aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
diff options
context:
space:
mode:
authorMagnus Damm <damm@igel.co.jp>2007-06-15 10:41:54 +0900
committerPaul Mundt <lethal@linux-sh.org>2007-06-15 10:41:54 +0900
commitd619500aed2f9b841b2310bc94f8056ae9ca2a73 (patch)
tree42ca07266afbf0406d419e57dde404ad89cd316d /arch/sh
parentd3efbdd6c5e8c823b732df26a355ec931ccab374 (diff)
downloadlinux-2.6.34-ux500-d619500aed2f9b841b2310bc94f8056ae9ca2a73.tar.gz
sh: rework intc2 code
The shared intc2 code currently contains cpu-specific #ifdefs. This is a tad unclean and it prevents us from using the shared code to drive board-specific irqs on the se7780 board. This patch reworks the intc2 code by moving the base addresses of the intc2 registers into struct intc2_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. One logic change has been made - the original shared intc2 code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh')
-rw-r--r--arch/sh/boards/se/7780/irq.c45
-rw-r--r--arch/sh/kernel/cpu/irq/intc2.c58
-rw-r--r--arch/sh/kernel/cpu/sh4/setup-sh7760.c15
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7780.c15
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7785.c16
5 files changed, 84 insertions, 65 deletions
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
index 3d0625c2d07..87491474600 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/se/7780/irq.c
@@ -16,28 +16,6 @@
#include <asm/io.h>
#include <asm/se7780.h>
-#define INTC_INTMSK0 0xFFD00044
-#define INTC_INTMSKCLR0 0xFFD00064
-
-static void disable_se7780_irq(unsigned int irq)
-{
- struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
-}
-
-static void enable_se7780_irq(unsigned int irq)
-{
- struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
-}
-
-static struct irq_chip se7780_irq_chip __read_mostly = {
- .name = "SE7780",
- .mask = disable_se7780_irq,
- .unmask = enable_se7780_irq,
- .mask_ack = disable_se7780_irq,
-};
-
static struct intc2_data intc2_irq_table[] = {
{ 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
{ 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
@@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = {
{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0, /* N/A */
+ .msk_base = 0xffd00044,
+ .mskclr_base = 0xffd00064,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-se7780",
+ },
+};
+
/*
* Initialize IRQ setting
*/
void __init init_se7780_IRQ(void)
{
- int i ;
-
/* enable all interrupt at FPGA */
ctrl_outw(0, FPGA_INTMSK1);
/* mask SM501 interrupt */
@@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void)
/* FPGA + 0x0A */
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
- for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
- disable_irq_nosync(intc2_irq_table[i].irq);
- set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
- handle_level_irq, "level");
- set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
- disable_se7780_irq(intc2_irq_table[i].irq);
- }
+ register_intc2_controller(&intc2_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index d8e22f4ff0f..dae02d3152e 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -14,36 +14,26 @@
#include <linux/interrupt.h>
#include <linux/io.h>
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE 0xfe080000
-#define INTC2_INTMSK (INTC2_BASE + 0x40)
-#define INTC2_INTMSKCLR (INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define INTC2_BASE 0xffd40000
-#define INTC2_INTMSK (INTC2_BASE + 0x38)
-#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c)
-#endif
+static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
+{
+ struct irq_chip *chip = get_irq_chip(irq);
+ return (void *)((char *)chip - offsetof(struct intc2_desc, chip));
+}
static void disable_intc2_irq(unsigned int irq)
{
struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
+ struct intc2_desc *d = get_intc2_desc(irq);
+ ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset);
}
static void enable_intc2_irq(unsigned int irq)
{
struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
+ struct intc2_desc *d = get_intc2_desc(irq);
+ ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset);
}
-static struct irq_chip intc2_irq_chip = {
- .name = "INTC2",
- .mask = disable_intc2_irq,
- .unmask = enable_intc2_irq,
- .mask_ack = disable_intc2_irq,
-};
-
/*
* Setup an INTC2 style interrupt.
* NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
@@ -56,30 +46,36 @@ static struct irq_chip intc2_irq_chip = {
*
* in the intc2_data table.
*/
-void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
+void register_intc2_controller(struct intc2_desc *desc)
{
int i;
- for (i = 0; i < nr_irqs; i++) {
+ desc->chip.mask = disable_intc2_irq;
+ desc->chip.unmask = enable_intc2_irq;
+ desc->chip.mask_ack = disable_intc2_irq;
+
+ for (i = 0; i < desc->nr_irqs; i++) {
unsigned long ipr, flags;
- struct intc2_data *p = table + i;
+ struct intc2_data *p = desc->intc2_data + i;
disable_irq_nosync(p->irq);
- /* Set the priority level */
- local_irq_save(flags);
+ if (desc->prio_base) {
+ /* Set the priority level */
+ local_irq_save(flags);
- ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
- ipr &= ~(0xf << p->ipr_shift);
- ipr |= p->priority << p->ipr_shift;
- ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
+ ipr = ctrl_inl(desc->prio_base + p->ipr_offset);
+ ipr &= ~(0xf << p->ipr_shift);
+ ipr |= p->priority << p->ipr_shift;
+ ctrl_outl(ipr, desc->prio_base + p->ipr_offset);
- local_irq_restore(flags);
+ local_irq_restore(flags);
+ }
- set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
+ set_irq_chip_and_handler_name(p->irq, &desc->chip,
handle_level_irq, "level");
set_irq_chip_data(p->irq, p);
- enable_intc2_irq(p->irq);
+ disable_intc2_irq(p->irq);
}
}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index b7c702821e6..6d3c9189777 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -96,6 +96,19 @@ static struct intc2_data intc2_irq_table[] = {
{109,12, 0, 4, 0, 3}, /* CMTI */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xfe080000,
+ .msk_base = 0xfe080040,
+ .mskclr_base = 0xfe080060,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-sh7760",
+ },
+};
+
static struct ipr_data sh7760_ipr_map[] = {
/* IRQ, IPR-idx, shift, priority */
{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
@@ -143,7 +156,7 @@ unsigned int map_ipridx_to_addr(int idx)
void __init init_IRQ_intc2(void)
{
- make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+ register_intc2_controller(&intc2_irq_desc);
}
void __init init_IRQ_ipr(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 9aeaa2ddaa2..b57c760bffd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -102,7 +102,20 @@ static struct intc2_data intc2_irq_table[] = {
{ 68, 0x14, 8, 0, 18, 2 }, /* PCIC4 */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xffd40000,
+ .msk_base = 0xffd40038,
+ .mskclr_base = 0xffd4003c,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-sh7780",
+ },
+};
+
void __init init_IRQ_intc2(void)
{
- make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+ register_intc2_controller(&intc2_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 07b0de82cfe..ce10ec5d691 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -97,7 +97,21 @@ static struct intc2_data intc2_irq_table[] = {
{ 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xffd40000,
+ .msk_base = 0xffd40038,
+ .mskclr_base = 0xffd4003c,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-sh7785",
+ },
+};
+
void __init init_IRQ_intc2(void)
{
- make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+ register_intc2_controller(&intc2_irq_desc);
}
+