From 85f8d3e5faea8bd36c3e5196f8334f7db45e19b2 Mon Sep 17 00:00:00 2001 From: Ray Copeland Date: Fri, 5 Feb 2010 19:58:35 +0100 Subject: hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland Acked-by: "Darrick J. Wong" Signed-off-by: Jean Delvare Cc: stable@kernel.org --- drivers/hwmon/adt7462.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index a31e77c776a..b8156b4893b 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -179,7 +179,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; * * Some, but not all, of these voltages have low/high limits. */ -#define ADT7462_VOLT_COUNT 12 +#define ADT7462_VOLT_COUNT 13 #define ADT7462_VENDOR 0x41 #define ADT7462_DEVICE 0x62 -- cgit v1.2.3