LCMPI r5,0
+ beqlr
+ mtctr r5
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r5)
+ cmpwi 1,r3,0
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ beqlr 1
+ bdnzt eq,1b
+ blr
+
_GLOBAL(strlen)
addi r4,r3,-1
1: lbzu r0,1(r4)
diff --git a/arch/powerpc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c
index 41f0617f3d3..549baba5948 100644
--- a/arch/powerpc/math-emu/fabs.c
+++ b/arch/powerpc/math-emu/fabs.c
@@ -9,7 +9,7 @@ fabs(u32 *frD, u32 *frB)
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index fc8836488b6..7befbbf2c33 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -14,7 +14,7 @@ fadd(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
index 93025b6c8f3..2b346b38b48 100644
--- a/arch/powerpc/math-emu/fadds.c
+++ b/arch/powerpc/math-emu/fadds.c
@@ -15,7 +15,7 @@ fadds(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index 4efac394b4c..36d689044c6 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -15,7 +15,7 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+ printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
index b7e33176e61..53d93894f2a 100644
--- a/arch/powerpc/math-emu/fcmpu.c
+++ b/arch/powerpc/math-emu/fcmpu.c
@@ -14,7 +14,7 @@ fcmpu(u32 *ccr, int crfD, void *frA, void *frB)
long cmp;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+ printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
index 3b3c98b840c..fcd7a95e021 100644
--- a/arch/powerpc/math-emu/fctiw.c
+++ b/arch/powerpc/math-emu/fctiw.c
@@ -16,7 +16,7 @@ fctiw(u32 *frD, void *frB)
frD[1] = r;
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
index 7717eb6fcfb..1514d59e146 100644
--- a/arch/powerpc/math-emu/fctiwz.c
+++ b/arch/powerpc/math-emu/fctiwz.c
@@ -23,7 +23,7 @@ fctiwz(u32 *frD, void *frB)
__FPU_FPSCR = fpscr;
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index f2fba825b2d..18a20fe396b 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -14,7 +14,7 @@ fdiv(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
@@ -28,13 +28,13 @@ fdiv(void *frD, void *frA, void *frB)
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
ret |= EFLAG_VXZDZ;
#ifdef DEBUG
- printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
ret |= EFLAG_VXIDI;
#ifdef DEBUG
- printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index b971196e317..24feed689c3 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -15,7 +15,7 @@ fdivs(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
@@ -29,13 +29,13 @@ fdivs(void *frD, void *frA, void *frB)
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
ret |= EFLAG_VXZDZ;
#ifdef DEBUG
- printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
ret |= EFLAG_VXIDI;
#ifdef DEBUG
- printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index 0a1dbce793e..dedb465fdc6 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -16,7 +16,7 @@ fmadd(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index 0f70bba9445..6bbb56d5502 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -17,7 +17,7 @@ fmadds(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c
index 28df700c0c7..bd55384b819 100644
--- a/arch/powerpc/math-emu/fmr.c
+++ b/arch/powerpc/math-emu/fmr.c
@@ -9,7 +9,7 @@ fmr(u32 *frD, u32 *frB)
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index 203fd48a6fe..f311e2c7e67 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -16,7 +16,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 8ce68624c18..81a716d3ee2 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -17,7 +17,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 66c7e79aae2..2f3d32784a0 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -14,7 +14,7 @@ fmul(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 26bc4278271..962b5883f78 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -15,7 +15,7 @@ fmuls(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c
index c6b913d179e..a7d34f3d949 100644
--- a/arch/powerpc/math-emu/fnabs.c
+++ b/arch/powerpc/math-emu/fnabs.c
@@ -9,7 +9,7 @@ fnabs(u32 *frD, u32 *frB)
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c
index fe9a98deff6..1e988cd9c6c 100644
--- a/arch/powerpc/math-emu/fneg.c
+++ b/arch/powerpc/math-emu/fneg.c
@@ -9,7 +9,7 @@ fneg(u32 *frD, u32 *frB)
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 7f312276d92..8cf7827c4fb 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -16,7 +16,7 @@ fnmadd(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index 65454c9c70b..f1c4f0f0d80 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -17,7 +17,7 @@ fnmadds(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index f1ca7482b5f..98944e6e260 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -16,7 +16,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index 5c9a09a87dc..b20f4eb63fb 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -17,7 +17,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c
index ec11e46d20a..10ecbd08b79 100644
--- a/arch/powerpc/math-emu/fres.c
+++ b/arch/powerpc/math-emu/fres.c
@@ -6,7 +6,7 @@ int
fres(void *frD, void *frB)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p\n", __func__, frD, frB);
#endif
return -ENOSYS;
}
diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
index d879b2a3d0c..724ccbc0468 100644
--- a/arch/powerpc/math-emu/frsp.c
+++ b/arch/powerpc/math-emu/frsp.c
@@ -12,7 +12,7 @@ frsp(void *frD, void *frB)
FP_DECL_D(B);
#ifdef DEBUG
- printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c
index a11ae182985..1d0a3a0fd0e 100644
--- a/arch/powerpc/math-emu/frsqrte.c
+++ b/arch/powerpc/math-emu/frsqrte.c
@@ -6,7 +6,7 @@ int
frsqrte(void *frD, void *frB)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p\n", __func__, frD, frB);
#endif
return 0;
}
diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
index e36e6e72819..ecb5f28eb1f 100644
--- a/arch/powerpc/math-emu/fsel.c
+++ b/arch/powerpc/math-emu/fsel.c
@@ -11,7 +11,7 @@ fsel(u32 *frD, void *frA, u32 *frB, u32 *frC)
FP_DECL_D(A);
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 6f8319f64a8..38ec2b752e9 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -13,7 +13,7 @@ fsqrt(void *frD, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 3b2b1cf55c1..335263e06ee 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -14,7 +14,7 @@ fsqrts(void *frD, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 956679042bb..208d20fc52a 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -14,7 +14,7 @@ fsub(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index 3428117dfe8..0e61b808c44 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -15,7 +15,7 @@ fsubs(void *frD, void *frA, void *frB)
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
index 7d38101c329..6ec90b57c61 100644
--- a/arch/powerpc/math-emu/lfd.c
+++ b/arch/powerpc/math-emu/lfd.c
@@ -11,7 +11,7 @@ lfd(void *frD, void *ea)
if (copy_from_user(frD, ea, sizeof(double)))
return -EFAULT;
#ifdef DEBUG
- printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
+ printk("%s: D %p, ea %p: ", __func__, frD, ea);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
index c86dee3d765..6f18ebe3a7f 100644
--- a/arch/powerpc/math-emu/lfs.c
+++ b/arch/powerpc/math-emu/lfs.c
@@ -14,7 +14,7 @@ lfs(void *frD, void *ea)
float f;
#ifdef DEBUG
- printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
+ printk("%s: D %p, ea %p\n", __func__, frD, ea);
#endif
if (copy_from_user(&f, ea, sizeof(float)))
diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
index 106dd912914..41ba247faf8 100644
--- a/arch/powerpc/math-emu/mcrfs.c
+++ b/arch/powerpc/math-emu/mcrfs.c
@@ -10,7 +10,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS)
u32 value, clear;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
+ printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
#endif
clear = 15 << ((7 - crfS) << 2);
@@ -24,7 +24,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS)
*ccr |= (value << ((7 - crfD) << 2));
#ifdef DEBUG
- printk("CR: %08x\n", __FUNCTION__, *ccr);
+ printk("CR: %08x\n", __func__, *ccr);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
index f477c9170e7..b0e2106e6eb 100644
--- a/arch/powerpc/math-emu/mffs.c
+++ b/arch/powerpc/math-emu/mffs.c
@@ -10,7 +10,7 @@ mffs(u32 *frD)
frD[1] = __FPU_FPSCR;
#ifdef DEBUG
- printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
+ printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
index 99bfd80f4af..d3062350ea2 100644
--- a/arch/powerpc/math-emu/mtfsb0.c
+++ b/arch/powerpc/math-emu/mtfsb0.c
@@ -11,7 +11,7 @@ mtfsb0(int crbD)
__FPU_FPSCR &= ~(1 << (31 - crbD));
#ifdef DEBUG
- printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+ printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
index 3d9e7ed92d2..2e948704b56 100644
--- a/arch/powerpc/math-emu/mtfsb1.c
+++ b/arch/powerpc/math-emu/mtfsb1.c
@@ -11,7 +11,7 @@ mtfsb1(int crbD)
__FPU_FPSCR |= (1 << (31 - crbD));
#ifdef DEBUG
- printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+ printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
index d70cf714994..48014d8e3af 100644
--- a/arch/powerpc/math-emu/mtfsf.c
+++ b/arch/powerpc/math-emu/mtfsf.c
@@ -38,7 +38,7 @@ mtfsf(unsigned int FM, u32 *frB)
__FPU_FPSCR |= (frB[1] & mask);
#ifdef DEBUG
- printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
+ printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
index 71df854baa7..031e2009354 100644
--- a/arch/powerpc/math-emu/mtfsfi.c
+++ b/arch/powerpc/math-emu/mtfsfi.c
@@ -16,7 +16,7 @@ mtfsfi(unsigned int crfD, unsigned int IMM)
__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
#ifdef DEBUG
- printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
+ printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c
index 3f8c2558a9e..33a165c8df0 100644
--- a/arch/powerpc/math-emu/stfd.c
+++ b/arch/powerpc/math-emu/stfd.c
@@ -7,7 +7,7 @@ stfd(void *frS, void *ea)
{
#if 0
#ifdef DEBUG
- printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
+ printk("%s: S %p, ea %p: ", __func__, frS, ea);
dump_double(frS);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c
index 95caaeec6a0..f15a35f67e2 100644
--- a/arch/powerpc/math-emu/stfiwx.c
+++ b/arch/powerpc/math-emu/stfiwx.c
@@ -6,7 +6,7 @@ int
stfiwx(u32 *frS, void *ea)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frS, ea);
+ printk("%s: %p %p\n", __func__, frS, ea);
#endif
if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
index e87ca23c6dc..8689aa48ef6 100644
--- a/arch/powerpc/math-emu/stfs.c
+++ b/arch/powerpc/math-emu/stfs.c
@@ -15,7 +15,7 @@ stfs(void *frS, void *ea)
int err;
#ifdef DEBUG
- printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
+ printk("%s: S %p, ea %p\n", __func__, frS, ea);
#endif
__FP_UNPACK_D(A, frS);
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 3899ea97fbd..cecbbc76f62 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -97,7 +97,7 @@ unsigned long __init mmu_mapin_ram(void)
phys_addr_t p;
v = KERNELBASE;
- p = PPC_MEMSTART;
+ p = 0;
s = total_lowmem;
if (__map_without_ltlbs)
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 04dc08798d3..953fb919eb0 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -67,7 +67,7 @@ unsigned long __init mmu_mapin_ram(void)
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S */
- for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+ for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
addr += PPC_PIN_SIZE)
ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 41649a5d360..1c00e0196f6 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@ ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-y := fault.o mem.o lmb.o \
+obj-y := fault.o mem.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o \
mmu_context_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index c93a966b7e4..ada249bf977 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -49,18 +49,15 @@
#include <asm/mmu.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
-#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/setup.h>
+#include "mmu_decl.h"
+
extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
unsigned int num_tlbcam_entries;
static unsigned long __cam0, __cam1, __cam2;
-extern unsigned long total_lowmem;
-extern unsigned long __max_low_memory;
-extern unsigned long __initial_memory_limit;
-#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
#define NUM_TLBCAMS (16)
@@ -165,15 +162,15 @@ void invalidate_tlbcam_entry(int index)
void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
unsigned long cam2)
{
- settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+ settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0);
tlbcam_index++;
if (cam1) {
tlbcam_index++;
- settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+ settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0);
}
if (cam2) {
tlbcam_index++;
- settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+ settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0);
}
}
@@ -196,35 +193,32 @@ unsigned long __init mmu_mapin_ram(void)
void __init
adjust_total_lowmem(void)
{
- unsigned long max_low_mem = MAX_LOW_MEM;
- unsigned long cam_max = 0x10000000;
- unsigned long ram;
+ phys_addr_t max_lowmem_size = __max_low_memory;
+ phys_addr_t cam_max_size = 0x10000000;
+ phys_addr_t ram;
- /* adjust CAM size to max_low_mem */
- if (max_low_mem < cam_max)
- cam_max = max_low_mem;
+ /* adjust CAM size to max_lowmem_size */
+ if (max_lowmem_size < cam_max_size)
+ cam_max_size = max_lowmem_size;
- /* adjust lowmem size to max_low_mem */
- if (max_low_mem < total_lowmem)
- ram = max_low_mem;
- else
- ram = total_lowmem;
+ /* adjust lowmem size to max_lowmem_size */
+ ram = min(max_lowmem_size, total_lowmem);
/* Calculate CAM values */
__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam0 > cam_max)
- __cam0 = cam_max;
+ if (__cam0 > cam_max_size)
+ __cam0 = cam_max_size;
ram -= __cam0;
if (ram) {
__cam1 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam1 > cam_max)
- __cam1 = cam_max;
+ if (__cam1 > cam_max_size)
+ __cam1 = cam_max_size;
ram -= __cam1;
}
if (ram) {
__cam2 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam2 > cam_max)
- __cam2 = cam_max;
+ if (__cam2 > cam_max_size)
+ __cam2 = cam_max_size;
ram -= __cam2;
}
@@ -232,6 +226,6 @@ adjust_total_lowmem(void)
" CAM2=%ldMb residual: %ldMb\n",
__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
- __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
- __initial_memory_limit = __max_low_memory;
+ __max_low_memory = __cam0 + __cam1 + __cam2;
+ __initial_memory_limit_addr = memstart_addr + __max_low_memory;
}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index a83dfa3cf40..2b5a399f6fa 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,6 +31,7 @@
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/signal.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
@@ -41,7 +42,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
@@ -191,6 +192,29 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
return ret < 0 ? ret : 0;
}
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
+ int psize, int ssize)
+{
+ unsigned long vaddr;
+ unsigned int step, shift;
+
+ shift = mmu_psize_defs[psize].shift;
+ step = 1 << shift;
+
+ if (!ppc_md.hpte_removebolted) {
+ printk(KERN_WARNING "Platform doesn't implement "
+ "hpte_removebolted\n");
+ return -EINVAL;
+ }
+
+ for (vaddr = vstart; vaddr < vend; vaddr += step)
+ ppc_md.hpte_removebolted(vaddr, psize, ssize);
+
+ return 0;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
static int __init htab_dt_scan_seg_sizes(unsigned long node,
const char *uname, int depth,
void *data)
@@ -434,6 +458,12 @@ void create_section_mapping(unsigned long start, unsigned long end)
_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
mmu_linear_psize, mmu_kernel_ssize));
}
+
+int remove_section_mapping(unsigned long start, unsigned long end)
+{
+ return htab_remove_mapping(start, end, mmu_linear_psize,
+ mmu_kernel_ssize);
+}
#endif /* CONFIG_MEMORY_HOTPLUG */
static inline void make_bl(unsigned int *insn_addr, void *func)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 977cb1ee5e7..47325f23c51 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,6 +30,7 @@
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -41,7 +42,6 @@
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
-#include <asm/lmb.h>
#include <asm/sections.h>
#include "mmu_decl.h"
@@ -59,8 +59,8 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long total_memory;
unsigned long total_lowmem;
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
+phys_addr_t memstart_addr;
+phys_addr_t lowmem_end_addr;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
@@ -95,10 +95,10 @@ int __map_without_ltlbs;
unsigned long __max_low_memory = MAX_LOW_MEM;
/*
- * limit of what is accessible with initial MMU setup -
+ * address of the limit of what is accessible with initial MMU setup -
* 256MB usually, but only 16MB on 601.
*/
-unsigned long __initial_memory_limit = 0x10000000;
+phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
/*
* Check for command-line options that affect what MMU_init will do.
@@ -131,10 +131,10 @@ void __init MMU_init(void)
/* 601 can only access 16MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
- __initial_memory_limit = 0x01000000;
+ __initial_memory_limit_addr = 0x01000000;
/* 8xx can only access 8MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
- __initial_memory_limit = 0x00800000;
+ __initial_memory_limit_addr = 0x00800000;
/* parse args from command line */
MMU_setup();
@@ -145,8 +145,8 @@ void __init MMU_init(void)
printk(KERN_WARNING "Only using first contiguous memory region");
}
- total_memory = lmb_end_of_DRAM();
- total_lowmem = total_memory;
+ total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+ lowmem_end_addr = memstart_addr + total_lowmem;
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
@@ -157,9 +157,10 @@ void __init MMU_init(void)
if (total_lowmem > __max_low_memory) {
total_lowmem = __max_low_memory;
+ lowmem_end_addr = memstart_addr + total_lowmem;
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
- lmb_enforce_memory_limit(total_lowmem);
+ lmb_enforce_memory_limit(lowmem_end_addr);
lmb_analyze();
#endif /* CONFIG_HIGHMEM */
}
@@ -184,8 +185,6 @@ void __init MMU_init(void)
/* Map in I/O resources */
if (ppc_md.progress)
ppc_md.progress("MMU:setio", 0x302);
- if (ppc_md.setup_io_mappings)
- ppc_md.setup_io_mappings();
/* Initialize the context management stuff */
mmu_context_init();
@@ -208,7 +207,7 @@ void __init *early_get_page(void)
p = alloc_bootmem_pages(PAGE_SIZE);
} else {
p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
- __initial_memory_limit));
+ __initial_memory_limit_addr));
}
return p;
}
@@ -276,7 +275,7 @@ static int __init setup_kcore(void)
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
- panic("%s: kmalloc failed\n", __FUNCTION__);
+ panic("%s: kmalloc failed\n", __func__);
/* must stay under 32 bits */
if ( 0xfffffffful - (unsigned long)__va(base) < size) {
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c0f5cff7703..698bd000f98 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -38,11 +38,11 @@
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/prom.h>
-#include <asm/lmb.h>
#include <asm/rtas.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
@@ -72,8 +72,7 @@
#warning TASK_SIZE is smaller than it needs to be.
#endif
-/* max amount of RAM to use */
-unsigned long __max_memory;
+phys_addr_t memstart_addr;
void free_initmem(void)
{
@@ -122,7 +121,7 @@ static int __init setup_kcore(void)
/* GFP_ATOMIC to avoid might_sleep warnings during boot */
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
- panic("%s: kmalloc failed\n", __FUNCTION__);
+ panic("%s: kmalloc failed\n", __func__);
kclist_add(kcore_mem, __va(base), size);
}
diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c
deleted file mode 100644
index 4ce23bcf8a5..00000000000
--- a/arch/powerpc/mm/lmb.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Procedures for maintaining information about logical memory blocks.
- *
- * Peter Bergner, IBM Corp. June 2001.
- * Copyright (C) 2001 Peter Bergner.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#ifdef CONFIG_PPC32
-#include "mmu_decl.h" /* for __max_low_memory */
-#endif
-
-#undef DEBUG
-
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-#define LMB_ALLOC_ANYWHERE 0
-
-struct lmb lmb;
-
-void lmb_dump_all(void)
-{
-#ifdef DEBUG
- unsigned long i;
-
- DBG("lmb_dump_all:\n");
- DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
- DBG(" memory.size = 0x%lx\n", lmb.memory.size);
- for (i=0; i < lmb.memory.cnt ;i++) {
- DBG(" memory.region[0x%x].base = 0x%lx\n",
- i, lmb.memory.region[i].base);
- DBG(" .size = 0x%lx\n",
- lmb.memory.region[i].size);
- }
-
- DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
- DBG(" reserved.size = 0x%lx\n", lmb.reserved.size);
- for (i=0; i < lmb.reserved.cnt ;i++) {
- DBG(" reserved.region[0x%x].base = 0x%lx\n",
- i, lmb.reserved.region[i].base);
- DBG(" .size = 0x%lx\n",
- lmb.reserved.region[i].size);
- }
-#endif /* DEBUG */
-}
-
-static unsigned long __init lmb_addrs_overlap(unsigned long base1,
- unsigned long size1, unsigned long base2, unsigned long size2)
-{
- return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
-}
-
-static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
- unsigned long base2, unsigned long size2)
-{
- if (base2 == base1 + size1)
- return 1;
- else if (base1 == base2 + size2)
- return -1;
-
- return 0;
-}
-
-static long __init lmb_regions_adjacent(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
-{
- unsigned long base1 = rgn->region[r1].base;
- unsigned long size1 = rgn->region[r1].size;
- unsigned long base2 = rgn->region[r2].base;
- unsigned long size2 = rgn->region[r2].size;
-
- return lmb_addrs_adjacent(base1, size1, base2, size2);
-}
-
-static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
-{
- unsigned long i;
-
- for (i = r; i < rgn->cnt - 1; i++) {
- rgn->region[i].base = rgn->region[i + 1].base;
- rgn->region[i].size = rgn->region[i + 1].size;
- }
- rgn->cnt--;
-}
-
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
-{
- rgn->region[r1].size += rgn->region[r2].size;
- lmb_remove_region(rgn, r2);
-}
-
-/* This routine called with relocation disabled. */
-void __init lmb_init(void)
-{
- /* Create a dummy zero size LMB which will get coalesced away later.
- * This simplifies the lmb_add() code below...
- */
- lmb.memory.region[0].base = 0;
- lmb.memory.region[0].size = 0;
- lmb.memory.cnt = 1;
-
- /* Ditto. */
- lmb.reserved.region[0].base = 0;
- lmb.reserved.region[0].size = 0;
- lmb.reserved.cnt = 1;
-}
-
-/* This routine may be called with relocation disabled. */
-void __init lmb_analyze(void)
-{
- int i;
-
- lmb.memory.size = 0;
-
- for (i = 0; i < lmb.memory.cnt; i++)
- lmb.memory.size += lmb.memory.region[i].size;
-}
-
-/* This routine called with relocation disabled. */
-static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
- unsigned long size)
-{
- unsigned long coalesced = 0;
- long adjacent, i;
-
- /* First try and coalesce this LMB with another. */
- for (i=0; i < rgn->cnt; i++) {
- unsigned long rgnbase = rgn->region[i].base;
- unsigned long rgnsize = rgn->region[i].size;
-
- if ((rgnbase == base) && (rgnsize == size))
- /* Already have this region, so we're done */
- return 0;
-
- adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
- if ( adjacent > 0 ) {
- rgn->region[i].base -= size;
- rgn->region[i].size += size;
- coalesced++;
- break;
- }
- else if ( adjacent < 0 ) {
- rgn->region[i].size += size;
- coalesced++;
- break;
- }
- }
-
- if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) {
- lmb_coalesce_regions(rgn, i, i+1);
- coalesced++;
- }
-
- if (coalesced)
- return coalesced;
- if (rgn->cnt >= MAX_LMB_REGIONS)
- return -1;
-
- /* Couldn't coalesce the LMB, so add it to the sorted table. */
- for (i = rgn->cnt-1; i >= 0; i--) {
- if (base < rgn->region[i].base) {
- rgn->region[i+1].base = rgn->region[i].base;
- rgn->region[i+1].size = rgn->region[i].size;
- } else {
- rgn->region[i+1].base = base;
- rgn->region[i+1].size = size;
- break;
- }
- }
- rgn->cnt++;
-
- return 0;
-}
-
-/* This routine may be called with relocation disabled. */
-long __init lmb_add(unsigned long base, unsigned long size)
-{
- struct lmb_region *_rgn = &(lmb.memory);
-
- /* On pSeries LPAR systems, the first LMB is our RMO region. */
- if (base == 0)
- lmb.rmo_size = size;
-
- return lmb_add_region(_rgn, base, size);
-
-}
-
-long __init lmb_reserve(unsigned long base, unsigned long size)
-{
- struct lmb_region *_rgn = &(lmb.reserved);
-
- BUG_ON(0 == size);
-
- return lmb_add_region(_rgn, base, size);
-}
-
-long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
- unsigned long size)
-{
- unsigned long i;
-
- for (i=0; i < rgn->cnt; i++) {
- unsigned long rgnbase = rgn->region[i].base;
- unsigned long rgnsize = rgn->region[i].size;
- if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
- break;
- }
- }
-
- return (i < rgn->cnt) ? i : -1;
-}
-
-unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
-{
- return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
-}
-
-unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
- unsigned long max_addr)
-{
- unsigned long alloc;
-
- alloc = __lmb_alloc_base(size, align, max_addr);
-
- if (alloc == 0)
- panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
- size, max_addr);
-
- return alloc;
-}
-
-unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align,
- unsigned long max_addr)
-{
- long i, j;
- unsigned long base = 0;
-
- BUG_ON(0 == size);
-
-#ifdef CONFIG_PPC32
- /* On 32-bit, make sure we allocate lowmem */
- if (max_addr == LMB_ALLOC_ANYWHERE)
- max_addr = __max_low_memory;
-#endif
- for (i = lmb.memory.cnt-1; i >= 0; i--) {
- unsigned long lmbbase = lmb.memory.region[i].base;
- unsigned long lmbsize = lmb.memory.region[i].size;
-
- if (max_addr == LMB_ALLOC_ANYWHERE)
- base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
- else if (lmbbase < max_addr) {
- base = min(lmbbase + lmbsize, max_addr);
- base = _ALIGN_DOWN(base - size, align);
- } else
- continue;
-
- while ((lmbbase <= base) &&
- ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
- base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
- align);
-
- if ((base != 0) && (lmbbase <= base))
- break;
- }
-
- if (i < 0)
- return 0;
-
- lmb_add_region(&lmb.reserved, base, size);
-
- return base;
-}
-
-/* You must call lmb_analyze() before this. */
-unsigned long __init lmb_phys_mem_size(void)
-{
- return lmb.memory.size;
-}
-
-unsigned long __init lmb_end_of_DRAM(void)
-{
- int idx = lmb.memory.cnt - 1;
-
- return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
-}
-
-/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(unsigned long memory_limit)
-{
- unsigned long i, limit;
- struct lmb_property *p;
-
- if (! memory_limit)
- return;
-
- /* Truncate the lmb regions to satisfy the memory limit. */
- limit = memory_limit;
- for (i = 0; i < lmb.memory.cnt; i++) {
- if (limit > lmb.memory.region[i].size) {
- limit -= lmb.memory.region[i].size;
- continue;
- }
-
- lmb.memory.region[i].size = limit;
- lmb.memory.cnt = i + 1;
- break;
- }
-
- if (lmb.memory.region[0].size < lmb.rmo_size)
- lmb.rmo_size = lmb.memory.region[0].size;
-
- /* And truncate any reserves above the limit also. */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- p = &lmb.reserved.region[i];
-
- if (p->base > memory_limit)
- p->size = 0;
- else if ((p->base + p->size) > memory_limit)
- p->size = memory_limit - p->base;
-
- if (p->size == 0) {
- lmb_remove_region(&lmb.reserved, i);
- i--;
- }
- }
-}
-
-int __init lmb_is_reserved(unsigned long addr)
-{
- int i;
-
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long upper = lmb.reserved.region[i].base +
- lmb.reserved.region[i].size - 1;
- if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
- return 1;
- }
- return 0;
-}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index be5c506779a..16def4dcff6 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -31,6 +31,7 @@
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/suspend.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -42,7 +43,6 @@
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
-#include <asm/lmb.h>
#include <asm/sections.h>
#include <asm/vdso.h>
@@ -111,7 +111,7 @@ int memory_add_physaddr_to_nid(u64 start)
}
#endif
-int __devinit arch_add_memory(int nid, u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
{
struct pglist_data *pgdata;
struct zone *zone;
@@ -175,7 +175,6 @@ void show_mem(void)
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_pgdat(pgdat) {
unsigned long flags;
pgdat_resize_lock(pgdat, &flags);
@@ -217,9 +216,11 @@ void __init do_init_bootmem(void)
unsigned long total_pages;
int boot_mapsize;
- max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
+ max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
#endif
/*
@@ -245,18 +246,18 @@ void __init do_init_bootmem(void)
* present.
*/
#ifdef CONFIG_HIGHMEM
- free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+ free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++) {
unsigned long addr = lmb.reserved.region[i].base +
lmb_size_bytes(&lmb.reserved, i) - 1;
- if (addr < total_lowmem)
+ if (addr < lowmem_end_addr)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i),
BOOTMEM_DEFAULT);
- else if (lmb.reserved.region[i].base < total_lowmem) {
- unsigned long adjusted_size = total_lowmem -
+ else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+ unsigned long adjusted_size = lowmem_end_addr -
lmb.reserved.region[i].base;
reserve_bootmem(lmb.reserved.region[i].base,
adjusted_size, BOOTMEM_DEFAULT);
@@ -326,7 +327,7 @@ void __init paging_init(void)
(top_of_ram - total_ram) >> 20);
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_HIGHMEM
- max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
#else
max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
@@ -381,7 +382,7 @@ void __init mem_init(void)
{
unsigned long pfn, highmem_mapnr;
- highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+ highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
struct page *page = pfn_to_page(pfn);
if (lmb_is_reserved(pfn << PAGE_SHIFT))
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index ebfd13dc9d1..04802252a64 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -48,9 +48,11 @@ extern unsigned int num_tlbcam_entries;
extern unsigned long ioremap_bot;
extern unsigned long __max_low_memory;
-extern unsigned long __initial_memory_limit;
+extern phys_addr_t __initial_memory_limit_addr;
extern unsigned long total_memory;
extern unsigned long total_lowmem;
+extern phys_addr_t memstart_addr;
+extern phys_addr_t lowmem_end_addr;
/* ...and now those things that may be slightly different between processor
* architectures. -- Dan
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a300d254aac..1efd631211e 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,8 +17,9 @@
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
+#include <linux/lmb.h>
#include <asm/sparsemem.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/system.h>
#include <asm/smp.h>
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index ac3390f8190..64c44bcc68d 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -281,12 +281,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
*/
void __init mapin_ram(void)
{
- unsigned long v, p, s, f;
+ unsigned long v, s, f;
+ phys_addr_t p;
int ktext;
s = mmu_mapin_ram();
v = KERNELBASE + s;
- p = PPC_MEMSTART + s;
+ p = memstart_addr + s;
for (; s < total_lowmem; s += PAGE_SIZE) {
ktext = ((char *) v >= _stext && (char *) v < etext);
f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 5c45d474cfc..cef9f156874 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,11 +26,11 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/highmem.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/mmu.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
#include "mmu_decl.h"
@@ -82,7 +82,6 @@ unsigned long __init mmu_mapin_ram(void)
#else
unsigned long tot, bl, done;
unsigned long max_size = (256<<20);
- unsigned long align;
if (__map_without_bats) {
printk(KERN_DEBUG "RAM mapped without BATs\n");
@@ -93,19 +92,13 @@ unsigned long __init mmu_mapin_ram(void)
/* Make sure we don't map a block larger than the
smallest alignment of the physical address. */
- /* alignment of PPC_MEMSTART */
- align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
- /* set BAT block size to MIN(max_size, align) */
- if (align && align < max_size)
- max_size = align;
-
tot = total_lowmem;
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > tot)
break;
}
- setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
+ setbat(2, KERNELBASE, 0, bl, _PAGE_RAM);
done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
if ((done < tot) && !bat_addrs[3].limit) {
/* use BAT3 to cover a bit more */
@@ -113,7 +106,7 @@ unsigned long __init mmu_mapin_ram(void)
for (bl = 128<<10; bl < max_size; bl <<= 1)
if (bl * 2 > tot)
break;
- setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
+ setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM);
done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
}
@@ -240,7 +233,7 @@ void __init MMU_init_hw(void)
*/
if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
- __initial_memory_limit));
+ __initial_memory_limit_addr));
cacheable_memzero(Hash, Hash_size);
_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 50448d5de9d..efbbd13d93e 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,12 +12,14 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lmb.h>
+
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/paca.h>
#include <asm/cputable.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/firmware.h>
#include <asm/iseries/hv_call.h>
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 257b13cb18a..2a9b4a04932 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -68,7 +68,7 @@ static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num)
if (spu_num >= num_spu_nodes) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Invalid index %d into spu info cache\n",
- __FUNCTION__, __LINE__, spu_num);
+ __func__, __LINE__, spu_num);
ret_info = NULL;
goto out;
}
@@ -115,7 +115,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId)
if (!info) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: create vma_map failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
retval = -ENOMEM;
goto err_alloc;
}
@@ -123,7 +123,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId)
if (!new_map) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: create vma_map failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
retval = -ENOMEM;
goto err_alloc;
}
@@ -171,7 +171,7 @@ static int release_cached_info(int spu_index)
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: "
"Invalid index %d into spu info cache\n",
- __FUNCTION__, __LINE__, spu_index);
+ __func__, __LINE__, spu_index);
goto out;
}
end = spu_index + 1;
@@ -273,7 +273,7 @@ fail_no_image_cookie:
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Cannot find dcookie for SPU binary\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto out;
}
@@ -467,7 +467,7 @@ int spu_sync_stop(void)
if (ret) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: spu_switch_event_unregister returned %d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
goto out;
}
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 9a932177e70..fff66662d02 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -72,7 +72,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL);
if (!new) {
printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
vma_map_free(map);
return NULL;
}
@@ -134,19 +134,19 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_ident parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
if (ehdr.e_machine != EM_SPU) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_machine parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
if (ehdr.e_type != ET_EXEC) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_type parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
phdr_start = spu_elf_start + ehdr.e_phoff;
@@ -232,7 +232,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
if (overlay_tbl_offset < 0) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Error finding SPU overlay table\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
ovly_table = spu_elf_start + overlay_tbl_offset;
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 9eed1f68fca..5ff4de3eb3b 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -216,7 +216,7 @@ static void pm_rtas_reset_signals(u32 node)
* failure to stop OProfile.
*/
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
static int pm_rtas_activate_signals(u32 node, u32 count)
@@ -255,7 +255,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)
if (unlikely(ret)) {
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return -EIO;
}
}
@@ -560,7 +560,7 @@ static int cell_reg_setup(struct op_counter_config *ctr,
if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
"%s: rtas token ibm,cbe-spu-perftools unknown\n",
- __FUNCTION__);
+ __func__);
return -EIO;
}
}
@@ -576,7 +576,7 @@ static int cell_reg_setup(struct op_counter_config *ctr,
if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
"%s: rtas token ibm,cbe-perftools unknown\n",
- __FUNCTION__);
+ __func__);
return -EIO;
}
@@ -853,7 +853,7 @@ static int pm_rtas_activate_spu_profiling(u32 node)
if (unlikely(ret)) {
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return -EIO;
}
@@ -949,7 +949,7 @@ static int cell_global_start_spu(struct op_counter_config *ctr)
if (unlikely(ret != 0)) {
printk(KERN_ERR
"%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
rtas_error = -EIO;
goto out;
}
@@ -1061,7 +1061,7 @@ static void cell_global_stop_spu(void)
if (unlikely(rtn_value != 0)) {
printk(KERN_ERR
"%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __FUNCTION__, rtn_value);
+ __func__, rtn_value);
}
/* Deactivate the signals */
diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c
index 13d1345026d..ae2e7f67c18 100644
--- a/arch/powerpc/platforms/40x/ep405.c
+++ b/arch/powerpc/platforms/40x/ep405.c
@@ -29,6 +29,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static struct device_node *bcsr_node;
static void __iomem *bcsr_regs;
@@ -119,5 +120,6 @@ define_machine(ep405) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
index f9206a7fede..1dd24ffc0dc 100644
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ b/arch/powerpc/platforms/40x/kilauea.c
@@ -1,7 +1,7 @@
/*
* Kilauea board specific routines
*
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* Based on the Walnut code by
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id kilauea_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@ define_machine(kilauea) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
index 4e4df72fc9c..a6a1d6017b7 100644
--- a/arch/powerpc/platforms/40x/makalu.c
+++ b/arch/powerpc/platforms/40x/makalu.c
@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id makalu_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@ define_machine(makalu) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 0422590040d..fc7fb001276 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/ppc4xx.h>
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
{ .compatible = "xlnx,plb-v46-1.00.a", },
@@ -48,5 +49,6 @@ define_machine(virtex) {
.probe = virtex_probe,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c
index b8b257efeb7..335df91fbee 100644
--- a/arch/powerpc/platforms/40x/walnut.c
+++ b/arch/powerpc/platforms/40x/walnut.c
@@ -26,6 +26,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
@@ -61,5 +62,6 @@ define_machine(walnut) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
index 42eabf87fea..dbc4d2b4301 100644
--- a/arch/powerpc/platforms/44x/44x.h
+++ b/arch/powerpc/platforms/44x/44x.h
@@ -3,6 +3,5 @@
extern u8 as1_readb(volatile u8 __iomem *addr);
extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
-extern void ppc44x_reset_system(char *cmd);
#endif /* __POWERPC_PLATFORMS_44X_44X_H */
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 1bfb2191010..6abe91357ee 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -67,6 +67,25 @@ config WARP
See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
Telephony Developers" link for more information.
+config CANYONLANDS
+ bool "Canyonlands"
+ depends on 44x
+ default n
+ select 460EX
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC460EX evaluation board.
+
+config YOSEMITE
+ bool "Yosemite"
+ depends on 44x
+ default n
+ select 440EP
+ select PCI
+ help
+ This option enables support for the AMCC PPC440EP evaluation board.
+
#config LUAN
# bool "Luan"
# depends on 44x
@@ -122,6 +141,14 @@ config 440SPe
bool
select IBM_NEW_EMAC_EMAC4
+config 460EX
+ bool
+ select PPC_FPU
+ select IBM_NEW_EMAC_EMAC4
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
+ select IBM_NEW_EMAC_TAH
+
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 0864d4f1cbc..774165f9acd 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1,9 +1,11 @@
-obj-$(CONFIG_44x) := misc_44x.o
+obj-$(CONFIG_44x) := misc_44x.o idle.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_TAISHAN) += taishan.o
obj-$(CONFIG_BAMBOO) += bamboo.o
+obj-$(CONFIG_YOSEMITE) += bamboo.o
obj-$(CONFIG_SEQUOIA) += sequoia.o
obj-$(CONFIG_KATMAI) += katmai.o
obj-$(CONFIG_RAINIER) += rainier.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_WARP) += warp-nand.o
+obj-$(CONFIG_CANYONLANDS) += canyonlands.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
index fb9a22a7e8d..cef169e9515 100644
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ b/arch/powerpc/platforms/44x/bamboo.c
@@ -22,8 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id bamboo_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -53,11 +52,11 @@ static int __init bamboo_probe(void)
}
define_machine(bamboo) {
- .name = "Bamboo",
- .probe = bamboo_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .name = "Bamboo",
+ .probe = bamboo_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 00000000000..3949289f51d
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,63 @@
+/*
+ * Canyonlands board specific routines
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Based on the Katmai code by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id canyonlands_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init canyonlands_device_probe(void)
+{
+ of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(canyonlands, canyonlands_device_probe);
+
+static int __init canyonlands_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
+ return 0;
+
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+ return 1;
+}
+
+define_machine(canyonlands) {
+ .name = "Canyonlands",
+ .probe = canyonlands_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c
index 1a8d467bff8..a0e8fe4662f 100644
--- a/arch/powerpc/platforms/44x/ebony.c
+++ b/arch/powerpc/platforms/44x/ebony.c
@@ -26,8 +26,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id ebony_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -66,6 +65,6 @@ define_machine(ebony) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/idle.c b/arch/powerpc/platforms/44x/idle.c
new file mode 100644
index 00000000000..7a81f921fef
--- /dev/null
+++ b/arch/powerpc/platforms/44x/idle.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2008 IBM Corp.
+ *
+ * Based on arch/powerpc/platforms/pasemi/idle.c:
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Added by: Jerone Young <jyoung5@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <asm/machdep.h>
+
+static int mode_spin;
+
+static void ppc44x_idle(void)
+{
+ unsigned long msr_save;
+
+ msr_save = mfmsr();
+ /* set wait state MSR */
+ mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
+ isync();
+ /* return to initial state */
+ mtmsr(msr_save);
+ isync();
+}
+
+int __init ppc44x_idle_init(void)
+{
+ if (!mode_spin) {
+ /* If we are not setting spin mode
+ then we set to wait mode */
+ ppc_md.power_save = &ppc44x_idle;
+ }
+
+ return 0;
+}
+
+arch_initcall(ppc44x_idle_init);
+
+static int __init idle_param(char *p)
+{
+
+ if (!strcmp("spin", p)) {
+ mode_spin = 1;
+ ppc_md.power_save = NULL;
+ }
+
+ return 0;
+}
+
+early_param("idle", idle_param);
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
index 11134121f27..44f4b3a00ce 100644
--- a/arch/powerpc/platforms/44x/katmai.c
+++ b/arch/powerpc/platforms/44x/katmai.c
@@ -22,8 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id katmai_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -58,6 +57,6 @@ define_machine(katmai) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S
index 3bce71d5d75..dc12b8009e4 100644
--- a/arch/powerpc/platforms/44x/misc_44x.S
+++ b/arch/powerpc/platforms/44x/misc_44x.S
@@ -44,14 +44,3 @@ _GLOBAL(as1_writeb)
sync
isync
blr
-
-/*
- * void ppc44x_reset_system(char *cmd)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(ppc44x_reset_system)
- mfspr r13,SPRN_DBCR0
- oris r13,r13,DBCR0_RST_SYSTEM@h
- mtspr SPRN_DBCR0,r13
- b . /* Just in case the reset doesn't work */
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
index a7fae1cf69c..4f1ff84c4b6 100644
--- a/arch/powerpc/platforms/44x/rainier.c
+++ b/arch/powerpc/platforms/44x/rainier.c
@@ -22,7 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id rainier_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -57,6 +57,6 @@ define_machine(rainier) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
index d279db42c89..49eb73daacd 100644
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ b/arch/powerpc/platforms/44x/sequoia.c
@@ -23,7 +23,7 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id sequoia_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -58,6 +58,6 @@ define_machine(sequoia) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
index 28ab7e2e02c..49c78b2098b 100644
--- a/arch/powerpc/platforms/44x/taishan.c
+++ b/arch/powerpc/platforms/44x/taishan.c
@@ -29,8 +29,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id taishan_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -68,6 +67,6 @@ define_machine(taishan) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 84ab78ff8c0..9150318cfc5 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,6 +11,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/ndfc.h>
+#include <asm/machdep.h>
#ifdef CONFIG_MTD_NAND_NDFC
@@ -100,6 +101,6 @@ static int warp_setup_nand_flash(void)
return 0;
}
-device_initcall(warp_setup_nand_flash);
+machine_device_initcall(warp, warp_setup_nand_flash);
#endif
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index da5b7b7599d..39cf6150a72 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -18,9 +18,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-
-#include "44x.h"
-
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id warp_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -49,7 +47,7 @@ define_machine(warp) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 956f459e175..6d584f4e3c9 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -63,7 +63,7 @@ lite5200_fix_clock_config(void)
of_node_put(np);
if (!cdm) {
printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
- __FUNCTION__);
+ __func__);
return;
}
@@ -98,7 +98,7 @@ lite5200_fix_port_config(void)
of_node_put(np);
if (!gpio) {
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
- __FUNCTION__);
+ __func__);
return;
}
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 4fad6c7bf9f..917ac889155 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -11,7 +11,6 @@ config MPC8272_ADS
select 8260
select FSL_SOC
select PQ2_ADS_PCI_PIC if PCI
- select PPC_CPM_NEW_BINDING
help
This option enables support for the MPC8272 ADS board
@@ -22,7 +21,6 @@ config PQ2FADS
select 8260
select FSL_SOC
select PQ2_ADS_PCI_PIC if PCI
- select PPC_CPM_NEW_BINDING
help
This option enables support for the PQ2FADS board
@@ -31,7 +29,6 @@ config EP8248E
select 8272
select 8260
select FSL_SOC
- select PPC_CPM_NEW_BINDING
select MDIO_BITBANG
help
This enables support for the Embedded Planet EP8248E board.
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 2293ae51383..c00356bdb1d 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -46,6 +46,7 @@ static void __init mpc837x_rdb_setup_arch(void)
static struct of_device_id mpc837x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 68065e62fc3..88a3b5cabb1 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -16,6 +16,7 @@
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
#define MPC8315_SCCR_USB_MASK 0x00c00000
#define MPC8315_SCCR_USB_DRCM_11 0x00c00000
+#define MPC8315_SCCR_USB_DRCM_01 0x00400000
#define MPC837X_SCCR_USB_DRCM_11 0x00c00000
/* system i/o configuration register low */
@@ -37,6 +38,7 @@
/* USB Control Register */
#define FSL_USB2_CONTROL_OFFS 0x500
#define CONTROL_UTMI_PHY_EN 0x00000200
+#define CONTROL_REFSEL_24MHZ 0x00000040
#define CONTROL_REFSEL_48MHZ 0x00000080
#define CONTROL_PHY_CLK_SEL_ULPI 0x00000400
#define CONTROL_OTG_PORT 0x00000020
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 471fdd8f410..64bcf0a33c7 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -129,7 +129,7 @@ int mpc831x_usb_cfg(void)
if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
MPC8315_SCCR_USB_MASK,
- MPC8315_SCCR_USB_DRCM_11);
+ MPC8315_SCCR_USB_DRCM_01);
else
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
MPC83XX_SCCR_USB_MASK,
@@ -164,9 +164,15 @@ int mpc831x_usb_cfg(void)
/* Using on-chip PHY */
if (prop && (!strcmp(prop, "utmi_wide") ||
!strcmp(prop, "utmi"))) {
- /* Set UTMI_PHY_EN, REFSEL to 48MHZ */
+ u32 refsel;
+
+ if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+ refsel = CONTROL_REFSEL_24MHZ;
+ else
+ refsel = CONTROL_REFSEL_48MHZ;
+ /* Set UTMI_PHY_EN and REFSEL */
out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
- CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
+ CONTROL_UTMI_PHY_EN | refsel);
/* Using external UPLI PHY */
} else if (prop && !strcmp(prop, "ulpi")) {
/* Set PHY_CLK_SEL to ULPI */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7e76ddbd582..7ff29d53dc2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -19,7 +19,6 @@ config MPC8540_ADS
config MPC8560_ADS
bool "Freescale MPC8560 ADS"
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING
select CPM2
help
This option enables support for the MPC 8560 ADS board
@@ -46,6 +45,12 @@ config MPC85xx_DS
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config KSI8560
+ bool "Emerson KSI8560"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Emerson KSI8560 board
+
config STX_GP3
bool "Silicon Turnkey Express GP3"
help
@@ -53,14 +58,12 @@ config STX_GP3
board.
select CPM2
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING
config TQM8540
bool "TQ Components TQM8540"
help
This option enables support for the TQ Components TQM8540 board.
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING
select TQM85xx
config TQM8541
@@ -68,7 +71,6 @@ config TQM8541
help
This option enables support for the TQ Components TQM8541 board.
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING
select TQM85xx
select CPM2
@@ -77,7 +79,6 @@ config TQM8555
help
This option enables support for the TQ Components TQM8555 board.
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING
select TQM85xx
select CPM2
@@ -86,7 +87,6 @@ config TQM8560
help
This option enables support for the TQ Components TQM8560 board.
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING
select TQM85xx
select CPM2
@@ -99,7 +99,6 @@ config SBC8548
config SBC8560
bool "Wind River SBC8560"
select DEFAULT_UIMAGE
- select PPC_CPM_NEW_BINDING if CPM2
help
This option enables support for the Wind River SBC8560 board
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index cb7af4ebd75..6cea185f62b 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
+obj-$(CONFIG_KSI8560) += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
new file mode 100644
index 00000000000..2145adeb220
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -0,0 +1,257 @@
+/*
+ * Board setup routines for the Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc85xx_ads.c maintained by Kumar Gala
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+
+
+#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */
+#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */
+#define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */
+
+#define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */
+
+static void __iomem *cpld_base = NULL;
+
+static void machine_restart(char *cmd)
+{
+ if (cpld_base)
+ out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR);
+ else
+ printk(KERN_ERR "Can't find CPLD base, hang forever\n");
+
+ for (;;);
+}
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ int cascade_irq;
+
+ while ((cascade_irq = cpm2_get_irq()) >= 0)
+ generic_handle_irq(cascade_irq);
+
+ desc->chip->eoi(irq);
+}
+
+static void __init ksi8560_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+#ifdef CONFIG_CPM2
+ int irq;
+#endif
+
+ np = of_find_node_by_type(NULL, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+ /* Setup CPM2 PIC */
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
+ }
+ irq = irq_of_parse_and_map(np, 0);
+
+ cpm2_pic_init(np);
+ of_node_put(np);
+ set_irq_chained_handler(irq, cpm2_cascade);
+
+ setup_irq(0, NULL);
+#endif
+}
+
+#ifdef CONFIG_CPM2
+/*
+ * Setup I/O ports
+ */
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin __initdata ksi8560_pins[] = {
+ /* SCC1 */
+ {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* SCC2 */
+ {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC1 */
+ {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */
+ {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */
+
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) {
+ struct cpm_pin *pin = &ksi8560_pins[i];
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init ksi8560_setup_arch(void)
+{
+ struct device_node *cpld;
+
+ cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld");
+ if (cpld)
+ cpld_base = of_iomap(cpld, 0);
+ else
+ printk(KERN_ERR "Can't find CPLD in device tree\n");
+
+ if (ppc_md.progress)
+ ppc_md.progress("ksi8560_setup_arch()", 0);
+
+#ifdef CONFIG_CPM2
+ cpm2_reset();
+ init_ioports();
+#endif
+}
+
+static void ksi8560_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Emerson Network Power\n");
+ seq_printf(m, "Board\t\t: KSI8560\n");
+
+ if (cpld_base) {
+ seq_printf(m, "Hardware rev\t: %d\n",
+ in_8(cpld_base + KSI8560_CPLD_HVR));
+ seq_printf(m, "CPLD rev\t: %d\n",
+ in_8(cpld_base + KSI8560_CPLD_PVR));
+ } else
+ seq_printf(m, "Unknown Hardware and CPLD revs\n");
+
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .type = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(ksi8560, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ksi8560_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "emerson,KSI8560");
+}
+
+define_machine(ksi8560) {
+ .name = "KSI8560",
+ .probe = ksi8560_probe,
+ .setup_arch = ksi8560_setup_arch,
+ .init_IRQ = ksi8560_pic_init,
+ .show_cpuinfo = ksi8560_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = machine_restart,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 4e030509611..3582c841844 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -165,7 +165,7 @@ static void __init init_ioports(void)
int i;
for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
- struct cpm_pin *pin = &mpc8560_ads_pins[i];
+ const struct cpm_pin *pin = &mpc8560_ads_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index bdb3d0b38cd..dfd8b4ad9b2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
+#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -36,7 +37,7 @@
#undef DEBUG
#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define DBG(fmt, args...)
#endif
@@ -183,6 +184,18 @@ static int __init mpc8544_ds_probe(void)
}
}
+static struct of_device_id mpc85xxds_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ {},
+};
+
+static int __init mpc85xxds_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
+}
+machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+
/*
* Called very early, device-tree isn't unflattened
*/
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 21d113536b8..7442c58d44f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -11,6 +11,12 @@ config MPC8641_HPCN
help
This option enables support for the MPC8641 HPCN board.
+config SBC8641D
+ bool "Wind River SBC8641D"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the WRS SBC8641D board.
+
config MPC8610_HPCD
bool "Freescale MPC8610 HPCD"
select DEFAULT_UIMAGE
@@ -24,7 +30,7 @@ config MPC8641
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
- default y if MPC8641_HPCN
+ default y if MPC8641_HPCN || SBC8641D
config MPC8610
bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index c96706327ea..1b9b4a9b252 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,4 +4,5 @@
obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
+obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 0b07485641f..18b8ebe930d 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -52,7 +52,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
}
machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
-void __init
+static void __init
mpc86xx_hpcd_init_irq(void)
{
struct mpic *mpic1;
@@ -200,7 +200,7 @@ static int __init mpc86xx_hpcd_probe(void)
return 0;
}
-long __init
+static long __init
mpc86xx_time_init(void)
{
unsigned int temp;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index cfbe8c52e26..f947f555fd4 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -55,7 +55,7 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
}
#endif /* CONFIG_PCI */
-void __init
+static void __init
mpc86xx_hpcn_init_irq(void)
{
struct mpic *mpic1;
@@ -162,7 +162,7 @@ mpc86xx_hpcn_setup_arch(void)
}
-void
+static void
mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
{
struct device_node *root;
@@ -190,13 +190,19 @@ static int __init mpc86xx_hpcn_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "mpc86xx"))
+ if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn"))
return 1; /* Looks good */
+ /* Be nice and don't give silent boot death. Delete this in 2.6.27 */
+ if (of_flat_dt_is_compatible(root, "mpc86xx")) {
+ pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n");
+ return 1;
+ }
+
return 0;
}
-long __init
+static long __init
mpc86xx_time_init(void)
{
unsigned int temp;
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
new file mode 100644
index 00000000000..510a06ef0b5
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -0,0 +1,164 @@
+/*
+ * SBC8641D board specific routines
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+static void __init
+sbc8641_init_irq(void)
+{
+ struct mpic *mpic1;
+ struct device_node *np;
+ struct resource res;
+
+ /* Determine PIC address. */
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np == NULL)
+ return;
+ of_address_to_resource(np, 0, &res);
+
+ /* Alloc mpic structure and per isu has 16 INT entries. */
+ mpic1 = mpic_alloc(np, res.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " MPIC ");
+ of_node_put(np);
+ BUG_ON(mpic1 == NULL);
+
+ mpic_init(mpic1);
+}
+
+static void __init
+sbc8641_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("sbc8641_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
+ fsl_add_bridge(np, 0);
+#endif
+
+ printk("SBC8641 board from Wind River\n");
+
+#ifdef CONFIG_SMP
+ mpc86xx_smp_init();
+#endif
+}
+
+
+static void
+sbc8641_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ uint memsize = total_memory;
+ const char *model = "";
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Wind River Systems\n");
+
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ seq_printf(m, "Machine\t\t: %s\n", model);
+ of_node_put(root);
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init sbc8641_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "wind,sbc8641"))
+ return 1; /* Looks good */
+
+ return 0;
+}
+
+static long __init
+mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(sbc8641, declare_of_platform_devices);
+
+define_machine(sbc8641) {
+ .name = "SBC8641D",
+ .probe = sbc8641_probe,
+ .setup_arch = sbc8641_setup_arch,
+ .init_IRQ = sbc8641_init_irq,
+ .show_cpuinfo = sbc8641_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 7fd224ca233..6fc849e51e4 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -18,7 +18,6 @@ config MPC8XXFADS
config MPC86XADS
bool "MPC86XADS"
select CPM1
- select PPC_CPM_NEW_BINDING
help
MPC86x Application Development System by Freescale Semiconductor.
The MPC86xADS is meant to serve as a platform for s/w and h/w
@@ -27,7 +26,6 @@ config MPC86XADS
config MPC885ADS
bool "MPC885ADS"
select CPM1
- select PPC_CPM_NEW_BINDING
help
Freescale Semiconductor MPC885 Application Development System (ADS).
Also known as DUET.
@@ -37,7 +35,6 @@ config MPC885ADS
config PPC_EP88XC
bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
select CPM1
- select PPC_CPM_NEW_BINDING
help
This enables support for the Embedded Planet EP88xC board.
@@ -47,7 +44,6 @@ config PPC_EP88XC
config PPC_ADDER875
bool "Analogue & Micro Adder 875"
select CPM1
- select PPC_CPM_NEW_BINDING
select REDBOOT
help
This enables support for the Analogue & Micro Adder 875
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 184f998d1be..0d9f75c74f8 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -111,17 +111,12 @@ void __init mpc8xx_calibrate_decr(void)
/* Processor frequency is MHz.
*/
- ppc_tb_freq = 50000000;
- if (!get_freq("bus-frequency", &ppc_tb_freq)) {
- printk(KERN_ERR "WARNING: Estimating decrementer frequency "
- "(not found)\n");
- }
- ppc_tb_freq /= 16;
ppc_proc_freq = 50000000;
if (!get_freq("clock-frequency", &ppc_proc_freq))
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
+ ppc_tb_freq = ppc_proc_freq / 16;
printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
/* Perform some more timer/timebase initialization. This used
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index a578b966ecb..f38c50b4ce5 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -290,13 +290,7 @@ config CPM2
config PPC_CPM_NEW_BINDING
bool
depends on CPM1 || CPM2
- help
- Select this if your board has been converted to use the new
- device tree bindings for CPM, and no longer needs the
- ioport callbacks or the platform device glue code.
-
- The fs_enet and cpm_uart drivers will be built as
- of_platform devices.
+ default y
config AXON_RAM
tristate "Axon DDR2 memory device driver"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 0c3face0ddb..5fc7fac10e9 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -41,11 +41,13 @@ config 40x
bool "AMCC 40x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
+ select 4xx_SOC
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
+ select 4xx_SOC
config E200
bool "Freescale e200"
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index d75ccded7f1..45646b2b4af 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -28,13 +28,13 @@
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/udbg.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/cell-regs.h>
@@ -316,7 +316,7 @@ static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
pr_debug("%s: iommu[%d]: segments: %lu\n",
- __FUNCTION__, iommu->nid, segments);
+ __func__, iommu->nid, segments);
/* set up the segment table */
stab_size = segments * sizeof(unsigned long);
@@ -343,7 +343,7 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
(1 << 12) / sizeof(unsigned long));
ptab_size = segments * pages_per_segment * sizeof(unsigned long);
- pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
+ pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
iommu->nid, ptab_size, get_order(ptab_size));
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
BUG_ON(!page);
@@ -355,7 +355,7 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
- __FUNCTION__, iommu->nid, iommu->stab, ptab,
+ __func__, iommu->nid, iommu->stab, ptab,
n_pte_pages);
/* initialise the STEs */
@@ -394,7 +394,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
panic("%s: missing IOC register mappings for node %d\n",
- __FUNCTION__, iommu->nid);
+ __func__, iommu->nid);
iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 0304589c0a8..8a3631ce912 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -65,7 +65,7 @@ static void cbe_power_save(void)
break;
default:
printk(KERN_WARNING "%s: unknown configuration\n",
- __FUNCTION__);
+ __func__);
break;
}
mtspr(SPRN_TSC_CELL, thread_switch_control);
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index e43024c0392..655704ad03c 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -132,7 +132,7 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
(unsigned int)(addr >> 32),
(unsigned int)(addr & 0xffffffff))) {
printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
- __FUNCTION__, nid);
+ __func__, nid);
goto out_free_pages;
}
@@ -162,7 +162,7 @@ static int __init cbe_ptcal_enable(void)
if (!size)
return -ENODEV;
- pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
+ pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size);
order = get_order(*size);
of_node_put(np);
@@ -180,7 +180,7 @@ static int __init cbe_ptcal_enable(void)
const u32 *nid = of_get_property(np, "node-id", NULL);
if (!nid) {
printk(KERN_ERR "%s: node %s is missing node-id?\n",
- __FUNCTION__, np->full_name);
+ __func__, np->full_name);
continue;
}
cbe_ptcal_enable_on_node(*nid, order);
@@ -195,13 +195,13 @@ static int cbe_ptcal_disable(void)
struct ptcal_area *area, *tmp;
int ret = 0;
- pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
+ pr_debug("%s: disabling PTCAL\n", __func__);
list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
/* disable ptcal on this node */
if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
printk(KERN_ERR "%s: error disabling PTCAL "
- "on node %d!\n", __FUNCTION__,
+ "on node %d!\n", __func__,
area->nid);
ret = -EIO;
continue;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 712001f6b7d..6bab44b7716 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -165,7 +165,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
struct spu_slb slb;
int psize;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
@@ -215,7 +215,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
- pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
+ pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
/* Handle kernel space hash faults immediately.
User hash faults need to be deferred to process context. */
@@ -351,7 +351,7 @@ spu_irq_class_1(int irq, void *data)
__spu_trap_data_seg(spu, dar);
spin_unlock(&spu->register_lock);
- pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+ pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
dar, dsisr);
if (stat & CLASS1_STORAGE_FAULT_INTR)
@@ -726,7 +726,7 @@ static int __init init_spu_base(void)
if (ret < 0) {
printk(KERN_WARNING "%s: Error initializing spus\n",
- __FUNCTION__);
+ __func__);
goto out_unregister_sysdev_class;
}
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index dceb8b6a938..19f6bfdbb93 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -54,7 +54,7 @@ long spu_sys_callback(struct spu_syscall_block *s)
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
- pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+ pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
return -ENOSYS;
}
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index d351bdebf5f..4c506c1463c 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -92,7 +92,7 @@ static int __init spu_map_interrupts_old(struct spu *spu,
tmp = of_get_property(np->parent->parent, "node-id", NULL);
if (!tmp) {
- printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: can't find node-id\n", __func__);
nid = spu->node;
} else
nid = tmp[0];
@@ -296,7 +296,7 @@ static int __init of_enumerate_spus(int (*fn)(void *data))
ret = fn(node);
if (ret) {
printk(KERN_WARNING "%s: Error initializing %s\n",
- __FUNCTION__, node->name);
+ __func__, node->name);
break;
}
n++;
@@ -327,7 +327,7 @@ static int __init of_create_spu(struct spu *spu, void *data)
if (!legacy_map) {
legacy_map = 1;
printk(KERN_WARNING "%s: Legacy device tree found, "
- "trying to map old style\n", __FUNCTION__);
+ "trying to map old style\n", __func__);
}
ret = spu_map_device_old(spu);
if (ret) {
@@ -342,7 +342,7 @@ static int __init of_create_spu(struct spu *spu, void *data)
if (!legacy_irq) {
legacy_irq = 1;
printk(KERN_WARNING "%s: Legacy device tree found, "
- "trying old style irq\n", __FUNCTION__);
+ "trying old style irq\n", __func__);
}
ret = spu_map_interrupts_old(spu, spe);
if (ret) {
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index 0c6a96b82b2..b962c3ab470 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -133,8 +133,6 @@ static struct spu_context *coredump_next_context(int *fd)
if (ctx->flags & SPU_CREATE_NOSCHED)
continue;
- /* start searching the next fd next time we're called */
- (*fd)++;
break;
}
@@ -157,6 +155,9 @@ int spufs_coredump_extra_notes_size(void)
break;
size += rc;
+
+ /* start searching the next fd next time */
+ fd++;
}
return size;
@@ -239,6 +240,9 @@ int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset)
}
spu_release_saved(ctx);
+
+ /* start searching the next fd next time */
+ fd++;
}
return 0;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c7df0a6cfa1..08f44d1971a 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1336,7 +1336,7 @@ static u64 spufs_signal1_type_get(struct spu_context *ctx)
return ctx->ops->signal1_type_get(ctx);
}
DEFINE_SPUFS_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get,
- spufs_signal1_type_set, "%llu", SPU_ATTR_ACQUIRE);
+ spufs_signal1_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
static int spufs_signal2_type_set(void *data, u64 val)
@@ -1358,7 +1358,7 @@ static u64 spufs_signal2_type_get(struct spu_context *ctx)
return ctx->ops->signal2_type_get(ctx);
}
DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
- spufs_signal2_type_set, "%llu", SPU_ATTR_ACQUIRE);
+ spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
#if SPUFS_MMAP_4K
static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
@@ -1555,7 +1555,7 @@ void spufs_mfc_callback(struct spu *spu)
wake_up_all(&ctx->mfc_wq);
- pr_debug("%s %s\n", __FUNCTION__, spu->name);
+ pr_debug("%s %s\n", __func__, spu->name);
if (ctx->mfc_fasync) {
u32 free_elements, tagstatus;
unsigned int mask;
@@ -1789,7 +1789,7 @@ static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait)
if (tagstatus & ctx->tagwait)
mask |= POLLIN | POLLRDNORM;
- pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+ pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__,
free_elements, tagstatus, ctx->tagwait);
return mask;
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index cac69e11677..96bf7c2b86f 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -98,7 +98,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
!= MFC_CNTL_PURGE_DMA_COMPLETE) {
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
- __FUNCTION__);
+ __func__);
ret = -EIO;
goto out;
}
@@ -124,7 +124,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
status_loading) {
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: timeout waiting for loader\n",
- __FUNCTION__);
+ __func__);
ret = -EIO;
goto out_drop_priv;
}
@@ -134,7 +134,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
if (!(status & SPU_STATUS_RUNNING)) {
/* If isolated LOAD has failed: run SPU, we will get a stop-and
* signal later. */
- pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
+ pr_debug("%s: isolated LOAD failed\n", __func__);
ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
ret = -EACCES;
goto out_drop_priv;
@@ -142,7 +142,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
if (!(status & SPU_STATUS_ISOLATED_STATE)) {
/* This isn't allowed by the CBEA, but check anyway */
- pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
+ pr_debug("%s: SPU fell out of isolated mode?\n", __func__);
ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
ret = -EINVAL;
goto out_drop_priv;
@@ -282,7 +282,7 @@ static int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret,
break;
default:
printk(KERN_WARNING "%s: unexpected return code %ld\n",
- __FUNCTION__, *spu_ret);
+ __func__, *spu_ret);
ret = 0;
}
return ret;
@@ -323,6 +323,10 @@ static int spu_process_callback(struct spu_context *ctx)
return -EINTR;
}
+ /* need to re-get the ls, as it may have changed when we released the
+ * spu */
+ ls = (void __iomem *)ctx->ops->get_ls(ctx);
+
/* write result, jump over indirect pointer */
memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret));
ctx->ops->npc_write(ctx, npc);
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index e9dc7a55d1b..d2a1249d36d 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -1815,6 +1815,7 @@ static void save_csa(struct spu_state *prev, struct spu *spu)
save_mfc_csr_ato(prev, spu); /* Step 24. */
save_mfc_tclass_id(prev, spu); /* Step 25. */
set_mfc_tclass_id(prev, spu); /* Step 26. */
+ save_mfc_cmd(prev, spu); /* Step 26a - moved from 44. */
purge_mfc_queue(prev, spu); /* Step 27. */
wait_purge_complete(prev, spu); /* Step 28. */
setup_mfc_sr1(prev, spu); /* Step 30. */
@@ -1831,7 +1832,6 @@ static void save_csa(struct spu_state *prev, struct spu *spu)
save_ppuint_mb(prev, spu); /* Step 41. */
save_ch_part1(prev, spu); /* Step 42. */
save_spu_mb(prev, spu); /* Step 43. */
- save_mfc_cmd(prev, spu); /* Step 44. */
reset_ch(prev, spu); /* Step 45. */
}
diff --git a/arch/powerpc/platforms/celleb/beat.c b/arch/powerpc/platforms/celleb/beat.c
index 93ebb7d8512..b64b171f245 100644
--- a/arch/powerpc/platforms/celleb/beat.c
+++ b/arch/powerpc/platforms/celleb/beat.c
@@ -48,6 +48,7 @@ void beat_power_off(void)
}
u64 beat_halt_code = 0x1000000000000000UL;
+EXPORT_SYMBOL(beat_halt_code);
void beat_halt(void)
{
@@ -94,9 +95,8 @@ ssize_t beat_nvram_read(char *buf, size_t count, loff_t *index)
len = count;
if (len > BEAT_NVRW_CNT)
len = BEAT_NVRW_CNT;
- if (beat_eeprom_read(i, len, p)) {
+ if (beat_eeprom_read(i, len, p))
return -EIO;
- }
p += len;
i += len;
@@ -121,9 +121,8 @@ ssize_t beat_nvram_write(char *buf, size_t count, loff_t *index)
len = count;
if (len > BEAT_NVRW_CNT)
len = BEAT_NVRW_CNT;
- if (beat_eeprom_write(i, len, p)) {
+ if (beat_eeprom_write(i, len, p))
return -EIO;
- }
p += len;
i += len;
@@ -149,13 +148,14 @@ int64_t beat_get_term_char(u64 vterm, u64 *len, u64 *t1, u64 *t2)
u64 db[2];
s64 ret;
- ret = beat_get_characters_from_console(vterm, len, (u8*)db);
+ ret = beat_get_characters_from_console(vterm, len, (u8 *)db);
if (ret == 0) {
*t1 = db[0];
*t2 = db[1];
}
return ret;
}
+EXPORT_SYMBOL(beat_get_term_char);
int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
{
@@ -163,8 +163,9 @@ int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
db[0] = t1;
db[1] = t2;
- return beat_put_characters_to_console(vterm, len, (u8*)db);
+ return beat_put_characters_to_console(vterm, len, (u8 *)db);
}
+EXPORT_SYMBOL(beat_put_term_char);
void beat_power_save(void)
{
@@ -261,7 +262,3 @@ static int __init beat_event_init(void)
}
device_initcall(beat_event_init);
-
-EXPORT_SYMBOL(beat_get_term_char);
-EXPORT_SYMBOL(beat_put_term_char);
-EXPORT_SYMBOL(beat_halt_code);
diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h
index ac82ac35b99..32c8efcedc8 100644
--- a/arch/powerpc/platforms/celleb/beat.h
+++ b/arch/powerpc/platforms/celleb/beat.h
@@ -21,8 +21,8 @@
#ifndef _CELLEB_BEAT_H
#define _CELLEB_BEAT_H
-int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
-int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
+int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
+int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
int64_t beat_repository_encode(int, const char *, uint64_t[4]);
void beat_restart(char *);
void beat_power_off(void);
diff --git a/arch/powerpc/platforms/celleb/beat_wrapper.h b/arch/powerpc/platforms/celleb/beat_wrapper.h
index cbc1487df7d..b47dfda48d0 100644
--- a/arch/powerpc/platforms/celleb/beat_wrapper.h
+++ b/arch/powerpc/platforms/celleb/beat_wrapper.h
@@ -197,7 +197,8 @@ static inline s64 beat_put_characters_to_console(u64 termno, u64 len,
u64 b[2];
memcpy(b, buffer, len);
- return beat_hcall_norets(HV_put_characters_to_console, termno, len, b[0], b[1]);
+ return beat_hcall_norets(HV_put_characters_to_console, termno, len,
+ b[0], b[1]);
}
static inline s64 beat_get_spe_privileged_state_1_registers(
diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c
index fbf27c74ebd..81467ff055c 100644
--- a/arch/powerpc/platforms/celleb/htab.c
+++ b/arch/powerpc/platforms/celleb/htab.c
@@ -35,9 +35,9 @@
#include "beat_wrapper.h"
#ifdef DEBUG_LOW
-#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
+#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0)
#else
-#define DBG_LOW(fmt...) do { } while(0)
+#define DBG_LOW(fmt...) do { } while (0)
#endif
static DEFINE_SPINLOCK(beat_htab_lock);
@@ -116,7 +116,8 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
hpte_r &= ~_PAGE_COHERENT;
spin_lock(&beat_htab_lock);
- if ((lpar_rc = beat_read_mask(hpte_group)) == 0) {
+ lpar_rc = beat_read_mask(hpte_group);
+ if (lpar_rc == 0) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" full\n");
spin_unlock(&beat_htab_lock);
diff --git a/arch/powerpc/platforms/celleb/interrupt.c b/arch/powerpc/platforms/celleb/interrupt.c
index c7c68ca70c8..69562a86787 100644
--- a/arch/powerpc/platforms/celleb/interrupt.c
+++ b/arch/powerpc/platforms/celleb/interrupt.c
@@ -34,7 +34,7 @@ static DEFINE_SPINLOCK(beatic_irq_mask_lock);
static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64];
static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64];
-static struct irq_host *beatic_host = NULL;
+static struct irq_host *beatic_host;
/*
* In this implementation, "virq" == "IRQ plug number",
@@ -49,13 +49,13 @@ static inline void beatic_update_irq_mask(unsigned int irq_plug)
off = (irq_plug / 256) * 4;
masks[0] = beatic_irq_mask_enable[off + 0]
- & beatic_irq_mask_ack[off + 0];
+ & beatic_irq_mask_ack[off + 0];
masks[1] = beatic_irq_mask_enable[off + 1]
- & beatic_irq_mask_ack[off + 1];
+ & beatic_irq_mask_ack[off + 1];
masks[2] = beatic_irq_mask_enable[off + 2]
- & beatic_irq_mask_ack[off + 2];
+ & beatic_irq_mask_ack[off + 2];
masks[3] = beatic_irq_mask_enable[off + 3]
- & beatic_irq_mask_ack[off + 3];
+ & beatic_irq_mask_ack[off + 3];
if (beat_set_interrupt_mask(irq_plug&~255UL,
masks[0], masks[1], masks[2], masks[3]) != 0)
panic("Failed to set mask IRQ!");
@@ -96,7 +96,8 @@ static void beatic_end_irq(unsigned int irq_plug)
s64 err;
unsigned long flags;
- if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) {
+ err = beat_downcount_of_interrupt(irq_plug);
+ if (err != 0) {
if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
panic("Failed to downcount IRQ! Error = %16lx", err);
@@ -138,7 +139,8 @@ static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
struct irq_desc *desc = get_irq_desc(virq);
int64_t err;
- if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0)
+ err = beat_construct_and_connect_irq_plug(virq, hw);
+ if (err < 0)
return -EIO;
desc->status |= IRQ_LEVEL;
@@ -202,22 +204,22 @@ static inline unsigned int beatic_get_irq_plug(void)
beat_detect_pending_interrupts(i, pending);
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[0] & beatic_irq_mask_enable[i/64+0]
- & beatic_irq_mask_ack[i/64+0]));
+ & beatic_irq_mask_ack[i/64+0]));
if (ub != 64)
return i + ub + 0;
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[1] & beatic_irq_mask_enable[i/64+1]
- & beatic_irq_mask_ack[i/64+1]));
+ & beatic_irq_mask_ack[i/64+1]));
if (ub != 64)
return i + ub + 64;
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[2] & beatic_irq_mask_enable[i/64+2]
- & beatic_irq_mask_ack[i/64+2]));
+ & beatic_irq_mask_ack[i/64+2]));
if (ub != 64)
return i + ub + 128;
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[3] & beatic_irq_mask_enable[i/64+3]
- & beatic_irq_mask_ack[i/64+3]));
+ & beatic_irq_mask_ack[i/64+3]));
if (ub != 64)
return i + ub + 192;
}
@@ -250,7 +252,7 @@ void __init beatic_init_IRQ(void)
/* Allocate an irq host */
beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
- &beatic_pic_host_ops,
+ &beatic_pic_host_ops,
0);
BUG_ON(beatic_host == NULL);
irq_set_default_host(beatic_host);
diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c
index a3c7cfbcb32..a999b393f6f 100644
--- a/arch/powerpc/platforms/celleb/scc_epci.c
+++ b/arch/powerpc/platforms/celleb/scc_epci.c
@@ -161,9 +161,9 @@ static PCI_IO_ADDR celleb_epci_make_config_addr(
if (bus != hose->bus)
addr = celleb_epci_get_epci_cfg(hose) +
(((bus->number & 0xff) << 16)
- | ((devfn & 0xff) << 8)
- | (where & 0xff)
- | 0x01000000);
+ | ((devfn & 0xff) << 8)
+ | (where & 0xff)
+ | 0x01000000);
else
addr = celleb_epci_get_epci_cfg(hose) +
(((devfn & 0xff) << 8) | (where & 0xff));
@@ -174,7 +174,7 @@ static PCI_IO_ADDR celleb_epci_make_config_addr(
}
static int celleb_epci_read_config(struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 * val)
+ unsigned int devfn, int where, int size, u32 *val)
{
PCI_IO_ADDR epci_base;
PCI_IO_ADDR addr;
diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/celleb/scc_sio.c
index 610008211ca..3a16c5b3c46 100644
--- a/arch/powerpc/platforms/celleb/scc_sio.c
+++ b/arch/powerpc/platforms/celleb/scc_sio.c
@@ -28,7 +28,7 @@
/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
mmio=0xfff000-0x1000,0xff2000-0x1000 */
-static int txx9_serial_bitmap __initdata = 0;
+static int txx9_serial_bitmap __initdata;
static struct {
uint32_t offset;
@@ -84,7 +84,7 @@ static int __init txx9_serial_config(char *ptr)
int i;
for (;;) {
- switch(get_option(&ptr, &i)) {
+ switch (get_option(&ptr, &i)) {
default:
return 0;
case 2:
diff --git a/arch/powerpc/platforms/celleb/spu_priv1.c b/arch/powerpc/platforms/celleb/spu_priv1.c
index 2bf6700f747..bcc17f7fe8a 100644
--- a/arch/powerpc/platforms/celleb/spu_priv1.c
+++ b/arch/powerpc/platforms/celleb/spu_priv1.c
@@ -183,8 +183,7 @@ static u64 resource_allocation_enable_get(struct spu *spu)
return enable;
}
-const struct spu_priv1_ops spu_priv1_beat_ops =
-{
+const struct spu_priv1_ops spu_priv1_beat_ops = {
.int_mask_and = int_mask_and,
.int_mask_or = int_mask_or,
.int_mask_set = int_mask_set,
diff --git a/arch/powerpc/platforms/celleb/udbg_beat.c b/arch/powerpc/platforms/celleb/udbg_beat.c
index d888c4674c6..6b418f6b617 100644
--- a/arch/powerpc/platforms/celleb/udbg_beat.c
+++ b/arch/powerpc/platforms/celleb/udbg_beat.c
@@ -54,7 +54,8 @@ static int udbg_getc_poll_beat(void)
if (inbuflen == 0) {
/* get some more chars. */
inbuflen = 0;
- rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1);
+ rc = beat_get_term_char(celleb_vtermno, &inbuflen,
+ inbuf+0, inbuf+1);
if (rc != 0)
inbuflen = 0; /* otherwise inbuflen is garbage */
}
@@ -78,7 +79,7 @@ static int udbg_getc_beat(void)
if (ch == -1) {
/* This shouldn't be needed...but... */
volatile unsigned long delay;
- for (delay=0; delay < 2000000; delay++)
+ for (delay = 0; delay < 2000000; delay++)
;
} else {
return ch;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d4f8bf581e3..84e2d78b9a6 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -117,11 +117,11 @@ static void __init mpc7448_hpc2_init_IRQ(void)
}
if (mpic_paddr == 0) {
- printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+ printk("%s: No tsi108 PIC found !\n", __func__);
return;
}
- DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
+ DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
(u32) mpic_paddr);
mpic = mpic_alloc(tsi_pic, mpic_paddr,
@@ -140,17 +140,17 @@ static void __init mpc7448_hpc2_init_IRQ(void)
#ifdef CONFIG_PCI
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == NULL) {
- printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+ printk("%s: No tsi108 pci node found !\n", __func__);
return;
}
cascade_node = of_find_node_by_type(NULL, "pic-router");
if (cascade_node == NULL) {
- printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
+ printk("%s: No tsi108 pci cascade node found !\n", __func__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
- DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
+ DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
(u32) cascade_pci_irq);
tsi108_pci_int_init(cascade_node);
set_irq_data(cascade_pci_irq, mpic);
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 653a5eb91c9..5a19b9a1457 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(void)
* ioremap mpp and gpp registers in case they are later
* needed by prpmc2800_reset_board().
*/
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 5381038f088..c775cd4b3d6 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -38,11 +38,19 @@
.globl system_reset_iSeries
system_reset_iSeries:
- mfspr r13,SPRN_SPRG3 /* Get paca address */
+ mfspr r13,SPRN_SPRG3 /* Get alpaca address */
+ LOAD_REG_IMMEDIATE(r23, alpaca)
+ li r0,ALPACA_SIZE
+ sub r23,r13,r23
+ divdu r23,r23,r0 /* r23 has cpu number */
+ LOAD_REG_IMMEDIATE(r13, paca)
+ mulli r0,r23,PACA_SIZE
+ add r13,r13,r0
+ mtspr SPRN_SPRG3,r13 /* Save it away for the future */
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
- lhz r24,PACAPACAINDEX(r13) /* Get processor # */
+ mr r24,r23
cmpwi 0,r24,0 /* Are we processor 0? */
bne 1f
b .__start_initialization_iSeries /* Start up the first processor */
diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h
index 77c135ddbf1..83e4ca42fc5 100644
--- a/arch/powerpc/platforms/iseries/ipl_parms.h
+++ b/arch/powerpc/platforms/iseries/ipl_parms.h
@@ -65,6 +65,4 @@ struct ItIplParmsReal {
u64 xRsvd13; // Reserved x38-x3F
};
-extern struct ItIplParmsReal xItIplParmsReal;
-
#endif /* _ISERIES_IPL_PARMS_H */
diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c
index 8162049bb04..98bd2d37038 100644
--- a/arch/powerpc/platforms/iseries/lpardata.c
+++ b/arch/powerpc/platforms/iseries/lpardata.c
@@ -14,10 +14,10 @@
#include <asm/ptrace.h>
#include <asm/abs_addr.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/iseries/lpar_map.h>
#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/alpaca.h>
#include "naca.h"
#include "vpd_areas.h"
@@ -31,7 +31,7 @@
/* The HvReleaseData is the root of the information shared between
* the hypervisor and Linux.
*/
-struct HvReleaseData hvReleaseData = {
+const struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
@@ -61,6 +61,63 @@ struct naca_struct naca = {
.xRamDiskSize = 0,
};
+struct ItLpRegSave {
+ u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
+ u16 xSize; // Size of this class 004-005
+ u8 xInUse; // Area is live 006-007
+ u8 xRsvd1[9]; // Reserved 007-00F
+
+ u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
+ u32 xCTRL; // Control Register 170-173
+ u32 xDEC; // Decrementer 174-177
+ u32 xFPSCR; // FP Status and Control Reg 178-17B
+ u32 xPVR; // Processor Version Number 17C-17F
+
+ u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
+ u32 xPMC1; // Perf Monitor Counter 1 188-18B
+ u32 xPMC2; // Perf Monitor Counter 2 18C-18F
+ u32 xPMC3; // Perf Monitor Counter 3 190-193
+ u32 xPMC4; // Perf Monitor Counter 4 194-197
+ u32 xPIR; // Processor ID Reg 198-19B
+
+ u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
+ u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
+ u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
+ u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
+ u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
+ u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
+ u32 xTSC; // Thread Switch Control 1B4-1B7
+ u32 xTST; // Thread Switch Timeout 1B8-1BB
+ u32 xRsvd; // Reserved 1BC-1BF
+
+ u64 xACCR; // Address Compare Control Reg 1C0-1C7
+ u64 xIMR; // Instruction Match Register 1C8-1CF
+ u64 xSDR1; // Storage Description Reg 1 1D0-1D7
+ u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
+ u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
+ u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
+ u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
+ u64 xTB; // Time Base Register 1F8-1FF
+
+ u64 xFPR[32]; // Floating Point Registers 200-2FF
+
+ u64 xMSR; // Machine State Register 300-307
+ u64 xNIA; // Next Instruction Address 308-30F
+
+ u64 xDABR; // Data Address Breakpoint Reg 310-317
+ u64 xIABR; // Inst Address Breakpoint Reg 318-31F
+
+ u64 xHID0; // HW Implementation Dependent0 320-327
+
+ u64 xHID4; // HW Implementation Dependent4 328-32F
+ u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
+ u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
+ u64 xSDAR; // Sample Data Address Register 340-347
+ u64 xSIAR; // Sample Inst Address Register 348-34F
+
+ u8 xRsvd3[176]; // Reserved 350-3FF
+};
+
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
extern void data_access_iSeries(void);
@@ -129,7 +186,7 @@ struct ItLpNaca itLpNaca = {
};
/* May be filled in by the hypervisor so cannot end up in the BSS */
-struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
+static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
/* May be filled in by the hypervisor so cannot end up in the BSS */
struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data")));
@@ -152,13 +209,54 @@ u64 xMsVpd[3400] __attribute__((__section__(".data")));
/* Space for Recovery Log Buffer */
/* May be filled in by the hypervisor so cannot end up in the BSS */
-u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
+static u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
-struct SpCommArea xSpCommArea = {
+static const struct SpCommArea xSpCommArea = {
.xDesc = 0xE2D7C3C2,
.xFormat = 1,
};
+static const struct ItLpRegSave iseries_reg_save[] = {
+ [0 ... (NR_CPUS-1)] = {
+ .xDesc = 0xd397d9e2, /* "LpRS" */
+ .xSize = sizeof(struct ItLpRegSave),
+ },
+};
+
+#define ALPACA_INIT(number) \
+{ \
+ .lppaca_ptr = &lppaca[number], \
+ .reg_save_ptr = &iseries_reg_save[number], \
+}
+
+const struct alpaca alpaca[] = {
+ ALPACA_INIT( 0),
+#if NR_CPUS > 1
+ ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3),
+#if NR_CPUS > 4
+ ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7),
+#if NR_CPUS > 8
+ ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11),
+ ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15),
+ ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19),
+ ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23),
+ ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27),
+ ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31),
+#if NR_CPUS > 32
+ ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35),
+ ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39),
+ ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43),
+ ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47),
+ ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51),
+ ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55),
+ ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59),
+ ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63),
+#endif
+#endif
+#endif
+#endif
+};
+
/* The LparMap data is now located at offset 0x6000 in head.S
* It was put there so that the HvReleaseData could address it
* with a 32-bit offset as required by the iSeries hypervisor
@@ -167,7 +265,7 @@ struct SpCommArea xSpCommArea = {
* the Naca via the HvReleaseData area. The HvReleaseData has the
* offset into the Naca of the pointer to the ItVpdAreas.
*/
-struct ItVpdAreas itVpdAreas = {
+const struct ItVpdAreas itVpdAreas = {
.xSlicDesc = 0xc9a3e5c1, /* "ItVA" */
.xSlicSize = sizeof(struct ItVpdAreas),
.xSlicVpdEntries = ItVpdMaxEntries, /* # VPD array entries */
@@ -185,7 +283,7 @@ struct ItVpdAreas itVpdAreas = {
.xSlicVpdLens = { /* VPD lengths */
0,0,0, /* 0 - 2 */
sizeof(xItExtVpdPanel), /* 3 Extended VPD */
- sizeof(struct paca_struct), /* 4 length of Paca */
+ sizeof(struct alpaca), /* 4 length of (fake) Paca */
0, /* 5 */
sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */
26992, /* 7 length of MS VPD */
@@ -203,7 +301,7 @@ struct ItVpdAreas itVpdAreas = {
.xSlicVpdAdrs = { /* VPD addresses */
0,0,0, /* 0 - 2 */
&xItExtVpdPanel, /* 3 Extended VPD */
- &paca[0], /* 4 first Paca */
+ &alpaca[0], /* 4 first (fake) Paca */
0, /* 5 */
&xItIplParmsReal, /* 6 IPL parms */
&xMsVpd, /* 7 MS Vpd */
@@ -219,10 +317,3 @@ struct ItVpdAreas itVpdAreas = {
0,0
}
};
-
-struct ItLpRegSave iseries_reg_save[] = {
- [0 ... (NR_CPUS-1)] = {
- .xDesc = 0xd397d9e2, /* "LpRS" */
- .xSize = sizeof(struct ItLpRegSave),
- },
-};
diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h
index ab2372eb8d2..f01708e1286 100644
--- a/arch/powerpc/platforms/iseries/naca.h
+++ b/arch/powerpc/platforms/iseries/naca.h
@@ -14,7 +14,7 @@
struct naca_struct {
/* Kernel only data - undefined for user space */
- void *xItVpdAreas; /* VPD Data 0x00 */
+ const void *xItVpdAreas; /* VPD Data 0x00 */
void *xRamDisk; /* iSeries ramdisk 0x08 */
u64 xRamDiskSize; /* In pages 0x10 */
};
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index cc562e4c2f3..02a634faedb 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -23,6 +23,7 @@
#undef DEBUG
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
@@ -586,7 +587,7 @@ static inline struct device_node *xlate_iomm_address(
static unsigned long last_jiffies;
static int num_printed;
- if ((jiffies - last_jiffies) > 60 * HZ) {
+ if (time_after(jiffies, last_jiffies + 60 * HZ)) {
last_jiffies = jiffies;
num_printed = 0;
}
diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h
index 66189fd2e32..6ad7d843e8f 100644
--- a/arch/powerpc/platforms/iseries/release_data.h
+++ b/arch/powerpc/platforms/iseries/release_data.h
@@ -58,6 +58,6 @@ struct HvReleaseData {
char xRsvd3[20]; /* Reserved x2C-x3F */
};
-extern struct HvReleaseData hvReleaseData;
+extern const struct HvReleaseData hvReleaseData;
#endif /* _ISERIES_RELEASE_DATA_H */
diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h
index 6e3b685115c..598b7c14573 100644
--- a/arch/powerpc/platforms/iseries/spcomm_area.h
+++ b/arch/powerpc/platforms/iseries/spcomm_area.h
@@ -31,6 +31,4 @@ struct SpCommArea {
u8 xRsvd2[80]; // Reserved 030-07F
};
-extern struct SpCommArea xSpCommArea;
-
#endif /* _ISERIES_SPCOMM_AREA_H */
diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h
index 601e6dd860e..feb001f3a5f 100644
--- a/arch/powerpc/platforms/iseries/vpd_areas.h
+++ b/arch/powerpc/platforms/iseries/vpd_areas.h
@@ -80,9 +80,9 @@ struct ItVpdAreas {
u32 xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths 080-0A7
u32 xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens 0A8-0CF
u32 xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths 0D0-12F
- void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF
+ const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF
};
-extern struct ItVpdAreas itVpdAreas;
+extern const struct ItVpdAreas itVpdAreas;
#endif /* _ISERIES_VPD_AREAS_H */
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 3ffa0ac170e..301855263b8 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -592,50 +592,3 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
}
return irq;
}
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
- if (!machine_is(maple))
- return;
-
-#if 0 /* Enable this to enable IDE port 0 */
- {
- u8 v;
-
- pci_read_config_byte(dev, 0x40, &v);
- v |= 2;
- pci_write_config_byte(dev, 0x40, v);
- }
-#endif
-#if 0 /* fix bus master base */
- pci_write_config_dword(dev, 0x20, 0xcc01);
- printk("old ide resource: %lx -> %lx \n",
- dev->resource[4].start, dev->resource[4].end);
- dev->resource[4].start = 0xcc00;
- dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
- {
- struct pci_dev *apicdev;
- u32 v;
-
- apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
- if (apicdev == NULL)
- printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
- else {
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_dev_put(apicdev);
- }
- }
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
- fixup_maple_ide);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3ce2d73b417..364714757cf 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -43,6 +43,7 @@
#include <linux/smp.h>
#include <linux/bitops.h>
#include <linux/of_device.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/sections.h>
@@ -57,7 +58,6 @@
#include <asm/dma.h>
#include <asm/cputable.h>
#include <asm/time.h>
-#include <asm/lmb.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
#include <asm/udbg.h>
@@ -319,7 +319,7 @@ static int __init maple_probe(void)
return 1;
}
-define_machine(maple_md) {
+define_machine(maple) {
.name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index c529d8dff39..217af321b0c 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -17,6 +17,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -26,6 +27,8 @@
#define MAX_TXCH 64
#define MAX_RXCH 64
+#define MAX_FLAGS 64
+#define MAX_FUN 8
static struct pasdma_status *dma_status;
@@ -43,6 +46,8 @@ static struct pci_dev *dma_pdev;
static DECLARE_BITMAP(txch_free, MAX_TXCH);
static DECLARE_BITMAP(rxch_free, MAX_RXCH);
+static DECLARE_BITMAP(flags_free, MAX_FLAGS);
+static DECLARE_BITMAP(fun_free, MAX_FUN);
/* pasemi_read_iob_reg - read IOB register
* @reg: Register to read (offset into PCI CFG space)
@@ -373,6 +378,106 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
}
EXPORT_SYMBOL(pasemi_dma_free_buf);
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+ *
+ * Allocates a flag for use with channel syncronization (event descriptors).
+ * Returns allocated flag (0-63), < 0 on error.
+ */
+int pasemi_dma_alloc_flag(void)
+{
+ int bit;
+
+retry:
+ bit = find_next_bit(flags_free, MAX_FLAGS, 0);
+ if (bit >= MAX_FLAGS)
+ return -ENOSPC;
+ if (!test_and_clear_bit(bit, flags_free))
+ goto retry;
+
+ return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_flag);
+
+
+/* pasemi_dma_free_flag - Deallocates a flag (event)
+ * @flag: Flag number to deallocate
+ *
+ * Frees up a flag so it can be reused for other purposes.
+ */
+void pasemi_dma_free_flag(int flag)
+{
+ BUG_ON(test_bit(flag, flags_free));
+ BUG_ON(flag >= MAX_FLAGS);
+ set_bit(flag, flags_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_flag);
+
+
+/* pasemi_dma_set_flag - Sets a flag (event) to 1
+ * @flag: Flag number to set active
+ *
+ * Sets the flag provided to 1.
+ */
+void pasemi_dma_set_flag(int flag)
+{
+ BUG_ON(flag >= MAX_FLAGS);
+ if (flag < 32)
+ pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
+ else
+ pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_set_flag);
+
+/* pasemi_dma_clear_flag - Sets a flag (event) to 0
+ * @flag: Flag number to set inactive
+ *
+ * Sets the flag provided to 0.
+ */
+void pasemi_dma_clear_flag(int flag)
+{
+ BUG_ON(flag >= MAX_FLAGS);
+ if (flag < 32)
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
+ else
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_clear_flag);
+
+/* pasemi_dma_alloc_fun - Allocate a function engine
+ *
+ * Allocates a function engine to use for crypto/checksum offload
+ * Returns allocated engine (0-8), < 0 on error.
+ */
+int pasemi_dma_alloc_fun(void)
+{
+ int bit;
+
+retry:
+ bit = find_next_bit(fun_free, MAX_FLAGS, 0);
+ if (bit >= MAX_FLAGS)
+ return -ENOSPC;
+ if (!test_and_clear_bit(bit, fun_free))
+ goto retry;
+
+ return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_fun);
+
+
+/* pasemi_dma_free_fun - Deallocates a function engine
+ * @flag: Engine number to deallocate
+ *
+ * Frees up a function engine so it can be used for other purposes.
+ */
+void pasemi_dma_free_fun(int fun)
+{
+ BUG_ON(test_bit(fun, fun_free));
+ BUG_ON(fun >= MAX_FLAGS);
+ set_bit(fun, fun_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_fun);
+
+
static void *map_onedev(struct pci_dev *p, int index)
{
struct device_node *dn;
@@ -410,6 +515,7 @@ int pasemi_dma_init(void)
struct resource res;
struct device_node *dn;
int i, intf, err = 0;
+ unsigned long timeout;
u32 tmp;
if (!machine_is(pasemi))
@@ -478,6 +584,44 @@ int pasemi_dma_init(void)
for (i = 0; i < MAX_RXCH; i++)
__set_bit(i, rxch_free);
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable RX section\n");
+ break;
+ }
+ }
+
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable TX section\n");
+ break;
+ }
+ }
+
+ /* setup resource allocations for the different DMA sections */
+ tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
+ pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
+
+ /* enable tx section */
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+ /* enable rx section */
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+
+ for (i = 0; i < MAX_FLAGS; i++)
+ __set_bit(i, flags_free);
+
+ for (i = 0; i < MAX_FUN; i++)
+ __set_bit(i, fun_free);
+
+ /* clear all status flags */
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
+
printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
"(%d tx, %d rx channels)\n", num_txch, num_rxch);
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 5803f11c77f..86967bdd877 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2005-2007, PA Semi, Inc
+ * Copyright (C) 2005-2008, PA Semi, Inc
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
@@ -27,7 +27,6 @@
#include <asm/abs_addr.h>
#include <asm/firmware.h>
-
#define IOBMAP_PAGE_SHIFT 12
#define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT)
#define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1)
@@ -35,13 +34,13 @@
#define IOB_BASE 0xe0000000
#define IOB_SIZE 0x3000
/* Configuration registers */
-#define IOBCAP_REG 0x10
-#define IOBCOM_REG 0x40
+#define IOBCAP_REG 0x40
+#define IOBCOM_REG 0x100
/* Enable IOB address translation */
#define IOBCOM_ATEN 0x00000100
/* Address decode configuration register */
-#define IOB_AD_REG 0x53
+#define IOB_AD_REG 0x14c
/* IOBCOM_AD_REG fields */
#define IOB_AD_VGPRT 0x00000e00
#define IOB_AD_VGAEN 0x00000100
@@ -56,13 +55,13 @@
#define IOB_AD_TRNG_2G 0x00000001
#define IOB_AD_TRNG_128G 0x00000003
-#define IOB_TABLEBASE_REG 0x55
+#define IOB_TABLEBASE_REG 0x154
/* Base of the 64 4-byte L1 registers */
-#define IOB_XLT_L1_REGBASE 0xac0
+#define IOB_XLT_L1_REGBASE 0x2b00
/* Register to invalidate TLB entries */
-#define IOB_AT_INVAL_TLB_REG 0xb40
+#define IOB_AT_INVAL_TLB_REG 0x2d00
/* The top two bits of the level 1 entry contains valid and type flags */
#define IOBMAP_L1E_V 0x40000000
@@ -76,7 +75,7 @@
#define IOBMAP_L2E_V 0x80000000
#define IOBMAP_L2E_V_CACHED 0xc0000000
-static u32 __iomem *iob;
+static void __iomem *iob;
static u32 iob_l1_emptyval;
static u32 iob_l2_emptyval;
static u32 *iob_l2_base;
@@ -219,7 +218,7 @@ int __init iob_init(struct device_node *dn)
for (i = 0; i < 64; i++) {
/* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
- out_le32(iob+IOB_XLT_L1_REGBASE+i, regword);
+ out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
}
/* set 2GB translation window, based at 0 */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 2693fc371ea..bf44c5441a3 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -53,6 +53,7 @@
#include <linux/suspend.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/reg.h>
#include <asm/sections.h>
@@ -74,7 +75,6 @@
#include <asm/iommu.h>
#include <asm/smu.h>
#include <asm/pmc.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include "pmac.h"
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 9d251d0ca8c..3866debfa3c 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -499,41 +499,14 @@ static int __init ps3_register_graphics_devices(void)
}
/**
- * ps3_register_repository_device - Register a device from the repositiory info.
- *
+ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
*/
-static int ps3_register_repository_device(
- const struct ps3_repository_device *repo)
+static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
{
int result;
switch (repo->dev_type) {
- case PS3_DEV_TYPE_SB_GELIC:
- result = ps3_setup_gelic_device(repo);
- if (result) {
- pr_debug("%s:%d ps3_setup_gelic_device failed\n",
- __func__, __LINE__);
- }
- break;
- case PS3_DEV_TYPE_SB_USB:
-
- /* Each USB device has both an EHCI and an OHCI HC */
-
- result = ps3_setup_ehci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ehci_device failed\n",
- __func__, __LINE__);
- }
-
- result = ps3_setup_ohci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ohci_device failed\n",
- __func__, __LINE__);
- }
- break;
case PS3_DEV_TYPE_STOR_DISK:
result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
@@ -572,6 +545,48 @@ static int ps3_register_repository_device(
return result;
}
+/**
+ * ps3_setup_static_device - Setup a static device from the repository
+ */
+
+static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
+{
+ int result;
+
+ switch (repo->dev_type) {
+ case PS3_DEV_TYPE_SB_GELIC:
+ result = ps3_setup_gelic_device(repo);
+ if (result) {
+ pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+ case PS3_DEV_TYPE_SB_USB:
+
+ /* Each USB device has both an EHCI and an OHCI HC */
+
+ result = ps3_setup_ehci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+ __func__, __LINE__);
+ }
+
+ result = ps3_setup_ohci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+
+ default:
+ return ps3_setup_dynamic_device(repo);
+ }
+
+ return result;
+}
+
static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
{
struct ps3_repository_device repo;
@@ -601,7 +616,7 @@ found:
pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
__func__, __LINE__, bus_id, dev_id, retries);
- ps3_register_repository_device(&repo);
+ ps3_setup_dynamic_device(&repo);
return;
}
@@ -905,8 +920,7 @@ static int __init ps3_register_devices(void)
ps3_register_graphics_devices();
- ps3_repository_find_devices(PS3_BUS_TYPE_SB,
- ps3_register_repository_device);
+ ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
ps3_register_sound_devices();
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 7382f195c4f..1cf901fa903 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,9 +19,10 @@
*/
#include <linux/kernel.h>
+#include <linux/lmb.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <asm/ps3fb.h>
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 3a6db04aa94..a14e5cdc2fe 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -709,7 +709,7 @@ static unsigned int ps3_get_irq(void)
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
- if (unlikely(plug) == NO_IRQ) {
+ if (unlikely(plug == NO_IRQ)) {
pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 68900476c84..5b3fb2b321a 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,9 +21,10 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
+#include <linux/lmb.h>
#include <asm/firmware.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index b9ea09d9d2f..c73379ec914 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,8 +24,9 @@
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
+#include <linux/lmb.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include "platform.h"
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 5c2cbb08eb5..a413abbd412 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -95,6 +95,14 @@ static void ps3_power_off(void)
ps3_sys_manager_power_off(); /* never returns */
}
+static void ps3_halt(void)
+{
+ DBG("%s:%d\n", __func__, __LINE__);
+
+ smp_send_stop();
+ ps3_sys_manager_halt(); /* never returns */
+}
+
static void ps3_panic(char *str)
{
DBG("%s:%d %s\n", __func__, __LINE__, str);
@@ -105,7 +113,8 @@ static void ps3_panic(char *str)
printk(" Please press POWER button.\n");
printk("\n");
- while(1);
+ while(1)
+ lv1_pause(1);
}
#if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \
@@ -117,7 +126,7 @@ static void __init prealloc(struct ps3_prealloc *p)
p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
if (!p->address) {
- printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: Cannot allocate %s\n", __func__,
p->name);
return;
}
@@ -266,6 +275,7 @@ define_machine(ps3) {
.progress = ps3_progress,
.restart = ps3_restart,
.power_off = ps3_power_off,
+ .halt = ps3_halt,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
.machine_kexec = default_machine_kexec,
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 5ad41189b49..d135cef9ed6 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -27,6 +27,7 @@
#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/lv1call.h>
+#include <asm/ps3.h>
#include "../cell/spufs/spufs.h"
#include "platform.h"
@@ -140,6 +141,12 @@ static void _dump_areas(unsigned int spe_id, unsigned long priv2,
pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow);
}
+inline u64 ps3_get_spe_id(void *arg)
+{
+ return spu_pdata(arg)->spe_id;
+}
+EXPORT_SYMBOL_GPL(ps3_get_spe_id);
+
static unsigned long get_vas_id(void)
{
unsigned long id;
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 992ba6753cf..bdae04bb7a0 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
+obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9eb539ee5f9..550b2f7d2cc 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -945,7 +945,6 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
unsigned int rets[3];
struct eeh_early_enable_info *info = data;
int ret;
- const char *status = of_get_property(dn, "status", NULL);
const u32 *class_code = of_get_property(dn, "class-code", NULL);
const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
const u32 *device_id = of_get_property(dn, "device-id", NULL);
@@ -959,8 +958,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
pdn->eeh_freeze_count = 0;
pdn->eeh_false_positives = 0;
- if (status && strncmp(status, "ok", 2) != 0)
- return NULL; /* ignore devices with bad status */
+ if (!of_device_is_available(dn))
+ return NULL;
/* Ignore bad nodes. */
if (!class_code || !vendor_id || !device_id)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 9a455d46379..9235c469449 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -40,6 +40,7 @@
#include <asm/smp.h>
#include "plpar_wrappers.h"
+#include "pseries.h"
#ifdef DEBUG_LOW
#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
@@ -203,7 +204,6 @@ void __init find_udbg_vterm(void)
struct device_node *stdout_node;
const u32 *termno;
const char *name;
- int add_console;
/* find the boot console from /chosen/stdout */
if (!of_chosen)
@@ -219,8 +219,6 @@ void __init find_udbg_vterm(void)
printk(KERN_WARNING "stdout node missing 'name' property!\n");
goto out;
}
- /* The user has requested a console so this is already set up. */
- add_console = !strstr(cmd_line, "console=");
/* Check if it's a virtual terminal */
if (strncmp(name, "vty", 3) != 0)
@@ -234,15 +232,13 @@ void __init find_udbg_vterm(void)
udbg_putc = udbg_putcLP;
udbg_getc = udbg_getcLP;
udbg_getc_poll = udbg_getc_pollLP;
- if (add_console)
- add_preferred_console("hvc", termno[0] & 0xff, NULL);
+ add_preferred_console("hvc", termno[0] & 0xff, NULL);
} else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
vtermno = termno[0];
udbg_putc = udbg_hvsi_putc;
udbg_getc = udbg_hvsi_getc;
udbg_getc_poll = udbg_hvsi_getc_poll;
- if (add_console)
- add_preferred_console("hvsi", termno[0] & 0xff, NULL);
+ add_preferred_console("hvsi", termno[0] & 0xff, NULL);
}
out:
of_node_put(stdout_node);
@@ -520,6 +516,20 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
BUG_ON(lpar_rc != H_SUCCESS);
}
+static void pSeries_lpar_hpte_removebolted(unsigned long ea,
+ int psize, int ssize)
+{
+ unsigned long slot, vsid, va;
+
+ vsid = get_kernel_vsid(ea, ssize);
+ va = hpt_va(ea, vsid, ssize);
+
+ slot = pSeries_lpar_hpte_find(va, psize, ssize);
+ BUG_ON(slot == -1);
+
+ pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
+}
+
/* Flag bits for H_BULK_REMOVE */
#define HBR_REQUEST 0x4000000000000000UL
#define HBR_RESPONSE 0x8000000000000000UL
@@ -597,6 +607,7 @@ void __init hpte_init_lpar(void)
ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
ppc_md.hpte_insert = pSeries_lpar_hpte_insert;
ppc_md.hpte_remove = pSeries_lpar_hpte_remove;
+ ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range;
ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear;
}
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5a5a19e40bb..0d7229cde0e 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -123,7 +123,7 @@ pcibios_pci_config_bridge(struct pci_dev *dev)
/* Add to children of PCI bridge dev->bus */
child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
if (!child_bus) {
- printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
+ printk (KERN_ERR "%s: could not add second bus\n", __func__);
return -EIO;
}
sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
new file mode 100644
index 00000000000..edbc012c2eb
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -0,0 +1,507 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/sysfs.h>
+
+#include <asm/page.h>
+#include <asm/phyp_dump.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/* Variables, used to communicate data between early boot and late boot */
+static struct phyp_dump phyp_dump_vars;
+struct phyp_dump *phyp_dump_info = &phyp_dump_vars;
+
+static int ibm_configure_kernel_dump;
+/* ------------------------------------------------- */
+/* RTAS interfaces to declare the dump regions */
+
+struct dump_section {
+ u32 dump_flags;
+ u16 source_type;
+ u16 error_flags;
+ u64 source_address;
+ u64 source_length;
+ u64 length_copied;
+ u64 destination_address;
+};
+
+struct phyp_dump_header {
+ u32 version;
+ u16 num_of_sections;
+ u16 status;
+
+ u32 first_offset_section;
+ u32 dump_disk_section;
+ u64 block_num_dd;
+ u64 num_of_blocks_dd;
+ u32 offset_dd;
+ u32 maxtime_to_auto;
+ /* No dump disk path string used */
+
+ struct dump_section cpu_data;
+ struct dump_section hpte_data;
+ struct dump_section kernel_data;
+};
+
+/* The dump header *must be* in low memory, so .bss it */
+static struct phyp_dump_header phdr;
+
+#define NUM_DUMP_SECTIONS 3
+#define DUMP_HEADER_VERSION 0x1
+#define DUMP_REQUEST_FLAG 0x1
+#define DUMP_SOURCE_CPU 0x0001
+#define DUMP_SOURCE_HPTE 0x0002
+#define DUMP_SOURCE_RMO 0x0011
+#define DUMP_ERROR_FLAG 0x2000
+#define DUMP_TRIGGERED 0x4000
+#define DUMP_PERFORMED 0x8000
+
+
+/**
+ * init_dump_header() - initialize the header declaring a dump
+ * Returns: length of dump save area.
+ *
+ * When the hypervisor saves crashed state, it needs to put
+ * it somewhere. The dump header tells the hypervisor where
+ * the data can be saved.
+ */
+static unsigned long init_dump_header(struct phyp_dump_header *ph)
+{
+ unsigned long addr_offset = 0;
+
+ /* Set up the dump header */
+ ph->version = DUMP_HEADER_VERSION;
+ ph->num_of_sections = NUM_DUMP_SECTIONS;
+ ph->status = 0;
+
+ ph->first_offset_section =
+ (u32)offsetof(struct phyp_dump_header, cpu_data);
+ ph->dump_disk_section = 0;
+ ph->block_num_dd = 0;
+ ph->num_of_blocks_dd = 0;
+ ph->offset_dd = 0;
+
+ ph->maxtime_to_auto = 0; /* disabled */
+
+ /* The first two sections are mandatory */
+ ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->cpu_data.source_type = DUMP_SOURCE_CPU;
+ ph->cpu_data.source_address = 0;
+ ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
+ ph->cpu_data.destination_address = addr_offset;
+ addr_offset += phyp_dump_info->cpu_state_size;
+
+ ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
+ ph->hpte_data.source_address = 0;
+ ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
+ ph->hpte_data.destination_address = addr_offset;
+ addr_offset += phyp_dump_info->hpte_region_size;
+
+ /* This section describes the low kernel region */
+ ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->kernel_data.source_type = DUMP_SOURCE_RMO;
+ ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
+ ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
+ ph->kernel_data.destination_address = addr_offset;
+ addr_offset += ph->kernel_data.source_length;
+
+ return addr_offset;
+}
+
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+ printk(KERN_INFO "dump header:\n");
+ /* setup some ph->sections required */
+ printk(KERN_INFO "version = %d\n", ph->version);
+ printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+ printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+ /* No ph->disk, so all should be set to 0 */
+ printk(KERN_INFO "Offset to first section 0x%x\n",
+ ph->first_offset_section);
+ printk(KERN_INFO "dump disk sections should be zero\n");
+ printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+ printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+ printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+ printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+ printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+ /*set cpu state and hpte states as well scratch pad area */
+ printk(KERN_INFO " CPU AREA \n");
+ printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+ printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+ printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+ printk(KERN_INFO "cpu source_address =%lx\n",
+ ph->cpu_data.source_address);
+ printk(KERN_INFO "cpu source_length =%lx\n",
+ ph->cpu_data.source_length);
+ printk(KERN_INFO "cpu length_copied =%lx\n",
+ ph->cpu_data.length_copied);
+
+ printk(KERN_INFO " HPTE AREA \n");
+ printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+ printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+ printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+ printk(KERN_INFO "HPTE source_address =%lx\n",
+ ph->hpte_data.source_address);
+ printk(KERN_INFO "HPTE source_length =%lx\n",
+ ph->hpte_data.source_length);
+ printk(KERN_INFO "HPTE length_copied =%lx\n",
+ ph->hpte_data.length_copied);
+
+ printk(KERN_INFO " SRSD AREA \n");
+ printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+ printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+ printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+ printk(KERN_INFO "SRSD source_address =%lx\n",
+ ph->kernel_data.source_address);
+ printk(KERN_INFO "SRSD source_length =%lx\n",
+ ph->kernel_data.source_length);
+ printk(KERN_INFO "SRSD length_copied =%lx\n",
+ ph->kernel_data.length_copied);
+#endif
+}
+
+static ssize_t show_phyp_dump_active(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+
+ /* create filesystem entry so kdump is phyp-dump aware */
+ return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot);
+}
+
+static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600,
+ show_phyp_dump_active,
+ NULL);
+
+static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
+{
+ int rc;
+
+ /* Add addr value if not initialized before */
+ if (ph->cpu_data.destination_address == 0) {
+ ph->cpu_data.destination_address += addr;
+ ph->hpte_data.destination_address += addr;
+ ph->kernel_data.destination_address += addr;
+ }
+
+ /* ToDo Invalidate kdump and free memory range. */
+
+ do {
+ rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+ 1, ph, sizeof(struct phyp_dump_header));
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
+ "register\n", rc);
+ print_dump_header(ph);
+ return;
+ }
+
+ rc = sysfs_create_file(kernel_kobj, &pdl.attr);
+ if (rc)
+ printk(KERN_ERR "phyp-dump: unable to create sysfs"
+ " file (%d)\n", rc);
+}
+
+static
+void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
+{
+ int rc;
+
+ /* Add addr value if not initialized before */
+ if (ph->cpu_data.destination_address == 0) {
+ ph->cpu_data.destination_address += addr;
+ ph->hpte_data.destination_address += addr;
+ ph->kernel_data.destination_address += addr;
+ }
+
+ do {
+ rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+ 2, ph, sizeof(struct phyp_dump_header));
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_ERR "phyp-dump: unexpected error (%d) "
+ "on invalidate\n", rc);
+ print_dump_header(ph);
+ }
+}
+
+/* ------------------------------------------------- */
+/**
+ * release_memory_range -- release memory previously lmb_reserved
+ * @start_pfn: starting physical frame number
+ * @nr_pages: number of pages to free.
+ *
+ * This routine will release memory that had been previously
+ * lmb_reserved in early boot. The released memory becomes
+ * available for genreal use.
+ */
+static void release_memory_range(unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ struct page *rpage;
+ unsigned long end_pfn;
+ long i;
+
+ end_pfn = start_pfn + nr_pages;
+
+ for (i = start_pfn; i <= end_pfn; i++) {
+ rpage = pfn_to_page(i);
+ if (PageReserved(rpage)) {
+ ClearPageReserved(rpage);
+ init_page_count(rpage);
+ __free_page(rpage);
+ totalram_pages++;
+ }
+ }
+}
+
+/**
+ * track_freed_range -- Counts the range being freed.
+ * Once the counter goes to zero, it re-registers dump for
+ * future use.
+ */
+static void
+track_freed_range(unsigned long addr, unsigned long length)
+{
+ static unsigned long scratch_area_size, reserved_area_size;
+
+ if (addr < phyp_dump_info->init_reserve_start)
+ return;
+
+ if ((addr >= phyp_dump_info->init_reserve_start) &&
+ (addr <= phyp_dump_info->init_reserve_start +
+ phyp_dump_info->init_reserve_size))
+ reserved_area_size += length;
+
+ if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
+ (addr <= phyp_dump_info->reserved_scratch_addr +
+ phyp_dump_info->reserved_scratch_size))
+ scratch_area_size += length;
+
+ if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
+ (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
+
+ invalidate_last_dump(&phdr,
+ phyp_dump_info->reserved_scratch_addr);
+ register_dump_area(&phdr,
+ phyp_dump_info->reserved_scratch_addr);
+ }
+}
+
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ * "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ * "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t store_release_region(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long start_addr, length, end_addr;
+ unsigned long start_pfn, nr_pages;
+ ssize_t ret;
+
+ ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+ if (ret != 2)
+ return -EINVAL;
+
+ track_freed_range(start_addr, length);
+
+ /* Range-check - don't free any reserved memory that
+ * wasn't reserved for phyp-dump */
+ if (start_addr < phyp_dump_info->init_reserve_start)
+ start_addr = phyp_dump_info->init_reserve_start;
+
+ end_addr = phyp_dump_info->init_reserve_start +
+ phyp_dump_info->init_reserve_size;
+ if (start_addr+length > end_addr)
+ length = end_addr - start_addr;
+
+ /* Release the region of memory assed in by user */
+ start_pfn = PFN_DOWN(start_addr);
+ nr_pages = PFN_DOWN(length);
+ release_memory_range(start_pfn, nr_pages);
+
+ return count;
+}
+
+static ssize_t show_release_region(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ u64 second_addr_range;
+
+ /* total reserved size - start of scratch area */
+ second_addr_range = phyp_dump_info->init_reserve_size -
+ phyp_dump_info->reserved_scratch_size;
+ return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
+ " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+ phdr.cpu_data.destination_address,
+ phdr.cpu_data.length_copied,
+ phdr.hpte_data.destination_address,
+ phdr.hpte_data.length_copied,
+ phdr.kernel_data.destination_address,
+ phdr.kernel_data.length_copied,
+ phyp_dump_info->init_reserve_start,
+ second_addr_range);
+}
+
+static struct kobj_attribute rr = __ATTR(release_region, 0600,
+ show_release_region,
+ store_release_region);
+
+static int __init phyp_dump_setup(void)
+{
+ struct device_node *rtas;
+ const struct phyp_dump_header *dump_header = NULL;
+ unsigned long dump_area_start;
+ unsigned long dump_area_length;
+ int header_len = 0;
+ int rc;
+
+ /* If no memory was reserved in early boot, there is nothing to do */
+ if (phyp_dump_info->init_reserve_size == 0)
+ return 0;
+
+ /* Return if phyp dump not supported */
+ if (!phyp_dump_info->phyp_dump_configured)
+ return -ENOSYS;
+
+ /* Is there dump data waiting for us? If there isn't,
+ * then register a new dump area, and release all of
+ * the rest of the reserved ram.
+ *
+ * The /rtas/ibm,kernel-dump rtas node is present only
+ * if there is dump data waiting for us.
+ */
+ rtas = of_find_node_by_path("/rtas");
+ if (rtas) {
+ dump_header = of_get_property(rtas, "ibm,kernel-dump",
+ &header_len);
+ of_node_put(rtas);
+ }
+
+ print_dump_header(dump_header);
+ dump_area_length = init_dump_header(&phdr);
+ /* align down */
+ dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
+
+ if (dump_header == NULL) {
+ register_dump_area(&phdr, dump_area_start);
+ return 0;
+ }
+
+ /* re-register the dump area, if old dump was invalid */
+ if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
+ invalidate_last_dump(&phdr, dump_area_start);
+ register_dump_area(&phdr, dump_area_start);
+ return 0;
+ }
+
+ if (dump_header) {
+ phyp_dump_info->reserved_scratch_addr =
+ dump_header->cpu_data.destination_address;
+ phyp_dump_info->reserved_scratch_size =
+ dump_header->cpu_data.source_length +
+ dump_header->hpte_data.source_length +
+ dump_header->kernel_data.source_length;
+ }
+
+ /* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+ rc = sysfs_create_file(kernel_kobj, &rr.attr);
+ if (rc)
+ printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n",
+ rc);
+
+ /* ToDo: re-register the dump area, for next time. */
+ return 0;
+}
+machine_subsys_initcall(pseries, phyp_dump_setup);
+
+int __init early_init_dt_scan_phyp_dump(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ const unsigned int *sizes;
+
+ phyp_dump_info->phyp_dump_configured = 0;
+ phyp_dump_info->phyp_dump_is_active = 0;
+
+ if (depth != 1 || strcmp(uname, "rtas") != 0)
+ return 0;
+
+ if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
+ phyp_dump_info->phyp_dump_configured++;
+
+ if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
+ phyp_dump_info->phyp_dump_is_active++;
+
+ sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
+ NULL);
+ if (!sizes)
+ return 0;
+
+ if (sizes[0] == 1)
+ phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
+
+ if (sizes[3] == 2)
+ phyp_dump_info->hpte_region_size =
+ *((unsigned long *)&sizes[4]);
+ return 1;
+}
+
+/* Look for phyp_dump= cmdline option */
+static int __init early_phyp_dump_enabled(char *p)
+{
+ phyp_dump_info->phyp_dump_at_boot = 1;
+
+ if (!p)
+ return 0;
+
+ if (strncmp(p, "1", 1) == 0)
+ phyp_dump_info->phyp_dump_at_boot = 1;
+ else if (strncmp(p, "0", 1) == 0)
+ phyp_dump_info->phyp_dump_at_boot = 0;
+
+ return 0;
+}
+early_param("phyp_dump", early_phyp_dump_enabled);
+
+/* Look for phyp_dump_reserve_size= cmdline option */
+static int __init early_phyp_dump_reserve_size(char *p)
+{
+ if (p)
+ phyp_dump_info->reserve_bootvar = memparse(p, &p);
+
+ return 0;
+}
+early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 61136d01955..9e17c0d2a0c 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -38,4 +38,6 @@ extern void pSeries_final_fixup(void);
/* Poweron flag used for enabling auto ups restart */
extern unsigned long rtas_poweron_auto;
+extern void find_udbg_vterm(void);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 2800fced8c7..ac75c10de27 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -222,14 +222,14 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length
tmp = strchr(buf, ' ');
if (!tmp) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
*tmp = '\0';
if (++tmp >= end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
@@ -238,12 +238,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length
*length = simple_strtoul(tmp, &tmp, 10);
if (*length == -1) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
if (*tmp != ' ' || ++tmp >= end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
@@ -252,12 +252,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length
tmp += *length;
if (tmp > end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
tmp++;
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 8e1ef168e2d..e5b0ea87016 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -195,31 +195,30 @@ const struct file_operations scanlog_fops = {
static int __init scanlog_init(void)
{
struct proc_dir_entry *ent;
+ void *data;
+ int err = -ENOMEM;
ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
- if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_ERR "scan-log-dump not implemented on this system\n");
- return -EIO;
- }
+ if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE)
+ return -ENODEV;
- ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL);
- if (ent) {
- ent->proc_fops = &scanlog_fops;
- /* Ideally we could allocate a buffer < 4G */
- ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
- if (!ent->data) {
- printk(KERN_ERR "Failed to allocate a buffer\n");
- remove_proc_entry("scan-log-dump", ent->parent);
- return -ENOMEM;
- }
- ((unsigned int *)ent->data)[0] = 0;
- } else {
- printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
- return -EIO;
- }
+ /* Ideally we could allocate a buffer < 4G */
+ data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+ if (!data)
+ goto err;
+
+ ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+ &scanlog_fops);
+ if (!ent)
+ goto err;
+
+ ent->data = data;
proc_ppc64_scan_log_dump = ent;
return 0;
+err:
+ kfree(data);
+ return err;
}
static void __exit scanlog_cleanup(void)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index fdb9b1c8f97..f66aa9c3b13 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -76,9 +76,6 @@
#define DBG(fmt...)
#endif
-/* move those away to a .h */
-extern void find_udbg_vterm(void);
-
int fwnmi_active; /* TRUE if an FWNMI handler is present */
static void pseries_shared_idle_sleep(void);
@@ -127,14 +124,60 @@ void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
desc->chip->eoi(irq);
}
-static void __init pseries_mpic_init_IRQ(void)
+static void __init pseries_setup_i8259_cascade(void)
{
- struct device_node *np, *old, *cascade = NULL;
- const unsigned int *addrp;
+ struct device_node *np, *old, *found = NULL;
+ unsigned int cascade;
+ const u32 *addrp;
unsigned long intack = 0;
+ int naddr;
+
+ for_each_node_by_type(np, "interrupt-controller") {
+ if (of_device_is_compatible(np, "chrp,iic")) {
+ found = np;
+ break;
+ }
+ }
+
+ if (found == NULL) {
+ printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
+ return;
+ }
+
+ cascade = irq_of_parse_and_map(found, 0);
+ if (cascade == NO_IRQ) {
+ printk(KERN_ERR "pic: failed to map cascade interrupt");
+ return;
+ }
+ pr_debug("pic: cascade mapped to irq %d\n", cascade);
+
+ for (old = of_node_get(found); old != NULL ; old = np) {
+ np = of_get_parent(old);
+ of_node_put(old);
+ if (np == NULL)
+ break;
+ if (strcmp(np->name, "pci") != 0)
+ continue;
+ addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+ if (addrp == NULL)
+ continue;
+ naddr = of_n_addr_cells(np);
+ intack = addrp[naddr-1];
+ if (naddr > 1)
+ intack |= ((unsigned long)addrp[naddr-2]) << 32;
+ }
+ if (intack)
+ printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
+ i8259_init(found, intack);
+ of_node_put(found);
+ set_irq_chained_handler(cascade, pseries_8259_cascade);
+}
+
+static void __init pseries_mpic_init_IRQ(void)
+{
+ struct device_node *np;
const unsigned int *opprop;
unsigned long openpic_addr = 0;
- unsigned int cascade_irq;
int naddr, n, i, opplen;
struct mpic *mpic;
@@ -167,43 +210,13 @@ static void __init pseries_mpic_init_IRQ(void)
mpic_init(mpic);
/* Look for cascade */
- for_each_node_by_type(np, "interrupt-controller")
- if (of_device_is_compatible(np, "chrp,iic")) {
- cascade = np;
- break;
- }
- if (cascade == NULL)
- return;
-
- cascade_irq = irq_of_parse_and_map(cascade, 0);
- if (cascade_irq == NO_IRQ) {
- printk(KERN_ERR "mpic: failed to map cascade interrupt");
- return;
- }
+ pseries_setup_i8259_cascade();
+}
- /* Check ACK type */
- for (old = of_node_get(cascade); old != NULL ; old = np) {
- np = of_get_parent(old);
- of_node_put(old);
- if (np == NULL)
- break;
- if (strcmp(np->name, "pci") != 0)
- continue;
- addrp = of_get_property(np, "8259-interrupt-acknowledge",
- NULL);
- if (addrp == NULL)
- continue;
- naddr = of_n_addr_cells(np);
- intack = addrp[naddr-1];
- if (naddr > 1)
- intack |= ((unsigned long)addrp[naddr-2]) << 32;
- }
- if (intack)
- printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
- intack);
- i8259_init(cascade, intack);
- of_node_put(cascade);
- set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
+static void __init pseries_xics_init_IRQ(void)
+{
+ xics_init_IRQ();
+ pseries_setup_i8259_cascade();
}
static void pseries_lpar_enable_pmcs(void)
@@ -235,7 +248,7 @@ static void __init pseries_discover_pic(void)
smp_init_pseries_mpic();
return;
} else if (strstr(typep, "ppc-xicp")) {
- ppc_md.init_IRQ = xics_init_IRQ;
+ ppc_md.init_IRQ = pseries_xics_init_IRQ;
setup_kexec_cpu_down_xics();
smp_init_pseries_xics();
return;
@@ -393,6 +406,7 @@ static void pseries_dedicated_idle_sleep(void)
{
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
+ unsigned long in_purr, out_purr;
/*
* Indicate to the HV that we are idle. Now would be
@@ -400,6 +414,7 @@ static void pseries_dedicated_idle_sleep(void)
*/
get_lppaca()->idle = 1;
get_lppaca()->donate_dedicated_cpu = 1;
+ in_purr = mfspr(SPRN_PURR);
/*
* We come in with interrupts disabled, and need_resched()
@@ -432,6 +447,8 @@ static void pseries_dedicated_idle_sleep(void)
out:
HMT_medium();
+ out_purr = mfspr(SPRN_PURR);
+ get_lppaca()->wait_state_cycles += out_purr - in_purr;
get_lppaca()->donate_dedicated_cpu = 0;
get_lppaca()->idle = 0;
}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index a977f200db8..43df53c30aa 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -516,6 +516,8 @@ static struct irq_chip xics_pic_lpar = {
.set_affinity = xics_set_affinity
};
+/* Points to the irq_chip we're actually using */
+static struct irq_chip *xics_irq_chip;
static int xics_host_match(struct irq_host *h, struct device_node *node)
{
@@ -526,23 +528,13 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
return !of_device_is_compatible(node, "chrp,iic");
}
-static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw)
+static int xics_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
{
- pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
+ pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
get_irq_desc(virq)->status |= IRQ_LEVEL;
- set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
- return 0;
-}
-
-static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
-
- get_irq_desc(virq)->status |= IRQ_LEVEL;
- set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
+ set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
return 0;
}
@@ -561,27 +553,20 @@ static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
return 0;
}
-static struct irq_host_ops xics_host_direct_ops = {
+static struct irq_host_ops xics_host_ops = {
.match = xics_host_match,
- .map = xics_host_map_direct,
- .xlate = xics_host_xlate,
-};
-
-static struct irq_host_ops xics_host_lpar_ops = {
- .match = xics_host_match,
- .map = xics_host_map_lpar,
+ .map = xics_host_map,
.xlate = xics_host_xlate,
};
static void __init xics_init_host(void)
{
- struct irq_host_ops *ops;
-
if (firmware_has_feature(FW_FEATURE_LPAR))
- ops = &xics_host_lpar_ops;
+ xics_irq_chip = &xics_pic_lpar;
else
- ops = &xics_host_direct_ops;
- xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, ops,
+ xics_irq_chip = &xics_pic_direct;
+
+ xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
XICS_IRQ_SPURIOUS);
BUG_ON(xics_host == NULL);
irq_set_default_host(xics_host);
@@ -655,52 +640,6 @@ static void __init xics_init_one_node(struct device_node *np,
}
}
-
-static void __init xics_setup_8259_cascade(void)
-{
- struct device_node *np, *old, *found = NULL;
- int cascade, naddr;
- const u32 *addrp;
- unsigned long intack = 0;
-
- for_each_node_by_type(np, "interrupt-controller")
- if (of_device_is_compatible(np, "chrp,iic")) {
- found = np;
- break;
- }
- if (found == NULL) {
- printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
- return;
- }
- cascade = irq_of_parse_and_map(found, 0);
- if (cascade == NO_IRQ) {
- printk(KERN_ERR "xics: failed to map cascade interrupt");
- return;
- }
- pr_debug("xics: cascade mapped to irq %d\n", cascade);
-
- for (old = of_node_get(found); old != NULL ; old = np) {
- np = of_get_parent(old);
- of_node_put(old);
- if (np == NULL)
- break;
- if (strcmp(np->name, "pci") != 0)
- continue;
- addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
- if (addrp == NULL)
- continue;
- naddr = of_n_addr_cells(np);
- intack = addrp[naddr-1];
- if (naddr > 1)
- intack |= ((unsigned long)addrp[naddr-2]) << 32;
- }
- if (intack)
- printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
- i8259_init(found, intack);
- of_node_put(found);
- set_irq_chained_handler(cascade, pseries_8259_cascade);
-}
-
void __init xics_init_IRQ(void)
{
struct device_node *np;
@@ -733,8 +672,6 @@ void __init xics_init_IRQ(void)
xics_setup_cpu();
- xics_setup_8259_cascade();
-
ppc64_boot_msg(0x21, "XICS Done");
}
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index c26bcff47b6..1c5321ae8f2 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -28,7 +28,4 @@ struct xics_ipi_struct {
extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
-struct irq_desc;
-extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc);
-
#endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 15f3e8527d7..6d386d0071a 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
+obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
@@ -27,6 +28,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
+obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index df8bd2b6479..58292a086c1 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -44,9 +44,6 @@
#define CPM_MAP_SIZE (0x4000)
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static void m8xx_cpm_dpinit(void);
-#endif
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
immap_t __iomem *mpc8xx_immr;
static cpic8xx_t __iomem *cpic_reg;
@@ -229,12 +226,7 @@ void __init cpm_reset(void)
out_be32(&siu_conf->sc_sdcr, 1);
immr_unmap(siu_conf);
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
cpm_muram_init();
-#else
- /* Reclaim the DP memory for our use. */
- m8xx_cpm_dpinit();
-#endif
}
static DEFINE_SPINLOCK(cmd_lock);
@@ -257,7 +249,7 @@ int cpm_command(u32 command, u8 opcode)
if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
@@ -293,110 +285,6 @@ cpm_setbrg(uint brg, uint rate)
CPM_BRG_EN | CPM_BRG_DIV16);
}
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/*
- * 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up...
- */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-#define CPM_DPMEM_ALIGNMENT 8
-static u8 __iomem *dpram_vbase;
-static phys_addr_t dpram_pbase;
-
-static void m8xx_cpm_dpinit(void)
-{
- spin_lock_init(&cpm_dpmem_lock);
-
- dpram_vbase = cpmp->cp_dpmem;
- dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem);
-
- /* Initialize the info header */
- rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
- sizeof(cpm_boot_dpmem_rh_block) /
- sizeof(cpm_boot_dpmem_rh_block[0]),
- cpm_boot_dpmem_rh_block);
-
- /*
- * Attach the usable dpmem area.
- * XXX: This is actually crap. CPM_DATAONLY_BASE and
- * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies
- * with the processor and the microcode patches applied / activated.
- * But the following should be at least safe.
- */
- rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/*
- * Allocate the requested size worth of DP memory.
- * This function returns an offset into the DPRAM area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- cpm_dpmem_info.alignment = align;
- start = rh_alloc(&cpm_dpmem_info, size, "commproc");
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return (uint)start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, offset);
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
- rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
- return (void *)(dpram_vbase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-
-uint cpm_dpram_phys(u8 *addr)
-{
- return (dpram_pbase + (uint)(addr - dpram_vbase));
-}
-EXPORT_SYMBOL(cpm_dpram_phys);
-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
-
struct cpm_ioport16 {
__be16 dir, par, odr_sor, dat, intr;
__be16 res[3];
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index dd066bb1d56..5a6c5dfc53e 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -46,10 +46,6 @@
#include <sysdev/fsl_soc.h>
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static void cpm2_dpinit(void);
-#endif
-
cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
/* We allocate this here because it is used almost exclusively for
@@ -71,15 +67,17 @@ void __init cpm2_reset(void)
/* Reclaim the DP memory for our use.
*/
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
cpm_muram_init();
-#else
- cpm2_dpinit();
-#endif
/* Tell everyone where the comm processor resides.
*/
cpmp = &cpm2_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+ /* Reset the CPM.
+ */
+ cpm_command(CPM_CR_RST, 0);
+#endif
}
static DEFINE_SPINLOCK(cmd_lock);
@@ -99,7 +97,7 @@ int cpm_command(u32 command, u8 opcode)
if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
@@ -347,95 +345,6 @@ int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
return ret;
}
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-static u8 __iomem *im_dprambase;
-
-static void cpm2_dpinit(void)
-{
- spin_lock_init(&cpm_dpmem_lock);
-
- /* initialize the info header */
- rh_init(&cpm_dpmem_info, 1,
- sizeof(cpm_boot_dpmem_rh_block) /
- sizeof(cpm_boot_dpmem_rh_block[0]),
- cpm_boot_dpmem_rh_block);
-
- im_dprambase = cpm2_immr;
-
- /* Attach the usable dpmem area */
- /* XXX: This is actually crap. CPM_DATAONLY_BASE and
- * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
- * varies with the processor and the microcode patches activated.
- * But the following should be at least safe.
- */
- rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- cpm_dpmem_info.alignment = align;
- start = rh_alloc(&cpm_dpmem_info, size, "commproc");
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return (uint)start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, offset);
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_dpmem_lock, flags);
- cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
- spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
- return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
- rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
- return (void *)(im_dprambase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
-
struct cpm2_ioports {
u32 dir, par, sor, odr, dat;
u32 res[3];
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 165981c8778..cb7df2dce44 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -58,7 +58,6 @@ void __init udbg_init_cpm(void)
}
#endif
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
static spinlock_t cpm_muram_lock;
static rh_block_t cpm_boot_muram_rh_block[16];
static rh_info_t cpm_muram_info;
@@ -199,5 +198,3 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
}
EXPORT_SYMBOL(cpm_muram_dma);
-
-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index e0e24b01e3a..005c2ecf976 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -37,6 +37,7 @@
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
@@ -44,7 +45,6 @@
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
-#include <asm/lmb.h>
#include <asm/ppc-pci.h>
#include "dart.h"
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
new file mode 100644
index 00000000000..422c8faef59
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -0,0 +1,129 @@
+/*
+ * Freescale LBC and UPM routines.
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <asm/fsl_lbc.h>
+
+spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
+
+struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+EXPORT_SYMBOL(fsl_lbc_regs);
+
+static char __initdata *compat_lbc[] = {
+ "fsl,pq2-localbus",
+ "fsl,pq2pro-localbus",
+ "fsl,pq3-localbus",
+ "fsl,elbc",
+};
+
+static int __init fsl_lbc_init(void)
+{
+ struct device_node *lbus;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
+ lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
+ if (lbus)
+ goto found;
+ }
+ return -ENODEV;
+
+found:
+ fsl_lbc_regs = of_iomap(lbus, 0);
+ of_node_put(lbus);
+ if (!fsl_lbc_regs)
+ return -ENOMEM;
+ return 0;
+}
+arch_initcall(fsl_lbc_init);
+
+/**
+ * fsl_lbc_find - find Localbus bank
+ * @addr_base: base address of the memory bank
+ *
+ * This function walks LBC banks comparing "Base address" field of the BR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_lbc_find(phys_addr_t addr_base)
+{
+ int i;
+
+ if (!fsl_lbc_regs)
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
+ __be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
+ __be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+
+ if (br & BR_V && (br & or & BR_BA) == addr_base)
+ return i;
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_lbc_find);
+
+/**
+ * fsl_upm_find - find pre-programmed UPM via base address
+ * @addr_base: base address of the memory bank controlled by the UPM
+ * @upm: pointer to the allocated fsl_upm structure
+ *
+ * This function fills fsl_upm structure so you can use it with the rest of
+ * UPM API. On success this function returns 0, otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
+{
+ int bank;
+ __be32 br;
+
+ bank = fsl_lbc_find(addr_base);
+ if (bank < 0)
+ return bank;
+
+ br = in_be32(&fsl_lbc_regs->bank[bank].br);
+
+ switch (br & BR_MSEL) {
+ case BR_MS_UPMA:
+ upm->mxmr = &fsl_lbc_regs->mamr;
+ break;
+ case BR_MS_UPMB:
+ upm->mxmr = &fsl_lbc_regs->mbmr;
+ break;
+ case BR_MS_UPMC:
+ upm->mxmr = &fsl_lbc_regs->mcmr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (br & BR_PS) {
+ case BR_PS_8:
+ upm->width = 8;
+ break;
+ case BR_PS_16:
+ upm->width = 16;
+ break;
+ case BR_PS_32:
+ upm->width = 32;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(fsl_upm_find);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3581416905e..5c1b246aacc 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -75,6 +75,33 @@ phys_addr_t get_immrbase(void)
EXPORT_SYMBOL(get_immrbase);
+static u32 sysfreq = -1;
+
+u32 fsl_get_sys_freq(void)
+{
+ struct device_node *soc;
+ const u32 *prop;
+ int size;
+
+ if (sysfreq != -1)
+ return sysfreq;
+
+ soc = of_find_node_by_type(NULL, "soc");
+ if (!soc)
+ return -1;
+
+ prop = of_get_property(soc, "clock-frequency", &size);
+ if (!prop || size != sizeof(*prop) || *prop == 0)
+ prop = of_get_property(soc, "bus-frequency", &size);
+
+ if (prop && size == sizeof(*prop))
+ sysfreq = *prop;
+
+ of_node_put(soc);
+ return sysfreq;
+}
+EXPORT_SYMBOL(fsl_get_sys_freq);
+
#if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
static u32 brgfreq = -1;
@@ -517,9 +544,9 @@ arch_initcall(fsl_i2c_of_init);
static int __init mpc83xx_wdt_init(void)
{
struct resource r;
- struct device_node *soc, *np;
+ struct device_node *np;
struct platform_device *dev;
- const unsigned int *freq;
+ u32 freq = fsl_get_sys_freq();
int ret;
np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
@@ -529,19 +556,6 @@ static int __init mpc83xx_wdt_init(void)
goto nodev;
}
- soc = of_find_node_by_type(NULL, "soc");
-
- if (!soc) {
- ret = -ENODEV;
- goto nosoc;
- }
-
- freq = of_get_property(soc, "bus-frequency", NULL);
- if (!freq) {
- ret = -ENODEV;
- goto err;
- }
-
memset(&r, 0, sizeof(r));
ret = of_address_to_resource(np, 0, &r);
@@ -554,20 +568,16 @@ static int __init mpc83xx_wdt_init(void)
goto err;
}
- ret = platform_device_add_data(dev, freq, sizeof(int));
+ ret = platform_device_add_data(dev, &freq, sizeof(freq));
if (ret)
goto unreg;
- of_node_put(soc);
of_node_put(np);
-
return 0;
unreg:
platform_device_unregister(dev);
err:
- of_node_put(soc);
-nosoc:
of_node_put(np);
nodev:
return ret;
@@ -736,547 +746,6 @@ err:
arch_initcall(fsl_usb_of_init);
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-#ifdef CONFIG_CPM2
-
-extern void init_scc_ioports(struct fs_uart_platform_info*);
-
-static const char fcc_regs[] = "fcc_regs";
-static const char fcc_regs_c[] = "fcc_regs_c";
-static const char fcc_pram[] = "fcc_pram";
-static char bus_id[9][BUS_ID_SIZE];
-
-static int __init fs_enet_of_init(void)
-{
- struct device_node *np;
- unsigned int i;
- struct platform_device *fs_enet_dev;
- struct resource res;
- int ret;
-
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
- i++) {
- struct resource r[4];
- struct device_node *phy, *mdio;
- struct fs_platform_info fs_enet_data;
- const unsigned int *id, *phy_addr, *phy_irq;
- const void *mac_addr;
- const phandle *ph;
- const char *model;
-
- memset(r, 0, sizeof(r));
- memset(&fs_enet_data, 0, sizeof(fs_enet_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
- r[0].name = fcc_regs;
-
- ret = of_address_to_resource(np, 1, &r[1]);
- if (ret)
- goto err;
- r[1].name = fcc_pram;
-
- ret = of_address_to_resource(np, 2, &r[2]);
- if (ret)
- goto err;
- r[2].name = fcc_regs_c;
- fs_enet_data.fcc_regs_c = r[2].start;
-
- of_irq_to_resource(np, 0, &r[3]);
-
- fs_enet_dev =
- platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
-
- if (IS_ERR(fs_enet_dev)) {
- ret = PTR_ERR(fs_enet_dev);
- goto err;
- }
-
- model = of_get_property(np, "model", NULL);
- if (model == NULL) {
- ret = -ENODEV;
- goto unreg;
- }
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(fs_enet_data.macaddr, mac_addr, 6);
-
- ph = of_get_property(np, "phy-handle", NULL);
- phy = of_find_node_by_phandle(*ph);
-
- if (phy == NULL) {
- ret = -ENODEV;
- goto unreg;
- }
-
- phy_addr = of_get_property(phy, "reg", NULL);
- fs_enet_data.phy_addr = *phy_addr;
-
- phy_irq = of_get_property(phy, "interrupts", NULL);
-
- id = of_get_property(np, "device-id", NULL);
- fs_enet_data.fs_no = *id;
- strcpy(fs_enet_data.fs_type, model);
-
- mdio = of_get_parent(phy);
- ret = of_address_to_resource(mdio, 0, &res);
- if (ret) {
- of_node_put(phy);
- of_node_put(mdio);
- goto unreg;
- }
-
- fs_enet_data.clk_rx = *((u32 *)of_get_property(np,
- "rx-clock", NULL));
- fs_enet_data.clk_tx = *((u32 *)of_get_property(np,
- "tx-clock", NULL));
-
- if (strstr(model, "FCC")) {
- int fcc_index = *id - 1;
- const unsigned char *mdio_bb_prop;
-
- fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
- fs_enet_data.rx_ring = 32;
- fs_enet_data.tx_ring = 32;
- fs_enet_data.rx_copybreak = 240;
- fs_enet_data.use_napi = 0;
- fs_enet_data.napi_weight = 17;
- fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
- fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
- fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
-
- snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
- (u32)res.start, fs_enet_data.phy_addr);
- fs_enet_data.bus_id = (char*)&bus_id[(*id)];
- fs_enet_data.init_ioports = init_fcc_ioports;
-
- mdio_bb_prop = of_get_property(phy, "bitbang", NULL);
- if (mdio_bb_prop) {
- struct platform_device *fs_enet_mdio_bb_dev;
- struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
-
- fs_enet_mdio_bb_dev =
- platform_device_register_simple("fsl-bb-mdio",
- i, NULL, 0);
- memset(&fs_enet_mdio_bb_data, 0,
- sizeof(struct fs_mii_bb_platform_info));
- fs_enet_mdio_bb_data.mdio_dat.bit =
- mdio_bb_prop[0];
- fs_enet_mdio_bb_data.mdio_dir.bit =
- mdio_bb_prop[1];
- fs_enet_mdio_bb_data.mdc_dat.bit =
- mdio_bb_prop[2];
- fs_enet_mdio_bb_data.mdio_port =
- mdio_bb_prop[3];
- fs_enet_mdio_bb_data.mdc_port =
- mdio_bb_prop[4];
- fs_enet_mdio_bb_data.delay =
- mdio_bb_prop[5];
-
- fs_enet_mdio_bb_data.irq[0] = phy_irq[0];
- fs_enet_mdio_bb_data.irq[1] = -1;
- fs_enet_mdio_bb_data.irq[2] = -1;
- fs_enet_mdio_bb_data.irq[3] = phy_irq[0];
- fs_enet_mdio_bb_data.irq[31] = -1;
-
- fs_enet_mdio_bb_data.mdio_dat.offset =
- (u32)&cpm2_immr->im_ioport.iop_pdatc;
- fs_enet_mdio_bb_data.mdio_dir.offset =
- (u32)&cpm2_immr->im_ioport.iop_pdirc;
- fs_enet_mdio_bb_data.mdc_dat.offset =
- (u32)&cpm2_immr->im_ioport.iop_pdatc;
-
- ret = platform_device_add_data(
- fs_enet_mdio_bb_dev,
- &fs_enet_mdio_bb_data,
- sizeof(struct fs_mii_bb_platform_info));
- if (ret)
- goto unreg;
- }
-
- of_node_put(phy);
- of_node_put(mdio);
-
- ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
- sizeof(struct
- fs_platform_info));
- if (ret)
- goto unreg;
- }
- }
- return 0;
-
-unreg:
- platform_device_unregister(fs_enet_dev);
-err:
- return ret;
-}
-
-arch_initcall(fs_enet_of_init);
-
-static const char scc_regs[] = "regs";
-static const char scc_pram[] = "pram";
-
-static int __init cpm_uart_of_init(void)
-{
- struct device_node *np;
- unsigned int i;
- struct platform_device *cpm_uart_dev;
- int ret;
-
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
- i++) {
- struct resource r[3];
- struct fs_uart_platform_info cpm_uart_data;
- const int *id;
- const char *model;
-
- memset(r, 0, sizeof(r));
- memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- r[0].name = scc_regs;
-
- ret = of_address_to_resource(np, 1, &r[1]);
- if (ret)
- goto err;
- r[1].name = scc_pram;
-
- of_irq_to_resource(np, 0, &r[2]);
-
- cpm_uart_dev =
- platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
-
- if (IS_ERR(cpm_uart_dev)) {
- ret = PTR_ERR(cpm_uart_dev);
- goto err;
- }
-
- id = of_get_property(np, "device-id", NULL);
- cpm_uart_data.fs_no = *id;
-
- model = of_get_property(np, "model", NULL);
- strcpy(cpm_uart_data.fs_type, model);
-
- cpm_uart_data.uart_clk = ppc_proc_freq;
-
- cpm_uart_data.tx_num_fifo = 4;
- cpm_uart_data.tx_buf_size = 32;
- cpm_uart_data.rx_num_fifo = 4;
- cpm_uart_data.rx_buf_size = 32;
- cpm_uart_data.clk_rx = *((u32 *)of_get_property(np,
- "rx-clock", NULL));
- cpm_uart_data.clk_tx = *((u32 *)of_get_property(np,
- "tx-clock", NULL));
-
- ret =
- platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
- sizeof(struct
- fs_uart_platform_info));
- if (ret)
- goto unreg;
- }
-
- return 0;
-
-unreg:
- platform_device_unregister(cpm_uart_dev);
-err:
- return ret;
-}
-
-arch_initcall(cpm_uart_of_init);
-#endif /* CONFIG_CPM2 */
-
-#ifdef CONFIG_8xx
-
-extern void init_scc_ioports(struct fs_platform_info*);
-extern int platform_device_skip(const char *model, int id);
-
-static int __init fs_enet_mdio_of_init(void)
-{
- struct device_node *np;
- unsigned int i;
- struct platform_device *mdio_dev;
- struct resource res;
- int ret;
-
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL;
- i++) {
- struct fs_mii_fec_platform_info mdio_data;
-
- memset(&res, 0, sizeof(res));
- memset(&mdio_data, 0, sizeof(mdio_data));
-
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- goto err;
-
- mdio_dev =
- platform_device_register_simple("fsl-cpm-fec-mdio",
- res.start, &res, 1);
- if (IS_ERR(mdio_dev)) {
- ret = PTR_ERR(mdio_dev);
- goto err;
- }
-
- mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-
- ret =
- platform_device_add_data(mdio_dev, &mdio_data,
- sizeof(struct fs_mii_fec_platform_info));
- if (ret)
- goto unreg;
- }
- return 0;
-
-unreg:
- platform_device_unregister(mdio_dev);
-err:
- return ret;
-}
-
-arch_initcall(fs_enet_mdio_of_init);
-
-static const char *enet_regs = "regs";
-static const char *enet_pram = "pram";
-static const char *enet_irq = "interrupt";
-static char bus_id[9][BUS_ID_SIZE];
-
-static int __init fs_enet_of_init(void)
-{
- struct device_node *np;
- unsigned int i;
- struct platform_device *fs_enet_dev = NULL;
- struct resource res;
- int ret;
-
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
- i++) {
- struct resource r[4];
- struct device_node *phy = NULL, *mdio = NULL;
- struct fs_platform_info fs_enet_data;
- const unsigned int *id;
- const unsigned int *phy_addr;
- const void *mac_addr;
- const phandle *ph;
- const char *model;
-
- memset(r, 0, sizeof(r));
- memset(&fs_enet_data, 0, sizeof(fs_enet_data));
-
- model = of_get_property(np, "model", NULL);
- if (model == NULL) {
- ret = -ENODEV;
- goto unreg;
- }
-
- id = of_get_property(np, "device-id", NULL);
- fs_enet_data.fs_no = *id;
-
- if (platform_device_skip(model, *id))
- continue;
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
- r[0].name = enet_regs;
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(fs_enet_data.macaddr, mac_addr, 6);
-
- ph = of_get_property(np, "phy-handle", NULL);
- if (ph != NULL)
- phy = of_find_node_by_phandle(*ph);
-
- if (phy != NULL) {
- phy_addr = of_get_property(phy, "reg", NULL);
- fs_enet_data.phy_addr = *phy_addr;
- fs_enet_data.has_phy = 1;
-
- mdio = of_get_parent(phy);
- ret = of_address_to_resource(mdio, 0, &res);
- if (ret) {
- of_node_put(phy);
- of_node_put(mdio);
- goto unreg;
- }
- }
-
- model = of_get_property(np, "model", NULL);
- strcpy(fs_enet_data.fs_type, model);
-
- if (strstr(model, "FEC")) {
- r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
- r[1].flags = IORESOURCE_IRQ;
- r[1].name = enet_irq;
-
- fs_enet_dev =
- platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2);
-
- if (IS_ERR(fs_enet_dev)) {
- ret = PTR_ERR(fs_enet_dev);
- goto err;
- }
-
- fs_enet_data.rx_ring = 128;
- fs_enet_data.tx_ring = 16;
- fs_enet_data.rx_copybreak = 240;
- fs_enet_data.use_napi = 1;
- fs_enet_data.napi_weight = 17;
-
- snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x",
- (u32)res.start, fs_enet_data.phy_addr);
- fs_enet_data.bus_id = (char*)&bus_id[i];
- fs_enet_data.init_ioports = init_fec_ioports;
- }
- if (strstr(model, "SCC")) {
- ret = of_address_to_resource(np, 1, &r[1]);
- if (ret)
- goto err;
- r[1].name = enet_pram;
-
- r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
- r[2].flags = IORESOURCE_IRQ;
- r[2].name = enet_irq;
-
- fs_enet_dev =
- platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3);
-
- if (IS_ERR(fs_enet_dev)) {
- ret = PTR_ERR(fs_enet_dev);
- goto err;
- }
-
- fs_enet_data.rx_ring = 64;
- fs_enet_data.tx_ring = 8;
- fs_enet_data.rx_copybreak = 240;
- fs_enet_data.use_napi = 1;
- fs_enet_data.napi_weight = 17;
-
- snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1");
- fs_enet_data.bus_id = (char*)&bus_id[i];
- fs_enet_data.init_ioports = init_scc_ioports;
- }
-
- of_node_put(phy);
- of_node_put(mdio);
-
- ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
- sizeof(struct
- fs_platform_info));
- if (ret)
- goto unreg;
- }
- return 0;
-
-unreg:
- platform_device_unregister(fs_enet_dev);
-err:
- return ret;
-}
-
-arch_initcall(fs_enet_of_init);
-
-static int __init fsl_pcmcia_of_init(void)
-{
- struct device_node *np;
- /*
- * Register all the devices which type is "pcmcia"
- */
- for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia")
- of_platform_device_create(np, "m8xx-pcmcia", NULL);
- return 0;
-}
-
-arch_initcall(fsl_pcmcia_of_init);
-
-static const char *smc_regs = "regs";
-static const char *smc_pram = "pram";
-
-static int __init cpm_smc_uart_of_init(void)
-{
- struct device_node *np;
- unsigned int i;
- struct platform_device *cpm_uart_dev;
- int ret;
-
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
- i++) {
- struct resource r[3];
- struct fs_uart_platform_info cpm_uart_data;
- const int *id;
- const char *model;
-
- memset(r, 0, sizeof(r));
- memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- r[0].name = smc_regs;
-
- ret = of_address_to_resource(np, 1, &r[1]);
- if (ret)
- goto err;
- r[1].name = smc_pram;
-
- r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
- r[2].flags = IORESOURCE_IRQ;
-
- cpm_uart_dev =
- platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3);
-
- if (IS_ERR(cpm_uart_dev)) {
- ret = PTR_ERR(cpm_uart_dev);
- goto err;
- }
-
- model = of_get_property(np, "model", NULL);
- strcpy(cpm_uart_data.fs_type, model);
-
- id = of_get_property(np, "device-id", NULL);
- cpm_uart_data.fs_no = *id;
- cpm_uart_data.uart_clk = ppc_proc_freq;
-
- cpm_uart_data.tx_num_fifo = 4;
- cpm_uart_data.tx_buf_size = 32;
- cpm_uart_data.rx_num_fifo = 4;
- cpm_uart_data.rx_buf_size = 32;
-
- ret =
- platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
- sizeof(struct
- fs_uart_platform_info));
- if (ret)
- goto unreg;
- }
-
- return 0;
-
-unreg:
- platform_device_unregister(cpm_uart_dev);
-err:
- return ret;
-}
-
-arch_initcall(cpm_smc_uart_of_init);
-
-#endif /* CONFIG_8xx */
-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
-
static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
struct spi_board_info *board_infos,
unsigned int num_board_infos,
@@ -1372,25 +841,9 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
sysclk = get_brgfreq();
#endif
if (sysclk == -1) {
- struct device_node *np;
- const u32 *freq;
- int size;
-
- np = of_find_node_by_type(NULL, "soc");
- if (!np)
+ sysclk = fsl_get_sys_freq();
+ if (sysclk == -1)
return -ENODEV;
-
- freq = of_get_property(np, "clock-frequency", &size);
- if (!freq || size != sizeof(*freq) || *freq == 0) {
- freq = of_get_property(np, "bus-frequency", &size);
- if (!freq || size != sizeof(*freq) || *freq == 0) {
- of_node_put(np);
- return -ENODEV;
- }
- }
-
- sysclk = *freq;
- of_node_put(np);
}
ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 63e7db30a4c..74c4a9657b3 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -7,6 +7,7 @@
extern phys_addr_t get_immrbase(void);
extern u32 get_brgfreq(void);
extern u32 get_baudrate(void);
+extern u32 fsl_get_sys_freq(void);
struct spi_board_info;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 6ffdda244bb..8619f2a3f1f 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -175,13 +175,16 @@ static inline void _mpic_write(enum mpic_reg_type type,
switch(type) {
#ifdef CONFIG_PPC_DCR
case mpic_access_dcr:
- return dcr_write(rb->dhost, reg, value);
+ dcr_write(rb->dhost, reg, value);
+ break;
#endif
case mpic_access_mmio_be:
- return out_be32(rb->base + (reg >> 2), value);
+ out_be32(rb->base + (reg >> 2), value);
+ break;
case mpic_access_mmio_le:
default:
- return out_le32(rb->base + (reg >> 2), value);
+ out_le32(rb->base + (reg >> 2), value);
+ break;
}
}
@@ -1000,7 +1003,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
const char *name)
{
struct mpic *mpic;
- u32 reg;
+ u32 greg_feature;
const char *vers;
int i;
int intvec_top;
@@ -1064,7 +1067,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Look for protected sources */
if (node) {
- unsigned int psize, bits, mapsize;
+ int psize;
+ unsigned int bits, mapsize;
const u32 *psrc =
of_get_property(node, "protected-sources", &psize);
if (psrc) {
@@ -1107,8 +1111,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
* in, try to obtain one
*/
if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
- const u32 *reg;
- reg = of_get_property(node, "reg", NULL);
+ const u32 *reg = of_get_property(node, "reg", NULL);
BUG_ON(reg == NULL);
paddr = of_translate_address(node, reg);
BUG_ON(paddr == OF_BAD_ADDR);
@@ -1137,12 +1140,13 @@ struct mpic * __init mpic_alloc(struct device_node *node,
* MPICs, num sources as well. On ISU MPICs, sources are counted
* as ISUs are added
*/
- reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
- mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+ greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+ mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
>> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
if (isu_size == 0)
- mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
- >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+ mpic->num_sources =
+ ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+ >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
@@ -1161,7 +1165,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
/* Display version */
- switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
+ switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
vers = "1.0";
break;
@@ -1321,7 +1325,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
{
- int is_ipi;
+ unsigned int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
@@ -1344,7 +1348,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
unsigned int mpic_irq_get_priority(unsigned int irq)
{
- int is_ipi;
+ unsigned int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
@@ -1406,11 +1410,6 @@ void mpic_cpu_set_priority(int prio)
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio);
}
-/*
- * XXX: someone who knows mpic should check this.
- * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
- * or can we reset the mpic in the new kernel?
- */
void mpic_teardown_this_cpu(int secondary)
{
struct mpic *mpic = mpic_primary;
@@ -1430,6 +1429,10 @@ void mpic_teardown_this_cpu(int secondary)
/* Set current processor priority to max */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
+ /* We need to EOI the IPI since not all platforms reset the MPIC
+ * on boot and new interrupts wouldn't get delivered otherwise.
+ */
+ mpic_eoi(mpic);
spin_unlock_irqrestore(&mpic_lock, flags);
}
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index efda0028909..047b31027fa 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -127,7 +127,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
if (err)
return err;
- prop = of_get_property(np, "block-index", NULL);
+ prop = of_get_property(np, "cell-index", NULL);
if (!prop)
return -ENODEV;
port_number = *(int *)prop;
@@ -136,6 +136,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
pdata.cache_mgmt = 1; /* All current revs need this set */
+ pdata.max_idle = 40; /* default */
prop = of_get_property(np, "max_idle", NULL);
if (prop)
pdata.max_idle = *prop;
@@ -205,30 +206,24 @@ error:
/*
* Create mv64x60_eth platform devices
*/
-static int __init eth_register_shared_pdev(struct device_node *np)
+static struct platform_device * __init mv64x60_eth_register_shared_pdev(
+ struct device_node *np, int id)
{
struct platform_device *pdev;
struct resource r[1];
int err;
- np = of_get_parent(np);
- if (!np)
- return -ENODEV;
-
err = of_address_to_resource(np, 0, &r[0]);
- of_node_put(np);
if (err)
- return err;
+ return ERR_PTR(err);
- pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
+ pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
r, 1);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return 0;
+ return pdev;
}
-static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
+static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
+ struct platform_device *shared_pdev)
{
struct resource r[1];
struct mv643xx_eth_platform_data pdata;
@@ -239,16 +234,12 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
const phandle *ph;
int err;
- /* only register the shared platform device the first time through */
- if (id == 0 && (err = eth_register_shared_pdev(np)))
- return err;
-
memset(r, 0, sizeof(r));
of_irq_to_resource(np, 0, &r[0]);
memset(&pdata, 0, sizeof(pdata));
- prop = of_get_property(np, "block-index", NULL);
+ prop = of_get_property(np, "reg", NULL);
if (!prop)
return -ENODEV;
pdata.port_number = *prop;
@@ -301,7 +292,7 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
of_node_put(phy);
- pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
+ pdev = platform_device_alloc(MV643XX_ETH_NAME, id);
if (!pdev)
return -ENOMEM;
@@ -345,21 +336,19 @@ static int __init mv64x60_i2c_device_setup(struct device_node *np, int id)
memset(&pdata, 0, sizeof(pdata));
+ pdata.freq_m = 8; /* default */
prop = of_get_property(np, "freq_m", NULL);
if (!prop)
return -ENODEV;
pdata.freq_m = *prop;
+ pdata.freq_m = 3; /* default */
prop = of_get_property(np, "freq_n", NULL);
if (!prop)
return -ENODEV;
pdata.freq_n = *prop;
- prop = of_get_property(np, "timeout", NULL);
- if (prop)
- pdata.timeout = *prop;
- else
- pdata.timeout = 1000; /* 1 second */
+ pdata.timeout = 1000; /* default: 1 second */
pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
if (!pdev)
@@ -401,10 +390,7 @@ static int __init mv64x60_wdt_device_setup(struct device_node *np, int id)
memset(&pdata, 0, sizeof(pdata));
- prop = of_get_property(np, "timeout", NULL);
- if (!prop)
- return -ENODEV;
- pdata.timeout = *prop;
+ pdata.timeout = 10; /* Default: 10 seconds */
np = of_get_parent(np);
if (!np)
@@ -441,27 +427,43 @@ error:
static int __init mv64x60_device_setup(void)
{
- struct device_node *np = NULL;
- int id;
+ struct device_node *np, *np2;
+ struct platform_device *pdev;
+ int id, id2;
int err;
id = 0;
- for_each_compatible_node(np, "serial", "marvell,mpsc")
+ for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc")
if ((err = mv64x60_mpsc_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
- if ((err = mv64x60_eth_device_setup(np, id++)))
+ id2 = 0;
+ for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") {
+ pdev = mv64x60_eth_register_shared_pdev(np, id++);
+ if (IS_ERR(pdev)) {
+ err = PTR_ERR(pdev);
goto error;
+ }
+ for_each_child_of_node(np, np2) {
+ if (!of_device_is_compatible(np2,
+ "marvell,mv64360-eth"))
+ continue;
+ err = mv64x60_eth_device_setup(np2, id2++, pdev);
+ if (err) {
+ of_node_put(np2);
+ goto error;
+ }
+ }
+ }
id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+ for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c")
if ((err = mv64x60_i2c_device_setup(np, id++)))
goto error;
/* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
+ np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
if (np) {
if ((err = mv64x60_wdt_device_setup(np, id)))
goto error;
@@ -489,10 +491,10 @@ static int __init mv64x60_add_mpsc_console(void)
if (!np)
goto not_mpsc;
- if (!of_device_is_compatible(np, "marvell,mpsc"))
+ if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
goto not_mpsc;
- prop = of_get_property(np, "block-index", NULL);
+ prop = of_get_property(np, "cell-index", NULL);
if (!prop)
goto not_mpsc;
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index d21ab8fa499..1456015a22d 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(void)
struct platform_device *pdev;
const unsigned int *prop;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
- pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+ pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
{
struct device_node *np;
- for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
+ for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
mv64x60_add_bridge(np);
}
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index 19e6ef26379..2aa4ed066db 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
const unsigned int *reg;
unsigned long flags;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
of_node_put(np);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c
index 35c77c7d061..ccdb3b0418f 100644
--- a/arch/powerpc/sysdev/mv64x60_udbg.c
+++ b/arch/powerpc/sysdev/mv64x60_udbg.c
@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
if (!stdout)
return;
- for_each_compatible_node(np, "serial", "marvell,mpsc") {
+ for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
if (np == stdout)
break;
}
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 5abfcd15748..1814adbd223 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -527,6 +527,7 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
*
* ibm,plb-pciex-440spe
* ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
*
* Anything else will be rejected for now as they are all subtly
* different unfortunately.
@@ -645,7 +646,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np)
int time_out = 20;
/* Set PLL clock receiver to LVPECL */
- mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
/* Shouldn't we do all the calibration stuff etc... here ? */
if (ppc440spe_pciex_check_reset(np))
@@ -659,8 +660,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np)
}
/* De-assert reset of PCIe PLL, wait for lock */
- mtdcri(SDR0, PESDR0_PLLLCT1,
- mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
udelay(3);
while (time_out) {
@@ -712,9 +712,8 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
0x35000000);
}
- val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (1 << 24) | (1 << 16), 1 << 12);
return 0;
}
@@ -775,6 +774,115 @@ static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
.setup_utl = ppc440speB_pciex_init_utl,
};
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+ u32 utlset1;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+ switch (port->index) {
+ case 0:
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ /* XXX FIXME add timeout */
+ switch (port->index) {
+ case 0:
+ while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return 0;
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x0800000c);
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+ .core_init = ppc460ex_pciex_core_init,
+ .port_init_hw = ppc460ex_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+};
+
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
@@ -830,17 +938,9 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
* PCIe boards don't show this problem.
* This has to be re-tested and fixed in a later release!
*/
-#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
- * configured as done previously by U-Boot. Then Linux will currently
- * not reassign them. So the PHY reset is now done always. This will
- * lead to problems with the Atheros PCIe board again.
- */
val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
if (!(val & 0x00001000))
ppc405ex_pcie_phy_reset(port);
-#else
- ppc405ex_pcie_phy_reset(port);
-#endif
dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
@@ -896,6 +996,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
else
ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
}
+ if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+ ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
@@ -1042,8 +1144,7 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
port->link = 0;
}
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
msleep(100);
return 0;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 1c07908dc6e..d04e40b306f 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -271,6 +271,59 @@
#define PESDR1_405EX_PHYSTA 0x044C
/*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST 0x0308
+#define PESDR0_460EX_L0BISTSTS 0x0309
+#define PESDR0_460EX_L0CDRCTL 0x030A
+#define PESDR0_460EX_L0DRV 0x030B
+#define PESDR0_460EX_L0REC 0x030C
+#define PESDR0_460EX_L0LPB 0x030D
+#define PESDR0_460EX_L0CLK 0x030E
+#define PESDR0_460EX_PHY_CTL_RST 0x030F
+#define PESDR0_460EX_RSTSTA 0x0310
+#define PESDR0_460EX_OBS 0x0311
+#define PESDR0_460EX_L0ERRC 0x0320
+
+#define PESDR1_460EX_L0BIST 0x0348
+#define PESDR1_460EX_L1BIST 0x0349
+#define PESDR1_460EX_L2BIST 0x034A
+#define PESDR1_460EX_L3BIST 0x034B
+#define PESDR1_460EX_L0BISTSTS 0x034C
+#define PESDR1_460EX_L1BISTSTS 0x034D
+#define PESDR1_460EX_L2BISTSTS 0x034E
+#define PESDR1_460EX_L3BISTSTS 0x034F
+#define PESDR1_460EX_L0CDRCTL 0x0350
+#define PESDR1_460EX_L1CDRCTL 0x0351
+#define PESDR1_460EX_L2CDRCTL 0x0352
+#define PESDR1_460EX_L3CDRCTL 0x0353
+#define PESDR1_460EX_L0DRV 0x0354
+#define PESDR1_460EX_L1DRV 0x0355
+#define PESDR1_460EX_L2DRV 0x0356
+#define PESDR1_460EX_L3DRV 0x0357
+#define PESDR1_460EX_L0REC 0x0358
+#define PESDR1_460EX_L1REC 0x0359
+#define PESDR1_460EX_L2REC 0x035A
+#define PESDR1_460EX_L3REC 0x035B
+#define PESDR1_460EX_L0LPB 0x035C
+#define PESDR1_460EX_L1LPB 0x035D
+#define PESDR1_460EX_L2LPB 0x035E
+#define PESDR1_460EX_L3LPB 0x035F
+#define PESDR1_460EX_L0CLK 0x0360
+#define PESDR1_460EX_L1CLK 0x0361
+#define PESDR1_460EX_L2CLK 0x0362
+#define PESDR1_460EX_L3CLK 0x0363
+#define PESDR1_460EX_PHY_CTL_RST 0x0364
+#define PESDR1_460EX_RSTSTA 0x0365
+#define PESDR1_460EX_OBS 0x0366
+#define PESDR1_460EX_L0ERRC 0x0368
+#define PESDR1_460EX_L1ERRC 0x0369
+#define PESDR1_460EX_L2ERRC 0x036A
+#define PESDR1_460EX_L3ERRC 0x036B
+#define PESDR0_460EX_IHS1 0x036C
+#define PESDR0_460EX_IHS2 0x036D
+
+/*
* Of the above, some are common offsets from the base
*/
#define PESDRn_UTLSET1 0x00
@@ -353,6 +406,12 @@
#define PECFG_POM2LAL 0x390
#define PECFG_POM2LAH 0x394
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
enum
{
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
new file mode 100644
index 00000000000..5b32adc9a9b
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -0,0 +1,200 @@
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003 - 2006 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+ u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+ if (sr & L2C_SR_CPE) {
+ /* Read cache trapped address */
+ u32 addr = l2c_diag(0x42000000);
+ printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+ if (sr & L2C_SR_TPE) {
+ /* Read tag trapped address */
+ u32 addr = l2c_diag(0x82000000) >> 16;
+ printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+
+ /* Clear parity errors */
+ if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+ } else {
+ printk(KERN_EMERG "L2C: LRU error\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+ struct device_node *np;
+ u32 r;
+ unsigned long flags;
+ int irq;
+ const u32 *dcrreg;
+ u32 dcrbase_isram;
+ int len;
+ const u32 *prop;
+ u32 l2_size;
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+ if (!np)
+ return 0;
+
+ /* Get l2 cache size */
+ prop = of_get_property(np, "cache-size", NULL);
+ if (prop == NULL) {
+ printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ l2_size = prop[0];
+
+ /* Map DCRs */
+ dcrreg = of_get_property(np, "dcr-reg", &len);
+ if (!dcrreg || (len != 4 * sizeof(u32))) {
+ printk(KERN_ERR "%s: Can't get DCR register base !",
+ np->full_name);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ dcrbase_isram = dcrreg[0];
+ dcrbase_l2c = dcrreg[2];
+
+ /* Get and map irq number from device tree */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "irq_of_parse_and_map failed\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ /* Install error handler */
+ if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+ printk(KERN_ERR "Cannot install L2C error handler"
+ ", cache is not enabled\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ local_irq_save(flags);
+ asm volatile ("sync" ::: "memory");
+
+ /* Disable SRAM */
+ mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+ /* Enable L2_MODE without ICU/DCU */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+ ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+ r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+ /* Hardware Clear Command */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ /* Clear Cache Parity and Tag Errors */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+ /* Enable 64G snoop region starting at 0 */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+ asm volatile ("sync" ::: "memory");
+
+ /* Enable ICU/DCU ports */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+ r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+ | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+ r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+ | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+ /* Check for 460EX/GT special handling */
+ if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+ r |= L2C_CFG_RDBW;
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ asm volatile ("sync; isync" ::: "memory");
+ local_irq_restore(flags);
+
+ printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+ of_node_put(np);
+ return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * At present, this routine just applies a system reset.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+ while (1)
+ ; /* Just in case the reset doesn't work */
+}
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index cc81fd1141b..cff550eec7e 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -55,7 +55,7 @@ struct qe_snum {
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
-struct qe_immap *qe_immr = NULL;
+struct qe_immap __iomem *qe_immr;
EXPORT_SYMBOL(qe_immr);
static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
@@ -156,7 +156,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
*/
static unsigned int brg_clk = 0;
-unsigned int get_brg_clk(void)
+unsigned int qe_get_brg_clk(void)
{
struct device_node *qe;
unsigned int size;
@@ -180,6 +180,7 @@ unsigned int get_brg_clk(void)
return brg_clk;
}
+EXPORT_SYMBOL(qe_get_brg_clk);
/* Program the BRG to the given sampling rate and multiplier
*
@@ -197,7 +198,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
if ((brg < QE_BRG1) || (brg > QE_BRG16))
return -EINVAL;
- divisor = get_brg_clk() / (rate * multiplier);
+ divisor = qe_get_brg_clk() / (rate * multiplier);
if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
div16 = QE_BRGC_DIV16;
@@ -415,12 +416,6 @@ void qe_muram_dump(void)
}
EXPORT_SYMBOL(qe_muram_dump);
-void *qe_muram_addr(unsigned long offset)
-{
- return (void *)&qe_immr->muram[offset];
-}
-EXPORT_SYMBOL(qe_muram_addr);
-
/* The maximum number of RISCs we support */
#define MAX_QE_RISC 2
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e53ea4d374a..93916a48afe 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -22,6 +22,7 @@
#include <linux/ioport.h>
#include <asm/io.h>
+#include <asm/qe.h>
#include <asm/prom.h>
#include <sysdev/fsl_soc.h>
@@ -41,7 +42,7 @@ struct port_regs {
#endif
};
-static struct port_regs *par_io = NULL;
+static struct port_regs __iomem *par_io;
static int num_par_io_ports = 0;
int par_io_init(struct device_node *np)
@@ -165,7 +166,7 @@ int par_io_of_config(struct device_node *np)
}
ph = of_get_property(np, "pio-handle", NULL);
- if (ph == 0) {
+ if (ph == NULL) {
printk(KERN_ERR "pio-handle not available \n");
return -1;
}
@@ -200,7 +201,7 @@ static void dump_par_io(void)
{
unsigned int i;
- printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
+ printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
for (i = 0; i < num_par_io_ports; i++) {
printk(KERN_INFO " cpodr[%u]=%08x\n", i,
in_be32(&par_io[i].cpodr));
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3223acbc39e..bcf88e6ce96 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -148,57 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is too small\n", __func__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
@@ -207,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* Set the PHY base address */
uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
return -ENOMEM;
}
@@ -230,7 +230,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* Set UCC to fast type */
ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
ucc_fast_free(uccf);
return ret;
}
@@ -270,7 +270,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
- __FUNCTION__);
+ __func__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -283,7 +283,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
- __FUNCTION__);
+ __func__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -314,7 +314,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
- __FUNCTION__);
+ __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
@@ -323,7 +323,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
- __FUNCTION__);
+ __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index b2870b208dd..a578bc77b9d 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -142,7 +142,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
@@ -161,7 +161,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
@@ -170,7 +170,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Set the PHY base address */
uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
if (uccs->us_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
return -ENOMEM;
}
@@ -189,7 +189,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->us_pram_offset =
qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
if (IS_ERR_VALUE(uccs->us_pram_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
ucc_slow_free(uccs);
return -ENOMEM;
}
@@ -202,7 +202,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Set UCC to slow type */
ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot set UCC type", __func__);
ucc_slow_free(uccs);
return ret;
}
@@ -216,7 +216,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->rx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
us_info->rx_bd_ring_len);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
@@ -227,7 +227,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->tx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
@@ -317,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
- __FUNCTION__);
+ __func__);
ucc_slow_free(uccs);
return -EINVAL;
}
@@ -325,7 +325,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
- __FUNCTION__);
+ __func__);
ucc_slow_free(uccs);
return -EINVAL;
}
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index 0c9ac7ee08f..c09ddc0dbeb 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -56,3 +56,5 @@ static int __init add_rtc(void)
return 0;
}
fs_initcall(add_rtc);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index be2808a292f..d4d15aaf18f 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -84,7 +84,7 @@ static int __init tsi108_eth_of_init(void)
ret = of_address_to_resource(np, 0, &r[0]);
DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
- __FUNCTION__,r[0].name, r[0].start, r[0].end);
+ __func__,r[0].name, r[0].start, r[0].end);
if (ret)
goto err;
@@ -93,7 +93,7 @@ static int __init tsi108_eth_of_init(void)
r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
- __FUNCTION__,r[1].name, r[1].start, r[1].end);
+ __func__,r[1].name, r[1].start, r[1].end);
tsi_eth_dev =
platform_device_register_simple("tsi-ethernet", i++, &r[0],
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 31d3d33d91f..ac1a72dc21e 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -207,7 +207,7 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
/* PCI Config mapping */
tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
tsi108_pci_cfg_phys = cfg_phys;
- DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+ DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
tsi108_pci_cfg_base);
/* Fetch host bridge registers address */
@@ -395,7 +395,7 @@ static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{ unsigned int irq;
- DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+ DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
if ((virq >= 1) && (virq <= 4)){
irq = virq + IRQ_PCI_INTAD_BASE - 1;
get_irq_desc(irq)->status |= IRQ_LEVEL;
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a34172ddc46..52c74780f40 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -45,7 +45,6 @@
#ifdef CONFIG_PPC64
#include <asm/hvcall.h>
#include <asm/paca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#endif
#include "nonstdio.h"
@@ -1244,15 +1243,12 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp,
static int xmon_depth_to_print = 64;
-#ifdef CONFIG_PPC64
-#define LRSAVE_OFFSET 0x10
-#define REG_FRAME_MARKER 0x7265677368657265ul /* "regshere" */
-#define MARKER_OFFSET 0x60
+#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long))
+#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long))
+
+#ifdef __powerpc64__
#define REGS_OFFSET 0x70
#else
-#define LRSAVE_OFFSET 4
-#define REG_FRAME_MARKER 0x72656773
-#define MARKER_OFFSET 8
#define REGS_OFFSET 16
#endif
@@ -1318,7 +1314,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
/* Look for "regshere" marker to see if this is
an exception frame. */
if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
- && marker == REG_FRAME_MARKER) {
+ && marker == STACK_FRAME_REGS_MARKER) {
if (mread(sp + REGS_OFFSET, &regs, sizeof(regs))
!= sizeof(regs)) {
printf("Couldn't read registers at %lx\n",
@@ -1598,7 +1594,6 @@ void super_regs(void)
if (firmware_has_feature(FW_FEATURE_ISERIES)) {
struct paca_struct *ptrPaca;
struct lppaca *ptrLpPaca;
- struct ItLpRegSave *ptrLpRegSave;
/* Dump out relevant Paca data areas. */
printf("Paca: \n");
@@ -1611,15 +1606,6 @@ void super_regs(void)
printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n",
ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
-
- printf(" Local Processor Register Save Area (LpRegSave): \n");
- ptrLpRegSave = ptrPaca->reg_save_ptr;
- printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n",
- ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0);
- printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n",
- ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3);
- printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n",
- ptrLpRegSave->xMSR, ptrLpRegSave->xNIA);
}
#endif
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 9d656de0f0f..752443df5ec 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -43,7 +43,7 @@
({ \
u32 offset = offsetof(immap_t, member); \
void *addr = ioremap (IMAP_ADDR + offset, \
- sizeof( ((immap_t*)0)->member)); \
+ FIELD_SIZEOF(immap_t, member)); \
addr; \
})
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index 11b0aa6ca97..1d4b49ad0d7 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -520,7 +520,7 @@ fec_enet_interrupt(int irq, void * dev_id)
#ifdef CONFIG_USE_MDIO
fec_enet_mii(dev);
#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
#endif /* CONFIG_USE_MDIO */
}
@@ -1441,7 +1441,7 @@ irqreturn_t mii_link_interrupt(int irq, void * dev_id)
fecp->fec_ecntrl = ecntrl; /* restore old settings */
}
#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
#endif /* CONFIG_USE_MDIO */
#ifndef CONFIG_RPXCLASSIC
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 1b0ec7202dd..e7e642b9513 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -701,23 +701,6 @@ load_up_altivec:
b fast_exception_return
/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
-/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
* and save the AltiVec registers in its thread_struct.
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 7444df3889c..1a63711081b 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -109,7 +109,6 @@ void show_mem(void)
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
i = max_mapnr;
while (i-- > 0) {
total++;
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 179b4a99b5b..f1dee1e8780 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -511,7 +511,7 @@ static void __init ppc7d_init_irq(void)
{
int irq;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
i8259_init(0, 0);
mv64360_init_irq();
@@ -568,7 +568,7 @@ static int __init ppc7d_map_irq(struct pci_dev *dev, unsigned char idsel,
};
const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
- pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __FUNCTION__,
+ pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
return PCI_IRQ_TABLE_LOOKUP;
@@ -1299,7 +1299,7 @@ static void ppc7d_init2(void)
u32 data;
u8 data8;
- pr_debug("%s: enter\n", __FUNCTION__);
+ pr_debug("%s: enter\n", __func__);
/* Wait for debugger? */
if (ppc7d_wait_debugger) {
@@ -1332,7 +1332,7 @@ static void ppc7d_init2(void)
ppc_md.set_rtc_time = ppc7d_set_rtc_time;
ppc_md.get_rtc_time = ppc7d_get_rtc_time;
- pr_debug("%s: exit\n", __FUNCTION__);
+ pr_debug("%s: exit\n", __func__);
}
/* Called from machine_init(), early, before any of the __init functions
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 9f504fc7693..ab0cf4ced9e 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -279,7 +279,7 @@ int mpc52xx_match_psc_function(int psc_idx, const char *func)
int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
struct mpc52xx_cdm __iomem *cdm;
unsigned long flags;
u16 mclken_div;
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 463d1be32c9..2667a9dee11 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -16,6 +16,7 @@ config SPARC64
bool
default y
select HAVE_IDE
+ select HAVE_LMB
help
SPARC is a family of RISC microprocessors designed and marketed by
Sun Microsystems, incorporated. This port covers the newer 64-bit
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 41ca721d252..ebfe038d859 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -69,7 +69,7 @@ MODULE_LICENSE("GPL");
enum {
PARTITION_SHIFT = 3,
MAX_DISKNO = HVMAXARCHITECTEDVIRTUALDISKS,
- MAX_DISK_NAME = sizeof(((struct gendisk *)0)->disk_name)
+ MAX_DISK_NAME = FIELD_SIZEOF(struct gendisk, disk_name)
};
static DEFINE_SPINLOCK(viodasd_spinlock);
diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c
index e74bb949c28..91cdb35a920 100644
--- a/drivers/char/hvc_beat.c
+++ b/drivers/char/hvc_beat.c
@@ -78,8 +78,8 @@ static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt)
for (rest = cnt; rest > 0; rest -= nlen) {
nlen = (rest > 16) ? 16 : rest;
memcpy(kb, buf, nlen);
- beat_put_term_char(vtermno, rest, kb[0], kb[1]);
- rest -= nlen;
+ beat_put_term_char(vtermno, nlen, kb[0], kb[1]);
+ buf += nlen;
}
return cnt;
}
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index f577daedb63..aa7f7962a9a 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -74,7 +74,7 @@
/**
* buffer_icap_get_status - Get the contents of the status register.
- * @base_address: is the base address of the device
+ * @drvdata: a pointer to the drvdata.
*
* The status register contains the ICAP status and the done bit.
*
@@ -88,9 +88,9 @@
* D1 - Always 1
* D0 - Done bit
**/
-static inline u32 buffer_icap_get_status(void __iomem *base_address)
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata)
{
- return in_be32(base_address + XHI_STATUS_REG_OFFSET);
+ return in_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET);
}
/**
@@ -117,20 +117,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address,
**/
static inline bool buffer_icap_busy(void __iomem *base_address)
{
- return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
-}
-
-/**
- * buffer_icap_busy - Return true if the icap device is not busy
- * @base_address: is the base address of the device
- *
- * The queries the low order bit of the status register, which
- * indicates whether the current configuration or readback operation
- * has completed.
- **/
-static inline bool buffer_icap_done(void __iomem *base_address)
-{
- return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
+ u32 status = in_be32(base_address + XHI_STATUS_REG_OFFSET);
+ return (status & 1) == XHI_NOT_FINISHED;
}
/**
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 03184959fa0..c5b1840906b 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -44,8 +44,6 @@
#include <asm/io.h>
#include "xilinx_hwicap.h"
-void buffer_icap_reset(struct hwicap_drvdata *drvdata);
-
/* Loads a partial bitstream from system memory. */
int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 Size);
@@ -54,4 +52,7 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 Size);
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata);
+void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+
#endif
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 6f45dbd4712..776b5052847 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -78,13 +78,6 @@
#define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
#define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
-/* Status Register (SR) */
-#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
-#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
-#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
-#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
-#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
-
#define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
#define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
@@ -152,13 +145,35 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
}
/**
+ * fifo_icap_get_status - Get the contents of the status register.
+ * @drvdata: a pointer to the drvdata.
+ *
+ * The status register contains the ICAP status and the done bit.
+ *
+ * D8 - cfgerr
+ * D7 - dalign
+ * D6 - rip
+ * D5 - in_abort_l
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - Done bit
+ **/
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata)
+{
+ u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+ dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+ return status;
+}
+
+/**
* fifo_icap_busy - Return true if the ICAP is still processing a transaction.
* @drvdata: a pointer to the drvdata.
**/
static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
{
u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
- dev_dbg(drvdata->dev, "Getting status = %x\n", status);
return (status & XHI_SR_DONE_MASK) ? 0 : 1;
}
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 4d3068dd040..ffabd3ba2bd 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -56,6 +56,7 @@ int fifo_icap_set_configuration(
u32 *FrameBuffer,
u32 NumWords);
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata);
void fifo_icap_reset(struct hwicap_drvdata *drvdata);
void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 2284fa2a5a5..016f90567a5 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -36,7 +36,7 @@
*****************************************************************************/
/*
- * This is the code behind /dev/xilinx_icap -- it allows a user-space
+ * This is the code behind /dev/icap* -- it allows a user-space
* application to use the Xilinx ICAP subsystem.
*
* The following operations are possible:
@@ -67,7 +67,7 @@
* user-space application code that uses this device. The simplest
* way to use this interface is simply:
*
- * cp foo.bit /dev/xilinx_icap
+ * cp foo.bit /dev/icap0
*
* Note that unless foo.bit is an appropriately constructed partial
* bitstream, this has a high likelyhood of overwriting the design
@@ -105,18 +105,14 @@
#include "buffer_icap.h"
#include "fifo_icap.h"
-#define DRIVER_NAME "xilinx_icap"
+#define DRIVER_NAME "icap"
#define HWICAP_REGS (0x10000)
-/* dynamically allocate device number */
-static int xhwicap_major;
-static int xhwicap_minor;
+#define XHWICAP_MAJOR 259
+#define XHWICAP_MINOR 0
#define HWICAP_DEVICES 1
-module_param(xhwicap_major, int, S_IRUGO);
-module_param(xhwicap_minor, int, S_IRUGO);
-
/* An array, which is set to true when the device is registered. */
static bool probed_devices[HWICAP_DEVICES];
static struct mutex icap_sem;
@@ -250,8 +246,26 @@ static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
* Create the data to be written to the ICAP.
*/
buffer[index++] = XHI_DUMMY_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
buffer[index++] = XHI_SYNC_PACKET;
buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+
+ /*
+ * Write the data to the FIFO and initiate the transfer of data present
+ * in the FIFO to the ICAP device.
+ */
+ status = drvdata->config->set_configuration(drvdata,
+ &buffer[0], index);
+ if (status)
+ return status;
+
+ /* If the syncword was not found, then we need to start over. */
+ status = drvdata->config->get_status(drvdata);
+ if ((status & XHI_SR_DALIGN_MASK) != XHI_SR_DALIGN_MASK)
+ return -EIO;
+
+ index = 0;
buffer[index++] = hwicap_type_1_read(reg) | 1;
buffer[index++] = XHI_NOOP_PACKET;
buffer[index++] = XHI_NOOP_PACKET;
@@ -587,7 +601,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
probed_devices[id] = 1;
mutex_unlock(&icap_sem);
- devt = MKDEV(xhwicap_major, xhwicap_minor + id);
+ devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id);
drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
if (!drvdata) {
@@ -664,12 +678,14 @@ static int __devinit hwicap_setup(struct device *dev, int id,
static struct hwicap_driver_config buffer_icap_config = {
.get_configuration = buffer_icap_get_configuration,
.set_configuration = buffer_icap_set_configuration,
+ .get_status = buffer_icap_get_status,
.reset = buffer_icap_reset,
};
static struct hwicap_driver_config fifo_icap_config = {
.get_configuration = fifo_icap_get_configuration,
.set_configuration = fifo_icap_set_configuration,
+ .get_status = fifo_icap_get_status,
.reset = fifo_icap_reset,
};
@@ -690,7 +706,7 @@ static int __devexit hwicap_remove(struct device *dev)
dev_set_drvdata(dev, NULL);
mutex_lock(&icap_sem);
- probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+ probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
mutex_unlock(&icap_sem);
return 0; /* success */
}
@@ -830,23 +846,12 @@ static int __init hwicap_module_init(void)
icap_class = class_create(THIS_MODULE, "xilinx_config");
mutex_init(&icap_sem);
- if (xhwicap_major) {
- devt = MKDEV(xhwicap_major, xhwicap_minor);
- retval = register_chrdev_region(
- devt,
- HWICAP_DEVICES,
- DRIVER_NAME);
- if (retval < 0)
- return retval;
- } else {
- retval = alloc_chrdev_region(&devt,
- xhwicap_minor,
- HWICAP_DEVICES,
- DRIVER_NAME);
- if (retval < 0)
- return retval;
- xhwicap_major = MAJOR(devt);
- }
+ devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
+ retval = register_chrdev_region(devt,
+ HWICAP_DEVICES,
+ DRIVER_NAME);
+ if (retval < 0)
+ return retval;
retval = platform_driver_register(&hwicap_platform_driver);
@@ -871,7 +876,7 @@ static int __init hwicap_module_init(void)
static void __exit hwicap_module_cleanup(void)
{
- dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
+ dev_t devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
class_destroy(icap_class);
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 405fee7e189..1f9c8b082db 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -65,10 +65,27 @@ struct hwicap_drvdata {
};
struct hwicap_driver_config {
+ /* Read configuration data given by size into the data buffer.
+ Return 0 if successful. */
int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
+ /* Write configuration data given by size from the data buffer.
+ Return 0 if successful. */
int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
+ /* Get the status register, bit pattern given by:
+ * D8 - 0 = configuration error
+ * D7 - 1 = alignment found
+ * D6 - 1 = readback in progress
+ * D5 - 0 = abort in progress
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - 1 = operation completed
+ */
+ u32 (*get_status)(struct hwicap_drvdata *drvdata);
+ /* Reset the hw */
void (*reset)(struct hwicap_drvdata *drvdata);
};
@@ -163,6 +180,13 @@ struct config_registers {
/* Constant to use for CRC check when CRC has been disabled */
#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL
+/* Meanings of the bits returned by get_status */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
+
/**
* hwicap_type_1_read - Generates a Type 1 read packet header.
* @reg: is the address of the register to be read back.
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index b025dfe0b27..378b7aa6381 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -36,207 +36,12 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-
+#include <asm/fsl_lbc.h>
#define MAX_BANKS 8
#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
-struct elbc_bank {
- __be32 br; /**< Base Register */
-#define BR_BA 0xFFFF8000
-#define BR_BA_SHIFT 15
-#define BR_PS 0x00001800
-#define BR_PS_SHIFT 11
-#define BR_PS_8 0x00000800 /* Port Size 8 bit */
-#define BR_PS_16 0x00001000 /* Port Size 16 bit */
-#define BR_PS_32 0x00001800 /* Port Size 32 bit */
-#define BR_DECC 0x00000600
-#define BR_DECC_SHIFT 9
-#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */
-#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */
-#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */
-#define BR_WP 0x00000100
-#define BR_WP_SHIFT 8
-#define BR_MSEL 0x000000E0
-#define BR_MSEL_SHIFT 5
-#define BR_MS_GPCM 0x00000000 /* GPCM */
-#define BR_MS_FCM 0x00000020 /* FCM */
-#define BR_MS_SDRAM 0x00000060 /* SDRAM */
-#define BR_MS_UPMA 0x00000080 /* UPMA */
-#define BR_MS_UPMB 0x000000A0 /* UPMB */
-#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#define BR_V 0x00000001
-#define BR_V_SHIFT 0
-#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
-
- __be32 or; /**< Base Register */
-#define OR0 0x5004
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_FCM_AM 0xFFFF8000
-#define OR_FCM_AM_SHIFT 15
-#define OR_FCM_BCTLD 0x00001000
-#define OR_FCM_BCTLD_SHIFT 12
-#define OR_FCM_PGS 0x00000400
-#define OR_FCM_PGS_SHIFT 10
-#define OR_FCM_CSCT 0x00000200
-#define OR_FCM_CSCT_SHIFT 9
-#define OR_FCM_CST 0x00000100
-#define OR_FCM_CST_SHIFT 8
-#define OR_FCM_CHT 0x00000080
-#define OR_FCM_CHT_SHIFT 7
-#define OR_FCM_SCY 0x00000070
-#define OR_FCM_SCY_SHIFT 4
-#define OR_FCM_SCY_1 0x00000010
-#define OR_FCM_SCY_2 0x00000020
-#define OR_FCM_SCY_3 0x00000030
-#define OR_FCM_SCY_4 0x00000040
-#define OR_FCM_SCY_5 0x00000050
-#define OR_FCM_SCY_6 0x00000060
-#define OR_FCM_SCY_7 0x00000070
-#define OR_FCM_RST 0x00000008
-#define OR_FCM_RST_SHIFT 3
-#define OR_FCM_TRLX 0x00000004
-#define OR_FCM_TRLX_SHIFT 2
-#define OR_FCM_EHTR 0x00000002
-#define OR_FCM_EHTR_SHIFT 1
-};
-
-struct elbc_regs {
- struct elbc_bank bank[8];
- u8 res0[0x28];
- __be32 mar; /**< UPM Address Register */
- u8 res1[0x4];
- __be32 mamr; /**< UPMA Mode Register */
- __be32 mbmr; /**< UPMB Mode Register */
- __be32 mcmr; /**< UPMC Mode Register */
- u8 res2[0x8];
- __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
- __be32 mdr; /**< UPM Data Register */
- u8 res3[0x4];
- __be32 lsor; /**< Special Operation Initiation Register */
- __be32 lsdmr; /**< SDRAM Mode Register */
- u8 res4[0x8];
- __be32 lurt; /**< UPM Refresh Timer */
- __be32 lsrt; /**< SDRAM Refresh Timer */
- u8 res5[0x8];
- __be32 ltesr; /**< Transfer Error Status Register */
-#define LTESR_BM 0x80000000
-#define LTESR_FCT 0x40000000
-#define LTESR_PAR 0x20000000
-#define LTESR_WP 0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS 0x00080000
-#define LTESR_CC 0x00000001
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
- __be32 ltedr; /**< Transfer Error Disable Register */
- __be32 lteir; /**< Transfer Error Interrupt Register */
- __be32 lteatr; /**< Transfer Error Attributes Register */
- __be32 ltear; /**< Transfer Error Address Register */
- u8 res6[0xC];
- __be32 lbcr; /**< Configuration Register */
-#define LBCR_LDIS 0x80000000
-#define LBCR_LDIS_SHIFT 31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT 22
-#define LBCR_AHD 0x00200000
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT 17
-#define LBCR_EPAR 0x00010000
-#define LBCR_EPAR_SHIFT 16
-#define LBCR_BMT 0x0000FF00
-#define LBCR_BMT_SHIFT 8
-#define LBCR_INIT 0x00040000
- __be32 lcrr; /**< Clock Ratio Register */
-#define LCRR_DBYP 0x80000000
-#define LCRR_DBYP_SHIFT 31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT 28
-#define LCRR_ECL 0x03000000
-#define LCRR_ECL_SHIFT 24
-#define LCRR_EADC 0x00030000
-#define LCRR_EADC_SHIFT 16
-#define LCRR_CLKDIV 0x0000000F
-#define LCRR_CLKDIV_SHIFT 0
- u8 res7[0x8];
- __be32 fmr; /**< Flash Mode Register */
-#define FMR_CWTO 0x0000F000
-#define FMR_CWTO_SHIFT 12
-#define FMR_BOOT 0x00000800
-#define FMR_ECCM 0x00000100
-#define FMR_AL 0x00000030
-#define FMR_AL_SHIFT 4
-#define FMR_OP 0x00000003
-#define FMR_OP_SHIFT 0
- __be32 fir; /**< Flash Instruction Register */
-#define FIR_OP0 0xF0000000
-#define FIR_OP0_SHIFT 28
-#define FIR_OP1 0x0F000000
-#define FIR_OP1_SHIFT 24
-#define FIR_OP2 0x00F00000
-#define FIR_OP2_SHIFT 20
-#define FIR_OP3 0x000F0000
-#define FIR_OP3_SHIFT 16
-#define FIR_OP4 0x0000F000
-#define FIR_OP4_SHIFT 12
-#define FIR_OP5 0x00000F00
-#define FIR_OP5_SHIFT 8
-#define FIR_OP6 0x000000F0
-#define FIR_OP6_SHIFT 4
-#define FIR_OP7 0x0000000F
-#define FIR_OP7_SHIFT 0
-#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
-#define FIR_OP_CA 0x1 /* Issue current column address */
-#define FIR_OP_PA 0x2 /* Issue current block+page address */
-#define FIR_OP_UA 0x3 /* Issue user defined address */
-#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
-#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */
- __be32 fcr; /**< Flash Command Register */
-#define FCR_CMD0 0xFF000000
-#define FCR_CMD0_SHIFT 24
-#define FCR_CMD1 0x00FF0000
-#define FCR_CMD1_SHIFT 16
-#define FCR_CMD2 0x0000FF00
-#define FCR_CMD2_SHIFT 8
-#define FCR_CMD3 0x000000FF
-#define FCR_CMD3_SHIFT 0
- __be32 fbar; /**< Flash Block Address Register */
-#define FBAR_BLK 0x00FFFFFF
- __be32 fpar; /**< Flash Page Address Register */
-#define FPAR_SP_PI 0x00007C00
-#define FPAR_SP_PI_SHIFT 10
-#define FPAR_SP_MS 0x00000200
-#define FPAR_SP_CI 0x000001FF
-#define FPAR_SP_CI_SHIFT 0
-#define FPAR_LP_PI 0x0003F000
-#define FPAR_LP_PI_SHIFT 12
-#define FPAR_LP_MS 0x00000800
-#define FPAR_LP_CI 0x000007FF
-#define FPAR_LP_CI_SHIFT 0
- __be32 fbcr; /**< Flash Byte Count Register */
-#define FBCR_BC 0x00000FFF
- u8 res11[0x8];
- u8 res8[0xF00];
-};
-
struct fsl_elbc_ctrl;
/* mtd information per set */
@@ -261,7 +66,7 @@ struct fsl_elbc_ctrl {
/* device info */
struct device *dev;
- struct elbc_regs __iomem *regs;
+ struct fsl_lbc_regs __iomem *regs;
int irq;
wait_queue_head_t irq_wait;
unsigned int irq_status; /* status read from LTESR by irq handler */
@@ -322,7 +127,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
int buf_num;
ctrl->page = page_addr;
@@ -363,7 +168,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
/* Setup the FMR[OP] to execute without write protection */
out_be32(&lbc->fmr, priv->fmr | 3);
@@ -406,7 +211,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
if (priv->page_size) {
out_be32(&lbc->fir,
@@ -439,7 +244,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
ctrl->use_mdr = 0;
@@ -775,7 +580,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
if (ctrl->status != LTESR_CC)
return NAND_STATUS_FAIL;
@@ -807,7 +612,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
/* calculate FMR Address Length field */
@@ -922,7 +727,7 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
{
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
struct nand_chip *chip = &priv->chip;
dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
@@ -986,7 +791,7 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
struct device_node *node)
{
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
struct fsl_elbc_mtd *priv;
struct resource res;
#ifdef CONFIG_MTD_PARTITIONS
@@ -1083,7 +888,7 @@ err:
static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
{
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
/* clear event registers */
setbits32(&lbc->ltesr, LTESR_NAND_MASK);
@@ -1128,7 +933,7 @@ static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
{
struct fsl_elbc_ctrl *ctrl = data;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
if (status) {
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4d71729e85e..2f1f3f2739f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -218,7 +218,8 @@ obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
+pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 58d3bb622da..b8d0639c1cd 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -308,7 +308,8 @@ static void veth_complete_allocation(void *parm, int number)
static int veth_allocate_events(HvLpIndex rlp, int number)
{
- struct veth_allocation vc = { COMPLETION_INITIALIZER(vc.c), 0 };
+ struct veth_allocation vc =
+ { COMPLETION_INITIALIZER_ONSTACK(vc.c), 0 };
mf_allocate_lp_events(rlp, HvLpEvent_Type_VirtualLan,
sizeof(struct veth_lpevent), number,
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index bcd7f9814ed..3b2a6c59808 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -55,15 +55,10 @@
* - Multiqueue RX/TX
*/
-
-/* Must be a power of two */
-#define RX_RING_SIZE 2048
-#define TX_RING_SIZE 4096
-
#define LRO_MAX_AGGR 64
#define PE_MIN_MTU 64
-#define PE_MAX_MTU 1500
+#define PE_MAX_MTU 9000
#define PE_DEF_MTU ETH_DATA_LEN
#define DEFAULT_MSG_ENABLE \
@@ -76,16 +71,6 @@
NETIF_MSG_RX_ERR | \
NETIF_MSG_TX_ERR)
-#define TX_DESC(tx, num) ((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
-#define TX_DESC_INFO(tx, num) ((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
-#define RX_DESC(rx, num) ((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
-#define RX_DESC_INFO(rx, num) ((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
-#define RX_BUFF(rx, num) ((rx)->buffers[(num) & (RX_RING_SIZE-1)])
-
-#define RING_USED(ring) (((ring)->next_to_fill - (ring)->next_to_clean) \
- & ((ring)->size - 1))
-#define RING_AVAIL(ring) ((ring->size) - RING_USED(ring))
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
@@ -94,6 +79,8 @@ static int debug = -1; /* -1 == use DEFAULT_MSG_ENABLE as value */
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
+extern const struct ethtool_ops pasemi_mac_ethtool_ops;
+
static int translation_enabled(void)
{
#if defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
@@ -322,6 +309,104 @@ static int pasemi_mac_unmap_tx_skb(struct pasemi_mac *mac,
return (nfrags + 3) & ~1;
}
+static struct pasemi_mac_csring *pasemi_mac_setup_csring(struct pasemi_mac *mac)
+{
+ struct pasemi_mac_csring *ring;
+ u32 val;
+ unsigned int cfg;
+ int chno;
+
+ ring = pasemi_dma_alloc_chan(TXCHAN, sizeof(struct pasemi_mac_csring),
+ offsetof(struct pasemi_mac_csring, chan));
+
+ if (!ring) {
+ dev_err(&mac->pdev->dev, "Can't allocate checksum channel\n");
+ goto out_chan;
+ }
+
+ chno = ring->chan.chno;
+
+ ring->size = CS_RING_SIZE;
+ ring->next_to_fill = 0;
+
+ /* Allocate descriptors */
+ if (pasemi_dma_alloc_ring(&ring->chan, CS_RING_SIZE))
+ goto out_ring_desc;
+
+ write_dma_reg(PAS_DMA_TXCHAN_BASEL(chno),
+ PAS_DMA_TXCHAN_BASEL_BRBL(ring->chan.ring_dma));
+ val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->chan.ring_dma >> 32);
+ val |= PAS_DMA_TXCHAN_BASEU_SIZ(CS_RING_SIZE >> 3);
+
+ write_dma_reg(PAS_DMA_TXCHAN_BASEU(chno), val);
+
+ ring->events[0] = pasemi_dma_alloc_flag();
+ ring->events[1] = pasemi_dma_alloc_flag();
+ if (ring->events[0] < 0 || ring->events[1] < 0)
+ goto out_flags;
+
+ pasemi_dma_clear_flag(ring->events[0]);
+ pasemi_dma_clear_flag(ring->events[1]);
+
+ ring->fun = pasemi_dma_alloc_fun();
+ if (ring->fun < 0)
+ goto out_fun;
+
+ cfg = PAS_DMA_TXCHAN_CFG_TY_FUNC | PAS_DMA_TXCHAN_CFG_UP |
+ PAS_DMA_TXCHAN_CFG_TATTR(ring->fun) |
+ PAS_DMA_TXCHAN_CFG_LPSQ | PAS_DMA_TXCHAN_CFG_LPDQ;
+
+ if (translation_enabled())
+ cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
+
+ write_dma_reg(PAS_DMA_TXCHAN_CFG(chno), cfg);
+
+ /* enable channel */
+ pasemi_dma_start_chan(&ring->chan, PAS_DMA_TXCHAN_TCMDSTA_SZ |
+ PAS_DMA_TXCHAN_TCMDSTA_DB |
+ PAS_DMA_TXCHAN_TCMDSTA_DE |
+ PAS_DMA_TXCHAN_TCMDSTA_DA);
+
+ return ring;
+
+out_fun:
+out_flags:
+ if (ring->events[0] >= 0)
+ pasemi_dma_free_flag(ring->events[0]);
+ if (ring->events[1] >= 0)
+ pasemi_dma_free_flag(ring->events[1]);
+ pasemi_dma_free_ring(&ring->chan);
+out_ring_desc:
+ pasemi_dma_free_chan(&ring->chan);
+out_chan:
+
+ return NULL;
+}
+
+static void pasemi_mac_setup_csrings(struct pasemi_mac *mac)
+{
+ int i;
+ mac->cs[0] = pasemi_mac_setup_csring(mac);
+ if (mac->type == MAC_TYPE_XAUI)
+ mac->cs[1] = pasemi_mac_setup_csring(mac);
+ else
+ mac->cs[1] = 0;
+
+ for (i = 0; i < MAX_CS; i++)
+ if (mac->cs[i])
+ mac->num_cs++;
+}
+
+static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring)
+{
+ pasemi_dma_stop_chan(&csring->chan);
+ pasemi_dma_free_flag(csring->events[0]);
+ pasemi_dma_free_flag(csring->events[1]);
+ pasemi_dma_free_ring(&csring->chan);
+ pasemi_dma_free_chan(&csring->chan);
+ pasemi_dma_free_fun(csring->fun);
+}
+
static int pasemi_mac_setup_rx_resources(const struct net_device *dev)
{
struct pasemi_mac_rxring *ring;
@@ -445,7 +530,7 @@ pasemi_mac_setup_tx_resources(const struct net_device *dev)
cfg = PAS_DMA_TXCHAN_CFG_TY_IFACE |
PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
PAS_DMA_TXCHAN_CFG_UP |
- PAS_DMA_TXCHAN_CFG_WT(2);
+ PAS_DMA_TXCHAN_CFG_WT(4);
if (translation_enabled())
cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
@@ -810,13 +895,21 @@ restart:
u64 mactx = TX_DESC(txring, i);
struct sk_buff *skb;
- skb = TX_DESC_INFO(txring, i+1).skb;
- nr_frags = TX_DESC_INFO(txring, i).dma;
-
if ((mactx & XCT_MACTX_E) ||
(*chan->status & PAS_STATUS_ERROR))
pasemi_mac_tx_error(mac, mactx);
+ /* Skip over control descriptors */
+ if (!(mactx & XCT_MACTX_LLEN_M)) {
+ TX_DESC(txring, i) = 0;
+ TX_DESC(txring, i+1) = 0;
+ buf_count = 2;
+ continue;
+ }
+
+ skb = TX_DESC_INFO(txring, i+1).skb;
+ nr_frags = TX_DESC_INFO(txring, i).dma;
+
if (unlikely(mactx & XCT_MACTX_O))
/* Not yet transmitted */
break;
@@ -1041,13 +1134,7 @@ static int pasemi_mac_open(struct net_device *dev)
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int flags;
- int ret;
-
- /* enable rx section */
- write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
-
- /* enable tx section */
- write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+ int i, ret;
flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
@@ -1064,6 +1151,19 @@ static int pasemi_mac_open(struct net_device *dev)
if (!mac->tx)
goto out_tx_ring;
+ /* We might already have allocated rings in case mtu was changed
+ * before interface was brought up.
+ */
+ if (dev->mtu > 1500 && !mac->num_cs) {
+ pasemi_mac_setup_csrings(mac);
+ if (!mac->num_cs)
+ goto out_tx_ring;
+ }
+
+ /* Zero out rmon counters */
+ for (i = 0; i < 32; i++)
+ write_mac_reg(mac, PAS_MAC_RMON(i), 0);
+
/* 0x3ff with 33MHz clock is about 31us */
write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
@@ -1247,7 +1347,7 @@ static int pasemi_mac_close(struct net_device *dev)
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int sta;
- int rxch, txch;
+ int rxch, txch, i;
rxch = rx_ring(mac)->chan.chno;
txch = tx_ring(mac)->chan.chno;
@@ -1292,6 +1392,13 @@ static int pasemi_mac_close(struct net_device *dev)
free_irq(mac->tx->chan.irq, mac->tx);
free_irq(mac->rx->chan.irq, mac->rx);
+ for (i = 0; i < mac->num_cs; i++) {
+ pasemi_mac_free_csring(mac->cs[i]);
+ mac->cs[i] = NULL;
+ }
+
+ mac->num_cs = 0;
+
/* Free resources */
pasemi_mac_free_rx_resources(mac);
pasemi_mac_free_tx_resources(mac);
@@ -1299,35 +1406,113 @@ static int pasemi_mac_close(struct net_device *dev)
return 0;
}
+static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
+ const dma_addr_t *map,
+ const unsigned int *map_size,
+ struct pasemi_mac_txring *txring,
+ struct pasemi_mac_csring *csring)
+{
+ u64 fund;
+ dma_addr_t cs_dest;
+ const int nh_off = skb_network_offset(skb);
+ const int nh_len = skb_network_header_len(skb);
+ const int nfrags = skb_shinfo(skb)->nr_frags;
+ int cs_size, i, fill, hdr, cpyhdr, evt;
+ dma_addr_t csdma;
+
+ fund = XCT_FUN_ST | XCT_FUN_RR_8BRES |
+ XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+ XCT_FUN_CRM_SIG | XCT_FUN_LLEN(skb->len - nh_off) |
+ XCT_FUN_SHL(nh_len >> 2) | XCT_FUN_SE;
+
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ fund |= XCT_FUN_SIG_TCP4;
+ /* TCP checksum is 16 bytes into the header */
+ cs_dest = map[0] + skb_transport_offset(skb) + 16;
+ break;
+ case IPPROTO_UDP:
+ fund |= XCT_FUN_SIG_UDP4;
+ /* UDP checksum is 6 bytes into the header */
+ cs_dest = map[0] + skb_transport_offset(skb) + 6;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Do the checksum offloaded */
+ fill = csring->next_to_fill;
+ hdr = fill;
+
+ CS_DESC(csring, fill++) = fund;
+ /* Room for 8BRES. Checksum result is really 2 bytes into it */
+ csdma = csring->chan.ring_dma + (fill & (CS_RING_SIZE-1)) * 8 + 2;
+ CS_DESC(csring, fill++) = 0;
+
+ CS_DESC(csring, fill) = XCT_PTR_LEN(map_size[0]-nh_off) | XCT_PTR_ADDR(map[0]+nh_off);
+ for (i = 1; i <= nfrags; i++)
+ CS_DESC(csring, fill+i) = XCT_PTR_LEN(map_size[i]) | XCT_PTR_ADDR(map[i]);
+
+ fill += i;
+ if (fill & 1)
+ fill++;
+
+ /* Copy the result into the TCP packet */
+ cpyhdr = fill;
+ CS_DESC(csring, fill++) = XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+ XCT_FUN_LLEN(2) | XCT_FUN_SE;
+ CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(cs_dest) | XCT_PTR_T;
+ CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(csdma);
+ fill++;
+
+ evt = !csring->last_event;
+ csring->last_event = evt;
+
+ /* Event handshaking with MAC TX */
+ CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_SET | CTRL_CMD_REG(csring->events[evt]);
+ CS_DESC(csring, fill++) = 0;
+ CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_WCLR | CTRL_CMD_REG(csring->events[!evt]);
+ CS_DESC(csring, fill++) = 0;
+ csring->next_to_fill = fill & (CS_RING_SIZE-1);
+
+ cs_size = fill - hdr;
+ write_dma_reg(PAS_DMA_TXCHAN_INCR(csring->chan.chno), (cs_size) >> 1);
+
+ /* TX-side event handshaking */
+ fill = txring->next_to_fill;
+ TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_WSET | CTRL_CMD_REG(csring->events[evt]);
+ TX_DESC(txring, fill++) = 0;
+ TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_CLR | CTRL_CMD_REG(csring->events[!evt]);
+ TX_DESC(txring, fill++) = 0;
+ txring->next_to_fill = fill;
+
+ write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
+
+ return;
+}
+
static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
{
- struct pasemi_mac *mac = netdev_priv(dev);
- struct pasemi_mac_txring *txring;
- u64 dflags, mactx;
+ struct pasemi_mac * const mac = netdev_priv(dev);
+ struct pasemi_mac_txring * const txring = tx_ring(mac);
+ struct pasemi_mac_csring *csring;
+ u64 dflags = 0;
+ u64 mactx;
dma_addr_t map[MAX_SKB_FRAGS+1];
unsigned int map_size[MAX_SKB_FRAGS+1];
unsigned long flags;
int i, nfrags;
int fill;
+ const int nh_off = skb_network_offset(skb);
+ const int nh_len = skb_network_header_len(skb);
- dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
-
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const unsigned char *nh = skb_network_header(skb);
+ prefetch(&txring->ring_info);
- switch (ip_hdr(skb)->protocol) {
- case IPPROTO_TCP:
- dflags |= XCT_MACTX_CSUM_TCP;
- dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
- dflags |= XCT_MACTX_IPO(nh - skb->data);
- break;
- case IPPROTO_UDP:
- dflags |= XCT_MACTX_CSUM_UDP;
- dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
- dflags |= XCT_MACTX_IPO(nh - skb->data);
- break;
- }
- }
+ dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
nfrags = skb_shinfo(skb)->nr_frags;
@@ -1350,24 +1535,46 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
}
}
- mactx = dflags | XCT_MACTX_LLEN(skb->len);
+ if (skb->ip_summed == CHECKSUM_PARTIAL && skb->len <= 1540) {
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ dflags |= XCT_MACTX_CSUM_TCP;
+ dflags |= XCT_MACTX_IPH(nh_len >> 2);
+ dflags |= XCT_MACTX_IPO(nh_off);
+ break;
+ case IPPROTO_UDP:
+ dflags |= XCT_MACTX_CSUM_UDP;
+ dflags |= XCT_MACTX_IPH(nh_len >> 2);
+ dflags |= XCT_MACTX_IPO(nh_off);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ }
- txring = tx_ring(mac);
+ mactx = dflags | XCT_MACTX_LLEN(skb->len);
spin_lock_irqsave(&txring->lock, flags);
- fill = txring->next_to_fill;
-
/* Avoid stepping on the same cache line that the DMA controller
* is currently about to send, so leave at least 8 words available.
* Total free space needed is mactx + fragments + 8
*/
- if (RING_AVAIL(txring) < nfrags + 10) {
+ if (RING_AVAIL(txring) < nfrags + 14) {
/* no room -- stop the queue and wait for tx intr */
netif_stop_queue(dev);
goto out_err;
}
+ /* Queue up checksum + event descriptors, if needed */
+ if (mac->num_cs && skb->ip_summed == CHECKSUM_PARTIAL && skb->len > 1540) {
+ csring = mac->cs[mac->last_cs];
+ mac->last_cs = (mac->last_cs + 1) % mac->num_cs;
+
+ pasemi_mac_queue_csdesc(skb, map, map_size, txring, csring);
+ }
+
+ fill = txring->next_to_fill;
TX_DESC(txring, fill) = mactx;
TX_DESC_INFO(txring, fill).dma = nfrags;
fill++;
@@ -1441,12 +1648,33 @@ static int pasemi_mac_poll(struct napi_struct *napi, int budget)
return pkts;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void pasemi_mac_netpoll(struct net_device *dev)
+{
+ const struct pasemi_mac *mac = netdev_priv(dev);
+
+ disable_irq(mac->tx->chan.irq);
+ pasemi_mac_tx_intr(mac->tx->chan.irq, mac->tx);
+ enable_irq(mac->tx->chan.irq);
+
+ disable_irq(mac->rx->chan.irq);
+ pasemi_mac_rx_intr(mac->rx->chan.irq, mac->rx);
+ enable_irq(mac->rx->chan.irq);
+}
+#endif
+
static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- unsigned int rcmdsta;
+ unsigned int rcmdsta = 0;
int running;
+ int ret = 0;
if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
return -EINVAL;
@@ -1468,6 +1696,16 @@ static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
pasemi_mac_pause_rxint(mac);
pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
pasemi_mac_free_rx_buffers(mac);
+
+ }
+
+ /* Setup checksum channels if large MTU and none already allocated */
+ if (new_mtu > 1500 && !mac->num_cs) {
+ pasemi_mac_setup_csrings(mac);
+ if (!mac->num_cs) {
+ ret = -ENOMEM;
+ goto out;
+ }
}
/* Change maxf, i.e. what size frames are accepted.
@@ -1482,6 +1720,7 @@ static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+out:
if (running) {
write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
@@ -1494,7 +1733,7 @@ static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
pasemi_mac_intf_enable(mac);
}
- return 0;
+ return ret;
}
static int __devinit
@@ -1528,7 +1767,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG |
- NETIF_F_HIGHDMA;
+ NETIF_F_HIGHDMA | NETIF_F_GSO;
mac->lro_mgr.max_aggr = LRO_MAX_AGGR;
mac->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
@@ -1588,8 +1827,12 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->mtu = PE_DEF_MTU;
/* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = pasemi_mac_netpoll;
+#endif
dev->change_mtu = pasemi_mac_change_mtu;
+ dev->ethtool_ops = &pasemi_mac_ethtool_ops;
if (err)
goto out;
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 99e7b9329a6..1a115ec60b5 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -26,7 +26,14 @@
#include <linux/spinlock.h>
#include <linux/phy.h>
+/* Must be a power of two */
+#define RX_RING_SIZE 2048
+#define TX_RING_SIZE 4096
+#define CS_RING_SIZE (TX_RING_SIZE*2)
+
+
#define MAX_LRO_DESCRIPTORS 8
+#define MAX_CS 2
struct pasemi_mac_txring {
struct pasemi_dmachan chan; /* Must be first */
@@ -51,6 +58,15 @@ struct pasemi_mac_rxring {
struct pasemi_mac *mac; /* Needed in intr handler */
};
+struct pasemi_mac_csring {
+ struct pasemi_dmachan chan;
+ unsigned int size;
+ unsigned int next_to_fill;
+ int events[2];
+ int last_event;
+ int fun;
+};
+
struct pasemi_mac {
struct net_device *netdev;
struct pci_dev *pdev;
@@ -60,10 +76,12 @@ struct pasemi_mac {
struct napi_struct napi;
int bufsz; /* RX ring buffer size */
+ int last_cs;
+ int num_cs;
+ u32 dma_if;
u8 type;
#define MAC_TYPE_GMAC 1
#define MAC_TYPE_XAUI 2
- u32 dma_if;
u8 mac_addr[6];
@@ -74,6 +92,7 @@ struct pasemi_mac {
struct pasemi_mac_txring *tx;
struct pasemi_mac_rxring *rx;
+ struct pasemi_mac_csring *cs[MAX_CS];
char tx_irq_name[10]; /* "eth%d tx" */
char rx_irq_name[10]; /* "eth%d rx" */
int link;
@@ -90,6 +109,16 @@ struct pasemi_mac_buffer {
dma_addr_t dma;
};
+#define TX_DESC(tx, num) ((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
+#define TX_DESC_INFO(tx, num) ((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
+#define RX_DESC(rx, num) ((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
+#define RX_DESC_INFO(rx, num) ((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
+#define RX_BUFF(rx, num) ((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+#define CS_DESC(cs, num) ((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
+
+#define RING_USED(ring) (((ring)->next_to_fill - (ring)->next_to_clean) \
+ & ((ring)->size - 1))
+#define RING_AVAIL(ring) ((ring->size) - RING_USED(ring))
/* PCI register offsets and formats */
@@ -101,6 +130,7 @@ enum {
PAS_MAC_CFG_ADR0 = 0x8c,
PAS_MAC_CFG_ADR1 = 0x90,
PAS_MAC_CFG_TXP = 0x98,
+ PAS_MAC_CFG_RMON = 0x100,
PAS_MAC_IPC_CHNL = 0x208,
};
@@ -172,6 +202,8 @@ enum {
#define PAS_MAC_CFG_TXP_TIFG(x) (((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
PAS_MAC_CFG_TXP_TIFG_M)
+#define PAS_MAC_RMON(r) (0x100+(r)*4)
+
#define PAS_MAC_IPC_CHNL_DCHNO_M 0x003f0000
#define PAS_MAC_IPC_CHNL_DCHNO_S 16
#define PAS_MAC_IPC_CHNL_DCHNO(x) (((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
@@ -181,4 +213,5 @@ enum {
#define PAS_MAC_IPC_CHNL_BCH(x) (((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
PAS_MAC_IPC_CHNL_BCH_M)
+
#endif /* PASEMI_MAC_H */
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
new file mode 100644
index 00000000000..5e8df3afea6
--- /dev/null
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Ethtool hooks for the PA Semi PWRficient onchip 1G/10G Ethernet MACs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/inet_lro.h>
+
+#include <asm/pasemi_dma.h>
+#include "pasemi_mac.h"
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "rx-drops" },
+ { "rx-bytes" },
+ { "rx-packets" },
+ { "rx-broadcast-packets" },
+ { "rx-multicast-packets" },
+ { "rx-crc-errors" },
+ { "rx-undersize-errors" },
+ { "rx-oversize-errors" },
+ { "rx-short-fragment-errors" },
+ { "rx-jabber-errors" },
+ { "rx-64-byte-packets" },
+ { "rx-65-127-byte-packets" },
+ { "rx-128-255-byte-packets" },
+ { "rx-256-511-byte-packets" },
+ { "rx-512-1023-byte-packets" },
+ { "rx-1024-1518-byte-packets" },
+ { "rx-pause-frames" },
+ { "tx-bytes" },
+ { "tx-packets" },
+ { "tx-broadcast-packets" },
+ { "tx-multicast-packets" },
+ { "tx-collisions" },
+ { "tx-late-collisions" },
+ { "tx-excessive-collisions" },
+ { "tx-crc-errors" },
+ { "tx-undersize-errors" },
+ { "tx-oversize-errors" },
+ { "tx-64-byte-packets" },
+ { "tx-65-127-byte-packets" },
+ { "tx-128-255-byte-packets" },
+ { "tx-256-511-byte-packets" },
+ { "tx-512-1023-byte-packets" },
+ { "tx-1024-1518-byte-packets" },
+};
+
+static int
+pasemi_mac_ethtool_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ struct phy_device *phydev = mac->phydev;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static void
+pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct pasemi_mac *mac;
+ mac = netdev_priv(netdev);
+
+ /* clear and fill out info */
+ memset(drvinfo, 0, sizeof(struct ethtool_drvinfo));
+ strncpy(drvinfo->driver, "pasemi_mac", 12);
+ strcpy(drvinfo->version, "N/A");
+ strcpy(drvinfo->fw_version, "N/A");
+ strncpy(drvinfo->bus_info, pci_name(mac->pdev), 32);
+}
+
+static u32
+pasemi_mac_ethtool_get_msglevel(struct net_device *netdev)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ return mac->msg_enable;
+}
+
+static void
+pasemi_mac_ethtool_set_msglevel(struct net_device *netdev,
+ u32 level)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ mac->msg_enable = level;
+}
+
+
+static void
+pasemi_mac_ethtool_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ering)
+{
+ struct pasemi_mac *mac = netdev->priv;
+
+ ering->tx_max_pending = TX_RING_SIZE/2;
+ ering->tx_pending = RING_USED(mac->tx)/2;
+ ering->rx_max_pending = RX_RING_SIZE/4;
+ ering->rx_pending = RING_USED(mac->rx)/4;
+}
+
+static int pasemi_mac_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(ethtool_stats_keys);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void pasemi_mac_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct pasemi_mac *mac = netdev->priv;
+ int i;
+
+ data[0] = pasemi_read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if))
+ >> PAS_DMA_RXINT_RCMDSTA_DROPS_S;
+ for (i = 0; i < 32; i++)
+ data[1+i] = pasemi_read_mac_reg(mac->dma_if, PAS_MAC_RMON(i));
+}
+
+static void pasemi_mac_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+const struct ethtool_ops pasemi_mac_ethtool_ops = {
+ .get_settings = pasemi_mac_ethtool_get_settings,
+ .get_drvinfo = pasemi_mac_ethtool_get_drvinfo,
+ .get_msglevel = pasemi_mac_ethtool_get_msglevel,
+ .set_msglevel = pasemi_mac_ethtool_set_msglevel,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = pasemi_mac_ethtool_get_ringparam,
+ .get_strings = pasemi_mac_get_strings,
+ .get_sset_count = pasemi_mac_get_sset_count,
+ .get_ethtool_stats = pasemi_mac_get_ethtool_stats,
+};
+
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 7eb6e7e848f..e365efb3c62 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1266,6 +1266,85 @@ int gelic_net_set_rx_csum(struct net_device *netdev, u32 data)
return 0;
}
+static void gelic_net_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ if (0 <= ps3_compare_firmware_version(2, 2, 0))
+ wol->supported = WAKE_MAGIC;
+ else
+ wol->supported = 0;
+
+ wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+static int gelic_net_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ int status;
+ struct gelic_card *card;
+ u64 v1, v2;
+
+ if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
+ !capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (wol->wolopts & ~WAKE_MAGIC)
+ return -EINVAL;
+
+ card = netdev_card(netdev);
+ if (wol->wolopts & WAKE_MAGIC) {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_MAGIC_PACKET,
+ 0, GELIC_LV1_WOL_MP_ENABLE,
+ &v1, &v2);
+ if (status) {
+ pr_info("%s: enabling WOL failed %d\n", __func__,
+ status);
+ status = -EIO;
+ goto done;
+ }
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_ADD_MATCH_ADDR,
+ 0, GELIC_LV1_WOL_MATCH_ALL,
+ &v1, &v2);
+ if (!status)
+ ps3_sys_manager_set_wol(1);
+ else {
+ pr_info("%s: enabling WOL filter failed %d\n",
+ __func__, status);
+ status = -EIO;
+ }
+ } else {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_MAGIC_PACKET,
+ 0, GELIC_LV1_WOL_MP_DISABLE,
+ &v1, &v2);
+ if (status) {
+ pr_info("%s: disabling WOL failed %d\n", __func__,
+ status);
+ status = -EIO;
+ goto done;
+ }
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_DELETE_MATCH_ADDR,
+ 0, GELIC_LV1_WOL_MATCH_ALL,
+ &v1, &v2);
+ if (!status)
+ ps3_sys_manager_set_wol(0);
+ else {
+ pr_info("%s: removing WOL filter failed %d\n",
+ __func__, status);
+ status = -EIO;
+ }
+ }
+done:
+ return status;
+}
+
static struct ethtool_ops gelic_ether_ethtool_ops = {
.get_drvinfo = gelic_net_get_drvinfo,
.get_settings = gelic_ether_get_settings,
@@ -1274,6 +1353,8 @@ static struct ethtool_ops gelic_ether_ethtool_ops = {
.set_tx_csum = ethtool_op_set_tx_csum,
.get_rx_csum = gelic_net_get_rx_csum,
.set_rx_csum = gelic_net_set_rx_csum,
+ .get_wol = gelic_net_get_wol,
+ .set_wol = gelic_net_set_wol,
};
/**
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 1d39d06797e..520f143c2c0 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -182,12 +182,32 @@ enum gelic_lv1_net_control_code {
GELIC_LV1_GET_ETH_PORT_STATUS = 2,
GELIC_LV1_SET_NEGOTIATION_MODE = 3,
GELIC_LV1_GET_VLAN_ID = 4,
+ GELIC_LV1_SET_WOL = 5,
GELIC_LV1_GET_CHANNEL = 6,
GELIC_LV1_POST_WLAN_CMD = 9,
GELIC_LV1_GET_WLAN_CMD_RESULT = 10,
GELIC_LV1_GET_WLAN_EVENT = 11
};
+/* for GELIC_LV1_SET_WOL */
+enum gelic_lv1_wol_command {
+ GELIC_LV1_WOL_MAGIC_PACKET = 1,
+ GELIC_LV1_WOL_ADD_MATCH_ADDR = 6,
+ GELIC_LV1_WOL_DELETE_MATCH_ADDR = 7,
+};
+
+/* for GELIC_LV1_WOL_MAGIC_PACKET */
+enum gelic_lv1_wol_mp_arg {
+ GELIC_LV1_WOL_MP_DISABLE = 0,
+ GELIC_LV1_WOL_MP_ENABLE = 1,
+};
+
+/* for GELIC_LV1_WOL_{ADD,DELETE}_MATCH_ADDR */
+enum gelic_lv1_wol_match_arg {
+ GELIC_LV1_WOL_MATCH_INDIVIDUAL = 0,
+ GELIC_LV1_WOL_MATCH_ALL = 1,
+};
+
/* status returened from GET_ETH_PORT_STATUS */
enum gelic_lv1_ether_port_status {
GELIC_LV1_ETHER_LINK_UP = 0x0000000000000001L,
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 29a4d650e8a..2f11254bcc0 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3853,7 +3853,13 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth_vdbg("%s: IN", __FUNCTION__);
- prop = of_get_property(np, "device-id", NULL);
+ prop = of_get_property(np, "cell-index", NULL);
+ if (!prop) {
+ prop = of_get_property(np, "device-id", NULL);
+ if (!prop)
+ return -ENODEV;
+ }
+
ucc_num = *prop - 1;
if ((ucc_num < 0) || (ucc_num > 7))
return -ENODEV;
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index e4d3f330bac..2af49078100 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -203,9 +203,14 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
if ((res.start >= tempres.start) &&
(res.end <= tempres.end)) {
/* set this UCC to be the MII master */
- const u32 *id = of_get_property(tempnp, "device-id", NULL);
- if (id == NULL)
- goto bus_register_fail;
+ const u32 *id;
+
+ id = of_get_property(tempnp, "cell-index", NULL);
+ if (!id) {
+ id = of_get_property(tempnp, "device-id", NULL);
+ if (!id)
+ goto bus_register_fail;
+ }
ucc_set_qe_mux_mii_mng(*id - 1);
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index c03072b12f4..3a7a11a75fb 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,3 +1,15 @@
config OF_DEVICE
def_bool y
depends on OF && (SPARC || PPC_OF)
+
+config OF_GPIO
+ def_bool y
+ depends on OF && PPC_OF && HAVE_GPIO_LIB
+ help
+ OpenFirmware GPIO accessors
+
+config OF_I2C
+ def_tristate I2C
+ depends on PPC_OF && I2C
+ help
+ OpenFirmware I2C accessors
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index ab9be5d5255..548772e871f 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,2 +1,4 @@
obj-y = base.o
obj-$(CONFIG_OF_DEVICE) += device.o platform.o
+obj-$(CONFIG_OF_GPIO) += gpio.o
+obj-$(CONFIG_OF_I2C) += of_i2c.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 80c9deca5f3..9bd7c4a3125 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -117,6 +117,32 @@ int of_device_is_compatible(const struct device_node *device,
EXPORT_SYMBOL(of_device_is_compatible);
/**
+ * of_device_is_available - check if a device is available for use
+ *
+ * @device: Node to check for availability
+ *
+ * Returns 1 if the status property is absent or set to "okay" or "ok",
+ * 0 otherwise
+ */
+int of_device_is_available(const struct device_node *device)
+{
+ const char *status;
+ int statlen;
+
+ status = of_get_property(device, "status", &statlen);
+ if (status == NULL)
+ return 1;
+
+ if (statlen > 0) {
+ if (!strcmp(status, "okay") || !strcmp(status, "ok"))
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(of_device_is_available);
+
+/**
* of_get_parent - Get a node's parent if any
* @node: Node to get parent
*
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
new file mode 100644
index 00000000000..000681e98f2
--- /dev/null
+++ b/drivers/of/gpio.c
@@ -0,0 +1,242 @@
+/*
+ * OF helpers for the GPIO API
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <asm/prom.h>
+
+/**
+ * of_get_gpio - Get a GPIO number from the device tree to use with GPIO API
+ * @np: device node to get GPIO from
+ * @index: index of the GPIO
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * value on the error condition.
+ */
+int of_get_gpio(struct device_node *np, int index)
+{
+ int ret = -EINVAL;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gc = NULL;
+ int size;
+ const u32 *gpios;
+ u32 nr_cells;
+ int i;
+ const void *gpio_spec;
+ const u32 *gpio_cells;
+ int gpio_index = 0;
+
+ gpios = of_get_property(np, "gpios", &size);
+ if (!gpios) {
+ ret = -ENOENT;
+ goto err0;
+ }
+ nr_cells = size / sizeof(u32);
+
+ for (i = 0; i < nr_cells; gpio_index++) {
+ const phandle *gpio_phandle;
+
+ gpio_phandle = gpios + i;
+ gpio_spec = gpio_phandle + 1;
+
+ /* one cell hole in the gpios = <>; */
+ if (!*gpio_phandle) {
+ if (gpio_index == index)
+ return -ENOENT;
+ i++;
+ continue;
+ }
+
+ gc = of_find_node_by_phandle(*gpio_phandle);
+ if (!gc) {
+ pr_debug("%s: could not find phandle for gpios\n",
+ np->full_name);
+ goto err0;
+ }
+
+ of_gc = gc->data;
+ if (!of_gc) {
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ goto err1;
+ }
+
+ /* Next phandle is at phandle cells + #gpio-cells */
+ i += sizeof(*gpio_phandle) / sizeof(u32) + *gpio_cells;
+ if (i >= nr_cells + 1) {
+ pr_debug("%s: insufficient gpio-spec length\n",
+ np->full_name);
+ goto err1;
+ }
+
+ if (gpio_index == index)
+ break;
+
+ of_gc = NULL;
+ of_node_put(gc);
+ }
+
+ if (!of_gc) {
+ ret = -ENOENT;
+ goto err0;
+ }
+
+ ret = of_gc->xlate(of_gc, np, gpio_spec);
+ if (ret < 0)
+ goto err1;
+
+ ret += of_gc->gc.base;
+err1:
+ of_node_put(gc);
+err0:
+ pr_debug("%s exited with status %d\n", __func__, ret);
+ return ret;
+}
+EXPORT_SYMBOL(of_get_gpio);
+
+/**
+ * of_gpio_simple_xlate - translate gpio_spec to the GPIO number
+ * @of_gc: pointer to the of_gpio_chip structure
+ * @np: device node of the GPIO chip
+ * @gpio_spec: gpio specifier as found in the device tree
+ *
+ * This is simple translation function, suitable for the most 1:1 mapped
+ * gpio chips. This function performs only one sanity check: whether gpio
+ * is less than ngpios (that is specified in the gpio_chip).
+ */
+int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
+ const void *gpio_spec)
+{
+ const u32 *gpio = gpio_spec;
+
+ if (*gpio > of_gc->gc.ngpio)
+ return -EINVAL;
+
+ return *gpio;
+}
+EXPORT_SYMBOL(of_gpio_simple_xlate);
+
+/* Should be sufficient for now, later we'll use dynamic bases. */
+#if defined(CONFIG_PPC32) || defined(CONFIG_SPARC32)
+#define GPIOS_PER_CHIP 32
+#else
+#define GPIOS_PER_CHIP 64
+#endif
+
+static int of_get_gpiochip_base(struct device_node *np)
+{
+ struct device_node *gc = NULL;
+ int gpiochip_base = 0;
+
+ while ((gc = of_find_all_nodes(gc))) {
+ if (!of_get_property(gc, "gpio-controller", NULL))
+ continue;
+
+ if (gc != np) {
+ gpiochip_base += GPIOS_PER_CHIP;
+ continue;
+ }
+
+ of_node_put(gc);
+
+ if (gpiochip_base >= ARCH_NR_GPIOS)
+ return -ENOSPC;
+
+ return gpiochip_base;
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
+ * @np: device node of the GPIO chip
+ * @mm_gc: pointer to the of_mm_gpio_chip allocated structure
+ *
+ * To use this function you should allocate and fill mm_gc with:
+ *
+ * 1) In the gpio_chip structure:
+ * - all the callbacks
+ *
+ * 2) In the of_gpio_chip structure:
+ * - gpio_cells
+ * - xlate callback (optional)
+ *
+ * 3) In the of_mm_gpio_chip structure:
+ * - save_regs callback (optional)
+ *
+ * If succeeded, this function will map bank's memory and will
+ * do all necessary work for you. Then you'll able to use .regs
+ * to manage GPIOs from the callbacks.
+ */
+int of_mm_gpiochip_add(struct device_node *np,
+ struct of_mm_gpio_chip *mm_gc)
+{
+ int ret = -ENOMEM;
+ struct of_gpio_chip *of_gc = &mm_gc->of_gc;
+ struct gpio_chip *gc = &of_gc->gc;
+
+ gc->label = kstrdup(np->full_name, GFP_KERNEL);
+ if (!gc->label)
+ goto err0;
+
+ mm_gc->regs = of_iomap(np, 0);
+ if (!mm_gc->regs)
+ goto err1;
+
+ gc->base = of_get_gpiochip_base(np);
+ if (gc->base < 0) {
+ ret = gc->base;
+ goto err1;
+ }
+
+ if (!of_gc->xlate)
+ of_gc->xlate = of_gpio_simple_xlate;
+
+ if (mm_gc->save_regs)
+ mm_gc->save_regs(mm_gc);
+
+ np->data = of_gc;
+
+ ret = gpiochip_add(gc);
+ if (ret)
+ goto err2;
+
+ /* We don't want to lose the node and its ->data */
+ of_node_get(np);
+
+ pr_debug("%s: registered as generic GPIO chip, base is %d\n",
+ np->full_name, gc->base);
+ return 0;
+err2:
+ np->data = NULL;
+ iounmap(mm_gc->regs);
+err1:
+ kfree(gc->label);
+err0:
+ pr_err("%s: GPIO chip registration failed with status %d\n",
+ np->full_name, ret);
+ return ret;
+}
+EXPORT_SYMBOL(of_mm_gpiochip_add);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
new file mode 100644
index 00000000000..63168917115
--- /dev/null
+++ b/drivers/of/of_i2c.c
@@ -0,0 +1,115 @@
+/*
+ * OF helpers for the I2C API
+ *
+ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * Based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+struct i2c_driver_device {
+ char *of_device;
+ char *i2c_type;
+};
+
+static struct i2c_driver_device i2c_devices[] = {
+ { "dallas,ds1374", "rtc-ds1374" },
+};
+
+static int of_find_i2c_driver(struct device_node *node,
+ struct i2c_board_info *info)
+{
+ int i, cplen;
+ const char *compatible;
+ const char *p;
+
+ /* 1. search for exception list entry */
+ for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
+ if (!of_device_is_compatible(node, i2c_devices[i].of_device))
+ continue;
+ if (strlcpy(info->type, i2c_devices[i].i2c_type,
+ I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+
+ return 0;
+ }
+
+ compatible = of_get_property(node, "compatible", &cplen);
+ if (!compatible)
+ return -ENODEV;
+
+ /* 2. search for linux,<i2c-type> entry */
+ p = compatible;
+ while (cplen > 0) {
+ if (!strncmp(p, "linux,", 6)) {
+ p += 6;
+ if (strlcpy(info->type, p,
+ I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+ return 0;
+ }
+
+ i = strlen(p) + 1;
+ p += i;
+ cplen -= i;
+ }
+
+ /* 3. take fist compatible entry and strip manufacturer */
+ p = strchr(compatible, ',');
+ if (!p)
+ return -ENODEV;
+ p++;
+ if (strlcpy(info->type, p, I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+ return 0;
+}
+
+void of_register_i2c_devices(struct i2c_adapter *adap,
+ struct device_node *adap_node)
+{
+ void *result;
+ struct device_node *node;
+
+ for_each_child_of_node(adap_node, node) {
+ struct i2c_board_info info = {};
+ const u32 *addr;
+ int len;
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
+ printk(KERN_ERR
+ "of-i2c: invalid i2c device entry\n");
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ if (info.irq == NO_IRQ)
+ info.irq = -1;
+
+ if (of_find_i2c_driver(node, &info) < 0) {
+ irq_dispose_mapping(info.irq);
+ continue;
+ }
+
+ info.addr = *addr;
+
+ request_module(info.type);
+
+ result = i2c_new_device(adap, &info);
+ if (result == NULL) {
+ printk(KERN_ERR
+ "of-i2c: Failed to load driver for %s\n",
+ info.type);
+ irq_dispose_mapping(info.irq);
+ continue;
+ }
+ }
+}
+EXPORT_SYMBOL(of_register_i2c_devices);
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index d4f6f960dd1..7605453b74f 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -24,6 +24,7 @@
#include <linux/reboot.h>
#include <asm/firmware.h>
+#include <asm/lv1call.h>
#include <asm/ps3.h>
#include "vuart.h"
@@ -187,6 +188,7 @@ enum ps3_sys_manager_next_op {
* controller, and bluetooth controller.
* @PS3_SM_WAKE_RTC:
* @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
* @PS3_SM_WAKE_P_O_R: Power on reset.
*
* Additional wakeup sources when specifying PS3_SM_NEXT_OP_SYS_SHUTDOWN.
@@ -200,10 +202,19 @@ enum ps3_sys_manager_wake_source {
PS3_SM_WAKE_DEFAULT = 0,
PS3_SM_WAKE_RTC = 0x00000040,
PS3_SM_WAKE_RTC_ERROR = 0x00000080,
+ PS3_SM_WAKE_W_O_L = 0x00000400,
PS3_SM_WAKE_P_O_R = 0x80000000,
};
/**
+ * user_wake_sources - User specified wakeup sources.
+ *
+ * Logical OR of enum ps3_sys_manager_wake_source types.
+ */
+
+static u32 user_wake_sources = PS3_SM_WAKE_DEFAULT;
+
+/**
* enum ps3_sys_manager_cmd - Command from system manager to guest.
*
* The guest completes the actions needed, then acks or naks the command via
@@ -581,6 +592,23 @@ fail_id:
return -EIO;
}
+static void ps3_sys_manager_fin(struct ps3_system_bus_device *dev)
+{
+ ps3_sys_manager_send_request_shutdown(dev);
+
+ pr_emerg("System Halted, OK to turn off power\n");
+
+ while (ps3_sys_manager_handle_msg(dev)) {
+ /* pause until next DEC interrupt */
+ lv1_pause(0);
+ }
+
+ while (1) {
+ /* pause, ignoring DEC interrupt */
+ lv1_pause(1);
+ }
+}
+
/**
* ps3_sys_manager_final_power_off - The final platform machine_power_off routine.
*
@@ -601,13 +629,9 @@ static void ps3_sys_manager_final_power_off(struct ps3_system_bus_device *dev)
ps3_vuart_cancel_async(dev);
ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_SHUTDOWN,
- PS3_SM_WAKE_DEFAULT);
- ps3_sys_manager_send_request_shutdown(dev);
-
- pr_emerg("System Halted, OK to turn off power\n");
+ user_wake_sources);
- while (1)
- ps3_sys_manager_handle_msg(dev);
+ ps3_sys_manager_fin(dev);
}
/**
@@ -638,14 +662,42 @@ static void ps3_sys_manager_final_restart(struct ps3_system_bus_device *dev)
ps3_sys_manager_send_attr(dev, 0);
ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_REBOOT,
- PS3_SM_WAKE_DEFAULT);
- ps3_sys_manager_send_request_shutdown(dev);
+ user_wake_sources);
- pr_emerg("System Halted, OK to turn off power\n");
+ ps3_sys_manager_fin(dev);
+}
+
+/**
+ * ps3_sys_manager_get_wol - Get wake-on-lan setting.
+ */
+
+int ps3_sys_manager_get_wol(void)
+{
+ pr_debug("%s:%d\n", __func__, __LINE__);
+
+ return (user_wake_sources & PS3_SM_WAKE_W_O_L) != 0;
+}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_get_wol);
+
+/**
+ * ps3_sys_manager_set_wol - Set wake-on-lan setting.
+ */
+
+void ps3_sys_manager_set_wol(int state)
+{
+ static DEFINE_MUTEX(mutex);
+
+ mutex_lock(&mutex);
+
+ pr_debug("%s:%d: %d\n", __func__, __LINE__, state);
- while (1)
- ps3_sys_manager_handle_msg(dev);
+ if (state)
+ user_wake_sources |= PS3_SM_WAKE_W_O_L;
+ else
+ user_wake_sources &= ~PS3_SM_WAKE_W_O_L;
+ mutex_unlock(&mutex);
}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_set_wol);
/**
* ps3_sys_manager_work - Asynchronous read handler.
diff --git a/drivers/ps3/sys-manager-core.c b/drivers/ps3/sys-manager-core.c
index 31648f7d9ae..474225852b6 100644
--- a/drivers/ps3/sys-manager-core.c
+++ b/drivers/ps3/sys-manager-core.c
@@ -19,6 +19,7 @@
*/
#include <linux/kernel.h>
+#include <asm/lv1call.h>
#include <asm/ps3.h>
/**
@@ -50,10 +51,7 @@ void ps3_sys_manager_power_off(void)
if (ps3_sys_manager_ops.power_off)
ps3_sys_manager_ops.power_off(ps3_sys_manager_ops.dev);
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- while (1)
- (void)0;
+ ps3_sys_manager_halt();
}
void ps3_sys_manager_restart(void)
@@ -61,8 +59,14 @@ void ps3_sys_manager_restart(void)
if (ps3_sys_manager_ops.restart)
ps3_sys_manager_ops.restart(ps3_sys_manager_ops.dev);
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ ps3_sys_manager_halt();
+}
+
+void ps3_sys_manager_halt(void)
+{
+ pr_emerg("System Halted, OK to turn off power\n");
local_irq_disable();
while (1)
- (void)0;
+ lv1_pause(1);
}
+
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 32b9737759c..0cc39f82d7c 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -92,6 +92,9 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR];
/* these are located in their respective files */
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+ struct device_node *np);
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
int cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 236af9d3385..a638ba0679a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -966,24 +966,23 @@ static int cpm_uart_init_port(struct device_node *np,
if (!mem)
return -ENOMEM;
- pram = of_iomap(np, 1);
- if (!pram) {
- ret = -ENOMEM;
- goto out_mem;
- }
-
if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") ||
of_device_is_compatible(np, "fsl,cpm2-scc-uart")) {
pinfo->sccp = mem;
- pinfo->sccup = pram;
+ pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np);
} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
pinfo->flags |= FLAG_SMC;
pinfo->smcp = mem;
- pinfo->smcup = pram;
+ pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np);
} else {
ret = -ENODEV;
- goto out_pram;
+ goto out_mem;
+ }
+
+ if (!pram) {
+ ret = -ENOMEM;
+ goto out_mem;
}
pinfo->tx_nrfifos = TX_NUM_FIFO;
@@ -1007,7 +1006,7 @@ static int cpm_uart_init_port(struct device_node *np,
return cpm_uart_request_port(&pinfo->port);
out_pram:
- iounmap(pram);
+ cpm_uart_unmap_pram(pinfo, pram);
out_mem:
iounmap(mem);
return ret;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 6ea0366e26a..74f1432bb24 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -45,6 +45,8 @@
#include <linux/serial_core.h>
#include <linux/kernel.h>
+#include <linux/of.h>
+
#include "cpm_uart.h"
/**************************************************************/
@@ -54,6 +56,18 @@ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
cpm_command(port->command, cmd);
}
+
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+ struct device_node *np)
+{
+ return of_iomap(np, 1);
+}
+
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
+{
+ iounmap(pram);
+}
+
#else
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index d9af06a791b..bb862e2f54c 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -41,6 +41,9 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/fs_pd.h>
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#include <asm/prom.h>
+#endif
#include <linux/serial_core.h>
#include <linux/kernel.h>
@@ -54,6 +57,55 @@ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
cpm_command(port->command, cmd);
}
+
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+ struct device_node *np)
+{
+ void __iomem *pram;
+ unsigned long offset;
+ struct resource res;
+ unsigned long len;
+
+ /* Don't remap parameter RAM if it has already been initialized
+ * during console setup.
+ */
+ if (IS_SMC(port) && port->smcup)
+ return port->smcup;
+ else if (!IS_SMC(port) && port->sccup)
+ return port->sccup;
+
+ if (of_address_to_resource(np, 1, &res))
+ return NULL;
+
+ len = 1 + res.end - res.start;
+ pram = ioremap(res.start, len);
+ if (!pram)
+ return NULL;
+
+ if (!IS_SMC(port))
+ return pram;
+
+ if (len != 2) {
+ printk(KERN_WARNING "cpm_uart[%d]: device tree references "
+ "SMC pram, using boot loader/wrapper pram mapping. "
+ "Please fix your device tree to reference the pram "
+ "base register instead.\n",
+ port->port.line);
+ return pram;
+ }
+
+ offset = cpm_dpalloc(PROFF_SMC_SIZE, 64);
+ out_be16(pram, offset);
+ iounmap(pram);
+ return cpm_muram_addr(offset);
+}
+
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
+{
+ if (!IS_SMC(port))
+ iounmap(pram);
+}
+
#else
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index c0e50a46105..8aacfb78dea 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -56,7 +56,9 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev,
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT;
port->dev = &ofdev->dev;
- port->custom_divisor = *clk / (16 * (*spd));
+ /* If current-speed was set, then try not to change it. */
+ if (spd)
+ port->custom_divisor = *clk / (16 * (*spd));
return 0;
}
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index e0994f06100..5e4310ccd59 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1270,10 +1270,18 @@ static int ucc_uart_probe(struct of_device *ofdev,
/* Get the UCC number (device ID) */
/* UCCs are numbered 1-7 */
- iprop = of_get_property(np, "device-id", NULL);
- if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
- dev_err(&ofdev->dev,
- "missing or invalid UCC specified in device tree\n");
+ iprop = of_get_property(np, "cell-index", NULL);
+ if (!iprop) {
+ iprop = of_get_property(np, "device-id", NULL);
+ if (!iprop) {
+ dev_err(&ofdev->dev, "UCC is unspecified in "
+ "device tree\n");
+ return -EINVAL;
+ }
+ }
+
+ if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
+ dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop);
kfree(qe_port);
return -ENODEV;
}
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 5f640e54247..7381916dfcb 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -1,5 +1,6 @@
include include/asm-generic/Kbuild.asm
+header-y += a.out.h
header-y += auxvec.h
header-y += ioctls.h
header-y += mman.h
@@ -23,7 +24,6 @@ header-y += sigcontext.h
header-y += statfs.h
header-y += ps3fb.h
-unifdef-y += a.out.h
unifdef-y += asm-compat.h
unifdef-y += bootx.h
unifdef-y += byteorder.h
diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h
index 4aa220718b1..98324c5a828 100644
--- a/include/asm-powerpc/abs_addr.h
+++ b/include/asm-powerpc/abs_addr.h
@@ -12,10 +12,11 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lmb.h>
+
#include <asm/types.h>
#include <asm/page.h>
#include <asm/prom.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
struct mschunks_map {
diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h
index 220d9a781ab..a99a7492947 100644
--- a/include/asm-powerpc/bitops.h
+++ b/include/asm-powerpc/bitops.h
@@ -312,24 +312,26 @@ static __inline__ int fls(unsigned int x)
asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
return 32 - lz;
}
+
+/*
+ * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
+ * instruction; for 32-bit we use the generic version, which does two
+ * 32-bit fls calls.
+ */
+#ifdef __powerpc64__
+static __inline__ int fls64(__u64 x)
+{
+ int lz;
+
+ asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
+ return 64 - lz;
+}
+#else
#include <asm-generic/bitops/fls64.h>
+#endif /* __powerpc64__ */
#include <asm-generic/bitops/hweight.h>
-
-#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
-unsigned long find_next_zero_bit(const unsigned long *addr,
- unsigned long size, unsigned long offset);
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
-unsigned long find_next_bit(const unsigned long *addr,
- unsigned long size, unsigned long offset);
+#include <asm-generic/bitops/find.h>
/* Little-endian versions */
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 77e39dad972..ede38ffe466 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -4,6 +4,20 @@
#include <linux/compiler.h>
#include <linux/types.h>
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+#define CPM_CR_SET_TIMER ((ushort)0x0008)
+#define CPM_CR_STOP_IDMA ((ushort)0x000b)
+
/* Buffer descriptors used by many of the CPM protocols. */
typedef struct cpm_buf_desc {
ushort cbd_sc; /* Status and Control */
diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
index b2ebd6ac6da..3df43967800 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/include/asm-powerpc/cpm1.h
@@ -28,19 +28,6 @@
#define CPM_CR_CHAN ((ushort)0x00f0)
#define CPM_CR_FLG ((ushort)0x0001)
-/* Some commands (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR
-
/* Channel numbers.
*/
#define CPM_CR_CH_SCC1 ((ushort)0x0000)
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index b93a53eb55c..4c85ed9cd43 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -71,18 +71,9 @@
#define CPM_CR_FCC_PAGE(x) (x + 0x04)
-/* Some opcodes (there are more...later)
+/* CPM2-specific opcodes (see cpm.h for common opcodes)
*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
#define CPM_CR_START_IDMA ((ushort)0x0009)
-#define CPM_CR_STOP_IDMA ((ushort)0x000b)
#define mk_cr_cmd(PG, SBC, MCN, OP) \
((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h
index 8485c28b5f4..fb11b0c459b 100644
--- a/include/asm-powerpc/cputhreads.h
+++ b/include/asm-powerpc/cputhreads.h
@@ -35,7 +35,7 @@ static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
res = CPU_MASK_NONE;
for (i = 0; i < NR_CPUS; i += threads_per_core) {
- cpus_shift_right(tmp, threads_core_mask, i);
+ cpus_shift_left(tmp, threads_core_mask, i);
if (cpus_intersects(threads, tmp))
cpu_set(i, res);
}
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index be6c879e876..f8398ce8037 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -82,6 +82,19 @@ static inline void __mtdcri(int base_addr, int base_data, int reg,
spin_unlock_irqrestore(&dcr_ind_lock, flags);
}
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+ unsigned clr, unsigned set)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&dcr_ind_lock, flags);
+ __mtdcr(base_addr, reg);
+ val = (__mfdcr(base_data) & ~clr) | set;
+ __mtdcr(base_data, val);
+ spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \
DCRN_ ## base ## _CONFIG_DATA, \
reg)
@@ -90,6 +103,10 @@ static inline void __mtdcri(int base_addr, int base_data, int reg,
DCRN_ ## base ## _CONFIG_DATA, \
reg, data)
+#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \
+ DCRN_ ## base ## _CONFIG_DATA, \
+ reg, clr, set)
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h
index 9f1fb98fcdc..29b0ecef980 100644
--- a/include/asm-powerpc/dcr-regs.h
+++ b/include/asm-powerpc/dcr-regs.h
@@ -68,4 +68,82 @@
#define SDR0_UART3 0x0123
#define SDR0_CUST0 0x4000
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR 0x00
+#define DCRN_SRAM0_SB1CR 0x01
+#define DCRN_SRAM0_SB2CR 0x02
+#define DCRN_SRAM0_SB3CR 0x03
+#define SRAM_SBCR_BU_MASK 0x00000180
+#define SRAM_SBCR_BS_64KB 0x00000800
+#define SRAM_SBCR_BU_RO 0x00000080
+#define SRAM_SBCR_BU_RW 0x00000180
+#define DCRN_SRAM0_BEAR 0x04
+#define DCRN_SRAM0_BESR0 0x05
+#define DCRN_SRAM0_BESR1 0x06
+#define DCRN_SRAM0_PMEG 0x07
+#define DCRN_SRAM0_CID 0x08
+#define DCRN_SRAM0_REVID 0x09
+#define DCRN_SRAM0_DPC 0x0a
+#define SRAM_DPC_ENABLE 0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG 0x00
+#define L2C_CFG_L2M 0x80000000
+#define L2C_CFG_ICU 0x40000000
+#define L2C_CFG_DCU 0x20000000
+#define L2C_CFG_DCW_MASK 0x1e000000
+#define L2C_CFG_TPC 0x01000000
+#define L2C_CFG_CPC 0x00800000
+#define L2C_CFG_FRAN 0x00200000
+#define L2C_CFG_SS_MASK 0x00180000
+#define L2C_CFG_SS_256 0x00000000
+#define L2C_CFG_CPIM 0x00040000
+#define L2C_CFG_TPIM 0x00020000
+#define L2C_CFG_LIM 0x00010000
+#define L2C_CFG_PMUX_MASK 0x00007000
+#define L2C_CFG_PMUX_SNP 0x00000000
+#define L2C_CFG_PMUX_IF 0x00001000
+#define L2C_CFG_PMUX_DF 0x00002000
+#define L2C_CFG_PMUX_DS 0x00003000
+#define L2C_CFG_PMIM 0x00000800
+#define L2C_CFG_TPEI 0x00000400
+#define L2C_CFG_CPEI 0x00000200
+#define L2C_CFG_NAM 0x00000100
+#define L2C_CFG_SMCM 0x00000080
+#define L2C_CFG_NBRM 0x00000040
+#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */
+#define DCRN_L2C0_CMD 0x01
+#define L2C_CMD_CLR 0x80000000
+#define L2C_CMD_DIAG 0x40000000
+#define L2C_CMD_INV 0x20000000
+#define L2C_CMD_CCP 0x10000000
+#define L2C_CMD_CTE 0x08000000
+#define L2C_CMD_STRC 0x04000000
+#define L2C_CMD_STPC 0x02000000
+#define L2C_CMD_RPMC 0x01000000
+#define L2C_CMD_HCC 0x00800000
+#define DCRN_L2C0_ADDR 0x02
+#define DCRN_L2C0_DATA 0x03
+#define DCRN_L2C0_SR 0x04
+#define L2C_SR_CC 0x80000000
+#define L2C_SR_CPE 0x40000000
+#define L2C_SR_TPE 0x20000000
+#define L2C_SR_LRU 0x10000000
+#define L2C_SR_PCS 0x08000000
+#define DCRN_L2C0_REVID 0x05
+#define DCRN_L2C0_SNP0 0x06
+#define DCRN_L2C0_SNP1 0x07
+#define L2C_SNP_BA_MASK 0xffff0000
+#define L2C_SNP_SSR_MASK 0x0000f000
+#define L2C_SNP_SSR_32G 0x0000f000
+#define L2C_SNP_ESR 0x00000800
+
#endif /* __DCR_REGS_H__ */
diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h
index 39abdb02fde..329148b5acc 100644
--- a/include/asm-powerpc/exception.h
+++ b/include/asm-powerpc/exception.h
@@ -228,18 +228,18 @@ label##_pSeries: \
BEGIN_FW_FTR_SECTION; \
stb r11,PACAHARDIRQEN(r13); \
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
+ TRACE_DISABLE_INTS; \
BEGIN_FW_FTR_SECTION; \
mfmsr r10; \
ori r10,r10,MSR_EE; \
mtmsrd r10,1; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
#else
#define DISABLE_INTS \
li r11,0; \
stb r11,PACASOFTIRQEN(r13); \
- stb r11,PACAHARDIRQEN(r13)
-
+ stb r11,PACAHARDIRQEN(r13); \
+ TRACE_DISABLE_INTS
#endif /* CONFIG_PPC_ISERIES */
#define ENABLE_INTS \
diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h
new file mode 100644
index 00000000000..303f5484c05
--- /dev/null
+++ b/include/asm-powerpc/fsl_lbc.h
@@ -0,0 +1,311 @@
+/* Freescale Local Bus Controller
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ * Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_FSL_LBC_H
+#define __ASM_FSL_LBC_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct fsl_lbc_bank {
+ __be32 br; /**< Base Register */
+#define BR_BA 0xFFFF8000
+#define BR_BA_SHIFT 15
+#define BR_PS 0x00001800
+#define BR_PS_SHIFT 11
+#define BR_PS_8 0x00000800 /* Port Size 8 bit */
+#define BR_PS_16 0x00001000 /* Port Size 16 bit */
+#define BR_PS_32 0x00001800 /* Port Size 32 bit */
+#define BR_DECC 0x00000600
+#define BR_DECC_SHIFT 9
+#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */
+#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */
+#define BR_WP 0x00000100
+#define BR_WP_SHIFT 8
+#define BR_MSEL 0x000000E0
+#define BR_MSEL_SHIFT 5
+#define BR_MS_GPCM 0x00000000 /* GPCM */
+#define BR_MS_FCM 0x00000020 /* FCM */
+#define BR_MS_SDRAM 0x00000060 /* SDRAM */
+#define BR_MS_UPMA 0x00000080 /* UPMA */
+#define BR_MS_UPMB 0x000000A0 /* UPMB */
+#define BR_MS_UPMC 0x000000C0 /* UPMC */
+#define BR_V 0x00000001
+#define BR_V_SHIFT 0
+#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+ __be32 or; /**< Base Register */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM 0xFFFF8000
+#define OR_FCM_AM_SHIFT 15
+#define OR_FCM_BCTLD 0x00001000
+#define OR_FCM_BCTLD_SHIFT 12
+#define OR_FCM_PGS 0x00000400
+#define OR_FCM_PGS_SHIFT 10
+#define OR_FCM_CSCT 0x00000200
+#define OR_FCM_CSCT_SHIFT 9
+#define OR_FCM_CST 0x00000100
+#define OR_FCM_CST_SHIFT 8
+#define OR_FCM_CHT 0x00000080
+#define OR_FCM_CHT_SHIFT 7
+#define OR_FCM_SCY 0x00000070
+#define OR_FCM_SCY_SHIFT 4
+#define OR_FCM_SCY_1 0x00000010
+#define OR_FCM_SCY_2 0x00000020
+#define OR_FCM_SCY_3 0x00000030
+#define OR_FCM_SCY_4 0x00000040
+#define OR_FCM_SCY_5 0x00000050
+#define OR_FCM_SCY_6 0x00000060
+#define OR_FCM_SCY_7 0x00000070
+#define OR_FCM_RST 0x00000008
+#define OR_FCM_RST_SHIFT 3
+#define OR_FCM_TRLX 0x00000004
+#define OR_FCM_TRLX_SHIFT 2
+#define OR_FCM_EHTR 0x00000002
+#define OR_FCM_EHTR_SHIFT 1
+};
+
+struct fsl_lbc_regs {
+ struct fsl_lbc_bank bank[8];
+ u8 res0[0x28];
+ __be32 mar; /**< UPM Address Register */
+ u8 res1[0x4];
+ __be32 mamr; /**< UPMA Mode Register */
+#define MxMR_OP_NO (0 << 28) /**< normal operation */
+#define MxMR_OP_WA (1 << 28) /**< write array */
+#define MxMR_OP_RA (2 << 28) /**< read array */
+#define MxMR_OP_RP (3 << 28) /**< run pattern */
+#define MxMR_MAD 0x3f /**< machine address */
+ __be32 mbmr; /**< UPMB Mode Register */
+ __be32 mcmr; /**< UPMC Mode Register */
+ u8 res2[0x8];
+ __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
+ __be32 mdr; /**< UPM Data Register */
+ u8 res3[0x4];
+ __be32 lsor; /**< Special Operation Initiation Register */
+ __be32 lsdmr; /**< SDRAM Mode Register */
+ u8 res4[0x8];
+ __be32 lurt; /**< UPM Refresh Timer */
+ __be32 lsrt; /**< SDRAM Refresh Timer */
+ u8 res5[0x8];
+ __be32 ltesr; /**< Transfer Error Status Register */
+#define LTESR_BM 0x80000000
+#define LTESR_FCT 0x40000000
+#define LTESR_PAR 0x20000000
+#define LTESR_WP 0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS 0x00080000
+#define LTESR_CC 0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+ __be32 ltedr; /**< Transfer Error Disable Register */
+ __be32 lteir; /**< Transfer Error Interrupt Register */
+ __be32 lteatr; /**< Transfer Error Attributes Register */
+ __be32 ltear; /**< Transfer Error Address Register */
+ u8 res6[0xC];
+ __be32 lbcr; /**< Configuration Register */
+#define LBCR_LDIS 0x80000000
+#define LBCR_LDIS_SHIFT 31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT 22
+#define LBCR_AHD 0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT 17
+#define LBCR_EPAR 0x00010000
+#define LBCR_EPAR_SHIFT 16
+#define LBCR_BMT 0x0000FF00
+#define LBCR_BMT_SHIFT 8
+#define LBCR_INIT 0x00040000
+ __be32 lcrr; /**< Clock Ratio Register */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_CLKDIV 0x0000000F
+#define LCRR_CLKDIV_SHIFT 0
+ u8 res7[0x8];
+ __be32 fmr; /**< Flash Mode Register */
+#define FMR_CWTO 0x0000F000
+#define FMR_CWTO_SHIFT 12
+#define FMR_BOOT 0x00000800
+#define FMR_ECCM 0x00000100
+#define FMR_AL 0x00000030
+#define FMR_AL_SHIFT 4
+#define FMR_OP 0x00000003
+#define FMR_OP_SHIFT 0
+ __be32 fir; /**< Flash Instruction Register */
+#define FIR_OP0 0xF0000000
+#define FIR_OP0_SHIFT 28
+#define FIR_OP1 0x0F000000
+#define FIR_OP1_SHIFT 24
+#define FIR_OP2 0x00F00000
+#define FIR_OP2_SHIFT 20
+#define FIR_OP3 0x000F0000
+#define FIR_OP3_SHIFT 16
+#define FIR_OP4 0x0000F000
+#define FIR_OP4_SHIFT 12
+#define FIR_OP5 0x00000F00
+#define FIR_OP5_SHIFT 8
+#define FIR_OP6 0x000000F0
+#define FIR_OP6_SHIFT 4
+#define FIR_OP7 0x0000000F
+#define FIR_OP7_SHIFT 0
+#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
+#define FIR_OP_CA 0x1 /* Issue current column address */
+#define FIR_OP_PA 0x2 /* Issue current block+page address */
+#define FIR_OP_UA 0x3 /* Issue user defined address */
+#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
+#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */
+ __be32 fcr; /**< Flash Command Register */
+#define FCR_CMD0 0xFF000000
+#define FCR_CMD0_SHIFT 24
+#define FCR_CMD1 0x00FF0000
+#define FCR_CMD1_SHIFT 16
+#define FCR_CMD2 0x0000FF00
+#define FCR_CMD2_SHIFT 8
+#define FCR_CMD3 0x000000FF
+#define FCR_CMD3_SHIFT 0
+ __be32 fbar; /**< Flash Block Address Register */
+#define FBAR_BLK 0x00FFFFFF
+ __be32 fpar; /**< Flash Page Address Register */
+#define FPAR_SP_PI 0x00007C00
+#define FPAR_SP_PI_SHIFT 10
+#define FPAR_SP_MS 0x00000200
+#define FPAR_SP_CI 0x000001FF
+#define FPAR_SP_CI_SHIFT 0
+#define FPAR_LP_PI 0x0003F000
+#define FPAR_LP_PI_SHIFT 12
+#define FPAR_LP_MS 0x00000800
+#define FPAR_LP_CI 0x000007FF
+#define FPAR_LP_CI_SHIFT 0
+ __be32 fbcr; /**< Flash Byte Count Register */
+#define FBCR_BC 0x00000FFF
+ u8 res11[0x8];
+ u8 res8[0xF00];
+};
+
+extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+extern spinlock_t fsl_lbc_lock;
+
+/*
+ * FSL UPM routines
+ */
+struct fsl_upm {
+ __be32 __iomem *mxmr;
+ int width;
+};
+
+extern int fsl_lbc_find(phys_addr_t addr_base);
+extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
+
+/**
+ * fsl_upm_start_pattern - start UPM patterns execution
+ * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @pat_offset: UPM pattern offset for the command to be executed
+ *
+ * This routine programmes UPM so the next memory access that hits an UPM
+ * will trigger pattern execution, starting at pat_offset.
+ */
+static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
+{
+ clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
+}
+
+/**
+ * fsl_upm_end_pattern - end UPM patterns execution
+ * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
+ *
+ * This routine reverts UPM to normal operation mode.
+ */
+static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+ clrbits32(upm->mxmr, MxMR_OP_RP);
+
+ while (in_be32(upm->mxmr) & MxMR_OP_RP)
+ cpu_relax();
+}
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base: remapped pointer to where memory access should happen
+ * @mar: MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
+ void __iomem *io_base, u32 mar)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+ out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+ switch (upm->width) {
+ case 8:
+ out_8(io_base, 0x0);
+ break;
+ case 16:
+ out_be16(io_base, 0x0);
+ break;
+ case 32:
+ out_be32(io_base, 0x0);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+ return ret;
+}
+
+#endif /* __ASM_FSL_LBC_H */
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
new file mode 100644
index 00000000000..77ad3a890f3
--- /dev/null
+++ b/include/asm-powerpc/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_HAVE_GPIO_LIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_HAVE_GPIO_LIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h
index a7b60bf639e..ad8c9f7fd0e 100644
--- a/include/asm-powerpc/hw_irq.h
+++ b/include/asm-powerpc/hw_irq.h
@@ -27,7 +27,7 @@ static inline unsigned long local_get_flags(void)
return flags;
}
-static inline unsigned long local_irq_disable(void)
+static inline unsigned long raw_local_irq_disable(void)
{
unsigned long flags, zero;
@@ -39,14 +39,15 @@ static inline unsigned long local_irq_disable(void)
return flags;
}
-extern void local_irq_restore(unsigned long);
+extern void raw_local_irq_restore(unsigned long);
extern void iseries_handle_interrupts(void);
-#define local_irq_enable() local_irq_restore(1)
-#define local_save_flags(flags) ((flags) = local_get_flags())
-#define local_irq_save(flags) ((flags) = local_irq_disable())
+#define raw_local_irq_enable() raw_local_irq_restore(1)
+#define raw_local_save_flags(flags) ((flags) = local_get_flags())
+#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable())
-#define irqs_disabled() (local_get_flags() == 0)
+#define raw_irqs_disabled() (local_get_flags() == 0)
+#define raw_irqs_disabled_flags(flags) ((flags) == 0)
#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
index 82a45261509..7b6f411db3e 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/include/asm-powerpc/immap_qe.h
@@ -20,6 +20,7 @@
#ifdef __KERNEL__
#include <linux/kernel.h>
+#include <asm/io.h>
#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
@@ -468,7 +469,7 @@ struct qe_immap {
u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
} __attribute__ ((packed));
-extern struct qe_immap *qe_immr;
+extern struct qe_immap __iomem *qe_immr;
extern phys_addr_t get_qe_base(void);
static inline unsigned long immrbar_virt_to_phys(void *address)
diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h
index 7970cbaeaa5..cc6fdba3366 100644
--- a/include/asm-powerpc/irqflags.h
+++ b/include/asm-powerpc/irqflags.h
@@ -2,30 +2,43 @@
* include/asm-powerpc/irqflags.h
*
* IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() macros from the lowlevel headers.
*/
#ifndef _ASM_IRQFLAGS_H
#define _ASM_IRQFLAGS_H
+#ifndef __ASSEMBLY__
/*
* Get definitions for raw_local_save_flags(x), etc.
*/
#include <asm-powerpc/hw_irq.h>
+#else
+#ifdef CONFIG_TRACE_IRQFLAGS
/*
- * Do the CPU's IRQ-state tracing from assembly code. We call a
- * C function, so save all the C-clobbered registers:
+ * Most of the CPU's IRQ-state tracing is done from assembly code; we
+ * have to call a C function so call a wrapper that saves all the
+ * C-clobbered registers.
*/
-#ifdef CONFIG_TRACE_IRQFLAGS
-
-#error No support on PowerPC yet for CONFIG_TRACE_IRQFLAGS
-
+#define TRACE_ENABLE_INTS bl .trace_hardirqs_on
+#define TRACE_DISABLE_INTS bl .trace_hardirqs_off
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \
+ cmpdi en, 0; \
+ bne 95f; \
+ stb en,PACASOFTIRQEN(r13); \
+ bl .trace_hardirqs_off; \
+ b skip; \
+95: bl .trace_hardirqs_on; \
+ li en,1;
+#define TRACE_AND_RESTORE_IRQ(en) \
+ TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \
+96: stb en,PACASOFTIRQEN(r13)
#else
-# define TRACE_IRQS_ON
-# define TRACE_IRQS_OFF
+#define TRACE_ENABLE_INTS
+#define TRACE_DISABLE_INTS
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
+#define TRACE_AND_RESTORE_IRQ(en) \
+ stb en,PACASOFTIRQEN(r13)
+#endif
#endif
#endif
diff --git a/include/asm-powerpc/iseries/alpaca.h b/include/asm-powerpc/iseries/alpaca.h
new file mode 100644
index 00000000000..c0cce6727a6
--- /dev/null
+++ b/include/asm-powerpc/iseries/alpaca.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright © 2008 Stephen Rothwell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
+#define _ASM_POWERPC_ISERIES_ALPACA_H
+
+/*
+ * This is the part of the paca that the iSeries hypervisor
+ * needs to be statically initialised. Immediately after boot
+ * we switch to the normal Linux paca.
+ */
+struct alpaca {
+ struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
+ const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+};
+
+#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
diff --git a/include/asm-powerpc/iseries/it_lp_reg_save.h b/include/asm-powerpc/iseries/it_lp_reg_save.h
deleted file mode 100644
index 5403b756f65..00000000000
--- a/include/asm-powerpc/iseries/it_lp_reg_save.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2001 Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
-#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
-
-/*
- * This control block contains the data that is shared between PLIC
- * and the OS
- */
-
-struct ItLpRegSave {
- u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
- u16 xSize; // Size of this class 004-005
- u8 xInUse; // Area is live 006-007
- u8 xRsvd1[9]; // Reserved 007-00F
-
- u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
- u32 xCTRL; // Control Register 170-173
- u32 xDEC; // Decrementer 174-177
- u32 xFPSCR; // FP Status and Control Reg 178-17B
- u32 xPVR; // Processor Version Number 17C-17F
-
- u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
- u32 xPMC1; // Perf Monitor Counter 1 188-18B
- u32 xPMC2; // Perf Monitor Counter 2 18C-18F
- u32 xPMC3; // Perf Monitor Counter 3 190-193
- u32 xPMC4; // Perf Monitor Counter 4 194-197
- u32 xPIR; // Processor ID Reg 198-19B
-
- u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
- u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
- u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
- u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
- u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
- u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
- u32 xTSC; // Thread Switch Control 1B4-1B7
- u32 xTST; // Thread Switch Timeout 1B8-1BB
- u32 xRsvd; // Reserved 1BC-1BF
-
- u64 xACCR; // Address Compare Control Reg 1C0-1C7
- u64 xIMR; // Instruction Match Register 1C8-1CF
- u64 xSDR1; // Storage Description Reg 1 1D0-1D7
- u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
- u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
- u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
- u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
- u64 xTB; // Time Base Register 1F8-1FF
-
- u64 xFPR[32]; // Floating Point Registers 200-2FF
-
- u64 xMSR; // Machine State Register 300-307
- u64 xNIA; // Next Instruction Address 308-30F
-
- u64 xDABR; // Data Address Breakpoint Reg 310-317
- u64 xIABR; // Inst Address Breakpoint Reg 318-31F
-
- u64 xHID0; // HW Implementation Dependent0 320-327
-
- u64 xHID4; // HW Implementation Dependent4 328-32F
- u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
- u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
- u64 xSDAR; // Sample Data Address Register 340-347
- u64 xSIAR; // Sample Inst Address Register 348-34F
-
- u8 xRsvd3[176]; // Reserved 350-3FF
-};
-
-extern struct ItLpRegSave iseries_reg_save[];
-
-#endif /* _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
index 5d1dc48a0bb..6f5fdf0a19a 100644
--- a/include/asm-powerpc/lmb.h
+++ b/include/asm-powerpc/lmb.h
@@ -1,81 +1,15 @@
#ifndef _ASM_POWERPC_LMB_H
#define _ASM_POWERPC_LMB_H
-#ifdef __KERNEL__
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
+#include <asm/udbg.h>
-#include <linux/init.h>
-#include <asm/prom.h>
+#define LMB_DBG(fmt...) udbg_printf(fmt)
-#define MAX_LMB_REGIONS 128
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define LMB_REAL_LIMIT lowmem_end_addr
+#else
+#define LMB_REAL_LIMIT 0
+#endif
-struct lmb_property {
- unsigned long base;
- unsigned long size;
-};
-
-struct lmb_region {
- unsigned long cnt;
- unsigned long size;
- struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
- unsigned long debug;
- unsigned long rmo_size;
- struct lmb_region memory;
- struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long __init lmb_add(unsigned long base, unsigned long size);
-extern long __init lmb_reserve(unsigned long base, unsigned long size);
-extern unsigned long __init lmb_alloc(unsigned long size, unsigned long align);
-extern unsigned long __init lmb_alloc_base(unsigned long size,
- unsigned long align, unsigned long max_addr);
-extern unsigned long __init __lmb_alloc_base(unsigned long size,
- unsigned long align, unsigned long max_addr);
-extern unsigned long __init lmb_phys_mem_size(void);
-extern unsigned long __init lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(unsigned long memory_limit);
-extern int __init lmb_is_reserved(unsigned long addr);
-
-extern void lmb_dump_all(void);
-
-static inline unsigned long
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].size;
-}
-static inline unsigned long
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_start_pfn(type, region_nr) +
- lmb_size_pages(type, region_nr);
-}
-
-#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_LMB_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 0872ec228c1..54ed64df95b 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -68,6 +68,8 @@ struct machdep_calls {
unsigned long vflags,
int psize, int ssize);
long (*hpte_remove)(unsigned long hpte_group);
+ void (*hpte_removebolted)(unsigned long ea,
+ int psize, int ssize);
void (*flush_hash_range)(unsigned long number, int local);
/* special for kexec, to be called in real mode, linar mapping is
@@ -196,9 +198,6 @@ struct machdep_calls {
May be NULL. */
void (*init)(void);
- void (*setup_io_mappings)(void);
-
- void (*early_serial_map)(void);
void (*kgdb_map_scc)(void);
/*
diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h
index 3a6cb1a513b..079c06eae44 100644
--- a/include/asm-powerpc/macio.h
+++ b/include/asm-powerpc/macio.h
@@ -2,7 +2,7 @@
#define __MACIO_ASIC_H__
#ifdef __KERNEL__
-#include <asm/of_device.h>
+#include <linux/of_device.h>
extern struct bus_type macio_bus_type;
diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h
index 7d37f77043a..3d108676584 100644
--- a/include/asm-powerpc/mmu-40x.h
+++ b/include/asm-powerpc/mmu-40x.h
@@ -53,8 +53,6 @@
#ifndef __ASSEMBLY__
-typedef unsigned long phys_addr_t;
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h
index 62772ae839c..c8b02d97f75 100644
--- a/include/asm-powerpc/mmu-44x.h
+++ b/include/asm-powerpc/mmu-44x.h
@@ -53,8 +53,6 @@
#ifndef __ASSEMBLY__
-typedef unsigned long long phys_addr_t;
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
diff --git a/include/asm-powerpc/mmu-8xx.h b/include/asm-powerpc/mmu-8xx.h
index 952bd8899f2..9db877eb88d 100644
--- a/include/asm-powerpc/mmu-8xx.h
+++ b/include/asm-powerpc/mmu-8xx.h
@@ -136,8 +136,6 @@
#define SPRN_M_TW 799
#ifndef __ASSEMBLY__
-typedef unsigned long phys_addr_t;
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/include/asm-powerpc/mmu-fsl-booke.h
index 37580004cd7..925d93cf64d 100644
--- a/include/asm-powerpc/mmu-fsl-booke.h
+++ b/include/asm-powerpc/mmu-fsl-booke.h
@@ -73,12 +73,6 @@
#ifndef __ASSEMBLY__
-#ifndef CONFIG_PHYS_64BIT
-typedef unsigned long phys_addr_t;
-#else
-typedef unsigned long long phys_addr_t;
-#endif
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h
index 4bd735be383..6e21ca618ec 100644
--- a/include/asm-powerpc/mmu-hash32.h
+++ b/include/asm-powerpc/mmu-hash32.h
@@ -84,8 +84,6 @@ typedef struct {
unsigned long vdso_base;
} mm_context_t;
-typedef unsigned long phys_addr_t;
-
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index 2864fa3989e..0dff7677604 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -469,9 +469,6 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
VSID_MODULUS_256M)
#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea))
-/* Physical address used by some IO functions */
-typedef unsigned long phys_addr_t;
-
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
index 748b35ab37b..eb61b9c1edf 100644
--- a/include/asm-powerpc/paca.h
+++ b/include/asm-powerpc/paca.h
@@ -42,10 +42,7 @@ struct task_struct;
* Defines the layout of the paca.
*
* This structure is not directly accessed by firmware or the service
- * processor except for the first two pointers that point to the
- * lppaca area and the ItLpRegSave area for this CPU. The lppaca
- * object is currently contained within the PACA but it doesn't need
- * to be.
+ * processor.
*/
struct paca_struct {
/*
@@ -55,14 +52,7 @@ struct paca_struct {
* avoid cacheline bouncing.
*/
- /*
- * MAGIC: These first two pointers can't be moved - they're
- * accessed by the firmware
- */
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
-#ifdef CONFIG_PPC_ISERIES
- void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
-#endif /* CONFIG_PPC_ISERIES */
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
index df47bbb6ea1..6c850609b84 100644
--- a/include/asm-powerpc/page.h
+++ b/include/asm-powerpc/page.h
@@ -53,6 +53,7 @@
#define PAGE_OFFSET ASM_CONST(CONFIG_KERNEL_START)
#define KERNELBASE (PAGE_OFFSET + PHYSICAL_START)
+#define LOAD_OFFSET PAGE_OFFSET
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) ((pfn) < max_mapnr)
diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h
index 65ea19eec95..51f8134b593 100644
--- a/include/asm-powerpc/page_32.h
+++ b/include/asm-powerpc/page_32.h
@@ -3,8 +3,6 @@
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
-#define PPC_MEMSTART 0
-
#ifdef CONFIG_NOT_COHERENT_CACHE
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#endif
diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h
index b4526ff3a50..19fd7933e2d 100644
--- a/include/asm-powerpc/pasemi_dma.h
+++ b/include/asm-powerpc/pasemi_dma.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 PA Semi, Inc
+ * Copyright (C) 2006-2008 PA Semi, Inc
*
* Hardware register layout and descriptor formats for the on-board
* DMA engine on PA Semi PWRficient. Used by ethernet, function and security
@@ -40,6 +40,11 @@ enum {
PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */
PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */
PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */
+ PAS_DMA_COM_CFG = 0x114, /* Common config reg */
+ PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */
+ PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */
+ PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */
+ PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */
};
@@ -123,11 +128,16 @@ enum {
#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100
#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */
+#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */
+#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */
+#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */
#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c
#define PAS_DMA_TXCHAN_CFG_TATTR_S 2
#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
PAS_DMA_TXCHAN_CFG_TATTR_M)
-#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0
+#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800
+#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400
+#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0
#define PAS_DMA_TXCHAN_CFG_WT_S 6
#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
PAS_DMA_TXCHAN_CFG_WT_M)
@@ -394,11 +404,62 @@ enum {
XCT_COPY_LLEN_M)
#define XCT_COPY_SE 0x0000000000000001ull
+/* Function descriptor fields */
+#define XCT_FUN_T 0x8000000000000000ull
+#define XCT_FUN_ST 0x4000000000000000ull
+#define XCT_FUN_RR_M 0x3000000000000000ull
+#define XCT_FUN_RR_NORES 0x0000000000000000ull
+#define XCT_FUN_RR_8BRES 0x1000000000000000ull
+#define XCT_FUN_RR_24BRES 0x2000000000000000ull
+#define XCT_FUN_RR_40BRES 0x3000000000000000ull
+#define XCT_FUN_I 0x0800000000000000ull
+#define XCT_FUN_O 0x0400000000000000ull
+#define XCT_FUN_E 0x0200000000000000ull
+#define XCT_FUN_FUN_M 0x01c0000000000000ull
+#define XCT_FUN_FUN_S 54
+#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M 0x0038000000000000ull
+#define XCT_FUN_CRM_NOP 0x0000000000000000ull
+#define XCT_FUN_CRM_SIG 0x0008000000000000ull
+#define XCT_FUN_LLEN_M 0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S 32
+#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M 0x00000000f8000000ull
+#define XCT_FUN_SHL_S 27
+#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M 0x0000000007c00000ull
+#define XCT_FUN_HSZ_M 0x00000000003c0000ull
+#define XCT_FUN_ALG_M 0x0000000000038000ull
+#define XCT_FUN_HP 0x0000000000004000ull
+#define XCT_FUN_BCM_M 0x0000000000003800ull
+#define XCT_FUN_BCP_M 0x0000000000000600ull
+#define XCT_FUN_SIG_M 0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4 0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6 0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4 0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6 0x0000000000000170ull
+#define XCT_FUN_A 0x0000000000000008ull
+#define XCT_FUN_C 0x0000000000000004ull
+#define XCT_FUN_AL2 0x0000000000000002ull
+#define XCT_FUN_SE 0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S 32
+#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S 0
+
/* Control descriptor fields */
#define CTRL_CMD_T 0x8000000000000000ull
#define CTRL_CMD_META_EVT 0x2000000000000000ull
#define CTRL_CMD_O 0x0400000000000000ull
-#define CTRL_CMD_REG_M 0x000000000000000full
+#define CTRL_CMD_ETYPE_M 0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull
+#define CTRL_CMD_REG_M 0x000000000000007full
#define CTRL_CMD_REG_S 0
#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \
CTRL_CMD_REG_M)
@@ -461,6 +522,16 @@ extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
dma_addr_t *handle);
+/* Routines to allocate flags (events) for channel syncronization */
+extern int pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
/* Initialize the library, must be called before any other functions */
extern int pasemi_dma_init(void);
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index e5802c62f42..b95d033ae6e 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -117,7 +117,7 @@ struct pci_controller {
#ifndef CONFIG_PPC64
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
}
@@ -235,7 +235,7 @@ extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
extern int pcibios_remove_root_bus(struct pci_controller *phb);
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
struct device_node *busdn = bus->sysdata;
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 2c79f550272..daea7692d07 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -98,9 +98,6 @@ extern int icache_44x_need_flush;
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
-
#define pte_ERROR(e) \
printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
(unsigned long long)pte_val(e))
@@ -420,7 +417,8 @@ extern int icache_44x_need_flush;
#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+ defined(CONFIG_KPROBES)
/* We want the debuggers to be able to set breakpoints anywhere, so
* don't write protect the kernel text */
#define _PAGE_RAM_TEXT _PAGE_RAM
@@ -692,7 +690,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
#define pmd_page_vaddr(pmd) \
((unsigned long) (pmd_val(pmd) & PAGE_MASK))
#define pmd_page(pmd) \
- (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+ pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
#endif
/* to find an entry in a kernel page-table-directory */
diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h
new file mode 100644
index 00000000000..fa74c6c3e10
--- /dev/null
+++ b/include/asm-powerpc/phyp_dump.h
@@ -0,0 +1,47 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END (1UL<<28)
+
+struct phyp_dump {
+ /* Memory that is reserved during very early boot. */
+ unsigned long init_reserve_start;
+ unsigned long init_reserve_size;
+ /* cmd line options during boot */
+ unsigned long reserve_bootvar;
+ unsigned long phyp_dump_at_boot;
+ /* Check status during boot if dump supported, active & present*/
+ unsigned long phyp_dump_configured;
+ unsigned long phyp_dump_is_active;
+ /* store cpu & hpte size */
+ unsigned long cpu_state_size;
+ unsigned long hpte_region_size;
+ /* previous scratch area values */
+ unsigned long reserved_scratch_addr;
+ unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+ const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h
index 2259d4ce384..e1dc090748d 100644
--- a/include/asm-powerpc/pmi.h
+++ b/include/asm-powerpc/pmi.h
@@ -29,8 +29,6 @@
#ifdef __KERNEL__
-#include <asm/of_device.h>
-
#define PMI_TYPE_FREQ_CHANGE 0x01
#define PMI_READ_TYPE 0
#define PMI_READ_DATA0 1
diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h
new file mode 100644
index 00000000000..033039a80c4
--- /dev/null
+++ b/include/asm-powerpc/ppc4xx.h
@@ -0,0 +1,18 @@
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 2b693673eff..9e8ed6824e1 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -434,8 +434,11 @@ struct ps3_sys_manager_ops {
};
void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
-void ps3_sys_manager_power_off(void);
-void ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
struct ps3_prealloc {
const char *name;
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
index 891d68932f3..39023dde1cc 100644
--- a/include/asm-powerpc/ptrace.h
+++ b/include/asm-powerpc/ptrace.h
@@ -58,6 +58,11 @@ struct pt_regs {
#define __ARCH_WANT_COMPAT_SYS_PTRACE
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
+#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \
+ STACK_FRAME_OVERHEAD + 288)
+#define STACK_FRAME_MARKER 12
/* Size of dummy stack frame allocated when calling signal handler. */
#define __SIGNAL_FRAMESIZE 128
@@ -66,6 +71,10 @@ struct pt_regs {
#else /* __powerpc64__ */
#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773)
+#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+#define STACK_FRAME_MARKER 2
/* Size of stack frame allocated when calling signal handler. */
#define __SIGNAL_FRAMESIZE 64
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index 430dc77b35f..c3be6e2e149 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -85,6 +85,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val);
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
@@ -92,7 +93,16 @@ unsigned long qe_muram_alloc(int size, int align);
int qe_muram_free(unsigned long offset);
unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
void qe_muram_dump(void);
-void *qe_muram_addr(unsigned long offset);
+
+static inline void __iomem *qe_muram_addr(unsigned long offset)
+{
+ return (void __iomem *)&qe_immr->muram[offset];
+}
+
+static inline unsigned long qe_muram_offset(void __iomem *addr)
+{
+ return addr - (void __iomem *)qe_immr->muram;
+}
/* Structure that defines QE firmware binary files.
*
diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h
index cefc14728cc..a6cc93b78b9 100644
--- a/include/asm-powerpc/rwsem.h
+++ b/include/asm-powerpc/rwsem.h
@@ -32,11 +32,20 @@ struct rw_semaphore {
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
spinlock_t wait_lock;
struct list_head wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ struct lockdep_map dep_map;
+#endif
};
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
#define __RWSEM_INITIALIZER(name) \
- { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
- LIST_HEAD_INIT((name).wait_list) }
+ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+ LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
#define DECLARE_RWSEM(name) \
struct rw_semaphore name = __RWSEM_INITIALIZER(name)
@@ -46,12 +55,15 @@ extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-static inline void init_rwsem(struct rw_semaphore *sem)
-{
- sem->count = RWSEM_UNLOCKED_VALUE;
- spin_lock_init(&sem->wait_lock);
- INIT_LIST_HEAD(&sem->wait_list);
-}
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+ struct lock_class_key *key);
+
+#define init_rwsem(sem) \
+ do { \
+ static struct lock_class_key __key; \
+ \
+ __init_rwsem((sem), #sem, &__key); \
+ } while (0)
/*
* lock for reading
@@ -78,7 +90,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
/*
* lock for writing
*/
-static inline void __down_write(struct rw_semaphore *sem)
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
{
int tmp;
@@ -88,6 +100,11 @@ static inline void __down_write(struct rw_semaphore *sem)
rwsem_down_write_failed(sem);
}
+static inline void __down_write(struct rw_semaphore *sem)
+{
+ __down_write_nested(sem, 0);
+}
+
static inline int __down_write_trylock(struct rw_semaphore *sem)
{
int tmp;
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
index e8b493d52b4..9aea8e9f0bd 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/include/asm-powerpc/sparsemem.h
@@ -15,6 +15,7 @@
#ifdef CONFIG_MEMORY_HOTPLUG
extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
#ifdef CONFIG_NUMA
extern int hot_add_scn_to_nid(unsigned long scn_addr);
#else
diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h
index cc4cfceac67..258c9399319 100644
--- a/include/asm-powerpc/spinlock.h
+++ b/include/asm-powerpc/spinlock.h
@@ -19,6 +19,7 @@
*
* (the type definitions are in asm/spinlock_types.h)
*/
+#include <linux/irqflags.h>
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#include <asm/hvcall.h>
diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h
index aa40f92c298..e40010abcaf 100644
--- a/include/asm-powerpc/string.h
+++ b/include/asm-powerpc/string.h
@@ -7,6 +7,7 @@
#define __HAVE_ARCH_STRNCPY
#define __HAVE_ARCH_STRLEN
#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
#define __HAVE_ARCH_STRCAT
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
@@ -18,6 +19,7 @@ extern char * strcpy(char *,const char *);
extern char * strncpy(char *,const char *, __kernel_size_t);
extern __kernel_size_t strlen(const char *);
extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
extern char * strcat(char *, const char *);
extern void * memset(void *,int,__kernel_size_t);
extern void * memcpy(void *,const void *,__kernel_size_t);
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 29552ff182a..fab1674b31b 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -5,6 +5,7 @@
#define _ASM_POWERPC_SYSTEM_H
#include <linux/kernel.h>
+#include <linux/irqflags.h>
#include <asm/hw_irq.h>
diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h
index 903fd193243..c243a6ac60e 100644
--- a/include/asm-powerpc/types.h
+++ b/include/asm-powerpc/types.h
@@ -84,6 +84,13 @@ typedef unsigned long long u64;
typedef __vector128 vector128;
+/* Physical address used by some IO functions */
+#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
+typedef u64 phys_addr_t;
+#else
+typedef u32 phys_addr_t;
+#endif
+
#ifdef __powerpc64__
typedef u64 dma_addr_t;
#else
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
new file mode 100644
index 00000000000..6a352cbcf52
--- /dev/null
+++ b/include/asm-sparc64/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT 0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
new file mode 100644
index 00000000000..271153d27fb
--- /dev/null
+++ b/include/linux/lmb.h
@@ -0,0 +1,85 @@
+#ifndef _LINUX_LMB_H
+#define _LINUX_LMB_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_LMB_REGIONS 128
+
+struct lmb_property {
+ u64 base;
+ u64 size;
+};
+
+struct lmb_region {
+ unsigned long cnt;
+ u64 size;
+ struct lmb_property region[MAX_LMB_REGIONS+1];
+};
+
+struct lmb {
+ unsigned long debug;
+ u64 rmo_size;
+ struct lmb_region memory;
+ struct lmb_region reserved;
+};
+
+extern struct lmb lmb;
+
+extern void __init lmb_init(void);
+extern void __init lmb_analyze(void);
+extern long __init lmb_add(u64 base, u64 size);
+extern long __init lmb_reserve(u64 base, u64 size);
+extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
+ u64 (*nid_range)(u64, u64, int *));
+extern u64 __init lmb_alloc(u64 size, u64 align);
+extern u64 __init lmb_alloc_base(u64 size,
+ u64, u64 max_addr);
+extern u64 __init __lmb_alloc_base(u64 size,
+ u64 align, u64 max_addr);
+extern u64 __init lmb_phys_mem_size(void);
+extern u64 __init lmb_end_of_DRAM(void);
+extern void __init lmb_enforce_memory_limit(u64 memory_limit);
+extern int __init lmb_is_reserved(u64 addr);
+
+extern void lmb_dump_all(void);
+
+static inline u64
+lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].size;
+}
+static inline u64
+lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
+{
+ return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+ return lmb_start_pfn(type, region_nr) +
+ lmb_size_pages(type, region_nr);
+}
+
+#include <asm/lmb.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_LMB_H */
diff --git a/include/linux/of.h b/include/linux/of.h
index 6981016dcc2..59a61bdc98b 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -62,6 +62,7 @@ extern struct property *of_find_property(const struct device_node *np,
int *lenp);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
+extern int of_device_is_available(const struct device_node *device);
extern const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp);
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
new file mode 100644
index 00000000000..2ee97e9877a
--- /dev/null
+++ b/include/linux/of_gpio.h
@@ -0,0 +1,69 @@
+/*
+ * OF helpers for the GPIO API
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_GPIO_H
+#define __LINUX_OF_GPIO_H
+
+#include <linux/errno.h>
+#include <asm/gpio.h>
+
+#ifdef CONFIG_OF_GPIO
+
+/*
+ * Generic OF GPIO chip
+ */
+struct of_gpio_chip {
+ struct gpio_chip gc;
+ int gpio_cells;
+ int (*xlate)(struct of_gpio_chip *of_gc, struct device_node *np,
+ const void *gpio_spec);
+};
+
+static inline struct of_gpio_chip *to_of_gpio_chip(struct gpio_chip *gc)
+{
+ return container_of(gc, struct of_gpio_chip, gc);
+}
+
+/*
+ * OF GPIO chip for memory mapped banks
+ */
+struct of_mm_gpio_chip {
+ struct of_gpio_chip of_gc;
+ void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
+ void __iomem *regs;
+};
+
+static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
+{
+ struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
+
+ return container_of(of_gc, struct of_mm_gpio_chip, of_gc);
+}
+
+extern int of_get_gpio(struct device_node *np, int index);
+extern int of_mm_gpiochip_add(struct device_node *np,
+ struct of_mm_gpio_chip *mm_gc);
+extern int of_gpio_simple_xlate(struct of_gpio_chip *of_gc,
+ struct device_node *np,
+ const void *gpio_spec);
+#else
+
+/* Drivers may not strictly depend on the GPIO support, so let them link. */
+static inline int of_get_gpio(struct device_node *np, int index)
+{
+ return -ENOSYS;
+}
+
+#endif /* CONFIG_OF_GPIO */
+
+#endif /* __LINUX_OF_GPIO_H */
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
new file mode 100644
index 00000000000..2e5a9673204
--- /dev/null
+++ b/include/linux/of_i2c.h
@@ -0,0 +1,24 @@
+/*
+ * Generic I2C API implementation for PowerPC.
+ *
+ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_I2C_H
+#define __LINUX_OF_I2C_H
+
+#include <linux/i2c.h>
+
+#ifdef CONFIG_OF_I2C
+
+void of_register_i2c_devices(struct i2c_adapter *adap,
+ struct device_node *adap_node);
+
+#endif /* CONFIG_OF_I2C */
+
+#endif /* __LINUX_OF_I2C_H */
diff --git a/lib/Kconfig b/lib/Kconfig
index ba3d104994d..2d53dc092e8 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -141,4 +141,7 @@ config HAS_DMA
config CHECK_SIGNATURE
bool
+config HAVE_LMB
+ boolean
+
endmenu
diff --git a/lib/Makefile b/lib/Makefile
index 4d7649c326f..bf8000fc7d4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -68,6 +68,8 @@ obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
lib-$(CONFIG_GENERIC_BUG) += bug.o
+obj-$(CONFIG_HAVE_LMB) += lmb.o
+
hostprogs-y := gen_crc32table
clean-files := crc32table.h
diff --git a/lib/lmb.c b/lib/lmb.c
new file mode 100644
index 00000000000..896e2832099
--- /dev/null
+++ b/lib/lmb.c
@@ -0,0 +1,428 @@
+/*
+ * Procedures for maintaining information about logical memory blocks.
+ *
+ * Peter Bergner, IBM Corp. June 2001.
+ * Copyright (C) 2001 Peter Bergner.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/lmb.h>
+
+#define LMB_ALLOC_ANYWHERE 0
+
+struct lmb lmb;
+
+void lmb_dump_all(void)
+{
+#ifdef DEBUG
+ unsigned long i;
+
+ pr_debug("lmb_dump_all:\n");
+ pr_debug(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
+ pr_debug(" memory.size = 0x%llx\n",
+ (unsigned long long)lmb.memory.size);
+ for (i=0; i < lmb.memory.cnt ;i++) {
+ pr_debug(" memory.region[0x%x].base = 0x%llx\n",
+ i, (unsigned long long)lmb.memory.region[i].base);
+ pr_debug(" .size = 0x%llx\n",
+ (unsigned long long)lmb.memory.region[i].size);
+ }
+
+ pr_debug(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
+ pr_debug(" reserved.size = 0x%lx\n", lmb.reserved.size);
+ for (i=0; i < lmb.reserved.cnt ;i++) {
+ pr_debug(" reserved.region[0x%x].base = 0x%llx\n",
+ i, (unsigned long long)lmb.reserved.region[i].base);
+ pr_debug(" .size = 0x%llx\n",
+ (unsigned long long)lmb.reserved.region[i].size);
+ }
+#endif /* DEBUG */
+}
+
+static unsigned long __init lmb_addrs_overlap(u64 base1, u64 size1,
+ u64 base2, u64 size2)
+{
+ return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
+}
+
+static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
+ u64 base2, u64 size2)
+{
+ if (base2 == base1 + size1)
+ return 1;
+ else if (base1 == base2 + size2)
+ return -1;
+
+ return 0;
+}
+
+static long __init lmb_regions_adjacent(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ u64 base1 = rgn->region[r1].base;
+ u64 size1 = rgn->region[r1].size;
+ u64 base2 = rgn->region[r2].base;
+ u64 size2 = rgn->region[r2].size;
+
+ return lmb_addrs_adjacent(base1, size1, base2, size2);
+}
+
+static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
+{
+ unsigned long i;
+
+ for (i = r; i < rgn->cnt - 1; i++) {
+ rgn->region[i].base = rgn->region[i + 1].base;
+ rgn->region[i].size = rgn->region[i + 1].size;
+ }
+ rgn->cnt--;
+}
+
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ rgn->region[r1].size += rgn->region[r2].size;
+ lmb_remove_region(rgn, r2);
+}
+
+void __init lmb_init(void)
+{
+ /* Create a dummy zero size LMB which will get coalesced away later.
+ * This simplifies the lmb_add() code below...
+ */
+ lmb.memory.region[0].base = 0;
+ lmb.memory.region[0].size = 0;
+ lmb.memory.cnt = 1;
+
+ /* Ditto. */
+ lmb.reserved.region[0].base = 0;
+ lmb.reserved.region[0].size = 0;
+ lmb.reserved.cnt = 1;
+}
+
+void __init lmb_analyze(void)
+{
+ int i;
+
+ lmb.memory.size = 0;
+
+ for (i = 0; i < lmb.memory.cnt; i++)
+ lmb.memory.size += lmb.memory.region[i].size;
+}
+
+static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
+{
+ unsigned long coalesced = 0;
+ long adjacent, i;
+
+ if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ return 0;
+ }
+
+ /* First try and coalesce this LMB with another. */
+ for (i = 0; i < rgn->cnt; i++) {
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
+
+ if ((rgnbase == base) && (rgnsize == size))
+ /* Already have this region, so we're done */
+ return 0;
+
+ adjacent = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
+ if (adjacent > 0) {
+ rgn->region[i].base -= size;
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ } else if (adjacent < 0) {
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ }
+ }
+
+ if ((i < rgn->cnt - 1) && lmb_regions_adjacent(rgn, i, i+1)) {
+ lmb_coalesce_regions(rgn, i, i+1);
+ coalesced++;
+ }
+
+ if (coalesced)
+ return coalesced;
+ if (rgn->cnt >= MAX_LMB_REGIONS)
+ return -1;
+
+ /* Couldn't coalesce the LMB, so add it to the sorted table. */
+ for (i = rgn->cnt - 1; i >= 0; i--) {
+ if (base < rgn->region[i].base) {
+ rgn->region[i+1].base = rgn->region[i].base;
+ rgn->region[i+1].size = rgn->region[i].size;
+ } else {
+ rgn->region[i+1].base = base;
+ rgn->region[i+1].size = size;
+ break;
+ }
+ }
+
+ if (base < rgn->region[0].base) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ }
+ rgn->cnt++;
+
+ return 0;
+}
+
+long __init lmb_add(u64 base, u64 size)
+{
+ struct lmb_region *_rgn = &lmb.memory;
+
+ /* On pSeries LPAR systems, the first LMB is our RMO region. */
+ if (base == 0)
+ lmb.rmo_size = size;
+
+ return lmb_add_region(_rgn, base, size);
+
+}
+
+long __init lmb_reserve(u64 base, u64 size)
+{
+ struct lmb_region *_rgn = &lmb.reserved;
+
+ BUG_ON(0 == size);
+
+ return lmb_add_region(_rgn, base, size);
+}
+
+long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
+{
+ unsigned long i;
+
+ for (i = 0; i < rgn->cnt; i++) {
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
+ if (lmb_addrs_overlap(base, size, rgnbase, rgnsize))
+ break;
+ }
+
+ return (i < rgn->cnt) ? i : -1;
+}
+
+static u64 lmb_align_down(u64 addr, u64 size)
+{
+ return addr & ~(size - 1);
+}
+
+static u64 lmb_align_up(u64 addr, u64 size)
+{
+ return (addr + (size - 1)) & ~(size - 1);
+}
+
+static u64 __init lmb_alloc_nid_unreserved(u64 start, u64 end,
+ u64 size, u64 align)
+{
+ u64 base, res_base;
+ long j;
+
+ base = lmb_align_down((end - size), align);
+ while (start <= base) {
+ j = lmb_overlaps_region(&lmb.reserved, base, size);
+ if (j < 0) {
+ /* this area isn't reserved, take it */
+ if (lmb_add_region(&lmb.reserved, base,
+ lmb_align_up(size, align)) < 0)
+ base = ~(u64)0;
+ return base;
+ }
+ res_base = lmb.reserved.region[j].base;
+ if (res_base < size)
+ break;
+ base = lmb_align_down(res_base - size, align);
+ }
+
+ return ~(u64)0;
+}
+
+static u64 __init lmb_alloc_nid_region(struct lmb_property *mp,
+ u64 (*nid_range)(u64, u64, int *),
+ u64 size, u64 align, int nid)
+{
+ u64 start, end;
+
+ start = mp->base;
+ end = start + mp->size;
+
+ start = lmb_align_up(start, align);
+ while (start < end) {
+ u64 this_end;
+ int this_nid;
+
+ this_end = nid_range(start, end, &this_nid);
+ if (this_nid == nid) {
+ u64 ret = lmb_alloc_nid_unreserved(start, this_end,
+ size, align);
+ if (ret != ~(u64)0)
+ return ret;
+ }
+ start = this_end;
+ }
+
+ return ~(u64)0;
+}
+
+u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
+ u64 (*nid_range)(u64 start, u64 end, int *nid))
+{
+ struct lmb_region *mem = &lmb.memory;
+ int i;
+
+ for (i = 0; i < mem->cnt; i++) {
+ u64 ret = lmb_alloc_nid_region(&mem->region[i],
+ nid_range,
+ size, align, nid);
+ if (ret != ~(u64)0)
+ return ret;
+ }
+
+ return lmb_alloc(size, align);
+}
+
+u64 __init lmb_alloc(u64 size, u64 align)
+{
+ return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
+}
+
+u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+ u64 alloc;
+
+ alloc = __lmb_alloc_base(size, align, max_addr);
+
+ if (alloc == 0)
+ panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+ (unsigned long long) size, (unsigned long long) max_addr);
+
+ return alloc;
+}
+
+u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+ long i, j;
+ u64 base = 0;
+ u64 res_base;
+
+ BUG_ON(0 == size);
+
+ /* On some platforms, make sure we allocate lowmem */
+ /* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
+ if (max_addr == LMB_ALLOC_ANYWHERE)
+ max_addr = LMB_REAL_LIMIT;
+
+ for (i = lmb.memory.cnt - 1; i >= 0; i--) {
+ u64 lmbbase = lmb.memory.region[i].base;
+ u64 lmbsize = lmb.memory.region[i].size;
+
+ if (lmbsize < size)
+ continue;
+ if (max_addr == LMB_ALLOC_ANYWHERE)
+ base = lmb_align_down(lmbbase + lmbsize - size, align);
+ else if (lmbbase < max_addr) {
+ base = min(lmbbase + lmbsize, max_addr);
+ base = lmb_align_down(base - size, align);
+ } else
+ continue;
+
+ while (base && lmbbase <= base) {
+ j = lmb_overlaps_region(&lmb.reserved, base, size);
+ if (j < 0) {
+ /* this area isn't reserved, take it */
+ if (lmb_add_region(&lmb.reserved, base,
+ size) < 0)
+ return 0;
+ return base;
+ }
+ res_base = lmb.reserved.region[j].base;
+ if (res_base < size)
+ break;
+ base = lmb_align_down(res_base - size, align);
+ }
+ }
+ return 0;
+}
+
+/* You must call lmb_analyze() before this. */
+u64 __init lmb_phys_mem_size(void)
+{
+ return lmb.memory.size;
+}
+
+u64 __init lmb_end_of_DRAM(void)
+{
+ int idx = lmb.memory.cnt - 1;
+
+ return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
+}
+
+/* You must call lmb_analyze() after this. */
+void __init lmb_enforce_memory_limit(u64 memory_limit)
+{
+ unsigned long i;
+ u64 limit;
+ struct lmb_property *p;
+
+ if (!memory_limit)
+ return;
+
+ /* Truncate the lmb regions to satisfy the memory limit. */
+ limit = memory_limit;
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ if (limit > lmb.memory.region[i].size) {
+ limit -= lmb.memory.region[i].size;
+ continue;
+ }
+
+ lmb.memory.region[i].size = limit;
+ lmb.memory.cnt = i + 1;
+ break;
+ }
+
+ if (lmb.memory.region[0].size < lmb.rmo_size)
+ lmb.rmo_size = lmb.memory.region[0].size;
+
+ /* And truncate any reserves above the limit also. */
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ p = &lmb.reserved.region[i];
+
+ if (p->base > memory_limit)
+ p->size = 0;
+ else if ((p->base + p->size) > memory_limit)
+ p->size = memory_limit - p->base;
+
+ if (p->size == 0) {
+ lmb_remove_region(&lmb.reserved, i);
+ i--;
+ }
+ }
+}
+
+int __init lmb_is_reserved(u64 addr)
+{
+ int i;
+
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ u64 upper = lmb.reserved.region[i].base +
+ lmb.reserved.region[i].size - 1;
+ if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
+ return 1;
+ }
+ return 0;
+}