diff options
40 files changed, 2763 insertions, 2907 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index d98bafcaca5..385c2626b66 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -71,6 +71,7 @@ config GENERIC_CALIBRATE_DELAY config IRQCHIP_DEMUX_GPIO bool + depends on (BF53x || BF561) default y source "init/Kconfig" @@ -114,6 +115,26 @@ config BF537 help BF537 Processor Support. +config BF542 + bool "BF542" + help + BF542 Processor Support. + +config BF544 + bool "BF544" + help + BF544 Processor Support. + +config BF548 + bool "BF548" + help + BF548 Processor Support. + +config BF549 + bool "BF549" + help + BF549 Processor Support. + config BF561 bool "BF561" help @@ -125,6 +146,11 @@ choice prompt "Silicon Rev" default BF_REV_0_2 if BF537 default BF_REV_0_3 if BF533 + default BF_REV_0_0 if BF549 + +config BF_REV_0_0 + bool "0.0" + depends on (BF549) config BF_REV_0_2 bool "0.2" @@ -150,6 +176,16 @@ config BF_REV_NONE endchoice +config BF53x + bool + depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) + default y + +config BF54x + bool + depends on (BF542 || BF544 || BF548 || BF549) + default y + config BFIN_DUAL_CORE bool depends on (BF561) @@ -198,6 +234,12 @@ config BFIN537_BLUETECHNIX_CM help CM-BF537 support for EVAL- and DEV-Board. +config BFIN548_EZKIT + bool "BF548-EZKIT" + depends on (BF548 || BF549) + help + BFIN548-EZKIT board Support. + config BFIN561_BLUETECHNIX_CM bool "Bluetechnix CM-BF561" depends on (BF561) @@ -265,6 +307,7 @@ config BFIN_SHARED_FLASH_ENET source "arch/blackfin/mach-bf533/Kconfig" source "arch/blackfin/mach-bf561/Kconfig" source "arch/blackfin/mach-bf537/Kconfig" +source "arch/blackfin/mach-bf548/Kconfig" menu "Board customizations" @@ -543,7 +586,7 @@ source "mm/Kconfig" config BFIN_DMA_5XX bool "Enable DMA Support" - depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561) + depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x) default y help DMA driver for BF5xx. @@ -839,7 +882,7 @@ endchoice endmenu -if (BF537 || BF533) +if (BF537 || BF533 || BF54x) menu "CPU Frequency scaling" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 6971a4418df..1b75672dfc8 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533 machine-$(CONFIG_BF534) := bf537 machine-$(CONFIG_BF536) := bf537 machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index f3b7d2f9d49..93d21406cad 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -6,9 +6,10 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ - sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \ - flat.o + sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o +obj-$(CONFIG_BF53x) += bfin_gpio.o +obj-$(CONFIG_BF561) += bfin_gpio.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 069a896a8f2..8a16c2bbec0 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -34,6 +34,7 @@ #include <linux/kernel.h> #include <linux/param.h> +#include <asm/blackfin.h> #include <asm/dma.h> #include <asm/cacheflush.h> @@ -45,67 +46,6 @@ ***************************************************************************/ static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL]; -#if defined (CONFIG_BF561) -static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { - (struct dma_register *) DMA1_0_NEXT_DESC_PTR, - (struct dma_register *) DMA1_1_NEXT_DESC_PTR, - (struct dma_register *) DMA1_2_NEXT_DESC_PTR, - (struct dma_register *) DMA1_3_NEXT_DESC_PTR, - (struct dma_register *) DMA1_4_NEXT_DESC_PTR, - (struct dma_register *) DMA1_5_NEXT_DESC_PTR, - (struct dma_register *) DMA1_6_NEXT_DESC_PTR, - (struct dma_register *) DMA1_7_NEXT_DESC_PTR, - (struct dma_register *) DMA1_8_NEXT_DESC_PTR, - (struct dma_register *) DMA1_9_NEXT_DESC_PTR, - (struct dma_register *) DMA1_10_NEXT_DESC_PTR, - (struct dma_register *) DMA1_11_NEXT_DESC_PTR, - (struct dma_register *) DMA2_0_NEXT_DESC_PTR, - (struct dma_register *) DMA2_1_NEXT_DESC_PTR, - (struct dma_register *) DMA2_2_NEXT_DESC_PTR, - (struct dma_register *) DMA2_3_NEXT_DESC_PTR, - (struct dma_register *) DMA2_4_NEXT_DESC_PTR, - (struct dma_register *) DMA2_5_NEXT_DESC_PTR, - (struct dma_register *) DMA2_6_NEXT_DESC_PTR, - (struct dma_register *) DMA2_7_NEXT_DESC_PTR, - (struct dma_register *) DMA2_8_NEXT_DESC_PTR, - (struct dma_register *) DMA2_9_NEXT_DESC_PTR, - (struct dma_register *) DMA2_10_NEXT_DESC_PTR, - (struct dma_register *) DMA2_11_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR, - (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR, - (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, - (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, -}; -#else -static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { - (struct dma_register *) DMA0_NEXT_DESC_PTR, - (struct dma_register *) DMA1_NEXT_DESC_PTR, - (struct dma_register *) DMA2_NEXT_DESC_PTR, - (struct dma_register *) DMA3_NEXT_DESC_PTR, - (struct dma_register *) DMA4_NEXT_DESC_PTR, - (struct dma_register *) DMA5_NEXT_DESC_PTR, - (struct dma_register *) DMA6_NEXT_DESC_PTR, - (struct dma_register *) DMA7_NEXT_DESC_PTR, -#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536)) - (struct dma_register *) DMA8_NEXT_DESC_PTR, - (struct dma_register *) DMA9_NEXT_DESC_PTR, - (struct dma_register *) DMA10_NEXT_DESC_PTR, - (struct dma_register *) DMA11_NEXT_DESC_PTR, -#endif - (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, - (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, - (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, - (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, -}; -#endif /*------------------------------------------------------------------------------ * Set the Buffer Clear bit in the Configuration register of specific DMA @@ -138,149 +78,6 @@ static int __init blackfin_dma_init(void) arch_initcall(blackfin_dma_init); -/* - * Form the channel find the irq number for that channel. - */ -#if !defined(CONFIG_BF561) - -static int bf533_channel2irq(unsigned int channel) -{ - int ret_irq = -1; - - switch (channel) { - case CH_PPI: - ret_irq = IRQ_PPI; - break; - -#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536)) - case CH_EMAC_RX: - ret_irq = IRQ_MAC_RX; - break; - - case CH_EMAC_TX: - ret_irq = IRQ_MAC_TX; - break; - - case CH_UART1_RX: - ret_irq = IRQ_UART1_RX; - break; - - case CH_UART1_TX: - ret_irq = IRQ_UART1_TX; - break; -#endif - - case CH_SPORT0_RX: - ret_irq = IRQ_SPORT0_RX; - break; - - case CH_SPORT0_TX: - ret_irq = IRQ_SPORT0_TX; - break; - - case CH_SPORT1_RX: - ret_irq = IRQ_SPORT1_RX; - break; - - case CH_SPORT1_TX: - ret_irq = IRQ_SPORT1_TX; - break; - - case CH_SPI: - ret_irq = IRQ_SPI; - break; - - case CH_UART_RX: - ret_irq = IRQ_UART_RX; - break; - - case CH_UART_TX: - ret_irq = IRQ_UART_TX; - break; - - case CH_MEM_STREAM0_SRC: - case CH_MEM_STREAM0_DEST: - ret_irq = IRQ_MEM_DMA0; - break; - - case CH_MEM_STREAM1_SRC: - case CH_MEM_STREAM1_DEST: - ret_irq = IRQ_MEM_DMA1; - break; - } - return ret_irq; -} - -# define channel2irq(channel) bf533_channel2irq(channel) - -#else - -static int bf561_channel2irq(unsigned int channel) -{ - int ret_irq = -1; - - switch (channel) { - case CH_PPI0: - ret_irq = IRQ_PPI0; - break; - case CH_PPI1: - ret_irq = IRQ_PPI1; - break; - case CH_SPORT0_RX: - ret_irq = IRQ_SPORT0_RX; - break; - case CH_SPORT0_TX: - ret_irq = IRQ_SPORT0_TX; - break; - case CH_SPORT1_RX: - ret_irq = IRQ_SPORT1_RX; - break; - case CH_SPORT1_TX: - ret_irq = IRQ_SPORT1_TX; - break; - case CH_SPI: - ret_irq = IRQ_SPI; - break; - case CH_UART_RX: - ret_irq = IRQ_UART_RX; - break; - case CH_UART_TX: - ret_irq = IRQ_UART_TX; - break; - - case CH_MEM_STREAM0_SRC: - case CH_MEM_STREAM0_DEST: - ret_irq = IRQ_MEM_DMA0; - break; - case CH_MEM_STREAM1_SRC: - case CH_MEM_STREAM1_DEST: - ret_irq = IRQ_MEM_DMA1; - break; - case CH_MEM_STREAM2_SRC: - case CH_MEM_STREAM2_DEST: - ret_irq = IRQ_MEM_DMA2; - break; - case CH_MEM_STREAM3_SRC: - case CH_MEM_STREAM3_DEST: - ret_irq = IRQ_MEM_DMA3; - break; - - case CH_IMEM_STREAM0_SRC: - case CH_IMEM_STREAM0_DEST: - ret_irq = IRQ_IMEM_DMA0; - break; - case CH_IMEM_STREAM1_SRC: - case CH_IMEM_STREAM1_DEST: - ret_irq = IRQ_IMEM_DMA1; - break; - } - return ret_irq; -} - -# define channel2irq(channel) bf561_channel2irq(channel) - -#endif - /*------------------------------------------------------------------------------ * Request the specific DMA channel from the system. *-----------------------------------------------------------------------------*/ diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 83060f98d15..76bf2cea61d 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -500,8 +500,9 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, cplb_data[i].end, SIZE_4M, cplb_data[i].i_conf); - } else { + } else #endif + { fill_cplbtab(t, cplb_data[i].start, a_start, diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index 76d2c2b8579..0322546aea8 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c new file mode 100644 index 00000000000..c4e40549263 --- /dev/null +++ b/arch/blackfin/mach-bf533/dma.c @@ -0,0 +1,95 @@ +/* + * File: arch/blackfin/mach-bf533/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, +}; + +int bf533_channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPI: + ret_irq = IRQ_SPI; + break; + + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile index f32d44215bb..7e7c9c8ac5b 100644 --- a/arch/blackfin/mach-bf537/Makefile +++ b/arch/blackfin/mach-bf537/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c new file mode 100644 index 00000000000..706cb97b026 --- /dev/null +++ b/arch/blackfin/mach-bf537/dma.c @@ -0,0 +1,115 @@ +/* + * File: arch/blackfin/mach-bf537/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + + case CH_EMAC_RX: + ret_irq = IRQ_MAC_RX; + break; + + case CH_EMAC_TX: + ret_irq = IRQ_MAC_TX; + break; + + case CH_UART1_RX: + ret_irq = IRQ_UART1_RX; + break; + + case CH_UART1_TX: + ret_irq = IRQ_UART1_TX; + break; + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPI: + ret_irq = IRQ_SPI; + break; + + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig new file mode 100644 index 00000000000..b28625e921b --- /dev/null +++ b/arch/blackfin/mach-bf548/Kconfig @@ -0,0 +1,282 @@ +if (BF54x) + +menu "BF548 Specific Configuration" + +comment "Interrupt Priority Assignment" +menu "Priority" + +config IRQ_PLL_WAKEUP + int "IRQ_PLL_WAKEUP" + default 7 +config IRQ_DMAC0_ERR + int "IRQ_DMAC0_ERR" + default 7 +config IRQ_EPPI0_ERR + int "IRQ_EPPI0_ERR" + default 7 +config IRQ_SPORT0_ERR + int "IRQ_SPORT0_ERR" + default 7 +config IRQ_SPORT1_ERR + int "IRQ_SPORT1_ERR" + default 7 +config IRQ_SPI0_ERR + int "IRQ_SPI0_ERR" + default 7 +config IRQ_UART0_ERR + int "IRQ_UART0_ERR" + default 7 +config IRQ_RTC + int "IRQ_RTC" + default 8 +config IRQ_EPPI0 + int "IRQ_EPPI0" + default 8 +config IRQ_SPORT0_RX + int "IRQ_SPORT0_RX" + default 9 +config IRQ_SPORT0_TX + int "IRQ_SPORT0_TX" + default 9 +config IRQ_SPORT1_RX + int "IRQ_SPORT1_RX" + default 9 +config IRQ_SPORT1_TX + int "IRQ_SPORT1_TX" + default 9 +config IRQ_SPI0 + int "IRQ_SPI0" + default 10 +config IRQ_UART0_RX + int "IRQ_UART0_RX" + default 10 +config IRQ_UART0_TX + int "IRQ_UART0_TX" + default 10 +config IRQ_TIMER8 + int "IRQ_TIMER8" + default 11 +config IRQ_TIMER9 + int "IRQ_TIMER9" + default 11 +config IRQ_TIMER10 + int "IRQ_TIMER10" + default 11 +config IRQ_PINT0 + int "IRQ_PINT0" + default 12 +config IRQ_PINT1 + int "IRQ_PINT0" + default 12 +config IRQ_MDMAS0 + int "IRQ_MDMAS0" + default 13 +config IRQ_MDMAS1 + int "IRQ_DMDMAS1" + default 13 +config IRQ_WATCHDOG + int "IRQ_WATCHDOG" + default 13 +config IRQ_DMAC1_ERR + int "IRQ_DMAC1_ERR" + default 7 +config IRQ_SPORT2_ERR + int "IRQ_SPORT2_ERR" + default 7 +config IRQ_SPORT3_ERR + int "IRQ_SPORT3_ERR" + default 7 +config IRQ_MXVR_DATA + int "IRQ MXVR Data" + default 7 +config IRQ_SPI1_ERR + int "IRQ_SPI1_ERR" + default 7 +config IRQ_SPI2_ERR + int "IRQ_SPI2_ERR" + default 7 +config IRQ_UART1_ERR + int "IRQ_UART1_ERR" + default 7 +config IRQ_UART2_ERR + int "IRQ_UART2_ERR" + default 7 +config IRQ_CAN0_ERR + int "IRQ_CAN0_ERR" + default 7 +config IRQ_SPORT2_RX + int "IRQ_SPORT2_RX" + default 9 +config IRQ_SPORT2_TX + int "IRQ_SPORT2_TX" + default 9 +config IRQ_SPORT3_RX + int "IRQ_SPORT3_RX" + default 9 +config IRQ_SPORT3_TX + int "IRQ_SPORT3_TX" + default 9 +config IRQ_EPPI1 + int "IRQ_EPPI1" + default 9 +config IRQ_EPPI2 + int "IRQ_EPPI2" + default 9 +config IRQ_SPI1 + int "IRQ_SPI1" + default 10 +config IRQ_SPI2 + int "IRQ_SPI2" + default 10 +config IRQ_UART1_RX + int "IRQ_UART1_RX" + default 10 +config IRQ_UART1_TX + int "IRQ_UART1_TX" + default 10 +config IRQ_ATAPI_RX + int "IRQ_ATAPI_RX" + default 10 +config IRQ_ATAPI_TX + int "IRQ_ATAPI_TX" + default 10 +config IRQ_TWI0 + int "IRQ_TWI0" + default 11 +config IRQ_TWI1 + int "IRQ_TWI1" + default 11 +config IRQ_CAN0_RX + int "IRQ_CAN_RX" + default 11 +config IRQ_CAN0_TX + int "IRQ_CAN_TX" + default 11 +config IRQ_MDMAS2 + int "IRQ_MDMAS2" + default 13 +config IRQ_MDMAS3 + int "IRQ_DMMAS3" + default 13 +config IRQ_MXVR_ERR + int "IRQ_MXVR_ERR" + default 11 +config IRQ_MXVR_MSG + int "IRQ_MXVR_MSG" + default 11 +config IRQ_MXVR_PKT + int "IRQ_MXVR_PKT" + default 11 +config IRQ_EPPI1_ERR + int "IRQ_EPPI1_ERR" + default 7 +config IRQ_EPPI2_ERR + int "IRQ_EPPI2_ERR" + default 7 +config IRQ_UART3_ERR + int "IRQ_UART3_ERR" + default 7 +config IRQ_HOST_ERR + int "IRQ_HOST_ERR" + default 7 +config IRQ_PIXC_ERR + int "IRQ_PIXC_ERR" + default 7 +config IRQ_NFC_ERR + int "IRQ_NFC_ERR" + default 7 +config IRQ_ATAPI_ERR + int "IRQ_ATAPI_ERR" + default 7 +config IRQ_CAN1_ERR + int "IRQ_CAN1_ERR" + default 7 +config IRQ_HS_DMA_ERR + int "IRQ Handshake DMA Status" + default 7 +config IRQ_PIXC_IN0 + int "IRQ PIXC IN0" + default 8 +config IRQ_PIXC_IN1 + int "IRQ PIXC IN1" + default 8 +config IRQ_PIXC_OUT + int "IRQ PIXC OUT" + default 8 +config IRQ_SDH + int "IRQ SDH" + default 8 +config IRQ_CNT + int "IRQ CNT" + default 8 +config IRQ_KEY + int "IRQ KEY" + default 8 +config IRQ_CAN1_RX + int "IRQ CAN1 RX" + default 11 +config IRQ_CAN1_TX + int "IRQ_CAN1_TX" + default 11 +config IRQ_SDH_MASK0 + int "IRQ_SDH_MASK0" + default 11 +config IRQ_SDH_MASK1 + int "IRQ_SDH_MASK1" + default 11 +config IRQ_USB_INT0 + int "IRQ USB INT0" + default 11 +config IRQ_USB_INT1 + int "IRQ USB INT1" + default 11 +config IRQ_USB_INT2 + int "IRQ USB INT2" + default 11 +config IRQ_USB_DMA + int "IRQ USB DMA" + default 11 +config IRQ_OTPSEC + int "IRQ OPTSEC" + default 11 +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 11 +config IRQ_TIMER1 + int "IRQ_TIMER1" + default 11 +config IRQ_TIMER2 + int "IRQ_TIMER2" + default 11 +config IRQ_TIMER3 + int "IRQ_TIMER3" + default 11 +config IRQ_TIMER4 + int "IRQ_TIMER4" + default 11 +config IRQ_TIMER5 + int "IRQ_TIMER5" + default 11 +config IRQ_TIMER6 + int "IRQ_TIMER6" + default 11 +config IRQ_TIMER7 + int "IRQ_TIMER7" + default 11 +config IRQ_PINT2 + int "IRQ_PIN2" + default 11 +config IRQ_PINT3 + int "IRQ_PIN3" + default 11 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile new file mode 100644 index 00000000000..060ad78ebf1 --- /dev/null +++ b/arch/blackfin/mach-bf548/Makefile @@ -0,0 +1,9 @@ +# +# arch/blackfin/mach-bf537/Makefile +# + +extra-y := head.o + +obj-y := ints-priority.o dma.o gpio.o + +obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile new file mode 100644 index 00000000000..486e07c99a5 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf548/boards/Makefile +# + +obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c new file mode 100644 index 00000000000..100379c4b92 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -0,0 +1,114 @@ +/* + * File: arch/blackfin/mach-bf548/boards/ezkit.c + * Based on: arch/blackfin/mach-bf537/boards/ezkit.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/bfin5xx_spi.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "ADSP-BF548-EZKIT"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +static struct platform_device *ezkit_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + return 0; +} + +arch_initcall(stamp_init); diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S new file mode 100644 index 00000000000..f47daf3770d --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/led.S @@ -0,0 +1,172 @@ +/**************************************************** + * LED1 ---- PG6 LED2 ---- PG7 * + * LED3 ---- PG8 LED4 ---- PG9 * + * LED5 ---- PG10 LED6 ---- PG11 * + ****************************************************/ + +#include <linux/linkage.h> +#include <asm/blackfin.h> + +/* All functions in this file save the registers they uses. + So there is no need to save any registers before calling them. */ + + .text; + +/* Initialize LEDs. */ + +ENTRY(_led_init) + LINK 0; + [--SP] = P0; + [--SP] = R0; + [--SP] = R1; + [--SP] = R2; + R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z); + R2 = ~R1; + + P0.H = hi(PORTG_FER); + P0.L = lo(PORTG_FER); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R2; + W[P0] = R0.L; + SSYNC; + + P0.H = hi(PORTG_DIR_SET); + P0.L = lo(PORTG_DIR_SET); + W[P0] = R1.L; + SSYNC; + + P0.H = hi(PORTG_INEN); + P0.L = lo(PORTG_INEN); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R2; + W[P0] = R0.L; + SSYNC; + + R2 = [SP++]; + R1 = [SP++]; + R0 = [SP++]; + P0 = [SP++]; + RTS; + .size _led_init, .-_led_init + +/* Set one LED on. Leave other LEDs unchanged. + It expects the LED number passed through R0. */ + +ENTRY(_led_on) + LINK 0; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTG_SET); + P0.L = lo(PORTG_SET); + W[P0] = R1.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_on, .-_led_on + +/* Set one LED off. Leave other LEDs unchanged. */ + +ENTRY(_led_off) + LINK 0; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTG_CLEAR); + P0.L = lo(PORTG_CLEAR); + W[P0] = R1.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_off, .-_led_off + +/* Toggle one LED. Leave other LEDs unchanged. */ + +ENTRY(_led_toggle) + LINK 0; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTG); + P0.L = lo(PORTG); + R0 = W[P0](Z); + SSYNC; + R0 = R0 ^ R1; + W[P0] = R0.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_toggle, .-_led_toggle + +/* Display the number using LEDs in binary format. */ + +ENTRY(_led_disp_num) + LINK 0; + [--SP] = P0; + [--SP] = R1; + [--SP] = R2; + CALL _led_init; + R1 = 0x3f(X); + R0 = R0 & R1; + R2 = 6(X); + R0 <<= R2; + R1 <<= R2; + P0.H = hi(PORTG); + P0.L = lo(PORTG); + R2 = W[P0](Z); + SSYNC; + R1 = ~R1; + R2 = R2 & R1; + R2 = R2 | R0; + W[P0] = R2.L; + SSYNC; + R2 = [SP++]; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_disp_num, .-_led_disp_num + +/* Toggle the number using LEDs in binary format. */ + +ENTRY(_led_toggle_num) + LINK 0; + [--SP] = P0; + [--SP] = R1; + [--SP] = R2; + CALL _led_init; + R1 = 0x3f(X); + R0 = R0 & R1; + R1 = 6(X); + R0 <<= R1; + P0.H = hi(PORTG); + P0.L = lo(PORTG); + R1 = W[P0](Z); + SSYNC; + R1 = R1 ^ R0; + W[P0] = R1.L; + SSYNC; + R2 = [SP++]; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_toggle_num, .-_led_toggle_num + diff --git a/arch/blackfin/mach-bf548/cpu.c b/arch/blackfin/mach-bf548/cpu.c new file mode 100644 index 00000000000..4298a3ccfbf --- /dev/null +++ b/arch/blackfin/mach-bf548/cpu.c @@ -0,0 +1,159 @@ +/* + * File: arch/blackfin/mach-bf548/cpu.c + * Based on: + * Author: + * + * Created: + * Description: clock scaling for the bf54x + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <asm/dpmc.h> +#include <linux/fs.h> +#include <asm/bfin-global.h> + +/* CONFIG_CLKIN_HZ=25000000 */ +#define VCO5 (CONFIG_CLKIN_HZ*45) +#define VCO4 (CONFIG_CLKIN_HZ*36) +#define VCO3 (CONFIG_CLKIN_HZ*27) +#define VCO2 (CONFIG_CLKIN_HZ*18) +#define VCO1 (CONFIG_CLKIN_HZ*9) +#define VCO(x) VCO##x + +#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} +/* frequency */ +static struct cpufreq_frequency_table bf548_freq_table[] = { + MFREQ(1), + MFREQ(3), + {VCO4, VCO4 / 2}, {VCO4, VCO4}, + MFREQ(5), + {0, CPUFREQ_TABLE_END}, +}; + +/* + * dpmc_fops->ioctl() + * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) + */ +static int bf548_getfreq(unsigned int cpu) +{ + unsigned long cclk_mhz; + + /* The driver only support single cpu */ + if (cpu == 0) + dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); + else + cclk_mhz = -1; + + return cclk_mhz; +} + +static int bf548_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned long cclk_mhz; + unsigned long vco_mhz; + unsigned long flags; + unsigned int index; + struct cpufreq_freqs freqs; + + if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index)) + return -EINVAL; + + cclk_mhz = bf548_freq_table[index].frequency; + vco_mhz = bf548_freq_table[index].index; + + dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); + freqs.old = bf548_getfreq(0); + freqs.new = cclk_mhz; + freqs.cpu = 0; + + pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", + cclk_mhz, vco_mhz, index, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); + local_irq_restore(flags); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + vco_mhz = get_vco(); + cclk_mhz = get_cclk(); + return 0; +} + +/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on + * this platform, anyway. + */ +static int bf548_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &bf548_freq_table); +} + +static int __init __bf548_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + /*Now ,only support one cpu */ + policy->cur = bf548_getfreq(0); + cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table); +} + +static struct freq_attr *bf548_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bf548_driver = { + .verify = bf548_verify_speed, + .target = bf548_target, + .get = bf548_getfreq, + .init = __bf548_cpu_init, + .name = "bf548", + .owner = THIS_MODULE, + .attr = bf548_freq_attr, +}; + +static int __init bf548_cpu_init(void) +{ + return cpufreq_register_driver(&bf548_driver); +} + +static void __exit bf548_cpu_exit(void) +{ + cpufreq_unregister_driver(&bf548_driver); +} + +MODULE_AUTHOR("Mickael Kang"); +MODULE_DESCRIPTION("cpufreq driver for BF548 CPU"); +MODULE_LICENSE("GPL"); + +module_init(bf548_cpu_init); +module_exit(bf548_cpu_exit); diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c new file mode 100644 index 00000000000..a8184113be4 --- /dev/null +++ b/arch/blackfin/mach-bf548/dma.c @@ -0,0 +1,156 @@ +/* + * File: arch/blackfin/mach-bf561/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <asm/blackfin.h> +#include <asm/dma.h> + + struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) DMA12_NEXT_DESC_PTR, + (struct dma_register *) DMA13_NEXT_DESC_PTR, + (struct dma_register *) DMA14_NEXT_DESC_PTR, + (struct dma_register *) DMA15_NEXT_DESC_PTR, + (struct dma_register *) DMA16_NEXT_DESC_PTR, + (struct dma_register *) DMA17_NEXT_DESC_PTR, + (struct dma_register *) DMA18_NEXT_DESC_PTR, + (struct dma_register *) DMA19_NEXT_DESC_PTR, + (struct dma_register *) DMA20_NEXT_DESC_PTR, + (struct dma_register *) DMA21_NEXT_DESC_PTR, + (struct dma_register *) DMA22_NEXT_DESC_PTR, + (struct dma_register *) DMA23_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D2_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S2_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D3_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S3_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + case CH_SPI0: + ret_irq = IRQ_SPI0; + break; + case CH_SPI1: + ret_irq = IRQ_SPI1; + break; + case CH_UART0_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART0_TX: + ret_irq = IRQ_UART_TX; + break; + case CH_UART1_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART1_TX: + ret_irq = IRQ_UART_TX; + break; + case CH_EPPI0: + ret_irq = IRQ_EPPI0; + break; + case CH_EPPI1: + ret_irq = IRQ_EPPI1; + break; + case CH_EPPI2: + ret_irq = IRQ_EPPI2; + break; + case CH_PIXC_IMAGE: + ret_irq = IRQ_PIXC_IN0; + break; + case CH_PIXC_OVERLAY: + ret_irq = IRQ_PIXC_IN1; + break; + case CH_PIXC_OUTPUT: + ret_irq = IRQ_PIXC_OUT; + break; + case CH_SPORT2_RX: + ret_irq = IRQ_SPORT2_RX; + break; + case CH_SPORT2_TX: + ret_irq = IRQ_SPORT2_TX; + break; + case CH_SPORT3_RX: + ret_irq = IRQ_SPORT3_RX; + break; + case CH_SPORT3_TX: + ret_irq = IRQ_SPORT3_TX; + break; + case CH_SDH: + ret_irq = IRQ_SDH; + break; + case CH_SPI2: + ret_irq = IRQ_SPI2; + break; + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MDMAS0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MDMAS1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MDMAS2; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MDMAS3; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c new file mode 100644 index 00000000000..854896d6ced --- /dev/null +++ b/arch/blackfin/mach-bf548/gpio.c @@ -0,0 +1,175 @@ +/* + * File: arch/blackfin/mach-bf548/gpio.c + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: GPIO Abstraction Layer + * + * Modified: + * Copyright 2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <asm/blackfin.h> +#include <asm/gpio.h> +#include <linux/irq.h> + +static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *) PORTA_FER, + (struct gpio_port_t *) PORTB_FER, + (struct gpio_port_t *) PORTC_FER, + (struct gpio_port_t *) PORTD_FER, + (struct gpio_port_t *) PORTE_FER, + (struct gpio_port_t *) PORTF_FER, + (struct gpio_port_t *) PORTG_FER, + (struct gpio_port_t *) PORTH_FER, + (struct gpio_port_t *) PORTI_FER, + (struct gpio_port_t *) PORTJ_FER, +}; + +static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +inline int check_gpio(unsigned short gpio) +{ + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 \ + || gpio == GPIO_PH14 || gpio == GPIO_PH15 \ + || gpio > MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} + +static void port_setup(unsigned short gpio, unsigned short usage) +{ + if (usage == GPIO_USAGE) { + if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio)) + printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral " + "usage and GPIO %d detected!\n", gpio); + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + } else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); + SSYNC(); +} + +static int __init bfin_gpio_init(void) +{ + int i; + + printk(KERN_INFO "Blackfin GPIO Controller\n"); + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) + reserved_map[gpio_bank(i)] = 0; + + return 0; +} + +arch_initcall(bfin_gpio_init); + + +/*********************************************************** +* +* FUNCTIONS: Blackfin GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: Blackfin GPIO Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int gpio_request(unsigned short gpio, const char *label) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + local_irq_save(flags); + + if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio); + + local_irq_restore(flags); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} +EXPORT_SYMBOL(gpio_request); + + +void gpio_free(unsigned short gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return; + + local_irq_save(flags); + + if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return; + } + + reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_free); + + +void gpio_direction_input(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_input); + +void gpio_direction_output(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_output); diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S new file mode 100644 index 00000000000..0e1a2544739 --- /dev/null +++ b/arch/blackfin/mach-bf548/head.S @@ -0,0 +1,507 @@ +/* + * File: arch/blackfin/mach-bf548/head.S + * Based on: arch/blackfin/mach-bf537/head.S + * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne + * + * Created: 1998 + * Description: Startup code for Blackfin BF548 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/linkage.h> +#include <asm/blackfin.h> +#if CONFIG_BFIN_KERNEL_CLOCK +#include <asm/mach/mem_init.h> +#endif + +.global __rambase +.global __ramstart +.global __ramend +.extern ___bss_stop +.extern ___bss_start +.extern _bf53x_relocate_l1_mem + +#define INITIAL_STACK 0xFFB01000 + +.text + +ENTRY(__start) +ENTRY(__stext) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Set the SYSCFG register */ + R0 = 0x36; + SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + R0 = 0; + + /* Clear Out All the data and pointer Registers*/ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers*/ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + /* Turn off the icache */ + p0.l = (IMEM_CONTROL & 0xFFFF); + p0.h = (IMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Turn off the dcache */ + p0.l = (DMEM_CONTROL & 0xFFFF); + p0.h = (DMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Initialize stack pointer */ + SP.L = LO(INITIAL_STACK); + SP.H = HI(INITIAL_STACK); + FP = SP; + USP = SP; + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#if CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + /* Code for initializing Async memory banks */ + + p2.h = hi(EBIU_AMBCTL1); + p2.l = lo(EBIU_AMBCTL1); + r0.h = hi(AMBCTL1VAL); + r0.l = lo(AMBCTL1VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMBCTL0); + p2.l = lo(EBIU_AMBCTL0); + r0.h = hi(AMBCTL0VAL); + r0.l = lo(AMBCTL0VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMGCTL); + p2.l = lo(EBIU_AMGCTL); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if defined (ANOMALY_05000281) + nop; + nop; + nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; + +ENTRY(_real_start) + [ -- sp ] = reti; + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; /* watchdog off for now */ + ssync; + + /* Code update for BSS size == 0 + * Zero out the bss region. + */ + + p1.l = ___bss_start; + p1.h = ___bss_start; + p2.l = ___bss_stop; + p2.h = ___bss_stop; + r0 = 0; + p2 -= p1; + lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; +.L_clear_bss: + B[p1++] = r0; + + /* In case there is a NULL pointer reference + * Zero out region before stext + */ + + p1.l = 0x0; + p1.h = 0x0; + r0.l = __stext; + r0.h = __stext; + r0 = r0 >> 1; + p2 = r0; + r0 = 0; + lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; +.L_clear_zero: + W[p1++] = r0; + + /* pass the uboot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + p1.l = __rambase; + p1.h = __rambase; + r0.l = __sdata; + r0.h = __sdata; + [p1] = r0; + + p1.l = __ramstart; + p1.h = __ramstart; + p3.l = ___bss_stop; + p3.h = ___bss_stop; + + r1 = p3; + [p1] = r1; + + + /* + * load the current thread pointer and stack + */ + r1.l = _init_thread_union; + r1.h = _init_thread_union; + + r2.l = 0x2000; + r2.h = 0x0000; + r1 = r1 + r2; + sp = r1; + usp = sp; + fp = sp; + call _start_kernel; +.L_exit: + jump.s .L_exit; + +.section .l1.text +#if CONFIG_BFIN_KERNEL_CLOCK +ENTRY(_start_dma_code) + + /* Enable PHY CLK buffer output */ + p0.h = hi(VR_CTL); + p0.l = lo(VR_CTL); + r0.l = w[p0]; + bitset(r0, 14); + w[p0] = r0.l; + ssync; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + r0.h = 0x0; + [p0] = r0; + SSYNC; + + /* + * Set PLL_CTL + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +.Lcheck_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump .Lcheck_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump .Lskip; + NOP; + BITSET (R0, 23); +.Lskip: + [P2] = R0; + SSYNC; + + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + R1 = [p2]; + R1 = R1 | R0; + [P2] = R1; + SSYNC; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = lo(IWR_ENABLE_ALL); + r0.h = hi(IWR_ENABLE_ALL); + [p0] = r0; + SSYNC; + + RTS; +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +ENTRY(_bfin_reset) + /* No more interrupts to be handled*/ + CLI R6; + SSYNC; + +#if defined(CONFIG_MTD_M25P80) +/* + * The following code fix the SPI flash reboot issue, + * /CS signal of the chip which is using PF10 return to GPIO mode + */ + p0.h = hi(PORTF_FER); + p0.l = lo(PORTF_FER); + r0.l = 0x0000; + w[p0] = r0.l; + SSYNC; + +/* /CS return to high */ + p0.h = hi(PORTFIO); + p0.l = lo(PORTFIO); + r0.l = 0xFFFF; + w[p0] = r0.l; + SSYNC; + +/* Delay some time, This is necessary */ + r1.h = 0; + r1.l = 0x400; + p1 = r1; + lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; +_delay_lab1: + r0.h = 0; + r0.l = 0x8000; + p0 = r0; + lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; +_delay_lab0: + nop; +_delay_lab0_end: + nop; +_delay_lab1_end: + nop; +#endif + + /* Clear the bits 13-15 in SWRST if they werent cleared */ + p0.h = hi(SWRST); + p0.l = lo(SWRST); + csync; + r0.l = w[p0]; + + /* Clear the IMASK register */ + p0.h = hi(IMASK); + p0.l = lo(IMASK); + r0 = 0x0; + [p0] = r0; + + /* Clear the ILAT register */ + p0.h = hi(ILAT); + p0.l = lo(ILAT); + r0 = [p0]; + [p0] = r0; + SSYNC; + + /* Disable the WDOG TIMER */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0xAD6; + w[p0] = r0.l; + SSYNC; + + /* Clear the sticky bit incase it is already set */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0x8AD6; + w[p0] = r0.l; + SSYNC; + + /* Program the count value */ + R0.l = 0x100; + R0.h = 0x0; + P0.h = hi(WDOG_CNT); + P0.l = lo(WDOG_CNT); + [P0] = R0; + SSYNC; + + /* Program WDOG_STAT if necessary */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + CC = BITTST(R0,1); + if !CC JUMP .LWRITESTAT; + CC = BITTST(R0,2); + if !CC JUMP .LWRITESTAT; + JUMP .LSKIP_WRITE; + +.LWRITESTAT: + /* When watch dog timer is enabled, + * a write to STAT will load the contents of CNT to STAT + */ + R0 = 0x0000(z); + P0.h = hi(WDOG_STAT); + P0.l = lo(WDOG_STAT) + [P0] = R0; + SSYNC; + +.LSKIP_WRITE: + /* Enable the reset event */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + BITCLR(R0,1); + BITCLR(R0,2); + W[P0] = R0.L; + SSYNC; + NOP; + + /* Enable the wdog counter */ + R0 = W[P0](Z); + BITCLR(R0,4); + W[P0] = R0.L; + SSYNC; + + IDLE; + + RTS; + +.data + +/* + * Set up the usable of RAM stuff. Size of RAM is determined then + * an initial stack set up at the end. + */ + +.align 4 +__rambase: +.long 0 +__ramstart: +.long 0 +__ramend: +.long 0 diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c new file mode 100644 index 00000000000..dde450f119e --- /dev/null +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -0,0 +1,137 @@ +/* + * File: arch/blackfin/mach-bf537/ints-priority.c + * Based on: arch/blackfin/mach-bf533/ints-priority.c + * Author: Michael Hennerich + * + * Created: + * Description: Set up the interupt priorities + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <asm/blackfin.h> +#include <asm/irq.h> + +void program_IAR(void) +{ + /* Program the IAR0 Register with the configured priority */ + bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | + ((CONFIG_IRQ_DMAC0_ERR - 7) << IRQ_DMAC0_ERR_POS) | + ((CONFIG_IRQ_EPPI0_ERR - 7) << IRQ_EPPI0_ERR_POS) | + ((CONFIG_IRQ_SPORT0_ERR - 7) << IRQ_SPORT0_ERR_POS) | + ((CONFIG_IRQ_SPORT1_ERR - 7) << IRQ_SPORT1_ERR_POS) | + ((CONFIG_IRQ_SPI0_ERR - 7) << IRQ_SPI0_ERR_POS) | + ((CONFIG_IRQ_UART0_ERR - 7) << IRQ_UART0_ERR_POS) | + ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS)); + + bfin_write_SIC_IAR1(((CONFIG_IRQ_EPPI0 - 7) << IRQ_EPPI0_POS) | + ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) | + ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) | + ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) | + ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) | + ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) | + ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) | + ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS)); + + bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) | + ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) | + ((CONFIG_IRQ_PINT0 - 7) << IRQ_PINT0_POS) | + ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) | + ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) | + ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) | + ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS)); + + bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) | + ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) | + ((CONFIG_IRQ_SPORT3_ERR - 7) << IRQ_SPORT3_ERR_POS) | + ((CONFIG_IRQ_MXVR_DATA - 7) << IRQ_MXVR_DATA_POS) | + ((CONFIG_IRQ_SPI1_ERR - 7) << IRQ_SPI1_ERR_POS) | + ((CONFIG_IRQ_SPI2_ERR - 7) << IRQ_SPI2_ERR_POS) | + ((CONFIG_IRQ_UART1_ERR - 7) << IRQ_UART1_ERR_POS) | + ((CONFIG_IRQ_UART2_ERR - 7) << IRQ_UART2_ERR_POS)); + + bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN0_ERR - 7) << IRQ_CAN0_ERR_POS) | + ((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) | + ((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) | + ((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) | + ((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) | + ((CONFIG_IRQ_EPPI1 - 7) << IRQ_EPPI1_POS) | + ((CONFIG_IRQ_EPPI2 - 7) << IRQ_EPPI2_POS) | + ((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS)); + + bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) | + ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) | + ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) | + ((CONFIG_IRQ_ATAPI_RX - 7) << IRQ_ATAPI_RX_POS) | + ((CONFIG_IRQ_ATAPI_TX - 7) << IRQ_ATAPI_TX_POS) | + ((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) | + ((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) | + ((CONFIG_IRQ_CAN0_RX - 7) << IRQ_CAN0_RX_POS)); + + bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN0_TX - 7) << IRQ_CAN0_TX_POS) | + ((CONFIG_IRQ_MDMAS2 - 7) << IRQ_MDMAS2_POS) | + ((CONFIG_IRQ_MDMAS3 - 7) << IRQ_MDMAS3_POS) | + ((CONFIG_IRQ_MXVR_ERR - 7) << IRQ_MXVR_ERR_POS) | + ((CONFIG_IRQ_MXVR_MSG - 7) << IRQ_MXVR_MSG_POS) | + ((CONFIG_IRQ_MXVR_PKT - 7) << IRQ_MXVR_PKT_POS) | + ((CONFIG_IRQ_EPPI1_ERR - 7) << IRQ_EPPI1_ERR_POS) | + ((CONFIG_IRQ_EPPI2_ERR - 7) << IRQ_EPPI2_ERR_POS)); + + bfin_write_SIC_IAR7(((CONFIG_IRQ_UART3_ERR - 7) << IRQ_UART3_ERR_POS) | + ((CONFIG_IRQ_HOST_ERR - 7) << IRQ_HOST_ERR_POS) | + ((CONFIG_IRQ_PIXC_ERR - 7) << IRQ_PIXC_ERR_POS) | + ((CONFIG_IRQ_NFC_ERR - 7) << IRQ_NFC_ERR_POS) | + ((CONFIG_IRQ_ATAPI_ERR - 7) << IRQ_ATAPI_ERR_POS) | + ((CONFIG_IRQ_CAN1_ERR - 7) << IRQ_CAN1_ERR_POS) | + ((CONFIG_IRQ_HS_DMA_ERR - 7) << IRQ_HS_DMA_ERR_POS)); + + bfin_write_SIC_IAR8(((CONFIG_IRQ_PIXC_IN0 - 7) << IRQ_PIXC_IN1_POS) | + ((CONFIG_IRQ_PIXC_IN1 - 7) << IRQ_PIXC_IN1_POS) | + ((CONFIG_IRQ_PIXC_OUT - 7) << IRQ_PIXC_OUT_POS) | + ((CONFIG_IRQ_SDH - 7) << IRQ_SDH_POS) | + ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) | + ((CONFIG_IRQ_KEY - 7) << IRQ_KEY_POS) | + ((CONFIG_IRQ_CAN1_RX - 7) << IRQ_CAN1_RX_POS) | + ((CONFIG_IRQ_CAN1_TX - 7) << IRQ_CAN1_TX_POS)); + + bfin_write_SIC_IAR9(((CONFIG_IRQ_SDH_MASK0 - 7) << IRQ_SDH_MASK0_POS) | + ((CONFIG_IRQ_SDH_MASK1 - 7) << IRQ_SDH_MASK1_POS) | + ((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) | + ((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) | + ((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) | + ((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS) | + ((CONFIG_IRQ_OTPSEC - 7) << IRQ_OTPSEC_POS)); + + bfin_write_SIC_IAR10(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS)); + + bfin_write_SIC_IAR11(((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | + ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) | + ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | + ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | + ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) | + ((CONFIG_IRQ_PINT2 - 7) << IRQ_PINT2_POS) | + ((CONFIG_IRQ_PINT3 - 7) << IRQ_PINT3_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile index 57f475a5516..f39235a5578 100644 --- a/arch/blackfin/mach-bf561/Makefile +++ b/arch/blackfin/mach-bf561/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_BF561_COREB) += coreb.o diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c new file mode 100644 index 00000000000..89c65bb0bed --- /dev/null +++ b/arch/blackfin/mach-bf561/dma.c @@ -0,0 +1,131 @@ +/* + * File: arch/blackfin/mach-bf561/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA1_0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_1_NEXT_DESC_PTR, + (struct dma_register *) DMA1_2_NEXT_DESC_PTR, + (struct dma_register *) DMA1_3_NEXT_DESC_PTR, + (struct dma_register *) DMA1_4_NEXT_DESC_PTR, + (struct dma_register *) DMA1_5_NEXT_DESC_PTR, + (struct dma_register *) DMA1_6_NEXT_DESC_PTR, + (struct dma_register *) DMA1_7_NEXT_DESC_PTR, + (struct dma_register *) DMA1_8_NEXT_DESC_PTR, + (struct dma_register *) DMA1_9_NEXT_DESC_PTR, + (struct dma_register *) DMA1_10_NEXT_DESC_PTR, + (struct dma_register *) DMA1_11_NEXT_DESC_PTR, + (struct dma_register *) DMA2_0_NEXT_DESC_PTR, + (struct dma_register *) DMA2_1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_2_NEXT_DESC_PTR, + (struct dma_register *) DMA2_3_NEXT_DESC_PTR, + (struct dma_register *) DMA2_4_NEXT_DESC_PTR, + (struct dma_register *) DMA2_5_NEXT_DESC_PTR, + (struct dma_register *) DMA2_6_NEXT_DESC_PTR, + (struct dma_register *) DMA2_7_NEXT_DESC_PTR, + (struct dma_register *) DMA2_8_NEXT_DESC_PTR, + (struct dma_register *) DMA2_9_NEXT_DESC_PTR, + (struct dma_register *) DMA2_10_NEXT_DESC_PTR, + (struct dma_register *) DMA2_11_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, +}; + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI0: + ret_irq = IRQ_PPI0; + break; + case CH_PPI1: + ret_irq = IRQ_PPI1; + break; + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + case CH_SPI: + ret_irq = IRQ_SPI; + break; + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MEM_DMA2; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MEM_DMA3; + break; + + case CH_IMEM_STREAM0_SRC: + case CH_IMEM_STREAM0_DEST: + ret_irq = IRQ_IMEM_DMA0; + break; + case CH_IMEM_STREAM1_SRC: + case CH_IMEM_STREAM1_DEST: + ret_irq = IRQ_IMEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index d3a49073d19..0279ede7039 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,9 +4,9 @@ obj-y := \ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ - interrupt.o lock.o dpmc.o irqpanic.o + interrupt.o lock.o irqpanic.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += pm.o dpmc.o diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 2cfc7d5aec5..cec0f841fb5 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -13,7 +13,7 @@ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> * 2003 Metrowerks/Motorola * 2003 Bas Vermeulen <bas@buyways.nl> - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -65,9 +65,9 @@ atomic_t num_spurious; struct ivgx { /* irq number for request_irq, available in mach-bf533/irq.h */ - int irqno; + unsigned int irqno; /* corresponding bit in the SIC_ISR register */ - int isrflag; + unsigned int isrflag; } ivg_table[NR_PERI_INTS]; struct ivg_slice { @@ -98,7 +98,7 @@ static void __init search_IAR(void) bfin_read32((unsigned long *) SIC_IAR0 + (irqn >> 3)) >> iar_shift)) { ivg_table[irq_pos].irqno = IVG7 + irqn; - ivg_table[irq_pos].isrflag = 1 << irqn; + ivg_table[irq_pos].isrflag = 1 << (irqn % 32); ivg7_13[ivg].istop++; irq_pos++; } @@ -141,15 +141,31 @@ static void bfin_core_unmask_irq(unsigned int irq) static void bfin_internal_mask_irq(unsigned int irq) { +#ifndef CONFIG_BF54x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << (irq - (IRQ_CORETMR + 1)))); +#else + unsigned mask_bank, mask_bit; + mask_bank = (irq - (IRQ_CORETMR +1))/32; + mask_bit = (irq - (IRQ_CORETMR + 1))%32; + bfin_write_SIC_IMASK( mask_bank, bfin_read_SIC_IMASK(mask_bank) & \ + ~(1 << mask_bit)); +#endif SSYNC(); } static void bfin_internal_unmask_irq(unsigned int irq) { +#ifndef CONFIG_BF54x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << (irq - (IRQ_CORETMR + 1)))); +#else + unsigned mask_bank, mask_bit; + mask_bank = (irq - (IRQ_CORETMR +1))/32; + mask_bit = (irq - (IRQ_CORETMR + 1))%32; + bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | \ + ( 1 << mask_bit)); +#endif SSYNC(); } @@ -452,7 +468,14 @@ int __init init_arch_irq(void) int irq; unsigned long ilat = 0; /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ +#ifdef CONFIG_BF54x + bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); + bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); + bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); +#else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); +#endif + SSYNC(); local_irq_disable(); @@ -555,9 +578,25 @@ void do_irq(int vec, struct pt_regs *fp) } else { struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; - unsigned long sic_status; +#ifdef CONFIG_BF54x + unsigned long sic_status[3]; SSYNC(); + sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0); + sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1); + sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2); + SSYNC(); + for(;; ivg++) { + if (ivg >= ivg_stop) { + atomic_inc(&num_spurious); + return; + } + if (sic_status[(ivg->irqno - IVG7)/32] & ivg->isrflag) + break; + } +#else + unsigned long sic_status; + SSYNC(); sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); for (;; ivg++) { @@ -567,6 +606,7 @@ void do_irq(int vec, struct pt_regs *fp) } else if (sic_status & ivg->isrflag) break; } +#endif vec = ivg->irqno; } asm_do_IRQ(vec, fp); diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index d98d77ad71f..bc0cca02850 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -204,6 +204,10 @@ #endif +#ifdef BF548_FAMILY +#include <asm-blackfin/mach-bf548/gpio.h> +#endif + #ifdef BF561_FAMILY #define MAX_BLACKFIN_GPIOS 48 #define PORT_FIO0 GPIO_0 @@ -264,6 +268,7 @@ unsigned short get_gpiop_maska(unsigned short); unsigned short get_gpiop_maskb(unsigned short); unsigned short get_gpiop_data(unsigned short); +#ifndef BF548_FAMILY struct gpio_port_t { unsigned short data; unsigned short dummy1; @@ -299,6 +304,7 @@ struct gpio_port_t { unsigned short dummy16; unsigned short inen; }; +#endif #ifdef CONFIG_PM #define PM_WAKE_RISING 0x1 diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h index bd9d5e94307..16c672c01d8 100644 --- a/include/asm-blackfin/mach-bf533/dma.h +++ b/include/asm-blackfin/mach-bf533/dma.h @@ -51,4 +51,7 @@ #define CH_MEM_STREAM1_DEST 10 /* TX */ #define CH_MEM_STREAM1_SRC 11 /* RX */ +extern int channel2irq(unsigned int channel); +extern struct dma_register *base_addr[]; + #endif diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h index 7a964040870..021991984e6 100644 --- a/include/asm-blackfin/mach-bf537/dma.h +++ b/include/asm-blackfin/mach-bf537/dma.h @@ -52,4 +52,7 @@ #define CH_MEM_STREAM1_DEST 14 /* TX */ #define CH_MEM_STREAM1_SRC 15 /* RX */ +extern int channel2irq(unsigned int channel); +extern struct dma_register *base_addr[]; + #endif diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index ddc150e6fb0..aca1d4ba145 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -47,6 +47,8 @@ SPORT external receive and transmit clocks. */ #define ANOMALY_05000272 /* Certain data cache write through modes fail for VDDint <=0.9V */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ #define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h index 0b211020443..163c79e3d23 100644 --- a/include/asm-blackfin/mach-bf548/bf548.h +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -30,6 +30,8 @@ #ifndef __MACH_BF548_H__ #define __MACH_BF548_H__ +#define SUPPORTED_REVID 0 + /* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ #define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 8f5d9c4d8d5..2f4afc90db1 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -1,34 +1,35 @@ #include <linux/serial.h> #include <asm/dma.h> -#define NR_PORTS 2 +#define NR_PORTS 4 -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ #define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ #define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_GCTL 0x08 /* Global Control Register */ #define OFFSET_LCR 0x0C /* Line Control Register */ #define OFFSET_MCR 0x10 /* Modem Control Register */ #define OFFSET_LSR 0x14 /* Line Status Register */ #define OFFSET_MSR 0x18 /* Modem Status Register */ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ +#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ +#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ +#define OFFSET_THR 0x28 /* Transmit Holding register */ +#define OFFSET_RBR 0x2C /* Receive Buffer register */ #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) -#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) -#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER_SET)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) #define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) -#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v) +#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) @@ -112,9 +113,29 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + 0xFFC02100, + IRQ_UART2_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART2_TX, + CH_UART2_RX, +#endif +#ifdef CONFIG_BFIN_UART2_CTSRTS + CONFIG_UART2_CTS_PIN, + CONFIG_UART2_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + { + 0xFFC03100, + IRQ_UART3_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART3_TX, + CH_UART3_RX, #endif }, #endif @@ -124,15 +145,40 @@ int nr_ports = ARRAY_SIZE(bfin_serial_resource); static void bfin_serial_hw_init(struct bfin_serial_port *uart) { - unsigned short val; - val = bfin_read16(BFIN_PORT_MUX); - val &= ~(PFDE | PFTE); - bfin_write16(BFIN_PORT_MUX, val); +#ifdef CONFIG_SERIAL_BFIN_UART0 + /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */ + bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER()); + bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX()); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART1 + /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */ + bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER()); + bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX()); +#ifdef CONFIG_BFIN_UART1_CTSRTS + /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */ + bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER()); + bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX()); +#endif +#endif - val = bfin_read16(PORTF_FER); - val |= 0xF; - bfin_write16(PORTF_FER, val); +#ifdef CONFIG_SERIAL_BFIN_UART2 + /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */ + bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER()); + bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX()); +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */ + bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER()); + bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX()); +#ifdef CONFIG_BFIN_UART3_CTSRTS + /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */ + bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER()); + bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX()); +#endif +#endif + SSYNC(); #ifdef CONFIG_SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) { gpio_request(uart->cts_pin, NULL); diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h index 094c41a6319..791218fe7d9 100644 --- a/include/asm-blackfin/mach-bf548/blackfin.h +++ b/include/asm-blackfin/mach-bf548/blackfin.h @@ -34,24 +34,26 @@ #define BF548_FAMILY +#include "bf548.h" +#include "mem_map.h" +#include "anomaly.h" + #ifdef CONFIG_BF542 -#include "bf542.h" +#include "defBF542.h" +#endif #ifdef CONFIG_BF544 -#include "bf544.h" +#include "defBF544.h" #endif #ifdef CONFIG_BF548 -#include "bf548.h" +#include "defBF548.h" #endif #ifdef CONFIG_BF549 -#include "bf549.h" +#include "defBF549.h" #endif -#include "mem_map.h" -#include "anomaly.h" - #if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) #ifdef CONFIG_BF542 #include "cdefBF542.h" diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index 6bbcefeb362..b1338000e27 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -31,7 +31,7 @@ #ifndef _CDEF_BF54X_H #define _CDEF_BF54X_H -#include <defBF54x_base.h> +#include "defBF54x_base.h" /* ************************************************************** */ /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */ @@ -70,12 +70,18 @@ #define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) #define bfin_read_SIC_IMASK2() bfin_read32(SIC_IMASK2) #define bfin_write_SIC_IMASK2(val) bfin_write32(SIC_IMASK2, val) +#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 2)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 2)), val) + #define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) #define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) #define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) #define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) #define bfin_read_SIC_ISR2() bfin_read32(SIC_ISR2) #define bfin_write_SIC_ISR2(val) bfin_write32(SIC_ISR2, val) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 2)) +#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 2)), val) + #define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) #define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) #define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) @@ -710,21 +716,21 @@ #define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) #define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR) #define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) -#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) #define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) #define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) #define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) #define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) #define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) -#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) #define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) #define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) #define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) -#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) #define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) -#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val) #define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) -#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val) #define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) #define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) #define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) @@ -734,23 +740,23 @@ #define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) #define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) #define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) -#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val) #define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) -#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val) #define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) #define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) #define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) #define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) #define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) -#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) #define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) #define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) #define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) -#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) #define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) -#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val) #define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) -#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val) #define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) #define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) #define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) @@ -763,9 +769,9 @@ /* MDMA Stream 1 Registers */ #define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) -#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) -#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val) #define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) #define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) #define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) @@ -777,9 +783,9 @@ #define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) #define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY) #define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) -#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) #define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) -#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val) #define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) #define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) #define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) @@ -789,9 +795,9 @@ #define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) #define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) #define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) -#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val) #define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) -#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val) #define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) #define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) #define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) @@ -803,9 +809,9 @@ #define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) #define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY) #define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) -#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) #define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) -#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val) #define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) #define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) #define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h index ac968fca5cc..32d07130200 100644 --- a/include/asm-blackfin/mach-bf548/defBF542.h +++ b/include/asm-blackfin/mach-bf548/defBF542.h @@ -362,7 +362,6 @@ /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ -#define nKPAD_EN 0x0 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ #define KPAD_ROWEN 0x1c00 /* Row Enable Width */ #define KPAD_COLEN 0xe000 /* Column Enable Width */ @@ -384,29 +383,21 @@ /* Bit masks for KPAD_STAT */ #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define nKPAD_IRQ 0x0 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ #define KPAD_PRESSED 0x8 /* Key press current status */ -#define nKPAD_PRESSED 0x0 /* Bit masks for KPAD_SOFTEVAL */ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -#define nKPAD_SOFTEVAL_E 0x0 /* Bit masks for SDH_COMMAND */ #define CMD_IDX 0x3f /* Command Index */ #define CMD_RSP 0x40 /* Response */ -#define nCMD_RSP 0x0 #define CMD_L_RSP 0x80 /* Long Response */ -#define nCMD_L_RSP 0x0 #define CMD_INT_E 0x100 /* Command Interrupt */ -#define nCMD_INT_E 0x0 #define CMD_PEND_E 0x200 /* Command Pending */ -#define nCMD_PEND_E 0x0 #define CMD_E 0x400 /* Command Enable */ -#define nCMD_E 0x0 /* Bit masks for SDH_PWR_CTL */ @@ -415,21 +406,15 @@ #define TBD 0x3c /* TBD */ #endif #define SD_CMD_OD 0x40 /* Open Drain Output */ -#define nSD_CMD_OD 0x0 #define ROD_CTL 0x80 /* Rod Control */ -#define nROD_CTL 0x0 /* Bit masks for SDH_CLK_CTL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define nCLK_E 0x0 #define PWR_SV_E 0x200 /* Power Save Enable */ -#define nPWR_SV_E 0x0 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define nCLKDIV_BYPASS 0x0 #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ -#define nWIDE_BUS 0x0 /* Bit masks for SDH_RESP_CMD */ @@ -438,133 +423,74 @@ /* Bit masks for SDH_DATA_CTL */ #define DTX_E 0x1 /* Data Transfer Enable */ -#define nDTX_E 0x0 #define DTX_DIR 0x2 /* Data Transfer Direction */ -#define nDTX_DIR 0x0 #define DTX_MODE 0x4 /* Data Transfer Mode */ -#define nDTX_MODE 0x0 #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define nDTX_DMA_E 0x0 #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ /* Bit masks for SDH_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define nCMD_CRC_FAIL 0x0 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define nDAT_CRC_FAIL 0x0 #define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define nCMD_TIMEOUT 0x0 #define DAT_TIMEOUT 0x8 /* Data Time Out */ -#define nDAT_TIMEOUT 0x0 #define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define nTX_UNDERRUN 0x0 #define RX_OVERRUN 0x20 /* Receive Overrun */ -#define nRX_OVERRUN 0x0 #define CMD_RESP_END 0x40 /* CMD Response End */ -#define nCMD_RESP_END 0x0 #define CMD_SENT 0x80 /* CMD Sent */ -#define nCMD_SENT 0x0 #define DAT_END 0x100 /* Data End */ -#define nDAT_END 0x0 #define START_BIT_ERR 0x200 /* Start Bit Error */ -#define nSTART_BIT_ERR 0x0 #define DAT_BLK_END 0x400 /* Data Block End */ -#define nDAT_BLK_END 0x0 #define CMD_ACT 0x800 /* CMD Active */ -#define nCMD_ACT 0x0 #define TX_ACT 0x1000 /* Transmit Active */ -#define nTX_ACT 0x0 #define RX_ACT 0x2000 /* Receive Active */ -#define nRX_ACT 0x0 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define nTX_FIFO_STAT 0x0 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define nRX_FIFO_STAT 0x0 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define nTX_FIFO_FULL 0x0 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define nRX_FIFO_FULL 0x0 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define nTX_FIFO_ZERO 0x0 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define nRX_DAT_ZERO 0x0 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define nTX_DAT_RDY 0x0 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ -#define nRX_FIFO_RDY 0x0 /* Bit masks for SDH_STATUS_CLR */ #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define nCMD_CRC_FAIL_STAT 0x0 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define nDAT_CRC_FAIL_STAT 0x0 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define nCMD_TIMEOUT_STAT 0x0 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define nDAT_TIMEOUT_STAT 0x0 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define nTX_UNDERRUN_STAT 0x0 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define nRX_OVERRUN_STAT 0x0 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define nCMD_RESP_END_STAT 0x0 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define nCMD_SENT_STAT 0x0 #define DAT_END_STAT 0x100 /* Data End Status */ -#define nDAT_END_STAT 0x0 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define nSTART_BIT_ERR_STAT 0x0 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ -#define nDAT_BLK_END_STAT 0x0 /* Bit masks for SDH_MASK0 */ #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define nCMD_CRC_FAIL_MASK 0x0 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define nDAT_CRC_FAIL_MASK 0x0 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define nCMD_TIMEOUT_MASK 0x0 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define nDAT_TIMEOUT_MASK 0x0 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define nTX_UNDERRUN_MASK 0x0 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define nRX_OVERRUN_MASK 0x0 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define nCMD_RESP_END_MASK 0x0 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define nCMD_SENT_MASK 0x0 #define DAT_END_MASK 0x100 /* Data End Mask */ -#define nDAT_END_MASK 0x0 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define nSTART_BIT_ERR_MASK 0x0 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define nDAT_BLK_END_MASK 0x0 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define nCMD_ACT_MASK 0x0 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define nTX_ACT_MASK 0x0 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define nRX_ACT_MASK 0x0 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define nTX_FIFO_STAT_MASK 0x0 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define nRX_FIFO_STAT_MASK 0x0 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define nTX_FIFO_FULL_MASK 0x0 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define nRX_FIFO_FULL_MASK 0x0 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define nTX_FIFO_ZERO_MASK 0x0 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define nRX_DAT_ZERO_MASK 0x0 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define nTX_DAT_RDY_MASK 0x0 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ -#define nRX_FIFO_RDY_MASK 0x0 /* Bit masks for SDH_FIFO_CNT */ @@ -573,73 +499,47 @@ /* Bit masks for SDH_E_STATUS */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define nSDIO_INT_DET 0x0 #define SD_CARD_DET 0x10 /* SD Card Detect */ -#define nSD_CARD_DET 0x0 /* Bit masks for SDH_E_MASK */ #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define nSDIO_MSK 0x0 #define SCD_MSK 0x40 /* Mask Card Detect */ -#define nSCD_MSK 0x0 /* Bit masks for SDH_CFG */ #define CLKS_EN 0x1 /* Clocks Enable */ -#define nCLKS_EN 0x0 #define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define nSD4E 0x0 #define MWE 0x8 /* Moving Window Enable */ -#define nMWE 0x0 #define SD_RST 0x10 /* SDMMC Reset */ -#define nSD_RST 0x0 #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define nPUP_SDDAT 0x0 #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define nPUP_SDDAT3 0x0 #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ -#define nPD_SDDAT3 0x0 /* Bit masks for SDH_RD_WAIT_EN */ #define RWR 0x1 /* Read Wait Request */ -#define nRWR 0x0 /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ -#define nPIO_START 0x0 #define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define nMULTI_START 0x0 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define nULTRA_START 0x0 #define XFER_DIR 0x8 /* Transfer Direction */ -#define nXFER_DIR 0x0 #define IORDY_EN 0x10 /* IORDY Enable */ -#define nIORDY_EN 0x0 #define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define nFIFO_FLUSH 0x0 #define SOFT_RST 0x40 /* Soft Reset */ -#define nSOFT_RST 0x0 #define DEV_RST 0x80 /* Device Reset */ -#define nDEV_RST 0x0 #define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define nTFRCNT_RST 0x0 #define END_ON_TERM 0x200 /* End/Terminate Select */ -#define nEND_ON_TERM 0x0 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define nPIO_USE_DMA 0x0 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ /* Bit masks for ATAPI_STATUS */ #define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define nPIO_XFER_ON 0x0 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define nMULTI_XFER_ON 0x0 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define nULTRA_XFER_ON 0x0 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ /* Bit masks for ATAPI_DEV_ADDR */ @@ -649,66 +549,39 @@ /* Bit masks for ATAPI_INT_MASK */ #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define nATAPI_DEV_INT_MASK 0x0 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define nPIO_DONE_MASK 0x0 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define nMULTI_DONE_MASK 0x0 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define nUDMAIN_DONE_MASK 0x0 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define nUDMAOUT_DONE_MASK 0x0 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define nHOST_TERM_XFER_MASK 0x0 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define nMULTI_TERM_MASK 0x0 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define nUDMAIN_TERM_MASK 0x0 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ -#define nUDMAOUT_TERM_MASK 0x0 /* Bit masks for ATAPI_INT_STATUS */ #define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define nATAPI_DEV_INT 0x0 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define nPIO_DONE_INT 0x0 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define nMULTI_DONE_INT 0x0 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define nUDMAIN_DONE_INT 0x0 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define nUDMAOUT_DONE_INT 0x0 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define nHOST_TERM_XFER_INT 0x0 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define nMULTI_TERM_INT 0x0 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define nUDMAIN_TERM_INT 0x0 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ -#define nUDMAOUT_TERM_INT 0x0 /* Bit masks for ATAPI_LINE_STATUS */ #define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define nATAPI_INTR 0x0 #define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define nATAPI_DASP 0x0 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define nATAPI_CS0N 0x0 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define nATAPI_CS1N 0x0 #define ATAPI_ADDR 0x70 /* ATAPI address line status */ #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define nATAPI_DMAREQ 0x0 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define nATAPI_DMAACKN 0x0 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define nATAPI_DIOWN 0x0 #define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define nATAPI_DIORN 0x0 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ -#define nATAPI_IORDY 0x0 /* Bit masks for ATAPI_SM_STATE */ @@ -720,7 +593,6 @@ /* Bit masks for ATAPI_TERMINATE */ #define ATAPI_HOST_TERM 0x1 /* Host terminationation */ -#define nATAPI_HOST_TERM 0x0 /* Bit masks for ATAPI_REG_TIM_0 */ @@ -779,131 +651,77 @@ /* Bit masks for USB_POWER */ #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define nENABLE_SUSPENDM 0x0 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define nSUSPEND_MODE 0x0 #define RESUME_MODE 0x4 /* DMA Mode */ -#define nRESUME_MODE 0x0 #define RESET 0x8 /* Reset indicator */ -#define nRESET 0x0 #define HS_MODE 0x10 /* High Speed mode indicator */ -#define nHS_MODE 0x0 #define HS_ENABLE 0x20 /* high Speed Enable */ -#define nHS_ENABLE 0x0 #define SOFT_CONN 0x40 /* Soft connect */ -#define nSOFT_CONN 0x0 #define ISO_UPDATE 0x80 /* Isochronous update */ -#define nISO_UPDATE 0x0 /* Bit masks for USB_INTRTX */ #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define nEP0_TX 0x0 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define nEP1_TX 0x0 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define nEP2_TX 0x0 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define nEP3_TX 0x0 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define nEP4_TX 0x0 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define nEP5_TX 0x0 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define nEP6_TX 0x0 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ -#define nEP7_TX 0x0 /* Bit masks for USB_INTRRX */ #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define nEP1_RX 0x0 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define nEP2_RX 0x0 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define nEP3_RX 0x0 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define nEP4_RX 0x0 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define nEP5_RX 0x0 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define nEP6_RX 0x0 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ -#define nEP7_RX 0x0 /* Bit masks for USB_INTRTXE */ #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define nEP0_TX_E 0x0 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define nEP1_TX_E 0x0 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define nEP2_TX_E 0x0 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define nEP3_TX_E 0x0 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define nEP4_TX_E 0x0 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define nEP5_TX_E 0x0 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define nEP6_TX_E 0x0 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ -#define nEP7_TX_E 0x0 /* Bit masks for USB_INTRRXE */ #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define nEP1_RX_E 0x0 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define nEP2_RX_E 0x0 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define nEP3_RX_E 0x0 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define nEP4_RX_E 0x0 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define nEP5_RX_E 0x0 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define nEP6_RX_E 0x0 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ -#define nEP7_RX_E 0x0 /* Bit masks for USB_INTRUSB */ #define SUSPEND_B 0x1 /* Suspend indicator */ -#define nSUSPEND_B 0x0 #define RESUME_B 0x2 /* Resume indicator */ -#define nRESUME_B 0x0 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define nRESET_OR_BABLE_B 0x0 #define SOF_B 0x8 /* Start of frame */ -#define nSOF_B 0x0 #define CONN_B 0x10 /* Connection indicator */ -#define nCONN_B 0x0 #define DISCON_B 0x20 /* Disconnect indicator */ -#define nDISCON_B 0x0 #define SESSION_REQ_B 0x40 /* Session Request */ -#define nSESSION_REQ_B 0x0 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ -#define nVBUS_ERROR_B 0x0 /* Bit masks for USB_INTRUSBE */ #define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define nSUSPEND_BE 0x0 #define RESUME_BE 0x2 /* Resume indicator int enable */ -#define nRESUME_BE 0x0 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define nRESET_OR_BABLE_BE 0x0 #define SOF_BE 0x8 /* Start of frame int enable */ -#define nSOF_BE 0x0 #define CONN_BE 0x10 /* Connection indicator int enable */ -#define nCONN_BE 0x0 #define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define nDISCON_BE 0x0 #define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define nSESSION_REQ_BE 0x0 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ -#define nVBUS_ERROR_BE 0x0 /* Bit masks for USB_FRAME */ @@ -916,117 +734,67 @@ /* Bit masks for USB_GLOBAL_CTL */ #define GLOBAL_ENA 0x1 /* enables USB module */ -#define nGLOBAL_ENA 0x0 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define nEP1_TX_ENA 0x0 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define nEP2_TX_ENA 0x0 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define nEP3_TX_ENA 0x0 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define nEP4_TX_ENA 0x0 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define nEP5_TX_ENA 0x0 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define nEP6_TX_ENA 0x0 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define nEP7_TX_ENA 0x0 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define nEP1_RX_ENA 0x0 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define nEP2_RX_ENA 0x0 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define nEP3_RX_ENA 0x0 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define nEP4_RX_ENA 0x0 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define nEP5_RX_ENA 0x0 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define nEP6_RX_ENA 0x0 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ -#define nEP7_RX_ENA 0x0 /* Bit masks for USB_OTG_DEV_CTL */ #define SESSION 0x1 /* session indicator */ -#define nSESSION 0x0 #define HOST_REQ 0x2 /* Host negotiation request */ -#define nHOST_REQ 0x0 #define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define nHOST_MODE 0x0 #define VBUS0 0x8 /* Vbus level indicator[0] */ -#define nVBUS0 0x0 #define VBUS1 0x10 /* Vbus level indicator[1] */ -#define nVBUS1 0x0 #define LSDEV 0x20 /* Low-speed indicator */ -#define nLSDEV 0x0 #define FSDEV 0x40 /* Full or High-speed indicator */ -#define nFSDEV 0x0 #define B_DEVICE 0x80 /* A' or 'B' device indicator */ -#define nB_DEVICE 0x0 /* Bit masks for USB_OTG_VBUS_IRQ */ #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define nDRIVE_VBUS_ON 0x0 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define nDRIVE_VBUS_OFF 0x0 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define nCHRG_VBUS_START 0x0 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define nCHRG_VBUS_END 0x0 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define nDISCHRG_VBUS_START 0x0 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ -#define nDISCHRG_VBUS_END 0x0 /* Bit masks for USB_OTG_VBUS_MASK */ #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define nDRIVE_VBUS_ON_ENA 0x0 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define nDRIVE_VBUS_OFF_ENA 0x0 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define nCHRG_VBUS_START_ENA 0x0 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define nCHRG_VBUS_END_ENA 0x0 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define nDISCHRG_VBUS_START_ENA 0x0 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ -#define nDISCHRG_VBUS_END_ENA 0x0 /* Bit masks for USB_CSR0 */ #define RXPKTRDY 0x1 /* data packet receive indicator */ -#define nRXPKTRDY 0x0 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define nTXPKTRDY 0x0 #define STALL_SENT 0x4 /* STALL handshake sent */ -#define nSTALL_SENT 0x0 #define DATAEND 0x8 /* Data end indicator */ -#define nDATAEND 0x0 #define SETUPEND 0x10 /* Setup end */ -#define nSETUPEND 0x0 #define SENDSTALL 0x20 /* Send STALL handshake */ -#define nSENDSTALL 0x0 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define nSERVICED_RXPKTRDY 0x0 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define nSERVICED_SETUPEND 0x0 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define nFLUSHFIFO 0x0 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define nSTALL_RECEIVED_H 0x0 #define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define nSETUPPKT_H 0x0 #define ERROR_H 0x10 /* timeout error indicator host mode */ -#define nERROR_H 0x0 #define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define nREQPKT_H 0x0 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define nSTATUSPKT_H 0x0 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ -#define nNAK_TIMEOUT_H 0x0 /* Bit masks for USB_COUNT0 */ @@ -1047,37 +815,21 @@ /* Bit masks for USB_TXCSR */ #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define nTXPKTRDY_T 0x0 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define nFIFO_NOT_EMPTY_T 0x0 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define nUNDERRUN_T 0x0 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define nFLUSHFIFO_T 0x0 #define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define nSTALL_SEND_T 0x0 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define nSTALL_SENT_T 0x0 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_T 0x0 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define nINCOMPTX_T 0x0 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_T 0x0 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define nFORCE_DATATOGGLE_T 0x0 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_T 0x0 #define ISO_T 0x4000 /* enable Isochronous transfers */ -#define nISO_T 0x0 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOSET_T 0x0 #define ERROR_TH 0x4 /* error condition host mode */ -#define nERROR_TH 0x0 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_TH 0x0 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ -#define nNAK_TIMEOUT_TH 0x0 /* Bit masks for USB_TXCOUNT */ @@ -1086,45 +838,25 @@ /* Bit masks for USB_RXCSR */ #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define nRXPKTRDY_R 0x0 #define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define nFIFO_FULL_R 0x0 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define nOVERRUN_R 0x0 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define nDATAERROR_R 0x0 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define nFLUSHFIFO_R 0x0 #define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define nSTALL_SEND_R 0x0 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define nSTALL_SENT_R 0x0 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_R 0x0 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define nINCOMPRX_R 0x0 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_R 0x0 #define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define nDISNYET_R 0x0 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_R 0x0 #define ISO_R 0x4000 /* enable Isochronous transfers */ -#define nISO_R 0x0 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOCLEAR_R 0x0 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define nERROR_RH 0x0 #define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define nREQPKT_RH 0x0 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_RH 0x0 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define nINCOMPRX_RH 0x0 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define nDMAREQMODE_RH 0x0 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ -#define nAUTOREQ_RH 0x0 /* Bit masks for USB_RXCOUNT */ @@ -1151,35 +883,22 @@ /* Bit masks for USB_DMA_INTERRUPT */ #define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define nDMA0_INT 0x0 #define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define nDMA1_INT 0x0 #define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define nDMA2_INT 0x0 #define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define nDMA3_INT 0x0 #define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define nDMA4_INT 0x0 #define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define nDMA5_INT 0x0 #define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define nDMA6_INT 0x0 #define DMA7_INT 0x80 /* DMA7 pending interrupt */ -#define nDMA7_INT 0x0 /* Bit masks for USB_DMAxCONTROL */ #define DMA_ENA 0x1 /* DMA enable */ -#define nDMA_ENA 0x0 #define DIRECTION 0x2 /* direction of DMA transfer */ -#define nDIRECTION 0x0 #define MODE 0x4 /* DMA Bus error */ -#define nMODE 0x0 #define INT_ENA 0x8 /* Interrupt enable */ -#define nINT_ENA 0x0 #define EPNUM 0xf0 /* EP number */ #define BUSERROR 0x100 /* DMA Bus error */ -#define nBUSERROR 0x0 /* Bit masks for USB_DMAxADDRHIGH */ diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h index 8fc77ea12aa..dd955dcd39b 100644 --- a/include/asm-blackfin/mach-bf548/defBF544.h +++ b/include/asm-blackfin/mach-bf548/defBF544.h @@ -538,21 +538,13 @@ /* Bit masks for PIXC_CTL */ #define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define nPIXC_EN 0x0 #define OVR_A_EN 0x2 /* Overlay A Enable */ -#define nOVR_A_EN 0x0 #define OVR_B_EN 0x4 /* Overlay B Enable */ -#define nOVR_B_EN 0x0 #define IMG_FORM 0x8 /* Image Data Format */ -#define nIMG_FORM 0x0 #define OVR_FORM 0x10 /* Overlay Data Format */ -#define nOVR_FORM 0x0 #define OUT_FORM 0x20 /* Output Data Format */ -#define nOUT_FORM 0x0 #define UDS_MOD 0x40 /* Resampling Mode */ -#define nUDS_MOD 0x0 #define TC_EN 0x80 /* Transparent Color Enable */ -#define nTC_EN 0x0 #define IMG_STAT 0x300 /* Image FIFO Status */ #define OVR_STAT 0xc00 /* Overlay FIFO Status */ #define WM_LVL 0x3000 /* FIFO Watermark Level */ @@ -600,13 +592,9 @@ /* Bit masks for PIXC_INTRSTAT */ #define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define nOVR_INT_EN 0x0 #define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define nFRM_INT_EN 0x0 #define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define nOVR_INT_STAT 0x0 #define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ -#define nFRM_INT_STAT 0x0 /* Bit masks for PIXC_RYCON */ @@ -614,7 +602,6 @@ #define A12 0xffc00 /* A12 in the Coefficient Matrix */ #define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ #define RY_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nRY_MULT4 0x0 /* Bit masks for PIXC_GUCON */ @@ -622,7 +609,6 @@ #define A22 0xffc00 /* A22 in the Coefficient Matrix */ #define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ #define GU_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nGU_MULT4 0x0 /* Bit masks for PIXC_BVCON */ @@ -630,7 +616,6 @@ #define A32 0xffc00 /* A32 in the Coefficient Matrix */ #define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ #define BV_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nBV_MULT4 0x0 /* Bit masks for PIXC_CCBIAS */ @@ -647,48 +632,28 @@ /* Bit masks for HOST_CONTROL */ #define HOST_EN 0x1 /* Host Enable */ -#define nHOST_EN 0x0 #define HOST_END 0x2 /* Host Endianess */ -#define nHOST_END 0x0 #define DATA_SIZE 0x4 /* Data Size */ -#define nDATA_SIZE 0x0 #define HOST_RST 0x8 /* Host Reset */ -#define nHOST_RST 0x0 #define HRDY_OVR 0x20 /* Host Ready Override */ -#define nHRDY_OVR 0x0 #define INT_MODE 0x40 /* Interrupt Mode */ -#define nINT_MODE 0x0 #define BT_EN 0x80 /* Bus Timeout Enable */ -#define nBT_EN 0x0 #define EHW 0x100 /* Enable Host Write */ -#define nEHW 0x0 #define EHR 0x200 /* Enable Host Read */ -#define nEHR 0x0 #define BDR 0x400 /* Burst DMA Requests */ -#define nBDR 0x0 /* Bit masks for HOST_STATUS */ #define READY 0x1 /* DMA Ready */ -#define nREADY 0x0 #define FIFOFULL 0x2 /* FIFO Full */ -#define nFIFOFULL 0x0 #define FIFOEMPTY 0x4 /* FIFO Empty */ -#define nFIFOEMPTY 0x0 #define COMPLETE 0x8 /* DMA Complete */ -#define nCOMPLETE 0x0 #define HSHK 0x10 /* Host Handshake */ -#define nHSHK 0x0 #define TIMEOUT 0x20 /* Host Timeout */ -#define nTIMEOUT 0x0 #define HIRQ 0x40 /* Host Interrupt Request */ -#define nHIRQ 0x0 #define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define nALLOW_CNFG 0x0 #define DMA_DIR 0x100 /* DMA Direction */ -#define nDMA_DIR 0x0 #define BTE 0x200 /* Bus Timeout Enabled */ -#define nBTE 0x0 /* Bit masks for HOST_TIMEOUT */ @@ -697,67 +662,42 @@ /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ -#define nTIMEN8 0x0 #define TIMEN9 0x2 /* Timer 9 Enable */ -#define nTIMEN9 0x0 #define TIMEN10 0x4 /* Timer 10 Enable */ -#define nTIMEN10 0x0 /* Bit masks for TIMER_DISABLE1 */ #define TIMDIS8 0x1 /* Timer 8 Disable */ -#define nTIMDIS8 0x0 #define TIMDIS9 0x2 /* Timer 9 Disable */ -#define nTIMDIS9 0x0 #define TIMDIS10 0x4 /* Timer 10 Disable */ -#define nTIMDIS10 0x0 /* Bit masks for TIMER_STATUS1 */ #define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define nTIMIL8 0x0 #define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define nTIMIL9 0x0 #define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define nTIMIL10 0x0 #define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define nTOVF_ERR8 0x0 #define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define nTOVF_ERR9 0x0 #define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define nTOVF_ERR10 0x0 #define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define nTRUN8 0x0 #define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define nTRUN9 0x0 #define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ -#define nTRUN10 0x0 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ /* Bit masks for HMDMAx_CONTROL */ #define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define nHMDMAEN 0x0 #define REP 0x2 /* Handshake MDMA Request Polarity */ -#define nREP 0x0 #define UTE 0x8 /* Urgency Threshold Enable */ -#define nUTE 0x0 #define OIE 0x10 /* Overflow Interrupt Enable */ -#define nOIE 0x0 #define BDIE 0x20 /* Block Done Interrupt Enable */ -#define nBDIE 0x0 #define MBDI 0x40 /* Mask Block Done Interrupt */ -#define nMBDI 0x0 #define DRQ 0x300 /* Handshake MDMA Request Type */ #define RBC 0x1000 /* Force Reload of BCOUNT */ -#define nRBC 0x0 #define PS 0x2000 /* Pin Status */ -#define nPS 0x0 #define OI 0x4000 /* Overflow Interrupt Generated */ -#define nOI 0x0 #define BDI 0x8000 /* Block Done Interrupt Generated */ -#define nBDI 0x0 /* ******************************************* */ /* MULTI BIT MACRO ENUMERATIONS */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h index d9e3062a911..8d4214e0807 100644 --- a/include/asm-blackfin/mach-bf548/defBF548.h +++ b/include/asm-blackfin/mach-bf548/defBF548.h @@ -899,21 +899,13 @@ /* Bit masks for PIXC_CTL */ #define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define nPIXC_EN 0x0 #define OVR_A_EN 0x2 /* Overlay A Enable */ -#define nOVR_A_EN 0x0 #define OVR_B_EN 0x4 /* Overlay B Enable */ -#define nOVR_B_EN 0x0 #define IMG_FORM 0x8 /* Image Data Format */ -#define nIMG_FORM 0x0 #define OVR_FORM 0x10 /* Overlay Data Format */ -#define nOVR_FORM 0x0 #define OUT_FORM 0x20 /* Output Data Format */ -#define nOUT_FORM 0x0 #define UDS_MOD 0x40 /* Resampling Mode */ -#define nUDS_MOD 0x0 #define TC_EN 0x80 /* Transparent Color Enable */ -#define nTC_EN 0x0 #define IMG_STAT 0x300 /* Image FIFO Status */ #define OVR_STAT 0xc00 /* Overlay FIFO Status */ #define WM_LVL 0x3000 /* FIFO Watermark Level */ @@ -961,13 +953,9 @@ /* Bit masks for PIXC_INTRSTAT */ #define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define nOVR_INT_EN 0x0 #define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define nFRM_INT_EN 0x0 #define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define nOVR_INT_STAT 0x0 #define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ -#define nFRM_INT_STAT 0x0 /* Bit masks for PIXC_RYCON */ @@ -975,7 +963,6 @@ #define A12 0xffc00 /* A12 in the Coefficient Matrix */ #define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ #define RY_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nRY_MULT4 0x0 /* Bit masks for PIXC_GUCON */ @@ -983,7 +970,6 @@ #define A22 0xffc00 /* A22 in the Coefficient Matrix */ #define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ #define GU_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nGU_MULT4 0x0 /* Bit masks for PIXC_BVCON */ @@ -991,7 +977,6 @@ #define A32 0xffc00 /* A32 in the Coefficient Matrix */ #define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ #define BV_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nBV_MULT4 0x0 /* Bit masks for PIXC_CCBIAS */ @@ -1008,48 +993,28 @@ /* Bit masks for HOST_CONTROL */ #define HOST_EN 0x1 /* Host Enable */ -#define nHOST_EN 0x0 #define HOST_END 0x2 /* Host Endianess */ -#define nHOST_END 0x0 #define DATA_SIZE 0x4 /* Data Size */ -#define nDATA_SIZE 0x0 #define HOST_RST 0x8 /* Host Reset */ -#define nHOST_RST 0x0 #define HRDY_OVR 0x20 /* Host Ready Override */ -#define nHRDY_OVR 0x0 #define INT_MODE 0x40 /* Interrupt Mode */ -#define nINT_MODE 0x0 #define BT_EN 0x80 /* Bus Timeout Enable */ -#define nBT_EN 0x0 #define EHW 0x100 /* Enable Host Write */ -#define nEHW 0x0 #define EHR 0x200 /* Enable Host Read */ -#define nEHR 0x0 #define BDR 0x400 /* Burst DMA Requests */ -#define nBDR 0x0 /* Bit masks for HOST_STATUS */ #define READY 0x1 /* DMA Ready */ -#define nREADY 0x0 #define FIFOFULL 0x2 /* FIFO Full */ -#define nFIFOFULL 0x0 #define FIFOEMPTY 0x4 /* FIFO Empty */ -#define nFIFOEMPTY 0x0 #define COMPLETE 0x8 /* DMA Complete */ -#define nCOMPLETE 0x0 #define HSHK 0x10 /* Host Handshake */ -#define nHSHK 0x0 #define TIMEOUT 0x20 /* Host Timeout */ -#define nTIMEOUT 0x0 #define HIRQ 0x40 /* Host Interrupt Request */ -#define nHIRQ 0x0 #define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define nALLOW_CNFG 0x0 #define DMA_DIR 0x100 /* DMA Direction */ -#define nDMA_DIR 0x0 #define BTE 0x200 /* Bus Timeout Enabled */ -#define nBTE 0x0 /* Bit masks for HOST_TIMEOUT */ @@ -1058,7 +1023,6 @@ /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ -#define nKPAD_EN 0x0 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ #define KPAD_ROWEN 0x1c00 /* Row Enable Width */ #define KPAD_COLEN 0xe000 /* Column Enable Width */ @@ -1080,29 +1044,21 @@ /* Bit masks for KPAD_STAT */ #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define nKPAD_IRQ 0x0 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ #define KPAD_PRESSED 0x8 /* Key press current status */ -#define nKPAD_PRESSED 0x0 /* Bit masks for KPAD_SOFTEVAL */ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -#define nKPAD_SOFTEVAL_E 0x0 /* Bit masks for SDH_COMMAND */ #define CMD_IDX 0x3f /* Command Index */ #define CMD_RSP 0x40 /* Response */ -#define nCMD_RSP 0x0 #define CMD_L_RSP 0x80 /* Long Response */ -#define nCMD_L_RSP 0x0 #define CMD_INT_E 0x100 /* Command Interrupt */ -#define nCMD_INT_E 0x0 #define CMD_PEND_E 0x200 /* Command Pending */ -#define nCMD_PEND_E 0x0 #define CMD_E 0x400 /* Command Enable */ -#define nCMD_E 0x0 /* Bit masks for SDH_PWR_CTL */ @@ -1111,21 +1067,15 @@ #define TBD 0x3c /* TBD */ #endif #define SD_CMD_OD 0x40 /* Open Drain Output */ -#define nSD_CMD_OD 0x0 #define ROD_CTL 0x80 /* Rod Control */ -#define nROD_CTL 0x0 /* Bit masks for SDH_CLK_CTL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define nCLK_E 0x0 #define PWR_SV_E 0x200 /* Power Save Enable */ -#define nPWR_SV_E 0x0 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define nCLKDIV_BYPASS 0x0 #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ -#define nWIDE_BUS 0x0 /* Bit masks for SDH_RESP_CMD */ @@ -1134,133 +1084,74 @@ /* Bit masks for SDH_DATA_CTL */ #define DTX_E 0x1 /* Data Transfer Enable */ -#define nDTX_E 0x0 #define DTX_DIR 0x2 /* Data Transfer Direction */ -#define nDTX_DIR 0x0 #define DTX_MODE 0x4 /* Data Transfer Mode */ -#define nDTX_MODE 0x0 #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define nDTX_DMA_E 0x0 #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ /* Bit masks for SDH_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define nCMD_CRC_FAIL 0x0 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define nDAT_CRC_FAIL 0x0 #define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define nCMD_TIMEOUT 0x0 #define DAT_TIMEOUT 0x8 /* Data Time Out */ -#define nDAT_TIMEOUT 0x0 #define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define nTX_UNDERRUN 0x0 #define RX_OVERRUN 0x20 /* Receive Overrun */ -#define nRX_OVERRUN 0x0 #define CMD_RESP_END 0x40 /* CMD Response End */ -#define nCMD_RESP_END 0x0 #define CMD_SENT 0x80 /* CMD Sent */ -#define nCMD_SENT 0x0 #define DAT_END 0x100 /* Data End */ -#define nDAT_END 0x0 #define START_BIT_ERR 0x200 /* Start Bit Error */ -#define nSTART_BIT_ERR 0x0 #define DAT_BLK_END 0x400 /* Data Block End */ -#define nDAT_BLK_END 0x0 #define CMD_ACT 0x800 /* CMD Active */ -#define nCMD_ACT 0x0 #define TX_ACT 0x1000 /* Transmit Active */ -#define nTX_ACT 0x0 #define RX_ACT 0x2000 /* Receive Active */ -#define nRX_ACT 0x0 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define nTX_FIFO_STAT 0x0 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define nRX_FIFO_STAT 0x0 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define nTX_FIFO_FULL 0x0 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define nRX_FIFO_FULL 0x0 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define nTX_FIFO_ZERO 0x0 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define nRX_DAT_ZERO 0x0 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define nTX_DAT_RDY 0x0 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ -#define nRX_FIFO_RDY 0x0 /* Bit masks for SDH_STATUS_CLR */ #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define nCMD_CRC_FAIL_STAT 0x0 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define nDAT_CRC_FAIL_STAT 0x0 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define nCMD_TIMEOUT_STAT 0x0 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define nDAT_TIMEOUT_STAT 0x0 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define nTX_UNDERRUN_STAT 0x0 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define nRX_OVERRUN_STAT 0x0 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define nCMD_RESP_END_STAT 0x0 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define nCMD_SENT_STAT 0x0 #define DAT_END_STAT 0x100 /* Data End Status */ -#define nDAT_END_STAT 0x0 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define nSTART_BIT_ERR_STAT 0x0 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ -#define nDAT_BLK_END_STAT 0x0 /* Bit masks for SDH_MASK0 */ #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define nCMD_CRC_FAIL_MASK 0x0 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define nDAT_CRC_FAIL_MASK 0x0 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define nCMD_TIMEOUT_MASK 0x0 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define nDAT_TIMEOUT_MASK 0x0 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define nTX_UNDERRUN_MASK 0x0 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define nRX_OVERRUN_MASK 0x0 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define nCMD_RESP_END_MASK 0x0 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define nCMD_SENT_MASK 0x0 #define DAT_END_MASK 0x100 /* Data End Mask */ -#define nDAT_END_MASK 0x0 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define nSTART_BIT_ERR_MASK 0x0 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define nDAT_BLK_END_MASK 0x0 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define nCMD_ACT_MASK 0x0 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define nTX_ACT_MASK 0x0 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define nRX_ACT_MASK 0x0 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define nTX_FIFO_STAT_MASK 0x0 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define nRX_FIFO_STAT_MASK 0x0 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define nTX_FIFO_FULL_MASK 0x0 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define nRX_FIFO_FULL_MASK 0x0 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define nTX_FIFO_ZERO_MASK 0x0 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define nRX_DAT_ZERO_MASK 0x0 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define nTX_DAT_RDY_MASK 0x0 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ -#define nRX_FIFO_RDY_MASK 0x0 /* Bit masks for SDH_FIFO_CNT */ @@ -1269,73 +1160,47 @@ /* Bit masks for SDH_E_STATUS */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define nSDIO_INT_DET 0x0 #define SD_CARD_DET 0x10 /* SD Card Detect */ -#define nSD_CARD_DET 0x0 /* Bit masks for SDH_E_MASK */ #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define nSDIO_MSK 0x0 #define SCD_MSK 0x40 /* Mask Card Detect */ -#define nSCD_MSK 0x0 /* Bit masks for SDH_CFG */ #define CLKS_EN 0x1 /* Clocks Enable */ -#define nCLKS_EN 0x0 #define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define nSD4E 0x0 #define MWE 0x8 /* Moving Window Enable */ -#define nMWE 0x0 #define SD_RST 0x10 /* SDMMC Reset */ -#define nSD_RST 0x0 #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define nPUP_SDDAT 0x0 #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define nPUP_SDDAT3 0x0 #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ -#define nPD_SDDAT3 0x0 /* Bit masks for SDH_RD_WAIT_EN */ #define RWR 0x1 /* Read Wait Request */ -#define nRWR 0x0 /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ -#define nPIO_START 0x0 #define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define nMULTI_START 0x0 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define nULTRA_START 0x0 #define XFER_DIR 0x8 /* Transfer Direction */ -#define nXFER_DIR 0x0 #define IORDY_EN 0x10 /* IORDY Enable */ -#define nIORDY_EN 0x0 #define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define nFIFO_FLUSH 0x0 #define SOFT_RST 0x40 /* Soft Reset */ -#define nSOFT_RST 0x0 #define DEV_RST 0x80 /* Device Reset */ -#define nDEV_RST 0x0 #define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define nTFRCNT_RST 0x0 #define END_ON_TERM 0x200 /* End/Terminate Select */ -#define nEND_ON_TERM 0x0 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define nPIO_USE_DMA 0x0 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ /* Bit masks for ATAPI_STATUS */ #define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define nPIO_XFER_ON 0x0 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define nMULTI_XFER_ON 0x0 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define nULTRA_XFER_ON 0x0 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ /* Bit masks for ATAPI_DEV_ADDR */ @@ -1345,66 +1210,39 @@ /* Bit masks for ATAPI_INT_MASK */ #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define nATAPI_DEV_INT_MASK 0x0 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define nPIO_DONE_MASK 0x0 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define nMULTI_DONE_MASK 0x0 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define nUDMAIN_DONE_MASK 0x0 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define nUDMAOUT_DONE_MASK 0x0 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define nHOST_TERM_XFER_MASK 0x0 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define nMULTI_TERM_MASK 0x0 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define nUDMAIN_TERM_MASK 0x0 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ -#define nUDMAOUT_TERM_MASK 0x0 /* Bit masks for ATAPI_INT_STATUS */ #define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define nATAPI_DEV_INT 0x0 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define nPIO_DONE_INT 0x0 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define nMULTI_DONE_INT 0x0 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define nUDMAIN_DONE_INT 0x0 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define nUDMAOUT_DONE_INT 0x0 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define nHOST_TERM_XFER_INT 0x0 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define nMULTI_TERM_INT 0x0 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define nUDMAIN_TERM_INT 0x0 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ -#define nUDMAOUT_TERM_INT 0x0 /* Bit masks for ATAPI_LINE_STATUS */ #define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define nATAPI_INTR 0x0 #define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define nATAPI_DASP 0x0 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define nATAPI_CS0N 0x0 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define nATAPI_CS1N 0x0 #define ATAPI_ADDR 0x70 /* ATAPI address line status */ #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define nATAPI_DMAREQ 0x0 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define nATAPI_DMAACKN 0x0 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define nATAPI_DIOWN 0x0 #define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define nATAPI_DIORN 0x0 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ -#define nATAPI_IORDY 0x0 /* Bit masks for ATAPI_SM_STATE */ @@ -1416,7 +1254,6 @@ /* Bit masks for ATAPI_TERMINATE */ #define ATAPI_HOST_TERM 0x1 /* Host terminationation */ -#define nATAPI_HOST_TERM 0x0 /* Bit masks for ATAPI_REG_TIM_0 */ @@ -1471,41 +1308,26 @@ /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ -#define nTIMEN8 0x0 #define TIMEN9 0x2 /* Timer 9 Enable */ -#define nTIMEN9 0x0 #define TIMEN10 0x4 /* Timer 10 Enable */ -#define nTIMEN10 0x0 /* Bit masks for TIMER_DISABLE1 */ #define TIMDIS8 0x1 /* Timer 8 Disable */ -#define nTIMDIS8 0x0 #define TIMDIS9 0x2 /* Timer 9 Disable */ -#define nTIMDIS9 0x0 #define TIMDIS10 0x4 /* Timer 10 Disable */ -#define nTIMDIS10 0x0 /* Bit masks for TIMER_STATUS1 */ #define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define nTIMIL8 0x0 #define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define nTIMIL9 0x0 #define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define nTIMIL10 0x0 #define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define nTOVF_ERR8 0x0 #define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define nTOVF_ERR9 0x0 #define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define nTOVF_ERR10 0x0 #define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define nTRUN8 0x0 #define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define nTRUN9 0x0 #define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ -#define nTRUN10 0x0 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ @@ -1516,131 +1338,77 @@ /* Bit masks for USB_POWER */ #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define nENABLE_SUSPENDM 0x0 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define nSUSPEND_MODE 0x0 #define RESUME_MODE 0x4 /* DMA Mode */ -#define nRESUME_MODE 0x0 #define RESET 0x8 /* Reset indicator */ -#define nRESET 0x0 #define HS_MODE 0x10 /* High Speed mode indicator */ -#define nHS_MODE 0x0 #define HS_ENABLE 0x20 /* high Speed Enable */ -#define nHS_ENABLE 0x0 #define SOFT_CONN 0x40 /* Soft connect */ -#define nSOFT_CONN 0x0 #define ISO_UPDATE 0x80 /* Isochronous update */ -#define nISO_UPDATE 0x0 /* Bit masks for USB_INTRTX */ #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define nEP0_TX 0x0 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define nEP1_TX 0x0 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define nEP2_TX 0x0 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define nEP3_TX 0x0 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define nEP4_TX 0x0 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define nEP5_TX 0x0 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define nEP6_TX 0x0 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ -#define nEP7_TX 0x0 /* Bit masks for USB_INTRRX */ #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define nEP1_RX 0x0 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define nEP2_RX 0x0 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define nEP3_RX 0x0 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define nEP4_RX 0x0 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define nEP5_RX 0x0 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define nEP6_RX 0x0 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ -#define nEP7_RX 0x0 /* Bit masks for USB_INTRTXE */ #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define nEP0_TX_E 0x0 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define nEP1_TX_E 0x0 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define nEP2_TX_E 0x0 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define nEP3_TX_E 0x0 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define nEP4_TX_E 0x0 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define nEP5_TX_E 0x0 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define nEP6_TX_E 0x0 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ -#define nEP7_TX_E 0x0 /* Bit masks for USB_INTRRXE */ #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define nEP1_RX_E 0x0 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define nEP2_RX_E 0x0 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define nEP3_RX_E 0x0 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define nEP4_RX_E 0x0 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define nEP5_RX_E 0x0 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define nEP6_RX_E 0x0 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ -#define nEP7_RX_E 0x0 /* Bit masks for USB_INTRUSB */ #define SUSPEND_B 0x1 /* Suspend indicator */ -#define nSUSPEND_B 0x0 #define RESUME_B 0x2 /* Resume indicator */ -#define nRESUME_B 0x0 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define nRESET_OR_BABLE_B 0x0 #define SOF_B 0x8 /* Start of frame */ -#define nSOF_B 0x0 #define CONN_B 0x10 /* Connection indicator */ -#define nCONN_B 0x0 #define DISCON_B 0x20 /* Disconnect indicator */ -#define nDISCON_B 0x0 #define SESSION_REQ_B 0x40 /* Session Request */ -#define nSESSION_REQ_B 0x0 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ -#define nVBUS_ERROR_B 0x0 /* Bit masks for USB_INTRUSBE */ #define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define nSUSPEND_BE 0x0 #define RESUME_BE 0x2 /* Resume indicator int enable */ -#define nRESUME_BE 0x0 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define nRESET_OR_BABLE_BE 0x0 #define SOF_BE 0x8 /* Start of frame int enable */ -#define nSOF_BE 0x0 #define CONN_BE 0x10 /* Connection indicator int enable */ -#define nCONN_BE 0x0 #define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define nDISCON_BE 0x0 #define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define nSESSION_REQ_BE 0x0 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ -#define nVBUS_ERROR_BE 0x0 /* Bit masks for USB_FRAME */ @@ -1653,117 +1421,67 @@ /* Bit masks for USB_GLOBAL_CTL */ #define GLOBAL_ENA 0x1 /* enables USB module */ -#define nGLOBAL_ENA 0x0 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define nEP1_TX_ENA 0x0 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define nEP2_TX_ENA 0x0 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define nEP3_TX_ENA 0x0 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define nEP4_TX_ENA 0x0 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define nEP5_TX_ENA 0x0 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define nEP6_TX_ENA 0x0 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define nEP7_TX_ENA 0x0 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define nEP1_RX_ENA 0x0 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define nEP2_RX_ENA 0x0 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define nEP3_RX_ENA 0x0 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define nEP4_RX_ENA 0x0 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define nEP5_RX_ENA 0x0 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define nEP6_RX_ENA 0x0 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ -#define nEP7_RX_ENA 0x0 /* Bit masks for USB_OTG_DEV_CTL */ #define SESSION 0x1 /* session indicator */ -#define nSESSION 0x0 #define HOST_REQ 0x2 /* Host negotiation request */ -#define nHOST_REQ 0x0 #define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define nHOST_MODE 0x0 #define VBUS0 0x8 /* Vbus level indicator[0] */ -#define nVBUS0 0x0 #define VBUS1 0x10 /* Vbus level indicator[1] */ -#define nVBUS1 0x0 #define LSDEV 0x20 /* Low-speed indicator */ -#define nLSDEV 0x0 #define FSDEV 0x40 /* Full or High-speed indicator */ -#define nFSDEV 0x0 #define B_DEVICE 0x80 /* A' or 'B' device indicator */ -#define nB_DEVICE 0x0 /* Bit masks for USB_OTG_VBUS_IRQ */ #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define nDRIVE_VBUS_ON 0x0 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define nDRIVE_VBUS_OFF 0x0 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define nCHRG_VBUS_START 0x0 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define nCHRG_VBUS_END 0x0 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define nDISCHRG_VBUS_START 0x0 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ -#define nDISCHRG_VBUS_END 0x0 /* Bit masks for USB_OTG_VBUS_MASK */ #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define nDRIVE_VBUS_ON_ENA 0x0 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define nDRIVE_VBUS_OFF_ENA 0x0 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define nCHRG_VBUS_START_ENA 0x0 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define nCHRG_VBUS_END_ENA 0x0 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define nDISCHRG_VBUS_START_ENA 0x0 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ -#define nDISCHRG_VBUS_END_ENA 0x0 /* Bit masks for USB_CSR0 */ #define RXPKTRDY 0x1 /* data packet receive indicator */ -#define nRXPKTRDY 0x0 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define nTXPKTRDY 0x0 #define STALL_SENT 0x4 /* STALL handshake sent */ -#define nSTALL_SENT 0x0 #define DATAEND 0x8 /* Data end indicator */ -#define nDATAEND 0x0 #define SETUPEND 0x10 /* Setup end */ -#define nSETUPEND 0x0 #define SENDSTALL 0x20 /* Send STALL handshake */ -#define nSENDSTALL 0x0 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define nSERVICED_RXPKTRDY 0x0 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define nSERVICED_SETUPEND 0x0 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define nFLUSHFIFO 0x0 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define nSTALL_RECEIVED_H 0x0 #define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define nSETUPPKT_H 0x0 #define ERROR_H 0x10 /* timeout error indicator host mode */ -#define nERROR_H 0x0 #define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define nREQPKT_H 0x0 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define nSTATUSPKT_H 0x0 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ -#define nNAK_TIMEOUT_H 0x0 /* Bit masks for USB_COUNT0 */ @@ -1784,37 +1502,21 @@ /* Bit masks for USB_TXCSR */ #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define nTXPKTRDY_T 0x0 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define nFIFO_NOT_EMPTY_T 0x0 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define nUNDERRUN_T 0x0 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define nFLUSHFIFO_T 0x0 #define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define nSTALL_SEND_T 0x0 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define nSTALL_SENT_T 0x0 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_T 0x0 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define nINCOMPTX_T 0x0 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_T 0x0 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define nFORCE_DATATOGGLE_T 0x0 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_T 0x0 #define ISO_T 0x4000 /* enable Isochronous transfers */ -#define nISO_T 0x0 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOSET_T 0x0 #define ERROR_TH 0x4 /* error condition host mode */ -#define nERROR_TH 0x0 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_TH 0x0 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ -#define nNAK_TIMEOUT_TH 0x0 /* Bit masks for USB_TXCOUNT */ @@ -1823,45 +1525,25 @@ /* Bit masks for USB_RXCSR */ #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define nRXPKTRDY_R 0x0 #define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define nFIFO_FULL_R 0x0 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define nOVERRUN_R 0x0 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define nDATAERROR_R 0x0 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define nFLUSHFIFO_R 0x0 #define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define nSTALL_SEND_R 0x0 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define nSTALL_SENT_R 0x0 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_R 0x0 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define nINCOMPRX_R 0x0 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_R 0x0 #define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define nDISNYET_R 0x0 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_R 0x0 #define ISO_R 0x4000 /* enable Isochronous transfers */ -#define nISO_R 0x0 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOCLEAR_R 0x0 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define nERROR_RH 0x0 #define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define nREQPKT_RH 0x0 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_RH 0x0 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define nINCOMPRX_RH 0x0 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define nDMAREQMODE_RH 0x0 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ -#define nAUTOREQ_RH 0x0 /* Bit masks for USB_RXCOUNT */ @@ -1888,35 +1570,22 @@ /* Bit masks for USB_DMA_INTERRUPT */ #define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define nDMA0_INT 0x0 #define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define nDMA1_INT 0x0 #define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define nDMA2_INT 0x0 #define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define nDMA3_INT 0x0 #define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define nDMA4_INT 0x0 #define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define nDMA5_INT 0x0 #define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define nDMA6_INT 0x0 #define DMA7_INT 0x80 /* DMA7 pending interrupt */ -#define nDMA7_INT 0x0 /* Bit masks for USB_DMAxCONTROL */ #define DMA_ENA 0x1 /* DMA enable */ -#define nDMA_ENA 0x0 #define DIRECTION 0x2 /* direction of DMA transfer */ -#define nDIRECTION 0x0 #define MODE 0x4 /* DMA Bus error */ -#define nMODE 0x0 #define INT_ENA 0x8 /* Interrupt enable */ -#define nINT_ENA 0x0 #define EPNUM 0xf0 /* EP number */ #define BUSERROR 0x100 /* DMA Bus error */ -#define nBUSERROR 0x0 /* Bit masks for USB_DMAxADDRHIGH */ @@ -1937,26 +1606,16 @@ /* Bit masks for HMDMAx_CONTROL */ #define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define nHMDMAEN 0x0 #define REP 0x2 /* Handshake MDMA Request Polarity */ -#define nREP 0x0 #define UTE 0x8 /* Urgency Threshold Enable */ -#define nUTE 0x0 #define OIE 0x10 /* Overflow Interrupt Enable */ -#define nOIE 0x0 #define BDIE 0x20 /* Block Done Interrupt Enable */ -#define nBDIE 0x0 #define MBDI 0x40 /* Mask Block Done Interrupt */ -#define nMBDI 0x0 #define DRQ 0x300 /* Handshake MDMA Request Type */ #define RBC 0x1000 /* Force Reload of BCOUNT */ -#define nRBC 0x0 #define PS 0x2000 /* Pin Status */ -#define nPS 0x0 #define OI 0x4000 /* Overflow Interrupt Generated */ -#define nOI 0x0 #define BDI 0x8000 /* Block Done Interrupt Generated */ -#define nBDI 0x0 /* ******************************************* */ /* MULTI BIT MACRO ENUMERATIONS */ diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h index b1cc1c073b4..c2f4734da48 100644 --- a/include/asm-blackfin/mach-bf548/defBF549.h +++ b/include/asm-blackfin/mach-bf548/defBF549.h @@ -1070,21 +1070,13 @@ /* Bit masks for PIXC_CTL */ #define PIXC_EN 0x1 /* Pixel Compositor Enable */ -#define nPIXC_EN 0x0 #define OVR_A_EN 0x2 /* Overlay A Enable */ -#define nOVR_A_EN 0x0 #define OVR_B_EN 0x4 /* Overlay B Enable */ -#define nOVR_B_EN 0x0 #define IMG_FORM 0x8 /* Image Data Format */ -#define nIMG_FORM 0x0 #define OVR_FORM 0x10 /* Overlay Data Format */ -#define nOVR_FORM 0x0 #define OUT_FORM 0x20 /* Output Data Format */ -#define nOUT_FORM 0x0 #define UDS_MOD 0x40 /* Resampling Mode */ -#define nUDS_MOD 0x0 #define TC_EN 0x80 /* Transparent Color Enable */ -#define nTC_EN 0x0 #define IMG_STAT 0x300 /* Image FIFO Status */ #define OVR_STAT 0xc00 /* Overlay FIFO Status */ #define WM_LVL 0x3000 /* FIFO Watermark Level */ @@ -1132,13 +1124,9 @@ /* Bit masks for PIXC_INTRSTAT */ #define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ -#define nOVR_INT_EN 0x0 #define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ -#define nFRM_INT_EN 0x0 #define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ -#define nOVR_INT_STAT 0x0 #define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ -#define nFRM_INT_STAT 0x0 /* Bit masks for PIXC_RYCON */ @@ -1146,7 +1134,6 @@ #define A12 0xffc00 /* A12 in the Coefficient Matrix */ #define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ #define RY_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nRY_MULT4 0x0 /* Bit masks for PIXC_GUCON */ @@ -1154,7 +1141,6 @@ #define A22 0xffc00 /* A22 in the Coefficient Matrix */ #define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ #define GU_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nGU_MULT4 0x0 /* Bit masks for PIXC_BVCON */ @@ -1162,7 +1148,6 @@ #define A32 0xffc00 /* A32 in the Coefficient Matrix */ #define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ #define BV_MULT4 0x40000000 /* Multiply Row by 4 */ -#define nBV_MULT4 0x0 /* Bit masks for PIXC_CCBIAS */ @@ -1179,48 +1164,28 @@ /* Bit masks for HOST_CONTROL */ #define HOST_EN 0x1 /* Host Enable */ -#define nHOST_EN 0x0 #define HOST_END 0x2 /* Host Endianess */ -#define nHOST_END 0x0 #define DATA_SIZE 0x4 /* Data Size */ -#define nDATA_SIZE 0x0 #define HOST_RST 0x8 /* Host Reset */ -#define nHOST_RST 0x0 #define HRDY_OVR 0x20 /* Host Ready Override */ -#define nHRDY_OVR 0x0 #define INT_MODE 0x40 /* Interrupt Mode */ -#define nINT_MODE 0x0 #define BT_EN 0x80 /* Bus Timeout Enable */ -#define nBT_EN 0x0 #define EHW 0x100 /* Enable Host Write */ -#define nEHW 0x0 #define EHR 0x200 /* Enable Host Read */ -#define nEHR 0x0 #define BDR 0x400 /* Burst DMA Requests */ -#define nBDR 0x0 /* Bit masks for HOST_STATUS */ #define READY 0x1 /* DMA Ready */ -#define nREADY 0x0 #define FIFOFULL 0x2 /* FIFO Full */ -#define nFIFOFULL 0x0 #define FIFOEMPTY 0x4 /* FIFO Empty */ -#define nFIFOEMPTY 0x0 -#define COMPLETE 0x8 /* DMA Complete */ -#define nCOMPLETE 0x0 +#define DMA_COMPLETE 0x8 /* DMA Complete */ #define HSHK 0x10 /* Host Handshake */ -#define nHSHK 0x0 #define TIMEOUT 0x20 /* Host Timeout */ -#define nTIMEOUT 0x0 #define HIRQ 0x40 /* Host Interrupt Request */ -#define nHIRQ 0x0 #define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define nALLOW_CNFG 0x0 #define DMA_DIR 0x100 /* DMA Direction */ -#define nDMA_DIR 0x0 #define BTE 0x200 /* Bus Timeout Enabled */ -#define nBTE 0x0 /* Bit masks for HOST_TIMEOUT */ @@ -1229,71 +1194,41 @@ /* Bit masks for MXVR_CONFIG */ #define MXVREN 0x1 /* MXVR Enable */ -#define nMXVREN 0x0 #define MMSM 0x2 /* MXVR Master/Slave Mode Select */ -#define nMMSM 0x0 #define ACTIVE 0x4 /* Active Mode */ -#define nACTIVE 0x0 #define SDELAY 0x8 /* Synchronous Data Delay */ -#define nSDELAY 0x0 #define NCMRXEN 0x10 /* Normal Control Message Receive Enable */ -#define nNCMRXEN 0x0 #define RWRRXEN 0x20 /* Remote Write Receive Enable */ -#define nRWRRXEN 0x0 #define MTXEN 0x40 /* MXVR Transmit Data Enable */ -#define nMTXEN 0x0 #define MTXONB 0x80 /* MXVR Phy Transmitter On */ -#define nMTXONB 0x0 #define EPARITY 0x100 /* Even Parity Select */ -#define nEPARITY 0x0 #define MSB 0x1e00 /* Master Synchronous Boundary */ #define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */ -#define nAPRXEN 0x0 #define WAKEUP 0x4000 /* Wake-Up */ -#define nWAKEUP 0x0 #define LMECH 0x8000 /* Lock Mechanism Select */ -#define nLMECH 0x0 /* Bit masks for MXVR_STATE_0 */ #define NACT 0x1 /* Network Activity */ -#define nNACT 0x0 #define SBLOCK 0x2 /* Super Block Lock */ -#define nSBLOCK 0x0 #define FMPLLST 0xc /* Frequency Multiply PLL SM State */ #define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */ #define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */ -#define nAPBSY 0x0 #define APARB 0x200 /* Asynchronous Packet Arbitrating */ -#define nAPARB 0x0 #define APTX 0x400 /* Asynchronous Packet Transmitting */ -#define nAPTX 0x0 #define APRX 0x800 /* Receiving Asynchronous Packet */ -#define nAPRX 0x0 #define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */ -#define nCMBSY 0x0 #define CMARB 0x2000 /* Control Message Arbitrating */ -#define nCMARB 0x0 #define CMTX 0x4000 /* Control Message Transmitting */ -#define nCMTX 0x0 #define CMRX 0x8000 /* Receiving Control Message */ -#define nCMRX 0x0 #define MRXONB 0x10000 /* MRXONB Pin State */ -#define nMRXONB 0x0 #define RGSIP 0x20000 /* Remote Get Source In Progress */ -#define nRGSIP 0x0 #define DALIP 0x40000 /* Resource Deallocate In Progress */ -#define nDALIP 0x0 #define ALIP 0x80000 /* Resource Allocate In Progress */ -#define nALIP 0x0 #define RRDIP 0x100000 /* Remote Read In Progress */ -#define nRRDIP 0x0 #define RWRIP 0x200000 /* Remote Write In Progress */ -#define nRWRIP 0x0 #define FLOCK 0x400000 /* Frame Lock */ -#define nFLOCK 0x0 #define BLOCK 0x800000 /* Block Lock */ -#define nBLOCK 0x0 #define RSB 0xf000000 /* Received Synchronous Boundary */ #define DERRNUM 0xf0000000 /* DMA Error Channel Number */ @@ -1302,535 +1237,343 @@ #define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */ #define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */ #define APCONT 0x100 /* Asynchronous Packet Continuation */ -#define nAPCONT 0x0 #define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */ #define DMAACTIVE0 0x10000 /* DMA0 Active */ -#define nDMAACTIVE0 0x0 #define DMAACTIVE1 0x20000 /* DMA1 Active */ -#define nDMAACTIVE1 0x0 #define DMAACTIVE2 0x40000 /* DMA2 Active */ -#define nDMAACTIVE2 0x0 #define DMAACTIVE3 0x80000 /* DMA3 Active */ -#define nDMAACTIVE3 0x0 #define DMAACTIVE4 0x100000 /* DMA4 Active */ -#define nDMAACTIVE4 0x0 #define DMAACTIVE5 0x200000 /* DMA5 Active */ -#define nDMAACTIVE5 0x0 #define DMAACTIVE6 0x400000 /* DMA6 Active */ -#define nDMAACTIVE6 0x0 #define DMAACTIVE7 0x800000 /* DMA7 Active */ -#define nDMAACTIVE7 0x0 #define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */ -#define nDMAPMEN0 0x0 #define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */ -#define nDMAPMEN1 0x0 #define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */ -#define nDMAPMEN2 0x0 #define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */ -#define nDMAPMEN3 0x0 #define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */ -#define nDMAPMEN4 0x0 #define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */ -#define nDMAPMEN5 0x0 #define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */ -#define nDMAPMEN6 0x0 #define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */ -#define nDMAPMEN7 0x0 /* Bit masks for MXVR_INT_STAT_0 */ #define NI2A 0x1 /* Network Inactive to Active */ -#define nNI2A 0x0 #define NA2I 0x2 /* Network Active to Inactive */ -#define nNA2I 0x0 #define SBU2L 0x4 /* Super Block Unlock to Lock */ -#define nSBU2L 0x0 #define SBL2U 0x8 /* Super Block Lock to Unlock */ -#define nSBL2U 0x0 #define PRU 0x10 /* Position Register Updated */ -#define nPRU 0x0 #define MPRU 0x20 /* Maximum Position Register Updated */ -#define nMPRU 0x0 #define DRU 0x40 /* Delay Register Updated */ -#define nDRU 0x0 #define MDRU 0x80 /* Maximum Delay Register Updated */ -#define nMDRU 0x0 #define SBU 0x100 /* Synchronous Boundary Updated */ -#define nSBU 0x0 #define ATU 0x200 /* Allocation Table Updated */ -#define nATU 0x0 #define FCZ0 0x400 /* Frame Counter 0 Zero */ -#define nFCZ0 0x0 #define FCZ1 0x800 /* Frame Counter 1 Zero */ -#define nFCZ1 0x0 #define PERR 0x1000 /* Parity Error */ -#define nPERR 0x0 #define MH2L 0x2000 /* MRXONB High to Low */ -#define nMH2L 0x0 #define ML2H 0x4000 /* MRXONB Low to High */ -#define nML2H 0x0 #define WUP 0x8000 /* Wake-Up Preamble Received */ -#define nWUP 0x0 #define FU2L 0x10000 /* Frame Unlock to Lock */ -#define nFU2L 0x0 #define FL2U 0x20000 /* Frame Lock to Unlock */ -#define nFL2U 0x0 #define BU2L 0x40000 /* Block Unlock to Lock */ -#define nBU2L 0x0 #define BL2U 0x80000 /* Block Lock to Unlock */ -#define nBL2U 0x0 #define OBERR 0x100000 /* DMA Out of Bounds Error */ -#define nOBERR 0x0 #define PFL 0x200000 /* PLL Frequency Locked */ -#define nPFL 0x0 #define SCZ 0x400000 /* System Clock Counter Zero */ -#define nSCZ 0x0 #define FERR 0x800000 /* FIFO Error */ -#define nFERR 0x0 #define CMR 0x1000000 /* Control Message Received */ -#define nCMR 0x0 #define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */ -#define nCMROF 0x0 #define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */ -#define nCMTS 0x0 #define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */ -#define nCMTC 0x0 #define RWRC 0x10000000 /* Remote Write Control Message Completed */ -#define nRWRC 0x0 #define BCZ 0x20000000 /* Block Counter Zero */ -#define nBCZ 0x0 #define BMERR 0x40000000 /* Biphase Mark Coding Error */ -#define nBMERR 0x0 #define DERR 0x80000000 /* DMA Error */ -#define nDERR 0x0 /* Bit masks for MXVR_INT_STAT_1 */ #define HDONE0 0x1 /* DMA0 Half Done */ -#define nHDONE0 0x0 #define DONE0 0x2 /* DMA0 Done */ -#define nDONE0 0x0 #define APR 0x4 /* Asynchronous Packet Received */ -#define nAPR 0x0 #define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */ -#define nAPROF 0x0 #define HDONE1 0x10 /* DMA1 Half Done */ -#define nHDONE1 0x0 #define DONE1 0x20 /* DMA1 Done */ -#define nDONE1 0x0 #define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */ -#define nAPTS 0x0 #define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */ -#define nAPTC 0x0 #define HDONE2 0x100 /* DMA2 Half Done */ -#define nHDONE2 0x0 #define DONE2 0x200 /* DMA2 Done */ -#define nDONE2 0x0 #define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */ -#define nAPRCE 0x0 #define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */ -#define nAPRPE 0x0 #define HDONE3 0x1000 /* DMA3 Half Done */ -#define nHDONE3 0x0 #define DONE3 0x2000 /* DMA3 Done */ -#define nDONE3 0x0 #define HDONE4 0x10000 /* DMA4 Half Done */ -#define nHDONE4 0x0 #define DONE4 0x20000 /* DMA4 Done */ -#define nDONE4 0x0 #define HDONE5 0x100000 /* DMA5 Half Done */ -#define nHDONE5 0x0 #define DONE5 0x200000 /* DMA5 Done */ -#define nDONE5 0x0 #define HDONE6 0x1000000 /* DMA6 Half Done */ -#define nHDONE6 0x0 #define DONE6 0x2000000 /* DMA6 Done */ -#define nDONE6 0x0 #define HDONE7 0x10000000 /* DMA7 Half Done */ -#define nHDONE7 0x0 #define DONE7 0x20000000 /* DMA7 Done */ -#define nDONE7 0x0 /* Bit masks for MXVR_INT_EN_0 */ #define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */ -#define nNI2AEN 0x0 #define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */ -#define nNA2IEN 0x0 #define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */ -#define nSBU2LEN 0x0 #define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */ -#define nSBL2UEN 0x0 #define PRUEN 0x10 /* Position Register Updated Interrupt Enable */ -#define nPRUEN 0x0 #define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */ -#define nMPRUEN 0x0 #define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */ -#define nDRUEN 0x0 #define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */ -#define nMDRUEN 0x0 #define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */ -#define nSBUEN 0x0 #define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */ -#define nATUEN 0x0 #define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */ -#define nFCZ0EN 0x0 #define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */ -#define nFCZ1EN 0x0 #define PERREN 0x1000 /* Parity Error Interrupt Enable */ -#define nPERREN 0x0 #define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */ -#define nMH2LEN 0x0 #define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */ -#define nML2HEN 0x0 #define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */ -#define nWUPEN 0x0 #define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */ -#define nFU2LEN 0x0 #define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */ -#define nFL2UEN 0x0 #define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */ -#define nBU2LEN 0x0 #define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */ -#define nBL2UEN 0x0 #define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */ -#define nOBERREN 0x0 #define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */ -#define nPFLEN 0x0 #define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */ -#define nSCZEN 0x0 #define FERREN 0x800000 /* FIFO Error Interrupt Enable */ -#define nFERREN 0x0 #define CMREN 0x1000000 /* Control Message Received Interrupt Enable */ -#define nCMREN 0x0 #define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */ -#define nCMROFEN 0x0 #define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */ -#define nCMTSEN 0x0 #define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */ -#define nCMTCEN 0x0 #define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */ -#define nRWRCEN 0x0 #define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */ -#define nBCZEN 0x0 #define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */ -#define nBMERREN 0x0 #define DERREN 0x80000000 /* DMA Error Interrupt Enable */ -#define nDERREN 0x0 /* Bit masks for MXVR_INT_EN_1 */ #define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */ -#define nHDONEEN0 0x0 #define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */ -#define nDONEEN0 0x0 #define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */ -#define nAPREN 0x0 #define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */ -#define nAPROFEN 0x0 #define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */ -#define nHDONEEN1 0x0 #define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */ -#define nDONEEN1 0x0 #define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */ -#define nAPTSEN 0x0 #define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */ -#define nAPTCEN 0x0 #define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */ -#define nHDONEEN2 0x0 #define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */ -#define nDONEEN2 0x0 #define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */ -#define nAPRCEEN 0x0 #define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */ -#define nAPRPEEN 0x0 #define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */ -#define nHDONEEN3 0x0 #define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */ -#define nDONEEN3 0x0 #define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */ -#define nHDONEEN4 0x0 #define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */ -#define nDONEEN4 0x0 #define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */ -#define nHDONEEN5 0x0 #define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */ -#define nDONEEN5 0x0 #define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */ -#define nHDONEEN6 0x0 #define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */ -#define nDONEEN6 0x0 #define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */ -#define nHDONEEN7 0x0 #define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */ -#define nDONEEN7 0x0 /* Bit masks for MXVR_POSITION */ #define POSITION 0x3f /* Node Position */ #define PVALID 0x8000 /* Node Position Valid */ -#define nPVALID 0x0 /* Bit masks for MXVR_MAX_POSITION */ #define MPOSITION 0x3f /* Maximum Node Position */ #define MPVALID 0x8000 /* Maximum Node Position Valid */ -#define nMPVALID 0x0 /* Bit masks for MXVR_DELAY */ #define DELAY 0x3f /* Node Frame Delay */ #define DVALID 0x8000 /* Node Frame Delay Valid */ -#define nDVALID 0x0 /* Bit masks for MXVR_MAX_DELAY */ #define MDELAY 0x3f /* Maximum Node Frame Delay */ #define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */ -#define nMDVALID 0x0 /* Bit masks for MXVR_LADDR */ #define LADDR 0xffff /* Logical Address */ #define LVALID 0x80000000 /* Logical Address Valid */ -#define nLVALID 0x0 /* Bit masks for MXVR_GADDR */ #define GADDRL 0xff /* Group Address Lower Byte */ #define GVALID 0x8000 /* Group Address Valid */ -#define nGVALID 0x0 /* Bit masks for MXVR_AADDR */ #define AADDR 0xffff /* Alternate Address */ #define AVALID 0x80000000 /* Alternate Address Valid */ -#define nAVALID 0x0 /* Bit masks for MXVR_ALLOC_0 */ #define CL0 0x7f /* Channel 0 Connection Label */ #define CIU0 0x80 /* Channel 0 In Use */ -#define nCIU0 0x0 #define CL1 0x7f00 /* Channel 0 Connection Label */ #define CIU1 0x8000 /* Channel 0 In Use */ -#define nCIU1 0x0 #define CL2 0x7f0000 /* Channel 0 Connection Label */ #define CIU2 0x800000 /* Channel 0 In Use */ -#define nCIU2 0x0 #define CL3 0x7f000000 /* Channel 0 Connection Label */ #define CIU3 0x80000000 /* Channel 0 In Use */ -#define nCIU3 0x0 /* Bit masks for MXVR_ALLOC_1 */ #define CL4 0x7f /* Channel 4 Connection Label */ #define CIU4 0x80 /* Channel 4 In Use */ -#define nCIU4 0x0 #define CL5 0x7f00 /* Channel 5 Connection Label */ #define CIU5 0x8000 /* Channel 5 In Use */ -#define nCIU5 0x0 #define CL6 0x7f0000 /* Channel 6 Connection Label */ #define CIU6 0x800000 /* Channel 6 In Use */ -#define nCIU6 0x0 #define CL7 0x7f000000 /* Channel 7 Connection Label */ #define CIU7 0x80000000 /* Channel 7 In Use */ -#define nCIU7 0x0 /* Bit masks for MXVR_ALLOC_2 */ #define CL8 0x7f /* Channel 8 Connection Label */ #define CIU8 0x80 /* Channel 8 In Use */ -#define nCIU8 0x0 #define CL9 0x7f00 /* Channel 9 Connection Label */ #define CIU9 0x8000 /* Channel 9 In Use */ -#define nCIU9 0x0 #define CL10 0x7f0000 /* Channel 10 Connection Label */ #define CIU10 0x800000 /* Channel 10 In Use */ -#define nCIU10 0x0 #define CL11 0x7f000000 /* Channel 11 Connection Label */ #define CIU11 0x80000000 /* Channel 11 In Use */ -#define nCIU11 0x0 /* Bit masks for MXVR_ALLOC_3 */ #define CL12 0x7f /* Channel 12 Connection Label */ #define CIU12 0x80 /* Channel 12 In Use */ -#define nCIU12 0x0 #define CL13 0x7f00 /* Channel 13 Connection Label */ #define CIU13 0x8000 /* Channel 13 In Use */ -#define nCIU13 0x0 #define CL14 0x7f0000 /* Channel 14 Connection Label */ #define CIU14 0x800000 /* Channel 14 In Use */ -#define nCIU14 0x0 #define CL15 0x7f000000 /* Channel 15 Connection Label */ #define CIU15 0x80000000 /* Channel 15 In Use */ -#define nCIU15 0x0 /* Bit masks for MXVR_ALLOC_4 */ #define CL16 0x7f /* Channel 16 Connection Label */ #define CIU16 0x80 /* Channel 16 In Use */ -#define nCIU16 0x0 #define CL17 0x7f00 /* Channel 17 Connection Label */ #define CIU17 0x8000 /* Channel 17 In Use */ -#define nCIU17 0x0 #define CL18 0x7f0000 /* Channel 18 Connection Label */ #define CIU18 0x800000 /* Channel 18 In Use */ -#define nCIU18 0x0 #define CL19 0x7f000000 /* Channel 19 Connection Label */ #define CIU19 0x80000000 /* Channel 19 In Use */ -#define nCIU19 0x0 /* Bit masks for MXVR_ALLOC_5 */ #define CL20 0x7f /* Channel 20 Connection Label */ #define CIU20 0x80 /* Channel 20 In Use */ -#define nCIU20 0x0 #define CL21 0x7f00 /* Channel 21 Connection Label */ #define CIU21 0x8000 /* Channel 21 In Use */ -#define nCIU21 0x0 #define CL22 0x7f0000 /* Channel 22 Connection Label */ #define CIU22 0x800000 /* Channel 22 In Use */ -#define nCIU22 0x0 #define CL23 0x7f000000 /* Channel 23 Connection Label */ #define CIU23 0x80000000 /* Channel 23 In Use */ -#define nCIU23 0x0 /* Bit masks for MXVR_ALLOC_6 */ #define CL24 0x7f /* Channel 24 Connection Label */ #define CIU24 0x80 /* Channel 24 In Use */ -#define nCIU24 0x0 #define CL25 0x7f00 /* Channel 25 Connection Label */ #define CIU25 0x8000 /* Channel 25 In Use */ -#define nCIU25 0x0 #define CL26 0x7f0000 /* Channel 26 Connection Label */ #define CIU26 0x800000 /* Channel 26 In Use */ -#define nCIU26 0x0 #define CL27 0x7f000000 /* Channel 27 Connection Label */ #define CIU27 0x80000000 /* Channel 27 In Use */ -#define nCIU27 0x0 /* Bit masks for MXVR_ALLOC_7 */ #define CL28 0x7f /* Channel 28 Connection Label */ #define CIU28 0x80 /* Channel 28 In Use */ -#define nCIU28 0x0 #define CL29 0x7f00 /* Channel 29 Connection Label */ #define CIU29 0x8000 /* Channel 29 In Use */ -#define nCIU29 0x0 #define CL30 0x7f0000 /* Channel 30 Connection Label */ #define CIU30 0x800000 /* Channel 30 In Use */ -#define nCIU30 0x0 #define CL31 0x7f000000 /* Channel 31 Connection Label */ #define CIU31 0x80000000 /* Channel 31 In Use */ -#define nCIU31 0x0 /* Bit masks for MXVR_ALLOC_8 */ #define CL32 0x7f /* Channel 32 Connection Label */ #define CIU32 0x80 /* Channel 32 In Use */ -#define nCIU32 0x0 #define CL33 0x7f00 /* Channel 33 Connection Label */ #define CIU33 0x8000 /* Channel 33 In Use */ -#define nCIU33 0x0 #define CL34 0x7f0000 /* Channel 34 Connection Label */ #define CIU34 0x800000 /* Channel 34 In Use */ -#define nCIU34 0x0 #define CL35 0x7f000000 /* Channel 35 Connection Label */ #define CIU35 0x80000000 /* Channel 35 In Use */ -#define nCIU35 0x0 /* Bit masks for MXVR_ALLOC_9 */ #define CL36 0x7f /* Channel 36 Connection Label */ #define CIU36 0x80 /* Channel 36 In Use */ -#define nCIU36 0x0 #define CL37 0x7f00 /* Channel 37 Connection Label */ #define CIU37 0x8000 /* Channel 37 In Use */ -#define nCIU37 0x0 #define CL38 0x7f0000 /* Channel 38 Connection Label */ #define CIU38 0x800000 /* Channel 38 In Use */ -#define nCIU38 0x0 #define CL39 0x7f000000 /* Channel 39 Connection Label */ #define CIU39 0x80000000 /* Channel 39 In Use */ -#define nCIU39 0x0 /* Bit masks for MXVR_ALLOC_10 */ #define CL40 0x7f /* Channel 40 Connection Label */ #define CIU40 0x80 /* Channel 40 In Use */ -#define nCIU40 0x0 #define CL41 0x7f00 /* Channel 41 Connection Label */ #define CIU41 0x8000 /* Channel 41 In Use */ -#define nCIU41 0x0 #define CL42 0x7f0000 /* Channel 42 Connection Label */ #define CIU42 0x800000 /* Channel 42 In Use */ -#define nCIU42 0x0 #define CL43 0x7f000000 /* Channel 43 Connection Label */ #define CIU43 0x80000000 /* Channel 43 In Use */ -#define nCIU43 0x0 /* Bit masks for MXVR_ALLOC_11 */ #define CL44 0x7f /* Channel 44 Connection Label */ #define CIU44 0x80 /* Channel 44 In Use */ -#define nCIU44 0x0 #define CL45 0x7f00 /* Channel 45 Connection Label */ #define CIU45 0x8000 /* Channel 45 In Use */ -#define nCIU45 0x0 #define CL46 0x7f0000 /* Channel 46 Connection Label */ #define CIU46 0x800000 /* Channel 46 In Use */ -#define nCIU46 0x0 #define CL47 0x7f000000 /* Channel 47 Connection Label */ #define CIU47 0x80000000 /* Channel 47 In Use */ -#define nCIU47 0x0 /* Bit masks for MXVR_ALLOC_12 */ #define CL48 0x7f /* Channel 48 Connection Label */ #define CIU48 0x80 /* Channel 48 In Use */ -#define nCIU48 0x0 #define CL49 0x7f00 /* Channel 49 Connection Label */ #define CIU49 0x8000 /* Channel 49 In Use */ -#define nCIU49 0x0 #define CL50 0x7f0000 /* Channel 50 Connection Label */ #define CIU50 0x800000 /* Channel 50 In Use */ -#define nCIU50 0x0 #define CL51 0x7f000000 /* Channel 51 Connection Label */ #define CIU51 0x80000000 /* Channel 51 In Use */ -#define nCIU51 0x0 /* Bit masks for MXVR_ALLOC_13 */ #define CL52 0x7f /* Channel 52 Connection Label */ #define CIU52 0x80 /* Channel 52 In Use */ -#define nCIU52 0x0 #define CL53 0x7f00 /* Channel 53 Connection Label */ #define CIU53 0x8000 /* Channel 53 In Use */ -#define nCIU53 0x0 #define CL54 0x7f0000 /* Channel 54 Connection Label */ #define CIU54 0x800000 /* Channel 54 In Use */ -#define nCIU54 0x0 #define CL55 0x7f000000 /* Channel 55 Connection Label */ #define CIU55 0x80000000 /* Channel 55 In Use */ -#define nCIU55 0x0 /* Bit masks for MXVR_ALLOC_14 */ #define CL56 0x7f /* Channel 56 Connection Label */ #define CIU56 0x80 /* Channel 56 In Use */ -#define nCIU56 0x0 #define CL57 0x7f00 /* Channel 57 Connection Label */ #define CIU57 0x8000 /* Channel 57 In Use */ -#define nCIU57 0x0 #define CL58 0x7f0000 /* Channel 58 Connection Label */ #define CIU58 0x800000 /* Channel 58 In Use */ -#define nCIU58 0x0 #define CL59 0x7f000000 /* Channel 59 Connection Label */ #define CIU59 0x80000000 /* Channel 59 In Use */ -#define nCIU59 0x0 /* MXVR_SYNC_LCHAN_0 Masks */ @@ -1926,19 +1669,13 @@ /* Bit masks for MXVR_DMAx_CONFIG */ #define MDMAEN 0x1 /* DMA Channel Enable */ -#define nMDMAEN 0x0 #define DD 0x2 /* DMA Channel Direction */ -#define nDD 0x0 #define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */ -#define nBY4SWAPEN 0x0 #define LCHAN 0x3c0 /* DMA Channel Logical Channel */ #define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */ -#define nBITSWAPEN 0x0 #define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */ -#define nBY2SWAPEN 0x0 #define MFLOW 0x7000 /* DMA Channel Operation Flow */ #define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */ -#define nFIXEDPM 0x0 #define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */ #define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */ #define COUNTPOS 0x1c000000 /* DMA Channel Count Position */ @@ -1946,94 +1683,71 @@ /* Bit masks for MXVR_AP_CTL */ #define STARTAP 0x1 /* Start Asynchronous Packet Transmission */ -#define nSTARTAP 0x0 #define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */ -#define nCANCELAP 0x0 #define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */ -#define nRESETAP 0x0 #define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */ -#define nAPRBE0 0x0 #define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */ -#define nAPRBE1 0x0 /* Bit masks for MXVR_APRB_START_ADDR */ -#define MXVR_APRB_START_ADDR 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */ +#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */ /* Bit masks for MXVR_APRB_CURR_ADDR */ -#define MXVR_APRB_CURR_ADDR 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */ +#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */ /* Bit masks for MXVR_APTB_START_ADDR */ -#define MXVR_APTB_START_ADDR 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */ +#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */ /* Bit masks for MXVR_APTB_CURR_ADDR */ -#define MXVR_APTB_CURR_ADDR 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */ +#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */ /* Bit masks for MXVR_CM_CTL */ #define STARTCM 0x1 /* Start Control Message Transmission */ -#define nSTARTCM 0x0 #define CANCELCM 0x2 /* Cancel Control Message Transmission */ -#define nCANCELCM 0x0 #define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */ -#define nCMRBE0 0x0 #define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */ -#define nCMRBE1 0x0 #define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */ -#define nCMRBE2 0x0 #define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */ -#define nCMRBE3 0x0 #define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */ -#define nCMRBE4 0x0 #define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */ -#define nCMRBE5 0x0 #define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */ -#define nCMRBE6 0x0 #define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */ -#define nCMRBE7 0x0 #define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */ -#define nCMRBE8 0x0 #define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */ -#define nCMRBE9 0x0 #define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */ -#define nCMRBE10 0x0 #define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */ -#define nCMRBE11 0x0 #define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */ -#define nCMRBE12 0x0 #define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */ -#define nCMRBE13 0x0 #define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */ -#define nCMRBE14 0x0 #define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */ -#define nCMRBE15 0x0 /* Bit masks for MXVR_CMRB_START_ADDR */ -#define MXVR_CMRB_START_ADDR 0x1fffffe /* Control Message Receive Buffer Start Address */ +#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */ /* Bit masks for MXVR_CMRB_CURR_ADDR */ -#define MXVR_CMRB_CURR_ADDR 0xffffffff /* Control Message Receive Buffer Current Address */ +#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */ /* Bit masks for MXVR_CMTB_START_ADDR */ -#define MXVR_CMTB_START_ADDR 0x1fffffe /* Control Message Transmit Buffer Start Address */ +#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */ /* Bit masks for MXVR_CMTB_CURR_ADDR */ -#define MXVR_CMTB_CURR_ADDR 0xffffffff /* Control Message Transmit Buffer Current Address */ +#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */ /* Bit masks for MXVR_RRDB_START_ADDR */ -#define MXVR_RRDB_START_ADDR 0x1fffffe /* Remote Read Buffer Start Address */ +#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */ /* Bit masks for MXVR_RRDB_CURR_ADDR */ -#define MXVR_RRDB_CURR_ADDR 0xffffffff /* Remote Read Buffer Current Address */ +#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */ /* Bit masks for MXVR_PAT_DATAx */ @@ -2045,136 +1759,72 @@ /* Bit masks for MXVR_PAT_EN_0 */ #define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ -#define nMATCH_EN_0_0 0x0 #define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ -#define nMATCH_EN_0_1 0x0 #define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ -#define nMATCH_EN_0_2 0x0 #define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ -#define nMATCH_EN_0_3 0x0 #define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ -#define nMATCH_EN_0_4 0x0 #define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ -#define nMATCH_EN_0_5 0x0 #define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ -#define nMATCH_EN_0_6 0x0 #define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ -#define nMATCH_EN_0_7 0x0 #define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ -#define nMATCH_EN_1_0 0x0 #define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ -#define nMATCH_EN_1_1 0x0 #define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ -#define nMATCH_EN_1_2 0x0 #define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ -#define nMATCH_EN_1_3 0x0 #define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ -#define nMATCH_EN_1_4 0x0 #define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ -#define nMATCH_EN_1_5 0x0 #define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ -#define nMATCH_EN_1_6 0x0 #define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ -#define nMATCH_EN_1_7 0x0 #define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ -#define nMATCH_EN_2_0 0x0 #define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ -#define nMATCH_EN_2_1 0x0 #define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ -#define nMATCH_EN_2_2 0x0 #define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ -#define nMATCH_EN_2_3 0x0 #define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ -#define nMATCH_EN_2_4 0x0 #define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ -#define nMATCH_EN_2_5 0x0 #define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ -#define nMATCH_EN_2_6 0x0 #define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ -#define nMATCH_EN_2_7 0x0 #define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ -#define nMATCH_EN_3_0 0x0 #define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ -#define nMATCH_EN_3_1 0x0 #define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ -#define nMATCH_EN_3_2 0x0 #define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ -#define nMATCH_EN_3_3 0x0 #define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ -#define nMATCH_EN_3_4 0x0 #define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ -#define nMATCH_EN_3_5 0x0 #define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ -#define nMATCH_EN_3_6 0x0 #define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ -#define nMATCH_EN_3_7 0x0 /* Bit masks for MXVR_PAT_EN_1 */ #define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ -#define nMATCH_EN_0_0 0x0 #define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ -#define nMATCH_EN_0_1 0x0 #define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ -#define nMATCH_EN_0_2 0x0 #define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ -#define nMATCH_EN_0_3 0x0 #define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ -#define nMATCH_EN_0_4 0x0 #define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ -#define nMATCH_EN_0_5 0x0 #define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ -#define nMATCH_EN_0_6 0x0 #define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ -#define nMATCH_EN_0_7 0x0 #define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ -#define nMATCH_EN_1_0 0x0 #define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ -#define nMATCH_EN_1_1 0x0 #define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ -#define nMATCH_EN_1_2 0x0 #define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ -#define nMATCH_EN_1_3 0x0 #define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ -#define nMATCH_EN_1_4 0x0 #define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ -#define nMATCH_EN_1_5 0x0 #define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ -#define nMATCH_EN_1_6 0x0 #define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ -#define nMATCH_EN_1_7 0x0 #define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ -#define nMATCH_EN_2_0 0x0 #define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ -#define nMATCH_EN_2_1 0x0 #define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ -#define nMATCH_EN_2_2 0x0 #define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ -#define nMATCH_EN_2_3 0x0 #define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ -#define nMATCH_EN_2_4 0x0 #define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ -#define nMATCH_EN_2_5 0x0 #define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ -#define nMATCH_EN_2_6 0x0 #define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ -#define nMATCH_EN_2_7 0x0 #define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ -#define nMATCH_EN_3_0 0x0 #define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ -#define nMATCH_EN_3_1 0x0 #define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ -#define nMATCH_EN_3_2 0x0 #define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ -#define nMATCH_EN_3_3 0x0 #define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ -#define nMATCH_EN_3_4 0x0 #define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ -#define nMATCH_EN_3_5 0x0 #define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ -#define nMATCH_EN_3_6 0x0 #define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ -#define nMATCH_EN_3_7 0x0 /* Bit masks for MXVR_FRAME_CNT_0 */ @@ -2188,226 +1838,166 @@ #define TX_CH0 0x3f /* Transmit Channel 0 */ #define MUTE_CH0 0x80 /* Mute Channel 0 */ -#define nMUTE_CH0 0x0 #define TX_CH1 0x3f00 /* Transmit Channel 0 */ #define MUTE_CH1 0x8000 /* Mute Channel 0 */ -#define nMUTE_CH1 0x0 #define TX_CH2 0x3f0000 /* Transmit Channel 0 */ #define MUTE_CH2 0x800000 /* Mute Channel 0 */ -#define nMUTE_CH2 0x0 #define TX_CH3 0x3f000000 /* Transmit Channel 0 */ #define MUTE_CH3 0x80000000 /* Mute Channel 0 */ -#define nMUTE_CH3 0x0 /* Bit masks for MXVR_ROUTING_1 */ #define TX_CH4 0x3f /* Transmit Channel 4 */ #define MUTE_CH4 0x80 /* Mute Channel 4 */ -#define nMUTE_CH4 0x0 #define TX_CH5 0x3f00 /* Transmit Channel 5 */ #define MUTE_CH5 0x8000 /* Mute Channel 5 */ -#define nMUTE_CH5 0x0 #define TX_CH6 0x3f0000 /* Transmit Channel 6 */ #define MUTE_CH6 0x800000 /* Mute Channel 6 */ -#define nMUTE_CH6 0x0 #define TX_CH7 0x3f000000 /* Transmit Channel 7 */ #define MUTE_CH7 0x80000000 /* Mute Channel 7 */ -#define nMUTE_CH7 0x0 /* Bit masks for MXVR_ROUTING_2 */ #define TX_CH8 0x3f /* Transmit Channel 8 */ #define MUTE_CH8 0x80 /* Mute Channel 8 */ -#define nMUTE_CH8 0x0 #define TX_CH9 0x3f00 /* Transmit Channel 9 */ #define MUTE_CH9 0x8000 /* Mute Channel 9 */ -#define nMUTE_CH9 0x0 #define TX_CH10 0x3f0000 /* Transmit Channel 10 */ #define MUTE_CH10 0x800000 /* Mute Channel 10 */ -#define nMUTE_CH10 0x0 #define TX_CH11 0x3f000000 /* Transmit Channel 11 */ #define MUTE_CH11 0x80000000 /* Mute Channel 11 */ -#define nMUTE_CH11 0x0 /* Bit masks for MXVR_ROUTING_3 */ #define TX_CH12 0x3f /* Transmit Channel 12 */ #define MUTE_CH12 0x80 /* Mute Channel 12 */ -#define nMUTE_CH12 0x0 #define TX_CH13 0x3f00 /* Transmit Channel 13 */ #define MUTE_CH13 0x8000 /* Mute Channel 13 */ -#define nMUTE_CH13 0x0 #define TX_CH14 0x3f0000 /* Transmit Channel 14 */ #define MUTE_CH14 0x800000 /* Mute Channel 14 */ -#define nMUTE_CH14 0x0 #define TX_CH15 0x3f000000 /* Transmit Channel 15 */ #define MUTE_CH15 0x80000000 /* Mute Channel 15 */ -#define nMUTE_CH15 0x0 /* Bit masks for MXVR_ROUTING_4 */ #define TX_CH16 0x3f /* Transmit Channel 16 */ #define MUTE_CH16 0x80 /* Mute Channel 16 */ -#define nMUTE_CH16 0x0 #define TX_CH17 0x3f00 /* Transmit Channel 17 */ #define MUTE_CH17 0x8000 /* Mute Channel 17 */ -#define nMUTE_CH17 0x0 #define TX_CH18 0x3f0000 /* Transmit Channel 18 */ #define MUTE_CH18 0x800000 /* Mute Channel 18 */ -#define nMUTE_CH18 0x0 #define TX_CH19 0x3f000000 /* Transmit Channel 19 */ #define MUTE_CH19 0x80000000 /* Mute Channel 19 */ -#define nMUTE_CH19 0x0 /* Bit masks for MXVR_ROUTING_5 */ #define TX_CH20 0x3f /* Transmit Channel 20 */ #define MUTE_CH20 0x80 /* Mute Channel 20 */ -#define nMUTE_CH20 0x0 #define TX_CH21 0x3f00 /* Transmit Channel 21 */ #define MUTE_CH21 0x8000 /* Mute Channel 21 */ -#define nMUTE_CH21 0x0 #define TX_CH22 0x3f0000 /* Transmit Channel 22 */ #define MUTE_CH22 0x800000 /* Mute Channel 22 */ -#define nMUTE_CH22 0x0 #define TX_CH23 0x3f000000 /* Transmit Channel 23 */ #define MUTE_CH23 0x80000000 /* Mute Channel 23 */ -#define nMUTE_CH23 0x0 /* Bit masks for MXVR_ROUTING_6 */ #define TX_CH24 0x3f /* Transmit Channel 24 */ #define MUTE_CH24 0x80 /* Mute Channel 24 */ -#define nMUTE_CH24 0x0 #define TX_CH25 0x3f00 /* Transmit Channel 25 */ #define MUTE_CH25 0x8000 /* Mute Channel 25 */ -#define nMUTE_CH25 0x0 #define TX_CH26 0x3f0000 /* Transmit Channel 26 */ #define MUTE_CH26 0x800000 /* Mute Channel 26 */ -#define nMUTE_CH26 0x0 #define TX_CH27 0x3f000000 /* Transmit Channel 27 */ #define MUTE_CH27 0x80000000 /* Mute Channel 27 */ -#define nMUTE_CH27 0x0 /* Bit masks for MXVR_ROUTING_7 */ #define TX_CH28 0x3f /* Transmit Channel 28 */ #define MUTE_CH28 0x80 /* Mute Channel 28 */ -#define nMUTE_CH28 0x0 #define TX_CH29 0x3f00 /* Transmit Channel 29 */ #define MUTE_CH29 0x8000 /* Mute Channel 29 */ -#define nMUTE_CH29 0x0 #define TX_CH30 0x3f0000 /* Transmit Channel 30 */ #define MUTE_CH30 0x800000 /* Mute Channel 30 */ -#define nMUTE_CH30 0x0 #define TX_CH31 0x3f000000 /* Transmit Channel 31 */ #define MUTE_CH31 0x80000000 /* Mute Channel 31 */ -#define nMUTE_CH31 0x0 /* Bit masks for MXVR_ROUTING_8 */ #define TX_CH32 0x3f /* Transmit Channel 32 */ #define MUTE_CH32 0x80 /* Mute Channel 32 */ -#define nMUTE_CH32 0x0 #define TX_CH33 0x3f00 /* Transmit Channel 33 */ #define MUTE_CH33 0x8000 /* Mute Channel 33 */ -#define nMUTE_CH33 0x0 #define TX_CH34 0x3f0000 /* Transmit Channel 34 */ #define MUTE_CH34 0x800000 /* Mute Channel 34 */ -#define nMUTE_CH34 0x0 #define TX_CH35 0x3f000000 /* Transmit Channel 35 */ #define MUTE_CH35 0x80000000 /* Mute Channel 35 */ -#define nMUTE_CH35 0x0 /* Bit masks for MXVR_ROUTING_9 */ #define TX_CH36 0x3f /* Transmit Channel 36 */ #define MUTE_CH36 0x80 /* Mute Channel 36 */ -#define nMUTE_CH36 0x0 #define TX_CH37 0x3f00 /* Transmit Channel 37 */ #define MUTE_CH37 0x8000 /* Mute Channel 37 */ -#define nMUTE_CH37 0x0 #define TX_CH38 0x3f0000 /* Transmit Channel 38 */ #define MUTE_CH38 0x800000 /* Mute Channel 38 */ -#define nMUTE_CH38 0x0 #define TX_CH39 0x3f000000 /* Transmit Channel 39 */ #define MUTE_CH39 0x80000000 /* Mute Channel 39 */ -#define nMUTE_CH39 0x0 /* Bit masks for MXVR_ROUTING_10 */ #define TX_CH40 0x3f /* Transmit Channel 40 */ #define MUTE_CH40 0x80 /* Mute Channel 40 */ -#define nMUTE_CH40 0x0 #define TX_CH41 0x3f00 /* Transmit Channel 41 */ #define MUTE_CH41 0x8000 /* Mute Channel 41 */ -#define nMUTE_CH41 0x0 #define TX_CH42 0x3f0000 /* Transmit Channel 42 */ #define MUTE_CH42 0x800000 /* Mute Channel 42 */ -#define nMUTE_CH42 0x0 #define TX_CH43 0x3f000000 /* Transmit Channel 43 */ #define MUTE_CH43 0x80000000 /* Mute Channel 43 */ -#define nMUTE_CH43 0x0 /* Bit masks for MXVR_ROUTING_11 */ #define TX_CH44 0x3f /* Transmit Channel 44 */ #define MUTE_CH44 0x80 /* Mute Channel 44 */ -#define nMUTE_CH44 0x0 #define TX_CH45 0x3f00 /* Transmit Channel 45 */ #define MUTE_CH45 0x8000 /* Mute Channel 45 */ -#define nMUTE_CH45 0x0 #define TX_CH46 0x3f0000 /* Transmit Channel 46 */ #define MUTE_CH46 0x800000 /* Mute Channel 46 */ -#define nMUTE_CH46 0x0 #define TX_CH47 0x3f000000 /* Transmit Channel 47 */ #define MUTE_CH47 0x80000000 /* Mute Channel 47 */ -#define nMUTE_CH47 0x0 /* Bit masks for MXVR_ROUTING_12 */ #define TX_CH48 0x3f /* Transmit Channel 48 */ #define MUTE_CH48 0x80 /* Mute Channel 48 */ -#define nMUTE_CH48 0x0 #define TX_CH49 0x3f00 /* Transmit Channel 49 */ #define MUTE_CH49 0x8000 /* Mute Channel 49 */ -#define nMUTE_CH49 0x0 #define TX_CH50 0x3f0000 /* Transmit Channel 50 */ #define MUTE_CH50 0x800000 /* Mute Channel 50 */ -#define nMUTE_CH50 0x0 #define TX_CH51 0x3f000000 /* Transmit Channel 51 */ #define MUTE_CH51 0x80000000 /* Mute Channel 51 */ -#define nMUTE_CH51 0x0 /* Bit masks for MXVR_ROUTING_13 */ #define TX_CH52 0x3f /* Transmit Channel 52 */ #define MUTE_CH52 0x80 /* Mute Channel 52 */ -#define nMUTE_CH52 0x0 #define TX_CH53 0x3f00 /* Transmit Channel 53 */ #define MUTE_CH53 0x8000 /* Mute Channel 53 */ -#define nMUTE_CH53 0x0 #define TX_CH54 0x3f0000 /* Transmit Channel 54 */ #define MUTE_CH54 0x800000 /* Mute Channel 54 */ -#define nMUTE_CH54 0x0 #define TX_CH55 0x3f000000 /* Transmit Channel 55 */ #define MUTE_CH55 0x80000000 /* Mute Channel 55 */ -#define nMUTE_CH55 0x0 /* Bit masks for MXVR_ROUTING_14 */ #define TX_CH56 0x3f /* Transmit Channel 56 */ #define MUTE_CH56 0x80 /* Mute Channel 56 */ -#define nMUTE_CH56 0x0 #define TX_CH57 0x3f00 /* Transmit Channel 57 */ #define MUTE_CH57 0x8000 /* Mute Channel 57 */ -#define nMUTE_CH57 0x0 #define TX_CH58 0x3f0000 /* Transmit Channel 58 */ #define MUTE_CH58 0x800000 /* Mute Channel 58 */ -#define nMUTE_CH58 0x0 #define TX_CH59 0x3f000000 /* Transmit Channel 59 */ #define MUTE_CH59 0x80000000 /* Mute Channel 59 */ -#define nMUTE_CH59 0x0 /* Bit masks for MXVR_BLOCK_CNT */ @@ -2416,53 +2006,37 @@ /* Bit masks for MXVR_CLK_CTL */ #define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */ -#define nMXTALCEN 0x0 #define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */ -#define nMXTALFEN 0x0 #define MXTALMUL 0x30 /* MXVR Crystal Multiplier */ #define CLKX3SEL 0x80 /* Clock Generation Source Select */ -#define nCLKX3SEL 0x0 #define MMCLKEN 0x100 /* Master Clock Enable */ -#define nMMCLKEN 0x0 #define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */ #define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */ #define MBCLKEN 0x10000 /* Bit Clock Enable */ -#define nMBCLKEN 0x0 #define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */ #define INVRX 0x800000 /* Invert Receive Data */ -#define nINVRX 0x0 #define MFSEN 0x1000000 /* Frame Sync Enable */ -#define nMFSEN 0x0 #define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */ #define MFSSEL 0x60000000 /* Frame Sync Select */ #define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */ -#define nMFSSYNC 0x0 /* Bit masks for MXVR_CDRPLL_CTL */ #define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */ -#define nCDRSMEN 0x0 #define CDRRSTB 0x2 /* MXVR CDRPLL Reset */ -#define nCDRRSTB 0x0 #define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */ -#define nCDRSVCO 0x0 #define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */ -#define nCDRMODE 0x0 #define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */ #define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */ #define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */ #define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */ -#define nCDRSHPEN 0x0 #define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */ /* Bit masks for MXVR_FMPLL_CTL */ #define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */ -#define nFMSMEN 0x0 #define FMRSTB 0x2 /* MXVR FMPLL Reset */ -#define nFMRSTB 0x0 #define FMSVCO 0x4 /* MXVR FMPLL Start VCO */ -#define nFMSVCO 0x0 #define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */ #define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */ #define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */ @@ -2470,15 +2044,10 @@ /* Bit masks for MXVR_PIN_CTL */ #define MTXONBOD 0x1 /* MTXONB Open Drain Select */ -#define nMTXONBOD 0x0 #define MTXONBG 0x2 /* MTXONB Gates MTX Select */ -#define nMTXONBG 0x0 #define MFSOE 0x10 /* MFS Output Enable */ -#define nMFSOE 0x0 #define MFSGPSEL 0x20 /* MFS General Purpose Output Select */ -#define nMFSGPSEL 0x0 #define MFSGPDAT 0x40 /* MFS General Purpose Output Data */ -#define nMFSGPDAT 0x0 /* Bit masks for MXVR_SCLK_CNT */ @@ -2487,7 +2056,6 @@ /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ -#define nKPAD_EN 0x0 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ #define KPAD_ROWEN 0x1c00 /* Row Enable Width */ #define KPAD_COLEN 0xe000 /* Column Enable Width */ @@ -2509,29 +2077,21 @@ /* Bit masks for KPAD_STAT */ #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ -#define nKPAD_IRQ 0x0 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ #define KPAD_PRESSED 0x8 /* Key press current status */ -#define nKPAD_PRESSED 0x0 /* Bit masks for KPAD_SOFTEVAL */ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -#define nKPAD_SOFTEVAL_E 0x0 /* Bit masks for SDH_COMMAND */ #define CMD_IDX 0x3f /* Command Index */ #define CMD_RSP 0x40 /* Response */ -#define nCMD_RSP 0x0 #define CMD_L_RSP 0x80 /* Long Response */ -#define nCMD_L_RSP 0x0 #define CMD_INT_E 0x100 /* Command Interrupt */ -#define nCMD_INT_E 0x0 #define CMD_PEND_E 0x200 /* Command Pending */ -#define nCMD_PEND_E 0x0 #define CMD_E 0x400 /* Command Enable */ -#define nCMD_E 0x0 /* Bit masks for SDH_PWR_CTL */ @@ -2540,21 +2100,15 @@ #define TBD 0x3c /* TBD */ #endif #define SD_CMD_OD 0x40 /* Open Drain Output */ -#define nSD_CMD_OD 0x0 #define ROD_CTL 0x80 /* Rod Control */ -#define nROD_CTL 0x0 /* Bit masks for SDH_CLK_CTL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define nCLK_E 0x0 #define PWR_SV_E 0x200 /* Power Save Enable */ -#define nPWR_SV_E 0x0 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define nCLKDIV_BYPASS 0x0 #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ -#define nWIDE_BUS 0x0 /* Bit masks for SDH_RESP_CMD */ @@ -2563,133 +2117,74 @@ /* Bit masks for SDH_DATA_CTL */ #define DTX_E 0x1 /* Data Transfer Enable */ -#define nDTX_E 0x0 #define DTX_DIR 0x2 /* Data Transfer Direction */ -#define nDTX_DIR 0x0 #define DTX_MODE 0x4 /* Data Transfer Mode */ -#define nDTX_MODE 0x0 #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define nDTX_DMA_E 0x0 #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ /* Bit masks for SDH_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define nCMD_CRC_FAIL 0x0 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define nDAT_CRC_FAIL 0x0 -#define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define nCMD_TIMEOUT 0x0 -#define DAT_TIMEOUT 0x8 /* Data Time Out */ -#define nDAT_TIMEOUT 0x0 +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ #define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define nTX_UNDERRUN 0x0 #define RX_OVERRUN 0x20 /* Receive Overrun */ -#define nRX_OVERRUN 0x0 #define CMD_RESP_END 0x40 /* CMD Response End */ -#define nCMD_RESP_END 0x0 #define CMD_SENT 0x80 /* CMD Sent */ -#define nCMD_SENT 0x0 #define DAT_END 0x100 /* Data End */ -#define nDAT_END 0x0 #define START_BIT_ERR 0x200 /* Start Bit Error */ -#define nSTART_BIT_ERR 0x0 #define DAT_BLK_END 0x400 /* Data Block End */ -#define nDAT_BLK_END 0x0 #define CMD_ACT 0x800 /* CMD Active */ -#define nCMD_ACT 0x0 #define TX_ACT 0x1000 /* Transmit Active */ -#define nTX_ACT 0x0 #define RX_ACT 0x2000 /* Receive Active */ -#define nRX_ACT 0x0 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define nTX_FIFO_STAT 0x0 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define nRX_FIFO_STAT 0x0 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define nTX_FIFO_FULL 0x0 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define nRX_FIFO_FULL 0x0 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define nTX_FIFO_ZERO 0x0 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define nRX_DAT_ZERO 0x0 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define nTX_DAT_RDY 0x0 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ -#define nRX_FIFO_RDY 0x0 /* Bit masks for SDH_STATUS_CLR */ #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define nCMD_CRC_FAIL_STAT 0x0 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define nDAT_CRC_FAIL_STAT 0x0 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define nCMD_TIMEOUT_STAT 0x0 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define nDAT_TIMEOUT_STAT 0x0 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define nTX_UNDERRUN_STAT 0x0 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define nRX_OVERRUN_STAT 0x0 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define nCMD_RESP_END_STAT 0x0 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define nCMD_SENT_STAT 0x0 #define DAT_END_STAT 0x100 /* Data End Status */ -#define nDAT_END_STAT 0x0 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define nSTART_BIT_ERR_STAT 0x0 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ -#define nDAT_BLK_END_STAT 0x0 /* Bit masks for SDH_MASK0 */ #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define nCMD_CRC_FAIL_MASK 0x0 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define nDAT_CRC_FAIL_MASK 0x0 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define nCMD_TIMEOUT_MASK 0x0 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define nDAT_TIMEOUT_MASK 0x0 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define nTX_UNDERRUN_MASK 0x0 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define nRX_OVERRUN_MASK 0x0 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define nCMD_RESP_END_MASK 0x0 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define nCMD_SENT_MASK 0x0 #define DAT_END_MASK 0x100 /* Data End Mask */ -#define nDAT_END_MASK 0x0 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define nSTART_BIT_ERR_MASK 0x0 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define nDAT_BLK_END_MASK 0x0 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define nCMD_ACT_MASK 0x0 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define nTX_ACT_MASK 0x0 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define nRX_ACT_MASK 0x0 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define nTX_FIFO_STAT_MASK 0x0 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define nRX_FIFO_STAT_MASK 0x0 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define nTX_FIFO_FULL_MASK 0x0 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define nRX_FIFO_FULL_MASK 0x0 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define nTX_FIFO_ZERO_MASK 0x0 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define nRX_DAT_ZERO_MASK 0x0 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define nTX_DAT_RDY_MASK 0x0 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ -#define nRX_FIFO_RDY_MASK 0x0 /* Bit masks for SDH_FIFO_CNT */ @@ -2698,73 +2193,47 @@ /* Bit masks for SDH_E_STATUS */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define nSDIO_INT_DET 0x0 #define SD_CARD_DET 0x10 /* SD Card Detect */ -#define nSD_CARD_DET 0x0 /* Bit masks for SDH_E_MASK */ #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define nSDIO_MSK 0x0 #define SCD_MSK 0x40 /* Mask Card Detect */ -#define nSCD_MSK 0x0 /* Bit masks for SDH_CFG */ #define CLKS_EN 0x1 /* Clocks Enable */ -#define nCLKS_EN 0x0 #define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define nSD4E 0x0 #define MWE 0x8 /* Moving Window Enable */ -#define nMWE 0x0 #define SD_RST 0x10 /* SDMMC Reset */ -#define nSD_RST 0x0 #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define nPUP_SDDAT 0x0 #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define nPUP_SDDAT3 0x0 #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ -#define nPD_SDDAT3 0x0 /* Bit masks for SDH_RD_WAIT_EN */ #define RWR 0x1 /* Read Wait Request */ -#define nRWR 0x0 /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ -#define nPIO_START 0x0 #define MULTI_START 0x2 /* Start Multi-DMA Op */ -#define nMULTI_START 0x0 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */ -#define nULTRA_START 0x0 #define XFER_DIR 0x8 /* Transfer Direction */ -#define nXFER_DIR 0x0 #define IORDY_EN 0x10 /* IORDY Enable */ -#define nIORDY_EN 0x0 #define FIFO_FLUSH 0x20 /* Flush FIFOs */ -#define nFIFO_FLUSH 0x0 #define SOFT_RST 0x40 /* Soft Reset */ -#define nSOFT_RST 0x0 #define DEV_RST 0x80 /* Device Reset */ -#define nDEV_RST 0x0 #define TFRCNT_RST 0x100 /* Trans Count Reset */ -#define nTFRCNT_RST 0x0 #define END_ON_TERM 0x200 /* End/Terminate Select */ -#define nEND_ON_TERM 0x0 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ -#define nPIO_USE_DMA 0x0 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ /* Bit masks for ATAPI_STATUS */ #define PIO_XFER_ON 0x1 /* PIO transfer in progress */ -#define nPIO_XFER_ON 0x0 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ -#define nMULTI_XFER_ON 0x0 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ -#define nULTRA_XFER_ON 0x0 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ /* Bit masks for ATAPI_DEV_ADDR */ @@ -2774,66 +2243,39 @@ /* Bit masks for ATAPI_INT_MASK */ #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ -#define nATAPI_DEV_INT_MASK 0x0 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ -#define nPIO_DONE_MASK 0x0 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ -#define nMULTI_DONE_MASK 0x0 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ -#define nUDMAIN_DONE_MASK 0x0 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ -#define nUDMAOUT_DONE_MASK 0x0 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ -#define nHOST_TERM_XFER_MASK 0x0 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ -#define nMULTI_TERM_MASK 0x0 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ -#define nUDMAIN_TERM_MASK 0x0 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ -#define nUDMAOUT_TERM_MASK 0x0 /* Bit masks for ATAPI_INT_STATUS */ #define ATAPI_DEV_INT 0x1 /* Device interrupt status */ -#define nATAPI_DEV_INT 0x0 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ -#define nPIO_DONE_INT 0x0 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ -#define nMULTI_DONE_INT 0x0 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ -#define nUDMAIN_DONE_INT 0x0 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ -#define nUDMAOUT_DONE_INT 0x0 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ -#define nHOST_TERM_XFER_INT 0x0 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ -#define nMULTI_TERM_INT 0x0 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ -#define nUDMAIN_TERM_INT 0x0 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ -#define nUDMAOUT_TERM_INT 0x0 /* Bit masks for ATAPI_LINE_STATUS */ #define ATAPI_INTR 0x1 /* Device interrupt to host line status */ -#define nATAPI_INTR 0x0 #define ATAPI_DASP 0x2 /* Device dasp to host line status */ -#define nATAPI_DASP 0x0 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ -#define nATAPI_CS0N 0x0 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ -#define nATAPI_CS1N 0x0 #define ATAPI_ADDR 0x70 /* ATAPI address line status */ #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ -#define nATAPI_DMAREQ 0x0 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ -#define nATAPI_DMAACKN 0x0 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */ -#define nATAPI_DIOWN 0x0 #define ATAPI_DIORN 0x400 /* ATAPI read line status */ -#define nATAPI_DIORN 0x0 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ -#define nATAPI_IORDY 0x0 /* Bit masks for ATAPI_SM_STATE */ @@ -2845,7 +2287,6 @@ /* Bit masks for ATAPI_TERMINATE */ #define ATAPI_HOST_TERM 0x1 /* Host terminationation */ -#define nATAPI_HOST_TERM 0x0 /* Bit masks for ATAPI_REG_TIM_0 */ @@ -2900,41 +2341,26 @@ /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ -#define nTIMEN8 0x0 #define TIMEN9 0x2 /* Timer 9 Enable */ -#define nTIMEN9 0x0 #define TIMEN10 0x4 /* Timer 10 Enable */ -#define nTIMEN10 0x0 /* Bit masks for TIMER_DISABLE1 */ #define TIMDIS8 0x1 /* Timer 8 Disable */ -#define nTIMDIS8 0x0 #define TIMDIS9 0x2 /* Timer 9 Disable */ -#define nTIMDIS9 0x0 #define TIMDIS10 0x4 /* Timer 10 Disable */ -#define nTIMDIS10 0x0 /* Bit masks for TIMER_STATUS1 */ #define TIMIL8 0x1 /* Timer 8 Interrupt */ -#define nTIMIL8 0x0 #define TIMIL9 0x2 /* Timer 9 Interrupt */ -#define nTIMIL9 0x0 #define TIMIL10 0x4 /* Timer 10 Interrupt */ -#define nTIMIL10 0x0 #define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ -#define nTOVF_ERR8 0x0 #define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ -#define nTOVF_ERR9 0x0 #define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ -#define nTOVF_ERR10 0x0 #define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ -#define nTRUN8 0x0 #define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ -#define nTRUN9 0x0 #define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ -#define nTRUN10 0x0 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ @@ -2945,131 +2371,77 @@ /* Bit masks for USB_POWER */ #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define nENABLE_SUSPENDM 0x0 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define nSUSPEND_MODE 0x0 #define RESUME_MODE 0x4 /* DMA Mode */ -#define nRESUME_MODE 0x0 #define RESET 0x8 /* Reset indicator */ -#define nRESET 0x0 #define HS_MODE 0x10 /* High Speed mode indicator */ -#define nHS_MODE 0x0 #define HS_ENABLE 0x20 /* high Speed Enable */ -#define nHS_ENABLE 0x0 #define SOFT_CONN 0x40 /* Soft connect */ -#define nSOFT_CONN 0x0 #define ISO_UPDATE 0x80 /* Isochronous update */ -#define nISO_UPDATE 0x0 /* Bit masks for USB_INTRTX */ #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define nEP0_TX 0x0 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define nEP1_TX 0x0 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define nEP2_TX 0x0 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define nEP3_TX 0x0 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define nEP4_TX 0x0 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define nEP5_TX 0x0 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define nEP6_TX 0x0 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ -#define nEP7_TX 0x0 /* Bit masks for USB_INTRRX */ #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define nEP1_RX 0x0 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define nEP2_RX 0x0 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define nEP3_RX 0x0 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define nEP4_RX 0x0 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define nEP5_RX 0x0 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define nEP6_RX 0x0 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ -#define nEP7_RX 0x0 /* Bit masks for USB_INTRTXE */ #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define nEP0_TX_E 0x0 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ -#define nEP1_TX_E 0x0 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ -#define nEP2_TX_E 0x0 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ -#define nEP3_TX_E 0x0 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ -#define nEP4_TX_E 0x0 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ -#define nEP5_TX_E 0x0 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ -#define nEP6_TX_E 0x0 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ -#define nEP7_TX_E 0x0 /* Bit masks for USB_INTRRXE */ #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ -#define nEP1_RX_E 0x0 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ -#define nEP2_RX_E 0x0 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ -#define nEP3_RX_E 0x0 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ -#define nEP4_RX_E 0x0 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ -#define nEP5_RX_E 0x0 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ -#define nEP6_RX_E 0x0 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ -#define nEP7_RX_E 0x0 /* Bit masks for USB_INTRUSB */ #define SUSPEND_B 0x1 /* Suspend indicator */ -#define nSUSPEND_B 0x0 #define RESUME_B 0x2 /* Resume indicator */ -#define nRESUME_B 0x0 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ -#define nRESET_OR_BABLE_B 0x0 #define SOF_B 0x8 /* Start of frame */ -#define nSOF_B 0x0 #define CONN_B 0x10 /* Connection indicator */ -#define nCONN_B 0x0 #define DISCON_B 0x20 /* Disconnect indicator */ -#define nDISCON_B 0x0 #define SESSION_REQ_B 0x40 /* Session Request */ -#define nSESSION_REQ_B 0x0 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ -#define nVBUS_ERROR_B 0x0 /* Bit masks for USB_INTRUSBE */ #define SUSPEND_BE 0x1 /* Suspend indicator int enable */ -#define nSUSPEND_BE 0x0 #define RESUME_BE 0x2 /* Resume indicator int enable */ -#define nRESUME_BE 0x0 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ -#define nRESET_OR_BABLE_BE 0x0 #define SOF_BE 0x8 /* Start of frame int enable */ -#define nSOF_BE 0x0 #define CONN_BE 0x10 /* Connection indicator int enable */ -#define nCONN_BE 0x0 #define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define nDISCON_BE 0x0 #define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define nSESSION_REQ_BE 0x0 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ -#define nVBUS_ERROR_BE 0x0 /* Bit masks for USB_FRAME */ @@ -3082,117 +2454,67 @@ /* Bit masks for USB_GLOBAL_CTL */ #define GLOBAL_ENA 0x1 /* enables USB module */ -#define nGLOBAL_ENA 0x0 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ -#define nEP1_TX_ENA 0x0 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ -#define nEP2_TX_ENA 0x0 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ -#define nEP3_TX_ENA 0x0 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ -#define nEP4_TX_ENA 0x0 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ -#define nEP5_TX_ENA 0x0 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ -#define nEP6_TX_ENA 0x0 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ -#define nEP7_TX_ENA 0x0 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ -#define nEP1_RX_ENA 0x0 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ -#define nEP2_RX_ENA 0x0 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ -#define nEP3_RX_ENA 0x0 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ -#define nEP4_RX_ENA 0x0 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define nEP5_RX_ENA 0x0 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define nEP6_RX_ENA 0x0 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ -#define nEP7_RX_ENA 0x0 /* Bit masks for USB_OTG_DEV_CTL */ #define SESSION 0x1 /* session indicator */ -#define nSESSION 0x0 #define HOST_REQ 0x2 /* Host negotiation request */ -#define nHOST_REQ 0x0 #define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define nHOST_MODE 0x0 #define VBUS0 0x8 /* Vbus level indicator[0] */ -#define nVBUS0 0x0 #define VBUS1 0x10 /* Vbus level indicator[1] */ -#define nVBUS1 0x0 #define LSDEV 0x20 /* Low-speed indicator */ -#define nLSDEV 0x0 #define FSDEV 0x40 /* Full or High-speed indicator */ -#define nFSDEV 0x0 #define B_DEVICE 0x80 /* A' or 'B' device indicator */ -#define nB_DEVICE 0x0 /* Bit masks for USB_OTG_VBUS_IRQ */ #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define nDRIVE_VBUS_ON 0x0 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define nDRIVE_VBUS_OFF 0x0 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define nCHRG_VBUS_START 0x0 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define nCHRG_VBUS_END 0x0 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define nDISCHRG_VBUS_START 0x0 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ -#define nDISCHRG_VBUS_END 0x0 /* Bit masks for USB_OTG_VBUS_MASK */ #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ -#define nDRIVE_VBUS_ON_ENA 0x0 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ -#define nDRIVE_VBUS_OFF_ENA 0x0 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ -#define nCHRG_VBUS_START_ENA 0x0 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ -#define nCHRG_VBUS_END_ENA 0x0 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define nDISCHRG_VBUS_START_ENA 0x0 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ -#define nDISCHRG_VBUS_END_ENA 0x0 /* Bit masks for USB_CSR0 */ #define RXPKTRDY 0x1 /* data packet receive indicator */ -#define nRXPKTRDY 0x0 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define nTXPKTRDY 0x0 #define STALL_SENT 0x4 /* STALL handshake sent */ -#define nSTALL_SENT 0x0 #define DATAEND 0x8 /* Data end indicator */ -#define nDATAEND 0x0 #define SETUPEND 0x10 /* Setup end */ -#define nSETUPEND 0x0 #define SENDSTALL 0x20 /* Send STALL handshake */ -#define nSENDSTALL 0x0 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define nSERVICED_RXPKTRDY 0x0 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define nSERVICED_SETUPEND 0x0 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define nFLUSHFIFO 0x0 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define nSTALL_RECEIVED_H 0x0 #define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define nSETUPPKT_H 0x0 #define ERROR_H 0x10 /* timeout error indicator host mode */ -#define nERROR_H 0x0 #define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define nREQPKT_H 0x0 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define nSTATUSPKT_H 0x0 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ -#define nNAK_TIMEOUT_H 0x0 /* Bit masks for USB_COUNT0 */ @@ -3213,37 +2535,21 @@ /* Bit masks for USB_TXCSR */ #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define nTXPKTRDY_T 0x0 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define nFIFO_NOT_EMPTY_T 0x0 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define nUNDERRUN_T 0x0 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define nFLUSHFIFO_T 0x0 #define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define nSTALL_SEND_T 0x0 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define nSTALL_SENT_T 0x0 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_T 0x0 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define nINCOMPTX_T 0x0 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_T 0x0 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define nFORCE_DATATOGGLE_T 0x0 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_T 0x0 #define ISO_T 0x4000 /* enable Isochronous transfers */ -#define nISO_T 0x0 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOSET_T 0x0 #define ERROR_TH 0x4 /* error condition host mode */ -#define nERROR_TH 0x0 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_TH 0x0 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ -#define nNAK_TIMEOUT_TH 0x0 /* Bit masks for USB_TXCOUNT */ @@ -3252,45 +2558,25 @@ /* Bit masks for USB_RXCSR */ #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define nRXPKTRDY_R 0x0 #define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define nFIFO_FULL_R 0x0 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define nOVERRUN_R 0x0 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define nDATAERROR_R 0x0 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define nFLUSHFIFO_R 0x0 #define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define nSTALL_SEND_R 0x0 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define nSTALL_SENT_R 0x0 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define nCLEAR_DATATOGGLE_R 0x0 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define nINCOMPRX_R 0x0 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define nDMAREQMODE_R 0x0 #define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define nDISNYET_R 0x0 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define nDMAREQ_ENA_R 0x0 #define ISO_R 0x4000 /* enable Isochronous transfers */ -#define nISO_R 0x0 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define nAUTOCLEAR_R 0x0 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define nERROR_RH 0x0 #define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define nREQPKT_RH 0x0 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define nSTALL_RECEIVED_RH 0x0 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ -#define nINCOMPRX_RH 0x0 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define nDMAREQMODE_RH 0x0 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ -#define nAUTOREQ_RH 0x0 /* Bit masks for USB_RXCOUNT */ @@ -3317,35 +2603,22 @@ /* Bit masks for USB_DMA_INTERRUPT */ #define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define nDMA0_INT 0x0 #define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define nDMA1_INT 0x0 #define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define nDMA2_INT 0x0 #define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define nDMA3_INT 0x0 #define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define nDMA4_INT 0x0 #define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define nDMA5_INT 0x0 #define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define nDMA6_INT 0x0 #define DMA7_INT 0x80 /* DMA7 pending interrupt */ -#define nDMA7_INT 0x0 /* Bit masks for USB_DMAxCONTROL */ #define DMA_ENA 0x1 /* DMA enable */ -#define nDMA_ENA 0x0 #define DIRECTION 0x2 /* direction of DMA transfer */ -#define nDIRECTION 0x0 #define MODE 0x4 /* DMA Bus error */ -#define nMODE 0x0 #define INT_ENA 0x8 /* Interrupt enable */ -#define nINT_ENA 0x0 #define EPNUM 0xf0 /* EP number */ #define BUSERROR 0x100 /* DMA Bus error */ -#define nBUSERROR 0x0 /* Bit masks for USB_DMAxADDRHIGH */ @@ -3366,26 +2639,16 @@ /* Bit masks for HMDMAx_CONTROL */ #define HMDMAEN 0x1 /* Handshake MDMA Enable */ -#define nHMDMAEN 0x0 #define REP 0x2 /* Handshake MDMA Request Polarity */ -#define nREP 0x0 #define UTE 0x8 /* Urgency Threshold Enable */ -#define nUTE 0x0 #define OIE 0x10 /* Overflow Interrupt Enable */ -#define nOIE 0x0 #define BDIE 0x20 /* Block Done Interrupt Enable */ -#define nBDIE 0x0 #define MBDI 0x40 /* Mask Block Done Interrupt */ -#define nMBDI 0x0 #define DRQ 0x300 /* Handshake MDMA Request Type */ #define RBC 0x1000 /* Force Reload of BCOUNT */ -#define nRBC 0x0 #define PS 0x2000 /* Pin Status */ -#define nPS 0x0 #define OI 0x4000 /* Overflow Interrupt Generated */ -#define nOI 0x0 #define BDI 0x8000 /* Block Done Interrupt Generated */ -#define nBDI 0x0 /* ******************************************* */ /* MULTI BIT MACRO ENUMERATIONS */ diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index a1b200fe6a1..2381ac50a2c 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -46,7 +46,7 @@ /* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */ -#define CHIPID 0xffc00014 +#define CHIPID 0xffc00014 /* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */ @@ -1512,231 +1512,144 @@ /* and MULTI BIT READ MACROS */ /* ********************************************************** */ +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + /* Bit masks for SIC_IAR0 */ -#define IRQ_PLL_WAKEUP 0x1 /* PLL Wakeup */ -#define nIRQ_PLL_WAKEUP 0x0 +#define PLL_WAKEUP 0x1 /* PLL Wakeup */ /* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */ -#define IRQ_DMA0_ERR 0x2 /* DMA Controller 0 Error */ -#define nIRQ_DMA0_ERR 0x0 -#define IRQ_EPPI0_ERR 0x4 /* EPPI0 Error */ -#define nIRQ_EPPI0_ERR 0x0 -#define IRQ_SPORT0_ERR 0x8 /* SPORT0 Error */ -#define nIRQ_SPORT0_ERR 0x0 -#define IRQ_SPORT1_ERR 0x10 /* SPORT1 Error */ -#define nIRQ_SPORT1_ERR 0x0 -#define IRQ_SPI0_ERR 0x20 /* SPI0 Error */ -#define nIRQ_SPI0_ERR 0x0 -#define IRQ_UART0_ERR 0x40 /* UART0 Error */ -#define nIRQ_UART0_ERR 0x0 -#define IRQ_RTC 0x80 /* Real-Time Clock */ -#define nIRQ_RTC 0x0 -#define IRQ_DMA12 0x100 /* DMA Channel 12 */ -#define nIRQ_DMA12 0x0 -#define IRQ_DMA0 0x200 /* DMA Channel 0 */ -#define nIRQ_DMA0 0x0 -#define IRQ_DMA1 0x400 /* DMA Channel 1 */ -#define nIRQ_DMA1 0x0 -#define IRQ_DMA2 0x800 /* DMA Channel 2 */ -#define nIRQ_DMA2 0x0 -#define IRQ_DMA3 0x1000 /* DMA Channel 3 */ -#define nIRQ_DMA3 0x0 -#define IRQ_DMA4 0x2000 /* DMA Channel 4 */ -#define nIRQ_DMA4 0x0 -#define IRQ_DMA6 0x4000 /* DMA Channel 6 */ -#define nIRQ_DMA6 0x0 -#define IRQ_DMA7 0x8000 /* DMA Channel 7 */ -#define nIRQ_DMA7 0x0 -#define IRQ_PINT0 0x80000 /* Pin Interrupt 0 */ -#define nIRQ_PINT0 0x0 -#define IRQ_PINT1 0x100000 /* Pin Interrupt 1 */ -#define nIRQ_PINT1 0x0 -#define IRQ_MDMA0 0x200000 /* Memory DMA Stream 0 */ -#define nIRQ_MDMA0 0x0 -#define IRQ_MDMA1 0x400000 /* Memory DMA Stream 1 */ -#define nIRQ_MDMA1 0x0 -#define IRQ_WDOG 0x800000 /* Watchdog Timer */ -#define nIRQ_WDOG 0x0 -#define IRQ_DMA1_ERR 0x1000000 /* DMA Controller 1 Error */ -#define nIRQ_DMA1_ERR 0x0 -#define IRQ_SPORT2_ERR 0x2000000 /* SPORT2 Error */ -#define nIRQ_SPORT2_ERR 0x0 -#define IRQ_SPORT3_ERR 0x4000000 /* SPORT3 Error */ -#define nIRQ_SPORT3_ERR 0x0 -#define IRQ_MXVR_SD 0x8000000 /* MXVR Synchronous Data */ -#define nIRQ_MXVR_SD 0x0 -#define IRQ_SPI1_ERR 0x10000000 /* SPI1 Error */ -#define nIRQ_SPI1_ERR 0x0 -#define IRQ_SPI2_ERR 0x20000000 /* SPI2 Error */ -#define nIRQ_SPI2_ERR 0x0 -#define IRQ_UART1_ERR 0x40000000 /* UART1 Error */ -#define nIRQ_UART1_ERR 0x0 -#define IRQ_UART2_ERR 0x80000000 /* UART2 Error */ -#define nIRQ_UART2_ERR 0x0 +#define DMA0_ERR 0x2 /* DMA Controller 0 Error */ +#define EPPI0_ERR 0x4 /* EPPI0 Error */ +#define SPORT0_ERR 0x8 /* SPORT0 Error */ +#define SPORT1_ERR 0x10 /* SPORT1 Error */ +#define SPI0_ERR 0x20 /* SPI0 Error */ +#define UART0_ERR 0x40 /* UART0 Error */ +#define RTC 0x80 /* Real-Time Clock */ +#define DMA12 0x100 /* DMA Channel 12 */ +#define DMA0 0x200 /* DMA Channel 0 */ +#define DMA1 0x400 /* DMA Channel 1 */ +#define DMA2 0x800 /* DMA Channel 2 */ +#define DMA3 0x1000 /* DMA Channel 3 */ +#define DMA4 0x2000 /* DMA Channel 4 */ +#define DMA6 0x4000 /* DMA Channel 6 */ +#define DMA7 0x8000 /* DMA Channel 7 */ +#define PINT0 0x80000 /* Pin Interrupt 0 */ +#define PINT1 0x100000 /* Pin Interrupt 1 */ +#define MDMA0 0x200000 /* Memory DMA Stream 0 */ +#define MDMA1 0x400000 /* Memory DMA Stream 1 */ +#define WDOG 0x800000 /* Watchdog Timer */ +#define DMA1_ERR 0x1000000 /* DMA Controller 1 Error */ +#define SPORT2_ERR 0x2000000 /* SPORT2 Error */ +#define SPORT3_ERR 0x4000000 /* SPORT3 Error */ +#define MXVR_SD 0x8000000 /* MXVR Synchronous Data */ +#define SPI1_ERR 0x10000000 /* SPI1 Error */ +#define SPI2_ERR 0x20000000 /* SPI2 Error */ +#define UART1_ERR 0x40000000 /* UART1 Error */ +#define UART2_ERR 0x80000000 /* UART2 Error */ /* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */ -#define IRQ_CAN0_ERR 0x1 /* CAN0 Error */ -#define nIRQ_CAN0_ERR 0x0 -#define IRQ_DMA18 0x2 /* DMA Channel 18 */ -#define nIRQ_DMA18 0x0 -#define IRQ_DMA19 0x4 /* DMA Channel 19 */ -#define nIRQ_DMA19 0x0 -#define IRQ_DMA20 0x8 /* DMA Channel 20 */ -#define nIRQ_DMA20 0x0 -#define IRQ_DMA21 0x10 /* DMA Channel 21 */ -#define nIRQ_DMA21 0x0 -#define IRQ_DMA13 0x20 /* DMA Channel 13 */ -#define nIRQ_DMA13 0x0 -#define IRQ_DMA14 0x40 /* DMA Channel 14 */ -#define nIRQ_DMA14 0x0 -#define IRQ_DMA5 0x80 /* DMA Channel 5 */ -#define nIRQ_DMA5 0x0 -#define IRQ_DMA23 0x100 /* DMA Channel 23 */ -#define nIRQ_DMA23 0x0 -#define IRQ_DMA8 0x200 /* DMA Channel 8 */ -#define nIRQ_DMA8 0x0 -#define IRQ_DMA9 0x400 /* DMA Channel 9 */ -#define nIRQ_DMA9 0x0 -#define IRQ_DMA10 0x800 /* DMA Channel 10 */ -#define nIRQ_DMA10 0x0 -#define IRQ_DMA11 0x1000 /* DMA Channel 11 */ -#define nIRQ_DMA11 0x0 -#define IRQ_TWI0 0x2000 /* TWI0 */ -#define nIRQ_TWI0 0x0 -#define IRQ_TWI1 0x4000 /* TWI1 */ -#define nIRQ_TWI1 0x0 -#define IRQ_CAN0_RX 0x8000 /* CAN0 Receive */ -#define nIRQ_CAN0_RX 0x0 -#define IRQ_CAN0_TX 0x10000 /* CAN0 Transmit */ -#define nIRQ_CAN0_TX 0x0 -#define IRQ_MDMA2 0x20000 /* Memory DMA Stream 0 */ -#define nIRQ_MDMA2 0x0 -#define IRQ_MDMA3 0x40000 /* Memory DMA Stream 1 */ -#define nIRQ_MDMA3 0x0 -#define IRQ_MXVR_STAT 0x80000 /* MXVR Status */ -#define nIRQ_MXVR_STAT 0x0 -#define IRQ_MXVR_CM 0x100000 /* MXVR Control Message */ -#define nIRQ_MXVR_CM 0x0 -#define IRQ_MXVR_AP 0x200000 /* MXVR Asynchronous Packet */ -#define nIRQ_MXVR_AP 0x0 -#define IRQ_EPPI1_ERR 0x400000 /* EPPI1 Error */ -#define nIRQ_EPPI1_ERR 0x0 -#define IRQ_EPPI2_ERR 0x800000 /* EPPI2 Error */ -#define nIRQ_EPPI2_ERR 0x0 -#define IRQ_UART3_ERR 0x1000000 /* UART3 Error */ -#define nIRQ_UART3_ERR 0x0 -#define IRQ_HOST_ERR 0x2000000 /* Host DMA Port Error */ -#define nIRQ_HOST_ERR 0x0 -#define IRQ_USB_ERR 0x4000000 /* USB Error */ -#define nIRQ_USB_ERR 0x0 -#define IRQ_PIXC_ERR 0x8000000 /* Pixel Compositor Error */ -#define nIRQ_PIXC_ERR 0x0 -#define IRQ_NFC_ERR 0x10000000 /* Nand Flash Controller Error */ -#define nIRQ_NFC_ERR 0x0 -#define IRQ_ATAPI_ERR 0x20000000 /* ATAPI Error */ -#define nIRQ_ATAPI_ERR 0x0 -#define IRQ_CAN1_ERR 0x40000000 /* CAN1 Error */ -#define nIRQ_CAN1_ERR 0x0 -#define IRQ_DMAR0_ERR 0x80000000 /* DMAR0 Overflow Error */ -#define nIRQ_DMAR0_ERR 0x0 -#define IRQ_DMAR1_ERR 0x80000000 /* DMAR1 Overflow Error */ -#define nIRQ_DMAR1_ERR 0x0 -#define IRQ_DMAR0 0x80000000 /* DMAR0 Block */ -#define nIRQ_DMAR0 0x0 -#define IRQ_DMAR1 0x80000000 /* DMAR1 Block */ -#define nIRQ_DMAR1 0x0 +#define CAN0_ERR 0x1 /* CAN0 Error */ +#define DMA18 0x2 /* DMA Channel 18 */ +#define DMA19 0x4 /* DMA Channel 19 */ +#define DMA20 0x8 /* DMA Channel 20 */ +#define DMA21 0x10 /* DMA Channel 21 */ +#define DMA13 0x20 /* DMA Channel 13 */ +#define DMA14 0x40 /* DMA Channel 14 */ +#define DMA5 0x80 /* DMA Channel 5 */ +#define DMA23 0x100 /* DMA Channel 23 */ +#define DMA8 0x200 /* DMA Channel 8 */ +#define DMA9 0x400 /* DMA Channel 9 */ +#define DMA10 0x800 /* DMA Channel 10 */ +#define DMA11 0x1000 /* DMA Channel 11 */ +#define TWI0 0x2000 /* TWI0 */ +#define TWI1 0x4000 /* TWI1 */ +#define CAN0_RX 0x8000 /* CAN0 Receive */ +#define CAN0_TX 0x10000 /* CAN0 Transmit */ +#define MDMA2 0x20000 /* Memory DMA Stream 0 */ +#define MDMA3 0x40000 /* Memory DMA Stream 1 */ +#define MXVR_STAT 0x80000 /* MXVR Status */ +#define MXVR_CM 0x100000 /* MXVR Control Message */ +#define MXVR_AP 0x200000 /* MXVR Asynchronous Packet */ +#define EPPI1_ERR 0x400000 /* EPPI1 Error */ +#define EPPI2_ERR 0x800000 /* EPPI2 Error */ +#define UART3_ERR 0x1000000 /* UART3 Error */ +#define HOST_ERR 0x2000000 /* Host DMA Port Error */ +#define USB_ERR 0x4000000 /* USB Error */ +#define PIXC_ERR 0x8000000 /* Pixel Compositor Error */ +#define NFC_ERR 0x10000000 /* Nand Flash Controller Error */ +#define ATAPI_ERR 0x20000000 /* ATAPI Error */ +#define CAN1_ERR 0x40000000 /* CAN1 Error */ +#define DMAR0_ERR 0x80000000 /* DMAR0 Overflow Error */ +#define DMAR1_ERR 0x80000000 /* DMAR1 Overflow Error */ +#define DMAR0 0x80000000 /* DMAR0 Block */ +#define DMAR1 0x80000000 /* DMAR1 Block */ /* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */ -#define IRQ_DMA15 0x1 /* DMA Channel 15 */ -#define nIRQ_DMA15 0x0 -#define IRQ_DMA16 0x2 /* DMA Channel 16 */ -#define nIRQ_DMA16 0x0 -#define IRQ_DMA17 0x4 /* DMA Channel 17 */ -#define nIRQ_DMA17 0x0 -#define IRQ_DMA22 0x8 /* DMA Channel 22 */ -#define nIRQ_DMA22 0x0 -#define IRQ_CNT 0x10 /* Counter */ -#define nIRQ_CNT 0x0 -#define IRQ_KEY 0x20 /* Keypad */ -#define nIRQ_KEY 0x0 -#define IRQ_CAN1_RX 0x40 /* CAN1 Receive */ -#define nIRQ_CAN1_RX 0x0 -#define IRQ_CAN1_TX 0x80 /* CAN1 Transmit */ -#define nIRQ_CAN1_TX 0x0 -#define IRQ_SDH_MASK0 0x100 /* SDH Mask 0 */ -#define nIRQ_SDH_MASK0 0x0 -#define IRQ_SDH_MASK1 0x200 /* SDH Mask 1 */ -#define nIRQ_SDH_MASK1 0x0 -#define IRQ_USB_EINT 0x400 /* USB Exception */ -#define nIRQ_USB_EINT 0x0 -#define IRQ_USB_INT0 0x800 /* USB Interrupt 0 */ -#define nIRQ_USB_INT0 0x0 -#define IRQ_USB_INT1 0x1000 /* USB Interrupt 1 */ -#define nIRQ_USB_INT1 0x0 -#define IRQ_USB_INT2 0x2000 /* USB Interrupt 2 */ -#define nIRQ_USB_INT2 0x0 -#define IRQ_USB_DMAINT 0x4000 /* USB DMA */ -#define nIRQ_USB_DMAINT 0x0 -#define IRQ_OTPSEC 0x8000 /* OTP Access Complete */ -#define nIRQ_OTPSEC 0x0 -#define IRQ_TIMER0 0x400000 /* Timer 0 */ -#define nIRQ_TIMER0 0x0 -#define IRQ_TIMER1 0x800000 /* Timer 1 */ -#define nIRQ_TIMER1 0x0 -#define IRQ_TIMER2 0x1000000 /* Timer 2 */ -#define nIRQ_TIMER2 0x0 -#define IRQ_TIMER3 0x2000000 /* Timer 3 */ -#define nIRQ_TIMER3 0x0 -#define IRQ_TIMER4 0x4000000 /* Timer 4 */ -#define nIRQ_TIMER4 0x0 -#define IRQ_TIMER5 0x8000000 /* Timer 5 */ -#define nIRQ_TIMER5 0x0 -#define IRQ_TIMER6 0x10000000 /* Timer 6 */ -#define nIRQ_TIMER6 0x0 -#define IRQ_TIMER7 0x20000000 /* Timer 7 */ -#define nIRQ_TIMER7 0x0 -#define IRQ_PINT2 0x40000000 /* Pin Interrupt 2 */ -#define nIRQ_PINT2 0x0 -#define IRQ_PINT3 0x80000000 /* Pin Interrupt 3 */ -#define nIRQ_PINT3 0x0 +#define DMA15 0x1 /* DMA Channel 15 */ +#define DMA16 0x2 /* DMA Channel 16 */ +#define DMA17 0x4 /* DMA Channel 17 */ +#define DMA22 0x8 /* DMA Channel 22 */ +#define CNT 0x10 /* Counter */ +#define KEY 0x20 /* Keypad */ +#define CAN1_RX 0x40 /* CAN1 Receive */ +#define CAN1_TX 0x80 /* CAN1 Transmit */ +#define SDH_INT_MASK0 0x100 /* SDH Mask 0 */ +#define SDH_INT_MASK1 0x200 /* SDH Mask 1 */ +#define USB_EINT 0x400 /* USB Exception */ +#define USB_INT0 0x800 /* USB Interrupt 0 */ +#define USB_INT1 0x1000 /* USB Interrupt 1 */ +#define USB_INT2 0x2000 /* USB Interrupt 2 */ +#define USB_DMAINT 0x4000 /* USB DMA */ +#define OTPSEC 0x8000 /* OTP Access Complete */ +#define TIMER0 0x400000 /* Timer 0 */ +#define TIMER1 0x800000 /* Timer 1 */ +#define TIMER2 0x1000000 /* Timer 2 */ +#define TIMER3 0x2000000 /* Timer 3 */ +#define TIMER4 0x4000000 /* Timer 4 */ +#define TIMER5 0x8000000 /* Timer 5 */ +#define TIMER6 0x10000000 /* Timer 6 */ +#define TIMER7 0x20000000 /* Timer 7 */ +#define PINT2 0x40000000 /* Pin Interrupt 2 */ +#define PINT3 0x80000000 /* Pin Interrupt 3 */ /* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */ #define DMAEN 0x1 /* DMA Channel Enable */ -#define nDMAEN 0x0 #define WNR 0x2 /* DMA Direction */ -#define nWNR 0x0 -#define WDSIZE 0xc /* Transfer Word Size */ +#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */ #define DMA2D 0x10 /* DMA Mode */ -#define nDMA2D 0x0 #define RESTART 0x20 /* Work Unit Transitions */ -#define nRESTART 0x0 #define DI_SEL 0x40 /* Data Interrupt Timing Select */ -#define nDI_SEL 0x0 #define DI_EN 0x80 /* Data Interrupt Enable */ -#define nDI_EN 0x0 #define NDSIZE 0xf00 /* Flex Descriptor Size */ #define DMAFLOW 0xf000 /* Next Operation */ /* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ #define DMA_DONE 0x1 /* DMA Completion Interrupt Status */ -#define nDMA_DONE 0x0 #define DMA_ERR 0x2 /* DMA Error Interrupt Status */ -#define nDMA_ERR 0x0 #define DFETCH 0x4 /* DMA Descriptor Fetch */ -#define nDFETCH 0x0 #define DMA_RUN 0x8 /* DMA Channel Running */ -#define nDMA_RUN 0x0 /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ #define CTYPE 0x40 /* DMA Channel Type */ -#define nCTYPE 0x0 #define PMAP 0xf000 /* Peripheral Mapped To This Channel */ /* Bit masks for DMACx_TCPER */ @@ -1756,29 +1669,28 @@ /* Bit masks for DMAC1_PERIMUX */ #define PMUXSDH 0x1 /* Peripheral Select for DMA22 channel */ -#define nPMUXSDH 0x0 -/* Bit masks for EBIU_AMGCTL */ +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ -#define AMCKEN 0x1 /* Async Memory Enable */ -#define nAMCKEN 0x0 -#define AMBEN 0xe /* Async bank enable */ /* Bit masks for EBIU_AMBCTL0 */ #define B0RDYEN 0x1 /* Bank 0 ARDY Enable */ -#define nB0RDYEN 0x0 #define B0RDYPOL 0x2 /* Bank 0 ARDY Polarity */ -#define nB0RDYPOL 0x0 #define B0TT 0xc /* Bank 0 transition time */ #define B0ST 0x30 /* Bank 0 Setup time */ #define B0HT 0xc0 /* Bank 0 Hold time */ #define B0RAT 0xf00 /* Bank 0 Read access time */ #define B0WAT 0xf000 /* Bank 0 write access time */ #define B1RDYEN 0x10000 /* Bank 1 ARDY Enable */ -#define nB1RDYEN 0x0 #define B1RDYPOL 0x20000 /* Bank 1 ARDY Polarity */ -#define nB1RDYPOL 0x0 #define B1TT 0xc0000 /* Bank 1 transition time */ #define B1ST 0x300000 /* Bank 1 Setup time */ #define B1HT 0xc00000 /* Bank 1 Hold time */ @@ -1788,18 +1700,14 @@ /* Bit masks for EBIU_AMBCTL1 */ #define B2RDYEN 0x1 /* Bank 2 ARDY Enable */ -#define nB2RDYEN 0x0 #define B2RDYPOL 0x2 /* Bank 2 ARDY Polarity */ -#define nB2RDYPOL 0x0 #define B2TT 0xc /* Bank 2 transition time */ #define B2ST 0x30 /* Bank 2 Setup time */ #define B2HT 0xc0 /* Bank 2 Hold time */ #define B2RAT 0xf00 /* Bank 2 Read access time */ #define B2WAT 0xf000 /* Bank 2 write access time */ #define B3RDYEN 0x10000 /* Bank 3 ARDY Enable */ -#define nB3RDYEN 0x0 #define B3RDYPOL 0x20000 /* Bank 3 ARDY Polarity */ -#define nB3RDYPOL 0x0 #define B3TT 0xc0000 /* Bank 3 transition time */ #define B3ST 0x300000 /* Bank 3 Setup time */ #define B3HT 0xc00000 /* Bank 3 Hold time */ @@ -1823,19 +1731,15 @@ /* Bit masks for EBIU_FCTL */ #define TESTSETLOCK 0x1 /* Test set lock */ -#define nTESTSETLOCK 0x0 #define BCLK 0x6 /* Burst clock frequency */ #define PGWS 0x38 /* Page wait states */ #define PGSZ 0x40 /* Page size */ -#define nPGSZ 0x0 #define RDDL 0x380 /* Read data delay */ /* Bit masks for EBIU_ARBSTAT */ #define ARBSTAT 0x1 /* Arbitration status */ -#define nARBSTAT 0x0 #define BGSTAT 0x2 /* Bus grant status */ -#define nBGSTAT 0x0 /* Bit masks for EBIU_DDRCTL0 */ @@ -1861,9 +1765,7 @@ #define BURSTLENGTH 0x7 /* Burst length */ #define CASLATENCY 0x70 /* CAS latency */ #define DLLRESET 0x100 /* DLL Reset */ -#define nDLLRESET 0x0 #define REGE 0x1000 /* Register mode enable */ -#define nREGE 0x0 /* Bit masks for EBIU_DDRCTL3 */ @@ -1876,30 +1778,19 @@ #define DEB3_PFLEN 0x30 /* Pre fetch length for DEB3 accesses */ #define DEB_ARB_PRIORITY 0x700 /* Arbitration between DEB busses */ #define DEB1_URGENT 0x1000 /* DEB1 Urgent */ -#define nDEB1_URGENT 0x0 #define DEB2_URGENT 0x2000 /* DEB2 Urgent */ -#define nDEB2_URGENT 0x0 #define DEB3_URGENT 0x4000 /* DEB3 Urgent */ -#define nDEB3_URGENT 0x0 /* Bit masks for EBIU_ERRMST */ #define DEB1_ERROR 0x1 /* DEB1 Error */ -#define nDEB1_ERROR 0x0 #define DEB2_ERROR 0x2 /* DEB2 Error */ -#define nDEB2_ERROR 0x0 #define DEB3_ERROR 0x4 /* DEB3 Error */ -#define nDEB3_ERROR 0x0 #define CORE_ERROR 0x8 /* Core error */ -#define nCORE_ERROR 0x0 #define DEB_MERROR 0x10 /* DEB1 Error (2nd) */ -#define nDEB_MERROR 0x0 #define DEB2_MERROR 0x20 /* DEB2 Error (2nd) */ -#define nDEB2_MERROR 0x0 #define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */ -#define nDEB3_MERROR 0x0 #define CORE_MERROR 0x80 /* Core Error (2nd) */ -#define nCORE_MERROR 0x0 /* Bit masks for EBIU_ERRADD */ @@ -1908,15 +1799,10 @@ /* Bit masks for EBIU_RSTCTL */ #define DDRSRESET 0x1 /* DDR soft reset */ -#define nDDRSRESET 0x0 #define PFTCHSRESET 0x4 /* DDR prefetch reset */ -#define nPFTCHSRESET 0x0 #define SRREQ 0x8 /* Self-refresh request */ -#define nSRREQ 0x0 #define SRACK 0x10 /* Self-refresh acknowledge */ -#define nSRACK 0x0 #define MDDRENABLE 0x20 /* Mobile DDR enable */ -#define nMDDRENABLE 0x0 /* Bit masks for EBIU_DDRBRC0 */ @@ -2013,136 +1899,74 @@ /* Bit masks for EBIU_DDRMCEN */ #define B0WCENABLE 0x1 /* Bank 0 write count enable */ -#define nB0WCENABLE 0x0 #define B1WCENABLE 0x2 /* Bank 1 write count enable */ -#define nB1WCENABLE 0x0 #define B2WCENABLE 0x4 /* Bank 2 write count enable */ -#define nB2WCENABLE 0x0 #define B3WCENABLE 0x8 /* Bank 3 write count enable */ -#define nB3WCENABLE 0x0 #define B4WCENABLE 0x10 /* Bank 4 write count enable */ -#define nB4WCENABLE 0x0 #define B5WCENABLE 0x20 /* Bank 5 write count enable */ -#define nB5WCENABLE 0x0 #define B6WCENABLE 0x40 /* Bank 6 write count enable */ -#define nB6WCENABLE 0x0 #define B7WCENABLE 0x80 /* Bank 7 write count enable */ -#define nB7WCENABLE 0x0 #define B0RCENABLE 0x100 /* Bank 0 read count enable */ -#define nB0RCENABLE 0x0 #define B1RCENABLE 0x200 /* Bank 1 read count enable */ -#define nB1RCENABLE 0x0 #define B2RCENABLE 0x400 /* Bank 2 read count enable */ -#define nB2RCENABLE 0x0 #define B3RCENABLE 0x800 /* Bank 3 read count enable */ -#define nB3RCENABLE 0x0 #define B4RCENABLE 0x1000 /* Bank 4 read count enable */ -#define nB4RCENABLE 0x0 #define B5RCENABLE 0x2000 /* Bank 5 read count enable */ -#define nB5RCENABLE 0x0 #define B6RCENABLE 0x4000 /* Bank 6 read count enable */ -#define nB6RCENABLE 0x0 #define B7RCENABLE 0x8000 /* Bank 7 read count enable */ -#define nB7RCENABLE 0x0 #define ROWACTCENABLE 0x10000 /* DDR Row activate count enable */ -#define nROWACTCENABLE 0x0 #define RWTCENABLE 0x20000 /* DDR R/W Turn around count enable */ -#define nRWTCENABLE 0x0 #define ARCENABLE 0x40000 /* DDR Auto-refresh count enable */ -#define nARCENABLE 0x0 #define GC0ENABLE 0x100000 /* DDR Grant count 0 enable */ -#define nGC0ENABLE 0x0 #define GC1ENABLE 0x200000 /* DDR Grant count 1 enable */ -#define nGC1ENABLE 0x0 #define GC2ENABLE 0x400000 /* DDR Grant count 2 enable */ -#define nGC2ENABLE 0x0 #define GC3ENABLE 0x800000 /* DDR Grant count 3 enable */ -#define nGC3ENABLE 0x0 #define GCCONTROL 0x3000000 /* DDR Grant Count Control */ /* Bit masks for EBIU_DDRMCCL */ #define CB0WCOUNT 0x1 /* Clear write count 0 */ -#define nCB0WCOUNT 0x0 #define CB1WCOUNT 0x2 /* Clear write count 1 */ -#define nCB1WCOUNT 0x0 #define CB2WCOUNT 0x4 /* Clear write count 2 */ -#define nCB2WCOUNT 0x0 #define CB3WCOUNT 0x8 /* Clear write count 3 */ -#define nCB3WCOUNT 0x0 #define CB4WCOUNT 0x10 /* Clear write count 4 */ -#define nCB4WCOUNT 0x0 #define CB5WCOUNT 0x20 /* Clear write count 5 */ -#define nCB5WCOUNT 0x0 #define CB6WCOUNT 0x40 /* Clear write count 6 */ -#define nCB6WCOUNT 0x0 #define CB7WCOUNT 0x80 /* Clear write count 7 */ -#define nCB7WCOUNT 0x0 #define CBRCOUNT 0x100 /* Clear read count 0 */ -#define nCBRCOUNT 0x0 #define CB1RCOUNT 0x200 /* Clear read count 1 */ -#define nCB1RCOUNT 0x0 #define CB2RCOUNT 0x400 /* Clear read count 2 */ -#define nCB2RCOUNT 0x0 #define CB3RCOUNT 0x800 /* Clear read count 3 */ -#define nCB3RCOUNT 0x0 #define CB4RCOUNT 0x1000 /* Clear read count 4 */ -#define nCB4RCOUNT 0x0 #define CB5RCOUNT 0x2000 /* Clear read count 5 */ -#define nCB5RCOUNT 0x0 #define CB6RCOUNT 0x4000 /* Clear read count 6 */ -#define nCB6RCOUNT 0x0 #define CB7RCOUNT 0x8000 /* Clear read count 7 */ -#define nCB7RCOUNT 0x0 #define CRACOUNT 0x10000 /* Clear row activation count */ -#define nCRACOUNT 0x0 #define CRWTACOUNT 0x20000 /* Clear R/W turn-around count */ -#define nCRWTACOUNT 0x0 #define CARCOUNT 0x40000 /* Clear auto-refresh count */ -#define nCARCOUNT 0x0 #define CG0COUNT 0x100000 /* Clear grant count 0 */ -#define nCG0COUNT 0x0 #define CG1COUNT 0x200000 /* Clear grant count 1 */ -#define nCG1COUNT 0x0 #define CG2COUNT 0x400000 /* Clear grant count 2 */ -#define nCG2COUNT 0x0 #define CG3COUNT 0x800000 /* Clear grant count 3 */ -#define nCG3COUNT 0x0 /* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */ #define Px0 0x1 /* GPIO 0 */ -#define nPx0 0x0 #define Px1 0x2 /* GPIO 1 */ -#define nPx1 0x0 #define Px2 0x4 /* GPIO 2 */ -#define nPx2 0x0 #define Px3 0x8 /* GPIO 3 */ -#define nPx3 0x0 #define Px4 0x10 /* GPIO 4 */ -#define nPx4 0x0 #define Px5 0x20 /* GPIO 5 */ -#define nPx5 0x0 #define Px6 0x40 /* GPIO 6 */ -#define nPx6 0x0 #define Px7 0x80 /* GPIO 7 */ -#define nPx7 0x0 #define Px8 0x100 /* GPIO 8 */ -#define nPx8 0x0 #define Px9 0x200 /* GPIO 9 */ -#define nPx9 0x0 #define Px10 0x400 /* GPIO 10 */ -#define nPx10 0x0 #define Px11 0x800 /* GPIO 11 */ -#define nPx11 0x0 #define Px12 0x1000 /* GPIO 12 */ -#define nPx12 0x0 #define Px13 0x2000 /* GPIO 13 */ -#define nPx13 0x0 #define Px14 0x4000 /* GPIO 14 */ -#define nPx14 0x0 #define Px15 0x8000 /* GPIO 15 */ -#define nPx15 0x0 /* Bit masks for PORTA_MUX - PORTJ_MUX */ @@ -2167,223 +1991,129 @@ /* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */ #define IB0 0x1 /* Interrupt Bit 0 */ -#define nIB0 0x0 #define IB1 0x2 /* Interrupt Bit 1 */ -#define nIB1 0x0 #define IB2 0x4 /* Interrupt Bit 2 */ -#define nIB2 0x0 #define IB3 0x8 /* Interrupt Bit 3 */ -#define nIB3 0x0 #define IB4 0x10 /* Interrupt Bit 4 */ -#define nIB4 0x0 #define IB5 0x20 /* Interrupt Bit 5 */ -#define nIB5 0x0 #define IB6 0x40 /* Interrupt Bit 6 */ -#define nIB6 0x0 #define IB7 0x80 /* Interrupt Bit 7 */ -#define nIB7 0x0 #define IB8 0x100 /* Interrupt Bit 8 */ -#define nIB8 0x0 #define IB9 0x200 /* Interrupt Bit 9 */ -#define nIB9 0x0 #define IB10 0x400 /* Interrupt Bit 10 */ -#define nIB10 0x0 #define IB11 0x800 /* Interrupt Bit 11 */ -#define nIB11 0x0 #define IB12 0x1000 /* Interrupt Bit 12 */ -#define nIB12 0x0 #define IB13 0x2000 /* Interrupt Bit 13 */ -#define nIB13 0x0 #define IB14 0x4000 /* Interrupt Bit 14 */ -#define nIB14 0x0 #define IB15 0x8000 /* Interrupt Bit 15 */ -#define nIB15 0x0 /* Bit masks for TIMERx_CONFIG */ #define TMODE 0x3 /* Timer Mode */ #define PULSE_HI 0x4 /* Pulse Polarity */ -#define nPULSE_HI 0x0 #define PERIOD_CNT 0x8 /* Period Count */ -#define nPERIOD_CNT 0x0 #define IRQ_ENA 0x10 /* Interrupt Request Enable */ -#define nIRQ_ENA 0x0 #define TIN_SEL 0x20 /* Timer Input Select */ -#define nTIN_SEL 0x0 #define OUT_DIS 0x40 /* Output Pad Disable */ -#define nOUT_DIS 0x0 #define CLK_SEL 0x80 /* Timer Clock Select */ -#define nCLK_SEL 0x0 #define TOGGLE_HI 0x100 /* Toggle Mode */ -#define nTOGGLE_HI 0x0 #define EMU_RUN 0x200 /* Emulation Behavior Select */ -#define nEMU_RUN 0x0 #define ERR_TYP 0xc000 /* Error Type */ /* Bit masks for TIMER_ENABLE0 */ #define TIMEN0 0x1 /* Timer 0 Enable */ -#define nTIMEN0 0x0 #define TIMEN1 0x2 /* Timer 1 Enable */ -#define nTIMEN1 0x0 #define TIMEN2 0x4 /* Timer 2 Enable */ -#define nTIMEN2 0x0 #define TIMEN3 0x8 /* Timer 3 Enable */ -#define nTIMEN3 0x0 #define TIMEN4 0x10 /* Timer 4 Enable */ -#define nTIMEN4 0x0 #define TIMEN5 0x20 /* Timer 5 Enable */ -#define nTIMEN5 0x0 #define TIMEN6 0x40 /* Timer 6 Enable */ -#define nTIMEN6 0x0 #define TIMEN7 0x80 /* Timer 7 Enable */ -#define nTIMEN7 0x0 /* Bit masks for TIMER_DISABLE0 */ #define TIMDIS0 0x1 /* Timer 0 Disable */ -#define nTIMDIS0 0x0 #define TIMDIS1 0x2 /* Timer 1 Disable */ -#define nTIMDIS1 0x0 #define TIMDIS2 0x4 /* Timer 2 Disable */ -#define nTIMDIS2 0x0 #define TIMDIS3 0x8 /* Timer 3 Disable */ -#define nTIMDIS3 0x0 #define TIMDIS4 0x10 /* Timer 4 Disable */ -#define nTIMDIS4 0x0 #define TIMDIS5 0x20 /* Timer 5 Disable */ -#define nTIMDIS5 0x0 #define TIMDIS6 0x40 /* Timer 6 Disable */ -#define nTIMDIS6 0x0 #define TIMDIS7 0x80 /* Timer 7 Disable */ -#define nTIMDIS7 0x0 /* Bit masks for TIMER_STATUS0 */ #define TIMIL0 0x1 /* Timer 0 Interrupt */ -#define nTIMIL0 0x0 #define TIMIL1 0x2 /* Timer 1 Interrupt */ -#define nTIMIL1 0x0 #define TIMIL2 0x4 /* Timer 2 Interrupt */ -#define nTIMIL2 0x0 #define TIMIL3 0x8 /* Timer 3 Interrupt */ -#define nTIMIL3 0x0 #define TOVF_ERR0 0x10 /* Timer 0 Counter Overflow */ -#define nTOVF_ERR0 0x0 #define TOVF_ERR1 0x20 /* Timer 1 Counter Overflow */ -#define nTOVF_ERR1 0x0 #define TOVF_ERR2 0x40 /* Timer 2 Counter Overflow */ -#define nTOVF_ERR2 0x0 #define TOVF_ERR3 0x80 /* Timer 3 Counter Overflow */ -#define nTOVF_ERR3 0x0 #define TRUN0 0x1000 /* Timer 0 Slave Enable Status */ -#define nTRUN0 0x0 #define TRUN1 0x2000 /* Timer 1 Slave Enable Status */ -#define nTRUN1 0x0 #define TRUN2 0x4000 /* Timer 2 Slave Enable Status */ -#define nTRUN2 0x0 #define TRUN3 0x8000 /* Timer 3 Slave Enable Status */ -#define nTRUN3 0x0 #define TIMIL4 0x10000 /* Timer 4 Interrupt */ -#define nTIMIL4 0x0 #define TIMIL5 0x20000 /* Timer 5 Interrupt */ -#define nTIMIL5 0x0 #define TIMIL6 0x40000 /* Timer 6 Interrupt */ -#define nTIMIL6 0x0 #define TIMIL7 0x80000 /* Timer 7 Interrupt */ -#define nTIMIL7 0x0 #define TOVF_ERR4 0x100000 /* Timer 4 Counter Overflow */ -#define nTOVF_ERR4 0x0 #define TOVF_ERR5 0x200000 /* Timer 5 Counter Overflow */ -#define nTOVF_ERR5 0x0 #define TOVF_ERR6 0x400000 /* Timer 6 Counter Overflow */ -#define nTOVF_ERR6 0x0 #define TOVF_ERR7 0x800000 /* Timer 7 Counter Overflow */ -#define nTOVF_ERR7 0x0 #define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ -#define nTRUN4 0x0 #define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ -#define nTRUN5 0x0 #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ -#define nTRUN6 0x0 #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ -#define nTRUN7 0x0 /* Bit masks for WDOG_CTL */ #define WDEV 0x6 /* Watchdog Event */ #define WDEN 0xff0 /* Watchdog Enable */ #define WDRO 0x8000 /* Watchdog Rolled Over */ -#define nWDRO 0x0 /* Bit masks for CNT_CONFIG */ #define CNTE 0x1 /* Counter Enable */ -#define nCNTE 0x0 #define DEBE 0x2 /* Debounce Enable */ -#define nDEBE 0x0 #define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define nCDGINV 0x0 #define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define nCUDINV 0x0 #define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define nCZMINV 0x0 #define CNTMODE 0x700 /* Counter Operating Mode */ #define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define nZMZC 0x0 #define BNDMODE 0x3000 /* Boundary register Mode */ #define INPDIS 0x8000 /* CUG and CDG Input Disable */ -#define nINPDIS 0x0 /* Bit masks for CNT_IMASK */ #define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define nICIE 0x0 #define UCIE 0x2 /* Up count Interrupt Enable */ -#define nUCIE 0x0 #define DCIE 0x4 /* Down count Interrupt Enable */ -#define nDCIE 0x0 #define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define nMINCIE 0x0 #define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define nMAXCIE 0x0 #define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define nCOV31IE 0x0 #define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define nCOV15IE 0x0 #define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define nCZEROIE 0x0 #define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define nCZMIE 0x0 #define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define nCZMEIE 0x0 #define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ -#define nCZMZIE 0x0 /* Bit masks for CNT_STATUS */ #define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define nICII 0x0 #define UCII 0x2 /* Up count Interrupt Identifier */ -#define nUCII 0x0 #define DCII 0x4 /* Down count Interrupt Identifier */ -#define nDCII 0x0 #define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define nMINCII 0x0 #define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define nMAXCII 0x0 #define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define nCOV31II 0x0 #define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define nCOV15II 0x0 #define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define nCZEROII 0x0 #define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define nCZMII 0x0 #define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define nCZMEII 0x0 #define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ -#define nCZMZII 0x0 /* Bit masks for CNT_COMMAND */ @@ -2391,7 +2121,6 @@ #define W1LMIN 0xf0 /* Load Min Register */ #define W1LMAX 0xf00 /* Load Max Register */ #define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ -#define nW1ZMONCE 0x0 /* Bit masks for CNT_DEBOUNCE */ @@ -2407,42 +2136,25 @@ /* Bit masks for RTC_ICTL */ #define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */ -#define nSTOPWATCH_INTERRUPT_ENABLE 0x0 #define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */ -#define nALARM_INTERRUPT_ENABLE 0x0 #define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */ -#define nSECONDS_INTERRUPT_ENABLE 0x0 #define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */ -#define nMINUTES_INTERRUPT_ENABLE 0x0 #define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */ -#define nHOURS_INTERRUPT_ENABLE 0x0 #define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */ -#define nTWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x0 #define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */ -#define nDAY_ALARM_INTERRUPT_ENABLE 0x0 #define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */ -#define nWRITE_COMPLETE_INTERRUPT_ENABLE 0x0 /* Bit masks for RTC_ISTAT */ #define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */ -#define nSTOPWATCH_EVENT_FLAG 0x0 #define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */ -#define nALARM_EVENT_FLAG 0x0 #define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */ -#define nSECONDS_EVENT_FLAG 0x0 #define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */ -#define nMINUTES_EVENT_FLAG 0x0 #define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */ -#define nHOURS_EVENT_FLAG 0x0 #define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */ -#define nTWENTY_FOUR_HOURS_EVENT_FLAG 0x0 #define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */ -#define nDAY_ALARM_EVENT_FLAG 0x0 #define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */ -#define nWRITE_PENDING__STATUS 0x0 #define WRITE_COMPLETE 0x8000 /* Write Complete */ -#define nWRITE_COMPLETE 0x0 /* Bit masks for RTC_SWCNT */ @@ -2458,21 +2170,15 @@ /* Bit masks for RTC_PREN */ #define PREN 0x1 /* Prescaler Enable */ -#define nPREN 0x0 /* Bit masks for OTP_CONTROL */ #define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ #define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 #define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 #define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 #define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 #define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 /* Bit masks for OTP_BEN */ @@ -2481,15 +2187,10 @@ /* Bit masks for OTP_STATUS */ #define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 #define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 #define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 #define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 #define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 /* Bit masks for OTP_TIMING */ @@ -2503,42 +2204,29 @@ /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ -#define nEMUDABL 0x0 #define RSTDABL 0x2 /* Reset Disable */ -#define nRSTDABL 0x0 #define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ #define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ #define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ #define DMA0OVR 0x800 /* DMA0 Memory Access Override */ -#define nDMA0OVR 0x0 #define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ -#define nDMA1OVR 0x0 #define EMUOVR 0x4000 /* Emulation Override */ -#define nEMUOVR 0x0 #define OTPSEN 0x8000 /* OTP Secrets Enable. */ -#define nOTPSEN 0x0 #define L2DABL 0x70000 /* L2 Memory Disable. */ /* Bit masks for SECURE_CONTROL */ #define SECURE0 0x1 /* SECURE 0 */ -#define nSECURE0 0x0 #define SECURE1 0x2 /* SECURE 1 */ -#define nSECURE1 0x0 #define SECURE2 0x4 /* SECURE 2 */ -#define nSECURE2 0x0 #define SECURE3 0x8 /* SECURE 3 */ -#define nSECURE3 0x0 /* Bit masks for SECURE_STATUS */ #define SECMODE 0x3 /* Secured Mode Control State */ #define NMI 0x4 /* Non Maskable Interrupt */ -#define nNMI 0x0 #define AFVALID 0x8 /* Authentication Firmware Valid */ -#define nAFVALID 0x0 #define AFEXIT 0x10 /* Authentication Firmware Exit */ -#define nAFEXIT 0x0 #define SECSTAT 0xe0 /* Secure Status */ /* Bit masks for PLL_DIV */ @@ -2550,42 +2238,25 @@ #define MSEL 0x7e00 /* Multiplier Select */ #define BYPASS 0x100 /* PLL Bypass Enable */ -#define nBYPASS 0x0 #define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */ -#define nOUTPUT_DELAY 0x0 #define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */ -#define nINPUT_DELAY 0x0 #define PDWN 0x20 /* Power Down */ -#define nPDWN 0x0 #define STOPCK 0x8 /* Stop Clock */ -#define nSTOPCK 0x0 #define PLL_OFF 0x2 /* Disable PLL */ -#define nPLL_OFF 0x0 #define DF 0x1 /* Divide Frequency */ -#define nDF 0x0 /* Bit masks for PLL_STAT */ #define PLL_LOCKED 0x20 /* PLL Locked Status */ -#define nPLL_LOCKED 0x0 #define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */ -#define nACTIVE_PLLDISABLED 0x0 #define FULL_ON 0x2 /* Full-On Mode */ -#define nFULL_ON 0x0 #define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */ -#define nACTIVE_PLLENABLED 0x0 #define RTCWS 0x400 /* RTC/Reset Wake-Up Status */ -#define nRTCWS 0x0 #define CANWS 0x800 /* CAN Wake-Up Status */ -#define nCANWS 0x0 #define USBWS 0x2000 /* USB Wake-Up Status */ -#define nUSBWS 0x0 #define KPADWS 0x4000 /* Keypad Wake-Up Status */ -#define nKPADWS 0x0 #define ROTWS 0x8000 /* Rotary Wake-Up Status */ -#define nROTWS 0x0 #define GPWS 0x1000 /* General-Purpose Wake-Up Status */ -#define nGPWS 0x0 /* Bit masks for VR_CTL */ @@ -2593,79 +2264,52 @@ #define GAIN 0xc /* Voltage Output Level Gain */ #define VLEV 0xf0 /* Internal Voltage Level */ #define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */ -#define nSCKELOW 0x0 #define WAKE 0x100 /* RTC/Reset Wake-Up Enable */ -#define nWAKE 0x0 #define CANWE 0x200 /* CAN0/1 Wake-Up Enable */ -#define nCANWE 0x0 #define GPWE 0x400 /* General-Purpose Wake-Up Enable */ -#define nGPWE 0x0 #define USBWE 0x800 /* USB Wake-Up Enable */ -#define nUSBWE 0x0 #define KPADWE 0x1000 /* Keypad Wake-Up Enable */ -#define nKPADWE 0x0 #define ROTWE 0x2000 /* Rotary Wake-Up Enable */ -#define nROTWE 0x0 /* Bit masks for NFC_CTL */ #define WR_DLY 0xf /* Write Strobe Delay */ #define RD_DLY 0xf0 /* Read Strobe Delay */ #define NWIDTH 0x100 /* NAND Data Width */ -#define nNWIDTH 0x0 #define PG_SIZE 0x200 /* Page Size */ -#define nPG_SIZE 0x0 /* Bit masks for NFC_STAT */ #define NBUSY 0x1 /* Not Busy */ -#define nNBUSY 0x0 #define WB_FULL 0x2 /* Write Buffer Full */ -#define nWB_FULL 0x0 #define PG_WR_STAT 0x4 /* Page Write Pending */ -#define nPG_WR_STAT 0x0 #define PG_RD_STAT 0x8 /* Page Read Pending */ -#define nPG_RD_STAT 0x0 #define WB_EMPTY 0x10 /* Write Buffer Empty */ -#define nWB_EMPTY 0x0 /* Bit masks for NFC_IRQSTAT */ #define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define nNBUSYIRQ 0x0 #define WB_OVF 0x2 /* Write Buffer Overflow */ -#define nWB_OVF 0x0 #define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define nWB_EDGE 0x0 #define RD_RDY 0x8 /* Read Data Ready */ -#define nRD_RDY 0x0 #define WR_DONE 0x10 /* Page Write Done */ -#define nWR_DONE 0x0 /* Bit masks for NFC_IRQMASK */ #define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ -#define nMASK_BUSYIRQ 0x0 #define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ -#define nMASK_WBOVF 0x0 #define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ -#define nMASK_WBEMPTY 0x0 #define MASK_RDRDY 0x8 /* Mask Read Data Ready */ -#define nMASK_RDRDY 0x0 #define MASK_WRDONE 0x10 /* Mask Write Done */ -#define nMASK_WRDONE 0x0 /* Bit masks for NFC_RST */ #define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ -#define nECC_RST 0x0 /* Bit masks for NFC_PGCTL */ #define PG_RD_START 0x1 /* Page Read Start */ -#define nPG_RD_START 0x0 #define PG_WR_START 0x2 /* Page Write Start */ -#define nPG_WR_START 0x0 /* Bit masks for NFC_ECC0 */ @@ -2690,56 +2334,34 @@ /* Bit masks for CAN0_CONTROL */ #define SRS 0x1 /* Software Reset */ -#define nSRS 0x0 #define DNM 0x2 /* DeviceNet Mode */ -#define nDNM 0x0 #define ABO 0x4 /* Auto Bus On */ -#define nABO 0x0 #define WBA 0x10 /* Wakeup On CAN Bus Activity */ -#define nWBA 0x0 #define SMR 0x20 /* Sleep Mode Request */ -#define nSMR 0x0 #define CSR 0x40 /* CAN Suspend Mode Request */ -#define nCSR 0x0 #define CCR 0x80 /* CAN Configuration Mode Request */ -#define nCCR 0x0 /* Bit masks for CAN0_STATUS */ #define WT 0x1 /* CAN Transmit Warning Flag */ -#define nWT 0x0 #define WR 0x2 /* CAN Receive Warning Flag */ -#define nWR 0x0 #define EP 0x4 /* CAN Error Passive Mode */ -#define nEP 0x0 #define EBO 0x8 /* CAN Error Bus Off Mode */ -#define nEBO 0x0 #define CSA 0x40 /* CAN Suspend Mode Acknowledge */ -#define nCSA 0x0 #define CCA 0x80 /* CAN Configuration Mode Acknowledge */ -#define nCCA 0x0 #define MBPTR 0x1f00 /* Mailbox Pointer */ #define TRM 0x4000 /* Transmit Mode Status */ -#define nTRM 0x0 #define REC 0x8000 /* Receive Mode Status */ -#define nREC 0x0 /* Bit masks for CAN0_DEBUG */ #define DEC 0x1 /* Disable Transmit/Receive Error Counters */ -#define nDEC 0x0 #define DRI 0x2 /* Disable CANRX Input Pin */ -#define nDRI 0x0 #define DTO 0x4 /* Disable CANTX Output Pin */ -#define nDTO 0x0 #define DIL 0x8 /* Disable Internal Loop */ -#define nDIL 0x0 #define MAA 0x10 /* Mode Auto-Acknowledge */ -#define nMAA 0x0 #define MRB 0x20 /* Mode Read Back */ -#define nMRB 0x0 #define CDE 0x8000 /* CAN Debug Mode Enable */ -#define nCDE 0x0 /* Bit masks for CAN0_CLOCK */ @@ -2749,111 +2371,69 @@ #define SJW 0x300 /* Synchronization Jump Width */ #define SAM 0x80 /* Sampling */ -#define nSAM 0x0 #define TSEG2 0x70 /* Time Segment 2 */ #define TSEG1 0xf /* Time Segment 1 */ /* Bit masks for CAN0_INTR */ #define CANRX 0x80 /* Serial Input From Transceiver */ -#define nCANRX 0x0 #define CANTX 0x40 /* Serial Output To Transceiver */ -#define nCANTX 0x0 #define SMACK 0x8 /* Sleep Mode Acknowledge */ -#define nSMACK 0x0 #define GIRQ 0x4 /* Global Interrupt Request Status */ -#define nGIRQ 0x0 #define MBTIRQ 0x2 /* Mailbox Transmit Interrupt Request */ -#define nMBTIRQ 0x0 #define MBRIRQ 0x1 /* Mailbox Receive Interrupt Request */ -#define nMBRIRQ 0x0 /* Bit masks for CAN0_GIM */ #define EWTIM 0x1 /* Error Warning Transmit Interrupt Mask */ -#define nEWTIM 0x0 #define EWRIM 0x2 /* Error Warning Receive Interrupt Mask */ -#define nEWRIM 0x0 #define EPIM 0x4 /* Error Passive Interrupt Mask */ -#define nEPIM 0x0 #define BOIM 0x8 /* Bus Off Interrupt Mask */ -#define nBOIM 0x0 #define WUIM 0x10 /* Wakeup Interrupt Mask */ -#define nWUIM 0x0 #define UIAIM 0x20 /* Unimplemented Address Interrupt Mask */ -#define nUIAIM 0x0 #define AAIM 0x40 /* Abort Acknowledge Interrupt Mask */ -#define nAAIM 0x0 #define RMLIM 0x80 /* Receive Message Lost Interrupt Mask */ -#define nRMLIM 0x0 #define UCEIM 0x100 /* Universal Counter Exceeded Interrupt Mask */ -#define nUCEIM 0x0 #define ADIM 0x400 /* Access Denied Interrupt Mask */ -#define nADIM 0x0 /* Bit masks for CAN0_GIS */ #define EWTIS 0x1 /* Error Warning Transmit Interrupt Status */ -#define nEWTIS 0x0 #define EWRIS 0x2 /* Error Warning Receive Interrupt Status */ -#define nEWRIS 0x0 #define EPIS 0x4 /* Error Passive Interrupt Status */ -#define nEPIS 0x0 #define BOIS 0x8 /* Bus Off Interrupt Status */ -#define nBOIS 0x0 #define WUIS 0x10 /* Wakeup Interrupt Status */ -#define nWUIS 0x0 #define UIAIS 0x20 /* Unimplemented Address Interrupt Status */ -#define nUIAIS 0x0 #define AAIS 0x40 /* Abort Acknowledge Interrupt Status */ -#define nAAIS 0x0 #define RMLIS 0x80 /* Receive Message Lost Interrupt Status */ -#define nRMLIS 0x0 #define UCEIS 0x100 /* Universal Counter Exceeded Interrupt Status */ -#define nUCEIS 0x0 #define ADIS 0x400 /* Access Denied Interrupt Status */ -#define nADIS 0x0 /* Bit masks for CAN0_GIF */ #define EWTIF 0x1 /* Error Warning Transmit Interrupt Flag */ -#define nEWTIF 0x0 #define EWRIF 0x2 /* Error Warning Receive Interrupt Flag */ -#define nEWRIF 0x0 #define EPIF 0x4 /* Error Passive Interrupt Flag */ -#define nEPIF 0x0 #define BOIF 0x8 /* Bus Off Interrupt Flag */ -#define nBOIF 0x0 #define WUIF 0x10 /* Wakeup Interrupt Flag */ -#define nWUIF 0x0 #define UIAIF 0x20 /* Unimplemented Address Interrupt Flag */ -#define nUIAIF 0x0 #define AAIF 0x40 /* Abort Acknowledge Interrupt Flag */ -#define nAAIF 0x0 #define RMLIF 0x80 /* Receive Message Lost Interrupt Flag */ -#define nRMLIF 0x0 #define UCEIF 0x100 /* Universal Counter Exceeded Interrupt Flag */ -#define nUCEIF 0x0 #define ADIF 0x400 /* Access Denied Interrupt Flag */ -#define nADIF 0x0 /* Bit masks for CAN0_MBTD */ #define TDR 0x80 /* Temporary Disable Request */ -#define nTDR 0x0 #define TDA 0x40 /* Temporary Disable Acknowledge */ -#define nTDA 0x0 #define TDPTR 0x1f /* Temporary Disable Pointer */ /* Bit masks for CAN0_UCCNF */ #define UCCNF 0xf /* Universal Counter Configuration */ #define UCRC 0x20 /* Universal Counter Reload/Clear */ -#define nUCRC 0x0 #define UCCT 0x40 /* Universal Counter CAN Trigger */ -#define nUCCT 0x0 #define UCE 0x80 /* Universal Counter Enable */ -#define nUCE 0x0 /* Bit masks for CAN0_UCCNT */ @@ -2871,17 +2451,11 @@ /* Bit masks for CAN0_ESR */ #define FER 0x80 /* Form Error */ -#define nFER 0x0 #define BEF 0x40 /* Bit Error Flag */ -#define nBEF 0x0 #define SA0 0x20 /* Stuck At Dominant */ -#define nSA0 0x0 #define CRCE 0x10 /* CRC Error */ -#define nCRCE 0x0 #define SER 0x8 /* Stuff Bit Error */ -#define nSER 0x0 #define ACKE 0x4 /* Acknowledge Error */ -#define nACKE 0x0 /* Bit masks for CAN0_EWR */ @@ -2891,11 +2465,8 @@ /* Bit masks for CAN0_AMxx_H */ #define FDF 0x8000 /* Filter On Data Field */ -#define nFDF 0x0 #define FMD 0x4000 /* Full Mask Data */ -#define nFMD 0x0 #define AMIDE 0x2000 /* Acceptance Mask Identifier Extension */ -#define nAMIDE 0x0 #define BASEID 0x1ffc /* Base Identifier */ #define EXTID_HI 0x3 /* Extended Identifier High Bits */ @@ -2907,11 +2478,8 @@ /* Bit masks for CAN0_MBxx_ID1 */ #define AME 0x8000 /* Acceptance Mask Enable */ -#define nAME 0x0 #define RTR 0x4000 /* Remote Transmission Request */ -#define nRTR 0x0 #define IDE 0x2000 /* Identifier Extension */ -#define nIDE 0x0 #define BASEID 0x1ffc /* Base Identifier */ #define EXTID_HI 0x3 /* Extended Identifier High Bits */ @@ -2951,977 +2519,534 @@ /* Bit masks for CAN0_MC1 */ #define MC0 0x1 /* Mailbox 0 Enable */ -#define nMC0 0x0 #define MC1 0x2 /* Mailbox 1 Enable */ -#define nMC1 0x0 #define MC2 0x4 /* Mailbox 2 Enable */ -#define nMC2 0x0 #define MC3 0x8 /* Mailbox 3 Enable */ -#define nMC3 0x0 #define MC4 0x10 /* Mailbox 4 Enable */ -#define nMC4 0x0 #define MC5 0x20 /* Mailbox 5 Enable */ -#define nMC5 0x0 #define MC6 0x40 /* Mailbox 6 Enable */ -#define nMC6 0x0 #define MC7 0x80 /* Mailbox 7 Enable */ -#define nMC7 0x0 #define MC8 0x100 /* Mailbox 8 Enable */ -#define nMC8 0x0 #define MC9 0x200 /* Mailbox 9 Enable */ -#define nMC9 0x0 #define MC10 0x400 /* Mailbox 10 Enable */ -#define nMC10 0x0 #define MC11 0x800 /* Mailbox 11 Enable */ -#define nMC11 0x0 #define MC12 0x1000 /* Mailbox 12 Enable */ -#define nMC12 0x0 #define MC13 0x2000 /* Mailbox 13 Enable */ -#define nMC13 0x0 #define MC14 0x4000 /* Mailbox 14 Enable */ -#define nMC14 0x0 #define MC15 0x8000 /* Mailbox 15 Enable */ -#define nMC15 0x0 /* Bit masks for CAN0_MC2 */ #define MC16 0x1 /* Mailbox 16 Enable */ -#define nMC16 0x0 #define MC17 0x2 /* Mailbox 17 Enable */ -#define nMC17 0x0 #define MC18 0x4 /* Mailbox 18 Enable */ -#define nMC18 0x0 #define MC19 0x8 /* Mailbox 19 Enable */ -#define nMC19 0x0 #define MC20 0x10 /* Mailbox 20 Enable */ -#define nMC20 0x0 #define MC21 0x20 /* Mailbox 21 Enable */ -#define nMC21 0x0 #define MC22 0x40 /* Mailbox 22 Enable */ -#define nMC22 0x0 #define MC23 0x80 /* Mailbox 23 Enable */ -#define nMC23 0x0 #define MC24 0x100 /* Mailbox 24 Enable */ -#define nMC24 0x0 #define MC25 0x200 /* Mailbox 25 Enable */ -#define nMC25 0x0 #define MC26 0x400 /* Mailbox 26 Enable */ -#define nMC26 0x0 #define MC27 0x800 /* Mailbox 27 Enable */ -#define nMC27 0x0 #define MC28 0x1000 /* Mailbox 28 Enable */ -#define nMC28 0x0 #define MC29 0x2000 /* Mailbox 29 Enable */ -#define nMC29 0x0 #define MC30 0x4000 /* Mailbox 30 Enable */ -#define nMC30 0x0 #define MC31 0x8000 /* Mailbox 31 Enable */ -#define nMC31 0x0 /* Bit masks for CAN0_MD1 */ #define MD0 0x1 /* Mailbox 0 Receive Enable */ -#define nMD0 0x0 #define MD1 0x2 /* Mailbox 1 Receive Enable */ -#define nMD1 0x0 #define MD2 0x4 /* Mailbox 2 Receive Enable */ -#define nMD2 0x0 #define MD3 0x8 /* Mailbox 3 Receive Enable */ -#define nMD3 0x0 #define MD4 0x10 /* Mailbox 4 Receive Enable */ -#define nMD4 0x0 #define MD5 0x20 /* Mailbox 5 Receive Enable */ -#define nMD5 0x0 #define MD6 0x40 /* Mailbox 6 Receive Enable */ -#define nMD6 0x0 #define MD7 0x80 /* Mailbox 7 Receive Enable */ -#define nMD7 0x0 #define MD8 0x100 /* Mailbox 8 Receive Enable */ -#define nMD8 0x0 #define MD9 0x200 /* Mailbox 9 Receive Enable */ -#define nMD9 0x0 #define MD10 0x400 /* Mailbox 10 Receive Enable */ -#define nMD10 0x0 #define MD11 0x800 /* Mailbox 11 Receive Enable */ -#define nMD11 0x0 #define MD12 0x1000 /* Mailbox 12 Receive Enable */ -#define nMD12 0x0 #define MD13 0x2000 /* Mailbox 13 Receive Enable */ -#define nMD13 0x0 #define MD14 0x4000 /* Mailbox 14 Receive Enable */ -#define nMD14 0x0 #define MD15 0x8000 /* Mailbox 15 Receive Enable */ -#define nMD15 0x0 /* Bit masks for CAN0_MD2 */ #define MD16 0x1 /* Mailbox 16 Receive Enable */ -#define nMD16 0x0 #define MD17 0x2 /* Mailbox 17 Receive Enable */ -#define nMD17 0x0 #define MD18 0x4 /* Mailbox 18 Receive Enable */ -#define nMD18 0x0 #define MD19 0x8 /* Mailbox 19 Receive Enable */ -#define nMD19 0x0 #define MD20 0x10 /* Mailbox 20 Receive Enable */ -#define nMD20 0x0 #define MD21 0x20 /* Mailbox 21 Receive Enable */ -#define nMD21 0x0 #define MD22 0x40 /* Mailbox 22 Receive Enable */ -#define nMD22 0x0 #define MD23 0x80 /* Mailbox 23 Receive Enable */ -#define nMD23 0x0 #define MD24 0x100 /* Mailbox 24 Receive Enable */ -#define nMD24 0x0 #define MD25 0x200 /* Mailbox 25 Receive Enable */ -#define nMD25 0x0 #define MD26 0x400 /* Mailbox 26 Receive Enable */ -#define nMD26 0x0 #define MD27 0x800 /* Mailbox 27 Receive Enable */ -#define nMD27 0x0 #define MD28 0x1000 /* Mailbox 28 Receive Enable */ -#define nMD28 0x0 #define MD29 0x2000 /* Mailbox 29 Receive Enable */ -#define nMD29 0x0 #define MD30 0x4000 /* Mailbox 30 Receive Enable */ -#define nMD30 0x0 #define MD31 0x8000 /* Mailbox 31 Receive Enable */ -#define nMD31 0x0 /* Bit masks for CAN0_RMP1 */ #define RMP0 0x1 /* Mailbox 0 Receive Message Pending */ -#define nRMP0 0x0 #define RMP1 0x2 /* Mailbox 1 Receive Message Pending */ -#define nRMP1 0x0 #define RMP2 0x4 /* Mailbox 2 Receive Message Pending */ -#define nRMP2 0x0 #define RMP3 0x8 /* Mailbox 3 Receive Message Pending */ -#define nRMP3 0x0 #define RMP4 0x10 /* Mailbox 4 Receive Message Pending */ -#define nRMP4 0x0 #define RMP5 0x20 /* Mailbox 5 Receive Message Pending */ -#define nRMP5 0x0 #define RMP6 0x40 /* Mailbox 6 Receive Message Pending */ -#define nRMP6 0x0 #define RMP7 0x80 /* Mailbox 7 Receive Message Pending */ -#define nRMP7 0x0 #define RMP8 0x100 /* Mailbox 8 Receive Message Pending */ -#define nRMP8 0x0 #define RMP9 0x200 /* Mailbox 9 Receive Message Pending */ -#define nRMP9 0x0 #define RMP10 0x400 /* Mailbox 10 Receive Message Pending */ -#define nRMP10 0x0 #define RMP11 0x800 /* Mailbox 11 Receive Message Pending */ -#define nRMP11 0x0 #define RMP12 0x1000 /* Mailbox 12 Receive Message Pending */ -#define nRMP12 0x0 #define RMP13 0x2000 /* Mailbox 13 Receive Message Pending */ -#define nRMP13 0x0 #define RMP14 0x4000 /* Mailbox 14 Receive Message Pending */ -#define nRMP14 0x0 #define RMP15 0x8000 /* Mailbox 15 Receive Message Pending */ -#define nRMP15 0x0 /* Bit masks for CAN0_RMP2 */ #define RMP16 0x1 /* Mailbox 16 Receive Message Pending */ -#define nRMP16 0x0 #define RMP17 0x2 /* Mailbox 17 Receive Message Pending */ -#define nRMP17 0x0 #define RMP18 0x4 /* Mailbox 18 Receive Message Pending */ -#define nRMP18 0x0 #define RMP19 0x8 /* Mailbox 19 Receive Message Pending */ -#define nRMP19 0x0 #define RMP20 0x10 /* Mailbox 20 Receive Message Pending */ -#define nRMP20 0x0 #define RMP21 0x20 /* Mailbox 21 Receive Message Pending */ -#define nRMP21 0x0 #define RMP22 0x40 /* Mailbox 22 Receive Message Pending */ -#define nRMP22 0x0 #define RMP23 0x80 /* Mailbox 23 Receive Message Pending */ -#define nRMP23 0x0 #define RMP24 0x100 /* Mailbox 24 Receive Message Pending */ -#define nRMP24 0x0 #define RMP25 0x200 /* Mailbox 25 Receive Message Pending */ -#define nRMP25 0x0 #define RMP26 0x400 /* Mailbox 26 Receive Message Pending */ -#define nRMP26 0x0 #define RMP27 0x800 /* Mailbox 27 Receive Message Pending */ -#define nRMP27 0x0 #define RMP28 0x1000 /* Mailbox 28 Receive Message Pending */ -#define nRMP28 0x0 #define RMP29 0x2000 /* Mailbox 29 Receive Message Pending */ -#define nRMP29 0x0 #define RMP30 0x4000 /* Mailbox 30 Receive Message Pending */ -#define nRMP30 0x0 #define RMP31 0x8000 /* Mailbox 31 Receive Message Pending */ -#define nRMP31 0x0 /* Bit masks for CAN0_RML1 */ #define RML0 0x1 /* Mailbox 0 Receive Message Lost */ -#define nRML0 0x0 #define RML1 0x2 /* Mailbox 1 Receive Message Lost */ -#define nRML1 0x0 #define RML2 0x4 /* Mailbox 2 Receive Message Lost */ -#define nRML2 0x0 #define RML3 0x8 /* Mailbox 3 Receive Message Lost */ -#define nRML3 0x0 #define RML4 0x10 /* Mailbox 4 Receive Message Lost */ -#define nRML4 0x0 #define RML5 0x20 /* Mailbox 5 Receive Message Lost */ -#define nRML5 0x0 #define RML6 0x40 /* Mailbox 6 Receive Message Lost */ -#define nRML6 0x0 #define RML7 0x80 /* Mailbox 7 Receive Message Lost */ -#define nRML7 0x0 #define RML8 0x100 /* Mailbox 8 Receive Message Lost */ -#define nRML8 0x0 #define RML9 0x200 /* Mailbox 9 Receive Message Lost */ -#define nRML9 0x0 #define RML10 0x400 /* Mailbox 10 Receive Message Lost */ -#define nRML10 0x0 #define RML11 0x800 /* Mailbox 11 Receive Message Lost */ -#define nRML11 0x0 #define RML12 0x1000 /* Mailbox 12 Receive Message Lost */ -#define nRML12 0x0 #define RML13 0x2000 /* Mailbox 13 Receive Message Lost */ -#define nRML13 0x0 #define RML14 0x4000 /* Mailbox 14 Receive Message Lost */ -#define nRML14 0x0 #define RML15 0x8000 /* Mailbox 15 Receive Message Lost */ -#define nRML15 0x0 /* Bit masks for CAN0_RML2 */ #define RML16 0x1 /* Mailbox 16 Receive Message Lost */ -#define nRML16 0x0 #define RML17 0x2 /* Mailbox 17 Receive Message Lost */ -#define nRML17 0x0 #define RML18 0x4 /* Mailbox 18 Receive Message Lost */ -#define nRML18 0x0 #define RML19 0x8 /* Mailbox 19 Receive Message Lost */ -#define nRML19 0x0 #define RML20 0x10 /* Mailbox 20 Receive Message Lost */ -#define nRML20 0x0 #define RML21 0x20 /* Mailbox 21 Receive Message Lost */ -#define nRML21 0x0 #define RML22 0x40 /* Mailbox 22 Receive Message Lost */ -#define nRML22 0x0 #define RML23 0x80 /* Mailbox 23 Receive Message Lost */ -#define nRML23 0x0 #define RML24 0x100 /* Mailbox 24 Receive Message Lost */ -#define nRML24 0x0 #define RML25 0x200 /* Mailbox 25 Receive Message Lost */ -#define nRML25 0x0 #define RML26 0x400 /* Mailbox 26 Receive Message Lost */ -#define nRML26 0x0 #define RML27 0x800 /* Mailbox 27 Receive Message Lost */ -#define nRML27 0x0 #define RML28 0x1000 /* Mailbox 28 Receive Message Lost */ -#define nRML28 0x0 #define RML29 0x2000 /* Mailbox 29 Receive Message Lost */ -#define nRML29 0x0 #define RML30 0x4000 /* Mailbox 30 Receive Message Lost */ -#define nRML30 0x0 #define RML31 0x8000 /* Mailbox 31 Receive Message Lost */ -#define nRML31 0x0 /* Bit masks for CAN0_OPSS1 */ #define OPSS0 0x1 /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS0 0x0 #define OPSS1 0x2 /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS1 0x0 #define OPSS2 0x4 /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS2 0x0 #define OPSS3 0x8 /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS3 0x0 #define OPSS4 0x10 /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS4 0x0 #define OPSS5 0x20 /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS5 0x0 #define OPSS6 0x40 /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS6 0x0 #define OPSS7 0x80 /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS7 0x0 #define OPSS8 0x100 /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS8 0x0 #define OPSS9 0x200 /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS9 0x0 #define OPSS10 0x400 /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS10 0x0 #define OPSS11 0x800 /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS11 0x0 #define OPSS12 0x1000 /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS12 0x0 #define OPSS13 0x2000 /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS13 0x0 #define OPSS14 0x4000 /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS14 0x0 #define OPSS15 0x8000 /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS15 0x0 /* Bit masks for CAN0_OPSS2 */ #define OPSS16 0x1 /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS16 0x0 #define OPSS17 0x2 /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS17 0x0 #define OPSS18 0x4 /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS18 0x0 #define OPSS19 0x8 /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS19 0x0 #define OPSS20 0x10 /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS20 0x0 #define OPSS21 0x20 /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS21 0x0 #define OPSS22 0x40 /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS22 0x0 #define OPSS23 0x80 /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS23 0x0 #define OPSS24 0x100 /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS24 0x0 #define OPSS25 0x200 /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS25 0x0 #define OPSS26 0x400 /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS26 0x0 #define OPSS27 0x800 /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS27 0x0 #define OPSS28 0x1000 /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS28 0x0 #define OPSS29 0x2000 /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS29 0x0 #define OPSS30 0x4000 /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS30 0x0 #define OPSS31 0x8000 /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */ -#define nOPSS31 0x0 /* Bit masks for CAN0_TRS1 */ #define TRS0 0x1 /* Mailbox 0 Transmit Request Set */ -#define nTRS0 0x0 #define TRS1 0x2 /* Mailbox 1 Transmit Request Set */ -#define nTRS1 0x0 #define TRS2 0x4 /* Mailbox 2 Transmit Request Set */ -#define nTRS2 0x0 #define TRS3 0x8 /* Mailbox 3 Transmit Request Set */ -#define nTRS3 0x0 #define TRS4 0x10 /* Mailbox 4 Transmit Request Set */ -#define nTRS4 0x0 #define TRS5 0x20 /* Mailbox 5 Transmit Request Set */ -#define nTRS5 0x0 #define TRS6 0x40 /* Mailbox 6 Transmit Request Set */ -#define nTRS6 0x0 #define TRS7 0x80 /* Mailbox 7 Transmit Request Set */ -#define nTRS7 0x0 #define TRS8 0x100 /* Mailbox 8 Transmit Request Set */ -#define nTRS8 0x0 #define TRS9 0x200 /* Mailbox 9 Transmit Request Set */ -#define nTRS9 0x0 #define TRS10 0x400 /* Mailbox 10 Transmit Request Set */ -#define nTRS10 0x0 #define TRS11 0x800 /* Mailbox 11 Transmit Request Set */ -#define nTRS11 0x0 #define TRS12 0x1000 /* Mailbox 12 Transmit Request Set */ -#define nTRS12 0x0 #define TRS13 0x2000 /* Mailbox 13 Transmit Request Set */ -#define nTRS13 0x0 #define TRS14 0x4000 /* Mailbox 14 Transmit Request Set */ -#define nTRS14 0x0 #define TRS15 0x8000 /* Mailbox 15 Transmit Request Set */ -#define nTRS15 0x0 /* Bit masks for CAN0_TRS2 */ #define TRS16 0x1 /* Mailbox 16 Transmit Request Set */ -#define nTRS16 0x0 #define TRS17 0x2 /* Mailbox 17 Transmit Request Set */ -#define nTRS17 0x0 #define TRS18 0x4 /* Mailbox 18 Transmit Request Set */ -#define nTRS18 0x0 #define TRS19 0x8 /* Mailbox 19 Transmit Request Set */ -#define nTRS19 0x0 #define TRS20 0x10 /* Mailbox 20 Transmit Request Set */ -#define nTRS20 0x0 #define TRS21 0x20 /* Mailbox 21 Transmit Request Set */ -#define nTRS21 0x0 #define TRS22 0x40 /* Mailbox 22 Transmit Request Set */ -#define nTRS22 0x0 #define TRS23 0x80 /* Mailbox 23 Transmit Request Set */ -#define nTRS23 0x0 #define TRS24 0x100 /* Mailbox 24 Transmit Request Set */ -#define nTRS24 0x0 #define TRS25 0x200 /* Mailbox 25 Transmit Request Set */ -#define nTRS25 0x0 #define TRS26 0x400 /* Mailbox 26 Transmit Request Set */ -#define nTRS26 0x0 #define TRS27 0x800 /* Mailbox 27 Transmit Request Set */ -#define nTRS27 0x0 #define TRS28 0x1000 /* Mailbox 28 Transmit Request Set */ -#define nTRS28 0x0 #define TRS29 0x2000 /* Mailbox 29 Transmit Request Set */ -#define nTRS29 0x0 #define TRS30 0x4000 /* Mailbox 30 Transmit Request Set */ -#define nTRS30 0x0 #define TRS31 0x8000 /* Mailbox 31 Transmit Request Set */ -#define nTRS31 0x0 /* Bit masks for CAN0_TRR1 */ #define TRR0 0x1 /* Mailbox 0 Transmit Request Reset */ -#define nTRR0 0x0 #define TRR1 0x2 /* Mailbox 1 Transmit Request Reset */ -#define nTRR1 0x0 #define TRR2 0x4 /* Mailbox 2 Transmit Request Reset */ -#define nTRR2 0x0 #define TRR3 0x8 /* Mailbox 3 Transmit Request Reset */ -#define nTRR3 0x0 #define TRR4 0x10 /* Mailbox 4 Transmit Request Reset */ -#define nTRR4 0x0 #define TRR5 0x20 /* Mailbox 5 Transmit Request Reset */ -#define nTRR5 0x0 #define TRR6 0x40 /* Mailbox 6 Transmit Request Reset */ -#define nTRR6 0x0 #define TRR7 0x80 /* Mailbox 7 Transmit Request Reset */ -#define nTRR7 0x0 #define TRR8 0x100 /* Mailbox 8 Transmit Request Reset */ -#define nTRR8 0x0 #define TRR9 0x200 /* Mailbox 9 Transmit Request Reset */ -#define nTRR9 0x0 #define TRR10 0x400 /* Mailbox 10 Transmit Request Reset */ -#define nTRR10 0x0 #define TRR11 0x800 /* Mailbox 11 Transmit Request Reset */ -#define nTRR11 0x0 #define TRR12 0x1000 /* Mailbox 12 Transmit Request Reset */ -#define nTRR12 0x0 #define TRR13 0x2000 /* Mailbox 13 Transmit Request Reset */ -#define nTRR13 0x0 #define TRR14 0x4000 /* Mailbox 14 Transmit Request Reset */ -#define nTRR14 0x0 #define TRR15 0x8000 /* Mailbox 15 Transmit Request Reset */ -#define nTRR15 0x0 /* Bit masks for CAN0_TRR2 */ #define TRR16 0x1 /* Mailbox 16 Transmit Request Reset */ -#define nTRR16 0x0 #define TRR17 0x2 /* Mailbox 17 Transmit Request Reset */ -#define nTRR17 0x0 #define TRR18 0x4 /* Mailbox 18 Transmit Request Reset */ -#define nTRR18 0x0 #define TRR19 0x8 /* Mailbox 19 Transmit Request Reset */ -#define nTRR19 0x0 #define TRR20 0x10 /* Mailbox 20 Transmit Request Reset */ -#define nTRR20 0x0 #define TRR21 0x20 /* Mailbox 21 Transmit Request Reset */ -#define nTRR21 0x0 #define TRR22 0x40 /* Mailbox 22 Transmit Request Reset */ -#define nTRR22 0x0 #define TRR23 0x80 /* Mailbox 23 Transmit Request Reset */ -#define nTRR23 0x0 #define TRR24 0x100 /* Mailbox 24 Transmit Request Reset */ -#define nTRR24 0x0 #define TRR25 0x200 /* Mailbox 25 Transmit Request Reset */ -#define nTRR25 0x0 #define TRR26 0x400 /* Mailbox 26 Transmit Request Reset */ -#define nTRR26 0x0 #define TRR27 0x800 /* Mailbox 27 Transmit Request Reset */ -#define nTRR27 0x0 #define TRR28 0x1000 /* Mailbox 28 Transmit Request Reset */ -#define nTRR28 0x0 #define TRR29 0x2000 /* Mailbox 29 Transmit Request Reset */ -#define nTRR29 0x0 #define TRR30 0x4000 /* Mailbox 30 Transmit Request Reset */ -#define nTRR30 0x0 #define TRR31 0x8000 /* Mailbox 31 Transmit Request Reset */ -#define nTRR31 0x0 /* Bit masks for CAN0_AA1 */ #define AA0 0x1 /* Mailbox 0 Abort Acknowledge */ -#define nAA0 0x0 #define AA1 0x2 /* Mailbox 1 Abort Acknowledge */ -#define nAA1 0x0 #define AA2 0x4 /* Mailbox 2 Abort Acknowledge */ -#define nAA2 0x0 #define AA3 0x8 /* Mailbox 3 Abort Acknowledge */ -#define nAA3 0x0 #define AA4 0x10 /* Mailbox 4 Abort Acknowledge */ -#define nAA4 0x0 #define AA5 0x20 /* Mailbox 5 Abort Acknowledge */ -#define nAA5 0x0 #define AA6 0x40 /* Mailbox 6 Abort Acknowledge */ -#define nAA6 0x0 #define AA7 0x80 /* Mailbox 7 Abort Acknowledge */ -#define nAA7 0x0 #define AA8 0x100 /* Mailbox 8 Abort Acknowledge */ -#define nAA8 0x0 #define AA9 0x200 /* Mailbox 9 Abort Acknowledge */ -#define nAA9 0x0 #define AA10 0x400 /* Mailbox 10 Abort Acknowledge */ -#define nAA10 0x0 #define AA11 0x800 /* Mailbox 11 Abort Acknowledge */ -#define nAA11 0x0 #define AA12 0x1000 /* Mailbox 12 Abort Acknowledge */ -#define nAA12 0x0 #define AA13 0x2000 /* Mailbox 13 Abort Acknowledge */ -#define nAA13 0x0 #define AA14 0x4000 /* Mailbox 14 Abort Acknowledge */ -#define nAA14 0x0 #define AA15 0x8000 /* Mailbox 15 Abort Acknowledge */ -#define nAA15 0x0 /* Bit masks for CAN0_AA2 */ #define AA16 0x1 /* Mailbox 16 Abort Acknowledge */ -#define nAA16 0x0 #define AA17 0x2 /* Mailbox 17 Abort Acknowledge */ -#define nAA17 0x0 #define AA18 0x4 /* Mailbox 18 Abort Acknowledge */ -#define nAA18 0x0 #define AA19 0x8 /* Mailbox 19 Abort Acknowledge */ -#define nAA19 0x0 #define AA20 0x10 /* Mailbox 20 Abort Acknowledge */ -#define nAA20 0x0 #define AA21 0x20 /* Mailbox 21 Abort Acknowledge */ -#define nAA21 0x0 #define AA22 0x40 /* Mailbox 22 Abort Acknowledge */ -#define nAA22 0x0 #define AA23 0x80 /* Mailbox 23 Abort Acknowledge */ -#define nAA23 0x0 #define AA24 0x100 /* Mailbox 24 Abort Acknowledge */ -#define nAA24 0x0 #define AA25 0x200 /* Mailbox 25 Abort Acknowledge */ -#define nAA25 0x0 #define AA26 0x400 /* Mailbox 26 Abort Acknowledge */ -#define nAA26 0x0 #define AA27 0x800 /* Mailbox 27 Abort Acknowledge */ -#define nAA27 0x0 #define AA28 0x1000 /* Mailbox 28 Abort Acknowledge */ -#define nAA28 0x0 #define AA29 0x2000 /* Mailbox 29 Abort Acknowledge */ -#define nAA29 0x0 #define AA30 0x4000 /* Mailbox 30 Abort Acknowledge */ -#define nAA30 0x0 #define AA31 0x8000 /* Mailbox 31 Abort Acknowledge */ -#define nAA31 0x0 /* Bit masks for CAN0_TA1 */ #define TA0 0x1 /* Mailbox 0 Transmit Acknowledge */ -#define nTA0 0x0 #define TA1 0x2 /* Mailbox 1 Transmit Acknowledge */ -#define nTA1 0x0 #define TA2 0x4 /* Mailbox 2 Transmit Acknowledge */ -#define nTA2 0x0 #define TA3 0x8 /* Mailbox 3 Transmit Acknowledge */ -#define nTA3 0x0 #define TA4 0x10 /* Mailbox 4 Transmit Acknowledge */ -#define nTA4 0x0 #define TA5 0x20 /* Mailbox 5 Transmit Acknowledge */ -#define nTA5 0x0 #define TA6 0x40 /* Mailbox 6 Transmit Acknowledge */ -#define nTA6 0x0 #define TA7 0x80 /* Mailbox 7 Transmit Acknowledge */ -#define nTA7 0x0 #define TA8 0x100 /* Mailbox 8 Transmit Acknowledge */ -#define nTA8 0x0 #define TA9 0x200 /* Mailbox 9 Transmit Acknowledge */ -#define nTA9 0x0 #define TA10 0x400 /* Mailbox 10 Transmit Acknowledge */ -#define nTA10 0x0 #define TA11 0x800 /* Mailbox 11 Transmit Acknowledge */ -#define nTA11 0x0 #define TA12 0x1000 /* Mailbox 12 Transmit Acknowledge */ -#define nTA12 0x0 #define TA13 0x2000 /* Mailbox 13 Transmit Acknowledge */ -#define nTA13 0x0 #define TA14 0x4000 /* Mailbox 14 Transmit Acknowledge */ -#define nTA14 0x0 #define TA15 0x8000 /* Mailbox 15 Transmit Acknowledge */ -#define nTA15 0x0 /* Bit masks for CAN0_TA2 */ #define TA16 0x1 /* Mailbox 16 Transmit Acknowledge */ -#define nTA16 0x0 #define TA17 0x2 /* Mailbox 17 Transmit Acknowledge */ -#define nTA17 0x0 #define TA18 0x4 /* Mailbox 18 Transmit Acknowledge */ -#define nTA18 0x0 #define TA19 0x8 /* Mailbox 19 Transmit Acknowledge */ -#define nTA19 0x0 #define TA20 0x10 /* Mailbox 20 Transmit Acknowledge */ -#define nTA20 0x0 #define TA21 0x20 /* Mailbox 21 Transmit Acknowledge */ -#define nTA21 0x0 #define TA22 0x40 /* Mailbox 22 Transmit Acknowledge */ -#define nTA22 0x0 #define TA23 0x80 /* Mailbox 23 Transmit Acknowledge */ -#define nTA23 0x0 #define TA24 0x100 /* Mailbox 24 Transmit Acknowledge */ -#define nTA24 0x0 #define TA25 0x200 /* Mailbox 25 Transmit Acknowledge */ -#define nTA25 0x0 #define TA26 0x400 /* Mailbox 26 Transmit Acknowledge */ -#define nTA26 0x0 #define TA27 0x800 /* Mailbox 27 Transmit Acknowledge */ -#define nTA27 0x0 #define TA28 0x1000 /* Mailbox 28 Transmit Acknowledge */ -#define nTA28 0x0 #define TA29 0x2000 /* Mailbox 29 Transmit Acknowledge */ -#define nTA29 0x0 #define TA30 0x4000 /* Mailbox 30 Transmit Acknowledge */ -#define nTA30 0x0 #define TA31 0x8000 /* Mailbox 31 Transmit Acknowledge */ -#define nTA31 0x0 /* Bit masks for CAN0_RFH1 */ #define RFH0 0x1 /* Mailbox 0 Remote Frame Handling Enable */ -#define nRFH0 0x0 #define RFH1 0x2 /* Mailbox 1 Remote Frame Handling Enable */ -#define nRFH1 0x0 #define RFH2 0x4 /* Mailbox 2 Remote Frame Handling Enable */ -#define nRFH2 0x0 #define RFH3 0x8 /* Mailbox 3 Remote Frame Handling Enable */ -#define nRFH3 0x0 #define RFH4 0x10 /* Mailbox 4 Remote Frame Handling Enable */ -#define nRFH4 0x0 #define RFH5 0x20 /* Mailbox 5 Remote Frame Handling Enable */ -#define nRFH5 0x0 #define RFH6 0x40 /* Mailbox 6 Remote Frame Handling Enable */ -#define nRFH6 0x0 #define RFH7 0x80 /* Mailbox 7 Remote Frame Handling Enable */ -#define nRFH7 0x0 #define RFH8 0x100 /* Mailbox 8 Remote Frame Handling Enable */ -#define nRFH8 0x0 #define RFH9 0x200 /* Mailbox 9 Remote Frame Handling Enable */ -#define nRFH9 0x0 #define RFH10 0x400 /* Mailbox 10 Remote Frame Handling Enable */ -#define nRFH10 0x0 #define RFH11 0x800 /* Mailbox 11 Remote Frame Handling Enable */ -#define nRFH11 0x0 #define RFH12 0x1000 /* Mailbox 12 Remote Frame Handling Enable */ -#define nRFH12 0x0 #define RFH13 0x2000 /* Mailbox 13 Remote Frame Handling Enable */ -#define nRFH13 0x0 #define RFH14 0x4000 /* Mailbox 14 Remote Frame Handling Enable */ -#define nRFH14 0x0 #define RFH15 0x8000 /* Mailbox 15 Remote Frame Handling Enable */ -#define nRFH15 0x0 /* Bit masks for CAN0_RFH2 */ #define RFH16 0x1 /* Mailbox 16 Remote Frame Handling Enable */ -#define nRFH16 0x0 #define RFH17 0x2 /* Mailbox 17 Remote Frame Handling Enable */ -#define nRFH17 0x0 #define RFH18 0x4 /* Mailbox 18 Remote Frame Handling Enable */ -#define nRFH18 0x0 #define RFH19 0x8 /* Mailbox 19 Remote Frame Handling Enable */ -#define nRFH19 0x0 #define RFH20 0x10 /* Mailbox 20 Remote Frame Handling Enable */ -#define nRFH20 0x0 #define RFH21 0x20 /* Mailbox 21 Remote Frame Handling Enable */ -#define nRFH21 0x0 #define RFH22 0x40 /* Mailbox 22 Remote Frame Handling Enable */ -#define nRFH22 0x0 #define RFH23 0x80 /* Mailbox 23 Remote Frame Handling Enable */ -#define nRFH23 0x0 #define RFH24 0x100 /* Mailbox 24 Remote Frame Handling Enable */ -#define nRFH24 0x0 #define RFH25 0x200 /* Mailbox 25 Remote Frame Handling Enable */ -#define nRFH25 0x0 #define RFH26 0x400 /* Mailbox 26 Remote Frame Handling Enable */ -#define nRFH26 0x0 #define RFH27 0x800 /* Mailbox 27 Remote Frame Handling Enable */ -#define nRFH27 0x0 #define RFH28 0x1000 /* Mailbox 28 Remote Frame Handling Enable */ -#define nRFH28 0x0 #define RFH29 0x2000 /* Mailbox 29 Remote Frame Handling Enable */ -#define nRFH29 0x0 #define RFH30 0x4000 /* Mailbox 30 Remote Frame Handling Enable */ -#define nRFH30 0x0 #define RFH31 0x8000 /* Mailbox 31 Remote Frame Handling Enable */ -#define nRFH31 0x0 /* Bit masks for CAN0_MBIM1 */ #define MBIM0 0x1 /* Mailbox 0 Mailbox Interrupt Mask */ -#define nMBIM0 0x0 #define MBIM1 0x2 /* Mailbox 1 Mailbox Interrupt Mask */ -#define nMBIM1 0x0 #define MBIM2 0x4 /* Mailbox 2 Mailbox Interrupt Mask */ -#define nMBIM2 0x0 #define MBIM3 0x8 /* Mailbox 3 Mailbox Interrupt Mask */ -#define nMBIM3 0x0 #define MBIM4 0x10 /* Mailbox 4 Mailbox Interrupt Mask */ -#define nMBIM4 0x0 #define MBIM5 0x20 /* Mailbox 5 Mailbox Interrupt Mask */ -#define nMBIM5 0x0 #define MBIM6 0x40 /* Mailbox 6 Mailbox Interrupt Mask */ -#define nMBIM6 0x0 #define MBIM7 0x80 /* Mailbox 7 Mailbox Interrupt Mask */ -#define nMBIM7 0x0 #define MBIM8 0x100 /* Mailbox 8 Mailbox Interrupt Mask */ -#define nMBIM8 0x0 #define MBIM9 0x200 /* Mailbox 9 Mailbox Interrupt Mask */ -#define nMBIM9 0x0 #define MBIM10 0x400 /* Mailbox 10 Mailbox Interrupt Mask */ -#define nMBIM10 0x0 #define MBIM11 0x800 /* Mailbox 11 Mailbox Interrupt Mask */ -#define nMBIM11 0x0 #define MBIM12 0x1000 /* Mailbox 12 Mailbox Interrupt Mask */ -#define nMBIM12 0x0 #define MBIM13 0x2000 /* Mailbox 13 Mailbox Interrupt Mask */ -#define nMBIM13 0x0 #define MBIM14 0x4000 /* Mailbox 14 Mailbox Interrupt Mask */ -#define nMBIM14 0x0 #define MBIM15 0x8000 /* Mailbox 15 Mailbox Interrupt Mask */ -#define nMBIM15 0x0 /* Bit masks for CAN0_MBIM2 */ #define MBIM16 0x1 /* Mailbox 16 Mailbox Interrupt Mask */ -#define nMBIM16 0x0 #define MBIM17 0x2 /* Mailbox 17 Mailbox Interrupt Mask */ -#define nMBIM17 0x0 #define MBIM18 0x4 /* Mailbox 18 Mailbox Interrupt Mask */ -#define nMBIM18 0x0 #define MBIM19 0x8 /* Mailbox 19 Mailbox Interrupt Mask */ -#define nMBIM19 0x0 #define MBIM20 0x10 /* Mailbox 20 Mailbox Interrupt Mask */ -#define nMBIM20 0x0 #define MBIM21 0x20 /* Mailbox 21 Mailbox Interrupt Mask */ -#define nMBIM21 0x0 #define MBIM22 0x40 /* Mailbox 22 Mailbox Interrupt Mask */ -#define nMBIM22 0x0 #define MBIM23 0x80 /* Mailbox 23 Mailbox Interrupt Mask */ -#define nMBIM23 0x0 #define MBIM24 0x100 /* Mailbox 24 Mailbox Interrupt Mask */ -#define nMBIM24 0x0 #define MBIM25 0x200 /* Mailbox 25 Mailbox Interrupt Mask */ -#define nMBIM25 0x0 #define MBIM26 0x400 /* Mailbox 26 Mailbox Interrupt Mask */ -#define nMBIM26 0x0 #define MBIM27 0x800 /* Mailbox 27 Mailbox Interrupt Mask */ -#define nMBIM27 0x0 #define MBIM28 0x1000 /* Mailbox 28 Mailbox Interrupt Mask */ -#define nMBIM28 0x0 #define MBIM29 0x2000 /* Mailbox 29 Mailbox Interrupt Mask */ -#define nMBIM29 0x0 #define MBIM30 0x4000 /* Mailbox 30 Mailbox Interrupt Mask */ -#define nMBIM30 0x0 #define MBIM31 0x8000 /* Mailbox 31 Mailbox Interrupt Mask */ -#define nMBIM31 0x0 /* Bit masks for CAN0_MBTIF1 */ #define MBTIF0 0x1 /* Mailbox 0 Mailbox Transmit Interrupt Flag */ -#define nMBTIF0 0x0 #define MBTIF1 0x2 /* Mailbox 1 Mailbox Transmit Interrupt Flag */ -#define nMBTIF1 0x0 #define MBTIF2 0x4 /* Mailbox 2 Mailbox Transmit Interrupt Flag */ -#define nMBTIF2 0x0 #define MBTIF3 0x8 /* Mailbox 3 Mailbox Transmit Interrupt Flag */ -#define nMBTIF3 0x0 #define MBTIF4 0x10 /* Mailbox 4 Mailbox Transmit Interrupt Flag */ -#define nMBTIF4 0x0 #define MBTIF5 0x20 /* Mailbox 5 Mailbox Transmit Interrupt Flag */ -#define nMBTIF5 0x0 #define MBTIF6 0x40 /* Mailbox 6 Mailbox Transmit Interrupt Flag */ -#define nMBTIF6 0x0 #define MBTIF7 0x80 /* Mailbox 7 Mailbox Transmit Interrupt Flag */ -#define nMBTIF7 0x0 #define MBTIF8 0x100 /* Mailbox 8 Mailbox Transmit Interrupt Flag */ -#define nMBTIF8 0x0 #define MBTIF9 0x200 /* Mailbox 9 Mailbox Transmit Interrupt Flag */ -#define nMBTIF9 0x0 #define MBTIF10 0x400 /* Mailbox 10 Mailbox Transmit Interrupt Flag */ -#define nMBTIF10 0x0 #define MBTIF11 0x800 /* Mailbox 11 Mailbox Transmit Interrupt Flag */ -#define nMBTIF11 0x0 #define MBTIF12 0x1000 /* Mailbox 12 Mailbox Transmit Interrupt Flag */ -#define nMBTIF12 0x0 #define MBTIF13 0x2000 /* Mailbox 13 Mailbox Transmit Interrupt Flag */ -#define nMBTIF13 0x0 #define MBTIF14 0x4000 /* Mailbox 14 Mailbox Transmit Interrupt Flag */ -#define nMBTIF14 0x0 #define MBTIF15 0x8000 /* Mailbox 15 Mailbox Transmit Interrupt Flag */ -#define nMBTIF15 0x0 /* Bit masks for CAN0_MBTIF2 */ #define MBTIF16 0x1 /* Mailbox 16 Mailbox Transmit Interrupt Flag */ -#define nMBTIF16 0x0 #define MBTIF17 0x2 /* Mailbox 17 Mailbox Transmit Interrupt Flag */ -#define nMBTIF17 0x0 #define MBTIF18 0x4 /* Mailbox 18 Mailbox Transmit Interrupt Flag */ -#define nMBTIF18 0x0 #define MBTIF19 0x8 /* Mailbox 19 Mailbox Transmit Interrupt Flag */ -#define nMBTIF19 0x0 #define MBTIF20 0x10 /* Mailbox 20 Mailbox Transmit Interrupt Flag */ -#define nMBTIF20 0x0 #define MBTIF21 0x20 /* Mailbox 21 Mailbox Transmit Interrupt Flag */ -#define nMBTIF21 0x0 #define MBTIF22 0x40 /* Mailbox 22 Mailbox Transmit Interrupt Flag */ -#define nMBTIF22 0x0 #define MBTIF23 0x80 /* Mailbox 23 Mailbox Transmit Interrupt Flag */ -#define nMBTIF23 0x0 #define MBTIF24 0x100 /* Mailbox 24 Mailbox Transmit Interrupt Flag */ -#define nMBTIF24 0x0 #define MBTIF25 0x200 /* Mailbox 25 Mailbox Transmit Interrupt Flag */ -#define nMBTIF25 0x0 #define MBTIF26 0x400 /* Mailbox 26 Mailbox Transmit Interrupt Flag */ -#define nMBTIF26 0x0 #define MBTIF27 0x800 /* Mailbox 27 Mailbox Transmit Interrupt Flag */ -#define nMBTIF27 0x0 #define MBTIF28 0x1000 /* Mailbox 28 Mailbox Transmit Interrupt Flag */ -#define nMBTIF28 0x0 #define MBTIF29 0x2000 /* Mailbox 29 Mailbox Transmit Interrupt Flag */ -#define nMBTIF29 0x0 #define MBTIF30 0x4000 /* Mailbox 30 Mailbox Transmit Interrupt Flag */ -#define nMBTIF30 0x0 #define MBTIF31 0x8000 /* Mailbox 31 Mailbox Transmit Interrupt Flag */ -#define nMBTIF31 0x0 /* Bit masks for CAN0_MBRIF1 */ #define MBRIF0 0x1 /* Mailbox 0 Mailbox Receive Interrupt Flag */ -#define nMBRIF0 0x0 #define MBRIF1 0x2 /* Mailbox 1 Mailbox Receive Interrupt Flag */ -#define nMBRIF1 0x0 #define MBRIF2 0x4 /* Mailbox 2 Mailbox Receive Interrupt Flag */ -#define nMBRIF2 0x0 #define MBRIF3 0x8 /* Mailbox 3 Mailbox Receive Interrupt Flag */ -#define nMBRIF3 0x0 #define MBRIF4 0x10 /* Mailbox 4 Mailbox Receive Interrupt Flag */ -#define nMBRIF4 0x0 #define MBRIF5 0x20 /* Mailbox 5 Mailbox Receive Interrupt Flag */ -#define nMBRIF5 0x0 #define MBRIF6 0x40 /* Mailbox 6 Mailbox Receive Interrupt Flag */ -#define nMBRIF6 0x0 #define MBRIF7 0x80 /* Mailbox 7 Mailbox Receive Interrupt Flag */ -#define nMBRIF7 0x0 #define MBRIF8 0x100 /* Mailbox 8 Mailbox Receive Interrupt Flag */ -#define nMBRIF8 0x0 #define MBRIF9 0x200 /* Mailbox 9 Mailbox Receive Interrupt Flag */ -#define nMBRIF9 0x0 #define MBRIF10 0x400 /* Mailbox 10 Mailbox Receive Interrupt Flag */ -#define nMBRIF10 0x0 #define MBRIF11 0x800 /* Mailbox 11 Mailbox Receive Interrupt Flag */ -#define nMBRIF11 0x0 #define MBRIF12 0x1000 /* Mailbox 12 Mailbox Receive Interrupt Flag */ -#define nMBRIF12 0x0 #define MBRIF13 0x2000 /* Mailbox 13 Mailbox Receive Interrupt Flag */ -#define nMBRIF13 0x0 #define MBRIF14 0x4000 /* Mailbox 14 Mailbox Receive Interrupt Flag */ -#define nMBRIF14 0x0 #define MBRIF15 0x8000 /* Mailbox 15 Mailbox Receive Interrupt Flag */ -#define nMBRIF15 0x0 /* Bit masks for CAN0_MBRIF2 */ #define MBRIF16 0x1 /* Mailbox 16 Mailbox Receive Interrupt Flag */ -#define nMBRIF16 0x0 #define MBRIF17 0x2 /* Mailbox 17 Mailbox Receive Interrupt Flag */ -#define nMBRIF17 0x0 #define MBRIF18 0x4 /* Mailbox 18 Mailbox Receive Interrupt Flag */ -#define nMBRIF18 0x0 #define MBRIF19 0x8 /* Mailbox 19 Mailbox Receive Interrupt Flag */ -#define nMBRIF19 0x0 #define MBRIF20 0x10 /* Mailbox 20 Mailbox Receive Interrupt Flag */ -#define nMBRIF20 0x0 #define MBRIF21 0x20 /* Mailbox 21 Mailbox Receive Interrupt Flag */ -#define nMBRIF21 0x0 #define MBRIF22 0x40 /* Mailbox 22 Mailbox Receive Interrupt Flag */ -#define nMBRIF22 0x0 #define MBRIF23 0x80 /* Mailbox 23 Mailbox Receive Interrupt Flag */ -#define nMBRIF23 0x0 #define MBRIF24 0x100 /* Mailbox 24 Mailbox Receive Interrupt Flag */ -#define nMBRIF24 0x0 #define MBRIF25 0x200 /* Mailbox 25 Mailbox Receive Interrupt Flag */ -#define nMBRIF25 0x0 #define MBRIF26 0x400 /* Mailbox 26 Mailbox Receive Interrupt Flag */ -#define nMBRIF26 0x0 #define MBRIF27 0x800 /* Mailbox 27 Mailbox Receive Interrupt Flag */ -#define nMBRIF27 0x0 #define MBRIF28 0x1000 /* Mailbox 28 Mailbox Receive Interrupt Flag */ -#define nMBRIF28 0x0 #define MBRIF29 0x2000 /* Mailbox 29 Mailbox Receive Interrupt Flag */ -#define nMBRIF29 0x0 #define MBRIF30 0x4000 /* Mailbox 30 Mailbox Receive Interrupt Flag */ -#define nMBRIF30 0x0 #define MBRIF31 0x8000 /* Mailbox 31 Mailbox Receive Interrupt Flag */ -#define nMBRIF31 0x0 /* Bit masks for EPPIx_STATUS */ #define CFIFO_ERR 0x1 /* Chroma FIFO Error */ -#define nCFIFO_ERR 0x0 #define YFIFO_ERR 0x2 /* Luma FIFO Error */ -#define nYFIFO_ERR 0x0 #define LTERR_OVR 0x4 /* Line Track Overflow */ -#define nLTERR_OVR 0x0 #define LTERR_UNDR 0x8 /* Line Track Underflow */ -#define nLTERR_UNDR 0x0 #define FTERR_OVR 0x10 /* Frame Track Overflow */ -#define nFTERR_OVR 0x0 #define FTERR_UNDR 0x20 /* Frame Track Underflow */ -#define nFTERR_UNDR 0x0 #define ERR_NCOR 0x40 /* Preamble Error Not Corrected */ -#define nERR_NCOR 0x0 #define DMA1URQ 0x80 /* DMA1 Urgent Request */ -#define nDMA1URQ 0x0 #define DMA0URQ 0x100 /* DMA0 Urgent Request */ -#define nDMA0URQ 0x0 #define ERR_DET 0x4000 /* Preamble Error Detected */ -#define nERR_DET 0x0 #define FLD 0x8000 /* Field */ -#define nFLD 0x0 /* Bit masks for EPPIx_CONTROL */ #define EPPI_EN 0x1 /* Enable */ -#define nEPPI_EN 0x0 #define EPPI_DIR 0x2 /* Direction */ -#define nEPPI_DIR 0x0 #define XFR_TYPE 0xc /* Operating Mode */ #define FS_CFG 0x30 /* Frame Sync Configuration */ #define FLD_SEL 0x40 /* Field Select/Trigger */ -#define nFLD_SEL 0x0 #define ITU_TYPE 0x80 /* ITU Interlaced or Progressive */ -#define nITU_TYPE 0x0 #define BLANKGEN 0x100 /* ITU Output Mode with Internal Blanking Generation */ -#define nBLANKGEN 0x0 #define ICLKGEN 0x200 /* Internal Clock Generation */ -#define nICLKGEN 0x0 #define IFSGEN 0x400 /* Internal Frame Sync Generation */ -#define nIFSGEN 0x0 #define POLC 0x1800 /* Frame Sync and Data Driving/Sampling Edges */ #define POLS 0x6000 /* Frame Sync Polarity */ #define DLENGTH 0x38000 /* Data Length */ #define SKIP_EN 0x40000 /* Skip Enable */ -#define nSKIP_EN 0x0 #define SKIP_EO 0x80000 /* Skip Even or Odd */ -#define nSKIP_EO 0x0 #define PACKEN 0x100000 /* Packing/Unpacking Enable */ -#define nPACKEN 0x0 #define SWAPEN 0x200000 /* Swap Enable */ -#define nSWAPEN 0x0 #define SIGN_EXT 0x400000 /* Sign Extension or Zero-filled / Data Split Format */ -#define nSIGN_EXT 0x0 #define SPLT_EVEN_ODD 0x800000 /* Split Even and Odd Data Samples */ -#define nSPLT_EVEN_ODD 0x0 #define SUBSPLT_ODD 0x1000000 /* Sub-split Odd Samples */ -#define nSUBSPLT_ODD 0x0 #define DMACFG 0x2000000 /* One or Two DMA Channels Mode */ -#define nDMACFG 0x0 #define RGB_FMT_EN 0x4000000 /* RGB Formatting Enable */ -#define nRGB_FMT_EN 0x0 #define FIFO_RWM 0x18000000 /* FIFO Regular Watermarks */ #define FIFO_UWM 0x60000000 /* FIFO Urgent Watermarks */ @@ -3951,60 +3076,36 @@ /* Bit masks for SPIx_CTL */ #define SPE 0x4000 /* SPI Enable */ -#define nSPE 0x0 #define WOM 0x2000 /* Write Open Drain Master */ -#define nWOM 0x0 #define MSTR 0x1000 /* Master Mode */ -#define nMSTR 0x0 #define CPOL 0x800 /* Clock Polarity */ -#define nCPOL 0x0 #define CPHA 0x400 /* Clock Phase */ -#define nCPHA 0x0 #define LSBF 0x200 /* LSB First */ -#define nLSBF 0x0 #define SIZE 0x100 /* Size of Words */ -#define nSIZE 0x0 #define EMISO 0x20 /* Enable MISO Output */ -#define nEMISO 0x0 #define PSSE 0x10 /* Slave-Select Enable */ -#define nPSSE 0x0 #define GM 0x8 /* Get More Data */ -#define nGM 0x0 #define SZ 0x4 /* Send Zero */ -#define nSZ 0x0 #define TIMOD 0x3 /* Transfer Initiation Mode */ /* Bit masks for SPIx_FLG */ #define FLS1 0x2 /* Slave Select Enable 1 */ -#define nFLS1 0x0 #define FLS2 0x4 /* Slave Select Enable 2 */ -#define nFLS2 0x0 #define FLS3 0x8 /* Slave Select Enable 3 */ -#define nFLS3 0x0 #define FLG1 0x200 /* Slave Select Value 1 */ -#define nFLG1 0x0 #define FLG2 0x400 /* Slave Select Value 2 */ -#define nFLG2 0x0 #define FLG3 0x800 /* Slave Select Value 3 */ -#define nFLG3 0x0 /* Bit masks for SPIx_STAT */ #define TXCOL 0x40 /* Transmit Collision Error */ -#define nTXCOL 0x0 #define RXS 0x20 /* RDBR Data Buffer Status */ -#define nRXS 0x0 #define RBSY 0x10 /* Receive Error */ -#define nRBSY 0x0 #define TXS 0x8 /* TDBR Data Buffer Status */ -#define nTXS 0x0 #define TXE 0x4 /* Transmission Error */ -#define nTXE 0x0 #define MODF 0x2 /* Mode Fault Error */ -#define nMODF 0x0 #define SPIF 0x1 /* SPI Finished */ -#define nSPIF 0x0 /* Bit masks for SPIx_TDBR */ @@ -4028,9 +3129,7 @@ #define PRESCALE 0x7f /* Prescale Value */ #define TWI_ENA 0x80 /* TWI Enable */ -#define nTWI_ENA 0x0 #define SCCB 0x200 /* Serial Camera Control Bus */ -#define nSCCB 0x0 /* Bit maskes for TWIx_CLKDIV */ @@ -4040,13 +3139,9 @@ /* Bit maskes for TWIx_SLAVE_CTL */ #define SEN 0x1 /* Slave Enable */ -#define nSEN 0x0 #define STDVAL 0x4 /* Slave Transmit Data Valid */ -#define nSTDVAL 0x0 #define NAK 0x8 /* Not Acknowledge */ -#define nNAK 0x0 #define GEN 0x10 /* General Call Enable */ -#define nGEN 0x0 /* Bit maskes for TWIx_SLAVE_ADDR */ @@ -4055,27 +3150,18 @@ /* Bit maskes for TWIx_SLAVE_STAT */ #define SDIR 0x1 /* Slave Transfer Direction */ -#define nSDIR 0x0 #define GCALL 0x2 /* General Call */ -#define nGCALL 0x0 /* Bit maskes for TWIx_MASTER_CTL */ #define MEN 0x1 /* Master Mode Enable */ -#define nMEN 0x0 #define MDIR 0x4 /* Master Transfer Direction */ -#define nMDIR 0x0 #define FAST 0x8 /* Fast Mode */ -#define nFAST 0x0 #define STOP 0x10 /* Issue Stop Condition */ -#define nSTOP 0x0 #define RSTART 0x20 /* Repeat Start */ -#define nRSTART 0x0 #define DCNT 0x3fc0 /* Data Transfer Count */ #define SDAOVR 0x4000 /* Serial Data Override */ -#define nSDAOVR 0x0 #define SCLOVR 0x8000 /* Serial Clock Override */ -#define nSCLOVR 0x0 /* Bit maskes for TWIx_MASTER_ADDR */ @@ -4084,34 +3170,21 @@ /* Bit maskes for TWIx_MASTER_STAT */ #define MPROG 0x1 /* Master Transfer in Progress */ -#define nMPROG 0x0 #define LOSTARB 0x2 /* Lost Arbitration */ -#define nLOSTARB 0x0 #define ANAK 0x4 /* Address Not Acknowledged */ -#define nANAK 0x0 #define DNAK 0x8 /* Data Not Acknowledged */ -#define nDNAK 0x0 #define BUFRDERR 0x10 /* Buffer Read Error */ -#define nBUFRDERR 0x0 #define BUFWRERR 0x20 /* Buffer Write Error */ -#define nBUFWRERR 0x0 #define SDASEN 0x40 /* Serial Data Sense */ -#define nSDASEN 0x0 #define SCLSEN 0x80 /* Serial Clock Sense */ -#define nSCLSEN 0x0 #define BUSBUSY 0x100 /* Bus Busy */ -#define nBUSBUSY 0x0 /* Bit maskes for TWIx_FIFO_CTL */ #define XMTFLUSH 0x1 /* Transmit Buffer Flush */ -#define nXMTFLUSH 0x0 #define RCVFLUSH 0x2 /* Receive Buffer Flush */ -#define nRCVFLUSH 0x0 #define XMTINTLEN 0x4 /* Transmit Buffer Interrupt Length */ -#define nXMTINTLEN 0x0 #define RCVINTLEN 0x8 /* Receive Buffer Interrupt Length */ -#define nRCVINTLEN 0x0 /* Bit maskes for TWIx_FIFO_STAT */ @@ -4121,40 +3194,24 @@ /* Bit maskes for TWIx_INT_MASK */ #define SINITM 0x1 /* Slave Transfer Initiated Interrupt Mask */ -#define nSINITM 0x0 #define SCOMPM 0x2 /* Slave Transfer Complete Interrupt Mask */ -#define nSCOMPM 0x0 #define SERRM 0x4 /* Slave Transfer Error Interrupt Mask */ -#define nSERRM 0x0 #define SOVFM 0x8 /* Slave Overflow Interrupt Mask */ -#define nSOVFM 0x0 #define MCOMPM 0x10 /* Master Transfer Complete Interrupt Mask */ -#define nMCOMPM 0x0 #define MERRM 0x20 /* Master Transfer Error Interrupt Mask */ -#define nMERRM 0x0 #define XMTSERVM 0x40 /* Transmit FIFO Service Interrupt Mask */ -#define nXMTSERVM 0x0 #define RCVSERVM 0x80 /* Receive FIFO Service Interrupt Mask */ -#define nRCVSERVM 0x0 /* Bit maskes for TWIx_INT_STAT */ #define SINIT 0x1 /* Slave Transfer Initiated */ -#define nSINIT 0x0 #define SCOMP 0x2 /* Slave Transfer Complete */ -#define nSCOMP 0x0 #define SERR 0x4 /* Slave Transfer Error */ -#define nSERR 0x0 #define SOVF 0x8 /* Slave Overflow */ -#define nSOVF 0x0 #define MCOMP 0x10 /* Master Transfer Complete */ -#define nMCOMP 0x0 #define MERR 0x20 /* Master Transfer Error */ -#define nMERR 0x0 #define XMTSERV 0x40 /* Transmit FIFO Service */ -#define nXMTSERV 0x0 #define RCVSERV 0x80 /* Receive FIFO Service */ -#define nRCVSERV 0x0 /* Bit maskes for TWIx_XMT_DATA8 */ @@ -4175,81 +3232,51 @@ /* Bit masks for SPORTx_TCR1 */ #define TCKFE 0x4000 /* Clock Falling Edge Select */ -#define nTCKFE 0x0 #define LATFS 0x2000 /* Late Transmit Frame Sync */ -#define nLATFS 0x0 #define LTFS 0x1000 /* Low Transmit Frame Sync Select */ -#define nLTFS 0x0 #define DITFS 0x800 /* Data-Independent Transmit Frame Sync Select */ -#define nDITFS 0x0 #define TFSR 0x400 /* Transmit Frame Sync Required Select */ -#define nTFSR 0x0 #define ITFS 0x200 /* Internal Transmit Frame Sync Select */ -#define nITFS 0x0 #define TLSBIT 0x10 /* Transmit Bit Order */ -#define nTLSBIT 0x0 #define TDTYPE 0xc /* Data Formatting Type Select */ #define ITCLK 0x2 /* Internal Transmit Clock Select */ -#define nITCLK 0x0 #define TSPEN 0x1 /* Transmit Enable */ -#define nTSPEN 0x0 /* Bit masks for SPORTx_TCR2 */ #define TRFST 0x400 /* Left/Right Order */ -#define nTRFST 0x0 #define TSFSE 0x200 /* Transmit Stereo Frame Sync Enable */ -#define nTSFSE 0x0 #define TXSE 0x100 /* TxSEC Enable */ -#define nTXSE 0x0 #define SLEN_T 0x1f /* SPORT Word Length */ /* Bit masks for SPORTx_RCR1 */ #define RCKFE 0x4000 /* Clock Falling Edge Select */ -#define nRCKFE 0x0 #define LARFS 0x2000 /* Late Receive Frame Sync */ -#define nLARFS 0x0 #define LRFS 0x1000 /* Low Receive Frame Sync Select */ -#define nLRFS 0x0 #define RFSR 0x400 /* Receive Frame Sync Required Select */ -#define nRFSR 0x0 #define IRFS 0x200 /* Internal Receive Frame Sync Select */ -#define nIRFS 0x0 #define RLSBIT 0x10 /* Receive Bit Order */ -#define nRLSBIT 0x0 #define RDTYPE 0xc /* Data Formatting Type Select */ #define IRCLK 0x2 /* Internal Receive Clock Select */ -#define nIRCLK 0x0 #define RSPEN 0x1 /* Receive Enable */ -#define nRSPEN 0x0 /* Bit masks for SPORTx_RCR2 */ #define RRFST 0x400 /* Left/Right Order */ -#define nRRFST 0x0 #define RSFSE 0x200 /* Receive Stereo Frame Sync Enable */ -#define nRSFSE 0x0 #define RXSE 0x100 /* RxSEC Enable */ -#define nRXSE 0x0 #define SLEN_R 0x1f /* SPORT Word Length */ /* Bit masks for SPORTx_STAT */ #define TXHRE 0x40 /* Transmit Hold Register Empty */ -#define nTXHRE 0x0 #define TOVF 0x20 /* Sticky Transmit Overflow Status */ -#define nTOVF 0x0 #define TUVF 0x10 /* Sticky Transmit Underflow Status */ -#define nTUVF 0x0 #define TXF 0x8 /* Transmit FIFO Full Status */ -#define nTXF 0x0 #define ROVF 0x4 /* Sticky Receive Overflow Status */ -#define nROVF 0x0 #define RUVF 0x2 /* Sticky Receive Underflow Status */ -#define nRUVF 0x0 #define RXNE 0x1 /* Receive FIFO Not Empty Status */ -#define nRXNE 0x0 /* Bit masks for SPORTx_MCMC1 */ @@ -4260,13 +3287,9 @@ #define MFD 0xf000 /* Multi channel Frame Delay */ #define FSDR 0x80 /* Frame Sync to Data Relationship */ -#define nFSDR 0x0 #define MCMEM 0x10 /* Multi channel Frame Mode Enable */ -#define nMCMEM 0x0 #define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */ -#define nMCDRXPE 0x0 #define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */ -#define nMCDTXPE 0x0 #define MCCRM 0x3 /* 2X Clock Recovery Mode */ /* Bit masks for SPORTx_CHNL */ @@ -4280,115 +3303,59 @@ #define WLS 0x3 /* Word Length Select */ #endif #define STB 0x4 /* Stop Bits */ -#define nSTB 0x0 #define PEN 0x8 /* Parity Enable */ -#define nPEN 0x0 #define EPS 0x10 /* Even Parity Select */ -#define nEPS 0x0 #define STP 0x20 /* Sticky Parity */ -#define nSTP 0x0 #define SB 0x40 /* Set Break */ -#define nSB 0x0 /* Bit masks for UARTx_MCR */ #define XOFF 0x1 /* Transmitter Off */ -#define nXOFF 0x0 #define MRTS 0x2 /* Manual Request To Send */ -#define nMRTS 0x0 #define RFIT 0x4 /* Receive FIFO IRQ Threshold */ -#define nRFIT 0x0 #define RFRT 0x8 /* Receive FIFO RTS Threshold */ -#define nRFRT 0x0 #define LOOP_ENA 0x10 /* Loopback Mode Enable */ -#define nLOOP_ENA 0x0 #define FCPOL 0x20 /* Flow Control Pin Polarity */ -#define nFCPOL 0x0 #define ARTS 0x40 /* Automatic Request To Send */ -#define nARTS 0x0 #define ACTS 0x80 /* Automatic Clear To Send */ -#define nACTS 0x0 /* Bit masks for UARTx_LSR */ #define DR 0x1 /* Data Ready */ -#define nDR 0x0 #define OE 0x2 /* Overrun Error */ -#define nOE 0x0 #define PE 0x4 /* Parity Error */ -#define nPE 0x0 #define FE 0x8 /* Framing Error */ -#define nFE 0x0 #define BI 0x10 /* Break Interrupt */ -#define nBI 0x0 #define THRE 0x20 /* THR Empty */ -#define nTHRE 0x0 #define TEMT 0x40 /* Transmitter Empty */ -#define nTEMT 0x0 #define TFI 0x80 /* Transmission Finished Indicator */ -#define nTFI 0x0 /* Bit masks for UARTx_MSR */ #define SCTS 0x1 /* Sticky CTS */ -#define nSCTS 0x0 #define CTS 0x10 /* Clear To Send */ -#define nCTS 0x0 #define RFCS 0x20 /* Receive FIFO Count Status */ -#define nRFCS 0x0 - -/* Bit masks for UARTx_IER_SET */ - -#define ERBFI_S 0x1 /* Enable Receive Buffer Full Interrupt */ -#define nERBFI_S 0x0 -#define ETBEI_S 0x2 /* Enable Transmit Buffer Empty Interrupt */ -#define nETBEI_S 0x0 -#define ELSI_S 0x4 /* Enable Receive Status Interrupt */ -#define nELSI_S 0x0 -#define EDSSI_S 0x8 /* Enable Modem Status Interrupt */ -#define nEDSSI_S 0x0 -#define EDTPTI_S 0x10 /* Enable DMA Transmit PIRQ Interrupt */ -#define nEDTPTI_S 0x0 -#define ETFI_S 0x20 /* Enable Transmission Finished Interrupt */ -#define nETFI_S 0x0 -#define ERFCI_S 0x40 /* Enable Receive FIFO Count Interrupt */ -#define nERFCI_S 0x0 - -/* Bit masks for UARTx_IER_CLEAR */ - -#define ERBFI_C 0x1 /* Enable Receive Buffer Full Interrupt */ -#define nERBFI_C 0x0 -#define ETBEI_C 0x2 /* Enable Transmit Buffer Empty Interrupt */ -#define nETBEI_C 0x0 -#define ELSI_C 0x4 /* Enable Receive Status Interrupt */ -#define nELSI_C 0x0 -#define EDSSI_C 0x8 /* Enable Modem Status Interrupt */ -#define nEDSSI_C 0x0 -#define EDTPTI_C 0x10 /* Enable DMA Transmit PIRQ Interrupt */ -#define nEDTPTI_C 0x0 -#define ETFI_C 0x20 /* Enable Transmission Finished Interrupt */ -#define nETFI_C 0x0 -#define ERFCI_C 0x40 /* Enable Receive FIFO Count Interrupt */ -#define nERFCI_C 0x0 + +/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */ + +#define ERBFI 0x1 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x2 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x4 /* Enable Receive Status Interrupt */ +#define EDSSI 0x8 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ /* Bit masks for UARTx_GCTL */ #define UCEN 0x1 /* UART Enable */ -#define nUCEN 0x0 #define IREN 0x2 /* IrDA Mode Enable */ -#define nIREN 0x0 #define TPOLC 0x4 /* IrDA TX Polarity Change */ -#define nTPOLC 0x0 #define RPOLC 0x8 /* IrDA RX Polarity Change */ -#define nRPOLC 0x0 #define FPE 0x10 /* Force Parity Error */ -#define nFPE 0x0 #define FFE 0x20 /* Force Framing Error */ -#define nFFE 0x0 #define EDBO 0x40 /* Enable Divide-by-One */ -#define nEDBO 0x0 #define EGLSI 0x80 /* Enable Global LS Interrupt */ -#define nEGLSI 0x0 /* ******************************************* */ diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h index 5a334c813c7..fcc8b4c34c6 100644 --- a/include/asm-blackfin/mach-bf548/dma.h +++ b/include/asm-blackfin/mach-bf548/dma.h @@ -44,7 +44,6 @@ #define CH_UART1_TX 9 #define CH_ATAPI_RX 10 #define CH_ATAPI_TX 11 - #define CH_EPPI0 12 #define CH_EPPI1 13 #define CH_EPPI2 14 @@ -58,6 +57,17 @@ #define CH_SDH 22 #define CH_SPI2 23 -#define MAX_BLACKFIN_DMA_CHANNEL CH_SPI2 +#define CH_MEM_STREAM0_DEST 24 +#define CH_MEM_STREAM0_SRC 25 +#define CH_MEM_STREAM1_DEST 26 +#define CH_MEM_STREAM1_SRC 27 +#define CH_MEM_STREAM2_DEST 28 +#define CH_MEM_STREAM2_SRC 29 +#define CH_MEM_STREAM3_DEST 30 +#define CH_MEM_STREAM3_SRC 31 + +#define MAX_BLACKFIN_DMA_CHANNEL 32 +extern int channel2irq(unsigned int channel); +extern struct dma_register *base_addr[]; #endif diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h new file mode 100644 index 00000000000..45289425ce5 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/gpio.h @@ -0,0 +1,212 @@ +/* + * File: include/asm-blackfin/mach-bf548/gpio.h + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +#define GPIO_PA0 0 +#define GPIO_PA1 1 +#define GPIO_PA2 2 +#define GPIO_PA3 3 +#define GPIO_PA4 4 +#define GPIO_PA5 5 +#define GPIO_PA6 6 +#define GPIO_PA7 7 +#define GPIO_PA8 8 +#define GPIO_PA9 9 +#define GPIO_PA10 10 +#define GPIO_PA11 11 +#define GPIO_PA12 12 +#define GPIO_PA13 13 +#define GPIO_PA14 14 +#define GPIO_PA15 15 +#define GPIO_PB0 16 +#define GPIO_PB1 17 +#define GPIO_PB2 18 +#define GPIO_PB3 19 +#define GPIO_PB4 20 +#define GPIO_PB5 21 +#define GPIO_PB6 22 +#define GPIO_PB7 23 +#define GPIO_PB8 24 +#define GPIO_PB9 25 +#define GPIO_PB10 26 +#define GPIO_PB11 27 +#define GPIO_PB12 28 +#define GPIO_PB13 29 +#define GPIO_PB14 30 +#define GPIO_PB15 31 /* N/A */ +#define GPIO_PC0 32 +#define GPIO_PC1 33 +#define GPIO_PC2 34 +#define GPIO_PC3 35 +#define GPIO_PC4 36 +#define GPIO_PC5 37 +#define GPIO_PC6 38 +#define GPIO_PC7 39 +#define GPIO_PC8 40 +#define GPIO_PC9 41 +#define GPIO_PC10 42 +#define GPIO_PC11 43 +#define GPIO_PC12 44 +#define GPIO_PC13 45 +#define GPIO_PC14 46 /* N/A */ +#define GPIO_PC15 47 /* N/A */ +#define GPIO_PD0 48 +#define GPIO_PD1 49 +#define GPIO_PD2 50 +#define GPIO_PD3 51 +#define GPIO_PD4 52 +#define GPIO_PD5 53 +#define GPIO_PD6 54 +#define GPIO_PD7 55 +#define GPIO_PD8 56 +#define GPIO_PD9 57 +#define GPIO_PD10 58 +#define GPIO_PD11 59 +#define GPIO_PD12 60 +#define GPIO_PD13 61 +#define GPIO_PD14 62 +#define GPIO_PD15 63 +#define GPIO_PE0 64 +#define GPIO_PE1 65 +#define GPIO_PE2 66 +#define GPIO_PE3 67 +#define GPIO_PE4 68 +#define GPIO_PE5 69 +#define GPIO_PE6 70 +#define GPIO_PE7 71 +#define GPIO_PE8 72 +#define GPIO_PE9 73 +#define GPIO_PE10 74 +#define GPIO_PE11 75 +#define GPIO_PE12 76 +#define GPIO_PE13 77 +#define GPIO_PE14 78 +#define GPIO_PE15 79 +#define GPIO_PF0 80 +#define GPIO_PF1 81 +#define GPIO_PF2 82 +#define GPIO_PF3 83 +#define GPIO_PF4 84 +#define GPIO_PF5 85 +#define GPIO_PF6 86 +#define GPIO_PF7 87 +#define GPIO_PF8 88 +#define GPIO_PF9 89 +#define GPIO_PF10 90 +#define GPIO_PF11 91 +#define GPIO_PF12 92 +#define GPIO_PF13 93 +#define GPIO_PF14 94 +#define GPIO_PF15 95 +#define GPIO_PG0 96 +#define GPIO_PG1 97 +#define GPIO_PG2 98 +#define GPIO_PG3 99 +#define GPIO_PG4 100 +#define GPIO_PG5 101 +#define GPIO_PG6 102 +#define GPIO_PG7 103 +#define GPIO_PG8 104 +#define GPIO_PG9 105 +#define GPIO_PG10 106 +#define GPIO_PG11 107 +#define GPIO_PG12 108 +#define GPIO_PG13 109 +#define GPIO_PG14 110 +#define GPIO_PG15 111 +#define GPIO_PH0 112 +#define GPIO_PH1 113 +#define GPIO_PH2 114 +#define GPIO_PH3 115 +#define GPIO_PH4 116 +#define GPIO_PH5 117 +#define GPIO_PH6 118 +#define GPIO_PH7 119 +#define GPIO_PH8 120 +#define GPIO_PH9 121 +#define GPIO_PH10 122 +#define GPIO_PH11 123 +#define GPIO_PH12 124 +#define GPIO_PH13 125 +#define GPIO_PH14 126 /* N/A */ +#define GPIO_PH15 127 /* N/A */ +#define GPIO_PI0 128 +#define GPIO_PI1 129 +#define GPIO_PI2 130 +#define GPIO_PI3 131 +#define GPIO_PI4 132 +#define GPIO_PI5 133 +#define GPIO_PI6 134 +#define GPIO_PI7 135 +#define GPIO_PI8 136 +#define GPIO_PI9 137 +#define GPIO_PI10 138 +#define GPIO_PI11 139 +#define GPIO_PI12 140 +#define GPIO_PI13 141 +#define GPIO_PI14 142 +#define GPIO_PI15 143 +#define GPIO_PJ0 144 +#define GPIO_PJ1 145 +#define GPIO_PJ2 146 +#define GPIO_PJ3 147 +#define GPIO_PJ4 148 +#define GPIO_PJ5 149 +#define GPIO_PJ6 150 +#define GPIO_PJ7 151 +#define GPIO_PJ8 152 +#define GPIO_PJ9 153 +#define GPIO_PJ10 154 +#define GPIO_PJ11 155 +#define GPIO_PJ12 156 +#define GPIO_PJ13 157 +#define GPIO_PJ14 158 +#define GPIO_PJ15 159 + +#define MAX_BLACKFIN_GPIOS 160 + +struct gpio_port_t { + unsigned short port_fer; + unsigned short dummy1; + unsigned short port_data; + unsigned short dummy2; + unsigned short port_set; + unsigned short dummy3; + unsigned short port_clear; + unsigned short dummy4; + unsigned short port_dir_set; + unsigned short dummy5; + unsigned short port_dir_clear; + unsigned short dummy6; + unsigned short port_inen; + unsigned short dummy7; + unsigned int port_mux; +}; + diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h index a7f6703ea1d..93f5db0f465 100644 --- a/include/asm-blackfin/mach-bf548/irq.h +++ b/include/asm-blackfin/mach-bf548/irq.h @@ -51,7 +51,7 @@ Events (highest priority) EMU 0 (lowest priority) IVG15 32 * */ -#define NR_PERI_INTS 32 +#define NR_PERI_INTS (32 * 3) /* The ABSTRACT IRQ definitions */ /** the first seven of the following are fixed, the rest you change if you need to **/ @@ -92,7 +92,7 @@ Events (highest priority) EMU 0 #define IRQ_DMAC1_ERR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ #define IRQ_SPORT2_ERR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ #define IRQ_SPORT3_ERR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ -#define IRQ_MXVR BFIN_IRQ(27) /* SPORT3 Error Interrupt */ +#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */ #define IRQ_SPI1_ERR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */ #define IRQ_SPI2_ERR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */ #define IRQ_UART1_ERR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */ @@ -102,8 +102,8 @@ Events (highest priority) EMU 0 #define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ #define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ #define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ -#define IRQ_EPP1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ -#define IRQ_EPP2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ +#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ +#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ #define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ #define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */ #define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */ @@ -143,14 +143,14 @@ Events (highest priority) EMU 0 #define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */ #define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */ #define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */ -#define IRQ_TMR0 BFIN_IRQ(86) /* Timer 0 Interrupt */ -#define IRQ_TMR1 BFIN_IRQ(87) /* Timer 1 Interrupt */ -#define IRQ_TMR2 BFIN_IRQ(88) /* Timer 2 Interrupt */ -#define IRQ_TMR3 BFIN_IRQ(89) /* Timer 3 Interrupt */ -#define IRQ_TMR4 BFIN_IRQ(90) /* Timer 4 Interrupt */ -#define IRQ_TMR5 BFIN_IRQ(91) /* Timer 5 Interrupt */ -#define IRQ_TMR6 BFIN_IRQ(92) /* Timer 6 Interrupt */ -#define IRQ_TMR7 BFIN_IRQ(93) /* Timer 7 Interrupt */ +#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */ +#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */ +#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */ +#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */ +#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */ +#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */ +#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */ +#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */ #define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */ #define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */ @@ -248,9 +248,9 @@ Events (highest priority) EMU 0 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO -#define NR_IRQS (IRQ_PH15+1) +#define NR_IRQS (IRQ_PE15+1) #else -#define NR_IRQS (IRQ_UART1_ERROR+1) +#define NR_IRQS (SYS_IRQS+1) #endif #define IVG7 7 @@ -263,44 +263,116 @@ Events (highest priority) EMU 0 #define IVG14 14 #define IVG15 15 -/* IAR0 BIT FIELDS*/ -#define IRQ_PLL_WAKEUP_POS 0 -#define IRQ_DMA_ERROR_POS 4 -#define IRQ_ERROR_POS 8 -#define IRQ_RTC_POS 12 -#define IRQ_PPI_POS 16 -#define IRQ_SPORT0_RX_POS 20 -#define IRQ_SPORT0_TX_POS 24 -#define IRQ_SPORT1_RX_POS 28 +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMAC0_ERR_POS 4 +#define IRQ_EPPI0_ERR_POS 8 +#define IRQ_SPORT0_ERR_POS 12 +#define IRQ_SPORT1_ERR_POS 16 +#define IRQ_SPI0_ERR_POS 20 +#define IRQ_UART0_ERR_POS 24 +#define IRQ_RTC_POS 28 -/* IAR1 BIT FIELDS*/ -#define IRQ_SPORT1_TX_POS 0 -#define IRQ_TWI_POS 4 -#define IRQ_SPI_POS 8 -#define IRQ_UART0_RX_POS 12 -#define IRQ_UART0_TX_POS 16 -#define IRQ_UART1_RX_POS 20 -#define IRQ_UART1_TX_POS 24 -#define IRQ_CAN_RX_POS 28 +/* IAR1 BIT FIELDS */ +#define IRQ_EPPI0_POS 0 +#define IRQ_SPORT0_RX_POS 4 +#define IRQ_SPORT0_TX_POS 8 +#define IRQ_SPORT1_RX_POS 12 +#define IRQ_SPORT1_TX_POS 16 +#define IRQ_SPI0_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 -/* IAR2 BIT FIELDS*/ -#define IRQ_CAN_TX_POS 0 -#define IRQ_MAC_RX_POS 4 -#define IRQ_MAC_TX_POS 8 -#define IRQ_TMR0_POS 12 -#define IRQ_TMR1_POS 16 -#define IRQ_TMR2_POS 20 -#define IRQ_TMR3_POS 24 -#define IRQ_TMR4_POS 28 +/* IAR2 BIT FIELDS */ +#define IRQ_TIMER8_POS 0 +#define IRQ_TIMER9_POS 4 +#define IRQ_TIMER10_POS 8 +#define IRQ_PINT0_POS 12 +#define IRQ_PINT1_POS 16 +#define IRQ_MDMAS0_POS 20 +#define IRQ_MDMAS1_POS 24 +#define IRQ_WATCHDOG_POS 28 -/* IAR3 BIT FIELDS*/ -#define IRQ_TMR5_POS 0 -#define IRQ_TMR6_POS 4 -#define IRQ_TMR7_POS 8 -#define IRQ_PROG_INTA_POS 12 -#define IRQ_PORTG_INTB_POS 16 -#define IRQ_MEM_DMA0_POS 20 -#define IRQ_MEM_DMA1_POS 24 -#define IRQ_WATCH_POS 28 +/* IAR3 BIT FIELDS */ +#define IRQ_DMAC1_ERR_POS 0 +#define IRQ_SPORT2_ERR_POS 4 +#define IRQ_SPORT3_ERR_POS 8 +#define IRQ_MXVR_DATA_POS 12 +#define IRQ_SPI1_ERR_POS 16 +#define IRQ_SPI2_ERR_POS 20 +#define IRQ_UART1_ERR_POS 24 +#define IRQ_UART2_ERR_POS 28 -#endif /* _BF537_IRQ_H_ */ +/* IAR4 BIT FILEDS */ +#define IRQ_CAN0_ERR_POS 0 +#define IRQ_SPORT2_RX_POS 4 +#define IRQ_SPORT2_TX_POS 8 +#define IRQ_SPORT3_RX_POS 12 +#define IRQ_SPORT3_TX_POS 16 +#define IRQ_EPPI1_POS 20 +#define IRQ_EPPI2_POS 24 +#define IRQ_SPI1_POS 28 + +/* IAR5 BIT FIELDS */ +#define IRQ_SPI2_POS 0 +#define IRQ_UART1_RX_POS 4 +#define IRQ_UART1_TX_POS 8 +#define IRQ_ATAPI_RX_POS 12 +#define IRQ_ATAPI_TX_POS 16 +#define IRQ_TWI0_POS 20 +#define IRQ_TWI1_POS 24 +#define IRQ_CAN0_RX_POS 28 + +/* IAR6 BIT FIELDS */ +#define IRQ_CAN0_TX_POS 0 +#define IRQ_MDMAS2_POS 4 +#define IRQ_MDMAS3_POS 8 +#define IRQ_MXVR_ERR_POS 12 +#define IRQ_MXVR_MSG_POS 16 +#define IRQ_MXVR_PKT_POS 20 +#define IRQ_EPPI1_ERR_POS 24 +#define IRQ_EPPI2_ERR_POS 28 + +/* IAR7 BIT FIELDS */ +#define IRQ_UART3_ERR_POS 0 +#define IRQ_HOST_ERR_POS 4 +#define IRQ_PIXC_ERR_POS 12 +#define IRQ_NFC_ERR_POS 16 +#define IRQ_ATAPI_ERR_POS 20 +#define IRQ_CAN1_ERR_POS 24 +#define IRQ_HS_DMA_ERR_POS 28 + +/* IAR8 BIT FIELDS */ +#define IRQ_PIXC_IN0_POS 0 +#define IRQ_PIXC_IN1_POS 4 +#define IRQ_PIXC_OUT_POS 8 +#define IRQ_SDH_POS 12 +#define IRQ_CNT_POS 16 +#define IRQ_KEY_POS 20 +#define IRQ_CAN1_RX_POS 24 +#define IRQ_CAN1_TX_POS 28 + +/* IAR9 BIT FIELDS */ +#define IRQ_SDH_MASK0_POS 0 +#define IRQ_SDH_MASK1_POS 4 +#define IRQ_USB_INT0_POS 12 +#define IRQ_USB_INT1_POS 16 +#define IRQ_USB_INT2_POS 20 +#define IRQ_USB_DMA_POS 24 +#define IRQ_OTPSEC_POS 28 + +/* IAR10 BIT FIELDS */ +#define IRQ_TIMER0_POS 24 +#define IRQ_TIMER1_POS 28 + +/* IAR11 BIT FIELDS */ +#define IRQ_TIMER2_POS 0 +#define IRQ_TIMER3_POS 4 +#define IRQ_TIMER4_POS 8 +#define IRQ_TIMER5_POS 12 +#define IRQ_TIMER6_POS 16 +#define IRQ_TIMER7_POS 20 +#define IRQ_PINT2_POS 24 +#define IRQ_PINT3_POS 28 + +#endif /* _BF548_IRQ_H_ */ diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h index 21d982003e7..766334b7d8a 100644 --- a/include/asm-blackfin/mach-bf561/dma.h +++ b/include/asm-blackfin/mach-bf561/dma.h @@ -32,4 +32,7 @@ #define CH_IMEM_STREAM1_SRC 34 #define CH_IMEM_STREAM1_DEST 35 +extern int channel2irq(unsigned int channel); +extern struct dma_register *base_addr[]; + #endif |