Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 183 insertions, 0 deletions

diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..e830d788c10
--- /dev/null
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -0,0 +1,183 @@
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+
+#undef mips		/* CPP really sucks for this job  */
+#define mips mips
+OUTPUT_ARCH(mips)
+ENTRY(kernel_entry)
+jiffies = JIFFIES;
+SECTIONS
+{
+#ifdef CONFIG_BOOT_ELF64
+  /* Read-only sections, merged into text segment: */
+  /* . = 0xc000000000000000; */
+
+  /* This is the value for an Origin kernel, taken from an IRIX kernel.  */
+  /* . = 0xc00000000001c000; */
+
+  /* Set the vaddr for the text segment to a value 
+        >= 0xa800 0000 0001 9000 if no symmon is going to configured
+        >= 0xa800 0000 0030 0000 otherwise  */
+
+  /* . = 0xa800000000300000; */
+  /* . = 0xa800000000300000; */
+  . = 0xffffffff80300000;
+#endif
+  . = LOADADDR;
+  /* read-only */
+  _text = .;			/* Text and read-only data */
+  .text : {
+    *(.text)
+    SCHED_TEXT
+    LOCK_TEXT
+    *(.fixup)
+    *(.gnu.warning)
+  } =0
+
+  _etext = .;			/* End of text section */
+
+  . = ALIGN(16);		/* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  __start___dbe_table = .;	/* Exception table for data bus errors */
+  __dbe_table : { *(__dbe_table) }
+  __stop___dbe_table = .;
+
+  RODATA
+
+  /* writeable */
+  .data : {			/* Data */
+    . = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
+    *(.data.init_task)
+
+    *(.data)
+
+   /* Align the initial ramdisk image (INITRD) on page boundaries. */
+   . = ALIGN(4096);
+   __rd_start = .;
+   *(.initrd)
+   . = ALIGN(4096);
+   __rd_end = .;
+
+    CONSTRUCTORS
+  }
+  _gp = . + 0x8000;
+  .lit8 : { *(.lit8) }
+  .lit4 : { *(.lit4) }
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata     : { *(.sdata) }
+
+  . = ALIGN(4096);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(4096);
+  __nosave_end = .;
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  _edata =  .;			/* End of data section */
+
+  /* will be freed after init */
+  . = ALIGN(4096);		/* Init code and data */
+  __init_begin = .;
+  .init.text : {
+	_sinittext = .;
+	*(.init.text)
+	_einittext = .;
+  }
+  .init.data : { *(.init.data) }
+  . = ALIGN(16);
+  __setup_start = .;
+  .init.setup : { *(.init.setup) }
+  __setup_end = .;
+
+  .early_initcall.init : {
+  __earlyinitcall_start = .;
+	*(.initcall.early1.init)
+  }
+  __earlyinitcall_end = .;
+
+  __initcall_start = .;
+  .initcall.init : {
+	*(.initcall1.init)
+	*(.initcall2.init)
+	*(.initcall3.init)
+	*(.initcall4.init)
+	*(.initcall5.init)
+	*(.initcall6.init)
+	*(.initcall7.init)
+  }
+  __initcall_end = .;
+
+  __con_initcall_start = .;
+  .con_initcall.init : { *(.con_initcall.init) }
+  __con_initcall_end = .;
+  SECURITY_INIT
+  . = ALIGN(4096);
+  __initramfs_start = .;
+  .init.ramfs : { *(.init.ramfs) }
+  __initramfs_end = .;
+  . = ALIGN(32);
+  __per_cpu_start = .;
+  .data.percpu  : { *(.data.percpu) }
+  __per_cpu_end = .;
+  . = ALIGN(4096);
+  __init_end = .;
+  /* freed after init ends here */
+
+  __bss_start = .;		/* BSS */
+  .sbss      : {
+    *(.sbss)
+    *(.scommon)
+  }
+  .bss : {
+    *(.bss)
+    *(COMMON)
+  }
+  __bss_stop = .;
+
+  _end = . ;
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+        *(.exit.text)
+        *(.exit.data)
+        *(.exitcall.exit)
+
+	/* ABI crap starts here */
+	*(.comment)
+	*(.MIPS.options)
+	*(.note)
+	*(.options)
+	*(.pdr)
+	*(.reginfo)
+	*(.mdebug*)
+  }
+
+  /* This is the MIPS specific mdebug section.  */
+  .mdebug : { *(.mdebug) }
+  /* These are needed for ELF backends which have not yet been
+     converted to the new style linker.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  /* DWARF debug sections.
+     Symbols in the .debug DWARF section are relative to the beginning of the
+     section so we begin .debug at 0.  It's not clear yet what needs to happen
+     for the others.   */
+  .debug          0 : { *(.debug) }
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  .line           0 : { *(.line) }
+  /* These must appear regardless of  .  */
+  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
+  .comment : { *(.comment) }
+  .note : { *(.note) }
+}