aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/ucb1x00-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/ucb1x00-core.c')
-rw-r--r--drivers/mfd/ucb1x00-core.c665
1 files changed, 665 insertions, 0 deletions
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
new file mode 100644
index 00000000000..10f6ce1bc0a
--- /dev/null
+++ b/drivers/mfd/ucb1x00-core.c
@@ -0,0 +1,665 @@
+/*
+ * linux/drivers/mfd/ucb1x00-core.c
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * The UCB1x00 core driver provides basic services for handling IO,
+ * the ADC, interrupts, and accessing registers. It is designed
+ * such that everything goes through this layer, thereby providing
+ * a consistent locking methodology, as well as allowing the drivers
+ * to be used on other non-MCP-enabled hardware platforms.
+ *
+ * Note that all locks are private to this file. Nothing else may
+ * touch them.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include "ucb1x00.h"
+
+static DECLARE_MUTEX(ucb1x00_sem);
+static LIST_HEAD(ucb1x00_drivers);
+static LIST_HEAD(ucb1x00_devices);
+
+/**
+ * ucb1x00_io_set_dir - set IO direction
+ * @ucb: UCB1x00 structure describing chip
+ * @in: bitfield of IO pins to be set as inputs
+ * @out: bitfield of IO pins to be set as outputs
+ *
+ * Set the IO direction of the ten general purpose IO pins on
+ * the UCB1x00 chip. The @in bitfield has priority over the
+ * @out bitfield, in that if you specify a pin as both input
+ * and output, it will end up as an input.
+ *
+ * ucb1x00_enable must have been called to enable the comms
+ * before using this function.
+ *
+ * This function takes a spinlock, disabling interrupts.
+ */
+void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int in, unsigned int out)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir |= out;
+ ucb->io_dir &= ~in;
+
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+/**
+ * ucb1x00_io_write - set or clear IO outputs
+ * @ucb: UCB1x00 structure describing chip
+ * @set: bitfield of IO pins to set to logic '1'
+ * @clear: bitfield of IO pins to set to logic '0'
+ *
+ * Set the IO output state of the specified IO pins. The value
+ * is retained if the pins are subsequently configured as inputs.
+ * The @clear bitfield has priority over the @set bitfield -
+ * outputs will be cleared.
+ *
+ * ucb1x00_enable must have been called to enable the comms
+ * before using this function.
+ *
+ * This function takes a spinlock, disabling interrupts.
+ */
+void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_out |= set;
+ ucb->io_out &= ~clear;
+
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+/**
+ * ucb1x00_io_read - read the current state of the IO pins
+ * @ucb: UCB1x00 structure describing chip
+ *
+ * Return a bitfield describing the logic state of the ten
+ * general purpose IO pins.
+ *
+ * ucb1x00_enable must have been called to enable the comms
+ * before using this function.
+ *
+ * This function does not take any semaphores or spinlocks.
+ */
+unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
+{
+ return ucb1x00_reg_read(ucb, UCB_IO_DATA);
+}
+
+/*
+ * UCB1300 data sheet says we must:
+ * 1. enable ADC => 5us (including reference startup time)
+ * 2. select input => 51*tsibclk => 4.3us
+ * 3. start conversion => 102*tsibclk => 8.5us
+ * (tsibclk = 1/11981000)
+ * Period between SIB 128-bit frames = 10.7us
+ */
+
+/**
+ * ucb1x00_adc_enable - enable the ADC converter
+ * @ucb: UCB1x00 structure describing chip
+ *
+ * Enable the ucb1x00 and ADC converter on the UCB1x00 for use.
+ * Any code wishing to use the ADC converter must call this
+ * function prior to using it.
+ *
+ * This function takes the ADC semaphore to prevent two or more
+ * concurrent uses, and therefore may sleep. As a result, it
+ * can only be called from process context, not interrupt
+ * context.
+ *
+ * You should release the ADC as soon as possible using
+ * ucb1x00_adc_disable.
+ */
+void ucb1x00_adc_enable(struct ucb1x00 *ucb)
+{
+ down(&ucb->adc_sem);
+
+ ucb->adc_cr |= UCB_ADC_ENA;
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
+}
+
+/**
+ * ucb1x00_adc_read - read the specified ADC channel
+ * @ucb: UCB1x00 structure describing chip
+ * @adc_channel: ADC channel mask
+ * @sync: wait for syncronisation pulse.
+ *
+ * Start an ADC conversion and wait for the result. Note that
+ * synchronised ADC conversions (via the ADCSYNC pin) must wait
+ * until the trigger is asserted and the conversion is finished.
+ *
+ * This function currently spins waiting for the conversion to
+ * complete (2 frames max without sync).
+ *
+ * If called for a synchronised ADC conversion, it may sleep
+ * with the ADC semaphore held.
+ */
+unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
+{
+ unsigned int val;
+
+ if (sync)
+ adc_channel |= UCB_ADC_SYNC_ENA;
+
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel | UCB_ADC_START);
+
+ for (;;) {
+ val = ucb1x00_reg_read(ucb, UCB_ADC_DATA);
+ if (val & UCB_ADC_DAT_VAL)
+ break;
+ /* yield to other processes */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ return UCB_ADC_DAT(val);
+}
+
+/**
+ * ucb1x00_adc_disable - disable the ADC converter
+ * @ucb: UCB1x00 structure describing chip
+ *
+ * Disable the ADC converter and release the ADC semaphore.
+ */
+void ucb1x00_adc_disable(struct ucb1x00 *ucb)
+{
+ ucb->adc_cr &= ~UCB_ADC_ENA;
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
+ ucb1x00_disable(ucb);
+
+ up(&ucb->adc_sem);
+}
+
+/*
+ * UCB1x00 Interrupt handling.
+ *
+ * The UCB1x00 can generate interrupts when the SIBCLK is stopped.
+ * Since we need to read an internal register, we must re-enable
+ * SIBCLK to talk to the chip. We leave the clock running until
+ * we have finished processing all interrupts from the chip.
+ */
+static irqreturn_t ucb1x00_irq(int irqnr, void *devid, struct pt_regs *regs)
+{
+ struct ucb1x00 *ucb = devid;
+ struct ucb1x00_irq *irq;
+ unsigned int isr, i;
+
+ ucb1x00_enable(ucb);
+ isr = ucb1x00_reg_read(ucb, UCB_IE_STATUS);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
+ if (isr & 1 && irq->fn)
+ irq->fn(i, irq->devid);
+ ucb1x00_disable(ucb);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ucb1x00_hook_irq - hook a UCB1x00 interrupt
+ * @ucb: UCB1x00 structure describing chip
+ * @idx: interrupt index
+ * @fn: function to call when interrupt is triggered
+ * @devid: device id to pass to interrupt handler
+ *
+ * Hook the specified interrupt. You can only register one handler
+ * for each interrupt source. The interrupt source is not enabled
+ * by this function; use ucb1x00_enable_irq instead.
+ *
+ * Interrupt handlers will be called with other interrupts enabled.
+ *
+ * Returns zero on success, or one of the following errors:
+ * -EINVAL if the interrupt index is invalid
+ * -EBUSY if the interrupt has already been hooked
+ */
+int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
+{
+ struct ucb1x00_irq *irq;
+ int ret = -EINVAL;
+
+ if (idx < 16) {
+ irq = ucb->irq_handler + idx;
+ ret = -EBUSY;
+
+ spin_lock_irq(&ucb->lock);
+ if (irq->fn == NULL) {
+ irq->devid = devid;
+ irq->fn = fn;
+ ret = 0;
+ }
+ spin_unlock_irq(&ucb->lock);
+ }
+ return ret;
+}
+
+/**
+ * ucb1x00_enable_irq - enable an UCB1x00 interrupt source
+ * @ucb: UCB1x00 structure describing chip
+ * @idx: interrupt index
+ * @edges: interrupt edges to enable
+ *
+ * Enable the specified interrupt to trigger on %UCB_RISING,
+ * %UCB_FALLING or both edges. The interrupt should have been
+ * hooked by ucb1x00_hook_irq.
+ */
+void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+{
+ unsigned long flags;
+
+ if (idx < 16) {
+ spin_lock_irqsave(&ucb->lock, flags);
+
+ ucb1x00_enable(ucb);
+ if (edges & UCB_RISING) {
+ ucb->irq_ris_enbl |= 1 << idx;
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+ }
+ if (edges & UCB_FALLING) {
+ ucb->irq_fal_enbl |= 1 << idx;
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+ }
+ ucb1x00_disable(ucb);
+ spin_unlock_irqrestore(&ucb->lock, flags);
+ }
+}
+
+/**
+ * ucb1x00_disable_irq - disable an UCB1x00 interrupt source
+ * @ucb: UCB1x00 structure describing chip
+ * @edges: interrupt edges to disable
+ *
+ * Disable the specified interrupt triggering on the specified
+ * (%UCB_RISING, %UCB_FALLING or both) edges.
+ */
+void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+{
+ unsigned long flags;
+
+ if (idx < 16) {
+ spin_lock_irqsave(&ucb->lock, flags);
+
+ ucb1x00_enable(ucb);
+ if (edges & UCB_RISING) {
+ ucb->irq_ris_enbl &= ~(1 << idx);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+ }
+ if (edges & UCB_FALLING) {
+ ucb->irq_fal_enbl &= ~(1 << idx);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+ }
+ ucb1x00_disable(ucb);
+ spin_unlock_irqrestore(&ucb->lock, flags);
+ }
+}
+
+/**
+ * ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
+ * @ucb: UCB1x00 structure describing chip
+ * @idx: interrupt index
+ * @devid: device id.
+ *
+ * Disable the interrupt source and remove the handler. devid must
+ * match the devid passed when hooking the interrupt.
+ *
+ * Returns zero on success, or one of the following errors:
+ * -EINVAL if the interrupt index is invalid
+ * -ENOENT if devid does not match
+ */
+int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
+{
+ struct ucb1x00_irq *irq;
+ int ret;
+
+ if (idx >= 16)
+ goto bad;
+
+ irq = ucb->irq_handler + idx;
+ ret = -ENOENT;
+
+ spin_lock_irq(&ucb->lock);
+ if (irq->devid == devid) {
+ ucb->irq_ris_enbl &= ~(1 << idx);
+ ucb->irq_fal_enbl &= ~(1 << idx);
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+ ucb1x00_disable(ucb);
+
+ irq->fn = NULL;
+ irq->devid = NULL;
+ ret = 0;
+ }
+ spin_unlock_irq(&ucb->lock);
+ return ret;
+
+bad:
+ printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
+ return -EINVAL;
+}
+
+static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
+{
+ struct ucb1x00_dev *dev;
+ int ret = -ENOMEM;
+
+ dev = kmalloc(sizeof(struct ucb1x00_dev), GFP_KERNEL);
+ if (dev) {
+ dev->ucb = ucb;
+ dev->drv = drv;
+
+ ret = drv->add(dev);
+
+ if (ret == 0) {
+ list_add(&dev->dev_node, &ucb->devs);
+ list_add(&dev->drv_node, &drv->devs);
+ } else {
+ kfree(dev);
+ }
+ }
+ return ret;
+}
+
+static void ucb1x00_remove_dev(struct ucb1x00_dev *dev)
+{
+ dev->drv->remove(dev);
+ list_del(&dev->dev_node);
+ list_del(&dev->drv_node);
+ kfree(dev);
+}
+
+/*
+ * Try to probe our interrupt, rather than relying on lots of
+ * hard-coded machine dependencies. For reference, the expected
+ * IRQ mappings are:
+ *
+ * Machine Default IRQ
+ * adsbitsy IRQ_GPCIN4
+ * cerf IRQ_GPIO_UCB1200_IRQ
+ * flexanet IRQ_GPIO_GUI
+ * freebird IRQ_GPIO_FREEBIRD_UCB1300_IRQ
+ * graphicsclient ADS_EXT_IRQ(8)
+ * graphicsmaster ADS_EXT_IRQ(8)
+ * lart LART_IRQ_UCB1200
+ * omnimeter IRQ_GPIO23
+ * pfs168 IRQ_GPIO_UCB1300_IRQ
+ * simpad IRQ_GPIO_UCB1300_IRQ
+ * shannon SHANNON_IRQ_GPIO_IRQ_CODEC
+ * yopy IRQ_GPIO_UCB1200_IRQ
+ */
+static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
+{
+ unsigned long mask;
+
+ mask = probe_irq_on();
+ if (!mask)
+ return NO_IRQ;
+
+ /*
+ * Enable the ADC interrupt.
+ */
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ /*
+ * Cause an ADC interrupt.
+ */
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+
+ /*
+ * Wait for the conversion to complete.
+ */
+ while ((ucb1x00_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VAL) == 0);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, 0);
+
+ /*
+ * Disable and clear interrupt.
+ */
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, 0);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, 0);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ /*
+ * Read triggered interrupt.
+ */
+ return probe_irq_off(mask);
+}
+
+static int ucb1x00_probe(struct mcp *mcp)
+{
+ struct ucb1x00 *ucb;
+ struct ucb1x00_driver *drv;
+ unsigned int id;
+ int ret = -ENODEV;
+
+ mcp_enable(mcp);
+ id = mcp_reg_read(mcp, UCB_ID);
+
+ if (id != UCB_ID_1200 && id != UCB_ID_1300) {
+ printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
+ goto err_disable;
+ }
+
+ ucb = kmalloc(sizeof(struct ucb1x00), GFP_KERNEL);
+ ret = -ENOMEM;
+ if (!ucb)
+ goto err_disable;
+
+ memset(ucb, 0, sizeof(struct ucb1x00));
+
+ ucb->cdev.class = &ucb1x00_class;
+ ucb->cdev.dev = &mcp->attached_device;
+ strlcpy(ucb->cdev.class_id, "ucb1x00", sizeof(ucb->cdev.class_id));
+
+ spin_lock_init(&ucb->lock);
+ spin_lock_init(&ucb->io_lock);
+ sema_init(&ucb->adc_sem, 1);
+
+ ucb->id = id;
+ ucb->mcp = mcp;
+ ucb->irq = ucb1x00_detect_irq(ucb);
+ if (ucb->irq == NO_IRQ) {
+ printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ ret = request_irq(ucb->irq, ucb1x00_irq, 0, "UCB1x00", ucb);
+ if (ret) {
+ printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+ ucb->irq, ret);
+ goto err_free;
+ }
+
+ set_irq_type(ucb->irq, IRQT_RISING);
+ mcp_set_drvdata(mcp, ucb);
+
+ ret = class_device_register(&ucb->cdev);
+ if (ret)
+ goto err_irq;
+
+ INIT_LIST_HEAD(&ucb->devs);
+ down(&ucb1x00_sem);
+ list_add(&ucb->node, &ucb1x00_devices);
+ list_for_each_entry(drv, &ucb1x00_drivers, node) {
+ ucb1x00_add_dev(ucb, drv);
+ }
+ up(&ucb1x00_sem);
+ goto out;
+
+ err_irq:
+ free_irq(ucb->irq, ucb);
+ err_free:
+ kfree(ucb);
+ err_disable:
+ mcp_disable(mcp);
+ out:
+ return ret;
+}
+
+static void ucb1x00_remove(struct mcp *mcp)
+{
+ struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
+ struct list_head *l, *n;
+
+ down(&ucb1x00_sem);
+ list_del(&ucb->node);
+ list_for_each_safe(l, n, &ucb->devs) {
+ struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, dev_node);
+ ucb1x00_remove_dev(dev);
+ }
+ up(&ucb1x00_sem);
+
+ free_irq(ucb->irq, ucb);
+ class_device_unregister(&ucb->cdev);
+}
+
+static void ucb1x00_release(struct class_device *dev)
+{
+ struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
+ kfree(ucb);
+}
+
+static struct class ucb1x00_class = {
+ .name = "ucb1x00",
+ .release = ucb1x00_release,
+};
+
+int ucb1x00_register_driver(struct ucb1x00_driver *drv)
+{
+ struct ucb1x00 *ucb;
+
+ INIT_LIST_HEAD(&drv->devs);
+ down(&ucb1x00_sem);
+ list_add(&drv->node, &ucb1x00_drivers);
+ list_for_each_entry(ucb, &ucb1x00_devices, node) {
+ ucb1x00_add_dev(ucb, drv);
+ }
+ up(&ucb1x00_sem);
+ return 0;
+}
+
+void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
+{
+ struct list_head *n, *l;
+
+ down(&ucb1x00_sem);
+ list_del(&drv->node);
+ list_for_each_safe(l, n, &drv->devs) {
+ struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, drv_node);
+ ucb1x00_remove_dev(dev);
+ }
+ up(&ucb1x00_sem);
+}
+
+static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state)
+{
+ struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
+ struct ucb1x00_dev *dev;
+
+ down(&ucb1x00_sem);
+ list_for_each_entry(dev, &ucb->devs, dev_node) {
+ if (dev->drv->suspend)
+ dev->drv->suspend(dev, state);
+ }
+ up(&ucb1x00_sem);
+ return 0;
+}
+
+static int ucb1x00_resume(struct mcp *mcp)
+{
+ struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
+ struct ucb1x00_dev *dev;
+
+ down(&ucb1x00_sem);
+ list_for_each_entry(dev, &ucb->devs, dev_node) {
+ if (dev->drv->resume)
+ dev->drv->resume(dev);
+ }
+ up(&ucb1x00_sem);
+ return 0;
+}
+
+static struct mcp_driver ucb1x00_driver = {
+ .drv = {
+ .name = "ucb1x00",
+ },
+ .probe = ucb1x00_probe,
+ .remove = ucb1x00_remove,
+ .suspend = ucb1x00_suspend,
+ .resume = ucb1x00_resume,
+};
+
+static int __init ucb1x00_init(void)
+{
+ int ret = class_register(&ucb1x00_class);
+ if (ret == 0) {
+ ret = mcp_driver_register(&ucb1x00_driver);
+ if (ret)
+ class_unregister(&ucb1x00_class);
+ }
+ return ret;
+}
+
+static void __exit ucb1x00_exit(void)
+{
+ mcp_driver_unregister(&ucb1x00_driver);
+ class_unregister(&ucb1x00_class);
+}
+
+module_init(ucb1x00_init);
+module_exit(ucb1x00_exit);
+
+EXPORT_SYMBOL(ucb1x00_class);
+
+EXPORT_SYMBOL(ucb1x00_io_set_dir);
+EXPORT_SYMBOL(ucb1x00_io_write);
+EXPORT_SYMBOL(ucb1x00_io_read);
+
+EXPORT_SYMBOL(ucb1x00_adc_enable);
+EXPORT_SYMBOL(ucb1x00_adc_read);
+EXPORT_SYMBOL(ucb1x00_adc_disable);
+
+EXPORT_SYMBOL(ucb1x00_hook_irq);
+EXPORT_SYMBOL(ucb1x00_free_irq);
+EXPORT_SYMBOL(ucb1x00_enable_irq);
+EXPORT_SYMBOL(ucb1x00_disable_irq);
+
+EXPORT_SYMBOL(ucb1x00_register_driver);
+EXPORT_SYMBOL(ucb1x00_unregister_driver);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("UCB1x00 core driver");
+MODULE_LICENSE("GPL");