aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2410/Kconfig')
-rw-r--r--arch/arm/mach-s3c2410/Kconfig169
1 files changed, 169 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
new file mode 100644
index 00000000000..534df0c6c77
--- /dev/null
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -0,0 +1,169 @@
+if ARCH_S3C2410
+
+menu "S3C24XX Implementations"
+
+config ARCH_BAST
+ bool "Simtec Electronics BAST (EB2410ITX)"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Simtec Electronics EB2410ITX
+ development board (also known as BAST)
+
+ Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
+
+config ARCH_H1940
+ bool "IPAQ H1940"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the HP IPAQ H1940
+
+ <http://www.handhelds.org/projects/h1940.html>.
+
+config MACH_N30
+ bool "Acer N30"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Acer N30
+
+ <http://zoo.weinigel.se/n30>.
+
+config ARCH_SMDK2410
+ bool "SMDK2410/A9M2410"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the SMDK2410 or the derived module A9M2410
+ <http://www.fsforth.de>
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the SMDK2440.
+
+config MACH_VR1000
+ bool "Thorcom VR1000"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Thorcom VR1000 board.
+
+ This linux port is currently being maintained by Simtec, on behalf
+ of Thorcom. Any queries, please contact Thorcom first.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+ See <http://www.handhelds.org/projects/rx3715.html> for more
+ information on this project
+
+config MACH_OTOM
+ bool "NexVision OTOM Board"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+endmenu
+
+config CPU_S3C2410
+ bool
+ depends on ARCH_S3C2410
+ help
+ Support for S3C2410 and S3C2410A family from the S3C24XX line
+ of Samsung Mobile CPUs.
+
+config CPU_S3C2440
+ bool
+ depends on ARCH_S3C2410
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+comment "S3C2410 Boot"
+
+config S3C2410_BOOT_WATCHDOG
+ bool "S3C2410 Initialisation watchdog"
+ depends on ARCH_S3C2410 && S3C2410_WATCHDOG
+ help
+ Say y to enable the watchdog during the kernel decompression
+ stage. If the kernel fails to uncompress, then the watchdog
+ will trigger a reset and the system should restart.
+
+ Although this uses the same hardware unit as the kernel watchdog
+ driver, it is not a replacement for it. If you use this option,
+ you will have to use the watchdg driver to either stop the timeout
+ or restart it. If you do not, then your kernel will reboot after
+ startup.
+
+ The driver uses a fixed timeout value, so the exact time till the
+ system resets depends on the value of PCLK. The timeout on an
+ 200MHz s3c2410 should be about 30 seconds.
+
+comment "S3C2410 Setup"
+
+config S3C2410_DMA
+ bool "S3C2410 DMA support"
+ depends on ARCH_S3C2410
+ help
+ S3C2410 DMA support. This is needed for drivers like sound which
+ use the S3C2410's DMA system to move data to and from the
+ peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+ bool "S3C2410 DMA support debug"
+ depends on ARCH_S3C2410 && S3C2410_DMA
+ help
+ Enable debugging output for the DMA code. This option sends info
+ to the kernel log, at priority KERN_DEBUG.
+
+ Note, it is easy to create and fill the log buffer in a small
+ amount of time, as well as using an significant percentage of
+ the CPU time doing so.
+
+
+config S3C2410_PM_DEBUG
+ bool "S3C2410 PM Suspend debug"
+ depends on ARCH_S3C2410 && PM
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+ for more information.
+
+config S3C2410_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on ARCH_S3C2410 && PM && CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but wil identify any
+ faults with better precision.
+
+config S3C2410_LOWLEVEL_UART_PORT
+ int "S3C2410 UART to use for low-level messages"
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+ Note, this does not affect the port used by the debug messages,
+ which is a separate configuration.
+
+endif