diff options
Diffstat (limited to 'drivers/ide/pci/atiixp.c')
| -rw-r--r-- | drivers/ide/pci/atiixp.c | 115 |
1 files changed, 18 insertions, 97 deletions
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 0eb97f021d3..ef8e0164ef7 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/atiixp.c Version 0.02 Jun 16 2007 + * linux/drivers/ide/pci/atiixp.c Version 0.03 Aug 3 2007 * * Copyright (C) 2003 ATI Inc. <hyu@ati.com> * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz @@ -47,43 +47,6 @@ static int save_mdma_mode[4]; static DEFINE_SPINLOCK(atiixp_lock); -/** - * atiixp_dma_2_pio - return the PIO mode matching DMA - * @xfer_rate: transfer speed - * - * Returns the nearest equivalent PIO timing for the PIO or DMA - * mode requested by the controller. - */ - -static u8 atiixp_dma_2_pio(u8 xfer_rate) { - switch(xfer_rate) { - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - case XFER_MW_DMA_2: - case XFER_PIO_4: - return 4; - case XFER_MW_DMA_1: - case XFER_PIO_3: - return 3; - case XFER_SW_DMA_2: - case XFER_PIO_2: - return 2; - case XFER_MW_DMA_0: - case XFER_SW_DMA_1: - case XFER_SW_DMA_0: - case XFER_PIO_1: - case XFER_PIO_0: - case XFER_PIO_SLOW: - default: - return 0; - } -} - static void atiixp_dma_host_on(ide_drive_t *drive) { struct pci_dev *dev = drive->hwif->pci_dev; @@ -169,7 +132,9 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; u32 tmp32; u16 tmp16; - u8 pio; + + if (speed < XFER_MW_DMA_0) + return; spin_lock_irqsave(&atiixp_lock, flags); @@ -191,34 +156,6 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) } spin_unlock_irqrestore(&atiixp_lock, flags); - - if (speed >= XFER_SW_DMA_0) - pio = atiixp_dma_2_pio(speed); - else - pio = speed - XFER_PIO_0; - - atiixp_set_pio_mode(drive, pio); -} - -/** - * atiixp_dma_check - set up an IDE device - * @drive: IDE drive to configure - * - * Set up the ATIIXP interface for the best available speed on this - * interface, preferring DMA to PIO. - */ - -static int atiixp_dma_check(ide_drive_t *drive) -{ - drive->init_speed = 0; - - if (ide_tune_dma(drive)) - return 0; - - if (ide_use_fast_pio(drive)) - ide_set_max_pio(drive); - - return -1; } /** @@ -235,23 +172,12 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) u8 ch = hwif->channel; struct pci_dev *pdev = hwif->pci_dev; - if (!hwif->irq) - hwif->irq = ch ? 15 : 14; - - hwif->autodma = 0; hwif->set_pio_mode = &atiixp_set_pio_mode; hwif->set_dma_mode = &atiixp_set_dma_mode; - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; if (!hwif->dma_base) return; - hwif->atapi_dma = 1; - hwif->ultra_mask = 0x3f; - hwif->mwdma_mask = 0x06; - hwif->swdma_mask = 0x04; - pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) @@ -261,31 +187,26 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->dma_host_on = &atiixp_dma_host_on; hwif->dma_host_off = &atiixp_dma_host_off; - hwif->ide_dma_check = &atiixp_dma_check; - if (!noautodma) - hwif->autodma = 1; - - hwif->drives[1].autodma = hwif->autodma; - hwif->drives[0].autodma = hwif->autodma; } - -static ide_pci_device_t atiixp_pci_info[] __devinitdata = { +static const struct ide_port_info atiixp_pci_info[] __devinitdata = { { /* 0 */ .name = "ATIIXP", .init_hwif = init_hwif_atiixp, - .autodma = AUTODMA, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, - .bootable = ON_BOARD, + .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, },{ /* 1 */ .name = "SB600_PATA", .init_hwif = init_hwif_atiixp, - .autodma = AUTODMA, .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, - .bootable = ON_BOARD, - .host_flags = IDE_HFLAG_SINGLE, + .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS | + IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, }, }; @@ -303,12 +224,12 @@ static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_devic return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]); } -static struct pci_device_id atiixp_pci_tbl[] = { - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +static const struct pci_device_id atiixp_pci_tbl[] = { + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); |