AgeCommit message (Collapse)Author
2010-08-20Linux Kroah-Hartman
2010-08-20vmware: fix build error in vmware.cGreg Kroah-Hartman
This fixes a build error reported in vmware.c due to commit 9f242dc10e0c3c1eb32d8c83c18650a35fd7f80d Reported-by: Sven Joachim <svenjoac@gmx.de> Cc: Alok Kataria <akataria@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-20mm: fix up some user-visible effects of the stack guard pageLinus Torvalds
commit d7824370e26325c881b665350ce64fb0a4fde24a upstream. This commit makes the stack guard page somewhat less visible to user space. It does this by: - not showing the guard page in /proc/<pid>/maps It looks like lvm-tools will actually read /proc/self/maps to figure out where all its mappings are, and effectively do a specialized "mlockall()" in user space. By not showing the guard page as part of the mapping (by just adding PAGE_SIZE to the start for grows-up pages), lvm-tools ends up not being aware of it. - by also teaching the _real_ mlock() functionality not to try to lock the guard page. That would just expand the mapping down to create a new guard page, so there really is no point in trying to lock it in place. It would perhaps be nice to show the guard page specially in /proc/<pid>/maps (or at least mark grow-down segments some way), but let's not open ourselves up to more breakage by user space from programs that depends on the exact deails of the 'maps' file. Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools source code to see what was going on with the whole new warning. Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-20mm: fix page table unmap for stack guard page properlyLinus Torvalds
commit 11ac552477e32835cb6970bf0a70c210807f5673 upstream. We do in fact need to unmap the page table _before_ doing the whole stack guard page logic, because if it is needed (mainly 32-bit x86 with PAE and CONFIG_HIGHPTE, but other architectures may use it too) then it will do a kmap_atomic/kunmap_atomic. And those kmaps will create an atomic region that we cannot do allocations in. However, the whole stack expand code will need to do anon_vma_prepare() and vma_lock_anon_vma() and they cannot do that in an atomic region. Now, a better model might actually be to do the anon_vma_prepare() when _creating_ a VM_GROWSDOWN segment, and not have to worry about any of this at page fault time. But in the meantime, this is the straightforward fix for the issue. See https://bugzilla.kernel.org/show_bug.cgi?id=16588 for details. Reported-by: Wylda <wylda@volny.cz> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Reported-by: Mike Pagano <mpagano@gentoo.org> Reported-by: François Valenduc <francois.valenduc@tvcablenet.be> Tested-by: Ed Tomlinson <edt@aei.ca> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Linux Kroah-Hartman
2010-08-13x86: don't send SIGBUS for kernel page faultsLinus Torvalds
commit 96054569190bdec375fe824e48ca1f4e3b53dd36 upstream. It's wrong for several reasons, but the most direct one is that the fault may be for the stack accesses to set up a previous SIGBUS. When we have a kernel exception, the kernel exception handler does all the fixups, not some user-level signal handler. Even apart from the nested SIGBUS issue, it's also wrong to give out kernel fault addresses in the signal handler info block, or to send a SIGBUS when a system call already returns EFAULT. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mm: fix missing page table unmap for stack guard page failure caseLinus Torvalds
commit 5528f9132cf65d4d892bcbc5684c61e7822b21e9 upstream. .. which didn't show up in my tests because it's a no-op on x86-64 and most other architectures. But we enter the function with the last-level page table mapped, and should unmap it at exit. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mm: keep a guard page below a grow-down stack segmentLinus Torvalds
commit 320b2b8de12698082609ebbc1a17165727f4c893 upstream. This is a rather minimally invasive patch to solve the problem of the user stack growing into a memory mapped area below it. Whenever we fill the first page of the stack segment, expand the segment down by one page. Now, admittedly some odd application might _want_ the stack to grow down into the preceding memory mapping, and so we may at some point need to make this a process tunable (some people might also want to have more than a single page of guarding), but let's try the minimal approach first. Tested with trivial application that maps a single page just below the stack, and then starts recursing. Without this, we will get a SIGSEGV _after_ the stack has smashed the mapping. With this patch, we'll get a nice SIGBUS just as the stack touches the page just above the mapping. Requested-by: Keith Packard <keithp@keithp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ext4: fix freeze deadlock under IOEric Sandeen
commit 437f88cc031ffe7f37f3e705367f4fe1f4be8b0f upstream. Commit 6b0310fbf087ad6 caused a regression resulting in deadlocks when freezing a filesystem which had active IO; the vfs_check_frozen level (SB_FREEZE_WRITE) did not let the freeze-related IO syncing through. Duh. Changing the test to FREEZE_TRANS should let the normal freeze syncing get through the fs, but still block any transactions from starting once the fs is completely frozen. I tested this by running fsstress in the background while periodically snapshotting the fs and running fsck on the result. I ran into occasional deadlocks, but different ones. I think this is a fine fix for the problem at hand, and the other deadlocky things will need more investigation. Reported-by: Phillip Susi <psusi@cfl.rr.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13crypto: testmgr - add an option to disable cryptoalgos' self-testsAlexander Shishkin
commit 0b767f96164b2b27488e3daa722ff16e89d49314 upstream. By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus self-tests will still run, but it is now possible to disable them to gain some time during bootup. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13xen: Do not suspend IPI IRQs.Ian Campbell
commit 4877c737283813bdb4bebfa3168c1585f6e3a8ca upstream. In general the semantics of IPIs are that they are are expected to continue functioning after dpm_suspend_noirq(). Specifically I have seen a deadlock between the callfunc IPI and the stop machine used by xen's do_suspend() routine. If one CPU has already called dpm_suspend_noirq() then there is a window where it can be sent a callfunc IPI before all the other CPUs have entered stop_cpu(). If this happens then the first CPU ends up spinning in stop_cpu() waiting for the other to rendezvous in state STOPMACHINE_PREPARE while the other is spinning in csd_lock_wait(). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13irq: Add new IRQ flag IRQF_NO_SUSPENDIan Campbell
commit 685fd0b4ea3f0f1d5385610b0d5b57775a8d5842 upstream. A small number of users of IRQF_TIMER are using it for the implied no suspend behaviour on interrupts which are not timer interrupts. Therefore add a new IRQF_NO_SUSPEND flag, rename IRQF_TIMER to __IRQF_TIMER and redefine IRQF_TIMER in terms of these new flags. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: xen-devel@lists.xensource.com Cc: linux-input@vger.kernel.org Cc: linuxppc-dev@ozlabs.org Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1280398595-29708-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13net: Fix NETDEV_NOTIFY_PEERS to not conflict with NETDEV_BONDING_DESLAVE.David S. Miller
commit 38117d1495e587fbb10d6e55733139a27893cef5 upstream. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13jfs: don't allow os2 xattr namespace overlap with othersDave Kleikamp
commit aca0fa34bdaba39bfddddba8ca70dba4782e8fe6 upstream. It's currently possible to bypass xattr namespace access rules by prefixing valid xattr names with "os2.", since the os2 namespace stores extended attributes in a legacy format with no prefix. This patch adds checking to deny access to any valid namespace prefix following "os2.". Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Reported-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13l2tp: fix export of header file for userspaceJames Chapman
commit 4565956dc0847985c0403c9ebbf274b6a122e1e2 upstream. The header file l2tp.h should be exported to the installed include/linux/ tree for userspace programs. This patch fixes compilation errors in L2TP userspace apps which want to use the new L2TP support introduced in 2.6.35. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mtd: gen_nand: fix support for multiple chipsMarek Vasut
commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb upstream. This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mtd: mxc_nand: fix unbalanced enable for IRQEric Bénard
commit 6a8cfcfb0de881735df4031eb5cc99be3d0971e9 upstream. * preset should be done before sending the reset command * without this, I get the following error on an i.MX35 : [ 0.900000] ------------[ cut here ]------------ [ 0.900000] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x4c/0x88() [ 0.900000] Unbalanced enable for IRQ 33 [ 0.900000] Modules linked in: [ 0.900000] [<c002ffb8>] (unwind_backtrace+0x0/0xf0) from [<c02f7d0c>] (dump_stack+0x18/0x1c) [ 0.900000] [<c02f7d0c>] (dump_stack+0x18/0x1c) from [<c0049a44>] (warn_slowpath_common+0x54/0x6c) [ 0.900000] [<c0049a44>] (warn_slowpath_common+0x54/0x6c) from [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) [ 0.900000] [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) from [<c008f65c>] (__enable_irq+0x4c/0x88) [ 0.900000] [<c008f65c>] (__enable_irq+0x4c/0x88) from [<c008fca0>] (enable_irq+0x54/0x98) [ 0.900000] [<c008fca0>] (enable_irq+0x54/0x98) from [<c021e618>] (wait_op_done+0x40/0x134) [ 0.900000] [<c021e618>] (wait_op_done+0x40/0x134) from [<c021e808>] (send_cmd+0x30/0x38) [ 0.900000] [<c021e808>] (send_cmd+0x30/0x38) from [<c021eb8c>] (mxc_nand_command+0x26c/0x328) [ 0.900000] [<c021eb8c>] (mxc_nand_command+0x26c/0x328) from [<c021aa60>] (nand_scan_ident+0x188/0x6c0) [ 0.900000] [<c021aa60>] (nand_scan_ident+0x188/0x6c0) from [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) [ 0.900000] [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) from [<c01f9e88>] (platform_drv_probe+0x20/0x24) [ 0.900000] [<c01f9e88>] (platform_drv_probe+0x20/0x24) from [<c01f8c38>] (driver_probe_device+0xb0/0x164) [ 0.900000] [<c01f8c38>] (driver_probe_device+0xb0/0x164) from [<c01f8d54>] (__driver_attach+0x68/0x8c) [ 0.900000] [<c01f8d54>] (__driver_attach+0x68/0x8c) from [<c01f8348>] (bus_for_each_dev+0x50/0x84) [ 0.900000] [<c01f8348>] (bus_for_each_dev+0x50/0x84) from [<c01f8a9c>] (driver_attach+0x20/0x28) [ 0.900000] [<c01f8a9c>] (driver_attach+0x20/0x28) from [<c01f7c00>] (bus_add_driver+0x144/0x2dc) [ 0.900000] [<c01f7c00>] (bus_add_driver+0x144/0x2dc) from [<c01f906c>] (driver_register+0xb0/0x13c) [ 0.900000] [<c01f906c>] (driver_register+0xb0/0x13c) from [<c01fa13c>] (platform_driver_register+0x4c/0x60) [ 0.900000] [<c01fa13c>] (platform_driver_register+0x4c/0x60) from [<c01fa170>] (platform_driver_probe+0x20/0xa0) [ 0.900000] [<c01fa170>] (platform_driver_probe+0x20/0xa0) from [<c001a708>] (mxc_nd_init+0x18/0x24) [ 0.900000] [<c001a708>] (mxc_nd_init+0x18/0x24) from [<c002938c>] (do_one_initcall+0x64/0x1bc) [ 0.900000] [<c002938c>] (do_one_initcall+0x64/0x1bc) from [<c00084c4>] (kernel_init+0xe8/0x1ac) [ 0.900000] [<c00084c4>] (kernel_init+0xe8/0x1ac) from [<c002aee8>] (kernel_thread_exit+0x0/0x8) [ 0.900000] ---[ end trace 8bf72ac6ba089a19 ]--- [ 1.140000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13sched: Revert nohz_ratelimit() for nowPeter Zijlstra
commit 396e894d289d69bacf5acd983c97cd6e21a14c08 upstream. Norbert reported that nohz_ratelimit() causes his laptop to burn about 4W (40%) extra. For now back out the change and see if we can adjust the power management code to make better decisions. Reported-by: Norbert Preining <preining@logic.at> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Bluetooth: Added support for controller shipped with iMac i5Cyril Lacoux
commit 0a79f67445de50ca0a8dc1d34f3cc406d89c28b2 upstream. Device class is ff(vend.) instead of e0(wlcon). Output from command `usb-devices`: T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8215 Rev=01.82 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=7C6D62936607 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by: Cyril Lacoux <clacoux@ifeelgood.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: serial: fix stalled writesJohan Hovold
commit b58af4066d240b18b43f202e07b9ec7461d90b17 upstream. As David VomLehn points out, it was possible to receive an interrupt before clearing the free-urb flag which could lead to the urb being incorrectly marked as busy. For the same reason, move tx_bytes accounting so that it will never be negative. Note that the free-flags set and clear operations do not need any additional locking as they are manipulated while USB_SERIAL_WRITE_BUSY is set. Reported-by: David VomLehn <dvomlehn@cisco.com> Tested-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: fix thread-unsafe anchor utiliy routinesChristian Lamparter
commit b3e670443b7fb8a2d29831b62b44a039c283e351 upstream. This patch fixes a race condition in two utility routines related to the removal/unlinking of urbs from an anchor. If two threads are concurrently accessing the same anchor, both could end up with the same urb - thinking they are the exclusive owner. Alan Stern pointed out a related issue in usb_unlink_anchored_urbs: "The URB isn't removed from the anchor until it completes (as a by-product of completion, in fact), which might not be for quite some time after the unlink call returns. In the meantime, the subroutine will keep trying to unlink it, over and over again." Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: usbtest: avoid to free coherent buffer in atomic contextMing Lei
commit e10e1bec8e6654de4591ef45ddd6a6d1e5b2591c upstream. This patch fixes the warning below: [30753.755998] ------------[ cut here ]------------ [30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]() [30753.755998] Hardware name: 6475EK2 [30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo] [30753.755998] Pid: 0, comm: swapper Tainted: G W 2.6.35-rc6-gkh-wl+ #49 [30753.755998] Call Trace: [30753.755998] <IRQ> [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98 [30753.755998] [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17 [30753.755998] [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore] [30753.755998] [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore] [30753.755998] [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest] [30753.755998] [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest] [30753.755998] [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore] [30753.755998] [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd] [30753.755998] [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd] [30753.755998] [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd] [30753.755998] [<ffffffff8100fb05>] ? sched_clock+0x9/0xd [30753.755998] [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82 [30753.755998] [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce [30753.755998] [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf [30753.755998] [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e [30753.755998] [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore] [30753.755998] [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5 [30753.755998] [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2 [30753.755998] [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a [30753.755998] [<ffffffff8100b75d>] do_IRQ+0x57/0xbe [30753.755998] [<ffffffff8136a693>] ret_from_intr+0x0/0x16 [30753.755998] <EOI> [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269 [30753.755998] [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269 [30753.755998] [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce [30753.755998] [<ffffffff81008dd5>] cpu_idle+0x61/0xaa [30753.755998] [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6 [30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: cp210x: Add four new device IDsAlessio Igor Bogani
commit 356c5a4834a74c621715f7a7f16ded914eecbd3c upstream. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: ftdi_sio: device id for Navitatordranch@trinnet.net
commit b6180ef7c99574c3350bbffa2a3a9d675321543d upstream. This patch is to add a US Interface, Inc. "Navigator" USB device. Specifically, it's a HAM Radio USB sound modem that also incorporates three pairs of unique FTDI serial ports. The standard Linux FTDI serial driver will only recognize the first two serial ports of an unknown FDTI derived device and this patch adds in recognition to these specific new IDs. Signed-off-by: David A. Ranch <dranch@trinnet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: option: add huawei k3765 k4505 devices to work properlyAndrew Bird
commit 0372a754be9aa43e19fd86c9bc04796d43b55e38 upstream. This patch adds the product IDs of Huawei's K3765 and K4505 mobile broadband usb modems to option.c. It also adds a quirk to the option probe function so that binding to the device's network interface(class 0xff) is avoided. This is necessary to allow another driver to bind to that, and to avoid programs like wvdial opening a nonfunctioning tty during modem discovery. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: option: Huawei ETS 1220 support addedPavel Kazlou
commit b972302b0a13aaddc9e90da2b4b52722e5d0e776 upstream. The patch adds Huawei ETS 1220 product id into the list of supported devices in 'option' usb serial driver. Signed-off-by: Pavel Kazlou <p.i.kazlou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: serial: enabling support for Segway RMP in ftdi_sioJohn G. Rogers
commit afad19648f70c6493193e0a774bd754b7790b4a0 upstream. I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module. Signed-off-by: John Rogers <jgrogers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB delay init quirk for logitech Harmony 700-series devicesPhil Dibowitz
commit 93362a875fc69881ae69299efaf19a55a1f57db0 upstream. The Logitech Harmony 700 series needs an extra delay during initialization. This patch adds a USB quirk which enables such a delay and adds the device to the quirks list. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: resizing usbmon binary interface buffer causes protection faultsSteven Robertson
commit 33d973ad88ceb83ed1449592b7574b5b5bb33ac6 upstream. Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes general protection faults. It appears the culprit is an incorrect argument to mon_free_buff: instead of passing the size of the current buffer being freed, the size of the new buffer is passed. Use the correct size argument to mon_free_buff when changing the size of the buffer. Signed-off-by: Steven Robertson <steven@strobe.cc> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: EHCI: remove PCI assumptionAlan Stern
commit ae68a83bdc1971cb02fefc7a686ba6d077065e71 upstream. This patch (as1405) fixes a small bug in ehci-hcd's isochronous scheduler. Not all EHCI controllers are PCI, and the code shouldn't assume that they are. Instead, introduce a special flag for controllers which need to delay iso scheduling for full-speed devices beyond the scheduling threshold. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: David Brownell <david-b@pacbell.net> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: musb: use correct register widths in register dumpsAnand Gadiyar
commit 0936fb5e92a90476959447ad8ae5d780afbbd930 upstream. DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit. Marking them as 16-bit in the table causes only the lower 16-bits to be dumped and this is misleading. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without ↵Uwe Kleine-König
<linux/spinlock.h> commit 868003ca7ad17ac6c1606dc36101f10a7825b399 upstream. This is a follow up to 14cb0de (arm/imx/gpio: add spinlock protection) and fixes the following build failure: CC arch/arm/mach-imx/pcm970-baseboard.o In file included from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:8, from arch/arm/mach-imx/pcm970-baseboard.c:20: arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-13ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a ↵Will Deacon
faulty ASID commit cdf357f1e13a08a11261edacb3083746f65c1ed9 upstream. On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by ASID match can result in the incorrect ASID being broadcast to other CPUs. As a consequence of this, the targetted TLB entries are not invalidated across the system. This workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. Tested-by: Rob Clark <rob@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13smsc911x: Add spinlocks around registers accessCatalin Marinas
commit 492c5d943d6a04b124ba3a719dc746dc36b14cfb upstream. On SMP systems, the SMSC911x registers may be accessed by multiple CPUs and this seems to put the chip in an inconsistent state. The patch adds spinlocks to the smsc911x_reg_read, smsc911x_reg_write, smsc911x_rx_readfifo and smsc911x_tx_writefifo functions. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13pxa/cm-x300: fix ffuart registrationIgor Grinberg
commit a6cd7eb374647b572ae9e7dbfe49871e6996e8e0 upstream. ffuart is available on cm-x300 only with pxa300. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13signalfd: fill in ssi_int for posix timers and message queuesNathan Lynch
commit a2a20c412c86e0bb46a9ab0dd31bcfe6d201b913 upstream. If signalfd is used to consume a signal generated by a POSIX interval timer or POSIX message queue, the ssi_int field does not reflect the data (sigevent->sigev_value) supplied to timer_create(2) or mq_notify(3). (The ssi_ptr field, however, is filled in.) This behavior differs from signalfd's treatment of sigqueue-generated signals -- see the default case in signalfd_copyinfo. It also gives results that differ from the case when a signal is handled conventionally via a sigaction-registered handler. So, set signalfd_siginfo->ssi_int in the remaining cases (__SI_TIMER, __SI_MESGQ) where ssi_ptr is set. akpm: a non-back-compatible change. Merge into -stable to minimise the number of kernels which are in the field and which miss this feature. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13bio, fs: update RWA_MASK, READA and SWRITE to match the corresponding ↵Tejun Heo
BIO_RW_* bits commit aca27ba9618276dd2f777bcd5a1419589ccf1ca8 upstream. Commit a82afdf (block: use the same failfast bits for bio and request) moved BIO_RW_* bits around such that they match up with REQ_* bits. Unfortunately, fs.h hard coded RW_MASK, RWA_MASK, READ, WRITE, READA and SWRITE as 0, 1, 2 and 3, and expected them to match with BIO_RW_* bits. READ/WRITE didn't change but BIO_RW_AHEAD was moved to bit 4 instead of bit 1, breaking RWA_MASK, READA and SWRITE. This patch updates RWA_MASK, READA and SWRITE such that they match the BIO_RW_* bits again. A follow up patch will update the definitions to directly use BIO_RW_* bits so that this kind of breakage won't happen again. Neil also spotted missing RWA_MASK conversion. Stable: The offending commit a82afdf was released with v2.6.32, so this patch should be applied to all kernels since then but it must _NOT_ be applied to kernels earlier than that. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-bisected-by: Vladislav Bolkhovitin <vst@vlnb.net> Root-caused-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13drbd: Disable delay probes for the upcomming releasePhilipp Reisner
commit 6710a5760355be8f2e51682f41b0d3fc76550309 upstream. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13drbd: Initialize all members of sync_conf to their defaults [Bugz 315]Philipp Reisner
commit 85f4cc17a62c3ac9edeaf120cdae7261df458053 upstream. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13fs/ecryptfs/file.c: introduce missing freeJulia Lawall
commit ceeab92971e8af05c1e81a4ff2c271124b55bb9b upstream. The comments in the code indicate that file_info should be released if the function fails. This releasing is done at the label out_free, not out. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = kmem_cache_zalloc(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return <+...x...+>; | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmem_cache_zalloc %s" % (p1[0].file,p1[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ecryptfs: release reference to lower mount if interpose failsLino Sanfilippo
commit 31f73bee3e170b7cabb35db9e2f4bf7919b9d036 upstream. In ecryptfs_lookup_and_interpose_lower() the lower mount is not decremented if allocation of a dentry info struct failed. As a result the lower filesystem cant be unmounted any more (since it is considered busy). This patch corrects the reference counting. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13eCryptfs: Handle ioctl calls with unlocked and compat functionsTyler Hicks
commit c43f7b8fb03be8bcc579bfc4e6ab70eac887ab55 upstream. Lower filesystems that only implemented unlocked_ioctl weren't being passed ioctl calls because eCryptfs only checked for lower_file->f_op->ioctl and returned -ENOTTY if it was NULL. eCryptfs shouldn't implement ioctl(), since it doesn't require the BKL. This patch introduces ecryptfs_unlocked_ioctl() and ecryptfs_compat_ioctl(), which passes the calls on to the lower file system. https://bugs.launchpad.net/ecryptfs/+bug/469664 Reported-by: James Dupin <james.dupin@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13blkdev: cgroup whitelist permission fixChris Wright
commit b7300b78d1a87625975a799a109a2f98d77757c8 upstream. The cgroup device whitelist code gets confused when trying to grant permission to a disk partition that is not currently open. Part of blkdev_open() includes __blkdev_get() on the whole disk. Basically, the only ways to reliably allow a cgroup access to a partition on a block device when using the whitelist are to 1) also give it access to the whole block device or 2) make sure the partition is already open in a different context. The patch avoids the cgroup check for the whole disk case when opening a partition. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662 Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Serge E. Hallyn <serue@us.ibm.com> Reported-by: Vivek Goyal <vgoyal@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Daniel P. Berrange" <berrange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Fix sget() race with failing mountAl Viro
commit 7a4dec53897ecd3367efb1e12fe8a4edc47dc0e9 upstream. If sget() finds a matching superblock being set up, it'll grab an active reference to it and grab s_umount. That's fine - we'll wait for completion of foofs_get_sb() that way. However, if said foofs_get_sb() fails we'll end up holding the halfway-created superblock. deactivate_locked_super() called by foofs_get_sb() will just unlock the sucker since we are holding another active reference to it. What we need is a way to tell if superblock has been successfully set up. Unfortunately, neither ->s_root nor the check for MS_ACTIVE quite fit. Cheap and easy way, suitable for backport: new flag set by the (only) caller of ->get_sb(). If that flag isn't present by the time sget() grabbed s_umount on preexisting superblock it has found, it's seeing a stillborn and should just bury it with deactivate_locked_super() (and repeat the search). Longer term we want to set that flag in ->get_sb() instances (and check for it to distinguish between "sget() found us a live sb" and "sget() has allocated an sb, we need to set it up" in there, instead of checking ->s_root as we do now). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ioat2: catch and recover from broken vtd configurations v6Dan Williams
commit 556ab45f9a775bfa4762bacc0a4afb5b44b067bc upstream. On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the incorrect iommu causing faults when the driver initializes. Add a quirk to catch this misconfiguration and try falling back to untranslated operation (which works in the MacPro3,1 case). Assuming there are other platforms with misconfigured iommus teach the ioatdma driver to treat initialization failures as non-fatal (just fail the driver load and emit a warning instead of triggering a BUG_ON). This can be classified as a boot regression since 2.6.32 on affected platforms since the ioatdma module did not autoload prior to that kernel. Acked-by: David Woodhouse <David.Woodhouse@intel.com> Reported-by: Chris Li <lkml@chrisli.org> Tested-by: Chris Li <lkml@chrisli.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13e100/e1000*/igb*/ixgb*: Add missing read memory barrierJeff Kirsher
commit 2d0bb1c1f4524befe9f0fcf0d0cd3081a451223f upstream. Based on patches from Sonny Rao and Milton Miller... Combined the patches to fix up clean_tx_irq and clean_rx_irq. The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. The bug can manifest as a data integrity issue (bad payload data) or as a BUG in skb_pull(). This was a nasty bug to hunt down, if people agree with the fix I think it's a candidate for stable. Previously Submitted to e1000-devel only for ixgbe http://marc.info/?l=e1000-devel&m=126593062701537&w=3 We've now seen this problem hit with other device drivers (e1000e mostly) So I'm resubmitting with fixes for other Intel Device Drivers with similar issues. CC: Milton Miller <miltonm@bga.com> CC: Anton Blanchard <anton@samba.org> CC: Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13md/raid10: fix deadlock with unaligned read during resyncNeilBrown
commit 51e9ac77035a3dfcb6fc0a88a0d80b6f99b5edb1 upstream. If the 'bio_split' path in raid10-read is used while resync/recovery is happening it is possible to deadlock. Fix this be elevating ->nr_waiting for the duration of both parts of the split request. This fixes a bug that has been present since 2.6.22 but has only started manifesting recently for unknown reasons. It is suitable for and -stable since then. Reported-by: Justin Bronder <jsbronder@gentoo.org> Tested-by: Justin Bronder <jsbronder@gentoo.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13md: fix another deadlock with removing sysfs attributes.NeilBrown
commit bb4f1e9d0e2ef93de8e36ca0f5f26625fcd70b7d upstream. Move the deletion of sysfs attributes from reconfig_mutex to open_mutex didn't really help as a process can try to take open_mutex while holding reconfig_mutex, so the same deadlock can happen, just requiring one more process to be involved in the chain. I looks like I cannot easily use locking to wait for the sysfs deletion to complete, so don't. The only things that we cannot do while the deletions are still pending is other things which can change the sysfs namespace: run, takeover, stop. Each of these can fail with -EBUSY. So set a flag while doing a sysfs deletion, and fail run, takeover, stop if that flag is set. This is suitable for 2.6.35.x Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13md: move revalidate_disk() back outside open_mutexDan Williams
commit 147e0b6a639ac581ca3bf627bedc3f4a6d3eca66 upstream. Commit b821eaa5 "md: remove ->changed and related code" moved revalidate_disk() under open_mutex, and lockdep noticed. [ INFO: possible circular locking dependency detected ] 2.6.32-mdadm-locking #1 ------------------------------------------------------- mdadm/3640 is trying to acquire lock: (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff811acecb>] revalidate_disk+0x5b/0x90 but task is already holding lock: (&mddev->open_mutex){+.+...}, at: [<ffffffffa055e07a>] do_md_stop+0x4a/0x4d0 [md_mod] which lock already depends on the new lock. It is suitable for 2.6.35.x Reported-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ide-cd: Do not access completed requests in the irq handlerBorislav Petkov
commit 110712828365ccafcc61a7f4db44c31ed4cf8793 upstream. ide_cd_error_cmd() can complete an erroneous request with leftover buffers. Signal this with its return value so that the request is not accessed after its completion in the irq handler and we oops. Signed-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>