From 1841f613fd2e73f09d3fa2beeccf2f8d978ec2db Mon Sep 17 00:00:00 2001 From: Martin Langer Date: Mon, 27 Mar 2006 12:41:01 +0200 Subject: [ALSA] Add snd-miro driver Added snd-miro driver for miroSOUND PCM by Martin Langer. Signed-off-by: Takashi Iwai --- sound/isa/opti9xx/miro.h | 73 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 sound/isa/opti9xx/miro.h (limited to 'sound/isa/opti9xx/miro.h') diff --git a/sound/isa/opti9xx/miro.h b/sound/isa/opti9xx/miro.h new file mode 100644 index 00000000000..6e1385b8e07 --- /dev/null +++ b/sound/isa/opti9xx/miro.h @@ -0,0 +1,73 @@ +#ifndef _MIRO_H_ +#define _MIRO_H_ + +#define ACI_REG_COMMAND 0 /* write register offset */ +#define ACI_REG_STATUS 1 /* read register offset */ +#define ACI_REG_BUSY 2 /* busy register offset */ +#define ACI_REG_RDS 2 /* PCM20: RDS register offset */ +#define ACI_MINTIME 500 /* ACI time out limit */ + +#define ACI_SET_MUTE 0x0d +#define ACI_SET_POWERAMP 0x0f +#define ACI_SET_TUNERMUTE 0xa3 +#define ACI_SET_TUNERMONO 0xa4 +#define ACI_SET_IDE 0xd0 +#define ACI_SET_WSS 0xd1 +#define ACI_SET_SOLOMODE 0xd2 +#define ACI_SET_PREAMP 0x03 +#define ACI_GET_PREAMP 0x21 +#define ACI_WRITE_TUNE 0xa7 +#define ACI_READ_TUNERSTEREO 0xa8 +#define ACI_READ_TUNERSTATION 0xa9 +#define ACI_READ_VERSION 0xf1 +#define ACI_READ_IDCODE 0xf2 +#define ACI_INIT 0xff +#define ACI_STATUS 0xf0 +#define ACI_S_GENERAL 0x00 +#define ACI_ERROR_OP 0xdf + +/* ACI Mixer */ + +/* These are the values for the right channel GET registers. + Add an offset of 0x01 for the left channel register. + (left=right+0x01) */ + +#define ACI_GET_MASTER 0x03 +#define ACI_GET_MIC 0x05 +#define ACI_GET_LINE 0x07 +#define ACI_GET_CD 0x09 +#define ACI_GET_SYNTH 0x0b +#define ACI_GET_PCM 0x0d +#define ACI_GET_LINE1 0x10 /* Radio on PCM20 */ +#define ACI_GET_LINE2 0x12 + +#define ACI_GET_EQ1 0x22 /* from Bass ... */ +#define ACI_GET_EQ2 0x24 +#define ACI_GET_EQ3 0x26 +#define ACI_GET_EQ4 0x28 +#define ACI_GET_EQ5 0x2a +#define ACI_GET_EQ6 0x2c +#define ACI_GET_EQ7 0x2e /* ... to Treble */ + +/* And these are the values for the right channel SET registers. + For left channel access you have to add an offset of 0x08. + MASTER is an exception, which needs an offset of 0x01 */ + +#define ACI_SET_MASTER 0x00 +#define ACI_SET_MIC 0x30 +#define ACI_SET_LINE 0x31 +#define ACI_SET_CD 0x34 +#define ACI_SET_SYNTH 0x33 +#define ACI_SET_PCM 0x32 +#define ACI_SET_LINE1 0x35 /* Radio on PCM20 */ +#define ACI_SET_LINE2 0x36 + +#define ACI_SET_EQ1 0x40 /* from Bass ... */ +#define ACI_SET_EQ2 0x41 +#define ACI_SET_EQ3 0x42 +#define ACI_SET_EQ4 0x43 +#define ACI_SET_EQ5 0x44 +#define ACI_SET_EQ6 0x45 +#define ACI_SET_EQ7 0x46 /* ... to Treble */ + +#endif /* _MIRO_H_ */ -- cgit v1.2.3