diff options
123 files changed, 7603 insertions, 3235 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index de44fb6ef62..c16cce63b8a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -662,6 +662,12 @@ T: git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-mx*/ F: arch/arm/plat-mxc/ +ARM/FREESCALE IMX51 +M: Amit Kucheria <amit.kucheria@canonical.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-mx5/ + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f34d462e881..7ac8386c700 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -310,10 +310,9 @@ config ARCH_MXC bool "Freescale MXC/iMX-based" select GENERIC_TIME select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select COMMON_CLKDEV help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 215a5cdd3d7..a99aafebdfb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1 machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXC91231) := mxc91231 machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig deleted file mode 100644 index 3cabbb6d927..00000000000 --- a/arch/arm/configs/mx1ads_defconfig +++ /dev/null @@ -1,742 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 02:15:46 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_SYSCTL is not set -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -CONFIG_ARCH_IMX=y -# CONFIG_ARCH_H720X is not set - -# -# IMX Implementations -# -CONFIG_ARCH_MX1ADS=y - -# -# Processor Type -# -CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set - -# -# Bus support -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_PREEMPT=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_FPE_FASTFPE=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=y -# CONFIG_PPP_MULTILINK is not set -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index edfdd6faf80..b4c1366e9e0 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y CONFIG_MACH_MX27_3DS=y -CONFIG_MACH_MX27LITE=y +CONFIG_MACH_IMX27LITE=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig new file mode 100644 index 00000000000..c88e9527a8e --- /dev/null +++ b/arch/arm/configs/mx51_defconfig @@ -0,0 +1,1286 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc6 +# Tue Feb 2 15:20:48 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX25 is not set +# CONFIG_ARCH_MX3 is not set +# CONFIG_ARCH_MXC91231 is not set +CONFIG_ARCH_MX5=y +CONFIG_ARCH_MX51=y + +# +# MX5 platforms: +# +CONFIG_MACH_MX51_BABBAGE=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_TZIC=y +# CONFIG_MXC_PWM is not set +CONFIG_ARCH_MXC_IOMUX_V3=y + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_PM_TEST_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_GPIO=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=m +# CONFIG_I2C_HELPER_AUTO is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_IMX is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +# CONFIG_MMC_SDHCI_PLTFM is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_MXC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_MXC is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile index 7f86fe073ec..fc2ddf82441 100644 --- a/arch/arm/mach-mx1/Makefile +++ b/arch/arm/mach-mx1/Makefile @@ -4,11 +4,12 @@ # Object file lists. +EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS obj-y += generic.o clock.o devices.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o # Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o -obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file +obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c index 30f04e56faf..51f3cfd83db 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mach-mx1ads.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-imx/mx1ads.c + * arch/arm/mach-imx/mach-mx1ads.c * * Initially based on: * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c @@ -27,7 +27,7 @@ #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx1.h> #include <mach/irqs.h> #include "devices.h" @@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, .timer = &mx1ads_timer, @@ -157,7 +157,7 @@ MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, .timer = &mx1ads_timer, diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c index 325d98df605..7587a7a1246 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/mach-scb9328.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-mx1/scb9328.c + * linux/arch/arm/mach-mx1/mach-scb9328.c * * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> @@ -23,7 +23,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx1.h> #include "devices.h" diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index b96c6a38936..742fd4e6dcb 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -37,6 +37,7 @@ config MACH_MX27ADS config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" depends on MACH_MX27 + select MXC_ULPI if USB_ULPI help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. @@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD endchoice -config MACH_EUKREA_CPUIMX27 +config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" depends on MACH_MX27 help @@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27 config MACH_EUKREA_CPUIMX27_USESDHC2 bool "CPUIMX27 integrates SDHC2 module" - depends on MACH_EUKREA_CPUIMX27 + depends on MACH_CPUIMX27 help This adds support for the internal SDHC2 used on CPUIMX27 used for wifi or eMMC. choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX27 + depends on MACH_CPUIMX27 default MACH_EUKREA_MBIMX27_BASEBOARD config MACH_EUKREA_MBIMX27_BASEBOARD @@ -90,7 +91,7 @@ config MACH_MX27_3DS Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_MX27LITE +config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" depends on MACH_MX27 help @@ -100,6 +101,7 @@ config MACH_MX27LITE config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" depends on MACH_MX27 + select MXC_ULPI if USB_ULPI help Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 52aca0aaf9b..e3254faac82 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,21 +4,20 @@ # Object file lists. -obj-y := generic.o devices.o serial.o +obj-y := devices.o serial.o -obj-$(CONFIG_MACH_MX21) += clock_imx21.o +obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o -obj-$(CONFIG_MACH_MX27) += clock_imx27.o +obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o -obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o -obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o -obj-$(CONFIG_MACH_PCM038) += pcm038.o +obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o +obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o +obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o -obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o -obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o +obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o +obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o +obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o -obj-$(CONFIG_MACH_PCA100) += pca100.o -obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o - +obj-$(CONFIG_MACH_PCA100) += mach-pca100.o +obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 91901b5d56c..8974faf9cef 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -23,11 +23,242 @@ #include <linux/module.h> #include <mach/clock.h> +#include <mach/hardware.h> #include <mach/common.h> #include <asm/clkdev.h> #include <asm/div64.h> -#include "crm_regs.h" +#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off))) + +/* Register offsets */ +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_MPCTL1 IO_ADDR_CCM(0x8) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_SPCTL1 IO_ADDR_CCM(0x10) +#define CCM_OSC26MCTL IO_ADDR_CCM(0x14) +#define CCM_PCDR0 IO_ADDR_CCM(0x18) +#define CCM_PCDR1 IO_ADDR_CCM(0x1c) +#define CCM_PCCR0 IO_ADDR_CCM(0x20) +#define CCM_PCCR1 IO_ADDR_CCM(0x24) +#define CCM_CCSR IO_ADDR_CCM(0x28) +#define CCM_PMCTL IO_ADDR_CCM(0x2c) +#define CCM_PMCOUNT IO_ADDR_CCM(0x30) +#define CCM_WKGDCTL IO_ADDR_CCM(0x34) + +#define CCM_CSCR_PRESC_OFFSET 29 +#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET) + +#define CCM_CSCR_USB_OFFSET 26 +#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET) +#define CCM_CSCR_SD_OFFSET 24 +#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET) +#define CCM_CSCR_SPLLRES (1 << 22) +#define CCM_CSCR_MPLLRES (1 << 21) +#define CCM_CSCR_SSI2_OFFSET 20 +#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET) +#define CCM_CSCR_SSI1_OFFSET 19 +#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET) +#define CCM_CSCR_FIR_OFFSET 18 +#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET) +#define CCM_CSCR_SP (1 << 17) +#define CCM_CSCR_MCU (1 << 16) +#define CCM_CSCR_BCLK_OFFSET 10 +#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET) +#define CCM_CSCR_IPDIV_OFFSET 9 +#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET) + +#define CCM_CSCR_OSC26MDIV (1 << 4) +#define CCM_CSCR_OSC26M (1 << 3) +#define CCM_CSCR_FPM (1 << 2) +#define CCM_CSCR_SPEN (1 << 1) +#define CCM_CSCR_MPEN 1 + +#define CCM_MPCTL0_CPLM (1 << 31) +#define CCM_MPCTL0_PD_OFFSET 26 +#define CCM_MPCTL0_PD_MASK (0xf << 26) +#define CCM_MPCTL0_MFD_OFFSET 16 +#define CCM_MPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_MPCTL0_MFI_OFFSET 10 +#define CCM_MPCTL0_MFI_MASK (0xf << 10) +#define CCM_MPCTL0_MFN_OFFSET 0 +#define CCM_MPCTL0_MFN_MASK 0x3ff + +#define CCM_MPCTL1_LF (1 << 15) +#define CCM_MPCTL1_BRMO (1 << 6) + +#define CCM_SPCTL0_CPLM (1 << 31) +#define CCM_SPCTL0_PD_OFFSET 26 +#define CCM_SPCTL0_PD_MASK (0xf << 26) +#define CCM_SPCTL0_MFD_OFFSET 16 +#define CCM_SPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_SPCTL0_MFI_OFFSET 10 +#define CCM_SPCTL0_MFI_MASK (0xf << 10) +#define CCM_SPCTL0_MFN_OFFSET 0 +#define CCM_SPCTL0_MFN_MASK 0x3ff + +#define CCM_SPCTL1_LF (1 << 15) +#define CCM_SPCTL1_BRMO (1 << 6) + +#define CCM_OSC26MCTL_PEAK_OFFSET 16 +#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16) +#define CCM_OSC26MCTL_AGC_OFFSET 8 +#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8) +#define CCM_OSC26MCTL_ANATEST_OFFSET 0 +#define CCM_OSC26MCTL_ANATEST_MASK 0x3f + +#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 +#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) +#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 +#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) +#define CCM_PCDR0_NFCDIV_OFFSET 12 +#define CCM_PCDR0_NFCDIV_MASK (0xf << 12) +#define CCM_PCDR0_48MDIV_OFFSET 5 +#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET) +#define CCM_PCDR0_FIRIDIV_OFFSET 0 +#define CCM_PCDR0_FIRIDIV_MASK 0x1f +#define CCM_PCDR1_PERDIV4_OFFSET 24 +#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) +#define CCM_PCDR1_PERDIV3_OFFSET 16 +#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16) +#define CCM_PCDR1_PERDIV2_OFFSET 8 +#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8) +#define CCM_PCDR1_PERDIV1_OFFSET 0 +#define CCM_PCDR1_PERDIV1_MASK 0x3f + +#define CCM_PCCR_HCLK_CSI_OFFSET 31 +#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_DMA_OFFSET 30 +#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_BROM_OFFSET 28 +#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_EMMA_OFFSET 27 +#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_LCDC_OFFSET 26 +#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_SLCDC_OFFSET 25 +#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_USBOTG_OFFSET 24 +#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_BMI_OFFSET 23 +#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK) +#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0 +#define CCM_PCCR_PERCLK4_OFFSET 22 +#define CCM_PCCR_PERCLK4_REG CCM_PCCR0 +#define CCM_PCCR_SLCDC_OFFSET 21 +#define CCM_PCCR_SLCDC_REG CCM_PCCR0 +#define CCM_PCCR_FIRI_BAUD_OFFSET 20 +#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK) +#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_NFC_OFFSET 19 +#define CCM_PCCR_NFC_REG CCM_PCCR0 +#define CCM_PCCR_LCDC_OFFSET 18 +#define CCM_PCCR_LCDC_REG CCM_PCCR0 +#define CCM_PCCR_SSI1_BAUD_OFFSET 17 +#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_SSI2_BAUD_OFFSET 16 +#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_EMMA_OFFSET 15 +#define CCM_PCCR_EMMA_REG CCM_PCCR0 +#define CCM_PCCR_USBOTG_OFFSET 14 +#define CCM_PCCR_USBOTG_REG CCM_PCCR0 +#define CCM_PCCR_DMA_OFFSET 13 +#define CCM_PCCR_DMA_REG CCM_PCCR0 +#define CCM_PCCR_I2C1_OFFSET 12 +#define CCM_PCCR_I2C1_REG CCM_PCCR0 +#define CCM_PCCR_GPIO_OFFSET 11 +#define CCM_PCCR_GPIO_REG CCM_PCCR0 +#define CCM_PCCR_SDHC2_OFFSET 10 +#define CCM_PCCR_SDHC2_REG CCM_PCCR0 +#define CCM_PCCR_SDHC1_OFFSET 9 +#define CCM_PCCR_SDHC1_REG CCM_PCCR0 +#define CCM_PCCR_FIRI_OFFSET 8 +#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK) +#define CCM_PCCR_FIRI_REG CCM_PCCR0 +#define CCM_PCCR_SSI2_IPG_OFFSET 7 +#define CCM_PCCR_SSI2_REG CCM_PCCR0 +#define CCM_PCCR_SSI1_IPG_OFFSET 6 +#define CCM_PCCR_SSI1_REG CCM_PCCR0 +#define CCM_PCCR_CSPI2_OFFSET 5 +#define CCM_PCCR_CSPI2_REG CCM_PCCR0 +#define CCM_PCCR_CSPI1_OFFSET 4 +#define CCM_PCCR_CSPI1_REG CCM_PCCR0 +#define CCM_PCCR_UART4_OFFSET 3 +#define CCM_PCCR_UART4_REG CCM_PCCR0 +#define CCM_PCCR_UART3_OFFSET 2 +#define CCM_PCCR_UART3_REG CCM_PCCR0 +#define CCM_PCCR_UART2_OFFSET 1 +#define CCM_PCCR_UART2_REG CCM_PCCR0 +#define CCM_PCCR_UART1_OFFSET 0 +#define CCM_PCCR_UART1_REG CCM_PCCR0 + +#define CCM_PCCR_OWIRE_OFFSET 31 +#define CCM_PCCR_OWIRE_REG CCM_PCCR1 +#define CCM_PCCR_KPP_OFFSET 30 +#define CCM_PCCR_KPP_REG CCM_PCCR1 +#define CCM_PCCR_RTC_OFFSET 29 +#define CCM_PCCR_RTC_REG CCM_PCCR1 +#define CCM_PCCR_PWM_OFFSET 28 +#define CCM_PCCR_PWM_REG CCM_PCCR1 +#define CCM_PCCR_GPT3_OFFSET 27 +#define CCM_PCCR_GPT3_REG CCM_PCCR1 +#define CCM_PCCR_GPT2_OFFSET 26 +#define CCM_PCCR_GPT2_REG CCM_PCCR1 +#define CCM_PCCR_GPT1_OFFSET 25 +#define CCM_PCCR_GPT1_REG CCM_PCCR1 +#define CCM_PCCR_WDT_OFFSET 24 +#define CCM_PCCR_WDT_REG CCM_PCCR1 +#define CCM_PCCR_CSPI3_OFFSET 23 +#define CCM_PCCR_CSPI3_REG CCM_PCCR1 + +#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET) +#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET) +#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET) +#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET) +#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET) +#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET) +#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET) +#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET) +#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET) +#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET) +#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET) +#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET) +#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET) +#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET) +#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET) +#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET) +#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET) +#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET) +#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET) +#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET) +#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET) +#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET) +#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET) +#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET) +#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET) +#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET) +#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET) +#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET) +#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET) +#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET) +#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET) +#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET) +#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET) +#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET) +#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET) +#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET) +#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET) + +#define CCM_CCSR_32KSR (1 << 15) + +#define CCM_CCSR_CLKMODE1 (1 << 9) +#define CCM_CCSR_CLKMODE0 (1 << 8) + +#define CCM_CCSR_CLKOSEL_OFFSET 0 +#define CCM_CCSR_CLKOSEL_MASK 0x1f + +#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */ +#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ static int _clk_enable(struct clk *clk) { @@ -1004,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_enable(&uart_clk[0]); #endif - mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1); + mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), + MX21_INT_GPT1); return 0; } diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index b010bf9ceaa..68bf93e6e90 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -29,21 +29,23 @@ #include <mach/common.h> #include <mach/hardware.h> +#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off))) + /* Register offsets */ -#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) -#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) -#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) -#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) -#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) -#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) -#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) -#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) -#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) -#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) -#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) -#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) -#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) -#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_MPCTL1 IO_ADDR_CCM(0x8) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_SPCTL1 IO_ADDR_CCM(0x10) +#define CCM_OSC26MCTL IO_ADDR_CCM(0x14) +#define CCM_PCDR0 IO_ADDR_CCM(0x18) +#define CCM_PCDR1 IO_ADDR_CCM(0x1c) +#define CCM_PCCR0 IO_ADDR_CCM(0x20) +#define CCM_PCCR1 IO_ADDR_CCM(0x24) +#define CCM_CCSR IO_ADDR_CCM(0x28) +#define CCM_PMCTL IO_ADDR_CCM(0x2c) +#define CCM_PMCOUNT IO_ADDR_CCM(0x30) +#define CCM_WKGDCTL IO_ADDR_CCM(0x34) #define CCM_CSCR_UPDATE_DIS (1 << 31) #define CCM_CSCR_SSI2 (1 << 23) @@ -755,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&uart1_clk); #endif - mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1); + mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), + MX27_INT_GPT1); return 0; } diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c index d9e3bf9644c..d8d3b2d84dc 100644 --- a/arch/arm/mach-mx2/cpu_imx27.c +++ b/arch/arm/mach-mx2/cpu_imx27.c @@ -39,7 +39,8 @@ static void query_silicon_parameter(void) * the silicon revision very early we read it here to * avoid any further hooks */ - val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID); + val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + + SYS_CHIP_ID)); cpu_silicon_rev = (int)(val >> 28); cpu_partnumber = (int)((val >> 12) & 0xFFFF); diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h deleted file mode 100644 index 749de76b3f9..00000000000 --- a/arch/arm/mach-mx2/crm_regs.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__ -#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__ - -#include <mach/hardware.h> - -/* Register offsets */ -#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) -#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) -#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) -#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) -#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) -#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) -#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) -#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) -#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) -#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) -#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) -#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) -#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) -#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) - -#define CCM_CSCR_PRESC_OFFSET 29 -#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET) - -#define CCM_CSCR_USB_OFFSET 26 -#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET) -#define CCM_CSCR_SD_OFFSET 24 -#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET) -#define CCM_CSCR_SPLLRES (1 << 22) -#define CCM_CSCR_MPLLRES (1 << 21) -#define CCM_CSCR_SSI2_OFFSET 20 -#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET) -#define CCM_CSCR_SSI1_OFFSET 19 -#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET) -#define CCM_CSCR_FIR_OFFSET 18 -#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET) -#define CCM_CSCR_SP (1 << 17) -#define CCM_CSCR_MCU (1 << 16) -#define CCM_CSCR_BCLK_OFFSET 10 -#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET) -#define CCM_CSCR_IPDIV_OFFSET 9 -#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET) - -#define CCM_CSCR_OSC26MDIV (1 << 4) -#define CCM_CSCR_OSC26M (1 << 3) -#define CCM_CSCR_FPM (1 << 2) -#define CCM_CSCR_SPEN (1 << 1) -#define CCM_CSCR_MPEN 1 - - - -#define CCM_MPCTL0_CPLM (1 << 31) -#define CCM_MPCTL0_PD_OFFSET 26 -#define CCM_MPCTL0_PD_MASK (0xf << 26) -#define CCM_MPCTL0_MFD_OFFSET 16 -#define CCM_MPCTL0_MFD_MASK (0x3ff << 16) -#define CCM_MPCTL0_MFI_OFFSET 10 -#define CCM_MPCTL0_MFI_MASK (0xf << 10) -#define CCM_MPCTL0_MFN_OFFSET 0 -#define CCM_MPCTL0_MFN_MASK 0x3ff - -#define CCM_MPCTL1_LF (1 << 15) -#define CCM_MPCTL1_BRMO (1 << 6) - -#define CCM_SPCTL0_CPLM (1 << 31) -#define CCM_SPCTL0_PD_OFFSET 26 -#define CCM_SPCTL0_PD_MASK (0xf << 26) -#define CCM_SPCTL0_MFD_OFFSET 16 -#define CCM_SPCTL0_MFD_MASK (0x3ff << 16) -#define CCM_SPCTL0_MFI_OFFSET 10 -#define CCM_SPCTL0_MFI_MASK (0xf << 10) -#define CCM_SPCTL0_MFN_OFFSET 0 -#define CCM_SPCTL0_MFN_MASK 0x3ff - -#define CCM_SPCTL1_LF (1 << 15) -#define CCM_SPCTL1_BRMO (1 << 6) - -#define CCM_OSC26MCTL_PEAK_OFFSET 16 -#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16) -#define CCM_OSC26MCTL_AGC_OFFSET 8 -#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8) -#define CCM_OSC26MCTL_ANATEST_OFFSET 0 -#define CCM_OSC26MCTL_ANATEST_MASK 0x3f - -#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 -#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) -#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 -#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) -#define CCM_PCDR0_NFCDIV_OFFSET 12 -#define CCM_PCDR0_NFCDIV_MASK (0xf << 12) -#define CCM_PCDR0_48MDIV_OFFSET 5 -#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET) -#define CCM_PCDR0_FIRIDIV_OFFSET 0 -#define CCM_PCDR0_FIRIDIV_MASK 0x1f -#define CCM_PCDR1_PERDIV4_OFFSET 24 -#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) -#define CCM_PCDR1_PERDIV3_OFFSET 16 -#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16) -#define CCM_PCDR1_PERDIV2_OFFSET 8 -#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8) -#define CCM_PCDR1_PERDIV1_OFFSET 0 -#define CCM_PCDR1_PERDIV1_MASK 0x3f - -#define CCM_PCCR_HCLK_CSI_OFFSET 31 -#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_DMA_OFFSET 30 -#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_BROM_OFFSET 28 -#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_EMMA_OFFSET 27 -#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_LCDC_OFFSET 26 -#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_SLCDC_OFFSET 25 -#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_USBOTG_OFFSET 24 -#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_BMI_OFFSET 23 -#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK) -#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0 -#define CCM_PCCR_PERCLK4_OFFSET 22 -#define CCM_PCCR_PERCLK4_REG CCM_PCCR0 -#define CCM_PCCR_SLCDC_OFFSET 21 -#define CCM_PCCR_SLCDC_REG CCM_PCCR0 -#define CCM_PCCR_FIRI_BAUD_OFFSET 20 -#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK) -#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0 -#define CCM_PCCR_NFC_OFFSET 19 -#define CCM_PCCR_NFC_REG CCM_PCCR0 -#define CCM_PCCR_LCDC_OFFSET 18 -#define CCM_PCCR_LCDC_REG CCM_PCCR0 -#define CCM_PCCR_SSI1_BAUD_OFFSET 17 -#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0 -#define CCM_PCCR_SSI2_BAUD_OFFSET 16 -#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0 -#define CCM_PCCR_EMMA_OFFSET 15 -#define CCM_PCCR_EMMA_REG CCM_PCCR0 -#define CCM_PCCR_USBOTG_OFFSET 14 -#define CCM_PCCR_USBOTG_REG CCM_PCCR0 -#define CCM_PCCR_DMA_OFFSET 13 -#define CCM_PCCR_DMA_REG CCM_PCCR0 -#define CCM_PCCR_I2C1_OFFSET 12 -#define CCM_PCCR_I2C1_REG CCM_PCCR0 -#define CCM_PCCR_GPIO_OFFSET 11 -#define CCM_PCCR_GPIO_REG CCM_PCCR0 -#define CCM_PCCR_SDHC2_OFFSET 10 -#define CCM_PCCR_SDHC2_REG CCM_PCCR0 -#define CCM_PCCR_SDHC1_OFFSET 9 -#define CCM_PCCR_SDHC1_REG CCM_PCCR0 -#define CCM_PCCR_FIRI_OFFSET 8 -#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK) -#define CCM_PCCR_FIRI_REG CCM_PCCR0 -#define CCM_PCCR_SSI2_IPG_OFFSET 7 -#define CCM_PCCR_SSI2_REG CCM_PCCR0 -#define CCM_PCCR_SSI1_IPG_OFFSET 6 -#define CCM_PCCR_SSI1_REG CCM_PCCR0 -#define CCM_PCCR_CSPI2_OFFSET 5 -#define CCM_PCCR_CSPI2_REG CCM_PCCR0 -#define CCM_PCCR_CSPI1_OFFSET 4 -#define CCM_PCCR_CSPI1_REG CCM_PCCR0 -#define CCM_PCCR_UART4_OFFSET 3 -#define CCM_PCCR_UART4_REG CCM_PCCR0 -#define CCM_PCCR_UART3_OFFSET 2 -#define CCM_PCCR_UART3_REG CCM_PCCR0 -#define CCM_PCCR_UART2_OFFSET 1 -#define CCM_PCCR_UART2_REG CCM_PCCR0 -#define CCM_PCCR_UART1_OFFSET 0 -#define CCM_PCCR_UART1_REG CCM_PCCR0 - -#define CCM_PCCR_OWIRE_OFFSET 31 -#define CCM_PCCR_OWIRE_REG CCM_PCCR1 -#define CCM_PCCR_KPP_OFFSET 30 -#define CCM_PCCR_KPP_REG CCM_PCCR1 -#define CCM_PCCR_RTC_OFFSET 29 -#define CCM_PCCR_RTC_REG CCM_PCCR1 -#define CCM_PCCR_PWM_OFFSET 28 -#define CCM_PCCR_PWM_REG CCM_PCCR1 -#define CCM_PCCR_GPT3_OFFSET 27 -#define CCM_PCCR_GPT3_REG CCM_PCCR1 -#define CCM_PCCR_GPT2_OFFSET 26 -#define CCM_PCCR_GPT2_REG CCM_PCCR1 -#define CCM_PCCR_GPT1_OFFSET 25 -#define CCM_PCCR_GPT1_REG CCM_PCCR1 -#define CCM_PCCR_WDT_OFFSET 24 -#define CCM_PCCR_WDT_REG CCM_PCCR1 -#define CCM_PCCR_CSPI3_OFFSET 23 -#define CCM_PCCR_CSPI3_REG CCM_PCCR1 - -#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET) -#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET) -#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET) -#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET) -#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET) -#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET) -#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET) -#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET) -#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET) -#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET) -#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET) -#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET) -#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET) -#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET) -#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET) -#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET) -#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET) -#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET) -#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET) -#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET) -#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET) -#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET) -#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET) -#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET) -#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET) -#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET) -#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET) -#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET) -#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET) -#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET) -#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET) -#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET) -#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET) -#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET) -#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET) -#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET) -#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET) - - -#define CCM_CCSR_32KSR (1 << 15) - -#define CCM_CCSR_CLKMODE1 (1 << 9) -#define CCM_CCSR_CLKMODE0 (1 << 8) - -#define CCM_CCSR_CLKOSEL_OFFSET 0 -#define CCM_CCSR_CLKOSEL_MASK 0x1f - -#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */ -#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ - -#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 3d398ce09b3..a4b809b82fa 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -46,65 +46,31 @@ * - i.MX21: 2 channel * - i.MX27: 3 channel */ -static struct resource mxc_spi_resources0[] = { - { - .start = CSPI1_BASE_ADDR, - .end = CSPI1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI1, - .end = MXC_INT_CSPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_spi_resources1[] = { - { - .start = CSPI2_BASE_ADDR, - .end = CSPI2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI2, - .end = MXC_INT_CSPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -#ifdef CONFIG_MACH_MX27 -static struct resource mxc_spi_resources2[] = { - { - .start = CSPI3_BASE_ADDR, - .end = CSPI3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI3, - .end = MXC_INT_CSPI3, - .flags = IORESOURCE_IRQ, - }, -}; -#endif - -struct platform_device mxc_spi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_spi_resources0), - .resource = mxc_spi_resources0, -}; +#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \ + static struct resource mxc_spi_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }; \ + \ + struct platform_device mxc_spi_device ## n = { \ + .name = "spi_imx", \ + .id = n, \ + .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \ + .resource = mxc_spi_resources ## n, \ + } -struct platform_device mxc_spi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_spi_resources1), - .resource = mxc_spi_resources1, -}; +DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1); +DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2); #ifdef CONFIG_MACH_MX27 -struct platform_device mxc_spi_device2 = { - .name = "spi_imx", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_spi_resources2), - .resource = mxc_spi_resources2, -}; +DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3); #endif /* @@ -112,104 +78,34 @@ struct platform_device mxc_spi_device2 = { * - i.MX21: 3 timers * - i.MX27: 6 timers */ - -/* We use gpt0 as system timer, so do not add a device for this one */ - -static struct resource timer1_resources[] = { - { - .start = GPT2_BASE_ADDR, - .end = GPT2_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT2, - .end = MXC_INT_GPT2, - .flags = IORESOURCE_IRQ, +#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \ + static struct resource timer ## n ##_resources[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + } \ + }; \ + \ + struct platform_device mxc_gpt ## n = { \ + .name = "imx_gpt", \ + .id = n, \ + .num_resources = ARRAY_SIZE(timer ## n ## _resources), \ + .resource = timer ## n ## _resources, \ } -}; - -struct platform_device mxc_gpt1 = { - .name = "imx_gpt", - .id = 1, - .num_resources = ARRAY_SIZE(timer1_resources), - .resource = timer1_resources, -}; -static struct resource timer2_resources[] = { - { - .start = GPT3_BASE_ADDR, - .end = GPT3_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT3, - .end = MXC_INT_GPT3, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt2 = { - .name = "imx_gpt", - .id = 2, - .num_resources = ARRAY_SIZE(timer2_resources), - .resource = timer2_resources, -}; +/* We use gpt1 as system timer, so do not add a device for this one */ +DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2); +DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3); #ifdef CONFIG_MACH_MX27 -static struct resource timer3_resources[] = { - { - .start = GPT4_BASE_ADDR, - .end = GPT4_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT4, - .end = MXC_INT_GPT4, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt3 = { - .name = "imx_gpt", - .id = 3, - .num_resources = ARRAY_SIZE(timer3_resources), - .resource = timer3_resources, -}; - -static struct resource timer4_resources[] = { - { - .start = GPT5_BASE_ADDR, - .end = GPT5_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT5, - .end = MXC_INT_GPT5, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt4 = { - .name = "imx_gpt", - .id = 4, - .num_resources = ARRAY_SIZE(timer4_resources), - .resource = timer4_resources, -}; - -static struct resource timer5_resources[] = { - { - .start = GPT6_BASE_ADDR, - .end = GPT6_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT6, - .end = MXC_INT_GPT6, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt5 = { - .name = "imx_gpt", - .id = 5, - .num_resources = ARRAY_SIZE(timer5_resources), - .resource = timer5_resources, -}; +DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4); +DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5); +DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6); #endif /* @@ -220,9 +116,9 @@ struct platform_device mxc_gpt5 = { */ static struct resource mxc_wdt_resources[] = { { - .start = WDOG_BASE_ADDR, - .end = WDOG_BASE_ADDR + 0x30, - .flags = IORESOURCE_MEM, + .start = MX2x_WDOG_BASE_ADDR, + .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, }; @@ -235,8 +131,8 @@ struct platform_device mxc_wdt = { static struct resource mxc_w1_master_resources[] = { { - .start = OWIRE_BASE_ADDR, - .end = OWIRE_BASE_ADDR + SZ_4K - 1, + .start = MX2x_OWIRE_BASE_ADDR, + .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -248,24 +144,33 @@ struct platform_device mxc_w1_master_device = { .resource = mxc_w1_master_resources, }; -static struct resource mxc_nand_resources[] = { - { - .start = NFC_BASE_ADDR, - .end = NFC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_NANDFC, - .end = MXC_INT_NANDFC, - .flags = IORESOURCE_IRQ, - }, -}; +#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \ + static struct resource pfx ## _nand_resources[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }; \ + \ + struct platform_device pfx ## _nand_device = { \ + .name = "mxc_nand", \ + .id = 0, \ + .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \ + .resource = pfx ## _nand_resources, \ + } -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; +#ifdef CONFIG_MACH_MX21 +DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC); +#endif + +#ifdef CONFIG_MACH_MX27 +DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC); +#endif /* * lcdc: @@ -275,12 +180,12 @@ struct platform_device mxc_nand_device = { */ static struct resource mxc_fb[] = { { - .start = LCDC_BASE_ADDR, - .end = LCDC_BASE_ADDR + 0xFFF, + .start = MX2x_LCDC_BASE_ADDR, + .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_LCDC, - .end = MXC_INT_LCDC, + .start = MX2x_INT_LCDC, + .end = MX2x_INT_LCDC, .flags = IORESOURCE_IRQ, } }; @@ -299,13 +204,13 @@ struct platform_device mxc_fb_device = { #ifdef CONFIG_MACH_MX27 static struct resource mxc_fec_resources[] = { { - .start = FEC_BASE_ADDR, - .end = FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, + .start = MX27_FEC_BASE_ADDR, + .end = MX27_FEC_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_FEC, - .end = MXC_INT_FEC, - .flags = IORESOURCE_IRQ, + .start = MX27_INT_FEC, + .end = MX27_INT_FEC, + .flags = IORESOURCE_IRQ, }, }; @@ -317,55 +222,41 @@ struct platform_device mxc_fec_device = { }; #endif -static struct resource mxc_i2c_1_resources[] = { - { - .start = I2C_BASE_ADDR, - .end = I2C_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C, - .end = MXC_INT_I2C, - .flags = IORESOURCE_IRQ, +#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \ + static struct resource mxc_i2c_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + } \ + }; \ + \ + struct platform_device mxc_i2c_device ## n = { \ + .name = "imx-i2c", \ + .id = n, \ + .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \ + .resource = mxc_i2c_resources ## n, \ } -}; -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), - .resource = mxc_i2c_1_resources, -}; +DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C); #ifdef CONFIG_MACH_MX27 -static struct resource mxc_i2c_2_resources[] = { - { - .start = I2C2_BASE_ADDR, - .end = I2C2_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C2, - .end = MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), - .resource = mxc_i2c_2_resources, -}; +DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2); #endif static struct resource mxc_pwm_resources[] = { { - .start = PWM_BASE_ADDR, - .end = PWM_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM, + .start = MX2x_PWM_BASE_ADDR, + .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_PWM, - .end = MXC_INT_PWM, - .flags = IORESOURCE_IRQ, + .start = MX2x_INT_PWM, + .end = MX2x_INT_PWM, + .flags = IORESOURCE_IRQ, } }; @@ -379,74 +270,49 @@ struct platform_device mxc_pwm_device = { /* * Resource definition for the MXC SDHC */ -static struct resource mxc_sdhc1_resources[] = { - { - .start = SDHC1_BASE_ADDR, - .end = SDHC1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SDHC1, - .end = MXC_INT_SDHC1, - .flags = IORESOURCE_IRQ, - }, { - .start = DMA_REQ_SDHC1, - .end = DMA_REQ_SDHC1, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 mxc_sdhc1_dmamask = 0xffffffffUL; - -struct platform_device mxc_sdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .dev = { - .dma_mask = &mxc_sdhc1_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), - .resource = mxc_sdhc1_resources, -}; - -static struct resource mxc_sdhc2_resources[] = { - { - .start = SDHC2_BASE_ADDR, - .end = SDHC2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SDHC2, - .end = MXC_INT_SDHC2, - .flags = IORESOURCE_IRQ, - }, { - .start = DMA_REQ_SDHC2, - .end = DMA_REQ_SDHC2, - .flags = IORESOURCE_DMA, - }, -}; +#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \ + static struct resource mxc_sdhc_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, { \ + .start = dmareq, \ + .end = dmareq, \ + .flags = IORESOURCE_DMA, \ + }, \ + }; \ + \ + static u64 mxc_sdhc ## n ## _dmamask = 0xffffffffUL; \ + \ + struct platform_device mxc_sdhc_device ## n = { \ + .name = "mxc-mmc", \ + .id = n, \ + .dev = { \ + .dma_mask = &mxc_sdhc ## n ## _dmamask, \ + .coherent_dma_mask = 0xffffffff, \ + }, \ + .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \ + .resource = mxc_sdhc_resources ## n, \ + } -static u64 mxc_sdhc2_dmamask = 0xffffffffUL; - -struct platform_device mxc_sdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .dev = { - .dma_mask = &mxc_sdhc2_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(mxc_sdhc2_resources), - .resource = mxc_sdhc2_resources, -}; +DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1); +DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2); #ifdef CONFIG_MACH_MX27 static struct resource otg_resources[] = { { - .start = OTG_BASE_ADDR, - .end = OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, + .start = MX27_USBOTG_BASE_ADDR, + .end = MX27_USBOTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USB3, - .end = MXC_INT_USB3, - .flags = IORESOURCE_IRQ, + .start = MX27_INT_USB3, + .end = MX27_INT_USB3, + .flags = IORESOURCE_IRQ, }, }; @@ -454,14 +320,14 @@ static u64 otg_dmamask = 0xffffffffUL; /* OTG gadget device */ struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = 0xffffffffUL, + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = 0xffffffffUL, }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), }; /* OTG host */ @@ -482,12 +348,12 @@ static u64 usbh1_dmamask = 0xffffffffUL; static struct resource mxc_usbh1_resources[] = { { - .start = OTG_BASE_ADDR + 0x200, - .end = OTG_BASE_ADDR + 0x3ff, + .start = MX27_USBOTG_BASE_ADDR + 0x200, + .end = MX27_USBOTG_BASE_ADDR + 0x3ff, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USB1, - .end = MXC_INT_USB1, + .start = MX27_INT_USB1, + .end = MX27_INT_USB1, .flags = IORESOURCE_IRQ, }, }; @@ -508,12 +374,12 @@ static u64 usbh2_dmamask = 0xffffffffUL; static struct resource mxc_usbh2_resources[] = { { - .start = OTG_BASE_ADDR + 0x400, - .end = OTG_BASE_ADDR + 0x5ff, + .start = MX27_USBOTG_BASE_ADDR + 0x400, + .end = MX27_USBOTG_BASE_ADDR + 0x5ff, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USB2, - .end = MXC_INT_USB2, + .start = MX27_INT_USB2, + .end = MX27_INT_USB2, .flags = IORESOURCE_IRQ, }, }; @@ -530,115 +396,88 @@ struct platform_device mxc_usbh2 = { }; #endif -static struct resource imx_ssi_resources0[] = { - { - .start = SSI1_BASE_ADDR, - .end = SSI1_BASE_ADDR + 0x6F, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SSI1, - .end = MXC_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, { - .name = "tx0", - .start = DMA_REQ_SSI1_TX0, - .end = DMA_REQ_SSI1_TX0, - .flags = IORESOURCE_DMA, - }, { - .name = "rx0", - .start = DMA_REQ_SSI1_RX0, - .end = DMA_REQ_SSI1_RX0, - .flags = IORESOURCE_DMA, - }, { - .name = "tx1", - .start = DMA_REQ_SSI1_TX1, - .end = DMA_REQ_SSI1_TX1, - .flags = IORESOURCE_DMA, - }, { - .name = "rx1", - .start = DMA_REQ_SSI1_RX1, - .end = DMA_REQ_SSI1_RX1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = SSI2_BASE_ADDR, - .end = SSI2_BASE_ADDR + 0x6F, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SSI2, - .end = MXC_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, { - .name = "tx0", - .start = DMA_REQ_SSI2_TX0, - .end = DMA_REQ_SSI2_TX0, - .flags = IORESOURCE_DMA, - }, { - .name = "rx0", - .start = DMA_REQ_SSI2_RX0, - .end = DMA_REQ_SSI2_RX0, - .flags = IORESOURCE_DMA, - }, { - .name = "tx1", - .start = DMA_REQ_SSI2_TX1, - .end = DMA_REQ_SSI2_TX1, - .flags = IORESOURCE_DMA, - }, { - .name = "rx1", - .start = DMA_REQ_SSI2_RX1, - .end = DMA_REQ_SSI2_RX1, - .flags = IORESOURCE_DMA, - }, -}; +#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \ + { \ + .name = _name, \ + .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ + .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ + .flags = IORESOURCE_DMA, \ + } -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; +#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \ + static struct resource imx_ssi_resources ## n[] = { \ + { \ + .start = MX2x_SSI ## ssin ## _BASE_ADDR, \ + .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = MX2x_INT_SSI1, \ + .end = MX2x_INT_SSI1, \ + .flags = IORESOURCE_IRQ, \ + }, \ + DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \ + DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \ + DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \ + DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \ + }; \ + \ + struct platform_device imx_ssi_device ## n = { \ + .name = "imx-ssi", \ + .id = n, \ + .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \ + .resource = imx_ssi_resources ## n, \ + } -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; +DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); +DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); /* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .irq = MXC_INT_GPIO, - .base = IO_ADDRESS(GPIO_BASE_ADDR), - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100), - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200), - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300), - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - }, { - .chip.label = "gpio-4", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400), - .virtual_irq_start = MXC_GPIO_IRQ_START + 128, - }, { - .chip.label = "gpio-5", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500), - .virtual_irq_start = MXC_GPIO_IRQ_START + 160, +#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ + { \ + .chip.label = "gpio-" #n, \ + .irq = _irq, \ + .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ + n * 0x100), \ + .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ } -}; + +#define DEFINE_MXC_GPIO_PORT(SOC, n) \ + { \ + .chip.label = "gpio-" #n, \ + .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ + n * 0x100), \ + .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ + } + +#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \ + static struct mxc_gpio_port pfx ## _gpio_ports[] = { \ + DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \ + DEFINE_MXC_GPIO_PORT(SOC, 1), \ + DEFINE_MXC_GPIO_PORT(SOC, 2), \ + DEFINE_MXC_GPIO_PORT(SOC, 3), \ + DEFINE_MXC_GPIO_PORT(SOC, 4), \ + DEFINE_MXC_GPIO_PORT(SOC, 5), \ + } + +#ifdef CONFIG_MACH_MX21 +DEFINE_MXC_GPIO_PORTS(MX21, imx21); +#endif + +#ifdef CONFIG_MACH_MX27 +DEFINE_MXC_GPIO_PORTS(MX27, imx27); +#endif int __init mxc_register_gpios(void) { - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); + else +#endif + return 0; } diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index 97306aa18f1..f15df2aaae4 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -1,8 +1,10 @@ extern struct platform_device mxc_gpt1; extern struct platform_device mxc_gpt2; +#ifdef CONFIG_MACH_MX27 extern struct platform_device mxc_gpt3; extern struct platform_device mxc_gpt4; extern struct platform_device mxc_gpt5; +#endif extern struct platform_device mxc_wdt; extern struct platform_device mxc_uart_device0; extern struct platform_device mxc_uart_device1; @@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3; extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_uart_device5; extern struct platform_device mxc_w1_master_device; -extern struct platform_device mxc_nand_device; +#ifdef CONFIG_MACH_MX21 +extern struct platform_device imx21_nand_device; +#endif +#ifdef CONFIG_MACH_MX27 +extern struct platform_device imx27_nand_device; +#endif extern struct platform_device mxc_fb_device; extern struct platform_device mxc_fec_device; extern struct platform_device mxc_pwm_device; extern struct platform_device mxc_i2c_device0; +#ifdef CONFIG_MACH_MX27 extern struct platform_device mxc_i2c_device1; +#endif extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; extern struct platform_device mxc_otg_udc_device; @@ -25,6 +34,8 @@ extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_spi_device0; extern struct platform_device mxc_spi_device1; +#ifdef CONFIG_MACH_MX27 extern struct platform_device mxc_spi_device2; +#endif extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c index 7382b6d27ee..f3b169d5245 100644 --- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c @@ -28,7 +28,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c index 7b187606682..1f616dcaabc 100644 --- a/arch/arm/mach-mx2/eukrea_cpuimx27.c +++ b/arch/arm/mach-mx2/mach-cpuimx27.c @@ -36,7 +36,7 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/i2c.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> @@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) static struct plat_serial8250_port serial_platform_data[] = { { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), .irq = IRQ_GPIOB(23), .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), .irq = IRQ_GPIOB(22), .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), .irq = IRQ_GPIOB(27), .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), .irq = IRQ_GPIOB(30), .uartclk = 14745600, .regshift = 1, @@ -189,7 +189,8 @@ static void __init eukrea_cpuimx27_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info); + mxc_register_device(&imx27_nand_device, + &eukrea_cpuimx27_nand_board_info); i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); @@ -224,9 +225,9 @@ static struct sys_timer eukrea_cpuimx27_timer = { }; MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = eukrea_cpuimx27_init, diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c index 82ea227ea0c..b5710bf18b9 100644 --- a/arch/arm/mach-mx2/mx27lite.c +++ b/arch/arm/mach-mx2/mach-imx27lite.c @@ -27,7 +27,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/board-mx27lite.h> #include "devices.h" @@ -85,9 +85,9 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = mx27lite_init, diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c index cf5f77cbc2f..113e58d7cb4 100644 --- a/arch/arm/mach-mx2/mx21ads.c +++ b/arch/arm/mach-mx2/mach-mx21ads.c @@ -30,7 +30,7 @@ #include <asm/mach/map.h> #include <mach/imx-uart.h> #include <mach/imxfb.h> -#include <mach/iomux.h> +#include <mach/iomux-mx21.h> #include <mach/mxc_nand.h> #include <mach/mmc.h> #include <mach/board-mx21ads.h> @@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = { }; static struct resource mx21ads_flash_resource = { - .start = CS0_BASE_ADDR, - .end = CS0_BASE_ADDR + 0x02000000 - 1, + .start = MX21_CS0_BASE_ADDR, + .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1, .flags = IORESOURCE_MEM, }; @@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = { */ { .virtual = MX21ADS_MMIO_BASE_ADDR, - .pfn = __phys_to_pfn(CS1_BASE_ADDR), + .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), .length = MX21ADS_MMIO_SIZE, .type = MT_DEVICE, }, @@ -268,7 +268,7 @@ static void __init mx21ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata); mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); - mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info); + mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -284,9 +284,9 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX21_AIPI_BASE_ADDR, + .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX21_PHYS_OFFSET + 0x100, .map_io = mx21ads_map_io, .init_irq = mx21_init_irq, .init_machine = mx21ads_board_init, diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mach-mx27_3ds.c index 6761d1b79e4..b2f4e0db3fb 100644 --- a/arch/arm/mach-mx2/mx27pdk.c +++ b/arch/arm/mach-mx2/mach-mx27_3ds.c @@ -26,7 +26,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/board-mx27pdk.h> #include "devices.h" @@ -85,9 +85,9 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = mx27pdk_init, diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c index 83e412b713e..6ce323669e5 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mach-mx27ads.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> #include <mach/gpio.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/board-mx27ads.h> #include <mach/mxc_nand.h> #include <mach/i2c.h> @@ -290,7 +290,7 @@ static void __init mx27ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); - mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info); + mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, @@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = { static struct map_desc mx27ads_io_desc[] __initdata = { { .virtual = PBC_BASE_ADDRESS, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR), .length = SZ_1M, .type = MT_DEVICE, }, @@ -334,9 +334,9 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27ads_map_io, .init_irq = mx27_init_irq, .init_machine = mx27ads_board_init, diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c index 8bcc1a5b882..bc385599267 100644 --- a/arch/arm/mach-mx2/mxt_td60.c +++ b/arch/arm/mach-mx2/mach-mxt_td60.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> #include <linux/gpio.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> #include <mach/i2c.h> #include <linux/i2c/pca953x.h> @@ -257,7 +257,7 @@ static void __init mxt_td60_board_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); + mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, ARRAY_SIZE(mxt_td60_i2c_devices)); @@ -284,9 +284,9 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = mxt_td60_board_init, diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/mach-pca100.c index aea3d340d2e..778fff23091 100644 --- a/arch/arm/mach-mx2/pca100.c +++ b/arch/arm/mach-mx2/mach-pca100.c @@ -25,25 +25,36 @@ #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> #include <linux/irq.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/i2c.h> #include <asm/mach/time.h> #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) #include <mach/spi.h> #endif #include <mach/imx-uart.h> +#include <mach/audmux.h> +#include <mach/ssi.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/mmc.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" +#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) +#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) + static int pca100_pins[] = { /* UART1 */ PE12_PF_UART1_TXD, @@ -92,6 +103,34 @@ static int pca100_pins[] = { PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, + /* OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PC9_PF_USBOTG_DATA0, + PC10_PF_USBOTG_DATA2, + PC11_PF_USBOTG_DATA1, + PC12_PF_USBOTG_DATA4, + PC13_PF_USBOTG_DATA3, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PE2_PF_USBOTG_DIR, + PE24_PF_USBOTG_CLK, + PE25_PF_USBOTG_DATA7, + /* USBH2 */ + USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, }; static struct imxuart_platform_data uart_pdata = { @@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = { }; #endif +static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) +{ + mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); + gpio_set_value(GPIO_PORTC + 20, 1); + udelay(2); + gpio_set_value(GPIO_PORTC + 20, 0); + mxc_gpio_mode(PC20_PF_SSI1_FS); + msleep(2); +} + +static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) +{ + mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */ + gpio_set_value(GPIO_PORTC + 20, 0); + mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */ + gpio_set_value(GPIO_PORTC + 22, 0); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */ + gpio_set_value(GPIO_PORTC + 28, 0); + udelay(10); + gpio_set_value(GPIO_PORTC + 28, 1); + mxc_gpio_mode(PC20_PF_SSI1_FS); + mxc_gpio_mode(PC22_PF_SSI1_TXD); + msleep(2); +} + +static struct imx_ssi_platform_data pca100_ssi_pdata = { + .ac97_reset = pca100_ac97_cold_reset, + .ac97_warm_reset = pca100_ac97_warm_reset, + .flags = IMX_SSI_USE_AC97, +}; + static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { @@ -182,21 +252,79 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pca100_sdhc2_exit, }; +static int otg_phy_init(struct platform_device *pdev) +{ + gpio_set_value(OTG_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data otg_pdata = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static int usbh2_phy_init(struct platform_device *pdev) +{ + gpio_set_value(USBH2_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_phy_init, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static int otg_mode_host; + +static int __init pca100_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", pca100_otg_mode); + static void __init pca100_init(void) { int ret; + /* SSI unit */ + mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, + MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V1_PCR_TFCSEL(3) | + MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ + MXC_AUDMUX_V1_PCR_RXDSEL(3)); + mxc_audmux_v1_configure_port(3, + MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V1_PCR_TFCSEL(0) | + MXC_AUDMUX_V1_PCR_TFSDIR | + MXC_AUDMUX_V1_PCR_RXDSEL(0)); + ret = mxc_gpio_setup_multiple_pins(pca100_pins, ARRAY_SIZE(pca100_pins), "PCA100"); if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); + mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); + mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); - mxc_register_device(&mxc_nand_device, &pca100_nand_board_info); + mxc_register_device(&imx27_nand_device, &pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pca100_i2c_devices, @@ -220,6 +348,29 @@ static void __init pca100_init(void) mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); #endif + gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); + gpio_direction_output(OTG_PHY_CS_GPIO, 1); + gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); + gpio_direction_output(USBH2_PHY_CS_GPIO, 1); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif + if (!otg_mode_host) { + gpio_set_value(OTG_PHY_CS_GPIO, 0); + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + } + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -233,9 +384,9 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = pca100_init, diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c index 906d59b0a7a..035fbe046ec 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/mach-pcm038.c @@ -36,10 +36,12 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/i2c.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> #include <mach/spi.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" @@ -96,6 +98,19 @@ static int pcm038_pins[] = { PC17_PF_SSI4_RXD, PC18_PF_SSI4_TXD, PC19_PF_SSI4_CLK, + /* USB host */ + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, }; /* @@ -108,8 +123,8 @@ static struct platdata_mtd_ram pcm038_sram_data = { }; static struct resource pcm038_sram_resource = { - .start = CS1_BASE_ADDR, - .end = CS1_BASE_ADDR + 512 * 1024 - 1, + .start = MX27_CS1_BASE_ADDR, + .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1, .flags = IORESOURCE_MEM, }; @@ -173,9 +188,7 @@ static struct platform_device *platform_devices[] __initdata = { * setup other stuffs to access the sram. */ static void __init pcm038_init_sram(void) { - __raw_writel(0x0000d843, CSCR_U(1)); - __raw_writel(0x22252521, CSCR_L(1)); - __raw_writel(0x22220a00, CSCR_A(1)); + mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); } static struct imxi2c_platform_data pcm038_i2c_1_data = { @@ -279,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = { } }; +static struct mxc_usbh_platform_data usbh2_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; + static void __init pcm038_init(void) { mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), @@ -291,7 +309,7 @@ static void __init pcm038_init(void) mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); mxc_gpio_mode(PE16_AF_OWIRE); - mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); + mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, @@ -311,6 +329,8 @@ static void __init pcm038_init(void) spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD @@ -328,9 +348,9 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = pcm038_init, diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-mx2/mm-imx21.c new file mode 100644 index 00000000000..64134314d01 --- /dev/null +++ b/arch/arm/mach-mx2/mm-imx21.c @@ -0,0 +1,83 @@ +/* + * arch/arm/mach-mx2/mm-imx21.c + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <asm/pgtable.h> +#include <asm/mach/map.h> + +/* MX21 memory map definition */ +static struct map_desc imx21_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + { + .virtual = MX21_AIPI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR), + .length = MX21_AIPI_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + { + .virtual = MX21_SAHB1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR), + .length = MX21_SAHB1_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - EMI + */ + { + .virtual = MX21_X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR), + .length = MX21_X_MEMC_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +void __init mx21_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX21); + mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); + + iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); +} + +void __init mx21_init_irq(void) +{ + mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); +} diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx27.c index ae8f759134d..3366ed44cfd 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/mm-imx27.c @@ -1,5 +1,5 @@ /* - * generic.c + * arch/arm/mach-mx2/mm-imx27.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * @@ -26,7 +26,7 @@ #include <asm/mach/map.h> /* MX27 memory map definition */ -static struct map_desc mxc_io_desc[] __initdata = { +static struct map_desc imx27_io_desc[] __initdata = { /* * this fixed mapping covers: * - AIPI1 @@ -36,9 +36,9 @@ static struct map_desc mxc_io_desc[] __initdata = { * - and some reserved space */ { - .virtual = AIPI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPI_BASE_ADDR), - .length = AIPI_SIZE, + .virtual = MX27_AIPI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR), + .length = MX27_AIPI_SIZE, .type = MT_DEVICE }, /* @@ -47,9 +47,9 @@ static struct map_desc mxc_io_desc[] __initdata = { * - ATA */ { - .virtual = SAHB1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SAHB1_BASE_ADDR), - .length = SAHB1_SIZE, + .virtual = MX27_SAHB1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR), + .length = MX27_SAHB1_SIZE, .type = MT_DEVICE }, /* @@ -57,11 +57,11 @@ static struct map_desc mxc_io_desc[] __initdata = { * - EMI */ { - .virtual = X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), - .length = X_MEMC_SIZE, + .virtual = MX27_X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR), + .length = MX27_X_MEMC_SIZE, .type = MT_DEVICE - } + }, }; /* @@ -69,29 +69,15 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual * memory map for the IO modules. */ -void __init mx21_map_io(void) -{ - mxc_set_cpu_type(MXC_CPU_MX21); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); - - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); -} - void __init mx27_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX27); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); + mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); } void __init mx27_init_irq(void) { - mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); + mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); } - -void __init mx21_init_irq(void) -{ - mx27_init_irq(); -} - diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index 3cb7f457e5d..4aafd5b8b85 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -24,7 +24,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/mmc.h> @@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = { static struct resource pcm970_sja1000_resources[] = { { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 0x100 - 1, + .start = MX27_CS4_BASE_ADDR, + .end = MX27_CS4_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { .start = IRQ_GPIOE(19), diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c index 40a485cdc10..1c0c835b225 100644 --- a/arch/arm/mach-mx2/serial.c +++ b/arch/arm/mach-mx2/serial.c @@ -26,12 +26,12 @@ static struct resource uart0[] = { { - .start = UART1_BASE_ADDR, - .end = UART1_BASE_ADDR + 0x0B5, + .start = MX2x_UART1_BASE_ADDR, + .end = MX2x_UART1_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART1, - .end = MXC_INT_UART1, + .start = MX2x_INT_UART1, + .end = MX2x_INT_UART1, .flags = IORESOURCE_IRQ, }, }; @@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = { static struct resource uart1[] = { { - .start = UART2_BASE_ADDR, - .end = UART2_BASE_ADDR + 0x0B5, + .start = MX2x_UART2_BASE_ADDR, + .end = MX2x_UART2_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART2, - .end = MXC_INT_UART2, + .start = MX2x_INT_UART2, + .end = MX2x_INT_UART2, .flags = IORESOURCE_IRQ, }, }; @@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = { static struct resource uart2[] = { { - .start = UART3_BASE_ADDR, - .end = UART3_BASE_ADDR + 0x0B5, + .start = MX2x_UART3_BASE_ADDR, + .end = MX2x_UART3_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART3, - .end = MXC_INT_UART3, + .start = MX2x_INT_UART3, + .end = MX2x_INT_UART3, .flags = IORESOURCE_IRQ, }, }; @@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = { static struct resource uart3[] = { { - .start = UART4_BASE_ADDR, - .end = UART4_BASE_ADDR + 0x0B5, + .start = MX2x_UART4_BASE_ADDR, + .end = MX2x_UART4_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART4, - .end = MXC_INT_UART4, + .start = MX2x_INT_UART4, + .end = MX2x_INT_UART4, .flags = IORESOURCE_IRQ, }, }; @@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = { #ifdef CONFIG_MACH_MX27 static struct resource uart4[] = { { - .start = UART5_BASE_ADDR, - .end = UART5_BASE_ADDR + 0x0B5, + .start = MX27_UART5_BASE_ADDR, + .end = MX27_UART5_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART5, - .end = MXC_INT_UART5, + .start = MX27_INT_UART5, + .end = MX27_INT_UART5, .flags = IORESOURCE_IRQ, }, }; @@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = { static struct resource uart5[] = { { - .start = UART6_BASE_ADDR, - .end = UART6_BASE_ADDR + 0x0B5, + .start = MX27_UART6_BASE_ADDR, + .end = MX27_UART6_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART6, - .end = MXC_INT_UART6, + .start = MX27_INT_UART6, + .end = MX27_INT_UART6, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index cc28f56eae8..54d217314ee 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -3,7 +3,6 @@ if ARCH_MX25 comment "MX25 platforms:" config MACH_MX25_3DS - select ARCH_MXC_IOMUX_V3 bool "Support MX25PDK (3DS) Platform" endif diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile index fe23836a9f3..10cebc5ced8 100644 --- a/arch/arm/mach-mx25/Makefile +++ b/arch/arm/mach-mx25/Makefile @@ -1,3 +1,3 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX25) += clock.o -obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o +obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 6acc88bcdc4..56bf958d8c3 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -124,6 +124,11 @@ static unsigned long get_rate_gpt(struct clk *clk) return get_rate_per(5); } +static unsigned long get_rate_lcdc(struct clk *clk) +{ + return get_rate_per(7); +} + static unsigned long get_rate_otg(struct clk *clk) { return 48000000; /* FIXME */ @@ -167,6 +172,8 @@ DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); +DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); +DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); @@ -182,6 +189,8 @@ DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk); +DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -214,6 +223,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) }; int __init mx25_clocks_init(void) @@ -231,6 +242,9 @@ int __init mx25_clocks_init(void) __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1); __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2); + /* Clock source for lcdc is upll */ + __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 9fdeea1c083..3f4b8a0b5fa 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -438,3 +438,65 @@ struct platform_device mx25_fec_device = { .num_resources = ARRAY_SIZE(mx25_fec_resources), .resource = mx25_fec_resources, }; + +static struct resource mxc_nand_resources[] = { + { + .start = MX25_NFC_BASE_ADDR, + .end = MX25_NFC_BASE_ADDR + 0x1fff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_NANDFC, + .end = MX25_INT_NANDFC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_nand_device = { + .name = "mxc_nand", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_nand_resources), + .resource = mxc_nand_resources, +}; + +static struct resource mx25_rtc_resources[] = { + { + .start = MX25_DRYICE_BASE_ADDR, + .end = MX25_DRYICE_BASE_ADDR + 0x40, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_DRYICE, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mx25_rtc_device = { + .name = "imxdi_rtc", + .id = 0, + .num_resources = ARRAY_SIZE(mx25_rtc_resources), + .resource = mx25_rtc_resources, +}; + +static struct resource mx25_fb_resources[] = { + { + .start = MX25_LCDC_BASE_ADDR, + .end = MX25_LCDC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_LCDC, + .end = MX25_INT_LCDC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx25_fb_device = { + .name = "imx-fb", + .id = 0, + .resource = mx25_fb_resources, + .num_resources = ARRAY_SIZE(mx25_fb_resources), + .dev = { + .coherent_dma_mask = 0xFFFFFFFF, + }, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index fe5420fcd11..39560e13bc0 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -18,3 +18,6 @@ extern struct platform_device mxc_i2c_device0; extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; extern struct platform_device mx25_fec_device; +extern struct platform_device mxc_nand_device; +extern struct platform_device mx25_rtc_device; +extern struct platform_device mx25_fb_device; diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c index 6f06089246e..83d74109e7d 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mach-mx25pdk.c @@ -35,8 +35,9 @@ #include <mach/imx-uart.h> #include <mach/mx25.h> #include <mach/mxc_nand.h> +#include <mach/imxfb.h> #include "devices.h" -#include <mach/iomux.h> +#include <mach/iomux-mx25.h> static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, @@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = { MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ + + /* LCD */ + MX25_PAD_LD0__LD0, + MX25_PAD_LD1__LD1, + MX25_PAD_LD2__LD2, + MX25_PAD_LD3__LD3, + MX25_PAD_LD4__LD4, + MX25_PAD_LD5__LD5, + MX25_PAD_LD6__LD6, + MX25_PAD_LD7__LD7, + MX25_PAD_LD8__LD8, + MX25_PAD_LD9__LD9, + MX25_PAD_LD10__LD10, + MX25_PAD_LD11__LD11, + MX25_PAD_LD12__LD12, + MX25_PAD_LD13__LD13, + MX25_PAD_LD14__LD14, + MX25_PAD_LD15__LD15, + MX25_PAD_GPIO_E__LD16, + MX25_PAD_GPIO_F__LD17, + MX25_PAD_HSYNC__HSYNC, + MX25_PAD_VSYNC__VSYNC, + MX25_PAD_LSCLK__LSCLK, + MX25_PAD_OE_ACD__OE_ACD, + MX25_PAD_CONTRAST__CONTRAST, }; static struct fec_platform_data mx25_fec_pdata = { @@ -77,6 +103,40 @@ static void __init mx25pdk_fec_reset(void) gpio_set_value(FEC_RESET_B_GPIO, 1); } +static struct mxc_nand_platform_data mx25pdk_nand_board_info = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static struct imx_fb_videomode mx25pdk_modes[] = { + { + .mode = { + .name = "CRT-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39683, + .left_margin = 45, + .right_margin = 114, + .upper_margin = 33, + .lower_margin = 11, + .hsync_len = 1, + .vsync_len = 1, + }, + .bpp = 16, + .pcr = 0xFA208B80, + }, +}; + +static struct imx_fb_platform_data mx25pdk_fb_pdata = { + .mode = mx25pdk_modes, + .num_modes = ARRAY_SIZE(mx25pdk_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + static void __init mx25pdk_init(void) { mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, @@ -84,6 +144,9 @@ static void __init mx25pdk_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); + mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info); + mxc_register_device(&mx25_rtc_device, NULL); + mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata); mx25pdk_fec_reset(); mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); @@ -102,7 +165,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .phys_io = MX25_AIPS1_BASE_ADDR, .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, .init_irq = mx25_init_irq, .init_machine = mx25pdk_init, diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 28294416b0a..3872af1cf2c 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. @@ -86,6 +87,7 @@ config MACH_QONG config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 + select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 93c7b296be6..5d650fda5d5 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -5,18 +5,22 @@ # Object file lists. obj-y := mm.o devices.o cpu.o -obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o +CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o -obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o -obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o -obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o -obj-$(CONFIG_MACH_PCM037) += pcm037.o -obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o -obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o -obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ - mx31moboard-marxbot.o -obj-$(CONFIG_MACH_QONG) += qong.o -obj-$(CONFIG_MACH_PCM043) += pcm043.o -obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o -obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o -obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o +obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o +obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o +obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o +obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o +CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ + mx31moboard-marxbot.o mx31moboard-smartbot.o +obj-$(CONFIG_MACH_QONG) += mach-qong.o +obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o +obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o +obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c index 27a318af0d2..d22a66f502a 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -618,14 +618,15 @@ int __init mx31_clocks_init(unsigned long fref) mx31_read_cpu_rev(); - if (mx31_revision() >= CHIP_REV_2_0) { + if (mx31_revision() >= MX31_CHIP_REV_2_0) { reg = __raw_readl(MXC_CCM_PMCR1); /* No PLL restart on DVFS switch; enable auto EMI handshake */ reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN; __raw_writel(reg, MXC_CCM_PMCR1); } - mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); + mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), + MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 7584b4c6c55..07d630ebc28 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/common.h> -#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) +#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR) #define CCM_CCMR 0x00 #define CCM_PDR0 0x04 @@ -504,7 +504,8 @@ int __init mx35_clocks_init() __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); __raw_writel(0, CCM_BASE + CCM_CGR3); - mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); + mxc_timer_init(&gpt_clk, + MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); return 0; } diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c index db828809c67..861afe0fe3a 100644 --- a/arch/arm/mach-mx3/cpu.c +++ b/arch/arm/mach-mx3/cpu.c @@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV); + srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV)); for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) if (srev == mx31_cpu_type[i].srev) { diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h index adfa3627ad8..37a8a07beda 100644 --- a/arch/arm/mach-mx3/crm_regs.h +++ b/arch/arm/mach-mx3/crm_regs.h @@ -24,7 +24,7 @@ #define CKIH_CLK_FREQ_27MHZ 27000000 #define CKIL_CLK_FREQ 32768 -#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) +#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) /* Register addresses */ #define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c index c66ccbcdc11..a1d7fa5123d 100644 --- a/arch/arm/mach-mx3/iomux.c +++ b/arch/arm/mach-mx3/iomux-imx31.c @@ -29,7 +29,7 @@ /* * IOMUX register (base) addresses */ -#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) +#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR) #define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) #define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) #define IOMUXGPR (IOMUX_BASE + 0x008) diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 54aab401dbd..3d72b0b8970 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { static struct resource armadillo5x0_nor_flash_resource = { .flags = IORESOURCE_MEM, - .start = CS0_BASE_ADDR, - .end = CS0_BASE_ADDR + SZ_64M - 1, + .start = MX31_CS0_BASE_ADDR, + .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, }; static struct platform_device armadillo5x0_nor_flash = { @@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = { */ static struct resource armadillo5x0_smc911x_resources[] = { { - .start = CS3_BASE_ADDR, - .end = CS3_BASE_ADDR + SZ_32M - 1, + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), @@ -406,9 +406,9 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x00000100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .timer = &armadillo5x0_timer, diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index 6fa99ce3008..f085d5d1a6d 100644 --- a/arch/arm/mach-mx3/kzmarm11.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -46,13 +46,18 @@ #include "devices.h" +#define KZM_ARM11_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX31_CS4) ?: \ + IMX_IO_ADDRESS(x, MX31_CS5) ?: \ + MX31_IO_ADDRESS(x)) + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) /* * KZM-ARM11-01 has an external UART on FPGA */ static struct plat_serial8250_port serial_platform_data[] = { { - .membase = IO_ADDRESS(KZM_ARM11_16550), + .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), .mapbase = KZM_ARM11_16550, .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), .irqflags = IRQ_TYPE_EDGE_RISING, @@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void) /* * Unmask UART interrupt */ - tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1)); + tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); tmp |= 0x2; - __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1)); + __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); return platform_device_register(&serial_device); } @@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = { static struct resource kzm_smsc9118_resources[] = { { - .start = CS5_BASE_ADDR, - .end = CS5_BASE_ADDR + SZ_128K - 1, + .start = MX31_CS5_BASE_ADDR, + .end = MX31_CS5_BASE_ADDR + SZ_128K - 1, .flags = IORESOURCE_MEM, }, { @@ -222,15 +227,15 @@ static void __init kzm_board_init(void) */ static struct map_desc kzm_io_desc[] __initdata = { { - .virtual = CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), - .length = CS4_SIZE, + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, .type = MT_DEVICE }, { - .virtual = CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS5_BASE_ADDR), - .length = CS5_SIZE, + .virtual = MX31_CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), + .length = MX31_CS5_SIZE, .type = MT_DEVICE }, }; @@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = { * initialize __mach_desc_KZM_ARM11_01 data structure. */ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = kzm_map_io, .init_irq = mx31_init_irq, .init_machine = kzm_board_init, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 18715f1aa7e..b88c18ad769 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void) */ static struct map_desc mx31pdk_io_desc[] __initdata = { { - .virtual = CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS5_BASE_ADDR), - .length = CS5_SIZE, + .virtual = MX31_CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), + .length = MX31_CS5_SIZE, .type = MT_DEVICE, }, }; @@ -256,9 +256,9 @@ static struct sys_timer mx31pdk_timer = { */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31pdk_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 938c549767d..b3d1a1895c2 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -60,7 +60,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), - .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA), + .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), .irq = EXPIO_INT_XUART_INTA, .uartclk = 14745600, .regshift = 0, @@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, }, { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), - .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB), + .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), .irq = EXPIO_INT_XUART_INTB, .uartclk = 14745600, .regshift = 0, @@ -309,12 +309,8 @@ static struct regulator_init_data ldo1_data = { }; static struct regulator_consumer_supply ldo2_consumers[] = { - { - .supply = "AVDD", - }, - { - .supply = "HPVDD", - }, + { .supply = "AVDD", .dev_name = "1-001a" }, + { .supply = "HPVDD", .dev_name = "1-001a" }, }; /* CODEC and SIM */ @@ -385,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = { static int mx31_wm8350_init(struct wm8350 *wm8350) { - int i; - wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN, WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW, WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF, @@ -422,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, WM8350_GPIO_DEBOUNCE_OFF); - /* Fix up for our own supplies. */ - for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++) - ldo2_consumers[i].dev = wm8350->dev; - wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data); wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data); wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data); @@ -493,14 +483,27 @@ static void mxc_init_i2c(void) } #endif +static unsigned int ssi_pins[] = { + MX31_PIN_SFS5__SFS5, + MX31_PIN_SCK5__SCK5, + MX31_PIN_SRXD5__SRXD5, + MX31_PIN_STXD5__STXD5, +}; + +static void mxc_init_audio(void) +{ + mxc_register_device(&imx_ssi_device0, NULL); + mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); +} + /*! * This structure defines static mappings for the i.MX31ADS board. */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), - .length = CS4_SIZE / 2, + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE / 2, .type = MT_DEVICE }, }; @@ -528,6 +531,7 @@ static void __init mxc_board_init(void) mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); + mxc_init_audio(); } static void __init mx31ads_timer_init(void) @@ -545,9 +549,9 @@ static struct sys_timer mx31ads_timer = { */ MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31ads_map_io, .init_irq = mx31ads_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 9ce029f554b..80847b04c06 100644 --- a/arch/arm/mach-mx3/mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -57,8 +57,8 @@ static struct resource smsc91x_resources[] = { { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 0xffff, + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0xffff, .flags = IORESOURCE_MEM, }, { @@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mx31lilly_board_init, diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 789b20d1730..2b6d1140087 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = { static struct resource smsc911x_resources[] = { { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 0x100, + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0x100, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), @@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), - .length = CS4_SIZE, + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, .type = MT_DEVICE } }; @@ -287,9 +287,9 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31lite_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index cfd605d078e..a7dc5191bf5 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -96,9 +96,6 @@ static unsigned int moboard_pins[] = { /* LEDs */ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, - /* SEL */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, /* SPI1 */ MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO, MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, @@ -352,9 +349,7 @@ static struct fsl_usb2_platform_data usb_pdata = { static int moboard_usbh2_hw_init(struct platform_device *pdev) { - int ret = gpio_request(USBH2_EN_B, "usbh2-en"); - if (ret) - return ret; + int ret; mxc_iomux_set_gpr(MUX_PGP_UH2, true); @@ -371,6 +366,9 @@ static int moboard_usbh2_hw_init(struct platform_device *pdev) mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + ret = gpio_request(USBH2_EN_B, "usbh2-en"); + if (ret) + return ret; gpio_direction_output(USBH2_EN_B, 0); return 0; @@ -431,34 +429,6 @@ static struct platform_device mx31moboard_leds_device = { }, }; -#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void mx31moboard_init_sel_gpios(void) -{ - if (!gpio_request(SEL0, "sel0")) { - gpio_direction_input(SEL0); - gpio_export(SEL0, true); - } - - if (!gpio_request(SEL1, "sel1")) { - gpio_direction_input(SEL1); - gpio_export(SEL1, true); - } - - if (!gpio_request(SEL2, "sel2")) { - gpio_direction_input(SEL2); - gpio_export(SEL2, true); - } - - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); - } -} - static struct ipu_platform_data mx3_ipu_data = { .irq_base = MXC_IPU_IRQ_START, }; @@ -518,8 +488,6 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_uart_device4, &uart4_pdata); - mx31moboard_init_sel_gpios(); - mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); @@ -552,6 +520,9 @@ static void __init mxc_board_init(void) case MX31MARXBOT: mx31moboard_marxbot_init(); break; + case MX31SMARTBOT: + mx31moboard_smartbot_init(); + break; default: printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); @@ -569,9 +540,9 @@ struct sys_timer mx31moboard_timer = { MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c index 0bbc65ea23c..bcac84d4dca 100644 --- a/arch/arm/mach-mx3/mx35pdk.c +++ b/arch/arm/mach-mx3/mach-mx35pdk.c @@ -106,9 +106,9 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX35_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 5be396917c9..11f53155916 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -33,6 +33,9 @@ #include <linux/irq.h> #include <linux/fsl_devices.h> #include <linux/can/platform/sja1000.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <media/soc_camera.h> @@ -51,6 +54,8 @@ #include <mach/mx3_camera.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" #include "pcm037.h" @@ -172,19 +177,7 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSI_VSYNC__CSI_VSYNC, /* GPIO */ IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), -}; - -static struct physmap_flash_data pcm037_flash_data = { - .width = 2, -}; - -static struct resource pcm037_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static int usbotg_pins[] = { + /* OTG */ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, @@ -197,39 +190,29 @@ static int usbotg_pins[] = { MX31_PIN_USBOTG_DIR__USBOTG_DIR, MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), }; -/* USB OTG HS port */ -static int __init gpio_usbotg_hs_activate(void) -{ - int ret = mxc_iomux_setup_multiple_pins(usbotg_pins, - ARRAY_SIZE(usbotg_pins), "usbotg"); - - if (ret < 0) { - printk(KERN_ERR "Cannot set up OTG pins\n"); - return ret; - } - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - return 0; -} +static struct physmap_flash_data pcm037_flash_data = { + .width = 2, +}; -/* OTG config */ -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, +static struct resource pcm037_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, }; static struct platform_device pcm037_flash = { @@ -248,8 +231,8 @@ static struct imxuart_platform_data uart_pdata = { static struct resource smsc911x_resources[] = { { - .start = CS1_BASE_ADDR + 0x300, - .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1, + .start = MX31_CS1_BASE_ADDR + 0x300, + .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), @@ -281,8 +264,8 @@ static struct platdata_mtd_ram pcm038_sram_data = { }; static struct resource pcm038_sram_resource = { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 512 * 1024 - 1, + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1, .flags = IORESOURCE_MEM, }; @@ -536,8 +519,8 @@ static struct mx3fb_platform_data mx3fb_pdata = { static struct resource pcm970_sja1000_resources[] = { { - .start = CS5_BASE_ADDR, - .end = CS5_BASE_ADDR + 0x100 - 1, + .start = MX31_CS5_BASE_ADDR, + .end = MX31_CS5_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), @@ -561,16 +544,65 @@ static struct platform_device pcm970_sja1000 = { .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), }; +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static int otg_mode_host; + +static int __init pcm037_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", pcm037_otg_mode); + /* * Board specific initialization. */ static void __init mxc_board_init(void) { int ret; + u32 tmp; + + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), "pcm037"); +#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \ + | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ + mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ + mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ + mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ + mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ + mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ + mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ + if (pcm037_variant() == PCM037_EET) mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); @@ -608,8 +640,6 @@ static void __init mxc_board_init(void) mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); - if (!gpio_usbotg_hs_activate()) - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); /* CSI */ /* Camera power: default - off */ @@ -623,6 +653,23 @@ static void __init mxc_board_init(void) mxc_register_device(&mx3_camera, &camera_pdata); platform_device_register(&pcm970_sja1000); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + } static void __init pcm037_timer_init(void) @@ -636,9 +683,9 @@ struct sys_timer pcm037_timer = { MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index 8d386000fc4..8d386000fc4 100644 --- a/arch/arm/mach-mx3/pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index e3aa829be58..1bf1ec2eef5 100644 --- a/arch/arm/mach-mx3/pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -26,8 +26,12 @@ #include <linux/gpio.h> #include <linux/smc911x.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -44,6 +48,10 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> +#include <mach/audmux.h> +#include <mach/ssi.h> #include "devices.h" @@ -205,6 +213,94 @@ static struct pad_desc pcm043_pads[] = { MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, /* gpio */ MX35_PAD_ATA_CS0__GPIO2_6, + /* USB host */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, + /* SSI */ + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, + MX35_PAD_STXD4__AUDMUX_AUD4_TXD, + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, + MX35_PAD_SCK4__AUDMUX_AUD4_TXC, +}; + +#define AC97_GPIO_TXFS (1 * 32 + 31) +#define AC97_GPIO_TXD (1 * 32 + 28) +#define AC97_GPIO_RESET (1 * 32 + 0) + +static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) +{ + struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + int ret; + + ret = gpio_request(AC97_GPIO_TXFS, "SSI"); + if (ret) { + printk("failed to get GPIO_TXFS: %d\n", ret); + return; + } + + mxc_iomux_v3_setup_pad(&txfs_gpio); + + /* warm reset */ + gpio_direction_output(AC97_GPIO_TXFS, 1); + udelay(2); + gpio_set_value(AC97_GPIO_TXFS, 0); + + gpio_free(AC97_GPIO_TXFS); + mxc_iomux_v3_setup_pad(&txfs); +} + +static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) +{ + struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28; + struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; + struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; + int ret; + + ret = gpio_request(AC97_GPIO_TXFS, "SSI"); + if (ret) + goto err1; + + ret = gpio_request(AC97_GPIO_TXD, "SSI"); + if (ret) + goto err2; + + ret = gpio_request(AC97_GPIO_RESET, "SSI"); + if (ret) + goto err3; + + mxc_iomux_v3_setup_pad(&txfs_gpio); + mxc_iomux_v3_setup_pad(&txd_gpio); + mxc_iomux_v3_setup_pad(&reset_gpio); + + gpio_direction_output(AC97_GPIO_TXFS, 0); + gpio_direction_output(AC97_GPIO_TXD, 0); + + /* cold reset */ + gpio_direction_output(AC97_GPIO_RESET, 0); + udelay(10); + gpio_direction_output(AC97_GPIO_RESET, 1); + + mxc_iomux_v3_setup_pad(&txd); + mxc_iomux_v3_setup_pad(&txfs); + + gpio_free(AC97_GPIO_RESET); +err3: + gpio_free(AC97_GPIO_TXD); +err2: + gpio_free(AC97_GPIO_TXFS); +err1: + if (ret) + printk("%s failed with %d\n", __func__, ret); + mdelay(1); +} + +static struct imx_ssi_platform_data pcm043_ssi_pdata = { + .ac97_reset = pcm043_ac97_cold_reset, + .ac97_warm_reset = pcm043_ac97_warm_reset, + .flags = IMX_SSI_USE_AC97, }; static struct mxc_nand_platform_data pcm037_nand_board_info = { @@ -212,6 +308,37 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_UTMI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh1_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | + MXC_EHCI_IPPUE_DOWN, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, +}; + +static int otg_mode_host; + +static int __init pcm043_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", pcm043_otg_mode); + /* * Board specific initialization. */ @@ -219,10 +346,23 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + mxc_audmux_v2_configure_port(3, + MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V2_PTCR_TFSEL(0) | + MXC_AUDMUX_V2_PTCR_TFSDIR, + MXC_AUDMUX_V2_PDCR_RXDSEL(0)); + + mxc_audmux_v2_configure_port(0, + MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V2_PTCR_TCSEL(3) | + MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ + MXC_AUDMUX_V2_PDCR_RXDSEL(3)); + platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); mxc_register_device(&mxc_uart_device1, &uart_pdata); @@ -235,6 +375,20 @@ static void __init mxc_board_init(void) mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + mxc_register_device(&mxc_usbh1, &usbh1_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + } static void __init pcm043_timer_init(void) @@ -248,9 +402,9 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX35_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c index 044511f1b9a..e5b5b8323a1 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -43,7 +43,7 @@ #define QONG_FPGA_VERSION(major, minor, rev) \ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) -#define QONG_FPGA_BASEADDR CS1_BASE_ADDR +#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR #define QONG_FPGA_PERIPH_SIZE (1 << 24) #define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR @@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = { }; static struct resource qong_flash_resource = { - .start = CS0_BASE_ADDR, - .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1, + .start = MX31_CS0_BASE_ADDR, + .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1, .flags = IORESOURCE_MEM, }; @@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = { }; static struct resource qong_nand_resource = { - .start = CS3_BASE_ADDR, - .end = CS3_BASE_ADDR + SZ_32M - 1, + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }; @@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - __raw_writel(0x00004f00, CSCR_U(3)); - __raw_writel(0x20013b31, CSCR_L(3)); - __raw_writel(0x00020800, CSCR_A(3)); + mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ @@ -275,9 +273,9 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index 694611d6b05..ccd874225c3 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -67,6 +67,13 @@ static unsigned int litekit_db_board_pins[] __initdata = { MX31_PIN_CSPI1_SS0__SS0, MX31_PIN_CSPI1_SS1__SS1, MX31_PIN_CSPI1_SS2__SS2, + /* SDHC1 */ + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, }; /* UART */ @@ -79,11 +86,11 @@ static struct imxuart_platform_data uart_pdata __initdata = { static int gpio_det, gpio_wp; #define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + PAD_CTL_ODE_CMOS) static int mxc_mmc1_get_ro(struct device *dev) { - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6)); } static int mxc_mmc1_init(struct device *dev, @@ -94,12 +101,17 @@ static int mxc_mmc1_init(struct device *dev, gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1); gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_CMD, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); ret = gpio_request(gpio_det, "MMC detect"); if (ret) @@ -113,7 +125,7 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_wp); ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) goto exit_free_wp; @@ -133,7 +145,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) { gpio_free(gpio_det); gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); + free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data); } static struct imxmmc_platform_data mmc_pdata = { diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 438428eaf76..9fbad2eb3a4 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -49,6 +49,9 @@ static unsigned int devboard_pins[] = { MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; static struct imxuart_platform_data uart_pdata = { @@ -108,6 +111,33 @@ static struct imxmmc_platform_data sdhc2_pdata = { .exit = devboard_sdhc2_exit, }; +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void devboard_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -196,5 +226,7 @@ void __init mx31moboard_devboard_init(void) mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + devboard_init_sel_gpios(); + devboard_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 1f44b9ccbb0..3958515d75b 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -66,6 +66,9 @@ static unsigned int marxbot_pins[] = { MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) @@ -127,12 +130,12 @@ static struct imxmmc_platform_data sdhc2_pdata = { static void dspics_resets_init(void) { if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { - gpio_direction_output(TRSLAT_RST_B, 1); + gpio_direction_output(TRSLAT_RST_B, 0); gpio_export(TRSLAT_RST_B, false); } if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { - gpio_direction_output(DSPICS_RST_B, 1); + gpio_direction_output(DSPICS_RST_B, 0); gpio_export(DSPICS_RST_B, false); } } @@ -200,7 +203,7 @@ static int __init marxbot_cam_init(void) int ret = gpio_request(CAM_CHOICE, "cam-choice"); if (ret) return ret; - gpio_direction_output(CAM_CHOICE, 1); + gpio_direction_output(CAM_CHOICE, 0); ret = gpio_request(BASECAM_RST_B, "basecam-reset"); if (ret) @@ -223,6 +226,34 @@ static int __init marxbot_cam_init(void) return 0; } +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void marxbot_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} + #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -307,6 +338,8 @@ void __init mx31moboard_marxbot_init(void) mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), "marxbot"); + marxbot_init_sel_gpios(); + dspics_resets_init(); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c new file mode 100644 index 00000000000..52a69fc8b14 --- /dev/null +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> + +#include <media/soc_camera.h> + +#include "devices.h" + +static unsigned int smartbot_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* CSI */ + MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, + MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, + /* ENABLES */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) +#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) + +static int smartbot_cam_power(struct device *dev, int on) +{ + gpio_set_value(CAM_POWER, !on); + return 0; +} + +static int smartbot_cam_reset(struct device *dev) +{ + gpio_set_value(CAM_RST_B, 0); + udelay(100); + gpio_set_value(CAM_RST_B, 1); + return 0; +} + +static struct i2c_board_info smartbot_i2c_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link base_iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = smartbot_cam_power, + .reset = smartbot_cam_reset, + .board_info = &smartbot_i2c_devices[0], + .i2c_adapter_id = 0, + .module_name = "mt9t031", +}; + +static struct platform_device smartbot_camera[] = { + { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &base_iclink, + }, + }, +}; + +static struct platform_device *smartbot_cameras[] __initdata = { + &smartbot_camera[0], +}; + +static int __init smartbot_cam_init(void) +{ + int ret = gpio_request(CAM_RST_B, "cam-reset"); + if (ret) + return ret; + gpio_direction_output(CAM_RST_B, 1); + ret = gpio_request(CAM_POWER, "cam-standby"); + if (ret) + return ret; + gpio_direction_output(CAM_POWER, 0); + + return 0; +} + +#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void smartbot_resets_init(void) +{ + if (!gpio_request(POWER_EN, "power-enable")) { + gpio_direction_output(POWER_EN, 0); + gpio_export(POWER_EN, false); + } + + if (!gpio_request(DSPIC_RST_B, "dspic-rst")) { + gpio_direction_output(DSPIC_RST_B, 0); + gpio_export(DSPIC_RST_B, false); + } + + if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { + gpio_direction_output(TRSLAT_RST_B, 0); + gpio_export(TRSLAT_RST_B, false); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_smartbot_init(void) +{ + printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), + "smartbot"); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + smartbot_resets_init(); + + smartbot_cam_init(); + platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras)); +} diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig new file mode 100644 index 00000000000..1576d51e676 --- /dev/null +++ b/arch/arm/mach-mx5/Kconfig @@ -0,0 +1,18 @@ +if ARCH_MX5 + +config ARCH_MX51 + bool + default y + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + +comment "MX5 platforms:" + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile new file mode 100644 index 00000000000..bf23f869ef5 --- /dev/null +++ b/arch/arm/mach-mx5/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. +obj-y := cpu.o mm.o clock-mx51.o devices.o + +obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o + diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot new file mode 100644 index 00000000000..9939a19d99a --- /dev/null +++ b/arch/arm/mach-mx5/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x90008000 +params_phys-y := 0x90000100 +initrd_phys-y := 0x90800000 diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c new file mode 100644 index 00000000000..ee67a71db80 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -0,0 +1,98 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx51.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices.h" + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +}; + +static struct pad_desc mx51babbage_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* UART2 */ + MX51_PAD_UART2_RXD__UART2_RXD, + MX51_PAD_UART2_TXD__UART2_TXD, + + /* UART3 */ + MX51_PAD_EIM_D25__UART3_RXD, + MX51_PAD_EIM_D26__UART3_TXD, + MX51_PAD_EIM_D27__UART3_RTS, + MX51_PAD_EIM_D24__UART3_CTS, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, + ARRAY_SIZE(mx51babbage_pads)); + mxc_init_imx_uart(); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx51_babbage_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mxc_timer = { + .init = mx51_babbage_timer_init, +}; + +MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") + /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c new file mode 100644 index 00000000000..be90c03101c --- /dev/null +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -0,0 +1,825 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/clkdev.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/clock.h> + +#include "crm_regs.h" + +/* External clock values passed-in by the board code */ +static unsigned long external_high_reference, external_low_reference; +static unsigned long oscillator_reference, ckih2_reference; + +static struct clk osc_clk; +static struct clk pll1_main_clk; +static struct clk pll1_sw_clk; +static struct clk pll2_sw_clk; +static struct clk pll3_sw_clk; +static struct clk lp_apm_clk; +static struct clk periph_apm_clk; +static struct clk ahb_clk; +static struct clk ipg_clk; + +#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ + +static int _clk_ccgr_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_ccgr_disable(struct clk *clk) +{ + u32 reg; + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + +} + +static void _clk_ccgr_disable_inwait(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); +} + +/* + * For the 4-to-1 muxed input clock + */ +static inline u32 _get_mux(struct clk *parent, struct clk *m0, + struct clk *m1, struct clk *m2, struct clk *m3) +{ + if (parent == m0) + return 0; + else if (parent == m1) + return 1; + else if (parent == m2) + return 2; + else if (parent == m3) + return 3; + else + BUG(); + + return -EINVAL; +} + +static inline void __iomem *_get_pll_base(struct clk *pll) +{ + if (pll == &pll1_main_clk) + return MX51_DPLL1_BASE; + else if (pll == &pll2_sw_clk) + return MX51_DPLL2_BASE; + else if (pll == &pll3_sw_clk) + return MX51_DPLL3_BASE; + else + BUG(); + + return NULL; +} + +static unsigned long clk_pll_get_rate(struct clk *clk) +{ + long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; + unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; + void __iomem *pllbase; + s64 temp; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + pllbase = _get_pll_base(clk); + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; + dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; + + if (pll_hfsm == 0) { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + } else { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); + } + pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; + mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; + mfi = (mfi <= 5) ? 5 : mfi; + mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; + mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK; + /* Sign extend to 32-bits */ + if (mfn >= 0x04000000) { + mfn |= 0xFC000000; + mfn_abs = -mfn; + } + + ref_clk = 2 * parent_rate; + if (dbl != 0) + ref_clk *= 2; + + ref_clk /= (pdf + 1); + temp = (u64) ref_clk * mfn_abs; + do_div(temp, mfd + 1); + if (mfn < 0) + temp = -temp; + temp = (ref_clk * mfi) + temp; + + return temp; +} + +static int _clk_pll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + void __iomem *pllbase; + + long mfi, pdf, mfn, mfd = 999999; + s64 temp64; + unsigned long quad_parent_rate; + unsigned long pll_hfsm, dp_ctl; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + pllbase = _get_pll_base(clk); + + quad_parent_rate = 4 * parent_rate; + pdf = mfi = -1; + while (++pdf < 16 && mfi < 5) + mfi = rate * (pdf+1) / quad_parent_rate; + if (mfi > 15) + return -EINVAL; + pdf--; + + temp64 = rate * (pdf+1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate/1000000); + mfn = (long)temp64; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + /* use dpdck0_2 */ + __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); + pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; + if (pll_hfsm == 0) { + reg = mfi << 4 | pdf; + __raw_writel(reg, pllbase + MXC_PLL_DP_OP); + __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); + } else { + reg = mfi << 4 | pdf; + __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); + __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); + __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); + } + + return 0; +} + +static int _clk_pll_enable(struct clk *clk) +{ + u32 reg; + void __iomem *pllbase; + int i = 0; + + pllbase = _get_pll_base(clk); + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); + + /* Wait for lock */ + do { + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_LRF) + break; + + udelay(1); + } while (++i < MAX_DPLL_WAIT_TRIES); + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("MX5: pll locking failed\n"); + return -EINVAL; + } + + return 0; +} + +static void _clk_pll_disable(struct clk *clk) +{ + u32 reg; + void __iomem *pllbase; + + pllbase = _get_pll_base(clk); + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN; + __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); +} + +static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, step; + + reg = __raw_readl(MXC_CCM_CCSR); + + /* When switching from pll_main_clk to a bypass clock, first select a + * multiplexed clock in 'step_sel', then shift the glitchless mux + * 'pll1_sw_clk_sel'. + * + * When switching back, do it in reverse order + */ + if (parent == &pll1_main_clk) { + /* Switch to pll1_main_clk */ + reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + __raw_writel(reg, MXC_CCM_CCSR); + /* step_clk mux switched to lp_apm, to save power. */ + reg = __raw_readl(MXC_CCM_CCSR); + reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK; + reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM << + MXC_CCM_CCSR_STEP_SEL_OFFSET); + } else { + if (parent == &lp_apm_clk) { + step = MXC_CCM_CCSR_STEP_SEL_LP_APM; + } else if (parent == &pll2_sw_clk) { + step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED; + } else if (parent == &pll3_sw_clk) { + step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED; + } else + return -EINVAL; + + reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK; + reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET); + + __raw_writel(reg, MXC_CCM_CCSR); + /* Switch to step_clk */ + reg = __raw_readl(MXC_CCM_CCSR); + reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + } + __raw_writel(reg, MXC_CCM_CCSR); + return 0; +} + +static unsigned long clk_pll1_sw_get_rate(struct clk *clk) +{ + u32 reg, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CCSR); + + if (clk->parent == &pll2_sw_clk) { + div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >> + MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1; + } else if (clk->parent == &pll3_sw_clk) { + div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >> + MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1; + } else + div = 1; + return parent_rate / div; +} + +static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCSR); + + if (parent == &pll2_sw_clk) + reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL; + else + reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL; + + __raw_writel(reg, MXC_CCM_CCSR); + return 0; +} + +static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + if (parent == &osc_clk) + reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CCSR); + + return 0; +} + +static unsigned long clk_arm_get_rate(struct clk *clk) +{ + u32 cacrr, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + cacrr = __raw_readl(MXC_CCM_CACRR); + div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1; + + return parent_rate / div; +} + +static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + int i = 0; + + mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL); + + reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CBCMR); + + /* Wait for lock */ + do { + reg = __raw_readl(MXC_CCM_CDHIPR); + if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY)) + break; + + udelay(1); + } while (++i < MAX_DPLL_WAIT_TRIES); + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("MX5: Set parent for periph_apm clock failed\n"); + return -EINVAL; + } + + return 0; +} + +static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CBCDR); + + if (parent == &pll2_sw_clk) + reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL; + else if (parent == &periph_apm_clk) + reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CBCDR); + + return 0; +} + +static struct clk main_bus_clk = { + .parent = &pll2_sw_clk, + .set_parent = _clk_main_bus_set_parent, +}; + +static unsigned long clk_ahb_get_rate(struct clk *clk) +{ + u32 reg, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >> + MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1; + return parent_rate / div; +} + + +static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + unsigned long parent_rate; + int i = 0; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + /* Wait for lock */ + do { + reg = __raw_readl(MXC_CCM_CDHIPR); + if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY)) + break; + + udelay(1); + } while (++i < MAX_DPLL_WAIT_TRIES); + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("MX5: clk_ahb_set_rate failed\n"); + return -EINVAL; + } + + return 0; +} + +static unsigned long _clk_ahb_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8) + div = 8; + else if (div == 0) + div++; + return parent_rate / div; +} + + +static int _clk_max_enable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_enable(clk); + + /* Handshake with MAX when LPM is entered. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); + + return 0; +} + +static void _clk_max_disable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_disable_inwait(clk); + + /* No Handshake with MAX when LPM is entered as its disabled. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); +} + +static unsigned long clk_ipg_get_rate(struct clk *clk) +{ + u32 reg, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >> + MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1; + + return parent_rate / div; +} + +static unsigned long clk_ipg_per_get_rate(struct clk *clk) +{ + u32 reg, prediv1, prediv2, podf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) { + /* the main_bus_clk is the one before the DVFS engine */ + reg = __raw_readl(MXC_CCM_CBCDR); + prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1; + prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1; + podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> + MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1; + return parent_rate / (prediv1 * prediv2 * podf); + } else if (clk->parent == &ipg_clk) + return parent_rate; + else + BUG(); +} + +static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CBCMR); + + reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL; + reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL; + + if (parent == &ipg_clk) + reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL; + else if (parent == &lp_apm_clk) + reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL; + else if (parent != &main_bus_clk) + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CBCMR); + + return 0; +} + +static unsigned long clk_uart_get_rate(struct clk *clk) +{ + u32 reg, prediv, podf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CSCDR1); + prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1; + + return parent_rate / (prediv * podf); +} + +static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static unsigned long get_high_reference_clock_rate(struct clk *clk) +{ + return external_high_reference; +} + +static unsigned long get_low_reference_clock_rate(struct clk *clk) +{ + return external_low_reference; +} + +static unsigned long get_oscillator_reference_clock_rate(struct clk *clk) +{ + return oscillator_reference; +} + +static unsigned long get_ckih2_reference_clock_rate(struct clk *clk) +{ + return ckih2_reference; +} + +/* External high frequency clock */ +static struct clk ckih_clk = { + .get_rate = get_high_reference_clock_rate, +}; + +static struct clk ckih2_clk = { + .get_rate = get_ckih2_reference_clock_rate, +}; + +static struct clk osc_clk = { + .get_rate = get_oscillator_reference_clock_rate, +}; + +/* External low frequency (32kHz) clock */ +static struct clk ckil_clk = { + .get_rate = get_low_reference_clock_rate, +}; + +static struct clk pll1_main_clk = { + .parent = &osc_clk, + .get_rate = clk_pll_get_rate, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + +/* Clock tree block diagram (WIP): + * CCM: Clock Controller Module + * + * PLL output -> | + * | CCM Switcher -> CCM_CLK_ROOT_GEN -> + * PLL bypass -> | + * + */ + +/* PLL1 SW supplies to ARM core */ +static struct clk pll1_sw_clk = { + .parent = &pll1_main_clk, + .set_parent = _clk_pll1_sw_set_parent, + .get_rate = clk_pll1_sw_get_rate, +}; + +/* PLL2 SW supplies to AXI/AHB/IP buses */ +static struct clk pll2_sw_clk = { + .parent = &osc_clk, + .get_rate = clk_pll_get_rate, + .set_rate = _clk_pll_set_rate, + .set_parent = _clk_pll2_sw_set_parent, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + +/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */ +static struct clk pll3_sw_clk = { + .parent = &osc_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = clk_pll_get_rate, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + +/* Low-power Audio Playback Mode clock */ +static struct clk lp_apm_clk = { + .parent = &osc_clk, + .set_parent = _clk_lp_apm_set_parent, +}; + +static struct clk periph_apm_clk = { + .parent = &pll1_sw_clk, + .set_parent = _clk_periph_apm_set_parent, +}; + +static struct clk cpu_clk = { + .parent = &pll1_sw_clk, + .get_rate = clk_arm_get_rate, +}; + +static struct clk ahb_clk = { + .parent = &main_bus_clk, + .get_rate = clk_ahb_get_rate, + .set_rate = _clk_ahb_set_rate, + .round_rate = _clk_ahb_round_rate, +}; + +/* Main IP interface clock for access to registers */ +static struct clk ipg_clk = { + .parent = &ahb_clk, + .get_rate = clk_ipg_get_rate, +}; + +static struct clk ipg_perclk = { + .parent = &lp_apm_clk, + .get_rate = clk_ipg_per_get_rate, + .set_parent = _clk_ipg_per_set_parent, +}; + +static struct clk uart_root_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_uart_get_rate, + .set_parent = _clk_uart_set_parent, +}; + +static struct clk ahb_max_clk = { + .parent = &ahb_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, +}; + +static struct clk aips_tz1_clk = { + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, +}; + +static struct clk aips_tz2_clk = { + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, +}; + +static struct clk gpt_32k_clk = { + .id = 0, + .parent = &ckil_clk, +}; + +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = _clk_ccgr_enable, \ + .disable = _clk_ccgr_disable, \ + .parent = p, \ + .secondary = s, \ + } + +/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, + get_rate, set_rate, parent, secondary); */ + +/* Shared peripheral bus arbiter */ +DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, + NULL, NULL, &ipg_clk, NULL); + +/* UART */ +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &uart_root_clk, NULL); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &uart_root_clk, NULL); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &uart_root_clk, NULL); +DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz1_clk); +DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz1_clk); +DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); + +/* GPT */ +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_perclk, NULL); +DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); + +/* FEC */ +DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ipg_clk, NULL); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK(NULL, "gpt", gpt_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) +}; + +static void clk_tree_init(void) +{ + u32 reg; + + ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk); + + /* + * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at + * 8MHz, its derived from lp_apm. + * + * FIXME: Verify if true for all boards + */ + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK; + reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK; + reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK; + reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET); + __raw_writel(reg, MXC_CCM_CBCDR); +} + +int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2) +{ + int i; + + external_low_reference = ckil; + external_high_reference = ckih1; + ckih2_reference = ckih2; + oscillator_reference = osc; + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + clk_tree_init(); + + clk_enable(&cpu_clk); + clk_enable(&main_bus_clk); + + /* System timer */ + mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), + MX51_MXC_INT_GPT); + return 0; +} diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c new file mode 100644 index 00000000000..41c769f08c4 --- /dev/null +++ b/arch/arm/mach-mx5/cpu.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * This file contains the CPU initialization code. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <mach/hardware.h> +#include <asm/io.h> + +static int __init post_cpu_init(void) +{ + unsigned int reg; + void __iomem *base; + + if (!cpu_is_mx51()) + return 0; + + base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR); + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); + + base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR); + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); + + return 0; +} + +postcore_initcall(post_cpu_init); diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h new file mode 100644 index 00000000000..c776b9af062 --- /dev/null +++ b/arch/arm/mach-mx5/crm_regs.h @@ -0,0 +1,583 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__ + +#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR) +#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR) +#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR) +#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR) +#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR) +#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR) + +/* PLL Register Offsets */ +#define MXC_PLL_DP_CTL 0x00 +#define MXC_PLL_DP_CONFIG 0x04 +#define MXC_PLL_DP_OP 0x08 +#define MXC_PLL_DP_MFD 0x0C +#define MXC_PLL_DP_MFN 0x10 +#define MXC_PLL_DP_MFNMINUS 0x14 +#define MXC_PLL_DP_MFNPLUS 0x18 +#define MXC_PLL_DP_HFS_OP 0x1C +#define MXC_PLL_DP_HFS_MFD 0x20 +#define MXC_PLL_DP_HFS_MFN 0x24 +#define MXC_PLL_DP_MFN_TOGC 0x28 +#define MXC_PLL_DP_DESTAT 0x2c + +/* PLL Register Bit definitions */ +#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000 +#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 +#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12 +#define MXC_PLL_DP_CTL_ADE 0x800 +#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 +#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8) +#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8 +#define MXC_PLL_DP_CTL_HFSM 0x80 +#define MXC_PLL_DP_CTL_PRE 0x40 +#define MXC_PLL_DP_CTL_UPEN 0x20 +#define MXC_PLL_DP_CTL_RST 0x10 +#define MXC_PLL_DP_CTL_RCP 0x8 +#define MXC_PLL_DP_CTL_PLM 0x4 +#define MXC_PLL_DP_CTL_BRM0 0x2 +#define MXC_PLL_DP_CTL_LRF 0x1 + +#define MXC_PLL_DP_CONFIG_BIST 0x8 +#define MXC_PLL_DP_CONFIG_SJC_CE 0x4 +#define MXC_PLL_DP_CONFIG_AREN 0x2 +#define MXC_PLL_DP_CONFIG_LDREQ 0x1 + +#define MXC_PLL_DP_OP_MFI_OFFSET 4 +#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4) +#define MXC_PLL_DP_OP_PDF_OFFSET 0 +#define MXC_PLL_DP_OP_PDF_MASK 0xF + +#define MXC_PLL_DP_MFD_OFFSET 0 +#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_OFFSET 0x0 +#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17) +#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16) +#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0 +#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF + +#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31) +#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF + +/* Register addresses of CCM*/ +#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00) +#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04) +#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08) +#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C) +#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10) +#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14) +#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18) +#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C) +#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20) +#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24) +#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28) +#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C) +#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30) +#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34) +#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38) +#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C) +#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40) +#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44) +#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48) +#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C) +#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50) +#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54) +#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58) +#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C) +#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60) +#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64) +#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68) +#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C) +#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70) +#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74) +#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78) +#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C) +#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80) +#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84) + +/* Define the bits in register CCR */ +#define MXC_CCM_CCR_COSC_EN (1 << 12) +#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11) +#define MXC_CCM_CCR_CAMP2_EN (1 << 10) +#define MXC_CCM_CCR_CAMP1_EN (1 << 9) +#define MXC_CCM_CCR_FPM_EN (1 << 8) +#define MXC_CCM_CCR_OSCNT_OFFSET (0) +#define MXC_CCM_CCR_OSCNT_MASK (0xFF) + +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18) +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) +#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16) + +/* Define the bits in register CSR */ +#define MXC_CCM_CSR_COSR_READY (1 << 5) +#define MXC_CCM_CSR_LVS_VALUE (1 << 4) +#define MXC_CCM_CSR_CAMP2_READY (1 << 3) +#define MXC_CCM_CSR_CAMP1_READY (1 << 2) +#define MXC_CCM_CSR_FPM_READY (1 << 1) +#define MXC_CCM_CSR_REF_EN_B (1 << 0) + +/* Define the bits in register CCSR */ +#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9) +#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7) +#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7) +#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0 +#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */ +#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2 +#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3 +#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5) +#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5) +#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3) +#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3) +#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk, + 1: step_clk */ +#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1) +#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0) + +/* Define the bits in register CACRR */ +#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0) +#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7) + +/* Define the bits in register CBCDR */ +#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26) +#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25) +#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30) +#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30) +#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27) +#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27) +#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22) +#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22) +#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19) +#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19) +#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16) +#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16) +#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13) +#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13) +#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10) +#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10) +#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8) +#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8) +#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6) +#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6) +#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3) +#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3) +#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0) +#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7) + +/* Define the bits in register CBCMR */ +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14) +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14) +#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0) + +/* Define the bits in register CSCMR1 */ +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30) +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19) +#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11) +#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7) +#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1) + +/* Define the bits in register CSCMR2 */ +#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3) +#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3)) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6) +#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5) +#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3) + +/* Define the bits in register CSCDR1 */ +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7) + +/* Define the bits in register CS1CDR and CS2CDR */ +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F) + +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDCDR */ +#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28) +#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3) +#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3) +#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0) +#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7) + +/* Define the bits in register CHSCCDR */ +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7) + +/* Define the bits in register CSCDR2 */ +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR3 */ +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR4 */ +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDHIPR */ +#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8) +#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7) +#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6) +#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) +#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4) +#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3) +#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2) +#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1) +#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0) + +/* Define the bits in register CDCR */ +#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3) + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23) +#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22) +#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21) +#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20) +#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19) +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) +#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17) +#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16) +#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9) +#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) +#define MXC_CCM_CLPCR_VSTBY (0x1 << 8) +#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define MXC_CCM_CLPCR_SBYOS (0x1 << 6) +#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) +#define MXC_CCM_CLPCR_LPM_OFFSET (0) +#define MXC_CCM_CLPCR_LPM_MASK (0x3) + +/* Define the bits in register CISR */ +#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CISR_COSC_READY (0x1 << 6) +#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5) +#define MXC_CCM_CISR_CKIH_READY (0x1 << 4) +#define MXC_CCM_CISR_FPM_READY (0x1 << 3) +#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CISR_LRF_PLL1 (0x1) + +/* Define the bits in register CIMR */ +#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5) +#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4) +#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3) +#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1) + +/* Define the bits in register CCOSR */ +#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24) +#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21) +#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21) +#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16) +#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16) +#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7) +#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4) +#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4) +#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0) +#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF) + +/* Define the bits in registers CGPR */ +#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4) +#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7) + +/* Define the bits in registers CCGRx */ +#define MXC_CCM_CCGRx_CG_MASK 0x3 +#define MXC_CCM_CCGRx_MOD_OFF 0x0 +#define MXC_CCM_CCGRx_MOD_ON 0x3 +#define MXC_CCM_CCGRx_MOD_IDLE 0x1 + +#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30) +#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28) +#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26) +#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24) +#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22) +#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20) +#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18) +#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16) +#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10) +#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8) +#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6) +#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4) +#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2) +#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0) + +#define MXC_CCM_CCGRx_CG15_OFFSET 30 +#define MXC_CCM_CCGRx_CG14_OFFSET 28 +#define MXC_CCM_CCGRx_CG13_OFFSET 26 +#define MXC_CCM_CCGRx_CG12_OFFSET 24 +#define MXC_CCM_CCGRx_CG11_OFFSET 22 +#define MXC_CCM_CCGRx_CG10_OFFSET 20 +#define MXC_CCM_CCGRx_CG9_OFFSET 18 +#define MXC_CCM_CCGRx_CG8_OFFSET 16 +#define MXC_CCM_CCGRx_CG7_OFFSET 14 +#define MXC_CCM_CCGRx_CG6_OFFSET 12 +#define MXC_CCM_CCGRx_CG5_OFFSET 10 +#define MXC_CCM_CCGRx_CG4_OFFSET 8 +#define MXC_CCM_CCGRx_CG3_OFFSET 6 +#define MXC_CCM_CCGRx_CG2_OFFSET 4 +#define MXC_CCM_CCGRx_CG1_OFFSET 2 +#define MXC_CCM_CCGRx_CG0_OFFSET 0 + +#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80) +#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100) +#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180) +#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0) +#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220) +#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240) +#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260) +#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280) +#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0) +#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0) +#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0) +#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0) +#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300) + +/* CORTEXA8 platform */ +#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0) +#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4) +#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8) +#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC) +#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10) +#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14) +#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18) +#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20) +#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24) + +/* DVFS CORE */ +#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00) +#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04) +#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08) +#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C) +#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10) +#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14) +#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18) +#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C) +#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20) +#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24) +#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28) +#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C) +#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30) +#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34) +#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38) +#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C) +#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40) + +/* GPC */ +#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0) +#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4) +#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8) +#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC) +#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10) +#define MXC_GPC_PGR_ARMPG_OFFSET 8 +#define MXC_GPC_PGR_ARMPG_MASK (3 << 8) + +/* PGC */ +#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0) +#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC) +#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0) +#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC) +#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0) +#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC) + +#define MXC_PGCR_PCR 1 +#define MXC_SRPGCR_PCR 1 +#define MXC_EMPGCR_PCR 1 +#define MXC_PGSR_PSR 1 + + +#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0) +#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1) + +/* SRPG */ +#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0) +#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4) +#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8) + +#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0) +#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4) +#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8) + +#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0) +#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4) +#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8) + +#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0) +#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4) +#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8) + +#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0) +#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4) +#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8) + +#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0) +#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4) +#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8) + +#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c new file mode 100644 index 00000000000..d6fd3961ade --- /dev/null +++ b/arch/arm/mach-mx5/devices.c @@ -0,0 +1,96 @@ +/* + * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/platform_device.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> + +static struct resource uart0[] = { + { + .start = MX51_UART1_BASE_ADDR, + .end = MX51_UART1_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_UART1, + .end = MX51_MXC_INT_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = MX51_UART2_BASE_ADDR, + .end = MX51_UART2_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_UART2, + .end = MX51_MXC_INT_UART2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = MX51_UART3_BASE_ADDR, + .end = MX51_UART3_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_UART3, + .end = MX51_MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource mxc_fec_resources[] = { + { + .start = MX51_MXC_FEC_BASE_ADDR, + .end = MX51_MXC_FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_FEC, + .end = MX51_MXC_INT_FEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_fec_resources), + .resource = mxc_fec_resources, +}; + +/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */ +int __init mxc_register_gpios(void) +{ + return 0; +} diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h new file mode 100644 index 00000000000..f339ab8c19b --- /dev/null +++ b/arch/arm/mach-mx5/devices.h @@ -0,0 +1,4 @@ +extern struct platform_device mxc_uart_device0; +extern struct platform_device mxc_uart_device1; +extern struct platform_device mxc_uart_device2; +extern struct platform_device mxc_fec_device; diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c new file mode 100644 index 00000000000..c21e18be7af --- /dev/null +++ b/arch/arm/mach-mx5/mm.c @@ -0,0 +1,89 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Create static mapping between physical to virtual memory. + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-v3.h> + +/* + * Define the MX51 memory map. + */ +static struct map_desc mxc_io_desc[] __initdata = { + { + .virtual = MX51_IRAM_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR), + .length = MX51_IRAM_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_DEBUG_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR), + .length = MX51_DEBUG_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_TZIC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR), + .length = MX51_TZIC_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR), + .length = MX51_AIPS1_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR), + .length = MX51_SPBA0_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR), + .length = MX51_AIPS2_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR), + .length = MX51_NFC_AXI_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx51_map_io(void) +{ + u32 tzic_addr; + + if (mx51_revision() < MX51_CHIP_REV_2_0) + tzic_addr = 0x8FFFC000; + else + tzic_addr = 0xE0003000; + mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr); + + mxc_set_cpu_type(MXC_CPU_MX51); + mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR)); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx51_init_irq(void) +{ + tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); +} diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c index 7dbe4ca12ef..69816ba8293 100644 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -55,7 +55,7 @@ struct sys_timer zn5_timer = { MACHINE_START(MAGX_ZN5, "Motorola Zn5") .phys_io = MXC91231_AIPS1_BASE_ADDR, .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MXC91231_PHYS_OFFSET + 0x100, .map_io = mxc91231_map_io, .init_irq = mxc91231_init_irq, .timer = &zn5_timer, diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 8b0a1ee039f..7f7ad6f289b 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -9,38 +9,43 @@ choice config ARCH_MX1 bool "MX1-based" select CPU_ARM920T - select COMMON_CLKDEV + select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" select CPU_ARM926T - select COMMON_CLKDEV + select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family config ARCH_MX25 bool "MX25-based" select CPU_ARM926T - select COMMON_CLKDEV + select ARCH_MXC_IOMUX_V3 + select HAVE_FB_IMX help This enables support for systems based on the Freescale i.MX25 family config ARCH_MX3 bool "MX3-based" select CPU_V6 - select COMMON_CLKDEV help This enables support for systems based on the Freescale i.MX3 family config ARCH_MXC91231 bool "MXC91231-based" select CPU_V6 - select COMMON_CLKDEV help This enables support for systems based on the Freescale MXC91231 family +config ARCH_MX5 + bool "MX5-based" + select CPU_V7 + help + This enables support for systems based on the Freescale i.MX51 family + endchoice source "arch/arm/mach-mx1/Kconfig" @@ -48,12 +53,12 @@ source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" +source "arch/arm/mach-mx5/Kconfig" endmenu config MXC_IRQ_PRIOR bool "Use IRQ priority" - depends on ARCH_MXC help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted @@ -62,9 +67,16 @@ config MXC_IRQ_PRIOR requirements for timing. Say N here, unless you have a specialized requirement. +config MXC_TZIC + bool "Enable TrustZone Interrupt Controller" + depends on ARCH_MX51 + help + This will be automatically selected for all processors + containing this interrupt controller. + Say N here only if you are really sure. + config MXC_PWM tristate "Enable PWM driver" - depends on ARCH_MXC select HAVE_PWM help Enable support for the i.MX PWM controller(s). @@ -74,7 +86,9 @@ config MXC_ULPI config ARCH_HAS_RNGA bool - depends on ARCH_MXC + +config IMX_HAVE_IOMUX_V1 + bool config ARCH_MXC_IOMUX_V3 bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 996cbac6932..a72a5e4ca20 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -5,8 +5,12 @@ # Common support obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o -obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) +obj-$(CONFIG_MXC_TZIC) += tzic.o + +obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o +obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o +obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index da6387dcdf2..b62917ca3f9 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -50,8 +50,18 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); static int mxc_audmux_v1_init(void) { - if (cpu_is_mx27() || cpu_is_mx21()) - audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR); + else +#endif + (void)0; + return 0; } diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index b06954a8443..d983cd6c788 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -190,7 +190,10 @@ static int mxc_audmux_v2_init(void) { int ret; - if (cpu_is_mx35()) { + if (cpu_is_mx31()) + audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); + + else if (cpu_is_mx35()) { audmux_clk = clk_get(NULL, "audmux"); if (IS_ERR(audmux_clk)) { ret = PTR_ERR(audmux_clk); @@ -198,11 +201,9 @@ static int mxc_audmux_v2_init(void) ret); return ret; } + audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } - if (cpu_is_mx31() || cpu_is_mx35()) - audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); - audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 9e8fbd57495..323ff8ccc87 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -56,6 +56,7 @@ static void __clk_disable(struct clk *clk) __clk_disable(clk->parent); __clk_disable(clk->secondary); + WARN_ON(!clk->usecount); if (!(--clk->usecount) && clk->disable) clk->disable(clk); } diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 9c1b3f9c4f4..e16014b0d13 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -128,6 +128,18 @@ struct imx_dma_channel { int hw_chaining; }; +static void __iomem *imx_dmav1_baseaddr; + +static void imx_dmav1_writel(unsigned val, unsigned offset) +{ + __raw_writel(val, imx_dmav1_baseaddr + offset); +} + +static unsigned imx_dmav1_readl(unsigned offset) +{ + return __raw_readl(imx_dmav1_baseaddr + offset); +} + static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; static struct clk *dma_clk; @@ -140,7 +152,6 @@ static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) return 0; } - /* * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation */ @@ -160,17 +171,17 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) imxdma->resbytes -= now; if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel)); + imx_dmav1_writel(sg->dma_address, DMA_DAR(channel)); else - __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel)); + imx_dmav1_writel(sg->dma_address, DMA_SAR(channel)); - __raw_writel(now, DMA_BASE + DMA_CNTR(channel)); + imx_dmav1_writel(now, DMA_CNTR(channel)); pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " "size 0x%08x\n", channel, - __raw_readl(DMA_BASE + DMA_DAR(channel)), - __raw_readl(DMA_BASE + DMA_SAR(channel)), - __raw_readl(DMA_BASE + DMA_CNTR(channel))); + imx_dmav1_readl(DMA_DAR(channel)), + imx_dmav1_readl(DMA_SAR(channel)), + imx_dmav1_readl(DMA_CNTR(channel))); return now; } @@ -218,27 +229,26 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address, channel, __func__, (unsigned int)dma_address, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_SAR(channel)); + imx_dmav1_writel(dma_address, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " "dev_addr=0x%08x for write\n", channel, __func__, (unsigned int)dma_address, dma_length, dev_addr); - __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dma_address, DMA_SAR(channel)); + imx_dmav1_writel(dev_addr, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_to_device, + DMA_CCR(channel)); } else { printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", channel); return -EINVAL; } - __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel)); + imx_dmav1_writel(dma_length, DMA_CNTR(channel)); return 0; } @@ -316,17 +326,15 @@ imx_dma_setup_sg(int channel, "dev_addr=0x%08x for read\n", channel, __func__, sg, sgcount, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_SAR(channel)); + imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " "dev_addr=0x%08x for write\n", channel, __func__, sg, sgcount, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel)); } else { printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", channel); @@ -360,7 +368,7 @@ imx_dma_config_channel(int channel, unsigned int config_port, imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel)); + imx_dmav1_writel(dmareq, DMA_RSSR(channel)); return 0; } @@ -368,7 +376,7 @@ EXPORT_SYMBOL(imx_dma_config_channel); void imx_dma_config_burstlen(int channel, unsigned int burstlen) { - __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel)); + imx_dmav1_writel(burstlen, DMA_BLR(channel)); } EXPORT_SYMBOL(imx_dma_config_burstlen); @@ -398,7 +406,7 @@ imx_dma_setup_handlers(int channel, } local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); + imx_dmav1_writel(1 << channel, DMA_DISR); imxdma->irq_handler = irq_handler; imxdma->err_handler = err_handler; imxdma->data = data; @@ -462,22 +470,21 @@ void imx_dma_enable(int channel) local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(1 << channel, DMA_DISR); + imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR); + imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | + CCR_ACRPT, DMA_CCR(channel)); #ifdef CONFIG_ARCH_MX2 - if (imxdma->sg && imx_dma_hw_chain(imxdma)) { + if ((cpu_is_mx21() || cpu_is_mx27()) && + imxdma->sg && imx_dma_hw_chain(imxdma)) { imxdma->sg = sg_next(imxdma->sg); if (imxdma->sg) { u32 tmp; imx_dma_sg_next(channel, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(channel)); - __raw_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); + tmp = imx_dmav1_readl(DMA_CCR(channel)); + imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT, + DMA_CCR(channel)); } } #endif @@ -502,11 +509,10 @@ void imx_dma_disable(int channel) del_timer(&imxdma->watchdog); local_irq_save(flags); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); + imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR); + imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN, + DMA_CCR(channel)); + imx_dmav1_writel(1 << channel, DMA_DISR); imxdma->in_use = 0; local_irq_restore(flags); } @@ -517,7 +523,7 @@ static void imx_dma_watchdog(unsigned long chno) { struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(0, DMA_CCR(chno)); imxdma->in_use = 0; imxdma->sg = NULL; @@ -533,17 +539,17 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) unsigned int err_mask; int errcode; - disr = __raw_readl(DMA_BASE + DMA_DISR); + disr = imx_dmav1_readl(DMA_DISR); - err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) | - __raw_readl(DMA_BASE + DMA_DRTOSR) | - __raw_readl(DMA_BASE + DMA_DSESR) | - __raw_readl(DMA_BASE + DMA_DBOSR); + err_mask = imx_dmav1_readl(DMA_DBTOSR) | + imx_dmav1_readl(DMA_DRTOSR) | + imx_dmav1_readl(DMA_DSESR) | + imx_dmav1_readl(DMA_DBOSR); if (!err_mask) return IRQ_HANDLED; - __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR); + imx_dmav1_writel(disr & err_mask, DMA_DISR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (!(err_mask & (1 << i))) @@ -551,20 +557,20 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) imxdma = &imx_dma_channels[i]; errcode = 0; - if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR); + if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DBTOSR); errcode |= IMX_DMA_ERR_BURST; } - if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR); + if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DRTOSR); errcode |= IMX_DMA_ERR_REQUEST; } - if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DSESR); + if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DSESR); errcode |= IMX_DMA_ERR_TRANSFER; } - if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBOSR); + if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DBOSR); errcode |= IMX_DMA_ERR_BUFFER; } if (imxdma->name && imxdma->err_handler) { @@ -607,7 +613,7 @@ static void dma_irq_handle_channel(int chno) if (imxdma->sg) { imx_dma_sg_next(chno, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(chno)); + tmp = imx_dmav1_readl(DMA_CCR(chno)); if (imx_dma_hw_chain(imxdma)) { /* FIXME: The timeout should probably be @@ -617,15 +623,13 @@ static void dma_irq_handle_channel(int chno) jiffies + msecs_to_jiffies(500)); tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - __raw_writel(tmp, DMA_BASE + - DMA_CCR(chno)); + imx_dmav1_writel(tmp, DMA_CCR(chno)); } else { - __raw_writel(tmp & ~CCR_CEN, DMA_BASE + - DMA_CCR(chno)); + imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno)); tmp |= CCR_CEN; } - __raw_writel(tmp, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(tmp, DMA_CCR(chno)); if (imxdma->prog_handler) imxdma->prog_handler(chno, imxdma->data, @@ -640,7 +644,7 @@ static void dma_irq_handle_channel(int chno) } } - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(0, DMA_CCR(chno)); imxdma->in_use = 0; if (imxdma->irq_handler) imxdma->irq_handler(chno, imxdma->data); @@ -651,15 +655,16 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) int i, disr; #ifdef CONFIG_ARCH_MX2 - dma_err_handler(irq, dev_id); + if (cpu_is_mx21() || cpu_is_mx27()) + dma_err_handler(irq, dev_id); #endif - disr = __raw_readl(DMA_BASE + DMA_DISR); + disr = imx_dmav1_readl(DMA_DISR); pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", disr); - __raw_writel(disr, DMA_BASE + DMA_DISR); + imx_dmav1_writel(disr, DMA_DISR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (disr & (1 << i)) dma_irq_handle_channel(i); @@ -699,17 +704,19 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 - ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", - NULL); - if (ret) { - imxdma->name = NULL; - printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", - MXC_INT_DMACH0 + channel, channel); - return ret; + if (cpu_is_mx21() || cpu_is_mx27()) { + ret = request_irq(MX2x_INT_DMACH0 + channel, + dma_irq_handler, 0, "DMA", NULL); + if (ret) { + imxdma->name = NULL; + pr_crit("Can't register IRQ %d for DMA channel %d\n", + MX2x_INT_DMACH0 + channel, channel); + return ret; + } + init_timer(&imxdma->watchdog); + imxdma->watchdog.function = &imx_dma_watchdog; + imxdma->watchdog.data = channel; } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; #endif return ret; @@ -738,7 +745,8 @@ void imx_dma_free(int channel) imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 - free_irq(MXC_INT_DMACH0 + channel, NULL); + if (cpu_is_mx21() || cpu_is_mx27()) + free_irq(MX2x_INT_DMACH0 + channel, NULL); #endif local_irq_restore(flags); @@ -796,34 +804,53 @@ static int __init imx_dma_init(void) int ret = 0; int i; +#ifdef CONFIG_ARCH_MX1 + if (cpu_is_mx1()) + imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); + else +#endif + BUG(); + dma_clk = clk_get(NULL, "dma"); clk_enable(dma_clk); /* reset DMA module */ - __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR); + imx_dmav1_writel(DCR_DRST, DMA_DCR); #ifdef CONFIG_ARCH_MX1 - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } + if (cpu_is_mx1()) { + ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); + if (ret) { + pr_crit("Wow! Can't register IRQ for DMA\n"); + return ret; + } - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - return ret; + ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL); + if (ret) { + pr_crit("Wow! Can't register ERRIRQ for DMA\n"); + free_irq(MX1_DMA_INT, NULL); + return ret; + } } #endif /* enable DMA module */ - __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR); + imx_dmav1_writel(DCR_DEN, DMA_DCR); /* clear all interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR); + imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); /* disable interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR); + imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { imx_dma_channels[i].sg = NULL; diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 41599be882e..cb0b6387448 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -25,25 +25,37 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX31_OTG_SIC_SHIFT 29 -#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) #define MX31_H2_SIC_SHIFT 21 -#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT) +#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) #define MX31_H2_PM_BIT (1 << 16) #define MX31_H2_DT_BIT (1 << 5) #define MX31_H1_SIC_SHIFT 13 -#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT) +#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) + int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; - +#ifdef CONFIG_ARCH_MX3 if (cpu_is_mx31()) { - v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR + + v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -51,15 +63,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; - if (flags & MXC_EHCI_POWER_PINS_ENABLED) + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX31_OTG_PM_BIT; break; case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT); + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; - if (flags & MXC_EHCI_POWER_PINS_ENABLED) + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX31_H1_PM_BIT; if (!(flags & MXC_EHCI_TTL_ENABLED)) @@ -67,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags) break; case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT); + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) @@ -77,13 +89,103 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v |= MX31_H2_DT_BIT; break; + default: + return -EINVAL; } - writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR + + writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } + if (cpu_is_mx35()) { + v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_ARCH_MX3 */ +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + /* On i.MX27 we can use the i.MX31 USBCTRL bits, they + * are identical + */ + v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H2_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_MACH_MX27 */ printk(KERN_WARNING "%s() unable to setup USBCONTROL for this CPU\n", __func__); return -EINVAL; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index d65ebe303b9..70b23893f09 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -140,16 +140,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) val = __raw_readl(reg); edge = (val >> (bit << 1)) & 3; val &= ~(0x3 << (bit << 1)); - switch (edge) { - case GPIO_INT_HIGH_LEV: + if (edge == GPIO_INT_HIGH_LEV) { edge = GPIO_INT_LOW_LEV; pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - break; - case GPIO_INT_LOW_LEV: + } else if (edge == GPIO_INT_LOW_LEV) { edge = GPIO_INT_HIGH_LEV; pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - break; - default: + } else { pr_err("mxc: invalid configuration for GPIO %d: %x\n", gpio, edge); return; @@ -157,25 +154,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) __raw_writel(val | (edge << (bit << 1)), reg); } -/* handle n interrupts in one status register */ +/* handle 32 interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { - u32 gpio_irq_no; + u32 gpio_irq_no_base = port->virtual_irq_start; - gpio_irq_no = port->virtual_irq_start; - for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { - u32 gpio = irq_to_gpio(gpio_irq_no); - - if ((irq_stat & 1) == 0) - continue; + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; - BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + if (port->both_edges & (1 << irqoffset)) + mxc_flip_edge(port, irqoffset); - if (port->both_edges & (1 << (gpio & 31))) - mxc_flip_edge(port, gpio); + generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, - &irq_desc[gpio_irq_no]); + irq_stat &= ~(1 << irqoffset); } } diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h index 05ff2f31ef1..93cc66f104c 100644 --- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h +++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h @@ -21,19 +21,19 @@ /* * KZM-ARM11-01 Board Control Registers on FPGA */ -#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003) +#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) /* * External UART for touch panel on FPGA */ -#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050) +#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 2cbfa35e82f..095a199591c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -14,7 +14,7 @@ #include <mach/hardware.h> /* Base address of PBC controller */ -#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT /* Offsets for the PBC Controller register */ /* PBC Board status register offset */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index d5be6b5a6ac..fc5fec9b55f 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -25,6 +25,7 @@ enum mx31moboard_boards { MX31NOBOARD = 0, MX31DEVBOARD = 1, MX31MARXBOT = 2, + MX31SMARTBOT = 3, }; /* @@ -34,6 +35,7 @@ enum mx31moboard_boards { extern void mx31moboard_devboard_init(void); extern void mx31moboard_marxbot_init(void); +extern void mx31moboard_smartbot_init(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h index 43a82d0c534..753a5988d85 100644 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ b/arch/arm/plat-mxc/include/mach/clock.h @@ -26,13 +26,6 @@ struct module; struct clk { -#ifndef CONFIG_COMMON_CLKDEV - /* As soon as i.MX1 and i.MX31 switched to clkdev, this - * block can go away */ - struct list_head node; - struct module *owner; - const char *name; -#endif int id; /* Source clock this clk depends on */ struct clk *parent; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 4bf1068ffad..2941472582d 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -20,14 +20,17 @@ extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); +extern void mx51_map_io(void); extern void mxc91231_map_io(void); extern void mxc_init_irq(void __iomem *); +extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); extern void mx21_init_irq(void); extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); +extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -36,6 +39,8 @@ extern int mx25_clocks_init(void); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); +extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2); extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 15b2b148a10..133d66bfb53 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#define IMX_NEEDS_DEPRECATED_SYMBOLS #ifdef CONFIG_ARCH_MX1 #include <mach/mx1.h> @@ -44,13 +45,22 @@ #define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) #endif +#ifdef CONFIG_ARCH_MX5 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#include <mach/mx51.h> +#define UART_PADDR MX51_UART1_BASE_ADDR +#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR) +#endif + #ifdef CONFIG_ARCH_MXC91231 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #include <mach/mxc91231.h> #define UART_PADDR MXC91231_UART2_BASE_ADDR -#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) +#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 7cf290efe76..aeb08697726 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -18,11 +18,16 @@ .endm .macro get_irqnr_preamble, base, tmp +#ifndef CONFIG_MXC_TZIC ldr \base, =avic_base ldr \base, [\base] #ifdef CONFIG_MXC_IRQ_PRIOR ldr r4, [\base, #AVIC_NIMASK] #endif +#elif defined CONFIG_MXC_TZIC + ldr \base, =tzic_base + ldr \base, [\base] +#endif /* CONFIG_MXC_TZIC */ .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -32,6 +37,7 @@ @ and returns its number in irqnr @ and returns if an interrupt occured in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority @ interrupt pending from AVIC_NIVECSR ldr \irqstat, [\base, #0x40] @@ -45,6 +51,32 @@ strne \tmp, [\base, #AVIC_NIMASK] streq r4, [\base, #AVIC_NIMASK] #endif +#elif defined CONFIG_MXC_TZIC + @ Load offset & priority of the highest priority + @ interrupt pending. + @ 0xD80 is HIPND0 register + mov \irqnr, #0 + mov \irqstat, #0x0D80 +1000: + ldr \tmp, [\irqstat, \base] + cmp \tmp, #0 + bne 1001f + addeq \irqnr, \irqnr, #32 + addeq \irqstat, \irqstat, #4 + cmp \irqnr, #128 + blo 1000b + b 2001f +1001: mov \irqstat, #1 +1002: tst \tmp, \irqstat + bne 2002f + movs \tmp, \tmp, lsr #1 + addne \irqnr, \irqnr, #1 + bne 1002b +2001: + mov \irqnr, #0 +2002: + movs \irqnr, \irqnr +#endif .endm @ irq priority table (not used) diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 78db75475f6..ebadf4ac43f 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -22,6 +22,15 @@ #include <asm/sizes.h> +#define IMX_IO_ADDRESS(addr, module) \ + ((void __force __iomem *) \ + (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\ + (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)) + +#ifdef CONFIG_ARCH_MX5 +#include <mach/mx51.h> +#endif + #ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> #include <mach/mx31.h> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h index bf23305c19c..6b1507cf378 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h @@ -1,166 +1,155 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX1_H__ +#define __MACH_IOMUX_MX1_H__ -#ifndef _MXC_IOMUX_MX1_H -#define _MXC_IOMUX_MX1_H +#include <mach/iomux-v1.h> -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif +#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) +#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) +#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) +#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) +#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) +#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) +#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) +#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) +#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) +#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) +#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) +#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) +#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) +#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) +#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) +#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) +#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) +#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) +#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) +#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) +#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) +#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) +#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) +#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) +#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) +#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) +#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) +#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) +#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) +#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) +#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) +#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) +#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) +#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) +#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) +#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) +#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) +#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) +#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) +#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) +#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) +#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) +#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) +#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) +#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) +#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) +#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) +#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) +#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) +#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) +#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) +#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) +#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) +#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) +#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) +#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) +#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) +#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) +#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) +#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) +#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) +#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) +#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) +#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) +#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) +#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) +#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) +#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) +#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) +#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) +#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) +#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) +#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) +#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) +#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) +#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) +#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) +#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) +#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) +#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) +#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) +#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) +#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) +#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) +#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) +#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) +#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) +#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) +#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) +#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) +#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) +#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) +#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) +#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) +#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) +#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) +#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) +#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) +#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) +#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) +#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) -/* FIXME: This list is not completed. The correct directions are -* missing on some (many) pins -*/ - - -/* Primary GPIO pin functions */ - -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) - - -#endif +#endif /* ifndef __MACH_IOMUX_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h index 63aaa972e27..1495dfda783 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h @@ -1,126 +1,122 @@ /* -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX21_H -#define _MXC_IOMUX_MX21_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX21_H__ +#define __MACH_IOMUX_MX21_H__ + +#include <mach/iomux-mx2x.h> +#include <mach/iomux-v1.h> /* Primary GPIO pin functions */ -#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) -#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) -#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) -#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) -#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) -#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) -#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) -#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) -#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) -#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) -#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) -#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) -#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) -#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) +#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) +#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) +#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) +#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) +#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) +#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) +#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) +#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) +#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) +#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) +#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) +#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) +#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) +#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) /* Alternate GPIO pin functions */ -#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) -#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) -#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) -#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) -#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) -#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) -#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) -#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) -#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) -#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) -#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) -#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) -#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) -#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) -#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) -#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) -#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) -#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) +#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) +#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) +#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) +#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) +#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) +#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) +#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) +#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) +#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) +#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) +#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) +#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) +#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) +#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) +#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) +#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) +#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) +#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) /* AIN GPIO pin functions */ -#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) -#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) -#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) -#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) -#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) -#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) -#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) -#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) -#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) -#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) -#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) +#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) +#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) +#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) +#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) +#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) +#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) +#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) +#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) +#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) +#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) +#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) /* BIN GPIO pin functions */ -#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) -#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) +#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) /* CIN GPIO pin functions */ -#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) +#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) /* AOUT GPIO pin functions */ -#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) -#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) -#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) -#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) -#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) -#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) -#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) -#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) -#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) -#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) -#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) -#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) -#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) -#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) -#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) - - -#endif +#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) +#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) +#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) +#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) +#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) +#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) +#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) +#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) +#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) +#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) +#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) +#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) +#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) +#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) +#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) + +#endif /* ifndef __MACH_IOMUX_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 9af494f0ab3..f39220d1b67 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -7,7 +7,7 @@ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. * and * arch/arm/plat-mxc/include/mach/iomux-mx35.h - * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -16,24 +16,11 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#ifndef __IOMUX_MX25_H__ -#define __IOMUX_MX25_H__ +#ifndef __MACH_IOMUX_MX25_H__ +#define __MACH_IOMUX_MX25_H__ #include <mach/iomux-v3.h> -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - -/* - * - * @brief MX25 I/O Pin List - * - * @ingroup GPIO_MX25 - */ - -#ifndef __ASSEMBLY__ - /* * IOMUX/PAD Bit field definitions */ @@ -462,9 +449,11 @@ #define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) @@ -513,5 +502,4 @@ #define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#endif // __ASSEMBLY__ -#endif // __IOMUX_MX25_H__ +#endif /* __MACH_IOMUX_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h index 5ac158b70f6..d9f9a6e32d8 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h @@ -1,207 +1,205 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX27_H -#define _MXC_IOMUX_MX27_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX27_H__ +#define __MACH_IOMUX_MX27_H__ + +#include <mach/iomux-mx2x.h> +#include <mach/iomux-v1.h> /* Primary GPIO pin functions */ -#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) -#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) -#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) -#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) -#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) -#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) -#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) -#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) -#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) -#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) -#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) -#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) -#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) -#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) -#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) -#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) -#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) -#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) -#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) -#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) -#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) -#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) -#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) -#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) -#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) -#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) -#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) -#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) -#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) -#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) -#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) -#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) -#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) -#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) -#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) -#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) -#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) -#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) -#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) +#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) +#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) +#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) +#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) +#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) +#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) +#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) +#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) +#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) +#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) +#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) +#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) +#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) +#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) +#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) +#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) +#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) +#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) +#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) +#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) +#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) +#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) +#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) +#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) +#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) +#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) +#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) +#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) +#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) +#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) +#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) +#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) +#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) +#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) +#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) +#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) +#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) /* Alternate GPIO pin functions */ -#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) -#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) -#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) -#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) -#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) -#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) -#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) -#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) -#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) -#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) -#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) -#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) -#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) -#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) -#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) -#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) -#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) -#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) -#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) -#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) -#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) -#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) -#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) -#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) -#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) -#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) -#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) -#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) -#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) -#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) -#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) -#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) -#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) -#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) -#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) -#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) -#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) -#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) -#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) -#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) -#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) -#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) -#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) +#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) +#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) +#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) +#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) +#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) +#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) +#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) +#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) +#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) +#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) +#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) +#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) +#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) +#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) +#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) +#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) +#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) +#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) +#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) +#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) +#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) +#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) +#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) +#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) +#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) +#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) +#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) +#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) +#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) +#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) +#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) +#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) +#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) +#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) +#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) +#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) +#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) +#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) +#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) +#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) +#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) +#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) +#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) +#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) +#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) /* AIN GPIO pin functions */ -#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) -#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) +#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) +#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) /* BIN GPIO pin functions */ -#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) /* CIN GPIO pin functions */ -#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) -#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) -#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) -#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) -#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) -#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) -#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) -#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) -#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) -#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) -#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) -#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) -#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) -#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) -#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) -#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) -#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) +#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) +#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) +#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) +#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) +#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) +#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) +#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) +#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) +#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) +#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) +#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) +#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) +#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) +#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) +#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) +#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) +#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */ /* AOUT GPIO pin functions */ -#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) -#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) - -#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) -#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) -#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) -#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) -#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) -#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) -#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) - - -#endif /* _MXC_GPIO_MX1_MX2_H */ +#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) +#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) + +/* BOUT GPIO pin functions */ + +#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) +#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) +#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) +#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) +#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) +#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) +#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) + +#endif /* __MACH_IOMUX_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h index fb5ae638e79..c4f116d214f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h @@ -1,237 +1,230 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX2x_H -#define _MXC_IOMUX_MX2x_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX2x_H__ +#define __MACH_IOMUX_MX2x_H__ /* Primary GPIO pin functions */ -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) -#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) -#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) -#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) -#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) -#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) -#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) -#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) -#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) -#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) -#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) -#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) -#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) -#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) -#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) -#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) -#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) -#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) -#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) -#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) -#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) -#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) -#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) -#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) -#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) -#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) -#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) -#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) -#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) -#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) -#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) -#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) -#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) -#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) -#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) +#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) +#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) +#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) +#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) +#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) +#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) +#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) +#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) +#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) +#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) +#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) +#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) +#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) +#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) +#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) +#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) +#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) +#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) +#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) +#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) +#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) +#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) +#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) +#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) +#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) +#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) +#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) +#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) +#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) /* Alternate GPIO pin functions */ -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) -#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) -#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) -#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) -#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) -#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) -#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) -#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) -#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) -#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) -#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) -#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) -#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) -#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) -#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) -#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) -#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) -#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) -#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) -#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) +#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) +#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) +#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) +#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) +#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) +#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) +#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) +#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) +#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) +#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) +#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) +#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) +#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) +#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) +#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) +#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) +#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) +#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) +#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) /* AIN GPIO pin functions */ -#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) -#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) -#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) -#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) -#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) -#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) -#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) -#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) -#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) -#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) -#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) -#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) -#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) -#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) -#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) -#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) -#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) -#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) -#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) -#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) -#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) -#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) -#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) -#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) -#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) -#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) -#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) -#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) -#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) -#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) -#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) -#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) -#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) -#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) +#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) +#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) +#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) +#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) +#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) +#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) +#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) +#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) +#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) +#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) +#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) +#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) +#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) +#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) +#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) +#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) +#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) +#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) +#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) +#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) +#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) +#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) +#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) +#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) +#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) +#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) +#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) +#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) +#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) +#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) +#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) +#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) +#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) +#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) /* BIN GPIO pin functions */ -#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) +#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) /* CIN GPIO pin functions */ -#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) -#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) -#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) -#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) -#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) -#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) -#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) -#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) -#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) -#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) +#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) +#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) +#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) +#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) +#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) +#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) +#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) +#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) +#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) +#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) /* AOUT GPIO pin functions */ -#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) -#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) +#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) +#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8) -#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) -#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) - +#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) +#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) -#endif +#endif /* ifndef __MACH_IOMUX_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index e1fc6da1cd1..e51465d7b22 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -16,12 +16,10 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - -#ifndef __MACH_MX31_IOMUX_H__ -#define __MACH_MX31_IOMUX_H__ +#ifndef __MACH_IOMUX_MX3_H__ +#define __MACH_IOMUX_MX3_H__ #include <linux/types.h> - /* * various IOMUX output functions */ @@ -34,7 +32,7 @@ #define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ #define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ #define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ #define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ #define IOMUX_ICONFIG_FUNC 2 /* used as function */ #define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ @@ -167,11 +165,6 @@ int mxc_iomux_mode(unsigned int pin_mode); MXC_GPIO_IRQ_START) /* - * The number of gpio devices among the pads - */ -#define GPIO_PORT_MAX 3 - -/* * This enumeration is constructed based on the Section * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated * value is constructed based on the rules described above. @@ -633,40 +626,40 @@ enum iomux_pins { #define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC) #define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO) #define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) #define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC) #define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC) #define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO) #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) @@ -711,8 +704,8 @@ enum iomux_pins { #define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1) #define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO) @@ -727,13 +720,14 @@ enum iomux_pins { #define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) -/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 - * cspi1_ss1*/ +/* + * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0, + * cspi2_ss1, cspi1_ss0 cspi1_ss1 + */ /* * This function configures the pad value for a IOMUX pin. */ void mxc_iomux_set_pad(enum iomux_pins, u32); -#endif - +#endif /* ifndef __MACH_IOMUX_MX3_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h index c88d40795f7..2a24bae1b87 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -1,5 +1,5 @@ /* - * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h new file mode 100644 index 00000000000..b4f975e6a66 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -0,0 +1,326 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX51_H__ +#define __MACH_IOMUX_MX51_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/* Pad control groupings */ +#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH) +#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* + * FIXME: This was converted using scripts from existing Freescale code to + * this form used upstream. Need to verify the name format. + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ + +#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) + +/* Babbage UART3 */ +#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL) + +#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) +/* REVISIT: Not sure of these values + + #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL) + #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL) + #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +*/ +#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) + +/* Babbage UART1 */ +#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL) + +/* Babbage UART2 */ +#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL) + +#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \ + (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)) +#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) + +/* EIM */ +#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h new file mode 100644 index 00000000000..884f5753f27 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_V1_H__ +#define __MACH_IOMUX_V1_H__ + +/* +* GPIO Module and I/O Multiplexer +* x = 0..3 for reg_A, reg_B, reg_C, reg_D +*/ +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#define MX1_NUM_GPIO_PORT 4 +#define MX21_NUM_GPIO_PORT 6 +#define MX27_NUM_GPIO_PORT 6 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) + +#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) +#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) +#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) + +extern int mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label); +extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); + +#endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 1deda018489..f2f73d31d5b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -81,11 +81,13 @@ struct pad_desc { #define PAD_CTL_ODE (1 << 3) -#define PAD_CTL_DSE_STANDARD (0 << 1) -#define PAD_CTL_DSE_HIGH (1 << 1) -#define PAD_CTL_DSE_MAX (2 << 1) +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) #define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) /* * setups a single pad in the iomuxer diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h index 011cfcd8b82..3d226d7e7be 100644 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -1,102 +1,14 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_H -#define _MXC_IOMUX_H - -/* -* GPIO Module and I/O Multiplexer -* x = 0..3 for reg_A, reg_B, reg_C, reg_D -*/ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif -#ifdef CONFIG_ARCH_MX25 -# define GPIO_PORT_MAX 3 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __MACH_IOMUX_H__ +#define __MACH_IOMUX_H__ +/* This file will go away, please include mach/iomux-mx... directly */ #ifdef CONFIG_ARCH_MX1 #include <mach/iomux-mx1.h> @@ -110,25 +22,5 @@ #include <mach/iomux-mx27.h> #endif #endif -#ifdef CONFIG_ARCH_MX25 -#include <mach/iomux-mx25.h> -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) -#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) - - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); - -#endif +#endif /* __MACH_IOMUX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 0cb347645db..86781f7b0c0 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -12,22 +12,29 @@ #define __ASM_ARCH_MXC_IRQS_H__ /* - * So far all i.MX SoCs have 64 internal interrupts + * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ +#ifdef CONFIG_MXC_TZIC +#define MXC_INTERNAL_IRQS 128 +#else #define MXC_INTERNAL_IRQS 64 +#endif #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -#if defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX2 +/* these are ordered by size to support multi-SoC kernels */ +#if defined CONFIG_ARCH_MX2 #define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) +#elif defined CONFIG_ARCH_MX1 +#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX25 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MX5 +#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MXC91231 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MX3 +#define MXC_GPIO_IRQS (32 * 3) #endif /* @@ -51,6 +58,7 @@ #else #define MX3_IPU_IRQS 0 #endif +/* REVISIT: Add IPU irqs on IMX51 */ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index d3afafdcc0e..c4b40c35a6a 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -11,37 +11,45 @@ #ifndef __ASM_ARCH_MXC_MEMORY_H__ #define __ASM_ARCH_MXC_MEMORY_H__ -#if defined CONFIG_ARCH_MX1 -#define PHYS_OFFSET UL(0x08000000) -#elif defined CONFIG_ARCH_MX2 -#ifdef CONFIG_MACH_MX21 -#define PHYS_OFFSET UL(0xC0000000) -#endif -#ifdef CONFIG_MACH_MX27 -#define PHYS_OFFSET UL(0xA0000000) -#endif -#elif defined CONFIG_ARCH_MX3 -#define PHYS_OFFSET UL(0x80000000) -#elif defined CONFIG_ARCH_MX25 -#define PHYS_OFFSET UL(0x80000000) -#elif defined CONFIG_ARCH_MXC91231 -#define PHYS_OFFSET UL(0x90000000) +#define MX1_PHYS_OFFSET UL(0x08000000) +#define MX21_PHYS_OFFSET UL(0xc0000000) +#define MX25_PHYS_OFFSET UL(0x80000000) +#define MX27_PHYS_OFFSET UL(0xa0000000) +#define MX3x_PHYS_OFFSET UL(0x80000000) +#define MX51_PHYS_OFFSET UL(0x90000000) +#define MXC91231_PHYS_OFFSET UL(0x90000000) + +#if !defined(CONFIG_RUNTIME_PHYS_OFFSET) +# if defined CONFIG_ARCH_MX1 +# define PHYS_OFFSET MX1_PHYS_OFFSET +# elif defined CONFIG_MACH_MX21 +# define PHYS_OFFSET MX21_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX25 +# define PHYS_OFFSET MX25_PHYS_OFFSET +# elif defined CONFIG_MACH_MX27 +# define PHYS_OFFSET MX27_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX3 +# define PHYS_OFFSET MX3x_PHYS_OFFSET +# elif defined CONFIG_ARCH_MXC91231 +# define PHYS_OFFSET MXC91231_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX5 +# define PHYS_OFFSET MX51_PHYS_OFFSET +# endif #endif -#if defined(CONFIG_MX1_VIDEO) +#if defined(CONFIG_MX3_VIDEO) /* * Increase size of DMA-consistent memory region. - * This is required for i.MX camera driver to capture at least four VGA frames. + * This is required for mx3 camera driver to capture at least two QXGA frames. */ -#define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO */ +#define CONSISTENT_DMA_SIZE SZ_8M -#if defined(CONFIG_MX3_VIDEO) +#elif defined(CONFIG_MX1_VIDEO) /* * Increase size of DMA-consistent memory region. - * This is required for mx3 camera driver to capture at least two QXGA frames. + * This is required for i.MX camera driver to capture at least four VGA frames. */ -#define CONSISTENT_DMA_SIZE SZ_8M -#endif /* CONFIG_MX3_VIDEO */ +#define CONSISTENT_DMA_SIZE SZ_4M +#endif /* CONFIG_MX1_VIDEO */ #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h deleted file mode 100644 index 1ab1bba5688..00000000000 --- a/arch/arm/plat-mxc/include/mach/mtd-xip.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <mach/mxc_timer.h> - -#ifndef __ARCH_IMX_MTD_XIP_H__ -#define __ARCH_IMX_MTD_XIP_H__ - -#ifdef CONFIG_ARCH_MX1 -/* AITC registers */ -#define AITC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define NIPNDH (AITC_BASE + 0x58) -#define NIPNDL (AITC_BASE + 0x5C) -#define INTENABLEH (AITC_BASE + 0x10) -#define INTENABLEL (AITC_BASE + 0x14) -/* MTD macros */ -#define xip_irqpending() ((__raw_readl(INTENABLEH) & __raw_readl(NIPNDH)) \ - || (__raw_readl(INTENABLEL) & __raw_readl(NIPNDL))) -#define xip_currtime() (__raw_readl(TIMER_BASE + MXC_TCN)) -#define xip_elapsed_since(x) (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96) -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0)) -#endif /* CONFIG_ARCH_MX1 */ - -#endif /* __ARCH_IMX_MTD_XIP_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 1b2890a5c45..5eba7e6785d 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -9,156 +9,289 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_MX1_H__ -#define __ASM_ARCH_MXC_MX1_H__ +#ifndef __MACH_MX1_H__ +#define __MACH_MX1_H__ #include <mach/vmalloc.h> /* * Memory map */ -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE VMALLOC_END +#define MX1_IO_BASE_ADDR 0x00200000 +#define MX1_IO_SIZE SZ_1M +#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 +#define MX1_CS0_PHYS 0x10000000 +#define MX1_CS0_SIZE 0x02000000 -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 +#define MX1_CS1_PHYS 0x12000000 +#define MX1_CS1_SIZE 0x01000000 -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 +#define MX1_CS2_PHYS 0x13000000 +#define MX1_CS2_SIZE 0x01000000 -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 +#define MX1_CS3_PHYS 0x14000000 +#define MX1_CS3_SIZE 0x01000000 -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 +#define MX1_CS4_PHYS 0x15000000 +#define MX1_CS4_SIZE 0x01000000 -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 +#define MX1_CS5_PHYS 0x16000000 +#define MX1_CS5_SIZE 0x01000000 /* * Register BASEs, based on OFFSETs */ -#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS) -#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS) -#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS) -#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS) -#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS) -#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS) -#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS) -#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS) -#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS) -#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS) -#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS) -#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS) -#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS) -#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS) -#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS) -#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS) -#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS) -#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS) -#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS) -#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS) -#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS) -#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS) -#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS) -#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS) -#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS) -#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS) -#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS) -#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS) -#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS) +#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) +#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) +#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) +#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) +#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) +#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) +#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) +#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) +#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) +#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) +#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) +#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) +#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) +#define MX1_SPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) +#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) +#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) +#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) +#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) +#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) +#define MX1_SPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) +#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) +#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) +#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) +#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) +#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) +#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) +#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) +#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE) - -/* define macros needed for entry-macro.S */ -#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) +#define MX1_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX1_IO)) /* fixed interrput numbers */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 -#define WDT_INT 63 +#define MX1_INT_SOFTINT 0 +#define MX1_CSI_INT 6 +#define MX1_DSPA_MAC_INT 7 +#define MX1_DSPA_INT 8 +#define MX1_COMP_INT 9 +#define MX1_MSHC_XINT 10 +#define MX1_GPIO_INT_PORTA 11 +#define MX1_GPIO_INT_PORTB 12 +#define MX1_GPIO_INT_PORTC 13 +#define MX1_LCDC_INT 14 +#define MX1_SIM_INT 15 +#define MX1_SIM_DATA_INT 16 +#define MX1_RTC_INT 17 +#define MX1_RTC_SAMINT 18 +#define MX1_UART2_MINT_PFERR 19 +#define MX1_UART2_MINT_RTS 20 +#define MX1_UART2_MINT_DTR 21 +#define MX1_UART2_MINT_UARTC 22 +#define MX1_UART2_MINT_TX 23 +#define MX1_UART2_MINT_RX 24 +#define MX1_UART1_MINT_PFERR 25 +#define MX1_UART1_MINT_RTS 26 +#define MX1_UART1_MINT_DTR 27 +#define MX1_UART1_MINT_UARTC 28 +#define MX1_UART1_MINT_TX 29 +#define MX1_UART1_MINT_RX 30 +#define MX1_VOICE_DAC_INT 31 +#define MX1_VOICE_ADC_INT 32 +#define MX1_PEN_DATA_INT 33 +#define MX1_PWM_INT 34 +#define MX1_SDHC_INT 35 +#define MX1_I2C_INT 39 +#define MX1_CSPI_INT 41 +#define MX1_SSI_TX_INT 42 +#define MX1_SSI_TX_ERR_INT 43 +#define MX1_SSI_RX_INT 44 +#define MX1_SSI_RX_ERR_INT 45 +#define MX1_TOUCH_INT 46 +#define MX1_USBD_INT0 47 +#define MX1_USBD_INT1 48 +#define MX1_USBD_INT2 49 +#define MX1_USBD_INT3 50 +#define MX1_USBD_INT4 51 +#define MX1_USBD_INT5 52 +#define MX1_USBD_INT6 53 +#define MX1_BTSYS_INT 55 +#define MX1_BTTIM_INT 56 +#define MX1_BTWUI_INT 57 +#define MX1_TIM2_INT 58 +#define MX1_TIM1_INT 59 +#define MX1_DMA_ERR 60 +#define MX1_DMA_INT 61 +#define MX1_GPIO_INT_PORTD 62 +#define MX1_WDT_INT 63 /* DMA */ -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20 + (x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* __ASM_ARCH_MXC_MX1_H__ */ +#define MX1_DMA_REQ_UART3_T 2 +#define MX1_DMA_REQ_UART3_R 3 +#define MX1_DMA_REQ_SSI2_T 4 +#define MX1_DMA_REQ_SSI2_R 5 +#define MX1_DMA_REQ_CSI_STAT 6 +#define MX1_DMA_REQ_CSI_R 7 +#define MX1_DMA_REQ_MSHC 8 +#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 +#define MX1_DMA_REQ_DSPA_DCT_DIN 10 +#define MX1_DMA_REQ_DSPA_MAC 11 +#define MX1_DMA_REQ_EXT 12 +#define MX1_DMA_REQ_SDHC 13 +#define MX1_DMA_REQ_SPI1_R 14 +#define MX1_DMA_REQ_SPI1_T 15 +#define MX1_DMA_REQ_SSI_T 16 +#define MX1_DMA_REQ_SSI_R 17 +#define MX1_DMA_REQ_ASP_DAC 18 +#define MX1_DMA_REQ_ASP_ADC 19 +#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) +#define MX1_DMA_REQ_SPI2_R 26 +#define MX1_DMA_REQ_SPI2_T 27 +#define MX1_DMA_REQ_UART2_T 28 +#define MX1_DMA_REQ_UART2_R 29 +#define MX1_DMA_REQ_UART1_T 30 +#define MX1_DMA_REQ_UART1_R 31 + +/* + * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS + * to not break drivers/usb/gadget/imx_udc. Should go + * away after this driver uses the new name. + */ +#define USBD_INT0 MX1_USBD_INT0 + +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS +/* these should go away */ +#define IMX_IO_PHYS MX1_IO_BASE_ADDR +#define IMX_IO_SIZE MX1_IO_SIZE +#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT +#define IMX_CS0_PHYS MX1_CS0_PHYS +#define IMX_CS0_SIZE MX1_CS0_SIZE +#define IMX_CS1_PHYS MX1_CS1_PHYS +#define IMX_CS1_SIZE MX1_CS1_SIZE +#define IMX_CS2_PHYS MX1_CS2_PHYS +#define IMX_CS2_SIZE MX1_CS2_SIZE +#define IMX_CS3_PHYS MX1_CS3_PHYS +#define IMX_CS3_SIZE MX1_CS3_SIZE +#define IMX_CS4_PHYS MX1_CS4_PHYS +#define IMX_CS4_SIZE MX1_CS4_SIZE +#define IMX_CS5_PHYS MX1_CS5_PHYS +#define IMX_CS5_SIZE MX1_CS5_SIZE +#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR +#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR +#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR +#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR +#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR +#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR +#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR +#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR +#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR +#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR +#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR +#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR +#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR +#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR +#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR +#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR +#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR +#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR +#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR +#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR +#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR +#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR +#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR +#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR +#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR +#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR +#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR +#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR +#define IO_ADDRESS(x) MX1_IO_ADDRESS(x) +#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) +#define INT_SOFTINT MX1_INT_SOFTINT +#define CSI_INT MX1_CSI_INT +#define DSPA_MAC_INT MX1_DSPA_MAC_INT +#define DSPA_INT MX1_DSPA_INT +#define COMP_INT MX1_COMP_INT +#define MSHC_XINT MX1_MSHC_XINT +#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA +#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB +#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC +#define LCDC_INT MX1_LCDC_INT +#define SIM_INT MX1_SIM_INT +#define SIM_DATA_INT MX1_SIM_DATA_INT +#define RTC_INT MX1_RTC_INT +#define RTC_SAMINT MX1_RTC_SAMINT +#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR +#define UART2_MINT_RTS MX1_UART2_MINT_RTS +#define UART2_MINT_DTR MX1_UART2_MINT_DTR +#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC +#define UART2_MINT_TX MX1_UART2_MINT_TX +#define UART2_MINT_RX MX1_UART2_MINT_RX +#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR +#define UART1_MINT_RTS MX1_UART1_MINT_RTS +#define UART1_MINT_DTR MX1_UART1_MINT_DTR +#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC +#define UART1_MINT_TX MX1_UART1_MINT_TX +#define UART1_MINT_RX MX1_UART1_MINT_RX +#define VOICE_DAC_INT MX1_VOICE_DAC_INT +#define VOICE_ADC_INT MX1_VOICE_ADC_INT +#define PEN_DATA_INT MX1_PEN_DATA_INT +#define PWM_INT MX1_PWM_INT +#define SDHC_INT MX1_SDHC_INT +#define I2C_INT MX1_I2C_INT +#define CSPI_INT MX1_CSPI_INT +#define SSI_TX_INT MX1_SSI_TX_INT +#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT +#define SSI_RX_INT MX1_SSI_RX_INT +#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT +#define TOUCH_INT MX1_TOUCH_INT +#define USBD_INT1 MX1_USBD_INT1 +#define USBD_INT2 MX1_USBD_INT2 +#define USBD_INT3 MX1_USBD_INT3 +#define USBD_INT4 MX1_USBD_INT4 +#define USBD_INT5 MX1_USBD_INT5 +#define USBD_INT6 MX1_USBD_INT6 +#define BTSYS_INT MX1_BTSYS_INT +#define BTTIM_INT MX1_BTTIM_INT +#define BTWUI_INT MX1_BTWUI_INT +#define TIM2_INT MX1_TIM2_INT +#define TIM1_INT MX1_TIM1_INT +#define DMA_ERR MX1_DMA_ERR +#define DMA_INT MX1_DMA_INT +#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD +#define WDT_INT MX1_WDT_INT +#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T +#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R +#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T +#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R +#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT +#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R +#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC +#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT +#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN +#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC +#define DMA_REQ_EXT MX1_DMA_REQ_EXT +#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC +#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R +#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T +#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T +#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R +#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC +#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC +#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x) +#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R +#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T +#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T +#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R +#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T +#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R +#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */ + +#endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index bb297d8765a..ed98b9c9f38 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -22,8 +22,8 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX21_H__ -#define __ASM_ARCH_MXC_MX21_H__ +#ifndef __MACH_MX21_H__ +#define __MACH_MX21_H__ #define MX21_AIPI_BASE_ADDR 0x10000000 #define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000 @@ -92,6 +92,11 @@ #define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ +#define MX21_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX21_AIPI) ?: \ + IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \ + IMX_IO_ADDRESS(x, MX21_X_MEMC)) + /* fixed interrupt numbers */ #define MX21_INT_CSPI3 6 #define MX21_INT_GPIO 8 @@ -179,6 +184,7 @@ #define MX21_DMA_REQ_CSI_STAT 30 #define MX21_DMA_REQ_CSI_RX 31 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR @@ -211,5 +217,6 @@ #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX +#endif -#endif /* __ASM_ARCH_MXC_MX21_H__ */ +#endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 854e2dc5848..4eb6e334bda 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -22,27 +22,27 @@ #define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000) #define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000) -#define MX25_AIPS1_IO_ADDRESS(x) \ - (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) -#define MX25_AIPS2_IO_ADDRESS(x) \ - (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT) -#define MX25_AVIC_IO_ADDRESS(x) \ - (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT) +#define MX25_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX25_AVIC)) -#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE) - -#define MX25_IO_ADDRESS(x) \ - (void __force __iomem *) \ - (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \ - __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \ - __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -#define UART1_BASE_ADDR 0x43f90000 -#define UART2_BASE_ADDR 0x43f94000 +#define MX25_UART1_BASE_ADDR 0x43f90000 +#define MX25_UART2_BASE_ADDR 0x43f94000 #define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_NFC_BASE_ADDR 0xbb000000 +#define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_LCDC_BASE_ADDR 0x53fbc000 +#define MX25_INT_DRYICE 25 #define MX25_INT_FEC 57 +#define MX25_INT_NANDFC 33 +#define MX25_INT_LCDC 39 + +#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) +#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX25_UART2_BASE_ADDR +#endif -#endif /* __MACH_MX25_H__ */ +#endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index e2ae19f5171..bae9cd75bee 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -21,8 +21,12 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX27_H__ -#define __ASM_ARCH_MXC_MX27_H__ +#ifndef __MACH_MX27_H__ +#define __MACH_MX27_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif #define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000 @@ -109,11 +113,31 @@ #define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) #define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) +#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + #define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 /* IRAM */ #define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ +#define MX27_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX27_AIPI) ?: \ + IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \ + IMX_IO_ADDRESS(x, MX27_X_MEMC)) + +#ifndef __ASSEMBLER__ +static inline void mx27_setup_weimcs(size_t cs, + unsigned upper, unsigned lower, unsigned addional) +{ + __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs))); + __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs))); + __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs))); +} +#endif + /* fixed interrupt numbers */ #define MX27_INT_I2C2 1 #define MX27_INT_GPT6 2 @@ -225,6 +249,7 @@ extern int mx27_revision(void); #endif +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR @@ -292,5 +317,6 @@ extern int mx27_revision(void); #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3 #define DMA_REQ_NFC MX27_DMA_REQ_NFC +#endif -#endif /* __ASM_ARCH_MXC_MX27_H__ */ +#endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index f2eaf140ed0..afb895a0b5b 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -20,8 +20,8 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX2x_H__ -#define __ASM_ARCH_MXC_MX2x_H__ +#ifndef __MACH_MX2x_H__ +#define __MACH_MX2x_H__ /* The following addresses are common between i.MX21 and i.MX27 */ @@ -176,6 +176,7 @@ #define MX2x_DMA_REQ_CSI_STAT 30 #define MX2x_DMA_REQ_CSI_RX 31 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT @@ -287,5 +288,6 @@ #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX +#endif -#endif /* __ASM_ARCH_MXC_MX2x_H__ */ +#endif /* ifndef __MACH_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index b8b47d139eb..fb90e119c2b 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,3 +1,10 @@ +#ifndef __MACH_MX31_H__ +#define __MACH_MX31_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif + /* * IRAM */ @@ -107,8 +114,30 @@ #define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) #define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR +#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + #define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 +#define MX31_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX31_AVIC) ?: \ + IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MX31_SPBA0)) + +#ifndef __ASSEMBLER__ +static inline void mx31_setup_weimcs(size_t cs, + unsigned upper, unsigned lower, unsigned addional) +{ + __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs))); + __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs))); + __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs))); +} +#endif + #define MX31_INT_I2C3 3 #define MX31_INT_I2C2 4 #define MX31_INT_MPEG4_ENCODER 5 @@ -186,6 +215,7 @@ #define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0 #define MX31_SYSTEM_REV_NUM 3 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR @@ -216,3 +246,6 @@ #define MXC_INT_UART5 MX31_INT_UART5 #define MXC_INT_CCM MX31_INT_CCM #define MXC_INT_PCMCIA MX31_INT_PCMCIA +#endif + +#endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index af871bce35b..526a55842ae 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -1,3 +1,5 @@ +#ifndef __MACH_MX35_H__ +#define __MACH_MX35_H__ /* * IRAM */ @@ -104,6 +106,13 @@ #define MX35_NFC_BASE_ADDR 0xbb000000 #define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 +#define MX35_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX35_AVIC) ?: \ + IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MX35_SPBA0)) + /* * Interrupt numbers */ @@ -180,6 +189,7 @@ #define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 #define MX35_SYSTEM_REV_NUM 3 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR #define MXC_INT_OWIRE MX35_INT_OWIRE @@ -195,3 +205,6 @@ #define MXC_INT_MLB MX35_INT_MLB #define MXC_INT_SPDIF MX35_INT_SPDIF #define MXC_INT_FEC MX35_INT_FEC +#endif + +#endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index be69272407a..7a356de385f 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ +#ifndef __MACH_MX3x_H__ +#define __MACH_MX3x_H__ /* * MX31 memory map: @@ -269,6 +269,7 @@ static inline int mx31_revision(void) } #endif +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR #define L2CC_SIZE MX3x_L2CC_SIZE @@ -401,5 +402,6 @@ static inline int mx31_revision(void) #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM +#endif -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +#endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h new file mode 100644 index 00000000000..771532b6b4a --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -0,0 +1,454 @@ +#ifndef __ASM_ARCH_MXC_MX51_H__ +#define __ASM_ARCH_MXC_MX51_H__ + +/* + * MX51 memory map: + * + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * 30000000 256M GPU + * 40000000 512M IPU + * FA200000 60000000 1M DEBUG + * FB100000 70000000 1M SPBA 0 + * FB000000 73F00000 1M AIPS 1 + * FB200000 83F00000 1M AIPS 2 + * FA100000 8FFFC000 16K TZIC (interrupt controller) + * 90000000 256M CSD0 SDRAM/DDR + * A0000000 256M CSD1 SDRAM/DDR + * B0000000 128M CS0 Flash + * B8000000 128M CS1 Flash + * C0000000 128M CS2 Flash + * C8000000 64M CS3 Flash + * CC000000 32M CS4 SRAM + * CE000000 32M CS5 SRAM + * F9000000 CFFF0000 64K NFC (NAND Flash AXI) + * + */ + +/* + * IRAM + */ +#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_PARTITIONS 16 +#define MX51_IRAM_PARTITIONS_TO1 12 +#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * NFC + */ +#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000 +#define MX51_NFC_AXI_SIZE SZ_64K + +/* + * Graphics Memory of GPU + */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU2D_BASE_ADDR 0xD0000000 + +#define MX51_TZIC_BASE_ADDR 0x8FFFC000 +#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000 +#define MX51_TZIC_SIZE SZ_16K + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 +#define MX51_DEBUG_SIZE SZ_1M +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) +#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) +#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) +#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) +#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) + +/* + * defines for SPBA modules + */ +#define MX51_SPBA_SDHC1 0x04 +#define MX51_SPBA_SDHC2 0x08 +#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_CSPI1 0x10 +#define MX51_SPBA_SSI2 0x14 +#define MX51_SPBA_SDHC3 0x20 +#define MX51_SPBA_SDHC4 0x24 +#define MX51_SPBA_SPDIF 0x28 +#define MX51_SPBA_ATA 0x30 +#define MX51_SPBA_SLIM 0x34 +#define MX51_SPBA_HSI2C 0x38 +#define MX51_SPBA_CTRL 0x3C + +/* + * AIPS 1 + */ +#define MX51_AIPS1_BASE_ADDR 0x73F00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) + +/* + * Defines for modules using static and dynamic DMA channels + */ +#define MX51_MXC_DMA_CHANNEL_IRAM 30 +#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL +#ifdef CONFIG_SDMA_IRAM +#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1) +#else /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL +#endif /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL + +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83F00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 +#define MX51_AIPS2_SIZE SZ_1M + +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) +#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) +#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) +#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) + +/* + * Memory regions and CS + */ +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xA0000000 +#define MX51_CS0_BASE_ADDR 0xB0000000 +#define MX51_CS1_BASE_ADDR 0xB8000000 +#define MX51_CS2_BASE_ADDR 0xC0000000 +#define MX51_CS3_BASE_ADDR 0xC8000000 +#define MX51_CS4_BASE_ADDR 0xCC000000 +#define MX51_CS5_BASE_ADDR 0xCE000000 + +/* Does given address belongs to the specified memory region? */ +#define ADDRESS_IN_REGION(addr, start, size) \ + (((addr) >= (start)) && ((addr) < (start)+(size))) + +/* Does given address belongs to the specified named `module'? */ +#define MX51_IS_MODULE(addr, module) \ + ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ + MX51_ ## module ## _SIZE) +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ + +#define MX51_IO_ADDRESS(x) \ + (void __iomem *) \ + (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \ + 0xDEADBEEF) + +/* + * define the address mapping macros: in physical address order + */ +#define MX51_IRAM_IO_ADDRESS(x) \ + (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) + +#define MX51_TZIC_IO_ADDRESS(x) \ + (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT) + +#define MX51_DEBUG_IO_ADDRESS(x) \ + (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) + +#define MX51_SPBA0_IO_ADDRESS(x) \ + (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) + +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) + +#define MX51_AIPS2_IO_ADDRESS(x) \ + (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) + +#define MX51_NFC_AXI_IO_ADDRESS(x) \ + (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT) + +#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 + +/* + * DMA request assignments + */ +#define MX51_DMA_REQ_SSI3_TX1 47 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_SSI1_TX1 29 +#define MX51_DMA_REQ_SSI1_RX1 28 +#define MX51_DMA_REQ_SSI1_TX2 27 +#define MX51_DMA_REQ_SSI1_RX2 26 +#define MX51_DMA_REQ_SSI2_TX1 25 +#define MX51_DMA_REQ_SSI2_RX1 24 +#define MX51_DMA_REQ_SSI2_TX2 23 +#define MX51_DMA_REQ_SSI2_RX2 22 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_VPU 0 + +/* + * Interrupt numbers + */ +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_MXC_INT_MMC_SDHC1 1 +#define MX51_MXC_INT_MMC_SDHC2 2 +#define MX51_MXC_INT_MMC_SDHC3 3 +#define MX51_MXC_INT_MMC_SDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_MXC_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_MXC_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_MXC_INT_SSI1 29 +#define MX51_MXC_INT_SSI2 30 +#define MX51_MXC_INT_UART1 31 +#define MX51_MXC_INT_UART2 32 +#define MX51_MXC_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_MXC_INT_CSPI1 36 +#define MX51_MXC_INT_CSPI2 37 +#define MX51_MXC_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_MXC_INT_I2C1 62 +#define MX51_MXC_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_MXC_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 + +/* silicon revisions specific to i.MX51 */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 + +/* Mandatory defines used globally */ + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +extern unsigned int system_rev; + +static inline unsigned int mx51_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 51990536b84..a790bf21297 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -30,6 +30,7 @@ #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 +#define MXC_CPU_MX51 51 #define MXC_CPU_MXC91231 91231 #ifndef __ASSEMBLY__ @@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif +#ifdef CONFIG_ARCH_MX5 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX51 +# endif +# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51) +#else +# define cpu_is_mx51() (0) +#endif + #ifdef CONFIG_ARCH_MXC91231 # ifdef mxc_cpu_type # undef mxc_cpu_type @@ -121,9 +134,10 @@ extern unsigned int __mxc_cpu_type; #endif #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) -#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10) -#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4) -#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) +/* These are deprecated, use mx[23][157]_setup_weimcs instead. */ +#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10)) +#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4)) +#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8)) #endif #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231()) diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 81484d1ef23..5182b986b78 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -184,60 +184,22 @@ #define MXC91231_CS4_BASE_ADDR 0xB4000000 #define MXC91231_CS5_BASE_ADDR 0xB6000000 -/* Is given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Is given address belongs to the specified named `module'? */ -#define MXC91231_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \ - MXC91231_ ## module ## _SIZE) /* * This macro defines the physical to virtual address mapping for all the * peripheral modules. It is used by passing in the physical address as x * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MXC91231_IO_ADDRESS(x) \ - (void __iomem *) \ - (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \ - 0xDEADBEEF) - - -/* - * define the address mapping macros: in physical address order + * it returns 0. */ -#define MXC91231_L2CC_IO_ADDRESS(x) \ - (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT) - -#define MXC91231_AIPS1_IO_ADDRESS(x) \ - (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT) - -#define MXC91231_SPBA0_IO_ADDRESS(x) \ - (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT) - -#define MXC91231_SPBA1_IO_ADDRESS(x) \ - (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT) - -#define MXC91231_AIPS2_IO_ADDRESS(x) \ - (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT) - -#define MXC91231_ROMP_IO_ADDRESS(x) \ - (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT) - -#define MXC91231_AVIC_IO_ADDRESS(x) \ - (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT) -#define MXC91231_X_MEMC_IO_ADDRESS(x) \ - (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT) +#define MXC91231_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MXC91231_L2CC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_ROMP) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AVIC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AIPS2)) /* * Interrupt numbers diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 8f796239393..4b9b8368c0c 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -22,6 +22,10 @@ #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) #define MXC_EHCI_TTL_ENABLED (1 << 6) +#define MXC_EHCI_INTERNAL_PHY (1 << 7) +#define MXC_EHCI_IPPUE_DOWN (1 << 8) +#define MXC_EHCI_IPPUE_UP (1 << 9) + struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h new file mode 100644 index 00000000000..c34ded523f1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ssi.h @@ -0,0 +1,18 @@ +#ifndef __MACH_SSI_H +#define __MACH_SSI_H + +struct snd_ac97; + +extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; +extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; + +struct imx_ssi_platform_data { + unsigned int flags; +#define IMX_SSI_DMA (1 << 0) +#define IMX_SSI_USE_AC97 (1 << 1) + void (*ac97_reset) (struct snd_ac97 *ac97); + void (*ac97_warm_reset)(struct snd_ac97 *ac97); +}; + +#endif /* __MACH_SSI_H */ + diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 527a6c24788..024416ed11c 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -28,6 +28,8 @@ #define CLOCK_TICK_RATE 16625000 #elif defined CONFIG_ARCH_MX25 #define CLOCK_TICK_RATE 16000000 +#elif defined CONFIG_ARCH_MX5 +#define CLOCK_TICK_RATE 8000000 #elif defined CONFIG_ARCH_MXC91231 #define CLOCK_TICK_RATE 13000000 #endif diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d49384cb1e9..52e476a150c 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -1,8 +1,6 @@ /* * arch/arm/plat-mxc/include/mach/uncompress.h * - * - * * Copyright (C) 1999 ARM Limited * Copyright (C) Shane Nay (shane@minirl.com) * @@ -25,7 +23,6 @@ #define __MXC_BOOT_UNCOMPRESS -#include <mach/hardware.h> #include <asm/mach-types.h> static unsigned long uart_base; diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c deleted file mode 100644 index a37163ce280..00000000000 --- a/arch/arm/plat-mxc/iomux-mx1-mx2.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * arch/arm/mach-mxc/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <asm/mach/map.h> -#include <mach/iomux.h> - -void mxc_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port)); - if (gpio_mode & GPIO_PUEN) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port)); - - /* Data direction */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port)); - if (gpio_mode & GPIO_OUT) - tmp |= 1 << pin; - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port)); - - /* Primary / alternate function */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port)); - if (gpio_mode & GPIO_AF) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port)); - - /* use as gpio? */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port)); - if (gpio_mode & (GPIO_PF | GPIO_AF)) - tmp &= ~(1 << pin); - else - tmp |= (1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port)); - - if (pin < 16) { - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port)); - } else { - pin -= 16; - - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port)); - } -} -EXPORT_SYMBOL(mxc_gpio_mode); - -int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - ret = gpio_request(gpio, label); - if (ret) - goto setup_error; - - mxc_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - mxc_gpio_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); - -void mxc_gpio_release_multiple_pins(const int *pin_list, int count) -{ - const int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - gpio_free(gpio); - p++; - } - -} -EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); - diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c new file mode 100644 index 00000000000..960a02cbcba --- /dev/null +++ b/arch/arm/plat-mxc/iomux-v1.c @@ -0,0 +1,238 @@ +/* + * arch/arm/plat-mxc/iomux-v1.c + * + * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH + * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix + * + * Common code for i.MX1, i.MX21 and i.MX27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach/map.h> +#include <mach/iomux-v1.h> + +static void __iomem *imx_iomuxv1_baseaddr; +static unsigned imx_iomuxv1_numports; + +static inline unsigned long imx_iomuxv1_readl(unsigned offset) +{ + return __raw_readl(imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) +{ + __raw_writel(val, imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_rmwl(unsigned offset, + unsigned long mask, unsigned long value) +{ + unsigned long reg = imx_iomuxv1_readl(offset); + + reg &= ~mask; + reg |= value; + + imx_iomuxv1_writel(reg, offset); +} + +static inline void imx_iomuxv1_set_puen( + unsigned int port, unsigned int pin, int on) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0); +} + +static inline void imx_iomuxv1_set_ddir( + unsigned int port, unsigned int pin, int out) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0); +} + +static inline void imx_iomuxv1_set_gpr( + unsigned int port, unsigned int pin, int af) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0); +} + +static inline void imx_iomuxv1_set_gius( + unsigned int port, unsigned int pin, int inuse) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0); +} + +static inline void imx_iomuxv1_set_ocr( + unsigned int port, unsigned int pin, unsigned int ocr) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = ocr << shift; + unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfa( + unsigned int port, unsigned int pin, unsigned int aout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = aout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfb( + unsigned int port, unsigned int pin, unsigned int bout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = bout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +int mxc_gpio_mode(int gpio_mode) +{ + unsigned int pin = gpio_mode & GPIO_PIN_MASK; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; + unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3; + unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3; + + if (port >= imx_iomuxv1_numports) + return -EINVAL; + + /* Pullup enable */ + imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN); + + /* Data direction */ + imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT); + + /* Primary / alternate function */ + imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF); + + /* use as gpio? */ + imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF))); + + imx_iomuxv1_set_ocr(port, pin, ocr); + + imx_iomuxv1_set_iconfa(port, pin, aout); + + imx_iomuxv1_set_iconfb(port, pin, bout); + + return 0; +} +EXPORT_SYMBOL(mxc_gpio_mode); + +static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) +{ + size_t i; + int ret; + + for (i = 0; i < count; ++i) { + ret = mxc_gpio_mode(list[i]); + + if (ret) + return ret; + } + + return ret; +} + +int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label) +{ + size_t i; + int ret; + + for (i = 0; i < count; ++i) { + unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); + + ret = gpio_request(gpio, label); + if (ret) + goto err_gpio_request; + } + + ret = imx_iomuxv1_setup_multiple(pin_list, count); + if (ret) + goto err_setup; + + return 0; + +err_setup: + BUG_ON(i != count); + +err_gpio_request: + mxc_gpio_release_multiple_pins(pin_list, i); + + return ret; +} +EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); + +void mxc_gpio_release_multiple_pins(const int *pin_list, int count) +{ + size_t i; + + for (i = 0; i < count; ++i) { + unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); + + gpio_free(gpio); + } +} +EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); + +static int imx_iomuxv1_init(void) +{ +#ifdef CONFIG_ARCH_MX1 + if (cpu_is_mx1()) { + imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX1_NUM_GPIO_PORT; + } else +#endif +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) { + imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX21_NUM_GPIO_PORT; + } else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX27_NUM_GPIO_PORT; + } else +#endif + return -ENODEV; + + return 0; +} +pure_initcall(imx_iomuxv1_init); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 844567ee35f..c1ce51abdba 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -30,9 +30,15 @@ #include <asm/mach/time.h> #include <mach/common.h> +/* + * There are 2 versions of the timer hardware on Freescale MXC hardware. + * Version 1: MX1/MXL, MX21, MX27. + * Version 2: MX25, MX31, MX35, MX37, MX51 + */ + /* defines common for all i.MX */ #define MXC_TCTL 0x00 -#define MXC_TCTL_TEN (1 << 0) +#define MXC_TCTL_TEN (1 << 0) /* Enable module */ #define MXC_TPRER 0x04 /* MX1, MX21, MX27 */ @@ -47,8 +53,8 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MXC91231 */ -#define MX3_TCTL_WAITEN (1 << 3) +/* MX31, MX35, MX25, MXC91231, MX5 */ +#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define MX3_TCTL_CLK_IPG (1 << 6) #define MX3_TCTL_FRR (1 << 9) #define MX3_IR 0x0c @@ -57,6 +63,9 @@ #define MX3_TCN 0x24 #define MX3_TCMP 0x10 +#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) +#define timer_is_v2() (!timer_is_v1()) + static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; @@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void) { unsigned int tmp; - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(0, timer_base + MX3_IR); else { tmp = __raw_readl(timer_base + MXC_TCTL); @@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void) static inline void gpt_irq_enable(void) { - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(1<<0, timer_base + MX3_IR); else { __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, @@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void) static void gpt_irq_acknowledge(void) { - if (cpu_is_mx1()) - __raw_writel(0, timer_base + MX1_2_TSTAT); - if (cpu_is_mx2()) - __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v1()) { + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + else + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, + timer_base + MX1_2_TSTAT); + } else if (timer_is_v2()) __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); } @@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) clocksource_mxc.read = mx3_get_cycles; clocksource_mxc.mult = clocksource_hz2mult(c, @@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, timer_base + MX3_TCMP); else @@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) tstat = __raw_readl(timer_base + MX3_TSTAT); else tstat = __raw_readl(timer_base + MX1_2_TSTAT); @@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) clockevent_mxc.set_next_event = mx3_set_next_event; clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, @@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c new file mode 100644 index 00000000000..afa6709db0b --- /dev/null +++ b/arch/arm/plat-mxc/tzic.c @@ -0,0 +1,172 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> + +#include <asm/mach/irq.h> + +#include <mach/hardware.h> + +/* + ***************************************** + * TZIC Registers * + ***************************************** + */ + +#define TZIC_INTCNTL 0x0000 /* Control register */ +#define TZIC_INTTYPE 0x0004 /* Controller Type register */ +#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */ +#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */ +#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */ +#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */ +#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */ +#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */ +#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */ +#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */ +#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */ +#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */ +#define TZIC_PND0 0x0D00 /* Pending Register 0 */ +#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */ +#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */ +#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ +#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ + +void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ + +/** + * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void tzic_mask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index)); +} + +/** + * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void tzic_unmask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index)); +} + +static unsigned int wakeup_intr[4]; + +/** + * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source. + * + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * disble as wake-up if equal to zero + * + * @return This function returns 0 on success. + */ +static int tzic_set_wake_irq(unsigned int irq, unsigned int enable) +{ + unsigned int index, off; + + index = irq >> 5; + off = irq & 0x1F; + + if (index > 3) + return -EINVAL; + + if (enable) + wakeup_intr[index] |= (1 << off); + else + wakeup_intr[index] &= ~(1 << off); + + return 0; +} + +static struct irq_chip mxc_tzic_chip = { + .name = "MXC_TZIC", + .ack = tzic_mask_irq, + .mask = tzic_mask_irq, + .unmask = tzic_unmask_irq, + .set_wake = tzic_set_wake_irq, +}; + +/* + * This function initializes the TZIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init tzic_init_irq(void __iomem *irqbase) +{ + int i; + + tzic_base = irqbase; + /* put the TZIC into the reset value with + * all interrupts disabled + */ + i = __raw_readl(tzic_base + TZIC_INTCNTL); + + __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); + __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); + __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + + /* disable all interrupts */ + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + + /* all IRQ no FIQ Warning :: No selection */ + + for (i = 0; i < MXC_INTERNAL_IRQS; i++) { + set_irq_chip(i, &mxc_tzic_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); +} + +/** + * tzic_enable_wake() - enable wakeup interrupt + * + * @param is_idle 1 if called in idle loop (ENSET0 register); + * 0 to be used when called from low power entry + * @return 0 if successful; non-zero otherwise + */ +int tzic_enable_wake(int is_idle) +{ + unsigned int i, v; + + __raw_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + return -EAGAIN; + + for (i = 0; i < 4; i++) { + v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i]; + __raw_writel(v, TZIC_WAKEUP0(i)); + } + + return 0; +} diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 677cd53f18c..4f99274b24c 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -444,7 +444,7 @@ config MTD_NAND_FSL_UPM config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MX2 || ARCH_MX3 + depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 help This enables the driver for the NAND flash controller on the MXC processors. diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 60d665a17a8..b801f5ab2b7 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) temp = readl(sport->port.membase + USR2); if (temp & USR2_BRCD) { - writel(temp | USR2_BRCD, sport->port.membase + USR2); + writel(USR2_BRCD, sport->port.membase + USR2); if (uart_handle_break(&sport->port)) continue; } diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c index 4bc2bf3d602..20a802ecaa1 100644 --- a/drivers/usb/gadget/fsl_mx3_udc.c +++ b/drivers/usb/gadget/fsl_mx3_udc.c @@ -17,6 +17,8 @@ #include <linux/fsl_devices.h> #include <linux/platform_device.h> +#include <mach/hardware.h> + static struct clk *mxc_ahb_clk; static struct clk *mxc_usb_clk; @@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev) pdata = pdev->dev.platform_data; - mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); - if (IS_ERR(mxc_ahb_clk)) - return PTR_ERR(mxc_ahb_clk); + if (!cpu_is_mx35()) { + mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); + if (IS_ERR(mxc_ahb_clk)) + return PTR_ERR(mxc_ahb_clk); - ret = clk_enable(mxc_ahb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); - goto eenahb; + ret = clk_enable(mxc_ahb_clk); + if (ret < 0) { + dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); + goto eenahb; + } } /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ @@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); + ret = -EINVAL; goto eclkrate; } @@ -66,9 +71,11 @@ eclkrate: clk_put(mxc_usb_clk); mxc_usb_clk = NULL; egusb: - clk_disable(mxc_ahb_clk); + if (!cpu_is_mx35()) + clk_disable(mxc_ahb_clk); eenahb: - clk_put(mxc_ahb_clk); + if (!cpu_is_mx35()) + clk_put(mxc_ahb_clk); return ret; } @@ -90,6 +97,8 @@ void fsl_udc_clk_release(void) clk_disable(mxc_usb_clk); clk_put(mxc_usb_clk); } - clk_disable(mxc_ahb_clk); - clk_put(mxc_ahb_clk); + if (!cpu_is_mx35()) { + clk_disable(mxc_ahb_clk); + clk_put(mxc_ahb_clk); + } } diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 5a5c303a637..83d40ed2f2d 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -400,9 +400,12 @@ config FB_SA1100 If you plan to use the LCD display with your SA-1100 system, say Y here. +config HAVE_FB_IMX + bool + config FB_IMX tristate "Motorola i.MX LCD support" - depends on FB && (ARCH_MX1 || ARCH_MX2) + depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT |