aboutsummaryrefslogtreecommitdiff
path: root/Documentation/video4linux/bttv
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/video4linux/bttv')
-rw-r--r--Documentation/video4linux/bttv/CONTRIBUTORS25
-rw-r--r--Documentation/video4linux/bttv/Cards964
-rw-r--r--Documentation/video4linux/bttv/ICs37
-rw-r--r--Documentation/video4linux/bttv/Insmod-options173
-rw-r--r--Documentation/video4linux/bttv/MAKEDEV28
-rw-r--r--Documentation/video4linux/bttv/Modprobe.conf11
-rw-r--r--Documentation/video4linux/bttv/Modules.conf14
-rw-r--r--Documentation/video4linux/bttv/PROBLEMS62
-rw-r--r--Documentation/video4linux/bttv/README90
-rw-r--r--Documentation/video4linux/bttv/README.WINVIEW33
-rw-r--r--Documentation/video4linux/bttv/README.freeze74
-rw-r--r--Documentation/video4linux/bttv/README.quirks83
-rw-r--r--Documentation/video4linux/bttv/Sound-FAQ148
-rw-r--r--Documentation/video4linux/bttv/Specs3
-rw-r--r--Documentation/video4linux/bttv/THANKS24
-rw-r--r--Documentation/video4linux/bttv/Tuners115
16 files changed, 1884 insertions, 0 deletions
diff --git a/Documentation/video4linux/bttv/CONTRIBUTORS b/Documentation/video4linux/bttv/CONTRIBUTORS
new file mode 100644
index 00000000000..aef49db8847
--- /dev/null
+++ b/Documentation/video4linux/bttv/CONTRIBUTORS
@@ -0,0 +1,25 @@
+Contributors to bttv:
+
+Michael Chu <mmchu@pobox.com>
+ AverMedia fix and more flexible card recognition
+
+Alan Cox <alan@redhat.com>
+ Video4Linux interface and 2.1.x kernel adaptation
+
+Chris Kleitsch
+ Hardware I2C
+
+Gerd Knorr <kraxel@cs.tu-berlin.de>
+ Radio card (ITT sound processor)
+
+bigfoot <bigfoot@net-way.net>
+Ragnar Hojland Espinosa <ragnar@macula.net>
+ ConferenceTV card
+
+
++ many more (please mail me if you are missing in this list and would
+ like to be mentioned)
+
+
+
+
diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards
new file mode 100644
index 00000000000..7f8c7eb70ab
--- /dev/null
+++ b/Documentation/video4linux/bttv/Cards
@@ -0,0 +1,964 @@
+
+Gunther Mayer's bttv card gallery (graphical version of this text file :-)
+is available at: http://www.bttv-gallery.de/
+
+
+Supported cards:
+Bt848/Bt848a/Bt849/Bt878/Bt879 cards
+------------------------------------
+
+All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal
+Composite/S-VHS inputs are supported. Teletext and Intercast support
+(PAL only) for ALL cards via VBI sample decoding in software.
+
+Some cards with additional multiplexing of inputs or other additional
+fancy chips are only partially supported (unless specifications by the
+card manufacturer are given). When a card is listed here it isn't
+necessarily fully supported.
+
+All other cards only differ by additional components as tuners, sound
+decoders, EEPROMs, teletext decoders ...
+
+
+Unsupported Cards:
+------------------
+
+Cards with Zoran (ZR) or Philips (SAA) or ISA are not supported by
+this driver.
+
+
+MATRIX Vision
+-------------
+
+MV-Delta
+- Bt848A
+- 4 Composite inputs, 1 S-VHS input (shared with 4th composite)
+- EEPROM
+
+http://www.matrix-vision.de/
+
+This card has no tuner but supports all 4 composite (1 shared with an
+S-VHS input) of the Bt848A.
+Very nice card if you only have satellite TV but several tuners connected
+to the card via composite.
+
+Many thanks to Matrix-Vision for giving us 2 cards for free which made
+Bt848a/Bt849 single crytal operation support possible!!!
+
+
+
+Miro/Pinnacle PCTV
+------------------
+
+- Bt848
+ some (all??) come with 2 crystals for PAL/SECAM and NTSC
+- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
+- MSP34xx sound decoder on add on board
+ decoder is supported but AFAIK does not yet work
+ (other sound MUX setting in GPIO port needed??? somebody who fixed this???)
+- 1 tuner, 1 composite and 1 S-VHS input
+- tuner type is autodetected
+
+http://www.miro.de/
+http://www.miro.com/
+
+
+Many thanks for the free card which made first NTSC support possible back
+in 1997!
+
+
+Hauppauge Win/TV pci
+--------------------
+
+There are many different versions of the Hauppauge cards with different
+tuners (TV+Radio ...), teletext decoders.
+Note that even cards with same model numbers have (depending on the revision)
+different chips on it.
+
+- Bt848 (and others but always in 2 crystal operation???)
+ newer cards have a Bt878
+- PAL, SECAM, NTSC or tuner with or without Radio support
+
+e.g.:
+ PAL:
+ TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+ TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
+
+ NTSC:
+ TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+ TSA5518: no datasheet available on Philips site
+- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
+ with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
+ SAA5246 (I2C 0x22) is supported
+- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
+ with configuration information
+ I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
+- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
+- 14052B: mux for selection of sound source
+- sound decoder: TDA9800, MSP34xx (stereo cards)
+
+
+Askey CPH-Series
+----------------
+Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
+
+ Card series:
+ CPH01x: BT848 capture only
+ CPH03x: BT848
+ CPH05x: BT878 with FM
+ CPH06x: BT878 (w/o FM)
+ CPH07x: BT878 capture only
+
+ TV standards:
+ CPH0x0: NTSC-M/M
+ CPH0x1: PAL-B/G
+ CPH0x2: PAL-I/I
+ CPH0x3: PAL-D/K
+ CPH0x4: SECAM-L/L
+ CPH0x5: SECAM-B/G
+ CPH0x6: SECAM-D/K
+ CPH0x7: PAL-N/N
+ CPH0x8: PAL-B/H
+ CPH0x9: PAL-M/M
+
+ CPH03x was often sold as "TV capturer".
+
+ Identifying:
+ 1) 878 cards can be identified by PCI Subsystem-ID:
+ 144f:3000 = CPH06x
+ 144F:3002 = CPH05x w/ FM
+ 144F:3005 = CPH06x_LC (w/o remote control)
+ 1) The cards have a sticker with "CPH"-model on the back.
+ 2) These cards have a number printed on the PCB just above the tuner metal box:
+ "80-CP2000300-x" = CPH03X
+ "80-CP2000500-x" = CPH05X
+ "80-CP2000600-x" = CPH06X / CPH06x_LC
+
+ Askey sells these cards as "Magic TView series", Brand "MagicXpress".
+ Other OEM often call these "Tview", "TView99" or else.
+
+Lifeview Flyvideo Series:
+-------------------------
+ The naming of these series differs in time and space.
+
+ Identifying:
+ 1) Some models can be identified by PCI subsystem ID:
+ 1852:1852 = Flyvideo 98 FM
+ 1851:1850 = Flyvideo 98
+ 1851:1851 = Flyvideo 98 EZ (capture only)
+ 2) There is a print on the PCB:
+ LR25 = Flyvideo (Zoran ZR36120, SAA7110A)
+ LR26 Rev.N = Flyvideo II (Bt848)
+ Rev.O = Flyvideo II (Bt878)
+ LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110)
+ LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only)
+ LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID)
+ Rev.W = Flyvideo 98 (no eeprom)
+ LR51 Rev.E = Flyvideo 98 EZ (capture only)
+ LR90 = Flyvideo 2000 (Bt878)
+ Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard)
+ LR91 = Stereo daughter card for LR90
+ LR97 = Flyvideo DVBS
+ LR99 Rev.E = Low profile card for OEM integration (only internal audio!) bt878
+ LR136 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134)
+ LR137 = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394)
+ LR138 Rev.C= Flyvideo 2000 (SAA7130)
+ or Flyvideo 3000 (SAA7134) w/Stereo TV
+ These exist in variations w/FM and w/Remote sometimes denoted
+ by suffixes "FM" and "R".
+ 3) You have a laptop (miniPCI card):
+ Product = FlyTV Platinum Mini
+ Model/Chip = LR212/saa7135
+
+ Lifeview.com.tw states (Feb. 2002):
+ "The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
+ Their Bt8x8 cards are listed as discontinued.
+ Flyvideo 2000S was probably sold as Flyvideo 3000 in some contries(Europe?).
+ The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
+
+ "Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
+ this name is re-used for LR50 Rev.W.
+ The Lifeview website mentioned Flyvideo III at some time, but such a card
+ has not yet been seen (perhaps it was the german name for LR90 [stereo]).
+ These cards are sold by many OEMs too.
+
+ FlyVideo A2 (Elta 8680)= LR90 Rev.F (w/Remote, w/o FM, stereo TV by tda9821) {Germany}
+ Lifeview 3000 (Elta 8681) as sold by Plus(April 2002), Germany = LR138 w/ saa7134
+
+
+Typhoon TV card series:
+-----------------------
+ These can be CPH, Flyvideo, Pixelview or KNC1 series.
+ Typhoon is the brand of Anubis.
+ Model 50680 got re-used, some model no. had different contents over time.
+
+ Models:
+ 50680 "TV Tuner PCI Pal BG"(old,red package)=can be CPH03x(bt848) or CPH06x(bt878)
+ 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B)
+ 50681 "TV Tuner PCI Pal I" (variant of 50680)
+ 50682 "TView TV/FM Tuner Pal BG" = Flyvideo 98FM (LR50 Rev.Q)
+ Note: The package has a picture of CPH05x (which would be a real TView)
+ 50683 "TV Tuner PCI SECAM" (variant of 50680)
+ 50684 "TV Tuner Pal BG" = Pixelview 878TV(Rev.3D)
+ 50686 "TV Tuner" = KNC1 TV Station
+ 50687 "TV Tuner stereo" = KNC1 TV Station pro
+ 50688 "TV Tuner RDS" (black package) = KNC1 TV Station RDS
+ 50689 TV SAT DVB-S CARD CI PCI (SAA7146AH, SU1278?) = "KNC1 TV Station DVB-S"
+ 50692 "TV/FM Tuner" (small PCB)
+ 50694 TV TUNER CARD RDS (PHILIPS CHIPSET SAA7134HL)
+ 50696 TV TUNER STEREO (PHILIPS CHIPSET SAA7134HL, MK3ME Tuner)
+ 50804 PC-SAT TV/Audio Karte = Techni-PC-Sat (ZORAN 36120PQC, Tuner:Alps)
+ 50866 TVIEW SAT RECEIVER+ADR
+ 50868 "TV/FM Tuner Pal I" (variant of 50682)
+ 50999 "TV/FM Tuner Secam" (variant of 50682)
+
+
+Guillemot
+---------
+ Maxi-TV PCI (ZR36120)
+ Maxi TV Video 2 = LR50 Rev.Q (FI1216MF, PAL BG+SECAM)
+ Maxi TV Video 3 = CPH064 (PAL BG + SECAM)
+
+Mentor
+------
+ Mentor TV card ("55-878TV-U1") = Pixelview 878TV(Rev.3F) (w/FM w/Remote)
+
+Prolink
+-------
+ TV cards:
+ PixelView Play TV pro - (Model: PV-BT878P+ REV 8E)
+ PixelView Play TV pro - (Model: PV-BT878P+ REV 9D)
+ PixelView Play TV pro - (Model: PV-BT878P+ REV 4C / 8D / 10A )
+ PixelView Play TV - (Model: PV-BT848P+)
+ 878TV - (Model: PV-BT878TV)
+
+ Multimedia TV packages (card + software pack):
+ PixelView Play TV Theater - (Model: PV-M4200) = PixelView Play TV pro + Software
+ PixelView Play TV PAK - (Model: PV-BT878P+ REV 4E)
+ PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A )
+ PixelView Studio PAK - (Model: M2200 REV 4C / 8D / 10A )
+ PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
+ PixelView DigitalVCR PAK - (Model: PV-M2400 REV 4C / 8D / 10A )
+
+ PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800
+ PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
+ PixelView PlayTV DVR PV-M4600 package contents:PixelView PlayTV pro, windvr & videoMail s/w
+
+ Further Cards:
+ PV-BT878P+rev.9B (Play TV Pro, opt. w/FM w/NICAM)
+ PV-BT878P+rev.2F
+ PV-BT878P Rev.1D (bt878, capture only)
+
+ XCapture PV-CX881P (cx23881)
+ PlayTV HD PV-CX881PL+, PV-CX881PL+(w/FM) (cx23881)
+
+ DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
+ DTV2000 DVB-S = Twinhan VP-1020
+
+ Video Conferencing:
+ PixelView Meeting PAK - (Model: PV-BT878P)
+ PixelView Meeting PAK Lite - (Model: PV-BT878P)
+ PixelView Meeting PAK plus - (Model: PV-BT878P+rev 4C/8D/10A)
+ PixelView Capture - (Model: PV-BT848P)
+
+ PixelView PlayTV USB pro
+ Model No. PV-NT1004+, PV-NT1004+ (w/FM) = NT1004 USB decoder chip + SAA7113 video decoder chip
+
+Dynalink
+--------
+ These are CPH series.
+
+Phoebemicro
+-----------
+ TV Master = CPH030 or CPH060
+ TV Master FM = CPH050
+
+Genius/Kye
+----------
+ Video Wonder/Genius Internet Video Kit = LR37 Rev.C
+ Video Wonder Pro II (848 or 878) = LR26
+
+Tekram
+------
+ VideoCap C205 (Bt848)
+ VideoCap C210 (zr36120 +Philips)
+ CaptureTV M200 (ISA)
+ CaptureTV M205 (Bt848)
+
+Lucky Star
+----------
+ Image World Conference TV = LR50 Rev. Q
+
+Leadtek
+-------
+ WinView 601 (Bt848)
+ WinView 610 (Zoran)
+ WinFast2000
+ WinFast2000 XP
+
+KNC One
+-------
+ TV-Station
+ TV-Station SE (+Software Bundle)
+ TV-Station pro (+TV stereo)
+ TV-Station FM (+Radio)
+ TV-Station RDS (+RDS)
+ TV Station SAT (analog satellite)
+ TV-Station DVB-S
+
+ newer Cards have saa7134, but model name stayed the same?
+
+Provideo
+--------
+ PV951 or PV-951 (also are sold as:
+ Boeder TV-FM Video Capture Card
+ Titanmedia Supervision TV-2400
+ Provideo PV951 TF
+ 3DeMon PV951
+ MediaForte TV-Vision PV951
+ Yoko PV951
+ Vivanco Tuner Card PCI Art.-Nr.: 68404
+ ) now named PV-951T
+
+ Surveillance Series
+ PV-141
+ PV-143
+ PV-147
+ PV-148 (capture only)
+ PV-150
+ PV-151
+
+ TV-FM Tuner Series
+ PV-951TDV (tv tuner + 1394)
+ PV-951T/TF
+ PV-951PT/TF
+ PV-956T/TF Low Profile
+ PV-911
+
+Highscreen
+----------
+ TV Karte = LR50 Rev.S
+ TV-Boostar = Terratec Terra TV+ Version 1.0 (Bt848, tda9821) "ceb105.pcb"
+
+Zoltrix
+-------
+ Face to Face Capture (Bt848 capture only) (PCB "VP-2848")
+ Face To Face TV MAX (Bt848) (PCB "VP-8482 Rev1.3")
+ Genie TV (Bt878) (PCB "VP-8790 Rev 2.1")
+ Genie Wonder Pro
+
+AVerMedia
+---------
+ AVer FunTV Lite (ISA, AV3001 chipset) "M101.C"
+ AVerTV
+ AVerTV Stereo
+ AVerTV Studio (w/FM)
+ AVerMedia TV98 with Remote
+ AVerMedia TV/FM98 Stereo
+ AVerMedia TVCAM98
+ TVCapture (Bt848)
+ TVPhone (Bt848)
+ TVCapture98 (="AVerMedia TV98" in USA) (Bt878)
+ TVPhone98 (Bt878, w/FM)
+
+ PCB PCI-ID Model-Name Eeprom Tuner Sound Country
+ --------------------------------------------------------------------
+ M101.C ISA !
+ M108-B Bt848 -- FR1236 US (2),(3)
+ M1A8-A Bt848 AVer TV-Phone FM1216 --
+ M168-T 1461:0003 AVerTV Studio 48:17 FM1216 TDA9840T D (1) w/FM w/Remote
+ M168-U 1461:0004 TVCapture98 40:11 FI1216 -- D w/Remote
+ M168II-B 1461:0003 Medion MD9592 48:16 FM1216 TDA9873H D w/FM
+
+ (1) Daughterboard MB68-A with TDA9820T and TDA9840T
+ (2) Sony NE41S soldered (stereo sound?)
+ (3) Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
+
+ US site has different drivers for (as of 09/2002):
+ EZ Capture/InterCam PCI (BT-848 chip)
+ EZ Capture/InterCam PCI (BT-878 chip)
+ TV-Phone (BT-848 chip)
+ TV98 (BT-848 chip)
+ TV98 With Remote (BT-848 chip)
+ TV98 (BT-878 chip)
+ TV98 With Remote (BT-878)
+ TV/FM98 (BT-878 chip)
+ AVerTV
+ AverTV Stereo
+ AVerTV Studio
+
+ DE hat diverse Treiber fuer diese Modelle (Stand 09/2002):
+ TVPhone (848) mit Philips tuner FR12X6 (w/ FM radio)
+ TVPhone (848) mit Philips tuner FM12X6 (w/ FM radio)
+ TVCapture (848) w/Philips tuner FI12X6
+ TVCapture (848) non-Philips tuner
+ TVCapture98 (Bt878)
+ TVPhone98 (Bt878)
+ AVerTV und TVCapture98 w/VCR (Bt 878)
+ AVerTVStudio und TVPhone98 w/VCR (Bt878)
+ AVerTV GO Serie (Kein SVideo Input)
+ AVerTV98 (BT-878 chip)
+ AVerTV98 mit Fernbedienung (BT-878 chip)
+ AVerTV/FM98 (BT-878 chip)
+
+ VDOmate (www.averm.com.cn) = M168U ?
+
+Aimslab
+-------
+ Video Highway or "Video Highway TR200" (ISA)
+ Video Highway Xtreme (aka "VHX") (Bt848, FM w/ TEA5757)
+
+IXMicro (former: IMS=Integrated Micro Solutions)
+-------
+ IXTV BT848 (=TurboTV)
+ IXTV BT878
+ IMS TurboTV (Bt848)
+
+Lifetec/Medion/Tevion/Aldi
+--------------------------
+ LT9306/MD9306 = CPH061
+ LT9415/MD9415 = LR90 Rev.F or Rev.G
+ MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H)
+ MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner)
+ MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner)
+
+Modular Technologies (www.modulartech.com) UK
+---------------------------------------------
+ MM100 PCTV (Bt848)
+ MM201 PCTV (Bt878, Bt832) w/ Quartzsight camera
+ MM202 PCTV (Bt878, Bt832, tda9874)
+ MM205 PCTV (Bt878)
+ MM210 PCTV (Bt878) (Galaxy TV, Galaxymedia ?)
+
+Terratec
+--------
+ Terra TV+ Version 1.0 (Bt848), "ceb105.PCB" printed on the PCB, TDA9821
+ Terra TV+ Version 1.1 (Bt878), "LR74 Rev.E" printed on the PCB, TDA9821
+ Terra TValueRadio, "LR102 Rev.C" printed on the PCB
+ Terra TV/Radio+ Version 1.0, "80-CP2830100-0" TTTV3 printed on the PCB,
+ "CPH010-E83" on the back, SAA6588T, TDA9873H
+ Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB,
+ "CPH011-D83" on back
+ Terra TValue Version 1.0 "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
+ Terra TValue New Revision "LR102 Rec.C"
+ Terra Active Radio Upgrade (tea5757h, saa6588t)
+
+ LR74 is a newer PCB revision of ceb105 (both incl. connector for Active Radio Upgrade)
+
+ Cinergy 400 (saa7134), "E877 11(S)", "PM820092D" printed on PCB
+ Cinergy 600 (saa7134)
+
+Technisat
+---------
+ Discos ADR PC-Karte ISA (no TV!)
+ Discos ADR PC-Karte PCI (probably no TV?)
+ Techni-PC-Sat (Sat. analog)
+ Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A)
+ Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio)
+ Mediafocus II (saa7146, Sat. analog)
+ SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A)
+ SkyStar 1 DVB (AV7110) = Technotrend Premium
+ SkyStar 2 DVB (B2C2) (=Sky2PC)
+
+Siemens
+-------
+ Multimedia eXtension Board (MXB) (SAA7146, SAA7111)
+
+Stradis
+-------
+ SDM275,SDM250,SDM026,SDM025 (SAA7146, IBMMPEG2): MPEG2 decoder only
+
+Powercolor
+----------
+ MTV878
+ Package comes with different contents:
+ a) pcb "MTV878" (CARD=75)
+ b) Pixelview Rev. 4_
+ MTV878R w/Remote Control
+ MTV878F w/Remote Control w/FM radio
+
+Pinnacle
+--------
+ Mirovideo PCTV (Bt848)
+ Mirovideo PCTV SE (Bt848)
+ Mirovideo PCTV Pro (Bt848 + Daughterboard for TV Stereo and FM)
+ Studio PCTV Rave (Bt848 Version = Mirovideo PCTV)
+ Studio PCTV Rave (Bt878 package w/o infrared)
+ Studio PCTV (Bt878)
+ Studio PCTV Pro (Bt878 stereo w/ FM)
+ Pinnacle PCTV (Bt878, MT2032)
+ Pinnacle PCTV Pro (Bt878, MT2032)
+ Pinncale PCTV Sat (bt878a, HM1821/1221) ["Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811"]
+ Pinnacle PCTV Sat XE
+
+ M(J)PEG capture and playback:
+ DC1+ (ISA)
+ DC10 (zr36057, zr36060, saa7110, adv7176)
+ DC10+ (zr36067, zr36060, saa7110, adv7176)
+ DC20 (ql16x24b,zr36050, zr36016, saa7110, saa7187 ...)
+ DC30 (zr36057, zr36050, zr36016, vpx3220, adv7176, ad1843, tea6415, miro FST97A1)
+ DC30+ (zr36067, zr36050, zr36016, vpx3220, adv7176)
+ DC50 (zr36067, zr36050, zr36016, saa7112, adv7176 (2 pcs.?), ad1843, miro FST97A1, Lattice ???)
+
+Lenco
+-----
+ MXR-9565 (=Technisat Mediafocus?)
+ MXR-9571 (Bt848) (=CPH031?)
+ MXR-9575
+ MXR-9577 (Bt878) (=Prolink 878TV Rev.3x)
+ MXTV-9578CP (Bt878) (= Prolink PV-BT878P+4E)
+
+Iomega
+------
+ Buz (zr36067, zr36060, saa7111, saa7185)
+
+LML
+---
+ LML33 (zr36067, zr36060, bt819, bt856)
+
+Grandtec
+--------
+ Grand Video Capture (Bt848)
+ Multi Capture Card (Bt878)
+
+Koutech
+-------
+ KW-606 (Bt848)
+ KW-607 (Bt848 capture only)
+ KW-606RSF
+ KW-607A (capture only)
+ KW-608 (Zoran capture only)
+
+IODATA (jp)
+------
+ GV-BCTV/PCI
+ GV-BCTV2/PCI
+ GV-BCTV3/PCI
+ GV-BCTV4/PCI
+ GV-VCP/PCI (capture only)
+ GV-VCP2/PCI (capture only)
+
+Canopus (jp)
+-------
+ WinDVR = Kworld "KW-TVL878RF"
+
+www.sigmacom.co.kr
+------------------
+ Sigma Cyber TV II
+
+www.sasem.co.kr
+---------------
+ Litte OnAir TV
+
+hama
+----
+ TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
+
+Sigma Designs
+-------------
+ Hollywood plus (em8300, em9010, adv7175), (PCB "M340-10") MPEG DVD decoder
+
+Formac
+------
+ iProTV (Card for iMac Mezzanine slot, Bt848+SCSI)
+ ProTV (Bt848)
+ ProTV II = ProTV Stereo (Bt878) ["stereo" means FM stereo, tv is still mono]
+
+ATI
+---
+ TV-Wonder
+ TV-Wonder VE
+
+Diamond Multimedia
+------------------
+ DTV2000 (Bt848, tda9875)
+
+Aopen
+-----
+ VA1000 Plus (w/ Stereo)
+ VA1000 Lite
+ VA1000 (=LR90)
+
+Intel
+-----
+ Smart Video Recorder (ISA full-length)
+ Smart Video Recorder pro (ISA half-length)
+ Smart Video Recorder III (Bt848)
+
+STB
+---
+ STB Gateway 6000704 (bt878)
+ STB Gateway 6000699 (bt848)
+ STB Gateway 6000402 (bt848)
+ STB TV130 PCI
+
+Videologic
+----------
+ Captivator Pro/TV (ISA?)
+ Captivator PCI/VC (Bt848 bundled with camera) (capture only)
+
+Technotrend
+------------
+ TT-SAT PCI (PCB "Sat-PCI Rev.:1.3.1"; zr36125, vpx3225d, stc0056a, Tuner:BSKE6-155A
+ TT-DVB-Sat
+ revisions 1.1, 1.3, 1.5, 1.6 and 2.1
+ This card is sold as OEM from:
+ Siemens DVB-s Card
+ Hauppauge WinTV DVB-S
+ Technisat SkyStar 1 DVB
+ Galaxis DVB Sat
+ Now this card is called TT-PCline Premium Family
+ TT-Budget (saa7146, bsru6-701a)
+ This card is sold as OEM from:
+ Hauppauge WinTV Nova
+ Satelco Standard PCI (DVB-S)
+ TT-DVB-C PCI
+
+Teles
+-----
+ DVB-s (Rev. 2.2, BSRV2-301A, data only?)
+
+Remote Vision
+-------------
+ MX RV605 (Bt848 capture only)
+
+Boeder
+------
+ PC ChatCam (Model 68252) (Bt848 capture only)
+ Tv/Fm Capture Card (Model 68404) = PV951
+
+Media-Surfer (esc-kathrein.de)
+-------------------------------
+ Sat-Surfer (ISA)
+ Sat-Surfer PCI = Techni-PC-Sat
+ Cable-Surfer 1
+ Cable-Surfer 2
+ Cable-Surfer PCI (zr36120)
+ Audio-Surfer (ISA Radio card)
+
+Jetway (www.jetway.com.tw)
+--------------------------
+ JW-TV 878M
+ JW-TV 878 = KWorld KW-TV878RF
+
+Galaxis
+-------
+ Galaxis DVB Card S CI
+ Galaxis DVB Card C CI
+ Galaxis DVB Card S
+ Galaxis DVB Card C
+ Galaxis plug.in S [neuer Name: Galaxis DVB Card S CI
+
+Hauppauge
+---------
+ many many WinTV models ...
+ WinTV DVBs = Technotrend Premium 1.3
+ WinTV NOVA = Technotrend Budget 1.1 "S-DVB DATA"
+ WinTV NOVA-CI "SDVBACI"
+ WinTV Nova USB (=Technotrend USB 1.0)
+ WinTV-Nexus-s (=Technotrend Premium 2.1 or 2.2)
+ WinTV PVR
+ WinTV PVR 250
+ WinTV PVR 450
+
+ US models
+ 990 WinTV-PVR-350 (249USD) (iTVC15 chipset + radio)
+ 980 WinTV-PVR-250 (149USD) (iTVC15 chipset)
+ 880 WinTV-PVR-PCI (199USD) (KFIR chipset + bt878)
+ 881 WinTV-PVR-USB
+ 190 WinTV-GO
+ 191 WinTV-GO-FM
+ 404 WinTV
+ 401 WinTV-radio
+ 495 WinTV-Theater
+ 602 WinTV-USB
+ 621 WinTV-USB-FM
+ 600 USB-Live
+ 698 WinTV-HD
+ 697 WinTV-D
+ 564 WinTV-Nexus-S
+
+ Deutsche Modelle
+ 603 WinTV GO
+ 719 WinTV Primio-FM
+ 718 WinTV PCI-FM
+ 497 WinTV Theater
+ 569 WinTV USB
+ 568 WinTV USB-FM
+ 882 WinTV PVR
+ 981 WinTV PVR 250
+ 891 WinTV-PVR-USB
+ 541 WinTV Nova
+ 488 WinTV Nova-Ci
+ 564 WinTV-Nexus-s
+ 727 WinTV-DVB-c
+ 545 Common Interface
+ 898 WinTV-Nova-USB
+
+ UK models
+ 607 WinTV Go
+ 693,793 WinTV Primio FM
+ 647,747 WinTV PCI FM
+ 498 WinTV Theater
+ 883 WinTV PVR
+ 893 WinTV PVR USB (Duplicate entry)
+ 566 WinTV USB (UK)
+ 573 WinTV USB FM
+ 429 Impact VCB (bt848)
+ 600 USB Live (Video-In 1x Comp, 1xSVHS)
+ 542 WinTV Nova
+ 717 WinTV DVB-S
+ 909 Nova-t PCI
+ 893 Nova-t USB (Duplicate entry)
+ 802 MyTV
+ 804 MyView
+ 809 MyVideo
+ 872 MyTV2Go FM
+
+
+ 546 WinTV Nova-S CI
+ 543 WinTV Nova
+ 907 Nova-S USB
+ 908 Nova-T USB
+ 717 WinTV Nexus-S
+ 157 DEC3000-s Standalone + USB
+
+ Spain
+ 685 WinTV-Go
+ 690 WinTV-PrimioFM
+ 416 WinTV-PCI Nicam Estereo
+ 677 WinTV-PCI-FM
+ 699 WinTV-Theater
+ 683 WinTV-USB
+ 678 WinTV-USB-FM
+ 983 WinTV-PVR-250
+ 883 WinTV-PVR-PCI
+ 993 WinTV-PVR-350
+ 893 WinTV-PVR-USB
+ 728 WinTV-DVB-C PCI
+ 832 MyTV2Go
+ 869 MyTV2Go-FM
+ 805 MyVideo (USB)
+
+
+Matrix-Vision
+-------------
+ MATRIX-Vision MV-Delta
+ MATRIX-Vision MV-Delta 2
+ MVsigma-SLC (Bt848)
+
+Conceptronic (.net)
+------------
+ TVCON FM, TV card w/ FM = CPH05x
+ TVCON = CPH06x
+
+BestData
+--------
+ HCC100 = VCC100rev1 + camera
+ VCC100 rev1 (bt848)
+ VCC100 rev2 (bt878)
+
+Gallant (www.gallantcom.com) www.minton.com.tw
+-----------------------------------------------
+ Intervision IV-510 (capture only bt8x8)
+ Intervision IV-550 (bt8x8)
+ Intervision IV-100 (zoran)
+ Intervision IV-1000 (bt8x8)
+
+Asonic (www.asonic.com.cn) (website down)
+-----------------------------------------
+ SkyEye tv 878
+
+Hoontech
+--------
+ 878TV/FM
+
+Teppro (www.itcteppro.com.tw)
+-----------------------------
+ ITC PCITV (Card Ver 1.0) "Teppro TV1/TVFM1 Card"
+ ITC PCITV (Card Ver 2.0)
+ ITC PCITV (Card Ver 3.0) = "PV-BT878P+ (REV.9D)"
+ ITC PCITV (Card Ver 4.0)
+ TEPPRO IV-550 (For BT848 Main Chip)
+ ITC DSTTV (bt878, satellite)
+ ITC VideoMaker (saa7146, StreamMachine sm2110, tvtuner) "PV-SM2210P+ (REV:1C)"
+
+Kworld (www.kworld.com.tw)
+--------------------------
+ PC TV Station
+ KWORLD KW-TV878R TV (no radio)
+ KWORLD KW-TV878RF TV (w/ radio)
+
+ KWORLD KW-TVL878RF (low profile)
+
+ KWORLD KW-TV713XRF (saa7134)
+
+
+ MPEG TV Station (same cards as above plus WinDVR Software MPEG en/decoder)
+ KWORLD KW-TV878R -Pro TV (no Radio)
+ KWORLD KW-TV878RF-Pro TV (w/ Radio)
+ KWORLD KW-TV878R -Ultra TV (no Radio)
+ KWORLD KW-TV878RF-Ultra TV (w/ Radio)
+
+
+
+JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
+---------------------------------------------------------------------
+ JTT-02 (JTT TV) "TV watchmate pro" (bt848)
+
+ADS www.adstech.com
+-------------------
+ Channel Surfer TV ( CHX-950 )
+ Channel Surfer TV+FM ( CHX-960FM )
+
+AVEC www.prochips.com
+---------------------
+ AVEC Intercapture (bt848, tea6320)
+
+NoBrand
+-------
+ TV Excel = Australian Name for "PV-BT878P+ 8E" or "878TV Rev.3_"
+
+Mach www.machspeed.com
+----
+ Mach TV 878
+
+Eline www.eline-net.com/
+-----
+ Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26 (bt878)
+ Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
+
+Spirit http://www.spiritmodems.com.au/
+------
+ Spirit TV Tuner/Video Capture Card (bt848)
+
+Boser www.boser.com.tw
+-----
+ HS-878 Mini PCI Capture Add-on Card
+ HS-879 Mini PCI 3D Audio and Capture Add-on Card (w/ ES1938 Solo-1)
+
+Satelco www.citycom-gmbh.de, www.satelco.de
+-------
+ TV-FM =KNC1 saa7134
+ Standard PCI (DVB-S) = Technotrend Budget
+ Standard PCI (DVB-S) w/ CI
+ Satelco Highend PCI (DVB-S) = Technotrend Premium
+
+
+Sensoray www.sensoray.com
+--------
+ Sensoray 311 (PC/104 bus)
+ Sensoray 611 (PCI)
+
+CEI (Chartered Electronics Industries Pte Ltd [CEI] [FCC ID HBY])
+---
+ TV Tuner - HBY-33A-RAFFLES Brooktree Bt848KPF + Philips
+ TV Tuner MG9910 - HBY33A-TVO CEI + Philips SAA7110 + OKI M548262 + ST STV8438CV
+ Primetime TV (ISA)
+ acquired by Singapore Technologies
+ now operating as Chartered Semiconductor Manufacturing
+ Manufacturer of video cards is listed as:
+ Cogent Electronics Industries [CEI]
+
+AITech
+------
+ Wavewatcher TV (ISA)
+ AITech WaveWatcher TV-PCI = can be LR26 (Bt848) or LR50 (BT878)
+ WaveWatcher TVR-202 TV/FM Radio Card (ISA)
+
+MAXRON
+------
+ Maxron MaxTV/FM Radio (KW-TV878-FNT) = Kworld or JW-TV878-FBK
+
+www.ids-imaging.de
+------------------
+ Falcon Series (capture only)
+ In USA: http://www.theimagingsource.com/
+ DFG/LC1
+
+www.sknet-web.co.jp
+-------------------
+ SKnet Monster TV (saa7134)
+
+A-Max www.amaxhk.com (Colormax, Amax, Napa)
+-------------------
+ APAC Viewcomp 878
+
+Cybertainment
+-------------
+ CyberMail AV Video Email Kit w/ PCI Capture Card (capture only)
+ CyberMail Xtreme
+ These are Flyvideo
+
+VCR (http://www.vcrinc.com/)
+---
+ Video Catcher 16
+
+Twinhan
+-------
+ DST Card/DST-IP (bt878, twinhan asic) VP-1020
+ Sold as:
+ KWorld DVBS Satellite TV-Card
+ Powercolor DSTV Satellite Tuner Card
+ Prolink Pixelview DTV2000
+ Provideo PV-911 Digital Satellite TV Tuner Card With Common Interface ?
+ DST-CI Card (DVB Satellite) VP-1030
+ DCT Card (DVB cable)
+
+MSI
+---
+ MSI TV@nywhere Tuner Card (MS-8876) (CX23881/883) Not Bt878 compatible.
+ MS-8401 DVB-S
+
+Focus www.focusinfo.com
+-----
+ InVideo PCI (bt878)
+
+Sdisilk www.sdisilk.com/
+-------
+ SDI Silk 100
+ SDI Silk 200 SDI Input Card
+
+www.euresys.com
+ PICOLO series
+
+PMC/Pace
+www.pacecom.co.uk website closed
+
+Mercury www.kobian.com (UK and FR)
+ LR50
+ LR138RBG-Rx == LR138
+
+TEC sound (package and manuals don't have any other manufacturer info) TecSound
+ Though educated googling found: www.techmakers.com
+ TV-Mate = Zoltrix VP-8482
+
+Lorenzen www.lorenzen.de
+--------
+ SL DVB-S PCI = Technotrend Budget PCI (su1278 or bsru version)
+
+Origo (.uk) www.origo2000.com
+ PC TV Card = LR50
+
+I/O Magic www.iomagic.com
+---------
+ PC PVR - Desktop TV Personal Video Recorder DR-PCTV100 = Pinnacle ROB2D-51009464 4.0 + Cyberlink PowerVCR II
+
+Arowana
+-------
+ TV-Karte / Poso Power TV (?) = Zoltrix VP-8482 (?)
+
+iTVC15 boards:
+-------------
+kuroutoshikou.com ITVC15
+yuan.com MPG160 PCI TV (Internal PCI MPEG2 encoder card plus TV-tuner)
+
+Asus www.asuscom.com
+ Asus TV Tuner Card 880 NTSC (low profile, cx23880)
+ Asus TV (saa7134)
+
+Hoontech
+--------
+http://www.hoontech.com/korean/download/down_driver_list03.html
+ HART Vision 848 (H-ART Vision 848)
+ HART Vision 878 (H-Art Vision 878)
diff --git a/Documentation/video4linux/bttv/ICs b/Documentation/video4linux/bttv/ICs
new file mode 100644
index 00000000000..6b749133696
--- /dev/null
+++ b/Documentation/video4linux/bttv/ICs
@@ -0,0 +1,37 @@
+all boards:
+
+Brooktree Bt848/848A/849/878/879: video capture chip
+
+
+
+Miro PCTV:
+
+Philips or Temic Tuner
+
+
+
+Hauppauge Win/TV pci (version 405):
+
+Microchip 24LC02B or
+Philips 8582E2Y: 256 Byte EEPROM with configuration information
+ I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
+Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
+TDA9800: sound decoder
+Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
+14052B: analog switch for selection of sound source
+
+PAL:
+TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
+
+NTSC:
+TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
+TSA5518: no datasheet available on Philips site
+
+
+
+STB TV pci:
+
+???
+if you want better support for STB cards send me info!
+Look at the board! What chips are on it?
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
new file mode 100644
index 00000000000..7bb5a50b077
--- /dev/null
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -0,0 +1,173 @@
+
+Note: "modinfo <module>" prints various informations about a kernel
+module, among them a complete and up-to-date list of insmod options.
+This list tends to be outdated because it is updated manually ...
+
+==========================================================================
+
+bttv.o
+ the bt848/878 (grabber chip) driver
+
+ insmod args:
+ card=n card type, see CARDLIST for a list.
+ tuner=n tuner type, see CARDLIST for a list.
+ radio=0/1 card supports radio
+ pll=0/1/2 pll settings
+ 0: don't use PLL
+ 1: 28 MHz crystal installed
+ 2: 35 MHz crystal installed
+
+ triton1=0/1 for Triton1 (+others) compatibility
+ vsfx=0/1 yet another chipset bug compatibility bit
+ see README.quirks for details on these two.
+
+ bigendian=n Set the endianness of the gfx framebuffer.
+ Default is native endian.
+ fieldnr=0/1 Count fields. Some TV descrambling software
+ needs this, for others it only generates
+ 50 useless IRQs/sec. default is 0 (off).
+ autoload=0/1 autoload helper modules (tuner, audio).
+ default is 1 (on).
+ bttv_verbose=0/1/2 verbose level (at insmod time, while
+ looking at the hardware). default is 1.
+ bttv_debug=0/1 debug messages (for capture).
+ default is 0 (off).
+ irq_debug=0/1 irq handler debug messages.
+ default is 0 (off).
+ gbuffers=2-32 number of capture buffers for mmap'ed capture.
+ default is 4.
+ gbufsize= size of capture buffers. default and
+ maximum value is 0x208000 (~2MB)
+ no_overlay=0 Enable overlay on broken hardware. There
+ are some chipsets (SIS for example) which
+ are known to have problems with the PCI DMA
+ push used by bttv. bttv will disable overlay
+ by default on this hardware to avoid crashes.
+ With this insmod option you can override this.
+ automute=0/1 Automatically mutes the sound if there is
+ no TV signal, on by default. You might try
+ to disable this if you have bad input signal
+ quality which leading to unwanted sound
+ dropouts.
+ chroma_agc=0/1 AGC of chroma signal, off by default.
+ adc_crush=0/1 Luminance ADC crush, on by default.
+
+ bttv_gpio=0/1
+ gpiomask=
+ audioall=
+ audiomux=
+ See Sound-FAQ for a detailed description.
+
+ remap, card, radio and pll accept up to four comma-separated arguments
+ (for multiple boards).
+
+tuner.o
+ The tuner driver. You need this unless you want to use only
+ with a camera or external tuner ...
+
+ insmod args:
+ debug=1 print some debug info to the syslog
+ type=n type of the tuner chip. n as follows:
+ see CARDLIST for a complete list.
+ pal=[bdgil] select PAL variant (used for some tuners
+ only, important for the audio carrier).
+
+tvmixer.o
+ registers a mixer device for the TV card's volume/bass/treble
+ controls (requires a i2c audio control chip like the msp3400).
+
+ insmod args:
+ debug=1 print some debug info to the syslog.
+ devnr=n allocate device #n (0 == /dev/mixer,
+ 1 = /dev/mixer1, ...), default is to
+ use the first free one.
+
+tvaudio.o
+ new, experimental module which is supported to provide a single
+ driver for all simple i2c audio control chips (tda/tea*).
+
+ insmod args:
+ tda8425 = 1 enable/disable the support for the
+ tda9840 = 1 various chips.
+ tda9850 = 1 The tea6300 can't be autodetected and is
+ tda9855 = 1 therefore off by default, if you have
+ tda9873 = 1 this one on your card (STB uses these)
+ tda9874a = 1 you have to enable it explicitly.
+ tea6300 = 0 The two tda985x chips use the same i2c
+ tea6420 = 1 address and can't be disturgished from
+ pic16c54 = 1 each other, you might have to disable
+ the wrong one.
+ debug = 1 print debug messages
+
+ insmod args for tda9874a:
+ tda9874a_SIF=1/2 select sound IF input pin (1 or 2)
+ (default is pin 1)
+ tda9874a_AMSEL=0/1 auto-mute select for NICAM (default=0)
+ Please read note 3 below!
+ tda9874a_STD=n select TV sound standard (0..8):
+ 0 - A2, B/G
+ 1 - A2, M (Korea)
+ 2 - A2, D/K (1)
+ 3 - A2, D/K (2)
+ 4 - A2, D/K (3)
+ 5 - NICAM, I
+ 6 - NICAM, B/G
+ 7 - NICAM, D/K (default)
+ 8 - NICAM, L
+
+ Note 1: tda9874a supports both tda9874h (old) and tda9874a (new) chips.
+ Note 2: tda9874h/a and tda9875 (which is supported separately by
+ tda9875.o) use the same i2c address so both modules should not be
+ used at the same time.
+ Note 3: Using tda9874a_AMSEL option depends on your TV card design!
+ AMSEL=0: auto-mute will switch between NICAM sound
+ and the sound on 1st carrier (i.e. FM mono or AM).
+ AMSEL=1: auto-mute will switch between NICAM sound
+ and the analog mono input (MONOIN pin).
+ If tda9874a decoder on your card has MONOIN pin not connected, then
+ use only tda9874_AMSEL=0 or don't specify this option at all.
+ For example:
+ card=65 (FlyVideo 2000S) - set AMSEL=1 or AMSEL=0
+ card=72 (Prolink PV-BT878P rev.9B) - set AMSEL=0 only
+
+msp3400.o
+ The driver for the msp34xx sound processor chips. If you have a
+ stereo card, you probably want to insmod this one.
+
+ insmod args:
+ debug=1/2 print some debug info to the syslog,
+ 2 is more verbose.
+ simple=1 Use the "short programming" method. Newer
+ msp34xx versions support this. You need this
+ for dbx stereo. Default is on if supported by
+ the chip.
+ once=1 Don't check the TV-stations Audio mode
+ every few seconds, but only once after
+ channel switches.
+ amsound=1 Audio carrier is AM/NICAM at 6.5 Mhz. This
+ should improve things for french people, the
+ carrier autoscan seems to work with FM only...
+
+tea6300.o - OBSOLETE (use tvaudio instead)
+ The driver for the tea6300 fader chip. If you have a stereo
+ card and the msp3400.o doesn't work, you might want to try this
+ one. This chip is seen on most STB TV/FM cards (usually from
+ Gateway OEM sold surplus on auction sites).
+
+ insmod args:
+ debug=1 print some debug info to the syslog.
+
+tda8425.o - OBSOLETE (use tvaudio instead)
+ The driver for the tda8425 fader chip. This driver used to be
+ part of bttv.c, so if your sound used to work but does not
+ anymore, try loading this module.
+
+ insmod args:
+ debug=1 print some debug info to the syslog.
+
+tda985x.o - OBSOLETE (use tvaudio instead)
+ The driver for the tda9850/55 audio chips.
+
+ insmod args:
+ debug=1 print some debug info to the syslog.
+ chip=9850/9855 set the chip type.
diff --git a/Documentation/video4linux/bttv/MAKEDEV b/Documentation/video4linux/bttv/MAKEDEV
new file mode 100644
index 00000000000..6c29ba43b6c
--- /dev/null
+++ b/Documentation/video4linux/bttv/MAKEDEV
@@ -0,0 +1,28 @@
+#!/bin/bash
+
+function makedev () {
+
+ for dev in 0 1 2 3; do
+ echo "/dev/$1$dev: char 81 $[ $2 + $dev ]"
+ rm -f /dev/$1$dev
+ mknod /dev/$1$dev c 81 $[ $2 + $dev ]
+ chmod 666 /dev/$1$dev
+ done
+
+ # symlink for default device
+ rm -f /dev/$1
+ ln -s /dev/${1}0 /dev/$1
+}
+
+# see http://roadrunner.swansea.uk.linux.org/v4lapi.shtml
+
+echo "*** new device names ***"
+makedev video 0
+makedev radio 64
+makedev vtx 192
+makedev vbi 224
+
+#echo "*** old device names (for compatibility only) ***"
+#makedev bttv 0
+#makedev bttv-fm 64
+#makedev bttv-vbi 224
diff --git a/Documentation/video4linux/bttv/Modprobe.conf b/Documentation/video4linux/bttv/Modprobe.conf
new file mode 100644
index 00000000000..55f14650d8c
--- /dev/null
+++ b/Documentation/video4linux/bttv/Modprobe.conf
@@ -0,0 +1,11 @@
+# i2c
+alias char-major-89 i2c-dev
+options i2c-core i2c_debug=1
+options i2c-algo-bit bit_test=1
+
+# bttv
+alias char-major-81 videodev
+alias char-major-81-0 bttv
+options bttv card=2 radio=1
+options tuner debug=1
+
diff --git a/Documentation/video4linux/bttv/Modules.conf b/Documentation/video4linux/bttv/Modules.conf
new file mode 100644
index 00000000000..753f15956eb
--- /dev/null
+++ b/Documentation/video4linux/bttv/Modules.conf
@@ -0,0 +1,14 @@
+# For modern kernels (2.6 or above), this belongs in /etc/modprobe.conf
+# For for 2.4 kernels or earlier, this belongs in /etc/modules.conf.
+
+# i2c
+alias char-major-89 i2c-dev
+options i2c-core i2c_debug=1
+options i2c-algo-bit bit_test=1
+
+# bttv
+alias char-major-81 videodev
+alias char-major-81-0 bttv
+options bttv card=2 radio=1
+options tuner debug=1
+
diff --git a/Documentation/video4linux/bttv/PROBLEMS b/Documentation/video4linux/bttv/PROBLEMS
new file mode 100644
index 00000000000..8e31e9e36bf
--- /dev/null
+++ b/Documentation/video4linux/bttv/PROBLEMS
@@ -0,0 +1,62 @@
+- Start capturing by pressing "c" or by selecting it via a menu!
+
+- Start capturing by pressing "c" or by selecting it via a menu!!!
+
+- The memory of some S3 cards is not recognized right:
+
+ First of all, if you are not using XFree-3.2 or newer, upgrade AT LEAST to
+ XFree-3.2A! This solved the problem for most people.
+
+ Start up X11 like this: "XF86_S3 -probeonly" and write down where the
+ linear frame buffer is.
+ If it is different to the address found by bttv install bttv like this:
+ "insmod bttv vidmem=0xfb0"
+ if the linear frame buffer is at 0xfb000000 (i.e. omit the last 5 zeros!)
+
+ Some S3 cards even take up 64MB of memory but only report 32MB to the BIOS.
+ If this 64MB area overlaps the IO memory of the Bt848 you also have to
+ remap this. E.g.: insmod bttv vidmem=0xfb0 remap=0xfa0
+
+ If the video memory is found at the right place and there are no address
+ conflicts but still no picture (or the computer even crashes),
+ try disabling features of your PCI chipset in the BIOS setup.
+
+ Frank Kapahnke <frank@kapahnke.prima.ruhr.de> also reported that problems
+ with his S3 868 went away when he upgraded to XFree 3.2.
+
+
+- I still only get a black picture with my S3 card!
+
+ Even with XFree-3.2A some people have problems with their S3 cards
+ (mostly with Trio 64 but also with some others)
+ Get the free demo version of Accelerated X from www.xinside.com and try
+ bttv with it. bttv seems to work with most S3 cards with Accelerated X.
+
+ Since I do not know much (better make that almost nothing) about VGA card
+ programming I do not know the reason for this.
+ Looks like XFree does something different when setting up the video memory?
+ Maybe somebody can enlighten me?
+ Would be nice if somebody could get this to work with XFree since
+ Accelerated X costs more than some of the grabber cards ...
+
+ Better linear frame buffer support for S3 cards will probably be in
+ XFree 4.0.
+
+- Grabbing is not switched off when changing consoles with XFree.
+ That's because XFree and some AcceleratedX versions do not send unmap
+ events.
+
+- Some popup windows (e.g. of the window manager) are not refreshed.
+
+ Disable backing store by starting X with the option "-bs"
+
+- When using 32 bpp in XFree or 24+8bpp mode in AccelX 3.1 the system
+ can sometimes lock up if you use more than 1 bt848 card at the same time.
+ You will always get pixel errors when e.g. using more than 1 card in full
+ screen mode. Maybe we need something faster than the PCI bus ...
+
+
+- Some S3 cards and the Matrox Mystique will produce pixel errors with
+ full resolution in 32-bit mode.
+
+- Some video cards have problems with Accelerated X 4.1
diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
new file mode 100644
index 00000000000..a72f4c94fb0
--- /dev/null
+++ b/Documentation/video4linux/bttv/README
@@ -0,0 +1,90 @@
+
+Release notes for bttv
+======================
+
+You'll need at least these config options for bttv:
+ CONFIG_I2C=m
+ CONFIG_I2C_ALGOBIT=m
+ CONFIG_VIDEO_DEV=m
+
+The latest bttv version is available from http://bytesex.org/bttv/
+
+
+Make bttv work with your card
+-----------------------------
+
+Just try "modprobe bttv" and see if that works.
+
+If it doesn't bttv likely could not autodetect your card and needs some
+insmod options. The most important insmod option for bttv is "card=n"
+to select the correct card type. If you get video but no sound you've
+very likely specified the wrong (or no) card type. A list of supported
+cards is in CARDLIST.bttv
+
+If bttv takes very long to load (happens sometimes with the cheap
+cards which have no tuner), try adding this to your modules.conf:
+ options i2c-algo-bit bit_test=1
+
+For the WinTV/PVR you need one firmware file from the driver CD:
+hcwamc.rbf. The file is in the pvr45xxx.exe archive (self-extracting
+zip file, unzip can unpack it). Put it into the /etc/pvr directory or
+use the firm_altera=<path> insmod option to point the driver to the
+location of the file.
+
+If your card isn't listed in CARDLIST.bttv or if you have trouble making
+audio work, you should read the Sound-FAQ.
+
+
+Autodetecting cards
+-------------------
+
+bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists
+the Subsystem ID in the second line, looks like this:
+
+00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
+ Subsystem: Hauppauge computer works Inc. WinTV/GO
+ Flags: bus master, medium devsel, latency 32, IRQ 5
+ Memory at e2000000 (32-bit, prefetchable) [size=4K]
+
+only bt878-based cards can have a subsystem ID (which does not mean
+that every card really has one). bt848 cards can't have a Subsystem
+ID and therefore can't be autodetected. There is a list with the ID's
+in bttv-cards.c (in case you are intrested or want to mail patches
+with updates).
+
+
+Still doesn't work?
+-------------------
+
+I do NOT have a lab with 30+ different grabber boards and a
+PAL/NTSC/SECAM test signal generator at home, so I often can't
+reproduce your problems. This makes debugging very difficult for me.
+If you have some knowledge and spare time, please try to fix this
+yourself (patches very welcome of course...) You know: The linux
+slogan is "Do it yourself".
+
+There is a mailing list: video4linux-list@redhat.com.
+https://listman.redhat.com/mailman/listinfo/video4linux-list
+
+If you have trouble with some specific TV card, try to ask there
+instead of mailing me directly. The chance that someone with the
+same card listens there is much higher...
+
+For problems with sound: There are alot of different systems used
+for TV sound all over the world. And there are also different chips
+which decode the audio signal. Reports about sound problems ("stereo
+does'nt work") are pretty useless unless you include some details
+about your hardware and the TV sound scheme used in your country (or
+at least the country you are living in).
+
+
+Finally: If you mail some patches for bttv around the world (to
+linux-kernel/Alan/Linus/...), please Cc: me.
+
+
+Have fun with bttv,
+
+ Gerd
+
+--
+Gerd Knorr <kraxel@bytesex.org>
diff --git a/Documentation/video4linux/bttv/README.WINVIEW b/Documentation/video4linux/bttv/README.WINVIEW
new file mode 100644
index 00000000000..c61cf286428
--- /dev/null
+++ b/Documentation/video4linux/bttv/README.WINVIEW
@@ -0,0 +1,33 @@
+
+Support for the Leadtek WinView 601 TV/FM by Jon Tombs <jon@gte.esi.us.es>
+
+This card is basically the same as all the rest (Bt484A, Philips tuner),
+the main difference is that they have attached a programmable attenuator to 3
+GPIO lines in order to give some volume control. They have also stuck an
+infra-red remote control decoded on the board, I will add support for this
+when I get time (it simple generates an interrupt for each key press, with
+the key code is placed in the GPIO port).
+
+I don't yet have any application to test the radio support. The tuner
+frequency setting should work but it is possible that the audio multiplexer
+is wrong. If it doesn't work, send me email.
+
+
+- No Thanks to Leadtek they refused to answer any questions about their
+hardware. The driver was written by visual inspection of the card. If you
+use this driver, send an email insult to them, and tell them you won't
+continue buying their hardware unless they support Linux.
+
+- Little thanks to Princeton Technology Corp (http://www.princeton.com.tw)
+who make the audio attenuator. Their publicly available data-sheet available
+on their web site doesn't include the chip programming information! Hidden
+on their server are the full data-sheets, but don't ask how I found it.
+
+To use the driver I use the following options, the tuner and pll settings might
+be different in your country
+
+insmod videodev
+insmod i2c scan=1 i2c_debug=0 verbose=0
+insmod tuner type=1 debug=0
+insmod bttv pll=1 radio=1 card=17
+
diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze
new file mode 100644
index 00000000000..51f8d4379a9
--- /dev/null
+++ b/Documentation/video4linux/bttv/README.freeze
@@ -0,0 +1,74 @@
+
+If the box freezes hard with bttv ...
+=====================================
+
+It might be a bttv driver bug. It also might be bad hardware. It also
+might be something else ...
+
+Just mailing me "bttv freezes" isn't going to help much. This README
+has a few hints how you can help to pin down the problem.
+
+
+bttv bugs
+---------
+
+If some version works and another doesn't it is likely to be a driver
+bug. It is very helpful if you can tell where exactly it broke
+(i.e. the last working and the first broken version).
+
+With a hard freeze you probably doesn't find anything in the logfiles.
+The only way to capture any kernel messages is to hook up a serial
+console and let some terminal application log the messages. /me uses
+screen. See Documentation/serial-console.txt for details on setting
+up a serial console.
+
+Read Documentation/oops-tracing.txt to learn how to get any useful
+information out of a register+stack dump printed by the kernel on
+protection faults (so-called "kernel oops").
+
+If you run into some kind of deadlock, you can try to dump a call trace
+for each process using sysrq-t (see Documentation/sysrq.txt). ksymoops
+will translate these dumps into kernel symbols too. This way it is
+possible to figure where *exactly* some process in "D" state is stuck.
+
+I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
+for some people. Thus probably a small buglet left somewhere in bttv
+0.7.x. I have no idea where exactly, it works stable for me and alot of
+other people. But in case you have problems with the 0.7.x versions you
+can give 0.8.x a try ...
+
+
+hardware bugs
+-------------
+
+Some hardware can't deal with PCI-PCI transfers (i.e. grabber => vga).
+Sometimes problems show up with bttv just because of the high load on
+the PCI bus. The bt848/878 chips have a few workarounds for known
+incompatibilities, see README.quirks.
+
+Some folks report that increasing the pci latency helps too,
+althrought I'm not sure whenever this really fixes the problems or
+only makes it less likely to happen. Both bttv and btaudio have a
+insmod option to set the PCI latency of the device.
+
+Some mainboard have problems to deal correctly with multiple devices
+doing DMA at the same time. bttv + ide seems to cause this sometimes,
+if this is the case you likely see freezes only with video and hard disk
+access at the same time. Updating the IDE driver to get the latest and
+greatest workarounds for hardware bugs might fix these problems.
+
+
+other
+-----
+
+If you use some binary-only yunk (like nvidia module) try to reproduce
+the problem without.
+
+IRQ sharing is known to cause problems in some cases. It works just
+fine in theory and many configurations. Neverless it might be worth a
+try to shuffle around the PCI cards to give bttv another IRQ or make
+it share the IRQ with some other piece of hardware. IRQ sharing with
+VGA cards seems to cause trouble sometimes. I've also seen funny
+effects with bttv sharing the IRQ with the ACPI bridge (and
+apci-enabled kernel).
+
diff --git a/Documentation/video4linux/bttv/README.quirks b/Documentation/video4linux/bttv/README.quirks
new file mode 100644
index 00000000000..e8edb87df71
--- /dev/null
+++ b/Documentation/video4linux/bttv/README.quirks
@@ -0,0 +1,83 @@
+
+Below is what the bt878 data book says about the PCI bug compatibility
+modes of the bt878 chip.
+
+The triton1 insmod option sets the EN_TBFX bit in the control register.
+The vsfx insmod option does the same for EN_VSFX bit. If you have
+stability problems you can try if one of these options makes your box
+work solid.
+
+drivers/pci/quirks.c knows about these issues, this way these bits are
+enabled automagically for known-buggy chipsets (look at the kernel
+messages, bttv tells you).
+
+HTH,
+
+ Gerd
+
+---------------------------- cut here --------------------------
+
+Normal PCI Mode
+---------------
+
+The PCI REQ signal is the logical-or of the incoming function requests.
+The inter-nal GNT[0:1] signals are gated asynchronously with GNT and
+demultiplexed by the audio request signal. Thus the arbiter defaults to
+the video function at power-up and parks there during no requests for
+bus access. This is desirable since the video will request the bus more
+often. However, the audio will have highest bus access priority. Thus
+the audio will have first access to the bus even when issuing a request
+after the video request but before the PCI external arbiter has granted
+access to the Bt879. Neither function can preempt the other once on the
+bus. The duration to empty the entire video PCI FIFO onto the PCI bus is
+very short compared to the bus access latency the audio PCI FIFO can
+tolerate.
+
+
+430FX Compatibility Mode
+------------------------
+
+When using the 430FX PCI, the following rules will ensure
+compatibility:
+
+ (1) Deassert REQ at the same time as asserting FRAME.
+ (2) Do not reassert REQ to request another bus transaction until after
+ finish-ing the previous transaction.
+
+Since the individual bus masters do not have direct control of REQ, a
+simple logical-or of video and audio requests would violate the rules.
+Thus, both the arbiter and the initiator contain 430FX compatibility
+mode logic. To enable 430FX mode, set the EN_TBFX bit as indicated in
+Device Control Register on page 104.
+
+When EN_TBFX is enabled, the arbiter ensures that the two compatibility
+rules are satisfied. Before GNT is asserted by the PCI arbiter, this
+internal arbiter may still logical-or the two requests. However, once
+the GNT is issued, this arbiter must lock in its decision and now route
+only the granted request to the REQ pin. The arbiter decision lock
+happens regardless of the state of FRAME because it does not know when
+FRAME will be asserted (typically - each initiator will assert FRAME on
+the cycle following GNT). When FRAME is asserted, it is the initiator s
+responsibility to remove its request at the same time. It is the
+arbiters responsibility to allow this request to flow through to REQ and
+not allow the other request to hold REQ asserted. The decision lock may
+be removed at the end of the transaction: for example, when the bus is
+idle (FRAME and IRDY). The arbiter decision may then continue
+asynchronously until GNT is again asserted.
+
+
+Interfacing with Non-PCI 2.1 Compliant Core Logic
+-------------------------------------------------
+
+A small percentage of core logic devices may start a bus transaction
+during the same cycle that GNT is de-asserted. This is non PCI 2.1
+compliant. To ensure compatibility when using PCs with these PCI
+controllers, the EN_VSFX bit must be enabled (refer to Device Control
+Register on page 104). When in this mode, the arbiter does not pass GNT
+to the internal functions unless REQ is asserted. This prevents a bus
+transaction from starting the same cycle as GNT is de-asserted. This
+also has the side effect of not being able to take advantage of bus
+parking, thus lowering arbitration performance. The Bt879 drivers must
+query for these non-compliant devices, and set the EN_VSFX bit only if
+required.
+
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
new file mode 100644
index 00000000000..b8c9c2605ce
--- /dev/null
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -0,0 +1,148 @@
+
+bttv and sound mini howto
+=========================
+
+There are alot of different bt848/849/878/879 based boards available.
+Making video work often is not a big deal, because this is handled
+completely by the bt8xx chip, which is common on all boards. But
+sound is handled in slightly different ways on each board.
+
+To handle the grabber boards correctly, there is a array tvcards[] in
+bttv-cards.c, which holds the informations required for each board.
+Sound will work only, if the correct entry is used (for video it often
+makes no difference). The bttv driver prints a line to the kernel
+log, telling which card type is used. Like this one:
+
+ bttv0: model: BT848(Hauppauge old) [autodetected]
+
+You should verify this is correct. If it isn't, you have to pass the
+correct board type as insmod argument, "insmod bttv card=2" for
+example. The file CARDLIST has a list of valid arguments for card.
+If your card isn't listed there, you might check the source code for
+new entries which are not listed yet. If there isn't one for your
+card, you can check if one of the existing entries does work for you
+(just trial and error...).
+
+Some boards have an extra processor for sound to do stereo decoding
+and other nice features. The msp34xx chips are used by Hauppauge for
+example. If your board has one, you might have to load a helper
+module like msp3400.o to make sound work. If there isn't one for the
+chip used on your board: Bad luck. Start writing a new one. Well,
+you might want to check the video4linux mailing list archive first...
+
+Of course you need a correctly installed soundcard unless you have the
+speakers connected directly to the grabber board. Hint: check the
+mixer settings too. ALSA for example has everything muted by default.
+
+
+How sound works in detail
+=========================
+
+Still doesn't work? Looks like some driver hacking is required.
+Below is a do-it-yourself description for you.
+
+The bt8xx chips have 32 general purpose pins, and registers to control
+these pins. One register is the output enable register
+(BT848_GPIO_OUT_EN), it says which pins are actively driven by the
+bt848 chip. Another one is the data register (BT848_GPIO_DATA), where
+you can get/set the status if these pins. They can be used for input
+and output.
+
+Most grabber board vendors use these pins to control an external chip
+which does the sound routing. But every board is a little different.
+These pins are also used by some companies to drive remote control
+receiver chips. Some boards use the i2c bus instead of the gpio pins
+to connect the mux chip.
+
+As mentioned above, there is a array which holds the required
+informations for each known board. You basically have to create a new
+line for your board. The important fields are these two:
+
+struct tvcard
+{
+ [ ... ]
+ u32 gpiomask;
+ u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
+};
+
+gpiomask specifies which pins are used to control the audio mux chip.
+The corresponding bits in the output enable register
+(BT848_GPIO_OUT_EN) will be set as these pins must be driven by the
+bt848 chip.
+
+The audiomux[] array holds the data values for the different inputs
+(i.e. which pins must be high/low for tuner/mute/...). This will be
+written to the data register (BT848_GPIO_DATA) to switch the audio
+mux.
+
+
+What you have to do is figure out the correct values for gpiomask and
+the audiomux array. If you have Windows and the drivers four your
+card installed, you might to check out if you can read these registers
+values used by the windows driver. A tool to do this is available
+from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
+does'nt work with bt878 boards according to some reports I received.
+Another one with bt878 suport is available from
+http://btwincap.sourceforge.net/Files/btspy2.00.zip
+
+You might also dig around in the *.ini files of the Windows applications.
+You can have a look at the board to see which of the gpio pins are
+connected at all and then start trial-and-error ...
+
+
+Starting with release 0.7.41 bttv has a number of insmod options to
+make the gpio debugging easier:
+
+bttv_gpio=0/1 enable/disable gpio debug messages
+gpiomask=n set the gpiomask value
+audiomux=i,j,... set the values of the audiomux array
+audioall=a set the values of the audiomux array (one
+ value for all array elements, useful to check
+ out which effect the particular value has).
+
+The messages printed with bttv_gpio=1 look like this:
+
+ bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off]
+
+en = output _en_able register (BT848_GPIO_OUT_EN)
+out = _out_put bits of the data register (BT848_GPIO_DATA),
+ i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN
+in = _in_put bits of the data register,
+ i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN
+
+
+
+Other elements of the tvcards array
+===================================
+
+If you are trying to make a new card work you might find it useful to
+know what the other elements in the tvcards array are good for:
+
+video_inputs - # of video inputs the card has
+audio_inputs - historical cruft, not used any more.
+tuner - which input is the tuner
+svhs - which input is svhs (all others are labeled composite)
+muxsel - video mux, input->registervalue mapping
+pll - same as pll= insmod option
+tuner_type - same as tuner= insmod option
+*_modulename - hint whenever some card needs this or that audio
+ module loaded to work properly.
+has_radio - whenever this TV card has a radio tuner.
+no_msp34xx - "1" disables loading of msp3400.o module
+no_tda9875 - "1" disables loading of tda9875.o module
+needs_tvaudio - set to "1" to load tvaudio.o module
+
+If some config item is specified both from the tvcards array and as
+insmod option, the insmod option takes precedence.
+
+
+
+Good luck,
+
+ Gerd
+
+
+PS: If you have a new working entry, mail it to me.
+
+--
+Gerd Knorr <kraxel@bytesex.org>
diff --git a/Documentation/video4linux/bttv/Specs b/Documentation/video4linux/bttv/Specs
new file mode 100644
index 00000000000..79b9e576fe7
--- /dev/null
+++ b/Documentation/video4linux/bttv/Specs
@@ -0,0 +1,3 @@
+Philips http://www.Semiconductors.COM/pip/
+Conexant http://www.conexant.com/techinfo/default.asp
+Micronas http://www.micronas.de/pages/product_documentation/index.html
diff --git a/Documentation/video4linux/bttv/THANKS b/Documentation/video4linux/bttv/THANKS
new file mode 100644
index 00000000000..2085399da7d
--- /dev/null
+++ b/Documentation/video4linux/bttv/THANKS
@@ -0,0 +1,24 @@
+Many thanks to:
+
+- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
+ and tuner programming and his control program xtvc.
+
+- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
+ package.
+
+- Gerd Knorr <kraxel@cs.tu-berlin.de> for the MSP3400 support and the modular
+ I2C, tuner, ... support.
+
+
+- MATRIX Vision for giving us 2 cards for free, which made support of
+ single crystal operation possible.
+
+- MIRO for providing a free PCTV card and detailed information about the
+ components on their cards. (E.g. how the tuner type is detected)
+ Without their card I could not have debugged the NTSC mode.
+
+- Hauppauge for telling how the sound input is selected and what components
+ they do and will use on their radio cards.
+ Also many thanks for faxing me the FM1216 data sheet.
+
+
diff --git a/Documentation/video4linux/bttv/Tuners b/Documentation/video4linux/bttv/Tuners
new file mode 100644
index 00000000000..d18fbc70c0e
--- /dev/null
+++ b/Documentation/video4linux/bttv/Tuners
@@ -0,0 +1,115 @@
+1) Tuner Programming
+====================
+There are some flavors of Tuner programming APIs.
+These differ mainly by the bandswitch byte.
+
+ L= LG_API (VHF_LO=0x01, VHF_HI=0x02, UHF=0x08, radio=0x04)
+ P= PHILIPS_API (VHF_LO=0xA0, VHF_HI=0x90, UHF=0x30, radio=0x04)
+ T= TEMIC_API (VHF_LO=0x02, VHF_HI=0x04, UHF=0x01)
+ A= ALPS_API (VHF_LO=0x14, VHF_HI=0x12, UHF=0x11)
+ M= PHILIPS_MK3 (VHF_LO=0x01, VHF_HI=0x02, UHF=0x04, radio=0x19)
+
+2) Tuner Manufacturers
+======================
+
+SAMSUNG Tuner identification: (e.g. TCPM9091PD27)
+ TCP [ABCJLMNQ] 90[89][125] [DP] [ACD] 27 [ABCD]
+ [ABCJLMNQ]:
+ A= BG+DK
+ B= BG
+ C= I+DK
+ J= NTSC-Japan
+ L= Secam LL
+ M= BG+I+DK
+ N= NTSC
+ Q= BG+I+DK+LL
+ [89]: ?
+ [125]:
+ 2: No FM
+ 5: With FM
+ [DP]:
+ D= NTSC
+ P= PAL
+ [ACD]:
+ A= F-connector
+ C= Phono connector
+ D= Din Jack
+ [ABCD]:
+ 3-wire/I2C tuning, 2-band/3-band
+
+ These Tuners are PHILIPS_API compatible.
+
+Philips Tuner identification: (e.g. FM1216MF)
+ F[IRMQ]12[1345]6{MF|ME|MP}
+ F[IRMQ]:
+ FI12x6: Tuner Series
+ FR12x6: Tuner + Radio IF
+ FM12x6: Tuner + FM
+ FQ12x6: special
+ FMR12x6: special
+ TD15xx: Digital Tuner ATSC
+ 12[1345]6:
+ 1216: PAL BG
+ 1236: NTSC
+ 1246: PAL I
+ 1256: Pal DK
+ {MF|ME|MP}
+ MF: BG LL w/ Secam (Multi France)
+ ME: BG DK I LL (Multi Europe)
+ MP: BG DK I (Multi PAL)
+ MR: BG DK M (?)
+ MG: BG DKI M (?)
+ MK2 series PHILIPS_API, most tuners are compatible to this one !
+ MK3 series introduced in 2002 w/ PHILIPS_MK3_API
+
+Temic Tuner identification: (.e.g 4006FH5)
+ 4[01][0136][269]F[HYNR]5
+ 40x2: Tuner (5V/33V), TEMIC_API.
+ 40x6: Tuner 5V
+ 41xx: Tuner compact
+ 40x9: Tuner+FM compact
+ [0136]
+ xx0x: PAL BG
+ xx1x: Pal DK, Secam LL
+ xx3x: NTSC
+ xx6x: PAL I
+ F[HYNR]5
+ FH5: Pal BG
+ FY5: others
+ FN5: multistandard
+ FR5: w/ FM radio
+ 3X xxxx: order number with specific connector
+ Note: Only 40x2 series has TEMIC_API, all newer tuners have PHILIPS_API.
+
+LG Innotek Tuner:
+ TPI8NSR11 : NTSC J/M (TPI8NSR01 w/FM) (P,210/497)
+ TPI8PSB11 : PAL B/G (TPI8PSB01 w/FM) (P,170/450)
+ TAPC-I701 : PAL I (TAPC-I001 w/FM) (P,170/450)
+ TPI8PSB12 : PAL D/K+B/G (TPI8PSB02 w/FM) (P,170/450)
+ TAPC-H701P: NTSC_JP (TAPC-H001P w/FM) (L,170/450)
+ TAPC-G701P: PAL B/G (TAPC-G001P w/FM) (L,170/450)
+ TAPC-W701P: PAL I (TAPC-W001P w/FM) (L,170/450)
+ TAPC-Q703P: PAL D/K (TAPC-Q001P w/FM) (L,170/450)
+ TAPC-Q704P: PAL D/K+I (L,170/450)
+ TAPC-G702P: PAL D/K+B/G (L,170/450)
+
+ TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69)
+ TADC-M201D: PAL D/K+B/G+I (L,143/425) (sound control at I2C address 0xc8)
+ TADC-T003F: NTSC Taiwan (L,175/410?; 2-B, C-W+11, W+12-69)
+ Suffix:
+ P= Standard phono female socket
+ D= IEC female socket
+ F= F-connector
+
+Other Tuners:
+TCL2002MB-1 : PAL BG + DK =TUNER_LG_PAL_NEW_TAPC
+TCL2002MB-1F: PAL BG + DK w/FM =PHILIPS_PAL
+TCL2002MI-2 : PAL I = ??
+
+ALPS Tuners:
+ Most are LG_API compatible
+ TSCH6 has ALPS_API (TSCH5 ?)
+ TSBE1 has extra API 05,02,08 Control_byte=0xCB Source:(1)
+
+Lit.
+(1) conexant100029b-PCI-Decoder-ApplicationNote.pdf