aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-09-12[PATCH] USB: PL2303: CA-42 Phone cableRobert Spanton
This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable to the list of devices handled by the pl2303 driver. The patch is against 2.6.13. Signed-off-by: Robert Spanton <rds204@zepler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI, pxa27x OHCI port power tweaksDavid Brownell
Now that it's in use on other boards, a bug in the original code needs fixing. There is no need for the PXA27x OHCI to set usb power during init, since the hub driver in usbcore handles that. Those platform-specific power control functions are also incorrect, and should therefore be removed. Add a check to clear the OTG pin hold bit until such times OTG is properly implemented. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI relies less on NDP registerDavid Brownell
Some OHCI implementations have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed (except for an AMD756 bug workaround). It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI irq tweakDavid Brownell
Evidently there are some boards which care a lot about this, but as a rule it's been hard to notice. OHCI_INTR_RD wasn't always cleared in the ohci irq handler. On some systems this means certain remote wakeup scenarios could seem to hang (in an interrupt storm, RD never clearing). From: "William Morrow" <William.Morrow@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB gadgetfs: fixes an error on writing to endpoint filePavol Kurina
this patch fixes an "Invalid argument" error returned by a write to an endpoint-file after reopening it in the gadgetfs module in the kernel 2.6.12. This was testet only with dummy_hcd module! Signed-off-by: Pavol Kurina <kurina@gmx.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2005-09-12[PATCH] drivers/usb: fix-up schedule_timeout() usageNishanth Aravamudan
Description: Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: get rid of minor log spammingDavid Brownell
Routine cases like handoff-to-companion shouldn't trigger diagnostics. This gets rid of some recently added log spamming. It's routine for hub_port_wait_reset() to return -ENOTCONN to indicate handoff from highspeed hubs to companions, so an error message is incorrect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: EHCI workaround for NForce and mem > 2GBDavid Brownell
NVidia reports (via Mark Overby) that some of their EHCI controllers don't like certain data structure addresses beyond the 2GB mark. He provided an earlier version of this patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: EHCI port tweaksDavid Brownell
One change may improve some S1 or S3 resume cases, and the other seems mostly to explain some strange state "lsusb" would show. Two fixes: - On resume, don't think about resuming any unpowered port, or resetting any port with OWNER set to the OHCI/UHCI companion. This will make some S1 and S3 resume scenarios work better. - PORT_CSC was not being cleared correctly in ehci_hub_status_data. This was visible at least through current versions of "lsusb", and might have caused some other hub related strangeness. The fix addresses all three write-to-clear bits, using the same approach that UHCI happens to use: a mask of bits that are cleared in most writes to that port status register. Original patch seems to have been from from William.Morrow@amd.com and this version (from David) finishes the write-to-clear changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: CP2101 New Device IDsCraig Shelley
Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB UHCI: remove the FSBR kernel timerAlan Stern
This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] usbcore: small changes to HCD glue layerAlan Stern
This patch (as549) introduces two small changes in the HCD glue layer. The first simply removes a redundant test. The second allows root-hub polling to continue for a single iteration after a host controller dies; this is needed for the patch that follows. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: add apple usb touchpad driverStelian Pop
This is a driver for the USB touchpad which can be found on post-February 2005 Apple PowerBooks. This driver is derived from Johannes Berg's appletrackpad driver [1], but it has been improved in some areas: * appletouch is a full kernel driver, no userspace program is necessary * appletouch can be interfaced with the synaptics X11 driver[2], in order to have touchpad acceleration, scrolling, two/three finger tap, etc. This driver has been tested by the readers of the 'debian-powerpc' mailing list for a few weeks now and I believe it is now ready for inclusion into the mainline kernel. Credits go to Johannes Berg for reverse-engineering the touchpad protocol, Frank Arnold for further improvements, and Alex Harper for some additional information about the inner workings of the touchpad sensors. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: sisusb[vga] updateThomas Winischhofer
here is a new and extended version of the sisusbvga (previously: sisusb) driver. The patch is against 2.6.13 and updates the driver to version 0.0.8. Additions include complete VGA/EGA text console support and a build-in display mode infrastructure for userland applications that don't know about the graphics internals. Fixes include some BE/LE issues and a get/put_dev bug in the previous version. Other changes include a change of the module name from "sisusb" to "sisusbvga". The previous one was too generic IMHO. Please note that the patch also affects the Makefile in drivers/video/console as the driver requires the VGA 8x16 font in case the text console part is selected. Heavily tested, as usual. Please apply. One thing though: I already prepared for removal of the "mode" field and the changed "name" field in the usb_class_driver structure. This will perhaps need some refinement depending on whether you/Linus merge the respective core changes before or after 2.6.14. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12Merge ../torvalds-2.6/ Greg KH
2005-09-12Revert "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new ↵Greg KH
G4 powerbooks" This reverts 22af8878d2d641c6b15fe39fe4de3c05b2c477f0 commit. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] x86-64: clean up local_add/sub argumentsAndi Kleen
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Use correct mask to compute conflicting nodes in SRATAndi Kleen
The nodes are not set online yet at this point. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: reset apicid<->node tables when SRAT cannot be parsedAndi Kleen
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Clean up the SRAT node list before computing the hash functionAndi Kleen
Also use for_each_node_mask instead of hand crafted loops. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: i386/x86-64: Fix time going twice as fast problem on ATI ↵Chuck Ebbert
Xpress chipsets Original patch from Bertro Simul This is probably still not quite correct, but seems to be the best solution so far. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: reduce x86-64 bug frame by 4 bytesJan Beulich
As mentioned before, the size of the bug frame can be further reduced while continuing to use instructions to encode the information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Make dmi_find_device for !DMI case inlineAndi Kleen
Otherwise it will generate warnings and be generated many times. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Allow frame pointer and fix help text.Andi Kleen
Allow frame pointer and fix help text. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: more gratitious linux/irq.h includesAl Viro
... and with that all instances in arch/x86_64 are gone. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Fix incorrect FP signalsChuck Ebbert
This is the same patch that went into i386 just before 2.6.13 came out. I still can't build 64-bit user apps, so I tested with program (see below) in 32-bit mode on 64-bit kernel: Before: $ fpsig handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10 handler: altstack is at 0x0804b000, ebp = 0x0804bc7c handler: si_signo = 8, si_errno = 0, si_code = 0 [unknown] handler: fpu cwd = 0xb40, fpu swd = 0xbaa0 handler: i387 unmasked precision exception, rounded up After: $ fpsig handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10 handler: altstack is at 0x0804b000, ebp = 0x0804bc7c handler: si_signo = 8, si_errno = 0, si_code = 6 [inexact result] handler: fpu cwd = 0xb40, fpu swd = 0xbaa0 handler: i387 unmasked precision exception, rounded up Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Clean up nmi error messageChuck Ebbert
The x86_64 nmi code is missing a newline in one of its messages. I added a space before the CPU id for readability and killed the trailing space on the previous line as well. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Lose constraints on cmpxchgJan Beulich
While only cosmetic for x86-64, this adjusts the cmpxchg code appearantly inherited from i386 to use more generic constraints. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Declare NMI_VECTOR and handle it in the IPI sending code.Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Remove unused vxtime.hz fieldAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Set the stack pointer correctly in init_thread and init_tssAndi Kleen
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Safe interrupts in oops_begin/endJan Beulich
Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Merge msr.c with i386 versionAndi Kleen
The only difference was the inline assembly, so move that into asm/msr.h and merge with the i386 version. This adds some missing sysfs support code to x86-64. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Clean up includes in arch/x86_64/kernel/suspend.cAl Viro
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Fix CFI informationJan Beulich
Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Fix gcc 4 warnings about pointer signednessAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Use physflat on Intel for < 8 CPUs with CPU hotplugAndi Kleen
This avoids races with the APIC broadcast/mask modes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Add dma_sync_single_range_for_{cpu,device}Andi Kleen
Currently just defined to their non range parts. Pointed out by John Linville Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Improve error handling for overlapping PXMs in SRAT.Andi Kleen
- Report PXMs instead of nodes - Report the correct PXM, not always the one of node 1. - Only warn for the case of a PXM overlapping by itself Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Prevent gcc 4 from optimizing away vsyscallsAndi Kleen
They were previously static. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Delivery mode should be APIC_DM_FIXED when using physical mode.Ashok Raj
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] Replace extern inline with static inline in asm-x86_64/*Adrian Bunk
They should be identical in the kernel now, but this makes it consistent with other code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Remove freeing of SMP trampoline pagesAndi Kleen
Nick points out it never worked because PageReserved was set and it might cause problems later on. Also HOTPLUG_CPU is much more common now so let's care not too much about the !hotplug case. Cc: nickpiggin@yahoo.com.au Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Fix typo CONFIG_CPU_HOTPLUG -> CONFIG_HOTPLUG_CPU in genapic.cAndi Kleen
Noted by Ashok Raj Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] Remove unnecessary BUG_ON in irq.cAlexander Nyberg
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] Increase nodemap hash.Nakul Saraiya
Needed for some newer Opteron systems with E stepping and memory relocation enabled. The node addresses are different in lower bits now so the nodemap hash function needs to be enlarged. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Fix off by one in pfn_validJim Paradis
When I gave proposed the fix to pfn_valid() for RHEL4, Stephen Tweedie's sharp eyes caught this: Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] i386: add memory clobbers to syscall macrosAndi Kleen
As noted by matz@suse.de The problem is, that on i386 the syscallN macro is defined like so: long __res; \ __asm__ volatile ("int $0x80" \ : "=a" (__res) \ : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \ "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5))); \ If one of the arguments (in the _llseek syscall it's the arg4) is a pointer which the syscall is expected to write to (to the memory pointed to by this ptr), then this side-effect is not captured in the asm. If anyone uses this macro to define it's own version of the syscall (sometimes necessary when not using glibc) and it's inlined, then GCC doesn't know that this asm write to "*dest", when called like so for instance: out = 1; llseek (fd, bla, blubb, &out, trara) use (out); Here nobody tells GCC that "out" actually is written to (just a pointer to it is passed to the asm). Hence GCC might (and in the above bug did) copy-propagate "1" into the second use of "out". The easiest solution would be to add a "memory" clobber to the definition of this syscall macro. As this is a syscall, it shouldn't inhibit too many optimizations. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Fix show_mem a little bitAndi Kleen
- Add KERN_INFO to printks (from i386) - Use longs instead of ints to accumulate pages. - Fix broken indenting. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Remove disable_tsc code in context switchAndi Kleen
It only offers extremly dubious security advantages and is not worth the overhead in this critical path. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>