aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLennert Buytenhek <buytenh@wantstofly.org>2006-03-28 21:18:54 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-03-28 21:18:54 +0100
commitc4713074375c61f939310b04e92090afe29810dc (patch)
treef09441eac8bd29a4a48f0360e1207d6def04b5fd /arch
parente9937d4b0a9382c4c78411d1c53e62be396ee9a9 (diff)
[ARM] 3388/1: ixp23xx: add core ixp23xx support
Patch from Lennert Buytenhek This patch adds support for the Intel ixp23xx series of CPUs. The ixp23xx is an XSC3 based CPU with 512K of L2 cache, a 64bit 66MHz PCI interface, two DDR RAM interfaces, QDR RAM interfaces, two gigabit MACs, two 10/100 MACs, expansion bus, four microengines, a Media and Switch Fabric unit almost identical to the one on the ixp2400, two xscale (8250ish) UARTs and a bunch of other stuff. This patch adds the core ixp23xx support code, and support for the ADI Engineering Roadrunner, Intel IXDP2351, and IP Fabrics Double Espresso platforms. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig11
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/mach-ixp23xx/Kconfig25
-rw-r--r--arch/arm/mach-ixp23xx/Makefile11
-rw-r--r--arch/arm/mach-ixp23xx/Makefile.boot2
-rw-r--r--arch/arm/mach-ixp23xx/core.c431
-rw-r--r--arch/arm/mach-ixp23xx/espresso.c69
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c325
-rw-r--r--arch/arm/mach-ixp23xx/pci.c275
-rw-r--r--arch/arm/mach-ixp23xx/roadrunner.c164
10 files changed, 1313 insertions, 1 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0dd24ebdf6a..427c7214011 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -148,6 +148,12 @@ config ARCH_IXP2000
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
+ select PCI
+ help
+ Support for Intel's IXP23xx (XScale) family of processors.
+
config ARCH_L7200
bool "LinkUp-L7200"
select FIQ
@@ -269,6 +275,8 @@ source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-ixp2000/Kconfig"
+source "arch/arm/mach-ixp23xx/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
@@ -787,7 +795,8 @@ source "drivers/acorn/block/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || ARCH_IXP23XX
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0f571d3d2fa..ce3e804ea0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -98,6 +98,7 @@ endif
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
+ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
incdir-$(CONFIG_ARCH_OMAP) := omap
diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig
new file mode 100644
index 00000000000..982670ec386
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_IXP23XX
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+ bool
+ default y
+
+menu "Intel IXP23xx Implementation Options"
+
+comment "IXP23xx Platforms"
+
+config MACH_ESPRESSO
+ bool "Support IP Fabrics Double Espresso platform"
+ help
+
+config MACH_IXDP2351
+ bool "Support Intel IXDP2351 platform"
+ help
+
+config MACH_ROADRUNNER
+ bool "Support ADI RoadRunner platform"
+ help
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile
new file mode 100644
index 00000000000..288b371b6d0
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y := core.o pci.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_MACH_ESPRESSO) += espresso.o
+obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o
+obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o
diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot
new file mode 100644
index 00000000000..d5561ad15ba
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
new file mode 100644
index 00000000000..092ee12ced4
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-ixp23xx/core.c
+ *
+ * Core routines for IXP23xx chips
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+
+
+/*************************************************************************
+ * Chip specific mappings shared by all IXP23xx systems
+ *************************************************************************/
+static struct map_desc ixp23xx_io_desc[] __initdata = {
+ { /* XSI-CPP CSRs */
+ .virtual = IXP23XX_XSI2CPP_CSR_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
+ .length = IXP23XX_XSI2CPP_CSR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* Expansion Bus Config */
+ .virtual = IXP23XX_EXP_CFG_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
+ .length = IXP23XX_EXP_CFG_SIZE,
+ .type = MT_DEVICE,
+ }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
+ .virtual = IXP23XX_PERIPHERAL_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
+ .length = IXP23XX_PERIPHERAL_SIZE,
+ .type = MT_DEVICE,
+ }, { /* CAP CSRs */
+ .virtual = IXP23XX_CAP_CSR_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
+ .length = IXP23XX_CAP_CSR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* MSF CSRs */
+ .virtual = IXP23XX_MSF_CSR_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
+ .length = IXP23XX_MSF_CSR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI I/O Space */
+ .virtual = IXP23XX_PCI_IO_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
+ .length = IXP23XX_PCI_IO_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI Config Space */
+ .virtual = IXP23XX_PCI_CFG_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
+ .length = IXP23XX_PCI_CFG_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI local CFG CSRs */
+ .virtual = IXP23XX_PCI_CREG_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
+ .length = IXP23XX_PCI_CREG_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI MEM Space */
+ .virtual = IXP23XX_PCI_MEM_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
+ .length = IXP23XX_PCI_MEM_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+void __init ixp23xx_map_io(void)
+{
+ iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
+}
+
+
+/***************************************************************************
+ * IXP23xx Interrupt Handling
+ ***************************************************************************/
+enum ixp23xx_irq_type {
+ IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
+};
+
+static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
+
+static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
+{
+ int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+ u32 int_style;
+ enum ixp23xx_irq_type irq_type;
+ volatile u32 *int_reg;
+
+ /*
+ * Only GPIOs 6-15 are wired to interrupts on IXP23xx
+ */
+ if (line < 6 || line > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQT_BOTHEDGE:
+ int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
+ irq_type = IXP23XX_IRQ_EDGE;
+ break;
+ case IRQT_RISING:
+ int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
+ irq_type = IXP23XX_IRQ_EDGE;
+ break;
+ case IRQT_FALLING:
+ int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
+ irq_type = IXP23XX_IRQ_EDGE;
+ break;
+ case IRQT_HIGH:
+ int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
+ irq_type = IXP23XX_IRQ_LEVEL;
+ break;
+ case IRQT_LOW:
+ int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
+ irq_type = IXP23XX_IRQ_LEVEL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ixp23xx_config_irq(irq, irq_type);
+
+ if (line >= 8) { /* pins 8-15 */
+ line -= 8;
+ int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
+ } else { /* pins 0-7 */
+ int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
+ }
+
+ /*
+ * Clear pending interrupts
+ */
+ *IXP23XX_GPIO_GPISR = (1 << line);
+
+ /* Clear the style for the appropriate pin */
+ *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
+ (line * IXP23XX_GPIO_STYLE_SIZE));
+
+ /* Set the new style */
+ *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
+
+ return 0;
+}
+
+static void ixp23xx_irq_mask(unsigned int irq)
+{
+ volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+ *intr_reg &= ~(1 << (irq % 32));
+}
+
+static void ixp23xx_irq_ack(unsigned int irq)
+{
+ int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+
+ if ((line < 6) || (line > 15))
+ return;
+
+ *IXP23XX_GPIO_GPISR = (1 << line);
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp23xx_irq_level_unmask(unsigned int irq)
+{
+ volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+ ixp23xx_irq_ack(irq);
+
+ *intr_reg |= (1 << (irq % 32));
+}
+
+static void ixp23xx_irq_edge_unmask(unsigned int irq)
+{
+ volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+ *intr_reg |= (1 << (irq % 32));
+}
+
+static struct irqchip ixp23xx_irq_level_chip = {
+ .ack = ixp23xx_irq_mask,
+ .mask = ixp23xx_irq_mask,
+ .unmask = ixp23xx_irq_level_unmask,
+ .set_type = ixp23xx_irq_set_type
+};
+
+static struct irqchip ixp23xx_irq_edge_chip = {
+ .ack = ixp23xx_irq_ack,
+ .mask = ixp23xx_irq_mask,
+ .unmask = ixp23xx_irq_edge_unmask,
+ .set_type = ixp23xx_irq_set_type
+};
+
+static void ixp23xx_pci_irq_mask(unsigned int irq)
+{
+ *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+static void ixp23xx_pci_irq_unmask(unsigned int irq)
+{
+ *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+/*
+ * TODO: Should this just be done at ASM level?
+ */
+static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ u32 pci_interrupt;
+ unsigned int irqno;
+ struct irqdesc *int_desc;
+
+ pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
+
+ desc->chip->ack(irq);
+
+ /* See which PCI_INTA, or PCI_INTB interrupted */
+ if (pci_interrupt & (1 << 26)) {
+ irqno = IRQ_IXP23XX_INTB;
+ } else if (pci_interrupt & (1 << 27)) {
+ irqno = IRQ_IXP23XX_INTA;
+ } else {
+ BUG();
+ }
+
+ int_desc = irq_desc + irqno;
+ int_desc->handle(irqno, int_desc, regs);
+
+ desc->chip->unmask(irq);
+}
+
+static struct irqchip ixp23xx_pci_irq_chip = {
+ .ack = ixp23xx_pci_irq_mask,
+ .mask = ixp23xx_pci_irq_mask,
+ .unmask = ixp23xx_pci_irq_unmask
+};
+
+static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
+{
+ switch (type) {
+ case IXP23XX_IRQ_LEVEL:
+ set_irq_chip(irq, &ixp23xx_irq_level_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ break;
+ case IXP23XX_IRQ_EDGE:
+ set_irq_chip(irq, &ixp23xx_irq_edge_chip);
+ set_irq_handler(irq, do_edge_IRQ);
+ break;
+ }
+ set_irq_flags(irq, IRQF_VALID);
+}
+
+void __init ixp23xx_init_irq(void)
+{
+ int irq;
+
+ /* Route everything to IRQ */
+ *IXP23XX_INTR_SEL1 = 0x0;
+ *IXP23XX_INTR_SEL2 = 0x0;
+ *IXP23XX_INTR_SEL3 = 0x0;
+ *IXP23XX_INTR_SEL4 = 0x0;
+
+ /* Mask all sources */
+ *IXP23XX_INTR_EN1 = 0x0;
+ *IXP23XX_INTR_EN2 = 0x0;
+ *IXP23XX_INTR_EN3 = 0x0;
+ *IXP23XX_INTR_EN4 = 0x0;
+
+ /*
+ * Configure all IRQs for level-sensitive operation
+ */
+ for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
+ ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
+ }
+
+ for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
+ set_irq_chip(irq, &ixp23xx_pci_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
+}
+
+
+/*************************************************************************
+ * Timer-tick functions for IXP23xx
+ *************************************************************************/
+#define CLOCK_TICKS_PER_USEC CLOCK_TICK_RATE / (USEC_PER_SEC)
+
+static unsigned long next_jiffy_time;
+
+static unsigned long
+ixp23xx_gettimeoffset(void)
+{
+ unsigned long elapsed;
+
+ elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
+
+ return elapsed / CLOCK_TICKS_PER_USEC;
+}
+
+static irqreturn_t
+ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+ while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) {
+ timer_tick(regs);
+ next_jiffy_time += LATCH;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ixp23xx_timer_irq = {
+ .name = "IXP23xx Timer Tick",
+ .handler = ixp23xx_timer_interrupt,
+ .flags = SA_INTERRUPT | SA_TIMER,
+};
+
+void __init ixp23xx_init_timer(void)
+{
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+
+ /* Setup the Timer counter value */
+ *IXP23XX_TIMER1_RELOAD =
+ (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
+
+ *IXP23XX_TIMER_CONT = 0;
+ next_jiffy_time = LATCH;
+
+ /* Connect the interrupt handler and enable the interrupt */
+ setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
+}
+
+struct sys_timer ixp23xx_timer = {
+ .init = ixp23xx_init_timer,
+ .offset = ixp23xx_gettimeoffset,
+};
+
+
+/*************************************************************************
+ * IXP23xx Platform Initializaion
+ *************************************************************************/
+static struct resource ixp23xx_uart_resources[] = {
+ {
+ .start = IXP23XX_UART1_PHYS,
+ .end = IXP23XX_UART1_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = IXP23XX_UART2_PHYS,
+ .end = IXP23XX_UART2_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct plat_serial8250_port ixp23xx_uart_data[] = {
+ {
+ .mapbase = IXP23XX_UART1_PHYS,
+ .membase = (char *)(IXP23XX_UART1_VIRT + 3),
+ .irq = IRQ_IXP23XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP23XX_UART_XTAL,
+ }, {
+ .mapbase = IXP23XX_UART2_PHYS,
+ .membase = (char *)(IXP23XX_UART2_VIRT + 3),
+ .irq = IRQ_IXP23XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP23XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device ixp23xx_uart = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = ixp23xx_uart_data,
+ .num_resources = 2,
+ .resource = ixp23xx_uart_resources,
+};
+
+static struct platform_device *ixp23xx_devices[] __initdata = {
+ &ixp23xx_uart,
+};
+
+void __init ixp23xx_sys_init(void)
+{
+ platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
+}
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
new file mode 100644
index 00000000000..2327c979041
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-ixp23xx/espresso.c
+ *
+ * Double Espresso-specific routines
+ *
+ * Author: Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+static void __init espresso_init(void)
+{
+ physmap_configure(0x90000000, 0x02000000, 2, NULL);
+
+ /*
+ * Mark flash as writeable.
+ */
+ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+
+ ixp23xx_sys_init();
+}
+
+MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
+ /* Maintainer: Lennert Buytenhek */
+ .phys_io = IXP23XX_PERIPHERAL_PHYS,
+ .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+ .map_io = ixp23xx_map_io,
+ .init_irq = ixp23xx_init_irq,
+ .timer = &ixp23xx_timer,
+ .boot_params = 0x00000100,
+ .init_machine = espresso_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
new file mode 100644
index 00000000000..00146c35daa
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -0,0 +1,325 @@
+/*
+ * arch/arm/mach-ixp23xx/ixdp2351.c
+ *
+ * IXDP2351 board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * IXDP2351 Interrupt Handling
+ */
+static void ixdp2351_inta_mask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_unmask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ u16 ex_interrupt =
+ *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
+ int i;
+
+ desc->chip->mask(irq);
+
+ for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
+ if (ex_interrupt & (1 << i)) {
+ struct irqdesc *cpld_desc;
+ int cpld_irq =
+ IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
+ cpld_desc = irq_desc + cpld_irq;
+ cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ }
+ }
+
+ desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_inta_chip = {
+ .ack = ixdp2351_inta_mask,
+ .mask = ixdp2351_inta_mask,
+ .unmask = ixdp2351_inta_unmask
+};
+
+static void ixdp2351_intb_mask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_unmask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ u16 ex_interrupt =
+ *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
+ int i;
+
+ desc->chip->ack(irq);
+
+ for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
+ if (ex_interrupt & (1 << i)) {
+ struct irqdesc *cpld_desc;
+ int cpld_irq =
+ IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
+ cpld_desc = irq_desc + cpld_irq;
+ cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ }
+ }
+
+ desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_intb_chip = {
+ .ack = ixdp2351_intb_mask,
+ .mask = ixdp2351_intb_mask,
+ .unmask = ixdp2351_intb_unmask
+};
+
+void ixdp2351_init_irq(void)
+{
+ int irq;
+
+ /* Mask all interrupts from CPLD, disable simulation */
+ *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
+ *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
+ *IXDP2351_CPLD_INTA_SIM_REG = 0;
+ *IXDP2351_CPLD_INTB_SIM_REG = 0;
+
+ ixp23xx_init_irq();
+
+ for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
+ irq <
+ IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
+ irq++) {
+ if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
+ set_irq_flags(irq, IRQF_VALID);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_chip(irq, &ixdp2351_inta_chip);
+ }
+ }
+
+ for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
+ irq <
+ IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
+ irq++) {
+ if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
+ set_irq_flags(irq, IRQF_VALID);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_chip(irq, &ixdp2351_intb_chip);
+ }
+ }
+
+ set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler);
+ set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler);
+}
+
+/*
+ * IXDP2351 PCI
+ */
+
+/*
+ * This board does not do normal PCI IRQ routing, or any
+ * sort of swizzling, so we just need to check where on the
+ * bus the device is and figure out what CPLD pin it is
+ * being routed to.
+ */
+#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
+
+static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ u8 bus = dev->bus->number;
+ u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
+ struct pci_bus *tmp_bus = dev->bus;
+
+ /* Primary bus, no interrupts here */
+ if (!bus)
+ return -1;
+
+ /* Lookup first leaf in bus tree */
+ while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
+ tmp_bus = tmp_bus->parent;
+
+ /* Select between known bridges */
+ switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
+ /* Device is located after first bridge */
+ case 0x0008:
+ if (tmp_bus == dev->bus) {
+ /* Device is located directy after first bridge */
+ switch (devpin) {
+ /* Onboard 82546 */
+ case DEVPIN(1, 1): /* Onboard 82546 ch 0 */
+ return IRQ_IXDP2351_INTA_82546;
+ case DEVPIN(1, 2): /* Onboard 82546 ch 1 */
+ return IRQ_IXDP2351_INTB_82546;
+ /* PMC SLOT */
+ case DEVPIN(0, 1): /* PMCP INTA# */
+ case DEVPIN(2, 4): /* PMCS INTD# */
+ return IRQ_IXDP2351_SPCI_PMC_INTA;
+ case DEVPIN(0, 2): /* PMCP INTB# */
+ case DEVPIN(2, 1): /* PMCS INTA# */
+ return IRQ_IXDP2351_SPCI_PMC_INTB;
+ case DEVPIN(0, 3): /* PMCP INTC# */
+ case DEVPIN(2, 2): /* PMCS INTB# */
+ return IRQ_IXDP2351_SPCI_PMC_INTC;
+ case DEVPIN(0, 4): /* PMCP INTD# */
+ case DEVPIN(2, 3): /* PMCS INTC# */
+ return IRQ_IXDP2351_SPCI_PMC_INTD;
+ }
+ } else {
+ /* Device is located indirectly after first bridge */
+ /* Not supported now */
+ return -1;
+ }
+ break;
+ case 0x0010:
+ if (tmp_bus == dev->bus) {
+ /* Device is located directy after second bridge */
+ /* Secondary bus of second bridge */
+ switch (devpin) {
+ case DEVPIN(0, 1): /* DB#0 */
+ case DEVPIN(0, 2):
+ case DEVPIN(0, 3):
+ case DEVPIN(0, 4):
+ return IRQ_IXDP2351_SPCI_DB_0;
+ case DEVPIN(1, 1): /* DB#1 */
+ case DEVPIN(1, 2):
+ case DEVPIN(1, 3):
+ case DEVPIN(1, 4):
+ return IRQ_IXDP2351_SPCI_DB_1;
+ case DEVPIN(2, 1): /* FIC1 */
+ case DEVPIN(2, 2):
+ case DEVPIN(2, 3):
+ case DEVPIN(2, 4):
+ case DEVPIN(3, 1): /* FIC2 */
+ case DEVPIN(3, 2):
+ case DEVPIN(3, 3):
+ case DEVPIN(3, 4):
+ return IRQ_IXDP2351_SPCI_FIC;
+ }
+ } else {
+ /* Device is located indirectly after second bridge */
+ /* Not supported now */
+ return -1;
+ }
+ break;
+ }
+
+ return -1;
+}
+
+struct hw_pci ixdp2351_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = ixp23xx_pci_preinit,
+ .setup = ixp23xx_pci_setup,
+ .scan = ixp23xx_pci_scan_bus,
+ .map_irq = ixdp2351_map_irq,
+};
+
+int __init ixdp2351_pci_init(void)
+{
+ if (machine_is_ixdp2351())
+ pci_common_init(&ixdp2351_pci);
+
+ return 0;
+}
+
+subsys_initcall(ixdp2351_pci_init);
+
+/*
+ * IXDP2351 Static Mapped I/O
+ */
+static struct map_desc ixdp2351_io_desc[] __initdata = {
+ {
+ .virtual = IXDP2351_NP_VIRT_BASE,
+ .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
+ .length = IXDP2351_NP_PHYS_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXDP2351_BB_BASE_VIRT,
+ .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
+ .length = IXDP2351_BB_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init ixdp2351_map_io(void)
+{
+ ixp23xx_map_io();
+ iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
+}
+
+static void __init ixdp2351_init(void)
+{
+ physmap_configure(0x90000000, 0x04000000, 1, NULL);
+
+ /*
+ * Mark flash as writeable
+ */
+ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+ ixp23xx_sys_init();
+}
+
+MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
+ /* Maintainer: MontaVista Software, Inc. */
+ .phys_io = IXP23XX_PERIPHERAL_PHYS,
+ .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+ .map_io = ixdp2351_map_io,
+ .init_irq = ixdp2351_init_irq,
+ .timer = &ixp23xx_timer,
+ .boot_params = 0x00000100,
+ .init_machine = ixdp2351_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
new file mode 100644
index 00000000000..5330ad78c1b
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+ u32 *paddress;
+
+ /*
+ * Must be dword aligned
+ */
+ where &= ~3;
+
+ /*
+ * For top bus, generate type 0, else type 1
+ */
+ if (!bus_nr) {
+ if (PCI_SLOT(devfn) >= 8)
+ return 0;
+
+ paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+ | (1 << (PCI_SLOT(devfn) + 16))
+ | (PCI_FUNC(devfn) << 8) | where);
+ } else {
+ paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+ | (bus_nr << 16)
+ | (PCI_SLOT(devfn) << 11)
+ | (PCI_FUNC(devfn) << 8) | where);
+ }
+
+ return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+ /*0*/ 0,
+ /*1*/ 0xff,
+ /*2*/ 0xffff,
+ /*3*/ 0,
+ /*4*/ 0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ u32 n;
+ u32 *addr;
+
+ n = where % 4;
+
+ DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+ addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ pci_master_aborts = 0;
+ *value = (*addr >> (8*n)) & bytemask[size];
+ if (pci_master_aborts) {
+ pci_master_aborts = 0;
+ *value = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ u32 mask;
+ u32 *addr;
+ u32 temp;
+
+ mask = ~(bytemask[size] << ((where % 0x4) * 8));
+ addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ temp = (u32) (value) << ((where % 0x4) * 8);
+ *addr = (*addr & mask) | temp;
+
+ clear_master_aborts();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+ .read = ixp23xx_pci_read_config,
+ .write = ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+ return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ volatile unsigned long temp;
+ unsigned long flags;
+
+ pci_master_aborts = 1;
+
+ local_irq_save(flags);
+ temp = *IXP23XX_PCI_CONTROL;
+
+ /*
+ * master abort and cmd tgt err
+ */
+ if (temp & ((1 << 8) | (1 << 5)))
+ *IXP23XX_PCI_CONTROL = temp;
+
+ temp = *IXP23XX_PCI_CMDSTAT;
+
+ if (temp & (1 << 29))
+ *IXP23XX_PCI_CMDSTAT = temp;
+ local_irq_restore(flags);
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ return 0;
+}
+
+int clear_master_aborts(void)
+{
+ volatile u32 temp;
+
+ temp = *IXP23XX_PCI_CONTROL;
+
+ /*
+ * master abort and cmd tgt err
+ */
+ if (temp & ((1 << 8) | (1 << 5)))
+ *IXP23XX_PCI_CONTROL = temp;
+
+ temp = *IXP23XX_PCI_CMDSTAT;
+
+ if (temp & (1 << 29))
+ *IXP23XX_PCI_CMDSTAT = temp;
+
+ return 0;
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+#ifdef __ARMEB__
+ *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */
+#endif
+ /*
+ * ADDR_31 needs to be clear for PCI memory access to CPP memory
+ */
+ *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+ *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+ /*
+ * Select correct memory for PCI inbound transactions
+ */
+ if (ixp23xx_cpp_boot()) {
+ *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+ } else {
+ *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+ }
+
+ hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+ "PCI config cycle to non-existent device");
+
+ *IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+ int i;
+
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+ .start = IXP23XX_PCI_MEM_START,
+ .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+ .start = 0x00000100,
+ .end = 0x01ffffff,
+ .flags = IORESOURCE_IO,
+ .name = "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr >= 1)
+ return 0;
+
+ sys->resource[0] = &ixp23xx_pci_io_space;
+ sys->resource[1] = &ixp23xx_pci_mem_space;
+ sys->resource[2] = NULL;
+
+ return 1;
+}
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
new file mode 100644
index 00000000000..43c14e74079
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ixp23xx/roadrunner.c
+ *
+ * RoadRunner board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * Interrupt mapping
+ */
+#define INTA IRQ_ROADRUNNER_PCI_INTA
+#define INTB IRQ_ROADRUNNER_PCI_INTB
+#define INTC IRQ_ROADRUNNER_PCI_INTC
+#define INTD IRQ_ROADRUNNER_PCI_INTD
+
+#define INTC_PIN IXP23XX_GPIO_PIN_11
+#define INTD_PIN IXP23XX_GPIO_PIN_12
+
+static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+ static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
+ static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
+ static int usb_irq[] = {INTB, INTC, INTD, -1};
+ static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
+ static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
+
+ switch(dev->bus->number) {
+ case 0:
+ switch(dev->devfn) {
+ case 0x0: // PCI-PCI bridge
+ break;
+ case 0x8: // PCI Card Slot
+ return pci_card_slot_irq[pin - 1];
+ case 0x10: // PMC Slot
+ return pmc_card_slot_irq[pin - 1];
+ case 0x18: // PMC Slot Secondary Agent
+ break;
+ case 0x20: // IXP Processor
+ break;
+ default:
+ return NO_IRQ;
+ }
+ break;
+
+ case 1:
+ switch(dev->devfn) {
+ case 0x0: // IDE Controller
+ return (pin == 1) ? INTC : -1;
+ case 0x8: // USB fun 0
+ case 0x9: // USB fun 1
+ case 0xa: // USB fun 2
+ return usb_irq[pin - 1];
+ case 0x10: // Mini PCI 1
+ return mini_pci_1_irq[pin-1];
+ case 0x18: // Mini PCI 2
+ return mini_pci_2_irq[pin-1];
+ case 0x20: // MEM slot
+ return (pin == 1) ? INTA : -1;
+ default:
+ return NO_IRQ;
+ }
+ break;
+
+ default:
+ return NO_IRQ;
+ }
+
+ return NO_IRQ;
+}
+
+static void roadrunner_pci_preinit(void)
+{
+ set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
+ set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+
+ ixp23xx_pci_preinit();
+}
+
+static struct hw_pci roadrunner_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = roadrunner_pci_preinit,
+ .setup = ixp23xx_pci_setup,
+ .scan = ixp23xx_pci_scan_bus,
+ .map_irq = roadrunner_map_irq,
+};
+
+static int __init roadrunner_pci_init(void)
+{
+ if (machine_is_roadrunner())
+ pci_common_init(&roadrunner_pci);
+
+ return 0;
+};
+
+subsys_initcall(roadrunner_pci_init);
+
+static void __init roadrunner_init(void)
+{
+ physmap_configure(0x90000000, 0x04000000, 2, NULL);
+
+ /*
+ * Mark flash as writeable
+ */
+ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+ ixp23xx_sys_init();
+}
+
+MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
+ /* Maintainer: Deepak Saxena */
+ .phys_io = IXP23XX_PERIPHERAL_PHYS,
+ .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+ .map_io = ixp23xx_map_io,
+ .init_irq = ixp23xx_init_irq,
+ .timer = &ixp23xx_timer,
+ .boot_params = 0x00000100,
+ .init_machine = roadrunner_init,
+MACHINE_END