/* * linux/arch/arm/mach-sa1100/collie.c * * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * * This file contains all Collie-specific tweaks. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * ChangeLog: * 2006 Pavel Machek * 03-06-2004 John Lenz * 06-04-2002 Chris Larson * 04-16-2001 Lineo Japan,Inc. ... */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "generic.h" static struct resource collie_scoop_resources[] = { [0] = { .start = 0x40800000, .end = 0x40800fff, .flags = IORESOURCE_MEM, }, }; static struct scoop_config collie_scoop_setup = { .io_dir = COLLIE_SCOOP_IO_DIR, .io_out = COLLIE_SCOOP_IO_OUT, }; struct platform_device colliescoop_device = { .name = "sharp-scoop", .id = -1, .dev = { .platform_data = &collie_scoop_setup, }, .num_resources = ARRAY_SIZE(collie_scoop_resources), .resource = collie_scoop_resources, }; static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = { { .dev = &colliescoop_device.dev, .irq = COLLIE_IRQ_GPIO_CF_IRQ, .cd_irq = COLLIE_IRQ_GPIO_CF_CD, .cd_irq_str = "PCMCIA0 CD", }, }; static struct scoop_pcmcia_config collie_pcmcia_config = { .devs = &collie_pcmcia_scoop[0], .num_devs = 1, }; static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, }; #ifdef CONFIG_SHARP_LOCOMO /* * low-level UART features. */ struct platform_device collie_locomo_device; static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) { if (mctrl & TIOCM_RTS) locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0); else locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1); if (mctrl & TIOCM_DTR) locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0); else locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1); } static u_int collie_uart_get_mctrl(struct uart_port *port) { int ret = TIOCM_CD; unsigned int r; r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); if (r == -ENODEV) return ret; if (r & LOCOMO_GPIO_CTS) ret |= TIOCM_CTS; if (r & LOCOMO_GPIO_DSR) ret |= TIOCM_DSR; return ret; } static struct sa1100_port_fns collie_port_fns __initdata = { .set_mctrl = collie_uart_set_mctrl, .get_mctrl = collie_uart_get_mctrl, }; static int collie_uart_probe(struct locomo_dev *dev) { return 0; } static int collie_uart_remove(struct locomo_dev *dev) { return 0; } static struct locomo_driver collie_uart_driver = { .drv = { .name = "collie_uart", }, .devid = LOCOMO_DEVID_UART, .probe = collie_uart_probe, .remove = collie_uart_remove, }; static int __init collie_uart_init(void) { return locomo_driver_register(&collie_uart_driver); } device_initcall(collie_uart_init); #endif static struct resource locomo_resources[] = { [0] = { .start = 0x40000000, .end = 0x40001fff, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_GPIO25, .end = IRQ_GPIO25, .flags = IORESOURCE_IRQ, }, }; struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; static struct platform_device *devices[] __initdata = { &collie_locomo_device, &colliescoop_device, }; static struct mtd_partition collie_partitions[] = { { .name = "bootloader", .offset = 0, .size = 0x000C0000, .mask_flags = MTD_WRITEABLE }, { .name = "kernel", .offset = MTDPART_OFS_APPEND, .size = 0x00100000, }, { .name = "rootfs", .offset = MTDPART_OFS_APPEND, .size = 0x00e20000, } }; static int collie_flash_init(void) { int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable"); if (rc) return rc; rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1); if (rc) gpio_free(COLLIE_GPIO_VPEN); return rc; } static void collie_set_vpp(int vpp) { gpio_set_value(COLLIE_GPIO_VPEN, vpp); } static void collie_flash_exit(void) { gpio_free(COLLIE_GPIO_VPEN); } static struct flash_platform_data collie_flash_data = { .map_name = "cfi_probe", .init = collie_flash_init, .set_vpp = collie_set_vpp, .exit = collie_flash_exit, .parts = collie_partitions, .nr_parts = ARRAY_SIZE(collie_partitions), }; static struct resource collie_flash_resources[] = { { .start = SA1100_CS0_PHYS, .end = SA1100_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, } }; static void __init collie_init(void) { int ret = 0; /* cpu initialize */ GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_MCP_CLK | GPIO_32_768kHz; GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON | COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY | COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC; PGSR = COLLIE_GPIO_nREMOCON_ON; PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; PCFR = PCFR_OPDE; platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); } sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); sa11x0_register_mcp(&collie_mcp_data); sharpsl_save_param(); } static struct map_desc collie_io_desc[] __initdata = { { /* 32M main flash (cs0) */ .virtual = 0xe8000000, .pfn = __phys_to_pfn(0x00000000), .length = 0x02000000, .type = MT_DEVICE }, { /* 32M boot flash (cs1) */ .virtual = 0xea000000, .pfn = __phys_to_pfn(0x08000000), .length = 0x02000000, .type = MT_DEVICE } }; static void __init collie_map_io(void) { sa1100_map_io(); iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc)); #ifdef CONFIG_SHARP_LOCOMO sa1100_register_uart_fns(&collie_port_fns); #endif sa1100_register_uart(0, 3); sa1100_register_uart(1, 1); } MACHINE_START(COLLIE, "Sharp-Collie") .phys_io = 0x80000000, .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .map_io = collie_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, MACHINE_END