/* * Copyright 2004-2009 Analog Devices Inc. * * Licensed under the GPL-2 or later */ #include #include #include #include #include #include #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else .text #endif ENTRY(_ret_from_fork) #ifdef CONFIG_IPIPE /* * Hw IRQs are off on entry, and we don't want the scheduling tail * code to starve high priority domains from interrupts while it * runs. Therefore we first stall the root stage to have the * virtual interrupt state reflect IMASK. */ p0.l = ___ipipe_root_status; p0.h = ___ipipe_root_status; r4 = [p0]; bitset(r4, 0); [p0] = r4; /* * Then we may enable hw IRQs, allowing preemption from high * priority domains. schedule_tail() will do local_irq_enable() * since Blackfin does not define __ARCH_WANT_UNLOCKED_CTXSW, so * there is no need to unstall the root domain by ourselves * afterwards. */ p0.l = _bfin_irq_flags; p0.h = _bfin_irq_flags; r4 = [p0]; sti r4; #endif /* CONFIG_IPIPE */ SP += -12; pseudo_long_call _schedule_tail, p5; SP += 12; r0 = [sp + PT_IPEND]; cc = bittst(r0,1); if cc jump .Lin_kernel; RESTORE_CONTEXT rti; .Lin_kernel: bitclr(r0,1); [sp + PT_IPEND] = r0; /* do a 'fake' RTI by jumping to [RETI] * to avoid clearing supervisor mode in child */ r0 = [sp + PT_PC]; [sp + PT_P0] = r0; RESTORE_ALL_SYS jump (p0); ENDPROC(_ret_from_fork) ENTRY(_sys_fork) r0 = -EINVAL; #if (ANOMALY_05000371) nop; nop; nop; #endif rts; ENDPROC(_sys_fork) ENTRY(_sys_vfork) r0 = sp; r0 += 24; [--sp] = rets; SP += -12; pseudo_long_call _bfin_vfork, p2; SP += 12; rets = [sp++]; rts; ENDPROC(_sys_vfork) ENTRY(_sys_clone) r0 = sp; r0 += 24; [--sp] = rets; SP += -12; pseudo_long_call _bfin_clone, p2; SP += 12; rets = [sp++]; rts; ENDPROC(_sys_clone) ENTRY(_sys_rt_sigreturn) r0 = sp; r0 += 24; [--sp] = rets; SP += -12; pseudo_long_call _do_rt_sigreturn, p2; SP += 12; rets = [sp++]; rts; ENDPROC(_sys_rt_sigreturn)