/* * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) * * Support for PReP (Motorola MTX/MVME) * by Troy Benjegerdes (hozer@drgw.net) */ /* * bootup setup stuff.. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* prep registers for L2 */ #define CACHECRBA 0x80000823 /* Cache configuration register address */ #define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ #define L2CACHE_512KB 0x00 /* 512KB */ #define L2CACHE_256KB 0x01 /* 256KB */ #define L2CACHE_1MB 0x02 /* 1MB */ #define L2CACHE_NONE 0x03 /* NONE */ #define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ TODC_ALLOC(); extern unsigned char prep_nvram_read_val(int addr); extern void prep_nvram_write_val(int addr, unsigned char val); extern unsigned char rs_nvram_read_val(int addr); extern void rs_nvram_write_val(int addr, unsigned char val); extern void ibm_prep_init(void); extern void prep_find_bridges(void); int _prep_type; extern void prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi); extern void prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi); extern void prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi); extern void prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi); extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi); #define cached_21 (((char *)(ppc_cached_irq_mask))[3]) #define cached_A1 (((char *)(ppc_cached_irq_mask))[2]) #ifdef CONFIG_SOUND_CS4232 long ppc_cs4232_dma, ppc_cs4232_dma2; #endif extern PTE *Hash, *Hash_end; extern unsigned long Hash_size, Hash_mask; extern int probingmem; extern unsigned long loops_per_jiffy; #ifdef CONFIG_SOUND_CS4232 EXPORT_SYMBOL(ppc_cs4232_dma); EXPORT_SYMBOL(ppc_cs4232_dma2); #endif /* useful ISA ports */ #define PREP_SYSCTL 0x81c /* present in the IBM reference design; possibly identical in Mot boxes: */ #define PREP_IBM_SIMM_ID 0x803 /* SIMM size: 32 or 8 MiB */ #define PREP_IBM_SIMM_PRESENCE 0x804 #define PREP_IBM_EQUIPMENT 0x80c #define PREP_IBM_L2INFO 0x80d #define PREP_IBM_PM1 0x82a /* power management register 1 */ #define PREP_IBM_PLANAR 0x852 /* planar ID - identifies the motherboard */ #define PREP_IBM_DISP 0x8c0 /* 4-digit LED display */ /* Equipment Present Register masks: */ #define PREP_IBM_EQUIPMENT_RESERVED 0x80 #define PREP_IBM_EQUIPMENT_SCSIFUSE 0x40 #define PREP_IBM_EQUIPMENT_L2_COPYBACK 0x08 #define PREP_IBM_EQUIPMENT_L2_256 0x04 #define PREP_IBM_EQUIPMENT_CPU 0x02 #define PREP_IBM_EQUIPMENT_L2 0x01 /* planar ID values: */ /* Sandalfoot/Sandalbow (6015/7020) */ #define PREP_IBM_SANDALFOOT 0xfc /* Woodfield, Thinkpad 850/860 (6042/7249) */ #define PREP_IBM_THINKPAD 0xff /* planar ID unimplemented */ /* PowerSeries 830/850 (6050/6070) */ #define PREP_IBM_CAROLINA_IDE_0 0xf0 #define PREP_IBM_CAROLINA_IDE_1 0xf1 #define PREP_IBM_CAROLINA_IDE_2 0xf2 #define PREP_IBM_CAROLINA_IDE_3 0xf3 /* 7248-43P */ #define PREP_IBM_CAROLINA_SCSI_0 0xf4 #define PREP_IBM_CAROLINA_SCSI_1 0xf5 #define PREP_IBM_CAROLINA_SCSI_2 0xf6 #define PREP_IBM_CAROLINA_SCSI_3 0xf7 /* missing from Carolina Tech Spec */ /* Tiger1 (7043-140) */ #define PREP_IBM_TIGER1_133 0xd1 #define PREP_IBM_TIGER1_166 0xd2 #define PREP_IBM_TIGER1_180 0xd3 #define PREP_IBM_TIGER1_xxx 0xd4 /* unknown, but probably exists */ #define PREP_IBM_TIGER1_333 0xd5 /* missing from Tiger Tech Spec */ /* setup_ibm_pci: * set Motherboard_map_name, Motherboard_map, Motherboard_routes. * return 8259 edge/level masks. */ void (*setup_ibm_pci)(char *irq_lo, char *irq_hi); extern char *Motherboard_map_name; /* for use in *_cpuinfo */ /* * As found in the PReP reference implementation. * Used by Thinkpad, Sandalfoot (6015/7020), and all Motorola PReP. */ static void __init prep_gen_enable_l2(void) { outb(inb(PREP_SYSCTL) | 0x3, PREP_SYSCTL); } /* Used by Carolina and Tiger1 */ static void __init prep_carolina_enable_l2(void) { outb(inb(PREP_SYSCTL) | 0xc0, PREP_SYSCTL); } /* cpuinfo code common to all IBM PReP */ static void prep_ibm_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name); seq_printf(m, "upgrade cpu\t: "); if (equip_reg & PREP_IBM_EQUIPMENT_CPU) { seq_printf(m, "not "); } seq_printf(m, "present\n"); /* print info about the SCSI fuse */ seq_printf(m, "scsi fuse\t: "); if (equip_reg & PREP_IBM_EQUIPMENT_SCSIFUSE) seq_printf(m, "ok"); else seq_printf(m, "bad"); seq_printf(m, "\n"); /* print info about SIMMs */ if (have_residual_data) { int i; seq_printf(m, "simms\t\t: "); for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) { if (res->Memories[i].SIMMSize != 0) seq_printf(m, "%d:%ldMiB ", i, (res->Memories[i].SIMMSize > 1024) ? res->Memories[i].SIMMSize>>20 : res->Memories[i].SIMMSize); } seq_printf(m, "\n"); } } static int prep_gen_cpuinfo(struct seq_file *m) { prep_ibm_cpuinfo(m); return 0; } static int prep_sandalfoot_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); prep_ibm_cpuinfo(m); /* report amount and type of L2 cache present */ seq_printf(m, "L2 cache\t: "); if (equip_reg & PREP_IBM_EQUIPMENT_L2) { seq_printf(m, "not present"); } else { if (equip_reg & PREP_IBM_EQUIPMENT_L2_256) seq_printf(m, "256KiB"); else seq_printf(m, "unknown size"); if (equip_reg & PREP_IBM_EQUIPMENT_L2_COPYBACK) seq_printf(m, ", copy-back"); else seq_printf(m, ", write-through"); } seq_printf(m, "\n"); return 0; } static int prep_thinkpad_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); char *cpubus_speed, *pci_speed; prep_ibm_cpuinfo(m); /* report amount and type of L2 cache present */ seq_printf(m, "l2 cache\t: "); if ((equip_reg & 0x1) == 0) { switch ((equip_reg & 0xc) >> 2) { case 0x0: seq_printf(m, "128KiB look-aside 2-way write-through\n"); break; case 0x1: seq_printf(m, "512KiB look-aside direct-mapped write-back\n"); break; case 0x2: seq_printf(m, "256KiB look-aside 2-way write-through\n"); break; case 0x3: seq_printf(m, "256KiB look-aside direct-mapped write-back\n"); break; } } else { seq_printf(m, "not present\n"); } /* report bus speeds because we can */ if ((equip_reg & 0x80) == 0) { switch ((equip_reg & 0x30) >> 4) { case 0x1: cpubus_speed = "50"; pci_speed = "25"; break; case 0x3: cpubus_speed = "66"; pci_speed = "33"; break; default: cpubus_speed = "unknown"; pci_speed = "unknown"; break; } } else { switch ((equip_reg & 0x30) >> 4) { case 0x1: cpubus_speed = "25"; pci_speed = "25"; break; case 0x2: cpubus_speed = "60"; pci_speed = "30"; break; case 0x3: cpubus_speed = "33"; pci_speed = "33"; break; default: cpubus_speed = "unknown"; pci_speed = "unknown"; break; } } seq_printf(m, "60x bus\t\t: %sMHz\n", cpubus_speed); seq_printf(m, "pci bus\t\t: %sMHz\n", pci_speed); return 0; } static int prep_carolina_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); prep_ibm_cpuinfo(m); /* report amount and type of L2 cache present */ seq_printf(m, "l2 cache\t: "); if ((equip_reg & 0x1) == 0) { unsigned int l2_reg = inb(PREP_IBM_L2INFO); /* L2 size */ if ((l2_reg & 0x60) == 0) seq_printf(m, "256KiB"); else if ((l2_reg & 0x60) == 0x20) seq_printf(m, "512KiB"); else seq_printf(m, "unknown size"); /* L2 type */ if ((l2_reg & 0x3) == 0) seq_printf(m, ", async"); else if ((l2_reg & 0x3) == 1) seq_printf(m, ", sync"); else seq_printf(m, ", unknown type"); seq_printf(m, "\n"); } else { seq_printf(m, "not present\n"); } return 0; } static int prep_tiger1_cpuinfo(struct seq_file *m) { unsigned int l2_reg = inb(PREP_IBM_L2INFO); prep_ibm_cpuinfo(m); /* report amount and type of L2 cache present */ seq_printf(m, "l2 cache\t: "); if ((l2_reg & 0xf) == 0xf) { seq_printf(m, "not present\n"); } else { if (l2_reg & 0x8) seq_printf(m, "async, "); else seq_printf(m, "sync burst, "); if (l2_reg & 0x4) seq_printf(m, "parity, "); else seq_printf(m, "no parity, "); switch (l2_reg & 0x3) { case 0x0: seq_printf(m, "256KiB\n"); break; case 0x1: seq_printf(m, "512KiB\n"); break; case 0x2: seq_printf(m, "1MiB\n"); break; default: seq_printf(m, "unknown size\n"); break; } } return 0; } /* Used by all Motorola PReP */ static int prep_mot_cpuinfo(struct seq_file *m) { unsigned int cachew = *((unsigned char *)CACHECRBA); seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name); /* report amount and type of L2 cache present */ seq_printf(m, "l2 cache\t: "); switch (cachew & L2CACHE_MASK) { case L2CACHE_512KB: seq_printf(m, "512KiB"); break; case L2CACHE_256KB: seq_printf(m, "256KiB"); break; case L2CACHE_1MB: seq_printf(m, "1MiB"); break; case L2CACHE_NONE: seq_printf(m, "none\n"); goto no_l2; break; default: seq_printf(m, "%x\n", cachew); } seq_printf(m, ", parity %s", (cachew & L2CACHE_PARITY)? "enabled" : "disabled"); seq_printf(m, " SRAM:"); switch ( ((cachew & 0xf0) >> 4) & ~(0x3) ) { case 1: seq_printf(m, "synchronous, parity, flow-through\n"); break; case 2: seq_printf(m, "asynchronous, no parity\n"); break; case 3: seq_printf(m, "asynchronous, parity\n"); break; default:seq_printf(m, "synchronous, pipelined, no parity\n"); break; } no_l2: /* print info about SIMMs */ if (have_residual_data) { int i; seq_printf(m, "simms\t\t: "); for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) { if (res->Memories[i].SIMMSize != 0) seq_printf(m, "%d:%ldM ", i, (res->Memories[i].SIMMSize > 1024) ? res->Memories[i].SIMMSize>>20 : res->Memories[i].SIMMSize); } seq_printf(m, "\n"); } return 0; } static void prep_restart(char *cmd) { #define PREP_SP92 0x92 /* Special Port 92 */ local_irq_disable(); /* no interrupts */ /* set exception prefix high - to the prom */ _nmask_and_or_msr(0, MSR_IP); /* make sure bit 0 (reset) is a 0 */ outb( inb(PREP_SP92) & ~1L , PREP_SP92); /* signal a reset to system control port A - soft reset */ outb( inb(PREP_SP92) | 1 , PREP_SP92); while ( 1 ) ; /* not reached */ #undef PREP_SP92 } static void prep_halt(void) { local_irq_disable(); /* no interrupts */ /* set exception prefix high - to the prom */ _nmask_and_or_msr(0, MSR_IP); while ( 1 ) ; /* not reached */ } /* Carrera is the power manager in the Thinkpads. Unfortunately not much is * known about it, so we can't power down. */ static void prep_carrera_poweroff(void) { prep_halt(); } /* * On most IBM PReP's, power management is handled by a Signetics 87c750 * behind the Utah component on the ISA bus. To access the 750 you must write * a series of nibbles to port 0x82a (decoded by the Utah). This is described * somewhat in the IBM Carolina Technical Specification. * -Hollis */ static void utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value) { /* * byte1: 0 0 0 1 0 d a5 a4 * byte2: 0 0 0 1 a3 a2 a1 a0 * * d = the bit's value, enabled or disabled * (a5 a4 a3) = the byte number, minus 20 * (a2 a1 a0) = the bit number * * example: set the 5th bit of byte 21 (21.5) * a5 a4 a3 = 001 (byte 1) * a2 a1 a0 = 101 (bit 5) * * byte1 = 0001 0100 (0x14) * byte2 = 0001 1101 (0x1d) */ unsigned char byte1=0x10, byte2=0x10; /* the 750's '20.0' is accessed as '0.0' through Utah (which adds 20) */ bytenum -= 20; byte1 |= (!!value) << 2; /* set d */ byte1 |= (bytenum >> 1) & 0x3; /* set a5, a4 */ byte2 |= (bytenum & 0x1) << 3; /* set a3 */ byte2 |= bitnum & 0x7; /* set a2, a1, a0 */ outb(byte1, PREP_IBM_PM1); /* first nibble */ mb(); udelay(100); /* important: let controller recover */ outb(byte2, PREP_IBM_PM1); /* second nibble */ mb(); udelay(100); /* important: let controller recover */ } static void prep_sig750_poweroff(void) { /* tweak the power manager found in most IBM PRePs (except Thinkpads) */ local_irq_disable(); /* set exception prefix high - to the prom */ _nmask_and_or_msr(0, MSR_IP); utah_sig87c750_setbit(21, 5, 1); /* set bit 21.5, "PMEXEC_OFF" */ while (1) ; /* not reached */ } static int prep_show_percpuinfo(struct seq_file *m, int i) { /* PREP's without residual data will give incorrect values here */ seq_printf(m, "clock\t\t: "); if (have_residual_data) seq_printf(m, "%ldMHz\n", (res->VitalProductData.ProcessorHz > 1024) ? res->VitalProductData.ProcessorHz / 1000000 : res->VitalProductData.ProcessorHz); else seq_printf(m, "???\n"); return 0; } #ifdef CONFIG_SOUND_CS4232 static long __init masktoint(unsigned int i) { int t = -1; while (i >> ++t) ; return (t-1); } /* * ppc_cs4232_dma and ppc_cs4232_dma2 are used in include/asm/dma.h * to distinguish sound dma-channels from others. This is because * blocksize on 16 bit dma-channels 5,6,7 is 128k, but * the cs4232.c uses 64k like on 8 bit dma-channels 0,1,2,3 */ static void __init prep_init_sound(void) { PPC_DEVICE *audiodevice = NULL; /* * Get the needed resource information from residual data. * */ if (have_residual_data) audiodevice = residual_find_device(~0, NULL, MultimediaController, AudioController, -1, 0); if (audiodevice != NULL) { PnP_TAG_PACKET *pkt; pkt = PnP_find_packet((unsigned char *)&res->DevicePnPHeap[audiodevice->AllocatedOffset], S5_Packet, 0); if (pkt != NULL) ppc_cs4232_dma = masktoint(pkt->S5_Pack.DMAMask); pkt = PnP_find_packet((unsigned char*)&res->DevicePnPHeap[audiodevice->AllocatedOffset], S5_Packet, 1); if (pkt != NULL) ppc_cs4232_dma2 = masktoint(pkt->S5_Pack.DMAMask); } /* * These are the PReP specs' defaults for the cs4231. We use these * as fallback incase we don't have residual data. * At least the IBM Thinkpad 850 with IDE DMA Channels at 6 and 7 * will use the other values. */ if (audiodevice == NULL) { switch (_prep_type) { case _PREP_IBM: ppc_cs4232_dma = 1; ppc_cs4232_dma2 = -1; break; default: ppc_cs4232_dma = 6; ppc_cs4232_dma2 = 7; } } /* * Find a way to push this information to the cs4232 driver * Give it out with printk, when not in cmd_line? * Append it to cmd_line and boot_command_line? * Format is cs4232=io,irq,dma,dma2 */ } #endif /* CONFIG_SOUND_CS4232 */ /* * Fill out screen_info according to the residual data. This allows us to use * at least vesafb. */ static void __init prep_init_vesa(void) { #if (defined(CONFIG_FB_VGA16) || defined(CONFIG_FB_VGA16_MODULE) || \ defined(CONFIG_FB_VESA)) PPC_DEVICE *vgadev = NULL; if (have_residual_data) vgadev = residual_find_device(~0, NULL, DisplayController, SVGAController, -1, 0); if (vgadev != NULL) { PnP_TAG_PACKET *pkt; pkt = PnP_find_large_vendor_packet( (unsigned char *)&res->DevicePnPHeap[vgadev->AllocatedOffset], 0x04, 0); /* 0x04 = Display Tag */ if (pkt != NULL) { unsigned char *ptr = (unsigned char *)pkt; if (ptr[4]) { /* graphics mode */ screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB; screen_info.lfb_depth = ptr[4] * 8; screen_info.lfb_width = swab16(*(short *)(ptr+6)); screen_info.lfb_height = swab16(*(short *)(ptr+8)); screen_info.lfb_linelength = swab16(*(short *)(ptr+10)); screen_info.lfb_base = swab32(*(long *)(ptr+12)); screen_info.lfb_size = swab32(*(long *)(ptr+20)) / 65536; } } } #endif } /* * Set DBAT 2 to access 0x80000000 so early progress messages will work */ static __inline__ void prep_set_bat(void) { /* wait for all outstanding memory access to complete */ mb(); /* setup DBATs */ mtspr(SPRN_DBAT2U, 0x80001ffe); mtspr(SPRN_DBAT2L, 0x8000002a); /* wait for updates */ mb(); } /* * IBM 3-digit status LED */ static unsigned int ibm_statusled_base; static void ibm_statusled_progress(char *s, unsigned short hex); static int ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2, void * dummy3) { ibm_statusled_progress(NULL, 0x505); /* SOS */ return NOTIFY_DONE; } static struct notifier_block ibm_statusled_block = { ibm_statusled_panic, NULL, INT_MAX /* try to do it first */ }; static void ibm_statusled_progress(char *s, unsigned short hex) { static int notifier_installed; /* * Progress uses 4 digits and we have only 3. So, we map 0xffff to * 0xfff for display switch off. Out of range values are mapped to * 0xeff, as I'm told 0xf00 and above are reserved for hardware codes. * Install the panic notifier when the display is first switched off. */ if (hex == 0xffff) { hex = 0xfff; if (!notifier_installed) { ++notifier_installed; atomic_notifier_chain_register(&panic_notifier_list, &ibm_statusled_block); } } else if (hex > 0xfff) hex = 0xeff; mb(); outw(hex, ibm_statusled_base); } static void __init ibm_statusled_init(void) { /* * The IBM 3-digit LED display is specified in the residual data * as an operator panel device, type "System Status LED". Find * that device and determine its address. We validate all the * other parameters on the off-chance another, similar device * exists. */ if (have_residual_data) { PPC_DEVICE *led; PnP_TAG_PACKET *pkt; led = residual_find_device(~0, NULL, SystemPeripheral, OperatorPanel, SystemStatusLED, 0); if (!led) return; pkt = PnP_find_packet((unsigned char *) &res->DevicePnPHeap[led->AllocatedOffset], S8_Packet, 0); if (!pkt) return; if (pkt->S8_Pack.IOInfo != ISAAddr16bit) return; if (*(unsigned short *)pkt->S8_Pack.RangeMin != *(unsigned short *)pkt->S8_Pack.RangeMax) return; if (pkt->S8_Pack.IOAlign != 2) return; if (pkt->S8_Pack.IONum != 2) return; ibm_statusled_base = ld_le16((unsigned short *) (pkt->S8_Pack.RangeMin)); ppc_md.progress = ibm_statusled_progress; } } static void __init prep_setup_arch(void) { unsigned char reg; int is_ide=0; /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000; /* Lookup PCI host bridges */ prep_find_bridges(); /* Set up floppy in PS/2 mode */ outb(0x09, SIO_CONFIG_RA); reg = inb(SIO_CONFIG_RD); reg = (reg & 0x3F) | 0x40; outb(reg, SIO_CONFIG_RD); outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */ switch ( _prep_type ) { case _PREP_IBM: reg = inb(PREP_IBM_PLANAR); printk(KERN_INFO "IBM planar ID: %02x", reg); switch (reg) { case PREP_IBM_SANDALFOOT: prep_gen_enable_l2(); setup_ibm_pci = prep_sandalfoot_setup_pci; ppc_md.power_off = prep_sig750_poweroff; ppc_md.show_cpuinfo = prep_sandalfoot_cpuinfo; break; case PREP_IBM_THINKPAD: prep_gen_enable_l2(); setup_ibm_pci = prep_thinkpad_setup_pci; ppc_md.power_off = prep_carrera_poweroff; ppc_md.show_cpuinfo = prep_thinkpad_cpuinfo; break; default: if (have_residual_data) { prep_gen_enable_l2(); setup_ibm_pci = prep_residual_setup_pci; ppc_md.power_off = prep_halt; ppc_md.show_cpuinfo = prep_gen_cpuinfo; break; } else printk(" - unknown! Assuming Carolina"); /* fall through */ case PREP_IBM_CAROLINA_IDE_0: case PREP_IBM_CAROLINA_IDE_1: case PREP_IBM_CAROLINA_IDE_2: case PREP_IBM_CAROLINA_IDE_3: is_ide = 1; case PREP_IBM_CAROLINA_SCSI_0: case PREP_IBM_CAROLINA_SCSI_1: case PREP_IBM_CAROLINA_SCSI_2: case PREP_IBM_CAROLINA_SCSI_3: prep_carolina_enable_l2(); setup_ibm_pci = prep_carolina_setup_pci; ppc_md.power_off = prep_sig750_poweroff; ppc_md.show_cpuinfo = prep_carolina_cpuinfo; break; case PREP_IBM_TIGER1_133: case PREP_IBM_TIGER1_166: case PREP_IBM_TIGER1_180: case PREP_IBM_TIGER1_xxx: case PREP_IBM_TIGER1_333: prep_carolina_enable_l2(); setup_ibm_pci = prep_tiger1_setup_pci; ppc_md.power_off = prep_sig750_poweroff; ppc_md.show_cpuinfo = prep_tiger1_cpuinfo; break; } printk("\n"); /* default root device */ if (is_ide) ROOT_DEV = MKDEV(IDE0_MAJOR, 3); else ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 3); break; case _PREP_Motorola: prep_gen_enable_l2(); ppc_md.power_off = prep_halt; ppc_md.show_cpuinfo = prep_mot_cpuinfo; #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else #endif #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else ROOT_DEV = Root_SDA2; #endif break; } /* Read in NVRAM data */ init_prep_nvram(); /* if no bootargs, look in NVRAM */ if ( cmd_line[0] == '\0' ) { char *bootargs; bootargs = prep_nvram_get_var("bootargs"); if (bootargs != NULL) { strcpy(cmd_line, bootargs); /* again.. */ strcpy(boot_command_line, cmd_line); } } #ifdef CONFIG_SOUND_CS4232 prep_init_sound(); #endif /* CONFIG_SOUND_CS4232 */ prep_init_vesa(); switch (_prep_type) { case _PREP_Motorola: raven_init(); break; case _PREP_IBM: ibm_prep_init(); break; } #ifdef CONFIG_VGA_CONSOLE /* vgacon.c needs to know where we mapped IO memory in io_block_mapping() */ vgacon_remap_base = 0xf0000000; conswitchp = &vga_con; #endif } /* * First, see if we can get this information from the residual data. * This is important on some IBM PReP systems. If we cannot, we let the * TODC code handle doing this. */ static void __init prep_calibrate_decr(void) { if (have_residual_data) { unsigned long freq, divisor = 4; if ( res->VitalProductData.ProcessorBusHz ) { freq = res->VitalProductData.ProcessorBusHz; printk("time_init: decrementer frequency = %lu.%.6lu MHz\n", (freq/divisor)/1000000, (freq/divisor)%1000000); tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); tb_ticks_per_jiffy = freq / HZ / divisor; } } else todc_calibrate_decr(); } static void __init prep_init_IRQ(void) { unsigned int pci_viddid, pci_did; if (OpenPIC_Addr != NULL) { openpic_init(NUM_8259_INTERRUPTS); /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", i8259_irq); } if (have_residual_data) { i8259_init(residual_isapic_addr(), 0); return; } /* If we have a Raven PCI bridge or a Hawk PCI bridge / Memory * controller, we poll (as they have a different int-ack address). */ early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &pci_viddid); pci_did = (pci_viddid & 0xffff0000) >> 16; if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA) && ((pci_did == PCI_DEVICE_ID_MOTOROLA_RAVEN) || (pci_did == PCI_DEVICE_ID_MOTOROLA_HAWK))) i8259_init(0, 0); else /* PCI interrupt ack address given in section 6.1.8 of the * PReP specification. */ i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0); } #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) /* * IDE stuff. */ static int prep_ide_default_irq(unsigned long base) { switch (base) { case 0x1f0: return 13; case 0x170: return 13; case 0x1e8: return 11; case 0x168: return 10; case 0xfff0: return 14; /* MCP(N)750 ide0 */ case 0xffe0: return 15; /* MCP(N)750 ide1 */ default: return 0; } } static unsigned long prep_ide_default_io_base(int index) { switch (index) { case 0: return 0x1f0; case 1: return 0x170; case 2: return 0x1e8; case 3: return 0x168; default: return 0; } } #endif #ifdef CONFIG_SMP /* PReP (MTX) support */ static int __init smp_prep_probe(void) { extern int mot_multi; if (mot_multi) { openpic_request_IPIs(); smp_hw_index[1] = 1; return 2; } return 1; } static void __init smp_prep_kick_cpu(int nr) { *(unsigned long *)KERNELBASE = nr; asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); printk("CPU1 released, waiting\n"); } static void __init smp_prep_setup_cpu(int cpu_nr) { if (OpenPIC_Addr) do_openpic_setup_cpu(); } static struct smp_ops_t prep_smp_ops = { smp_openpic_message_pass, smp_prep_probe, smp_prep_kick_cpu, smp_prep_setup_cpu, .give_timebase = smp_generic_give_timebase, .take_timebase = smp_generic_take_timebase, }; #endif /* CONFIG_SMP */ /* * Setup the bat mappings we're going to load that cover * the io areas. RAM was mapped by mapin_ram(). * -- Cort */ static void __init prep_map_io(void) { io_block_mapping(0x80000000, PREP_ISA_IO_BASE, 0x10000000, _PAGE_IO); io_block_mapping(0xf0000000, PREP_ISA_MEM_BASE, 0x08000000, _PAGE_IO); } static int __init prep_request_io(void) { #ifdef CONFIG_NVRAM request_region(PREP_NVRAM_AS0, 0x8, "nvram"); #endif request_region(0x00,0x20,"dma1"); request_region(0x40,0x20,"timer"); request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); return 0; } device_initcall(prep_request_io); void __init prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { #ifdef CONFIG_PREP_RESIDUAL /* make a copy of residual data */ if ( r3 ) { memcpy((void *)res,(void *)(r3+KERNELBASE), sizeof(RESIDUAL)); } #endif isa_io_base = PREP_ISA_IO_BASE; isa_mem_base = PREP_ISA_MEM_BASE; pci_dram_offset = PREP_PCI_DRAM_OFFSET; ISA_DMA_THRESHOLD = 0x00ffffff; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; ppc_do_canonicalize_irqs = 1; /* figure out what kind of prep workstation we are */ if (have_residual_data) { if ( !strncmp(res->VitalProductData.PrintableModel,"IBM",3) ) _prep_type = _PREP_IBM; else _prep_type = _PREP_Motorola; } else { /* assume motorola if no residual (netboot?) */ _prep_type = _PREP_Motorola; } #ifdef CONFIG_PREP_RESIDUAL /* Switch off all residual data processing if the user requests it */ if (strstr(cmd_line, "noresidual") != NULL) res = NULL; #endif /* Initialise progress early to get maximum benefit */ prep_set_bat(); ibm_statusled_init(); ppc_md.setup_arch = prep_setup_arch; ppc_md.show_percpuinfo = prep_show_percpuinfo; ppc_md.show_cpuinfo = NULL; /* set in prep_setup_arch() */ ppc_md.init_IRQ = prep_init_IRQ; /* this gets changed later on if we have an OpenPIC -- Cort */ ppc_md.get_irq = i8259_irq; ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; ppc_md.restart = prep_restart; ppc_md.power_off = NULL; /* set in prep_setup_arch() */ ppc_md.halt = prep_halt; ppc_md.nvram_read_val = prep_nvram_read_val; ppc_md.nvram_write_val = prep_nvram_write_val; ppc_md.time_init = todc_time_init; if (_prep_type == _PREP_IBM) { ppc_md.rtc_read_val = todc_mc146818_read_val; ppc_md.rtc_write_val = todc_mc146818_write_val; TODC_INIT(TODC_TYPE_MC146818, RTC_PORT(0), NULL, RTC_PORT(1), 8); } else { TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1, PREP_NVRAM_DATA, 8); } ppc_md.calibrate_decr = prep_calibrate_decr; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.setup_io_mappings = prep_map_io; #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ppc_ide_md.default_irq = prep_ide_default_irq; ppc_ide_md.default_io_base = prep_ide_default_io_base; #endif #ifdef CONFIG_SMP smp_ops = &prep_smp_ops; #endif /* CONFIG_SMP */ }