aboutsummaryrefslogtreecommitdiff
path: root/kernel
diff options
context:
space:
mode:
authorIngo Molnar <mingo@elte.hu>2007-07-09 18:51:57 +0200
committerIngo Molnar <mingo@elte.hu>2007-07-09 18:51:57 +0200
commit0437e109e1841607f2988891eaa36c531c6aa6ac (patch)
treee9d8f170786f7e33d4c5829cb008cf38d42a2014 /kernel
parent0e6aca43e08a62a48d6770e9a159dbec167bf4c6 (diff)
sched: zap the migration init / cache-hot balancing code
the SMP load-balancer uses the boot-time migration-cost estimation code to attempt to improve the quality of balancing. The reason for this code is that the discrete priority queues do not preserve the order of scheduling accurately, so the load-balancer skips tasks that were running on a CPU 'recently'. this code is fundamental fragile: the boot-time migration cost detector doesnt really work on systems that had large L3 caches, it caused boot delays on large systems and the whole cache-hot concept made the balancing code pretty undeterministic as well. (and hey, i wrote most of it, so i can say it out loud that it sucks ;-) under CFS the same purpose of cache affinity can be achieved without any special cache-hot special-case: tasks are sorted in the 'timeline' tree and the SMP balancer picks tasks from the left side of the tree, thus the most cache-cold task is balanced automatically. Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'kernel')
-rw-r--r--kernel/sched.c481
1 files changed, 0 insertions, 481 deletions
diff --git a/kernel/sched.c b/kernel/sched.c
index ac054d9a071..46b23f0fee2 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5797,483 +5797,6 @@ init_sched_build_groups(cpumask_t span, const cpumask_t *cpu_map,
#define SD_NODES_PER_DOMAIN 16
-/*
- * Self-tuning task migration cost measurement between source and target CPUs.
- *
- * This is done by measuring the cost of manipulating buffers of varying
- * sizes. For a given buffer-size here are the steps that are taken:
- *
- * 1) the source CPU reads+dirties a shared buffer
- * 2) the target CPU reads+dirties the same shared buffer
- *
- * We measure how long they take, in the following 4 scenarios:
- *
- * - source: CPU1, target: CPU2 | cost1
- * - source: CPU2, target: CPU1 | cost2
- * - source: CPU1, target: CPU1 | cost3
- * - source: CPU2, target: CPU2 | cost4
- *
- * We then calculate the cost3+cost4-cost1-cost2 difference - this is
- * the cost of migration.
- *
- * We then start off from a small buffer-size and iterate up to larger
- * buffer sizes, in 5% steps - measuring each buffer-size separately, and
- * doing a maximum search for the cost. (The maximum cost for a migration
- * normally occurs when the working set size is around the effective cache
- * size.)
- */
-#define SEARCH_SCOPE 2
-#define MIN_CACHE_SIZE (64*1024U)
-#define DEFAULT_CACHE_SIZE (5*1024*1024U)
-#define ITERATIONS 1
-#define SIZE_THRESH 130
-#define COST_THRESH 130
-
-/*
- * The migration cost is a function of 'domain distance'. Domain
- * distance is the number of steps a CPU has to iterate down its
- * domain tree to share a domain with the other CPU. The farther
- * two CPUs are from each other, the larger the distance gets.
- *
- * Note that we use the distance only to cache measurement results,
- * the distance value is not used numerically otherwise. When two
- * CPUs have the same distance it is assumed that the migration
- * cost is the same. (this is a simplification but quite practical)
- */
-#define MAX_DOMAIN_DISTANCE 32
-
-static unsigned long long migration_cost[MAX_DOMAIN_DISTANCE] =
- { [ 0 ... MAX_DOMAIN_DISTANCE-1 ] =
-/*
- * Architectures may override the migration cost and thus avoid
- * boot-time calibration. Unit is nanoseconds. Mostly useful for
- * virtualized hardware:
- */
-#ifdef CONFIG_DEFAULT_MIGRATION_COST
- CONFIG_DEFAULT_MIGRATION_COST
-#else
- -1LL
-#endif
-};
-
-/*
- * Allow override of migration cost - in units of microseconds.
- * E.g. migration_cost=1000,2000,3000 will set up a level-1 cost
- * of 1 msec, level-2 cost of 2 msecs and level3 cost of 3 msecs:
- */
-static int __init migration_cost_setup(char *str)
-{
- int ints[MAX_DOMAIN_DISTANCE+1], i;
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
-
- printk("#ints: %d\n", ints[0]);
- for (i = 1; i <= ints[0]; i++) {
- migration_cost[i-1] = (unsigned long long)ints[i]*1000;
- printk("migration_cost[%d]: %Ld\n", i-1, migration_cost[i-1]);
- }
- return 1;
-}
-
-__setup ("migration_cost=", migration_cost_setup);
-
-/*
- * Global multiplier (divisor) for migration-cutoff values,
- * in percentiles. E.g. use a value of 150 to get 1.5 times
- * longer cache-hot cutoff times.
- *
- * (We scale it from 100 to 128 to long long handling easier.)
- */
-
-#define MIGRATION_FACTOR_SCALE 128
-
-static unsigned int migration_factor = MIGRATION_FACTOR_SCALE;
-
-static int __init setup_migration_factor(char *str)
-{
- get_option(&str, &migration_factor);
- migration_factor = migration_factor * MIGRATION_FACTOR_SCALE / 100;
- return 1;
-}
-
-__setup("migration_factor=", setup_migration_factor);
-
-/*
- * Estimated distance of two CPUs, measured via the number of domains
- * we have to pass for the two CPUs to be in the same span:
- */
-static unsigned long domain_distance(int cpu1, int cpu2)
-{
- unsigned long distance = 0;
- struct sched_domain *sd;
-
- for_each_domain(cpu1, sd) {
- WARN_ON(!cpu_isset(cpu1, sd->span));
- if (cpu_isset(cpu2, sd->span))
- return distance;
- distance++;
- }
- if (distance >= MAX_DOMAIN_DISTANCE) {
- WARN_ON(1);
- distance = MAX_DOMAIN_DISTANCE-1;
- }
-
- return distance;
-}
-
-static unsigned int migration_debug;
-
-static int __init setup_migration_debug(char *str)
-{
- get_option(&str, &migration_debug);
- return 1;
-}
-
-__setup("migration_debug=", setup_migration_debug);
-
-/*
- * Maximum cache-size that the scheduler should try to measure.
- * Architectures with larger caches should tune this up during
- * bootup. Gets used in the domain-setup code (i.e. during SMP
- * bootup).
- */
-unsigned int max_cache_size;
-
-static int __init setup_max_cache_size(char *str)
-{
- get_option(&str, &max_cache_size);
- return 1;
-}
-
-__setup("max_cache_size=", setup_max_cache_size);
-
-/*
- * Dirty a big buffer in a hard-to-predict (for the L2 cache) way. This
- * is the operation that is timed, so we try to generate unpredictable
- * cachemisses that still end up filling the L2 cache:
- */
-static void touch_cache(void *__cache, unsigned long __size)
-{
- unsigned long size = __size / sizeof(long);
- unsigned long chunk1 = size / 3;
- unsigned long chunk2 = 2 * size / 3;
- unsigned long *cache = __cache;
- int i;
-
- for (i = 0; i < size/6; i += 8) {
- switch (i % 6) {
- case 0: cache[i]++;
- case 1: cache[size-1-i]++;
- case 2: cache[chunk1-i]++;
- case 3: cache[chunk1+i]++;
- case 4: cache[chunk2-i]++;
- case 5: cache[chunk2+i]++;
- }
- }
-}
-
-/*
- * Measure the cache-cost of one task migration. Returns in units of nsec.
- */
-static unsigned long long
-measure_one(void *cache, unsigned long size, int source, int target)
-{
- cpumask_t mask, saved_mask;
- unsigned long long t0, t1, t2, t3, cost;
-
- saved_mask = current->cpus_allowed;
-
- /*
- * Flush source caches to RAM and invalidate them:
- */
- sched_cacheflush();
-
- /*
- * Migrate to the source CPU:
- */
- mask = cpumask_of_cpu(source);
- set_cpus_allowed(current, mask);
- WARN_ON(smp_processor_id() != source);
-
- /*
- * Dirty the working set:
- */
- t0 = sched_clock();
- touch_cache(cache, size);
- t1 = sched_clock();
-
- /*
- * Migrate to the target CPU, dirty the L2 cache and access
- * the shared buffer. (which represents the working set
- * of a migrated task.)
- */
- mask = cpumask_of_cpu(target);
- set_cpus_allowed(current, mask);
- WARN_ON(smp_processor_id() != target);
-
- t2 = sched_clock();
- touch_cache(cache, size);
- t3 = sched_clock();
-
- cost = t1-t0 + t3-t2;
-
- if (migration_debug >= 2)
- printk("[%d->%d]: %8Ld %8Ld %8Ld => %10Ld.\n",
- source, target, t1-t0, t1-t0, t3-t2, cost);
- /*
- * Flush target caches to RAM and invalidate them:
- */
- sched_cacheflush();
-
- set_cpus_allowed(current, saved_mask);
-
- return cost;
-}
-
-/*
- * Measure a series of task migrations and return the average
- * result. Since this code runs early during bootup the system
- * is 'undisturbed' and the average latency makes sense.
- *
- * The algorithm in essence auto-detects the relevant cache-size,
- * so it will properly detect different cachesizes for different
- * cache-hierarchies, depending on how the CPUs are connected.
- *
- * Architectures can prime the upper limit of the search range via
- * max_cache_size, otherwise the search range defaults to 20MB...64K.
- */
-static unsigned long long
-measure_cost(int cpu1, int cpu2, void *cache, unsigned int size)
-{
- unsigned long long cost1, cost2;
- int i;
-
- /*
- * Measure the migration cost of 'size' bytes, over an
- * average of 10 runs:
- *
- * (We perturb the cache size by a small (0..4k)
- * value to compensate size/alignment related artifacts.
- * We also subtract the cost of the operation done on
- * the same CPU.)
- */
- cost1 = 0;
-
- /*
- * dry run, to make sure we start off cache-cold on cpu1,
- * and to get any vmalloc pagefaults in advance:
- */
- measure_one(cache, size, cpu1, cpu2);
- for (i = 0; i < ITERATIONS; i++)
- cost1 += measure_one(cache, size - i * 1024, cpu1, cpu2);
-
- measure_one(cache, size, cpu2, cpu1);
- for (i = 0; i < ITERATIONS; i++)
- cost1 += measure_one(cache, size - i * 1024, cpu2, cpu1);
-
- /*
- * (We measure the non-migrating [cached] cost on both
- * cpu1 and cpu2, to handle CPUs with different speeds)
- */
- cost2 = 0;
-
- measure_one(cache, size, cpu1, cpu1);
- for (i = 0; i < ITERATIONS; i++)
- cost2 += measure_one(cache, size - i * 1024, cpu1, cpu1);
-
- measure_one(cache, size, cpu2, cpu2);
- for (i = 0; i < ITERATIONS; i++)
- cost2 += measure_one(cache, size - i * 1024, cpu2, cpu2);
-
- /*
- * Get the per-iteration migration cost:
- */
- do_div(cost1, 2 * ITERATIONS);
- do_div(cost2, 2 * ITERATIONS);
-
- return cost1 - cost2;
-}
-
-static unsigned long long measure_migration_cost(int cpu1, int cpu2)
-{
- unsigned long long max_cost = 0, fluct = 0, avg_fluct = 0;
- unsigned int max_size, size, size_found = 0;
- long long cost = 0, prev_cost;
- void *cache;
-
- /*
- * Search from max_cache_size*5 down to 64K - the real relevant
- * cachesize has to lie somewhere inbetween.
- */
- if (max_cache_size) {
- max_size = max(max_cache_size * SEARCH_SCOPE, MIN_CACHE_SIZE);
- size = max(max_cache_size / SEARCH_SCOPE, MIN_CACHE_SIZE);
- } else {
- /*
- * Since we have no estimation about the relevant
- * search range
- */
- max_size = DEFAULT_CACHE_SIZE * SEARCH_SCOPE;
- size = MIN_CACHE_SIZE;
- }
-
- if (!cpu_online(cpu1) || !cpu_online(cpu2)) {
- printk("cpu %d and %d not both online!\n", cpu1, cpu2);
- return 0;
- }
-
- /*
- * Allocate the working set:
- */
- cache = vmalloc(max_size);
- if (!cache) {
- printk("could not vmalloc %d bytes for cache!\n", 2 * max_size);
- return 1000000; /* return 1 msec on very small boxen */
- }
-
- while (size <= max_size) {
- prev_cost = cost;
- cost = measure_cost(cpu1, cpu2, cache, size);
-
- /*
- * Update the max:
- */
- if (cost > 0) {
- if (max_cost < cost) {
- max_cost = cost;
- size_found = size;
- }
- }
- /*
- * Calculate average fluctuation, we use this to prevent
- * noise from triggering an early break out of the loop:
- */
- fluct = abs(cost - prev_cost);
- avg_fluct = (avg_fluct + fluct)/2;
-
- if (migration_debug)
- printk("-> [%d][%d][%7d] %3ld.%ld [%3ld.%ld] (%ld): "
- "(%8Ld %8Ld)\n",
- cpu1, cpu2, size,
- (long)cost / 1000000,
- ((long)cost / 100000) % 10,
- (long)max_cost / 1000000,
- ((long)max_cost / 100000) % 10,
- domain_distance(cpu1, cpu2),
- cost, avg_fluct);
-
- /*
- * If we iterated at least 20% past the previous maximum,
- * and the cost has dropped by more than 20% already,
- * (taking fluctuations into account) then we assume to
- * have found the maximum and break out of the loop early:
- */
- if (size_found && (size*100 > size_found*SIZE_THRESH))
- if (cost+avg_fluct <= 0 ||
- max_cost*100 > (cost+avg_fluct)*COST_THRESH) {
-
- if (migration_debug)
- printk("-> found max.\n");
- break;
- }
- /*
- * Increase the cachesize in 10% steps:
- */
- size = size * 10 / 9;
- }
-
- if (migration_debug)
- printk("[%d][%d] working set size found: %d, cost: %Ld\n",
- cpu1, cpu2, size_found, max_cost);
-
- vfree(cache);
-
- /*
- * A task is considered 'cache cold' if at least 2 times
- * the worst-case cost of migration has passed.
- *
- * (this limit is only listened to if the load-balancing
- * situation is 'nice' - if there is a large imbalance we
- * ignore it for the sake of CPU utilization and
- * processing fairness.)
- */
- return 2 * max_cost * migration_factor / MIGRATION_FACTOR_SCALE;
-}
-
-static void calibrate_migration_costs(const cpumask_t *cpu_map)
-{
- int cpu1 = -1, cpu2 = -1, cpu, orig_cpu = raw_smp_processor_id();
- unsigned long j0, j1, distance, max_distance = 0;
- struct sched_domain *sd;
-
- j0 = jiffies;
-
- /*
- * First pass - calculate the cacheflush times:
- */
- for_each_cpu_mask(cpu1, *cpu_map) {
- for_each_cpu_mask(cpu2, *cpu_map) {
- if (cpu1 == cpu2)
- continue;
- distance = domain_distance(cpu1, cpu2);
- max_distance = max(max_distance, distance);
- /*
- * No result cached yet?
- */
- if (migration_cost[distance] == -1LL)
- migration_cost[distance] =
- measure_migration_cost(cpu1, cpu2);
- }
- }
- /*
- * Second pass - update the sched domain hierarchy with
- * the new cache-hot-time estimations:
- */
- for_each_cpu_mask(cpu, *cpu_map) {
- distance = 0;
- for_each_domain(cpu, sd) {
- sd->cache_hot_time = migration_cost[distance];
- distance++;
- }
- }
- /*
- * Print the matrix:
- */
- if (migration_debug)
- printk("migration: max_cache_size: %d, cpu: %d MHz:\n",
- max_cache_size,
-#ifdef CONFIG_X86
- cpu_khz/1000
-#else
- -1
-#endif
- );
- if (system_state == SYSTEM_BOOTING && num_online_cpus() > 1) {
- printk("migration_cost=");
- for (distance = 0; distance <= max_distance; distance++) {
- if (distance)
- printk(",");
- printk("%ld", (long)migration_cost[distance] / 1000);
- }
- printk("\n");
- }
- j1 = jiffies;
- if (migration_debug)
- printk("migration: %ld seconds\n", (j1-j0) / HZ);
-
- /*
- * Move back to the original CPU. NUMA-Q gets confused
- * if we migrate to another quad during bootup.
- */
- if (raw_smp_processor_id() != orig_cpu) {
- cpumask_t mask = cpumask_of_cpu(orig_cpu),
- saved_mask = current->cpus_allowed;
-
- set_cpus_allowed(current, mask);
- set_cpus_allowed(current, saved_mask);
- }
-}
-
#ifdef CONFIG_NUMA
/**
@@ -6803,10 +6326,6 @@ static int build_sched_domains(const cpumask_t *cpu_map)
#endif
cpu_attach_domain(sd, i);
}
- /*
- * Tune cache-hot values:
- */
- calibrate_migration_costs(cpu_map);
return 0;