aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-07 12:17:40 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-07 12:17:40 -0700
commit5b6b54982258c330247957a8d877b9851ac69d53 (patch)
tree567e4b3391e0c6689cf511789fb512ef7385c16f /arch
parent35c74823cb382c610be908f1b92f980b84e7c37c (diff)
parent39374aadcd0159b4744ab456f4efa100bea84bd4 (diff)
downloadlinux-2.6.34-ux500-5b6b54982258c330247957a8d877b9851ac69d53.tar.gz
Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (38 commits) sh: R7785RP board updates. sh: Update r7780rp defconfig. sh: Add die chain notifiers. sh: Fix APM emulation on hp6xx. sh: Wire up more IRQs for SH7709. sh: Solution Engine 7722 board support. sh: Fix r7780rp build. sh: kdump support. sh: Move clock reporting to its own proc entry. sh: Solution Engine SH7705 board and CPU updates. serial: sh-sci: Fix module clock refcount for serial console. serial: sh-sci: Fix module clock refcounting. sh: SH7722 clock framework support. sh: hp6xx pata_platform support. sh: Obey CONFIG_HZ for HZ definition. sh: Fix fstatat64() syscall. sh: se7780 PCI support. sh: SH7780 Solution Engine board support. sh: Add a dummy SH-4 PCIC fixup. sh: Tidy up L-BOX area5 addresses. ...
Diffstat (limited to 'arch')
-rw-r--r--arch/sh/Kconfig97
-rw-r--r--arch/sh/Kconfig.debug20
-rw-r--r--arch/sh/Makefile6
-rw-r--r--arch/sh/boards/hp6xx/Makefile4
-rw-r--r--arch/sh/boards/hp6xx/setup.c67
-rw-r--r--arch/sh/boards/landisk/Makefile2
-rw-r--r--arch/sh/boards/landisk/gio.c167
-rw-r--r--arch/sh/boards/landisk/io.c250
-rw-r--r--arch/sh/boards/landisk/irq.c83
-rw-r--r--arch/sh/boards/landisk/landisk_pwb.c346
-rw-r--r--arch/sh/boards/landisk/psw.c143
-rw-r--r--arch/sh/boards/landisk/rtc.c91
-rw-r--r--arch/sh/boards/landisk/setup.c163
-rw-r--r--arch/sh/boards/lboxre2/Makefile5
-rw-r--r--arch/sh/boards/lboxre2/irq.c31
-rw-r--r--arch/sh/boards/lboxre2/setup.c85
-rw-r--r--arch/sh/boards/renesas/r7780rp/Kconfig18
-rw-r--r--arch/sh/boards/renesas/r7780rp/Makefile6
-rw-r--r--arch/sh/boards/renesas/r7780rp/irq-r7780rp.c21
-rw-r--r--arch/sh/boards/renesas/r7780rp/irq-r7785rp.c29
-rw-r--r--arch/sh/boards/renesas/r7780rp/irq.c25
-rw-r--r--arch/sh/boards/renesas/r7780rp/setup.c78
-rw-r--r--arch/sh/boards/se/770x/io.c2
-rw-r--r--arch/sh/boards/se/770x/irq.c57
-rw-r--r--arch/sh/boards/se/770x/setup.c30
-rw-r--r--arch/sh/boards/se/7722/Makefile10
-rw-r--r--arch/sh/boards/se/7722/irq.c101
-rw-r--r--arch/sh/boards/se/7722/setup.c148
-rw-r--r--arch/sh/boards/se/7751/setup.c148
-rw-r--r--arch/sh/boards/se/7780/Makefile10
-rw-r--r--arch/sh/boards/se/7780/irq.c89
-rw-r--r--arch/sh/boards/se/7780/setup.c122
-rw-r--r--arch/sh/configs/lboxre2_defconfig1271
-rw-r--r--arch/sh/configs/r7780rp_defconfig108
-rw-r--r--arch/sh/configs/r7785rp_defconfig1334
-rw-r--r--arch/sh/configs/se7705_defconfig106
-rw-r--r--arch/sh/configs/se7712_defconfig1088
-rw-r--r--arch/sh/configs/se7722_defconfig980
-rw-r--r--arch/sh/configs/se7780_defconfig1309
-rw-r--r--arch/sh/drivers/Kconfig10
-rw-r--r--arch/sh/drivers/heartbeat.c13
-rw-r--r--arch/sh/drivers/pci/Makefile5
-rw-r--r--arch/sh/drivers/pci/fixups-lboxre2.c41
-rw-r--r--arch/sh/drivers/pci/fixups-se7780.c60
-rw-r--r--arch/sh/drivers/pci/ops-landisk.c4
-rw-r--r--arch/sh/drivers/pci/ops-lboxre2.c63
-rw-r--r--arch/sh/drivers/pci/ops-r7780rp.c27
-rw-r--r--arch/sh/drivers/pci/ops-se7780.c96
-rw-r--r--arch/sh/drivers/pci/ops-sh4.c6
-rw-r--r--arch/sh/drivers/pci/pci-sh4.h2
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.c15
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c45
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.h19
-rw-r--r--arch/sh/kernel/Makefile1
-rw-r--r--arch/sh/kernel/cf-enabler.c28
-rw-r--r--arch/sh/kernel/cpu/clock.c102
-rw-r--r--arch/sh/kernel/cpu/init.c19
-rw-r--r--arch/sh/kernel/cpu/irq/Makefile2
-rw-r--r--arch/sh/kernel/cpu/irq/intc2.c3
-rw-r--r--arch/sh/kernel/cpu/irq/pint.c56
-rw-r--r--arch/sh/kernel/cpu/sh3/Makefile1
-rw-r--r--arch/sh/kernel/cpu/sh3/probe.c3
-rw-r--r--arch/sh/kernel/cpu/sh3/setup-sh7705.c54
-rw-r--r--arch/sh/kernel/cpu/sh3/setup-sh7709.c29
-rw-r--r--arch/sh/kernel/cpu/sh3/setup-sh7710.c60
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh4-202.c3
-rw-r--r--arch/sh/kernel/cpu/sh4/probe.c8
-rw-r--r--arch/sh/kernel/cpu/sh4a/Makefile4
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7722.c600
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7785.c162
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7785.c103
-rw-r--r--arch/sh/kernel/crash_dump.c46
-rw-r--r--arch/sh/kernel/irq.c5
-rw-r--r--arch/sh/kernel/kgdb_stub.c490
-rw-r--r--arch/sh/kernel/machine_kexec.c29
-rw-r--r--arch/sh/kernel/process.c14
-rw-r--r--arch/sh/kernel/setup.c267
-rw-r--r--arch/sh/kernel/sh_ksyms.c1
-rw-r--r--arch/sh/kernel/timers/timer-tmu.c4
-rw-r--r--arch/sh/kernel/traps.c73
-rw-r--r--arch/sh/kernel/vmlinux.lds.S47
-rw-r--r--arch/sh/lib/Makefile4
-rw-r--r--arch/sh/lib/udivdi3.c16
-rw-r--r--arch/sh/mm/Kconfig20
-rw-r--r--arch/sh/mm/fault.c39
-rw-r--r--arch/sh/mm/init.c197
-rw-r--r--arch/sh/tools/mach-types2
87 files changed, 9396 insertions, 2152 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 4d16d891707..d74eb120a9c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -22,6 +22,10 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM
bool
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
config GENERIC_FIND_NEXT_BIT
bool
default y
@@ -88,6 +92,14 @@ config SH_SOLUTION_ENGINE
Select SolutionEngine if configuring for a Hitachi SH7709
or SH7750 evaluation board.
+config SH_7722_SOLUTION_ENGINE
+ bool "SolutionEngine7722"
+ select SOLUTION_ENGINE
+ select CPU_SUBTYPE_SH7722
+ help
+ Select 7722 SolutionEngine if configuring for a Hitachi SH772
+ evaluation board.
+
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
@@ -95,6 +107,14 @@ config SH_7751_SOLUTION_ENGINE
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
+
+config SH_7780_SOLUTION_ENGINE
+ bool "SolutionEngine7780"
+ select SOLUTION_ENGINE
+ select CPU_SUBTYPE_SH7780
+ help
+ Select 7780 SolutionEngine if configuring for a Renesas SH7780
+ evaluation board.
config SH_7300_SOLUTION_ENGINE
bool "SolutionEngine7300"
@@ -193,12 +213,8 @@ config SH_RTS7751R2D
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
-config SH_R7780RP
- bool "R7780RP-1"
- select CPU_SUBTYPE_SH7780
- help
- Select R7780RP-1 if configuring for a Renesas Solutions
- HIGHLANDER board.
+config SH_HIGHLANDER
+ bool "Highlander"
config SH_EDOSK7705
bool "EDOSK7705"
@@ -243,6 +259,12 @@ config SH_7619_SOLUTION_ENGINE
help
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
+
+config SH_LBOX_RE2
+ bool "L-BOX RE2"
+ select CPU_SUBTYPE_SH7751R
+ help
+ Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
config SH_UNKNOWN
bool "BareCPU"
@@ -258,6 +280,10 @@ config SH_UNKNOWN
endchoice
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
+
source "arch/sh/mm/Kconfig"
config CF_ENABLER
@@ -366,6 +392,16 @@ config SH_STORE_QUEUES
Selecting this option will enable an in-kernel API for manipulating
the store queues integrated in the SH-4 processors.
+config SPECULATIVE_EXECUTION
+ bool "Speculative subroutine return"
+ depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+ help
+ This enables support for a speculative instruction fetch for
+ subroutine return. There are various pitfalls associated with
+ this, as outlined in the SH7780 hardware manual.
+
+ If unsure, say N.
+
config CPU_HAS_INTEVT
bool
@@ -398,8 +434,9 @@ config CPU_HAS_PTEA
endmenu
-menu "Timer support"
-depends on !GENERIC_TIME
+menu "Timer and clock configuration"
+
+if !GENERIC_TIME
config SH_TMU
bool "TMU timer support"
@@ -422,17 +459,11 @@ config SH_MTU2
help
This enables the use of the MTU2 as the system timer.
-endmenu
-
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
+endif
config SH_TIMER_IRQ
int
- default "28" if CPU_SUBTYPE_SH7780
+ default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
default "16"
@@ -462,7 +493,8 @@ config SH_PCLK_FREQ
default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206
- default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
+ default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
+ CPU_SUBTYPE_SH7785
default "60000000" if CPU_SUBTYPE_SH7751
default "66000000" if CPU_SUBTYPE_SH4_202
help
@@ -477,6 +509,8 @@ config SH_CLK_MD
help
MD2 - MD0 pin setting.
+endmenu
+
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
@@ -495,21 +529,6 @@ config SH_CPU_FREQ
endmenu
-source "arch/sh/drivers/dma/Kconfig"
-
-source "arch/sh/cchips/Kconfig"
-
-config HEARTBEAT
- bool "Heartbeat LED"
- depends on SH_MPC1211 || SH_SH03 || \
- SOLUTION_ENGINE || \
- SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
- SH_R7780RP
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
source "arch/sh/drivers/Kconfig"
endmenu
@@ -540,6 +559,20 @@ config KEXEC
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel using
+ MEMORY_START.
+
+ For more details see Documentation/kdump/kdump.txt
+
config SMP
bool "Symmetric multi-processing support"
---help---
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 87902e0298e..b56307294b6 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -33,6 +33,7 @@ config EARLY_SCIF_CONSOLE_PORT
default "0xffe00000" if CPU_SUBTYPE_SH7780
default "0xfffe9800" if CPU_SUBTYPE_SH7206
default "0xf8420000" if CPU_SUBTYPE_SH7619
+ default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
default "0xffe80000" if CPU_SH4
config EARLY_PRINTK
@@ -77,16 +78,17 @@ config 4KSTACKS
on the VM subsystem for higher order allocations. This option
will also use IRQ stacks to compensate for the reduced stackspace.
-config KGDB
+config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
+ select DEBUG_INFO
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
Unless you are intending to debug the kernel, say N here.
menu "KGDB configuration options"
- depends on KGDB
+ depends on SH_KGDB
config MORE_COMPILE_OPTIONS
bool "Add any additional compile options"
@@ -103,22 +105,16 @@ config KGDB_NMI
bool "Enter KGDB on NMI"
default n
-config KGDB_THREAD
- bool "Include KGDB thread support"
- default y
-
config SH_KGDB_CONSOLE
bool "Console messages through GDB"
+ depends on !SERIAL_SH_SCI_CONSOLE
+ select SERIAL_CORE_CONSOLE
default n
config KGDB_SYSRQ
bool "Allow SysRq 'G' to enter KGDB"
default y
-config KGDB_KERNEL_ASSERTS
- bool "Include KGDB kernel assertions"
- default n
-
comment "Serial port setup"
config KGDB_DEFPORT
@@ -131,7 +127,7 @@ config KGDB_DEFBAUD
choice
prompt "Parity"
- depends on KGDB
+ depends on SH_KGDB
default KGDB_DEFPARITY_N
config KGDB_DEFPARITY_N
@@ -147,7 +143,7 @@ endchoice
choice
prompt "Data bits"
- depends on KGDB
+ depends on SH_KGDB
default KGDB_DEFBITS_8
config KGDB_DEFBITS_8
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bd9b1729f8b..7b112241705 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -47,7 +47,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
cflags-$(CONFIG_SH_DSP) += -Wa,-dsp
-cflags-$(CONFIG_SH_KGDB) += -g
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
@@ -89,7 +88,9 @@ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
# Boards
machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x
+machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) := se/7722
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) := se/7780
machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300
machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343
machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180
@@ -103,7 +104,7 @@ machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip
machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705
-machdir-$(CONFIG_SH_R7780RP) := renesas/r7780rp
+machdir-$(CONFIG_SH_HIGHLANDER) := renesas/r7780rp
machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw
machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev
machdir-$(CONFIG_SH_LANDISK) := landisk
@@ -111,6 +112,7 @@ machdir-$(CONFIG_SH_TITAN) := titan
machdir-$(CONFIG_SH_SHMIN) := shmin
machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206
machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619
+machdir-$(CONFIG_SH_LBOX_RE2) := lboxre2
machdir-$(CONFIG_SH_UNKNOWN) := unknown
incdir-y := $(notdir $(machdir-y))
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile
index ff1b7f5b4e9..b3124278247 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/hp6xx/Makefile
@@ -2,6 +2,6 @@
# Makefile for the HP6xx specific parts of the kernel
#
-obj-y := setup.o
+obj-y := setup.o
obj-$(CONFIG_PM) += pm.o pm_wakeup.o
-obj-$(CONFIG_APM) += hp6xx_apm.o
+obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index b5a96649ed2..6aeee85c978 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -2,6 +2,7 @@
* linux/arch/sh/boards/hp6xx/setup.c
*
* Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
@@ -10,6 +11,7 @@
*/
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/hd64461.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -19,6 +21,40 @@
#define SCPCR 0xa4000116
#define SCPDR 0xa4000136
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+ [0] = {
+ .start = 0x15000000 + 0x1f0,
+ .end = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x15000000 + 0x1fe,
+ .end = 0x15000000 + 0x1fe + 0x01,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 93,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+ &cf_ide_device,
+};
+
+static int __init hp6xx_devices_setup(void)
+{
+ return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
static void __init hp6xx_setup(char **cmdline_p)
{
u8 v8;
@@ -60,41 +96,12 @@ static void __init hp6xx_setup(char **cmdline_p)
v |= SCPCR_TS_ENABLE;
ctrl_outw(v, SCPCR);
}
+device_initcall(hp6xx_devices_setup);
-/*
- * XXX: This is stupid, we should have a generic machine vector for the cchips
- * and just wrap the platform setup code in to this, as it's the only thing
- * that ends up being different.
- */
struct sh_machine_vector mv_hp6xx __initmv = {
.mv_name = "hp6xx",
.mv_setup = hp6xx_setup,
.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
-
- .mv_inb = hd64461_inb,
- .mv_inw = hd64461_inw,
- .mv_inl = hd64461_inl,
- .mv_outb = hd64461_outb,
- .mv_outw = hd64461_outw,
- .mv_outl = hd64461_outl,
-
- .mv_inb_p = hd64461_inb_p,
- .mv_inw_p = hd64461_inw,
- .mv_inl_p = hd64461_inl,
- .mv_outb_p = hd64461_outb_p,
- .mv_outw_p = hd64461_outw,
- .mv_outl_p = hd64461_outl,
-
- .mv_insb = hd64461_insb,
- .mv_insw = hd64461_insw,
- .mv_insl = hd64461_insl,
- .mv_outsb = hd64461_outsb,
- .mv_outsw = hd64461_outsw,
- .mv_outsl = hd64461_outsl,
-
- .mv_readw = hd64461_readw,
- .mv_writew = hd64461_writew,
-
.mv_irq_demux = hd64461_irq_demux,
};
ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile
index 89e4beb2ad4..a696b4277fa 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/landisk/Makefile
@@ -2,4 +2,4 @@
# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
#
-obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o
+obj-y := setup.o irq.o psw.o gio.o
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
new file mode 100644
index 00000000000..50d38be62f0
--- /dev/null
+++ b/arch/sh/boards/landisk/gio.c
@@ -0,0 +1,167 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ * Copylight (C) 2006 kogiidena
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/landisk/gio.h>
+#include <asm/landisk/iodata_landisk.h>
+
+#define DEVCOUNT 4
+#define GIO_MINOR 2 /* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ if (minor < DEVCOUNT) {
+ if (openCnt > 0) {
+ return -EALREADY;
+ } else {
+ openCnt++;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ if (minor < DEVCOUNT) {
+ openCnt--;
+ }
+ return 0;
+}
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned int data;
+ static unsigned int addr = 0;
+
+ if (cmd & 0x01) { /* write */
+ if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+ return -EFAULT;
+ }
+ }
+
+ switch (cmd) {
+ case GIODRV_IOCSGIOSETADDR: /* addres set */
+ addr = data;
+ break;
+
+ case GIODRV_IOCSGIODATA1: /* write byte */
+ ctrl_outb((unsigned char)(0x0ff & data), addr);
+ break;
+
+ case GIODRV_IOCSGIODATA2: /* write word */
+ if (addr & 0x01) {
+ return -EFAULT;
+ }
+ ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+ break;
+
+ case GIODRV_IOCSGIODATA4: /* write long */
+ if (addr & 0x03) {
+ return -EFAULT;
+ }
+ ctrl_outl(data, addr);
+ break;
+
+ case GIODRV_IOCGGIODATA1: /* read byte */
+ data = ctrl_inb(addr);
+ break;
+
+ case GIODRV_IOCGGIODATA2: /* read word */
+ if (addr & 0x01) {
+ return -EFAULT;
+ }
+ data = ctrl_inw(addr);
+ break;
+
+ case GIODRV_IOCGGIODATA4: /* read long */
+ if (addr & 0x03) {
+ return -EFAULT;
+ }
+ data = ctrl_inl(addr);
+ break;
+ default:
+ return -EFAULT;
+ break;
+ }
+
+ if ((cmd & 0x01) == 0) { /* read */
+ if (copy_to_user((int *)arg, &data, sizeof(int))) {
+ return -EFAULT;
+ }
+ }
+ return 0;
+}
+
+static struct file_operations gio_fops = {
+ .owner = THIS_MODULE,
+ .open = gio_open, /* open */
+ .release = gio_close, /* release */
+ .ioctl = gio_ioctl, /* ioctl */
+};
+
+static int __init gio_init(void)
+{
+ int error;
+
+ printk(KERN_INFO "gio: driver initialized\n");
+
+ openCnt = 0;
+
+ if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+ printk(KERN_ERR
+ "gio: Couldn't alloc_chrdev_region, error=%d\n",
+ error);
+ return 1;
+ }
+
+ cdev_p = cdev_alloc();
+ cdev_p->ops = &gio_fops;
+ error = cdev_add(cdev_p, dev, DEVCOUNT);
+ if (error) {
+ printk(KERN_ERR
+ "gio: Couldn't cdev_add, error=%d\n", error);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __exit gio_exit(void)
+{
+ cdev_del(cdev_p);
+ unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c
deleted file mode 100644
index 92498b4947d..00000000000
--- a/arch/sh/boards/landisk/io.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * arch/sh/boards/landisk/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for I-O Data Device, Inc. LANDISK.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_landisk.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-/*
- * modifed by kogiidena
- * 2005.03.03
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-extern void *area5_io_base; /* Area 5 I/O Base address */
-extern void *area6_io_base; /* Area 6 I/O Base address */
-
-static inline unsigned long port2adr(unsigned int port)
-{
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- if (port == 0x3f6)
- return ((unsigned long)area5_io_base + 0x2c);
- else
- return ((unsigned long)area5_io_base + PA_PIDE_OFFSET +
- ((port - 0x1f0) << 1));
- else if ((0x170 <= port && port < 0x178) || port == 0x376)
- if (port == 0x376)
- return ((unsigned long)area6_io_base + 0x2c);
- else
- return ((unsigned long)area6_io_base + PA_SIDE_OFFSET +
- ((port - 0x170) << 1));
- else
- maybebadio((unsigned long)port);
-
- return port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-u8 landisk_inb(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inb(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inb(pci_ioaddr(port));
-
- return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-u8 landisk_inb_p(unsigned long port)
-{
- u8 v;
-
- if (PXSEG(port))
- v = ctrl_inb(port);
- else if (is_pci_ioaddr(port))
- v = ctrl_inb(pci_ioaddr(port));
- else
- v = ctrl_inw(port2adr(port)) & 0xff;
-
- ctrl_delay();
-
- return v;
-}
-
-u16 landisk_inw(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inw(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inw(pci_ioaddr(port));
- else
- maybebadio(port);
-
- return 0;
-}
-
-u32 landisk_inl(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inl(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inl(pci_ioaddr(port));
- else
- maybebadio(port);
-
- return 0;
-}
-
-void landisk_outb(u8 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outb(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outb(value, pci_ioaddr(port));
- else
- ctrl_outw(value, port2adr(port));
-}
-
-void landisk_outb_p(u8 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outb(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outb(value, pci_ioaddr(port));
- else
- ctrl_outw(value, port2adr(port));
- ctrl_delay();
-}
-
-void landisk_outw(u16 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outw(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outw(value, pci_ioaddr(port));
- else
- maybebadio(port);
-}
-
-void landisk_outl(u32 value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outl(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outl(value, pci_ioaddr(port));
- else
- maybebadio(port);
-}
-
-void landisk_insb(unsigned long port, void *dst, unsigned long count)
-{
- volatile u16 *p;
- u8 *buf = dst;
-
- if (PXSEG(port)) {
- while (count--)
- *buf++ = *(volatile u8 *)port;
- } else if (is_pci_ioaddr(port)) {
- volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
- while (count--)
- *buf++ = *bp;
- } else {
- p = (volatile u16 *)port2adr(port);
- while (count--)
- *buf++ = *p & 0xff;
- }
-}
-
-void landisk_insw(unsigned long port, void *dst, unsigned long count)
-{
- volatile u16 *p;
- u16 *buf = dst;
-
- if (PXSEG(port))
- p = (volatile u16 *)port;
- else if (is_pci_ioaddr(port))
- p = (volatile u16 *)pci_ioaddr(port);
- else
- p = (volatile u16 *)port2adr(port);
- while (count--)
- *buf++ = *p;
-}
-
-void landisk_insl(unsigned long port, void *dst, unsigned long count)
-{
- u32 *buf = dst;
-
- if (is_pci_ioaddr(port)) {
- volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
- while (count--)
- *buf++ = *p;
- } else
- maybebadio(port);
-}
-
-void landisk_outsb(unsigned long port, const void *src, unsigned long count)
-{
- volatile u16 *p;
- const u8 *buf = src;
-
- if (PXSEG(port))
- while (count--)
- ctrl_outb(*buf++, port);
- else if (is_pci_ioaddr(port)) {
- volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
- while (count--)
- *bp = *buf++;
- } else {
- p = (volatile u16 *)port2adr(port);
- while (count--)
- *p = *buf++;
- }
-}
-
-void landisk_outsw(unsigned long port, const void *src, unsigned long count)
-{
- volatile u16 *p;
- const u16 *buf = src;
-
- if (PXSEG(port))
- p = (volatile u16 *)port;
- else if (is_pci_ioaddr(port))
- p = (volatile u16 *)pci_ioaddr(port);
- else
- p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *p = *buf++;
-}
-
-void landisk_outsl(unsigned long port, const void *src, unsigned long count)
-{
- const u32 *buf = src;
-
- if (is_pci_ioaddr(port)) {
- volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
- while (count--)
- *p = *buf++;
- } else
- maybebadio(port);
-}
-
-void __iomem *landisk_ioport_map(unsigned long port, unsigned int size)
-{
- if (PXSEG(port))
- return (void __iomem *)port;
- else if (is_pci_ioaddr(port))
- return (void __iomem *)pci_ioaddr(port);
-
- return (void __iomem *)port2adr(port);
-}
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
index 3eba6d086d7..258649491d4 100644
--- a/arch/sh/boards/landisk/irq.c
+++ b/arch/sh/boards/landisk/irq.c
@@ -1,18 +1,16 @@
/*
* arch/sh/boards/landisk/irq.c
*
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ *
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
- * I/O routine for I-O Data Device, Inc. LANDISK.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_landisk.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-/*
- * modified by kogiidena
- * 2005.03.03
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
@@ -20,71 +18,27 @@
#include <linux/io.h>
#include <asm/landisk/iodata_landisk.h>
-static void enable_landisk_irq(unsigned int irq);
-static void disable_landisk_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_landisk_irq disable_landisk_irq
-
-static void ack_landisk_irq(unsigned int irq);
-static void end_landisk_irq(unsigned int irq);
-
-static unsigned int startup_landisk_irq(unsigned int irq)
-{
- enable_landisk_irq(irq);
- return 0; /* never anything pending */
-}
-
static void disable_landisk_irq(unsigned int irq)
{
- unsigned char val;
unsigned char mask = 0xff ^ (0x01 << (irq - 5));
- /* Set the priority in IPR to 0 */
- val = ctrl_inb(PA_IMASK);
- val &= mask;
- ctrl_outb(val, PA_IMASK);
+ ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
}
static void enable_landisk_irq(unsigned int irq)
{
- unsigned char val;
unsigned char value = (0x01 << (irq - 5));
- /* Set priority in IPR back to original value */
- val = ctrl_inb(PA_IMASK);
- val |= value;
- ctrl_outb(val, PA_IMASK);
-}
-
-static void ack_landisk_irq(unsigned int irq)
-{
- disable_landisk_irq(irq);
-}
-
-static void end_landisk_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_landisk_irq(irq);
+ ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
}
-static struct hw_interrupt_type landisk_irq_type = {
- .typename = "LANDISK IRQ",
- .startup = startup_landisk_irq,
- .shutdown = shutdown_landisk_irq,
- .enable = enable_landisk_irq,
- .disable = disable_landisk_irq,
- .ack = ack_landisk_irq,
- .end = end_landisk_irq
+static struct irq_chip landisk_irq_chip __read_mostly = {
+ .name = "LANDISK",
+ .mask = disable_landisk_irq,
+ .unmask = enable_landisk_irq,
+ .mask_ack = disable_landisk_irq,
};
-static void make_landisk_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &landisk_irq_type;
- disable_landisk_irq(irq);
-}
-
/*
* Initialize IRQ setting
*/
@@ -92,6 +46,11 @@ void __init init_landisk_IRQ(void)
{
int i;
- for (i = 5; i < 14; i++)
- make_landisk_irq(i);
+ for (i = 5; i < 14; i++) {
+ disable_irq_nosync(i);
+ set_irq_chip_and_handler_name(i, &landisk_irq_chip,
+ handle_level_irq, "level");
+ enable_landisk_irq(i);
+ }
+ ctrl_outb(0x00, PA_PWRINT_CLR);
}
diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c
deleted file mode 100644
index 47a63c6617e..00000000000
--- a/arch/sh/boards/landisk/landisk_pwb.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch.
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- *
- * LED control drive function added by kogiidena
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/major.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/landisk/iodata_landisk.h>
-
-#define SHUTDOWN_BTN_MINOR 1 /* Shutdown button device minor no. */
-#define LED_MINOR 21 /* LED minor no. */
-#define BTN_MINOR 22 /* BUTTON minor no. */
-#define GIO_MINOR 40 /* GIO minor no. */
-
-static int openCnt;
-static int openCntLED;
-static int openCntGio;
-static int openCntBtn;
-static int landisk_btn;
-static int landisk_btnctrlpid;
-/*
- * Functions prototypes
- */
-
-static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg);
-
-static int swdrv_open(struct inode *inode, struct file *filp)
-{
- int minor;
-
- minor = MINOR(inode->i_rdev);
- filp->private_data = (void *)minor;
-
- if (minor == SHUTDOWN_BTN_MINOR) {
- if (openCnt > 0) {
- return -EALREADY;
- } else {
- openCnt++;
- return 0;
- }
- } else if (minor == LED_MINOR) {
- if (openCntLED > 0) {
- return -EALREADY;
- } else {
- openCntLED++;
- return 0;
- }
- } else if (minor == BTN_MINOR) {
- if (openCntBtn > 0) {
- return -EALREADY;
- } else {
- openCntBtn++;
- return 0;
- }
- } else if (minor == GIO_MINOR) {
- if (openCntGio > 0) {
- return -EALREADY;
- } else {
- openCntGio++;
- return 0;
- }
- }
- return -ENOENT;
-
-}
-
-static int swdrv_close(struct inode *inode, struct file *filp)
-{
- int minor;
-
- minor = MINOR(inode->i_rdev);
- if (minor == SHUTDOWN_BTN_MINOR) {
- openCnt--;
- } else if (minor == LED_MINOR) {
- openCntLED--;
- } else if (minor == BTN_MINOR) {
- openCntBtn--;
- } else if (minor == GIO_MINOR) {
- openCntGio--;
- }
- return 0;
-}
-
-static int swdrv_read(struct file *filp, char *buff, size_t count,
- loff_t * ppos)
-{
- int minor;
- minor = (int)(filp->private_data);
-
- if (!access_ok(VERIFY_WRITE, (void *)buff, count))
- return -EFAULT;
-
- if (minor == SHUTDOWN_BTN_MINOR) {
- if (landisk_btn & 0x10) {
- put_user(1, buff);
- return 1;
- } else {
- return 0;
- }
- }
- return 0;
-}
-
-static int swdrv_write(struct file *filp, const char *buff, size_t count,
- loff_t * ppos)
-{
- int minor;
- minor = (int)(filp->private_data);
-
- if (minor == SHUTDOWN_BTN_MINOR) {
- return count;
- }
- return count;
-}
-
-static irqreturn_t sw_interrupt(int irq, void *dev_id)
-{
- landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS)));
- disable_irq(IRQ_BUTTON);
- disable_irq(IRQ_POWER);
- ctrl_outb(0x00, PA_PWRINT_CLR);
-
- if (landisk_btnctrlpid != 0) {
- kill_proc(landisk_btnctrlpid, SIGUSR1, 1);
- landisk_btnctrlpid = 0;
- }
-
- return IRQ_HANDLED;
-}
-
-static const struct file_operations swdrv_fops = {
- .read = swdrv_read, /* read */
- .write = swdrv_write, /* write */
- .open = swdrv_open, /* open */
- .release = swdrv_close, /* release */
- .ioctl = gio_ioctl, /* ioctl */
-
-};
-
-static char banner[] __initdata =
- KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n";
-
-int __init swdrv_init(void)
-{
- int error;
-
- printk("%s", banner);
-
- openCnt = 0;
- openCntLED = 0;
- openCntBtn = 0;
- openCntGio = 0;
- landisk_btn = 0;
- landisk_btnctrlpid = 0;
-
- if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) {
- printk(KERN_ERR
- "Button, LED and GIO driver:Couldn't register driver, error=%d\n",
- error);
- return 1;
- }
-
- if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) {
- printk(KERN_ERR "Unable to get IRQ 11.\n");
- return 1;
- }
- if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) {
- printk(KERN_ERR "Unable to get IRQ 12.\n");
- return 1;
- }
- ctrl_outb(0x00, PA_PWRINT_CLR);
-
- return 0;
-}
-
-module_init(swdrv_init);
-
-/*
- * gio driver
- *
- */
-
-#include <asm/landisk/gio.h>
-
-static int gio_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- int minor;
- unsigned int data, mask;
- static unsigned int addr = 0;
-
- minor = (int)(filp->private_data);
-
- /* access control */
- if (minor == GIO_MINOR) {
- ;
- } else if (minor == LED_MINOR) {
- if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) {
- ;
- } else {
- return -EINVAL;
- }
- } else if (minor == BTN_MINOR) {
- if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) {
- ;
- } else {
- return -EINVAL;
- }
- } else {
- return -EINVAL;
- }
-
- if (cmd & 0x01) { /* write */
- if (copy_from_user(&data, (int *)arg, sizeof(int))) {
- return -EFAULT;
- }
- }
-
- switch (cmd) {
- case GIODRV_IOCSGIOSETADDR: /* addres set */
- addr = data;
- break;
-
- case GIODRV_IOCSGIODATA1: /* write byte */
- ctrl_outb((unsigned char)(0x0ff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA2: /* write word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- ctrl_outw((unsigned short int)(0x0ffff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA4: /* write long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- ctrl_outl(data, addr);
- break;
-
- case GIODRV_IOCGGIODATA1: /* read byte */
- data = ctrl_inb(addr);
- break;
-
- case GIODRV_IOCGGIODATA2: /* read word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- data = ctrl_inw(addr);
- break;
-
- case GIODRV_IOCGGIODATA4: /* read long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- data = ctrl_inl(addr);
- break;
- case GIODRV_IOCSGIO_LED: /* write */
- mask = ((data & 0x00ffffff) << 8)
- | ((data & 0x0000ffff) << 16)
- | ((data & 0x000000ff) << 24);
- landisk_ledparam = data & (~mask);
- if (landisk_arch == 0) { /* arch == landisk */
- landisk_ledparam &= 0x03030303;
- mask = (~(landisk_ledparam >> 22)) & 0x000c;
- landisk_ledparam |= mask;
- } else { /* arch == usl-5p */
- mask = (landisk_ledparam >> 24) & 0x0001;
- landisk_ledparam |= mask;
- landisk_ledparam &= 0x007f7f7f;
- }
- landisk_ledparam |= 0x80;
- break;
- case GIODRV_IOCGGIO_LED: /* read */
- data = landisk_ledparam;
- if (landisk_arch == 0) { /* arch == landisk */
- data &= 0x03030303;
- } else { /* arch == usl-5p */
- ;
- }
- data &= (~0x080);
- break;
- case GIODRV_IOCSGIO_BUZZER: /* write */
- landisk_buzzerparam = data;
- landisk_ledparam |= 0x80;
- break;
- case GIODRV_IOCGGIO_LANDISK: /* read */
- data = landisk_arch & 0x01;
- break;
- case GIODRV_IOCGGIO_BTN: /* read */
- data = (0x0ff & ctrl_inb(PA_PWRINT_CLR));
- data <<= 8;
- data |= (0x0ff & ctrl_inb(PA_IMASK));
- data <<= 8;
- data |= (0x0ff & landisk_btn);
- data <<= 8;
- data |= (0x0ff & (~ctrl_inb(PA_STATUS)));
- break;
- case GIODRV_IOCSGIO_BTNPID: /* write */
- landisk_btnctrlpid = data;
- landisk_btn = 0;
- if (irq_desc[IRQ_BUTTON].depth) {
- enable_irq(IRQ_BUTTON);
- }
- if (irq_desc[IRQ_POWER].depth) {
- enable_irq(IRQ_POWER);
- }
- break;
- case GIODRV_IOCGGIO_BTNPID: /* read */
- data = landisk_btnctrlpid;
- break;
- default:
- return -EFAULT;
- break;
- }
-
- if ((cmd & 0x01) == 0) { /* read */
- if (copy_to_user((int *)arg, &data, sizeof(int))) {
- return -EFAULT;
- }
- }
- return 0;
-}
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c
new file mode 100644
index 00000000000..5a9b70b5dec
--- /dev/null
+++ b/arch/sh/boards/landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007 Paul Mundt
+ * Copyright (C) 2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+ struct platform_device *pdev = arg;
+ struct push_switch *psw = platform_get_drvdata(pdev);
+ struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+ unsigned int sw_value;
+ int ret = 0;
+
+ sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+
+ /* Nothing to do if there's no state change */
+ if (psw->state) {
+ ret = 1;
+ goto out;
+ }
+
+ /* Figure out who raised it */
+ if (sw_value & (1 << psw_info->bit)) {
+ psw->state = 1;
+ mod_timer(&psw->debounce, jiffies + 50);
+ ret = 1;
+ }
+
+out:
+ /* Clear the switch IRQs */
+ ctrl_outb(0x00, PA_PWRINT_CLR);
+
+ return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+ [0] = {
+ .start = IRQ_POWER,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource psw_usl5p_resources[] = {
+ [0] = {
+ .start = IRQ_BUTTON,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+ .name = "psw_power",
+ .bit = 4,
+ .irq_flags = IRQF_SHARED,
+ .irq_handler = psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+ .name = "psw1",
+ .bit = 0,
+ .irq_flags = IRQF_SHARED,
+ .irq_handler = psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+ .name = "psw2",
+ .bit = 2,
+ .irq_flags = IRQF_SHARED,
+ .irq_handler = psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+ .name = "psw3",
+ .bit = 1,
+ .irq_flags = IRQF_SHARED,
+ .irq_handler = psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+ .name = "push-switch",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(psw_power_resources),
+ .resource = psw_power_resources,
+ .dev = {
+ .platform_data = &psw_power_platform_data,
+ },
+};
+
+static struct platform_device psw1_switch_device = {
+ .name = "push-switch",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(psw_usl5p_resources),
+ .resource = psw_usl5p_resources,
+ .dev = {
+ .platform_data = &psw1_platform_data,
+ },
+};
+
+static struct platform_device psw2_switch_device = {
+ .name = "push-switch",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(psw_usl5p_resources),
+ .resource = psw_usl5p_resources,
+ .dev = {
+ .platform_data = &psw2_platform_data,
+ },
+};
+
+static struct platform_device psw3_switch_device = {
+ .name = "push-switch",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(psw_usl5p_resources),
+ .resource = psw_usl5p_resources,
+ .dev = {
+ .platform_data = &psw3_platform_data,
+ },
+};
+
+static struct platform_device *psw_devices[] = {
+ &psw_power_switch_device,
+ &psw1_switch_device,
+ &psw2_switch_device,
+ &psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+ return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c
deleted file mode 100644
index 0a9a2a2ad05..00000000000
--- a/arch/sh/boards/landisk/rtc.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/sh/boards/landisk/rtc.c -- RTC support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- */
-/*
- * modifed by kogiidena
- * 2005.09.16
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <asm/rtc.h>
-
-extern spinlock_t rtc_lock;
-
-extern void
-rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon,
- unsigned int BCD_day, unsigned int BCD_hr,
- unsigned int BCD_min, unsigned int BCD_sec);
-
-extern unsigned long
-rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon,
- unsigned int *BCD_day, unsigned int *BCD_hr,
- unsigned int *BCD_min, unsigned int *BCD_sec);
-
-void landisk_rtc_gettimeofday(struct timespec *tv)
-{
- unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- tv->tv_sec = rs5c313_get_cmos_time
- (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
- tv->tv_nsec = 0;
- spin_unlock_irqrestore(&rtc_lock, flags);
-}
-
-int landisk_rtc_settimeofday(const time_t secs)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned long flags;
- unsigned long nowtime = secs;
- unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
-
- spin_lock_irqsave(&rtc_lock, flags);
-
- rs5c313_get_cmos_time
- (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
- cmos_minutes = BCD_min;
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr,
- real_minutes, real_seconds);
- } else {
- printk(KERN_WARNING
- "set_rtc_time: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- spin_unlock_irqrestore(&rtc_lock, flags);
- return retval;
-}
-
-void landisk_time_init(void)
-{
- rtc_sh_get_time = landisk_rtc_gettimeofday;
- rtc_sh_set_time = landisk_rtc_settimeofday;
-}
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
index 122d6996263..a83a5d9587b 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/landisk/setup.c
@@ -1,144 +1,90 @@
/*
* arch/sh/boards/landisk/setup.c
*
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- *
* I-O DATA Device, Inc. LANDISK Support.
*
- * Modified for LANDISK by
- * Atom Create Engineering Co., Ltd. 2002.
- *
- * modifed by kogiidena
- * 2005.09.16
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
#include <linux/pm.h>
#include <linux/mm.h>
#include <asm/machvec.h>
-#include <asm/rtc.h>
#include <asm/landisk/iodata_landisk.h>
#include <asm/io.h>
-void landisk_time_init(void);
void init_landisk_IRQ(void);
-int landisk_ledparam;
-int landisk_buzzerparam;
-int landisk_arch;
-
-/* cycle the led's in the clasic knightrider/sun pattern */
-static void heartbeat_landisk(void)
-{
- static unsigned int cnt = 0, blink = 0x00, period = 25;
- volatile u8 *p = (volatile u8 *)PA_LED;
- char data;
-
- if ((landisk_ledparam & 0x080) == 0)
- return;
-
- cnt += 1;
-
- if (cnt < period)
- return;
-
- cnt = 0;
- blink++;
-
- data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0;
- data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0;
- data |= landisk_ledparam;
-
- /* buzzer */
- if (landisk_buzzerparam & 0x1) {
- data |= 0x80;
- } else {
- data &= 0x7f;
- }
- *p = data;
-
- if (((landisk_ledparam & 0x007f7f00) == 0) &&
- (landisk_buzzerparam == 0))
- landisk_ledparam &= (~0x0080);
-
- landisk_buzzerparam >>= 1;
-}
-
static void landisk_power_off(void)
{
ctrl_outb(0x01, PA_SHUTDOWN);
}
-static void check_usl5p(void)
-{
- volatile u8 *p = (volatile u8 *)PA_LED;
- u8 tmp1, tmp2;
+static struct resource cf_ide_resources[3];
- tmp1 = *p;
- *p = 0x40;
- tmp2 = *p;
- *p = tmp1;
+static struct pata_platform_info pata_info = {
+ .ioport_shift = 1,
+};
- landisk_arch = (tmp2 == 0x40);
- if (landisk_arch == 1) {
- /* arch == usl-5p */
- landisk_ledparam = 0x00000380;
- landisk_ledparam |= (tmp1 & 0x07c);
- } else {
- /* arch == landisk */
- landisk_ledparam = 0x02000180;
- landisk_ledparam |= 0x04;
- }
-}
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+ .dev = {
+ .platform_data = &pata_info,
+ },
+};
-void *area5_io_base;
-void *area6_io_base;
+static struct platform_device *landisk_devices[] __initdata = {
+ &cf_ide_device,
+};
-static int __init landisk_cf_init(void)
+static int __init landisk_devices_setup(void)
{
pgprot_t prot;
- unsigned long paddrbase, psize;
+ unsigned long paddrbase;
+ void *cf_ide_base;
/* open I/O area window */
paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- psize = PAGE_SIZE;
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
- if (!area5_io_base) {
+ cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+ if (!cf_ide_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
}
- paddrbase = virt_to_phys((void *)PA_AREA6_IO);
- psize = PAGE_SIZE;
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
- area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
- if (!area6_io_base) {
- printk("allocate_cf_area : can't open HDD I/O window!\n");
- return -ENOMEM;
- }
-
- printk(KERN_INFO "Allocate Area5/6 success.\n");
-
- /* XXX : do we need attribute and common-memory area also? */
-
- return 0;
+ /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+ cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+ cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+ cf_ide_resources[0].flags = IORESOURCE_IO;
+ cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+ cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03;
+ cf_ide_resources[1].flags = IORESOURCE_IO;
+ cf_ide_resources[2].start = IRQ_FATA;
+ cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+ return platform_add_devices(landisk_devices,
+ ARRAY_SIZE(landisk_devices));
}
+__initcall(landisk_devices_setup);
+
static void __init landisk_setup(char **cmdline_p)
{
- device_initcall(landisk_cf_init);
-
- landisk_buzzerparam = 0;
- check_usl5p();
+ /* LED ON */
+ ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
-
- board_time_init = landisk_time_init;
pm_power_off = landisk_power_off;
}
@@ -148,29 +94,6 @@ static void __init landisk_setup(char **cmdline_p)
struct sh_machine_vector mv_landisk __initmv = {
.mv_name = "LANDISK",
.mv_setup = landisk_setup,
- .mv_nr_irqs = 72,
- .mv_inb = landisk_inb,
- .mv_inw = landisk_inw,
- .mv_inl = landisk_inl,
- .mv_outb = landisk_outb,
- .mv_outw = landisk_outw,
- .mv_outl = landisk_outl,
- .mv_inb_p = landisk_inb_p,
- .mv_inw_p = landisk_inw,
- .mv_inl_p = landisk_inl,
- .mv_outb_p = landisk_outb_p,
- .mv_outw_p = landisk_outw,
- .mv_outl_p = landisk_outl,
- .mv_insb = landisk_insb,
- .mv_insw = landisk_insw,
- .mv_insl = landisk_insl,
- .mv_outsb = landisk_outsb,
- .mv_outsw = landisk_outsw,
- .mv_outsl = landisk_outsl,
- .mv_ioport_map = landisk_ioport_map,
.mv_init_irq = init_landisk_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_landisk,
-#endif
};
ALIAS_MV(landisk)
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/lboxre2/Makefile
new file mode 100644
index 00000000000..e9ed140c06f
--- /dev/null
+++ b/arch/sh/boards/lboxre2/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the L-BOX RE2 specific parts of the kernel
+# Copyright (c) 2007 Nobuhiro Iwamatsu
+
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/lboxre2/irq.c
new file mode 100644
index 00000000000..5a1c3bbe7b5
--- /dev/null
+++ b/arch/sh/boards/lboxre2/irq.c
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/sh/boards/lboxre2/irq.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/lboxre2.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_lboxre2_IRQ(void)
+{
+ make_imask_irq(IRQ_CF1);
+ make_imask_irq(IRQ_CF0);
+ make_imask_irq(IRQ_INTD);
+ make_imask_irq(IRQ_ETH1);
+ make_imask_irq(IRQ_ETH0);
+ make_imask_irq(IRQ_INTA);
+}
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c
new file mode 100644
index 00000000000..4e20f7c63bf
--- /dev/null
+++ b/arch/sh/boards/lboxre2/setup.c
@@ -0,0 +1,85 @@
+/*
+ * linux/arch/sh/boards/lbox/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <asm/lboxre2.h>
+#include <asm/io.h>
+
+static struct resource cf_ide_resources[] = {
+ [0] = {
+ .start = 0x1f0,
+ .end = 0x1f0 + 8 ,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 0x1f0 + 0x206,
+ .end = 0x1f0 +8 + 0x206 + 8,
+ .flags = IORESOURCE_IO,
+ },
+ [2] = {
+ .start = IRQ_CF0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+};
+
+static struct platform_device *lboxre2_devices[] __initdata = {
+ &cf_ide_device,
+};
+
+static int __init lboxre2_devices_setup(void)
+{
+ u32 cf0_io_base; /* Boot CF base address */
+ pgprot_t prot;
+ unsigned long paddrbase, psize;
+
+ /* open I/O area window */
+ paddrbase = virt_to_phys((void*)PA_AREA5_IO);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16);
+ cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!cf0_io_base) {
+ printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
+ return -ENOMEM;
+ }
+
+ cf_ide_resources[0].start += cf0_io_base ;
+ cf_ide_resources[0].end += cf0_io_base ;
+ cf_ide_resources[1].start += cf0_io_base ;
+ cf_ide_resources[1].end += cf0_io_base ;
+
+ return platform_add_devices(lboxre2_devices,
+ ARRAY_SIZE(lboxre2_devices));
+
+}
+device_initcall(lboxre2_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_lboxre2 __initmv = {
+ .mv_name = "L-BOX RE2",
+ .mv_nr_irqs = 72,
+ .mv_init_irq = init_lboxre2_IRQ,
+};
+ALIAS_MV(lboxre2)
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
index c26d9813d23..9fb11641fe1 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -1,14 +1,24 @@
-if SH_R7780RP
+if SH_HIGHLANDER
-menu "R7780RP options"
+choice
+ prompt "Highlander options"
+ default SH_R7780MP
+
+config SH_R7780RP
+ bool "R7780RP-1 board support"
+ select CPU_SUBTYPE_SH7780
config SH_R7780MP
bool "R7780MP board support"
- default y
+ select CPU_SUBTYPE_SH7780
help
Selecting this option will enable support for the mass-production
version of the R7780RP. If in doubt, say Y.
-endmenu
+config SH_R7785RP
+ bool "R7785RP board support"
+ select CPU_SUBTYPE_SH7785
+
+endchoice
endif
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index ed5f5a9a3b3..609e5d50dde 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the R7780RP-1 specific parts of the kernel
#
-
-obj-y := setup.o irq.o
-
+irqinit-y := irq-r7780rp.o
+irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o
obj-$(CONFIG_PUSH_SWITCH) += psw.o
+obj-y := setup.o irq.o $(irqinit-y)
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
new file mode 100644
index 00000000000..f5f358746c9
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
@@ -0,0 +1,21 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/r7780rp.h>
+
+void __init highlander_init_irq(void)
+{
+ int i;
+
+ for (i = 0; i < 15; i++)
+ make_r7780rp_irq(i);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
new file mode 100644
index 00000000000..dd6ec4ce44d
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
@@ -0,0 +1,29 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/r7780rp.h>
+
+void __init highlander_init_irq(void)
+{
+ ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
+
+ /* Setup the FPGA IRL */
+ ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */
+ ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */
+ ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */
+ ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */
+ ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
+ ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */
+
+ make_r7780rp_irq(1); /* CF card */
+ make_r7780rp_irq(10); /* On-board ethernet */
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
index cc381e19778..e0b8eb52f37 100644
--- a/arch/sh/boards/renesas/r7780rp/irq.c
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -14,10 +14,12 @@
#include <linux/io.h>
#include <asm/r7780rp.h>
-#ifdef CONFIG_SH_R7780MP
-static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
-#else
+#ifdef CONFIG_SH_R7780RP
static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
+#elif defined(CONFIG_SH_R7780MP)
+static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
+#elif defined(CONFIG_SH_R7785RP)
+static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2};
#endif
static void enable_r7780rp_irq(unsigned int irq)
@@ -40,17 +42,10 @@ static struct irq_chip r7780rp_irq_chip __read_mostly = {
.mask_ack = disable_r7780rp_irq,
};
-/*
- * Initialize IRQ setting
- */
-void __init init_r7780rp_IRQ(void)
+void make_r7780rp_irq(unsigned int irq)
{
- int i;
-
- for (i = 0; i < 15; i++) {
- disable_irq_nosync(i);
- set_irq_chip_and_handler_name(i, &r7780rp_irq_chip,
- handle_level_irq, "level");
- enable_r7780rp_irq(i);
- }
+ disable_irq_nosync(irq);
+ set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip,
+ handle_level_irq, "level");
+ enable_r7780rp_irq(irq);
}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 2faba6679e6..0727ef92f2b 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -1,10 +1,13 @@
/*
* arch/sh/boards/renesas/r7780rp/setup.c
*
+ * Renesas Solutions Highlander Support.
+ *
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2005 - 2007 Paul Mundt
*
- * Renesas Solutions Highlander R7780RP-1 Support.
+ * This contains support for the R7780RP-1, R7780MP, and R7785RP
+ * Highlander modules.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -18,32 +21,6 @@
#include <asm/clock.h>
#include <asm/io.h>
-extern void init_r7780rp_IRQ(void);
-
-static struct resource m66596_usb_host_resources[] = {
- [0] = {
- .start = 0xa4800000,
- .end = 0xa4ffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 6, /* irq number */
- .end = 6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66596_usb_host_device = {
- .name = "m66596-hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(m66596_usb_host_resources),
- .resource = m66596_usb_host_resources,
-};
-
static struct resource cf_ide_resources[] = {
[0] = {
.start = PA_AREA5_IO + 0x1000,
@@ -56,10 +33,10 @@ static struct resource cf_ide_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
-#ifdef CONFIG_SH_R7780MP
- .start = 1,
-#else
+#ifdef CONFIG_SH_R7780RP
.start = 4,
+#else
+ .start = 1,
#endif
.flags = IORESOURCE_IRQ,
},
@@ -92,15 +69,18 @@ static struct resource heartbeat_resources[] = {
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
+
+ /* R7785RP has a slightly more sensible FPGA.. */
+#ifndef CONFIG_SH_R7785RP
.dev = {
.platform_data = heartbeat_bit_pos,
},
+#endif
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *r7780rp_devices[] __initdata = {
- &m66596_usb_host_device,
&cf_ide_device,
&heartbeat_device,
};
@@ -110,18 +90,19 @@ static int __init r7780rp_devices_setup(void)
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
+device_initcall(r7780rp_devices_setup);
/*
* Platform specific clocks
*/
static void ivdr_clk_enable(struct clk *clk)
{
- ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL);
+ ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
}
static void ivdr_clk_disable(struct clk *clk)
{
- ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL);
+ ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
}
static struct clk_ops ivdr_clk_ops = {
@@ -140,22 +121,22 @@ static struct clk *r7780rp_clocks[] = {
static void r7780rp_power_off(void)
{
-#ifdef CONFIG_SH_R7780MP
- ctrl_outw(0x0001, PA_POFF);
-#endif
+ if (mach_is_r7780mp() || mach_is_r7785rp())
+ ctrl_outw(0x0001, PA_POFF);
}
/*
* Initialize the board
*/
-static void __init r7780rp_setup(char **cmdline_p)
+static void __init highlander_setup(char **cmdline_p)
{
u16 ver = ctrl_inw(PA_VERREG);
int i;
- device_initcall(r7780rp_devices_setup);
-
- printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+ printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
+ mach_is_r7780rp() ? "R7780RP-1" :
+ mach_is_r7780mp() ? "R7780MP" :
+ "R7785RP");
printk(KERN_INFO "Board version: %d (revision %d), "
"FPGA version: %d (revision %d)\n",
@@ -173,9 +154,10 @@ static void __init r7780rp_setup(char **cmdline_p)
}
ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
-#ifndef CONFIG_SH_R7780MP
- ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
-#endif
+
+ if (mach_is_r7780rp())
+ ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
+
ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
pm_power_off = r7780rp_power_off;
@@ -184,10 +166,10 @@ static void __init r7780rp_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_r7780rp __initmv = {
- .mv_name = "Highlander R7780RP-1",
- .mv_setup = r7780rp_setup,
+struct sh_machine_vector mv_highlander __initmv = {
+ .mv_name = "Highlander",
.mv_nr_irqs = 109,
- .mv_init_irq = init_r7780rp_IRQ,
+ .mv_setup = highlander_setup,
+ .mv_init_irq = highlander_init_irq,
};
-ALIAS_MV(r7780rp)
+ALIAS_MV(highlander)
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
index 9941949331a..c4550473d4c 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/se/770x/io.c
@@ -27,6 +27,8 @@ int sh_pcic_io_dummy;
static inline volatile __u16 *
port2adr(unsigned int port)
{
+ if (port & 0xff000000)
+ return ( volatile __u16 *) port;
if (port >= 0x2000)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
else if (port >= 0x1000)
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
index 307ca5da623..c8eccff77a0 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/se/770x/irq.c
@@ -55,23 +55,34 @@ void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
}
static struct ipr_data se770x_ipr_map[] = {
+ /*
+ * Super I/O (Just mimic PC):
+ * 1: keyboard
+ * 3: serial 0
+ * 4: serial 1
+ * 5: printer
+ * 6: floppy
+ * 8: rtc
+ * 12: mouse
+ * 14: ide0
+ */
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* This is default value */
- { 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA},
- { 0xf-0xa, 0, 4, 0xa , BCR_ILCRA},
- { 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB},
- { 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC},
- { 0xf-0xc, 0, 0, 0xc , BCR_ILCRC},
- { 0xf-0xe, 0, 12, 0xe , BCR_ILCRD},
- { 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */
- { 0xf-0xd, 0, 8, 0xd , BCR_ILCRE},
- { 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE},
- { 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE},
- { 0xf-0xf, 0, 12, 0xf , BCR_ILCRF},
- { 0xf-0xb, 0, 4, 0xb , BCR_ILCRF},
- { 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG},
- { 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG},
- { 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG},
+ { 13, 0, 8, 0x0f-13 ,BCR_ILCRA},
+ { 5 , 0, 4, 0x0f- 5 ,BCR_ILCRA},
+ { 10, 0, 0, 0x0f-10, BCR_ILCRB},
+ { 7 , 0, 4, 0x0f- 7, BCR_ILCRC},
+ { 3 , 0, 0, 0x0f- 3, BCR_ILCRC},
+ { 1 , 0, 12, 0x0f- 1, BCR_ILCRD},
+ { 12, 0, 4, 0x0f-12, BCR_ILCRD}, /* LAN */
+ { 2 , 0, 8, 0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */
+ { 6 , 0, 4, 0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */
+ { 14, 0, 0, 0x0f-14, BCR_ILCRE}, /* PCIRQ0 */
+ { 0 , 0, 12, 0x0f , BCR_ILCRF},
+ { 4 , 0, 4, 0x0f- 4, BCR_ILCRF},
+ { 8 , 0, 12, 0x0f- 8, BCR_ILCRG},
+ { 9 , 0, 8, 0x0f- 9, BCR_ILCRG},
+ { 11, 0, 4, 0x0f-11, BCR_ILCRG},
#else
{ 14, 0, 8, 0x0f-14 ,BCR_ILCRA},
{ 12, 0, 4, 0x0f-12 ,BCR_ILCRA},
@@ -81,8 +92,10 @@ static struct ipr_data se770x_ipr_map[] = {
{ 4, 0, 4, 0x0f- 4 ,BCR_ILCRC},
{ 3, 0, 0, 0x0f- 3 ,BCR_ILCRC},
{ 1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+#if defined(CONFIG_STNIC)
/* ST NIC */
{ 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */
+#endif
/* MRSHPC IRQs setting */
{ 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */
{ 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */
@@ -100,18 +113,6 @@ static struct ipr_data se770x_ipr_map[] = {
*/
void __init init_se_IRQ(void)
{
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* Disable all interrupts */
ctrl_outw(0, BCR_ILCRA);
ctrl_outw(0, BCR_ILCRB);
@@ -120,6 +121,6 @@ void __init init_se_IRQ(void)
ctrl_outw(0, BCR_ILCRE);
ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG);
-#endif
+
make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
}
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 45cbc36b9fb..17a2631de3b 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -63,6 +63,31 @@ static void __init smsc_setup(char **cmdline_p)
outb_p(CONFIG_EXIT, CONFIG_PORT);
}
+
+static struct resource cf_ide_resources[] = {
+ [0] = {
+ .start = PA_MRSHPC_IO + 0x1f0,
+ .end = PA_MRSHPC_IO + 0x1f0 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
+ .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_CFCARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+};
+
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
@@ -85,13 +110,14 @@ static struct platform_device heartbeat_device = {
static struct platform_device *se_devices[] __initdata = {
&heartbeat_device,
+ &cf_ide_device,
};
static int __init se_devices_setup(void)
{
return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
}
-__initcall(se_devices_setup);
+device_initcall(se_devices_setup);
/*
* The Machine Vector
@@ -107,6 +133,8 @@ struct sh_machine_vector mv_se __initmv = {
.mv_nr_irqs = 61,
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
.mv_nr_irqs = 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+ .mv_nr_irqs = 104,
#endif
.mv_inb = se_inb,
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/se/7722/Makefile
new file mode 100644
index 00000000000..8694373389e
--- /dev/null
+++ b/arch/sh/boards/se/7722/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
new file mode 100644
index 00000000000..099e5deb77f
--- /dev/null
+++ b/arch/sh/boards/se/7722/irq.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/sh/boards/se/7722/irq.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/se7722.h>
+
+#define INTC_INTMSK0 0xFFD00044
+#define INTC_INTMSKCLR0 0xFFD00064
+
+static void disable_se7722_irq(unsigned int irq)
+{
+ struct ipr_data *p = get_irq_chip_data(irq);
+ ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr );
+}
+
+static void enable_se7722_irq(unsigned int irq)
+{
+ struct ipr_data *p = get_irq_chip_data(irq);
+ ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr );
+}
+
+static struct irq_chip se7722_irq_chip __read_mostly = {
+ .name = "SE7722",
+ .mask = disable_se7722_irq,
+ .unmask = enable_se7722_irq,
+ .mask_ack = disable_se7722_irq,
+};
+
+static struct ipr_data ipr_irq_table[] = {
+ /* irq ,idx,sft, priority , addr */
+ { MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } ,
+ { MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } ,
+ { MRSHPC_IRQ2 , 0 , 0 , MRSHPC_BIT2 , IRQ01_MASK } ,
+ { MRSHPC_IRQ3 , 0 , 0 , MRSHPC_BIT3 , IRQ01_MASK } ,
+ { SMC_IRQ , 0 , 0 , SMC_BIT , IRQ01_MASK } ,
+ { EXT_IRQ , 0 , 0 , EXT_BIT , IRQ01_MASK } ,
+};
+
+int se7722_irq_demux(int irq)
+{
+
+ if ((irq == IRQ0_IRQ)||(irq == IRQ1_IRQ)) {
+ volatile unsigned short intv =
+ *(volatile unsigned short *)IRQ01_STS;
+ if (irq == IRQ0_IRQ){
+ if(intv & SMC_BIT ) {
+ return SMC_IRQ;
+ } else if(intv & USB_BIT) {
+ return USB_IRQ;
+ } else {
+ printk("intv =%04x\n", intv);
+ return SMC_IRQ;
+ }
+ } else if(irq == IRQ1_IRQ){
+ if(intv & MRSHPC_BIT0) {
+ return MRSHPC_IRQ0;
+ } else if(intv & MRSHPC_BIT1) {
+ return MRSHPC_IRQ1;
+ } else if(intv & MRSHPC_BIT2) {
+ return MRSHPC_IRQ2;
+ } else if(intv & MRSHPC_BIT3) {
+ return MRSHPC_IRQ3;
+ } else {
+ printk("BIT_EXTENTION =%04x\n", intv);
+ return EXT_IRQ;
+ }
+ }
+ }
+ return irq;
+
+}
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7722_IRQ(void)
+{
+ int i = 0;
+ ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ ctrl_outl((3 << ((7 - 0) * 4))|(3 << ((7 - 1) * 4)), INTC_INTPRI0); /* irq0 pri=3,irq1,pri=3 */
+ ctrl_outw((2 << ((7 - 0) * 2))|(2 << ((7 - 1) * 2)), INTC_ICR1); /* irq0,1 low-level irq */
+
+ for (i = 0; i < ARRAY_SIZE(ipr_irq_table); i++) {
+ disable_irq_nosync(ipr_irq_table[i].irq);
+ set_irq_chip_and_handler_name( ipr_irq_table[i].irq, &se7722_irq_chip,
+ handle_level_irq, "level");
+ set_irq_chip_data( ipr_irq_table[i].irq, &ipr_irq_table[i] );
+ disable_se7722_irq(ipr_irq_table[i].irq);
+ }
+}
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
new file mode 100644
index 00000000000..636ca6c987e
--- /dev/null
+++ b/arch/sh/boards/se/7722/setup.c
@@ -0,0 +1,148 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+#include <asm/machvec.h>
+#include <asm/se7722.h>
+#include <asm/io.h>
+
+/* Heartbeat */
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+ [0] = {
+ .name = "smc91x-regs" ,
+ .start = PA_LAN + 0x300,
+ .end = PA_LAN + 0x300 + 0x10 ,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC_IRQ,
+ .end = SMC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_eth_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* don't use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_eth_resources),
+ .resource = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+ [0] = {
+ .start = PA_MRSHPC_IO + 0x1f0,
+ .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
+ .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+ .flags = IORESOURCE_IO,
+ },
+ [2] = {
+ .start = MRSHPC_IRQ0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+ &heartbeat_device,
+ &smc91x_eth_device,
+ &cf_ide_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+ return platform_add_devices(se7722_devices,
+ ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+ ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
+
+ ctrl_outl(0x00051001, MSTPCR0);
+ ctrl_outl(0x00000000, MSTPCR1);
+ /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
+ ctrl_outl(0xffffbfC0, MSTPCR2);
+
+ ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
+ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+ /* LCDC I/O */
+ ctrl_outw(0x0020, PORT_PSELD);
+
+ /* SIOF1*/
+ ctrl_outw(0x0003, PORT_PSELB);
+ ctrl_outw(0xe000, PORT_PSELC);
+ ctrl_outw(0x0000, PORT_PKCR);
+
+ /* LCDC */
+ ctrl_outw(0x4020, PORT_PHCR);
+ ctrl_outw(0x0000, PORT_PLCR);
+ ctrl_outw(0x0000, PORT_PMCR);
+ ctrl_outw(0x0002, PORT_PRCR);
+ ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */
+
+ /* KEYSC */
+ ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+ ctrl_outw(0x0000, PORT_PYCR);
+ ctrl_outw(0x0000, PORT_PZCR);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7722 __initmv = {
+ .mv_name = "Solution Engine 7722" ,
+ .mv_setup = se7722_setup ,
+ .mv_nr_irqs = 109 ,
+ .mv_init_irq = init_se7722_IRQ,
+ .mv_irq_demux = se7722_irq_demux,
+
+};
+ALIAS_MV(se7722)
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index e3feae6ec0b..770defed9c4 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -14,153 +14,6 @@
#include <asm/se7751.h>
#include <asm/io.h>
-void init_7751se_IRQ(void);
-
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_uart_setup(void);
-static struct kgdb_sermap kgdb_uart_sermap =
-{ "ttyS", 0, kgdb_uart_setup, NULL };
-#endif
-
-/*
- * Initialize the board
- */
-static void __init sh7751se_setup(char **cmdline_p)
-{
- /* Call init_smsc() replacement to set up SuperIO. */
- /* XXX: RTC setting comes here */
-#ifdef CONFIG_SH_KGDB
- kgdb_register_sermap(&kgdb_uart_sermap);
-#endif
-}
-
-/*********************************************************************
- * Currently a hack (e.g. does not interact well w/serial.c, lots of *
- * hardcoded stuff) but may be useful if SCI/F needs debugging. *
- * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and *
- * arch/i386/lib/kgdb_serial.c). *
- *********************************************************************/
-
-#ifdef CONFIG_SH_KGDB
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#define COM1_PORT 0x3f8 /* Base I/O address */
-#define COM1_IRQ 4 /* IRQ not used yet */
-#define COM2_PORT 0x2f8 /* Base I/O address */
-#define COM2_IRQ 3 /* IRQ not used yet */
-
-#define SB_CLOCK 1843200 /* Serial baud clock */
-#define SB_BASE (SB_CLOCK/16)
-#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
-
-struct uart_port {
- int base;
-};
-#define UART_NPORTS 2
-struct uart_port uart_ports[] = {
- { COM1_PORT },
- { COM2_PORT },
-};
-struct uart_port *kgdb_uart_port;
-
-#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg)
-#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg)
-
-/* Basic read/write functions for the UART */
-#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
-static int kgdb_uart_getchar(void)
-{
- int lsr;
- int c = -1;
-
- while (c == -1) {
- lsr = UART_IN(UART_LSR);
- if (lsr & UART_LSR_DR)
- c = UART_IN(UART_RX);
- if ((lsr & UART_LSR_RXCERR))
- c = -1;
- }
- return c;
-}
-
-static void kgdb_uart_putchar(int c)
-{
- while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
- ;
- UART_OUT(UART_TX, c);
-}
-
-/*
- * Initialize UART to configured/requested values.
- * (But we don't interrupts yet, or interact w/serial.c)
- */
-static int kgdb_uart_setup(void)
-{
- int port;
- int lcr = 0;
- int bdiv = 0;
-
- if (kgdb_portnum >= UART_NPORTS) {
- KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
- return -1;
- }
-
- kgdb_uart_port = &uart_ports[kgdb_portnum];
-
- /* Init sequence from gdb_hook_interrupt */
- UART_IN(UART_RX);
- UART_OUT(UART_IER, 0);
-
- UART_IN(UART_RX); /* Serial driver comments say */
- UART_IN(UART_IIR); /* this clears interrupt regs */
- UART_IN(UART_MSR);
-
- /* Figure basic LCR values */
- switch (kgdb_bits) {
- case '7':
- lcr |= UART_LCR_WLEN7;
- break;
- default: case '8':
- lcr |= UART_LCR_WLEN8;
- break;
- }
- switch (kgdb_parity) {
- case 'O':
- lcr |= UART_LCR_PARITY;
- break;
- case 'E':
- lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
- break;
- default: break;
- }
-
- /* Figure the baud rate divisor */
- bdiv = (SB_BASE/kgdb_baud);
-
- /* Set the baud rate and LCR values */
- UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
- UART_OUT(UART_DLL, (bdiv & 0xff));
- UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
- UART_OUT(UART_LCR, lcr);
-
- /* Set the MCR */
- UART_OUT(UART_MCR, SB_MCR);
-
- /* Turn off FIFOs for now */
- UART_OUT(UART_FCR, 0);
-
- /* Setup complete: initialize function pointers */
- kgdb_getchar = kgdb_uart_getchar;
- kgdb_putchar = kgdb_uart_putchar;
-
- return 0;
-}
-#endif /* CONFIG_SH_KGDB */
-
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
@@ -197,7 +50,6 @@ __initcall(se7751_devices_setup);
*/
struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
- .mv_setup = sh7751se_setup,
.mv_nr_irqs = 72,
.mv_inb = sh7751se_inb,
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/se/7780/Makefile
new file mode 100644
index 00000000000..6b88adae3ec
--- /dev/null
+++ b/arch/sh/boards/se/7780/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
new file mode 100644
index 00000000000..3d0625c2d07
--- /dev/null
+++ b/arch/sh/boards/se/7780/irq.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/se7780.h>
+
+#define INTC_INTMSK0 0xFFD00044
+#define INTC_INTMSKCLR0 0xFFD00064
+
+static void disable_se7780_irq(unsigned int irq)
+{
+ struct intc2_data *p = get_irq_chip_data(irq);
+ ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
+}
+
+static void enable_se7780_irq(unsigned int irq)
+{
+ struct intc2_data *p = get_irq_chip_data(irq);
+ ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
+}
+
+static struct irq_chip se7780_irq_chip __read_mostly = {
+ .name = "SE7780",
+ .mask = disable_se7780_irq,
+ .unmask = enable_se7780_irq,
+ .mask_ack = disable_se7780_irq,
+};
+
+static struct intc2_data intc2_irq_table[] = {
+ { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
+ { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
+ { 6, 0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */
+ { 8, 0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */
+ { 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */
+ { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */
+ { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */
+ { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */
+ { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */
+ { 0 , 0, 24, 0, 24, 3 }, /* SM501 */
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+ int i ;
+
+ /* enable all interrupt at FPGA */
+ ctrl_outw(0, FPGA_INTMSK1);
+ /* mask SM501 interrupt */
+ ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+ /* enable all interrupt at FPGA */
+ ctrl_outw(0, FPGA_INTMSK2);
+
+ /* set FPGA INTSEL register */
+ /* FPGA + 0x06 */
+ ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+ (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+ /* FPGA + 0x08 */
+ ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+ (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+ (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+ (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+ /* FPGA + 0x0A */
+ ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+ for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
+ disable_irq_nosync(intc2_irq_table[i].irq);
+ set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
+ handle_level_irq, "level");
+ set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
+ disable_se7780_irq(intc2_irq_table[i].irq);
+ }
+}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
new file mode 100644
index 00000000000..df7d08a24c9
--- /dev/null
+++ b/arch/sh/boards/se/7780/setup.c
@@ -0,0 +1,122 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se7780.h>
+#include <asm/io.h>
+
+/* Heartbeat */
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+ [0] = {
+ .name = "smc91x-regs" ,
+ .start = PA_LAN + 0x300,
+ .end = PA_LAN + 0x300 + 0x10 ,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC_IRQ,
+ .end = SMC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_eth_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* don't use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_eth_resources),
+ .resource = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+ &heartbeat_device,
+ &smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+ return platform_add_devices(se7780_devices,
+ ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR 0xFFEA000E
+#define GPIO_PMSELR 0xFFEA0080
+#define GPIO_PECR 0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+ /* "SH-Linux" on LED Display */
+ ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+ ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+ ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+ ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+ ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+ ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+ ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+ ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+ printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+ /*
+ * PCI REQ/GNT setting
+ * REQ0/GNT0 -> USB
+ * REQ1/GNT1 -> PC Card
+ * REQ2/GNT2 -> Serial ATA
+ * REQ3/GNT3 -> PCI slot
+ */
+ ctrl_outw(0x0213, FPGA_REQSEL);
+
+ /* GPIO setting */
+ ctrl_outw(0x0000, GPIO_PECR);
+ ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+ ctrl_outw(0x0c00, GPIO_PMSELR);
+
+ /* iVDR Power ON */
+ ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7780 __initmv = {
+ .mv_name = "Solution Engine 7780" ,
+ .mv_setup = se7780_setup ,
+ .mv_nr_irqs = 111 ,
+ .mv_init_irq = init_se7780_IRQ,
+};
+ALIAS_MV(se7780)
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
new file mode 100644
index 00000000000..be86414dcc8
--- /dev/null
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -0,0 +1,1271 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc4
+# Sat Mar 24 22:04:27 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+CONFIG_SH_LBOX_RE2=y
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=40000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_DEBUG=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=y
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig
index 2b75b4896ba..48c6a2194c9 100644
--- a/arch/sh/configs/r7780rp_defconfig
+++ b/arch/sh/configs/r7780rp_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Wed Dec 6 11:59:38 2006
+# Linux kernel version: 2.6.21-rc7
+# Tue May 1 12:28:39 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -13,6 +14,8 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -31,6 +34,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -41,7 +45,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -99,23 +103,23 @@ CONFIG_DEFAULT_IOSCHED="noop"
# System type
#
# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7722_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
# CONFIG_SH_SATURN is not set
# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
# CONFIG_SH_MPC1211 is not set
# CONFIG_SH_SH03 is not set
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_7710VOIPGW is not set
# CONFIG_SH_RTS7751R2D is not set
-CONFIG_SH_R7780RP=y
+CONFIG_SH_HIGHLANDER=y
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_LANDISK is not set
@@ -123,7 +127,11 @@ CONFIG_SH_R7780RP=y
# CONFIG_SH_SHMIN is not set
# CONFIG_SH_7206_SOLUTION_ENGINE is not set
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
# CONFIG_SH_UNKNOWN is not set
+CONFIG_SH_R7780RP=y
+# CONFIG_SH_R7780MP is not set
+# CONFIG_SH_R7785RP is not set
#
# Processor selection
@@ -152,6 +160,7 @@ CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
#
# SH-4 Processor Support
@@ -183,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
@@ -193,6 +203,8 @@ CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
# CONFIG_32BIT is not set
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -210,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
#
# Cache configuration
@@ -226,20 +239,15 @@ CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
#
-# Timer support
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
-
-#
-# R7780RP options
-#
-CONFIG_SH_R7780MP=y
CONFIG_SH_TIMER_IRQ=28
CONFIG_NO_IDLE_HZ=y
CONFIG_SH_PCLK_FREQ=32000000
@@ -262,6 +270,7 @@ CONFIG_SH_PCLK_FREQ=32000000
#
# Additional SuperH Device Drivers
#
+# CONFIG_HEARTBEAT is not set
CONFIG_PUSH_SWITCH=y
#
@@ -269,9 +278,11 @@ CONFIG_PUSH_SWITCH=y
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
@@ -294,7 +305,6 @@ CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
@@ -334,6 +344,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -425,6 +436,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -445,6 +457,7 @@ CONFIG_FW_LOADER=m
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -461,7 +474,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -481,6 +493,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -500,6 +513,7 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
@@ -544,11 +558,13 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
@@ -564,6 +580,7 @@ CONFIG_SATA_SIL=y
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -579,6 +596,7 @@ CONFIG_SATA_SIL=y
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
@@ -685,6 +703,7 @@ CONFIG_8139TOO_8129=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
+# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
@@ -707,11 +726,13 @@ CONFIG_R8169=y
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
@@ -889,10 +910,16 @@ CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -905,9 +932,8 @@ CONFIG_HWMON=y
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
#
# Sound
@@ -923,9 +949,8 @@ CONFIG_SOUND=m
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
+# CONFIG_OBSOLETE_OSS is not set
# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
@@ -933,6 +958,12 @@ CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_VIA82CXXX is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1017,6 +1048,14 @@ CONFIG_RTC_DRV_SH=y
#
#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1175,6 +1214,11 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
CONFIG_PROFILING=y
@@ -1184,19 +1228,22 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
+# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1204,19 +1251,19 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_FRAME_POINTER is not set
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
@@ -1233,6 +1280,7 @@ CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
@@ -1241,9 +1289,13 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1257,6 +1309,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
@@ -1266,7 +1319,10 @@ CONFIG_CRYPTO_DES=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
new file mode 100644
index 00000000000..0f5ec649daf
--- /dev/null
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -0,0 +1,1334 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc3
+# Mon Mar 12 14:26:33 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_UNKNOWN is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_R7780MP is not set
+CONFIG_SH_R7785RP=y
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_32BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_NO_IDLE_HZ=y
+CONFIG_SH_PCLK_FREQ=50000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+CONFIG_PUSH_SWITCH=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OBSOLETE_OSS is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 06ebd6ec0cd..87ae5c1f862 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,15 +1,21 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 12:03:04 2006
+# Linux kernel version: 2.6.21-rc5
+# Thu Apr 26 09:16:31 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -33,7 +39,9 @@ CONFIG_LOCALVERSION_AUTO=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -91,27 +99,30 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_SOLUTION_ENGINE=y
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7722_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
# CONFIG_SH_SATURN is not set
# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
# CONFIG_SH_MPC1211 is not set
# CONFIG_SH_SH03 is not set
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_7710VOIPGW is not set
# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_HIGHLANDER is not set
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
# CONFIG_SH_UNKNOWN is not set
#
@@ -123,6 +134,12 @@ CONFIG_CPU_SH3=y
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
#
# SH-3 Processor Support
@@ -134,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
#
# SH-4 Processor Support
@@ -158,12 +176,14 @@ CONFIG_CPU_SUBTYPE_SH7705=y
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
#
# SH4AL-DSP Processor Support
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
@@ -173,6 +193,11 @@ CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x02000000
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -182,6 +207,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
#
# Cache configuration
@@ -190,23 +216,31 @@ CONFIG_SH7705_CACHE_32KB=y
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+# CONFIG_CF_AREA4 is not set
+CONFIG_CF_BASE_ADDR=0xb8000000
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
# CONFIG_SH_ADC is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_PINT_IRQ=y
+CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
#
-# Timer support
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
#
@@ -223,13 +257,19 @@ CONFIG_SH_PCLK_FREQ=33333333
# Companion Chips
#
# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
@@ -287,6 +327,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -307,11 +348,13 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
@@ -388,6 +431,7 @@ CONFIG_MTD_PARTITIONS=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
@@ -461,6 +505,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -472,11 +517,14 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
+# Misc devices
+#
+
+#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
@@ -649,17 +697,12 @@ CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -675,6 +718,7 @@ CONFIG_HW_RANDOM=y
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -683,18 +727,19 @@ CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -704,7 +749,7 @@ CONFIG_VIDEO_V4L2=y
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
#
@@ -713,6 +758,12 @@ CONFIG_FIRMWARE_EDID=y
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
@@ -773,16 +824,26 @@ CONFIG_FIRMWARE_EDID=y
#
#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -828,7 +889,6 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -878,6 +938,10 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -885,15 +949,18 @@ CONFIG_MSDOS_PARTITION=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_KGDB is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
@@ -908,6 +975,7 @@ CONFIG_LOG_BUF_SHIFT=14
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -915,3 +983,5 @@ CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
new file mode 100644
index 00000000000..a5e37dbc535
--- /dev/null
+++ b/arch/sh/configs/se7712_defconfig
@@ -0,0 +1,1088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc4
+# Wed Mar 28 10:19:02 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+CONFIG_CPU_SUBTYPE_SH7712=y
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_SCH_DSMARK=y
+CONFIG_NET_SCH_NETEM=y
+CONFIG_NET_SCH_INGRESS=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=y
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
new file mode 100644
index 00000000000..ca4c663dfa3
--- /dev/null
+++ b/arch/sh/configs/se7722_defconfig
@@ -0,0 +1,980 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc7
+# Fri Apr 27 16:30:30 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+CONFIG_SH_7722_SOLUTION_ENGINE=y
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SH4AL_DSP=y
+CONFIG_CPU_SHX2=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+CONFIG_CPU_SUBTYPE_SH7722=y
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+# CONFIG_32BIT is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_NO_IDLE_HZ=y
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
new file mode 100644
index 00000000000..538661e9879
--- /dev/null
+++ b/arch/sh/configs/se7780_defconfig
@@ -0,0 +1,1309 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 15 14:06:20 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+CONFIG_SH_7780_SOLUTION_ENGINE=y
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_32BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00810000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
index c54c758e624..420c6b2f33a 100644
--- a/arch/sh/drivers/Kconfig
+++ b/arch/sh/drivers/Kconfig
@@ -1,5 +1,15 @@
+source "arch/sh/drivers/dma/Kconfig"
+source "arch/sh/cchips/Kconfig"
+
menu "Additional SuperH Device Drivers"
+config HEARTBEAT
+ bool "Heartbeat LED"
+ help
+ Use the power-on LED on your machine as a load meter. The exact
+ behavior is platform-dependent, but normally the flash frequency is
+ a hyperbolic function of the 5-minute load average.
+
config PUSH_SWITCH
tristate "Push switch support"
help
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index bc59cb6cd78..23dd6080422 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -40,16 +40,9 @@ static void heartbeat_timer(unsigned long data)
static unsigned bit = 0, up = 1;
ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base);
- if (up)
- if (bit == (ARRAY_SIZE(hd->bit_pos) - 1)) {
- bit--;
- up = 0;
- } else
- bit++;
- else if (bit == 0)
- up = 1;
- else
- bit--;
+ bit += up;
+ if ((bit == 0) || (bit == ARRAY_SIZE(hd->bit_pos)-1))
+ up = -up;
mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
((avenrun[0] / 5) + (3 << FSHIFT)))));
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index cc8d0d0b142..0e9b532b9fb 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -8,12 +8,15 @@ obj-$(CONFIG_PCI_AUTO) += pci-auto.o
obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
dma-dreamcast.o
obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o
obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o
obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o
-obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o
+obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o
obj-$(CONFIG_SH_TITAN) += ops-titan.o
obj-$(CONFIG_SH_LANDISK) += ops-landisk.o
+obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c
new file mode 100644
index 00000000000..40b19bdfb89
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-lboxre2.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/drivers/pci/fixups-lboxre2.c
+ *
+ * L-BOX RE2 PCI fixups
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include "pci-sh4.h"
+
+#define PCIMCR_MRSET_OFF 0xBFFFFFFF
+#define PCIMCR_RFSH_OFF 0xFFFFFFFB
+
+int pci_fixup_pcic(void)
+{
+ unsigned long bcr1, mcr;
+
+ bcr1 = inl(SH7751_BCR1);
+ bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ pci_write_reg(bcr1, SH4_PCIBCR1);
+
+ /* Enable all interrupts, so we known what to fix */
+ pci_write_reg(0x0000c3ff, SH4_PCIINTM);
+ pci_write_reg(0x0000380f, SH4_PCIAINTM);
+ pci_write_reg(0xfb900047, SH7751_PCICONF1);
+ pci_write_reg(0xab000001, SH7751_PCICONF4);
+
+ mcr = inl(SH7751_MCR);
+ mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+ pci_write_reg(mcr, SH4_PCIMCR);
+
+ pci_write_reg(0x0c000000, SH7751_PCICONF5);
+ pci_write_reg(0xd0000000, SH7751_PCICONF6);
+ pci_write_reg(0x0c000000, SH4_PCILAR0);
+ pci_write_reg(0x00000000, SH4_PCILAR1);
+
+ return 0;
+}
diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c
new file mode 100644
index 00000000000..880cea1c0d8
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-se7780.c
@@ -0,0 +1,60 @@
+/*
+ * arch/sh/drivers/pci/fixups-se7780.c
+ *
+ * HITACHI UL Solution Engine 7780 PCI fixups
+ *
+ * Copyright (C) 2003 Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006 Paul Mundt
+ * Copyright (C) 2006 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+#include <asm/io.h>
+
+int pci_fixup_pcic(void)
+{
+ ctrl_outl(0x00000001, SH7780_PCI_VCR2);
+
+ /* Enable all interrupts, so we know what to fix */
+ pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
+ pci_write_reg(0x0000380F, SH7780_PCIAINTM);
+
+ /* Set up standard PCI config registers */
+ ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS));
+ ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD));
+ ctrl_outb( 0x00, PCI_REG(SH7780_PCIPIF));
+ ctrl_outb( 0x00, PCI_REG(SH7780_PCISUB));
+ ctrl_outb( 0x06, PCI_REG(SH7780_PCIBCC));
+ ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID));
+ ctrl_outw(0x0001, PCI_REG(SH7780_PCISID));
+
+ pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
+ pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
+ pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
+
+ pci_write_reg(0x00000000, SH7780_PCIMBAR1);
+ pci_write_reg(0x00000000, SH7780_PCILAR1);
+ pci_write_reg(0x00000000, SH7780_PCILSR1);
+
+ pci_write_reg(0xAB000801, SH7780_PCIIBAR);
+
+ /*
+ * Set the MBR so PCI address is one-to-one with window,
+ * meaning all calls go straight through... use ifdef to
+ * catch erroneous assumption.
+ */
+ pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
+ pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
+
+ /* Set IOBR for window containing area specified in pci.h */
+ pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
+ pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
+
+ pci_write_reg(0xA5000C01, SH7780_PCICR);
+
+ return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c
index d06030815a9..bff09ecf341 100644
--- a/arch/sh/drivers/pci/ops-landisk.c
+++ b/arch/sh/drivers/pci/ops-landisk.c
@@ -17,8 +17,8 @@
static struct resource sh7751_io_resource = {
.name = "SH7751 IO",
- .start = 0x4000,
- .end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
new file mode 100644
index 00000000000..a13cb764b0b
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-lboxre2.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/sh/drivers/pci/ops-lboxre2.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * PCI initialization for the NTT COMWARE L-BOX RE2
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <asm/lboxre2.h>
+#include "pci-sh4.h"
+
+static char lboxre2_irq_tab[] __initdata = {
+ IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ return lboxre2_irq_tab[slot];
+}
+
+static struct resource sh7751_io_resource = {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE ,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7751_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+ { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { NULL, NULL, NULL, 0, 0 },
+};
+
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS3_BASE_ADDR,
+ .size = 0x04000000,
+ },
+ .window1 = {
+ .base = 0x00000000, /* Unused */
+ .size = 0x00000000, /* Unused */
+ },
+ .flags = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+ return sh7751_pcic_init(&sh7751_pci_map);
+}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
index eeea1577e11..f2216081ab8 100644
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -17,18 +17,25 @@
#include <asm/io.h>
#include "pci-sh4.h"
+static char r7780rp_irq_tab[] __initdata = {
+ 0, 1, 2, 3,
+};
+
+static char r7780mp_irq_tab[] __initdata = {
+ 65, 66, 67, 68,
+};
+
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
- switch (slot) {
- case 0: return IRQ_PCISLOT1; /* PCI Interrupt #1 */
- case 1: return IRQ_PCISLOT2; /* PCI Interrupt #2 */
- case 2: return IRQ_PCISLOT3; /* PCI Interrupt #3 */
- case 3: return IRQ_PCISLOT4; /* PCI Interrupt E4 */
- default:
- printk(KERN_ERR "PCI: Bad IRQ mapping "
- "request for slot %d, func %d\n", slot, pin-1);
- return -1;
- }
+ if (mach_is_r7780rp())
+ return r7780rp_irq_tab[slot];
+ if (mach_is_r7780mp() || mach_is_r7785rp())
+ return r7780mp_irq_tab[slot];
+
+ printk(KERN_ERR "PCI: Bad IRQ mapping "
+ "request for slot %d, func %d\n", slot, pin-1);
+
+ return -1;
}
static struct resource sh7780_io_resource = {
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
new file mode 100644
index 00000000000..212674df5e1
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/sh/drivers/pci/ops-se7780.c
+ *
+ * Copyright (C) 2006 Nobuhiro Iwamatsu
+ *
+ * PCI initialization for the Hitachi UL Solution Engine 7780SE03
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/se7780.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
+
+/*
+ * IDSEL = AD16 PCI slot
+ * IDSEL = AD17 PCI slot
+ * IDSEL = AD18 Serial ATA Controller (Silicon Image SiL3512A)
+ * IDSEL = AD19 USB Host Controller (NEC uPD7210100A)
+ */
+
+/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
+static char se7780_irq_tab[4][16] __initdata = {
+ /* INTA */
+ { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTB */
+ { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTC */
+ { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTD */
+ { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ return se7780_irq_tab[pin-1][slot];
+}
+
+static struct resource se7780_io_resource = {
+ .name = "SH7780_IO",
+ .start = 0x2000,
+ .end = 0x2000 + SH7780_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource se7780_mem_resource = {
+ .name = "SH7780_mem",
+ .start = SH7780_PCI_MEMORY_BASE,
+ .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+extern struct pci_ops se7780_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+ { &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff },
+ { NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map se7780_pci_map = {
+ .window0 = {
+ .base = SH7780_CS2_BASE_ADDR,
+ .size = 0x04000000,
+ },
+ .flags = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+ printk("SH7780 PCI: Finished initialization of the PCI controller\n");
+
+ /*
+ * FPGA PCISEL register initialize
+ *
+ * CPU || SLOT1 | SLOT2 | S-ATA | USB
+ * -------------------------------------
+ * INTA || INTA | INTD | -- | INTB
+ * -------------------------------------
+ * INTB || INTB | INTA | -- | INTC
+ * -------------------------------------
+ * INTC || INTC | INTB | INTA | --
+ * -------------------------------------
+ * INTD || INTD | INTC | -- | INTA
+ * -------------------------------------
+ */
+ ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
+ ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
+
+ return sh7780_pcic_init(&se7780_pci_map);
+}
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 2d4371009a5..54232f13e40 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -162,3 +162,9 @@ char * __init pcibios_setup(char *str)
return str;
}
+
+int __attribute__((weak)) pci_fixup_pcic(void)
+{
+ /* Nothing to do. */
+ return 0;
+}
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 5a61d6041f2..1901c33cde6 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -1,7 +1,7 @@
#ifndef __PCI_SH4_H
#define __PCI_SH4_H
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
#include "pci-sh7780.h"
#else
#include "pci-sh7751.h"
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 9ddff760d3c..1aca7fe5783 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -12,7 +12,6 @@
* License. See linux/COPYING for more information.
*
*/
-
#undef DEBUG
#include <linux/init.h>
@@ -28,7 +27,7 @@
* Initialization. Try all known PCI access methods. Note that we support
* using both PCI BIOS and direct access: in such cases, we use I/O ports
* to access config space.
- *
+ *
* Note that the platform specific initialization (BSC registers, and memory
* space mapping) will be called via the platform defined function
* pcibios_init_platform().
@@ -115,7 +114,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
* Wait Cycle Control + Parity Enable + Bus Master +
* Mem space enable
*/
- word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
+ word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
pci_write_reg(word, SH7751_PCICONF1);
@@ -123,10 +122,10 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
word = PCI_BASE_CLASS_BRIDGE << 24;
pci_write_reg(word, SH7751_PCICONF2);
- /* Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
+ /* Set IO and Mem windows to local address
+ * Make PCI and local address the same for easy 1 to 1 mapping
* Window0 = map->window0.size @ non-cached area base = SDRAM
- * Window1 = map->window1.size @ cached area base = SDRAM
+ * Window1 = map->window1.size @ cached area base = SDRAM
*/
word = map->window0.size - 1;
pci_write_reg(word, SH4_PCILSR0);
@@ -175,7 +174,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
}
-
+
if (!word)
return 0;
@@ -194,9 +193,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
* DMA interrupts...
*/
-#ifdef CONFIG_SH_RTS7751R2D
pci_fixup_pcic();
-#endif
/* SH7751 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 602b644c35a..5508e45d483 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -48,7 +48,7 @@
static int __init sh7780_pci_init(void)
{
unsigned int id;
- int ret;
+ int ret, match = 0;
pr_debug("PCI: Starting intialization.\n");
@@ -56,19 +56,43 @@ static int __init sh7780_pci_init(void)
/* check for SH7780/SH7780R hardware */
id = pci_read_reg(SH7780_PCIVID);
- if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
- (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
+ if ((id & 0xffff) == SH7780_VENDOR_ID) {
+ switch ((id >> 16) & 0xffff) {
+ case SH7780_DEVICE_ID:
+ case SH7781_DEVICE_ID:
+ case SH7785_DEVICE_ID:
+ match = 1;
+ break;
+ }
+ }
+
+ if (unlikely(!match)) {
printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
return -ENODEV;
}
/* Setup the INTC */
- ctrl_outl(0x00200000, INTC_ICR0); /* INTC SH-4 Mode */
- ctrl_outl(0x00078000, INTC_INT2MSKCR); /* enable PCIINTA - PCIINTD */
- ctrl_outl(0x40000000, INTC_INTMSK1); /* disable IRL4-7 Interrupt */
- ctrl_outl(0x0000fffe, INTC_INTMSK2); /* disable IRL4-7 Interrupt */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1); /* enable IRL0-3 Interrupt */
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); /* enable IRL0-3 Interrupt */
+ if (mach_is_7780se()) {
+ /* ICR0: IRL=use separately */
+ ctrl_outl(0x00C00020, INTC_ICR0);
+ /* ICR1: detect low level(for 2ndcut) */
+ ctrl_outl(0xAAAA0000, INTC_ICR1);
+ /* INTPRI: priority=3(all) */
+ ctrl_outl(0x33333333, INTC_INTPRI);
+ } else {
+ /* INTC SH-4 Mode */
+ ctrl_outl(0x00200000, INTC_ICR0);
+ /* enable PCIINTA - PCIINTD */
+ ctrl_outl(0x00078000, INTC_INT2MSKCR);
+ /* disable IRL4-7 Interrupt */
+ ctrl_outl(0x40000000, INTC_INTMSK1);
+ /* disable IRL4-7 Interrupt */
+ ctrl_outl(0x0000fffe, INTC_INTMSK2);
+ /* enable IRL0-3 Interrupt */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ /* enable IRL0-3 Interrupt */
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ }
if ((ret = sh4_pci_check_direct()) != 0)
return ret;
@@ -138,9 +162,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
* DMA interrupts...
*/
-#ifdef CONFIG_SH_R7780RP
+ /* Apply any last-minute PCIC fixups */
pci_fixup_pcic();
-#endif
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index f02d2180a4b..00d12d0f8c1 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -14,8 +14,9 @@
/* Platform Specific Values */
#define SH7780_VENDOR_ID 0x1912
-#define SH7780_DEVICE_ID 0x0002
#define SH7781_DEVICE_ID 0x0001
+#define SH7780_DEVICE_ID 0x0002
+#define SH7785_DEVICE_ID 0x0007
/* SH7780 Control Registers */
#define SH7780_PCI_VCR0 0xFE000000
@@ -65,6 +66,22 @@
#define SH7780_PCIPMCSR_BSE 0x046
#define SH7780_PCICDD 0x047
+#define SH7780_PCICR 0x100 /* PCI Control Register */
+#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */
+#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */
+#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */
+#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */
+#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
+#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
+#define SH7780_PCIAIR 0x11C /* Error Address Register */
+#define SH7780_PCICIR 0x120 /* Error Command/Data Register */
+#define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */
+#define SH7780_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
+#define SH7780_PCIBMIR 0x138 /* Error Bus Master Register */
+#define SH7780_PCIPAR 0x1C0 /* PIO Address Register */
+#define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
+#define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
+
#define SH7780_PCIMBR0 0x1E0
#define SH7780_PCIMBMR0 0x1E4
#define SH7780_PCIMBR2 0x1F0
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index ff30d7f5804..9104b625764 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -20,5 +20,6 @@ obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 3e5fa1e24df..0758d48147a 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -29,7 +29,7 @@
* 0xB8001000 : Common Memory
* 0xBA000000 : I/O
*/
-#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
/* SH4 can't access PCMCIA interface through P2 area.
* we must remap it with appropreate attribute bit of the page set.
* this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
@@ -71,7 +71,7 @@ static int __init cf_init_default(void)
/* You must have enabled the card, and set the level interrupt
* before reaching this point. Possibly in boot ROM or boot loader.
*/
-#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
allocate_cf_area();
#endif
#if defined(CONFIG_SH_UNKNOWN)
@@ -84,15 +84,25 @@ static int __init cf_init_default(void)
#if defined(CONFIG_SH_SOLUTION_ENGINE)
#include <asm/se.h>
+#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
+#include <asm/se7722.h>
+#endif
/*
- * SolutionEngine
+ * SolutionEngine Seriese
*
+ * about MS770xSE
* 0xB8400000 : Common Memory
* 0xB8500000 : Attribute
* 0xB8600000 : I/O
+ *
+ * about MS7722SE
+ * 0xB0400000 : Common Memory
+ * 0xB0500000 : Attribute
+ * 0xB0600000 : I/O
*/
+#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE)
static int __init cf_init_se(void)
{
if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
@@ -109,7 +119,7 @@ static int __init cf_init_se(void)
* flag == COMMON/ATTRIBUTE/IO
*/
/* common window open */
- ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */
+ ctrl_outw(0x8a84, MRSHPC_MW0CR1);
if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
/* common mode & bus width 16bit SWAP = 1*/
ctrl_outw(0x0b00, MRSHPC_MW0CR2);
@@ -118,7 +128,7 @@ static int __init cf_init_se(void)
ctrl_outw(0x0300, MRSHPC_MW0CR2);
/* attribute window open */
- ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */
+ ctrl_outw(0x8a85, MRSHPC_MW1CR1);
if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
/* attribute mode & bus width 16bit SWAP = 1*/
ctrl_outw(0x0a00, MRSHPC_MW1CR2);
@@ -127,7 +137,7 @@ static int __init cf_init_se(void)
ctrl_outw(0x0200, MRSHPC_MW1CR2);
/* I/O window open */
- ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */
+ ctrl_outw(0x8a86, MRSHPC_IOWCR1);
ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */
if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
@@ -143,10 +153,10 @@ static int __init cf_init_se(void)
int __init cf_init(void)
{
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
- if (MACH_SE)
+ if( mach_is_se() || mach_is_7722se() ){
return cf_init_se();
-#endif
+ }
+
return cf_init_default();
}
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index abb586b1256..014f318f5a0 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -1,7 +1,7 @@
/*
* arch/sh/kernel/cpu/clock.c - SuperH clock framework
*
- * Copyright (C) 2005, 2006 Paul Mundt
+ * Copyright (C) 2005, 2006, 2007 Paul Mundt
*
* This clock framework is derived from the OMAP version by:
*
@@ -23,6 +23,7 @@
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
#include <asm/clock.h>
#include <asm/timer.h>
@@ -98,15 +99,17 @@ int __clk_enable(struct clk *clk)
if (clk->ops && clk->ops->init)
clk->ops->init(clk);
+ kref_get(&clk->kref);
+
if (clk->flags & CLK_ALWAYS_ENABLED)
return 0;
if (likely(clk->ops && clk->ops->enable))
clk->ops->enable(clk);
- kref_get(&clk->kref);
return 0;
}
+EXPORT_SYMBOL_GPL(__clk_enable);
int clk_enable(struct clk *clk)
{
@@ -119,6 +122,7 @@ int clk_enable(struct clk *clk)
return ret;
}
+EXPORT_SYMBOL_GPL(clk_enable);
static void clk_kref_release(struct kref *kref)
{
@@ -127,11 +131,17 @@ static void clk_kref_release(struct kref *kref)
void __clk_disable(struct clk *clk)
{
+ int count = kref_put(&clk->kref, clk_kref_release);
+
if (clk->flags & CLK_ALWAYS_ENABLED)
return;
- kref_put(&clk->kref, clk_kref_release);
+ if (!count) { /* count reaches zero, disable the clock */
+ if (likely(clk->ops && clk->ops->disable))
+ clk->ops->disable(clk);
+ }
}
+EXPORT_SYMBOL_GPL(__clk_disable);
void clk_disable(struct clk *clk)
{
@@ -141,6 +151,7 @@ void clk_disable(struct clk *clk)
__clk_disable(clk);
spin_unlock_irqrestore(&clock_lock, flags);
}
+EXPORT_SYMBOL_GPL(clk_disable);
int clk_register(struct clk *clk)
{
@@ -151,8 +162,18 @@ int clk_register(struct clk *clk)
mutex_unlock(&clock_list_sem);
+ if (clk->flags & CLK_ALWAYS_ENABLED) {
+ pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name);
+ if (clk->ops && clk->ops->init)
+ clk->ops->init(clk);
+ if (clk->ops && clk->ops->enable)
+ clk->ops->enable(clk);
+ pr_debug( "Enabled.");
+ }
+
return 0;
}
+EXPORT_SYMBOL_GPL(clk_register);
void clk_unregister(struct clk *clk)
{
@@ -160,21 +181,29 @@ void clk_unregister(struct clk *clk)
list_del(&clk->node);
mutex_unlock(&clock_list_sem);
}
+EXPORT_SYMBOL_GPL(clk_unregister);
-inline unsigned long clk_get_rate(struct clk *clk)
+unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
+EXPORT_SYMBOL_GPL(clk_get_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
+ return clk_set_rate_ex(clk, rate, 0);
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
+{
int ret = -EOPNOTSUPP;
if (likely(clk->ops && clk->ops->set_rate)) {
unsigned long flags;
spin_lock_irqsave(&clock_lock, flags);
- ret = clk->ops->set_rate(clk, rate);
+ ret = clk->ops->set_rate(clk, rate, algo_id);
spin_unlock_irqrestore(&clock_lock, flags);
}
@@ -183,6 +212,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
return ret;
}
+EXPORT_SYMBOL_GPL(clk_set_rate_ex);
void clk_recalc_rate(struct clk *clk)
{
@@ -197,6 +227,7 @@ void clk_recalc_rate(struct clk *clk)
if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
propagate_rate(clk);
}
+EXPORT_SYMBOL_GPL(clk_recalc_rate);
/*
* Returns a clock. Note that we first try to use device id on the bus
@@ -233,18 +264,43 @@ found:
return clk;
}
+EXPORT_SYMBOL_GPL(clk_get);
void clk_put(struct clk *clk)
{
if (clk && !IS_ERR(clk))
module_put(clk->owner);
}
+EXPORT_SYMBOL_GPL(clk_put);
void __init __attribute__ ((weak))
arch_init_clk_ops(struct clk_ops **ops, int type)
{
}
+static int show_clocks(char *buf, char **start, off_t off,
+ int len, int *eof, void *data)
+{
+ struct clk *clk;
+ char *p = buf;
+
+ list_for_each_entry_reverse(clk, &clock_list, node) {
+ unsigned long rate = clk_get_rate(clk);
+
+ /*
+ * Don't bother listing dummy clocks with no ancestry
+ * that only support enable and disable ops.
+ */
+ if (unlikely(!rate && !clk->parent))
+ continue;
+
+ p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
+ rate / 1000000, (rate % 1000000) / 10000);
+ }
+
+ return p - buf;
+}
+
int __init clk_init(void)
{
int i, ret = 0;
@@ -256,7 +312,6 @@ int __init clk_init(void)
arch_init_clk_ops(&clk->ops, i);
ret |= clk_register(clk);
- clk_enable(clk);
}
/* Kick the child clocks.. */
@@ -266,35 +321,14 @@ int __init clk_init(void)
return ret;
}
-int show_clocks(struct seq_file *m)
+static int __init clk_proc_init(void)
{
- struct clk *clk;
-
- list_for_each_entry_reverse(clk, &clock_list, node) {
- unsigned long rate = clk_get_rate(clk);
-
- /*
- * Don't bother listing dummy clocks with no ancestry
- * that only support enable and disable ops.
- */
- if (unlikely(!rate && !clk->parent))
- continue;
-
- seq_printf(m, "%-12s\t: %ld.%02ldMHz\n", clk->name,
- rate / 1000000, (rate % 1000000) / 10000);
- }
+ struct proc_dir_entry *p;
+ p = create_proc_read_entry("clocks", S_IRUSR, NULL,
+ show_clocks, NULL);
+ if (unlikely(!p))
+ return -EINVAL;
return 0;
}
-
-EXPORT_SYMBOL_GPL(clk_register);
-EXPORT_SYMBOL_GPL(clk_unregister);
-EXPORT_SYMBOL_GPL(clk_get);
-EXPORT_SYMBOL_GPL(clk_put);
-EXPORT_SYMBOL_GPL(clk_enable);
-EXPORT_SYMBOL_GPL(clk_disable);
-EXPORT_SYMBOL_GPL(__clk_enable);
-EXPORT_SYMBOL_GPL(__clk_disable);
-EXPORT_SYMBOL_GPL(clk_get_rate);
-EXPORT_SYMBOL_GPL(clk_set_rate);
-EXPORT_SYMBOL_GPL(clk_recalc_rate);
+subsys_initcall(clk_proc_init);
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 726acfcb9b7..6451ad63017 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -41,6 +41,23 @@ __setup("no" __stringify(x), x##_setup);
onchip_setup(fpu);
onchip_setup(dsp);
+#ifdef CONFIG_SPECULATIVE_EXECUTION
+#define CPUOPM 0xff2f0000
+#define CPUOPM_RABD (1 << 5)
+
+static void __init speculative_execution_init(void)
+{
+ /* Clear RABD */
+ ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
+
+ /* Flush the update */
+ (void)ctrl_inl(CPUOPM);
+ ctrl_barrier();
+}
+#else
+#define speculative_execution_init() do { } while (0)
+#endif
+
/*
* Generic first-level cache init
*/
@@ -261,4 +278,6 @@ asmlinkage void __init sh_cpu_init(void)
*/
ubc_wakeup();
#endif
+
+ speculative_execution_init();
}
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 0049d217561..1c23308cfc2 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -4,6 +4,6 @@
obj-y += imask.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
-obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
+obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index 74defe76a05..d8e22f4ff0f 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -18,7 +18,8 @@
#define INTC2_BASE 0xfe080000
#define INTC2_INTMSK (INTC2_BASE + 0x40)
#define INTC2_INTMSKCLR (INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785)
#define INTC2_BASE 0xffd40000
#define INTC2_INTMSK (INTC2_BASE + 0x38)
#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c)
diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c
index f60007783a2..67602685df1 100644
--- a/arch/sh/kernel/cpu/irq/pint.c
+++ b/arch/sh/kernel/cpu/irq/pint.c
@@ -18,6 +18,58 @@
#include <asm/io.h>
#include <asm/machvec.h>
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define INTC_INTER 0xA4000014UL
+#define INTC_IPRD 0xA4000018UL
+#define INTC_ICR2 0xA4000012UL
+
+/* PFC */
+#define PORT_PACR 0xA4000100UL
+#define PORT_PBCR 0xA4000102UL
+#define PORT_PCCR 0xA4000104UL
+#define PORT_PDCR 0xA4000106UL
+#define PORT_PECR 0xA4000108UL
+#define PORT_PFCR 0xA400010AUL
+#define PORT_PGCR 0xA400010CUL
+#define PORT_PHCR 0xA400010EUL
+#define PORT_PJCR 0xA4000110UL
+#define PORT_PKCR 0xA4000112UL
+#define PORT_PLCR 0xA4000114UL
+#define PORT_PMCR 0xA4000118UL
+#define PORT_PNCR 0xA400011AUL
+#define PORT_PECR2 0xA4050148UL
+#define PORT_PFCR2 0xA405014AUL
+#define PORT_PNCR2 0xA405015AUL
+
+/* I/O port */
+#define PORT_PADR 0xA4000120UL
+#define PORT_PBDR 0xA4000122UL
+#define PORT_PCDR 0xA4000124UL
+#define PORT_PDDR 0xA4000126UL
+#define PORT_PEDR 0xA4000128UL
+#define PORT_PFDR 0xA400012AUL
+#define PORT_PGDR 0xA400012CUL
+#define PORT_PHDR 0xA400012EUL
+#define PORT_PJDR 0xA4000130UL
+#define PORT_PKDR 0xA4000132UL
+#define PORT_PLDR 0xA4000134UL
+#define PORT_PMDR 0xA4000138UL
+#define PORT_PNDR 0xA400013AUL
+
+#define PINT0_IRQ 40
+#define PINT8_IRQ 41
+#define PINT_IRQ_BASE 86
+
+#define PINT0_IPR_ADDR INTC_IPRD
+#define PINT0_IPR_POS 3
+#define PINT0_PRIORITY 2
+
+#define PINT8_IPR_ADDR INTC_IPRD
+#define PINT8_IPR_POS 2
+#define PINT8_PRIORITY 2
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7705 */
+
static unsigned char pint_map[256];
static unsigned long portcr_mask;
@@ -126,7 +178,7 @@ int ipr_irq_demux(int irq)
unsigned long creg, dreg, d, sav;
if (irq == PINT0_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
creg = PORT_PACR;
dreg = PORT_PADR;
#else
@@ -144,7 +196,7 @@ int ipr_irq_demux(int irq)
return PINT_IRQ_BASE + pint_map[d];
} else if (irq == PINT8_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
creg = PORT_PBCR;
dreg = PORT_PBDR;
#else
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 83905e4e438..09faa056cd4 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o
obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o
obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o
obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH3) := clock-sh3.o
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 821b0ab7b52..647623b22ed 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -78,6 +78,9 @@ int __init detect_cpu_and_cache_system(void)
#if defined(CONFIG_CPU_SUBTYPE_SH7710)
current_cpu_data.type = CPU_SH7710;
#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7712)
+ current_cpu_data.type = CPU_SH7712;
+#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
current_cpu_data.type = CPU_SH7705;
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index a8e41c5241f..1983fb7ad6e 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -2,6 +2,7 @@
* SH7705 Setup
*
* Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -14,15 +15,15 @@
static struct plat_sci_port sci_platform_data[] = {
{
- .mapbase = 0xa4400000,
+ .mapbase = 0xa4410000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 52, 53, 55, 54 },
+ .irqs = { 56, 57, 59 },
}, {
- .mapbase = 0xa4410000,
+ .mapbase = 0xa4400000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 56, 57, 59, 58 },
+ .irqs = { 52, 53, 55 },
}, {
.flags = 0,
}
@@ -46,3 +47,48 @@ static int __init sh7705_devices_setup(void)
ARRAY_SIZE(sh7705_devices));
}
__initcall(sh7705_devices_setup);
+
+static struct ipr_data sh7705_ipr_map[] = {
+ /* IRQ, IPR-idx, shift, priority */
+ { 16, 0, 12, 2 }, /* TMU0 TUNI*/
+ { 17, 0, 8, 2 }, /* TMU1 TUNI */
+ { 18, 0, 4, 2 }, /* TMU2 TUNI */
+ { 27, 1, 12, 2 }, /* WDT ITI */
+ { 20, 0, 0, 2 }, /* RTC ATI (alarm) */
+ { 21, 0, 0, 2 }, /* RTC PRI (period) */
+ { 22, 0, 0, 2 }, /* RTC CUI (carry) */
+ { 48, 4, 12, 7 }, /* DMAC DMTE0 */
+ { 49, 4, 12, 7 }, /* DMAC DMTE1 */
+ { 50, 4, 12, 7 }, /* DMAC DMTE2 */
+ { 51, 4, 12, 7 }, /* DMAC DMTE3 */
+ { 52, 4, 8, 3 }, /* SCIF0 ERI */
+ { 53, 4, 8, 3 }, /* SCIF0 RXI */
+ { 55, 4, 8, 3 }, /* SCIF0 TXI */
+ { 56, 4, 4, 3 }, /* SCIF1 ERI */
+ { 57, 4, 4, 3 }, /* SCIF1 RXI */
+ { 59, 4, 4, 3 }, /* SCIF1 TXI */
+};
+
+static unsigned long ipr_offsets[] = {
+ 0xFFFFFEE2 /* 0: IPRA */
+, 0xFFFFFEE4 /* 1: IPRB */
+, 0xA4000016 /* 2: IPRC */
+, 0xA4000018 /* 3: IPRD */
+, 0xA400001A /* 4: IPRE */
+, 0xA4080000 /* 5: IPRF */
+, 0xA4080002 /* 6: IPRG */
+, 0xA4080004 /* 7: IPRH */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+ if (idx >= ARRAY_SIZE(ipr_offsets))
+ return 0;
+ return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr()
+{
+ make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map));
+}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
index dc9b211cf87..c7d7c35fc83 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -48,24 +48,33 @@ static struct platform_device *sh7709_devices[] __initdata = {
static int __init sh7709_devices_setup(void)
{
return platform_add_devices(sh7709_devices,
- ARRAY_SIZE(sh7709_devices));
+ ARRAY_SIZE(sh7709_devices));
}
__initcall(sh7709_devices_setup);
-#define IPRx(A,N) .addr=A, .shift=0*N*-1
+#define IPRx(A,N) .addr=A, .shift=N
#define IPRA(N) IPRx(0xfffffee2UL,N)
#define IPRB(N) IPRx(0xfffffee4UL,N)
+#define IPRC(N) IPRx(0xa4000016UL,N)
+#define IPRD(N) IPRx(0xa4000018UL,N)
#define IPRE(N) IPRx(0xa400001aUL,N)
static struct ipr_data sh7709_ipr_map[] = {
- [16] = { IPRA(15-12), 2 }, /* TMU TUNI0 */
- [17] = { IPRA(11-8), 4 }, /* TMU TUNI1 */
- [22] = { IPRA(3-0), 2 }, /* RTC CUI */
- [23 ... 26] = { IPRB(7-4), 3 }, /* SCI */
- [27] = { IPRB(15-12), 2 }, /* WDT ITI */
- [48 ... 51] = { IPRE(15-12), 7 }, /* DMA */
- [52 ... 55] = { IPRE(11-8), 3 }, /* IRDA */
- [56 ... 59] = { IPRE(7-4), 3 }, /* SCIF */
+ [16] = { IPRA(12), 2 }, /* TMU TUNI0 */
+ [17] = { IPRA(8), 4 }, /* TMU TUNI1 */
+ [18 ... 19] = { IPRA(4), 1 }, /* TMU TUNI1 */
+ [20 ... 22] = { IPRA(0), 2 }, /* RTC CUI */
+ [23 ... 26] = { IPRB(4), 3 }, /* SCI */
+ [27] = { IPRB(12), 2 }, /* WDT ITI */
+ [32] = { IPRC(0), 1 }, /* IRQ 0 */
+ [33] = { IPRC(4), 1 }, /* IRQ 1 */
+ [34] = { IPRC(8), 1 }, /* IRQ 2 APM */
+ [35] = { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */
+ [36] = { IPRD(0), 1 }, /* IRQ 4 */
+ [37] = { IPRD(4), 1 }, /* IRQ 5 */
+ [48 ... 51] = { IPRE(12), 7 }, /* DMA */
+ [52 ... 55] = { IPRE(8), 3 }, /* IRDA */
+ [56 ... 59] = { IPRE(4), 3 }, /* SCIF */
};
void __init init_IRQ_ipr()
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 895f99ee6a9..51760a7e7f1 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -2,6 +2,7 @@
* SH7710 Setup
*
* Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -19,6 +20,12 @@ static struct plat_sci_port sci_platform_data[] = {
.type = PORT_SCIF,
.irqs = { 52, 53, 55, 54 },
}, {
+ .mapbase = 0xa4420000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 56, 57, 59, 58 },
+ }, {
+
.flags = 0,
}
};
@@ -41,3 +48,56 @@ static int __init sh7710_devices_setup(void)
ARRAY_SIZE(sh7710_devices));
}
__initcall(sh7710_devices_setup);
+
+static struct ipr_data sh7710_ipr_map[] = {
+ /* IRQ, IPR-idx, shift, priority */
+ { 16, 0, 12, 2 }, /* TMU0 TUNI*/
+ { 17, 0, 8, 2 }, /* TMU1 TUNI */
+ { 18, 0, 4, 2 }, /* TMU2 TUNI */
+ { 27, 1, 12, 2 }, /* WDT ITI */
+ { 20, 0, 0, 2 }, /* RTC ATI (alarm) */
+ { 21, 0, 0, 2 }, /* RTC PRI (period) */
+ { 22, 0, 0, 2 }, /* RTC CUI (carry) */
+ { 48, 4, 12, 7 }, /* DMAC DMTE0 */
+ { 49, 4, 12, 7 }, /* DMAC DMTE1 */
+ { 50, 4, 12, 7 }, /* DMAC DMTE2 */
+ { 51, 4, 12, 7 }, /* DMAC DMTE3 */
+ { 52, 4, 8, 3 }, /* SCIF0 ERI */
+ { 53, 4, 8, 3 }, /* SCIF0 RXI */
+ { 54, 4, 8, 3 }, /* SCIF0 BRI */
+ { 55, 4, 8, 3 }, /* SCIF0 TXI */
+ { 56, 4, 4, 3 }, /* SCIF1 ERI */
+ { 57, 4, 4, 3 }, /* SCIF1 RXI */
+ { 58, 4, 4, 3 }, /* SCIF1 BRI */
+ { 59, 4, 4, 3 }, /* SCIF1 TXI */
+ { 76, 5, 8, 7 }, /* DMAC DMTE4 */
+ { 77, 5, 8, 7 }, /* DMAC DMTE5 */
+ { 80, 6, 12, 5 }, /* EDMAC EINT0 */
+ { 81, 6, 8, 5 }, /* EDMAC EINT1 */
+ { 82, 6, 4, 5 }, /* EDMAC EINT2 */
+};
+
+static unsigned long ipr_offsets[] = {
+ 0xA414FEE2 /* 0: IPRA */
+, 0xA414FEE4 /* 1: IPRB */
+, 0xA4140016 /* 2: IPRC */
+, 0xA4140018 /* 3: IPRD */
+, 0xA414001A /* 4: IPRE */
+, 0xA4080000 /* 5: IPRF */
+, 0xA4080002 /* 6: IPRG */
+, 0xA4080004 /* 7: IPRH */
+, 0xA4080006 /* 8: IPRI */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+ if (idx >= ARRAY_SIZE(ipr_offsets))
+ return 0;
+ return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr()
+{
+ make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map));
+}
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index fa2019aabd7..fcb2c41bc34 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -82,7 +82,8 @@ static void shoc_clk_init(struct clk *clk)
for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
int divisor = frqcr3_divisors[i];
- if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
+ if (clk->ops->set_rate(clk, clk->parent->rate /
+ divisor, 0) == 0)
break;
}
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 58950de2696..8cd04904c77 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -124,6 +124,14 @@ int __init detect_cpu_and_cache_system(void)
current_cpu_data.dcache.ways = 4;
current_cpu_data.flags |= CPU_HAS_LLSC;
break;
+ case 0x3004:
+ case 0x3007:
+ current_cpu_data.type = CPU_SH7785;
+ current_cpu_data.icache.ways = 4;
+ current_cpu_data.dcache.ways = 4;
+ current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ CPU_HAS_LLSC;
+ break;
case 0x3008:
if (prr == 0xa0) {
current_cpu_data.type = CPU_SH7722;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a8f493f2f21..ab7422f8f82 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -5,6 +5,7 @@
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
@@ -13,7 +14,8 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
obj-y += $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
new file mode 100644
index 00000000000..29090035bc5
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -0,0 +1,600 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+ *
+ * SH7722 support for the clock framework
+ *
+ * Copyright (c) 2006-2007 Nomad Global Solutions Inc
+ * Based on code for sh7343 by Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+#define SH7722_PLL_FREQ (32000000/8)
+#define N (-1)
+#define NM (-2)
+#define ROUND_NEAREST 0
+#define ROUND_DOWN -1
+#define ROUND_UP +1
+
+static int adjust_algos[][3] = {
+ {}, /* NO_CHANGE */
+ { NM, N, 1 }, /* N:1, N:1 */
+ { 3, 2, 2 }, /* 3:2:2 */
+ { 5, 2, 2 }, /* 5:2:2 */
+ { N, 1, 1 }, /* N:1:1 */
+
+ { N, 1 }, /* N:1 */
+
+ { N, 1 }, /* N:1 */
+ { 3, 2 },
+ { 4, 3 },
+ { 5, 4 },
+
+ { N, 1 }
+};
+
+static unsigned long adjust_pair_of_clocks(unsigned long r1, unsigned long r2,
+ int m1, int m2, int round_flag)
+{
+ unsigned long rem, div;
+ int the_one = 0;
+
+ pr_debug( "Actual values: r1 = %ld\n", r1);
+ pr_debug( "...............r2 = %ld\n", r2);
+
+ if (m1 == m2) {
+ r2 = r1;
+ pr_debug( "setting equal rates: r2 now %ld\n", r2);
+ } else if ((m2 == N && m1 == 1) ||
+ (m2 == NM && m1 == N)) { /* N:1 or NM:N */
+ pr_debug( "Setting rates as 1:N (N:N*M)\n");
+ rem = r2 % r1;
+ pr_debug( "...remainder = %ld\n", rem);
+ if (rem) {
+ div = r2 / r1;
+ pr_debug( "...div = %ld\n", div);
+ switch (round_flag) {
+ case ROUND_NEAREST:
+ the_one = rem >= r1/2 ? 1 : 0; break;
+ case ROUND_UP:
+ the_one = 1; break;
+ case ROUND_DOWN:
+ the_one = 0; break;
+ }
+
+ r2 = r1 * (div + the_one);
+ pr_debug( "...setting r2 to %ld\n", r2);
+ }
+ } else if ((m2 == 1 && m1 == N) ||
+ (m2 == N && m1 == NM)) { /* 1:N or N:NM */
+ pr_debug( "Setting rates as N:1 (N*M:N)\n");
+ rem = r1 % r2;
+ pr_debug( "...remainder = %ld\n", rem);
+ if (rem) {
+ div = r1 / r2;
+ pr_debug( "...div = %ld\n", div);
+ switch (round_flag) {
+ case ROUND_NEAREST:
+ the_one = rem > r2/2 ? 1 : 0; break;
+ case ROUND_UP:
+ the_one = 0; break;
+ case ROUND_DOWN:
+ the_one = 1; break;
+ }
+
+ r2 = r1 / (div + the_one);
+ pr_debug( "...setting r2 to %ld\n", r2);
+ }
+ } else { /* value:value */
+ pr_debug( "Setting rates as %d:%d\n", m1, m2);
+ div = r1 / m1;
+ r2 = div * m2;
+ pr_debug( "...div = %ld\n", div);
+ pr_debug( "...setting r2 to %ld\n", r2);
+ }
+
+ return r2;
+}
+
+static void adjust_clocks(int originate, int *l, unsigned long v[],
+ int n_in_line)
+{
+ int x;
+
+ pr_debug( "Go down from %d...\n", originate);
+ /* go up recalculation clocks */
+ for (x = originate; x>0; x -- )
+ v[x-1] = adjust_pair_of_clocks(v[x], v[x-1],
+ l[x], l[x-1],
+ ROUND_UP);
+
+ pr_debug( "Go up from %d...\n", originate);
+ /* go down recalculation clocks */
+ for (x = originate; x<n_in_line - 1; x ++ )
+ v[x+1] = adjust_pair_of_clocks(v[x], v[x+1],
+ l[x], l[x+1],
+ ROUND_UP);
+}
+
+
+/*
+ * SH7722 uses a common set of multipliers and divisors, so this
+ * is quite simple..
+ */
+
+/*
+ * Instead of having two separate multipliers/divisors set, like this:
+ *
+ * static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+ * static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+ *
+ * I created the divisors2 array, which is used to calculate rate like
+ * rate = parent * 2 / divisors2[ divisor ];
+*/
+static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk_set_rate(clk, clk_get_rate(clk));
+}
+
+static void master_clk_recalc(struct clk *clk)
+{
+ unsigned long frqcr = ctrl_inl(FRQCR);
+
+ clk->rate = CONFIG_SH_PCLK_FREQ * (1 + (frqcr >> 24 & 0xF));
+}
+
+static int master_clk_setrate(struct clk *clk, unsigned long rate, int id)
+{
+ int div = rate / SH7722_PLL_FREQ;
+ int master_divs[] = { 2, 3, 4, 6, 8, 16 };
+ int index;
+ unsigned long frqcr;
+
+ if (rate < SH7722_PLL_FREQ * 2)
+ return -EINVAL;
+
+ for (index = 1; index < ARRAY_SIZE(master_divs); index++)
+ if (div >= master_divs[index - 1] && div < master_divs[index])
+ break;
+
+ if (index >= ARRAY_SIZE(master_divs))
+ index = ARRAY_SIZE(master_divs);
+ div = master_divs[index - 1];
+
+ frqcr = ctrl_inl(FRQCR);
+ frqcr &= ~(0xF << 24);
+ frqcr |= ( (div-1) << 24);
+ ctrl_outl(frqcr, FRQCR);
+
+ return 0;
+}
+
+static struct clk_ops sh7722_master_clk_ops = {
+ .init = master_clk_init,
+ .recalc = master_clk_recalc,
+ .set_rate = master_clk_setrate,
+};
+
+struct frqcr_context {
+ unsigned mask;
+ unsigned shift;
+};
+
+struct frqcr_context sh7722_get_clk_context(const char *name)
+{
+ struct frqcr_context ctx = { 0, };
+
+ if (!strcmp(name, "peripheral_clk")) {
+ ctx.shift = 0;
+ ctx.mask = 0xF;
+ } else if (!strcmp(name, "sdram_clk")) {
+ ctx.shift = 4;
+ ctx.mask = 0xF;
+ } else if (!strcmp(name, "bus_clk")) {
+ ctx.shift = 8;
+ ctx.mask = 0xF;
+ } else if (!strcmp(name, "sh_clk")) {
+ ctx.shift = 12;
+ ctx.mask = 0xF;
+ } else if (!strcmp(name, "umem_clk")) {
+ ctx.shift = 16;
+ ctx.mask = 0xF;
+ } else if (!strcmp(name, "cpu_clk")) {
+ ctx.shift = 20;
+ ctx.mask = 7;
+ }
+ return ctx;
+}
+
+/**
+ * sh7722_find_divisors - find divisor for setting rate
+ *
+ * All sh7722 clocks use the same set of multipliers/divisors. This function
+ * chooses correct divisor to set the rate of clock with parent clock that
+ * generates frequency of 'parent_rate'
+ *
+ * @parent_rate: rate of parent clock
+ * @rate: requested rate to be set
+ */
+static int sh7722_find_divisors(unsigned long parent_rate, unsigned rate)
+{
+ unsigned div2 = parent_rate * 2 / rate;
+ int index;
+
+ if (rate > parent_rate)
+ return -EINVAL;
+
+ for (index = 1; index < ARRAY_SIZE(divisors2); index++) {
+ if (div2 > divisors2[index] && div2 <= divisors2[index])
+ break;
+ }
+ if (index >= ARRAY_SIZE(divisors2))
+ index = ARRAY_SIZE(divisors2) - 1;
+ return divisors2[index];
+}
+
+static void sh7722_frqcr_recalc(struct clk *clk)
+{
+ struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
+ unsigned long frqcr = ctrl_inl(FRQCR);
+ int index;
+
+ index = (frqcr >> ctx.shift) & ctx.mask;
+ clk->rate = clk->parent->rate * 2 / divisors2[index];
+}
+
+static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate,
+ int algo_id)
+{
+ struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
+ unsigned long parent_rate = clk->parent->rate;
+ int div;
+ unsigned long frqcr;
+ int err = 0;
+
+ /* pretty invalid */
+ if (parent_rate < rate)
+ return -EINVAL;
+
+ /* look for multiplier/divisor pair */
+ div = sh7722_find_divisors(parent_rate, rate);
+ if (div<0)
+ return div;
+
+ /* calculate new value of clock rate */
+ clk->rate = parent_rate * 2 / div;
+ frqcr = ctrl_inl(FRQCR);
+
+ /* FIXME: adjust as algo_id specifies */
+ if (algo_id != NO_CHANGE) {
+ int originator;
+ char *algo_group_1[] = { "cpu_clk", "umem_clk", "sh_clk" };
+ char *algo_group_2[] = { "sh_clk", "bus_clk" };
+ char *algo_group_3[] = { "sh_clk", "sdram_clk" };
+ char *algo_group_4[] = { "bus_clk", "peripheral_clk" };
+ char *algo_group_5[] = { "cpu_clk", "peripheral_clk" };
+ char **algo_current = NULL;
+ /* 3 is the maximum number of clocks in relation */
+ struct clk *ck[3];
+ unsigned long values[3]; /* the same comment as above */
+ int part_length = -1;
+ int i;
+
+ /*
+ * all the steps below only required if adjustion was
+ * requested
+ */
+ if (algo_id == IUS_N1_N1 ||
+ algo_id == IUS_322 ||
+ algo_id == IUS_522 ||
+ algo_id == IUS_N11) {
+ algo_current = algo_group_1;
+ part_length = 3;
+ }
+ if (algo_id == SB_N1) {
+ algo_current = algo_group_2;
+ part_length = 2;
+ }
+ if (algo_id == SB3_N1 ||
+ algo_id == SB3_32 ||
+ algo_id == SB3_43 ||
+ algo_id == SB3_54) {
+ algo_current = algo_group_3;
+ part_length = 2;
+ }
+ if (algo_id == BP_N1) {
+ algo_current = algo_group_4;
+ part_length = 2;
+ }
+ if (algo_id == IP_N1) {
+ algo_current = algo_group_5;
+ part_length = 2;
+ }
+ if (!algo_current)
+ goto incorrect_algo_id;
+
+ originator = -1;
+ for (i = 0; i < part_length; i ++ ) {
+ if (originator >= 0 && !strcmp(clk->name,
+ algo_current[i]))
+ originator = i;
+ ck[i] = clk_get(NULL, algo_current[i]);
+ values[i] = clk_get_rate(ck[i]);
+ }
+
+ if (originator >= 0)
+ adjust_clocks(originator, adjust_algos[algo_id],
+ values, part_length);
+
+ for (i = 0; i < part_length; i ++ ) {
+ struct frqcr_context part_ctx;
+ int part_div;
+
+ if (likely(!err)) {
+ part_div = sh7722_find_divisors(parent_rate,
+ rate);
+ if (part_div > 0) {
+ part_ctx = sh7722_get_clk_context(
+ ck[i]->name);
+ frqcr &= ~(part_ctx.mask <<
+ part_ctx.shift);
+ frqcr |= part_div << part_ctx.shift;
+ } else
+ err = part_div;
+ }
+
+ ck[i]->ops->recalc(ck[i]);
+ clk_put(ck[i]);
+ }
+ }
+
+ /* was there any error during recalculation ? If so, bail out.. */
+ if (unlikely(err!=0))
+ goto out_err;
+
+ /* clear FRQCR bits */
+ frqcr &= ~(ctx.mask << ctx.shift);
+ frqcr |= div << ctx.shift;
+
+ /* ...and perform actual change */
+ ctrl_outl(frqcr, FRQCR);
+ return 0;
+
+incorrect_algo_id:
+ return -EINVAL;
+out_err:
+ return err;
+}
+
+static struct clk_ops sh7722_frqcr_clk_ops = {
+ .recalc = sh7722_frqcr_recalc,
+ .set_rate = sh7722_frqcr_set_rate,
+};
+
+/*
+ * clock ops methods for SIU A/B and IrDA clock
+ *
+ */
+static int sh7722_siu_which(struct clk *clk)
+{
+ if (!strcmp(clk->name, "siu_a_clk"))
+ return 0;
+ if (!strcmp(clk->name, "siu_b_clk"))
+ return 1;
+ if (!strcmp(clk->name, "irda_clk"))
+ return 2;
+ return -EINVAL;
+}
+
+static unsigned long sh7722_siu_regs[] = {
+ [0] = SCLKACR,
+ [1] = SCLKBCR,
+ [2] = IrDACLKCR,
+};
+
+static int sh7722_siu_start_stop(struct clk *clk, int enable)
+{
+ int siu = sh7722_siu_which(clk);
+ unsigned long r;
+
+ if (siu < 0)
+ return siu;
+ BUG_ON(siu > 2);
+ r = ctrl_inl(sh7722_siu_regs[siu]);
+ if (enable)
+ ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+ else
+ ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+ return 0;
+}
+
+static void sh7722_siu_enable(struct clk *clk)
+{
+ sh7722_siu_start_stop(clk, 1);
+}
+
+static void sh7722_siu_disable(struct clk *clk)
+{
+ sh7722_siu_start_stop(clk, 0);
+}
+
+static void sh7722_video_enable(struct clk *clk)
+{
+ unsigned long r;
+
+ r = ctrl_inl(VCLKCR);
+ ctrl_outl( r & ~(1<<8), VCLKCR);
+}
+
+static void sh7722_video_disable(struct clk *clk)
+{
+ unsigned long r;
+
+ r = ctrl_inl(VCLKCR);
+ ctrl_outl( r | (1<<8), VCLKCR);
+}
+
+static int sh7722_video_set_rate(struct clk *clk, unsigned long rate,
+ int algo_id)
+{
+ unsigned long r;
+
+ r = ctrl_inl(VCLKCR);
+ r &= ~0x3F;
+ r |= ((clk->parent->rate / rate - 1) & 0x3F);
+ ctrl_outl(r, VCLKCR);
+ return 0;
+}
+
+static void sh7722_video_recalc(struct clk *clk)
+{
+ unsigned long r;
+
+ r = ctrl_inl(VCLKCR);
+ clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
+}
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+{
+ int siu = sh7722_siu_which(clk);
+ unsigned long r;
+ int div;
+
+ if (siu < 0)
+ return siu;
+ BUG_ON(siu > 2);
+ r = ctrl_inl(sh7722_siu_regs[siu]);
+ div = sh7722_find_divisors(clk->parent->rate, rate);
+ if (div < 0)
+ return div;
+ r = (r & ~0xF) | div;
+ ctrl_outl(r, sh7722_siu_regs[siu]);
+ return 0;
+}
+
+static void sh7722_siu_recalc(struct clk *clk)
+{
+ int siu = sh7722_siu_which(clk);
+ unsigned long r;
+
+ if (siu < 0)
+ return /* siu */ ;
+ BUG_ON(siu > 1);
+ r = ctrl_inl(sh7722_siu_regs[siu]);
+ clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
+
+static struct clk_ops sh7722_siu_clk_ops = {
+ .recalc = sh7722_siu_recalc,
+ .set_rate = sh7722_siu_set_rate,
+ .enable = sh7722_siu_enable,
+ .disable = sh7722_siu_disable,
+};
+
+static struct clk_ops sh7722_video_clk_ops = {
+ .recalc = sh7722_video_recalc,
+ .set_rate = sh7722_video_set_rate,
+ .enable = sh7722_video_enable,
+ .disable = sh7722_video_disable,
+};
+/*
+ * and at last, clock definitions themselves
+ */
+static struct clk sh7722_umem_clock = {
+ .name = "umem_clk",
+ .ops = &sh7722_frqcr_clk_ops,
+};
+
+static struct clk sh7722_sh_clock = {
+ .name = "sh_clk",
+ .ops = &sh7722_frqcr_clk_ops,
+};
+
+static struct clk sh7722_peripheral_clock = {
+ .name = "peripheral_clk",
+ .ops = &sh7722_frqcr_clk_ops,
+};
+
+static struct clk sh7722_sdram_clock = {
+ .name = "sdram_clk",
+ .ops = &sh7722_frqcr_clk_ops,
+};
+
+/*
+ * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
+ * methods of clk_ops determine which register they should access by
+ * examining clk->name field
+ */
+static struct clk sh7722_siu_a_clock = {
+ .name = "siu_a_clk",
+ .ops = &sh7722_siu_clk_ops,
+};
+
+static struct clk sh7722_siu_b_clock = {
+ .name = "siu_b_clk",
+ .ops = &sh7722_siu_clk_ops,
+};
+
+static struct clk sh7722_irda_clock = {
+ .name = "irda_clk",
+ .ops = &sh7722_siu_clk_ops,
+};
+
+static struct clk sh7722_video_clock = {
+ .name = "video_clk",
+ .ops = &sh7722_video_clk_ops,
+};
+
+static struct clk *sh7722_clocks[] = {
+ &sh7722_umem_clock,
+ &sh7722_sh_clock,
+ &sh7722_peripheral_clock,
+ &sh7722_sdram_clock,
+ &sh7722_siu_a_clock,
+ &sh7722_siu_b_clock,
+ &sh7722_irda_clock,
+ &sh7722_video_clock,
+};
+
+/*
+ * init in order: master, module, bus, cpu
+ */
+struct clk_ops *onchip_ops[] = {
+ &sh7722_master_clk_ops,
+ &sh7722_frqcr_clk_ops,
+ &sh7722_frqcr_clk_ops,
+ &sh7722_frqcr_clk_ops,
+};
+
+void __init
+arch_init_clk_ops(struct clk_ops **ops, int type)
+{
+ BUG_ON(type < 0 || type > ARRAY_SIZE(onchip_ops));
+ *ops = onchip_ops[type];
+}
+
+int __init sh7722_clock_init(void)
+{
+ struct clk *master;
+ int i;
+
+ master = clk_get(NULL, "master_clk");
+ for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) {
+ pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name);
+ sh7722_clocks[i]->parent = master;
+ clk_register(sh7722_clocks[i]);
+ }
+ clk_put(master);
+ return 0;
+}
+arch_initcall(sh7722_clock_init);
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
new file mode 100644
index 00000000000..805535aa505
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -0,0 +1,162 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+ *
+ * SH7785 support for the clock framework
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4, 6 };
+static int ufc_divisors[] = { 1, 1, 4, 6 };
+static int sfc_divisors[] = { 1, 1, 4, 6 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18,
+ 24, 32, 36, 48, 1, 1, 1, 1 };
+static int mfc_divisors[] = { 1, 1, 4, 6 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18,
+ 24, 32, 36, 48, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= 36;
+}
+
+static struct clk_ops sh7785_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQMR1) & 0x000f);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7785_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7785_clk_ops[] = {
+ &sh7785_master_clk_ops,
+ &sh7785_module_clk_ops,
+ &sh7785_bus_clk_ops,
+ &sh7785_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7785_clk_ops))
+ *ops = sh7785_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
+ clk->rate = clk->parent->rate / sfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_shyway_clk_ops = {
+ .recalc = shyway_clk_recalc,
+};
+
+static struct clk sh7785_shyway_clk = {
+ .name = "shyway_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7785_shyway_clk_ops,
+};
+
+static void ddr_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
+ clk->rate = clk->parent->rate / mfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_ddr_clk_ops = {
+ .recalc = ddr_clk_recalc,
+};
+
+static struct clk sh7785_ddr_clk = {
+ .name = "ddr_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7785_ddr_clk_ops,
+};
+
+static void ram_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 24) & 0x0003);
+ clk->rate = clk->parent->rate / ufc_divisors[idx];
+}
+
+static struct clk_ops sh7785_ram_clk_ops = {
+ .recalc = ram_clk_recalc,
+};
+
+static struct clk sh7785_ram_clk = {
+ .name = "ram_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7785_ram_clk_ops,
+};
+
+/*
+ * Additional SH7785-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7785_onchip_clocks[] = {
+ &sh7785_shyway_clk,
+ &sh7785_ddr_clk,
+ &sh7785_ram_clk,
+};
+
+static int __init sh7785_clk_init(void)
+{
+ struct clk *clk = clk_get(NULL, "master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sh7785_onchip_clocks); i++) {
+ struct clk *clkp = sh7785_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+arch_initcall(sh7785_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
new file mode 100644
index 00000000000..07b0de82cfe
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -0,0 +1,103 @@
+/*
+ * SH7785 Setup
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffea0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ }, {
+ .mapbase = 0xffeb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 44, 45, 47, 46 },
+ },
+
+ /*
+ * The rest of these all have multiplexed IRQs
+ */
+ {
+ .mapbase = 0xffec0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 60, 60, 60, 60 },
+ }, {
+ .mapbase = 0xffed0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 61, 61, 61, 61 },
+ }, {
+ .mapbase = 0xffee0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 62, 62, 62, 62 },
+ }, {
+ .mapbase = 0xffef0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 63, 63, 63, 63 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7785_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7785_devices_setup(void)
+{
+ return platform_add_devices(sh7785_devices,
+ ARRAY_SIZE(sh7785_devices));
+}
+__initcall(sh7785_devices_setup);
+
+static struct intc2_data intc2_irq_table[] = {
+ { 28, 0, 24, 0, 0, 2 }, /* TMU0 */
+
+ { 40, 8, 24, 0, 2, 3 }, /* SCIF0 ERI */
+ { 41, 8, 24, 0, 2, 3 }, /* SCIF0 RXI */
+ { 42, 8, 24, 0, 2, 3 }, /* SCIF0 BRI */
+ { 43, 8, 24, 0, 2, 3 }, /* SCIF0 TXI */
+
+ { 44, 8, 16, 0, 3, 3 }, /* SCIF1 ERI */
+ { 45, 8, 16, 0, 3, 3 }, /* SCIF1 RXI */
+ { 46, 8, 16, 0, 3, 3 }, /* SCIF1 BRI */
+ { 47, 8, 16, 0, 3, 3 }, /* SCIF1 TXI */
+
+ { 64, 0x14, 8, 0, 14, 2 }, /* PCIC0 */
+ { 65, 0x14, 0, 0, 15, 2 }, /* PCIC1 */
+ { 66, 0x18, 24, 0, 16, 2 }, /* PCIC2 */
+ { 67, 0x18, 16, 0, 17, 2 }, /* PCIC3 */
+ { 68, 0x18, 8, 0, 18, 2 }, /* PCIC4 */
+
+ { 60, 8, 8, 0, 4, 3 }, /* SCIF2 ERI, RXI, BRI, TXI */
+ { 60, 8, 0, 0, 5, 3 }, /* SCIF3 ERI, RXI, BRI, TXI */
+ { 60, 12, 24, 0, 6, 3 }, /* SCIF4 ERI, RXI, BRI, TXI */
+ { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */
+};
+
+void __init init_IRQ_intc2(void)
+{
+ make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+}
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
new file mode 100644
index 00000000000..4a2ecbe27d8
--- /dev/null
+++ b/arch/sh/kernel/crash_dump.c
@@ -0,0 +1,46 @@
+/*
+ * crash_dump.c - Memory preserving reboot related code.
+ *
+ * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ * Copyright (C) IBM Corporation, 2004. All rights reserved
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/io.h>
+#include <asm/uaccess.h>
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ * space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ * otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel. We stitch up a pte, similar to kmap_atomic.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+ size_t csize, unsigned long offset, int userbuf)
+{
+ void *vaddr;
+
+ if (!csize)
+ return 0;
+
+ vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+
+ if (userbuf) {
+ if (copy_to_user(buf, (vaddr + offset), csize)) {
+ iounmap(vaddr);
+ return -EFAULT;
+ }
+ } else
+ memcpy(buf, (vaddr + offset), csize);
+
+ iounmap(vaddr);
+ return csize;
+}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 9bdd8a00cd4..27b923c45b3 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -13,6 +13,7 @@
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <asm/processor.h>
+#include <asm/machvec.h>
#include <asm/uaccess.h>
#include <asm/thread_info.h>
#include <asm/cpu/mmu_context.h>
@@ -44,7 +45,7 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
}
- if (i < NR_IRQS) {
+ if (i < sh_mv.mv_nr_irqs) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
@@ -61,7 +62,7 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == NR_IRQS)
+ } else if (i == sh_mv.mv_nr_irqs)
seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
return 0;
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d8927d85492..a5323364cbc 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -6,11 +6,11 @@
* David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
* Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>,
* Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
- *
+ *
* This version by Henry Bell <henry.bell@st.com>
* Minor modifications by Jeremy Siegel <jsiegel@mvista.com>
- *
- * Contains low-level support for remote debug using GDB.
+ *
+ * Contains low-level support for remote debug using GDB.
*
* To enable debugger support, two things need to happen. A call to
* set_debug_traps() is necessary in order to allow any breakpoints
@@ -48,7 +48,7 @@
* k kill (Detach GDB)
*
* d Toggle debug flag
- * D Detach GDB
+ * D Detach GDB
*
* Hct Set thread t for operations, OK or ENN
* c = 'c' (step, cont), c = 'g' (other
@@ -58,7 +58,7 @@
* qfThreadInfo Get list of current threads (first) m<id>
* qsThreadInfo " " " " " (subsequent)
* qOffsets Get section offsets Text=x;Data=y;Bss=z
- *
+ *
* TXX Find if thread XX is alive OK or ENN
* ? What was the last sigval ? SNN (signal NN)
* O Output to GDB console
@@ -74,7 +74,7 @@
* '$' or '#'. If <data> starts with two characters followed by
* ':', then the existing stubs interpret this as a sequence number.
*
- * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
+ * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
* checksum of <data>, the most significant nibble is sent first.
* the hex digits 0-9,a-f are used.
*
@@ -86,8 +86,8 @@
* Responses can be run-length encoded to save space. A '*' means that
* the next character is an ASCII encoding giving a repeat count which
* stands for that many repititions of the character preceding the '*'.
- * The encoding is n+29, yielding a printable character where n >=3
- * (which is where RLE starts to win). Don't use an n > 126.
+ * The encoding is n+29, yielding a printable character where n >=3
+ * (which is where RLE starts to win). Don't use an n > 126.
*
* So "0* " means the same as "0000".
*/
@@ -100,12 +100,10 @@
#include <linux/delay.h>
#include <linux/linkage.h>
#include <linux/init.h>
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
#include <linux/console.h>
-#endif
-
+#include <linux/sysrq.h>
#include <asm/system.h>
+#include <asm/cacheflush.h>
#include <asm/current.h>
#include <asm/signal.h>
#include <asm/pgtable.h>
@@ -153,7 +151,6 @@ char kgdb_in_gdb_mode;
char in_nmi; /* Set during NMI to prevent reentry */
int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */
int kgdb_enabled = 1; /* Default to enabled, cmdline can disable */
-int kgdb_halt;
/* Exposed for user access */
struct task_struct *kgdb_current;
@@ -246,14 +243,6 @@ static char out_buffer[OUTBUFMAX];
static void kgdb_to_gdb(const char *s);
-#ifdef CONFIG_KGDB_THREAD
-static struct task_struct *trapped_thread;
-static struct task_struct *current_thread;
-typedef unsigned char threadref[8];
-#define BUF_THREAD_ID_SIZE 16
-#endif
-
-
/* Convert ch to hex */
static int hex(const char ch)
{
@@ -328,7 +317,7 @@ static int hex_to_int(char **ptr, int *int_value)
}
/* Copy the binary array pointed to by buf into mem. Fix $, #,
- and 0x7d escaped with 0x7d. Return a pointer to the character
+ and 0x7d escaped with 0x7d. Return a pointer to the character
after the last byte written. */
static char *ebin_to_mem(const char *buf, char *mem, int count)
{
@@ -349,66 +338,6 @@ static char *pack_hex_byte(char *pkt, int byte)
return pkt;
}
-#ifdef CONFIG_KGDB_THREAD
-
-/* Pack a thread ID */
-static char *pack_threadid(char *pkt, threadref * id)
-{
- char *limit;
- unsigned char *altid;
-
- altid = (unsigned char *) id;
-
- limit = pkt + BUF_THREAD_ID_SIZE;
- while (pkt < limit)
- pkt = pack_hex_byte(pkt, *altid++);
- return pkt;
-}
-
-/* Convert an integer into our threadref */
-static void int_to_threadref(threadref * id, const int value)
-{
- unsigned char *scan = (unsigned char *) id;
- int i = 4;
-
- while (i--)
- *scan++ = 0;
-
- *scan++ = (value >> 24) & 0xff;
- *scan++ = (value >> 16) & 0xff;
- *scan++ = (value >> 8) & 0xff;
- *scan++ = (value & 0xff);
-}
-
-/* Return a task structure ptr for a particular pid */
-static struct task_struct *get_thread(int pid)
-{
- struct task_struct *thread;
-
- /* Use PID_MAX w/gdb for pid 0 */
- if (pid == PID_MAX) pid = 0;
-
- /* First check via PID */
- thread = find_task_by_pid(pid);
-
- if (thread)
- return thread;
-
- /* Start at the start */
- thread = init_tasks[0];
-
- /* Walk along the linked list of tasks */
- do {
- if (thread->pid == pid)
- return thread;
- thread = thread->next_task;
- } while (thread != init_tasks[0]);
-
- return NULL;
-}
-
-#endif /* CONFIG_KGDB_THREAD */
-
/* Scan for the start char '$', read the packet and check the checksum */
static void get_packet(char *buffer, int buflen)
{
@@ -452,7 +381,7 @@ static void get_packet(char *buffer, int buflen)
/* Ack successful transfer */
put_debug_char('+');
- /* If a sequence char is present, reply
+ /* If a sequence char is present, reply
the sequence ID */
if (buffer[2] == ':') {
put_debug_char(buffer[0]);
@@ -611,74 +540,6 @@ static void gdb_regs_to_kgdb_regs(const int *gdb_regs,
regs->vbr = gdb_regs[VBR];
}
-#ifdef CONFIG_KGDB_THREAD
-/* Make a local copy of registers from the specified thread */
-asmlinkage void ret_from_fork(void);
-static void thread_regs_to_gdb_regs(const struct task_struct *thread,
- int *gdb_regs)
-{
- int regno;
- int *tregs;
-
- /* Initialize to zero */
- for (regno = 0; regno < MAXREG; regno++)
- gdb_regs[regno] = 0;
-
- /* Just making sure... */
- if (thread == NULL)
- return;
-
- /* A new fork has pt_regs on the stack from a fork() call */
- if (thread->thread.pc == (unsigned long)ret_from_fork) {
-
- int vbr_val;
- struct pt_regs *kregs;
- kregs = (struct pt_regs*)thread->thread.sp;
-
- gdb_regs[R0] = kregs->regs[R0];
- gdb_regs[R1] = kregs->regs[R1];
- gdb_regs[R2] = kregs->regs[R2];
- gdb_regs[R3] = kregs->regs[R3];
- gdb_regs[R4] = kregs->regs[R4];
- gdb_regs[R5] = kregs->regs[R5];
- gdb_regs[R6] = kregs->regs[R6];
- gdb_regs[R7] = kregs->regs[R7];
- gdb_regs[R8] = kregs->regs[R8];
- gdb_regs[R9] = kregs->regs[R9];
- gdb_regs[R10] = kregs->regs[R10];
- gdb_regs[R11] = kregs->regs[R11];
- gdb_regs[R12] = kregs->regs[R12];
- gdb_regs[R13] = kregs->regs[R13];
- gdb_regs[R14] = kregs->regs[R14];
- gdb_regs[R15] = kregs->regs[R15];
- gdb_regs[PC] = kregs->pc;
- gdb_regs[PR] = kregs->pr;
- gdb_regs[GBR] = kregs->gbr;
- gdb_regs[MACH] = kregs->mach;
- gdb_regs[MACL] = kregs->macl;
- gdb_regs[SR] = kregs->sr;
-
- asm("stc vbr, %0":"=r"(vbr_val));
- gdb_regs[VBR] = vbr_val;
- return;
- }
-
- /* Otherwise, we have only some registers from switch_to() */
- tregs = (int *)thread->thread.sp;
- gdb_regs[R15] = (int)tregs;
- gdb_regs[R14] = *tregs++;
- gdb_regs[R13] = *tregs++;
- gdb_regs[R12] = *tregs++;
- gdb_regs[R11] = *tregs++;
- gdb_regs[R10] = *tregs++;
- gdb_regs[R9] = *tregs++;
- gdb_regs[R8] = *tregs++;
- gdb_regs[PR] = *tregs++;
- gdb_regs[GBR] = *tregs++;
- gdb_regs[PC] = thread->thread.pc;
-}
-#endif /* CONFIG_KGDB_THREAD */
-
/* Calculate the new address for after a step */
static short *get_step_address(void)
{
@@ -759,7 +620,7 @@ static short *get_step_address(void)
return (short *) addr;
}
-/* Set up a single-step. Replace the instruction immediately after the
+/* Set up a single-step. Replace the instruction immediately after the
current instruction (i.e. next in the expected flow of control) with a
trap instruction, so that returning will cause only a single instruction
to be executed. Note that this model is slightly broken for instructions
@@ -797,37 +658,11 @@ static void undo_single_step(void)
/* Send a signal message */
static void send_signal_msg(const int signum)
{
-#ifndef CONFIG_KGDB_THREAD
out_buffer[0] = 'S';
out_buffer[1] = highhex(signum);
out_buffer[2] = lowhex(signum);
out_buffer[3] = 0;
put_packet(out_buffer);
-#else /* CONFIG_KGDB_THREAD */
- int threadid;
- threadref thref;
- char *out = out_buffer;
- const char *tstring = "thread";
-
- *out++ = 'T';
- *out++ = highhex(signum);
- *out++ = lowhex(signum);
-
- while (*tstring) {
- *out++ = *tstring++;
- }
- *out++ = ':';
-
- threadid = trapped_thread->pid;
- if (threadid == 0) threadid = PID_MAX;
- int_to_threadref(&thref, threadid);
- pack_threadid(out, &thref);
- out += BUF_THREAD_ID_SIZE;
- *out++ = ';';
-
- *out = 0;
- put_packet(out_buffer);
-#endif /* CONFIG_KGDB_THREAD */
}
/* Reply that all was well */
@@ -962,15 +797,7 @@ static void step_with_sig_msg(void)
/* Send register contents */
static void send_regs_msg(void)
{
-#ifdef CONFIG_KGDB_THREAD
- if (!current_thread)
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- else
- thread_regs_to_gdb_regs(current_thread, registers);
-#else
kgdb_regs_to_gdb_regs(&trap_registers, registers);
-#endif
-
mem_to_hex((char *) registers, out_buffer, NUMREGBYTES);
put_packet(out_buffer);
}
@@ -978,201 +805,13 @@ static void send_regs_msg(void)
/* Set register contents - currently can't set other thread's registers */
static void set_regs_msg(void)
{
-#ifdef CONFIG_KGDB_THREAD
- if (!current_thread) {
-#endif
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
- gdb_regs_to_kgdb_regs(registers, &trap_registers);
- send_ok_msg();
-#ifdef CONFIG_KGDB_THREAD
- } else
- send_err_msg();
-#endif
-}
-
-
-#ifdef CONFIG_KGDB_THREAD
-
-/* Set the status for a thread */
-void set_thread_msg(void)
-{
- int threadid;
- struct task_struct *thread = NULL;
- char *ptr;
-
- switch (in_buffer[1]) {
-
- /* To select which thread for gG etc messages, i.e. supported */
- case 'g':
-
- ptr = &in_buffer[2];
- hex_to_int(&ptr, &threadid);
- thread = get_thread(threadid);
-
- /* If we haven't found it */
- if (!thread) {
- send_err_msg();
- break;
- }
-
- /* Set current_thread (or not) */
- if (thread == trapped_thread)
- current_thread = NULL;
- else
- current_thread = thread;
- send_ok_msg();
- break;
-
- /* To select which thread for cCsS messages, i.e. unsupported */
- case 'c':
- send_ok_msg();
- break;
-
- default:
- send_empty_msg();
- break;
- }
-}
-
-/* Is a thread alive? */
-static void thread_status_msg(void)
-{
- char *ptr;
- int threadid;
- struct task_struct *thread = NULL;
-
- ptr = &in_buffer[1];
- hex_to_int(&ptr, &threadid);
- thread = get_thread(threadid);
- if (thread)
- send_ok_msg();
- else
- send_err_msg();
-}
-/* Send the current thread ID */
-static void thread_id_msg(void)
-{
- int threadid;
- threadref thref;
-
- out_buffer[0] = 'Q';
- out_buffer[1] = 'C';
-
- if (current_thread)
- threadid = current_thread->pid;
- else if (trapped_thread)
- threadid = trapped_thread->pid;
- else /* Impossible, but just in case! */
- {
- send_err_msg();
- return;
- }
-
- /* Translate pid 0 to PID_MAX for gdb */
- if (threadid == 0) threadid = PID_MAX;
-
- int_to_threadref(&thref, threadid);
- pack_threadid(out_buffer + 2, &thref);
- out_buffer[2 + BUF_THREAD_ID_SIZE] = '\0';
- put_packet(out_buffer);
-}
-
-/* Send thread info */
-static void thread_info_msg(void)
-{
- struct task_struct *thread = NULL;
- int threadid;
- char *pos;
- threadref thref;
-
- /* Start with 'm' */
- out_buffer[0] = 'm';
- pos = &out_buffer[1];
-
- /* For all possible thread IDs - this will overrun if > 44 threads! */
- /* Start at 1 and include PID_MAX (since GDB won't use pid 0...) */
- for (threadid = 1; threadid <= PID_MAX; threadid++) {
-
- read_lock(&tasklist_lock);
- thread = get_thread(threadid);
- read_unlock(&tasklist_lock);
-
- /* If it's a valid thread */
- if (thread) {
- int_to_threadref(&thref, threadid);
- pack_threadid(pos, &thref);
- pos += BUF_THREAD_ID_SIZE;
- *pos++ = ',';
- }
- }
- *--pos = 0; /* Lose final comma */
- put_packet(out_buffer);
-
-}
-
-/* Return printable info for gdb's 'info threads' command */
-static void thread_extra_info_msg(void)
-{
- int threadid;
- struct task_struct *thread = NULL;
- char buffer[20], *ptr;
- int i;
-
- /* Extract thread ID */
- ptr = &in_buffer[17];
- hex_to_int(&ptr, &threadid);
- thread = get_thread(threadid);
-
- /* If we don't recognise it, say so */
- if (thread == NULL)
- strcpy(buffer, "(unknown)");
- else
- strcpy(buffer, thread->comm);
-
- /* Construct packet */
- for (i = 0, ptr = out_buffer; buffer[i]; i++)
- ptr = pack_hex_byte(ptr, buffer[i]);
-
- if (thread->thread.pc == (unsigned long)ret_from_fork) {
- strcpy(buffer, "<new fork>");
- for (i = 0; buffer[i]; i++)
- ptr = pack_hex_byte(ptr, buffer[i]);
- }
-
- *ptr = '\0';
- put_packet(out_buffer);
-}
-
-/* Handle all qFooBarBaz messages - have to use an if statement as
- opposed to a switch because q messages can have > 1 char id. */
-static void query_msg(void)
-{
- const char *q_start = &in_buffer[1];
-
- /* qC = return current thread ID */
- if (strncmp(q_start, "C", 1) == 0)
- thread_id_msg();
-
- /* qfThreadInfo = query all threads (first) */
- else if (strncmp(q_start, "fThreadInfo", 11) == 0)
- thread_info_msg();
-
- /* qsThreadInfo = query all threads (subsequent). We know we have sent
- them all after the qfThreadInfo message, so there are no to send */
- else if (strncmp(q_start, "sThreadInfo", 11) == 0)
- put_packet("l"); /* el = last */
-
- /* qThreadExtraInfo = supply printable information per thread */
- else if (strncmp(q_start, "ThreadExtraInfo", 15) == 0)
- thread_extra_info_msg();
-
- /* Unsupported - empty message as per spec */
- else
- send_empty_msg();
+ kgdb_regs_to_gdb_regs(&trap_registers, registers);
+ hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
+ gdb_regs_to_kgdb_regs(registers, &trap_registers);
+ send_ok_msg();
}
-#endif /* CONFIG_KGDB_THREAD */
+#ifdef CONFIG_SH_KGDB_CONSOLE
/*
* Bring up the ports..
*/
@@ -1185,6 +824,9 @@ static int kgdb_serial_setup(void)
return 0;
}
+#else
+#define kgdb_serial_setup() 0
+#endif
/* The command loop, read and act on requests */
static void kgdb_command_loop(const int excep_code, const int trapa_value)
@@ -1193,7 +835,7 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
if (excep_code == NMI_VEC) {
#ifndef CONFIG_KGDB_NMI
- KGDB_PRINTK("Ignoring unexpected NMI?\n");
+ printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n");
return;
#else /* CONFIG_KGDB_NMI */
if (!kgdb_enabled) {
@@ -1207,19 +849,10 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
if (!kgdb_enabled)
return;
-#ifdef CONFIG_KGDB_THREAD
- /* Until GDB specifies a thread */
- current_thread = NULL;
- trapped_thread = current;
-#endif
-
/* Enter GDB mode (e.g. after detach) */
if (!kgdb_in_gdb_mode) {
/* Do serial setup, notify user, issue preemptive ack */
- kgdb_serial_setup();
- KGDB_PRINTK("Waiting for GDB (on %s%d at %d baud)\n",
- (kgdb_porttype ? kgdb_porttype->name : ""),
- kgdb_portnum, kgdb_baud);
+ printk(KERN_NOTICE "KGDB: Waiting for GDB\n");
kgdb_in_gdb_mode = 1;
put_debug_char('+');
}
@@ -1233,21 +866,18 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
will later be replaced by its original one. Do NOT do this for
trap 0xff, since that indicates a compiled-in breakpoint which
will not be replaced (and we would retake the trap forever) */
- if ((excep_code == TRAP_VEC) && (trapa_value != (0xff << 2))) {
+ if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2)))
trap_registers.pc -= 2;
- }
/* Undo any stepping we may have done */
undo_single_step();
while (1) {
-
out_buffer[0] = 0;
get_packet(in_buffer, BUFMAX);
/* Examine first char of buffer to see what we need to do */
switch (in_buffer[0]) {
-
case '?': /* Send which signal we've received */
send_signal_msg(sigval);
break;
@@ -1291,21 +921,6 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
step_msg();
return;
-#ifdef CONFIG_KGDB_THREAD
-
- case 'H': /* Task related */
- set_thread_msg();
- break;
-
- case 'T': /* Query thread status */
- thread_status_msg();
- break;
-
- case 'q': /* Handle query - currently thread-related */
- query_msg();
- break;
-#endif
-
case 'k': /* 'Kill the program' with a kernel ? */
break;
@@ -1323,11 +938,8 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
}
/* There has been an exception, most likely a breakpoint. */
-asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs __regs)
+static void handle_exception(struct pt_regs *regs)
{
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
int excep_code, vbr_val;
int count;
int trapa_value = ctrl_inl(TRA);
@@ -1355,7 +967,7 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
kgdb_trapa_val = trapa_value;
/* Act on the exception */
- kgdb_command_loop(excep_code >> 5, trapa_value);
+ kgdb_command_loop(excep_code, trapa_value);
kgdb_current = NULL;
@@ -1373,14 +985,12 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
asm("ldc %0, vbr": :"r"(vbr_val));
}
-/* Trigger a breakpoint by function */
-void breakpoint(void)
+asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs __regs)
{
- if (!kgdb_enabled) {
- kgdb_enabled = 1;
- kgdb_init();
- }
- BREAKPOINT();
+ struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+ handle_exception(regs);
}
/* Initialise the KGDB data structures and serial configuration */
@@ -1395,24 +1005,16 @@ int kgdb_init(void)
kgdb_in_gdb_mode = 0;
if (kgdb_serial_setup() != 0) {
- KGDB_PRINTK("serial setup error\n");
+ printk(KERN_NOTICE "KGDB: serial setup error\n");
return -1;
}
/* Init ptr to exception handler */
- kgdb_debug_hook = kgdb_handle_exception;
+ kgdb_debug_hook = handle_exception;
kgdb_bus_err_hook = kgdb_handle_bus_error;
/* Enter kgdb now if requested, or just report init done */
- if (kgdb_halt) {
- kgdb_in_gdb_mode = 1;
- put_debug_char('+');
- breakpoint();
- }
- else
- {
- KGDB_PRINTK("stub is initialized.\n");
- }
+ printk(KERN_NOTICE "KGDB: stub is initialized.\n");
return 0;
}
@@ -1437,7 +1039,7 @@ static void kgdb_msg_write(const char *s, unsigned count)
/* Calculate how many this time */
wcount = (count > MAXOUT) ? MAXOUT : count;
-
+
/* Pack in hex chars */
for (i = 0; i < wcount; i++)
bufptr = pack_hex_byte(bufptr, s[i]);
@@ -1467,3 +1069,25 @@ void kgdb_console_write(struct console *co, const char *s, unsigned count)
kgdb_msg_write(s, count);
}
#endif
+
+#ifdef CONFIG_KGDB_SYSRQ
+static void sysrq_handle_gdb(int key, struct tty_struct *tty)
+{
+ printk("Entering GDB stub\n");
+ breakpoint();
+}
+
+static struct sysrq_key_op sysrq_gdb_op = {
+ .handler = sysrq_handle_gdb,
+ .help_msg = "Gdb",
+ .action_msg = "GDB",
+};
+
+static int gdb_register_sysrq(void)
+{
+ printk("Registering GDB sysrq handler\n");
+ register_sysrq_key('g', &sysrq_gdb_op);
+ return 0;
+}
+module_init(gdb_register_sysrq);
+#endif
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 08587cdb64d..790ed69b866 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -59,13 +59,13 @@ static void kexec_info(struct kimage *image)
printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
i,
(unsigned int)image->segment[i].mem,
- (unsigned int)image->segment[i].mem + image->segment[i].memsz,
+ (unsigned int)image->segment[i].mem +
+ image->segment[i].memsz,
(unsigned int)image->segment[i].memsz);
- }
+ }
printk(" start : 0x%08x\n\n", (unsigned int)image->start);
}
-
/*
* Do not allocate memory (or fail in any way) in machine_kexec().
* We are past the point of no return, committed to rebooting now.
@@ -101,6 +101,27 @@ NORET_TYPE void machine_kexec(struct kimage *image)
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+ (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
}
+/* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never sets it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init parse_crashkernel(char *arg)
+{
+ unsigned long size, base;
+ size = memparse(arg, &arg);
+ if (*arg == '@') {
+ base = memparse(arg+1, &arg);
+ /* FIXME: Do I want a sanity check
+ * to validate the memory range?
+ */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ return 0;
+}
+early_param("crashkernel", parse_crashkernel);
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index e7607366ac4..329b3f3051d 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -7,7 +7,7 @@
*
* SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
* Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- * Copyright (C) 2002 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*/
#include <linux/module.h>
#include <linux/mm.h>
@@ -15,6 +15,7 @@
#include <linux/pm.h>
#include <linux/kallsyms.h>
#include <linux/kexec.h>
+#include <asm/kdebug.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/ubc.h>
@@ -299,7 +300,8 @@ static void ubc_set_tracing(int asid, unsigned long pc)
ctrl_outl(0, UBC_BAMRA);
if (current_cpu_data.type == CPU_SH7729 ||
- current_cpu_data.type == CPU_SH7710) {
+ current_cpu_data.type == CPU_SH7710 ||
+ current_cpu_data.type == CPU_SH7712) {
ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
} else {
@@ -495,6 +497,10 @@ asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5,
/* Rewind */
regs->pc -= 2;
+ if (notify_die(DIE_TRAP, regs, regs->tra & 0xff,
+ SIGTRAP) == NOTIFY_STOP)
+ return;
+
force_sig(SIGTRAP, current);
}
@@ -510,6 +516,10 @@ asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5,
/* Rewind */
regs->pc -= 2;
+ if (notify_die(DIE_TRAP, regs, TRAPA_BUG_OPCODE & 0xff,
+ SIGTRAP) == NOTIFY_STOP)
+ return;
+
#ifdef CONFIG_BUG
if (__kernel_text_address(instruction_pointer(regs))) {
u16 insn = *(u16 *)instruction_pointer(regs);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 98802ab2821..477d2a854fc 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -4,7 +4,7 @@
* This file handles the architecture-dependent parts of initialization
*
* Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*/
#include <linux/screen_info.h>
#include <linux/ioport.h>
@@ -15,21 +15,22 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/utsname.h>
+#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/pfn.h>
#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/kexec.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/clock.h>
+#include <asm/mmu_context.h>
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_parse_options(char *options);
-#endif
extern void * __rd_start, * __rd_end;
+
/*
* Machine setup..
*/
@@ -205,53 +206,33 @@ static int __init sh_mv_setup(char **cmdline_p)
return 0;
}
-void __init setup_arch(char **cmdline_p)
+/*
+ * Register fully available low RAM pages with the bootmem allocator.
+ */
+static void __init register_bootmem_low_pages(void)
{
- unsigned long bootmap_size;
- unsigned long start_pfn, max_pfn, max_low_pfn;
-
-#ifdef CONFIG_CMDLINE_BOOL
- strcpy(COMMAND_LINE, CONFIG_CMDLINE);
-#endif
-
- ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) _text;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = (unsigned long) _end;
-
- code_resource.start = (unsigned long)virt_to_phys(_text);
- code_resource.end = (unsigned long)virt_to_phys(_etext)-1;
- data_resource.start = (unsigned long)virt_to_phys(_etext);
- data_resource.end = (unsigned long)virt_to_phys(_edata)-1;
-
- sh_mv_setup(cmdline_p);
-
+ unsigned long curr_pfn, last_pfn, pages;
/*
- * Find the highest page frame number we have available
+ * We are rounding up the start address of usable memory:
*/
- max_pfn = PFN_DOWN(__pa(memory_end));
+ curr_pfn = PFN_UP(__MEMORY_START);
/*
- * Determine low and high memory ranges:
+ * ... and at the end of the usable range downwards:
*/
- max_low_pfn = max_pfn;
+ last_pfn = PFN_DOWN(__pa(memory_end));
- /*
- * Partially used pages are not usable - thus
- * we are rounding upwards:
- */
- start_pfn = PFN_UP(__pa(_end));
+ if (last_pfn > max_low_pfn)
+ last_pfn = max_low_pfn;
+
+ pages = last_pfn - curr_pfn;
+ free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
+}
+
+void __init setup_bootmem_allocator(unsigned long start_pfn)
+{
+ unsigned long bootmap_size;
/*
* Find a proper area for the bootmem bitmap. After this
@@ -259,31 +240,11 @@ void __init setup_arch(char **cmdline_p)
* is intact) must be done via bootmem_alloc().
*/
bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
- __MEMORY_START>>PAGE_SHIFT,
- max_low_pfn);
- /*
- * Register fully available low RAM pages with the bootmem allocator.
- */
- {
- unsigned long curr_pfn, last_pfn, pages;
-
- /*
- * We are rounding up the start address of usable memory:
- */
- curr_pfn = PFN_UP(__MEMORY_START);
- /*
- * ... and at the end of the usable range downwards:
- */
- last_pfn = PFN_DOWN(__pa(memory_end));
+ min_low_pfn, max_low_pfn);
- if (last_pfn > max_low_pfn)
- last_pfn = max_low_pfn;
-
- pages = last_pfn - curr_pfn;
- free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
- PFN_PHYS(pages));
- }
+ register_bootmem_low_pages();
+ node_set_online(0);
/*
* Reserve the kernel text and
@@ -292,14 +253,14 @@ void __init setup_arch(char **cmdline_p)
* case of us accidentally initializing the bootmem allocator with
* an invalid RAM area.
*/
- reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
+ reserve_bootmem(__MEMORY_START+PAGE_SIZE,
(PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
* enabling clean reboots, SMP operation, laptop functions.
*/
- reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
+ reserve_bootmem(__MEMORY_START, PAGE_SIZE);
#ifdef CONFIG_BLK_DEV_INITRD
ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
@@ -313,8 +274,8 @@ void __init setup_arch(char **cmdline_p)
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
- reserve_bootmem_node(NODE_DATA(0), INITRD_START +
- __MEMORY_START, INITRD_SIZE);
+ reserve_bootmem(INITRD_START + __MEMORY_START,
+ INITRD_SIZE);
initrd_start = INITRD_START + PAGE_OFFSET +
__MEMORY_START;
initrd_end = initrd_start + INITRD_SIZE;
@@ -327,6 +288,76 @@ void __init setup_arch(char **cmdline_p)
}
}
#endif
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1);
+#endif
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+static void __init setup_memory(void)
+{
+ unsigned long start_pfn;
+
+ /*
+ * Partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ start_pfn = PFN_UP(__pa(_end));
+ setup_bootmem_allocator(start_pfn);
+}
+#else
+extern void __init setup_memory(void);
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+ enable_mmu();
+
+#ifdef CONFIG_CMDLINE_BOOL
+ strcpy(COMMAND_LINE, CONFIG_CMDLINE);
+#endif
+
+ ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+
+#ifdef CONFIG_BLK_DEV_RAM
+ rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+ rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+ rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+
+ if (!MOUNT_ROOT_RDONLY)
+ root_mountflags &= ~MS_RDONLY;
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
+
+ code_resource.start = virt_to_phys(_text);
+ code_resource.end = virt_to_phys(_etext)-1;
+ data_resource.start = virt_to_phys(_etext);
+ data_resource.end = virt_to_phys(_edata)-1;
+
+ parse_early_param();
+
+ sh_mv_setup(cmdline_p);
+
+ /*
+ * Find the highest page frame number we have available
+ */
+ max_pfn = PFN_DOWN(__pa(memory_end));
+
+ /*
+ * Determine low and high memory ranges:
+ */
+ max_low_pfn = max_pfn;
+ min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
+
+ nodes_clear(node_online_map);
+ setup_memory();
+ paging_init();
+ sparse_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
@@ -335,8 +366,6 @@ void __init setup_arch(char **cmdline_p)
/* Perform the machine specific initialisation */
if (likely(sh_mv.mv_setup))
sh_mv.mv_setup(cmdline_p);
-
- paging_init();
}
struct sh_machine_vector* __init get_mv_byname(const char* name)
@@ -380,6 +409,7 @@ static const char *cpu_name[] = {
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
+ [CPU_SH7712] = "SH7712",
[CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750",
[CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R",
[CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R",
@@ -477,7 +507,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
c->loops_per_jiffy/(500000/HZ),
(c->loops_per_jiffy/(5000/HZ)) % 100);
- return show_clocks(m);
+ return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
@@ -499,92 +529,3 @@ struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */
-
-#ifdef CONFIG_SH_KGDB
-/*
- * Parse command-line kgdb options. By default KGDB is enabled,
- * entered on error (or other action) using default serial info.
- * The command-line option can include a serial port specification
- * and an action to override default or configured behavior.
- */
-struct kgdb_sermap kgdb_sci_sermap =
-{ "ttySC", 5, kgdb_sci_setup, NULL };
-
-struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap;
-struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap;
-
-void kgdb_register_sermap(struct kgdb_sermap *map)
-{
- struct kgdb_sermap *last;
-
- for (last = kgdb_serlist; last->next; last = last->next)
- ;
- last->next = map;
- if (!map->namelen) {
- map->namelen = strlen(map->name);
- }
-}
-
-static int __init kgdb_parse_options(char *options)
-{
- char c;
- int baud;
-
- /* Check for port spec (or use default) */
-
- /* Determine port type and instance */
- if (!memcmp(options, "tty", 3)) {
- struct kgdb_sermap *map = kgdb_serlist;
-
- while (map && memcmp(options, map->name, map->namelen))
- map = map->next;
-
- if (!map) {
- KGDB_PRINTK("unknown port spec in %s\n", options);
- return -1;
- }
-
- kgdb_porttype = map;
- kgdb_serial_setup = map->setup_fn;
- kgdb_portnum = options[map->namelen] - '0';
- options += map->namelen + 1;
-
- options = (*options == ',') ? options+1 : options;
-
- /* Read optional parameters (baud/parity/bits) */
- baud = simple_strtoul(options, &options, 10);
- if (baud != 0) {
- kgdb_baud = baud;
-
- c = toupper(*options);
- if (c == 'E' || c == 'O' || c == 'N') {
- kgdb_parity = c;
- options++;
- }
-
- c = *options;
- if (c == '7' || c == '8') {
- kgdb_bits = c;
- options++;
- }
- options = (*options == ',') ? options+1 : options;
- }
- }
-
- /* Check for action specification */
- if (!memcmp(options, "halt", 4)) {
- kgdb_halt = 1;
- options += 4;
- } else if (!memcmp(options, "disabled", 8)) {
- kgdb_enabled = 0;
- options += 8;
- }
-
- if (*options) {
- KGDB_PRINTK("ignored unknown options: %s\n", options);
- return 0;
- }
- return 1;
-}
-__setup("kgdb=", kgdb_parse_options);
-#endif /* CONFIG_SH_KGDB */
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 6e0d10fac4a..17f0b50c567 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -65,7 +65,6 @@ EXPORT_SYMBOL(__div64_32);
/* These symbols are generated by the compiler itself */
DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__udivdi3);
DECLARE_EXPORT(__sdivsi3);
DECLARE_EXPORT(__ashrdi3);
DECLARE_EXPORT(__ashldi3);
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index e060e71d078..ad1ede52fc9 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -148,7 +148,9 @@ static int tmu_timer_init(void)
/* Start TMU0 */
tmu_timer_stop();
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7785)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index e9f168f60f9..7b40f0ff3df 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -5,7 +5,7 @@
* SuperH version: Copyright (C) 1999 Niibe Yutaka
* Copyright (C) 2000 Philipp Rumpf
* Copyright (C) 2000 David Howells
- * Copyright (C) 2002 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -18,10 +18,12 @@
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/io.h>
+#include <linux/bug.h>
#include <linux/debug_locks.h>
#include <linux/limits.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/kdebug.h>
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
@@ -74,7 +76,21 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
}
}
-DEFINE_SPINLOCK(die_lock);
+ATOMIC_NOTIFIER_HEAD(shdie_chain);
+
+int register_die_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&shdie_chain, nb);
+}
+EXPORT_SYMBOL(register_die_notifier);
+
+int unregister_die_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_unregister(&shdie_chain, nb);
+}
+EXPORT_SYMBOL(unregister_die_notifier);
+
+static DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
{
@@ -130,40 +146,6 @@ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
return -EFAULT;
}
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-static inline void do_bug_verbose(struct pt_regs *regs)
-{
- struct bug_frame f;
- long len;
-
- if (__copy_from_user(&f, (const void __user *)regs->pc,
- sizeof(struct bug_frame)))
- return;
-
- len = __strnlen_user(f.file, PATH_MAX) - 1;
- if (unlikely(len < 0 || len >= PATH_MAX))
- f.file = "<bad filename>";
- len = __strnlen_user(f.func, PATH_MAX) - 1;
- if (unlikely(len < 0 || len >= PATH_MAX))
- f.func = "<bad function>";
-
- printk(KERN_ALERT "kernel BUG in %s() at %s:%d!\n",
- f.func, f.file, f.line);
-}
-#else
-static inline void do_bug_verbose(struct pt_regs *regs)
-{
-}
-#endif /* CONFIG_DEBUG_BUGVERBOSE */
-
-void handle_BUG(struct pt_regs *regs)
-{
- do_bug_verbose(regs);
- die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
-}
-#endif /* CONFIG_BUG */
-
/*
* handle an instruction that does an unaligned memory access by emulating the
* desired behaviour
@@ -888,6 +870,25 @@ void __init trap_init(void)
per_cpu_trap_init();
}
+#ifdef CONFIG_BUG
+void handle_BUG(struct pt_regs *regs)
+{
+ enum bug_trap_type tt;
+ tt = report_bug(regs->pc);
+ if (tt == BUG_TRAP_TYPE_WARN) {
+ regs->pc += 2;
+ return;
+ }
+
+ die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
+}
+
+int is_valid_bugaddr(unsigned long addr)
+{
+ return addr >= PAGE_OFFSET;
+}
+#endif
+
void show_trace(struct task_struct *tsk, unsigned long *sp,
struct pt_regs *regs)
{
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 2f606d0ce1f..d83143cc5ca 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -34,9 +34,11 @@ SECTIONS
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
+ _etext = .; /* End of text section */
+
RODATA
- _etext = .; /* End of text section */
+ BUG_TABLE
.data : { /* Data */
*(.data)
@@ -53,6 +55,10 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.page_aligned) }
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
. = ALIGN(PAGE_SIZE);
__per_cpu_start = .;
@@ -110,43 +116,10 @@ SECTIONS
* it's a module.
*/
/DISCARD/ : {
- *(.exit.text)
- *(.exit.data)
*(.exitcall.exit)
}
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging section are relative to the beginning
- of the section so we begin .debug at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
+ STABS_DEBUG
+
+ DWARF_DEBUG
}
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index 0b9cca5c7cb..e23dd1a3fcc 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -3,11 +3,9 @@
#
lib-y = delay.o memset.o memmove.o memchr.o \
- checksum.o strlen.o div64.o udivdi3.o \
- div64-generic.o
+ checksum.o strlen.o div64.o div64-generic.o
memcpy-y := memcpy.o
memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o
lib-y += $(memcpy-y)
-
diff --git a/arch/sh/lib/udivdi3.c b/arch/sh/lib/udivdi3.c
deleted file mode 100644
index 68f038bf3c5..00000000000
--- a/arch/sh/lib/udivdi3.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Simple __udivdi3 function which doesn't use FPU.
- */
-
-#include <linux/types.h>
-
-extern u64 __xdiv64_32(u64 n, u32 d);
-extern void panic(const char * fmt, ...);
-
-u64 __udivdi3(u64 n, u64 d)
-{
- if (d & ~0xffffffff)
- panic("Need true 64-bit/64-bit division");
- return __xdiv64_32(n, (u32)d);
-}
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 6b0d28ac924..12f3d394dc2 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -67,6 +67,7 @@ config CPU_SUBTYPE_SH7300
config CPU_SUBTYPE_SH7705
bool "Support SH7705 processor"
select CPU_SH3
+ select CPU_HAS_IPR_IRQ
select CPU_HAS_PINT_IRQ
config CPU_SUBTYPE_SH7706
@@ -101,9 +102,17 @@ config CPU_SUBTYPE_SH7709
config CPU_SUBTYPE_SH7710
bool "Support SH7710 processor"
select CPU_SH3
+ select CPU_HAS_IPR_IRQ
help
Select SH7710 if you have a SH3-DSP SH7710 CPU.
+config CPU_SUBTYPE_SH7712
+ bool "Support SH7712 processor"
+ select CPU_SH3
+ select CPU_HAS_IPR_IRQ
+ help
+ Select SH7712 if you have a SH3-DSP SH7712 CPU.
+
comment "SH-4 Processor Support"
config CPU_SUBTYPE_SH7750
@@ -283,6 +292,17 @@ config VSYSCALL
For systems with an MMU that can afford to give up a page,
(the default value) say Y.
+config NODES_SHIFT
+ int
+ default "1"
+ depends on NEED_MULTIPLE_NODES
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
choice
prompt "Kernel page size"
default PAGE_SIZE_4KB
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index fa5d7f0b9f1..0ecc117cade 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -2,7 +2,7 @@
* Page fault handler for SH with an MMU.
*
* Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2007 Paul Mundt
*
* Based on linux/arch/i386/mm/fault.c:
* Copyright (C) 1995 Linus Torvalds
@@ -15,12 +15,42 @@
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
+#include <asm/kdebug.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
#include <asm/kgdb.h>
-extern void die(const char *,struct pt_regs *,long);
+#ifdef CONFIG_KPROBES
+ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+
+/* Hook to register for page fault notifications */
+int register_page_fault_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
+}
+
+int unregister_page_fault_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
+}
+
+static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
+ int trap, int sig)
+{
+ struct die_args args = {
+ .regs = regs,
+ .trapnr = trap,
+ };
+ return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
+}
+#else
+static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
+ int trap, int sig)
+{
+ return NOTIFY_DONE;
+}
+#endif
/*
* This routine handles page faults. It determines the address,
@@ -39,6 +69,11 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
siginfo_t info;
trace_hardirqs_on();
+
+ if (notify_page_fault(DIE_PAGE_FAULT, regs,
+ writeaccess, SIGSEGV) == NOTIFY_STOP)
+ return;
+
local_irq_enable();
#ifdef CONFIG_SH_KGDB
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ae957a93237..4d030988b36 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -1,37 +1,20 @@
-/* $Id: init.c,v 1.19 2004/02/21 04:42:16 kkojima Exp $
- *
- * linux/arch/sh/mm/init.c
+/*
+ * linux/arch/sh/mm/init.c
*
* Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2004 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*
* Based on linux/arch/i386/mm/init.c:
* Copyright (C) 1995 Linus Torvalds
*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
-#include <linux/smp.h>
#include <linux/init.h>
-#include <linux/highmem.h>
#include <linux/bootmem.h>
-#include <linux/pagemap.h>
#include <linux/proc_fs.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
+#include <linux/percpu.h>
+#include <linux/io.h>
#include <asm/mmu_context.h>
-#include <asm/io.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/cache.h>
@@ -39,37 +22,51 @@
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
pgd_t swapper_pg_dir[PTRS_PER_PGD];
-#ifdef CONFIG_MMU
-/* It'd be good if these lines were in the standard header file. */
-#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
-#endif
-
void (*copy_page)(void *from, void *to);
void (*clear_page)(void *to);
void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ int total = 0, reserved = 0, free = 0;
+ int shared = 0, cached = 0, slab = 0;
+ pg_data_t *pgdat;
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
- i = max_mapnr;
- while (i-- > 0) {
- total++;
- if (PageReserved(mem_map+i))
- reserved++;
- else if (PageSwapCache(mem_map+i))
- cached++;
- else if (page_count(mem_map+i))
- shared += page_count(mem_map+i) - 1;
+
+ for_each_online_pgdat(pgdat) {
+ struct page *page, *end;
+ unsigned long flags;
+
+ pgdat_resize_lock(pgdat, &flags);
+ page = pgdat->node_mem_map;
+ end = page + pgdat->node_spanned_pages;
+
+ do {
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (PageSlab(page))
+ slab++;
+ else if (!page_count(page))
+ free++;
+ else
+ shared += page_count(page) - 1;
+ page++;
+ } while (page < end);
+
+ pgdat_resize_unlock(pgdat, &flags);
}
- printk("%d pages of RAM\n",total);
- printk("%d reserved pages\n",reserved);
- printk("%d pages shared\n",shared);
- printk("%d pages swap cached\n",cached);
+
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ printk("%d pages of RAM\n", total);
+ printk("%d free pages\n", free);
+ printk("%d reserved pages\n", reserved);
+ printk("%d slab pages\n", slab);
+ printk("%d pages shared\n", shared);
+ printk("%d pages swap cached\n", cached);
}
#ifdef CONFIG_MMU
@@ -147,52 +144,38 @@ extern char __init_begin, __init_end;
*/
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+ int nid;
- /*
- * Setup some defaults for the zone sizes.. these should be safe
- * regardless of distcontiguous memory or MMU settings.
- */
- zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT;
-#endif
-
-#ifdef CONFIG_MMU
- /*
- * If we have an MMU, and want to be using it .. we need to adjust
- * the zone sizes accordingly, in addition to turning it on.
- */
- {
- /* We don't need to map the kernel through the TLB, as
- * it is permanatly mapped using P1. So clear the
- * entire pgd. */
- memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
- /* Turn on the MMU */
- enable_mmu();
- zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN;
- }
+ /* We don't need to map the kernel through the TLB, as
+ * it is permanatly mapped using P1. So clear the
+ * entire pgd. */
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
/* Set an initial value for the MMU.TTB so we don't have to
* check for a null value. */
set_TTB(swapper_pg_dir);
-#elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
- /*
- * If we don't have CONFIG_MMU set and the processor in question
- * still has an MMU, care needs to be taken to make sure it doesn't
- * stay on.. Since the boot loader could have potentially already
- * turned it on, and we clearly don't want it, we simply turn it off.
- *
- * We don't need to do anything special for the zone sizes, since the
- * default values that were already configured up above should be
- * satisfactory.
- */
- disable_mmu();
-#endif
- NODE_DATA(0)->node_mem_map = NULL;
- free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ unsigned long low, start_pfn;
+
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+
+ start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+ low = pgdat->bdata->node_low_pfn;
+
+ max_zone_pfns[ZONE_NORMAL] = low;
+ add_active_range(nid, start_pfn, low);
+
+ printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
+ nid, start_pfn, low);
+
+ free_area_init_nodes(max_zone_pfns);
+
+ printk("Node %u: mem_map starts at %p\n",
+ pgdat->node_id, pgdat->node_mem_map);
+ }
}
static struct kcore_list kcore_mem, kcore_vmalloc;
@@ -200,18 +183,33 @@ static struct kcore_list kcore_mem, kcore_vmalloc;
void __init mem_init(void)
{
int codesize, reservedpages, datasize, initsize;
- int tmp;
- extern unsigned long memory_start;
+ int nid;
-#ifdef CONFIG_MMU
- high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
-#else
- extern unsigned long memory_end;
+ reservedpages = 0;
- high_memory = (void *)(memory_end & PAGE_MASK);
-#endif
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+ unsigned long node_pages = 0;
+ void *node_high_memory;
+ int i;
+
+ num_physpages += pgdat->node_present_pages;
+
+ if (pgdat->node_spanned_pages)
+ node_pages = free_all_bootmem_node(pgdat);
+
+ totalram_pages += node_pages;
- max_mapnr = num_physpages = MAP_NR(high_memory) - MAP_NR(memory_start);
+ for (i = 0; i < node_pages; i++)
+ if (PageReserved(pgdat->node_mem_map + i))
+ reservedpages++;
+
+ node_high_memory = (void *)((pgdat->node_start_pfn +
+ pgdat->node_spanned_pages) <<
+ PAGE_SHIFT);
+ if (node_high_memory > high_memory)
+ high_memory = node_high_memory;
+ }
/* clear the zero-page */
memset(empty_zero_page, 0, PAGE_SIZE);
@@ -229,16 +227,6 @@ void __init mem_init(void)
clear_page = clear_page_nommu;
#endif
- /* this will put all low memory onto the freelists */
- totalram_pages += free_all_bootmem_node(NODE_DATA(0));
- reservedpages = 0;
- for (tmp = 0; tmp < num_physpages; tmp++)
- /*
- * Only count reserved RAM pages
- */
- if (PageReserved(mem_map+tmp))
- reservedpages++;
-
codesize = (unsigned long) &_etext - (unsigned long) &_text;
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
@@ -250,7 +238,7 @@ void __init mem_init(void)
printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
"%dk reserved, %dk data, %dk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
- max_mapnr << (PAGE_SHIFT-10),
+ totalram_pages << (PAGE_SHIFT-10),
codesize >> 10,
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
@@ -289,4 +277,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
}
#endif
-
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 4fe0f94cbf4..554f801db67 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -9,6 +9,7 @@ SE SH_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7300SE SH_7300_SOLUTION_ENGINE
7343SE SH_7343_SOLUTION_ENGINE
+7780SE SH_7780_SOLUTION_ENGINE
73180SE SH_73180_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
@@ -26,6 +27,7 @@ SH03 SH_SH03
LANDISK SH_LANDISK
R7780RP SH_R7780RP
R7780MP SH_R7780MP
+R7785RP SH_R7785RP
TITAN SH_TITAN
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW