From 2e3646e51b2d6415549b310655df63e7e0d7a080 Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Thu, 8 Jun 2006 22:12:42 -0700 Subject: kconfig: integrate split config into silentoldconfig Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/basic/Makefile | 6 +- scripts/basic/split-include.c | 226 ------------------------------------------ 2 files changed, 2 insertions(+), 230 deletions(-) delete mode 100644 scripts/basic/split-include.c (limited to 'scripts/basic') diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile index f22e94c3a2d..2f60070f973 100644 --- a/scripts/basic/Makefile +++ b/scripts/basic/Makefile @@ -1,17 +1,15 @@ ### # Makefile.basic list the most basic programs used during the build process. # The programs listed herein is what is needed to do the basic stuff, -# such as splitting .config and fix dependency file. +# such as fix dependency file. # This initial step is needed to avoid files to be recompiled # when kernel configuration changes (which is what happens when # .config is included by main Makefile. # --------------------------------------------------------------------------- # fixdep: Used to generate dependency information during build process -# split-include: Divide all config symbols up in a number of files in -# include/config/... # docproc: Used in Documentation/docbook -hostprogs-y := fixdep split-include docproc +hostprogs-y := fixdep docproc always := $(hostprogs-y) # fixdep is needed to compile other host programs diff --git a/scripts/basic/split-include.c b/scripts/basic/split-include.c deleted file mode 100644 index 459c45276cb..00000000000 --- a/scripts/basic/split-include.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * split-include.c - * - * Copyright abandoned, Michael Chastain, . - * This is a C version of syncdep.pl by Werner Almesberger. - * - * This program takes autoconf.h as input and outputs a directory full - * of one-line include files, merging onto the old values. - * - * Think of the configuration options as key-value pairs. Then there - * are five cases: - * - * key old value new value action - * - * KEY-1 VALUE-1 VALUE-1 leave file alone - * KEY-2 VALUE-2A VALUE-2B write VALUE-2B into file - * KEY-3 - VALUE-3 write VALUE-3 into file - * KEY-4 VALUE-4 - write an empty file - * KEY-5 (empty) - leave old empty file alone - */ - -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#define ERROR_EXIT(strExit) \ - { \ - const int errnoSave = errno; \ - fprintf(stderr, "%s: ", str_my_name); \ - errno = errnoSave; \ - perror((strExit)); \ - exit(1); \ - } - - - -int main(int argc, const char * argv []) -{ - const char * str_my_name; - const char * str_file_autoconf; - const char * str_dir_config; - - FILE * fp_config; - FILE * fp_target; - FILE * fp_find; - - int buffer_size; - - char * line; - char * old_line; - char * list_target; - char * ptarget; - - struct stat stat_buf; - - /* Check arg count. */ - if (argc != 3) - { - fprintf(stderr, "%s: wrong number of arguments.\n", argv[0]); - exit(1); - } - - str_my_name = argv[0]; - str_file_autoconf = argv[1]; - str_dir_config = argv[2]; - - /* Find a buffer size. */ - if (stat(str_file_autoconf, &stat_buf) != 0) - ERROR_EXIT(str_file_autoconf); - buffer_size = 2 * stat_buf.st_size + 4096; - - /* Allocate buffers. */ - if ( (line = malloc(buffer_size)) == NULL - || (old_line = malloc(buffer_size)) == NULL - || (list_target = malloc(buffer_size)) == NULL ) - ERROR_EXIT(str_file_autoconf); - - /* Open autoconfig file. */ - if ((fp_config = fopen(str_file_autoconf, "r")) == NULL) - ERROR_EXIT(str_file_autoconf); - - /* Make output directory if needed. */ - if (stat(str_dir_config, &stat_buf) != 0) - { - if (mkdir(str_dir_config, 0755) != 0) - ERROR_EXIT(str_dir_config); - } - - /* Change to output directory. */ - if (chdir(str_dir_config) != 0) - ERROR_EXIT(str_dir_config); - - /* Put initial separator into target list. */ - ptarget = list_target; - *ptarget++ = '\n'; - - /* Read config lines. */ - while (fgets(line, buffer_size, fp_config)) - { - const char * str_config; - int is_same; - int itarget; - - if (line[0] != '#') - continue; - if ((str_config = strstr(line, "CONFIG_")) == NULL) - continue; - - /* Make the output file name. */ - str_config += sizeof("CONFIG_") - 1; - for (itarget = 0; !isspace(str_config[itarget]); itarget++) - { - int c = (unsigned char) str_config[itarget]; - if (isupper(c)) c = tolower(c); - if (c == '_') c = '/'; - ptarget[itarget] = c; - } - ptarget[itarget++] = '.'; - ptarget[itarget++] = 'h'; - ptarget[itarget++] = '\0'; - - /* Check for existing file. */ - is_same = 0; - if ((fp_target = fopen(ptarget, "r")) != NULL) - { - fgets(old_line, buffer_size, fp_target); - if (fclose(fp_target) != 0) - ERROR_EXIT(ptarget); - if (!strcmp(line, old_line)) - is_same = 1; - } - - if (!is_same) - { - /* Auto-create directories. */ - int islash; - for (islash = 0; islash < itarget; islash++) - { - if (ptarget[islash] == '/') - { - ptarget[islash] = '\0'; - if (stat(ptarget, &stat_buf) != 0 - && mkdir(ptarget, 0755) != 0) - ERROR_EXIT( ptarget ); - ptarget[islash] = '/'; - } - } - - /* Write the file. */ - if ((fp_target = fopen(ptarget, "w" )) == NULL) - ERROR_EXIT(ptarget); - fputs(line, fp_target); - if (ferror(fp_target) || fclose(fp_target) != 0) - ERROR_EXIT(ptarget); - } - - /* Update target list */ - ptarget += itarget; - *(ptarget-1) = '\n'; - } - - /* - * Close autoconfig file. - * Terminate the target list. - */ - if (fclose(fp_config) != 0) - ERROR_EXIT(str_file_autoconf); - *ptarget = '\0'; - - /* - * Fix up existing files which have no new value. - * This is Case 4 and Case 5. - * - * I re-read the tree and filter it against list_target. - * This is crude. But it avoids data copies. Also, list_target - * is compact and contiguous, so it easily fits into cache. - * - * Notice that list_target contains strings separated by \n, - * with a \n before the first string and after the last. - * fgets gives the incoming names a terminating \n. - * So by having an initial \n, strstr will find exact matches. - */ - - fp_find = popen("find * -type f -name \"*.h\" -print", "r"); - if (fp_find == 0) - ERROR_EXIT( "find" ); - - line[0] = '\n'; - while (fgets(line+1, buffer_size, fp_find)) - { - if (strstr(list_target, line) == NULL) - { - /* - * This is an old file with no CONFIG_* flag in autoconf.h. - */ - - /* First strip the \n. */ - line[strlen(line)-1] = '\0'; - - /* Grab size. */ - if (stat(line+1, &stat_buf) != 0) - ERROR_EXIT(line); - - /* If file is not empty, make it empty and give it a fresh date. */ - if (stat_buf.st_size != 0) - { - if ((fp_target = fopen(line+1, "w")) == NULL) - ERROR_EXIT(line); - if (fclose(fp_target) != 0) - ERROR_EXIT(line); - } - } - } - - if (pclose(fp_find) != 0) - ERROR_EXIT("find"); - - return 0; -} -- cgit v1.2.3