aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devices.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devices.txt')
-rw-r--r--Documentation/devices.txt3216
1 files changed, 3216 insertions, 0 deletions
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
new file mode 100644
index 00000000000..bb67cf25010
--- /dev/null
+++ b/Documentation/devices.txt
@@ -0,0 +1,3216 @@
+
+ LINUX ALLOCATED DEVICES (2.6+ version)
+
+ Maintained by Torben Mathiasen <device@lanana.org>
+
+ Last revised: 25 January 2005
+
+This list is the Linux Device List, the official registry of allocated
+device numbers and /dev directory nodes for the Linux operating
+system.
+
+The latest version of this list is available from
+http://www.lanana.org/docs/device-list/ or
+ftp://ftp.kernel.org/pub/linux/docs/device-list/. This version may be
+newer than the one distributed with the Linux kernel.
+
+The LaTeX version of this document is no longer maintained.
+
+This document is included by reference into the Filesystem Hierarchy
+Standard (FHS). The FHS is available from http://www.pathname.com/fhs/.
+
+Allocations marked (68k/Amiga) apply to Linux/68k on the Amiga
+platform only. Allocations marked (68k/Atari) apply to Linux/68k on
+the Atari platform only.
+
+The symbol {2.6} means the allocation is obsolete and scheduled for
+removal once kernel version 2.6 (or equivalent) is released. Some of these
+allocations have already been removed.
+
+This document is in the public domain. The author requests, however,
+that semantically altered versions are not distributed without
+permission of the author, assuming the author can be contacted without
+an unreasonable effort.
+
+In particular, please don't sent patches for this list to Linus, at
+least not without contacting me first.
+
+I do not have any information about these devices beyond what appears
+on this list. Any such information requests will be deleted without
+reply.
+
+
+ **** DEVICE DRIVERS AUTHORS PLEASE READ THIS ****
+
+To have a major number allocated, or a minor number in situations
+where that applies (e.g. busmice), please contact me with the
+appropriate device information. Also, if you have additional
+information regarding any of the devices listed below, or if I have
+made a mistake, I would greatly appreciate a note.
+
+I do, however, make a few requests about the nature of your report.
+This is necessary for me to be able to keep this list up to date and
+correct in a timely manner. First of all, *please* send it to the
+correct address... <device@lanana.org>. I receive hundreds of email
+messages a day, so mail sent to other addresses may very well get lost
+in the avalanche. Please put in a descriptive subject, so I can find
+your mail again should I need to. Too many people send me email
+saying just "device number request" in the subject.
+
+Second, please include a description of the device *in the same format
+as this list*. The reason for this is that it is the only way I have
+found to ensure I have all the requisite information to publish your
+device and avoid conflicts.
+
+Third, please don't assume that the distributed version of the list is
+up to date. Due to the number of registrations I have to maintain it
+in "batch mode", so there is likely additional registrations that
+haven't been listed yet.
+
+Finally, sometimes I have to play "namespace police." Please don't be
+offended. I often get submissions for /dev names that would be bound
+to cause conflicts down the road. I am trying to avoid getting in a
+situation where we would have to suffer an incompatible forward
+change. Therefore, please consult with me *before* you make your
+device names and numbers in any way public, at least to the point
+where it would be at all difficult to get them changed.
+
+Your cooperation is appreciated.
+
+
+ 0 Unnamed devices (e.g. non-device mounts)
+ 0 = reserved as null device number
+ See block major 144, 145, 146 for expansion areas.
+
+ 1 char Memory devices
+ 1 = /dev/mem Physical memory access
+ 2 = /dev/kmem Kernel virtual memory access
+ 3 = /dev/null Null device
+ 4 = /dev/port I/O port access
+ 5 = /dev/zero Null byte source
+ 6 = /dev/core OBSOLETE - replaced by /proc/kcore
+ 7 = /dev/full Returns ENOSPC on write
+ 8 = /dev/random Nondeterministic random number gen.
+ 9 = /dev/urandom Faster, less secure random number gen.
+ 10 = /dev/aio Asyncronous I/O notification interface
+ 11 = /dev/kmsg Writes to this come out as printk's
+ 1 block RAM disk
+ 0 = /dev/ram0 First RAM disk
+ 1 = /dev/ram1 Second RAM disk
+ ...
+ 250 = /dev/initrd Initial RAM disk {2.6}
+
+ Older kernels had /dev/ramdisk (1, 1) here.
+ /dev/initrd refers to a RAM disk which was preloaded
+ by the boot loader; newer kernels use /dev/ram0 for
+ the initrd.
+
+ 2 char Pseudo-TTY masters
+ 0 = /dev/ptyp0 First PTY master
+ 1 = /dev/ptyp1 Second PTY master
+ ...
+ 255 = /dev/ptyef 256th PTY master
+
+ Pseudo-tty's are named as follows:
+ * Masters are "pty", slaves are "tty";
+ * the fourth letter is one of pqrstuvwxyzabcde indicating
+ the 1st through 16th series of 16 pseudo-ttys each, and
+ * the fifth letter is one of 0123456789abcdef indicating
+ the position within the series.
+
+ These are the old-style (BSD) PTY devices; Unix98
+ devices are on major 128 and above and use the PTY
+ master multiplex (/dev/ptmx) to acquire a PTY on
+ demand.
+
+ 2 block Floppy disks
+ 0 = /dev/fd0 Controller 0, drive 0, autodetect
+ 1 = /dev/fd1 Controller 0, drive 1, autodetect
+ 2 = /dev/fd2 Controller 0, drive 2, autodetect
+ 3 = /dev/fd3 Controller 0, drive 3, autodetect
+ 128 = /dev/fd4 Controller 1, drive 0, autodetect
+ 129 = /dev/fd5 Controller 1, drive 1, autodetect
+ 130 = /dev/fd6 Controller 1, drive 2, autodetect
+ 131 = /dev/fd7 Controller 1, drive 3, autodetect
+
+ To specify format, add to the autodetect device number:
+ 0 = /dev/fd? Autodetect format
+ 4 = /dev/fd?d360 5.25" 360K in a 360K drive(1)
+ 20 = /dev/fd?h360 5.25" 360K in a 1200K drive(1)
+ 48 = /dev/fd?h410 5.25" 410K in a 1200K drive
+ 64 = /dev/fd?h420 5.25" 420K in a 1200K drive
+ 24 = /dev/fd?h720 5.25" 720K in a 1200K drive
+ 80 = /dev/fd?h880 5.25" 880K in a 1200K drive(1)
+ 8 = /dev/fd?h1200 5.25" 1200K in a 1200K drive(1)
+ 40 = /dev/fd?h1440 5.25" 1440K in a 1200K drive(1)
+ 56 = /dev/fd?h1476 5.25" 1476K in a 1200K drive
+ 72 = /dev/fd?h1494 5.25" 1494K in a 1200K drive
+ 92 = /dev/fd?h1600 5.25" 1600K in a 1200K drive(1)
+
+ 12 = /dev/fd?u360 3.5" 360K Double Density(2)
+ 16 = /dev/fd?u720 3.5" 720K Double Density(1)
+ 120 = /dev/fd?u800 3.5" 800K Double Density(2)
+ 52 = /dev/fd?u820 3.5" 820K Double Density
+ 68 = /dev/fd?u830 3.5" 830K Double Density
+ 84 = /dev/fd?u1040 3.5" 1040K Double Density(1)
+ 88 = /dev/fd?u1120 3.5" 1120K Double Density(1)
+ 28 = /dev/fd?u1440 3.5" 1440K High Density(1)
+ 124 = /dev/fd?u1600 3.5" 1600K High Density(1)
+ 44 = /dev/fd?u1680 3.5" 1680K High Density(3)
+ 60 = /dev/fd?u1722 3.5" 1722K High Density
+ 76 = /dev/fd?u1743 3.5" 1743K High Density
+ 96 = /dev/fd?u1760 3.5" 1760K High Density
+ 116 = /dev/fd?u1840 3.5" 1840K High Density(3)
+ 100 = /dev/fd?u1920 3.5" 1920K High Density(1)
+ 32 = /dev/fd?u2880 3.5" 2880K Extra Density(1)
+ 104 = /dev/fd?u3200 3.5" 3200K Extra Density
+ 108 = /dev/fd?u3520 3.5" 3520K Extra Density
+ 112 = /dev/fd?u3840 3.5" 3840K Extra Density(1)
+
+ 36 = /dev/fd?CompaQ Compaq 2880K drive; obsolete?
+
+ (1) Autodetectable format
+ (2) Autodetectable format in a Double Density (720K) drive only
+ (3) Autodetectable format in a High Density (1440K) drive only
+
+ NOTE: The letter in the device name (d, q, h or u)
+ signifies the type of drive: 5.25" Double Density (d),
+ 5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
+ (any model, u). The use of the capital letters D, H
+ and E for the 3.5" models have been deprecated, since
+ the drive type is insignificant for these devices.
+
+ 3 char Pseudo-TTY slaves
+ 0 = /dev/ttyp0 First PTY slave
+ 1 = /dev/ttyp1 Second PTY slave
+ ...
+ 255 = /dev/ttyef 256th PTY slave
+
+ These are the old-style (BSD) PTY devices; Unix98
+ devices are on major 136 and above.
+
+ 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
+ 0 = /dev/hda Master: whole disk (or CD-ROM)
+ 64 = /dev/hdb Slave: whole disk (or CD-ROM)
+
+ For partitions, add to the whole disk device number:
+ 0 = /dev/hd? Whole disk
+ 1 = /dev/hd?1 First partition
+ 2 = /dev/hd?2 Second partition
+ ...
+ 63 = /dev/hd?63 63rd partition
+
+ For Linux/i386, partitions 1-4 are the primary
+ partitions, and 5 and above are logical partitions.
+ Other versions of Linux use partitioning schemes
+ appropriate to their respective architectures.
+
+ 4 char TTY devices
+ 0 = /dev/tty0 Current virtual console
+
+ 1 = /dev/tty1 First virtual console
+ ...
+ 63 = /dev/tty63 63rd virtual console
+ 64 = /dev/ttyS0 First UART serial port
+ ...
+ 255 = /dev/ttyS191 192nd UART serial port
+
+ UART serial ports refer to 8250/16450/16550 series devices.
+
+ Older versions of the Linux kernel used this major
+ number for BSD PTY devices. As of Linux 2.1.115, this
+ is no longer supported. Use major numbers 2 and 3.
+
+ 4 block Aliases for dynamically allocated major devices to be used
+ when its not possible to create the real device nodes
+ because the root filesystem is mounted read-only.
+
+ 0 = /dev/root
+
+ 5 char Alternate TTY devices
+ 0 = /dev/tty Current TTY device
+ 1 = /dev/console System console
+ 2 = /dev/ptmx PTY master multiplex
+ 64 = /dev/cua0 Callout device for ttyS0
+ ...
+ 255 = /dev/cua191 Callout device for ttyS191
+
+ (5,1) is /dev/console starting with Linux 2.1.71. See
+ the section on terminal devices for more information
+ on /dev/console.
+
+ 6 char Parallel printer devices
+ 0 = /dev/lp0 Parallel printer on parport0
+ 1 = /dev/lp1 Parallel printer on parport1
+ ...
+
+ Current Linux kernels no longer have a fixed mapping
+ between parallel ports and I/O addresses. Instead,
+ they are redirected through the parport multiplex layer.
+
+ 7 char Virtual console capture devices
+ 0 = /dev/vcs Current vc text contents
+ 1 = /dev/vcs1 tty1 text contents
+ ...
+ 63 = /dev/vcs63 tty63 text contents
+ 128 = /dev/vcsa Current vc text/attribute contents
+ 129 = /dev/vcsa1 tty1 text/attribute contents
+ ...
+ 191 = /dev/vcsa63 tty63 text/attribute contents
+
+ NOTE: These devices permit both read and write access.
+
+ 7 block Loopback devices
+ 0 = /dev/loop0 First loopback device
+ 1 = /dev/loop1 Second loopback device
+ ...
+
+ The loopback devices are used to mount filesystems not
+ associated with block devices. The binding to the
+ loopback devices is handled by mount(8) or losetup(8).
+
+ 8 block SCSI disk devices (0-15)
+ 0 = /dev/sda First SCSI disk whole disk
+ 16 = /dev/sdb Second SCSI disk whole disk
+ 32 = /dev/sdc Third SCSI disk whole disk
+ ...
+ 240 = /dev/sdp Sixteenth SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 9 char SCSI tape devices
+ 0 = /dev/st0 First SCSI tape, mode 0
+ 1 = /dev/st1 Second SCSI tape, mode 0
+ ...
+ 32 = /dev/st0l First SCSI tape, mode 1
+ 33 = /dev/st1l Second SCSI tape, mode 1
+ ...
+ 64 = /dev/st0m First SCSI tape, mode 2
+ 65 = /dev/st1m Second SCSI tape, mode 2
+ ...
+ 96 = /dev/st0a First SCSI tape, mode 3
+ 97 = /dev/st1a Second SCSI tape, mode 3
+ ...
+ 128 = /dev/nst0 First SCSI tape, mode 0, no rewind
+ 129 = /dev/nst1 Second SCSI tape, mode 0, no rewind
+ ...
+ 160 = /dev/nst0l First SCSI tape, mode 1, no rewind
+ 161 = /dev/nst1l Second SCSI tape, mode 1, no rewind
+ ...
+ 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
+ 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
+ ...
+ 224 = /dev/nst0a First SCSI tape, mode 3, no rewind
+ 225 = /dev/nst1a Second SCSI tape, mode 3, no rewind
+ ...
+
+ "No rewind" refers to the omission of the default
+ automatic rewind on device close. The MTREW or MTOFFL
+ ioctl()'s can be used to rewind the tape regardless of
+ the device used to access it.
+
+ 9 block Metadisk (RAID) devices
+ 0 = /dev/md0 First metadisk group
+ 1 = /dev/md1 Second metadisk group
+ ...
+
+ The metadisk driver is used to span a
+ filesystem across multiple physical disks.
+
+ 10 char Non-serial mice, misc features
+ 0 = /dev/logibm Logitech bus mouse
+ 1 = /dev/psaux PS/2-style mouse port
+ 2 = /dev/inportbm Microsoft Inport bus mouse
+ 3 = /dev/atibm ATI XL bus mouse
+ 4 = /dev/jbm J-mouse
+ 4 = /dev/amigamouse Amiga mouse (68k/Amiga)
+ 5 = /dev/atarimouse Atari mouse
+ 6 = /dev/sunmouse Sun mouse
+ 7 = /dev/amigamouse1 Second Amiga mouse
+ 8 = /dev/smouse Simple serial mouse driver
+ 9 = /dev/pc110pad IBM PC-110 digitizer pad
+ 10 = /dev/adbmouse Apple Desktop Bus mouse
+ 11 = /dev/vrtpanel Vr41xx embedded touch panel
+ 13 = /dev/vpcmouse Connectix Virtual PC Mouse
+ 14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen
+ 15 = /dev/touchscreen/mk712 MK712 touchscreen
+ 128 = /dev/beep Fancy beep device
+ 129 = /dev/modreq Kernel module load request {2.6}
+ 130 = /dev/watchdog Watchdog timer port
+ 131 = /dev/temperature Machine internal temperature
+ 132 = /dev/hwtrap Hardware fault trap
+ 133 = /dev/exttrp External device trap
+ 134 = /dev/apm_bios Advanced Power Management BIOS
+ 135 = /dev/rtc Real Time Clock
+ 139 = /dev/openprom SPARC OpenBoot PROM
+ 140 = /dev/relay8 Berkshire Products Octal relay card
+ 141 = /dev/relay16 Berkshire Products ISO-16 relay card
+ 142 = /dev/msr x86 model-specific registers {2.6}
+ 143 = /dev/pciconf PCI configuration space
+ 144 = /dev/nvram Non-volatile configuration RAM
+ 145 = /dev/hfmodem Soundcard shortwave modem control {2.6}
+ 146 = /dev/graphics Linux/SGI graphics device
+ 147 = /dev/opengl Linux/SGI OpenGL pipe
+ 148 = /dev/gfx Linux/SGI graphics effects device
+ 149 = /dev/input/mouse Linux/SGI Irix emulation mouse
+ 150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
+ 151 = /dev/led Front panel LEDs
+ 152 = /dev/kpoll Kernel Poll Driver
+ 153 = /dev/mergemem Memory merge device
+ 154 = /dev/pmu Macintosh PowerBook power manager
+ 155 = /dev/isictl MultiTech ISICom serial control
+ 156 = /dev/lcd Front panel LCD display
+ 157 = /dev/ac Applicom Intl Profibus card
+ 158 = /dev/nwbutton Netwinder external button
+ 159 = /dev/nwdebug Netwinder debug interface
+ 160 = /dev/nwflash Netwinder flash memory
+ 161 = /dev/userdma User-space DMA access
+ 162 = /dev/smbus System Management Bus
+ 163 = /dev/lik Logitech Internet Keyboard
+ 164 = /dev/ipmo Intel Intelligent Platform Management
+ 165 = /dev/vmmon VMWare virtual machine monitor
+ 166 = /dev/i2o/ctl I2O configuration manager
+ 167 = /dev/specialix_sxctl Specialix serial control
+ 168 = /dev/tcldrv Technology Concepts serial control
+ 169 = /dev/specialix_rioctl Specialix RIO serial control
+ 170 = /dev/thinkpad/thinkpad IBM Thinkpad devices
+ 171 = /dev/srripc QNX4 API IPC manager
+ 172 = /dev/usemaclone Semaphore clone device
+ 173 = /dev/ipmikcs Intelligent Platform Management
+ 174 = /dev/uctrl SPARCbook 3 microcontroller
+ 175 = /dev/agpgart AGP Graphics Address Remapping Table
+ 176 = /dev/gtrsc Gorgy Timing radio clock
+ 177 = /dev/cbm Serial CBM bus
+ 178 = /dev/jsflash JavaStation OS flash SIMM
+ 179 = /dev/xsvc High-speed shared-mem/semaphore service
+ 180 = /dev/vrbuttons Vr41xx button input device
+ 181 = /dev/toshiba Toshiba laptop SMM support
+ 182 = /dev/perfctr Performance-monitoring counters
+ 183 = /dev/hwrng Generic random number generator
+ 184 = /dev/cpu/microcode CPU microcode update interface
+ 186 = /dev/atomicps Atomic shapshot of process state data
+ 187 = /dev/irnet IrNET device
+ 188 = /dev/smbusbios SMBus BIOS
+ 189 = /dev/ussp_ctl User space serial port control
+ 190 = /dev/crash Mission Critical Linux crash dump facility
+ 191 = /dev/pcl181 <information missing>
+ 192 = /dev/nas_xbus NAS xbus LCD/buttons access
+ 193 = /dev/d7s SPARC 7-segment display
+ 194 = /dev/zkshim Zero-Knowledge network shim control
+ 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
+ 198 = /dev/sexec Signed executable interface
+ 199 = /dev/scanners/cuecat :CueCat barcode scanner
+ 200 = /dev/net/tun TAP/TUN network device
+ 201 = /dev/button/gulpb Transmeta GULP-B buttons
+ 202 = /dev/emd/ctl Enhanced Metadisk RAID (EMD) control
+ 204 = /dev/video/em8300 EM8300 DVD decoder control
+ 205 = /dev/video/em8300_mv EM8300 DVD decoder video
+ 206 = /dev/video/em8300_ma EM8300 DVD decoder audio
+ 207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
+ 208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
+ 209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
+ 210 = /dev/impi/bt IMPI coprocessor block transfer
+ 211 = /dev/impi/smic IMPI coprocessor stream interface
+ 212 = /dev/watchdogs/0 First watchdog device
+ 213 = /dev/watchdogs/1 Second watchdog device
+ 214 = /dev/watchdogs/2 Third watchdog device
+ 215 = /dev/watchdogs/3 Fourth watchdog device
+ 216 = /dev/fujitsu/apanel Fujitsu/Siemens application panel
+ 217 = /dev/ni/natmotn National Instruments Motion
+ 218 = /dev/kchuid Inter-process chuid control
+ 219 = /dev/modems/mwave MWave modem firmware upload
+ 220 = /dev/mptctl Message passing technology (MPT) control
+ 221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
+ 222 = /dev/mvista/hasi Montavista PICMG high availability
+ 223 = /dev/input/uinput User level driver support for input
+ 224 = /dev/tpm TCPA TPM driver
+ 225 = /dev/pps Pulse Per Second driver
+ 226 = /dev/systrace Systrace device
+ 227 = /dev/mcelog X86_64 Machine Check Exception driver
+ 228 = /dev/hpet HPET driver
+ 229 = /dev/fuse Fuse (virtual filesystem in user-space)
+ 230 = /dev/midishare MidiShare driver
+ 240-254 Reserved for local use
+ 255 Reserved for MISC_DYNAMIC_MINOR
+
+ 11 char Raw keyboard device (Linux/SPARC only)
+ 0 = /dev/kbd Raw keyboard device
+
+ 11 char Serial Mux device (Linux/PA-RISC only)
+ 0 = /dev/ttyB0 First mux port
+ 1 = /dev/ttyB1 Second mux port
+ ...
+
+ 11 block SCSI CD-ROM devices
+ 0 = /dev/scd0 First SCSI CD-ROM
+ 1 = /dev/scd1 Second SCSI CD-ROM
+ ...
+
+ The prefix /dev/sr (instead of /dev/scd) has been deprecated.
+
+ 12 char QIC-02 tape
+ 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
+ 3 = /dev/tpqic11 QIC-11, rewind-on-close
+ 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
+ 5 = /dev/tpqic24 QIC-24, rewind-on-close
+ 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
+ 7 = /dev/tpqic120 QIC-120, rewind-on-close
+ 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
+ 9 = /dev/tpqic150 QIC-150, rewind-on-close
+
+ The device names specified are proposed -- if there
+ are "standard" names for these devices, please let me know.
+
+ 12 block MSCDEX CD-ROM callback support {2.6}
+ 0 = /dev/dos_cd0 First MSCDEX CD-ROM
+ 1 = /dev/dos_cd1 Second MSCDEX CD-ROM
+ ...
+
+ 13 char Input core
+ 0 = /dev/input/js0 First joystick
+ 1 = /dev/input/js1 Second joystick
+ ...
+ 32 = /dev/input/mouse0 First mouse
+ 33 = /dev/input/mouse1 Second mouse
+ ...
+ 63 = /dev/input/mice Unified mouse
+ 64 = /dev/input/event0 First event queue
+ 65 = /dev/input/event1 Second event queue
+ ...
+
+ Each device type has 5 bits (32 minors).
+
+ 13 block 8-bit MFM/RLL/IDE controller
+ 0 = /dev/xda First XT disk whole disk
+ 64 = /dev/xdb Second XT disk whole disk
+
+ Partitions are handled in the same way as IDE disks
+ (see major number 3).
+
+ 14 char Open Sound System (OSS)
+ 0 = /dev/mixer Mixer control
+ 1 = /dev/sequencer Audio sequencer
+ 2 = /dev/midi00 First MIDI port
+ 3 = /dev/dsp Digital audio
+ 4 = /dev/audio Sun-compatible digital audio
+ 6 = /dev/sndstat Sound card status information {2.6}
+ 7 = /dev/audioctl SPARC audio control device
+ 8 = /dev/sequencer2 Sequencer -- alternate device
+ 16 = /dev/mixer1 Second soundcard mixer control
+ 17 = /dev/patmgr0 Sequencer patch manager
+ 18 = /dev/midi01 Second MIDI port
+ 19 = /dev/dsp1 Second soundcard digital audio
+ 20 = /dev/audio1 Second soundcard Sun digital audio
+ 33 = /dev/patmgr1 Sequencer patch manager
+ 34 = /dev/midi02 Third MIDI port
+ 50 = /dev/midi03 Fourth MIDI port
+ 14 block BIOS harddrive callback support {2.6}
+ 0 = /dev/dos_hda First BIOS harddrive whole disk
+ 64 = /dev/dos_hdb Second BIOS harddrive whole disk
+ 128 = /dev/dos_hdc Third BIOS harddrive whole disk
+ 192 = /dev/dos_hdd Fourth BIOS harddrive whole disk
+
+ Partitions are handled in the same way as IDE disks
+ (see major number 3).
+
+ 15 char Joystick
+ 0 = /dev/js0 First analog joystick
+ 1 = /dev/js1 Second analog joystick
+ ...
+ 128 = /dev/djs0 First digital joystick
+ 129 = /dev/djs1 Second digital joystick
+ ...
+ 15 block Sony CDU-31A/CDU-33A CD-ROM
+ 0 = /dev/sonycd Sony CDU-31a CD-ROM
+
+ 16 char Non-SCSI scanners
+ 0 = /dev/gs4500 Genius 4500 handheld scanner
+ 16 block GoldStar CD-ROM
+ 0 = /dev/gscd GoldStar CD-ROM
+
+ 17 char Chase serial card
+ 0 = /dev/ttyH0 First Chase port
+ 1 = /dev/ttyH1 Second Chase port
+ ...
+ 17 block Optics Storage CD-ROM
+ 0 = /dev/optcd Optics Storage CD-ROM
+
+ 18 char Chase serial card - alternate devices
+ 0 = /dev/cuh0 Callout device for ttyH0
+ 1 = /dev/cuh1 Callout device for ttyH1
+ ...
+ 18 block Sanyo CD-ROM
+ 0 = /dev/sjcd Sanyo CD-ROM
+
+ 19 char Cyclades serial card
+ 0 = /dev/ttyC0 First Cyclades port
+ ...
+ 31 = /dev/ttyC31 32nd Cyclades port
+ 19 block "Double" compressed disk
+ 0 = /dev/double0 First compressed disk
+ ...
+ 7 = /dev/double7 Eighth compressed disk
+ 128 = /dev/cdouble0 Mirror of first compressed disk
+ ...
+ 135 = /dev/cdouble7 Mirror of eighth compressed disk
+
+ See the Double documentation for the meaning of the
+ mirror devices.
+
+ 20 char Cyclades serial card - alternate devices
+ 0 = /dev/cub0 Callout device for ttyC0
+ ...
+ 31 = /dev/cub31 Callout device for ttyC31
+ 20 block Hitachi CD-ROM (under development)
+ 0 = /dev/hitcd Hitachi CD-ROM
+
+ 21 char Generic SCSI access
+ 0 = /dev/sg0 First generic SCSI device
+ 1 = /dev/sg1 Second generic SCSI device
+ ...
+
+ Most distributions name these /dev/sga, /dev/sgb...;
+ this sets an unnecessary limit of 26 SCSI devices in
+ the system and is counter to standard Linux
+ device-naming practice.
+
+ 21 block Acorn MFM hard drive interface
+ 0 = /dev/mfma First MFM drive whole disk
+ 64 = /dev/mfmb Second MFM drive whole disk
+
+ This device is used on the ARM-based Acorn RiscPC.
+ Partitions are handled the same way as for IDE disks
+ (see major number 3).
+
+ 22 char Digiboard serial card
+ 0 = /dev/ttyD0 First Digiboard port
+ 1 = /dev/ttyD1 Second Digiboard port
+ ...
+ 22 block Second IDE hard disk/CD-ROM interface
+ 0 = /dev/hdc Master: whole disk (or CD-ROM)
+ 64 = /dev/hdd Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 23 char Digiboard serial card - alternate devices
+ 0 = /dev/cud0 Callout device for ttyD0
+ 1 = /dev/cud1 Callout device for ttyD1
+ ...
+ 23 block Mitsumi proprietary CD-ROM
+ 0 = /dev/mcd Mitsumi CD-ROM
+
+ 24 char Stallion serial card
+ 0 = /dev/ttyE0 Stallion port 0 card 0
+ 1 = /dev/ttyE1 Stallion port 1 card 0
+ ...
+ 64 = /dev/ttyE64 Stallion port 0 card 1
+ 65 = /dev/ttyE65 Stallion port 1 card 1
+ ...
+ 128 = /dev/ttyE128 Stallion port 0 card 2
+ 129 = /dev/ttyE129 Stallion port 1 card 2
+ ...
+ 192 = /dev/ttyE192 Stallion port 0 card 3
+ 193 = /dev/ttyE193 Stallion port 1 card 3
+ ...
+ 24 block Sony CDU-535 CD-ROM
+ 0 = /dev/cdu535 Sony CDU-535 CD-ROM
+
+ 25 char Stallion serial card - alternate devices
+ 0 = /dev/cue0 Callout device for ttyE0
+ 1 = /dev/cue1 Callout device for ttyE1
+ ...
+ 64 = /dev/cue64 Callout device for ttyE64
+ 65 = /dev/cue65 Callout device for ttyE65
+ ...
+ 128 = /dev/cue128 Callout device for ttyE128
+ 129 = /dev/cue129 Callout device for ttyE129
+ ...
+ 192 = /dev/cue192 Callout device for ttyE192
+ 193 = /dev/cue193 Callout device for ttyE193
+ ...
+ 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
+ 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
+ 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
+ 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
+ 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
+
+ 26 char Quanta WinVision frame grabber {2.6}
+ 0 = /dev/wvisfgrab Quanta WinVision frame grabber
+ 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
+ 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
+ 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
+ 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
+ 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
+
+ 27 char QIC-117 tape
+ 0 = /dev/qft0 Unit 0, rewind-on-close
+ 1 = /dev/qft1 Unit 1, rewind-on-close
+ 2 = /dev/qft2 Unit 2, rewind-on-close
+ 3 = /dev/qft3 Unit 3, rewind-on-close
+ 4 = /dev/nqft0 Unit 0, no rewind-on-close
+ 5 = /dev/nqft1 Unit 1, no rewind-on-close
+ 6 = /dev/nqft2 Unit 2, no rewind-on-close
+ 7 = /dev/nqft3 Unit 3, no rewind-on-close
+ 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
+ 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
+ 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
+ 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
+ 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
+ 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
+ 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
+ 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
+ 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
+ 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
+ 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
+ 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
+ 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
+ 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
+ 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
+ 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
+ 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
+ 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
+ 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
+ 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
+ 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
+
+ 28 char Stallion serial card - card programming
+ 0 = /dev/staliomem0 First Stallion card I/O memory
+ 1 = /dev/staliomem1 Second Stallion card I/O memory
+ 2 = /dev/staliomem2 Third Stallion card I/O memory
+ 3 = /dev/staliomem3 Fourth Stallion card I/O memory
+ 28 char Atari SLM ACSI laser printer (68k/Atari)
+ 0 = /dev/slm0 First SLM laser printer
+ 1 = /dev/slm1 Second SLM laser printer
+ ...
+ 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
+ 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
+ 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
+ 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
+ 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
+ 28 block ACSI disk (68k/Atari)
+ 0 = /dev/ada First ACSI disk whole disk
+ 16 = /dev/adb Second ACSI disk whole disk
+ 32 = /dev/adc Third ACSI disk whole disk
+ ...
+ 240 = /dev/adp 16th ACSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15, like SCSI.
+
+ 29 char Universal frame buffer
+ 0 = /dev/fb0 First frame buffer
+ 1 = /dev/fb1 Second frame buffer
+ ...
+ 31 = /dev/fb31 32nd frame buffer
+
+ 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
+ 0 = /dev/aztcd Aztech CD-ROM
+
+ 30 char iBCS-2 compatibility devices
+ 0 = /dev/socksys Socket access
+ 1 = /dev/spx SVR3 local X interface
+ 32 = /dev/inet/ip Network access
+ 33 = /dev/inet/icmp
+ 34 = /dev/inet/ggp
+ 35 = /dev/inet/ipip
+ 36 = /dev/inet/tcp
+ 37 = /dev/inet/egp
+ 38 = /dev/inet/pup
+ 39 = /dev/inet/udp
+ 40 = /dev/inet/idp
+ 41 = /dev/inet/rawip
+
+ Additionally, iBCS-2 requires the following links:
+
+ /dev/ip -> /dev/inet/ip
+ /dev/icmp -> /dev/inet/icmp
+ /dev/ggp -> /dev/inet/ggp
+ /dev/ipip -> /dev/inet/ipip
+ /dev/tcp -> /dev/inet/tcp
+ /dev/egp -> /dev/inet/egp
+ /dev/pup -> /dev/inet/pup
+ /dev/udp -> /dev/inet/udp
+ /dev/idp -> /dev/inet/idp
+ /dev/rawip -> /dev/inet/rawip
+ /dev/inet/arp -> /dev/inet/udp
+ /dev/inet/rip -> /dev/inet/udp
+ /dev/nfsd -> /dev/socksys
+ /dev/X0R -> /dev/null (? apparently not required ?)
+
+ 30 block Philips LMS CM-205 CD-ROM
+ 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
+
+ /dev/lmscd is an older name for this device. This
+ driver does not work with the CM-205MS CD-ROM.
+
+ 31 char MPU-401 MIDI
+ 0 = /dev/mpu401data MPU-401 data port
+ 1 = /dev/mpu401stat MPU-401 status port
+ 31 block ROM/flash memory card
+ 0 = /dev/rom0 First ROM card (rw)
+ ...
+ 7 = /dev/rom7 Eighth ROM card (rw)
+ 8 = /dev/rrom0 First ROM card (ro)
+ ...
+ 15 = /dev/rrom7 Eighth ROM card (ro)
+ 16 = /dev/flash0 First flash memory card (rw)
+ ...
+ 23 = /dev/flash7 Eighth flash memory card (rw)
+ 24 = /dev/rflash0 First flash memory card (ro)
+ ...
+ 31 = /dev/rflash7 Eighth flash memory card (ro)
+
+ The read-write (rw) devices support back-caching
+ written data in RAM, as well as writing to flash RAM
+ devices. The read-only devices (ro) support reading
+ only.
+
+ 32 char Specialix serial card
+ 0 = /dev/ttyX0 First Specialix port
+ 1 = /dev/ttyX1 Second Specialix port
+ ...
+ 32 block Philips LMS CM-206 CD-ROM
+ 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
+
+ 33 char Specialix serial card - alternate devices
+ 0 = /dev/cux0 Callout device for ttyX0
+ 1 = /dev/cux1 Callout device for ttyX1
+ ...
+ 33 block Third IDE hard disk/CD-ROM interface
+ 0 = /dev/hde Master: whole disk (or CD-ROM)
+ 64 = /dev/hdf Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 34 char Z8530 HDLC driver
+ 0 = /dev/scc0 First Z8530, first port
+ 1 = /dev/scc1 First Z8530, second port
+ 2 = /dev/scc2 Second Z8530, first port
+ 3 = /dev/scc3 Second Z8530, second port
+ ...
+
+ In a previous version these devices were named
+ /dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
+ on.
+
+ 34 block Fourth IDE hard disk/CD-ROM interface
+ 0 = /dev/hdg Master: whole disk (or CD-ROM)
+ 64 = /dev/hdh Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 35 char tclmidi MIDI driver
+ 0 = /dev/midi0 First MIDI port, kernel timed
+ 1 = /dev/midi1 Second MIDI port, kernel timed
+ 2 = /dev/midi2 Third MIDI port, kernel timed
+ 3 = /dev/midi3 Fourth MIDI port, kernel timed
+ 64 = /dev/rmidi0 First MIDI port, untimed
+ 65 = /dev/rmidi1 Second MIDI port, untimed
+ 66 = /dev/rmidi2 Third MIDI port, untimed
+ 67 = /dev/rmidi3 Fourth MIDI port, untimed
+ 128 = /dev/smpte0 First MIDI port, SMPTE timed
+ 129 = /dev/smpte1 Second MIDI port, SMPTE timed
+ 130 = /dev/smpte2 Third MIDI port, SMPTE timed
+ 131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
+ 35 block Slow memory ramdisk
+ 0 = /dev/slram Slow memory ramdisk
+
+ 36 char Netlink support
+ 0 = /dev/route Routing, device updates, kernel to user
+ 1 = /dev/skip enSKIP security cache control
+ 3 = /dev/fwmonitor Firewall packet copies
+ 16 = /dev/tap0 First Ethertap device
+ ...
+ 31 = /dev/tap15 16th Ethertap device
+ 36 block MCA ESDI hard disk
+ 0 = /dev/eda First ESDI disk whole disk
+ 64 = /dev/edb Second ESDI disk whole disk
+ ...
+
+ Partitions are handled in the same way as IDE disks
+ (see major number 3).
+
+ 37 char IDE tape
+ 0 = /dev/ht0 First IDE tape
+ 1 = /dev/ht1 Second IDE tape
+ ...
+ 128 = /dev/nht0 First IDE tape, no rewind-on-close
+ 129 = /dev/nht1 Second IDE tape, no rewind-on-close
+ ...
+
+ Currently, only one IDE tape drive is supported.
+
+ 37 block Zorro II ramdisk
+ 0 = /dev/z2ram Zorro II ramdisk
+
+ 38 char Myricom PCI Myrinet board
+ 0 = /dev/mlanai0 First Myrinet board
+ 1 = /dev/mlanai1 Second Myrinet board
+ ...
+
+ This device is used for status query, board control
+ and "user level packet I/O." This board is also
+ accessible as a standard networking "eth" device.
+
+ 38 block Reserved for Linux/AP+
+
+ 39 char ML-16P experimental I/O board
+ 0 = /dev/ml16pa-a0 First card, first analog channel
+ 1 = /dev/ml16pa-a1 First card, second analog channel
+ ...
+ 15 = /dev/ml16pa-a15 First card, 16th analog channel
+ 16 = /dev/ml16pa-d First card, digital lines
+ 17 = /dev/ml16pa-c0 First card, first counter/timer
+ 18 = /dev/ml16pa-c1 First card, second counter/timer
+ 19 = /dev/ml16pa-c2 First card, third counter/timer
+ 32 = /dev/ml16pb-a0 Second card, first analog channel
+ 33 = /dev/ml16pb-a1 Second card, second analog channel
+ ...
+ 47 = /dev/ml16pb-a15 Second card, 16th analog channel
+ 48 = /dev/ml16pb-d Second card, digital lines
+ 49 = /dev/ml16pb-c0 Second card, first counter/timer
+ 50 = /dev/ml16pb-c1 Second card, second counter/timer
+ 51 = /dev/ml16pb-c2 Second card, third counter/timer
+ ...
+ 39 block Reserved for Linux/AP+
+
+ 40 char Matrox Meteor frame grabber {2.6}
+ 0 = /dev/mmetfgrab Matrox Meteor frame grabber
+ 40 block Syquest EZ135 parallel port removable drive
+ 0 = /dev/eza Parallel EZ135 drive, whole disk
+
+ This device is obsolete and will be removed in a
+ future version of Linux. It has been replaced with
+ the parallel port IDE disk driver at major number 45.
+ Partitions are handled in the same way as IDE disks
+ (see major number 3).
+
+ 41 char Yet Another Micro Monitor
+ 0 = /dev/yamm Yet Another Micro Monitor
+ 41 block MicroSolutions BackPack parallel port CD-ROM
+ 0 = /dev/bpcd BackPack CD-ROM
+
+ This device is obsolete and will be removed in a
+ future version of Linux. It has been replaced with
+ the parallel port ATAPI CD-ROM driver at major number 46.
+
+ 42 char Demo/sample use
+ 42 block Demo/sample use
+
+ This number is intended for use in sample code, as
+ well as a general "example" device number. It
+ should never be used for a device driver that is being
+ distributed; either obtain an official number or use
+ the local/experimental range. The sudden addition or
+ removal of a driver with this number should not cause
+ ill effects to the system (bugs excepted.)
+
+ IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
+ DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
+
+ 43 char isdn4linux virtual modem
+ 0 = /dev/ttyI0 First virtual modem
+ ...
+ 63 = /dev/ttyI63 64th virtual modem
+ 43 block Network block devices
+ 0 = /dev/nb0 First network block device
+ 1 = /dev/nb1 Second network block device
+ ...
+
+ Network Block Device is somehow similar to loopback
+ devices: If you read from it, it sends packet across
+ network asking server for data. If you write to it, it
+ sends packet telling server to write. It could be used
+ to mounting filesystems over the net, swapping over
+ the net, implementing block device in userland etc.
+
+ 44 char isdn4linux virtual modem - alternate devices
+ 0 = /dev/cui0 Callout device for ttyI0
+ ...
+ 63 = /dev/cui63 Callout device for ttyI63
+ 44 block Flash Translation Layer (FTL) filesystems
+ 0 = /dev/ftla FTL on first Memory Technology Device
+ 16 = /dev/ftlb FTL on second Memory Technology Device
+ 32 = /dev/ftlc FTL on third Memory Technology Device
+ ...
+ 240 = /dev/ftlp FTL on 16th Memory Technology Device
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) expect that the partition
+ limit is 15 rather than 63 per disk (same as SCSI.)
+
+ 45 char isdn4linux ISDN BRI driver
+ 0 = /dev/isdn0 First virtual B channel raw data
+ ...
+ 63 = /dev/isdn63 64th virtual B channel raw data
+ 64 = /dev/isdnctrl0 First channel control/debug
+ ...
+ 127 = /dev/isdnctrl63 64th channel control/debug
+
+ 128 = /dev/ippp0 First SyncPPP device
+ ...
+ 191 = /dev/ippp63 64th SyncPPP device
+
+ 255 = /dev/isdninfo ISDN monitor interface
+ 45 block Parallel port IDE disk devices
+ 0 = /dev/pda First parallel port IDE disk
+ 16 = /dev/pdb Second parallel port IDE disk
+ 32 = /dev/pdc Third parallel port IDE disk
+ 48 = /dev/pdd Fourth parallel port IDE disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the partition
+ limit is 15 rather than 63 per disk.
+
+ 46 char Comtrol Rocketport serial card
+ 0 = /dev/ttyR0 First Rocketport port
+ 1 = /dev/ttyR1 Second Rocketport port
+ ...
+ 46 block Parallel port ATAPI CD-ROM devices
+ 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
+ 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
+ 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
+ 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
+
+ 47 char Comtrol Rocketport serial card - alternate devices
+ 0 = /dev/cur0 Callout device for ttyR0
+ 1 = /dev/cur1 Callout device for ttyR1
+ ...
+ 47 block Parallel port ATAPI disk devices
+ 0 = /dev/pf0 First parallel port ATAPI disk
+ 1 = /dev/pf1 Second parallel port ATAPI disk
+ 2 = /dev/pf2 Third parallel port ATAPI disk
+ 3 = /dev/pf3 Fourth parallel port ATAPI disk
+
+ This driver is intended for floppy disks and similar
+ devices and hence does not support partitioning.
+
+ 48 char SDL RISCom serial card
+ 0 = /dev/ttyL0 First RISCom port
+ 1 = /dev/ttyL1 Second RISCom port
+ ...
+ 48 block Mylex DAC960 PCI RAID controller; first controller
+ 0 = /dev/rd/c0d0 First disk, whole disk
+ 8 = /dev/rd/c0d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c0d31 32nd disk, whole disk
+
+ For partitions add:
+ 0 = /dev/rd/c?d? Whole disk
+ 1 = /dev/rd/c?d?p1 First partition
+ ...
+ 7 = /dev/rd/c?d?p7 Seventh partition
+
+ 49 char SDL RISCom serial card - alternate devices
+ 0 = /dev/cul0 Callout device for ttyL0
+ 1 = /dev/cul1 Callout device for ttyL1
+ ...
+ 49 block Mylex DAC960 PCI RAID controller; second controller
+ 0 = /dev/rd/c1d0 First disk, whole disk
+ 8 = /dev/rd/c1d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c1d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+ 50 char Reserved for GLINT
+
+ 50 block Mylex DAC960 PCI RAID controller; third controller
+ 0 = /dev/rd/c2d0 First disk, whole disk
+ 8 = /dev/rd/c2d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c2d31 32nd disk, whole disk
+
+ 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
+ 0 = /dev/bc0 First Baycom radio modem
+ 1 = /dev/bc1 Second Baycom radio modem
+ ...
+ 51 block Mylex DAC960 PCI RAID controller; fourth controller
+ 0 = /dev/rd/c3d0 First disk, whole disk
+ 8 = /dev/rd/c3d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c3d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+ 52 char Spellcaster DataComm/BRI ISDN card
+ 0 = /dev/dcbri0 First DataComm card
+ 1 = /dev/dcbri1 Second DataComm card
+ 2 = /dev/dcbri2 Third DataComm card
+ 3 = /dev/dcbri3 Fourth DataComm card
+ 52 block Mylex DAC960 PCI RAID controller; fifth controller
+ 0 = /dev/rd/c4d0 First disk, whole disk
+ 8 = /dev/rd/c4d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c4d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+ 53 char BDM interface for remote debugging MC683xx microcontrollers
+ 0 = /dev/pd_bdm0 PD BDM interface on lp0
+ 1 = /dev/pd_bdm1 PD BDM interface on lp1
+ 2 = /dev/pd_bdm2 PD BDM interface on lp2
+ 4 = /dev/icd_bdm0 ICD BDM interface on lp0
+ 5 = /dev/icd_bdm1 ICD BDM interface on lp1
+ 6 = /dev/icd_bdm2 ICD BDM interface on lp2
+
+ This device is used for the interfacing to the MC683xx
+ microcontrollers via Background Debug Mode by use of a
+ Parallel Port interface. PD is the Motorola Public
+ Domain Interface and ICD is the commercial interface
+ by P&E.
+
+ 53 block Mylex DAC960 PCI RAID controller; sixth controller
+ 0 = /dev/rd/c5d0 First disk, whole disk
+ 8 = /dev/rd/c5d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c5d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+ 54 char Electrocardiognosis Holter serial card
+ 0 = /dev/holter0 First Holter port
+ 1 = /dev/holter1 Second Holter port
+ 2 = /dev/holter2 Third Holter port
+
+ A custom serial card used by Electrocardiognosis SRL
+ <mseritan@ottonel.pub.ro> to transfer data from Holter
+ 24-hour heart monitoring equipment.
+
+ 54 block Mylex DAC960 PCI RAID controller; seventh controller
+ 0 = /dev/rd/c6d0 First disk, whole disk
+ 8 = /dev/rd/c6d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c6d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+ 55 char DSP56001 digital signal processor
+ 0 = /dev/dsp56k First DSP56001
+ 55 block Mylex DAC960 PCI RAID controller; eigth controller
+ 0 = /dev/rd/c7d0 First disk, whole disk
+ 8 = /dev/rd/c7d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c7d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+ 56 char Apple Desktop Bus
+ 0 = /dev/adb ADB bus control
+
+ Additional devices will be added to this number, all
+ starting with /dev/adb.
+
+ 56 block Fifth IDE hard disk/CD-ROM interface
+ 0 = /dev/hdi Master: whole disk (or CD-ROM)
+ 64 = /dev/hdj Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 57 char Hayes ESP serial card
+ 0 = /dev/ttyP0 First ESP port
+ 1 = /dev/ttyP1 Second ESP port
+ ...
+
+ 57 block Sixth IDE hard disk/CD-ROM interface
+ 0 = /dev/hdk Master: whole disk (or CD-ROM)
+ 64 = /dev/hdl Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 58 char Hayes ESP serial card - alternate devices
+ 0 = /dev/cup0 Callout device for ttyP0
+ 1 = /dev/cup1 Callout device for ttyP1
+ ...
+ 58 block Reserved for logical volume manager
+
+ 59 char sf firewall package
+ 0 = /dev/firewall Communication with sf kernel module
+
+ 59 block Generic PDA filesystem device
+ 0 = /dev/pda0 First PDA device
+ 1 = /dev/pda1 Second PDA device
+ ...
+
+ The pda devices are used to mount filesystems on
+ remote pda's (basically slow handheld machines with
+ proprietary OS's and limited memory and storage
+ running small fs translation drivers) through serial /
+ IRDA / parallel links.
+
+ NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
+
+ 60-63 char LOCAL/EXPERIMENTAL USE
+ 60-63 block LOCAL/EXPERIMENTAL USE
+ Allocated for local/experimental use. For devices not
+ assigned official numbers, these ranges should be
+ used in order to avoid conflicting with future assignments.
+
+ 64 char ENskip kernel encryption package
+ 0 = /dev/enskip Communication with ENskip kernel module
+
+ 64 block Scramdisk/DriveCrypt encrypted devices
+ 0 = /dev/scramdisk/master Master node for ioctls
+ 1 = /dev/scramdisk/1 First encrypted device
+ 2 = /dev/scramdisk/2 Second encrypted device
+ ...
+ 255 = /dev/scramdisk/255 255th encrypted device
+
+ The filename of the encrypted container and the passwords
+ are sent via ioctls (using the sdmount tool) to the master
+ node which then activates them via one of the
+ /dev/scramdisk/x nodes for loopback mounting (all handled
+ through the sdmount tool).
+
+ Requested by: andy@scramdisklinux.org
+
+ 65 char Sundance "plink" Transputer boards (obsolete, unused)
+ 0 = /dev/plink0 First plink device
+ 1 = /dev/plink1 Second plink device
+ 2 = /dev/plink2 Third plink device
+ 3 = /dev/plink3 Fourth plink device
+ 64 = /dev/rplink0 First plink device, raw
+ 65 = /dev/rplink1 Second plink device, raw
+ 66 = /dev/rplink2 Third plink device, raw
+ 67 = /dev/rplink3 Fourth plink device, raw
+ 128 = /dev/plink0d First plink device, debug
+ 129 = /dev/plink1d Second plink device, debug
+ 130 = /dev/plink2d Third plink device, debug
+ 131 = /dev/plink3d Fourth plink device, debug
+ 192 = /dev/rplink0d First plink device, raw, debug
+ 193 = /dev/rplink1d Second plink device, raw, debug
+ 194 = /dev/rplink2d Third plink device, raw, debug
+ 195 = /dev/rplink3d Fourth plink device, raw, debug
+
+ This is a commercial driver; contact James Howes
+ <jth@prosig.demon.co.uk> for information.
+
+ 65 block SCSI disk devices (16-31)
+ 0 = /dev/sdq 17th SCSI disk whole disk
+ 16 = /dev/sdr 18th SCSI disk whole disk
+ 32 = /dev/sds 19th SCSI disk whole disk
+ ...
+ 240 = /dev/sdaf 32nd SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 66 char YARC PowerPC PCI coprocessor card
+ 0 = /dev/yppcpci0 First YARC card
+ 1 = /dev/yppcpci1 Second YARC card
+ ...
+
+ 66 block SCSI disk devices (32-47)
+ 0 = /dev/sdag 33th SCSI disk whole disk
+ 16 = /dev/sdah 34th SCSI disk whole disk
+ 32 = /dev/sdai 35th SCSI disk whole disk
+ ...
+ 240 = /dev/sdav 48nd SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 67 char Coda network file system
+ 0 = /dev/cfs0 Coda cache manager
+
+ See http://www.coda.cs.cmu.edu for information about Coda.
+
+ 67 block SCSI disk devices (48-63)
+ 0 = /dev/sdaw 49th SCSI disk whole disk
+ 16 = /dev/sdax 50th SCSI disk whole disk
+ 32 = /dev/sday 51st SCSI disk whole disk
+ ...
+ 240 = /dev/sdbl 64th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 68 char CAPI 2.0 interface
+ 0 = /dev/capi20 Control device
+ 1 = /dev/capi20.00 First CAPI 2.0 application
+ 2 = /dev/capi20.01 Second CAPI 2.0 application
+ ...
+ 20 = /dev/capi20.19 19th CAPI 2.0 application
+
+ ISDN CAPI 2.0 driver for use with CAPI 2.0
+ applications; currently supports the AVM B1 card.
+
+ 68 block SCSI disk devices (64-79)
+ 0 = /dev/sdbm 65th SCSI disk whole disk
+ 16 = /dev/sdbn 66th SCSI disk whole disk
+ 32 = /dev/sdbo 67th SCSI disk whole disk
+ ...
+ 240 = /dev/sdcb 80th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 69 char MA16 numeric accelerator card
+ 0 = /dev/ma16 Board memory access
+
+ 69 block SCSI disk devices (80-95)
+ 0 = /dev/sdcc 81st SCSI disk whole disk
+ 16 = /dev/sdcd 82nd SCSI disk whole disk
+ 32 = /dev/sdce 83th SCSI disk whole disk
+ ...
+ 240 = /dev/sdcr 96th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 70 char SpellCaster Protocol Services Interface
+ 0 = /dev/apscfg Configuration interface
+ 1 = /dev/apsauth Authentication interface
+ 2 = /dev/apslog Logging interface
+ 3 = /dev/apsdbg Debugging interface
+ 64 = /dev/apsisdn ISDN command interface
+ 65 = /dev/apsasync Async command interface
+ 128 = /dev/apsmon Monitor interface
+
+ 70 block SCSI disk devices (96-111)
+ 0 = /dev/sdcs 97th SCSI disk whole disk
+ 16 = /dev/sdct 98th SCSI disk whole disk
+ 32 = /dev/sdcu 99th SCSI disk whole disk
+ ...
+ 240 = /dev/sddh 112nd SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 71 char Computone IntelliPort II serial card
+ 0 = /dev/ttyF0 IntelliPort II board 0, port 0
+ 1 = /dev/ttyF1 IntelliPort II board 0, port 1
+ ...
+ 63 = /dev/ttyF63 IntelliPort II board 0, port 63
+ 64 = /dev/ttyF64 IntelliPort II board 1, port 0
+ 65 = /dev/ttyF65 IntelliPort II board 1, port 1
+ ...
+ 127 = /dev/ttyF127 IntelliPort II board 1, port 63
+ 128 = /dev/ttyF128 IntelliPort II board 2, port 0
+ 129 = /dev/ttyF129 IntelliPort II board 2, port 1
+ ...
+ 191 = /dev/ttyF191 IntelliPort II board 2, port 63
+ 192 = /dev/ttyF192 IntelliPort II board 3, port 0
+ 193 = /dev/ttyF193 IntelliPort II board 3, port 1
+ ...
+ 255 = /dev/ttyF255 IntelliPort II board 3, port 63
+
+ 71 block SCSI disk devices (112-127)
+ 0 = /dev/sddi 113th SCSI disk whole disk
+ 16 = /dev/sddj 114th SCSI disk whole disk
+ 32 = /dev/sddk 115th SCSI disk whole disk
+ ...
+ 240 = /dev/sddx 128th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 72 char Computone IntelliPort II serial card - alternate devices
+ 0 = /dev/cuf0 Callout device for ttyF0
+ 1 = /dev/cuf1 Callout device for ttyF1
+ ...
+ 63 = /dev/cuf63 Callout device for ttyF63
+ 64 = /dev/cuf64 Callout device for ttyF64
+ 65 = /dev/cuf65 Callout device for ttyF65
+ ...
+ 127 = /dev/cuf127 Callout device for ttyF127
+ 128 = /dev/cuf128 Callout device for ttyF128
+ 129 = /dev/cuf129 Callout device for ttyF129
+ ...
+ 191 = /dev/cuf191 Callout device for ttyF191
+ 192 = /dev/cuf192 Callout device for ttyF192
+ 193 = /dev/cuf193 Callout device for ttyF193
+ ...
+ 255 = /dev/cuf255 Callout device for ttyF255
+
+ 72 block Compaq Intelligent Drive Array, first controller
+ 0 = /dev/ida/c0d0 First logical drive whole disk
+ 16 = /dev/ida/c0d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c0d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+ 73 char Computone IntelliPort II serial card - control devices
+ 0 = /dev/ip2ipl0 Loadware device for board 0
+ 1 = /dev/ip2stat0 Status device for board 0
+ 4 = /dev/ip2ipl1 Loadware device for board 1
+ 5 = /dev/ip2stat1 Status device for board 1
+ 8 = /dev/ip2ipl2 Loadware device for board 2
+ 9 = /dev/ip2stat2 Status device for board 2
+ 12 = /dev/ip2ipl3 Loadware device for board 3
+ 13 = /dev/ip2stat3 Status device for board 3
+
+ 73 block Compaq Intelligent Drive Array, second controller
+ 0 = /dev/ida/c1d0 First logical drive whole disk
+ 16 = /dev/ida/c1d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c1d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+ 74 char SCI bridge
+ 0 = /dev/SCI/0 SCI device 0
+ 1 = /dev/SCI/1 SCI device 1
+ ...
+
+ Currently for Dolphin Interconnect Solutions' PCI-SCI
+ bridge.
+
+ 74 block Compaq Intelligent Drive Array, third controller
+ 0 = /dev/ida/c2d0 First logical drive whole disk
+ 16 = /dev/ida/c2d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c2d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+ 75 char Specialix IO8+ serial card
+ 0 = /dev/ttyW0 First IO8+ port, first card
+ 1 = /dev/ttyW1 Second IO8+ port, first card
+ ...
+ 8 = /dev/ttyW8 First IO8+ port, second card
+ ...
+
+ 75 block Compaq Intelligent Drive Array, fourth controller
+ 0 = /dev/ida/c3d0 First logical drive whole disk
+ 16 = /dev/ida/c3d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c3d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+ 76 char Specialix IO8+ serial card - alternate devices
+ 0 = /dev/cuw0 Callout device for ttyW0
+ 1 = /dev/cuw1 Callout device for ttyW1
+ ...
+ 8 = /dev/cuw8 Callout device for ttyW8
+ ...
+
+ 76 block Compaq Intelligent Drive Array, fifth controller
+ 0 = /dev/ida/c4d0 First logical drive whole disk
+ 16 = /dev/ida/c4d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c4d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+
+ 77 char ComScire Quantum Noise Generator
+ 0 = /dev/qng ComScire Quantum Noise Generator
+
+ 77 block Compaq Intelligent Drive Array, sixth controller
+ 0 = /dev/ida/c5d0 First logical drive whole disk
+ 16 = /dev/ida/c5d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c5d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+
+ 78 char PAM Software's multimodem boards
+ 0 = /dev/ttyM0 First PAM modem
+ 1 = /dev/ttyM1 Second PAM modem
+ ...
+
+ 78 block Compaq Intelligent Drive Array, seventh controller
+ 0 = /dev/ida/c6d0 First logical drive whole disk
+ 16 = /dev/ida/c6d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c6d15 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+
+ 79 char PAM Software's multimodem boards - alternate devices
+ 0 = /dev/cum0 Callout device for ttyM0
+ 1 = /dev/cum1 Callout device for ttyM1
+ ...
+
+ 79 block Compaq Intelligent Drive Array, eigth controller
+ 0 = /dev/ida/c7d0 First logical drive whole disk
+ 16 = /dev/ida/c7d1 Second logical drive whole disk
+ ...
+ 240 = /dev/ida/c715 16th logical drive whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+
+ 80 char Photometrics AT200 CCD camera
+ 0 = /dev/at200 Photometrics AT200 CCD camera
+
+ 80 block I2O hard disk
+ 0 = /dev/i2o/hda First I2O hard disk, whole disk
+ 16 = /dev/i2o/hdb Second I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hdp 16th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 81 char video4linux
+ 0 = /dev/video0 Video capture/overlay device
+ ...
+ 63 = /dev/video63 Video capture/overlay device
+ 64 = /dev/radio0 Radio device
+ ...
+ 127 = /dev/radio63 Radio device
+ 192 = /dev/vtx0 Teletext device
+ ...
+ 223 = /dev/vtx31 Teletext device
+ 224 = /dev/vbi0 Vertical blank interrupt
+ ...
+ 255 = /dev/vbi31 Vertical blank interrupt
+
+ 81 block I2O hard disk
+ 0 = /dev/i2o/hdq 17th I2O hard disk, whole disk
+ 16 = /dev/i2o/hdr 18th I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hdaf 32nd I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 82 char WiNRADiO communications receiver card
+ 0 = /dev/winradio0 First WiNRADiO card
+ 1 = /dev/winradio1 Second WiNRADiO card
+ ...
+
+ The driver and documentation may be obtained from
+ http://www.proximity.com.au/~brian/winradio/
+
+ 82 block I2O hard disk
+ 0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
+ 16 = /dev/i2o/hdah 34th I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hdav 48th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 83 char Matrox mga_vid video driver
+ 0 = /dev/mga_vid0 1st video card
+ 1 = /dev/mga_vid1 2nd video card
+ 2 = /dev/mga_vid2 3rd video card
+ ...
+ 15 = /dev/mga_vid15 16th video card
+
+ 83 block I2O hard disk
+ 0 = /dev/i2o/hdaw 49th I2O hard disk, whole disk
+ 16 = /dev/i2o/hdax 50th I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hdbl 64th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 84 char Ikon 1011[57] Versatec Greensheet Interface
+ 0 = /dev/ihcp0 First Greensheet port
+ 1 = /dev/ihcp1 Second Greensheet port
+
+ 84 block I2O hard disk
+ 0 = /dev/i2o/hdbm 65th I2O hard disk, whole disk
+ 16 = /dev/i2o/hdbn 66th I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hdcb 80th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 85 char Linux/SGI shared memory input queue
+ 0 = /dev/shmiq Master shared input queue
+ 1 = /dev/qcntl0 First device pushed
+ 2 = /dev/qcntl1 Second device pushed
+ ...
+
+ 85 block I2O hard disk
+ 0 = /dev/i2o/hdcc 81st I2O hard disk, whole disk
+ 16 = /dev/i2o/hdcd 82nd I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hdcr 96th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 86 char SCSI media changer
+ 0 = /dev/sch0 First SCSI media changer
+ 1 = /dev/sch1 Second SCSI media changer
+ ...
+
+ 86 block I2O hard disk
+ 0 = /dev/i2o/hdcs 97th I2O hard disk, whole disk
+ 16 = /dev/i2o/hdct 98th I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hddh 112th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 87 char Sony Control-A1 stereo control bus
+ 0 = /dev/controla0 First device on chain
+ 1 = /dev/controla1 Second device on chain
+ ...
+
+ 87 block I2O hard disk
+ 0 = /dev/i2o/hddi 113rd I2O hard disk, whole disk
+ 16 = /dev/i2o/hddj 114th I2O hard disk, whole disk
+ ...
+ 240 = /dev/i2o/hddx 128th I2O hard disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 88 char COMX synchronous serial card
+ 0 = /dev/comx0 COMX channel 0
+ 1 = /dev/comx1 COMX channel 1
+ ...
+
+ 88 block Seventh IDE hard disk/CD-ROM interface
+ 0 = /dev/hdm Master: whole disk (or CD-ROM)
+ 64 = /dev/hdn Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 89 char I2C bus interface
+ 0 = /dev/i2c-0 First I2C adapter
+ 1 = /dev/i2c-1 Second I2C adapter
+ ...
+
+ 89 block Eighth IDE hard disk/CD-ROM interface
+ 0 = /dev/hdo Master: whole disk (or CD-ROM)
+ 64 = /dev/hdp Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 90 char Memory Technology Device (RAM, ROM, Flash)
+ 0 = /dev/mtd0 First MTD (rw)
+ 1 = /dev/mtdr0 First MTD (ro)
+ ...
+ 30 = /dev/mtd15 16th MTD (rw)
+ 31 = /dev/mtdr15 16th MTD (ro)
+
+ 90 block Ninth IDE hard disk/CD-ROM interface
+ 0 = /dev/hdq Master: whole disk (or CD-ROM)
+ 64 = /dev/hdr Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 91 char CAN-Bus devices
+ 0 = /dev/can0 First CAN-Bus controller
+ 1 = /dev/can1 Second CAN-Bus controller
+ ...
+
+ 91 block Tenth IDE hard disk/CD-ROM interface
+ 0 = /dev/hds Master: whole disk (or CD-ROM)
+ 64 = /dev/hdt Slave: whole disk (or CD-ROM)
+
+ Partitions are handled the same way as for the first
+ interface (see major number 3).
+
+ 92 char Reserved for ith Kommunikationstechnik MIC ISDN card
+
+ 92 block PPDD encrypted disk driver
+ 0 = /dev/ppdd0 First encrypted disk
+ 1 = /dev/ppdd1 Second encrypted disk
+ ...
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ 93 char IBM Smart Capture Card frame grabber {2.6}
+ 0 = /dev/iscc0 First Smart Capture Card
+ 1 = /dev/iscc1 Second Smart Capture Card
+ ...
+ 128 = /dev/isccctl0 First Smart Capture Card control
+ 129 = /dev/isccctl1 Second Smart Capture Card control
+ ...
+
+ 93 block NAND Flash Translation Layer filesystem
+ 0 = /dev/nftla First NFTL layer
+ 16 = /dev/nftlb Second NFTL layer
+ ...
+ 240 = /dev/nftlp 16th NTFL layer
+
+ 94 char miroVIDEO DC10/30 capture/playback device {2.6}
+ 0 = /dev/dcxx0 First capture card
+ 1 = /dev/dcxx1 Second capture card
+ ...
+
+ 94 block IBM S/390 DASD block storage
+ 0 = /dev/dasda First DASD device, major
+ 1 = /dev/dasda1 First DASD device, block 1
+ 2 = /dev/dasda2 First DASD device, block 2
+ 3 = /dev/dasda3 First DASD device, block 3
+ 4 = /dev/dasdb Second DASD device, major
+ 5 = /dev/dasdb1 Second DASD device, block 1
+ 6 = /dev/dasdb2 Second DASD device, block 2
+ 7 = /dev/dasdb3 Second DASD device, block 3
+ ...
+
+ 95 char IP filter
+ 0 = /dev/ipl Filter control device/log file
+ 1 = /dev/ipnat NAT control device/log file
+ 2 = /dev/ipstate State information log file
+ 3 = /dev/ipauth Authentication control device/log file
+ ...
+
+ 96 char Parallel port ATAPI tape devices
+ 0 = /dev/pt0 First parallel port ATAPI tape
+ 1 = /dev/pt1 Second parallel port ATAPI tape
+ ...
+ 128 = /dev/npt0 First p.p. ATAPI tape, no rewind
+ 129 = /dev/npt1 Second p.p. ATAPI tape, no rewind
+ ...
+
+ 96 block Inverse NAND Flash Translation Layer
+ 0 = /dev/inftla First INFTL layer
+ 16 = /dev/inftlb Second INFTL layer
+ ...
+ 240 = /dev/inftlp 16th INTFL layer
+
+ 97 char Parallel port generic ATAPI interface
+ 0 = /dev/pg0 First parallel port ATAPI device
+ 1 = /dev/pg1 Second parallel port ATAPI device
+ 2 = /dev/pg2 Third parallel port ATAPI device
+ 3 = /dev/pg3 Fourth parallel port ATAPI device
+
+ These devices support the same API as the generic SCSI
+ devices.
+
+ 97 block Packet writing for CD/DVD devices
+ 0 = /dev/pktcdvd0 First packet-writing module
+ 1 = /dev/pktcdvd1 Second packet-writing module
+ ...
+
+ 98 char Control and Measurement Device (comedi)
+ 0 = /dev/comedi0 First comedi device
+ 1 = /dev/comedi1 Second comedi device
+ ...
+
+ See http://stm.lbl.gov/comedi or http://www.llp.fu-berlin.de/.
+
+ 98 block User-mode virtual block device
+ 0 = /dev/ubda First user-mode block device
+ 16 = /dev/udbb Second user-mode block device
+ ...
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+ This device is used by the user-mode virtual kernel port.
+
+ 99 char Raw parallel ports
+ 0 = /dev/parport0 First parallel port
+ 1 = /dev/parport1 Second parallel port
+ ...
+
+ 99 block JavaStation flash disk
+ 0 = /dev/jsfd JavaStation flash disk
+
+100 char Telephony for Linux
+ 0 = /dev/phone0 First telephony device
+ 1 = /dev/phone1 Second telephony device
+ ...
+
+101 char Motorola DSP 56xxx board
+ 0 = /dev/mdspstat Status information
+ 1 = /dev/mdsp1 First DSP board I/O controls
+ ...
+ 16 = /dev/mdsp16 16th DSP board I/O controls
+
+101 block AMI HyperDisk RAID controller
+ 0 = /dev/amiraid/ar0 First array whole disk
+ 16 = /dev/amiraid/ar1 Second array whole disk
+ ...
+ 240 = /dev/amiraid/ar15 16th array whole disk
+
+ For each device, partitions are added as:
+ 0 = /dev/amiraid/ar? Whole disk
+ 1 = /dev/amiraid/ar?p1 First partition
+ 2 = /dev/amiraid/ar?p2 Second partition
+ ...
+ 15 = /dev/amiraid/ar?p15 15th partition
+
+102 char Philips SAA5249 Teletext signal decoder {2.6}
+ 0 = /dev/tlk0 First Teletext decoder
+ 1 = /dev/tlk1 Second Teletext decoder
+ 2 = /dev/tlk2 Third Teletext decoder
+ 3 = /dev/tlk3 Fourth Teletext decoder
+
+102 block Compressed block device
+ 0 = /dev/cbd/a First compressed block device, whole device
+ 16 = /dev/cbd/b Second compressed block device, whole device
+ ...
+ 240 = /dev/cbd/p 16th compressed block device, whole device
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+103 char Arla network file system
+ 0 = /dev/nnpfs0 First NNPFS device
+ 1 = /dev/nnpfs1 Second NNPFS device
+
+ Arla is a free clone of the Andrew File System, AFS.
+ The NNPFS device gives user mode filesystem
+ implementations a kernel presence for caching and easy
+ mounting. For more information about the project,
+ write to <arla-drinkers@stacken.kth.se> or see
+ http://www.stacken.kth.se/project/arla/
+
+103 block Audit device
+ 0 = /dev/audit Audit device
+
+104 char Flash BIOS support
+
+104 block Compaq Next Generation Drive Array, first controller
+ 0 = /dev/cciss/c0d0 First logical drive, whole disk
+ 16 = /dev/cciss/c0d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c0d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+105 char Comtrol VS-1000 serial controller
+ 0 = /dev/ttyV0 First VS-1000 port
+ 1 = /dev/ttyV1 Second VS-1000 port
+ ...
+
+105 block Compaq Next Generation Drive Array, second controller
+ 0 = /dev/cciss/c1d0 First logical drive, whole disk
+ 16 = /dev/cciss/c1d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c1d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+106 char Comtrol VS-1000 serial controller - alternate devices
+ 0 = /dev/cuv0 First VS-1000 port
+ 1 = /dev/cuv1 Second VS-1000 port
+ ...
+
+106 block Compaq Next Generation Drive Array, third controller
+ 0 = /dev/cciss/c2d0 First logical drive, whole disk
+ 16 = /dev/cciss/c2d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c2d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+107 char 3Dfx Voodoo Graphics device
+ 0 = /dev/3dfx Primary 3Dfx graphics device
+
+107 block Compaq Next Generation Drive Array, fourth controller
+ 0 = /dev/cciss/c3d0 First logical drive, whole disk
+ 16 = /dev/cciss/c3d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c3d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+108 char Device independent PPP interface
+ 0 = /dev/ppp Device independent PPP interface
+
+108 block Compaq Next Generation Drive Array, fifth controller
+ 0 = /dev/cciss/c4d0 First logical drive, whole disk
+ 16 = /dev/cciss/c4d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c4d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+109 char Reserved for logical volume manager
+
+109 block Compaq Next Generation Drive Array, sixth controller
+ 0 = /dev/cciss/c5d0 First logical drive, whole disk
+ 16 = /dev/cciss/c5d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c5d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+110 char miroMEDIA Surround board
+ 0 = /dev/srnd0 First miroMEDIA Surround board
+ 1 = /dev/srnd1 Second miroMEDIA Surround board
+ ...
+
+110 block Compaq Next Generation Drive Array, seventh controller
+ 0 = /dev/cciss/c6d0 First logical drive, whole disk
+ 16 = /dev/cciss/c6d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c6d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+111 char Philips SAA7146-based audio/video card {2.6}
+ 0 = /dev/av0 First A/V card
+ 1 = /dev/av1 Second A/V card
+ ...
+
+111 block Compaq Next Generation Drive Array, eigth controller
+ 0 = /dev/cciss/c7d0 First logical drive, whole disk
+ 16 = /dev/cciss/c7d1 Second logical drive, whole disk
+ ...
+ 240 = /dev/cciss/c7d15 16th logical drive, whole disk
+
+ Partitions are handled the same way as for Mylex
+ DAC960 (see major number 48) except that the limit on
+ partitions is 15.
+
+112 char ISI serial card
+ 0 = /dev/ttyM0 First ISI port
+ 1 = /dev/ttyM1 Second ISI port
+ ...
+
+ There is currently a device-naming conflict between
+ these and PAM multimodems (major 78).
+
+112 block IBM iSeries virtual disk
+ 0 = /dev/iseries/vda First virtual disk, whole disk
+ 8 = /dev/iseries/vdb Second virtual disk, whole disk
+ ...
+ 200 = /dev/iseries/vdz 26th virtual disk, whole disk
+ 208 = /dev/iseries/vdaa 27th virtual disk, whole disk
+ ...
+ 248 = /dev/iseries/vdaf 32nd virtual disk, whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 7.
+
+113 char ISI serial card - alternate devices
+ 0 = /dev/cum0 Callout device for ttyM0
+ 1 = /dev/cum1 Callout device for ttyM1
+ ...
+
+113 block IBM iSeries virtual CD-ROM
+
+ 0 = /dev/iseries/vcda First virtual CD-ROM
+ 1 = /dev/iseries/vcdb Second virtual CD-ROM
+ ...
+
+114 char Picture Elements ISE board
+ 0 = /dev/ise0 First ISE board
+ 1 = /dev/ise1 Second ISE board
+ ...
+ 128 = /dev/isex0 Control node for first ISE board
+ 129 = /dev/isex1 Control node for second ISE board
+ ...
+
+ The ISE board is an embedded computer, optimized for
+ image processing. The /dev/iseN nodes are the general
+ I/O access to the board, the /dev/isex0 nodes command
+ nodes used to control the board.
+
+114 block IDE BIOS powered software RAID interfaces such as the
+ Promise Fastrak
+
+ 0 = /dev/ataraid/d0
+ 1 = /dev/ataraid/d0p1
+ 2 = /dev/ataraid/d0p2
+ ...
+ 16 = /dev/ataraid/d1
+ 17 = /dev/ataraid/d1p1
+ 18 = /dev/ataraid/d1p2
+ ...
+ 255 = /dev/ataraid/d15p15
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+115 char TI link cable devices (115 was formerly the console driver speaker)
+ 0 = /dev/tipar0 Parallel cable on first parallel port
+ ...
+ 7 = /dev/tipar7 Parallel cable on seventh parallel port
+
+ 8 = /dev/tiser0 Serial cable on first serial port
+ ...
+ 15 = /dev/tiser7 Serial cable on seventh serial port
+
+ 16 = /dev/tiusb0 First USB cable
+ ...
+ 47 = /dev/tiusb31 32nd USB cable
+
+115 block NetWare (NWFS) Devices (0-255)
+
+ The NWFS (NetWare) devices are used to present a
+ collection of NetWare Mirror Groups or NetWare
+ Partitions as a logical storage segment for
+ use in mounting NetWare volumes. A maximum of
+ 256 NetWare volumes can be supported in a single
+ machine.
+
+ http://www.kernel.org/pub/linux/kernel/people/jmerkey/nwfs
+
+ 0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
+ 1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
+ 2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
+ ...
+ 255 = /dev/nwfs/v255 Last NetWare (NWFS) Logical Volume
+
+116 char Advanced Linux Sound Driver (ALSA)
+
+116 block MicroMemory battery backed RAM adapter (NVRAM)
+ Supports 16 boards, 15 paritions each.
+ Requested by neilb at cse.unsw.edu.au.
+
+ 0 = /dev/umem/d0 Whole of first board
+ 1 = /dev/umem/d0p1 First partition of first board
+ 2 = /dev/umem/d0p2 Second partition of first board
+ 15 = /dev/umem/d0p15 15th partition of first board
+
+ 16 = /dev/umem/d1 Whole of second board
+ 17 = /dev/umem/d1p1 First partition of second board
+ ...
+ 255= /dev/umem/d15p15 15th partition of 16th board.
+
+117 char COSA/SRP synchronous serial card
+ 0 = /dev/cosa0c0 1st board, 1st channel
+ 1 = /dev/cosa0c1 1st board, 2nd channel
+ ...
+ 16 = /dev/cosa1c0 2nd board, 1st channel
+ 17 = /dev/cosa1c1 2nd board, 2nd channel
+ ...
+
+117 block Enterprise Volume Management System (EVMS)
+
+ The EVMS driver uses a layered, plug-in model to provide
+ unparalleled flexibility and extensibility in managing
+ storage. This allows for easy expansion or customization
+ of various levels of volume management. Requested by
+ Mark Peloquin (peloquin at us.ibm.com).
+
+ Note: EVMS populates and manages all the devnodes in
+ /dev/evms.
+
+ http://sf.net/projects/evms
+
+ 0 = /dev/evms/block_device EVMS block device
+ 1 = /dev/evms/legacyname1 First EVMS legacy device
+ 2 = /dev/evms/legacyname2 Second EVMS legacy device
+ ...
+ Both ranges can grow (down or up) until they meet.
+ ...
+ 254 = /dev/evms/EVMSname2 Second EVMS native device
+ 255 = /dev/evms/EVMSname1 First EVMS native device
+
+ Note: legacyname(s) are derived from the normal legacy
+ device names. For example, /dev/hda5 would become
+ /dev/evms/hda5.
+
+118 char IBM Cryptographic Accelerator
+ 0 = /dev/ica Virtual interface to all IBM Crypto Accelerators
+ 1 = /dev/ica0 IBMCA Device 0
+ 2 = /dev/ica1 IBMCA Device 1
+ ...
+
+119 char VMware virtual network control
+ 0 = /dev/vnet0 1st virtual network
+ 1 = /dev/vnet1 2nd virtual network
+ ...
+
+120-127 char LOCAL/EXPERIMENTAL USE
+120-127 block LOCAL/EXPERIMENTAL USE
+ Allocated for local/experimental use. For devices not
+ assigned official numbers, these ranges should be
+ used in order to avoid conflicting with future assignments.
+
+128-135 char Unix98 PTY masters
+
+ These devices should not have corresponding device
+ nodes; instead they should be accessed through the
+ /dev/ptmx cloning interface.
+
+
+128 block SCSI disk devices (128-143)
+ 0 = /dev/sddy 129th SCSI disk whole disk
+ 16 = /dev/sddz 130th SCSI disk whole disk
+ 32 = /dev/sdea 131th SCSI disk whole disk
+ ...
+ 240 = /dev/sden 144th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+
+129 block SCSI disk devices (144-159)
+ 0 = /dev/sdeo 145th SCSI disk whole disk
+ 16 = /dev/sdep 146th SCSI disk whole disk
+ 32 = /dev/sdeq 147th SCSI disk whole disk
+ ...
+ 240 = /dev/sdfd 160th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+130 char (Misc devices)
+
+130 block SCSI disk devices (160-175)
+ 0 = /dev/sdfe 161st SCSI disk whole disk
+ 16 = /dev/sdff 162nd SCSI disk whole disk
+ 32 = /dev/sdfg 163rd SCSI disk whole disk
+ ...
+ 240 = /dev/sdft 176th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+131 block SCSI disk devices (176-191)
+ 0 = /dev/sdfu 177th SCSI disk whole disk
+ 16 = /dev/sdfv 178th SCSI disk whole disk
+ 32 = /dev/sdfw 179th SCSI disk whole disk
+ ...
+ 240 = /dev/sdgj 192nd SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+
+132 block SCSI disk devices (192-207)
+ 0 = /dev/sdgk 193rd SCSI disk whole disk
+ 16 = /dev/sdgl 194th SCSI disk whole disk
+ 32 = /dev/sdgm 195th SCSI disk whole disk
+ ...
+ 240 = /dev/sdgz 208th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+
+133 block SCSI disk devices (208-223)
+ 0 = /dev/sdha 209th SCSI disk whole disk
+ 16 = /dev/sdhb 210th SCSI disk whole disk
+ 32 = /dev/sdhc 211th SCSI disk whole disk
+ ...
+ 240 = /dev/sdhp 224th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+
+134 block SCSI disk devices (224-239)
+ 0 = /dev/sdhq 225th SCSI disk whole disk
+ 16 = /dev/sdhr 226th SCSI disk whole disk
+ 32 = /dev/sdhs 227th SCSI disk whole disk
+ ...
+ 240 = /dev/sdif 240th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+
+135 block SCSI disk devices (240-255)
+ 0 = /dev/sdig 241st SCSI disk whole disk
+ 16 = /dev/sdih 242nd SCSI disk whole disk
+ 32 = /dev/sdih 243rd SCSI disk whole disk
+ ...
+ 240 = /dev/sdiv 256th SCSI disk whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+
+136-143 char Unix98 PTY slaves
+ 0 = /dev/pts/0 First Unix98 pseudo-TTY
+ 1 = /dev/pts/1 Second Unix98 pesudo-TTY
+ ...
+
+ These device nodes are automatically generated with
+ the proper permissions and modes by mounting the
+ devpts filesystem onto /dev/pts with the appropriate
+ mount options (distribution dependent, however, on
+ *most* distributions the appropriate options are
+ "mode=0620,gid=<gid of the "tty" group>".)
+
+136 block Mylex DAC960 PCI RAID controller; ninth controller
+ 0 = /dev/rd/c8d0 First disk, whole disk
+ 8 = /dev/rd/c8d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c8d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+137 block Mylex DAC960 PCI RAID controller; tenth controller
+ 0 = /dev/rd/c9d0 First disk, whole disk
+ 8 = /dev/rd/c9d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c9d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+138 block Mylex DAC960 PCI RAID controller; eleventh controller
+ 0 = /dev/rd/c10d0 First disk, whole disk
+ 8 = /dev/rd/c10d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c10d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+139 block Mylex DAC960 PCI RAID controller; twelfth controller
+ 0 = /dev/rd/c11d0 First disk, whole disk
+ 8 = /dev/rd/c11d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c11d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+140 block Mylex DAC960 PCI RAID controller; thirteenth controller
+ 0 = /dev/rd/c12d0 First disk, whole disk
+ 8 = /dev/rd/c12d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c12d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+141 block Mylex DAC960 PCI RAID controller; fourteenth controller
+ 0 = /dev/rd/c13d0 First disk, whole disk
+ 8 = /dev/rd/c13d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c13d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+142 block Mylex DAC960 PCI RAID controller; fifteenth controller
+ 0 = /dev/rd/c14d0 First disk, whole disk
+ 8 = /dev/rd/c14d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c14d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+143 block Mylex DAC960 PCI RAID controller; sixteenth controller
+ 0 = /dev/rd/c15d0 First disk, whole disk
+ 8 = /dev/rd/c15d1 Second disk, whole disk
+ ...
+ 248 = /dev/rd/c15d31 32nd disk, whole disk
+
+ Partitions are handled as for major 48.
+
+144 char Encapsulated PPP
+ 0 = /dev/pppox0 First PPP over Ethernet
+ ...
+ 63 = /dev/pppox63 64th PPP over Ethernet
+
+ This is primarily used for ADSL.
+
+ The SST 5136-DN DeviceNet interface driver has been
+ relocated to major 183 due to an unfortunate conflict.
+
+144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
+ 0 = mounted device 256
+ 255 = mounted device 511
+
+145 char SAM9407-based soundcard
+ 0 = /dev/sam0_mixer
+ 1 = /dev/sam0_sequencer
+ 2 = /dev/sam0_midi00
+ 3 = /dev/sam0_dsp
+ 4 = /dev/sam0_audio
+ 6 = /dev/sam0_sndstat
+ 18 = /dev/sam0_midi01
+ 34 = /dev/sam0_midi02
+ 50 = /dev/sam0_midi03
+ 64 = /dev/sam1_mixer
+ ...
+ 128 = /dev/sam2_mixer
+ ...
+ 192 = /dev/sam3_mixer
+ ...
+
+ Device functions match OSS, but offer a number of
+ addons, which are sam9407 specific. OSS can be
+ operated simultaneously, taking care of the codec.
+
+145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
+ 0 = mounted device 512
+ 255 = mounted device 767
+
+146 char SYSTRAM SCRAMNet mirrored-memory network
+ 0 = /dev/scramnet0 First SCRAMNet device
+ 1 = /dev/scramnet1 Second SCRAMNet device
+ ...
+
+146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
+ 0 = mounted device 768
+ 255 = mounted device 1023
+
+147 char Aureal Semiconductor Vortex Audio device
+ 0 = /dev/aureal0 First Aureal Vortex
+ 1 = /dev/aureal1 Second Aureal Vortex
+ ...
+
+147 block Distributed Replicated Block Device (DRBD)
+ 0 = /dev/drbd0 First DRBD device
+ 1 = /dev/drbd1 Second DRBD device
+ ...
+
+148 char Technology Concepts serial card
+ 0 = /dev/ttyT0 First TCL port
+ 1 = /dev/ttyT1 Second TCL port
+ ...
+
+149 char Technology Concepts serial card - alternate devices
+ 0 = /dev/cut0 Callout device for ttyT0
+ 1 = /dev/cut0 Callout device for ttyT1
+ ...
+
+150 char Real-Time Linux FIFOs
+ 0 = /dev/rtf0 First RTLinux FIFO
+ 1 = /dev/rtf1 Second RTLinux FIFO
+ ...
+
+151 char DPT I2O SmartRaid V controller
+ 0 = /dev/dpti0 First DPT I2O adapter
+ 1 = /dev/dpti1 Second DPT I2O adapter
+ ...
+
+152 char EtherDrive Control Device
+ 0 = /dev/etherd/ctl Connect/Disconnect an EtherDrive
+ 1 = /dev/etherd/err Monitor errors
+ 2 = /dev/etherd/raw Raw AoE packet monitor
+
+152 block EtherDrive Block Devices
+ 0 = /dev/etherd/0 EtherDrive 0
+ ...
+ 255 = /dev/etherd/255 EtherDrive 255
+
+153 char SPI Bus Interface (sometimes referred to as MicroWire)
+ 0 = /dev/spi0 First SPI device on the bus
+ 1 = /dev/spi1 Second SPI device on the bus
+ ...
+ 15 = /dev/spi15 Sixteenth SPI device on the bus
+
+153 block Enhanced Metadisk RAID (EMD) storage units
+ 0 = /dev/emd/0 First unit
+ 1 = /dev/emd/0p1 Partition 1 on First unit
+ 2 = /dev/emd/0p2 Partition 2 on First unit
+ ...
+ 15 = /dev/emd/0p15 Partition 15 on First unit
+
+ 16 = /dev/emd/1 Second unit
+ 32 = /dev/emd/2 Third unit
+ ...
+ 240 = /dev/emd/15 Sixteenth unit
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
+154 char Specialix RIO serial card
+ 0 = /dev/ttySR0 First RIO port
+ ...
+ 255 = /dev/ttySR255 256th RIO port
+
+155 char Specialix RIO serial card - alternate devices
+ 0 = /dev/cusr0 Callout device for ttySR0
+ ...
+ 255 = /dev/cusr255 Callout device for ttySR255
+
+156 char Specialix RIO serial card
+ 0 = /dev/ttySR256 257th RIO port
+ ...
+ 255 = /dev/ttySR511 512th RIO port
+
+157 char Specialix RIO serial card - alternate devices
+ 0 = /dev/cusr256 Callout device for ttySR256
+ ...
+ 255 = /dev/cusr511 Callout device for ttySR511
+
+158 char Dialogic GammaLink fax driver
+ 0 = /dev/gfax0 GammaLink channel 0
+ 1 = /dev/gfax1 GammaLink channel 1
+ ...
+
+159 char RESERVED
+159 block RESERVED
+
+160 char General Purpose Instrument Bus (GPIB)
+ 0 = /dev/gpib0 First GPIB bus
+ 1 = /dev/gpib1 Second GPIB bus
+ ...
+
+160 block Carmel 8-port SATA Disks on First Controller
+ 0 = /dev/carmel/0 SATA disk 0 whole disk
+ 1 = /dev/carmel/0p1 SATA disk 0 partition 1
+ ...
+ 31 = /dev/carmel/0p31 SATA disk 0 partition 31
+
+ 32 = /dev/carmel/1 SATA disk 1 whole disk
+ 64 = /dev/carmel/2 SATA disk 2 whole disk
+ ...
+ 224 = /dev/carmel/7 SATA disk 7 whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 31.
+
+161 char IrCOMM devices (IrDA serial/parallel emulation)
+ 0 = /dev/ircomm0 First IrCOMM device
+ 1 = /dev/ircomm1 Second IrCOMM device
+ ...
+ 16 = /dev/irlpt0 First IrLPT device
+ 17 = /dev/irlpt1 Second IrLPT device
+ ...
+
+161 block Carmel 8-port SATA Disks on Second Controller
+ 0 = /dev/carmel/8 SATA disk 8 whole disk
+ 1 = /dev/carmel/8p1 SATA disk 8 partition 1
+ ...
+ 31 = /dev/carmel/8p31 SATA disk 8 partition 31
+
+ 32 = /dev/carmel/9 SATA disk 9 whole disk
+ 64 = /dev/carmel/10 SATA disk 10 whole disk
+ ...
+ 224 = /dev/carmel/15 SATA disk 15 whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 31.
+
+162 char Raw block device interface
+ 0 = /dev/rawctl Raw I/O control device
+ 1 = /dev/raw/raw1 First raw I/O device
+ 2 = /dev/raw/raw2 Second raw I/O device
+ ...
+
+163 char UNASSIGNED (was Radio Tech BIM-XXX-RS232 radio modem - see 51)
+
+164 char Chase Research AT/PCI-Fast serial card
+ 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
+ ...
+ 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
+ 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
+ ...
+ 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
+ 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
+ ...
+ 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
+ 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
+ ...
+ 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
+
+165 char Chase Research AT/PCI-Fast serial card - alternate devices
+ 0 = /dev/cuch0 Callout device for ttyCH0
+ ...
+ 63 = /dev/cuch63 Callout device for ttyCH63
+
+166 char ACM USB modems
+ 0 = /dev/ttyACM0 First ACM modem
+ 1 = /dev/ttyACM1 Second ACM modem
+ ...
+
+167 char ACM USB modems - alternate devices
+ 0 = /dev/cuacm0 Callout device for ttyACM0
+ 1 = /dev/cuacm1 Callout device for ttyACM1
+ ...
+
+168 char Eracom CSA7000 PCI encryption adaptor
+ 0 = /dev/ecsa0 First CSA7000
+ 1 = /dev/ecsa1 Second CSA7000
+ ...
+
+169 char Eracom CSA8000 PCI encryption adaptor
+ 0 = /dev/ecsa8-0 First CSA8000
+ 1 = /dev/ecsa8-1 Second CSA8000
+ ...
+
+170 char AMI MegaRAC remote access controller
+ 0 = /dev/megarac0 First MegaRAC card
+ 1 = /dev/megarac1 Second MegaRAC card
+ ...
+
+171 char Reserved for IEEE 1394 (Firewire)
+
+
+172 char Moxa Intellio serial card
+ 0 = /dev/ttyMX0 First Moxa port
+ 1 = /dev/ttyMX1 Second Moxa port
+ ...
+ 127 = /dev/ttyMX127 128th Moxa port
+ 128 = /dev/moxactl Moxa control port
+
+173 char Moxa Intellio serial card - alternate devices
+ 0 = /dev/cumx0 Callout device for ttyMX0
+ 1 = /dev/cumx1 Callout device for ttyMX1
+ ...
+ 127 = /dev/cumx127 Callout device for ttyMX127
+
+174 char SmartIO serial card
+ 0 = /dev/ttySI0 First SmartIO port
+ 1 = /dev/ttySI1 Second SmartIO port
+ ...
+
+175 char SmartIO serial card - alternate devices
+ 0 = /dev/cusi0 Callout device for ttySI0
+ 1 = /dev/cusi1 Callout device for ttySI1
+ ...
+
+176 char nCipher nFast PCI crypto accelerator
+ 0 = /dev/nfastpci0 First nFast PCI device
+ 1 = /dev/nfastpci1 First nFast PCI device
+ ...
+
+177 char TI PCILynx memory spaces
+ 0 = /dev/pcilynx/aux0 AUX space of first PCILynx card
+ ...
+ 15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
+ 16 = /dev/pcilynx/rom0 ROM space of first PCILynx card
+ ...
+ 31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
+ 32 = /dev/pcilynx/ram0 RAM space of first PCILynx card
+ ...
+ 47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
+
+178 char Giganet cLAN1xxx virtual interface adapter
+ 0 = /dev/clanvi0 First cLAN adapter
+ 1 = /dev/clanvi1 Second cLAN adapter
+ ...
+
+179 char CCube DVXChip-based PCI products
+ 0 = /dev/dvxirq0 First DVX device
+ 1 = /dev/dvxirq1 Second DVX device
+ ...
+
+180 char USB devices
+ 0 = /dev/usb/lp0 First USB printer
+ ...
+ 15 = /dev/usb/lp15 16th USB printer
+ 16 = /dev/usb/mouse0 First USB mouse
+ ...
+ 31 = /dev/usb/mouse15 16th USB mouse
+ 32 = /dev/usb/ez0 First USB firmware loader
+ ...
+ 47 = /dev/usb/ez15 16th USB firmware loader
+ 48 = /dev/usb/scanner0 First USB scanner
+ ...
+ 63 = /dev/usb/scanner15 16th USB scanner
+ 64 = /dev/usb/rio500 Diamond Rio 500
+ 65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
+ 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
+
+180 block USB block devices
+ 0 = /dev/uba First USB block device
+ 8 = /dev/ubb Second USB block device
+ 16 = /dev/ubc Thrid USB block device
+ ...
+
+181 char Conrad Electronic parallel port radio clocks
+ 0 = /dev/pcfclock0 First Conrad radio clock
+ 1 = /dev/pcfclock1 Second Conrad radio clock
+ ...
+
+182 char Picture Elements THR2 binarizer
+ 0 = /dev/pethr0 First THR2 board
+ 1 = /dev/pethr1 Second THR2 board
+ ...
+
+183 char SST 5136-DN DeviceNet interface
+ 0 = /dev/ss5136dn0 First DeviceNet interface
+ 1 = /dev/ss5136dn1 Second DeviceNet interface
+ ...
+
+ This device used to be assigned to major number 144.
+ It had to be moved due to an unfortunate conflict.
+
+184 char Picture Elements' video simulator/sender
+ 0 = /dev/pevss0 First sender board
+ 1 = /dev/pevss1 Second sender board
+ ...
+
+185 char InterMezzo high availability file system
+ 0 = /dev/intermezzo0 First cache manager
+ 1 = /dev/intermezzo1 Second cache manager
+ ...
+
+ See http://www.inter-mezzo.org/ for more information.
+
+186 char Object-based storage control device
+ 0 = /dev/obd0 First obd control device
+ 1 = /dev/obd1 Second obd control device
+ ...
+
+ See ftp://ftp.lustre.org/pub/obd for code and information.
+
+187 char DESkey hardware encryption device
+ 0 = /dev/deskey0 First DES key
+ 1 = /dev/deskey1 Second DES key
+ ...
+
+188 char USB serial converters
+ 0 = /dev/ttyUSB0 First USB serial converter
+ 1 = /dev/ttyUSB1 Second USB serial converter
+ ...
+
+189 char USB serial converters - alternate devices
+ 0 = /dev/cuusb0 Callout device for ttyUSB0
+ 1 = /dev/cuusb1 Callout device for ttyUSB1
+ ...
+
+190 char Kansas City tracker/tuner card
+ 0 = /dev/kctt0 First KCT/T card
+ 1 = /dev/kctt1 Second KCT/T card
+ ...
+
+191 char Reserved for PCMCIA
+
+192 char Kernel profiling interface
+ 0 = /dev/profile Profiling control device
+ 1 = /dev/profile0 Profiling device for CPU 0
+ 2 = /dev/profile1 Profiling device for CPU 1
+ ...
+
+193 char Kernel event-tracing interface
+ 0 = /dev/trace Tracing control device
+ 1 = /dev/trace0 Tracing device for CPU 0
+ 2 = /dev/trace1 Tracing device for CPU 1
+ ...
+
+194 char linVideoStreams (LINVS)
+ 0 = /dev/mvideo/status0 Video compression status
+ 1 = /dev/mvideo/stream0 Video stream
+ 2 = /dev/mvideo/frame0 Single compressed frame
+ 3 = /dev/mvideo/rawframe0 Raw uncompressed frame
+ 4 = /dev/mvideo/codec0 Direct codec access
+ 5 = /dev/mvideo/video4linux0 Video4Linux compatibility
+
+ 16 = /dev/mvideo/status1 Second device
+ ...
+ 32 = /dev/mvideo/status2 Third device
+ ...
+ ...
+ 240 = /dev/mvideo/status15 16th device
+ ...
+
+195 char Nvidia graphics devices
+ 0 = /dev/nvidia0 First Nvidia card
+ 1 = /dev/nvidia1 Second Nvidia card
+ ...
+ 255 = /dev/nvidiactl Nvidia card control device
+
+196 char Tormenta T1 card
+ 0 = /dev/tor/0 Master control channel for all cards
+ 1 = /dev/tor/1 First DS0
+ 2 = /dev/tor/2 Second DS0
+ ...
+ 48 = /dev/tor/48 48th DS0
+ 49 = /dev/tor/49 First pseudo-channel
+ 50 = /dev/tor/50 Second pseudo-channel
+ ...
+
+197 char OpenTNF tracing facility
+ 0 = /dev/tnf/t0 Trace 0 data extraction
+ 1 = /dev/tnf/t1 Trace 1 data extraction
+ ...
+ 128 = /dev/tnf/status Tracing facility status
+ 130 = /dev/tnf/trace Tracing device
+
+198 char Total Impact TPMP2 quad coprocessor PCI card
+ 0 = /dev/tpmp2/0 First card
+ 1 = /dev/tpmp2/1 Second card
+ ...
+
+199 char Veritas volume manager (VxVM) volumes
+ 0 = /dev/vx/rdsk/*/* First volume
+ 1 = /dev/vx/rdsk/*/* Second volume
+ ...
+
+199 block Veritas volume manager (VxVM) volumes
+ 0 = /dev/vx/dsk/*/* First volume
+ 1 = /dev/vx/dsk/*/* Second volume
+ ...
+
+ The namespace in these directories is maintained by
+ the user space VxVM software.
+
+200 char Veritas VxVM configuration interface
+ 0 = /dev/vx/config Configuration access node
+ 1 = /dev/vx/trace Volume i/o trace access node
+ 2 = /dev/vx/iod Volume i/o daemon access node
+ 3 = /dev/vx/info Volume information access node
+ 4 = /dev/vx/task Volume tasks access node
+ 5 = /dev/vx/taskmon Volume tasks monitor daemon
+
+201 char Veritas VxVM dynamic multipathing driver
+ 0 = /dev/vx/rdmp/* First multipath device
+ 1 = /dev/vx/rdmp/* Second multipath device
+ ...
+201 block Veritas VxVM dynamic multipathing driver
+ 0 = /dev/vx/dmp/* First multipath device
+ 1 = /dev/vx/dmp/* Second multipath device
+ ...
+
+ The namespace in these directories is maintained by
+ the user space VxVM software.
+
+202 char CPU model-specific registers
+ 0 = /dev/cpu/0/msr MSRs on CPU 0
+ 1 = /dev/cpu/1/msr MSRs on CPU 1
+ ...
+
+203 char CPU CPUID information
+ 0 = /dev/cpu/0/cpuid CPUID on CPU 0
+ 1 = /dev/cpu/1/cpuid CPUID on CPU 1
+ ...
+
+204 char Low-density serial ports
+ 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
+ 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
+ 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
+ 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
+ 4 = /dev/ttyFB0 Intel Footbridge (ARM)
+ 5 = /dev/ttySA0 StrongARM builtin serial port 0
+ 6 = /dev/ttySA1 StrongARM builtin serial port 1
+ 7 = /dev/ttySA2 StrongARM builtin serial port 2
+ 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
+ 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
+ 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
+ 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
+ 12 = /dev/ttyFW0 Firmware console - port 0
+ 13 = /dev/ttyFW1 Firmware console - port 1
+ 14 = /dev/ttyFW2 Firmware console - port 2
+ 15 = /dev/ttyFW3 Firmware console - port 3
+ 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
+ ...
+ 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
+ 32 = /dev/ttyDB0 DataBooster serial port 0
+ ...
+ 39 = /dev/ttyDB7 DataBooster serial port 7
+ 40 = /dev/ttySG0 SGI Altix console port
+ 41 = /dev/ttySMX0 Motorola i.MX - port 0
+ 42 = /dev/ttySMX1 Motorola i.MX - port 1
+ 43 = /dev/ttySMX2 Motorola i.MX - port 2
+ 44 = /dev/ttyMM0 Marvell MPSC - port 0
+ 45 = /dev/ttyMM1 Marvell MPSC - port 1
+ 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
+ ...
+ 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
+ 50 = /dev/ttyIOC40 Altix serial card
+ ...
+ 81 = /dev/ttyIOC431 Altix serial card
+ 82 = /dev/ttyVR0 NEC VR4100 series SIU
+ 83 = /dev/ttyVR1 NEC VR4100 series DSIU
+
+205 char Low-density serial ports (alternate device)
+ 0 = /dev/culu0 Callout device for ttyLU0
+ 1 = /dev/culu1 Callout device for ttyLU1
+ 2 = /dev/culu2 Callout device for ttyLU2
+ 3 = /dev/culu3 Callout device for ttyLU3
+ 4 = /dev/cufb0 Callout device for ttyFB0
+ 5 = /dev/cusa0 Callout device for ttySA0
+ 6 = /dev/cusa1 Callout device for ttySA1
+ 7 = /dev/cusa2 Callout device for ttySA2
+ 8 = /dev/cusc0 Callout device for ttySC0
+ 9 = /dev/cusc1 Callout device for ttySC1
+ 10 = /dev/cusc2 Callout device for ttySC2
+ 11 = /dev/cusc3 Callout device for ttySC3
+ 12 = /dev/cufw0 Callout device for ttyFW0
+ 13 = /dev/cufw1 Callout device for ttyFW1
+ 14 = /dev/cufw2 Callout device for ttyFW2
+ 15 = /dev/cufw3 Callout device for ttyFW3
+ 16 = /dev/cuam0 Callout device for ttyAM0
+ ...
+ 31 = /dev/cuam15 Callout device for ttyAM15
+ 32 = /dev/cudb0 Callout device for ttyDB0
+ ...
+ 39 = /dev/cudb7 Callout device for ttyDB7
+ 40 = /dev/cusg0 Callout device for ttySG0
+ 41 = /dev/ttycusmx0 Callout device for ttySMX0
+ 42 = /dev/ttycusmx1 Callout device for ttySMX1
+ 43 = /dev/ttycusmx2 Callout device for ttySMX2
+ 46 = /dev/cucpm0 Callout device for ttyCPM0
+ ...
+ 49 = /dev/cucpm5 Callout device for ttyCPM5
+ 50 = /dev/cuioc40 Callout device for ttyIOC40
+ ...
+ 81 = /dev/cuioc431 Callout device for ttyIOC431
+ 82 = /dev/cuvr0 Callout device for ttyVR0
+ 83 = /dev/cuvr1 Callout device for ttyVR1
+
+
+206 char OnStream SC-x0 tape devices
+ 0 = /dev/osst0 First OnStream SCSI tape, mode 0
+ 1 = /dev/osst1 Second OnStream SCSI tape, mode 0
+ ...
+ 32 = /dev/osst0l First OnStream SCSI tape, mode 1
+ 33 = /dev/osst1l Second OnStream SCSI tape, mode 1
+ ...
+ 64 = /dev/osst0m First OnStream SCSI tape, mode 2
+ 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
+ ...
+ 96 = /dev/osst0a First OnStream SCSI tape, mode 3
+ 97 = /dev/osst1a Second OnStream SCSI tape, mode 3
+ ...
+ 128 = /dev/nosst0 No rewind version of /dev/osst0
+ 129 = /dev/nosst1 No rewind version of /dev/osst1
+ ...
+ 160 = /dev/nosst0l No rewind version of /dev/osst0l
+ 161 = /dev/nosst1l No rewind version of /dev/osst1l
+ ...
+ 192 = /dev/nosst0m No rewind version of /dev/osst0m
+ 193 = /dev/nosst1m No rewind version of /dev/osst1m
+ ...
+ 224 = /dev/nosst0a No rewind version of /dev/osst0a
+ 225 = /dev/nosst1a No rewind version of /dev/osst1a
+ ...
+
+ The OnStream SC-x0 SCSI tapes do not support the
+ standard SCSI SASD command set and therefore need
+ their own driver "osst". Note that the IDE, USB (and
+ maybe ParPort) versions may be driven via ide-scsi or
+ usb-storage SCSI emulation and this osst device and
+ driver as well. The ADR-x0 drives are QIC-157
+ compliant and don't need osst.
+
+207 char Compaq ProLiant health feature indicate
+ 0 = /dev/cpqhealth/cpqw Redirector interface
+ 1 = /dev/cpqhealth/crom EISA CROM
+ 2 = /dev/cpqhealth/cdt Data Table
+ 3 = /dev/cpqhealth/cevt Event Log
+ 4 = /dev/cpqhealth/casr Automatic Server Recovery
+ 5 = /dev/cpqhealth/cecc ECC Memory
+ 6 = /dev/cpqhealth/cmca Machine Check Architecture
+ 7 = /dev/cpqhealth/ccsm Deprecated CDT
+ 8 = /dev/cpqhealth/cnmi NMI Handling
+ 9 = /dev/cpqhealth/css Sideshow Management
+ 10 = /dev/cpqhealth/cram CMOS interface
+ 11 = /dev/cpqhealth/cpci PCI IRQ interface
+
+208 char User space serial ports
+ 0 = /dev/ttyU0 First user space serial port
+ 1 = /dev/ttyU1 Second user space serial port
+ ...
+
+209 char User space serial ports (alternate devices)
+ 0 = /dev/cuu0 Callout device for ttyU0
+ 1 = /dev/cuu1 Callout device for ttyU1
+ ...
+
+210 char SBE, Inc. sync/async serial card
+ 0 = /dev/sbei/wxcfg0 Configuration device for board 0
+ 1 = /dev/sbei/dld0 Download device for board 0
+ 2 = /dev/sbei/wan00 WAN device, port 0, board 0
+ 3 = /dev/sbei/wan01 WAN device, port 1, board 0
+ 4 = /dev/sbei/wan02 WAN device, port 2, board 0
+ 5 = /dev/sbei/wan03 WAN device, port 3, board 0
+ 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
+ 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
+ 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
+ 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
+ 10 = /dev/sbei/wxcfg1 Configuration device for board 1
+ 11 = /dev/sbei/dld1 Download device for board 1
+ 12 = /dev/sbei/wan10 WAN device, port 0, board 1
+ 13 = /dev/sbei/wan11 WAN device, port 1, board 1
+ 14 = /dev/sbei/wan12 WAN device, port 2, board 1
+ 15 = /dev/sbei/wan13 WAN device, port 3, board 1
+ 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
+ 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
+ 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
+ 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
+ ...
+
+ Yes, each board is really spaced 10 (decimal) apart.
+
+211 char Addinum CPCI1500 digital I/O card
+ 0 = /dev/addinum/cpci1500/0 First CPCI1500 card
+ 1 = /dev/addinum/cpci1500/1 Second CPCI1500 card
+ ...
+
+212 char LinuxTV.org DVB driver subsystem
+
+ 0 = /dev/dvb/adapter0/video0 first video decoder of first card
+ 1 = /dev/dvb/adapter0/audio0 first audio decoder of first card
+ 2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
+ 3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
+ 4 = /dev/dvb/adapter0/demux0 first demux device of first card
+ 5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
+ 6 = /dev/dvb/adapter0/ca0 first common access port of first card
+ 7 = /dev/dvb/adapter0/net0 first network device of first card
+ 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
+ 9 = /dev/dvb/adapter0/video1 second video decoder of first card
+ ...
+ 64 = /dev/dvb/adapter1/video0 first video decoder of second card
+ ...
+ 128 = /dev/dvb/adapter2/video0 first video decoder of third card
+ ...
+ 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
+
+
+216 char USB BlueTooth devices
+ 0 = /dev/ttyUB0 First USB BlueTooth device
+ 1 = /dev/ttyUB1 Second USB BlueTooth device
+ ...
+
+217 char USB BlueTooth devices (alternate devices)
+ 0 = /dev/cuub0 Callout device for ttyUB0
+ 1 = /dev/cuub1 Callout device for ttyUB1
+ ...
+
+218 char The Logical Company bus Unibus/Qbus adapters
+ 0 = /dev/logicalco/bci/0 First bus adapter
+ 1 = /dev/logicalco/bci/1 First bus adapter
+ ...
+
+219 char The Logical Company DCI-1300 digital I/O card
+ 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
+ 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
+ ...
+
+220 char Myricom Myrinet "GM" board
+ 0 = /dev/myricom/gm0 First Myrinet GM board
+ 1 = /dev/myricom/gmp0 First board "root access"
+ 2 = /dev/myricom/gm1 Second Myrinet GM board
+ 3 = /dev/myricom/gmp1 Second board "root access"
+ ...
+
+221 char VME bus
+ 0 = /dev/bus/vme/m0 First master image
+ 1 = /dev/bus/vme/m1 Second master image
+ 2 = /dev/bus/vme/m2 Third master image
+ 3 = /dev/bus/vme/m3 Fourth master image
+ 4 = /dev/bus/vme/s0 First slave image
+ 5 = /dev/bus/vme/s1 Second slave image
+ 6 = /dev/bus/vme/s2 Third slave image
+ 7 = /dev/bus/vme/s3 Fourth slave image
+ 8 = /dev/bus/vme/ctl Control
+
+ It is expected that all VME bus drivers will use the
+ same interface. For interface documentation see
+ http://www.vmelinux.org/.
+
+224 char A2232 serial card
+ 0 = /dev/ttyY0 First A2232 port
+ 1 = /dev/ttyY1 Second A2232 port
+ ...
+
+225 char A2232 serial card (alternate devices)
+ 0 = /dev/cuy0 Callout device for ttyY0
+ 1 = /dev/cuy1 Callout device for ttyY1
+ ...
+
+226 char Direct Rendering Infrastructure (DRI)
+ 0 = /dev/dri/card0 First graphics card
+ 1 = /dev/dri/card1 Second graphics card
+ ...
+
+227 char IBM 3270 terminal Unix tty access
+ 1 = /dev/3270/tty1 First 3270 terminal
+ 2 = /dev/3270/tty2 Seconds 3270 terminal
+ ...
+
+228 char IBM 3270 terminal block-mode access
+ 0 = /dev/3270/tub Controlling interface
+ 1 = /dev/3270/tub1 First 3270 terminal
+ 2 = /dev/3270/tub2 Second 3270 terminal
+ ...
+
+229 char IBM iSeries virtual console
+ 0 = /dev/iseries/vtty0 First console port
+ 1 = /dev/iseries/vtty1 Second console port
+ ...
+
+230 char IBM iSeries virtual tape
+ 0 = /dev/iseries/vt0 First virtual tape, mode 0
+ 1 = /dev/iseries/vt1 Second virtual tape, mode 0
+ ...
+ 32 = /dev/iseries/vt0l First virtual tape, mode 1
+ 33 = /dev/iseries/vt1l Second virtual tape, mode 1
+ ...
+ 64 = /dev/iseries/vt0m First virtual tape, mode 2
+ 65 = /dev/iseries/vt1m Second virtual tape, mode 2
+ ...
+ 96 = /dev/iseries/vt0a First virtual tape, mode 3
+ 97 = /dev/iseries/vt1a Second virtual tape, mode 3
+ ...
+ 128 = /dev/iseries/nvt0 First virtual tape, mode 0, no rewind
+ 129 = /dev/iseries/nvt1 Second virtual tape, mode 0, no rewind
+ ...
+ 160 = /dev/iseries/nvt0l First virtual tape, mode 1, no rewind
+ 161 = /dev/iseries/nvt1l Second virtual tape, mode 1, no rewind
+ ...
+ 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
+ 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
+ ...
+ 224 = /dev/iseries/nvt0a First virtual tape, mode 3, no rewind
+ 225 = /dev/iseries/nvt1a Second virtual tape, mode 3, no rewind
+ ...
+
+ "No rewind" refers to the omission of the default
+ automatic rewind on device close. The MTREW or MTOFFL
+ ioctl()'s can be used to rewind the tape regardless of
+ the device used to access it.
+
+231 char InfiniBand MAD
+ 0 = /dev/infiniband/umad0
+ 1 = /dev/infiniband/umad1
+ ...
+
+232-239 UNASSIGNED
+
+240-254 char LOCAL/EXPERIMENTAL USE
+240-254 block LOCAL/EXPERIMENTAL USE
+ Allocated for local/experimental use. For devices not
+ assigned official numbers, these ranges should be
+ used in order to avoid conflicting with future assignments.
+
+255 char RESERVED
+255 block RESERVED
+
+ This major is reserved to assist the expansion to a
+ larger number space. No device nodes with this major
+ should ever be created on the filesystem.
+
+ **** ADDITIONAL /dev DIRECTORY ENTRIES
+
+This section details additional entries that should or may exist in
+the /dev directory. It is preferred that symbolic links use the same
+form (absolute or relative) as is indicated here. Links are
+classified as "hard" or "symbolic" depending on the preferred type of
+link; if possible, the indicated type of link should be used.
+
+
+ Compulsory links
+
+These links should exist on all systems:
+
+/dev/fd /proc/self/fd symbolic File descriptors
+/dev/stdin fd/0 symbolic stdin file descriptor
+/dev/stdout fd/1 symbolic stdout file descriptor
+/dev/stderr fd/2 symbolic stderr file descriptor
+/dev/nfsd socksys symbolic Required by iBCS-2
+/dev/X0R null symbolic Required by iBCS-2
+
+Note: /dev/X0R is <letter X>-<digit 0>-<letter R>.
+
+ Recommended links
+
+It is recommended that these links exist on all systems:
+
+/dev/core /proc/kcore symbolic Backward compatibility
+/dev/ramdisk ram0 symbolic Backward compatibility
+/dev/ftape qft0 symbolic Backward compatibility
+/dev/bttv0 video0 symbolic Backward compatibility
+/dev/radio radio0 symbolic Backward compatibility
+/dev/i2o* /dev/i2o/* symbolic Backward compatibility
+/dev/scd? sr? hard Alternate SCSI CD-ROM name
+
+ Locally defined links
+
+The following links may be established locally to conform to the
+configuration of the system. This is merely a tabulation of existing
+practice, and does not constitute a recommendation. However, if they
+exist, they should have the following uses.
+
+/dev/mouse mouse port symbolic Current mouse device
+/dev/tape tape device symbolic Current tape device
+/dev/cdrom CD-ROM device symbolic Current CD-ROM device
+/dev/cdwriter CD-writer symbolic Current CD-writer device
+/dev/scanner scanner symbolic Current scanner device
+/dev/modem modem port symbolic Current dialout device
+/dev/root root device symbolic Current root filesystem
+/dev/swap swap device symbolic Current swap device
+
+/dev/modem should not be used for a modem which supports dialin as
+well as dialout, as it tends to cause lock file problems. If it
+exists, /dev/modem should point to the appropriate primary TTY device
+(the use of the alternate callout devices is deprecated).
+
+For SCSI devices, /dev/tape and /dev/cdrom should point to the
+``cooked'' devices (/dev/st* and /dev/sr*, respectively), whereas
+/dev/cdwriter and /dev/scanner should point to the appropriate generic
+SCSI devices (/dev/sg*).
+
+/dev/mouse may point to a primary serial TTY device, a hardware mouse
+device, or a socket for a mouse driver program (e.g. /dev/gpmdata).
+
+ Sockets and pipes
+
+Non-transient sockets and named pipes may exist in /dev. Common entries are:
+
+/dev/printer socket lpd local socket
+/dev/log socket syslog local socket
+/dev/gpmdata socket gpm mouse multiplexer
+
+ Mount points
+
+The following names are reserved for mounting special filesystems
+under /dev. These special filesystems provide kernel interfaces that
+cannot be provided with standard device nodes.
+
+/dev/pts devpts PTY slave filesystem
+/dev/shm tmpfs POSIX shared memory maintenance access
+
+ **** TERMINAL DEVICES
+
+Terminal, or TTY devices are a special class of character devices. A
+terminal device is any device that could act as a controlling terminal
+for a session; this includes virtual consoles, serial ports, and
+pseudoterminals (PTYs).
+
+All terminal devices share a common set of capabilities known as line
+diciplines; these include the common terminal line dicipline as well
+as SLIP and PPP modes.
+
+All terminal devices are named similarly; this section explains the
+naming and use of the various types of TTYs. Note that the naming
+conventions include several historical warts; some of these are
+Linux-specific, some were inherited from other systems, and some
+reflect Linux outgrowing a borrowed convention.
+
+A hash mark (#) in a device name is used here to indicate a decimal
+number without leading zeroes.
+
+ Virtual consoles and the console device
+
+Virtual consoles are full-screen terminal displays on the system video
+monitor. Virtual consoles are named /dev/tty#, with numbering
+starting at /dev/tty1; /dev/tty0 is the current virtual console.
+/dev/tty0 is the device that should be used to access the system video
+card on those architectures for which the frame buffer devices
+(/dev/fb*) are not applicable. Do not use /dev/console
+for this purpose.
+
+The console device, /dev/console, is the device to which system
+messages should be sent, and on which logins should be permitted in
+single-user mode. Starting with Linux 2.1.71, /dev/console is managed
+by the kernel; for previous versions it should be a symbolic link to
+either /dev/tty0, a specific virtual console such as /dev/tty1, or to
+a serial port primary (tty*, not cu*) device, depending on the
+configuration of the system.
+
+ Serial ports
+
+Serial ports are RS-232 serial ports and any device which simulates
+one, either in hardware (such as internal modems) or in software (such
+as the ISDN driver.) Under Linux, each serial ports has two device
+names, the primary or callin device and the alternate or callout one.
+Each kind of device is indicated by a different letter. For any
+letter X, the names of the devices are /dev/ttyX# and /dev/cux#,
+respectively; for historical reasons, /dev/ttyS# and /dev/ttyC#
+correspond to /dev/cua# and /dev/cub#. In the future, it should be
+expected that multiple letters will be used; all letters will be upper
+case for the "tty" device (e.g. /dev/ttyDP#) and lower case for the
+"cu" device (e.g. /dev/cudp#).
+
+The names /dev/ttyQ# and /dev/cuq# are reserved for local use.
+
+The alternate devices provide for kernel-based exclusion and somewhat
+different defaults than the primary devices. Their main purpose is to
+allow the use of serial ports with programs with no inherent or broken
+support for serial ports. Their use is deprecated, and they may be
+removed from a future version of Linux.
+
+Arbitration of serial ports is provided by the use of lock files with
+the names /var/lock/LCK..ttyX#. The contents of the lock file should
+be the PID of the locking process as an ASCII number.
+
+It is common practice to install links such as /dev/modem
+which point to serial ports. In order to ensure proper locking in the
+presence of these links, it is recommended that software chase
+symlinks and lock all possible names; additionally, it is recommended
+that a lock file be installed with the corresponding alternate
+device. In order to avoid deadlocks, it is recommended that the locks
+are acquired in the following order, and released in the reverse:
+
+ 1. The symbolic link name, if any (/var/lock/LCK..modem)
+ 2. The "tty" name (/var/lock/LCK..ttyS2)
+ 3. The alternate device name (/var/lock/LCK..cua2)
+
+In the case of nested symbolic links, the lock files should be
+installed in the order the symlinks are resolved.
+
+Under no circumstances should an application hold a lock while waiting
+for another to be released. In addition, applications which attempt
+to create lock files for the corresponding alternate device names
+should take into account the possibility of being used on a non-serial
+port TTY, for which no alternate device would exist.
+
+ Pseudoterminals (PTYs)
+
+Pseudoterminals, or PTYs, are used to create login sessions or provide
+other capabilities requiring a TTY line dicipline (including SLIP or
+PPP capability) to arbitrary data-generation processes. Each PTY has
+a master side, named /dev/pty[p-za-e][0-9a-f], and a slave side, named
+/dev/tty[p-za-e][0-9a-f]. The kernel arbitrates the use of PTYs by
+allowing each master side to be opened only once.
+
+Once the master side has been opened, the corresponding slave device
+can be used in the same manner as any TTY device. The master and
+slave devices are connected by the kernel, generating the equivalent
+of a bidirectional pipe with TTY capabilities.
+
+Recent versions of the Linux kernels and GNU libc contain support for
+the System V/Unix98 naming scheme for PTYs, which assigns a common
+device, /dev/ptmx, to all the masters (opening it will automatically
+give you a previously unassigned PTY) and a subdirectory, /dev/pts,
+for the slaves; the slaves are named with decimal integers (/dev/pts/#
+in our notation). This removes the problem of exhausting the
+namespace and enables the kernel to automatically create the device
+nodes for the slaves on demand using the "devpts" filesystem.
+