aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-01-30 08:29:05 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-01-30 08:29:05 -0800
commitc9cc8e771cb62e495765793e4b7d06016ae1b525 (patch)
tree42c3ae364cd8b22e3263403f0baa2b5e8070b5da
parent59df3230fc57fa8900bebf3d2d68221d549f3c7c (diff)
parentb9d1902cd281d9b829fb3d6ee9148d28c8c63382 (diff)
downloadlinux-2.6.34-ux500-c9cc8e771cb62e495765793e4b7d06016ae1b525.tar.gz
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4117/1: S3C2412: Fix writel() usage in selection code [ARM] 4111/1: Allow VFP to work with thread migration on SMP [ARM] 4112/1: Only ioremap to supersections if DOMAIN_IO is zero [ARM] 4106/1: S3C2410: typo fixes in register definitions [ARM] 4102/1: Allow for PHYS_OFFSET on any valid 2MiB address [ARM] Fix AMBA serial drivers for non-first serial ports [ARM] 4100/1: iop3xx: fix cpu mask for iop333 [ARM] Update mach-types [ARM] Fix show_mem() for discontigmem [ARM] 4096/1: S3C24XX: change return code form s3c2410_gpio_getcfg() [ARM] 4095/1: S3C24XX: Fix GPIO set for Bank A [ARM] 4092/1: i.MX/MX1 CPU Frequency scaling latency definition [ARM] 4089/1: AT91: GPIO wake IRQ cleanup [ARM] 4088/1: AT91: Unbalanced IRQ in serial driver suspend/resume [ARM] 4087/1: AT91: CPU reset for SAM9x processors [ARM] 4086/1: AT91: Whitespace cleanup [ARM] 4085/1: AT91: Header fixes. [ARM] 4084/1: Remove CONFIG_DEBUG_WAITQ
-rw-r--r--arch/arm/configs/at91sam9260ek_defconfig1
-rw-r--r--arch/arm/configs/at91sam9261ek_defconfig1
-rw-r--r--arch/arm/kernel/head.S7
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200_devices.c2
-rw-r--r--arch/arm/mach-at91rm9200/at91sam9260.c3
-rw-r--r--arch/arm/mach-at91rm9200/at91sam9261.c3
-rw-r--r--arch/arm/mach-at91rm9200/gpio.c39
-rw-r--r--arch/arm/mach-imx/cpufreq.c14
-rw-r--r--arch/arm/mach-s3c2410/gpio.c12
-rw-r--r--arch/arm/mach-s3c2410/pm.c7
-rw-r--r--arch/arm/mach-s3c2410/s3c2412-dma.c4
-rw-r--r--arch/arm/mm/init.c11
-rw-r--r--arch/arm/mm/ioremap.c3
-rw-r--r--arch/arm/mm/proc-xscale.S2
-rw-r--r--arch/arm/tools/mach-types25
-rw-r--r--arch/arm/vfp/entry.S1
-rw-r--r--arch/arm/vfp/vfp.h4
-rw-r--r--arch/arm/vfp/vfphw.S26
-rw-r--r--arch/arm/vfp/vfpmodule.c30
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c2
-rw-r--r--drivers/serial/atmel_serial.c7
-rw-r--r--drivers/serial/atmel_serial.h2
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_ecc.h8
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_pmc.h2
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_rstc.h2
-rw-r--r--include/asm-arm/arch-at91rm9200/at91_rtc.h16
-rw-r--r--include/asm-arm/arch-at91rm9200/at91rm9200.h2
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h2
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h6
-rw-r--r--include/asm-arm/arch-at91rm9200/at91sam926x_mc.h16
-rw-r--r--include/asm-arm/arch-s3c2410/regs-gpio.h4
-rw-r--r--include/asm-arm/arch-s3c2410/regs-mem.h14
-rw-r--r--include/asm-arm/fpstate.h3
34 files changed, 187 insertions, 96 deletions
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 79049206dfa..46b0c734aeb 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -923,7 +923,6 @@ CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 784ad7c0186..fcd8fa091e9 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1079,7 +1079,6 @@ CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index d994561816a..cf495a3084b 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -22,6 +22,10 @@
#include <asm/thread_info.h>
#include <asm/system.h>
+#if (PHYS_OFFSET & 0x001fffff)
+#error "PHYS_OFFSET must be at an even 2MiB boundary!"
+#endif
+
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
@@ -251,7 +255,8 @@ __create_page_tables:
* Then map first 1MB of ram in case it contains our boot params.
*/
add r0, r4, #PAGE_OFFSET >> 18
- orr r6, r7, #PHYS_OFFSET
+ orr r6, r7, #(PHYS_OFFSET & 0xff000000)
+ orr r6, r6, #(PHYS_OFFSET & 0x00e00000)
str r6, [r0]
#ifdef CONFIG_XIP_KERNEL
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
index 4641b99db0e..57fac7203fe 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
@@ -272,7 +272,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
/* nWAIT is _not_ a default setting */
- at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
+ at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
cf_data = *data;
platform_device_register(&at91rm9200_cf_device);
diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c
index 203f073a53e..b14871adc30 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260.c
+++ b/arch/arm/mach-at91rm9200/at91sam9260.c
@@ -16,6 +16,7 @@
#include <asm/mach/map.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
#include "generic.h"
#include "clock.h"
@@ -212,7 +213,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
static void at91sam9260_reset(void)
{
-#warning "Implement CPU reset"
+ at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c
index 5a82f35da2e..d242bb885c6 100644
--- a/arch/arm/mach-at91rm9200/at91sam9261.c
+++ b/arch/arm/mach-at91rm9200/at91sam9261.c
@@ -16,6 +16,7 @@
#include <asm/mach/map.h>
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
#include "generic.h"
#include "clock.h"
@@ -207,7 +208,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
static void at91sam9261_reset(void)
{
-#warning "Implement CPU reset"
+ at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 3f188508c39..af22659c8a2 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -20,7 +20,6 @@
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
#include "generic.h"
@@ -224,17 +223,17 @@ static u32 backups[MAX_GPIO_BANKS];
static int gpio_irq_set_wake(unsigned pin, unsigned state)
{
unsigned mask = pin_to_mask(pin);
+ unsigned bank = (pin - PIN_BASE) / 32;
- pin -= PIN_BASE;
- pin /= 32;
-
- if (unlikely(pin >= MAX_GPIO_BANKS))
+ if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
if (state)
- wakeups[pin] |= mask;
+ wakeups[bank] |= mask;
else
- wakeups[pin] &= ~mask;
+ wakeups[bank] &= ~mask;
+
+ set_irq_wake(gpio[bank].id, state);
return 0;
}
@@ -246,29 +245,15 @@ void at91_gpio_suspend(void)
for (i = 0; i < gpio_banks; i++) {
u32 pio = gpio[i].offset;
- /*
- * Note: drivers should have disabled GPIO interrupts that
- * aren't supposed to be wakeup sources.
- * But that is not much good on ARM..... disable_irq() does
- * not update the hardware immediately, so the hardware mask
- * (IMR) has the wrong value (not current, too much is
- * permitted).
- *
- * Our workaround is to disable all non-wakeup IRQs ...
- * which is exactly what correct drivers asked for in the
- * first place!
- */
backups[i] = at91_sys_read(pio + PIO_IMR);
at91_sys_write(pio + PIO_IDR, backups[i]);
at91_sys_write(pio + PIO_IER, wakeups[i]);
- if (!wakeups[i]) {
- disable_irq_wake(gpio[i].id);
- at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id);
- } else {
- enable_irq_wake(gpio[i].id);
+ if (!wakeups[i])
+ clk_disable(gpio[i].clock);
+ else {
#ifdef CONFIG_PM_DEBUG
- printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
#endif
}
}
@@ -281,9 +266,11 @@ void at91_gpio_resume(void)
for (i = 0; i < gpio_banks; i++) {
u32 pio = gpio[i].offset;
+ if (!wakeups[i])
+ clk_enable(gpio[i].clock);
+
at91_sys_write(pio + PIO_IDR, wakeups[i]);
at91_sys_write(pio + PIO_IER, backups[i]);
- at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id);
}
}
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index ac5f9989566..4f66e90db74 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -184,6 +184,17 @@ static int imx_set_target(struct cpufreq_policy *policy,
long sysclk;
unsigned int bclk_div = 1;
+ /*
+ * Some governors do not respects CPU and policy lower limits
+ * which leads to bad things (division by zero etc), ensure
+ * that such things do not happen.
+ */
+ if(target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+
+ if(target_freq < policy->min)
+ target_freq = policy->min;
+
freq = target_freq * 1000;
pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
@@ -258,7 +269,8 @@ static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = 8000;
policy->cpuinfo.max_freq = 200000;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /* Manual states, that PLL stabilizes in two CLK32 periods */
+ policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
return 0;
}
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index ba346546150..f6fb215bb48 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -57,6 +57,7 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
case S3C2410_GPIO_SFN2:
case S3C2410_GPIO_SFN3:
if (pin < S3C2410_GPIO_BANKB) {
+ function -= 1;
function &= 1;
function <<= S3C2410_GPIO_OFFSET(pin);
} else {
@@ -83,15 +84,18 @@ EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
unsigned int s3c2410_gpio_getcfg(unsigned int pin)
{
void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long mask;
+ unsigned long val = __raw_readl(base);
if (pin < S3C2410_GPIO_BANKB) {
- mask = 1 << S3C2410_GPIO_OFFSET(pin);
+ val >>= S3C2410_GPIO_OFFSET(pin);
+ val &= 1;
+ val += 1;
} else {
- mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+ val >>= S3C2410_GPIO_OFFSET(pin)*2;
+ val &= 3;
}
- return __raw_readl(base) & mask;
+ return val | S3C2410_GPIO_INPUT;
}
EXPORT_SYMBOL(s3c2410_gpio_getcfg);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 00834097eb8..ebf294dd31d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -451,15 +451,14 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
pinstate = s3c2410_gpio_getcfg(pin);
- pinstate >>= S3C2410_GPIO_OFFSET(pin)*2;
if (!irqstate) {
- if (pinstate == 0x02)
+ if (pinstate == S3C2410_GPIO_IRQ)
DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
} else {
- if (pinstate == 0x02) {
+ if (pinstate == S3C2410_GPIO_IRQ) {
DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
- s3c2410_gpio_cfgpin(pin, 0x00);
+ s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
}
}
}
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
index fe71a8fdb87..138f726ac6b 100644
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2412-dma.c
@@ -133,8 +133,8 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map)
{
- writel(chan->regs + S3C2412_DMA_DMAREQSEL,
- map->channels[0] | S3C2412_DMAREQSEL_HW);
+ writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
+ chan->regs + S3C2412_DMA_DMAREQSEL);
}
static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b5814b4b6f3..7760193e74c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -52,15 +52,18 @@ void show_mem(void)
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_node(node) {
+ pg_data_t *n = NODE_DATA(node);
+ struct page *map = n->node_mem_map - n->node_start_pfn;
+
for_each_nodebank (i,mi,node) {
unsigned int pfn1, pfn2;
struct page *page, *end;
- pfn1 = mi->bank[i].start >> PAGE_SHIFT;
- pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT;
+ pfn1 = __phys_to_pfn(mi->bank[i].start);
+ pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start);
- page = NODE_MEM_MAP(node) + pfn1;
- end = NODE_MEM_MAP(node) + pfn2;
+ page = map + pfn1;
+ end = map + pfn2;
do {
total++;
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 251685fe73a..0ac615c0f79 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -300,7 +300,8 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
addr = (unsigned long)area->addr;
#ifndef CONFIG_SMP
- if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
+ if (DOMAIN_IO == 0 &&
+ (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
cpu_is_xsc3()) &&
!((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
area->flags |= VM_ARM_SECTION_MAPPING;
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 490e11b3423..d29fe927ee9 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -708,7 +708,7 @@ __8032x_proc_info:
.type __8033x_proc_info,#object
__8033x_proc_info:
.long 0x69054010
- .long 0xffffff30
+ .long 0xfffffd30
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8bcb838e544..bd78058b717 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Dec 7 17:19:20 2006
+# Last update: Tue Jan 16 16:52:56 2007
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1219,3 +1219,26 @@ zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
hitrack MACH_HITRACK HITRACK 1208
syme1 MACH_SYME1 SYME1 1209
syhl1 MACH_SYHL1 SYHL1 1210
+empca400 MACH_EMPCA400 EMPCA400 1211
+em7210 MACH_EM7210 EM7210 1212
+htchermes MACH_HTCHERMES HTCHERMES 1213
+eti_c1 MACH_ETI_C1 ETI_C1 1214
+mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215
+ac100 MACH_AC100 AC100 1216
+sneetch MACH_SNEETCH SNEETCH 1217
+studentmate MACH_STUDENTMATE STUDENTMATE 1218
+zir2410 MACH_ZIR2410 ZIR2410 1219
+zir2413 MACH_ZIR2413 ZIR2413 1220
+dlonip3 MACH_DLONIP3 DLONIP3 1221
+instream MACH_INSTREAM INSTREAM 1222
+ambarella MACH_AMBARELLA AMBARELLA 1223
+nevis MACH_NEVIS NEVIS 1224
+htc_trinity MACH_HTC_TRINITY HTC_TRINITY 1225
+ql202b MACH_QL202B QL202B 1226
+vpac270 MACH_VPAC270 VPAC270 1227
+rd129 MACH_RD129 RD129 1228
+htcwizard MACH_HTCWIZARD HTCWIZARD 1229
+xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
+tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
+zylonite MACH_ZYLONITE ZYLONITE 1233
+gene1270 MACH_GENE1270 GENE1270 1234
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 7b595547c1c..ca2a5ad19ea 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -25,6 +25,7 @@
do_vfp:
enable_irq
ldr r4, .LCvfp
+ ldr r11, [r10, #TI_CPU] @ CPU number
add r10, r10, #TI_VFPSTATE @ r10 = workspace
ldr pc, [r4] @ call VFP entry point
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index f2797896e6d..54a2ad6d9ca 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -370,3 +370,7 @@ struct op {
u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
u32 flags;
};
+
+#ifdef CONFIG_SMP
+extern void vfp_save_state(void *location, u32 fpexc);
+#endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index e51e6679c40..d4b7b229631 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -65,6 +65,7 @@
@ r2 = faulted PC+4
@ r9 = successful return
@ r10 = vfp_state union
+@ r11 = CPU number
@ lr = failure return
.globl vfp_support_entry
@@ -79,7 +80,7 @@ vfp_support_entry:
DBGSTR1 "enable %x", r10
ldr r3, last_VFP_context_address
orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set
- ldr r4, [r3] @ last_VFP_context pointer
+ ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer
bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled
cmp r4, r10
beq check_for_exception @ we are returning to the same
@@ -91,7 +92,9 @@ vfp_support_entry:
@ exceptions, so we can get at the
@ rest of it
+#ifndef CONFIG_SMP
@ Save out the current registers to the old thread state
+ @ No need for SMP since this is not done lazily
DBGSTR1 "save old state %p", r4
cmp r4, #0
@@ -105,10 +108,11 @@ vfp_support_entry:
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
+#endif
no_old_VFP_process:
DBGSTR1 "load state %p", r10
- str r10, [r3] @ update the last_VFP_context pointer
+ str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
@ Load the saved state back into the VFP
VFPFLDMIA r10 @ reload the working registers while
@ FPEXC is in a safe state
@@ -162,6 +166,24 @@ process_exception:
@ required. If not, the user code will
@ retry the faulted instruction
+#ifdef CONFIG_SMP
+ .globl vfp_save_state
+ .type vfp_save_state, %function
+vfp_save_state:
+ @ Save the current VFP state
+ @ r0 - save location
+ @ r1 - FPEXC
+ DBGSTR1 "save VFP state %p", r0
+ VFPFMRX r2, FPSCR @ current status
+ VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards)
+ tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
+ VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading
+ @ nonexistant reg on rev0
+ VFPFSTMIA r0 @ save the working registers
+ stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
+ mov pc, lr
+#endif
+
last_VFP_context_address:
.word last_VFP_context
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 490d9d18a7d..f1e5951dc72 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -28,7 +28,7 @@ void vfp_testing_entry(void);
void vfp_support_entry(void);
void (*vfp_vector)(void) = vfp_testing_entry;
-union vfp_state *last_VFP_context;
+union vfp_state *last_VFP_context[NR_CPUS];
/*
* Dual-use variable.
@@ -41,13 +41,35 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
struct thread_info *thread = v;
union vfp_state *vfp;
+ __u32 cpu = thread->cpu;
if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
+ u32 fpexc = fmrx(FPEXC);
+
+#ifdef CONFIG_SMP
+ /*
+ * On SMP, if VFP is enabled, save the old state in
+ * case the thread migrates to a different CPU. The
+ * restoring is done lazily.
+ */
+ if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) {
+ vfp_save_state(last_VFP_context[cpu], fpexc);
+ last_VFP_context[cpu]->hard.cpu = cpu;
+ }
+ /*
+ * Thread migration, just force the reloading of the
+ * state on the new CPU in case the VFP registers
+ * contain stale data.
+ */
+ if (thread->vfpstate.hard.cpu != cpu)
+ last_VFP_context[cpu] = NULL;
+#endif
+
/*
* Always disable VFP so we can lazily save/restore the
* old state.
*/
- fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
+ fmxr(FPEXC, fpexc & ~FPEXC_ENABLE);
return NOTIFY_DONE;
}
@@ -68,8 +90,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
}
/* flush and release case: Per-thread VFP cleanup. */
- if (last_VFP_context == vfp)
- last_VFP_context = NULL;
+ if (last_VFP_context[cpu] == vfp)
+ last_VFP_context[cpu] = NULL;
return NOTIFY_DONE;
}
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 61db6973755..f69bd097166 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -589,6 +589,8 @@ static int __init pl010_console_setup(struct console *co, char *options)
*/
if (co->index >= UART_NR)
co->index = 0;
+ if (!amba_ports[co->index])
+ return -ENODEV;
port = &amba_ports[co->index]->port;
if (options)
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 9a3b374b2a0..44639e71372 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -661,6 +661,8 @@ static int __init pl011_console_setup(struct console *co, char *options)
if (co->index >= UART_NR)
co->index = 0;
uap = amba_ports[co->index];
+ if (!uap)
+ return -ENODEV;
uap->port.uartclk = clk_get_rate(uap->clk);
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index ed7f7209ea5..881f886b91c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -689,9 +689,9 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
struct atmel_uart_data *data = pdev->dev.platform_data;
port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
+ port->flags = UPF_BOOT_AUTOCONF;
port->ops = &atmel_pops;
- port->fifosize = 1;
+ port->fifosize = 1;
port->line = pdev->id;
port->dev = &pdev->dev;
@@ -890,7 +890,6 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state
if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
enable_irq_wake(port->irq);
else {
- disable_irq_wake(port->irq);
uart_suspend_port(&atmel_uart, port);
atmel_port->suspended = 1;
}
@@ -907,6 +906,8 @@ static int atmel_serial_resume(struct platform_device *pdev)
uart_resume_port(&atmel_uart, port);
atmel_port->suspended = 0;
}
+ else
+ disable_irq_wake(port->irq);
return 0;
}
diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
index fe1763b2a6d..11b44360e10 100644
--- a/drivers/serial/atmel_serial.h
+++ b/drivers/serial/atmel_serial.h
@@ -106,7 +106,7 @@
#define ATMEL_US_CSR 0x14 /* Channel Status Register */
#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
-#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */
+#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h
index fddf256a98d..5c564ede5c5 100644
--- a/include/asm-arm/arch-at91rm9200/at91_ecc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h
@@ -14,7 +14,7 @@
#define AT91_ECC_H
#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
-#define AT91_ECC_RST (1 << 0) /* Reset parity */
+#define AT91_ECC_RST (1 << 0) /* Reset parity */
#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
@@ -23,16 +23,16 @@
#define AT91_ECC_PAGESIZE_2112 (2)
#define AT91_ECC_PAGESIZE_4224 (3)
-#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
+#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
-#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
+#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
-#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
+#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h
index de8c3da74a0..c3b489d09b6 100644
--- a/include/asm-arm/arch-at91rm9200/at91_pmc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h
@@ -61,7 +61,7 @@
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
+#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
#define AT91_PMC_PRES_4 (2 << 2)
#define AT91_PMC_PRES_8 (3 << 2)
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h
index ccdc52da973..237d3c40b31 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rstc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h
@@ -17,7 +17,7 @@
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */
+#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h
index 6e5065d5626..095fe088310 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rtc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h
@@ -21,21 +21,21 @@
#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
-#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
-#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
-#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
+#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
+#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
+#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
-#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
-#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
-#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
+#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
+#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
+#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
-#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
+#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
-#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
+#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
index 4d51177efdd..c569b6a21a4 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h
@@ -274,7 +274,7 @@
#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
-#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
+#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
index 746d973705b..78f6b4917b8 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
@@ -58,7 +58,7 @@
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
index 270a5dcdf1c..ec88efabbe6 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
@@ -15,7 +15,7 @@
#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
@@ -43,8 +43,8 @@
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
index 7d94968b5d5..972e7531c7f 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
@@ -33,14 +33,14 @@
#define AT91_SDRAMC_NC_9 (1 << 0)
#define AT91_SDRAMC_NC_10 (2 << 0)
#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
#define AT91_SDRAMC_NR_11 (0 << 2)
#define AT91_SDRAMC_NR_12 (1 << 2)
#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
#define AT91_SDRAMC_CAS_1 (1 << 5)
#define AT91_SDRAMC_CAS_2 (2 << 5)
#define AT91_SDRAMC_CAS_3 (3 << 5)
@@ -110,10 +110,10 @@
#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 5)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 5)
-#define AT91_SMC_EXNWMODE_READY (3 << 5)
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
#define AT91_SMC_BAT_SELECT (0 << 8)
#define AT91_SMC_BAT_WRITE (1 << 8)
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index b2893e32a23..eae91694edc 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -52,10 +52,10 @@
/* general configuration options */
#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT (0xFFFFFFF0)
+#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
-#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */
+#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
/* register address for the GPIO registers.
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
index 375dca50364..e4d82341f7b 100644
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ b/include/asm-arm/arch-s3c2410/regs-mem.h
@@ -133,10 +133,10 @@
#define S3C2410_BANKCON_SDRAM (0x3 << 15)
/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trdc1 (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trdc2 (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trdc3 (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trdc4 (0x03 << 4)
+#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
/* CAS pulse width */
#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
@@ -153,9 +153,9 @@
#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trdc2 (0x00 << 2)
-#define S3C2410_BANKCON_Trdc3 (0x01 << 2)
-#define S3C2410_BANKCON_Trdc4 (0x02 << 2)
+#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
+#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
+#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
/* control column address select */
#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h
index 6af4e6bd129..f31cda5a55e 100644
--- a/include/asm-arm/fpstate.h
+++ b/include/asm-arm/fpstate.h
@@ -35,6 +35,9 @@ struct vfp_hard_struct {
*/
__u32 fpinst;
__u32 fpinst2;
+#ifdef CONFIG_SMP
+ __u32 cpu;
+#endif
};
union vfp_state {