/* * drivers/net/ucc_geth_mii.c * * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation * Provides Bus interface for MII Management regs in the UCC register space * * Copyright (C) 2007 Freescale Semiconductor, Inc. * * Authors: Li Yang * Kim Phillips * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ucc_geth_mii.h" #include "ucc_geth.h" #define DEBUG #ifdef DEBUG #define vdbg(format, arg...) printk(KERN_DEBUG , format "\n" , ## arg) #else #define vdbg(format, arg...) do {} while(0) #endif #define DRV_DESC "QE UCC Ethernet Controller MII Bus" #define DRV_NAME "fsl-uec_mdio" /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ /* configuration has to be done through the master UEC MIIM regs */ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; /* Setting up the MII Mangement Address Register */ out_be32(®s->miimadd, (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); /* Setting up the MII Mangement Control Register with the value */ out_be32(®s->miimcon, value); /* Wait till MII management write is complete */ while ((in_be32(®s->miimind)) & MIIMIND_BUSY) cpu_relax(); return 0; } /* Reads from register regnum in the PHY for device dev, */ /* returning the value. Clears miimcom first. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; u16 value; /* Setting up the MII Mangement Address Register */ out_be32(®s->miimadd, (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); /* Clear miimcom, perform an MII management read cycle */ out_be32(®s->miimcom, 0); out_be32(®s->miimcom, MIIMCOM_READ_CYCLE); /* Wait till MII management write is complete */ while ((in_be32(®s->miimind)) & (MIIMIND_BUSY | MIIMIND_NOT_VALID)) cpu_relax(); /* Read MII management status */ value = in_be32(®s->miimstat); return value; } /* Reset the MIIM registers, and wait for the bus to free */ int uec_mdio_reset(struct mii_bus *bus) { struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; unsigned int timeout = PHY_INIT_TIMEOUT; spin_lock_bh(&bus->mdio_lock); /* Reset the management interface */ out_be32(®s->miimcfg, MIIMCFG_RESET_MANAGEMENT); /* Setup the MII Mgmt clock speed */ out_be32(®s->miimcfg, MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112); /* Wait until the bus is free */ while ((in_be32(®s->miimind) & MIIMIND_BUSY) && timeout--) cpu_relax(); spin_unlock_bh(&bus->mdio_lock); if (timeout <= 0) { printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name); return -EBUSY; } return 0; } static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *match) { struct device *device = &ofdev->dev; struct device_node *np = ofdev->node, *tempnp = NULL; struct device_node *child = NULL; struct ucc_mii_mng __iomem *regs; struct mii_bus *new_bus; struct resource res; int k, err = 0; new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); if (NULL == new_bus) return -ENOMEM; new_bus->name = "UCC Ethernet Controller MII Bus"; new_bus->read = &uec_mdio_read; new_bus->write = &uec_mdio_write; new_bus->reset = &uec_mdio_reset; memset(&res, 0, sizeof(res)); err = of_address_to_resource(np, 0, &res); if (err) goto reg_map_fail; new_bus->id = res.start; new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); if (NULL == new_bus->irq) { err = -ENOMEM; goto reg_map_fail; } for (k = 0; k < 32; k++) new_bus->irq[k] = PHY_POLL; while ((child = of_get_next_child(np, child)) != NULL) { int irq = irq_of_parse_and_map(child, 0); if (irq != NO_IRQ) { const u32 *id = of_get_property(child, "reg", NULL); new_bus->irq[*id] = irq; } } /* Set the base address */ regs = ioremap(res.start, sizeof(struct ucc_mii_mng)); if (NULL == regs) { err = -ENOMEM; goto ioremap_fail; } new_bus->priv = (void __force *)regs; new_bus->dev = device; dev_set_drvdata(device, new_bus); /* Read MII management master from device tree */ while ((tempnp = of_find_compatible_node(tempnp, "network", "ucc_geth")) != NULL) { struct resource tempres; err = of_address_to_resource(tempnp, 0, &tempres); if (err) goto bus_register_fail; /* if our mdio regs fall within this UCC regs range */ if ((res.start >= tempres.start) && (res.end <= tempres.end)) { /* set this UCC to be the MII master */ const u32 *id = of_get_property(tempnp, "device-id", NULL); if (id == NULL) goto bus_register_fail; ucc_set_qe_mux_mii_mng(*id - 1); /* assign the TBI an address which won't * conflict with the PHYs */ out_be32(®s->utbipar, UTBIPAR_INIT_TBIPA); break; } } err = mdiobus_register(new_bus); if (0 != err) { printk(KERN_ERR "%s: Cannot register as MDIO bus\n", new_bus->name); goto bus_register_fail; } return 0; bus_register_fail: iounmap(regs); ioremap_fail: kfree(new_bus->irq); reg_map_fail: kfree(new_bus); return err; } int uec_mdio_remove(struct of_device *ofdev) { struct device *device = &ofdev->dev; struct mii_bus *bus = dev_get_drvdata(device); mdiobus_unregister(bus); dev_set_drvdata(device, NULL); iounmap((void __iomem *)bus->priv); bus->priv = NULL; kfree(bus); return 0; } static struct of_device_id uec_mdio_match[] = { { .type = "mdio", .compatible = "ucc_geth_phy", }, {}, }; static struct of_platform_driver uec_mdio_driver = { .name = DRV_NAME, .probe = uec_mdio_probe, .remove = uec_mdio_remove, .match_table = uec_mdio_match, }; int __init uec_mdio_init(void) { return of_register_platform_driver(&uec_mdio_driver); } void __exit uec_mdio_exit(void) { of_unregister_platform_driver(&uec_mdio_driver); }