aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorArun Murthy <arun.murthy@stericsson.com>2011-05-26 16:51:49 +0530
committersaid m bagheri <ebgheri@steludxu2848.(none)>2011-06-29 10:30:32 +0200
commit4f57aba4ce7cc9a1cdee02d1e2ae273d5cf6a7da (patch)
treee1432971f261d50407fd5ff636f8101c04251145
parent4b2ad154547f1c011dfec9351cf7d93c3c1e6536 (diff)
mach-ux500: platform data for ab5500 battery driver
ST-Ericsson Linux next: Not Tested ST-Ericsson ID: WP256401 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I81619ad06bc6f89962b2cfd4404e911cc77082ec Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23153 Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com> Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
-rw-r--r--arch/arm/mach-ux500/Makefile1
-rw-r--r--arch/arm/mach-ux500/board-u5500-bm.c496
-rw-r--r--arch/arm/mach-ux500/board-u5500-bm.h26
-rw-r--r--arch/arm/mach-ux500/board-u5500.c11
4 files changed, 534 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 5252fc085a7..202cdc98b59 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_UX500_PRCMU_QOS_POWER) += prcmu-qos-power.o
obj-$(CONFIG_UX500_DEBUG_HWREG) += hwreg.o
obj-$(CONFIG_HWMEM) += hwmem-int.o
obj-$(CONFIG_UX500_L2X0_PREFETCH_CTRL) += l2x0-prefetch.o
+obj-$(CONFIG_AB5500_BM) += board-u5500-bm.o
diff --git a/arch/arm/mach-ux500/board-u5500-bm.c b/arch/arm/mach-ux500/board-u5500-bm.c
new file mode 100644
index 00000000000..2616d7fa517
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-bm.c
@@ -0,0 +1,496 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * U5500 board specific charger and battery initialization parameters.
+ *
+ * License Terms: GNU General Public License v2
+ * Authors:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ */
+
+#include <linux/power_supply.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab5500.h>
+#include <linux/mfd/abx500/ab5500-bm.h>
+#include "board-u5500-bm.h"
+
+#ifdef CONFIG_AB5500_BATTERY_THERM_ON_BATCTRL
+/*
+ * These are the defined batteries that uses a NTC and ID resistor placed
+ * inside of the battery pack.
+ * Note that the abx500_res_to_temp table must be strictly sorted by falling resistance
+ * values to work.
+ */
+static struct abx500_res_to_temp temp_tbl_type1[] = {
+ {-20, 67400},
+ { 0, 49200},
+ { 5, 44200},
+ { 10, 39400},
+ { 15, 35000},
+ { 20, 31000},
+ { 25, 27400},
+ { 30, 24300},
+ { 35, 21700},
+ { 40, 19400},
+ { 45, 17500},
+ { 50, 15900},
+ { 55, 14600},
+ { 60, 13500},
+ { 65, 12500},
+ { 70, 11800},
+ {100, 9200},
+};
+
+static struct abx500_res_to_temp temp_tbl_type2[] = {
+ {-20, 180700},
+ { 0, 160000},
+ { 5, 152700},
+ { 10, 144900},
+ { 15, 136800},
+ { 20, 128700},
+ { 25, 121000},
+ { 30, 113800},
+ { 35, 107300},
+ { 40, 101500},
+ { 45, 96500},
+ { 50, 92200},
+ { 55, 88600},
+ { 60, 85600},
+ { 65, 83000},
+ { 70, 80900},
+ {100, 73900},
+};
+
+static struct abx500_res_to_temp temp_tbl_A[] = {
+ {-5, 53407},
+ { 0, 48594},
+ { 5, 43804},
+ {10, 39188},
+ {15, 34870},
+ {20, 30933},
+ {25, 27422},
+ {30, 24347},
+ {35, 21694},
+ {40, 19431},
+ {45, 17517},
+ {50, 15908},
+ {55, 14561},
+ {60, 13437},
+ {65, 12500},
+};
+
+static struct abx500_res_to_temp temp_tbl_B[] = {
+ {-5, 165418},
+ { 0, 159024},
+ { 5, 151921},
+ {10, 144300},
+ {15, 136424},
+ {20, 128565},
+ {25, 120978},
+ {30, 113875},
+ {35, 107397},
+ {40, 101629},
+ {45, 96592},
+ {50, 92253},
+ {55, 88569},
+ {60, 85461},
+ {65, 82869},
+};
+
+static struct abx500_v_to_cap cap_tbl_type1[] = {
+ {4171, 100},
+ {4114, 95},
+ {4009, 83},
+ {3947, 74},
+ {3907, 67},
+ {3863, 59},
+ {3830, 56},
+ {3813, 53},
+ {3791, 46},
+ {3771, 33},
+ {3754, 25},
+ {3735, 20},
+ {3717, 17},
+ {3681, 13},
+ {3664, 8},
+ {3651, 6},
+ {3635, 5},
+ {3560, 3},
+ {3408, 1},
+ {3247, 0},
+};
+
+static struct abx500_v_to_cap cap_tbl_A[] = {
+ {4171, 100},
+ {4114, 95},
+ {4009, 83},
+ {3947, 74},
+ {3907, 67},
+ {3863, 59},
+ {3830, 56},
+ {3813, 53},
+ {3791, 46},
+ {3771, 33},
+ {3754, 25},
+ {3735, 20},
+ {3717, 17},
+ {3681, 13},
+ {3664, 8},
+ {3651, 6},
+ {3635, 5},
+ {3560, 3},
+ {3408, 1},
+ {3247, 0},
+};
+static struct abx500_v_to_cap cap_tbl_B[] = {
+ {4161, 100},
+ {4124, 98},
+ {4044, 90},
+ {4003, 85},
+ {3966, 80},
+ {3933, 75},
+ {3888, 67},
+ {3849, 60},
+ {3813, 55},
+ {3787, 47},
+ {3772, 30},
+ {3751, 25},
+ {3718, 20},
+ {3681, 16},
+ {3660, 14},
+ {3589, 10},
+ {3546, 7},
+ {3495, 4},
+ {3404, 2},
+ {3250, 0},
+};
+#endif
+static struct abx500_v_to_cap cap_tbl[] = {
+ {4186, 100},
+ {4163, 99},
+ {4114, 95},
+ {4068, 90},
+ {3990, 80},
+ {3926, 70},
+ {3898, 65},
+ {3866, 60},
+ {3833, 55},
+ {3812, 50},
+ {3787, 40},
+ {3768, 30},
+ {3747, 25},
+ {3730, 20},
+ {3705, 15},
+ {3699, 14},
+ {3684, 12},
+ {3672, 9},
+ {3657, 7},
+ {3638, 6},
+ {3556, 4},
+ {3424, 2},
+ {3317, 1},
+ {3094, 0},
+};
+
+/*
+ * Note that the abx500_res_to_temp table must be strictly sorted by falling
+ * resistance values to work.
+ */
+static struct abx500_res_to_temp temp_tbl[] = {
+ {-5, 214834},
+ { 0, 162943},
+ { 5, 124820},
+ {10, 96520},
+ {15, 75306},
+ {20, 59254},
+ {25, 47000},
+ {30, 37566},
+ {35, 30245},
+ {40, 24520},
+ {45, 20010},
+ {50, 16432},
+ {55, 13576},
+ {60, 11280},
+ {65, 9425},
+};
+
+static const struct abx500_battery_type bat_type[] = {
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4025,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ },
+
+#ifdef CONFIG_AB5500_BATTERY_THERM_ON_BATCTRL
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 70000,
+ .resis_low = 8200,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4025,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4025,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_type1),
+ .r_to_t_tbl = temp_tbl_type1,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_type1),
+ .v_to_cap_tbl = cap_tbl_type1,
+
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 165418,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4025,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4025,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B),
+ .r_to_t_tbl = temp_tbl_B,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B),
+ .v_to_cap_tbl = cap_tbl_B,
+ },
+#else
+/*
+ * These are the batteries that doesn't have an internal NTC resistor to measure
+ * its temperature. The temperature in this case is measure with a NTC placed
+ * near the battery but on the PCB.
+ */
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4025,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4025,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4025,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4025,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4025,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4025,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ },
+#endif
+};
+
+static char *ab5500_charger_supplied_to[] = {
+ "abx500_chargalg",
+ "ab5500_fg",
+ "ab5500_btemp",
+};
+
+static char *ab5500_btemp_supplied_to[] = {
+ "abx500_chargalg",
+ "ab5500_fg",
+};
+
+static char *ab5500_fg_supplied_to[] = {
+ "abx500_chargalg",
+};
+
+static char *abx500_chargalg_supplied_to[] = {
+ "ab5500_fg",
+};
+
+struct abx500_charger_platform_data ab5500_charger_plat_data = {
+ .supplied_to = ab5500_charger_supplied_to,
+ .num_supplicants = ARRAY_SIZE(ab5500_charger_supplied_to),
+};
+
+struct abx500_btemp_platform_data ab5500_btemp_plat_data = {
+ .supplied_to = ab5500_btemp_supplied_to,
+ .num_supplicants = ARRAY_SIZE(ab5500_btemp_supplied_to),
+};
+
+struct abx500_fg_platform_data ab5500_fg_plat_data = {
+ .supplied_to = ab5500_fg_supplied_to,
+ .num_supplicants = ARRAY_SIZE(ab5500_fg_supplied_to),
+};
+
+struct abx500_chargalg_platform_data abx500_chargalg_plat_data = {
+ .supplied_to = abx500_chargalg_supplied_to,
+ .num_supplicants = ARRAY_SIZE(abx500_chargalg_supplied_to),
+};
+
+static const struct abx500_bm_capacity_levels cap_levels = {
+ .critical = 2,
+ .low = 10,
+ .normal = 70,
+ .high = 95,
+ .full = 100,
+};
+
+static const struct abx500_fg_parameters fg = {
+ .recovery_sleep_timer = 10,
+ .recovery_total_time = 100,
+ .init_timer = 1,
+ .init_discard_time = 5,
+ .init_total_time = 40,
+ .high_curr_time = 60,
+ .accu_charging = 30,
+ .accu_high_curr = 30,
+ .high_curr_threshold = 50,
+ .lowbat_threshold = 3100,
+};
+
+static const struct abx500_maxim_parameters maxi_params = {
+ .ena_maxi = true,
+ .chg_curr = 910,
+ .wait_cycles = 10,
+ .charger_curr_step = 100,
+};
+
+static const struct abx500_bm_charger_parameters chg = {
+ .usb_volt_max = 5500,
+ .usb_curr_max = 1500,
+ .ac_volt_max = 7500,
+ .ac_curr_max = 1500,
+};
+
+struct abx500_bm_data ab5500_bm_data = {
+ .temp_under = 3,
+ .temp_low = 8,
+ /* TODO: Need to verify the temp values */
+ .temp_high = 155,
+ .temp_over = 160,
+ .main_safety_tmr_h = 4,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = 0x00,
+ .bkup_bat_i = 0x00,
+ .no_maintenance = true,
+#ifdef CONFIG_AB5500_BATTERY_THERM_ON_BATCTRL
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+#else
+ .adc_therm = ABx500_ADC_THERM_BATTEMP,
+#endif
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 20,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type,
+ .n_btypes = ARRAY_SIZE(bat_type),
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .maxi = &maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
+};
+
+/* ab5500 energy management platform data */
+struct abx500_bm_plat_data abx500_bm_pt_data = {
+ .battery = &ab5500_bm_data,
+ .charger = &ab5500_charger_plat_data,
+ .btemp = &ab5500_btemp_plat_data,
+ .fg = &ab5500_fg_plat_data,
+ .chargalg = &abx500_chargalg_plat_data,
+};
diff --git a/arch/arm/mach-ux500/board-u5500-bm.h b/arch/arm/mach-ux500/board-u5500-bm.h
new file mode 100644
index 00000000000..a6346905911
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-bm.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * U5500 board specific charger and battery initialization parameters.
+ *
+ * License Terms: GNU General Public License v2
+ * Authors:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ */
+
+#ifndef __BOARD_U5500_BM_H
+#define __BOARD_U5500_BM_H
+
+#include <linux/mfd/abx500/ab5500-bm.h>
+
+extern struct abx500_charger_platform_data ab5500_charger_plat_data;
+extern struct abx500_btemp_platform_data ab5500_btemp_plat_data;
+extern struct abx500_fg_platform_data ab5500_fg_plat_data;
+extern struct abx500_chargalg_platform_data abx500_chargalg_plat_data;
+extern struct abx500_bm_data ab5500_bm_data;
+extern struct abx500_bm_plat_data abx500_bm_pt_data;
+
+#endif
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 80df538d1eb..9abc6cf06a7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -37,6 +37,7 @@
#include "pins-db5500.h"
#include "devices-db5500.h"
#include "board-u5500.h"
+#include "board-u5500-bm.h"
/*
* LSM303DLH
@@ -333,6 +334,16 @@ static struct ab5500_platform_data ab5500_plf_data = {
},
},
.init_settings_sz = 2,
+#if defined(CONFIG_AB5500_BM)
+ .dev_data[AB5500_DEVID_CHARGALG] = &abx500_bm_pt_data,
+ .dev_data_sz[AB5500_DEVID_CHARGALG] = sizeof(abx500_bm_pt_data),
+ .dev_data[AB5500_DEVID_CHARGER] = &abx500_bm_pt_data,
+ .dev_data_sz[AB5500_DEVID_CHARGER] = sizeof(abx500_bm_pt_data),
+ .dev_data[AB5500_DEVID_FG] = &abx500_bm_pt_data,
+ .dev_data_sz[AB5500_DEVID_FG] = sizeof(abx500_bm_pt_data),
+ .dev_data[AB5500_DEVID_BTEMP] = &abx500_bm_pt_data,
+ .dev_data_sz[AB5500_DEVID_BTEMP] = sizeof(abx500_bm_pt_data),
+#endif
};
static struct platform_device u5500_ab5500_device = {