Age | Commit message (Collapse) | Author |
|
* lt-3.2-imx5: (124 commits)
SAUCE: fix the missing header of <linux/module.h>
SAUCE: fix the removal of mxc_register_device()
SAUCE: mx53_loco: fix gpio_to_irq() being non-constant
SAUCE: fix building errors after rebased to v3.2
LINARO: Add lt-mx5_defconfig
ARM i.MX5: fix system_rev if not set by atag or DT
ENGR00162701 mxc_vout: fix potential deadlock of fb_blank
ENGR00162666 mxc_vout: v4l2 playback blocking issue
ENGR00162665 ipuv3 fb: fix non-interleave format wrong color issue
ENGR00162664 mxc_vout: modify pp bypass condition
ENGR00162663 ipuv3 fb: add vertical flip support
ENGR00162475 ipuv3 fb: fix camera preview failure
ENGR00162360 mxc_vout: fix STREAMOFF and G_CROP issues
ENGR00162358 ipuv3 fb: only check pos when fb is unblank
ENGR00162354 ipuv3 device: correct kthread operation for split task
SAUCE: mx53: add mxc_lcdif support
SAUCE: add arm-pmu device
SAUCE: remove unnecessary suspend/resume functions from mxc_spdif
ENGR00162218 mxc_vout: put set position function before set var
ENGR00162208 ipuv3 device: fix jitter issue of split mode
...
|
|
|
|
Signed-off-by: Jason Chen <jason.chen@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Jason Chen <jason.chen@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
1. no dma alloc for rot buf every time which will cost time.
2. fix split mode condition.
3. export some functions.
This patch for MSL file.
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
for arch/arm/plat-mxc/include/mach/ipu-v3.h
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
commit ad19aef4a80094221b1b826185aea924627e8642
ENGR00155140 ipuv3: add support of power suspend/resume
add support of power suspend/resume.
because IPU has issue of restore current buffer register,
this code only work for single buffer mode.
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
BugLink: http://bugs.launchpad.net/bugs/837155
S/PDIF tx and rx using ASoC layer.
Signed-off-by: Alan Tull <alan.tull@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Copied directly from linux-linaro-2.6.38, largely commit bb9ebb9a5:
ENGR00141217-4 USB: Add USB Host/device/otg drivers support
Signed-off-by: Zhang Yan <b34916@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Copied directly from linux-linaro-2.6.38, largely commit bb9ebb9a5:
ENGR00141217-4 USB: Add USB Host/device/otg drivers support
Signed-off-by: Zhang Yan <b34916@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Copied directly from linux-linaro-2.6.38, commit b313cadcc:
ENGR00141217-3 MX53 MSL part upgrade to 2.6.38
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Signed-off-by: Zhang Yan <b34916@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Change copied directly from commit:
c3c5711 ENGR00141217-2 include file upgrade to 2.6.38
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
|
|
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
|
|
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
Base IPUv3 driver copied directly from linux-imx-2.6.38.
Signed-off-by: Jason Chen <b02280@freescale.com>
|
|
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
into fixes
|
|
Conflicts:
arch/arm/mach-imx/mm-imx3.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
map_io is the only place to call iotable_init.
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
[shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()]
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
The patch removes imx_idle hook and use pm_idle instead to get imx
arch_idle prepared for the cleanup. It's suggested by Russel King
as below.
> The final removal of mach/system.h depends on getting rid of the arch_idle
> thing. While going through these headers, I was dismayed to find these:
>
> arch/arm/mach-s3c2410/include/mach/system.h:void (*s3c24xx_idle)(void);
> arch/arm/plat-mxc/include/mach/system.h:extern void (*imx_idle)(void);
>
> when we have a perfectly good pm_idle hook already in place - so there's
> no excuse for these especially when other platforms are already using
> pm_idle to hook their platform specific idle function into. This is
> something that better be gone at the next merge window!
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
Since commit (167a19d2: ARM: imx: Introduce generic function for displaying silicon revision)
we no longer need the chip revision strings, so remove them.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
The patch "ARM: gic: consolidate PPI handling" removes the usage
of test_for_ltirq. After the merge of imx6q remove this there, too.
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
* 'next/soc' of git://git.linaro.org/people/arnd/arm-soc: (21 commits)
MAINTAINERS: add ARM/FREESCALE IMX6 entry
arm/imx: merge i.MX3 and i.MX6
arm/imx6q: add suspend/resume support
arm/imx6q: add device tree machine support
arm/imx6q: add smp and cpu hotplug support
arm/imx6q: add core drivers clock, gpc, mmdc and src
arm/imx: add gic_handle_irq function
arm/imx6q: add core definitions and low-level debug uart
arm/imx6q: add device tree source
ARM: highbank: add suspend support
ARM: highbank: Add cpu hotplug support
ARM: highbank: add SMP support
MAINTAINERS: add Calxeda Highbank ARM platform
ARM: add Highbank core platform support
ARM: highbank: add devicetree source
ARM: l2x0: add empty l2x0_of_init
picoxcell: add a definition of VMALLOC_END
picoxcell: remove custom ioremap implementation
picoxcell: add the DTS for the PC7302 board
picoxcell: add the DTS for pc3x2 and pc3x3 devices
...
Fix up trivial conflicts in arch/arm/Kconfig, and some more header file
conflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge
by Arnd).
|
|
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc:
ARM: gic: use module.h instead of export.h
ARM: gic: fix irq_alloc_descs handling for sparse irq
ARM: gic: add OF based initialization
ARM: gic: add irq_domain support
irq: support domains with non-zero hwirq base
of/irq: introduce of_irq_init
ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
ARM: at91: dt: at91sam9g45 family and board device tree files
arm/mx5: add device tree support for imx51 babbage
arm/mx5: add device tree support for imx53 boards
ARM: msm: Add devicetree support for msm8660-surf
msm_serial: Add devicetree support
msm_serial: Use relative resources for iomem
Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
|
|
* 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-soc:
arm/imx: use Kconfig choice for low-level debug UART selection
ARM: realview: use Kconfig choice for debug UART selection
ARM: plat-samsung: use Kconfig choice for debug UART selection
ARM: versatile: convert logical CPU numbers to physical numbers
ARM: ux500: convert logical CPU numbers to physical numbers
ARM: shmobile: convert logical CPU numbers to physical numbers
ARM: msm: convert logical CPU numbers to physical numbers
ARM: exynos4: convert logical CPU numbers to physical numbers
Fix up trivial conflict (config DEBUG_S3C_UART move/split vs addition of
ARM_KPROBES_TEST option) in arch/arm/Kconfig.debug
|
|
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits)
ARM: tegra: update defconfig
arm/tegra: Harmony: Configure PMC for low-level interrupts
arm/tegra: device tree support for ventana board
arm/tegra: add support for ventana pinmuxing
arm/tegra: prepare Seaboard pinmux code for derived boards
arm/tegra: pinmux: ioremap registers
gpio/tegra: Convert to a platform device
arm/tegra: Convert pinmux driver to a platform device
arm/dt: Tegra: Add pinmux node to tegra20.dtsi
arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
ARM: mx5: fix clock usage for suspend
ARM i.MX entry-macro.S: remove now unused code
ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
ARM i.MX tzic: add handle_irq function
ARM i.MX avic: add handle_irq function
ARM: mx25: Add the missing IIM base definition
ARM i.MX avic: convert to use generic irq chip
mx31moboard: Add poweroff support
ARM: mach-qong: Add watchdog support
ARM: davinci: AM18x: Add wl1271/wlan support
...
Fix up conflicts in:
arch/arm/mach-at91/at91sam9g45.c
arch/arm/mach-mx5/devices-imx53.h
arch/arm/plat-mxc/include/mach/memory.h
|
|
* 'next/driver' of git://git.linaro.org/people/arnd/arm-soc:
hw_random: add driver for atmel true hardware random number generator
ARM: at91: at91sam9g45: add trng clock and platform device
MX53 Enable the AHCI SATA on MX53 SMD board
MX53 Enable the AHCI SATA on MX53 LOCO board
MX53 Enable the AHCI SATA on MX53 ARD board
AHCI Add the AHCI SATA feature on the MX53 platforms
Fix pata imx resource
ARM: imx: Define functions for registering PATA
ARM: imx: Add PATA clock support
ARM: imx: Add PATA resources for other i.MX processors
imx: efika: Enable pata.
imx51: add pata clock
imx51: add pata device
Fix up trivial conflict (new selects next to each other from separate
branches for EFIKA_COMMON) in arch/arm/mach-mx5/Kconfig
|
|
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits)
ARM: mach-mxs: fix machines' initializers order
mmc: mxcmmc: explicitly includes mach/hardware.h
arm/imx: explicitly includes mach/hardware.h in pm-imx27.c
arm/imx: remove mx27_setup_weimcs() from mx27.h
arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c
arm/imx: remove mx31_setup_weimcs() from mx31.h
ARM: tegra: devices.c should include devices.h
ARM: tegra: cpu-tegra: unexport two functions
ARM: tegra: cpu-tegra: sparse type fix
ARM: tegra: dma: staticify some tables and functions
ARM: tegra: tegra2_clocks: don't export some tables
ARM: tegra: tegra_powergate_is_powered should be static
ARM: tegra: tegra_rtc_read_ms should be static
ARM: tegra: tegra_init_cache should be static
ARM: tegra: pcie: 0 -> NULL changes
ARM: tegra: pcie: include board.h
ARM: tegra: pcie: don't cast __iomem pointers
ARM: tegra: tegra2_clocks: 0 -> NULL changes
ARM: tegra: tegra2_clocks: don't cast __iomem pointers
ARM: tegra: timer: don't cast __iomem pointers
...
Fix up trivial conflicts in
arch/arm/mach-omap2/Makefile,
arch/arm/mach-u300/{Makefile.boot,core.c}
arch/arm/plat-{mxc,omap}/devices.c
|
|
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits)
ARM: pxa/cm-x300: properly set bt_reset pin
ARM: mmp: rename SHEEVAD to GPLUGD
ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
ARM: i.MX28: shift frac value in _CLK_SET_RATE
plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
ARM: mx5: fix clock usage for suspend
ARM: pxa: use correct __iomem annotations
ARM: pxa: sharpsl pm needs SPI
ARM: pxa: centro and treo680 need palm27x
ARM: pxa: make pxafb_smart_*() empty when not enabled
ARM: pxa: select POWER_SUPPLY on raumfeld
ARM: pxa: pxa95x is incompatible with earlier pxa
ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
ARM: pxa: pxa95x/saarb depends on pxa3xx code
ARM: pxa: allow selecting just one of TREO680/CENTRO
ARM: pxa: export symbols from pxa3xx-ulpi
ARM: pxa: make zylonite_pxa*_init declaration match code
ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available
ARM: at91: add defconfig for at91sam9g45 family
ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig
...
|
|
Conflicts:
Documentation/devicetree/bindings/arm/fsl.txt
arch/arm/Kconfig
arch/arm/Kconfig.debug
arch/arm/plat-mxc/include/mach/common.h
|
|
Conflicts:
arch/arm/mach-mxs/include/mach/gpio.h
arch/arm/mach-omap2/board-generic.c
arch/arm/plat-mxc/include/mach/gpio.h
|
|
The board changes in the imx/devel branch conflict with other changes in
the device imx/dt branch.
Conflicts:
arch/arm/mach-mx5/board-mx53_loco.c
arch/arm/mach-mx5/board-mx53_smd.c
arch/arm/plat-mxc/include/mach/common.h
arch/arm/plat-mxc/include/mach/memory.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'for-32/i2c/eg20t-v4', 'for-32/i2c/designware-v5' and 'for-32/i2c/au1550' into for-linus/i2c-3.2
|
|
Fix up all conflicts between the memory.h cleanup and bug fixes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Conflicts:
arch/arm/mach-mxs/include/mach/gpio.h
arch/arm/plat-mxc/include/mach/gpio.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Conflicts:
arch/arm/mach-mxs/include/mach/gpio.h
arch/arm/plat-mxc/include/mach/gpio.h
drivers/video/omap/lcd_apollon.c
drivers/video/omap/lcd_ldp.c
drivers/video/omap/lcd_overo.c
|