aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev/i8259.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/sysdev/i8259.c')
-rw-r--r--arch/powerpc/sysdev/i8259.c141
1 files changed, 112 insertions, 29 deletions
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index c2e9465871a..72c73a6105c 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -6,11 +6,16 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#undef DEBUG
+
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/i8259.h>
+#include <asm/prom.h>
static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
@@ -20,7 +25,8 @@ static unsigned char cached_8259[2] = { 0xff, 0xff };
static DEFINE_SPINLOCK(i8259_lock);
-static int i8259_pic_irq_offset;
+static struct device_node *i8259_node;
+static struct irq_host *i8259_host;
/*
* Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -28,16 +34,18 @@ static int i8259_pic_irq_offset;
* which is called. It should be noted that polling is broken on some
* IBM and Motorola PReP boxes so we must use the int-ack feature on them.
*/
-int i8259_irq(struct pt_regs *regs)
+unsigned int i8259_irq(struct pt_regs *regs)
{
int irq;
-
- spin_lock(&i8259_lock);
+ int lock = 0;
/* Either int-ack or poll for the IRQ */
if (pci_intack)
irq = readb(pci_intack);
else {
+ spin_lock(&i8259_lock);
+ lock = 1;
+
/* Perform an interrupt acknowledge cycle on controller 1. */
outb(0x0C, 0x20); /* prepare for poll */
irq = inb(0x20) & 7;
@@ -62,11 +70,13 @@ int i8259_irq(struct pt_regs *regs)
if (!pci_intack)
outb(0x0B, 0x20); /* ISR register */
if(~inb(0x20) & 0x80)
- irq = -1;
- }
+ irq = NO_IRQ;
+ } else if (irq == 0xff)
+ irq = NO_IRQ;
- spin_unlock(&i8259_lock);
- return irq + i8259_pic_irq_offset;
+ if (lock)
+ spin_unlock(&i8259_lock);
+ return irq;
}
static void i8259_mask_and_ack_irq(unsigned int irq_nr)
@@ -74,7 +84,6 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr)
unsigned long flags;
spin_lock_irqsave(&i8259_lock, flags);
- irq_nr -= i8259_pic_irq_offset;
if (irq_nr > 7) {
cached_A1 |= 1 << (irq_nr-8);
inb(0xA1); /* DUMMY */
@@ -100,8 +109,9 @@ static void i8259_mask_irq(unsigned int irq_nr)
{
unsigned long flags;
+ pr_debug("i8259_mask_irq(%d)\n", irq_nr);
+
spin_lock_irqsave(&i8259_lock, flags);
- irq_nr -= i8259_pic_irq_offset;
if (irq_nr < 8)
cached_21 |= 1 << irq_nr;
else
@@ -114,8 +124,9 @@ static void i8259_unmask_irq(unsigned int irq_nr)
{
unsigned long flags;
+ pr_debug("i8259_unmask_irq(%d)\n", irq_nr);
+
spin_lock_irqsave(&i8259_lock, flags);
- irq_nr -= i8259_pic_irq_offset;
if (irq_nr < 8)
cached_21 &= ~(1 << irq_nr);
else
@@ -152,25 +163,84 @@ static struct resource pic_edgectrl_iores = {
.flags = IORESOURCE_BUSY,
};
-static struct irqaction i8259_irqaction = {
- .handler = no_action,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "82c59 secondary cascade",
+static int i8259_host_match(struct irq_host *h, struct device_node *node)
+{
+ return i8259_node == NULL || i8259_node == node;
+}
+
+static int i8259_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
+
+ /* We block the internal cascade */
+ if (hw == 2)
+ get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+
+ /* We use the level stuff only for now, we might want to
+ * be more cautious here but that works for now
+ */
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
+ return 0;
+}
+
+static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
+{
+ /* Make sure irq is masked in hardware */
+ i8259_mask_irq(virq);
+
+ /* remove chip and handler */
+ set_irq_chip_and_handler(virq, NULL, NULL);
+
+ /* Make sure it's completed */
+ synchronize_irq(virq);
+}
+
+static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+ static unsigned char map_isa_senses[4] = {
+ IRQ_TYPE_LEVEL_LOW,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_EDGE_RISING,
+ };
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1 && intspec[1] < 4)
+ *out_flags = map_isa_senses[intspec[1]];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+
+ return 0;
+}
+
+static struct irq_host_ops i8259_host_ops = {
+ .match = i8259_host_match,
+ .map = i8259_host_map,
+ .unmap = i8259_host_unmap,
+ .xlate = i8259_host_xlate,
};
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- * the active irq from the 8259
+/****
+ * i8259_init - Initialize the legacy controller
+ * @node: device node of the legacy PIC (can be NULL, but then, it will match
+ * all interrupts, so beware)
+ * @intack_addr: PCI interrupt acknowledge (real) address which will return
+ * the active irq from the 8259
*/
-void __init i8259_init(unsigned long intack_addr, int offset)
+void i8259_init(struct device_node *node, unsigned long intack_addr)
{
unsigned long flags;
- int i;
+ /* initialize the controller */
spin_lock_irqsave(&i8259_lock, flags);
- i8259_pic_irq_offset = offset;
+
+ /* Mask all first */
+ outb(0xff, 0xA1);
+ outb(0xff, 0x21);
/* init master interrupt controller */
outb(0x11, 0x20); /* Start init sequence */
@@ -184,24 +254,36 @@ void __init i8259_init(unsigned long intack_addr, int offset)
outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
outb(0x01, 0xA1); /* Select 8086 mode */
+ /* That thing is slow */
+ udelay(100);
+
/* always read ISR */
outb(0x0B, 0x20);
outb(0x0B, 0xA0);
- /* Mask all interrupts */
+ /* Unmask the internal cascade */
+ cached_21 &= ~(1 << 2);
+
+ /* Set interrupt masks */
outb(cached_A1, 0xA1);
outb(cached_21, 0x21);
spin_unlock_irqrestore(&i8259_lock, flags);
- for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
- set_irq_chip_and_handler(offset + i, &i8259_pic,
- handle_level_irq);
- irq_desc[offset + i].status |= IRQ_LEVEL;
+ /* create a legacy host */
+ if (node)
+ i8259_node = of_node_get(node);
+ i8259_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &i8259_host_ops, 0);
+ if (i8259_host == NULL) {
+ printk(KERN_ERR "i8259: failed to allocate irq host !\n");
+ return;
}
/* reserve our resources */
- setup_irq(offset + 2, &i8259_irqaction);
+ /* XXX should we continue doing that ? it seems to cause problems
+ * with further requesting of PCI IO resources for that range...
+ * need to look into it.
+ */
request_resource(&ioport_resource, &pic1_iores);
request_resource(&ioport_resource, &pic2_iores);
request_resource(&ioport_resource, &pic_edgectrl_iores);
@@ -209,4 +291,5 @@ void __init i8259_init(unsigned long intack_addr, int offset)
if (intack_addr != 0)
pci_intack = ioremap(intack_addr, 1);
+ printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
}