aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHaavard Skinnemoen <hskinnemoen@atmel.com>2007-02-12 16:28:56 +0100
committerHaavard Skinnemoen <hskinnemoen@atmel.com>2007-04-27 13:44:14 +0200
commite3e7d8d4ea37b8372ee417452d03171c5dc55125 (patch)
tree247a899f472e5cf1a3f7467dda88a017bee134a6
parent92b728c147adb8c690b520304f4c9ee3eee43c21 (diff)
downloadlinux-2.6.34-ux500-e3e7d8d4ea37b8372ee417452d03171c5dc55125.tar.gz
[AVR32] Make I/O access macros work with external devices
Fix the I/O access macros so that they work with externally connected devices accessed in little-endian mode over any bus width: * Use a set of macros to define I/O port- and memory operations borrowed from MIPS. * Allow subarchitecture to specify address- and data-mangling * Implement at32ap-specific port mangling (with build-time configurable bus width. Only one bus width at a time supported for now.) * Rewrite iowriteN and friends to use write[bwl] and friends (not the __raw counterparts.) This has been tested using pata_pcmcia to access a CompactFlash card connected to the EBI (16-bit bus width.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-rw-r--r--arch/avr32/mach-at32ap/Kconfig26
-rw-r--r--include/asm-avr32/arch-at32ap/io.h39
-rw-r--r--include/asm-avr32/io.h335
3 files changed, 247 insertions, 153 deletions
diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
index d7497715cc0..eb307838457 100644
--- a/arch/avr32/mach-at32ap/Kconfig
+++ b/arch/avr32/mach-at32ap/Kconfig
@@ -2,6 +2,30 @@ if PLATFORM_AT32AP
menu "Atmel AVR32 AP options"
+choice
+ prompt "AT32AP7000 static memory bus width"
+ depends on CPU_AT32AP7000
+ default AP7000_16_BIT_SMC
+ help
+ Define the width of the AP7000 external static memory interface.
+ This is used to determine how to mangle the address and/or data
+ when doing little-endian port access.
+
+ The current code can only support a single external memory bus
+ width for all chip selects, excluding the flash (which is using
+ raw access and is thus not affected by any of this.)
+
+config AP7000_32_BIT_SMC
+ bool "32 bit"
+
+config AP7000_16_BIT_SMC
+ bool "16 bit"
+
+config AP7000_8_BIT_SMC
+ bool "8 bit"
+
+endchoice
+
endmenu
-endif
+endif # PLATFORM_AT32AP
diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
new file mode 100644
index 00000000000..ee59e401f04
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/io.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
+#define __ASM_AVR32_ARCH_AT32AP_IO_H
+
+/* For "bizarre" halfword swapping */
+#include <linux/byteorder/swabb.h>
+
+#if defined(CONFIG_AP7000_32_BIT_SMC)
+# define __swizzle_addr_b(addr) (addr ^ 3UL)
+# define __swizzle_addr_w(addr) (addr ^ 2UL)
+# define __swizzle_addr_l(addr) (addr)
+# define ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define ioswabl(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define __mem_ioswabw(a, x) swab16(x)
+# define __mem_ioswabl(a, x) swab32(x)
+#elif defined(CONFIG_AP7000_16_BIT_SMC)
+# define __swizzle_addr_b(addr) (addr ^ 1UL)
+# define __swizzle_addr_w(addr) (addr)
+# define __swizzle_addr_l(addr) (addr)
+# define ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define ioswabl(a, x) swahw32(x)
+# define __mem_ioswabb(a, x) (x)
+# define __mem_ioswabw(a, x) swab16(x)
+# define __mem_ioswabl(a, x) swahb32(x)
+#else
+# define __swizzle_addr_b(addr) (addr)
+# define __swizzle_addr_w(addr) (addr)
+# define __swizzle_addr_l(addr) (addr)
+# define ioswabb(a, x) (x)
+# define ioswabw(a, x) swab16(x)
+# define ioswabl(a, x) swab32(x)
+# define __mem_ioswabb(a, x) (x)
+# define __mem_ioswabw(a, x) (x)
+# define __mem_ioswabl(a, x) (x)
+#endif
+
+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index c08e8104839..27b1523d42e 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -1,13 +1,15 @@
#ifndef __ASM_AVR32_IO_H
#define __ASM_AVR32_IO_H
+#include <linux/kernel.h>
#include <linux/string.h>
-
-#ifdef __KERNEL__
+#include <linux/types.h>
#include <asm/addrspace.h>
#include <asm/byteorder.h>
+#include <asm/arch/io.h>
+
/* virt_to_phys will only work when address is in P1 or P2 */
static __inline__ unsigned long virt_to_phys(volatile void *address)
{
@@ -36,204 +38,235 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-static inline void writeb(unsigned char b, volatile void __iomem *addr)
+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
{
- *(volatile unsigned char __force *)addr = b;
+ *(volatile u8 __force *)addr = v;
}
-static inline void writew(unsigned short b, volatile void __iomem *addr)
+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
{
- *(volatile unsigned short __force *)addr = b;
+ *(volatile u16 __force *)addr = v;
}
-static inline void writel(unsigned int b, volatile void __iomem *addr)
+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
{
- *(volatile unsigned int __force *)addr = b;
+ *(volatile u32 __force *)addr = v;
}
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-static inline unsigned char readb(const volatile void __iomem *addr)
+static inline u8 __raw_readb(const volatile void __iomem *addr)
{
- return *(const volatile unsigned char __force *)addr;
+ return *(const volatile u8 __force *)addr;
}
-static inline unsigned short readw(const volatile void __iomem *addr)
+static inline u16 __raw_readw(const volatile void __iomem *addr)
{
- return *(const volatile unsigned short __force *)addr;
+ return *(const volatile u16 __force *)addr;
}
-static inline unsigned int readl(const volatile void __iomem *addr)
+static inline u32 __raw_readl(const volatile void __iomem *addr)
{
- return *(const volatile unsigned int __force *)addr;
+ return *(const volatile u32 __force *)addr;
+}
+
+/* Convert I/O port address to virtual address */
+#ifndef __io
+# define __io(p) ((void *)phys_to_uncached(p))
+#endif
+
+/*
+ * Not really sure about the best way to slow down I/O on
+ * AVR32. Defining it as a no-op until we have an actual test case.
+ */
+#define SLOW_DOWN_IO do { } while (0)
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \
+static inline void \
+pfx##write##bwl(type val, volatile void __iomem *addr) \
+{ \
+ volatile type *__addr; \
+ type __val; \
+ \
+ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
+ __val = pfx##ioswab##bwl(__addr, val); \
+ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ *__addr = __val; \
+} \
+ \
+static inline type pfx##read##bwl(const volatile void __iomem *addr) \
+{ \
+ volatile type *__addr; \
+ type __val; \
+ \
+ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
+ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ __val = *__addr; \
+ return pfx##ioswab##bwl(__addr, __val); \
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \
+static inline void pfx##out##bwl##p(type val, unsigned long port) \
+{ \
+ volatile type *__addr; \
+ type __val; \
+ \
+ __addr = __io(__swizzle_addr_##bwl(port)); \
+ __val = pfx##ioswab##bwl(__addr, val); \
+ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ *__addr = __val; \
+ slow; \
+} \
+ \
+static inline type pfx##in##bwl##p(unsigned long port) \
+{ \
+ volatile type *__addr; \
+ type __val; \
+ \
+ __addr = __io(__swizzle_addr_##bwl(port)); \
+ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ __val = *__addr; \
+ slow; \
+ \
+ return pfx##ioswab##bwl(__addr, __val); \
}
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
-#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
-#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l)
+#define __BUILD_MEMORY_PFX(bus, bwl, type) \
+ __BUILD_MEMORY_SINGLE(bus, bwl, type)
+
+#define BUILDIO_MEM(bwl, type) \
+ __BUILD_MEMORY_PFX(, bwl, type) \
+ __BUILD_MEMORY_PFX(__mem_, bwl, type)
+
+#define __BUILD_IOPORT_PFX(bus, bwl, type) \
+ __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \
+ __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwl, type) \
+ __BUILD_IOPORT_PFX(, bwl, type) \
+ __BUILD_IOPORT_PFX(__mem_, bwl, type)
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+#define __BUILD_MEMORY_STRING(bwl, type) \
+static inline void writes##bwl(volatile void __iomem *addr, \
+ const void *data, unsigned int count) \
+{ \
+ const type *__data = data; \
+ \
+ while (count--) \
+ __mem_write##bwl(*__data++, addr); \
+} \
+ \
+static inline void reads##bwl(const volatile void __iomem *addr, \
+ void *data, unsigned int count) \
+{ \
+ type *__data = data; \
+ \
+ while (count--) \
+ *__data++ = __mem_read##bwl(addr); \
+}
+
+#define __BUILD_IOPORT_STRING(bwl, type) \
+static inline void outs##bwl(unsigned long port, const void *data, \
+ unsigned int count) \
+{ \
+ const type *__data = data; \
+ \
+ while (count--) \
+ __mem_out##bwl(*__data++, port); \
+} \
+ \
+static inline void ins##bwl(unsigned long port, void *data, \
+ unsigned int count) \
+{ \
+ type *__data = data; \
+ \
+ while (count--) \
+ *__data++ = __mem_in##bwl(port); \
+}
-#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l)
-#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l)
-#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l)
+#define BUILDSTRING(bwl, type) \
+ __BUILD_MEMORY_STRING(bwl, type) \
+ __BUILD_IOPORT_STRING(bwl, type)
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
/*
* io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
*/
#ifndef ioread8
-#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; })
+#define ioread8(p) ((unsigned int)readb(p))
-#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
-#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; })
+#define ioread16(p) ((unsigned int)readw(p))
+#define ioread16be(p) ((unsigned int)__raw_readw(p))
-#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
-#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; })
+#define ioread32(p) ((unsigned int)readl(p))
+#define ioread32be(p) ((unsigned int)__raw_readl(p))
-#define iowrite8(v,p) __raw_writeb(v, p)
+#define iowrite8(v,p) writeb(v, p)
-#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p)
-#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p)
+#define iowrite16(v,p) writew(v, p)
+#define iowrite16be(v,p) __raw_writew(v, p)
-#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p)
-#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p)
+#define iowrite32(v,p) writel(v, p)
+#define iowrite32be(v,p) __raw_writel(v, p)
-#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
-#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
-#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
+#define ioread8_rep(p,d,c) readsb(p,d,c)
+#define ioread16_rep(p,d,c) readsw(p,d,c)
+#define ioread32_rep(p,d,c) readsl(p,d,c)
-#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c)
-#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c)
-#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c)
+#define iowrite8_rep(p,s,c) writesb(p,s,c)
+#define iowrite16_rep(p,s,c) writesw(p,s,c)
+#define iowrite32_rep(p,s,c) writesl(p,s,c)
#endif
-
-/*
- * These two are only here because ALSA _thinks_ it needs them...
- */
static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
unsigned long count)
{
char *p = to;
- while (count) {
- count--;
- *p = readb(from);
- p++;
- from++;
- }
+ volatile const char __iomem *addr = from;
+
+ while (count--)
+ *p++ = readb(addr++);
}
static inline void memcpy_toio(volatile void __iomem *to, const void * from,
unsigned long count)
{
const char *p = from;
- while (count) {
- count--;
- writeb(*p, to);
- p++;
- to++;
- }
+ volatile char __iomem *addr = to;
+
+ while (count--)
+ writeb(*p++, addr++);
}
static inline void memset_io(volatile void __iomem *addr, unsigned char val,
unsigned long count)
{
- memset((void __force *)addr, val, count);
-}
-
-/*
- * Bad read/write accesses...
- */
-extern void __readwrite_bug(const char *fn);
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* Convert I/O port address to virtual address */
-#define __io(p) ((void __iomem *)phys_to_uncached(p))
-
-/*
- * IO port access primitives
- * -------------------------
- *
- * The AVR32 doesn't have special IO access instructions; all IO is memory
- * mapped. Note that these are defined to perform little endian accesses
- * only. Their primary purpose is to access PCI and ISA peripherals.
- *
- * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place.
- *
- * The machine specific io.h include defines __io to translate an "IO"
- * address to a memory address.
- *
- * Note that we prevent GCC re-ordering or caching values in expressions
- * by introducing sequence points into the in*() definitions. Note that
- * __raw_* do not guarantee this behaviour.
- *
- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
- */
-#define outb(v, p) __raw_writeb(v, __io(p))
-#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
-#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
-
-#define inb(p) __raw_readb(__io(p))
-#define inw(p) le16_to_cpu(__raw_readw(__io(p)))
-#define inl(p) le32_to_cpu(__raw_readl(__io(p)))
-
-static inline void __outsb(unsigned long port, void *addr, unsigned int count)
-{
- while (count--) {
- outb(*(u8 *)addr, port);
- addr++;
- }
-}
+ volatile char __iomem *p = addr;
-static inline void __insb(unsigned long port, void *addr, unsigned int count)
-{
- while (count--) {
- *(u8 *)addr = inb(port);
- addr++;
- }
+ while (count--)
+ writeb(val, p++);
}
-static inline void __outsw(unsigned long port, void *addr, unsigned int count)
-{
- while (count--) {
- outw(*(u16 *)addr, port);
- addr += 2;
- }
-}
-
-static inline void __insw(unsigned long port, void *addr, unsigned int count)
-{
- while (count--) {
- *(u16 *)addr = inw(port);
- addr += 2;
- }
-}
-
-static inline void __outsl(unsigned long port, void *addr, unsigned int count)
-{
- while (count--) {
- outl(*(u32 *)addr, port);
- addr += 4;
- }
-}
-
-static inline void __insl(unsigned long port, void *addr, unsigned int count)
-{
- while (count--) {
- *(u32 *)addr = inl(port);
- addr += 4;
- }
-}
-
-#define outsb(port, addr, count) __outsb(port, addr, count)
-#define insb(port, addr, count) __insb(port, addr, count)
-#define outsw(port, addr, count) __outsw(port, addr, count)
-#define insw(port, addr, count) __insw(port, addr, count)
-#define outsl(port, addr, count) __outsl(port, addr, count)
-#define insl(port, addr, count) __insl(port, addr, count)
+#define IO_SPACE_LIMIT 0xffffffff
extern void __iomem *__ioremap(unsigned long offset, size_t size,
unsigned long flags);
@@ -292,6 +325,4 @@ extern void __iounmap(void __iomem *addr);
*/
#define xlate_dev_kmem_ptr(p) p
-#endif /* __KERNEL__ */
-
#endif /* __ASM_AVR32_IO_H */