aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-07-12Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
2010-07-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Send Report ID when numbered reports are sent over the control endpoint. HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor HID: add support for CH Eclipse yoke HID: eliminate a double lock in debug code HID: ntrig: add support for new firwmare versions HID: check for HID_QUIRK_IGNORE during probing HID: roccat: fix modules interdependencies
2010-07-11HID: Send Report ID when numbered reports are sent over the control endpoint.Alan Ott
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host driversLaurent Pinchart
The UVC gadget driver borrowed code from the UVC host driver without changing the symbol names. This results in a namespace clash with multiple definitions of several symbols when compiling both drivers in the kernel. Make all generic UVC functions and variables static in the UVC gadget driver, as the symbols are not referenced outside of the gadget driver. Rename the uvc_trace_param global variable to uvc_gadget_trace_param. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix autoloading of fschmd on recent Fujitsu machines hwmon: (coretemp) Properly label the sensors hwmon: (coretemp) Skip duplicate CPU entries hwmon: (it87) Fix in7 on IT8720F hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
2010-07-11Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
2010-07-11HID: Enable HID_QUIRK_MULTI_INPUT for Retro AdaptorPeter Edwards
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by: Peter Edwards <samwise@bagshot-row.org> Acked-by: Paul Qureshi <retro@world3.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: add support for CH Eclipse yokeJonathan Rockway
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by: Jonathan Rockway <jon@jrock.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-10i2c/mips: Fix error return codes from Sibyte i2c bus driverGuenter Roeck
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-10i2c: Fix probability checkJean Delvare
The new unified probing function differs from the original code, and the preliminary test whether probing is possible must be updated accordingly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09hwmon: Fix autoloading of fschmd on recent Fujitsu machinesJean Delvare
Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sergey Spiridonov <sena@hurd.homeunix.org> Cc: Hans de Goede <hdegoede@redhat.com>
2010-07-09hwmon: (coretemp) Properly label the sensorsJean Delvare
Don't assume that CPU entry number and core ID always match. It worked in the simple cases (single CPU, no HT) but fails on multi-CPU systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (coretemp) Skip duplicate CPU entriesJean Delvare
On hyper-threaded CPUs, each core appears twice in the CPU list. Skip the second entry to avoid duplicate sensors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (it87) Fix in7 on IT8720FJean Delvare
The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org> Cc: stable@kernel.org
2010-07-09hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisionsAndreas Herrmann
Reported temperature for ASB1 CPUs is too high. Add ASB1 CPU revisions (these are also non-desktop variants) to the list of CPUs for which the temperature fixup is not required. Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle) Current kernel reports $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +74.0 C Core0 Temp: +70.0 C Core1 Temp: +69.0 C Core1 Temp: +70.0 C With this patch I have $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +54.0 C Core0 Temp: +51.0 C Core1 Temp: +48.0 C Core1 Temp: +49.0 C Cc: stable@kernel.org [.32.x .33.x, .34.x] Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-08IB/qib: Use request_firmware() to load SD7220 firmwareBen Hutchings
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-08V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereferencePawel Osciak
Calling g_fmt before s_fmt resulted in a NULL pointer dereference as no default formats were being selected on probe. Reported-by: Németh Márton <nm127@freemail.hu> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RESLaurent Pinchart
Issuing a GET_MIN request on the power line frequency control times out on at least the Apple iSight. As the UVC specification doesn't list GET_MIN/MAX/RES as supported on that control, remove them from the uvc_ctrls array. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank ↵Ian Armstrong
screen Add a short delay when stopping the decoder, allowing it to settle and preventing some unexpected interaction with other firmware commands. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Tested-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tunerAndy Walls
Hauppauge EEPROM tuner code 168 has recently shown up on HVR-1600 TV capture cards supported by the cx18 driver. This change allows analog tuner type autodetection to succeed for these cards. Information for decoding tuner code 168 was provided by Hauppauge. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tunerAndy Walls
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargsVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contigVaibhav Hiremath
Actually OMAP doesn't support scatter-gather DMA for Display subsystem but due to legacy coding it has been overlooked till now. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changesVaibhav Hiremath
Changes - - Kconfig option dependancy changed to ARCH_OMAP2/3 from ARCH_OMAP24XX/34XX - There are some moments of function from omap_dss_device to omap_dss_driver. Incorporated changes for the same. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix world-writable child interface control sysfs attributes IB/qib: Clean up properly if qib_init() fails IB/qib: Completion queue callback needs to be single threaded IB/qib: Update 7322 serdes tables IB/qib: Clear 6120 hardware error register IB/qib: Clear eager buffer memory for each new process IB/qib: Mask hardware error during link reset IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problem RDMA/cxgb4: Derive smac_idx from port viid RDMA/cxgb4: Avoid false GTS CIDX_INC overflows RDMA/cxgb4: Don't call abort_connection() for active connect failures RDMA/cxgb4: Use the DMA state API instead of the pci equivalents
2010-07-08Merge branches 'cxgb4', 'ipoib' and 'qib' into for-nextRoland Dreier
2010-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (35 commits) NET: SB1250: Initialize .owner vxge: show startup message with KERN_INFO ll_temac: Fix missing iounmaps bridge: Clear IPCB before possible entry into IP stack bridge br_multicast: BUG: unable to handle kernel NULL pointer dereference net: Fix definition of netif_vdbg() when VERBOSE_DEBUG is defined net/ne: fix memory leak in ne_drv_probe() xfrm: fix xfrm by MARK logic virtio_net: fix oom handling on tx virtio_net: do not reschedule rx refill forever s2io: resolve statistics issues linux/net.h: fix kernel-doc warnings net: decreasing real_num_tx_queues needs to flush qdisc sched: qdisc_reset_all_tx is calling qdisc_reset without qdisc_lock qlge: fix a eeh handler to not add a pending timer qlge: Replacing add_timer() to mod_timer() usbnet: Set parent device early for netdev_printk() net: Revert "rndis_host: Poll status channel before control channel" netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT drivers: bluetooth: bluecard_cs.c: Fixed include error, changed to linux/io.h ...
2010-07-07NET: SB1250: Initialize .ownerRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/sb1250-mac.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07vxge: show startup message with KERN_INFOWu Fengguang
The original KERN_CRIT will mess up terminals. CC: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07ll_temac: Fix missing iounmapsDenis Kirjanov
Fix missing iounmaps. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: correctly update connector DPMS status in drm_fb_helper drm/radeon/kms: fix shared ddc handling drm/ttm: Allocate the page pool manager in the heap.
2010-07-07drm: correctly update connector DPMS status in drm_fb_helperJesse Barnes
We don't currently update the DPMS status of the connector (both in the connector itself and the connector's DPMS property) in the fb helper code. This means that if the kernel FB core has blanked the screen, sysfs will still show a DPMS status of "on". It also means that when X starts, it will try to light up the connectors, but the drm_crtc_helper code will ignore the DPMS change since according to the connector, the DPMS status is already on. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28436 (the annoying "my screen was blanked when I started X and now it won't light up" bug). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07drm/radeon/kms: fix shared ddc handlingAlex Deucher
Connectors with a shared ddc line can be connected to different encoders. Reported by Pasi Kärkkäinen <pasik@iki.fi> on dri-devel Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07drm/ttm: Allocate the page pool manager in the heap.Francisco Jerez
Repeated ttm_page_alloc_init/fini fails noisily because the pool manager kobj isn't zeroed out between uses (we could do just that but statically allocated kobjects are generally considered a bad thing). Move it to kzalloc'ed memory. Note that this patch drops the refcounting behavior of the pool allocator init/fini functions: it would have led to a race condition in its current form, and anyway it was never exploited. This fixes a regression with reloading kms modules at runtime, since page allocator was introduced. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-06IPoIB: Fix world-writable child interface control sysfs attributesOr Gerlitz
Sumeet Lahorani <sumeet.lahorani@oracle.com> reported that the IPoIB child entries are world-writable; however we don't want ordinary users to be able to create and destroy child interfaces, so fix them to be writable only by root. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clean up properly if qib_init() failsRalph Campbell
If qib_init() fails, the driver fails to free memory, unregister device files, and unregister with the PCIe framework. The driver will unload without error but a subsequent driver load will cause the system to panic. This was found by changing the 7220 code to load the serdes microcode separately and not installing the microcode file. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Completion queue callback needs to be single threadedRalph Campbell
Workqueues aren't exactly equivalent to tasklets since the callback function may be called from multiple CPUs before the callback returns. This causes completion notification callbacks to have MT bugs since they weren't expecting this behavior. The fix is to use a single threaded work queue. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Update 7322 serdes tablesRalph Campbell
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clear 6120 hardware error registerRalph Campbell
The hardware error register needs to be cleared or another interrupt will be generated, thus causing an infinite loop. This is a regression introduced when removing debug output. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clear eager buffer memory for each new processRalph Campbell
The eager buffers are not being cleared before being mmapped into a new user address space. This is a potential security risk and should be fixed. Note that the eager header queue is already being cleared. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Mask hardware error during link resetRalph Campbell
The HCA checks for certain hardware errors which can be falsely triggered when the IB link is reset. The fix is to mask them rather than report them. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problemDave Olson
Don't set write combining via PAT on the VL15 buffers to avoid a rare problem with unaligned writes from interrupt-flushed store buffers. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Derive smac_idx from port viidSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Avoid false GTS CIDX_INC overflowsSteve Wise
The T4 IQ hw design assumes CIDX_INC credits will be returned on a regular basis and always before the CIDX counter crosses over the PIDX counter. For RDMA CQs, however, returning CIDX_INC credits is only needed and desired when and if the CQ is armed for notification. This can lead to a GTS write returning credits that causes the HW to reject the credit update because it causes CIDX to pass PIDX. Once this happens, the CIDX/PIDX counters get out of whack and an application can miss a notification and get stuck blocked awaiting a notification. To avoid this, we allocate the HW IQ 2x times the requested size. This seems to avoid the false overflow failures. If we see more issues with this, then we'll have to add code in the poll path to return credits periodically like when the amount reaches 1/2 the queue depth). I would like to avoid this as it adds a PCI write transaction for applications that never arm the CQ (like most MPIs). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Don't call abort_connection() for active connect failuresSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-05net/ne: fix memory leak in ne_drv_probe()Kulikov Vasiliy
net_device allocated with alloc_eip_netdev() must be freed. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-05pcmcia: do not initialize the present flag too late.Dominik Brodowski
The "present" flag was initialized too late -- possibly, a card was already registered at this time, so re-setting the flag to 0 caused pcmcia_dev_present() to fail. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6205/1: perf: ensure counter delta is treated as unsigned ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220 ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220 ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA [ARM] pxa/mioa701: fix camera regression [ARM] pxa/z2: fix flash layout to final version [ARM] pxa/z2: fix missing include in battery driver [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.h
2010-07-04Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6: of/dma: fix build breakage in ppc4xx adma driver