aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-05-16 00:51:42 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-05-16 00:51:42 +0200
commit6b8cf7724bd0f8ae1f61937c5f40f4dbbda40960 (patch)
tree61102c2ba75447441d54d0cb035e51416a7dc6ce /drivers/ide
parent9445de76c124e90176b5116cf82f6cd1413f5230 (diff)
downloadlinux-2.6.34-ux500-6b8cf7724bd0f8ae1f61937c5f40f4dbbda40960.tar.gz
sis5513: PIO mode setup fixes
* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to program PIO5 by config_art_rwp_pio() could result in incorrect PIO timings being programmed and possibly the data corruption (for < ATA100 family chipsets PIO0 timings were used, for ATA100 and ATA100a - the random content of test1 variable was used, for ATA133 - MWDMA0 timings were used) * BUG() in sis5513_tune_chipset() if somebody tries to force unsupported PIO5, also cleanup this function a bit while at it * add comment about PIO0 timings for < ATA100 family chipsets * remove open-coded best PIO mode selection from config_art_rwp_pio(), it contained numerous bugs: - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy before using them - it tried to found out maximum PIO mode basing on minimum IORDY cycle time (moreover wrong cycle times were used for PIO1/5) - it was overriding PIO blacklist and conservative PIO "downgrade" done by ide_get_best_pio_mode() * use sis5513_tune_drive() instead of config_art_rwp_pio() in sis5513_config_xfer_rate() so the correct PIO mode is also set on drive even if the device is not IORDY/DMA capable * config_art_rwp_pio() was always setting the best possible mode and not the wanted one - fix it and move ide_get_best_pio_mode() call to config_chipset_for_pio() * don't use ide_find_best_mode() in config_chipset_for_pio(), it was being overriden by config_art_rwp_pio() for the host timings anyway + we need to set the same PIO mode on the device and the host * pass correct "pio" argument (255 instead of 5) to sis5513_tune_drive() call in sis5513_config_xfer_rate() so the best PIO mode is set on the drive and not PIO4 * rename sis5513_tune_drive() to sis5513_tuneproc() and config_chipset_for_pio() to sis5513_tune_driver() * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/pci/sis5513.c85
1 files changed, 36 insertions, 49 deletions
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 2bde1b92784..bb6cc4aedd6 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,9 +1,11 @@
/*
- * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003
+ * linux/drivers/ide/pci/sis5513.c Version 0.20 Mar 4, 2007
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
*
@@ -448,36 +450,15 @@ static void config_drive_art_rwp (ide_drive_t *drive)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
}
-
/* Set per-drive active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 timing, drive_pci, test1, test2;
-
- u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
- u16 xfer_pio = drive->id->eide_pio_modes;
+ u8 drive_pci, test1, test2;
config_drive_art_rwp(drive);
- pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
-
- if (xfer_pio> 4)
- xfer_pio = 0;
-
- if (drive->id->eide_pio_iordy > 0) {
- for (xfer_pio = 5;
- (xfer_pio > 0) &&
- (drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]);
- xfer_pio--);
- } else {
- xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
- (drive->id->eide_pio_modes & 2) ? 0x04 :
- (drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio;
- }
-
- timing = (xfer_pio >= pio) ? xfer_pio : pio;
/* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
drive_pci = 0x40;
@@ -500,17 +481,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
test1 &= ~0x0F;
test2 &= ~0x07;
- switch(timing) {
+ switch(pio) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
case 3: test1 |= 0x03; test2 |= 0x03; break;
case 2: test1 |= 0x04; test2 |= 0x04; break;
case 1: test1 |= 0x07; test2 |= 0x06; break;
+ case 0: /* PIO0: register setting == X000 */
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
pci_write_config_byte(dev, drive_pci+1, test2);
} else if (chipset_family < ATA_133) {
- switch(timing) { /* active recovery
+ switch(pio) { /* active recovery
v v */
case 4: test1 = 0x30|0x01; break;
case 3: test1 = 0x30|0x03; break;
@@ -525,24 +507,28 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
pci_read_config_dword(dev, drive_pci, &test3);
test3 &= 0xc0c00fff;
if (test3 & 0x08) {
- test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12;
- test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16;
- test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24;
+ test3 |= ini_time_value[ATA_133][pio] << 12;
+ test3 |= act_time_value[ATA_133][pio] << 16;
+ test3 |= rco_time_value[ATA_133][pio] << 24;
} else {
- test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12;
- test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16;
- test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24;
+ test3 |= ini_time_value[ATA_100][pio] << 12;
+ test3 |= act_time_value[ATA_100][pio] << 16;
+ test3 |= rco_time_value[ATA_100][pio] << 24;
}
pci_write_config_dword(dev, drive_pci, test3);
}
}
-static int config_chipset_for_pio (ide_drive_t *drive, u8 pio)
+static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255)
- pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
config_art_rwp_pio(drive, pio);
- return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
+ return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
+static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ (void)sis5513_tune_drive(drive, pio);
}
static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
@@ -622,25 +608,26 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
break;
- case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
- case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
- case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
- case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
case XFER_PIO_0:
- default: return((int) config_chipset_for_pio(drive, 0));
+ return sis5513_tune_drive(drive, speed - XFER_PIO_0);
+ default:
+ BUG();
+ break;
}
- return ((int) ide_config_drive_speed(drive, speed));
-}
-
-static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
-{
- (void) config_chipset_for_pio(drive, pio);
+ return ide_config_drive_speed(drive, speed);
}
static int sis5513_config_xfer_rate(ide_drive_t *drive)
{
- config_art_rwp_pio(drive, 5);
+ /*
+ * TODO: always set PIO mode and remove this
+ */
+ sis5513_tuneproc(drive, 255);
drive->init_speed = 0;
@@ -648,7 +635,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- sis5513_tune_drive(drive, 5);
+ sis5513_tuneproc(drive, 255);
return -1;
}
@@ -836,7 +823,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &sis5513_tune_drive;
+ hwif->tuneproc = &sis5513_tuneproc;
hwif->speedproc = &sis5513_tune_chipset;
if (!(hwif->dma_base)) {