diff options
27 files changed, 283 insertions, 280 deletions
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index c750f9f2e76..b6a3cbf7e84 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -102,31 +102,28 @@ pci_save_state -------------- Usage: - pci_save_state(dev, buffer); + pci_save_state(struct pci_dev *dev); Description: - Save first 64 bytes of PCI config space. Buffer must be allocated by - caller. + Save first 64 bytes of PCI config space, along with any additional + PCI-Express or PCI-X information. pci_restore_state ----------------- Usage: - pci_restore_state(dev, buffer); + pci_restore_state(struct pci_dev *dev); Description: - Restore previously saved config space. (First 64 bytes only); - - If buffer is NULL, then restore what information we know about the - device from bootup: BARs and interrupt line. + Restore previously saved config space. pci_set_power_state ------------------- Usage: - pci_set_power_state(dev, state); + pci_set_power_state(struct pci_dev *dev, pci_power_t state); Description: Transition device to low power state using PCI PM Capabilities @@ -142,7 +139,7 @@ pci_enable_wake --------------- Usage: - pci_enable_wake(dev, state, enable); + pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); Description: Enable device to generate PME# during low power state using PCI PM diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 1bb06937214..94843666538 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -193,6 +193,14 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { }, { .callback = set_bf_sort, + .ident = "Dell PowerEdge R900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"), + }, + }, + { + .callback = set_bf_sort, .ident = "HP ProLiant BL20p G3", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 8af549e9573..993f3538149 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -167,7 +167,7 @@ static int __kprobes swap_instruction(void *aref) * shall not cross any page boundaries (vmalloc area!) when writing * the new instruction. */ - addr = (u32 *)ALIGN((unsigned long)args->ptr, 4); + addr = (u32 *)((unsigned long)args->ptr & -4UL); if ((unsigned long)args->ptr & 2) instr = ((*addr) & 0xffff0000) | args->new; else diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8f1fd017679..ca2e4f830c3 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -103,8 +103,10 @@ config BLK_DEV_IDE_SATA ---help--- There are two drivers for Serial ATA controllers. - The main driver, "libata", exists inside the SCSI subsystem - and supports most modern SATA controllers. + The main driver, "libata", uses the SCSI subsystem + and supports most modern SATA controllers. In order to use it + you may take a look at "Serial ATA (prod) and Parallel ATA + (experimental) drivers". The IDE driver (which you are currently configuring) supports a few first-generation SATA controllers. diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c193553f6fe..0e0280076fc 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -519,21 +519,24 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && hwif->err_stops_fifo == 0) try_to_flush_leftover_data(drive); + if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { + ide_kill_rq(drive, rq); + return ide_stopped; + } + if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) - /* force an abort */ - hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG); + rq->errors |= ERROR_RESET; - if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) - ide_kill_rq(drive, rq); - else { - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); - } - if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) - drive->special.b.recalibrate = 1; + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { ++rq->errors; + return ide_do_reset(drive); } + + if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) + drive->special.b.recalibrate = 1; + + ++rq->errors; + return ide_stopped; } @@ -1025,6 +1028,13 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (!drive->special.all) { ide_driver_t *drv; + /* + * We reset the drive so we need to issue a SETFEATURES. + * Do it _after_ do_special() restored device parameters. + */ + if (drive->current_speed == 0xff) + ide_config_drive_speed(drive, drive->desired_speed); + if (rq->cmd_type == REQ_TYPE_ATA_CMD || rq->cmd_type == REQ_TYPE_ATA_TASK || rq->cmd_type == REQ_TYPE_ATA_TASKFILE) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bd513f5a232..1ee53a551c3 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -583,8 +583,12 @@ u8 eighty_ninty_three (ide_drive_t *drive) if(!(drive->id->hw_config & 0x4000)) return 0; #endif /* CONFIG_IDEDMA_IVB */ - if (!(drive->id->hw_config & 0x2000)) - return 0; + /* + * FIXME: + * - change master/slave IDENTIFY order + * - force bit13 (80c cable present) check + * (unless the slave device is pre-ATA3) + */ return 1; } @@ -1090,6 +1094,9 @@ static void pre_reset(ide_drive_t *drive) if (HWIF(drive)->pre_reset != NULL) HWIF(drive)->pre_reset(drive); + if (drive->current_speed != 0xff) + drive->desired_speed = drive->current_speed; + drive->current_speed = 0xff; } /* diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 695610f0e3e..a6f098fda88 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1124,17 +1124,40 @@ static int set_io_32bit(ide_drive_t *drive, int arg) static int set_using_dma (ide_drive_t *drive, int arg) { #ifdef CONFIG_BLK_DEV_IDEDMA + ide_hwif_t *hwif = drive->hwif; + int err = -EPERM; + if (!drive->id || !(drive->id->capability & 1)) - return -EPERM; - if (HWIF(drive)->ide_dma_check == NULL) - return -EPERM; + goto out; + + if (hwif->ide_dma_check == NULL) + goto out; + + err = -EBUSY; + if (ide_spin_wait_hwgroup(drive)) + goto out; + /* + * set ->busy flag, unlock and let it ride + */ + hwif->hwgroup->busy = 1; + spin_unlock_irq(&ide_lock); + + err = 0; + if (arg) { - if (ide_set_dma(drive)) - return -EIO; - if (HWIF(drive)->ide_dma_on(drive)) return -EIO; + if (ide_set_dma(drive) || hwif->ide_dma_on(drive)) + err = -EIO; } else ide_dma_off(drive); - return 0; + + /* + * lock, clear ->busy flag and unlock before leaving + */ + spin_lock_irq(&ide_lock); + hwif->hwgroup->busy = 0; + spin_unlock_irq(&ide_lock); +out: + return err; #else return -EPERM; #endif diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 6ceb25bc5a7..ace98929cc3 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -255,7 +255,7 @@ static int config_chipset_for_dma(ide_drive_t *drive) printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); } - if (drive->media != ide_disk) + if (drive->media != ide_disk && drive->media != ide_cdrom) return 0; if (id->capability & 4) { @@ -545,6 +545,7 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->drives[0].autotune = hwif->drives[1].autotune = 1; + hwif->atapi_dma = 1; hwif->ultra_mask = 0x7f; hwif->mwdma_mask = 0x07; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 0be5a0b3072..df383645e36 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -93,7 +93,7 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, if (!dev->irq && dev->pin) { printk(KERN_WARNING "%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n", - __FUNCTION__, dev->device, dev->vendor); + __FUNCTION__, dev->vendor, dev->device); } if (pcie_port_device_register(dev)) { pci_disable_device(dev); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7f94fc098cd..65d6f23ead4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -963,6 +963,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it * becomes necessary to do this tweak in two steps -- I've chosen the Host * bridge as trigger. + * + * Note that we used to unhide the SMBus that way on Toshiba laptops + * (Satellite A40 and Tecra M2) but then found that the thermal management + * was done by SMM code, which could cause unsynchronized concurrent + * accesses to the SMBus registers, with potentially bad effects. Thus you + * should be very careful when adding new entries: if SMM is accessing the + * Intel SMBus, this is a very good reason to leave it hidden. */ static int asus_hides_smbus; @@ -1040,17 +1047,6 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x099c: /* HP Compaq nx6110 */ asus_hides_smbus = 1; } - } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) { - if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) - switch(dev->subsystem_device) { - case 0x0001: /* Toshiba Satellite A40 */ - asus_hides_smbus = 1; - } - else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) - switch(dev->subsystem_device) { - case 0x0001: /* Toshiba Tecra M2 */ - asus_hides_smbus = 1; - } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) switch(dev->subsystem_device) { diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index ab782bb46ac..e810e4a44ed 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -65,7 +65,7 @@ static const u8 DASD_DIAG_CMS1[] = { 0xc3, 0xd4, 0xe2, 0xf1 };/* EBCDIC CMS1 */ * resulting condition code and DIAG return code. */ static inline int dia250(void *iob, int cmd) { - register unsigned long reg0 asm ("0") = (unsigned long) iob; + register unsigned long reg2 asm ("2") = (unsigned long) iob; typedef union { struct dasd_diag_init_io init_io; struct dasd_diag_rw_io rw_io; @@ -74,15 +74,15 @@ static inline int dia250(void *iob, int cmd) rc = 3; asm volatile( - " diag 0,%2,0x250\n" + " diag 2,%2,0x250\n" "0: ipm %0\n" " srl %0,28\n" - " or %0,1\n" + " or %0,3\n" "1:\n" EX_TABLE(0b,1b) : "+d" (rc), "=m" (*(addr_type *) iob) - : "d" (cmd), "d" (reg0), "m" (*(addr_type *) iob) - : "1", "cc"); + : "d" (cmd), "d" (reg2), "m" (*(addr_type *) iob) + : "3", "cc"); return rc; } diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c index 6b1caea622e..25d99bd2808 100644 --- a/drivers/s390/cio/device_status.c +++ b/drivers/s390/cio/device_status.c @@ -263,7 +263,11 @@ ccw_device_accumulate_irb(struct ccw_device *cdev, struct irb *irb) cdev_irb->scsw.cpa = irb->scsw.cpa; /* Accumulate device status, but not the device busy flag. */ cdev_irb->scsw.dstat &= ~DEV_STAT_BUSY; - cdev_irb->scsw.dstat |= irb->scsw.dstat; + /* dstat is not always valid. */ + if (irb->scsw.stctl & + (SCSW_STCTL_PRIM_STATUS | SCSW_STCTL_SEC_STATUS + | SCSW_STCTL_INTER_STATUS | SCSW_STCTL_ALERT_STATUS)) + cdev_irb->scsw.dstat |= irb->scsw.dstat; /* Accumulate subchannel status. */ cdev_irb->scsw.cstat |= irb->scsw.cstat; /* Copy residual count if it is valid. */ diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 181b51772b1..bf37cdf43fa 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -505,6 +505,9 @@ static int ap_device_remove(struct device *dev) spin_lock_bh(&ap_device_lock); list_del_init(&ap_dev->list); spin_unlock_bh(&ap_device_lock); + spin_lock_bh(&ap_dev->lock); + atomic_sub(ap_dev->queue_count, &ap_poll_requests); + spin_unlock_bh(&ap_dev->lock); return 0; } @@ -757,10 +760,16 @@ static void ap_scan_bus(struct work_struct *unused) (void *)(unsigned long)qid, __ap_scan_bus); rc = ap_query_queue(qid, &queue_depth, &device_type); - if (dev && rc) { - put_device(dev); - device_unregister(dev); - continue; + if (dev) { + ap_dev = to_ap_dev(dev); + spin_lock_bh(&ap_dev->lock); + if (rc || ap_dev->unregistered) { + spin_unlock_bh(&ap_dev->lock); + put_device(dev); + device_unregister(dev); + continue; + } else + spin_unlock_bh(&ap_dev->lock); } if (dev) { put_device(dev); @@ -861,6 +870,7 @@ static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags) case AP_RESPONSE_NO_PENDING_REPLY: if (status.queue_empty) { /* The card shouldn't forget requests but who knows. */ + atomic_sub(ap_dev->queue_count, &ap_poll_requests); ap_dev->queue_count = 0; list_splice_init(&ap_dev->pendingq, &ap_dev->requestq); ap_dev->requestq_count += ap_dev->pendingq_count; @@ -994,7 +1004,7 @@ void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg) ap_dev->unregistered = 1; } else { ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV)); - rc = 0; + rc = -ENODEV; } spin_unlock_bh(&ap_dev->lock); if (rc == -ENODEV) @@ -1044,18 +1054,12 @@ static void ap_poll_timeout(unsigned long unused) */ static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags) { - int rc; - spin_lock(&ap_dev->lock); if (!ap_dev->unregistered) { - rc = ap_poll_queue(ap_dev, flags); - if (rc) + if (ap_poll_queue(ap_dev, flags)) ap_dev->unregistered = 1; - } else - rc = 0; + } spin_unlock(&ap_dev->lock); - if (rc) - device_unregister(&ap_dev->device); return 0; } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 0e5c646cb4f..f08ec85a6d6 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -30,7 +30,8 @@ static const struct usb_device_id usb_quirk_list[] = { /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, - + /* Seiko Epson Corp - Perfection 1670 */ + { USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Elsa MicroLink 56k (V.250) */ { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 8f9a2b61542..b394e63894d 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -296,6 +296,15 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req) /*-------------------------------------------------------------------------*/ +/* + * dma-coherent memory allocation (for dma-capable endpoints) + * + * NOTE: the dma_*_coherent() API calls suck. Most implementations are + * (a) page-oriented, so small buffers lose big; and (b) asymmetric with + * respect to calls with irqs disabled: alloc is safe, free is not. + * We currently work around (b), but not (a). + */ + static void * omap_alloc_buffer( struct usb_ep *_ep, @@ -307,6 +316,9 @@ omap_alloc_buffer( void *retval; struct omap_ep *ep; + if (!_ep) + return NULL; + ep = container_of(_ep, struct omap_ep, ep); if (use_dma && ep->has_dma) { static int warned; @@ -326,6 +338,35 @@ omap_alloc_buffer( return retval; } +static DEFINE_SPINLOCK(buflock); +static LIST_HEAD(buffers); + +struct free_record { + struct list_head list; + struct device *dev; + unsigned bytes; + dma_addr_t dma; +}; + +static void do_free(unsigned long ignored) +{ + spin_lock_irq(&buflock); + while (!list_empty(&buffers)) { + struct free_record *buf; + + buf = list_entry(buffers.next, struct free_record, list); + list_del(&buf->list); + spin_unlock_irq(&buflock); + + dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma); + + spin_lock_irq(&buflock); + } + spin_unlock_irq(&buflock); +} + +static DECLARE_TASKLET(deferred_free, do_free, 0); + static void omap_free_buffer( struct usb_ep *_ep, void *buf, @@ -333,13 +374,29 @@ static void omap_free_buffer( unsigned bytes ) { - struct omap_ep *ep; + if (!_ep) { + WARN_ON(1); + return; + } - ep = container_of(_ep, struct omap_ep, ep); - if (use_dma && _ep && ep->has_dma) - dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma); - else - kfree (buf); + /* free memory into the right allocator */ + if (dma != DMA_ADDR_INVALID) { + struct omap_ep *ep; + struct free_record *rec = buf; + unsigned long flags; + + ep = container_of(_ep, struct omap_ep, ep); + + rec->dev = ep->udc->gadget.dev.parent; + rec->bytes = bytes; + rec->dma = dma; + + spin_lock_irqsave(&buflock, flags); + list_add_tail(&rec->list, &buffers); + tasklet_schedule(&deferred_free); + spin_unlock_irqrestore(&buflock, flags); + } else + kfree(buf); } /*-------------------------------------------------------------------------*/ @@ -1691,12 +1748,38 @@ ep0out_status_stage: udc->ep0_pending = 0; break; case USB_REQ_GET_STATUS: + /* USB_ENDPOINT_HALT status? */ + if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) + goto intf_status; + + /* ep0 never stalls */ + if (!(w_index & 0xf)) + goto zero_status; + + /* only active endpoints count */ + ep = &udc->ep[w_index & 0xf]; + if (w_index & USB_DIR_IN) + ep += 16; + if (!ep->desc) + goto do_stall; + + /* iso never stalls */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + goto zero_status; + + /* FIXME don't assume non-halted endpoints!! */ + ERR("%s status, can't report\n", ep->ep.name); + goto do_stall; + +intf_status: /* return interface status. if we were pedantic, * we'd detect non-existent interfaces, and stall. */ if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) goto delegate; + +zero_status: /* return two zero bytes */ UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; UDC_DATA_REG = 0; @@ -2068,7 +2151,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev) /*-------------------------------------------------------------------------*/ -static inline int machine_needs_vbus_session(void) +static inline int machine_without_vbus_sense(void) { return (machine_is_omap_innovator() || machine_is_omap_osk() @@ -2156,7 +2239,7 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) /* boards that don't have VBUS sensing can't autogate 48MHz; * can't enter deep sleep while a gadget driver is active. */ - if (machine_needs_vbus_session()) + if (machine_without_vbus_sense()) omap_vbus_session(&udc->gadget, 1); done: @@ -2179,7 +2262,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) if (udc->dc_clk != NULL) omap_udc_enable_clock(1); - if (machine_needs_vbus_session()) + if (machine_without_vbus_sense()) omap_vbus_session(&udc->gadget, 0); if (udc->transceiver) @@ -2822,7 +2905,7 @@ static int __init omap_udc_probe(struct platform_device *pdev) hmc = HMC_1510; type = "(unknown)"; - if (machine_is_omap_innovator() || machine_is_sx1()) { + if (machine_without_vbus_sense()) { /* just set up software VBUS detect, and then * later rig it so we always report VBUS. * FIXME without really sensing VBUS, we can't diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 8d24d3dc0a6..1497371583b 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -145,7 +145,8 @@ static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space) return out - buf; } -static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) +static int uhci_show_qh(struct uhci_hcd *uhci, + struct uhci_qh *qh, char *buf, int len, int space) { char *out = buf; int i, nurbs; @@ -190,6 +191,9 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) if (list_empty(&qh->queue)) { out += sprintf(out, "%*s queue is empty\n", space, ""); + if (qh == uhci->skel_async_qh) + out += uhci_show_td(uhci->term_td, out, + len - (out - buf), 0); } else { struct urb_priv *urbp = list_entry(qh->queue.next, struct urb_priv, node); @@ -343,6 +347,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) struct list_head *tmp, *head; int nframes, nerrs; __le32 link; + __le32 fsbr_link; static const char * const qh_names[] = { "unlink", "iso", "int128", "int64", "int32", "int16", @@ -424,21 +429,22 @@ check_link: out += sprintf(out, "Skeleton QHs\n"); + fsbr_link = 0; for (i = 0; i < UHCI_NUM_SKELQH; ++i) { int cnt = 0; - __le32 fsbr_link = 0; qh = uhci->skelqh[i]; out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \ - out += uhci_show_qh(qh, out, len - (out - buf), 4); + out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4); /* Last QH is the Terminating QH, it's different */ if (i == SKEL_TERM) { if (qh_element(qh) != LINK_TO_TD(uhci->term_td)) out += sprintf(out, " skel_term_qh element is not set to term_td!\n"); - if (link == LINK_TO_QH(uhci->skel_term_qh)) - goto check_qh_link; - continue; + link = fsbr_link; + if (!link) + link = LINK_TO_QH(uhci->skel_term_qh); + goto check_qh_link; } head = &qh->node; @@ -448,7 +454,7 @@ check_link: qh = list_entry(tmp, struct uhci_qh, node); tmp = tmp->next; if (++cnt <= 10) - out += uhci_show_qh(qh, out, + out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4); if (!fsbr_link && qh->skel >= SKEL_FSBR) fsbr_link = LINK_TO_QH(qh); @@ -463,8 +469,6 @@ check_link: link = LINK_TO_QH(uhci->skel_async_qh); else if (!uhci->fsbr_is_on) ; - else if (fsbr_link) - link = fsbr_link; else link = LINK_TO_QH(uhci->skel_term_qh); check_qh_link: @@ -573,8 +577,8 @@ static const struct file_operations uhci_debug_operations = { static inline void lprintk(char *buf) {} -static inline int uhci_show_qh(struct uhci_qh *qh, char *buf, - int len, int space) +static inline int uhci_show_qh(struct uhci_hcd *uhci, + struct uhci_qh *qh, char *buf, int len, int space) { return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 44da4334f1d..d22da26ff16 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -632,7 +632,8 @@ static int uhci_start(struct usb_hcd *hcd) */ for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i) uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh); - uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM; + uhci->skel_async_qh->link = UHCI_PTR_TERM; + uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh); /* This dummy TD is to work around a bug in Intel PIIX controllers */ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) | diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index f4ebdb3e488..19a0cc02b9a 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -45,43 +45,27 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci) */ static void uhci_fsbr_on(struct uhci_hcd *uhci) { - struct uhci_qh *fsbr_qh, *lqh, *tqh; + struct uhci_qh *lqh; + /* The terminating skeleton QH always points back to the first + * FSBR QH. Make the last async QH point to the terminating + * skeleton QH. */ uhci->fsbr_is_on = 1; lqh = list_entry(uhci->skel_async_qh->node.prev, struct uhci_qh, node); - - /* Find the first FSBR QH. Linear search through the list is - * acceptable because normally FSBR gets turned on as soon as - * one QH needs it. */ - fsbr_qh = NULL; - list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) { - if (tqh->skel < SKEL_FSBR) - break; - fsbr_qh = tqh; - } - - /* No FSBR QH means we must insert the terminating skeleton QH */ - if (!fsbr_qh) { - uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh); - wmb(); - lqh->link = uhci->skel_term_qh->link; - - /* Otherwise loop the last QH to the first FSBR QH */ - } else - lqh->link = LINK_TO_QH(fsbr_qh); + lqh->link = LINK_TO_QH(uhci->skel_term_qh); } static void uhci_fsbr_off(struct uhci_hcd *uhci) { struct uhci_qh *lqh; + /* Remove the link from the last async QH to the terminating + * skeleton QH. */ uhci->fsbr_is_on = 0; lqh = list_entry(uhci->skel_async_qh->node.prev, struct uhci_qh, node); - - /* End the async list normally and unlink the terminating QH */ - lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM; + lqh->link = UHCI_PTR_TERM; } static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb) @@ -464,9 +448,8 @@ static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) */ static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh) { - struct uhci_qh *pqh, *lqh; + struct uhci_qh *pqh; __le32 link_to_new_qh; - __le32 *extra_link = &link_to_new_qh; /* Find the predecessor QH for our new one and insert it in the list. * The list of QHs is expected to be short, so linear search won't @@ -476,31 +459,17 @@ static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh) break; } list_add(&qh->node, &pqh->node); - qh->link = pqh->link; - - link_to_new_qh = LINK_TO_QH(qh); - - /* If this is now the first FSBR QH, take special action */ - if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR && - qh->skel >= SKEL_FSBR) { - lqh = list_entry(uhci->skel_async_qh->node.prev, - struct uhci_qh, node); - - /* If the new QH is also the last one, we must unlink - * the terminating skeleton QH and make the new QH point - * back to itself. */ - if (qh == lqh) { - qh->link = link_to_new_qh; - extra_link = &uhci->skel_term_qh->link; - - /* Otherwise the last QH must point to the new QH */ - } else - extra_link = &lqh->link; - } /* Link it into the schedule */ + qh->link = pqh->link; wmb(); - *extra_link = pqh->link = link_to_new_qh; + link_to_new_qh = LINK_TO_QH(qh); + pqh->link = link_to_new_qh; + + /* If this is now the first FSBR QH, link the terminating skeleton + * QH to it. */ + if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR) + uhci->skel_term_qh->link = link_to_new_qh; } /* @@ -561,31 +530,16 @@ static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) */ static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh) { - struct uhci_qh *pqh, *lqh; + struct uhci_qh *pqh; __le32 link_to_next_qh = qh->link; pqh = list_entry(qh->node.prev, struct uhci_qh, node); - - /* If this is the first FSBQ QH, take special action */ - if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR && - qh->skel >= SKEL_FSBR) { - lqh = list_entry(uhci->skel_async_qh->node.prev, - struct uhci_qh, node); - - /* If this QH is also the last one, we must link in - * the terminating skeleton QH. */ - if (qh == lqh) { - link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh); - uhci->skel_term_qh->link = link_to_next_qh; - wmb(); - qh->link = link_to_next_qh; - - /* Otherwise the last QH must point to the new first FSBR QH */ - } else - lqh->link = link_to_next_qh; - } - pqh->link = link_to_next_qh; + + /* If this was the old first FSBR QH, link the terminating skeleton + * QH to the next (new first FSBR) QH. */ + if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR) + uhci->skel_term_qh->link = link_to_next_qh; mb(); } @@ -1217,7 +1171,7 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) if (debug > 1 && errbuf) { /* Print the chain for debugging */ - uhci_show_qh(urbp->qh, errbuf, + uhci_show_qh(uhci, urbp->qh, errbuf, ERRBUF_LEN, 0); lprintk(errbuf); } diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 7538c64a509..39a49836259 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -18,7 +18,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ - { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */ { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */ { }, }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1633a0fd48e..8ff9d54b21e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -879,6 +879,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) break; case FT232BM: /* FT232BM chip */ case FT2232C: /* FT2232C chip */ + case FT232RL: if (baud <= 3000000) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { @@ -1021,9 +1022,12 @@ static void ftdi_determine_type(struct usb_serial_port *port) /* (It might be a BM because of the iSerialNumber bug, * but it will still work as an AM device.) */ priv->chip_type = FT8U232AM; - } else { + } else if (version < 0x600) { /* Assume its an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; + } else { + /* Assume its an FT232R */ + priv->chip_type = FT232RL; } info("Detected %s", ftdi_chip_name[priv->chip_type]); } diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 53baeec8f26..4f8282ad772 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -20,13 +20,14 @@ #include <linux/usb/serial.h> #include <asm/uaccess.h> -static int generic_probe(struct usb_interface *interface, - const struct usb_device_id *id); - static int debug; #ifdef CONFIG_USB_SERIAL_GENERIC + +static int generic_probe(struct usb_interface *interface, + const struct usb_device_id *id); + static __u16 vendor = 0x05f9; static __u16 product = 0xffff; diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h index 8ada4c5c5d7..6a82d39dc49 100644 --- a/fs/9p/v9fs_vfs.h +++ b/fs/9p/v9fs_vfs.h @@ -40,7 +40,6 @@ extern struct file_system_type v9fs_fs_type; extern const struct address_space_operations v9fs_addr_operations; extern const struct file_operations v9fs_file_operations; -extern const struct file_operations v9fs_cached_file_operations; extern const struct file_operations v9fs_dir_operations; extern struct dentry_operations v9fs_dentry_operations; extern struct dentry_operations v9fs_cached_dentry_operations; diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index 653dfa5b253..c7b67725384 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -42,6 +42,8 @@ #include "v9fs_vfs.h" #include "fid.h" +static const struct file_operations v9fs_cached_file_operations; + /** * v9fs_file_open - open a file (or directory) * @inode: inode to be opened @@ -245,7 +247,7 @@ v9fs_file_write(struct file *filp, const char __user * data, return total; } -const struct file_operations v9fs_cached_file_operations = { +static const struct file_operations v9fs_cached_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, diff --git a/include/asm-s390/checksum.h b/include/asm-s390/checksum.h index 0a3cd7ec845..d5a8e7c1477 100644 --- a/include/asm-s390/checksum.h +++ b/include/asm-s390/checksum.h @@ -121,50 +121,21 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { -#ifndef __s390x__ - asm volatile( - " alr %0,%1\n" /* sum += saddr */ - " brc 12,0f\n" - " ahi %0,1\n" /* add carry */ - "0:" - : "+&d" (sum) : "d" (saddr) : "cc"); - asm volatile( - " alr %0,%1\n" /* sum += daddr */ - " brc 12,1f\n" - " ahi %0,1\n" /* add carry */ - "1:" - : "+&d" (sum) : "d" (daddr) : "cc"); - asm volatile( - " alr %0,%1\n" /* sum += len + proto */ - " brc 12,2f\n" - " ahi %0,1\n" /* add carry */ - "2:" - : "+&d" (sum) - : "d" (len + proto) - : "cc"); -#else /* __s390x__ */ - asm volatile( - " lgfr %0,%0\n" - " algr %0,%1\n" /* sum += saddr */ - " brc 12,0f\n" - " aghi %0,1\n" /* add carry */ - "0: algr %0,%2\n" /* sum += daddr */ - " brc 12,1f\n" - " aghi %0,1\n" /* add carry */ - "1: algfr %0,%3\n" /* sum += len + proto */ - " brc 12,2f\n" - " aghi %0,1\n" /* add carry */ - "2: srlg 0,%0,32\n" - " alr %0,0\n" /* fold to 32 bits */ - " brc 12,3f\n" - " ahi %0,1\n" /* add carry */ - "3: llgfr %0,%0" - : "+&d" (sum) - : "d" (saddr), "d" (daddr), - "d" (len + proto) - : "cc", "0"); -#endif /* __s390x__ */ - return sum; + __u32 csum = (__force __u32)sum; + + csum += (__force __u32)saddr; + if (csum < (__force __u32)saddr) + csum++; + + csum += (__force __u32)daddr; + if (csum < (__force __u32)daddr) + csum++; + + csum += len + proto; + if (csum < len + proto) + csum++; + + return (__force __wsum)csum; } /* diff --git a/include/linux/compiler.h b/include/linux/compiler.h index aca66984aaf..3b6949b4174 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -15,8 +15,8 @@ # define __acquire(x) __context__(x,1) # define __release(x) __context__(x,-1) # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) -extern void __chk_user_ptr(void __user *); -extern void __chk_io_ptr(void __iomem *); +extern void __chk_user_ptr(const void __user *); +extern void __chk_io_ptr(const void __iomem *); #else # define __user # define __kernel diff --git a/include/linux/ide.h b/include/linux/ide.h index 34f2676b3c6..58564a19986 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -615,6 +615,7 @@ typedef struct ide_drive_s { u8 init_speed; /* transfer rate set at boot */ u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */ u8 current_speed; /* current transfer rate set */ + u8 desired_speed; /* desired transfer rate set */ u8 dn; /* now wide spread use */ u8 wcache; /* status of write cache */ u8 acoustic; /* acoustic management */ diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 67932ea78c1..76212b2a99d 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -274,72 +274,3 @@ void clockevents_notify(unsigned long reason, void *arg) } EXPORT_SYMBOL_GPL(clockevents_notify); -#ifdef CONFIG_SYSFS - -/** - * clockevents_show_registered - sysfs interface for listing clockevents - * @dev: unused - * @buf: char buffer to be filled with clock events list - * - * Provides sysfs interface for listing registered clock event devices - */ -static ssize_t clockevents_show_registered(struct sys_device *dev, char *buf) -{ - struct list_head *tmp; - char *p = buf; - int cpu; - - spin_lock(&clockevents_lock); - - list_for_each(tmp, &clockevent_devices) { - struct clock_event_device *ce; - - ce = list_entry(tmp, struct clock_event_device, list); - p += sprintf(p, "%-20s F:%04x M:%d", ce->name, - ce->features, ce->mode); - p += sprintf(p, " C:"); - if (!cpus_equal(ce->cpumask, cpu_possible_map)) { - for_each_cpu_mask(cpu, ce->cpumask) - p += sprintf(p, " %d", cpu); - } else { - /* - * FIXME: Add the cpu which is handling this sucker - */ - } - p += sprintf(p, "\n"); - } - - spin_unlock(&clockevents_lock); - - return p - buf; -} - -/* - * Sysfs setup bits: - */ -static SYSDEV_ATTR(registered, 0600, - clockevents_show_registered, NULL); - -static struct sysdev_class clockevents_sysclass = { - set_kset_name("clockevents"), -}; - -static struct sys_device clockevents_sys_device = { - .id = 0, - .cls = &clockevents_sysclass, -}; - -static int __init clockevents_sysfs_init(void) -{ - int error = sysdev_class_register(&clockevents_sysclass); - - if (!error) - error = sysdev_register(&clockevents_sys_device); - if (!error) - error = sysdev_create_file( - &clockevents_sys_device, - &attr_registered); - return error; -} -device_initcall(clockevents_sysfs_init); -#endif |