aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2007-02-14 15:06:09 +0900
committerPaul Mundt <lethal@linux-sh.org>2007-02-14 15:06:09 +0900
commite65fa9f59e9230b72ac298d445b4a18a4eefeb34 (patch)
tree402036274b557da72a93b17fffc95f41c3137704 /arch/sh/boards
parent71074d3a2c70aa8a213222fef5014bfd9b3daf1f (diff)
downloadlinux-2.6.34-ux500-e65fa9f59e9230b72ac298d445b4a18a4eefeb34.tar.gz
sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/bigsur/Makefile6
-rw-r--r--arch/sh/boards/bigsur/io.c120
-rw-r--r--arch/sh/boards/bigsur/irq.c334
-rw-r--r--arch/sh/boards/bigsur/led.c54
-rw-r--r--arch/sh/boards/bigsur/setup.c88
-rw-r--r--arch/sh/boards/ec3104/Makefile6
-rw-r--r--arch/sh/boards/ec3104/io.c81
-rw-r--r--arch/sh/boards/ec3104/irq.c196
-rw-r--r--arch/sh/boards/ec3104/setup.c65
9 files changed, 0 insertions, 950 deletions
diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile
deleted file mode 100644
index 0ff9497ac58..00000000000
--- a/arch/sh/boards/bigsur/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the BigSur specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o led.o
-
diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c
deleted file mode 100644
index 23071f97eec..00000000000
--- a/arch/sh/boards/bigsur/io.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * arch/sh/boards/bigsur/io.c
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * Derived from io_hd64465.h, which bore the message:
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- * and from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for a Hitachi Big Sur Evaluation Board.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/bigsur/bigsur.h>
-
-/* Low iomap maps port 0-1K to addresses in 8byte chunks */
-#define BIGSUR_IOMAP_LO_THRESH 0x400
-#define BIGSUR_IOMAP_LO_SHIFT 3
-#define BIGSUR_IOMAP_LO_MASK ((1<<BIGSUR_IOMAP_LO_SHIFT)-1)
-#define BIGSUR_IOMAP_LO_NMAP (BIGSUR_IOMAP_LO_THRESH>>BIGSUR_IOMAP_LO_SHIFT)
-static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP];
-static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP];
-
-/* High iomap maps port 1K-64K to addresses in 1K chunks */
-#define BIGSUR_IOMAP_HI_THRESH 0x10000
-#define BIGSUR_IOMAP_HI_SHIFT 10
-#define BIGSUR_IOMAP_HI_MASK ((1<<BIGSUR_IOMAP_HI_SHIFT)-1)
-#define BIGSUR_IOMAP_HI_NMAP (BIGSUR_IOMAP_HI_THRESH>>BIGSUR_IOMAP_HI_SHIFT)
-static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP];
-static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP];
-
-void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift)
-{
- u32 port, endport = baseport + nports;
-
- pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n",
- baseport, nports, addr);
-
- for (port = baseport ;
- port < endport && port < BIGSUR_IOMAP_LO_THRESH ;
- port += (1<<BIGSUR_IOMAP_LO_SHIFT)) {
- pr_debug(" maplo[0x%x] = 0x%08x\n", port, addr);
- bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = addr;
- bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift;
- addr += (1<<(BIGSUR_IOMAP_LO_SHIFT));
- }
-
- for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH);
- port < endport && port < BIGSUR_IOMAP_HI_THRESH ;
- port += (1<<BIGSUR_IOMAP_HI_SHIFT)) {
- pr_debug(" maphi[0x%x] = 0x%08x\n", port, addr);
- bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = addr;
- bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift;
- addr += (1<<(BIGSUR_IOMAP_HI_SHIFT));
- }
-}
-EXPORT_SYMBOL(bigsur_port_map);
-
-void bigsur_port_unmap(u32 baseport, u32 nports)
-{
- u32 port, endport = baseport + nports;
-
- pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports);
-
- for (port = baseport ;
- port < endport && port < BIGSUR_IOMAP_LO_THRESH ;
- port += (1<<BIGSUR_IOMAP_LO_SHIFT)) {
- bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0;
- }
-
- for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH);
- port < endport && port < BIGSUR_IOMAP_HI_THRESH ;
- port += (1<<BIGSUR_IOMAP_HI_SHIFT)) {
- bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0;
- }
-}
-EXPORT_SYMBOL(bigsur_port_unmap);
-
-unsigned long bigsur_isa_port2addr(unsigned long port)
-{
- unsigned long addr = 0;
- unsigned char shift;
-
- /* Physical address not in P0, do nothing */
- if (PXSEG(port)) {
- addr = port;
- /* physical address in P0, map to P2 */
- } else if (port >= 0x30000) {
- addr = P2SEGADDR(port);
- /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */
- } else if (port >= BIGSUR_IOMAP_HI_THRESH) {
- addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH);
- /* Handle remapping of high IO/PCI IO ports */
- } else if (port >= BIGSUR_IOMAP_LO_THRESH) {
- addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT];
- shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT];
-
- if (addr != 0)
- addr += (port & BIGSUR_IOMAP_HI_MASK) << shift;
- } else {
- /* Handle remapping of low IO ports */
- addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT];
- shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT];
-
- if (addr != 0)
- addr += (port & BIGSUR_IOMAP_LO_MASK) << shift;
- }
-
- pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr);
-
- return addr;
-}
-
diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c
deleted file mode 100644
index 1ab04da3638..00000000000
--- a/arch/sh/boards/bigsur/irq.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- *
- * Setup and IRQ handling code for the HD64465 companion chip.
- * by Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc
- *
- * Derived from setup_hd64465.c which bore the message:
- * Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc and
- * Copyright (C) 2000 YAEGASHI Takeshi
- * and setup_cqreek.c which bore message:
- * Copyright (C) 2000 Niibe Yutaka
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IRQ functions for a Hitachi Big Sur Evaluation Board.
- *
- */
-#undef DEBUG
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/bigsur/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/bigsur/bigsur.h>
-
-//#define BIGSUR_DEBUG 3
-#undef BIGSUR_DEBUG
-
-#ifdef BIGSUR_DEBUG
-#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args)
-#else
-#define DIPRINTK(n, args...)
-#endif /* BIGSUR_DEBUG */
-
-#ifdef CONFIG_HD64465
-extern int hd64465_irq_demux(int irq);
-#endif /* CONFIG_HD64465 */
-
-
-/*===========================================================*/
-// Big Sur CPLD IRQ Routines
-/*===========================================================*/
-
-/* Level 1 IRQ routines */
-static void disable_bigsur_l1irq(unsigned int irq)
-{
- unsigned char mask;
- unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
- unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) );
-
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- pr_debug("Disable L1 IRQ %d\n", irq);
- DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
- mask_port, bit);
-
- /* Disable IRQ - set mask bit */
- mask = inb(mask_port) | bit;
- outb(mask, mask_port);
- return;
- }
- pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq);
-}
-
-static void enable_bigsur_l1irq(unsigned int irq)
-{
- unsigned char mask;
- unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
- unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) );
-
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- pr_debug("Enable L1 IRQ %d\n", irq);
- DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
- mask_port, bit);
- /* Enable L1 IRQ - clear mask bit */
- mask = inb(mask_port) & ~bit;
- outb(mask, mask_port);
- return;
- }
- pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq);
-}
-
-
-/* Level 2 irq masks and registers for L2 decoding */
-/* Level2 bitmasks for each level 1 IRQ */
-const u32 bigsur_l2irq_mask[] =
- {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03};
-/* Level2 to ISR[n] map for each level 1 IRQ */
-const u32 bigsur_l2irq_reg[] =
- { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2};
-/* Level2 to Level 1 IRQ map */
-const u32 bigsur_l2_l1_map[] =
- {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1};
-/* IRQ inactive level (high or low) */
-const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7};
-
-/* CPLD external status and mask registers base and offsets */
-static const u32 isr_base = BIGSUR_IRQ0;
-static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1;
-static const u32 imr_base = BIGSUR_IMR0;
-static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1;
-
-#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 )
-
-/* Level 2 IRQ routines */
-static void disable_bigsur_l2irq(unsigned int irq)
-{
- unsigned char mask;
- unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
- unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
-
- if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
- pr_debug("Disable L2 IRQ %d\n", irq);
- DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
- mask_port, bit);
-
- /* Disable L2 IRQ - set mask bit */
- mask = inb(mask_port) | bit;
- outb(mask, mask_port);
- return;
- }
- pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq);
-}
-
-static void enable_bigsur_l2irq(unsigned int irq)
-{
- unsigned char mask;
- unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
- unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
-
- if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
- pr_debug("Enable L2 IRQ %d\n", irq);
- DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
- mask_port, bit);
-
- /* Enable L2 IRQ - clear mask bit */
- mask = inb(mask_port) & ~bit;
- outb(mask, mask_port);
- return;
- }
- pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq);
-}
-
-static void mask_and_ack_bigsur(unsigned int irq)
-{
- pr_debug("mask_and_ack_bigsur IRQ %d\n", irq);
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
- disable_bigsur_l1irq(irq);
- else
- disable_bigsur_l2irq(irq);
-}
-
-static void end_bigsur_irq(unsigned int irq)
-{
- pr_debug("end_bigsur_irq IRQ %d\n", irq);
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
- enable_bigsur_l1irq(irq);
- else
- enable_bigsur_l2irq(irq);
- }
-}
-
-static unsigned int startup_bigsur_irq(unsigned int irq)
-{
- u8 mask;
- u32 reg;
-
- pr_debug("startup_bigsur_irq IRQ %d\n", irq);
-
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- /* Enable the L1 IRQ */
- enable_bigsur_l1irq(irq);
- /* Enable all L2 IRQs in this L1 IRQ */
- mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]);
- reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset;
- mask &= inb(reg);
- outb(mask,reg);
- DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg));
- }
- else {
- /* Enable the L2 IRQ - clear mask bit */
- enable_bigsur_l2irq(irq);
- /* Enable the L1 bit masking this L2 IRQ */
- enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]);
- DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n",
- bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq);
- }
- return 0;
-}
-
-static void shutdown_bigsur_irq(unsigned int irq)
-{
- pr_debug("shutdown_bigsur_irq IRQ %d\n", irq);
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
- disable_bigsur_l1irq(irq);
- else
- disable_bigsur_l2irq(irq);
-}
-
-/* Define the IRQ structures for the L1 and L2 IRQ types */
-static struct hw_interrupt_type bigsur_l1irq_type = {
- .typename = "BigSur-CPLD-Level1-IRQ",
- .startup = startup_bigsur_irq,
- .shutdown = shutdown_bigsur_irq,
- .enable = enable_bigsur_l1irq,
- .disable = disable_bigsur_l1irq,
- .ack = mask_and_ack_bigsur,
- .end = end_bigsur_irq
-};
-
-static struct hw_interrupt_type bigsur_l2irq_type = {
- .typename = "BigSur-CPLD-Level2-IRQ",
- .startup = startup_bigsur_irq,
- .shutdown =shutdown_bigsur_irq,
- .enable = enable_bigsur_l2irq,
- .disable = disable_bigsur_l2irq,
- .ack = mask_and_ack_bigsur,
- .end = end_bigsur_irq
-};
-
-
-static void make_bigsur_l1isr(unsigned int irq) {
-
- /* sanity check first */
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- /* save the handler in the main description table */
- irq_desc[irq].chip = &bigsur_l1irq_type;
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = 0;
- irq_desc[irq].depth = 1;
-
- disable_bigsur_l1irq(irq);
- return;
- }
- pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq);
- return;
-}
-
-static void make_bigsur_l2isr(unsigned int irq) {
-
- /* sanity check first */
- if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
- /* save the handler in the main description table */
- irq_desc[irq].chip = &bigsur_l2irq_type;
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = 0;
- irq_desc[irq].depth = 1;
-
- disable_bigsur_l2irq(irq);
- return;
- }
- pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq);
- return;
-}
-
-/* The IRQ's will be decoded as follows:
- * If a level 2 handler exists and there is an unmasked active
- * IRQ, the 2nd level handler will be called.
- * If a level 2 handler does not exist for the active IRQ
- * the 1st level handler will be called.
- */
-
-int bigsur_irq_demux(int irq)
-{
- int dmux_irq = irq;
- u8 mask, actv_irqs;
- u32 reg_num;
-
- DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq);
- /* decode the 1st level IRQ */
- if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- /* Get corresponding L2 ISR bitmask and ISR number */
- mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW];
- reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW];
- /* find the active IRQ's (XOR with inactive level)*/
- actv_irqs = inb(isr_base-reg_num*isr_offset) ^
- bigsur_l2_inactv_state[reg_num];
- /* decode active IRQ's */
- actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset));
- /* if NEZ then we have an active L2 IRQ */
- if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW;
- /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */
- if(!irq_desc[dmux_irq].action && irq_desc[irq].action)
- dmux_irq = irq;
- DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n",
- irq, dmux_irq, mask, reg_num);
- }
-#ifdef CONFIG_HD64465
- dmux_irq = hd64465_irq_demux(dmux_irq);
-#endif /* CONFIG_HD64465 */
- DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq);
-
- return dmux_irq;
-}
-
-/*===========================================================*/
-// Big Sur Init Routines
-/*===========================================================*/
-void __init init_bigsur_IRQ(void)
-{
- int i;
-
- if (!MACH_BIGSUR) return;
-
- /* Create ISR's for Big Sur CPLD IRQ's */
- /*==============================================================*/
- for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++)
- make_bigsur_l1isr(i);
-
- printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n",
- BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH);
-
- for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++)
- make_bigsur_l2isr(i);
-
- printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n",
- BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH);
-
-}
diff --git a/arch/sh/boards/bigsur/led.c b/arch/sh/boards/bigsur/led.c
deleted file mode 100644
index d221439aafc..00000000000
--- a/arch/sh/boards/bigsur/led.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/sh/boards/bigsur/led.c
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * Derived from led_se.c and led.c, which bore the message:
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Big Sur specific LED code.
- */
-
-#include <asm/io.h>
-#include <asm/bigsur/bigsur.h>
-
-static void mach_led(int position, int value)
-{
- int word;
-
- word = bigsur_inl(BIGSUR_CSLR);
- if (value) {
- bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR);
- } else {
- bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED on/off */
-void heartbeat_bigsur(void)
-{
- static unsigned cnt = 0, period = 0, dist = 0;
-
- if (cnt == 0 || cnt == dist)
- mach_led( -1, 1);
- else if (cnt == 7 || cnt == dist+7)
- mach_led( -1, 0);
-
- if (++cnt > period) {
- cnt = 0;
- /* The hyperbolic function below modifies the heartbeat period
- * length in dependency of the current (5min) load. It goes
- * through the points f(0)=126, f(1)=86, f(5)=51,
- * f(inf)->30. */
- period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
- dist = period / 4;
- }
-}
-#endif /* CONFIG_HEARTBEAT */
-
diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c
deleted file mode 100644
index 9711c20fc9e..00000000000
--- a/arch/sh/boards/bigsur/setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- *
- * Setup and IRQ handling code for the HD64465 companion chip.
- * by Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc
- *
- * Derived from setup_hd64465.c which bore the message:
- * Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc and
- * Copyright (C) 2000 YAEGASHI Takeshi
- * and setup_cqreek.c which bore message:
- * Copyright (C) 2000 Niibe Yutaka
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Setup functions for a Hitachi Big Sur Evaluation Board.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/bigsur/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/bigsur/bigsur.h>
-
-/*===========================================================*/
-// Big Sur Init Routines
-/*===========================================================*/
-
-static void __init bigsur_setup(char **cmdline_p)
-{
- /* Mask all 2nd level IRQ's */
- outb(-1,BIGSUR_IMR0);
- outb(-1,BIGSUR_IMR1);
- outb(-1,BIGSUR_IMR2);
- outb(-1,BIGSUR_IMR3);
-
- /* Mask 1st level interrupts */
- outb(-1,BIGSUR_IRLMR0);
- outb(-1,BIGSUR_IRLMR1);
-
-#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL)
- /* remap IO ports for first ISA serial port to HD64465 UART */
- bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
-#endif /* CONFIG_HD64465 && CONFIG_SERIAL */
- /* TODO: setup IDE registers */
- bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8);
- /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */
- bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0);
- /* set page to 1 */
- outw(1, BIGSUR_ETHR+0xe);
- /* set the IO port to BIGSUR_ETHER_IOPORT */
- outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2);
-}
-
-/*
- * The Machine Vector
- */
-extern void heartbeat_bigsur(void);
-extern void init_bigsur_IRQ(void);
-
-struct sh_machine_vector mv_bigsur __initmv = {
- .mv_name = "Big Sur",
- .mv_setup = bigsur_setup,
-
- .mv_isa_port2addr = bigsur_isa_port2addr,
- .mv_irq_demux = bigsur_irq_demux,
-
- .mv_init_irq = init_bigsur_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_bigsur,
-#endif
-};
-ALIAS_MV(bigsur)
diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile
deleted file mode 100644
index 178891534b6..00000000000
--- a/arch/sh/boards/ec3104/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the EC3104 specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c
deleted file mode 100644
index 2f86394b280..00000000000
--- a/arch/sh/boards/ec3104/io.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/sh/boards/ec3104/io.c
- * EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip. While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/ec3104/ec3104.h>
-
-/*
- * EC3104 has a real ISA bus which we redirect low port accesses to (the
- * actual device on mine is a ESS 1868, and I don't want to hack the driver
- * more than strictly necessary). I am not going to duplicate the
- * hard coding of PC addresses (for the 16550s aso) here though; it's just
- * too ugly.
- */
-
-#define low_port(port) ((port) < 0x10000)
-
-static inline unsigned long port2addr(unsigned long port)
-{
- switch(port >> 16) {
- case 0:
- return EC3104_ISA_BASE + port * 2;
-
- /* XXX hack. it's unclear what to do about the serial ports */
- case 1:
- return EC3104_BASE + (port&0xffff) * 4;
-
- default:
- /* XXX PCMCIA */
- return 0;
- }
-}
-
-unsigned char ec3104_inb(unsigned long port)
-{
- u8 ret;
-
- ret = *(volatile u8 *)port2addr(port);
-
- return ret;
-}
-
-unsigned short ec3104_inw(unsigned long port)
-{
- BUG();
-}
-
-unsigned long ec3104_inl(unsigned long port)
-{
- BUG();
-}
-
-void ec3104_outb(unsigned char data, unsigned long port)
-{
- *(volatile u8 *)port2addr(port) = data;
-}
-
-void ec3104_outw(unsigned short data, unsigned long port)
-{
- BUG();
-}
-
-void ec3104_outl(unsigned long data, unsigned long port)
-{
- BUG();
-}
diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c
deleted file mode 100644
index ffa4ff1f090..00000000000
--- a/arch/sh/boards/ec3104/irq.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/sh/boards/ec3104/irq.c
- * EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/ec3104/ec3104.h>
-
-/* This is for debugging mostly; here's the table that I intend to keep
- * in here:
- *
- * index function base addr power interrupt bit
- * 0 power b0ec0000 --- 00000001 (unused)
- * 1 irqs b0ec1000 --- 00000002 (unused)
- * 2 ?? b0ec2000 b0ec0008 00000004
- * 3 PS2 (1) b0ec3000 b0ec000c 00000008
- * 4 PS2 (2) b0ec4000 b0ec0010 00000010
- * 5 ?? b0ec5000 b0ec0014 00000020
- * 6 I2C b0ec6000 b0ec0018 00000040
- * 7 serial (1) b0ec7000 b0ec001c 00000080
- * 8 serial (2) b0ec8000 b0ec0020 00000100
- * 9 serial (3) b0ec9000 b0ec0024 00000200
- * 10 serial (4) b0eca000 b0ec0028 00000400
- * 12 GPIO (1) b0ecc000 b0ec0030
- * 13 GPIO (2) b0ecc000 b0ec0030
- * 16 pcmcia (1) b0ed0000 b0ec0040 00010000
- * 17 pcmcia (2) b0ed1000 b0ec0044 00020000
- */
-
-/* I used the register names from another interrupt controller I worked with,
- * since it seems to be identical to the ec3104 except that all bits are
- * inverted:
- *
- * IRR: Interrupt Request Register (pending and enabled interrupts)
- * IMR: Interrupt Mask Register (which interrupts are enabled)
- * IPR: Interrupt Pending Register (pending interrupts, even disabled ones)
- *
- * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all
- * IRQs seem to be level-triggered.
- */
-
-#define EC3104_IRR (EC3104_BASE + 0x1000)
-#define EC3104_IMR (EC3104_BASE + 0x1004)
-#define EC3104_IPR (EC3104_BASE + 0x1008)
-
-#define ctrl_readl(addr) (*(volatile u32 *)(addr))
-#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data))
-#define ctrl_readb(addr) (*(volatile u8 *)(addr))
-
-static char *ec3104_name(unsigned index)
-{
- switch(index) {
- case 0:
- return "power management";
- case 1:
- return "interrupts";
- case 3:
- return "PS2 (1)";
- case 4:
- return "PS2 (2)";
- case 5:
- return "I2C (1)";
- case 6:
- return "I2C (2)";
- case 7:
- return "serial (1)";
- case 8:
- return "serial (2)";
- case 9:
- return "serial (3)";
- case 10:
- return "serial (4)";
- case 16:
- return "pcmcia (1)";
- case 17:
- return "pcmcia (2)";
- default: {
- static char buf[32];
-
- sprintf(buf, "unknown (%d)", index);
-
- return buf;
- }
- }
-}
-
-int get_pending_interrupts(char *buf)
-{
- u32 ipr;
- u32 bit;
- char *p = buf;
-
- p += sprintf(p, "pending: (");
-
- ipr = ctrl_inl(EC3104_IPR);
-
- for (bit = 1; bit < 32; bit++)
- if (!(ipr & (1<<bit)))
- p += sprintf(p, "%s ", ec3104_name(bit));
-
- p += sprintf(p, ")\n");
-
- return p - buf;
-}
-
-static inline u32 ec3104_irq2mask(unsigned int irq)
-{
- return (1 << (irq - EC3104_IRQBASE));
-}
-
-static inline void mask_ec3104_irq(unsigned int irq)
-{
- u32 mask;
-
- mask = ctrl_readl(EC3104_IMR);
-
- mask |= ec3104_irq2mask(irq);
-
- ctrl_writel(mask, EC3104_IMR);
-}
-
-static inline void unmask_ec3104_irq(unsigned int irq)
-{
- u32 mask;
-
- mask = ctrl_readl(EC3104_IMR);
-
- mask &= ~ec3104_irq2mask(irq);
-
- ctrl_writel(mask, EC3104_IMR);
-}
-
-static void disable_ec3104_irq(unsigned int irq)
-{
- mask_ec3104_irq(irq);
-}
-
-static void enable_ec3104_irq(unsigned int irq)
-{
- unmask_ec3104_irq(irq);
-}
-
-static void mask_and_ack_ec3104_irq(unsigned int irq)
-{
- mask_ec3104_irq(irq);
-}
-
-static void end_ec3104_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- unmask_ec3104_irq(irq);
-}
-
-static unsigned int startup_ec3104_irq(unsigned int irq)
-{
- unmask_ec3104_irq(irq);
-
- return 0;
-}
-
-static void shutdown_ec3104_irq(unsigned int irq)
-{
- mask_ec3104_irq(irq);
-
-}
-
-static struct hw_interrupt_type ec3104_int = {
- .typename = "EC3104",
- .enable = enable_ec3104_irq,
- .disable = disable_ec3104_irq,
- .ack = mask_and_ack_ec3104_irq,
- .end = end_ec3104_irq,
- .startup = startup_ec3104_irq,
- .shutdown = shutdown_ec3104_irq,
-};
-
-/* Yuck. the _demux API is ugly */
-int ec3104_irq_demux(int irq)
-{
- if (irq == EC3104_IRQ) {
- unsigned int mask;
-
- mask = ctrl_readl(EC3104_IRR);
-
- if (mask == 0xffffffff)
- return EC3104_IRQ;
- else
- return EC3104_IRQBASE + ffz(mask);
- }
-
- return irq;
-}
diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c
deleted file mode 100644
index 902bc975a13..00000000000
--- a/arch/sh/boards/ec3104/setup.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/arch/sh/boards/ec3104/setup.c
- * EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip. While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/mach/ec3104.h>
-
-static void __init ec3104_setup(char **cmdline_p)
-{
- char str[8];
- int i;
-
- for (i=0; i<8; i++)
- str[i] = ctrl_readb(EC3104_BASE + i);
-
- for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
- irq_desc[i].handler = &ec3104_int;
-
- printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
- str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
-
- /* mask all interrupts. this should have been done by the boot
- * loader for us but we want to be sure ... */
- ctrl_writel(0xffffffff, EC3104_IMR);
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_ec3104 __initmv = {
- .mv_name = "EC3104",
- .mv_setup = ec3104_setup,
- .mv_nr_irqs = 96,
-
- .mv_inb = ec3104_inb,
- .mv_inw = ec3104_inw,
- .mv_inl = ec3104_inl,
- .mv_outb = ec3104_outb,
- .mv_outw = ec3104_outw,
- .mv_outl = ec3104_outl,
-
- .mv_irq_demux = ec3104_irq_demux,
-};
-ALIAS_MV(ec3104)