diff options
Diffstat (limited to 'include/asm-arm/arch-lh7a40x/registers.h')
| -rw-r--r-- | include/asm-arm/arch-lh7a40x/registers.h | 65 |
1 files changed, 48 insertions, 17 deletions
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h index 2edb22e3545..b4f09b3e2d0 100644 --- a/include/asm-arm/arch-lh7a40x/registers.h +++ b/include/asm-arm/arch-lh7a40x/registers.h @@ -9,7 +9,6 @@ * */ -#include <linux/config.h> #include <asm/arch/constants.h> #ifndef __ASM_ARCH_REGISTERS_H @@ -18,7 +17,7 @@ /* Physical register base addresses */ -#define AC97_PHYS (0x80000000) /* AC97 Controller */ +#define AC97C_PHYS (0x80000000) /* AC97 Controller */ #define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ #define USB_PHYS (0x80000200) /* USB Client */ #define SCI_PHYS (0x80000300) /* Secure Card Interface */ @@ -35,6 +34,8 @@ #define RTC_PHYS (0x80000d00) /* Real-time Clock */ #define GPIO_PHYS (0x80000e00) /* General Purpose IO */ #define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ +#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */ +#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */ #define WDT_PHYS (0x80001400) /* Watchdog Timer */ #define SMC_PHYS (0x80002000) /* Static Memory Controller */ #define SDRC_PHYS (0x80002400) /* SDRAM Controller */ @@ -43,6 +44,7 @@ /* Physical registers of the LH7A404 */ +#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */ #define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ #define USBH_PHYS (0x80009000) /* USB OHCI host controller */ #define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ @@ -53,10 +55,32 @@ /* Clock/State Controller register */ +#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */ #define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ +#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */ +#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */ #define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ - +#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27) +#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26) +#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25) +#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24) +#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23) +#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22) +#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21) +#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20) +#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19) +#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18) +#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17) +#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16) + +#define CSC_PWRSR_CHIPMAN_SHIFT (24) +#define CSC_PWRSR_CHIPMAN_MASK (0xff) +#define CSC_PWRSR_CHIPID_SHIFT (16) +#define CSC_PWRSR_CHIPID_MASK (0xff) + +#define CSC_USBDRESET_APBRESETREG (1<<1) +#define CSC_USBDRESET_IORESETREG (1<<0) /* Interrupt Controller registers */ @@ -109,6 +133,13 @@ #define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ #define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ #define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ +#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c) +#define GPIO_PADD __REG(GPIO_PHYS + 0x10) +#define GPIO_PAD __REG(GPIO_PHYS + 0x00) +#define GPIO_PCD __REG(GPIO_PHYS + 0x08) +#define GPIO_PCDD __REG(GPIO_PHYS + 0x18) +#define GPIO_PEDD __REG(GPIO_PHYS + 0x24) +#define GPIO_PED __REG(GPIO_PHYS + 0x20) /* Static Memory Controller registers */ @@ -138,20 +169,21 @@ #endif #if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define CPLD_CONTROL __REG8(CPLD02_PHYS) -# define CPLD_SPI_DATA __REG8(CPLD06_PHYS) -# define CPLD_SPI_CONTROL __REG8(CPLD08_PHYS) -# define CPLD_SPI_EEPROM __REG8(CPLD0A_PHYS) -# define CPLD_INTERRUPTS __REG8(CPLD0C_PHYS) /* IRQ mask/status */ -# define CPLD_BOOT_MODE __REG8(CPLD0E_PHYS) -# define CPLD_FLASH __REG8(CPLD10_PHYS) -# define CPLD_POWER_MGMT __REG8(CPLD12_PHYS) -# define CPLD_REVISION __REG8(CPLD14_PHYS) -# define CPLD_GPIO_EXT __REG8(CPLD16_PHYS) -# define CPLD_GPIO_DATA __REG8(CPLD18_PHYS) -# define CPLD_GPIO_DIR __REG8(CPLD1A_PHYS) -#endif +# define CPLD_CONTROL __REG16(CPLD02_PHYS) +# define CPLD_SPI_DATA __REG16(CPLD06_PHYS) +# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS) +# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS) +# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */ +# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS) +# define CPLD_FLASH __REG16(CPLD10_PHYS) +# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS) +# define CPLD_REVISION __REG16(CPLD14_PHYS) +# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS) +# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS) +# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS) + +#endif /* Timer registers */ @@ -190,4 +222,3 @@ #endif /* _ASM_ARCH_REGISTERS_H */ - |