/* linux/drivers/serial/bast_sio.c
 *
 * Copyright (c) 2004 Simtec Electronics
 *   Ben Dooks <ben@simtec.co.uk>
 *
 * http://www.simtec.co.uk/products/EB2410ITX/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Modifications:
 *	23-Sep-2004  BJD  Added copyright header
 *	23-Sep-2004  BJD  Added serial port remove code
*/

#include <linux/module.h>
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/types.h>

#include <asm/io.h>
#include <asm/serial.h>
#include <asm/mach-types.h>

#include <asm/arch/map.h>
#include <asm/arch/irqs.h>
#include <asm/arch/bast-map.h>
#include <asm/arch/bast-irq.h>

static int __init serial_bast_register(unsigned long port, unsigned int irq)
{
	struct serial_struct serial_req;

	serial_req.flags      = UPF_AUTOPROBE | UPF_SHARE_IRQ;
	serial_req.baud_base  = BASE_BAUD;
	serial_req.irq        = irq;
	serial_req.io_type    = UPIO_MEM;
	serial_req.iomap_base = port;
	serial_req.iomem_base = ioremap(port, 0x10);
	serial_req.iomem_reg_shift = 0;

	return register_serial(&serial_req);
}

#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)

static int port[2] = { -1, -1 };

static int __init serial_bast_init(void)
{
	if (machine_is_bast()) {
		port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1);
		port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2);
	}

	return 0;
}

static void __exit serial_bast_exit(void)
{
	if (port[0] != -1)
		unregister_serial(port[0]);
	if (port[1] != -1)
		unregister_serial(port[1]);
}


module_init(serial_bast_init);
module_exit(serial_bast_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk");
MODULE_DESCRIPTION("BAST Onboard Serial setup");