aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2010-07-08IB/qib: Use request_firmware() to load SD7220 firmwareBen Hutchings
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix world-writable child interface control sysfs attributes IB/qib: Clean up properly if qib_init() fails IB/qib: Completion queue callback needs to be single threaded IB/qib: Update 7322 serdes tables IB/qib: Clear 6120 hardware error register IB/qib: Clear eager buffer memory for each new process IB/qib: Mask hardware error during link reset IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problem RDMA/cxgb4: Derive smac_idx from port viid RDMA/cxgb4: Avoid false GTS CIDX_INC overflows RDMA/cxgb4: Don't call abort_connection() for active connect failures RDMA/cxgb4: Use the DMA state API instead of the pci equivalents
2010-07-08Merge branches 'cxgb4', 'ipoib' and 'qib' into for-nextRoland Dreier
2010-07-06IPoIB: Fix world-writable child interface control sysfs attributesOr Gerlitz
Sumeet Lahorani <sumeet.lahorani@oracle.com> reported that the IPoIB child entries are world-writable; however we don't want ordinary users to be able to create and destroy child interfaces, so fix them to be writable only by root. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clean up properly if qib_init() failsRalph Campbell
If qib_init() fails, the driver fails to free memory, unregister device files, and unregister with the PCIe framework. The driver will unload without error but a subsequent driver load will cause the system to panic. This was found by changing the 7220 code to load the serdes microcode separately and not installing the microcode file. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Completion queue callback needs to be single threadedRalph Campbell
Workqueues aren't exactly equivalent to tasklets since the callback function may be called from multiple CPUs before the callback returns. This causes completion notification callbacks to have MT bugs since they weren't expecting this behavior. The fix is to use a single threaded work queue. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Update 7322 serdes tablesRalph Campbell
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clear 6120 hardware error registerRalph Campbell
The hardware error register needs to be cleared or another interrupt will be generated, thus causing an infinite loop. This is a regression introduced when removing debug output. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Clear eager buffer memory for each new processRalph Campbell
The eager buffers are not being cleared before being mmapped into a new user address space. This is a potential security risk and should be fixed. Note that the eager header queue is already being cleared. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Mask hardware error during link resetRalph Campbell
The HCA checks for certain hardware errors which can be falsely triggered when the IB link is reset. The fix is to mask them rather than report them. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problemDave Olson
Don't set write combining via PAT on the VL15 buffers to avoid a rare problem with unaligned writes from interrupt-flushed store buffers. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Derive smac_idx from port viidSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Avoid false GTS CIDX_INC overflowsSteve Wise
The T4 IQ hw design assumes CIDX_INC credits will be returned on a regular basis and always before the CIDX counter crosses over the PIDX counter. For RDMA CQs, however, returning CIDX_INC credits is only needed and desired when and if the CQ is armed for notification. This can lead to a GTS write returning credits that causes the HW to reject the credit update because it causes CIDX to pass PIDX. Once this happens, the CIDX/PIDX counters get out of whack and an application can miss a notification and get stuck blocked awaiting a notification. To avoid this, we allocate the HW IQ 2x times the requested size. This seems to avoid the false overflow failures. If we see more issues with this, then we'll have to add code in the poll path to return credits periodically like when the amount reaches 1/2 the queue depth). I would like to avoid this as it adds a PCI write transaction for applications that never arm the CQ (like most MPIs). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Don't call abort_connection() for active connect failuresSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06RDMA/cxgb4: Use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-06-04fix the deadlock in qib_fsAl Viro
get_sb_single() calls fill_super with superblock locked; calling deactivate_super() will deadlock immedately. Moreover, if fill_super callback returns an error, get_sb_single() will release the reference to superblock itself just fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Remove DCA support until feature is finished IB/qib: Use a single txselect module parameter for serdes tuning IB/qib: Don't rely on (undefined) order of function parameter evaluation IB/ucm: Use memdup_user() IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=n
2010-05-27Merge branches 'misc' and 'qib' into for-nextRoland Dreier
2010-05-27IB/qib: Remove DCA support until feature is finishedRalph Campbell
The DCA code was left over from internal development to test the hardware feature and allow performance testing. The results were mixed and will require some additional work to make full use of the feature. Therefore, it is being removed for now. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-27ehca: convert cpu notifier to return encapsulate errno valueAkinobu Mita
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for ehca. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26IB/qib: Use a single txselect module parameter for serdes tuningRalph Campbell
As part of the earlier patches submitted and reviewed, it was agreed to change the way serdes tuning parameters were specified to the driver. The updated patch got dropped by the linux-rdma email list so the earlier version of qib_iba7322.c ended up being used. This patch updates qib_iab7322.c to the simpler, single parameter method of setting the serdes parameters. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-26IB/qib: Don't rely on (undefined) order of function parameter evaluationRoland Dreier
Some of the qib sysfs code passes a buffer pointer into simple_read_from_buffer() but relies on a function call in another parameter of the same call to initialize that pointer. Since the order of evaluation of function parameters is undefined, this will break if gcc chooses the wrong order. Fix this by splitting the code into two separate function calls. This was noticed because of warnings like the following on ppc: drivers/infiniband/hw/qib/qib_fs.c: In function 'portcntrs_2_read': drivers/infiniband/hw/qib/qib_fs.c:203: warning: 'counters' is used uninitialized in this function Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-25IB/ucm: Use memdup_user()Julia Lawall
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk>
2010-05-25IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=nRalph Campbell
This patch fixes a compile error saying qib_init_iba6120_funcs() is undefined when CONFIG_PCI_MSI is not defined. Thanks to Randy Dunlap <randy.dunlap@oracle.com> for finding this and suggesting the fix. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix incorrect unlock in nes_process_mac_intr() RDMA/nes: Async event for closed QP causes crash RDMA/nes: Have ethtool read hardware registers for rx/tx stats RDMA/cxgb4: Only insert sq qid in lookup table RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcode RDMA/cxgb4: Set fence flag for inv-local-stag work requests RDMA/cxgb4: Update some HW limits RDMA/cxgb4: Don't limit fastreg page list depth RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocation RDMA/cxgb4: Fix overflow bug in CQ arm RDMA/cxgb4: Optimize CQ overflow detection RDMA/cxgb4: CQ size must be IQ size - 2 RDMA/cxgb4: Register RDMA provider based on LLD state_change events RDMA/cxgb4: Detach from the LLD after unregistering RDMA device IB/ipath: Remove support for QLogic PCIe QLE devices IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size static IB/core: Allow device-specific per-port sysfs files mlx4_core: Clean up mlx4_alloc_icm() a bit mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()
2010-05-25Merge branches 'cxgb4', 'misc', 'mlx4', 'nes' and 'qib' into for-nextRoland Dreier
2010-05-25RDMA/nes: Fix incorrect unlock in nes_process_mac_intr()Chien Tung
Commit ce6e74f2 ("RDMA/nes: Make nesadapter->phy_lock usage consistent") introduced a problem where phy_lock was only unlocked within an if statement and so nes_process_mac_intr() could return with phy_lock still held. Fix this. This was discovered because of the sparse warning: drivers/infiniband/hw/nes/nes_hw.c:2643:9: warning: context imbalance in 'nes_process_mac_intr' - different lock contexts for basic block Reported-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/nes: Async event for closed QP causes crashFaisal Latif
Under abnormal termination, modify_qp() closes the QP, and async event (AE) handling also attempts to close the same QP, causing a crash. Fix this by checking the state of the QP before processing the AE. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/nes: Have ethtool read hardware registers for rx/tx statsFaisal Latif
Enhance ethtool to read hardware registers for rcv/tx error stats. Also add support for free pbl resources. Remove cq depth stats, which are not used. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Only insert sq qid in lookup tableSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcodeSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Set fence flag for inv-local-stag work requestsSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Update some HW limitsSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Don't limit fastreg page list depthSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocationSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Fix overflow bug in CQ armSteve Wise
- wrap cq->cqidx_inc based on cq size. - optimize t4_arm_cq logic. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Optimize CQ overflow detectionSteve Wise
1) save the timestamp flit in the cq when we consume a CQE. 2) always compare the saved flit with the previous entry flit when reading the next CQE entry. If the flits don't compare, then we have overflowed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: CQ size must be IQ size - 2Steve Wise
We need 1 extra entry for the status page and 1 to always have 1 free entry to detect when the queue is full. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Register RDMA provider based on LLD state_change eventsSteve Wise
The LLD now supports proper UP state change events, so move the RDMA provider registration to UP path. This fixes a crash when loading iw_cxgb4 _after_ the NFS/RDMA transport is up and running. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-24RDMA/cxgb4: Detach from the LLD after unregistering RDMA deviceSteve Wise
In the RDMA core unregister path, kernel users will be calling down into the T4 provider to release resources. So we cannot detach from the LLD until this process completes. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23IB/ipath: Remove support for QLogic PCIe QLE devicesRalph Campbell
The ib_qib driver is taking over support for QLogic PCIe QLE devices, so remove support for them from ib_ipath. The ib_ipath driver now supports only the obsolete QLogic Hyper-Transport IB host channel adapter (model QHT7140). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23IB/qib: Add new qib driver for QLogic PCIe InfiniBand adaptersRalph Campbell
Add a low-level IB driver for QLogic PCIe adapters. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size staticRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-21IB/core: Allow device-specific per-port sysfs filesRalph Campbell
Add a new parameter to ib_register_device() so that low-level device drivers can pass in a pointer to a callback function that will be called for each port that is registered in sysfs. This allows low-level device drivers to create files in /sys/class/infiniband/<hca>/ports/<N>/ without having to poke through the internals of the RDMA sysfs handling. There is no need for an unregister function since the kobject reference will go to zero when ib_unregister_device() is called. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-18of: Always use 'struct device.of_node' to get device node pointer.Grant Likely
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-15Merge branches 'amso1100', 'bkl', 'cma', 'cxgb3', 'cxgb4', 'ipoib', 'iser', ↵Roland Dreier
'masked-atomics', 'misc', 'mthca' and 'nes' into for-next