path: root/arch/arm/mach-mx6/board-mx6q_sabreauto.c
AgeCommit message (Expand)Author
2012-01-12ENGR00171890 [MX6Q_ARD]fix the boot fail when otg power is not initializedrel_imx_2.6.38_12.01.01er4Anson Huang
2012-01-12ENGR00171708: [v2] Remove build warnings in ENGR00170444B37753
2012-01-11ENGR00171792: MX6Q_ARD: fix the pad setting conflicts between can0 and enetHake Huang
2012-01-11ENGR00170740 enable pwm3 and pwm both lvds backlightGuillermo Michel
2012-01-11ENGR00170817 UART2 iomux fix configurationAlejandro Sierra
2012-01-10ENGR00170323-mx6q:sabreauto:fix_flexcan_IO_expander_and_pad_settingsOscar Luna
2012-01-10ENGR00170880 Add gpio key supportAlejandro Sierra
2012-01-09ENGR00170444: [v3]imx6sabreauto adv7180 TVin portb37753
2012-01-09ENGR00170124: Fix for USBH1 OTG IOMUX and GPIOs in board-mx6q_sabreauto.cFrancisco Munoz
2012-01-02ENGR00169747 MX6Q:ARD:Enable SD1 Card reader from ARD Main boardPrabhu Sundararaj
2011-12-31ENGR00171115 mx6_ard: Enable the enet on mx6q ardHake Huang
2011-12-28ENGR00171000 [MX6]Fix build warningAnson Huang
2011-12-21ENGR00170255-1 MX6Q PFUZE100: add board level support for pfuze100Robin Gong
2011-12-20ENGR00170628 imx6q-ard: fix imx-cs42888 audio codec supportAdrian Alonso
2011-12-20ENGR00170519 imx6q-ard remove regulator for sgtl5000 codecAdrian Alonso
2011-12-19ENGR00170523 imx6q-ard: add egalax touchscreen supportAdrian Alonso
2011-12-16ENGR00169975: imx6sabreauto fix i2c iomux pad settingsAdrian Alonso
2011-12-15ENGR00170341 board-mx6q-sabreauto: update spdif for sabreauto platformAdrian Alonso
2011-12-15ENGR00170244-3 ARM: AHCI: Enable PDDQ mode on mx6 sabreauto boardRichard Zhu
2011-12-13ENGR00170119 MX6Q:ARD: Sabre-auto(ARD) SATA supportPrabhu Sundararaj
2011-12-12ENGR00161124 [dvfs, cpufreq] Use regulator API to set cpu voltageNancy Chen
2011-12-12ENGR00169730 MX6Q:ARD:Rename to correct function names from ARM2 to SABRE AUTOPrabhu Sundararaj
2011-11-22ENGR00162709 Add Support for MX6Q Sabre AutoEric Sun
2011-10-28ENGR00161005-1 MX6Q Kernel Rename sabreauto to arm2 boardAnish Trivedi
2011-10-28ENGR00160797-1 [i.MX6q] Add Anatop regulator supportNancy Chen
2011-10-28ENGR00160860-1 hdmi audio driverAlan Tull
2011-10-28ENGR00160940-1 [MX6Q]sdhci: add delay line setting in board dataTony Lin
2011-10-27ENGR00160709-3 Move board specific code out of FEC driverMahesh Mahadevan
2011-10-25ENGR00139265-4 mxc alsa soc spdif driverAlan Tull
2011-10-19ENGR00160112-2 MX6Q camera: Add camera data and initial pin configurationYuxi
2011-10-13ENGR00159641: MX6-Add DVFS-CORE supportRanjani Vaidyanathan
2011-09-08ENGR00156232 [mx6q]change cpuinfo keywordTony Lin
2011-09-06ENGR00156153: MX6- Fix bugs in clock code.Ranjani Vaidyanathan
2011-09-02ENGR00154436-1 - MACH-MX6: MXC HDMI updates to support full feature setDanny Nold
2011-09-01ENGR00155845-2 mfd for hdmiAlan Tull
2011-09-01ENGR00155612-1 [mx6q]dynamically sd pad setting changeTony Lin
2011-08-30ENGR00139280: MX6: Add CPUFREQ supportRanjani Vaidyanathan
2011-08-30ENGR00153925 MX6Q: Fix EGA touch failure on lvds2 portFrank Li
2011-08-29ENGR00139255-1 MX6Q_BSP ESAI: Add esai recording supportLionel Xu
2011-08-16ENGR00154889-1: Add virtual iim driver to imx5 and imx6 platformTerry Lv
2011-08-11ENGR00139261-1 [esdhc]add 8 bit mode support para in platform dataTony Lin
2011-08-10ENGR00154647 mxc: viv-gpu: squash gpu devicesRichard Zhao
2011-08-09ENGR00139247-5 ARM: add APBH-DMA device for imx6QHuang Shijie
2011-08-09ENGR00139247-2 MX6Q: add GPMI deviceHuang Shijie
2011-08-05ENGR00154108-2 imx6q MSL: make ldb support two ipu in separate modeJason Chen
2011-07-27ENGR00153740-5 mx6: add asrc supportDong Aisheng
2011-07-26ENGR00153670-2 - mach-mx6: Add support for MXC HDMIDanny Nold
2011-07-25ENGR00153651-1 ESAI: Prepare MSL support for esai/cs42888 audio codec driverLionel Xu
2011-07-20ENGR00139238-3 MX6: add p1003 i2c touch deviceFrank Li
2011-07-19ENGR00139274-1 [MX6]Enable suspend/resume featureAnson Huang