AgeCommit message (Collapse)Author
2006-07-05[PATCH] CONFIG_WIRELESS_EXT is neccessary after allHorms
WARNING: /lib/modules/2.6.17-mm2/kernel/net/ieee80211/ieee80211.ko needs unknown symbol wireless_spy_update Someone removed the `#ifdef CONFIG_WIRELESS_EXT' from around the callsite in net/ieee80211/ieee80211_rx.c and didn't update Kconfig appropriately. The offending patchset seems to be 35c14b855f52c49e4f3d078b9532b056005ed321 which is tittled [PATCH] ieee80211: remove unnecessary CONFIG_WIRELESS_EXT checking After a quick look it seems that wireless_spy_update() lives in net/core/wirless.c, and that file is only compiled if CONFIG_WIRELESS_EXT is set. Perhaps this is Kconig work, but in the mean time here is a reversal of the recent change. Signed-Off-By: Horms <horms@verge.net.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] SoftMAC: Add network to ieee80211softmac_call_events when associate ↵Joseph Jezak
times out The ieee80211softmac_call_events function, when called with event type IEEE80211SOFTMAC_EVENT_ASSOCIATE_TIMEOUT should pass the network as the third parameter. This patch does that. Signed-off-by: Joseph Jezak <josejx@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] SoftMAC: Prevent multiple authentication attempts on the same networkJoseph Jezak
This patch addresses the "No queue exists" messages commonly seen during authentication and associating. These appear due to scheduling multiple authentication attempts on the same network. To prevent this, I added a flag to stop multiple authentication attempts by the association layer. I also added a check to the wx handler to see if we're connecting to a different network than the one already in progress. This scenario was causing multiple requests on the same network because the network BSSID was not being updated despite the fact that the ESSID changed. Signed-off-by: Joseph Jezak <josejx@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: enable shared key authenticationDaniel Drake
I recently patched softmac to enable shared key authentication. This small patch will enable crazy or unfortunate bcm43xx users to use this new capability. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] 2.6.17 missing a call to ieee80211softmac_capabilities from ↵Larry Finger
ieee80211softmac_assoc_req In commit ba9b28d19a3251bb1dfe6a6f8cc89b96fb85f683, routine ieee80211softmac_capabilities was added to ieee80211softmac_io.c. As denoted by its name, it completes the capabilities IE that is needed in the associate and reassociate requests sent to the AP. For at least one AP, the Linksys WRT54G V5, the capabilities field must set the 'short preamble' bit or the AP refuses to associate. In the commit noted above, there is a call to the new routine from ieee80211softmac_reassoc_req, but not from ieee80211softmac_assoc_req. This patch fixes that oversight. As noted in the subject, v2.6.17 is affected. My bcm43xx card had been unable to associate since I was forced to buy a new AP. I finally was able to get a packet dump and traced the problem to the capabilities info. Although I had heard that a patch was "floating around", I had not seen it before 2.6.17 was released. As this bug does not affect security and I seem to have the only AP affected by it, there should be no problem in leaving it for 2.6.18. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] Convert bcm43xx-softmac to use the ieee80211_is_valid_channel routineLarry Finger
The current version of bcm43xx-softmac uses local routines to check if a channel is valid. As noted in the comments, these routines do not take any regulatory information into account. This patch converts the code to use the equivalent routine in ieee80211, which is being converted to know about regulatory information. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] skb used after passing to netif_rx in net/ieee80211/ieee80211_rx.cEric Sesterhenn
this patch fixes coverity id #913. ieee80211_monitor_rx() passes the skb to netif_rx() and we should not reference it any longer. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] ieee80211: fix not allocating IV+ICV space when usingencryption in ↵Hong Liu
ieee80211_tx_frame We should preallocate IV+ICV space when encrypting the frame. Currently no problem shows up just because dev_alloc_skb aligns the data len to SMP_CACHE_BYTES which can be used for ICV. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: workaround init_board vs. IRQ raceMichael Buesch
Place the Init-vs-IRQ workaround before any card register access, because we might not have the wireless core mapped at all times in init. So this will result in a Machine Check caused by a bus error. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: use softmac-suggested TX rateDaniel Drake
Use Softmac-suggested TX ratecode: ieee80211softmac_suggest_txrate() Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] Add two PLX device IDsFaidon Liambotis
This patch adds device IDs for Symbol LA-4123 and Global Sun Tech GL24110P to the HostAP PLX driver. This is not tested with real hardware, but there is no reason why it shouldn't work. Please test. Signed-off-by: Faidon Liambotis <faidon@cube.gr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[netdrvr] use dev_xxx() printk helpers, rather than dev_printk(KERN_xxx, ...Jeff Garzik
Suggested by Jiri Slaby. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] Use dev_printk() when ethernet interface isn't availableJeff Garzik
For messages prior to register_netdev(), prefer dev_printk() because that prints out both our driver name and our [PCI | whatever] bus id. Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx, hamachi, ne2k-pci, ns83820, pci-skeleton, r8169. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] via-velocity: remove io_size struct member, it is invariantJeff Garzik
Replace io_size struct members with VELOCITY_IO_SIZE constant. Also, constify chip_info_table[]. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] via-velocity: misc. cleanupsJeff Garzik
- const-ify pci_device_id table - clean up pci_device_id table with PCI_DEVICE() - don't store internal pointer in pci_device_id table, use pci_device_id::driver_data as an integer index - use dev_printk() for messages where eth%d prefix is unavailable - formatting fixes Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] minor cleanups in Becker-derived driversJeff Garzik
- fealnx: convert #define to enum - fealnx, sundance: mark chip info table __devinitdata - fealnx: use dev_printk() during probe - fealnx: formatting cleanups - starfire: remove obsolete comment - sundance, via-rhine: add some whitespace where useful, in tables - sundance: prefer "{ }" table terminator - via-rhine: mark PCI probe table const Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] via-velocity: use netdev_priv() where appropriateJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] Remove Becker-template 'io_size' member, when invariantJeff Garzik
Becker-derived drivers often have the 'io_size' member in their chip info struct, indicating the minimum required size of the I/O resource (usually a PCI BAR). For many situations, this number is either constant or irrelevant (due to pci_iomap convenience behavior). This change removes the io_size invariant member, and replaces it with a compile-time constant. Drivers updated: fealnx, gt96100eth, winbond-840, yellowfin Additionally, - gt96100eth: unused 'drv_flags' removed from gt96100eth - winbond-840: unused struct match_info removed - winbond-840: mark pci_id_tbl[] const, __devinitdata Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] Remove Linux-specific changelogs from several Becker template driversJeff Garzik
When in-kernel net drivers branched from Donald Becker's vanilla driver set, in the days before BitKeeper and git, a driver changelog was maintained in the driver source code. These days, the kernel's changelog is far superior and much more accurate, so the in-driver changelogs are removed. Another relic of the Becker/kernel split was version numbering, using "foo-LKx.y.z" notation, resulting in weird version numbers like "1.17b-LK1.1.9". These drivers are for older hardware, and see few changes these days, so the version numbers were all bumped to something more simple. Finally, in xircom_tulip_cb specifically, an additional cleanup removes the always-enabled CARDBUS cpp macro. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] epic100: minor cleanupsJeff Garzik
- Remove in-source changelog, it's in the global kernel history. - convert silly and useless version to useful one - replace invariant pci_id_tbl[]::io_size uses with EPIC_TOTAL_SIZE - remove now-unused io_size member from pci_id_tbl[] - current kernel style prefers dev_printk() for the rare ethernet driver messages that cannot print an 'eth%d' prefix. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05Merge branch 'locks'Trond Myklebust
2006-07-05NFS: Optimise away an excessive GETATTR call when a file is symlinkedTrond Myklebust
In the case when compiling via a symlink tree, we want to ensure that the close-to-open GETATTR call is applied only to the final file, and not to the symlink. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05This fixes a panic doing the first READDIR or READDIRPLUS call when:Trond Myklebust
* the client is ia64 or any platform that actually implements flush_dcache_page(), and * the server returns fsinfo.dtpref >= client's PAGE_SIZE, and * the server does *not* return post-op attributes for the directory in the READDIR reply. Problem diagnosed by Greg Banks <gnb@melbourne.sgi.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05NFS: Fix NFS page_state usageTrond Myklebust
The introduction of the FLUSH_INVALIDATE argument to nfs_sync_inode_wait() does not clear the nr_unstable page state counter for pages that are being released. Also fix a longstanding similar bug when nfs_commit_list() fails. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05NLM,NFSv4: Wait on local locks before we put RPC calls on the wireTrond Myklebust
Use FL_ACCESS flag to test and/or wait for local locks before we try requesting a lock from the server Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05VFS: Add support for the FL_ACCESS flag to flock_lock_file()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05NFSv4: Ensure nfs4_lock_expired() caches delegated locksTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lockTrond Myklebust
Use the new behaviour of {flock,posix}_file_lock(F_UNLCK) to determine if we held a lock, and only send the RPC request to the server if this was the case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05VFS: Allow caller to determine if BSD or posix locks were actually freedTrond Myklebust
Change posix_lock_file_conf(), and flock_lock_file() so that if called with an F_UNLCK argument, and the FL_EXISTS flag they will indicate whether or not any locks were actually freed by returning 0 or -ENOENT. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-07-05Merge branch 'master' of /home/trondmy/kernel/linux-2.6/Trond Myklebust
2006-07-05[PATCH] Makefile typoAndreas Schwab
Fix a typo in the toplevel makefile. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-05[PATCH] powerpc: implement missing jiffies64_to_cputime64()David Woodhouse
asm-powerpc/cputime.h doesn't declare jiffies64_to_cputime64() or cputime64_sub(), and due to CONFIG_VIRT_CPU_ACCOUNTING it's not picking up the definition from asm-generic like x86-64 & friends do. Cc: Dave Jones <davej@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-05[PATCH] powerpc: Fix loss of interrupts with MPICBenjamin Herrenschmidt
With the new interrupt rework, an interrupt "host" map() callback can be called after the interrupt is already active. It's called again for an already mapped interrupt to allow changing the trigger setup, and currently this is not guarded with a test of wether the interrupt is requested or not. I plan to change some of this logic to be a bit less lenient against random reconfiguring of live interrupts but just not yet. The ported MPIC driver has a bug where when that happens, it will mask the interrupt. This changes it to preserve the previous masking of the interrupt instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-05[ARM] 3711/1: AT91 timer updateAndrew Victor
Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-05[ARM] 3709/1: pnx4008: convert to generic irq subsystemVitaly Wool
Patch from Vitaly Wool Convert pnx4008 chip support to use generic irq subsystem Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-05[ARM] 3710/1: AT91 Serial: Use GPIO APIAndrew Victor
Patch from Andrew Victor The AT91RM9200 errata work-around should be using the GPIO API and not accessing the PIO registers directly. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: Move workqueue exports to where the functions are defined. [CPUFREQ] Misc cleanups in ondemand. [CPUFREQ] Make ondemand sampling per CPU and remove the mutex usage in sampling path. [CPUFREQ] Add queue_delayed_work_on() interface for workqueues. [CPUFREQ] Remove slowdown from ondemand sampling path.
2006-07-04Fix up headers_install wrt devfs removalLinus Torvalds
No devfs_fs.h header any more.. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds
* git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
2006-07-04[PATCH] fix AB-BA deadlock inversion at cs46xx_dsp_remove_scbArjan van de Ven
There is a code sequence where the locking is substream->self_group.lock -> ins->scbs[index].lock substream->self_group.lock is interrupt safe, and taken from irq context as well (trace is snipped for brevity) so what can happen is cpu 0 cpu 1 user context user context take ins->scbs[index].lock without disabling interrupts get substream->self_group.lock (irqsafe) try to get ins->scbs[index].lock (spins) interrupt happens try to get substream->self_group.lock (spins) which is an obvious AB-BA deadlock fix is to just take the lock with _irqsafe Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04[PATCH] mthca: initialize send and receive queue locks separatelyZach Brown
mthca: initialize send and receive queue locks separately lockdep identifies a lock by the call site of its initialization. By initializing the send and receive queue locks in mthca_wq_init() we confuse lockdep. It warns that that the ordered acquiry of both locks in mthca_modify_qp() is recursive acquiry of one lock: ============================================= [ INFO: possible recursive locking detected ] --------------------------------------------- modprobe/1192 is trying to acquire lock: (&wq->lock){....}, at: [<f892b4db>] mthca_modify_qp+0x60/0xa7b [ib_mthca] but task is already holding lock: (&wq->lock){....}, at: [<f892b4ce>] mthca_modify_qp+0x53/0xa7b [ib_mthca] Initializing the locks separately in mthca_alloc_qp_common() stops the warning and will let lockdep enforce proper ordering on paths that acquire both locks. Signed-off-by: Zach Brown <zach.brown@oracle.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04[PATCH] Fix copying of pgdat array on each node for ia64 memory hotplugYasunori Goto
I found a bug in memory hot-add code for ia64. IA64's code has copies of pgdat's array on each node to reduce memory access over crossing node. This array is used by NODE_DATA() macro. When new node is hot-added, this pgdat's array should be updated and copied on new node too. However, I used for_each_online_node() in scatter_node_data() to copy it. This meant its array is not copied on new node. Because initialization of structures for new node was halfway, so online_node_map couldn't be set at this time. To copy arrays on new node, I changed it to check value of pgdat_list[] which is source array of copies. I tested this patch with my Memory Hotadd emulation on Tiger4. This patch is for 2.6.17-git20. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] uclinux: fix proc_task()/get_proc-task() namingGreg Ungerer
Fix changed name of proc_task() to get_proc_task(). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (44 commits) ACPI: remove function tracing macros from drivers/acpi/*.c ACPI: add support for Smart Battery ACPI: handle battery notify event on broken BIOS ACPI: handle AC notify event on broken BIOS ACPI: asus_acpi: add S1N WLED control ACPI: asus_acpi: correct M6N/M6R display nodes ACPI: asus_acpi: add S1N WLED control ACPI: asus_acpi: rework model detection ACPI: asus_acpi: support L5D ACPI: asus_acpi: handle internal Bluetooth / support W5A ACPI: asus_acpi: support A4G ACPI: asus_acpi: support W3400N ACPI: asus_acpi: LED display support ACPI: asus_acpi: support A3G ACPI: asus_acpi: misc cleanups ACPI: video: Remove unneeded acpi_handle from driver. ACPI: thermal: Remove unneeded acpi_handle from driver. ACPI: power: Remove unneeded acpi_handle from driver. ACPI: pci_root: Remove unneeded acpi_handle from driver. ACPI: pci_link: Remove unneeded acpi_handle from driver. ...
2006-07-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Ensure 8250_pci quirks are not marked __devinit [SERIAL] Convert fifosize to an unsigned int
2006-07-03Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix lh7a40x_udc.c [ARM] Fix warning in consistent.c [ARM] Fix warnings in arch/arm/kernel/setup.c [ARM] Fix ecard.c resource warnings. [ARM] Fix ISA IRQ resources [ARM] Fix bad asm instruction in proc-arm925.S [ARM] More missing proc-macros.S includes [ARM] 3708/2: fix SMP build after section ioremap changes
2006-07-03Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [JFFS2][XATTR] Fix memory leak in POSIX-ACL support fs/jffs2/: make 2 functions static [MTD] NAND: Fix broken sharpsl driver [JFFS2][XATTR] Fix xd->refcnt race condition MTD: kernel-doc fixes + additions MTD: fix all kernel-doc warnings [MTD] DOC: Fixup read functions and do a little cleanup
2006-07-03Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) [Bluetooth] Add RFCOMM role switch support [Bluetooth] Allow disabling of credit based flow control [Bluetooth] Small cleanup of the L2CAP source code [Bluetooth] Use real devices for host controllers [Bluetooth] Add platform device for virtual and serial devices [Bluetooth] Add automatic sniff mode support [Bluetooth] Correct SCO buffer size on request [Bluetooth] Add suspend/resume support to the HCI USB driver [Bluetooth] Use raw mode for the Frontline sniffer device [BRIDGE]: br_dump_ifinfo index fix [ATM]: add+use poison defines [NET]: add+use poison defines [IOAT]: fix kernel-doc in source files [IOAT]: fix header file kernel-doc [TG3]: Add ipv6 TSO feature [IPV6]: Fix ipv6 GSO payload length [TIPC] Fixed sk_buff panic caused by tipc_link_bundle_buf (REVISED) [NET]: Verify gso_type too in gso_segment [IPVS]: Add sysctl documentation [ROSE]: Try all routes when establishing a ROSE connections. ...
2006-07-03Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (57 commits) [SCSI] fix error handling in scsi_io_completion [SCSI] qla1280: fix section mismatch warnings [SCSI] mptsas: eliminate ghost devices [SCSI] qla2xxx: make some more functions static [SCSI] small whitespace cleanup for qlogic driver [SCSI] mptbase: mpt_interrupt should return IRQ_NONE [SCSI] mptsas: make two functions static [SCSI] sg.c: Fix bad error handling in [SCSI] 53c700: fix breakage caused by the autosense update [SCSI] iscsi: add async notification of session events [SCSI] iscsi: pass target nr to session creation [SCSI] iscsi: break up session creation into two stages [SCSI] iscsi: rm channel usage from iscsi [SCSI] iscsi: fix session refcouting [SCSI] iscsi: convert iscsi_tcp to new set/get param fns [SCSI] iscsi: convert iser to new set/get param fns [SCSI] iscsi: fixup set/get param functions [SCSI] iscsi: add target discvery event to transport class [SCSI] st: remove unused st_buffer.in_use [SCSI] atp870u: reduce huge stack usage ...
2006-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: introduce utsrelease.h kbuild: explicit turn off gcc stack-protector