aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Expand)Author
2011-11-10ENGR00157155-2 vpu: Get resource by platform_get_resource_bynameSammy He
2011-11-10ENGR00156996 ipuv3: fix pixel clock look up tableJason Chen
2011-11-10ENGR00156850 gpu-viv: add gpu-viv driver sourceRichard Zhao
2011-11-10ENGR00156319-2 mxc edid: use vmode as aspect rate flagJason Chen
2011-11-10ENGR00156673-3 ipuv3: move mach related definition to mach dirJason Chen
2011-11-10ENGR00156374 ipuv3: check channel busy while wait disable irqJason Chen
2011-11-10ENGR00156300 - EPDC fb: Move ISR code to work Q & replace spinlocks with mutexesDanny Nold
2011-11-10ENGR00156234 ipuv3: fix cpmem issueJason Chen
2011-11-10ENGR00155146 ipuv3: use mutex instead of spin lockJason Chen
2011-11-10ENGR00155140 ipuv3: add support of power suspend/resumeJason Chen
2011-11-10ENGR00155135-3 ipuv3 dev: add processing driver supportJason Chen
2011-11-10ENGR00155880 USB device: Fix RNDIS Full Speed hang during initializationAnish Trivedi
2011-11-10ENGR00155995 [MX6]Adjust default thermal pointAnson Huang
2011-11-10ENGR00154436-2 - MXC HDMI: Support complete feature setDanny Nold
2011-11-10ENGR00155845-1 mfd for hdmiAlan Tull
2011-11-10ENGR00155761 usb-host: fix the buiild warning with upstream reviewing patchPeter Chen
2011-11-10ENGR00155764 usb-host: fix the system hang when access register with clocks OFFPeter Chen
2011-11-10ENGR00155612-4 [mx6q]change the delay after clock frequence change to 1msTony Lin
2011-11-10ENGR00155612-3 [mx6q]add delay after cmd6 for eMMC compatibilityTony Lin
2011-11-10ENGR00155612-2 [mx6q]dynamically sd pad setting changeTony Lin
2011-11-10usb: ehci: make HC see up-to-date qh/qtd descriptor ASAPMing Lei
2011-11-10ENGR00155627 [MX6]Add thermal cooling deviceAnson Huang
2011-11-10ENGR00155627-1 [MX6]Add thermal cooling devieAnson Huang
2011-11-10ENGR00155611 [mx6q]correct eMMC DDR mode clock settingTony Lin
2011-11-10USB: Mark EHCI LPM functions as __maybe_unusedMaksim Rayskiy
2011-11-10ENGR00155396 usb-host: fix below build warningPeter Chen
2011-11-10ENGR00154080 ipuv3: fix clear buffer functionJason Chen
2011-11-10ENGR00155145 ipuv3 disp pos: restore pos setting after channel disable.Jason Chen
2011-11-10ENGR00153474 ipuv3 split mode: vf and enc task display with errorJason Chen
2011-11-10ENGR00155141 ipuv3 split mode: adjust split calculate functionJason Chen
2011-11-10ENGR00155400 [ath6kl]build warningTony Lin
2011-11-10ENGR00153895 [MX6Q]SD: SD3 clock is not off, when no SD card is in useTony Lin
2011-11-10ENGR00155391-2 [MX6]Clean up build warningAnson Huang
2011-11-10ENGR00155288 [mx6q]sd dat1 glitch causes system panicTony Lin
2011-11-10ENGR00139260-2 [ath6k wifi]add some delay after resumingTony Lin
2011-11-10ENGR00139260-1 [ath6k wifi]remove drivers under drivers/net/wirelessTony Lin
2011-11-10ENGR00155179-2: Change imx_viim to mxs_viim.Terry Lv
2011-11-10ENGR00154981 ipuv3: fix clock issueJason Chen
2011-11-10ENGR00154889-2: Add virtual iim driverTerry Lv
2011-11-10ENGR00139261 [MX6Q]support 8 bit MMC and eMMC DDR modeTony Lin
2011-11-10ENGR00154704 usb-gadget: wmb is needed after dtd pointer is updated for armv7Peter Chen
2011-11-10ENGR00154703 usb-gadget: fix spin_lock recursion problem at SMP platformPeter Chen
2011-11-10ENGR00154382 usb-udc: Set fsl arc usb driver as default usb device driverPeter Chen
2011-11-10ENGR00154437 mxc edid: add cea extend revision 1 and 2 supportJason Chen
2011-11-10ENGR00154525 SDMA: SDMA not works when event number bigger than 32Zeng Zhaoming
2011-11-10ENGR00139247-6 DMA : add DMA support for imx6qHuang Shijie
2011-11-10ENGR00139247-3 MTD : add GPMI driver for IMX6QHuang Shijie
2011-11-10ENGR00154431 - MXCFB_SET_WAVEFORMS ioctl brokenDanny Nold
2011-11-10ENGR00154429 rtc-snvs: request_irq too earlyRichard Zhao
2011-11-10ENGR00154108-3 mxc ldb: make ldb support two ipu in separate modeJason Chen
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 07:25:04 +0000