1 files changed, 98 insertions, 57 deletions

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 03d063554b7..ce1e5e9d06f 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -1,7 +1,7 @@
 /*
  * Blackfin On-Chip MAC Driver
  *
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -23,7 +23,6 @@
 #include <linux/device.h>
 #include <linux/spinlock.h>
 #include <linux/mii.h>
-#include <linux/phy.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
@@ -76,12 +75,6 @@ static struct net_dma_desc_tx *current_tx_ptr;
 static struct net_dma_desc_tx *tx_desc;
 static struct net_dma_desc_rx *rx_desc;
 
-#if defined(CONFIG_BFIN_MAC_RMII)
-static u16 pin_req[] = P_RMII0;
-#else
-static u16 pin_req[] = P_MII0;
-#endif
-
 static void desc_list_free(void)
 {
 	struct net_dma_desc_rx *r;
@@ -347,23 +340,23 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 		}
 
 		if (phydev->speed != lp->old_speed) {
-#if defined(CONFIG_BFIN_MAC_RMII)
-			u32 opmode = bfin_read_EMAC_OPMODE();
-			switch (phydev->speed) {
-			case 10:
-				opmode |= RMII_10;
-				break;
-			case 100:
-				opmode &= ~(RMII_10);
-				break;
-			default:
-				printk(KERN_WARNING
-					"%s: Ack!  Speed (%d) is not 10/100!\n",
-					DRV_NAME, phydev->speed);
-				break;
+			if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+				u32 opmode = bfin_read_EMAC_OPMODE();
+				switch (phydev->speed) {
+				case 10:
+					opmode |= RMII_10;
+					break;
+				case 100:
+					opmode &= ~RMII_10;
+					break;
+				default:
+					printk(KERN_WARNING
+						"%s: Ack!  Speed (%d) is not 10/100!\n",
+						DRV_NAME, phydev->speed);
+					break;
+				}
+				bfin_write_EMAC_OPMODE(opmode);
 			}
-			bfin_write_EMAC_OPMODE(opmode);
-#endif
 
 			new_state = 1;
 			lp->old_speed = phydev->speed;
@@ -392,7 +385,7 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 /* MDC  = 2.5 MHz */
 #define MDC_CLK 2500000
 
-static int mii_probe(struct net_device *dev)
+static int mii_probe(struct net_device *dev, int phy_mode)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
@@ -411,8 +404,8 @@ static int mii_probe(struct net_device *dev)
 	sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
 	bfin_write_EMAC_SYSCTL(sysctl);
 
-	/* search for connect PHY device */
-	for (i = 0; i < PHY_MAX_ADDR; i++) {
+	/* search for connected PHY device */
+	for (i = 0; i < PHY_MAX_ADDR; ++i) {
 		struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
 
 		if (!tmp_phydev)
@@ -429,13 +422,14 @@ static int mii_probe(struct net_device *dev)
 		return -ENODEV;
 	}
 
-#if defined(CONFIG_BFIN_MAC_RMII)
-	phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
-			0, PHY_INTERFACE_MODE_RMII);
-#else
+	if (phy_mode != PHY_INTERFACE_MODE_RMII &&
+		phy_mode != PHY_INTERFACE_MODE_MII) {
+		printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
+		return -EINVAL;
+	}
+
 	phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
-			0, PHY_INTERFACE_MODE_MII);
-#endif
+			0, phy_mode);
 
 	if (IS_ERR(phydev)) {
 		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
@@ -570,6 +564,8 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
 /**************************************************************************/
 void setup_system_regs(struct net_device *dev)
 {
+	struct bfin_mac_local *lp = netdev_priv(dev);
+	int i;
 	unsigned short sysctl;
 
 	/*
@@ -577,6 +573,15 @@ void setup_system_regs(struct net_device *dev)
 	 * Configure checksum support and rcve frame word alignment
 	 */
 	sysctl = bfin_read_EMAC_SYSCTL();
+	/*
+	 * check if interrupt is requested for any PHY,
+	 * enable PHY interrupt only if needed
+	 */
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		if (lp->mii_bus->irq[i] != PHY_POLL)
+			break;
+	if (i < PHY_MAX_ADDR)
+		sysctl |= PHYIE;
 	sysctl |= RXDWA;
 #if defined(BFIN_MAC_CSUM_OFFLOAD)
 	sysctl |= RXCKS;
@@ -804,15 +809,14 @@ static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompa
 static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
 {
 	struct bfin_mac_local *lp = netdev_priv(netdev);
-	union skb_shared_tx *shtx = skb_tx(skb);
 
-	if (shtx->hardware) {
+	if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
 		int timeout_cnt = MAX_TIMEOUT_CNT;
 
 		/* When doing time stamping, keep the connection to the socket
 		 * a while longer
 		 */
-		shtx->in_progress = 1;
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 
 		/*
 		 * The timestamping is done at the EMAC module's MII/RMII interface
@@ -992,7 +996,6 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 	struct bfin_mac_local *lp = netdev_priv(dev);
 	u16 *data;
 	u32 data_align = (unsigned long)(skb->data) & 0x3;
-	union skb_shared_tx *shtx = skb_tx(skb);
 
 	current_tx_ptr->skb = skb;
 
@@ -1006,7 +1009,7 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 		 * of this field are the length of the packet payload in bytes and the higher
 		 * 4 bits are the timestamping enable field.
 		 */
-		if (shtx->hardware)
+		if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
 			*data |= 0x1000;
 
 		current_tx_ptr->desc_a.start_addr = (u32)data;
@@ -1016,7 +1019,7 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 	} else {
 		*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
 		/* enable timestamping for the sent packet */
-		if (shtx->hardware)
+		if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
 			*((u16 *)(current_tx_ptr->packet)) |= 0x1000;
 		memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
 			skb->len);
@@ -1205,7 +1208,7 @@ static void bfin_mac_disable(void)
 /*
  * Enable Interrupts, Receive, and Transmit
  */
-static int bfin_mac_enable(void)
+static int bfin_mac_enable(struct phy_device *phydev)
 {
 	int ret;
 	u32 opmode;
@@ -1235,12 +1238,13 @@ static int bfin_mac_enable(void)
 		opmode |= DRO | DC | PSF;
 	opmode |= RE;
 
-#if defined(CONFIG_BFIN_MAC_RMII)
-	opmode |= RMII; /* For Now only 100MBit are supported */
+	if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+		opmode |= RMII; /* For Now only 100MBit are supported */
 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
-	opmode |= TE;
-#endif
+		opmode |= TE;
 #endif
+	}
+
 	/* Turn on the EMAC rx */
 	bfin_write_EMAC_OPMODE(opmode);
 
@@ -1272,7 +1276,7 @@ static void bfin_mac_timeout(struct net_device *dev)
 	if (netif_queue_stopped(lp->ndev))
 		netif_wake_queue(lp->ndev);
 
-	bfin_mac_enable();
+	bfin_mac_enable(lp->phydev);
 
 	/* We can accept TX packets again */
 	dev->trans_start = jiffies; /* prevent tx timeout */
@@ -1344,11 +1348,19 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
 
 static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
+	struct bfin_mac_local *lp = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
 	switch (cmd) {
 	case SIOCSHWTSTAMP:
 		return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
 	default:
-		return -EOPNOTSUPP;
+		if (lp->phydev)
+			return phy_mii_ioctl(lp->phydev, ifr, cmd);
+		else
+			return -EOPNOTSUPP;
 	}
 }
 
@@ -1396,7 +1408,7 @@ static int bfin_mac_open(struct net_device *dev)
 	setup_mac_addr(dev->dev_addr);
 
 	bfin_mac_disable();
-	ret = bfin_mac_enable();
+	ret = bfin_mac_enable(lp->phydev);
 	if (ret)
 		return ret;
 	pr_debug("hardware init finished\n");
@@ -1452,6 +1464,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	struct net_device *ndev;
 	struct bfin_mac_local *lp;
 	struct platform_device *pd;
+	struct bfin_mii_bus_platform_data *mii_bus_data;
 	int rc;
 
 	ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
@@ -1503,11 +1516,12 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	if (!lp->mii_bus) {
 		dev_err(&pdev->dev, "Cannot get mii_bus!\n");
 		rc = -ENODEV;
-		goto out_err_mii_bus_probe;
+		goto out_err_probe_mac;
 	}
 	lp->mii_bus->priv = ndev;
+	mii_bus_data = pd->dev.platform_data;
 
-	rc = mii_probe(ndev);
+	rc = mii_probe(ndev, mii_bus_data->phy_mode);
 	if (rc) {
 		dev_err(&pdev->dev, "MII Probe failed!\n");
 		goto out_err_mii_probe;
@@ -1554,8 +1568,6 @@ out_err_request_irq:
 out_err_mii_probe:
 	mdiobus_unregister(lp->mii_bus);
 	mdiobus_free(lp->mii_bus);
-out_err_mii_bus_probe:
-	peripheral_free_list(pin_req);
 out_err_probe_mac:
 	platform_set_drvdata(pdev, NULL);
 	free_netdev(ndev);
@@ -1578,8 +1590,6 @@ static int __devexit bfin_mac_remove(struct platform_device *pdev)
 
 	free_netdev(ndev);
 
-	peripheral_free_list(pin_req);
-
 	return 0;
 }
 
@@ -1625,12 +1635,21 @@ static int bfin_mac_resume(struct platform_device *pdev)
 static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 {
 	struct mii_bus *miibus;
+	struct bfin_mii_bus_platform_data *mii_bus_pd;
+	const unsigned short *pin_req;
 	int rc, i;
 
+	mii_bus_pd = dev_get_platdata(&pdev->dev);
+	if (!mii_bus_pd) {
+		dev_err(&pdev->dev, "No peripherals in platform data!\n");
+		return -EINVAL;
+	}
+
 	/*
 	 * We are setting up a network card,
 	 * so set the GPIO pins to Ethernet mode
 	 */
+	pin_req = mii_bus_pd->mac_peripherals;
 	rc = peripheral_request_list(pin_req, DRV_NAME);
 	if (rc) {
 		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
@@ -1647,13 +1666,30 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 
 	miibus->parent = &pdev->dev;
 	miibus->name = "bfin_mii_bus";
+	miibus->phy_mask = mii_bus_pd->phy_mask;
+
 	snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
 	miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-	if (miibus->irq == NULL)
-		goto out_err_alloc;
-	for (i = 0; i < PHY_MAX_ADDR; ++i)
+	if (!miibus->irq)
+		goto out_err_irq_alloc;
+
+	for (i = rc; i < PHY_MAX_ADDR; ++i)
 		miibus->irq[i] = PHY_POLL;
 
+	rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
+	if (rc != mii_bus_pd->phydev_number)
+		dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
+			mii_bus_pd->phydev_number);
+	for (i = 0; i < rc; ++i) {
+		unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
+		if (phyaddr < PHY_MAX_ADDR)
+			miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
+		else
+			dev_err(&pdev->dev,
+				"Invalid PHY address %i for phydev %i\n",
+				phyaddr, i);
+	}
+
 	rc = mdiobus_register(miibus);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
@@ -1665,6 +1701,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 
 out_err_mdiobus_register:
 	kfree(miibus->irq);
+out_err_irq_alloc:
 	mdiobus_free(miibus);
 out_err_alloc:
 	peripheral_free_list(pin_req);
@@ -1675,11 +1712,15 @@ out_err_alloc:
 static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
 {
 	struct mii_bus *miibus = platform_get_drvdata(pdev);
+	struct bfin_mii_bus_platform_data *mii_bus_pd =
+		dev_get_platdata(&pdev->dev);
+
 	platform_set_drvdata(pdev, NULL);
 	mdiobus_unregister(miibus);
 	kfree(miibus->irq);
 	mdiobus_free(miibus);
-	peripheral_free_list(pin_req);
+	peripheral_free_list(mii_bus_pd->mac_peripherals);
+
 	return 0;
 }