aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-01-27 16:08:04 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-01-27 16:08:04 -0800
commite4a7ca29039e615ce13a61b9c6abfb2aa394e9a1 (patch)
treefc7f36ccb9ec01e95636c01b09589e88da5c520f
parent843c04a0f63c74c6424e4b7d1ab85223b1ecf740 (diff)
parent236dd4d18f293e3c9798f35c08272196826a980d (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (36 commits) USB: Driver for Freescale QUICC Engine USB Host Controller USB: option: add QUANTA HSDPA Data Card device ids USB: storage: Add another unusual_dev for off-by-one bug USB: unusual_dev: usb-storage needs to ignore a device USB: GADGET: fix !x & y USB: new id for ti_usb_3410_5052 driver USB: cdc-acm: Add another conexant modem to the quirks USB: 'option' driver - onda device MT503HS has wrong id USB: Remove ZTE modem from unusual_devices USB: storage: support of Dane-Elec MediaTouch USB device USB: usbmon: Implement compat_ioctl USB: add kernel-doc for wusb_dev in struct usb_device USB: ftdi_sio driver support of bar code scanner from Diebold USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID USB: cp2101 device USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440 USB: remove vernier labpro from ldusb USB: CDC-ACM quirk for MTK GPS USB: cdc-acm: support some gps data loggers USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index ...
-rw-r--r--arch/arm/mach-davinci/usb.c23
-rw-r--r--drivers/usb/Makefile1
-rw-r--r--drivers/usb/class/cdc-acm.c9
-rw-r--r--drivers/usb/class/usblp.c1
-rw-r--r--drivers/usb/core/devio.c20
-rw-r--r--drivers/usb/core/driver.c2
-rw-r--r--drivers/usb/core/hcd-pci.c117
-rw-r--r--drivers/usb/core/hcd.h1
-rw-r--r--drivers/usb/core/hub.c4
-rw-r--r--drivers/usb/core/inode.c1
-rw-r--r--drivers/usb/core/message.c40
-rw-r--r--drivers/usb/core/usb.h6
-rw-r--r--drivers/usb/gadget/composite.c9
-rw-r--r--drivers/usb/gadget/imx_udc.c2
-rw-r--r--drivers/usb/host/Kconfig18
-rw-r--r--drivers/usb/host/Makefile6
-rw-r--r--drivers/usb/host/ehci-pci.c3
-rw-r--r--drivers/usb/host/fhci-dbg.c139
-rw-r--r--drivers/usb/host/fhci-hcd.c836
-rw-r--r--drivers/usb/host/fhci-hub.c345
-rw-r--r--drivers/usb/host/fhci-mem.c113
-rw-r--r--drivers/usb/host/fhci-q.c284
-rw-r--r--drivers/usb/host/fhci-sched.c888
-rw-r--r--drivers/usb/host/fhci-tds.c626
-rw-r--r--drivers/usb/host/fhci.h607
-rw-r--r--drivers/usb/host/ohci-hcd.c8
-rw-r--r--drivers/usb/host/ohci-pci.c1
-rw-r--r--drivers/usb/host/uhci-hcd.c1
-rw-r--r--drivers/usb/misc/ldusb.c2
-rw-r--r--drivers/usb/mon/mon_bin.c105
-rw-r--r--drivers/usb/musb/Kconfig3
-rw-r--r--drivers/usb/musb/cppi_dma.c10
-rw-r--r--drivers/usb/musb/davinci.c13
-rw-r--r--drivers/usb/musb/musb_core.c5
-rw-r--r--drivers/usb/musb/musb_gadget.c6
-rw-r--r--drivers/usb/musb/musb_host.c4
-rw-r--r--drivers/usb/musb/tusb6010_omap.c4
-rw-r--r--drivers/usb/otg/Kconfig4
-rw-r--r--drivers/usb/serial/cp2101.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.h9
-rw-r--r--drivers/usb/serial/option.c14
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c3
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.h2
-rw-r--r--drivers/usb/storage/unusual_devs.h36
-rw-r--r--include/linux/usb.h2
46 files changed, 4105 insertions, 232 deletions
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index c6fb32c36c5..867ead2559a 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -77,29 +77,6 @@ static struct platform_device usb_dev = {
.num_resources = ARRAY_SIZE(usb_resources),
};
-#ifdef CONFIG_USB_MUSB_OTG
-
-static struct otg_transceiver *xceiv;
-
-struct otg_transceiver *otg_get_transceiver(void)
-{
- if (xceiv)
- get_device(xceiv->dev);
- return xceiv;
-}
-EXPORT_SYMBOL(otg_get_transceiver);
-
-int otg_set_transceiver(struct otg_transceiver *x)
-{
- if (xceiv && x)
- return -EBUSY;
- xceiv = x;
- return 0;
-}
-EXPORT_SYMBOL(otg_set_transceiver);
-
-#endif
-
void __init setup_usb(unsigned mA, unsigned potpgt_msec)
{
usb_data.power = mA / 2;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7c419b876..8bcde8cde55 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
+obj-$(CONFIG_USB_FHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 00b47ea24f8..97ba4a985ed 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1349,6 +1349,12 @@ static struct usb_device_id acm_ids[] = {
{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
@@ -1370,6 +1376,9 @@ static struct usb_device_id acm_ids[] = {
{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index b5775af3ba2..3f3ee135193 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = {
{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+ { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
{ 0, 0 }
};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 26fece124e0..7513bb083c1 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = {
.release = usbdev_release,
};
-void usb_fs_classdev_common_remove(struct usb_device *udev)
+static void usbdev_remove(struct usb_device *udev)
{
struct dev_state *ps;
struct siginfo sinfo;
@@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev)
{
if (dev->usb_classdev)
device_unregister(dev->usb_classdev);
- usb_fs_classdev_common_remove(dev);
}
-static int usb_classdev_notify(struct notifier_block *self,
+#else
+#define usb_classdev_add(dev) 0
+#define usb_classdev_remove(dev) do {} while (0)
+
+#endif
+
+static int usbdev_notify(struct notifier_block *self,
unsigned long action, void *dev)
{
switch (action) {
@@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self,
break;
case USB_DEVICE_REMOVE:
usb_classdev_remove(dev);
+ usbdev_remove(dev);
break;
}
return NOTIFY_OK;
}
static struct notifier_block usbdev_nb = {
- .notifier_call = usb_classdev_notify,
+ .notifier_call = usbdev_notify,
};
-#endif
static struct cdev usb_device_cdev;
@@ -1798,9 +1803,8 @@ int __init usb_devio_init(void)
* to /sys/dev
*/
usb_classdev_class->dev_kobj = NULL;
-
- usb_register_notify(&usbdev_nb);
#endif
+ usb_register_notify(&usbdev_nb);
out:
return retval;
@@ -1811,8 +1815,8 @@ error_cdev:
void usb_devio_cleanup(void)
{
-#ifdef CONFIG_USB_DEVICE_CLASS
usb_unregister_notify(&usbdev_nb);
+#ifdef CONFIG_USB_DEVICE_CLASS
class_destroy(usb_classdev_class);
#endif
cdev_del(&usb_device_cdev);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 98760553bc9..d0a21a5f820 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev)
* supports "soft" unbinding.
*/
if (!driver->soft_unbind)
- usb_disable_interface(udev, intf);
+ usb_disable_interface(udev, intf, false);
driver->disconnect(intf);
usb_cancel_queued_reset(intf);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 507741ed448..c54fc40458b 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
pci_set_master(dev);
- device_set_wakeup_enable(&dev->dev, 1);
retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
@@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
int wake, w;
+ int has_pci_pm;
/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
@@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
synchronize_irq(dev->irq);
+ /* Downstream ports from this root hub should already be quiesced, so
+ * there will be no DMA activity. Now we can shut down the upstream
+ * link (except maybe for PME# resume signaling) and enter some PCI
+ * low power state, if the hardware allows.
+ */
+ pci_disable_device(dev);
+
+ pci_save_state(dev);
+
/* Don't fail on error to enable wakeup. We rely on pci code
* to reject requests the hardware can't implement, rather
* than coding the same thing.
@@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
wake = w;
dev_dbg(&dev->dev, "wakeup: %d\n", wake);
- /* Downstream ports from this root hub should already be quiesced, so
- * there will be no DMA activity. Now we can shut down the upstream
- * link (except maybe for PME# resume signaling) and enter some PCI
- * low power state, if the hardware allows.
- */
- pci_disable_device(dev);
- done:
- return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
- int retval = 0;
- int has_pci_pm;
-
- /* We might already be suspended (runtime PM -- not yet written) */
- if (dev->current_state != PCI_D0)
- goto done;
-
- pci_save_state(dev);
-
/* Don't change state if we don't need to */
if (message.event == PM_EVENT_FREEZE ||
message.event == PM_EVENT_PRETHAW) {
@@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
done:
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
/**
* usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
*/
int usb_hcd_pci_resume_early(struct pci_dev *dev)
{
- int retval = 0;
- pci_power_t state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
-
- /* NOTE: chip docs cover clean "real suspend" cases (what Linux
- * calls "standby", "suspend to RAM", and so on). There are also
- * dirty cases when swsusp fakes a suspend in "shutdown" mode.
- */
- if (state != PCI_D0) {
-#ifdef DEBUG
- int pci_pm;
- u16 pmcr;
-
- pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
- pmcr &= PCI_PM_CTRL_STATE_MASK;
- if (pmcr) {
- /* Clean case: power to USB and to HC registers was
- * maintained; remote wakeup is easy.
- */
- dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
- } else {
- /* Clean: HC lost Vcc power, D0 uninitialized
- * + Vaux may have preserved port and transceiver
- * state ... for remote wakeup from D3cold
- * + or not; HCD must reinit + re-enumerate
- *
- * Dirty: D0 semi-initialized cases with swsusp
- * + after BIOS init
- * + after Linux init (HCD statically linked)
- */
- dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
- state);
- }
-#endif
-
- retval = pci_set_power_state(dev, PCI_D0);
- } else {
- /* Same basic cases: clean (powered/not), dirty */
- dev_dbg(&dev->dev, "PCI legacy resume\n");
- }
-
- if (retval < 0)
- dev_err(&dev->dev, "can't resume: %d\n", retval);
- else
- pci_restore_state(dev);
-
- return retval;
+ pci_restore_state(dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
@@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
struct usb_hcd *hcd;
int retval;
+#ifdef CONFIG_PPC_PMAC
+ /* Reenable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, 1);
+ }
+#endif
+
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
@@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
return 0;
}
+ pci_enable_wake(dev, PCI_D0, false);
+
retval = pci_enable_device(dev);
if (retval < 0) {
dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 572d2cf46e8..5b94a56bec2 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94d5ee263c2..cd50d86029e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1)
void usb_ep0_reinit(struct usb_device *udev)
{
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+ usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
usb_enable_endpoint(udev, &udev->ep0, true);
}
EXPORT_SYMBOL_GPL(usb_ep0_reinit);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 2a129cb7bb5..dff5760a37f 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev)
fs_remove_file (dev->usbfs_dentry);
dev->usbfs_dentry = NULL;
}
- usb_fs_classdev_common_remove(dev);
}
static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index de51667dd64..31fb204f44c 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf)
* @dev: the device whose endpoint is being disabled
* @epaddr: the endpoint's address. Endpoint number for output,
* endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ * controller hardware
*
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
*/
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+ bool reset_hardware)
{
unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
struct usb_host_endpoint *ep;
@@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
if (usb_endpoint_out(epaddr)) {
ep = dev->ep_out[epnum];
- dev->ep_out[epnum] = NULL;
+ if (reset_hardware)
+ dev->ep_out[epnum] = NULL;
} else {
ep = dev->ep_in[epnum];
- dev->ep_in[epnum] = NULL;
+ if (reset_hardware)
+ dev->ep_in[epnum] = NULL;
}
if (ep) {
ep->enabled = 0;
usb_hcd_flush_endpoint(dev, ep);
- usb_hcd_disable_endpoint(dev, ep);
+ if (reset_hardware)
+ usb_hcd_disable_endpoint(dev, ep);
}
}
@@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
* @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ * controller hardware
*
* Disables all the endpoints for the interface's current altsetting.
*/
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+ bool reset_hardware)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
usb_disable_endpoint(dev,
- alt->endpoint[i].desc.bEndpointAddress);
+ alt->endpoint[i].desc.bEndpointAddress,
+ reset_hardware);
}
}
@@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
skip_ep0 ? "non-ep0" : "all");
for (i = skip_ep0; i < 16; ++i) {
- usb_disable_endpoint(dev, i);
- usb_disable_endpoint(dev, i + USB_DIR_IN);
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
dev->toggle[0] = dev->toggle[1] = 0;
@@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
remove_intf_ep_devs(iface);
usb_remove_sysfs_intf_files(iface);
}
- usb_disable_interface(dev, iface);
+ usb_disable_interface(dev, iface, true);
iface->cur_altsetting = alt;
@@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev)
*/
for (i = 1; i < 16; ++i) {
- usb_disable_endpoint(dev, i);
- usb_disable_endpoint(dev, i + USB_DIR_IN);
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
config = dev->actconfig;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 386177867a8..79d8a9ea559 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev,
struct usb_host_endpoint *ep, bool reset_toggle);
extern void usb_enable_interface(struct usb_device *dev,
struct usb_interface *intf, bool reset_toggles);
-extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+ bool reset_hardware);
extern void usb_disable_interface(struct usb_device *dev,
- struct usb_interface *intf);
+ struct usb_interface *intf, bool reset_hardware);
extern void usb_release_interface_cache(struct kref *ref);
extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
extern int usb_deauthorize_device(struct usb_device *);
@@ -151,7 +152,6 @@ extern struct usb_driver usbfs_driver;
extern const struct file_operations usbfs_devices_fops;
extern const struct file_operations usbdev_file_operations;
extern void usbfs_conn_disc_event(void);
-extern void usb_fs_classdev_common_remove(struct usb_device *udev);
extern int usb_devio_init(void);
extern void usb_devio_cleanup(void);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f2da0269e1b..5d11c291f1a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
struct usb_request *req = cdev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u8 intf = w_index & 0xFF;
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
struct usb_function *f = NULL;
@@ -769,10 +770,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
goto unknown;
if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
break;
- f = cdev->config->interface[w_index];
+ f = cdev->config->interface[intf];
if (!f)
break;
- if (w_value && !f->get_alt)
+ if (w_value && !f->set_alt)
break;
value = f->set_alt(f, w_index, w_value);
break;
@@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
goto unknown;
if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
break;
- f = cdev->config->interface[w_index];
+ f = cdev->config->interface[intf];
if (!f)
break;
/* lots of interfaces only need altsetting zero... */
@@ -808,7 +809,7 @@ unknown:
*/
if ((ctrl->bRequestType & USB_RECIP_MASK)
== USB_RECIP_INTERFACE) {
- f = cdev->config->interface[w_index];
+ f = cdev->config->interface[intf];
if (f && f->setup)
value = f->setup(f, ctrl);
else
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index cde8fdf15d5..77c5d0a8a06 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
for (i = 0; i < 100; i ++) {
temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
- if (!temp & EPSTAT_STALL)
+ if (!(temp & EPSTAT_STALL))
break;
udelay(20);
}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2b476b6b3d4..2c63bfb1f8d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -140,6 +140,7 @@ config USB_OHCI_HCD
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ select USB_OTG_UTILS if ARCH_OMAP
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
@@ -238,6 +239,23 @@ config USB_UHCI_HCD
To compile this driver as a module, choose M here: the
module will be called uhci-hcd.
+config USB_FHCI_HCD
+ tristate "Freescale QE USB Host Controller support"
+ depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+ select FSL_GTM
+ select QE_USB
+ help
+ This driver enables support for Freescale QE USB Host Controller
+ (as found on MPC8360 and MPC8323 processors), the driver supports
+ Full and Low Speed USB.
+
+config FHCI_DEBUG
+ bool "Freescale QE USB Host Controller debug support"
+ depends on USB_FHCI_HCD && DEBUG_FS
+ help
+ Say "y" to see some FHCI debug information and statistics
+ throught debugfs.
+
config USB_U132_HCD
tristate "Elan U132 Adapter Host Controller"
depends on USB && USB_FTDI_ELAN
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e5f3f20787e..f163571e33d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y)
endif
isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+ fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
obj-$(CONFIG_USB_WHCI_HCD) += whci/
@@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bdc6e86e1f8..bb21fb0a496 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
pci_read_config_word(pdev, 0x62, &port_wake);
if (port_wake & 0x0001) {
dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
- device_init_wakeup(&pdev->dev, 1);
+ device_set_wakeup_capable(&pdev->dev, 1);
}
}
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
new file mode 100644
index 00000000000..34e14edf390
--- /dev/null
+++ b/drivers/usb/host/fhci-dbg.c
@@ -0,0 +1,139 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+ int i;
+
+ if (usb_er == -1) {
+ fhci->usb_irq_stat[12]++;
+ return;
+ }
+
+ for (i = 0; i < 12; ++i) {
+ if (usb_er & (1 << i))
+ fhci->usb_irq_stat[i]++;
+ }
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+ struct fhci_hcd *fhci = s->private;
+ struct fhci_regs __iomem *regs = fhci->regs;
+
+ seq_printf(s,
+ "mode: 0x%x\n" "addr: 0x%x\n"
+ "command: 0x%x\n" "ep0: 0x%x\n"
+ "event: 0x%x\n" "mask: 0x%x\n"
+ "status: 0x%x\n" "SOF timer: %d\n"
+ "frame number: %d\n"
+ "lines status: 0x%x\n",
+ in_8(&regs->usb_mod), in_8(&regs->usb_addr),
+ in_8(&regs->usb_comm), in_be16(&regs->usb_ep[0]),
+ in_be16(&regs->usb_event), in_be16(&regs->usb_mask),
+ in_8(&regs->usb_status), in_be16(&regs->usb_sof_tmr),
+ in_be16(&regs->usb_frame_num),
+ fhci_ioports_check_bus_state(fhci));
+
+ return 0;
+}
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+ struct fhci_hcd *fhci = s->private;
+ int *usb_irq_stat = fhci->usb_irq_stat;
+
+ seq_printf(s,
+ "RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+ "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+ "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+ "RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+ "IDLE_ONLY: %d\n",
+ usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+ usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+ usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+ usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+ usb_irq_stat[12]);
+
+ return 0;
+}
+
+static int fhci_dfs_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fhci_dfs_regs_show, inode->i_private);
+}
+
+static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fhci_dfs_irq_stat_show, inode->i_private);
+}
+
+static const struct file_operations fhci_dfs_regs_fops = {
+ .open = fhci_dfs_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations fhci_dfs_irq_stat_fops = {
+ .open = fhci_dfs_irq_stat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+ struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+ fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+ if (!fhci->dfs_root) {
+ WARN_ON(1);
+ return;
+ }
+
+ fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO,
+ fhci->dfs_root, fhci, &fhci_dfs_regs_fops);
+
+ fhci->dfs_irq_stat = debugfs_create_file("irq_stat",
+ S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+ &fhci_dfs_irq_stat_fops);
+
+ WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+ if (!fhci->dfs_root)
+ return;
+
+ if (fhci->dfs_irq_stat)
+ debugfs_remove(fhci->dfs_irq_stat);
+
+ if (fhci->dfs_regs)
+ debugfs_remove(fhci->dfs_regs);
+
+ debugfs_remove(fhci->dfs_root);
+}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
new file mode 100644
index 00000000000..ba622cc8a9b
--- /dev/null
+++ b/drivers/usb/host/fhci-hcd.c
@@ -0,0 +1,836 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ /* clear frame_n */
+ out_be16(&fhci->pram->frame_num, 0);
+
+ out_be16(&fhci->regs->usb_sof_tmr, 0);
+ setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+ gtm_stop_timer16(fhci->timer);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+ return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+ enum fhci_mem_alloc data_mem,
+ u32 ring_len)
+{
+ u32 rc;
+
+ rc = fhci_create_ep(usb, data_mem, ring_len);
+ if (rc)
+ return rc;
+
+ /* inilialize endpoint registers */
+ fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+ return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (usb->intr_nesting_cnt == 1) {
+ /* initialize the USB interrupt */
+ enable_irq(fhci_to_hcd(fhci)->irq);
+
+ /* initialize the event register and mask register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+ /* enable the timer interrupts */
+ enable_irq(fhci->timer->irq);
+ } else if (usb->intr_nesting_cnt > 1)
+ fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+ usb->intr_nesting_cnt--;
+}
+
+/* diable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (usb->intr_nesting_cnt == 0) {
+ /* diable the timer interrupt */
+ disable_irq_nosync(fhci->timer->irq);
+
+ /* disable the usb interrupt */
+ disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+ out_be16(&usb->fhci->regs->usb_mask, 0);
+ }
+ usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+ setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+ mdelay(100);
+
+ return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ fhci_usb_disable_interrupt(usb);
+ fhci_port_disable(fhci);
+
+ /* disable the usb controller */
+ if (usb->port_status == FHCI_PORT_FULL ||
+ usb->port_status == FHCI_PORT_LOW)
+ fhci_device_disconnected_interrupt(fhci);
+
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+ return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+ u8 bits = 0;
+
+ /* check USBOE,if transmitting,exit */
+ if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+ return -1;
+
+ /* check USBRP */
+ if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+ bits |= 0x2;
+
+ /* check USBRN */
+ if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+ bits |= 0x1;
+
+ return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+ struct ed *ed;
+ struct ed *next_ed;
+ struct td *td;
+ struct td *next_td;
+
+ list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+ list_del(&ed->node);
+ kfree(ed);
+ }
+
+ list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+ list_del(&td->node);
+ kfree(td);
+ }
+
+ kfree(fhci->vroot_hub);
+ fhci->vroot_hub = NULL;
+
+ kfree(fhci->hc_list);
+ fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+ int i;
+
+ fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+ if (!fhci->hc_list)
+ goto err;
+
+ INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+ INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+ INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+ INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+ INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+ fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+ if (!fhci->vroot_hub)
+ goto err;
+
+ INIT_LIST_HEAD(&fhci->empty_eds);
+ INIT_LIST_HEAD(&fhci->empty_tds);
+
+ /* initialize work queue to handle done list */
+ fhci_tasklet.data = (unsigned long)fhci;
+ fhci->process_done_task = &fhci_tasklet;
+
+ for (i = 0; i < MAX_TDS; i++) {
+ struct td *td;
+
+ td = kmalloc(sizeof(*td), GFP_KERNEL);
+ if (!td)
+ goto err;
+ fhci_recycle_empty_td(fhci, td);
+ }
+ for (i = 0; i < MAX_EDS; i++) {
+ struct ed *ed;
+
+ ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+ if (!ed)
+ goto err;
+ fhci_recycle_empty_ed(fhci, ed);
+ }
+
+ fhci->active_urbs = 0;
+ return 0;
+err:
+ fhci_mem_free(fhci);
+ return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+ struct fhci_usb *usb = lld;
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (usb) {
+ fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+ fhci_ep0_free(usb);
+ kfree(usb->actual_frame);
+ kfree(usb);
+ }
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+ usb->port_status = FHCI_PORT_DISABLED;
+ usb->max_frame_usage = FRAME_TIME_USAGE;
+ usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+ usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+ if (!usb->actual_frame) {
+ fhci_usb_free(usb);
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+ /* initializing registers on chip, clear frame number */
+ out_be16(&fhci->pram->frame_num, 0);
+
+ /* clear rx state */
+ out_be32(&fhci->pram->rx_state, 0);
+
+ /* set mask register */
+ usb->saved_msk = (USB_E_TXB_MASK |
+ USB_E_TXE1_MASK |
+ USB_E_IDLE_MASK |
+ USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+ out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN);
+
+ /* clearing the mask register */
+ out_be16(&usb->fhci->regs->usb_mask, 0);
+
+ /* initialing the event register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+
+ if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+ fhci_usb_free(usb);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb;
+
+ /* allocate memory for SCC data structure */
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb) {
+ fhci_err(fhci, "no memory for SCC data struct\n");
+ return NULL;
+ }
+
+ usb->fhci = fhci;
+ usb->hc_list = fhci->hc_list;
+ usb->vroot_hub = fhci->vroot_hub;
+
+ usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+ return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+ int ret;
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+ ret = fhci_mem_init(fhci);
+ if (ret) {
+ fhci_err(fhci, "failed to allocate memory\n");
+ goto err;
+ }
+
+ fhci->usb_lld = fhci_create_lld(fhci);
+ if (!fhci->usb_lld) {
+ fhci_err(fhci, "low level driver config failed\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = fhci_usb_init(fhci);
+ if (ret) {
+ fhci_err(fhci, "low level driver initialize failed\n");
+ goto err;
+ }
+
+ spin_lock_init(&fhci->lock);
+
+ /* connect the virtual root hub */
+ fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */
+ fhci->vroot_hub->hub.wHubStatus = 0;
+ fhci->vroot_hub->hub.wHubChange = 0;
+ fhci->vroot_hub->port.wPortStatus = 0;
+ fhci->vroot_hub->port.wPortChange = 0;
+
+ hcd->state = HC_STATE_RUNNING;
+
+ /*
+ * From here on, khubd concurrently accesses the root
+ * hub; drivers will be talking to enumerated devices.
+ * (On restart paths, khubd already knows about the root
+ * hub and could find work as soon as we wrote FLAG_CF.)
+ *
+ * Before this point the HC was idle/ready. After, khubd
+ * and device drivers may start it running.
+ */
+ fhci_usb_enable(fhci);
+ return 0;
+err:
+ fhci_mem_free(fhci);
+ return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+ fhci_usb_disable_interrupt(fhci->usb_lld);
+ fhci_usb_disable(fhci);
+
+ fhci_usb_free(fhci->usb_lld);
+ fhci->usb_lld = NULL;
+ fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ u32 pipe = urb->pipe;
+ int ret;
+ int i;
+ int size = 0;
+ struct urb_priv *urb_priv;
+ unsigned long flags;
+
+ switch (usb_pipetype(pipe)) {
+ case PIPE_CONTROL:
+ /* 1 td fro setup,1 for ack */
+ size = 2;
+ case PIPE_BULK:
+ /* one td for every 4096 bytes(can be upto 8k) */
+ size += urb->transfer_buffer_length / 4096;
+ /* ...add for any remaining bytes... */
+ if ((urb->transfer_buffer_length % 4096) != 0)
+ size++;
+ /* ..and maybe a zero length packet to wrap it up */
+ if (size == 0)
+ size++;
+ else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+ && (urb->transfer_buffer_length
+ % usb_maxpacket(urb->dev, pipe,
+ usb_pipeout(pipe))) != 0)
+ size++;
+ break;
+ case PIPE_ISOCHRONOUS:
+ size = urb->number_of_packets;
+ if (size <= 0)
+ return -EINVAL;
+ for (i = 0; i < urb->number_of_packets; i++) {
+ urb->iso_frame_desc[i].actual_length = 0;
+ urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+ }
+ break;
+ case PIPE_INTERRUPT:
+ size = 1;
+ }
+
+ /* allocate the private part of the URB */
+ urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+
+ /* allocate the private part of the URB */
+ urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+ if (!urb_priv->tds) {
+ kfree(urb_priv);
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto err;
+
+ /* fill the private part of the URB */
+ urb_priv->num_of_tds = size;
+
+ urb->status = -EINPROGRESS;
+ urb->actual_length = 0;
+ urb->error_count = 0;
+ urb->hcpriv = urb_priv;
+
+ fhci_queue_urb(fhci, urb);
+err:
+ if (ret) {
+ kfree(urb_priv->tds);
+ kfree(urb_priv);
+ }
+ spin_unlock_irqrestore(&fhci->lock, flags);
+ return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ struct fhci_usb *usb = fhci->usb_lld;
+ int ret = -EINVAL;
+ unsigned long flags;
+
+ if (!urb || !urb->dev || !urb->dev->bus)
+ goto out;
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret)
+ goto out2;
+
+ if (usb->port_status != FHCI_PORT_DISABLED) {
+ struct urb_priv *urb_priv;
+
+ /*
+ * flag the urb's data for deletion in some upcoming
+ * SF interrupt's delete list processing
+ */
+ urb_priv = urb->hcpriv;
+
+ if (!urb_priv || (urb_priv->state == URB_DEL))
+ goto out2;
+
+ urb_priv->state = URB_DEL;
+
+ /* already pending? */
+ urb_priv->ed->state = FHCI_ED_URB_DEL;
+ } else {
+ fhci_urb_complete_free(fhci, urb);
+ }
+
+out2:
+ spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+ return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct fhci_hcd *fhci;
+ struct ed *ed;
+ unsigned long flags;
+
+ fhci = hcd_to_fhci(hcd);
+ spin_lock_irqsave(&fhci->lock, flags);
+ ed = ep->hcpriv;
+ if (ed) {
+ while (ed->td_head != NULL) {
+ struct td *td = fhci_remove_td_from_ed(ed);
+ fhci_urb_complete_free(fhci, td->urb);
+ }
+ fhci_recycle_empty_ed(fhci, ed);
+ ep->hcpriv = NULL;
+ }
+ spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+ return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+ .description = "fsl,usb-fhci",
+ .product_desc = "FHCI HOST Controller",
+ .hcd_priv_size = sizeof(struct fhci_hcd),
+
+ /* generic hardware linkage */
+ .irq = fhci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /* basic lifecycle operation */
+ .start = fhci_start,
+ .stop = fhci_stop,
+
+ /* managing i/o requests and associated device resources */
+ .urb_enqueue = fhci_urb_enqueue,
+ .urb_dequeue = fhci_urb_dequeue,
+ .endpoint_disable = fhci_endpoint_disable,
+
+ /* scheduling support */
+ .get_frame_number = fhci_get_frame_number,
+
+ /* root hub support */
+ .hub_status_data = fhci_hub_status_data,
+ .hub_control = fhci_hub_control,
+};
+
+static int __devinit of_fhci_probe(struct of_device *ofdev,
+ const struct of_device_id *ofid)
+{
+ struct device *dev = &ofdev->dev;
+ struct device_node *node = ofdev->node;
+ struct usb_hcd *hcd;
+ struct fhci_hcd *fhci;
+ struct resource usb_regs;
+ unsigned long pram_addr;
+ unsigned int usb_irq;
+ const char *sprop;
+ const u32 *iprop;
+ int size;
+ int ret;
+ int i;
+ int j;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ sprop = of_get_property(node, "mode", NULL);
+ if (sprop && strcmp(sprop, "host"))
+ return -ENODEV;
+
+ hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+ if (!hcd) {
+ dev_err(dev, "could not create hcd\n");
+ return -ENOMEM;
+ }
+
+ fhci = hcd_to_fhci(hcd);
+ hcd->self.controller = dev;
+ dev_set_drvdata(dev, hcd);
+
+ iprop = of_get_property(node, "hub-power-budget", &size);
+ if (iprop && size == sizeof(*iprop))
+ hcd->power_budget = *iprop;
+
+ /* FHCI registers. */
+ ret = of_address_to_resource(node, 0, &usb_regs);
+ if (ret) {
+ dev_err(dev, "could not get regs\n");
+ goto err_regs;
+ }
+
+ hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1);
+ if (!hcd->regs) {
+ dev_err(dev, "could not ioremap regs\n");
+ ret = -ENOMEM;
+ goto err_regs;
+ }
+ fhci->regs = hcd->regs;
+
+ /* Parameter RAM. */
+ iprop = of_get_property(node, "reg", &size);
+ if (!iprop || size < sizeof(*iprop) * 4) {
+ dev_err(dev, "can't get pram offset\n");
+ ret = -EINVAL;
+ goto err_pram;
+ }
+
+ pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+ if (IS_ERR_VALUE(pram_addr)) {
+ dev_err(dev, "failed to allocate usb pram\n");
+ ret = -ENOMEM;
+ goto err_pram;
+ }
+ fhci->pram = cpm_muram_addr(pram_addr);
+
+ /* GPIOs and pins */
+ for (i = 0; i < NUM_GPIOS; i++) {
+ int gpio;
+ enum of_gpio_flags flags;
+
+ gpio = of_get_gpio_flags(node, i, &flags);
+ fhci->gpios[i] = gpio;
+ fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+ if (!gpio_is_valid(gpio)) {
+ if (i < GPIO_SPEED) {
+ dev_err(dev, "incorrect GPIO%d: %d\n",
+ i, gpio);
+ goto err_gpios;
+ } else {
+ dev_info(dev, "assuming board doesn't have "
+ "%s gpio\n", i == GPIO_SPEED ?
+ "speed" : "power");
+ continue;
+ }
+ }
+
+ ret = gpio_request(gpio, dev->bus_id);
+ if (ret) {
+ dev_err(dev, "failed to request gpio %d", i);
+ goto err_gpios;
+ }
+
+ if (i >= GPIO_SPEED) {
+ ret = gpio_direction_output(gpio, 0);
+ if (ret) {
+ dev_err(dev, "failed to set gpio %d as "
+ "an output\n", i);
+ i++;
+ goto err_gpios;
+ }
+ }
+ }
+
+ for (j = 0; j < NUM_PINS; j++) {
+ fhci->pins[j] = qe_pin_request(ofdev->node, j);
+ if (IS_ERR(fhci->pins[j])) {
+ ret = PTR_ERR(fhci->pins[j]);
+ dev_err(dev, "can't get pin %d: %d\n", j, ret);
+ goto err_pins;
+ }
+ }
+
+ /* Frame limit timer and its interrupt. */
+ fhci->timer = gtm_get_timer16();
+ if (IS_ERR(fhci->timer)) {
+ ret = PTR_ERR(fhci->timer);
+ dev_err(dev, "failed to request qe timer: %i", ret);
+ goto err_get_timer;
+ }
+
+ ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+ IRQF_DISABLED, "qe timer (usb)", hcd);
+ if (ret) {
+ dev_err(dev, "failed to request timer irq");
+ goto err_timer_irq;
+ }
+
+ /* USB Host interrupt. */
+ usb_irq = irq_of_parse_and_map(node, 0);
+ if (usb_irq == NO_IRQ) {
+ dev_err(dev, "could not get usb irq\n");
+ ret = -EINVAL;
+ goto err_usb_irq;
+ }
+
+ /* Clocks. */
+ sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+ if (sprop) {
+ fhci->fullspeed_clk = qe_clock_source(sprop);
+ if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+ dev_err(dev, "wrong fullspeed-clock\n");
+ ret = -EINVAL;
+ goto err_clocks;
+ }
+ }
+
+ sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+ if (sprop) {
+ fhci->lowspeed_clk = qe_clock_source(sprop);
+ if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+ dev_err(dev, "wrong lowspeed-clock\n");
+ ret = -EINVAL;
+ goto err_clocks;
+ }
+ }
+
+ if (fhci->fullspeed_clk == QE_CLK_NONE &&
+ fhci->lowspeed_clk == QE_CLK_NONE) {
+ dev_err(dev, "no clocks specified\n");
+ ret = -EINVAL;
+ goto err_clocks;
+ }
+
+ dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+ fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+ /* Start with full-speed, if possible. */
+ if (fhci->fullspeed_clk != QE_CLK_NONE) {
+ fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+ qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+ } else {
+ fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+ qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+ }
+
+ /* Clear and disable any pending interrupts. */
+ out_be16(&fhci->regs->usb_event, 0xffff);
+ out_be16(&fhci->regs->usb_mask, 0);
+
+ ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+ if (ret < 0)
+ goto err_add_hcd;
+
+ fhci_dfs_create(fhci);
+
+ return 0;
+
+err_add_hcd:
+err_clocks:
+ irq_dispose_mapping(usb_irq);
+err_usb_irq:
+ free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+ gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+ while (--j >= 0)
+ qe_pin_free(fhci->pins[j]);
+err_gpios:
+ while (--i >= 0) {
+ if (gpio_is_valid(fhci->gpios[i]))
+ gpio_free(fhci->gpios[i]);
+ }
+ cpm_muram_free(pram_addr);
+err_pram:
+ iounmap(hcd->regs);
+err_regs:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int __devexit fhci_remove(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ int i;
+ int j;
+
+ usb_remove_hcd(hcd);
+ free_irq(fhci->timer->irq, hcd);
+ gtm_put_timer16(fhci->timer);
+ cpm_muram_free(cpm_muram_offset(fhci->pram));
+ for (i = 0; i < NUM_GPIOS; i++) {
+ if (!gpio_is_valid(fhci->gpios[i]))
+ continue;
+ gpio_free(fhci->gpios[i]);
+ }
+ for (j = 0; j < NUM_PINS; j++)
+ qe_pin_free(fhci->pins[j]);
+ fhci_dfs_destroy(fhci);
+ usb_put_hcd(hcd);
+ return 0;
+}
+
+static int __devexit of_fhci_remove(struct of_device *ofdev)
+{
+ return fhci_remove(&ofdev->dev);
+}
+
+static struct of_device_id of_fhci_match[] = {
+ { .compatible = "fsl,mpc8323-qe-usb", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct of_platform_driver of_fhci_driver = {
+ .name = "fsl,usb-fhci",
+ .match_table = of_fhci_match,
+ .probe = of_fhci_probe,
+ .remove = __devexit_p(of_fhci_remove),
+};
+
+static int __init fhci_module_init(void)
+{
+ return of_register_platform_driver(&of_fhci_driver);
+}
+module_init(fhci_module_init);
+
+static void __exit fhci_module_exit(void)
+{
+ of_unregister_platform_driver(&of_fhci_driver);
+}
+module_exit(fhci_module_exit);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+ "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+ "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
new file mode 100644
index 00000000000..0cfaedc3e12
--- /dev/null
+++ b/drivers/usb/host/fhci-hub.c
@@ -0,0 +1,345 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+ 0x09, /* blength */
+ 0x29, /* bDescriptorType;hub-descriptor */
+ 0x01, /* bNbrPorts */
+ 0x00, /* wHubCharacteristics */
+ 0x00,
+ 0x01, /* bPwrOn2pwrGood;2ms */
+ 0x00, /* bHubContrCurrent;0mA */
+ 0x00, /* DeviceRemoveable */
+ 0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+ int gpio = fhci->gpios[gpio_nr];
+ bool alow = fhci->alow_gpios[gpio_nr];
+
+ if (!gpio_is_valid(gpio))
+ return;
+
+ gpio_set_value(gpio, on ^ alow);
+ mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+ enum fhci_port_status status)
+{
+ fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+ switch (status) {
+ case FHCI_PORT_POWER_OFF:
+ fhci_gpio_set_value(fhci, GPIO_POWER, false);
+ break;
+ case FHCI_PORT_DISABLED:
+ case FHCI_PORT_WAITING:
+ fhci_gpio_set_value(fhci, GPIO_POWER, true);
+ break;
+ case FHCI_PORT_LOW:
+ fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+ break;
+ case FHCI_PORT_FULL:
+ fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+ enum fhci_port_status port_status;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_stop_sof_timer(fhci);
+
+ fhci_flush_all_transmissions(usb);
+
+ fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+ port_status = usb->port_status;
+ usb->port_status = FHCI_PORT_DISABLED;
+
+ /* Enable IDLE since we want to know if something comes along */
+ usb->saved_msk |= USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+ /* check if during the disconnection process attached new device */
+ if (port_status == FHCI_PORT_WAITING)
+ fhci_device_connected_interrupt(fhci);
+ usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+ usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+ fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+ struct fhci_usb *usb = (struct fhci_usb *)lld;
+ struct fhci_hcd *fhci = usb->fhci;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_config_transceiver(fhci, usb->port_status);
+
+ if ((usb->port_status != FHCI_PORT_FULL) &&
+ (usb->port_status != FHCI_PORT_LOW))
+ fhci_start_sof_timer(fhci);
+
+ usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+ usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
+ gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
+ gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+
+ mdelay(5);
+
+ qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+ qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+ qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+ struct fhci_usb *usb = (struct fhci_usb *)lld;
+ struct fhci_hcd *fhci = usb->fhci;
+ u8 mode;
+ u16 mask;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_stop_sof_timer(fhci);
+ /* disable the USB controller */
+ mode = in_8(&fhci->regs->usb_mod);
+ out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
+
+ /* disable idle interrupts */
+ mask = in_be16(&fhci->regs->usb_mask);
+ out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
+
+ fhci_io_port_generate_reset(fhci);
+
+ /* enable interrupt on this endpoint */
+ out_be16(&fhci->regs->usb_mask, mask);
+
+ /* enable the USB controller */
+ mode = in_8(&fhci->regs->usb_mod);
+ out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
+ fhci_start_sof_timer(fhci);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ int ret = 0;
+ unsigned long flags;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+ USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+ USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+ *buf = 1 << 1;
+ ret = 1;
+ fhci_dbg(fhci, "-- %s\n", __func__);
+ }
+
+ spin_unlock_irqrestore(&fhci->lock, flags);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+
+ return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ int retval = 0;
+ int len = 0;
+ struct usb_hub_status *hub_status;
+ struct usb_port_status *port_status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ fhci->vroot_hub->feature &= (1 << wValue);
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_ENABLE;
+ fhci_port_disable(fhci);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_ENABLE;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_SUSPEND;
+ fhci_stop_sof_timer(fhci);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_SUSPEND;
+ break;
+ case USB_PORT_FEAT_POWER:
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_POWER;
+ fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_CONNECTION;
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_OVERCURRENT;
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_RESET;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case GetHubDescriptor:
+ memcpy(buf, root_hub_des, sizeof(root_hub_des));
+ buf[3] = 0x11; /* per-port power, no ovrcrnt */
+ len = (buf[0] < wLength) ? buf[0] : wLength;
+ break;
+ case GetHubStatus:
+ hub_status = (struct usb_hub_status *)buf;
+ hub_status->wHubStatus =
+ cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+ hub_status->wHubChange =
+ cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+ len = 4;
+ break;
+ case GetPortStatus:
+ port_status = (struct usb_port_status *)buf;
+ port_status->wPortStatus =
+ cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+ port_status->wPortChange =
+ cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+ len = 4;
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ fhci->vroot_hub->feature |= (1 << wValue);
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_ENABLE;
+ fhci_port_enable(fhci->usb_lld);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_SUSPEND;
+ fhci_stop_sof_timer(fhci);
+ break;
+ case USB_PORT_FEAT_RESET:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_RESET;
+ fhci_port_reset(fhci->usb_lld);
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_ENABLE;
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_RESET;
+ break;
+ case USB_PORT_FEAT_POWER:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_POWER;
+ fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+ break;
+ default:
+ goto error;
+ }
+ break;
+ default:
+error:
+ retval = -EPIPE;
+ }
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+
+ spin_unlock_irqrestore(&fhci->lock, flags);
+
+ return retval;
+}
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
new file mode 100644
index 00000000000..2c0736c9971
--- /dev/null
+++ b/drivers/usb/host/fhci-mem.c
@@ -0,0 +1,113 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+ memset(td, 0, sizeof(*td));
+ INIT_LIST_HEAD(&td->node);
+ INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+ memset(ed, 0, sizeof(*ed));
+ INIT_LIST_HEAD(&ed->td_list);
+ INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+ struct td *td;
+
+ if (!list_empty(&fhci->empty_tds)) {
+ td = list_entry(fhci->empty_tds.next, struct td, node);
+ list_del(fhci->empty_tds.next);
+ } else {
+ td = kmalloc(sizeof(*td), GFP_ATOMIC);
+ if (!td)
+ fhci_err(fhci, "No memory to allocate to TD\n");
+ else
+ init_td(td);
+ }
+
+ return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+ init_td(td);
+ list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+ struct ed *ed;
+
+ if (!list_empty(&fhci->empty_eds)) {
+ ed = list_entry(fhci->empty_eds.next, struct ed, node);
+ list_del(fhci->empty_eds.next);
+ } else {
+ ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+ if (!ed)
+ fhci_err(fhci, "No memory to allocate to ED\n");
+ else
+ init_ed(ed);
+ }
+
+ return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+ init_ed(ed);
+ list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+ struct urb_priv *urb_priv, struct ed *ed, u16 index,
+ enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+ u16 interval, u16 start_frame, bool ioc)
+{
+ struct td *td = get_empty_td(fhci);
+
+ if (!td)
+ return NULL;
+
+ td->urb = urb;
+ td->ed = ed;
+ td->type = type;
+ td->toggle = toggle;
+ td->data = data;
+ td->len = len;
+ td->iso_index = index;
+ td->interval = interval;
+ td->start_frame = start_frame;
+ td->ioc = ioc;
+ td->status = USB_TD_OK;
+
+ urb_priv->tds[index] = td;
+
+ return td;
+}
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
new file mode 100644
index 00000000000..b0a1446ba29
--- /dev/null
+++ b/drivers/usb/host/fhci-q.c
@@ -0,0 +1,284 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+ if (status == USB_TD_OK)
+ return 0;
+ else if (status & USB_TD_RX_ER_CRC)
+ return -EILSEQ;
+ else if (status & USB_TD_RX_ER_NONOCT)
+ return -EPROTO;
+ else if (status & USB_TD_RX_ER_OVERUN)
+ return -ECOMM;
+ else if (status & USB_TD_RX_ER_BITSTUFF)
+ return -EPROTO;
+ else if (status & USB_TD_RX_ER_PID)
+ return -EILSEQ;
+ else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+ return -ETIMEDOUT;
+ else if (status & USB_TD_TX_ER_STALL)
+ return -EPIPE;
+ else if (status & USB_TD_TX_ER_UNDERUN)
+ return -ENOSR;
+ else if (status & USB_TD_RX_DATA_UNDERUN)
+ return -EREMOTEIO;
+ else if (status & USB_TD_RX_DATA_OVERUN)
+ return -EOVERFLOW;
+ else
+ return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+ list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+ int i;
+
+ for (i = 0; i < number; i++) {
+ struct td *td = td_list[i];
+ list_add_tail(&td->node, &ed->td_list);
+ }
+ if (ed->td_head == NULL)
+ ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+ struct td *td;
+
+ if (!list_empty(&ed->td_list))
+ td = list_entry(ed->td_list.next, struct td, node);
+ else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+ struct td *td;
+
+ if (!list_empty(&frame->tds_list)) {
+ td = list_entry(frame->tds_list.next, struct td, frame_lh);
+ list_del_init(frame->tds_list.next);
+ } else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+ struct td *td;
+
+ if (!list_empty(&frame->tds_list))
+ td = list_entry(frame->tds_list.next, struct td, frame_lh);
+ else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+ struct td *td;
+
+ if (!list_empty(&ed->td_list)) {
+ td = list_entry(ed->td_list.next, struct td, node);
+ list_del_init(ed->td_list.next);
+
+ /* if this TD was the ED's head, find next TD */
+ if (!list_empty(&ed->td_list))
+ ed->td_head = list_entry(ed->td_list.next, struct td,
+ node);
+ else
+ ed->td_head = NULL;
+ } else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+ struct td *td;
+
+ if (!list_empty(&p_list->done_list)) {
+ td = list_entry(p_list->done_list.next, struct td, node);
+ list_del_init(p_list->done_list.next);
+ } else
+ td = NULL;
+
+ return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+ struct td *td;
+
+ td = ed->td_head;
+ list_del_init(&td->node);
+
+ /* If this TD was the ED's head,find next TD */
+ if (!list_empty(&ed->td_list))
+ ed->td_head = list_entry(ed->td_list.next, struct td, node);
+ else {
+ ed->td_head = NULL;
+ ed->state = FHCI_ED_SKIP;
+ }
+ ed->toggle_carry = td->toggle;
+ list_add_tail(&td->node, &usb->hc_list->done_list);
+ if (td->ioc)
+ usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+ int i;
+ struct urb_priv *urb_priv = urb->hcpriv;
+ struct ed *ed = urb_priv->ed;
+
+ for (i = 0; i < urb_priv->num_of_tds; i++) {
+ list_del_init(&urb_priv->tds[i]->node);
+ fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+ }
+
+ /* if this TD was the ED's head,find the next TD */
+ if (!list_empty(&ed->td_list))
+ ed->td_head = list_entry(ed->td_list.next, struct td, node);
+ else
+ ed->td_head = NULL;
+
+ kfree(urb_priv->tds);
+ kfree(urb_priv);
+ urb->hcpriv = NULL;
+
+ /* if this TD was the ED's head,find next TD */
+ if (ed->td_head == NULL)
+ list_del_init(&ed->node);
+ fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+ free_urb_priv(fhci, urb);
+
+ if (urb->status == -EINPROGRESS) {
+ if (urb->actual_length != urb->transfer_buffer_length &&
+ urb->transfer_flags & URB_SHORT_NOT_OK)
+ urb->status = -EREMOTEIO;
+ else
+ urb->status = 0;
+ }
+
+ usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+ spin_unlock(&fhci->lock);
+
+ usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+ spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+ struct ed *ed = td->ed;
+ u32 cc = td->status;
+
+ /* ISO...drivers see per-TD length/status */
+ if (ed->mode == FHCI_TF_ISO) {
+ u32 len;
+ if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+ cc == USB_TD_RX_DATA_UNDERUN))
+ cc = USB_TD_OK;
+
+ if (usb_pipeout(urb->pipe))
+ len = urb->iso_frame_desc[td->iso_index].length;
+ else
+ len = td->actual_len;
+
+ urb->actual_length += len;
+ urb->iso_frame_desc[td->iso_index].actual_length = len;
+ urb->iso_frame_desc[td->iso_index].status =
+ status_to_error(cc);
+ }
+
+ /* BULK,INT,CONTROL... drivers see aggregate length/status,
+ * except that "setup" bytes aren't counted and "short" transfers
+ * might not be reported as errors.
+ */
+ else {
+ if (td->error_cnt >= 3)
+ urb->error_count = 3;
+
+ /* control endpoint only have soft stalls */
+
+ /* update packet status if needed(short may be ok) */
+ if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ cc == USB_TD_RX_DATA_UNDERUN) {
+ ed->state = FHCI_ED_OPER;
+ cc = USB_TD_OK;
+ }
+ if (cc != USB_TD_OK) {
+ if (urb->status == -EINPROGRESS)
+ urb->status = status_to_error(cc);
+ }
+
+ /* count all non-empty packets except control SETUP packet */
+ if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+ urb->actual_length += td->actual_len;
+ }
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+ struct td *td = peek_td_from_ed(ed);
+ struct urb *urb = td->urb;
+ struct urb_priv *urb_priv = urb->hcpriv;
+
+ if (urb_priv->state == URB_DEL) {
+ td = fhci_remove_td_from_ed(ed);
+ /* HC may have partly processed this TD */
+ if (td->status != USB_TD_INPROGRESS)
+ fhci_done_td(urb, td);
+
+ /* URB is done;clean up */
+ if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+ fhci_urb_complete_free(fhci, urb);
+ }
+}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
new file mode 100644
index 00000000000..bb63b68ddb7
--- /dev/null
+++ b/drivers/usb/host/fhci-sched.c
@@ -0,0 +1,888 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+ pkt->data = NULL;
+ pkt->len = 0;
+ pkt->status = USB_TD_OK;
+ pkt->info = 0;
+ pkt->priv_data = NULL;
+
+ cq_put(usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+ struct td *td;
+ struct packet *td_pkt;
+ struct ed *ed;
+ u32 trans_len;
+ bool td_done = false;
+
+ td = fhci_remove_td_from_frame(usb->actual_frame);
+ td_pkt = td->pkt;
+ trans_len = pkt->len;
+ td->status = pkt->status;
+ if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+ if ((td->data + td->actual_len) && trans_len)
+ memcpy(td->data + td->actual_len, pkt->data,
+ trans_len);
+ cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+ }
+
+ recycle_frame(usb, pkt);
+
+ ed = td->ed;
+ if (ed->mode == FHCI_TF_ISO) {
+ if (ed->td_list.next->next != &ed->td_list) {
+ struct td *td_next =
+ list_entry(ed->td_list.next->next, struct td,
+ node);
+
+ td_next->start_frame = usb->actual_frame->frame_num;
+ }
+ td->actual_len = trans_len;
+ td_done = true;
+ } else if ((td->status & USB_TD_ERROR) &&
+ !(td->status & USB_TD_TX_ER_NAK)) {
+ /*
+ * There was an error on the transaction (but not NAK).
+ * If it is fatal error (data underrun, stall, bad pid or 3
+ * errors exceeded), mark this TD as done.
+ */
+ if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+ (td->status & USB_TD_TX_ER_STALL) ||
+ (td->status & USB_TD_RX_ER_PID) ||
+ (++td->error_cnt >= 3)) {
+ ed->state = FHCI_ED_HALTED;
+ td_done = true;
+
+ if (td->status & USB_TD_RX_DATA_UNDERUN) {
+ fhci_dbg(usb->fhci, "td err fu\n");
+ td->toggle = !td->toggle;
+ td->actual_len += trans_len;
+ } else {
+ fhci_dbg(usb->fhci, "td err f!u\n");
+ }
+ } else {
+ fhci_dbg(usb->fhci, "td err !f\n");
+ /* it is not a fatal error -retry this transaction */
+ td->nak_cnt = 0;
+ td->error_cnt++;
+ td->status = USB_TD_OK;
+ }
+ } else if (td->status & USB_TD_TX_ER_NAK) {
+ /* there was a NAK response */
+ fhci_vdbg(usb->fhci, "td nack\n");
+ td->nak_cnt++;
+ td->error_cnt = 0;
+ td->status = USB_TD_OK;
+ } else {
+ /* there was no error on transaction */
+ td->error_cnt = 0;
+ td->nak_cnt = 0;
+ td->toggle = !td->toggle;
+ td->actual_len += trans_len;
+
+ if (td->len == td->actual_len)
+ td_done = true;
+ }
+
+ if (td_done)
+ fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are allready scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+ u8 mode;
+ struct td *td;
+
+ mode = in_8(&usb->fhci->regs->usb_mod);
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+ fhci_flush_bds(usb);
+
+ while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+ struct packet *pkt = td->pkt;
+
+ pkt->status = USB_TD_TX_ER_TIMEOUT;
+ fhci_transaction_confirm(usb, pkt);
+ }
+
+ usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+ /* reset the event register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ /* enable the USB controller */
+ out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+ u32 fw_transaction_time, len = 0;
+ struct packet *pkt;
+ u8 *data = NULL;
+
+ /* calcalate data address,len and toggle and then add the transaction */
+ if (td->toggle == USB_TD_TOGGLE_CARRY)
+ td->toggle = ed->toggle_carry;
+
+ switch (ed->mode) {
+ case FHCI_TF_ISO:
+ len = td->len;
+ if (td->type != FHCI_TA_IN)
+ data = td->data;
+ break;
+ case FHCI_TF_CTRL:
+ case FHCI_TF_BULK:
+ len = min(td->len - td->actual_len, ed->max_pkt_size);
+ if (!((td->type == FHCI_TA_IN) &&
+ ((len + td->actual_len) == td->len)))
+ data = td->data + td->actual_len;
+ break;
+ case FHCI_TF_INTR:
+ len = min(td->len, ed->max_pkt_size);
+ if (!((td->type == FHCI_TA_IN) &&
+ ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+ data = td->data;
+ break;
+ default:
+ break;
+ }
+
+ if (usb->port_status == FHCI_PORT_FULL)
+ fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+ else
+ fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+ /* check if there's enough space in this frame to submit this TD */
+ if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+ usb->max_bytes_per_frame) {
+ fhci_vdbg(usb->fhci, "not enough space in this frame: "
+ "%d %d %d\n", usb->actual_frame->total_bytes, len,
+ usb->max_bytes_per_frame);
+ return -1;
+ }
+
+ /* check if there's enough time in this frame to submit this TD */
+ if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+ (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+ (fw_transaction_time + usb->sw_transaction_time >=
+ 1000 - fhci_get_sof_timer_count(usb)))) {
+ fhci_dbg(usb->fhci, "not enough time in this frame\n");
+ return -1;
+ }
+
+ /* update frame object fields before transmitting */
+ pkt = cq_get(usb->ep0->empty_frame_Q);
+ if (!pkt) {
+ fhci_dbg(usb->fhci, "there is no empty frame\n");
+ return -1;
+ }
+ td->pkt = pkt;
+
+ pkt->info = 0;
+ if (data == NULL) {
+ data = cq_get(usb->ep0->dummy_packets_Q);
+ BUG_ON(!data);
+ pkt->info = PKT_DUMMY_PACKET;
+ }
+ pkt->data = data;
+ pkt->len = len;
+ pkt->status = USB_TD_OK;
+ /* update TD status field before transmitting */
+ td->status = USB_TD_INPROGRESS;
+ /* update actual frame time object with the actual transmission */
+ usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+ fhci_add_td_to_frame(usb->actual_frame, td);
+
+ if (usb->port_status != FHCI_PORT_FULL &&
+ usb->port_status != FHCI_PORT_LOW) {
+ pkt->status = USB_TD_TX_ER_TIMEOUT;
+ pkt->len = 0;
+ fhci_transaction_confirm(usb, pkt);
+ } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+ ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+ /* remove TD from actual frame */
+ list_del_init(&td->frame_lh);
+ td->status = USB_TD_OK;
+ if (pkt->info & PKT_DUMMY_PACKET)
+ cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+ recycle_frame(usb, pkt);
+ usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+ fhci_err(usb->fhci, "host transaction failed\n");
+ return -1;
+ }
+
+ return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+ struct list_head *node = list->next;
+
+ if (!list_empty(list)) {
+ list_del(node);
+ list_add_tail(node, list);
+ }
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+ struct list_head *list, enum fhci_tf_mode list_type)
+{
+ static const int frame_part[4] = {
+ [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+ [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+ MAX_PERIODIC_FRAME_USAGE) / 100,
+ [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+ [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+ MAX_PERIODIC_FRAME_USAGE) / 100
+ };
+ struct ed *ed;
+ struct td *td;
+ int ans = 1;
+ u32 save_transaction_time = usb->sw_transaction_time;
+
+ list_for_each_entry(ed, list, node) {
+ td = ed->td_head;
+
+ if (!td || (td && td->status == USB_TD_INPROGRESS))
+ continue;
+
+ if (ed->state != FHCI_ED_OPER) {
+ if (ed->state == FHCI_ED_URB_DEL) {
+ td->status = USB_TD_OK;
+ fhci_move_td_from_ed_to_done_list(usb, ed);
+ ed->state = FHCI_ED_SKIP;
+ }
+ continue;
+ }
+
+ /*
+ * if it isn't interrupt pipe or it is not iso pipe and the
+ * interval time passed
+ */
+ if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+ (((usb->actual_frame->frame_num -
+ td->start_frame) & 0x7ff) < td->interval))
+ continue;
+
+ if (add_packet(usb, ed, td) < 0)
+ continue;
+
+ /* update time stamps in the TD */
+ td->start_frame = usb->actual_frame->frame_num;
+ usb->sw_transaction_time += save_transaction_time;
+
+ if (usb->actual_frame->total_bytes >=
+ usb->max_bytes_per_frame) {
+ usb->actual_frame->frame_status =
+ FRAME_DATA_END_TRANSMISSION;
+ fhci_push_dummy_bd(usb->ep0);
+ ans = 0;
+ break;
+ }
+
+ if (usb->actual_frame->total_bytes >= frame_part[list_type])
+ break;
+ }
+
+ /* be fair to each ED(move list head around) */
+ move_head_to_tail(list);
+ usb->sw_transaction_time = save_transaction_time;
+
+ return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (!list_empty(&usb->actual_frame->tds_list)) {
+ if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+ usb->actual_frame->frame_num) & 0x7ff) > 5)
+ fhci_flush_actual_frame(usb);
+ else
+ return -EINVAL;
+ }
+
+ usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+ usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+ usb->actual_frame->total_bytes = 0;
+
+ return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+ int left = 1;
+
+ if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+ if (rotate_frames(usb) != 0)
+ return;
+
+ if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+ return;
+
+ if (usb->actual_frame->total_bytes == 0) {
+ /*
+ * schedule the next available ISO transfer
+ *or next stage of the ISO transfer
+ */
+ scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+ /*
+ * schedule the next available interrupt transfer or
+ * the next stage of the interrupt transfer
+ */
+ scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+ /*
+ * schedule the next available control transfer
+ * or the next stage of the control transfer
+ */
+ left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+ FHCI_TF_CTRL);
+ }
+
+ /*
+ * schedule the next available bulk transfer or the next stage of the
+ * bulk transfer
+ */
+ if (left > 0)
+ scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ if ((usb->port_status == FHCI_PORT_DISABLED) &&
+ (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+ !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+ if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+ usb->port_status = FHCI_PORT_LOW;
+ else
+ usb->port_status = FHCI_PORT_FULL;
+ /* Disable IDLE */
+ usb->saved_msk &= ~USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+ }
+
+ gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+ fhci_host_transmit_actual_frame(usb);
+ usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+ fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_usb_disable_interrupt(usb);
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+ usb->port_status = FHCI_PORT_DISABLED;
+
+ fhci_stop_sof_timer(fhci);
+
+ /* Enable IDLE since we want to know if something comes along */
+ usb->saved_msk |= USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+ usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+ usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ usb->max_bytes_per_frame = 0;
+ fhci_usb_enable_interrupt(usb);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+ struct fhci_usb *usb = fhci->usb_lld;
+ int state;
+ int ret;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_usb_disable_interrupt(usb);
+ state = fhci_ioports_check_bus_state(fhci);
+
+ /* low-speed device was connected to the USB port */
+ if (state == 1) {
+ ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+ if (ret) {
+ fhci_warn(fhci, "Low-Speed device is not supported, "
+ "try use BRGx\n");
+ goto out;
+ }
+
+ usb->port_status = FHCI_PORT_LOW;
+ setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+ usb->vroot_hub->port.wPortStatus |=
+ (USB_PORT_STAT_LOW_SPEED |
+ USB_PORT_STAT_CONNECTION);
+ usb->vroot_hub->port.wPortChange |=
+ USB_PORT_STAT_C_CONNECTION;
+ usb->max_bytes_per_frame =
+ (MAX_BYTES_PER_FRAME >> 3) - 7;
+ fhci_port_enable(usb);
+ } else if (state == 2) {
+ ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+ if (ret) {
+ fhci_warn(fhci, "Full-Speed device is not supported, "
+ "try use CLKx\n");
+ goto out;
+ }
+
+ usb->port_status = FHCI_PORT_FULL;
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+ usb->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_LOW_SPEED;
+ usb->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_CONNECTION;
+ usb->vroot_hub->port.wPortChange |=
+ USB_PORT_STAT_C_CONNECTION;
+ usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+ fhci_port_enable(usb);
+ }
+out:
+ fhci_usb_enable_interrupt(usb);
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+ struct usb_hcd *hcd = _hcd;
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ spin_lock(&fhci->lock);
+
+ gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+ if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+ usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+ fhci_push_dummy_bd(usb->ep0);
+ }
+
+ fhci_schedule_transactions(usb);
+
+ spin_unlock(&fhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+ fhci_dbg(usb->fhci, "-> %s\n", __func__);
+ /* issue stop Tx command */
+ qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+ /* flush Tx FIFOs */
+ out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO);
+ udelay(1000);
+ /* reset Tx BDs */
+ fhci_flush_bds(usb);
+ /* issue restart Tx command */
+ qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+ fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ struct fhci_usb *usb;
+ u16 usb_er = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ usb = fhci->usb_lld;
+
+ usb_er |= in_be16(&usb->fhci->regs->usb_event) &
+ in_be16(&usb->fhci->regs->usb_mask);
+
+ /* clear event bits for next time */
+ out_be16(&usb->fhci->regs->usb_event, usb_er);
+
+ fhci_dbg_isr(fhci, usb_er);
+
+ if (usb_er & USB_E_RESET_MASK) {
+ if ((usb->port_status == FHCI_PORT_FULL) ||
+ (usb->port_status == FHCI_PORT_LOW)) {
+ fhci_device_disconnected_interrupt(fhci);
+ usb_er &= ~USB_E_IDLE_MASK;
+ } else if (usb->port_status == FHCI_PORT_WAITING) {
+ usb->port_status = FHCI_PORT_DISCONNECTING;
+
+ /* Turn on IDLE since we want to disconnect */
+ usb->saved_msk |= USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_event,
+ usb->saved_msk);
+ } else if (usb->port_status == FHCI_PORT_DISABLED) {
+ if (fhci_ioports_check_bus_state(fhci) == 1 &&
+ usb->port_status != FHCI_PORT_LOW &&
+ usb->port_status != FHCI_PORT_FULL)
+ fhci_device_connected_interrupt(fhci);
+ }
+ usb_er &= ~USB_E_RESET_MASK;
+ }
+
+ if (usb_er & USB_E_MSF_MASK) {
+ abort_transmission(fhci->usb_lld);
+ usb_er &= ~USB_E_MSF_MASK;
+ }
+
+ if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+ sof_interrupt(fhci);
+ usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+ }
+
+ if (usb_er & USB_E_TXB_MASK) {
+ fhci_tx_conf_interrupt(fhci->usb_lld);
+ usb_er &= ~USB_E_TXB_MASK;
+ }
+
+ if (usb_er & USB_E_TXE1_MASK) {
+ fhci_tx_conf_interrupt(fhci->usb_lld);
+ usb_er &= ~USB_E_TXE1_MASK;
+ }
+
+ if (usb_er & USB_E_IDLE_MASK) {
+ if (usb->port_status == FHCI_PORT_DISABLED &&
+ usb->port_status != FHCI_PORT_LOW &&
+ usb->port_status != FHCI_PORT_FULL) {
+ usb_er &= ~USB_E_RESET_MASK;
+ fhci_device_connected_interrupt(fhci);
+ } else if (usb->port_status ==
+ FHCI_PORT_DISCONNECTING) {
+ /* XXX usb->port_status = FHCI_PORT_WAITING; */
+ /* Disable IDLE */
+ usb->saved_msk &= ~USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask,
+ usb->saved_msk);
+ } else {
+ fhci_dbg_isr(fhci, -1);
+ }
+
+ usb_er &= ~USB_E_IDLE_MASK;
+ }
+
+ spin_unlock_irqrestore(&fhci->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or sucess) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+ struct urb *urb;
+ struct ed *ed;
+ struct td *td;
+ struct urb_priv *urb_priv;
+ struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+ disable_irq(fhci->timer->irq);
+ disable_irq(fhci_to_hcd(fhci)->irq);
+ spin_lock(&fhci->lock);
+
+ td = fhci_remove_td_from_done_list(fhci->hc_list);
+ while (td != NULL) {
+ urb = td->urb;
+ urb_priv = urb->hcpriv;
+ ed = td->ed;
+
+ /* update URB's length and status from TD */
+ fhci_done_td(urb, td);
+ urb_priv->tds_cnt++;
+
+ /*
+ * if all this urb's TDs are done, call complete()
+ * Interrupt transfers are the onley special case:
+ * they are reissued,until "deleted" by usb_unlink_urb
+ * (real work done in a SOF intr, by process_del_list)
+ */
+ if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+ fhci_urb_complete_free(fhci, urb);
+ } else if (urb_priv->state == URB_DEL &&
+ ed->state == FHCI_ED_SKIP) {
+ fhci_del_ed_list(fhci, ed);
+ ed->state = FHCI_ED_OPER;
+ } else if (ed->state == FHCI_ED_HALTED) {
+ urb_priv->state = URB_DEL;
+ ed->state = FHCI_ED_URB_DEL;
+ fhci_del_ed_list(fhci, ed);
+ ed->state = FHCI_ED_OPER;
+ }
+
+ td = fhci_remove_td_from_done_list(fhci->hc_list);
+ }
+
+ spin_unlock(&fhci->lock);
+ enable_irq(fhci->timer->irq);
+ enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET(fhci_tasklet, process_done_list, 0);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+ if (!fhci->process_done_task->state)
+ tasklet_schedule(fhci->process_done_task);
+ return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci data structure for the Low level host controller
+ * ep USB Host endpoint data structure
+ * urb USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+ struct ed *ed = urb->ep->hcpriv;
+ struct urb_priv *urb_priv = urb->hcpriv;
+ u32 data_len = urb->transfer_buffer_length;
+ int urb_state = 0;
+ int toggle = 0;
+ struct td *td;
+ u8 *data;
+ u16 cnt = 0;
+
+ if (ed == NULL) {
+ ed = fhci_get_empty_ed(fhci);
+ ed->dev_addr = usb_pipedevice(urb->pipe);
+ ed->ep_addr = usb_pipeendpoint(urb->pipe);
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ ed->mode = FHCI_TF_CTRL;
+ break;
+ case PIPE_BULK:
+ ed->mode = FHCI_TF_BULK;
+ break;
+ case PIPE_INTERRUPT:
+ ed->mode = FHCI_TF_INTR;
+ break;
+ case PIPE_ISOCHRONOUS:
+ ed->mode = FHCI_TF_ISO;
+ break;
+ default:
+ break;
+ }
+ ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+ FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+ ed->max_pkt_size = usb_maxpacket(urb->dev,
+ urb->pipe, usb_pipeout(urb->pipe));
+ urb->ep->hcpriv = ed;
+ fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+ ed->speed, ed->max_pkt_size);
+ }
+
+ /* for ISO transfer calculate start frame index */
+ if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
+ urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+ get_frame_num(fhci);
+
+ /*
+ * OHCI handles the DATA toggle itself,we just use the USB
+ * toggle bits
+ */
+ if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe)))
+ toggle = USB_TD_TOGGLE_CARRY;
+ else {
+ toggle = USB_TD_TOGGLE_DATA0;
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 1);
+ }
+
+ urb_priv->tds_cnt = 0;
+ urb_priv->ed = ed;
+ if (data_len > 0)
+ data = urb->transfer_buffer;
+ else
+ data = NULL;
+
+ switch (ed->mode) {
+ case FHCI_TF_BULK:
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ urb->transfer_buffer_length > 0 &&
+ ((urb->transfer_buffer_length %
+ usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe))) == 0))
+ urb_state = US_BULK0;
+ while (data_len > 4096) {
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ cnt ? USB_TD_TOGGLE_CARRY :
+ toggle,
+ data, 4096, 0, 0, true);
+ data += 4096;
+ data_len -= 4096;
+ cnt++;
+ }
+
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+ cnt ? USB_TD_TOGGLE_CARRY : toggle,
+ data, data_len, 0, 0, true);
+ cnt++;
+
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ cnt < urb_priv->num_of_tds) {
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+ cnt++;
+ }
+ break;
+ case FHCI_TF_INTR:
+ urb->start_frame = get_frame_num(fhci) + 1;
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+ USB_TD_TOGGLE_DATA0, data, data_len,
+ urb->interval, urb->start_frame, true);
+ break;
+ case FHCI_TF_CTRL:
+ ed->dev_addr = usb_pipedevice(urb->pipe);
+ ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+ USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+ if (data_len > 0) {
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+ true);
+ }
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+ usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
+ USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+ urb_state = US_CTRL_SETUP;
+ break;
+ case FHCI_TF_ISO:
+ for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+ u16 frame = urb->start_frame;
+
+ /*
+ * FIXME scheduling should handle frame counter
+ * roll-around ... exotic case (and OHCI has
+ * a 2^16 iso range, vs other HCs max of 2^10)
+ */
+ frame += cnt * urb->interval;
+ frame &= 0x07ff;
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ USB_TD_TOGGLE_DATA0,
+ data + urb->iso_frame_desc[cnt].offset,
+ urb->iso_frame_desc[cnt].length,
+ urb->interval, frame, true);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * set the state of URB
+ * control pipe:3 states -- setup,data,status
+ * interrupt and bulk pipe:1 state -- data
+ */
+ urb->pipe &= ~0x1f;
+ urb->pipe |= urb_state & 0x1f;
+
+ urb_priv->state = URB_INPROGRESS;
+
+ if (!ed->td_head) {
+ ed->state = FHCI_ED_OPER;
+ switch (ed->mode) {
+ case FHCI_TF_CTRL:
+ list_add(&ed->node, &fhci->hc_list->ctrl_list);
+ break;
+ case FHCI_TF_BULK:
+ list_add(&ed->node, &fhci->hc_list->bulk_list);
+ break;
+ case FHCI_TF_INTR:
+ list_add(&ed->node, &fhci->hc_list->intr_list);
+ break;
+ case FHCI_TF_ISO:
+ list_add(&ed->node, &fhci->hc_list->iso_list);
+ break;
+ default:
+ break;
+ }
+ }
+
+ fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+ fhci->active_urbs++;
+}
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
new file mode 100644
index 00000000000..b4033229031
--- /dev/null
+++ b/drivers/usb/host/fhci-tds.c
@@ -0,0 +1,626 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER 0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R 0x8000 /* ready bit */
+#define TD_W 0x2000 /* wrap bit */
+#define TD_I 0x1000 /* interrupt on completion */
+#define TD_L 0x0800 /* last */
+#define TD_TC 0x0400 /* transmit CRC */
+#define TD_CNF 0x0200 /* CNF - Must be always 1 */
+#define TD_LSP 0x0100 /* Low-speed transaction */
+#define TD_PID 0x00c0 /* packet id */
+#define TD_RXER 0x0020 /* Rx error or not */
+
+#define TD_NAK 0x0010 /* No ack. */
+#define TD_STAL 0x0008 /* Stall recieved */
+#define TD_TO 0x0004 /* time out */
+#define TD_UN 0x0002 /* underrun */
+#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB 0x0008 /* Frame Aborted */
+#define TD_CR 0x0004 /* CRC Error */
+#define TD_OV 0x0002 /* Overrun */
+#define TD_BOV 0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \
+ TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0 0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP 0x0000
+#define TD_TOK_OUT 0x4000
+#define TD_TOK_IN 0x8000
+#define TD_ISO 0x1000
+#define TD_ENDP 0x0780
+#define TD_ADDR 0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+ __be16 status;
+ __be16 length;
+ __be32 buf_ptr;
+ __be16 extra;
+ __be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+ struct usb_td __iomem *td,
+ u16 status)
+{
+ if (status & TD_W)
+ return base;
+ else
+ return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+ if (ep->already_pushed_dummy_bd == false) {
+ u16 td_status = in_be16(&ep->empty_td->status);
+
+ out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+ /* get the next TD in the ring */
+ ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+ ep->already_pushed_dummy_bd = true;
+ }
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+ struct endpoint *ep;
+ int size;
+
+ ep = usb->ep0;
+ if (ep) {
+ if (ep->td_base)
+ cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+ if (ep->conf_frame_Q) {
+ size = cq_howmany(ep->conf_frame_Q);
+ for (; size; size--) {
+ struct packet *pkt = cq_get(ep->conf_frame_Q);
+
+ kfree(pkt);
+ }
+ cq_delete(ep->conf_frame_Q);
+ }
+
+ if (ep->empty_frame_Q) {
+ size = cq_howmany(ep->empty_frame_Q);
+ for (; size; size--) {
+ struct packet *pkt = cq_get(ep->empty_frame_Q);
+
+ kfree(pkt);
+ }
+ cq_delete(ep->empty_frame_Q);
+ }
+
+ if (ep->dummy_packets_Q) {
+ size = cq_howmany(ep->dummy_packets_Q);
+ for (; size; size--) {
+ u8 *buff = cq_get(ep->dummy_packets_Q);
+
+ kfree(buff);
+ }
+ cq_delete(ep->dummy_packets_Q);
+ }
+
+ kfree(ep);
+ usb->ep0 = NULL;
+ }
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb A pointer to the data structure of the USB
+ * data_mem The data memory partition(BUS)
+ * ring_len TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+ u32 ring_len)
+{
+ struct endpoint *ep;
+ struct usb_td __iomem *td;
+ unsigned long ep_offset;
+ char *err_for = "enpoint PRAM";
+ int ep_mem_size;
+ u32 i;
+
+ /* we need at least 3 TDs in the ring */
+ if (!(ring_len > 2)) {
+ fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+ return -EINVAL;
+ }
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+ ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+ if (IS_ERR_VALUE(ep_offset))
+ goto err;
+ ep->td_base = cpm_muram_addr(ep_offset);
+
+ /* zero all queue pointers */
+ ep->conf_frame_Q = cq_new(ring_len + 2);
+ ep->empty_frame_Q = cq_new(ring_len + 2);
+ ep->dummy_packets_Q = cq_new(ring_len + 2);
+ if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) {
+ err_for = "frame_queues";
+ goto err;
+ }
+
+ for (i = 0; i < (ring_len + 1); i++) {
+ struct packet *pkt;
+ u8 *buff;
+
+ pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+ if (!pkt) {
+ err_for = "frame";
+ goto err;
+ }
+
+ buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
+ if (!buff) {
+ kfree(pkt);
+ err_for = "buffer";
+ goto err;
+ }
+ cq_put(ep->empty_frame_Q, pkt);
+ cq_put(ep->dummy_packets_Q, buff);
+ }
+
+ /* we put the endpoint parameter RAM right behind the TD ring */
+ ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+ ep->conf_td = ep->td_base;
+ ep->empty_td = ep->td_base;
+
+ ep->already_pushed_dummy_bd = false;
+
+ /* initialize tds */
+ td = ep->td_base;
+ for (i = 0; i < ring_len; i++) {
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->status, 0);
+ out_be16(&td->length, 0);
+ out_be16(&td->extra, 0);
+ td++;
+ }
+ td--;
+ out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+ out_be16(&td->length, 0);
+
+ /* endpoint structure has been created */
+ usb->ep0 = ep;
+
+ return 0;
+err:
+ fhci_ep0_free(usb);
+ kfree(ep);
+ fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+ return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb A pointer to the data strucutre of the USB
+ * ep A pointer to the endpoint structre
+ * data_mem The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+ enum fhci_mem_alloc data_mem)
+{
+ u8 rt;
+
+ /* set the endpoint registers according to the endpoint */
+ out_be16(&usb->fhci->regs->usb_ep[0],
+ USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+ out_be16(&usb->fhci->pram->ep_ptr[0],
+ cpm_muram_offset(ep->ep_pram_ptr));
+
+ rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+ if (data_mem == MEM_SECONDARY)
+ rt |= BUS_MODE_DTB;
+#endif
+ out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+ out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+ out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+ out_be16(&ep->ep_pram_ptr->rx_base, 0);
+ out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+ out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+ out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also prepearing the TDs for new frames. If the Tx interrupts
+ * are diabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called frome the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+ struct endpoint *ep = usb->ep0;
+ struct packet *pkt;
+ struct usb_td __iomem *td;
+ u16 extra_data;
+ u16 td_status;
+ u16 td_length;
+ u32 buf;
+
+ /*
+ * collect transmitted BDs from the chip. The routine clears all BDs
+ * with R bit = 0 and the pointer to data buffer is not NULL, that is
+ * BDs which point to the transmitted data buffer
+ */
+ while (1) {
+ td = ep->conf_td;
+ td_status = in_be16(&td->status);
+ td_length = in_be16(&td->length);
+ buf = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+
+ /* check if the TD is empty */
+ if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+ break;
+ /* check if it is a dummy buffer */
+ else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+ break;
+
+ /* mark TD as empty */
+ clrbits16(&td->status, ~TD_W);
+ out_be16(&td->length, 0);
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->extra, 0);
+ /* advance the TD pointer */
+ ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+ /* check if it is a dummy buffer(type2) */
+ if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+ continue;
+
+ pkt = cq_get(ep->conf_frame_Q);
+ if (!pkt)
+ fhci_err(usb->fhci, "no frame to confirm\n");
+
+ if (td_status & TD_ERRORS) {
+ if (td_status & TD_RXER) {
+ if (td_status & TD_CR)
+ pkt->status = USB_TD_RX_ER_CRC;
+ else if (td_status & TD_AB)
+ pkt->status = USB_TD_RX_ER_BITSTUFF;
+ else if (td_status & TD_OV)
+ pkt->status = USB_TD_RX_ER_OVERUN;
+ else if (td_status & TD_BOV)
+ pkt->status = USB_TD_RX_DATA_OVERUN;
+ else if (td_status & TD_NO)
+ pkt->status = USB_TD_RX_ER_NONOCT;
+ else
+ fhci_err(usb->fhci, "illegal error "
+ "occured\n");
+ } else if (td_status & TD_NAK)
+ pkt->status = USB_TD_TX_ER_NAK;
+ else if (td_status & TD_TO)
+ pkt->status = USB_TD_TX_ER_TIMEOUT;
+ else if (td_status & TD_UN)
+ pkt->status = USB_TD_TX_ER_UNDERUN;
+ else if (td_status & TD_STAL)
+ pkt->status = USB_TD_TX_ER_STALL;
+ else
+ fhci_err(usb->fhci, "illegal error occured\n");
+ } else if ((extra_data & TD_TOK_IN) &&
+ pkt->len > td_length - CRC_SIZE) {
+ pkt->status = USB_TD_RX_DATA_UNDERUN;
+ }
+
+ if (extra_data & TD_TOK_IN)
+ pkt->len = td_length - CRC_SIZE;
+ else if (pkt->info & PKT_ZLP)
+ pkt->len = 0;
+ else
+ pkt->len = td_length;
+
+ fhci_transaction_confirm(usb, pkt);
+ }
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb A pointer to the USB structure
+ * pkt A pointer to the user frame structure
+ * trans_type Transaction tyep - IN,OUT or SETUP
+ * dest_addr Device address - 0~127
+ * dest_ep Endpoint number of the device - 0~16
+ * trans_mode Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed USB speed - Low speed or FULL speed
+ * data_toggle Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+ struct packet *pkt,
+ enum fhci_ta_type trans_type,
+ u8 dest_addr,
+ u8 dest_ep,
+ enum fhci_tf_mode trans_mode,
+ enum fhci_speed dest_speed, u8 data_toggle)
+{
+ struct endpoint *ep = usb->ep0;
+ struct usb_td __iomem *td;
+ u16 extra_data;
+ u16 td_status;
+
+ fhci_usb_disable_interrupt(usb);
+ /* start from the next BD that should be filled */
+ td = ep->empty_td;
+ td_status = in_be16(&td->status);
+
+ if (td_status & TD_R && in_be16(&td->length)) {
+ /* if the TD is not free */
+ fhci_usb_enable_interrupt(usb);
+ return -1;
+ }
+
+ /* get the next TD in the ring */
+ ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+ fhci_usb_enable_interrupt(usb);
+ pkt->priv_data = td;
+ out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+ /* sets up transaction parameters - addr,endp,dir,and type */
+ extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+ switch (trans_type) {
+ case FHCI_TA_IN:
+ extra_data |= TD_TOK_IN;
+ break;
+ case FHCI_TA_OUT:
+ extra_data |= TD_TOK_OUT;
+ break;
+ case FHCI_TA_SETUP:
+ extra_data |= TD_TOK_SETUP;
+ break;
+ }
+ if (trans_mode == FHCI_TF_ISO)
+ extra_data |= TD_ISO;
+ out_be16(&td->extra, extra_data);
+
+ /* sets up the buffer descriptor */
+ td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+ if (!(pkt->info & PKT_NO_CRC))
+ td_status |= TD_TC;
+
+ switch (trans_type) {
+ case FHCI_TA_IN:
+ if (data_toggle)
+ pkt->info |= PKT_PID_DATA1;
+ else
+ pkt->info |= PKT_PID_DATA0;
+ break;
+ default:
+ if (data_toggle) {
+ td_status |= TD_PID_DATA1;
+ pkt->info |= PKT_PID_DATA1;
+ } else {
+ td_status |= TD_PID_DATA0;
+ pkt->info |= PKT_PID_DATA0;
+ }
+ break;
+ }
+
+ if ((dest_speed == FHCI_LOW_SPEED) &&
+ (usb->port_status == FHCI_PORT_FULL))
+ td_status |= TD_LSP;
+
+ out_be16(&td->status, td_status);
+
+ /* set up buffer length */
+ if (trans_type == FHCI_TA_IN)
+ out_be16(&td->length, pkt->len + CRC_SIZE);
+ else
+ out_be16(&td->length, pkt->len);
+
+ /* put the frame to the confirmation queue */
+ cq_put(ep->conf_frame_Q, pkt);
+
+ if (cq_howmany(ep->conf_frame_Q) == 1)
+ out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+ return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+ u16 extra_data;
+ u16 td_status;
+ u32 buf;
+ struct usb_td __iomem *td;
+ struct endpoint *ep = usb->ep0;
+
+ td = ep->td_base;
+ while (1) {
+ td_status = in_be16(&td->status);
+ buf = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+
+ /* if the TD is not empty - we'll confirm it as Timeout */
+ if (td_status & TD_R)
+ out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+ /* if this TD is dummy - let's skip this TD */
+ else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+ out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+ /* if this is the last TD - break */
+ if (td_status & TD_W)
+ break;
+
+ td++;
+ }
+
+ fhci_td_transaction_confirm(usb);
+
+ td = ep->td_base;
+ do {
+ out_be16(&td->status, 0);
+ out_be16(&td->length, 0);
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->extra, 0);
+ td++;
+ } while (!(in_be16(&td->status) & TD_W));
+ out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+ out_be16(&td->length, 0);
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->extra, 0);
+
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+ in_be16(&ep->ep_pram_ptr->tx_base));
+ out_be32(&ep->ep_pram_ptr->tx_state, 0);
+ out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+ ep->empty_td = ep->td_base;
+ ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+ u8 mode;
+ u16 tb_ptr;
+ u16 extra_data;
+ u16 td_status;
+ u32 buf_ptr;
+ struct usb_td __iomem *td;
+ struct endpoint *ep = usb->ep0;
+
+ /* disable the USB controller */
+ mode = in_8(&usb->fhci->regs->usb_mod);
+ out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
+
+ tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+ td = cpm_muram_addr(tb_ptr);
+ td_status = in_be16(&td->status);
+ buf_ptr = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+ do {
+ if (td_status & TD_R) {
+ out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+ } else {
+ out_be32(&td->buf_ptr, 0);
+ ep->already_pushed_dummy_bd = false;
+ break;
+ }
+
+ /* advance the TD pointer */
+ td = next_bd(ep->td_base, td, td_status);
+ td_status = in_be16(&td->status);
+ buf_ptr = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+ } while ((td_status & TD_R) || buf_ptr);
+
+ fhci_td_transaction_confirm(usb);
+
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+ in_be16(&ep->ep_pram_ptr->tx_base));
+ out_be32(&ep->ep_pram_ptr->tx_state, 0);
+ out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+ ep->empty_td = ep->td_base;
+ ep->conf_td = ep->td_base;
+
+ usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+ /* reset the event register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ /* enable the USB controller */
+ out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+ fhci_td_transaction_confirm(usb);
+
+ /*
+ * Schedule another transaction to this frame only if we have
+ * already confirmed all transaction in the frame.
+ */
+ if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+ (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+ (list_empty(&usb->actual_frame->tds_list)))
+ fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+ u16 tb_ptr;
+ u16 td_status;
+ struct usb_td __iomem *td;
+ struct endpoint *ep = usb->ep0;
+
+ tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+ td = cpm_muram_addr(tb_ptr);
+
+ if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+ struct usb_td __iomem *old_td = td;
+
+ ep->already_pushed_dummy_bd = false;
+ td_status = in_be16(&td->status);
+ /* gets the next TD in the ring */
+ td = next_bd(ep->td_base, td, td_status);
+ tb_ptr = cpm_muram_offset(td);
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+ /* start transmit only if we have something in the TDs */
+ if (in_be16(&td->status) & TD_R)
+ out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+ if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+ out_be32(&old_td->buf_ptr, 0);
+ ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+ td_status);
+ } else {
+ out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+ }
+ }
+}
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
new file mode 100644
index 00000000000..7116284ed21
--- /dev/null
+++ b/drivers/usb/host/fhci.h
@@ -0,0 +1,607 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+
+#define USB_CLOCK 48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS 32
+#define MAX_TDS 32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */
+#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */
+#define PKT_HOST_DATA 0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */
+#define PKT_ZLP 0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME 0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME 0x00020000 /* NACK packet */
+#define PKT_NO_PID 0x00010000 /* No PID */
+#define PKT_NO_CRC 0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK (0)
+#define TRANS_INPROGRESS (-1)
+#define TRANS_DISCARD (-2)
+#define TRANS_FAIL (-3)
+
+#define PS_INT 0
+#define PS_DISCONNECTED 1
+#define PS_CONNECTED 2
+#define PS_READY 3
+#define PS_MISSING 4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK 0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+ USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+ USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+ USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+ USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0 0
+#define USB_TD_TOGGLE_DATA1 1
+#define USB_TD_TOGGLE_CARRY 2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL 0x20 /* Global snooping */
+#define BUS_MODE_BO 0x18 /* Byte ordering */
+#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */
+#define BUS_MODE_DTB 0x02 /* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN 0x01
+#define USB_MODE_HOST 0x02
+#define USB_MODE_TEST 0x04
+#define USB_MODE_SFTE 0x08
+#define USB_MODE_RESUME 0x40
+#define USB_MODE_LSS 0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK 0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK 0xF000
+#define USB_EPNUM_SHIFT 12
+
+#define USB_TRANS_MODE_SHIFT 8
+#define USB_TRANS_CTR 0x0000
+#define USB_TRANS_INT 0x0100
+#define USB_TRANS_BULK 0x0200
+#define USB_TRANS_ISO 0x0300
+
+#define USB_EP_MF 0x0020
+#define USB_EP_RTE 0x0010
+
+#define USB_THS_SHIFT 2
+#define USB_THS_MASK 0x000c
+#define USB_THS_NORMAL 0x0
+#define USB_THS_IGNORE_IN 0x0004
+#define USB_THS_NACK 0x0008
+#define USB_THS_STALL 0x000c
+
+#define USB_RHS_SHIFT 0
+#define USB_RHS_MASK 0x0003
+#define USB_RHS_NORMAL 0x0
+#define USB_RHS_IGNORE_OUT 0x0001
+#define USB_RHS_NACK 0x0002
+#define USB_RHS_STALL 0x0003
+
+#define USB_RTHS_MASK 0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO 0x80
+#define USB_CMD_FLUSH_FIFO 0x40
+#define USB_CMD_ISFT 0x20
+#define USB_CMD_DSFT 0x10
+#define USB_CMD_EP_MASK 0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK 0x0800
+#define USB_E_SFT_MASK 0x0400
+#define USB_E_RESET_MASK 0x0200
+#define USB_E_IDLE_MASK 0x0100
+#define USB_E_TXE4_MASK 0x0080
+#define USB_E_TXE3_MASK 0x0040
+#define USB_E_TXE2_MASK 0x0020
+#define USB_E_TXE1_MASK 0x0010
+#define USB_E_SOF_MASK 0x0008
+#define USB_E_BSY_MASK 0x0004
+#define USB_E_TXB_MASK 0x0002
+#define USB_E_RXB_MASK 0x0001
+
+/* Freescale USB Host controller registers */
+struct fhci_regs {
+ u8 usb_mod; /* mode register */
+ u8 usb_addr; /* address register */
+ u8 usb_comm; /* command register */
+ u8 reserved1[1];
+ __be16 usb_ep[4]; /* endpoint register */
+ u8 reserved2[4];
+ __be16 usb_event; /* event register */
+ u8 reserved3[2];
+ __be16 usb_mask; /* mask register */
+ u8 reserved4[1];
+ u8 usb_status; /* status register */
+ __be16 usb_sof_tmr; /* Start Of Frame timer */
+ u8 reserved5[2];
+ __be16 usb_frame_num; /* frame number register */
+ u8 reserved6[1];
+};
+
+/* Freescale USB HOST */
+struct fhci_pram {
+ __be16 ep_ptr[4]; /* Endpoint porter reg */
+ __be32 rx_state; /* Rx internal state */
+ __be32 rx_ptr; /* Rx internal data pointer */
+ __be16 frame_num; /* Frame number */
+ __be16 rx_cnt; /* Rx byte count */
+ __be32 rx_temp; /* Rx temp */
+ __be32 rx_data_temp; /* Rx data temp */
+ __be16 rx_u_ptr; /* Rx microcode return address temp */
+ u8 reserved1[2]; /* reserved area */
+ __be32 sof_tbl; /* SOF lookup table pointer */
+ u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */
+ u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+ __be16 rx_base; /* Rx BD base address */
+ __be16 tx_base; /* Tx BD base address */
+ u8 rx_func_code; /* Rx function code */
+ u8 tx_func_code; /* Tx function code */
+ __be16 rx_buff_len; /* Rx buffer length */
+ __be16 rx_bd_ptr; /* Rx BD pointer */
+ __be16 tx_bd_ptr; /* Tx BD pointer */
+ __be32 tx_state; /* Tx internal state */
+ __be32 tx_ptr; /* Tx internal data pointer */
+ __be16 tx_crc; /* temp transmit CRC */
+ __be16 tx_cnt; /* Tx byte count */
+ __be32 tx_temp; /* Tx temp */
+ __be16 tx_u_ptr; /* Tx microcode return address temp */
+ __be16 reserved;
+};
+
+struct fhci_controller_list {
+ struct list_head ctrl_list; /* control endpoints */
+ struct list_head bulk_list; /* bulk endpoints */
+ struct list_head iso_list; /* isochronous endpoints */
+ struct list_head intr_list; /* interruput endpoints */
+ struct list_head done_list; /* done transfers */
+};
+
+struct virtual_root_hub {
+ int dev_num; /* USB address of the root hub */
+ u32 feature; /* indicates what feature has been set */
+ struct usb_hub_status hub;
+ struct usb_port_status port;
+};
+
+enum fhci_gpios {
+ GPIO_USBOE = 0,
+ GPIO_USBTP,
+ GPIO_USBTN,
+ GPIO_USBRP,
+ GPIO_USBRN,
+ /* these are optional */
+ GPIO_SPEED,
+ GPIO_POWER,
+ NUM_GPIOS,
+};
+
+enum fhci_pins {
+ PIN_USBOE = 0,
+ PIN_USBTP,
+ PIN_USBTN,
+ NUM_PINS,
+};
+
+struct fhci_hcd {
+ enum qe_clock fullspeed_clk;
+ enum qe_clock lowspeed_clk;
+ struct qe_pin *pins[NUM_PINS];
+ int gpios[NUM_GPIOS];
+ bool alow_gpios[NUM_GPIOS];
+
+ struct fhci_regs __iomem *regs; /* I/O memory used to communicate */
+ struct fhci_pram __iomem *pram; /* Parameter RAM */
+ struct gtm_timer *timer;
+
+ spinlock_t lock;
+ struct fhci_usb *usb_lld; /* Low-level driver */
+ struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+ int active_urbs;
+ struct fhci_controller_list *hc_list;
+ struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+ struct list_head empty_eds;
+ struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+ int usb_irq_stat[13];
+ struct dentry *dfs_root;
+ struct dentry *dfs_regs;
+ struct dentry *dfs_irq_stat;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+ FHCI_TA_IN = 0, /* input transaction */
+ FHCI_TA_OUT, /* output transaction */
+ FHCI_TA_SETUP, /* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+ FHCI_TF_CTRL = 0,
+ FHCI_TF_ISO,
+ FHCI_TF_BULK,
+ FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+ FHCI_FULL_SPEED,
+ FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+ FHCI_ED_NEW = 0, /* pipe is new */
+ FHCI_ED_OPER, /* pipe is operating */
+ FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+ FHCI_ED_SKIP, /* skip this pipe */
+ FHCI_ED_HALTED, /* pipe is halted */
+};
+
+enum fhci_port_status {
+ FHCI_PORT_POWER_OFF = 0,
+ FHCI_PORT_DISABLED,
+ FHCI_PORT_DISCONNECTING,
+ FHCI_PORT_WAITING, /* waiting for connection */
+ FHCI_PORT_FULL, /* full speed connected */
+ FHCI_PORT_LOW, /* low speed connected */
+};
+
+enum fhci_mem_alloc {
+ MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */
+ MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */
+ MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */
+ MEM_PRAM = 0x00000008, /* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN 8
+#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS
+
+struct ed {
+ u8 dev_addr; /* device address */
+ u8 ep_addr; /* endpoint address */
+ enum fhci_tf_mode mode; /* USB transfer mode */
+ enum fhci_speed speed;
+ unsigned int max_pkt_size;
+ enum fhci_ed_state state;
+ struct list_head td_list; /* a list of all queued TD to this pipe */
+ struct list_head node;
+
+ /* read only parameters, should be cleared upon initialization */
+ u8 toggle_carry; /* toggle carry from the last TD submitted */
+ u32 last_iso; /* time stamp of last queued ISO transfer */
+ struct td *td_head; /* a pointer to the current TD handled */
+};
+
+struct td {
+ void *data; /* a pointer to the data buffer */
+ unsigned int len; /* length of the data to be submitted */
+ unsigned int actual_len; /* actual bytes transfered on this td */
+ enum fhci_ta_type type; /* transaction type */
+ u8 toggle; /* toggle for next trans. within this TD */
+ u16 iso_index; /* ISO transaction index */
+ u16 start_frame; /* start frame time stamp */
+ u16 interval; /* interval between trans. (for ISO/Intr) */
+ u32 status; /* status of the TD */
+ struct ed *ed; /* a handle to the corresponding ED */
+ struct urb *urb; /* a handle to the corresponding URB */
+ bool ioc; /* Inform On Completion */
+ struct list_head node;
+
+ /* read only parameters should be cleared upon initialization */
+ struct packet *pkt;
+ int nak_cnt;
+ int error_cnt;
+ struct list_head frame_lh;
+};
+
+struct packet {
+ u8 *data; /* packet data */
+ u32 len; /* packet length */
+ u32 status; /* status of the packet - equivalent to the status
+ * field for the corresponding structure td */
+ u32 info; /* packet information */
+ void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS 0
+#define URB_DEL 1
+
+/* URB states (state field) */
+#define US_BULK 0
+#define US_BULK0 1
+
+/* three setup states */
+#define US_CTRL_SETUP 2
+#define US_CTRL_DATA 1
+#define US_CTRL_ACK 0
+
+#define EP_ZERO 0
+
+struct urb_priv {
+ int num_of_tds;
+ int tds_cnt;
+ int state;
+
+ struct td **tds;
+ struct ed *ed;
+ struct timer_list time_out;
+};
+
+struct endpoint {
+ /* Pointer to ep parameter RAM */
+ struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+ /* Host transactions */
+ struct usb_td __iomem *td_base; /* first TD in the ring */
+ struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+ struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+ struct kfifo *empty_frame_Q; /* Empty frames list to use */
+ struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */
+ struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */
+
+ bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED 0x00
+#define FRAME_TIMER_END_TRANSMISSION 0x01
+#define FRAME_DATA_END_TRANSMISSION 0x02
+#define FRAME_END_TRANSMISSION 0x03
+#define FRAME_IS_PREPARED 0x04
+
+struct fhci_time_frame {
+ u16 frame_num; /* frame number */
+ u16 total_bytes; /* total bytes submitted within this frame */
+ u8 frame_status; /* flag that indicates to stop fill this frame */
+ struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+ u16 saved_msk; /* saving of the USB mask register */
+ struct endpoint *ep0; /* pointer for endpoint0 structure */
+ int intr_nesting_cnt; /* interrupt nesting counter */
+ u16 max_frame_usage; /* max frame time usage,in micro-sec */
+ u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+ u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+ struct fhci_time_frame *actual_frame;
+ struct fhci_controller_list *hc_list; /* main structure for hc */
+ struct virtual_root_hub *vroot_hub;
+ enum fhci_port_status port_status; /* v_rh port status */
+
+ u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+ struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+ return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+ dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+ dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+ dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+ dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+ dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+ return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+ return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline struct kfifo *cq_new(int size)
+{
+ return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+ kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+ return __kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+ return __kfifo_put(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+ void *p = NULL;
+
+ __kfifo_get(kfifo, (void *)&p, sizeof(p));
+ return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+ struct urb_priv *urb_priv, struct ed *ed, u16 index,
+ enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+ u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+ enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+ enum fhci_ta_type trans_type, u8 dest_addr,
+ u8 dest_ep, enum fhci_tf_mode trans_mode,
+ enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+ u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+ struct endpoint *ep,
+ enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 65a9609f4ad..5cf5f1eca4f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci)
* to be checked in case boot firmware (BIOS/SMM/...) has set up
* wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
* If the bus glue detected wakeup capability then it should
- * already be enabled. Either way, if wakeup should be enabled
- * but isn't, we'll enable it now.
+ * already be enabled; if so we'll just enable it again.
*/
- if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
- && !device_can_wakeup(hcd->self.controller))
- device_init_wakeup(hcd->self.controller, 1);
+ if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+ device_set_wakeup_capable(hcd->self.controller, 1);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8b28ae7865b..5d625c3fd42 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4e221060f58..944f7e0ca4d 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 189a9db0350..ad4fb15b5dc 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -57,7 +57,6 @@
#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */
#define USB_VENDOR_ID_VERNIER 0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
@@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
- { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index e06810aef2d..4cf27c72423 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,6 +37,7 @@
#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+
#ifdef CONFIG_COMPAT
#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
@@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
}
break;
-#ifdef CONFIG_COMPAT
- case MON_IOCX_GET32: {
- struct mon_bin_get32 getb;
-
- if (copy_from_user(&getb, (void __user *)arg,
- sizeof(struct mon_bin_get32)))
- return -EFAULT;
-
- ret = mon_bin_get_event(file, rp,
- compat_ptr(getb.hdr32), compat_ptr(getb.data32),
- getb.alloc32);
- }
- break;
-#endif
-
case MON_IOCX_MFETCH:
{
struct mon_bin_mfetch mfetch;
@@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
}
break;
+ case MON_IOCG_STATS: {
+ struct mon_bin_stats __user *sp;
+ unsigned int nevents;
+ unsigned int ndropped;
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ ndropped = rp->cnt_lost;
+ rp->cnt_lost = 0;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ nevents = mon_bin_queued(rp);
+
+ sp = (struct mon_bin_stats __user *)arg;
+ if (put_user(rp->cnt_lost, &sp->dropped))
+ return -EFAULT;
+ if (put_user(nevents, &sp->queued))
+ return -EFAULT;
+
+ }
+ break;
+
+ default:
+ return -ENOTTY;
+ }
+
+ return ret;
+}
+
#ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct mon_reader_bin *rp = file->private_data;
+ int ret;
+
+ switch (cmd) {
+
+ case MON_IOCX_GET32: {
+ struct mon_bin_get32 getb;
+
+ if (copy_from_user(&getb, (void __user *)arg,
+ sizeof(struct mon_bin_get32)))
+ return -EFAULT;
+
+ ret = mon_bin_get_event(file, rp,
+ compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+ getb.alloc32);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+
case MON_IOCX_MFETCH32:
{
struct mon_bin_mfetch32 mfetch;
@@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
return ret;
if (put_user(ret, &uptr->nfetch32))
return -EFAULT;
- ret = 0;
}
- break;
-#endif
-
- case MON_IOCG_STATS: {
- struct mon_bin_stats __user *sp;
- unsigned int nevents;
- unsigned int ndropped;
-
- spin_lock_irqsave(&rp->b_lock, flags);
- ndropped = rp->cnt_lost;
- rp->cnt_lost = 0;
- spin_unlock_irqrestore(&rp->b_lock, flags);
- nevents = mon_bin_queued(rp);
+ return 0;
- sp = (struct mon_bin_stats __user *)arg;
- if (put_user(rp->cnt_lost, &sp->dropped))
- return -EFAULT;
- if (put_user(nevents, &sp->queued))
- return -EFAULT;
+ case MON_IOCG_STATS:
+ return mon_bin_ioctl(NULL, file, cmd,
+ (unsigned long) compat_ptr(arg));
- }
- break;
+ case MON_IOCQ_URB_LEN:
+ case MON_IOCQ_RING_SIZE:
+ case MON_IOCT_RING_SIZE:
+ case MON_IOCH_MFLUSH:
+ return mon_bin_ioctl(NULL, file, cmd, arg);
default:
- return -ENOTTY;
+ ;
}
-
- return ret;
+ return -ENOTTY;
}
+#endif /* CONFIG_COMPAT */
static unsigned int
mon_bin_poll(struct file *file, struct poll_table_struct *wait)
@@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = {
/* .write = mon_text_write, */
.poll = mon_bin_poll,
.ioctl = mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = mon_bin_compat_ioctl,
+#endif
.release = mon_bin_release,
.mmap = mon_bin_mmap,
};
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5af7379cd9a..9985db08e7d 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@ config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
select TWL4030_USB if MACH_OMAP_3430SDP
+ select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
Say Y here if your system has a dual role high speed USB
@@ -49,7 +50,7 @@ comment "OMAP 343x high speed USB support"
depends on USB_MUSB_HDRC && ARCH_OMAP34XX
comment "Blackfin high speed USB Support"
- depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+ depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
config USB_TUSB6010
boolean "TUSB 6010 support"
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 5ad6d0893cb..569ef0fed0f 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -9,6 +9,7 @@
#include <linux/usb.h>
#include "musb_core.h"
+#include "musb_debug.h"
#include "cppi_dma.h"
@@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx,
}
}
+#ifdef CONFIG_USB_MUSB_DEBUG
static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
{
pr_debug("RXBD/%s %08x: "
@@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
bd->hw_next, bd->hw_bufp, bd->hw_off_len,
bd->hw_options);
}
+#endif
static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
{
-#if MUSB_DEBUG > 0
+#ifdef CONFIG_USB_MUSB_DEBUG
struct cppi_descriptor *bd;
if (!_dbg_level(level))
@@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
bd->hw_options |= CPPI_SOP_SET;
tail->hw_options |= CPPI_EOP_SET;
- if (debug >= 5) {
+#ifdef CONFIG_USB_MUSB_DEBUG
+ if (_dbg_level(5)) {
struct cppi_descriptor *d;
for (d = rx->head; d; d = d->next)
cppi_dump_rxbd("S", d);
}
+#endif
/* in case the preceding transfer left some state... */
tail = rx->last_processed;
@@ -990,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch,
cppi_ch->offset = 0;
cppi_ch->maxpacket = maxpacket;
cppi_ch->buf_len = len;
+ cppi_ch->channel.actual_len = 0;
/* TX channel? or RX? */
if (cppi_ch->transmit)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 0d566dc5ce0..5a8fd5d57a1 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -32,9 +32,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/arch/hardware.h>
-#include <mach/arch/memory.h>
-#include <mach/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <mach/gpio.h>
+
#include <asm/mach-types.h>
#include "musb_core.h"
@@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
return -EIO;
}
-int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
- /* EVM can't do this (right?) */
- return -EIO;
-}
-
int __init musb_platform_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6c7faacfb53..2cc34fa05b7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb)
musb_gadget_cleanup(musb);
#endif
- if (musb->nIrq >= 0 && musb->irq_wake) {
- disable_irq_wake(musb->nIrq);
+ if (musb->nIrq >= 0) {
+ if (musb->irq_wake)
+ disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
if (is_dma_capable() && musb->dma_controller) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6197daeab8f..4ea30538798 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
status = -EBUSY;
goto fail;
}
- musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ musb_ep->type = usb_endpoint_type(desc);
/* check direction and (later) maxpacket size against endpoint */
- if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+ if (usb_endpoint_num(desc) != epnum)
goto fail;
/* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
* packet size (or fail), set the mode, clear the fifo
*/
musb_ep_select(mbase, epnum);
- if (desc->bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(desc)) {
u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
if (hw_ep->is_shared_fifo)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 99fa6123487..a035ceccf95 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
goto done;
}
- qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ qh->epnum = usb_endpoint_num(epd);
+ qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 52f7f29cebd..7e073a0d7ac 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -15,8 +15,8 @@
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
#include "musb_core.h"
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 8e8dbdb9b39..ee55b449ffd 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -6,14 +6,14 @@
comment "OTG and related infrastructure"
-if USB || USB_GADGET
-
config USB_OTG_UTILS
bool
help
Select this to make sure the build includes objects from
the OTG infrastructure directory.
+if USB || USB_GADGET
+
#
# USB Transceiver Drivers
#
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index cfaf1f08553..027f4b7dde8 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -85,6 +85,8 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c70a8f667d8..75597337583 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -660,6 +660,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+ { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+ { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 373ee09975b..1b62eff475d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -854,6 +854,10 @@
#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+/* Alti-2 products http://www.alti-2.com */
+#define ALTI2_VID 0x1BC9
+#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
@@ -881,6 +885,11 @@
#define RATOC_PRODUCT_ID_USB60F 0xb020
/*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID 0xfb99
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ed183477aa..6c89da9c6fe 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,13 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
#define HUAWEI_PRODUCT_E143E 0x143E
#define HUAWEI_PRODUCT_E143F 0x143F
+#define QUANTA_VENDOR_ID 0x0408
+#define QUANTA_PRODUCT_Q101 0xEA02
+#define QUANTA_PRODUCT_Q111 0xEA03
+#define QUANTA_PRODUCT_GLX 0xEA04
+#define QUANTA_PRODUCT_GKE 0xEA05
+#define QUANTA_PRODUCT_GLE 0xEA06
+
#define NOVATELWIRELESS_VENDOR_ID 0x1410
/* YISO PRODUCTS */
@@ -224,7 +231,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
-#define ONDA_PRODUCT_MT503HS 0x0200
+#define ONDA_PRODUCT_MT503HS 0x2000
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
@@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3cf41df302d..baf591137b8 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] =
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ }
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 7e4752fbf23..b7ea5dbadee 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -27,7 +27,9 @@
/* Vendor and product ids */
#define TI_VENDOR_ID 0x0451
+#define IBM_VENDOR_ID 0x04b3
#define TI_3410_PRODUCT_ID 0x3410
+#define IBM_4543_PRODUCT_ID 0x4543
#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a7f9513fa19..69269f73956 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -995,6 +995,16 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ * "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
+ "RockChip",
+ "MTP",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
* This USB MP3/AVI player device fails and disconnects if more than 128
* sectors (64kB) are read/written in a single command, and may be present
@@ -1251,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+ "Argosy",
+ "Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Flag will support Bulk devices which use a standards-violating 32-byte
* Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1589,6 +1606,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "MD400",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* Reported by Jan Mate <mate@fiit.stuba.sk>
* and by Soeren Sonnenburg <kernel@nn7.de> */
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
@@ -2031,15 +2055,11 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
- * This entry is needed to bypass the ZeroCD mechanism
- * and to properly load as a modem device.
- */
-UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000,
- "Onda ET502HS",
- "USB MMC Storage",
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+ "ST",
+ "2A",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_DEVICE),
+ US_FL_FIX_CAPACITY),
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 85ee9be9361..88079fd6023 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -418,6 +418,8 @@ struct usb_tt;
* @autosuspend_disabled: autosuspend disabled by the user
* @autoresume_disabled: autoresume disabled by the user
* @skip_sys_resume: skip the next system resume
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ * specific data for the device.
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use