/* * Copyright (C) 2001-2006 Storlink, Corp. * Copyright (C) 2008-2009 Paulius Zaleckas * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include /* * Register definitions for the timers */ #define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00) #define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04) #define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08) #define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C) #define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30) #define TIMER_1_CR_ENABLE (1 << 0) #define TIMER_1_CR_CLOCK (1 << 1) #define TIMER_1_CR_INT (1 << 2) #define TIMER_2_CR_ENABLE (1 << 3) #define TIMER_2_CR_CLOCK (1 << 4) #define TIMER_2_CR_INT (1 << 5) #define TIMER_3_CR_ENABLE (1 << 6) #define TIMER_3_CR_CLOCK (1 << 7) #define TIMER_3_CR_INT (1 << 8) /* * IRQ handler for the timer */ static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id) { timer_tick(); return IRQ_HANDLED; } static struct irqaction gemini_timer_irq = { .name = "Gemini Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = gemini_timer_interrupt, }; /* * Set up timer interrupt, and return the current time in seconds. */ void __init gemini_timer_init(void) { unsigned int tick_rate, reg_v; reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS)); tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000; printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000); tick_rate /= 6; /* APB bus run AHB*(1/6) */ switch(reg_v & CPU_AHB_RATIO_MASK) { case CPU_AHB_1_1: printk(KERN_CONT "(1/1)\n"); break; case CPU_AHB_3_2: printk(KERN_CONT "(3/2)\n"); break; case CPU_AHB_24_13: printk(KERN_CONT "(24/13)\n"); break; case CPU_AHB_2_1: printk(KERN_CONT "(2/1)\n"); break; } /* * Make irqs happen for the system timer */ setup_irq(IRQ_TIMER2, &gemini_timer_irq); /* Start the timer */ __raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); __raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); __raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); }