1 files changed, 428 insertions, 0 deletions
diff --git a/sound/pci/echoaudio/mona_dsp.c b/sound/pci/echoaudio/mona_dsp.c
new file mode 100644
index 00000000000..c0b4bf0be7d
--- /dev/null
+++ b/sound/pci/echoaudio/mona_dsp.c
@@ -0,0 +1,428 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+			     const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	DE_INIT(("init_hw() - Mona\n"));
+	snd_assert((subdevice_id & 0xfff0) == MONA, return -ENODEV);
+
+	if ((err = init_dsp_comm_page(chip))) {
+		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = TRUE;
+	chip->input_clock_types =
+		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+	chip->digital_modes =
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+		ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+
+	/* Mona comes in both '301 and '361 flavors */
+	if (chip->device_id == DEVICE_ID_56361)
+		chip->dsp_code_to_load = &card_fw[FW_MONA_361_DSP];
+	else
+		chip->dsp_code_to_load = &card_fw[FW_MONA_301_DSP];
+
+	chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+	chip->professional_spdif = FALSE;
+	chip->digital_in_automute = TRUE;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = FALSE;
+
+	if ((err = init_line_levels(chip)) < 0)
+		return err;
+
+	err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+	snd_assert(err >= 0, return err);
+	err = set_professional_spdif(chip, TRUE);
+
+	DE_INIT(("init_hw done\n"));
+	return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+		clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+		clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+	return clock_bits;
+}
+
+
+
+/* Mona has an ASIC on the PCI card and another ASIC in the external box; 
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+	u32 control_reg;
+	int err;
+	const struct firmware *asic;
+
+	if (chip->asic_loaded)
+		return 0;
+
+	mdelay(10);
+
+	if (chip->device_id == DEVICE_ID_56361)
+		asic = &card_fw[FW_MONA_361_1_ASIC48];
+	else
+		asic = &card_fw[FW_MONA_301_1_ASIC48];
+
+	err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC, asic);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = asic;
+	mdelay(10);
+
+	/* Do the external one */
+	err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_EXTERNAL_ASIC,
+				&card_fw[FW_MONA_2_ASIC]);
+	if (err < 0)
+		return err;
+
+	mdelay(10);
+	err = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	   48 kHz, internal clock, S/PDIF RCA mode */
+	if (!err) {
+		control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
+		err = write_control_reg(chip, control_reg, TRUE);
+	}
+
+	return err;
+}
+
+
+
+/* Depending on what digital mode you want, Mona needs different ASICs
+loaded.  This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, char double_speed)
+{
+	const struct firmware *asic;
+	int err;
+
+	/* Check the clock detect bits to see if this is
+	a single-speed clock or a double-speed clock; load
+	a new ASIC if necessary. */
+	if (chip->device_id == DEVICE_ID_56361) {
+		if (double_speed)
+			asic = &card_fw[FW_MONA_361_1_ASIC96];
+		else
+			asic = &card_fw[FW_MONA_361_1_ASIC48];
+	} else {
+		if (double_speed)
+			asic = &card_fw[FW_MONA_301_1_ASIC96];
+		else
+			asic = &card_fw[FW_MONA_301_1_ASIC48];
+	}
+
+	if (asic != chip->asic_code) {
+		/* Load the desired ASIC */
+		err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+					asic);
+		if (err < 0)
+			return err;
+		chip->asic_code = asic;
+	}
+
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock;
+	const struct firmware *asic;
+	char force_write;
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		DE_ACT(("set_sample_rate: Cannot set sample rate - "
+			"clock not set to CLK_CLOCKININTERNAL\n"));
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		return 0;
+	}
+
+	/* Now, check to see if the required ASIC is loaded */
+	if (rate >= 88200) {
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EINVAL;
+		if (chip->device_id == DEVICE_ID_56361)
+			asic = &card_fw[FW_MONA_361_1_ASIC96];
+		else
+			asic = &card_fw[FW_MONA_301_1_ASIC96];
+	} else {
+		if (chip->device_id == DEVICE_ID_56361)
+			asic = &card_fw[FW_MONA_361_1_ASIC48];
+		else
+			asic = &card_fw[FW_MONA_301_1_ASIC48];
+	}
+
+	force_write = 0;
+	if (asic != chip->asic_code) {
+		int err;
+		/* Load the desired ASIC (load_asic_generic() can sleep) */
+		spin_unlock_irq(&chip->lock);
+		err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+					asic);
+		spin_lock_irq(&chip->lock);
+
+		if (err < 0)
+			return err;
+		chip->asic_code = asic;
+		force_write = 1;
+	}
+
+	/* Compute the new control register value */
+	clock = 0;
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_CLOCK_CLEAR_MASK;
+	control_reg &= GML_SPDIF_RATE_CLEAR_MASK;
+
+	switch (rate) {
+	case 96000:
+		clock = GML_96KHZ;
+		break;
+	case 88200:
+		clock = GML_88KHZ;
+		break;
+	case 48000:
+		clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100:
+		clock = GML_44KHZ;
+		/* Professional mode */
+		if (control_reg & GML_SPDIF_PRO_MODE)
+			clock |= GML_SPDIF_SAMPLE_RATE0;
+		break;
+	case 32000:
+		clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+			GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 22050:
+		clock = GML_22KHZ;
+		break;
+	case 16000:
+		clock = GML_16KHZ;
+		break;
+	case 11025:
+		clock = GML_11KHZ;
+		break;
+	case 8000:
+		clock = GML_8KHZ;
+		break;
+	default:
+		DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+		return -EINVAL;
+	}
+
+	control_reg |= clock;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+	chip->sample_rate = rate;
+	DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+
+	return write_control_reg(chip, control_reg, force_write);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+	int err;
+
+	DE_ACT(("set_input_clock:\n"));
+
+	/* Prevent two simultaneous calls to switch_asic() */
+	if (atomic_read(&chip->opencount))
+		return -EAGAIN;
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		GML_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		DE_ACT(("Set Mona clock to INTERNAL\n"));
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		spin_unlock_irq(&chip->lock);
+		err = switch_asic(chip, clocks_from_dsp &
+				  GML_CLOCK_DETECT_BIT_SPDIF96);
+		spin_lock_irq(&chip->lock);
+		if (err < 0)
+			return err;
+		DE_ACT(("Set Mona clock to SPDIF\n"));
+		control_reg |= GML_SPDIF_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_WORD:
+		DE_ACT(("Set Mona clock to WORD\n"));
+		spin_unlock_irq(&chip->lock);
+		err = switch_asic(chip, clocks_from_dsp &
+				  GML_CLOCK_DETECT_BIT_WORD96);
+		spin_lock_irq(&chip->lock);
+		if (err < 0)
+			return err;
+		control_reg |= GML_WORD_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ADAT:
+		DE_ACT(("Set Mona clock to ADAT\n"));
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_ADAT_CLOCK;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	default:
+		DE_ACT(("Input clock 0x%x not supported for Mona\n", clock));
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = FALSE;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = TRUE;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = TRUE;
+		break;
+	default:
+		DE_ACT(("Digital mode not supported: %d\n", mode));
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&chip->lock);
+
+	if (incompatible_clock) {	/* Switch to 48KHz, internal */
+		chip->sample_rate = 48000;
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+	}
+
+	/* Clear the current digital mode */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+	/* Tweak the control reg */
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= GML_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* GML_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		/* If the current ASIC is the 96KHz ASIC, switch the ASIC
+		   and set to 48 KHz */
+		if (chip->asic_code == &card_fw[FW_MONA_361_1_ASIC96] ||
+		    chip->asic_code == &card_fw[FW_MONA_301_1_ASIC96]) {
+			set_sample_rate(chip, 48000);
+		}
+		control_reg |= GML_ADAT_MODE;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, FALSE);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	DE_ACT(("set_digital_mode to %d\n", mode));
+	return incompatible_clock;
+}