/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * * Copyright (C) 2004-2006 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * * * * This program is free software; you can redistribute it and/or * * modify it under the terms of version 2 of the GNU General * * Public License as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful. * * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * * TO BE LEGALLY INVALID. See the GNU General Public License for * * more details, a copy of which can be found in the file COPYING * * included with this package. * *******************************************************************/ struct lpfc_sli2_slim; #define LPFC_MAX_TARGET 256 /* max targets supported */ #define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els req */ #define LPFC_MAX_NS_RETRY 3 /* max NameServer retries */ #define LPFC_DFT_HBA_Q_DEPTH 2048 /* max cmds per hba */ #define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */ #define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */ #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */ #define LPFC_SG_SEG_CNT 64 /* sg element count per scsi cmnd */ #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ /* Define macros for 64 bit support */ #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr))) #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32))) #define getPaddr(high, low) ((dma_addr_t)( \ (( (u64)(high)<<16 ) << 16)|( (u64)(low)))) /* Provide maximum configuration definitions. */ #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */ #define MAX_FCP_TARGET 256 /* max num of FCP targets supported */ #define FC_MAX_ADPTMSG 64 #define MAX_HBAEVT 32 enum lpfc_polling_flags { ENABLE_FCP_RING_POLLING = 0x1, DISABLE_FCP_RING_INT = 0x2 }; /* Provide DMA memory definitions the driver uses per port instance. */ struct lpfc_dmabuf { struct list_head list; void *virt; /* virtual address ptr */ dma_addr_t phys; /* mapped address */ }; struct lpfc_dma_pool { struct lpfc_dmabuf *elements; uint32_t max_count; uint32_t current_count; }; /* Priority bit. Set value to exceed low water mark in lpfc_mem. */ #define MEM_PRI 0x100 /****************************************************************************/ /* Device VPD save area */ /****************************************************************************/ typedef struct lpfc_vpd { uint32_t status; /* vpd status value */ uint32_t length; /* number of bytes actually returned */ struct { uint32_t rsvd1; /* Revision numbers */ uint32_t biuRev; uint32_t smRev; uint32_t smFwRev; uint32_t endecRev; uint16_t rBit; uint8_t fcphHigh; uint8_t fcphLow; uint8_t feaLevelHigh; uint8_t feaLevelLow; uint32_t postKernRev; uint32_t opFwRev; uint8_t opFwName[16]; uint32_t sli1FwRev; uint8_t sli1FwName[16]; uint32_t sli2FwRev; uint8_t sli2FwName[16]; } rev; } lpfc_vpd_t; struct lpfc_scsi_buf; /* * lpfc stat counters */ struct lpfc_stats { /* Statistics for ELS commands */ uint32_t elsLogiCol; uint32_t elsRetryExceeded; uint32_t elsXmitRetry; uint32_t elsDelayRetry; uint32_t elsRcvDrop; uint32_t elsRcvFrame; uint32_t elsRcvRSCN; uint32_t elsRcvRNID; uint32_t elsRcvFARP; uint32_t elsRcvFARPR; uint32_t elsRcvFLOGI; uint32_t elsRcvPLOGI; uint32_t elsRcvADISC; uint32_t elsRcvPDISC; uint32_t elsRcvFAN; uint32_t elsRcvLOGO; uint32_t elsRcvPRLO; uint32_t elsRcvPRLI; uint32_t elsRcvLIRR; uint32_t elsRcvRPS; uint32_t elsRcvRPL; uint32_t elsXmitFLOGI; uint32_t elsXmitPLOGI; uint32_t elsXmitPRLI; uint32_t elsXmitADISC; uint32_t elsXmitLOGO; uint32_t elsXmitSCR; uint32_t elsXmitRNID; uint32_t elsXmitFARP; uint32_t elsXmitFARPR; uint32_t elsXmitACC; uint32_t elsXmitLSRJT; uint32_t frameRcvBcast; uint32_t frameRcvMulti; uint32_t strayXmitCmpl; uint32_t frameXmitDelay; uint32_t xriCmdCmpl; uint32_t xriStatErr; uint32_t LinkUp; uint32_t LinkDown; uint32_t LinkMultiEvent; uint32_t NoRcvBuf; uint32_t fcpCmd; uint32_t fcpCmpl; uint32_t fcpRspErr; uint32_t fcpRemoteStop; uint32_t fcpPortRjt; uint32_t fcpPortBusy; uint32_t fcpError; uint32_t fcpLocalErr; }; enum sysfs_mbox_state { SMBOX_IDLE, SMBOX_WRITING, SMBOX_READING }; struct lpfc_sysfs_mbox { enum sysfs_mbox_state state; size_t offset; struct lpfcMboxq * mbox; }; struct lpfc_hba { struct lpfc_sli sli; struct lpfc_sli2_slim *slim2p; dma_addr_t slim2p_mapping; uint16_t pci_cfg_value; int32_t hba_state; #define LPFC_STATE_UNKNOWN 0 /* HBA state is unknown */ #define LPFC_WARM_START 1 /* HBA state after selective reset */ #define LPFC_INIT_START 2 /* Initial state after board reset */ #define LPFC_INIT_MBX_CMDS 3 /* Initialize HBA with mbox commands */ #define LPFC_LINK_DOWN 4 /* HBA initialized, link is down */ #define LPFC_LINK_UP 5 /* Link is up - issue READ_LA */ #define LPFC_LOCAL_CFG_LINK 6 /* local NPORT Id configured */ #define LPFC_FLOGI 7 /* FLOGI sent to Fabric */ #define LPFC_FABRIC_CFG_LINK 8 /* Fabric assigned NPORT Id configured */ #define LPFC_NS_REG 9 /* Register with NameServer */ #define LPFC_NS_QRY 10 /* Query NameServer for NPort ID list */ #define LPFC_BUILD_DISC_LIST 11 /* Build ADISC and PLOGI lists for * device authentication / discovery */ #define LPFC_DISC_AUTH 12 /* Processing ADISC list */ #define LPFC_CLEAR_LA 13 /* authentication cmplt - issue CLEAR_LA */ #define LPFC_HBA_READY 32 #define LPFC_HBA_ERROR -1 int32_t stopped; /* HBA has not been restarted since last ERATT */ uint8_t fc_linkspeed; /* Link speed after last READ_LA */ uint32_t fc_eventTag; /* event tag for link attention */ uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */ uint32_t num_disc_nodes; /*in addition to hba_state */ struct timer_list fc_estabtmo; /* link establishment timer */ struct timer_list fc_disctmo; /* Discovery rescue timer */ struct timer_list fc_fdmitmo; /* fdmi timer */ /* These fields used to be binfo */ struct lpfc_name fc_nodename; /* fc nodename */ struct lpfc_name fc_portname; /* fc portname */ uint32_t fc_pref_DID; /* preferred D_ID */ uint8_t fc_pref_ALPA; /* preferred AL_PA */ uint32_t fc_edtov; /* E_D_TOV timer value */ uint32_t fc_arbtov; /* ARB_TOV timer value */ uint32_t fc_ratov; /* R_A_TOV timer value */ uint32_t fc_rttov; /* R_T_TOV timer value */ uint32_t fc_altov; /* AL_TOV timer value */ uint32_t fc_crtov; /* C_R_TOV timer value */ uint32_t fc_citov; /* C_I_TOV timer value */ uint32_t fc_myDID; /* fibre channel S_ID */ uint32_t fc_prevDID; /* previous fibre channel S_ID */ struct serv_parm fc_sparam; /* buffer for our service parameters */ struct serv_parm fc_fabparam; /* fabric service parameters buffer */ uint8_t alpa_map[128]; /* AL_PA map from READ_LA */ uint8_t fc_ns_retry; /* retries for fabric nameserver */ uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */ uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */ struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN]; uint32_t lmt; uint32_t fc_flag; /* FC flags */ #define FC_PT2PT 0x1 /* pt2pt with no fabric */ #define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */ #define FC_DISC_TMO 0x4 /* Discovery timer running */ #define FC_PUBLIC_LOOP 0x8 /* Public loop */ #define FC_LBIT 0x10 /* LOGIN bit in loopinit set */ #define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */ #define FC_NLP_MORE 0x40 /* More node to process in node tbl */ #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */ #define FC_FABRIC 0x100 /* We are fabric attached */ #define FC_ESTABLISH_LINK 0x200 /* Reestablish Link */ #define FC_RSCN_DISCOVERY 0x400 /* Authenticate all devices after RSCN*/ #define FC_LOADING 0x1000 /* HBA in process of loading drvr */ #define FC_UNLOADING 0x2000 /* HBA in process of unloading drvr */ #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */ #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */ #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */ #define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */ uint32_t fc_topology; /* link topology, from LINK INIT */ struct lpfc_stats fc_stat; /* These are the head/tail pointers for the bind, plogi, adisc, unmap, * and map lists. Their counters are immediately following. */ struct list_head fc_plogi_list; struct list_head fc_adisc_list; struct list_head fc_reglogin_list; struct list_head fc_prli_list; struct list_head fc_nlpunmap_list; struct list_head fc_nlpmap_list; struct list_head fc_npr_list; struct list_head fc_unused_list; /* Keep counters for the number of entries in each list. */ uint16_t fc_plogi_cnt; uint16_t fc_adisc_cnt; uint16_t fc_reglogin_cnt; uint16_t fc_prli_cnt; uint16_t fc_unmap_cnt; uint16_t fc_map_cnt; uint16_t fc_npr_cnt; uint16_t fc_unused_cnt; struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */ uint32_t nport_event_cnt; /* timestamp for nlplist entry */ uint32_t wwnn[2]; uint32_t RandomData[7]; uint32_t cfg_log_verbose; uint32_t cfg_lun_queue_depth; uint32_t cfg_nodev_tmo; uint32_t cfg_hba_queue_depth; uint32_t cfg_fcp_class; uint32_t cfg_use_adisc; uint32_t cfg_ack0; uint32_t cfg_topology; uint32_t cfg_scan_down; uint32_t cfg_link_speed; uint32_t cfg_cr_delay; uint32_t cfg_cr_count; uint32_t cfg_multi_ring_support; uint32_t cfg_fdmi_on; uint32_t cfg_discovery_threads; uint32_t cfg_max_luns; uint32_t cfg_poll; uint32_t cfg_poll_tmo; uint32_t cfg_sg_seg_cnt; uint32_t cfg_sg_dma_buf_size; lpfc_vpd_t vpd; /* vital product data */ struct Scsi_Host *host; struct pci_dev *pcidev; struct list_head work_list; uint32_t work_ha; /* Host Attention Bits for WT */ uint32_t work_ha_mask; /* HA Bits owned by WT */ uint32_t work_hs; /* HS stored in case of ERRAT */ uint32_t work_status[2]; /* Extra status from SLIM */ uint32_t work_hba_events; /* Timeout to be handled */ #define WORKER_DISC_TMO 0x1 /* Discovery timeout */ #define WORKER_ELS_TMO 0x2 /* ELS timeout */ #define WORKER_MBOX_TMO 0x4 /* MBOX timeout */ #define WORKER_FDMI_TMO 0x8 /* FDMI timeout */ wait_queue_head_t *work_wait; struct task_struct *worker_thread; unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */ unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */ void __iomem *slim_memmap_p; /* Kernel memory mapped address for PCI BAR0 */ void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for PCI BAR2 */ void __iomem *MBslimaddr; /* virtual address for mbox cmds */ void __iomem *HAregaddr; /* virtual address for host attn reg */ void __iomem *CAregaddr; /* virtual address for chip attn reg */ void __iomem *HSregaddr; /* virtual address for host status reg */ void __iomem *HCregaddr; /* virtual address for host ctl reg */ int brd_no; /* FC board number */ char SerialNumber[32]; /* adapter Serial Number */ char OptionROMVersion[32]; /* adapter BIOS / Fcode version */ char ModelDesc[256]; /* Model Description */ char ModelName[80]; /* Model Name */ char ProgramType[256]; /* Program Type */ char Port[20]; /* Port No */ uint8_t vpd_flag; /* VPD data flag */ #define VPD_MODEL_DESC 0x1 /* valid vpd model description */ #define VPD_MODEL_NAME 0x2 /* valid vpd model name */ #define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */ #define VPD_PORT 0x8 /* valid vpd port data */ #define VPD_MASK 0xf /* mask for any vpd data */ struct timer_list fcp_poll_timer; struct timer_list els_tmofunc; /* * stat counters */ uint64_t fc4InputRequests; uint64_t fc4OutputRequests; uint64_t fc4ControlRequests; struct lpfc_sysfs_mbox sysfs_mbox; /* fastpath list. */ spinlock_t scsi_buf_list_lock; struct list_head lpfc_scsi_buf_list; uint32_t total_scsi_bufs; struct list_head lpfc_iocb_list; uint32_t total_iocbq_bufs; /* pci_mem_pools */ struct pci_pool *lpfc_scsi_dma_buf_pool; struct pci_pool *lpfc_mbuf_pool; struct lpfc_dma_pool lpfc_mbuf_safety_pool; mempool_t *mbox_mem_pool; mempool_t *nlp_mem_pool; struct list_head freebufList; struct list_head ctrspbuflist; struct list_head rnidrspbuflist; struct fc_host_statistics link_stats; }; struct rnidrsp { void *buf; uint32_t uniqueid; struct list_head list; uint32_t data; };