/* * pcic.c: MicroSPARC-IIep PCI controller support * * Copyright (C) 1998 V. Roganov and G. Raiko * * Code is derived from Ultra/PCI PSYCHO controller support, see that * for author info. * * Support for diverse IIep based platforms by Pete Zaitcev. * CP-1200 by Eric Brower. */ #include #include #include #include #include #include #include #include /* for sanity check... */ #include /* for cache flushing. */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* * I studied different documents and many live PROMs both from 2.30 * family and 3.xx versions. I came to the amazing conclusion: there is * absolutely no way to route interrupts in IIep systems relying on * information which PROM presents. We must hardcode interrupt routing * schematics. And this actually sucks. -- zaitcev 1999/05/12 * * To find irq for a device we determine which routing map * is in effect or, in other words, on which machine we are running. * We use PROM name for this although other techniques may be used * in special cases (Gleb reports a PROMless IIep based system). * Once we know the map we take device configuration address and * find PCIC pin number where INT line goes. Then we may either program * preferred irq into the PCIC or supply the preexisting irq to the device. */ struct pcic_ca2irq { unsigned char busno; /* PCI bus number */ unsigned char devfn; /* Configuration address */ unsigned char pin; /* PCIC external interrupt pin */ unsigned char irq; /* Preferred IRQ (mappable in PCIC) */ unsigned int force; /* Enforce preferred IRQ */ }; struct pcic_sn2list { char *sysname; struct pcic_ca2irq *intmap; int mapdim; }; /* * JavaEngine-1 apparently has different versions. * * According to communications with Sun folks, for P2 build 501-4628-03: * pin 0 - parallel, audio; * pin 1 - Ethernet; * pin 2 - su; * pin 3 - PS/2 kbd and mouse. * * OEM manual (805-1486): * pin 0: Ethernet * pin 1: All EBus * pin 2: IGA (unused) * pin 3: Not connected * OEM manual says that 501-4628 & 501-4811 are the same thing, * only the latter has NAND flash in place. * * So far unofficial Sun wins over the OEM manual. Poor OEMs... */ static struct pcic_ca2irq pcic_i_je1a[] = { /* 501-4811-03 */ { 0, 0x00, 2, 12, 0 }, /* EBus: hogs all */ { 0, 0x01, 1, 6, 1 }, /* Happy Meal */ { 0, 0x80, 0, 7, 0 }, /* IGA (unused) */ }; /* XXX JS-E entry is incomplete - PCI Slot 2 address (pin 7)? */ static struct pcic_ca2irq pcic_i_jse[] = { { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */ { 0, 0x01, 1, 6, 0 }, /* hme */ { 0, 0x08, 2, 9, 0 }, /* VGA - we hope not used :) */ { 0, 0x10, 6, 8, 0 }, /* PCI INTA# in Slot 1 */ { 0, 0x18, 7, 12, 0 }, /* PCI INTA# in Slot 2, shared w. RTC */ { 0, 0x38, 4, 9, 0 }, /* All ISA devices. Read 8259. */ { 0, 0x80, 5, 11, 0 }, /* EIDE */ /* {0,0x88, 0,0,0} - unknown device... PMU? Probably no interrupt. */ { 0, 0xA0, 4, 9, 0 }, /* USB */ /* * Some pins belong to non-PCI devices, we hardcode them in drivers. * sun4m timers - irq 10, 14 * PC style RTC - pin 7, irq 4 ? * Smart card, Parallel - pin 4 shared with USB, ISA * audio - pin 3, irq 5 ? */ }; /* SPARCengine-6 was the original release name of CP1200. * The documentation differs between the two versions */ static struct pcic_ca2irq pcic_i_se6[] = { { 0, 0x08, 0, 2, 0 }, /* SCSI */ { 0, 0x01, 1, 6, 0 }, /* HME */ { 0, 0x00, 3, 13, 0 }, /* EBus */ }; /* * Krups (courtesy of Varol Kaptan) * No documentation available, but it was easy to guess * because it was very similar to Espresso. * * pin 0 - kbd, mouse, serial; * pin 1 - Ethernet; * pin 2 - igs (we do not use it); * pin 3 - audio; * pin 4,5,6 - unused; * pin 7 - RTC (from P2 onwards as David B. says). */ static struct pcic_ca2irq pcic_i_jk[] = { { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */ { 0, 0x01, 1, 6, 0 }, /* hme */ }; /* * Several entries in this list may point to the same routing map * as several PROMs may be installed on the same physical board. */ #define SN2L_INIT(name, map) \ { name, map, ARRAY_SIZE(map) } static struct pcic_sn2list pcic_known_sysnames[] = { SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */ SN2L_INIT("SUNW,JS-E", pcic_i_jse), /* PROLL JavaStation-E */ SN2L_INIT("SUNW,SPARCengine-6", pcic_i_se6), /* SPARCengine-6/CP-1200 */ SN2L_INIT("SUNW,JS-NC", pcic_i_jk), /* PROLL JavaStation-NC */ SN2L_INIT("SUNW,JSIIep", pcic_i_jk), /* OBP JavaStation-NC */ { NULL, NULL, 0 } }; /* * Only one PCIC per IIep, * and since we have no SMP IIep, only one per system. */ static int pcic0_up; static struct linux_pcic pcic0; void __iomem *pcic_regs; volatile int pcic_speculative; volatile int pcic_trapped; static void pci_do_gettimeofday(struct timeval *tv); static int pci_do_settimeofday(struct timespec *tv); #define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3)) static int pcic_read_config_dword(unsigned int busno, unsigned int devfn, int where, u32 *value) { struct linux_pcic *pcic; unsigned long flags; pcic = &pcic0; local_irq_save(flags); #if 0 /* does not fail here */ pcic_speculative = 1; pcic_trapped = 0; #endif writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr); #if 0 /* does not fail here */ nop(); if (pcic_trapped) { local_irq_restore(flags); *value = ~0; return 0; } #endif pcic_speculative = 2; pcic_trapped = 0; *value = readl(pcic->pcic_config_space_data + (where&4)); nop(); if (pcic_trapped) { pcic_speculative = 0; local_irq_restore(flags); *value = ~0; return 0; } pcic_speculative = 0; local_irq_restore(flags); return 0; } static int pcic_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { unsigned int v; if (bus->number != 0) return -EINVAL; switch (size) { case 1: pcic_read_config_dword(bus->number, devfn, where&~3, &v); *val = 0xff & (v >> (8*(where & 3))); return 0; case 2: if (where&1) return -EINVAL; pcic_read_config_dword(bus->number, devfn, where&~3, &v); *val = 0xffff & (v >> (8*(where & 3))); return 0; case 4: if (where&3) return -EINVAL; pcic_read_config_dword(bus->number, devfn, where&~3, val); return 0; } return -EINVAL; } static int pcic_write_config_dword(unsigned int busno, unsigned int devfn, int where, u32 value) { struct linux_pcic *pcic; unsigned long flags; pcic = &pcic0; local_irq_save(flags); writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr); writel(value, pcic->pcic_config_space_data + (where&4)); local_irq_restore(flags); return 0; } static int pcic_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { unsigned int v; if (bus->number != 0) return -EINVAL; switch (size) { case 1: pcic_read_config_dword(bus->number, devfn, where&~3, &v); v = (v & ~(0xff << (8*(where&3)))) | ((0xff&val) << (8*(where&3))); return pcic_write_config_dword(bus->number, devfn, where&~3, v); case 2: if (where&1) return -EINVAL; pcic_read_config_dword(bus->number, devfn, where&~3, &v); v = (v & ~(0xffff << (8*(where&3)))) | ((0xffff&val) << (8*(where&3))); return pcic_write_config_dword(bus->number, devfn, where&~3, v); case 4: if (where&3) return -EINVAL; return pcic_write_config_dword(bus->number, devfn, where, val); } return -EINVAL; } static struct pci_ops pcic_ops = { .read = pcic_read_config, .write = pcic_write_config, }; /* * On sparc64 pcibios_init() calls pci_controller_probe(). * We want PCIC probed little ahead so that interrupt controller * would be operational. */ int __init pcic_probe(void) { struct linux_pcic *pcic; struct linux_prom_registers regs[PROMREG_MAX]; struct linux_pbm_info* pbm; char namebuf[64]; int node; int err; if (pcic0_up) { prom_printf("PCIC: called twice!\n"); prom_halt(); } pcic = &pcic0; node = prom_getchild (prom_root_node); node = prom_searchsiblings (node, "pci"); if (node == 0) return -ENODEV; /* * Map in PCIC register set, config space, and IO base */ err = prom_getproperty(node, "reg", (char*)regs, sizeof(regs)); if (err == 0 || err == -1) { prom_printf("PCIC: Error, cannot get PCIC registers " "from PROM.\n"); prom_halt(); } pcic0_up = 1; pcic->pcic_res_regs.name = "pcic_registers"; pcic->pcic_regs = ioremap(regs[0].phys_addr, regs[0].reg_size); if (!pcic->pcic_regs) { prom_printf("PCIC: Error, cannot map PCIC registers.\n"); prom_halt(); } pcic->pcic_res_io.name = "pcic_io"; if ((pcic->pcic_io = (unsigned long) ioremap(regs[1].phys_addr, 0x10000)) == 0) { prom_printf("PCIC: Error, cannot map PCIC IO Base.\n"); prom_halt(); } pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr"; if ((pcic->pcic_config_space_addr = ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) { prom_printf("PCIC: Error, cannot map" "PCI Configuration Space Address.\n"); prom_halt(); } /* * Docs say three least significant bits in address and data * must be the same. Thus, we need adjust size of data. */ pcic->pcic_res_cfg_data.name = "pcic_cfg_data"; if ((pcic->pcic_config_space_data = ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) { prom_printf("PCIC: Error, cannot map" "PCI Configuration Space Data.\n"); prom_halt(); } pbm = &pcic->pbm; pbm->prom_node = node; prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0; strcpy(pbm->prom_name, namebuf); { extern volatile int t_nmi[1]; extern int pcic_nmi_trap_patch[1]; t_nmi[0] = pcic_nmi_trap_patch[0]; t_nmi[1] = pcic_nmi_trap_patch[1]; t_nmi[2] = pcic_nmi_trap_patch[2]; t_nmi[3] = pcic_nmi_trap_patch[3]; swift_flush_dcache(); pcic_regs = pcic->pcic_regs; } prom_getstring(prom_root_node, "name", namebuf, 63); namebuf[63] = 0; { struct pcic_sn2list *p; for (p = pcic_known_sysnames; p->sysname != NULL; p++) { if (strcmp(namebuf, p->sysname) == 0) break; } pcic->pcic_imap = p->intmap; pcic->pcic_imdim = p->mapdim; } if (pcic->pcic_imap == NULL) { /* * We do not panic here for the sake of embedded systems. */ printk("PCIC: System %s is unknown, cannot route interrupts\n", namebuf); } return 0; } static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic) { struct linux_pbm_info *pbm = &pcic->pbm; pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, &pcic_ops, pbm); #if 0 /* deadwood transplanted from sparc64 */ pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node); pci_record_assignments(pbm, pbm->pci_bus); pci_assign_unassigned(pbm, pbm->pci_bus); pci_fixup_irq(pbm, pbm->pci_bus); #endif } /* * Main entry point from the PCI subsystem. */ static int __init pcic_init(void) { struct linux_pcic *pcic; /* * PCIC should be initialized at start of the timer. * So, here we report the presence of PCIC and do some magic passes. */ if(!pcic0_up) return 0; pcic = &pcic0; /* * Switch off IOTLB translation. */ writeb(PCI_DVMA_CONTROL_IOTLB_DISABLE, pcic->pcic_regs+PCI_DVMA_CONTROL); /* * Increase mapped size for PCI memory space (DMA access). * Should be done in that order (size first, address second). * Why we couldn't set up 4GB and forget about it? XXX */ writel(0xF0000000UL, pcic->pcic_regs+PCI_SIZE_0); writel(0+PCI_BASE_ADDRESS_SPACE_MEMORY, pcic->pcic_regs+PCI_BASE_ADDRESS_0); pcic_pbm_scan_bus(pcic); ebus_init(); return 0; } int pcic_present(void) { return pcic0_up; } static int __init pdev_to_pnode(struct linux_pbm_info *pbm, struct pci_dev *pdev) { struct linux_prom_pci_registers regs[PROMREG_MAX]; int err; int node = prom_getchild(pbm->prom_node); while(node) { err = prom_getproperty(node, "reg", (char *)®s[0], sizeof(regs)); if(err != 0 && err != -1) { unsigned long devfn = (regs[0].which_io >> 8) & 0xff; if(devfn == pdev->devfn) return node; } node = prom_getsibling(node); } return 0; } static inline struct pcidev_cookie *pci_devcookie_alloc(void) { return kmalloc(sizeof(struct pcidev_cookie), GFP_ATOMIC); } static void pcic_map_pci_device(struct linux_pcic *pcic, struct pci_dev *dev, int node) { char namebuf[64]; unsigned long address; unsigned long flags; int j; if (node == 0 || node == -1) { strcpy(namebuf, "???"); } else { prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0; } for (j = 0; j < 6; j++) { address = dev->resource[j].start; if (address == 0) break; /* are sequential */ flags = dev->resource[j].flags; if ((flags & IORESOURCE_IO) != 0) { if (address < 0x10000) { /* * A device responds to I/O cycles on PCI. * We generate these cycles with memory * access into the fixed map (phys 0x30000000). * * Since a device driver does not want to * do ioremap() before accessing PC-style I/O, * we supply virtual, ready to access address. * * Ebus devices do not come here even if * CheerIO makes a similar conversion. * See ebus.c for details. * * Note that request_region() * works for these devices. * * XXX Neat trick, but it's a *bad* idea * to shit into regions like that. * What if we want to allocate one more * PCI base address... */ dev->resource[j].start = pcic->pcic_io + address; dev->resource[j].end = 1; /* XXX */ dev->resource[j].flags = (flags & ~IORESOURCE_IO) | IORESOURCE_MEM; } else { /* * OOPS... PCI Spec allows this. Sun does * not have any devices getting above 64K * so it must be user with a weird I/O * board in a PCI slot. We must remap it * under 64K but it is not done yet. XXX */ printk("PCIC: Skipping I/O space at 0x%lx," "this will Oops if a driver attaches;" "device '%s' at %02x:%02x)\n", address, namebuf, dev->bus->number, dev->devfn); } } } } static void pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) { struct pcic_ca2irq *p; int i, ivec; char namebuf[64]; if (node == 0 || node == -1) { strcpy(namebuf, "???"); } else { prom_getstring(node, "name", namebuf, sizeof(namebuf)); } if ((p = pcic->pcic_imap) == 0) { dev->irq = 0; return; } for (i = 0; i < pcic->pcic_imdim; i++) { if (p->busno == dev->bus->number && p->devfn == dev->devfn) break; p++; } if (i >= pcic->pcic_imdim) { printk("PCIC: device %s devfn %02x:%02x not found in %d\n", namebuf, dev->bus->number, dev->devfn, pcic->pcic_imdim); dev->irq = 0; return; } i = p->pin; if (i >= 0 && i < 4) { ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); dev->irq = ivec >> (i << 2) & 0xF; } else if (i >= 4 && i < 8) { ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); dev->irq = ivec >> ((i-4) << 2) & 0xF; } else { /* Corrupted map */ printk("PCIC: BAD PIN %d\n", i); for (;;) {} } /* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */ /* * dev->irq=0 means PROM did not bother to program the upper * half of PCIC. This happens on JS-E with PROM 3.11, for instance. */ if (dev->irq == 0 || p->force) { if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */ printk("PCIC: BAD IRQ %d\n", p->irq); for (;;) {} } printk("PCIC: setting irq %d at pin %d for device %02x:%02x\n", p->irq, p->pin, dev->bus->number, dev->devfn); dev->irq = p->irq; i = p->pin; if (i >= 4) { ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); ivec &= ~(0xF << ((i - 4) << 2)); ivec |= p->irq << ((i - 4) << 2); writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_HI); } else { ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); ivec &= ~(0xF << (i << 2)); ivec |= p->irq << (i << 2); writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO); } } return; } /* * Normally called from {do_}pci_scan_bus... */ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev; int i, has_io, has_mem; unsigned int cmd; struct linux_pcic *pcic; /* struct linux_pbm_info* pbm = &pcic->pbm; */ int node; struct pcidev_cookie *pcp; if (!pcic0_up) { printk("pcibios_fixup_bus: no PCIC\n"); return; } pcic = &pcic0; /* * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus); */ if (bus->number != 0) { printk("pcibios_fixup_bus: nonzero bus 0x%x\n", bus->number); return; } list_for_each_entry(dev, &bus->devices, bus_list) { /* * Comment from i386 branch: * There are buggy BIOSes that forget to enable I/O and memory * access to PCI devices. We try to fix this, but we need to * be sure that the BIOS didn't forget to assign an address * to the device. [mj] * OBP is a case of such BIOS :-) */ has_io = has_mem = 0; for(i=0; i<6; i++) { unsigned long f = dev->resource[i].flags; if (f & IORESOURCE_IO) { has_io = 1; } else if (f & IORESOURCE_MEM) has_mem = 1; } pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); if (has_io && !(cmd & PCI_COMMAND_IO)) { printk("PCIC: Enabling I/O for device %02x:%02x\n", dev->bus->number, dev->devfn); cmd |= PCI_COMMAND_IO; pcic_write_config(dev->bus, dev->devfn, PCI_COMMAND, 2, cmd); } if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) { printk("PCIC: Enabling memory for device %02x:%02x\n", dev->bus->number, dev->devfn); cmd |= PCI_COMMAND_MEMORY; pcic_write_config(dev->bus, dev->devfn, PCI_COMMAND, 2, cmd); } node = pdev_to_pnode(&pcic->pbm, dev); if(node == 0) node = -1; /* cookies */ pcp = pci_devcookie_alloc(); pcp->pbm = &pcic->pbm; pcp->prom_node = of_find_node_by_phandle(node); dev->sysdata = pcp; /* fixing I/O to look like memory */ if ((dev->class>>16) != PCI_BASE_CLASS_BRIDGE) pcic_map_pci_device(pcic, dev, node); pcic_fill_irq(pcic, dev, node); } } /* * pcic_pin_to_irq() is exported to ebus.c. */ unsigned int pcic_pin_to_irq(unsigned int pin, const char *name) { struct linux_pcic *pcic = &pcic0; unsigned int irq; unsigned int ivec; if (pin < 4) { ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); irq = ivec >> (pin << 2) & 0xF; } else if (pin < 8) { ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); irq = ivec >> ((pin-4) << 2) & 0xF; } else { /* Corrupted map */ printk("PCIC: BAD PIN %d FOR %s\n", pin, name); for (;;) {} /* XXX Cannot panic properly in case of PROLL */ } /* P3 */ /* printk("PCIC: dev %s pin %d ivec 0x%x irq %x\n", name, pin, ivec, irq); */ return irq; } /* Makes compiler happy */ static volatile int pcic_timer_dummy; static void pcic_clear_clock_irq(void) { pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT); } static irqreturn_t pcic_timer_handler (int irq, void *h) { write_seqlock(&xtime_lock); /* Dummy, to show that we remember */ pcic_clear_clock_irq(); do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif write_sequnlock(&xtime_lock); return IRQ_HANDLED; } #define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */ #define TICK_TIMER_LIMIT ((100*1000000/4)/100) void __init pci_time_init(void) { struct linux_pcic *pcic = &pcic0; unsigned long v; int timer_irq, irq; /* A hack until do_gettimeofday prototype is moved to arch specific headers and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */ ((unsigned int *)do_gettimeofday)[0] = 0x10800000 | ((((unsigned long)pci_do_gettimeofday - (unsigned long)do_gettimeofday) >> 2) & 0x003fffff); ((unsigned int *)do_gettimeofday)[1] = 0x01000000; BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM); btfixup(); writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT); /* PROM should set appropriate irq */ v = readb(pcic->pcic_regs+PCI_COUNTER_IRQ); timer_irq = PCI_COUNTER_IRQ_SYS(v); writel (PCI_COUNTER_IRQ_SET(timer_irq, 0), pcic->pcic_regs+PCI_COUNTER_IRQ); irq = request_irq(timer_irq, pcic_timer_handler, (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); if (irq) { prom_printf("time_init: unable to attach IRQ%d\n", timer_irq); prom_halt(); } local_irq_enable(); } static __inline__ unsigned long do_gettimeoffset(void) { /* * We divide all by 100 * to have microsecond resolution and to avoid overflow */ unsigned long count = readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW; count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100); return count; } static void pci_do_gettimeofday(struct timeval *tv) { unsigned long flags; unsigned long seq; unsigned long usec, sec; unsigned long max_ntp_tick = tick_usec - tickadj; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = do_gettimeoffset(); /* * If time_adjust is negative then NTP is slowing the clock * so make sure not to go into next possible interval. * Better to lose some accuracy than have time go backwards.. */ if (unlikely(time_adjust < 0)) usec = min(usec, max_ntp_tick); sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); while (usec >= 1000000) { usec -= 1000000; sec++; } tv->tv_sec = sec; tv->tv_usec = usec; } static int pci_do_settimeofday(struct timespec *tv) { if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) return -EINVAL; /* * This is revolting. We need to set "xtime" correctly. However, the * value in this location is the value at the most recent update of * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ tv->tv_nsec -= 1000 * do_gettimeoffset(); while (tv->tv_nsec < 0) { tv->tv_nsec += NSEC_PER_SEC; tv->tv_sec--; } wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec; wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec; if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) { wall_to_monotonic.tv_nsec -= NSEC_PER_SEC; wall_to_monotonic.tv_sec++; } if (wall_to_monotonic.tv_nsec < 0) { wall_to_monotonic.tv_nsec += NSEC_PER_SEC; wall_to_monotonic.tv_sec--; } xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; ntp_clear(); return 0; } #if 0 static void watchdog_reset() { writeb(0, pcic->pcic_regs+PCI_SYS_STATUS); } #endif /* * Other archs parse arguments here. */ char * __devinit pcibios_setup(char *str) { return str; } void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { } int pcibios_enable_device(struct pci_dev *pdev, int mask) { return 0; } /* * NMI */ void pcic_nmi(unsigned int pend, struct pt_regs *regs) { pend = flip_dword(pend); if (!pcic_speculative || (pend & PCI_SYS_INT_PENDING_PIO) == 0) { /* * XXX On CP-1200 PCI #SERR may happen, we do not know * what to do about it yet. */ printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n", pend, (int)regs->pc, pcic_speculative); for (;;) { } } pcic_speculative = 0; pcic_trapped = 1; regs->pc = regs->npc; regs->npc += 4; } static inline unsigned long get_irqmask(int irq_nr) { return 1 << irq_nr; } static void pcic_disable_irq(unsigned int irq_nr) { unsigned long mask, flags; mask = get_irqmask(irq_nr); local_irq_save(flags); writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET); local_irq_restore(flags); } static void pcic_enable_irq(unsigned int irq_nr) { unsigned long mask, flags; mask = get_irqmask(irq_nr); local_irq_save(flags); writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR); local_irq_restore(flags); } static void pcic_clear_profile_irq(int cpu) { printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); } static void pcic_load_profile_irq(int cpu, unsigned int limit) { printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); } /* We assume the caller has disabled local interrupts when these are called, * or else very bizarre behavior will result. */ static void pcic_disable_pil_irq(unsigned int pil) { writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET); } static void pcic_enable_pil_irq(unsigned int pil) { writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR); } void __init sun4m_pci_init_IRQ(void) { BTFIXUPSET_CALL(enable_irq, pcic_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, pcic_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM); } int pcibios_assign_resource(struct pci_dev *pdev, int resource) { return -ENXIO; } struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) { struct pcidev_cookie *pc = pdev->sysdata; return pc->prom_node; } EXPORT_SYMBOL(pci_device_to_OF_node); /* * This probably belongs here rather than ioport.c because * we do not want this crud linked into SBus kernels. * Also, think for a moment about likes of floppy.c that * include architecture specific parts. They may want to redefine ins/outs. * * We do not use horrible macros here because we want to * advance pointer by sizeof(size). */ void outsb(unsigned long addr, const void *src, unsigned long count) { while (count) { count -= 1; outb(*(const char *)src, addr); src += 1; /* addr += 1; */ } } void outsw(unsigned long addr, const void *src, unsigned long count) { while (count) { count -= 2; outw(*(const short *)src, addr); src += 2; /* addr += 2; */ } } void outsl(unsigned long addr, const void *src, unsigned long count) { while (count) { count -= 4; outl(*(const long *)src, addr); src += 4; /* addr += 4; */ } } void insb(unsigned long addr, void *dst, unsigned long count) { while (count) { count -= 1; *(unsigned char *)dst = inb(addr); dst += 1; /* addr += 1; */ } } void insw(unsigned long addr, void *dst, unsigned long count) { while (count) { count -= 2; *(unsigned short *)dst = inw(addr); dst += 2; /* addr += 2; */ } } void insl(unsigned long addr, void *dst, unsigned long count) { while (count) { count -= 4; /* * XXX I am sure we are in for an unaligned trap here. */ *(unsigned long *)dst = inl(addr); dst += 4; /* addr += 4; */ } } subsys_initcall(pcic_init);