diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7220.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_iba7220.c | 4618 |
1 files changed, 4618 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c new file mode 100644 index 00000000000..6fd8d74e739 --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -0,0 +1,4618 @@ +/* + * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation. + * All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* + * This file contains all of the code that is specific to the + * QLogic_IB 7220 chip (except that specific to the SerDes) + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <rdma/ib_verbs.h> + +#include "qib.h" +#include "qib_7220.h" + +static void qib_setup_7220_setextled(struct qib_pportdata *, u32); +static void qib_7220_handle_hwerrors(struct qib_devdata *, char *, size_t); +static void sendctrl_7220_mod(struct qib_pportdata *ppd, u32 op); +static u32 qib_7220_iblink_state(u64); +static u8 qib_7220_phys_portstate(u64); +static void qib_sdma_update_7220_tail(struct qib_pportdata *, u16); +static void qib_set_ib_7220_lstate(struct qib_pportdata *, u16, u16); + +/* + * This file contains almost all the chip-specific register information and + * access functions for the QLogic QLogic_IB 7220 PCI-Express chip, with the + * exception of SerDes support, which in in qib_sd7220.c. + */ + +/* Below uses machine-generated qib_chipnum_regs.h file */ +#define KREG_IDX(regname) (QIB_7220_##regname##_OFFS / sizeof(u64)) + +/* Use defines to tie machine-generated names to lower-case names */ +#define kr_control KREG_IDX(Control) +#define kr_counterregbase KREG_IDX(CntrRegBase) +#define kr_errclear KREG_IDX(ErrClear) +#define kr_errmask KREG_IDX(ErrMask) +#define kr_errstatus KREG_IDX(ErrStatus) +#define kr_extctrl KREG_IDX(EXTCtrl) +#define kr_extstatus KREG_IDX(EXTStatus) +#define kr_gpio_clear KREG_IDX(GPIOClear) +#define kr_gpio_mask KREG_IDX(GPIOMask) +#define kr_gpio_out KREG_IDX(GPIOOut) +#define kr_gpio_status KREG_IDX(GPIOStatus) +#define kr_hrtbt_guid KREG_IDX(HRTBT_GUID) +#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) +#define kr_hwerrclear KREG_IDX(HwErrClear) +#define kr_hwerrmask KREG_IDX(HwErrMask) +#define kr_hwerrstatus KREG_IDX(HwErrStatus) +#define kr_ibcctrl KREG_IDX(IBCCtrl) +#define kr_ibcddrctrl KREG_IDX(IBCDDRCtrl) +#define kr_ibcddrstatus KREG_IDX(IBCDDRStatus) +#define kr_ibcstatus KREG_IDX(IBCStatus) +#define kr_ibserdesctrl KREG_IDX(IBSerDesCtrl) +#define kr_intclear KREG_IDX(IntClear) +#define kr_intmask KREG_IDX(IntMask) +#define kr_intstatus KREG_IDX(IntStatus) +#define kr_ncmodectrl KREG_IDX(IBNCModeCtrl) +#define kr_palign KREG_IDX(PageAlign) +#define kr_partitionkey KREG_IDX(RcvPartitionKey) +#define kr_portcnt KREG_IDX(PortCnt) +#define kr_rcvbthqp KREG_IDX(RcvBTHQP) +#define kr_rcvctrl KREG_IDX(RcvCtrl) +#define kr_rcvegrbase KREG_IDX(RcvEgrBase) +#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) +#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) +#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) +#define kr_rcvhdrsize KREG_IDX(RcvHdrSize) +#define kr_rcvpktledcnt KREG_IDX(RcvPktLEDCnt) +#define kr_rcvtidbase KREG_IDX(RcvTIDBase) +#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) +#define kr_revision KREG_IDX(Revision) +#define kr_scratch KREG_IDX(Scratch) +#define kr_sendbuffererror KREG_IDX(SendBufErr0) +#define kr_sendctrl KREG_IDX(SendCtrl) +#define kr_senddmabase KREG_IDX(SendDmaBase) +#define kr_senddmabufmask0 KREG_IDX(SendDmaBufMask0) +#define kr_senddmabufmask1 (KREG_IDX(SendDmaBufMask0) + 1) +#define kr_senddmabufmask2 (KREG_IDX(SendDmaBufMask0) + 2) +#define kr_senddmahead KREG_IDX(SendDmaHead) +#define kr_senddmaheadaddr KREG_IDX(SendDmaHeadAddr) +#define kr_senddmalengen KREG_IDX(SendDmaLenGen) +#define kr_senddmastatus KREG_IDX(SendDmaStatus) +#define kr_senddmatail KREG_IDX(SendDmaTail) +#define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) +#define kr_sendpiobufbase KREG_IDX(SendBufBase) +#define kr_sendpiobufcnt KREG_IDX(SendBufCnt) +#define kr_sendpiosize KREG_IDX(SendBufSize) +#define kr_sendregbase KREG_IDX(SendRegBase) +#define kr_userregbase KREG_IDX(UserRegBase) +#define kr_xgxs_cfg KREG_IDX(XGXSCfg) + +/* These must only be written via qib_write_kreg_ctxt() */ +#define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0) +#define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) + + +#define CREG_IDX(regname) ((QIB_7220_##regname##_OFFS - \ + QIB_7220_LBIntCnt_OFFS) / sizeof(u64)) + +#define cr_badformat CREG_IDX(RxVersionErrCnt) +#define cr_erricrc CREG_IDX(RxICRCErrCnt) +#define cr_errlink CREG_IDX(RxLinkMalformCnt) +#define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt) +#define cr_errpkey CREG_IDX(RxPKeyMismatchCnt) +#define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlViolCnt) +#define cr_err_rlen CREG_IDX(RxLenErrCnt) +#define cr_errslen CREG_IDX(TxLenErrCnt) +#define cr_errtidfull CREG_IDX(RxTIDFullErrCnt) +#define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt) +#define cr_errvcrc CREG_IDX(RxVCRCErrCnt) +#define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt) +#define cr_lbint CREG_IDX(LBIntCnt) +#define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) +#define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt) +#define cr_lbflowstall CREG_IDX(LBFlowStallCnt) +#define cr_pktrcv CREG_IDX(RxDataPktCnt) +#define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) +#define cr_pktsend CREG_IDX(TxDataPktCnt) +#define cr_pktsendflow CREG_IDX(TxFlowPktCnt) +#define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt) +#define cr_rcvebp CREG_IDX(RxEBPCnt) +#define cr_rcvovfl CREG_IDX(RxBufOvflCnt) +#define cr_senddropped CREG_IDX(TxDroppedPktCnt) +#define cr_sendstall CREG_IDX(TxFlowStallCnt) +#define cr_sendunderrun CREG_IDX(TxUnderrunCnt) +#define cr_wordrcv CREG_IDX(RxDwordCnt) +#define cr_wordsend CREG_IDX(TxDwordCnt) +#define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt) +#define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt) +#define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) +#define cr_iblinkdown CREG_IDX(IBLinkDownedCnt) +#define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt) +#define cr_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) +#define cr_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) +#define cr_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) +#define cr_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) +#define cr_rxvlerr CREG_IDX(RxVlErrCnt) +#define cr_rxdlidfltr CREG_IDX(RxDlidFltrCnt) +#define cr_psstat CREG_IDX(PSStat) +#define cr_psstart CREG_IDX(PSStart) +#define cr_psinterval CREG_IDX(PSInterval) +#define cr_psrcvdatacount CREG_IDX(PSRcvDataCount) +#define cr_psrcvpktscount CREG_IDX(PSRcvPktsCount) +#define cr_psxmitdatacount CREG_IDX(PSXmitDataCount) +#define cr_psxmitpktscount CREG_IDX(PSXmitPktsCount) +#define cr_psxmitwaitcount CREG_IDX(PSXmitWaitCount) +#define cr_txsdmadesc CREG_IDX(TxSDmaDescCnt) +#define cr_pcieretrydiag CREG_IDX(PcieRetryBufDiagQwordCnt) + +#define SYM_RMASK(regname, fldname) ((u64) \ + QIB_7220_##regname##_##fldname##_RMASK) +#define SYM_MASK(regname, fldname) ((u64) \ + QIB_7220_##regname##_##fldname##_RMASK << \ + QIB_7220_##regname##_##fldname##_LSB) +#define SYM_LSB(regname, fldname) (QIB_7220_##regname##_##fldname##_LSB) +#define SYM_FIELD(value, regname, fldname) ((u64) \ + (((value) >> SYM_LSB(regname, fldname)) & \ + SYM_RMASK(regname, fldname))) +#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) +#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) + +/* ibcctrl bits */ +#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 +/* cycle through TS1/TS2 till OK */ +#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 +/* wait for TS1, then go on */ +#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 +#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 + +#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ +#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ +#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ + +#define BLOB_7220_IBCHG 0x81 + +/* + * We could have a single register get/put routine, that takes a group type, + * but this is somewhat clearer and cleaner. It also gives us some error + * checking. 64 bit register reads should always work, but are inefficient + * on opteron (the northbridge always generates 2 separate HT 32 bit reads), + * so we use kreg32 wherever possible. User register and counter register + * reads are always 32 bit reads, so only one form of those routines. + */ + +/** + * qib_read_ureg32 - read 32-bit virtualized per-context register + * @dd: device + * @regno: register number + * @ctxt: context number + * + * Return the contents of a register that is virtualized to be per context. + * Returns -1 on errors (not distinguishable from valid contents at + * runtime; we may add a separate error variable at some point). + */ +static inline u32 qib_read_ureg32(const struct qib_devdata *dd, + enum qib_ureg regno, int ctxt) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return 0; + + if (dd->userbase) + return readl(regno + (u64 __iomem *) + ((char __iomem *)dd->userbase + + dd->ureg_align * ctxt)); + else + return readl(regno + (u64 __iomem *) + (dd->uregbase + + (char __iomem *)dd->kregbase + + dd->ureg_align * ctxt)); +} + +/** + * qib_write_ureg - write 32-bit virtualized per-context register + * @dd: device + * @regno: register number + * @value: value + * @ctxt: context + * + * Write the contents of a register that is virtualized to be per context. + */ +static inline void qib_write_ureg(const struct qib_devdata *dd, + enum qib_ureg regno, u64 value, int ctxt) +{ + u64 __iomem *ubase; + + if (dd->userbase) + ubase = (u64 __iomem *) + ((char __iomem *) dd->userbase + + dd->ureg_align * ctxt); + else + ubase = (u64 __iomem *) + (dd->uregbase + + (char __iomem *) dd->kregbase + + dd->ureg_align * ctxt); + + if (dd->kregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &ubase[regno]); +} + +/** + * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register + * @dd: the qlogic_ib device + * @regno: the register number to write + * @ctxt: the context containing the register + * @value: the value to write + */ +static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, + const u16 regno, unsigned ctxt, + u64 value) +{ + qib_write_kreg(dd, regno + ctxt, value); +} + +static inline void write_7220_creg(const struct qib_devdata *dd, + u16 regno, u64 value) +{ + if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &dd->cspec->cregbase[regno]); +} + +static inline u64 read_7220_creg(const struct qib_devdata *dd, u16 regno) +{ + if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readq(&dd->cspec->cregbase[regno]); +} + +static inline u32 read_7220_creg32(const struct qib_devdata *dd, u16 regno) +{ + if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readl(&dd->cspec->cregbase[regno]); +} + +/* kr_revision bits */ +#define QLOGIC_IB_R_EMULATORREV_MASK ((1ULL << 22) - 1) +#define QLOGIC_IB_R_EMULATORREV_SHIFT 40 + +/* kr_control bits */ +#define QLOGIC_IB_C_RESET (1U << 7) + +/* kr_intstatus, kr_intclear, kr_intmask bits */ +#define QLOGIC_IB_I_RCVURG_MASK ((1ULL << 17) - 1) +#define QLOGIC_IB_I_RCVURG_SHIFT 32 +#define QLOGIC_IB_I_RCVAVAIL_MASK ((1ULL << 17) - 1) +#define QLOGIC_IB_I_RCVAVAIL_SHIFT 0 +#define QLOGIC_IB_I_SERDESTRIMDONE (1ULL << 27) + +#define QLOGIC_IB_C_FREEZEMODE 0x00000002 +#define QLOGIC_IB_C_LINKENABLE 0x00000004 + +#define QLOGIC_IB_I_SDMAINT 0x8000000000000000ULL +#define QLOGIC_IB_I_SDMADISABLED 0x4000000000000000ULL +#define QLOGIC_IB_I_ERROR 0x0000000080000000ULL +#define QLOGIC_IB_I_SPIOSENT 0x0000000040000000ULL +#define QLOGIC_IB_I_SPIOBUFAVAIL 0x0000000020000000ULL +#define QLOGIC_IB_I_GPIO 0x0000000010000000ULL + +/* variables for sanity checking interrupt and errors */ +#define QLOGIC_IB_I_BITSEXTANT \ + (QLOGIC_IB_I_SDMAINT | QLOGIC_IB_I_SDMADISABLED | \ + (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \ + (QLOGIC_IB_I_RCVAVAIL_MASK << \ + QLOGIC_IB_I_RCVAVAIL_SHIFT) | \ + QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \ + QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO | \ + QLOGIC_IB_I_SERDESTRIMDONE) + +#define IB_HWE_BITSEXTANT \ + (HWE_MASK(RXEMemParityErr) | \ + HWE_MASK(TXEMemParityErr) | \ + (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << \ + QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) | \ + QLOGIC_IB_HWE_PCIE1PLLFAILED | \ + QLOGIC_IB_HWE_PCIE0PLLFAILED | \ + QLOGIC_IB_HWE_PCIEPOISONEDTLP | \ + QLOGIC_IB_HWE_PCIECPLTIMEOUT | \ + QLOGIC_IB_HWE_PCIEBUSPARITYXTLH | \ + QLOGIC_IB_HWE_PCIEBUSPARITYXADM | \ + QLOGIC_IB_HWE_PCIEBUSPARITYRADM | \ + HWE_MASK(PowerOnBISTFailed) | \ + QLOGIC_IB_HWE_COREPLL_FBSLIP | \ + QLOGIC_IB_HWE_COREPLL_RFSLIP | \ + QLOGIC_IB_HWE_SERDESPLLFAILED | \ + HWE_MASK(IBCBusToSPCParityErr) | \ + HWE_MASK(IBCBusFromSPCParityErr) | \ + QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR | \ + QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR | \ + QLOGIC_IB_HWE_SDMAMEMREADERR | \ + QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED | \ + QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT | \ + QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT | \ + QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT | \ + QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT | \ + QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR | \ + QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR | \ + QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR | \ + QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR) + +#define IB_E_BITSEXTANT \ + (ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) | \ + ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) | \ + ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) | \ + ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \ + ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) | \ + ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) | \ + ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | \ + ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) | \ + ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) | \ + ERR_MASK(SendSpecialTriggerErr) | \ + ERR_MASK(SDmaDisabledErr) | ERR_MASK(SendMinPktLenErr) | \ + ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnderRunErr) | \ + ERR_MASK(SendPktLenErr) | ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(SendPioArmLaunchErr) | \ + ERR_MASK(SendUnexpectedPktNumErr) | \ + ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(SendBufMisuseErr) | \ + ERR_MASK(SDmaGenMismatchErr) | ERR_MASK(SDmaOutOfBoundErr) | \ + ERR_MASK(SDmaTailOutOfBoundErr) | ERR_MASK(SDmaBaseErr) | \ + ERR_MASK(SDma1stDescErr) | ERR_MASK(SDmaRpyTagErr) | \ + ERR_MASK(SDmaDwEnErr) | ERR_MASK(SDmaMissingDwErr) | \ + ERR_MASK(SDmaUnexpDataErr) | \ + ERR_MASK(IBStatusChanged) | ERR_MASK(InvalidAddrErr) | \ + ERR_MASK(ResetNegated) | ERR_MASK(HardwareErr) | \ + ERR_MASK(SDmaDescAddrMisalignErr) | \ + ERR_MASK(InvalidEEPCmd)) + +/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ +#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK 0x00000000000000ffULL +#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0 +#define QLOGIC_IB_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL +#define QLOGIC_IB_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL +#define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL +#define QLOGIC_IB_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL +#define QLOGIC_IB_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL +#define QLOGIC_IB_HWE_COREPLL_FBSLIP 0x0080000000000000ULL +#define QLOGIC_IB_HWE_COREPLL_RFSLIP 0x0100000000000000ULL +#define QLOGIC_IB_HWE_PCIE1PLLFAILED 0x0400000000000000ULL +#define QLOGIC_IB_HWE_PCIE0PLLFAILED 0x0800000000000000ULL +#define QLOGIC_IB_HWE_SERDESPLLFAILED 0x1000000000000000ULL +/* specific to this chip */ +#define QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR 0x0000000000000040ULL +#define QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR 0x0000000000000080ULL +#define QLOGIC_IB_HWE_SDMAMEMREADERR 0x0000000010000000ULL +#define QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED 0x2000000000000000ULL +#define QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT 0x0100000000000000ULL +#define QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT 0x0200000000000000ULL +#define QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT 0x0400000000000000ULL +#define QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT 0x0800000000000000ULL +#define QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR 0x0000008000000000ULL +#define QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL +#define QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR 0x0000001000000000ULL +#define QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR 0x0000002000000000ULL + +#define IBA7220_IBCC_LINKCMD_SHIFT 19 + +/* kr_ibcddrctrl bits */ +#define IBA7220_IBC_DLIDLMC_MASK 0xFFFFFFFFUL +#define IBA7220_IBC_DLIDLMC_SHIFT 32 + +#define IBA7220_IBC_HRTBT_MASK (SYM_RMASK(IBCDDRCtrl, HRTBT_AUTO) | \ + SYM_RMASK(IBCDDRCtrl, HRTBT_ENB)) +#define IBA7220_IBC_HRTBT_SHIFT SYM_LSB(IBCDDRCtrl, HRTBT_ENB) + +#define IBA7220_IBC_LANE_REV_SUPPORTED (1<<8) +#define IBA7220_IBC_LREV_MASK 1 +#define IBA7220_IBC_LREV_SHIFT 8 +#define IBA7220_IBC_RXPOL_MASK 1 +#define IBA7220_IBC_RXPOL_SHIFT 7 +#define IBA7220_IBC_WIDTH_SHIFT 5 +#define IBA7220_IBC_WIDTH_MASK 0x3 +#define IBA7220_IBC_WIDTH_1X_ONLY (0 << IBA7220_IBC_WIDTH_SHIFT) +#define IBA7220_IBC_WIDTH_4X_ONLY (1 << IBA7220_IBC_WIDTH_SHIFT) +#define IBA7220_IBC_WIDTH_AUTONEG (2 << IBA7220_IBC_WIDTH_SHIFT) +#define IBA7220_IBC_SPEED_AUTONEG (1 << 1) +#define IBA7220_IBC_SPEED_SDR (1 << 2) +#define IBA7220_IBC_SPEED_DDR (1 << 3) +#define IBA7220_IBC_SPEED_AUTONEG_MASK (0x7 << 1) +#define IBA7220_IBC_IBTA_1_2_MASK (1) + +/* kr_ibcddrstatus */ +/* link latency shift is 0, don't bother defining */ +#define IBA7220_DDRSTAT_LINKLAT_MASK 0x3ffffff + +/* kr_extstatus bits */ +#define QLOGIC_IB_EXTS_FREQSEL 0x2 +#define QLOGIC_IB_EXTS_SERDESSEL 0x4 +#define QLOGIC_IB_EXTS_MEMBIST_ENDTEST 0x0000000000004000 +#define QLOGIC_IB_EXTS_MEMBIST_DISABLED 0x0000000000008000 + +/* kr_xgxsconfig bits */ +#define QLOGIC_IB_XGXS_RESET 0x5ULL +#define QLOGIC_IB_XGXS_FC_SAFE (1ULL << 63) + +/* kr_rcvpktledcnt */ +#define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */ +#define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */ + +#define _QIB_GPIO_SDA_NUM 1 +#define _QIB_GPIO_SCL_NUM 0 +#define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7220 cards. */ +#define QIB_TWSI_TEMP_DEV 0x98 + +/* HW counter clock is at 4nsec */ +#define QIB_7220_PSXMITWAIT_CHECK_RATE 4000 + +#define IBA7220_R_INTRAVAIL_SHIFT 17 +#define IBA7220_R_PKEY_DIS_SHIFT 34 +#define IBA7220_R_TAILUPD_SHIFT 35 +#define IBA7220_R_CTXTCFG_SHIFT 36 + +#define IBA7220_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ + +/* + * the size bits give us 2^N, in KB units. 0 marks as invalid, + * and 7 is reserved. We currently use only 2KB and 4KB + */ +#define IBA7220_TID_SZ_SHIFT 37 /* shift to 3bit size selector */ +#define IBA7220_TID_SZ_2K (1UL << IBA7220_TID_SZ_SHIFT) /* 2KB */ +#define IBA7220_TID_SZ_4K (2UL << IBA7220_TID_SZ_SHIFT) /* 4KB */ +#define IBA7220_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ +#define PBC_7220_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ +#define PBC_7220_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ + +#define AUTONEG_TRIES 5 /* sequential retries to negotiate DDR */ + +/* packet rate matching delay multiplier */ +static u8 rate_to_delay[2][2] = { + /* 1x, 4x */ + { 8, 2 }, /* SDR */ + { 4, 1 } /* DDR */ +}; + +static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { + [IB_RATE_2_5_GBPS] = 8, + [IB_RATE_5_GBPS] = 4, + [IB_RATE_10_GBPS] = 2, + [IB_RATE_20_GBPS] = 1 +}; + +#define IBA7220_LINKSPEED_SHIFT SYM_LSB(IBCStatus, LinkSpeedActive) +#define IBA7220_LINKWIDTH_SHIFT SYM_LSB(IBCStatus, LinkWidthActive) + +/* link training states, from IBC */ +#define IB_7220_LT_STATE_DISABLED 0x00 +#define IB_7220_LT_STATE_LINKUP 0x01 +#define IB_7220_LT_STATE_POLLACTIVE 0x02 +#define IB_7220_LT_STATE_POLLQUIET 0x03 +#define IB_7220_LT_STATE_SLEEPDELAY 0x04 +#define IB_7220_LT_STATE_SLEEPQUIET 0x05 +#define IB_7220_LT_STATE_CFGDEBOUNCE 0x08 +#define IB_7220_LT_STATE_CFGRCVFCFG 0x09 +#define IB_7220_LT_STATE_CFGWAITRMT 0x0a +#define IB_7220_LT_STATE_CFGIDLE 0x0b +#define IB_7220_LT_STATE_RECOVERRETRAIN 0x0c +#define IB_7220_LT_STATE_RECOVERWAITRMT 0x0e +#define IB_7220_LT_STATE_RECOVERIDLE 0x0f + +/* link state machine states from IBC */ +#define IB_7220_L_STATE_DOWN 0x0 +#define IB_7220_L_STATE_INIT 0x1 +#define IB_7220_L_STATE_ARM 0x2 +#define IB_7220_L_STATE_ACTIVE 0x3 +#define IB_7220_L_STATE_ACT_DEFER 0x4 + +static const u8 qib_7220_physportstate[0x20] = { + [IB_7220_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, + [IB_7220_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, + [IB_7220_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, + [IB_7220_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, + [IB_7220_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, + [IB_7220_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, + [IB_7220_LT_STATE_CFGDEBOUNCE] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7220_LT_STATE_CFGRCVFCFG] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7220_LT_STATE_CFGWAITRMT] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7220_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7220_LT_STATE_RECOVERRETRAIN] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_7220_LT_STATE_RECOVERWAITRMT] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_7220_LT_STATE_RECOVERIDLE] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN +}; + +int qib_special_trigger; +module_param_named(special_trigger, qib_special_trigger, int, S_IRUGO); +MODULE_PARM_DESC(special_trigger, "Enable SpecialTrigger arm/launch"); + +#define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr) +#define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr) + +#define SYM_MASK_BIT(regname, fldname, bit) ((u64) \ + (1ULL << (SYM_LSB(regname, fldname) + (bit)))) + +#define TXEMEMPARITYERR_PIOBUF \ + SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0) +#define TXEMEMPARITYERR_PIOPBC \ + SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1) +#define TXEMEMPARITYERR_PIOLAUNCHFIFO \ + SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2) + +#define RXEMEMPARITYERR_RCVBUF \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0) +#define RXEMEMPARITYERR_LOOKUPQ \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1) +#define RXEMEMPARITYERR_EXPTID \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2) +#define RXEMEMPARITYERR_EAGERTID \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3) +#define RXEMEMPARITYERR_FLAGBUF \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4) +#define RXEMEMPARITYERR_DATAINFO \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5) +#define RXEMEMPARITYERR_HDRINFO \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6) + +/* 7220 specific hardware errors... */ +static const struct qib_hwerror_msgs qib_7220_hwerror_msgs[] = { + /* generic hardware errors */ + QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"), + QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"), + + QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF, + "TXE PIOBUF Memory Parity"), + QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC, + "TXE PIOPBC Memory Parity"), + QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO, + "TXE PIOLAUNCHFIFO Memory Parity"), + + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF, + "RXE RCVBUF Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ, + "RXE LOOKUPQ Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID, + "RXE EAGERTID Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID, + "RXE EXPTID Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF, + "RXE FLAGBUF Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO, + "RXE DATAINFO Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO, + "RXE HDRINFO Memory Parity"), + + /* chip-specific hardware errors */ + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP, + "PCIe Poisoned TLP"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT, + "PCIe completion timeout"), + /* + * In practice, it's unlikely wthat we'll see PCIe PLL, or bus + * parity or memory parity error failures, because most likely we + * won't be able to talk to the core of the chip. Nonetheless, we + * might see them, if they are in parts of the PCIe core that aren't + * essential. + */ + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED, + "PCIePLL1"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED, + "PCIePLL0"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH, + "PCIe XTLH core parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM, + "PCIe ADM TX core parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM, + "PCIe ADM RX core parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED, + "SerDes PLL"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR, + "PCIe cpl header queue"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR, + "PCIe cpl data queue"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SDMAMEMREADERR, + "Send DMA memory read"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED, + "uC PLL clock not locked"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT, + "PCIe serdes Q0 no clock"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT, + "PCIe serdes Q1 no clock"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT, + "PCIe serdes Q2 no clock"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT, + "PCIe serdes Q3 no clock"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR, + "DDS RXEQ memory parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR, + "IB uC memory parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR, + "PCIe uC oct0 memory parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR, + "PCIe uC oct1 memory parity"), +}; + +#define RXE_PARITY (RXEMEMPARITYERR_EAGERTID|RXEMEMPARITYERR_EXPTID) + +#define QLOGIC_IB_E_PKTERRS (\ + ERR_MASK(SendPktLenErr) | \ + ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(RcvVCRCErr) | \ + ERR_MASK(RcvICRCErr) | \ + ERR_MASK(RcvShortPktLenErr) | \ + ERR_MASK(RcvEBPErr)) + +/* Convenience for decoding Send DMA errors */ +#define QLOGIC_IB_E_SDMAERRS ( \ + ERR_MASK(SDmaGenMismatchErr) | \ + ERR_MASK(SDmaOutOfBoundErr) | \ + ERR_MASK(SDmaTailOutOfBoundErr) | ERR_MASK(SDmaBaseErr) | \ + ERR_MASK(SDma1stDescErr) | ERR_MASK(SDmaRpyTagErr) | \ + ERR_MASK(SDmaDwEnErr) | ERR_MASK(SDmaMissingDwErr) | \ + ERR_MASK(SDmaUnexpDataErr) | \ + ERR_MASK(SDmaDescAddrMisalignErr) | \ + ERR_MASK(SDmaDisabledErr) | \ + ERR_MASK(SendBufMisuseErr)) + +/* These are all rcv-related errors which we want to count for stats */ +#define E_SUM_PKTERRS \ + (ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) | \ + ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) | \ + ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) | \ + ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \ + ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) | \ + ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr)) + +/* These are all send-related errors which we want to count for stats */ +#define E_SUM_ERRS \ + (ERR_MASK(SendPioArmLaunchErr) | ERR_MASK(SendUnexpectedPktNumErr) | \ + ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) | \ + ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \ + ERR_MASK(InvalidAddrErr)) + +/* + * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore + * errors not related to freeze and cancelling buffers. Can't ignore + * armlaunch because could get more while still cleaning up, and need + * to cancel those as they happen. + */ +#define E_SPKT_ERRS_IGNORE \ + (ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) | \ + ERR_MASK(SendPktLenErr)) + +/* + * these are errors that can occur when the link changes state while + * a packet is being sent or received. This doesn't cover things + * like EBP or VCRC that can be the result of a sending having the + * link change state, so we receive a "known bad" packet. + */ +#define E_SUM_LINK_PKTERRS \ + (ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \ + ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \ + ERR_MASK(RcvUnexpectedCharErr)) + +static void autoneg_7220_work(struct work_struct *); +static u32 __iomem *qib_7220_getsendbuf(struct qib_pportdata *, u64, u32 *); + +/* + * Called when we might have an error that is specific to a particular + * PIO buffer, and may need to cancel that buffer, so it can be re-used. + * because we don't need to force the update of pioavail. + */ +static void qib_disarm_7220_senderrbufs(struct qib_pportdata *ppd) +{ + unsigned long sbuf[3]; + struct qib_devdata *dd = ppd->dd; + + /* + * It's possible that sendbuffererror could have bits set; might + * have already done this as a result of hardware error handling. + */ + /* read these before writing errorclear */ + sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror); + sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1); + sbuf[2] = qib_read_kreg64(dd, kr_sendbuffererror + 2); + + if (sbuf[0] || sbuf[1] || sbuf[2]) + qib_disarm_piobufs_set(dd, sbuf, + dd->piobcnt2k + dd->piobcnt4k); +} + +static void qib_7220_txe_recover(struct qib_devdata *dd) +{ + qib_devinfo(dd->pcidev, "Recovering from TXE PIO parity error\n"); + qib_disarm_7220_senderrbufs(dd->pport); +} + +/* + * This is called with interrupts disabled and sdma_lock held. + */ +static void qib_7220_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) +{ + struct qib_devdata *dd = ppd->dd; + u64 set_sendctrl = 0; + u64 clr_sendctrl = 0; + + if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) + set_sendctrl |= SYM_MASK(SendCtrl, SDmaEnable); + else + clr_sendctrl |= SYM_MASK(SendCtrl, SDmaEnable); + + if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) + set_sendctrl |= SYM_MASK(SendCtrl, SDmaIntEnable); + else + clr_sendctrl |= SYM_MASK(SendCtrl, SDmaIntEnable); + + if (op & QIB_SDMA_SENDCTRL_OP_HALT) + set_sendctrl |= SYM_MASK(SendCtrl, SDmaHalt); + else + clr_sendctrl |= SYM_MASK(SendCtrl, SDmaHalt); + + spin_lock(&dd->sendctrl_lock); + + dd->sendctrl |= set_sendctrl; + dd->sendctrl &= ~clr_sendctrl; + + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + + spin_unlock(&dd->sendctrl_lock); +} + +static void qib_decode_7220_sdma_errs(struct qib_pportdata *ppd, + u64 err, char *buf, size_t blen) +{ + static const struct { + u64 err; + const char *msg; + } errs[] = { + { ERR_MASK(SDmaGenMismatchErr), + "SDmaGenMismatch" }, + { ERR_MASK(SDmaOutOfBoundErr), + "SDmaOutOfBound" }, + { ERR_MASK(SDmaTailOutOfBoundErr), + "SDmaTailOutOfBound" }, + { ERR_MASK(SDmaBaseErr), + "SDmaBase" }, + { ERR_MASK(SDma1stDescErr), + "SDma1stDesc" }, + { ERR_MASK(SDmaRpyTagErr), + "SDmaRpyTag" }, + { ERR_MASK(SDmaDwEnErr), + "SDmaDwEn" }, + { ERR_MASK(SDmaMissingDwErr), + "SDmaMissingDw" }, + { ERR_MASK(SDmaUnexpDataErr), + "SDmaUnexpData" }, + { ERR_MASK(SDmaDescAddrMisalignErr), + "SDmaDescAddrMisalign" }, + { ERR_MASK(SendBufMisuseErr), + "SendBufMisuse" }, + { ERR_MASK(SDmaDisabledErr), + "SDmaDisabled" }, + }; + int i; + size_t bidx = 0; + + for (i = 0; i < ARRAY_SIZE(errs); i++) { + if (err & errs[i].err) + bidx += scnprintf(buf + bidx, blen - bidx, + "%s ", errs[i].msg); + } +} + +/* + * This is called as part of link down clean up so disarm and flush + * all send buffers so that SMP packets can be sent. + */ +static void qib_7220_sdma_hw_clean_up(struct qib_pportdata *ppd) +{ + /* This will trigger the Abort interrupt */ + sendctrl_7220_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH | + QIB_SENDCTRL_AVAIL_BLIP); + ppd->dd->upd_pio_shadow = 1; /* update our idea of what's busy */ +} + +static void qib_sdma_7220_setlengen(struct qib_pportdata *ppd) +{ + /* + * Set SendDmaLenGen and clear and set + * the MSB of the generation count to enable generation checking + * and load the internal generation counter. + */ + qib_write_kreg(ppd->dd, kr_senddmalengen, ppd->sdma_descq_cnt); + qib_write_kreg(ppd->dd, kr_senddmalengen, + ppd->sdma_descq_cnt | + (1ULL << QIB_7220_SendDmaLenGen_Generation_MSB)); +} + +static void qib_7220_sdma_hw_start_up(struct qib_pportdata *ppd) +{ + qib_sdma_7220_setlengen(ppd); + qib_sdma_update_7220_tail(ppd, 0); /* Set SendDmaTail */ + ppd->sdma_head_dma[0] = 0; +} + +#define DISABLES_SDMA ( \ + ERR_MASK(SDmaDisabledErr) | \ + ERR_MASK(SDmaBaseErr) | \ + ERR_MASK(SDmaTailOutOfBoundErr) | \ + ERR_MASK(SDmaOutOfBoundErr) | \ + ERR_MASK(SDma1stDescErr) | \ + ERR_MASK(SDmaRpyTagErr) | \ + ERR_MASK(SDmaGenMismatchErr) | \ + ERR_MASK(SDmaDescAddrMisalignErr) | \ + ERR_MASK(SDmaMissingDwErr) | \ + ERR_MASK(SDmaDwEnErr)) + +static void sdma_7220_errors(struct qib_pportdata *ppd, u64 errs) +{ + unsigned long flags; + struct qib_devdata *dd = ppd->dd; + char *msg; + + errs &= QLOGIC_IB_E_SDMAERRS; + + msg = dd->cspec->sdmamsgbuf; + qib_decode_7220_sdma_errs(ppd, errs, msg, sizeof dd->cspec->sdmamsgbuf); + spin_lock_irqsave(&ppd->sdma_lock, flags); + + if (errs & ERR_MASK(SendBufMisuseErr)) { + unsigned long sbuf[3]; + + sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror); + sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1); + sbuf[2] = qib_read_kreg64(dd, kr_sendbuffererror + 2); + + qib_dev_err(ppd->dd, + "IB%u:%u SendBufMisuse: %04lx %016lx %016lx\n", + ppd->dd->unit, ppd->port, sbuf[2], sbuf[1], + sbuf[0]); + } + + if (errs & ERR_MASK(SDmaUnexpDataErr)) + qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", ppd->dd->unit, + ppd->port); + + switch (ppd->sdma_state.current_state) { + case qib_sdma_state_s00_hw_down: + /* not expecting any interrupts */ + break; + + case qib_sdma_state_s10_hw_start_up_wait: + /* handled in intr path */ + break; + + case qib_sdma_state_s20_idle: + /* not expecting any interrupts */ + break; + + case qib_sdma_state_s30_sw_clean_up_wait: + /* not expecting any interrupts */ + break; + + case qib_sdma_state_s40_hw_clean_up_wait: + if (errs & ERR_MASK(SDmaDisabledErr)) + __qib_sdma_process_event(ppd, + qib_sdma_event_e50_hw_cleaned); + break; + + case qib_sdma_state_s50_hw_halt_wait: + /* handled in intr path */ + break; + + case qib_sdma_state_s99_running: + if (errs & DISABLES_SDMA) + __qib_sdma_process_event(ppd, + qib_sdma_event_e7220_err_halted); + break; + } + + spin_unlock_irqrestore(&ppd->sdma_lock, flags); +} + +/* + * Decode the error status into strings, deciding whether to always + * print * it or not depending on "normal packet errors" vs everything + * else. Return 1 if "real" errors, otherwise 0 if only packet + * errors, so caller can decide what to print with the string. + */ +static int qib_decode_7220_err(struct qib_devdata *dd, char *buf, size_t blen, + u64 err) +{ + int iserr = 1; + + *buf = '\0'; + if (err & QLOGIC_IB_E_PKTERRS) { + if (!(err & ~QLOGIC_IB_E_PKTERRS)) + iserr = 0; + if ((err & ERR_MASK(RcvICRCErr)) && + !(err & (ERR_MASK(RcvVCRCErr) | ERR_MASK(RcvEBPErr)))) + strlcat(buf, "CRC ", blen); + if (!iserr) + goto done; + } + if (err & ERR_MASK(RcvHdrLenErr)) + strlcat(buf, "rhdrlen ", blen); + if (err & ERR_MASK(RcvBadTidErr)) + strlcat(buf, "rbadtid ", blen); + if (err & ERR_MASK(RcvBadVersionErr)) + strlcat(buf, "rbadversion ", blen); + if (err & ERR_MASK(RcvHdrErr)) + strlcat(buf, "rhdr ", blen); + if (err & ERR_MASK(SendSpecialTriggerErr)) + strlcat(buf, "sendspecialtrigger ", blen); + if (err & ERR_MASK(RcvLongPktLenErr)) + strlcat(buf, "rlongpktlen ", blen); + if (err & ERR_MASK(RcvMaxPktLenErr)) + strlcat(buf, "rmaxpktlen ", blen); + if (err & ERR_MASK(RcvMinPktLenErr)) + strlcat(buf, "rminpktlen ", blen); + if (err & ERR_MASK(SendMinPktLenErr)) + strlcat(buf, "sminpktlen ", blen); + if (err & ERR_MASK(RcvFormatErr)) + strlcat(buf, "rformaterr ", blen); + if (err & ERR_MASK(RcvUnsupportedVLErr)) + strlcat(buf, "runsupvl ", blen); + if (err & ERR_MASK(RcvUnexpectedCharErr)) + strlcat(buf, "runexpchar ", blen); + if (err & ERR_MASK(RcvIBFlowErr)) + strlcat(buf, "ribflow ", blen); + if (err & ERR_MASK(SendUnderRunErr)) + strlcat(buf, "sunderrun ", blen); + if (err & ERR_MASK(SendPioArmLaunchErr)) + strlcat(buf, "spioarmlaunch ", blen); + if (err & ERR_MASK(SendUnexpectedPktNumErr)) + strlcat(buf, "sunexperrpktnum ", blen); + if (err & ERR_MASK(SendDroppedSmpPktErr)) + strlcat(buf, "sdroppedsmppkt ", blen); + if (err & ERR_MASK(SendMaxPktLenErr)) + strlcat(buf, "smaxpktlen ", blen); + if (err & ERR_MASK(SendUnsupportedVLErr)) + strlcat(buf, "sunsupVL ", blen); + if (err & ERR_MASK(InvalidAddrErr)) + strlcat(buf, "invalidaddr ", blen); + if (err & ERR_MASK(RcvEgrFullErr)) + strlcat(buf, "rcvegrfull ", blen); + if (err & ERR_MASK(RcvHdrFullErr)) + strlcat(buf, "rcvhdrfull ", blen); + if (err & ERR_MASK(IBStatusChanged)) + strlcat(buf, "ibcstatuschg ", blen); + if (err & ERR_MASK(RcvIBLostLinkErr)) + strlcat(buf, "riblostlink ", blen); + if (err & ERR_MASK(HardwareErr)) + strlcat(buf, "hardware ", blen); + if (err & ERR_MASK(ResetNegated)) + strlcat(buf, "reset ", blen); + if (err & QLOGIC_IB_E_SDMAERRS) + qib_decode_7220_sdma_errs(dd->pport, err, buf, blen); + if (err & ERR_MASK(InvalidEEPCmd)) + strlcat(buf, "invalideepromcmd ", blen); +done: + return iserr; +} + +static void reenable_7220_chase(unsigned long opaque) +{ + struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; + ppd->cpspec->chase_timer.expires = 0; + qib_set_ib_7220_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, + QLOGIC_IB_IBCC_LINKINITCMD_POLL); +} + +static void handle_7220_chase(struct qib_pportdata *ppd, u64 ibcst) +{ + u8 ibclt; + u64 tnow; + + ibclt = (u8)SYM_FIELD(ibcst, IBCStatus, LinkTrainingState); + + /* + * Detect and handle the state chase issue, where we can + * get stuck if we are unlucky on timing on both sides of + * the link. If we are, we disable, set a timer, and + * then re-enable. + */ + switch (ibclt) { + case IB_7220_LT_STATE_CFGRCVFCFG: + case IB_7220_LT_STATE_CFGWAITRMT: + case IB_7220_LT_STATE_TXREVLANES: + case IB_7220_LT_STATE_CFGENH: + tnow = get_jiffies_64(); + if (ppd->cpspec->chase_end && + time_after64(tnow, ppd->cpspec->chase_end)) { + ppd->cpspec->chase_end = 0; + qib_set_ib_7220_lstate(ppd, + QLOGIC_IB_IBCC_LINKCMD_DOWN, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + ppd->cpspec->chase_timer.expires = jiffies + + QIB_CHASE_DIS_TIME; + add_timer(&ppd->cpspec->chase_timer); + } else if (!ppd->cpspec->chase_end) + ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; + break; + + default: + ppd->cpspec->chase_end = 0; + break; + } +} + +static void handle_7220_errors(struct qib_devdata *dd, u64 errs) +{ + char *msg; + u64 ignore_this_time = 0; + u64 iserr = 0; + int log_idx; + struct qib_pportdata *ppd = dd->pport; + u64 mask; + + /* don't report errors that are masked */ + errs &= dd->cspec->errormask; + msg = dd->cspec->emsgbuf; + + /* do these first, they are most important */ + if (errs & ERR_MASK(HardwareErr)) + qib_7220_handle_hwerrors(dd, msg, sizeof dd->cspec->emsgbuf); + else + for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx) + if (errs & dd->eep_st_masks[log_idx].errs_to_log) + qib_inc_eeprom_err(dd, log_idx, 1); + + if (errs & QLOGIC_IB_E_SDMAERRS) + sdma_7220_errors(ppd, errs); + + if (errs & ~IB_E_BITSEXTANT) + qib_dev_err(dd, "error interrupt with unknown errors " + "%llx set\n", (unsigned long long) + (errs & ~IB_E_BITSEXTANT)); + + if (errs & E_SUM_ERRS) { + qib_disarm_7220_senderrbufs(ppd); + if ((errs & E_SUM_LINK_PKTERRS) && + !(ppd->lflags & QIBL_LINKACTIVE)) { + /* + * This can happen when trying to bring the link + * up, but the IB link changes state at the "wrong" + * time. The IB logic then complains that the packet + * isn't valid. We don't want to confuse people, so + * we just don't print them, except at debug + */ + ignore_this_time = errs & E_SUM_LINK_PKTERRS; + } + } else if ((errs & E_SUM_LINK_PKTERRS) && + !(ppd->lflags & QIBL_LINKACTIVE)) { + /* + * This can happen when SMA is trying to bring the link + * up, but the IB link changes state at the "wrong" time. + * The IB logic then complains that the packet isn't + * valid. We don't want to confuse people, so we just + * don't print them, except at debug + */ + ignore_this_time = errs & E_SUM_LINK_PKTERRS; + } + + qib_write_kreg(dd, kr_errclear, errs); + + errs &= ~ignore_this_time; + if (!errs) + goto done; + + /* + * The ones we mask off are handled specially below + * or above. Also mask SDMADISABLED by default as it + * is too chatty. + */ + mask = ERR_MASK(IBStatusChanged) | + ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | + ERR_MASK(HardwareErr) | ERR_MASK(SDmaDisabledErr); + + qib_decode_7220_err(dd, msg, sizeof dd->cspec->emsgbuf, errs & ~mask); + + if (errs & E_SUM_PKTERRS) + qib_stats.sps_rcverrs++; + if (errs & E_SUM_ERRS) + qib_stats.sps_txerrs++; + iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS | + ERR_MASK(SDmaDisabledErr)); + + if (errs & ERR_MASK(IBStatusChanged)) { + u64 ibcs; + + ibcs = qib_read_kreg64(dd, kr_ibcstatus); + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) + handle_7220_chase(ppd, ibcs); + + /* Update our picture of width and speed from chip */ + ppd->link_width_active = + ((ibcs >> IBA7220_LINKWIDTH_SHIFT) & 1) ? + IB_WIDTH_4X : IB_WIDTH_1X; + ppd->link_speed_active = + ((ibcs >> IBA7220_LINKSPEED_SHIFT) & 1) ? + QIB_IB_DDR : QIB_IB_SDR; + + /* + * Since going into a recovery state causes the link state + * to go down and since recovery is transitory, it is better + * if we "miss" ever seeing the link training state go into + * recovery (i.e., ignore this transition for link state + * special handling purposes) without updating lastibcstat. + */ + if (qib_7220_phys_portstate(ibcs) != + IB_PHYSPORTSTATE_LINK_ERR_RECOVER) + qib_handle_e_ibstatuschanged(ppd, ibcs); + } + + if (errs & ERR_MASK(ResetNegated)) { + qib_dev_err(dd, "Got reset, requires re-init " + "(unload and reload driver)\n"); + dd->flags &= ~QIB_INITTED; /* needs re-init */ + /* mark as having had error */ + *dd->devstatusp |= QIB_STATUS_HWERROR; + *dd->pport->statusp &= ~QIB_STATUS_IB_CONF; + } + + if (*msg && iserr) + qib_dev_porterr(dd, ppd->port, "%s error\n", msg); + + if (ppd->state_wanted & ppd->lflags) + wake_up_interruptible(&ppd->state_wait); + + /* + * If there were hdrq or egrfull errors, wake up any processes + * waiting in poll. We used to try to check which contexts had + * the overflow, but given the cost of that and the chip reads + * to support it, it's better to just wake everybody up if we + * get an overflow; waiters can poll again if it's not them. + */ + if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { + qib_handle_urcv(dd, ~0U); + if (errs & ERR_MASK(RcvEgrFullErr)) + qib_stats.sps_buffull++; + else + qib_stats.sps_hdrfull++; + } +done: + return; +} + +/* enable/disable chip from delivering interrupts */ +static void qib_7220_set_intr_state(struct qib_devdata *dd, u32 enable) +{ + if (enable) { + if (dd->flags & QIB_BADINTR) + return; + qib_write_kreg(dd, kr_intmask, ~0ULL); + /* force re-interrupt of any pending interrupts. */ + qib_write_kreg(dd, kr_intclear, 0ULL); + } else + qib_write_kreg(dd, kr_intmask, 0ULL); +} + +/* + * Try to cleanup as much as possible for anything that might have gone + * wrong while in freeze mode, such as pio buffers being written by user + * processes (causing armlaunch), send errors due to going into freeze mode, + * etc., and try to avoid causing extra interrupts while doing so. + * Forcibly update the in-memory pioavail register copies after cleanup + * because the chip won't do it while in freeze mode (the register values + * themselves are kept correct). + * Make sure that we don't lose any important interrupts by using the chip + * feature that says that writing 0 to a bit in *clear that is set in + * *status will cause an interrupt to be generated again (if allowed by + * the *mask value). + * This is in chip-specific code because of all of the register accesses, + * even though the details are similar on most chips. + */ +static void qib_7220_clear_freeze(struct qib_devdata *dd) +{ + /* disable error interrupts, to avoid confusion */ + qib_write_kreg(dd, kr_errmask, 0ULL); + + /* also disable interrupts; errormask is sometimes overwriten */ + qib_7220_set_intr_state(dd, 0); + + qib_cancel_sends(dd->pport); + + /* clear the freeze, and be sure chip saw it */ + qib_write_kreg(dd, kr_control, dd->control); + qib_read_kreg32(dd, kr_scratch); + + /* force in-memory update now we are out of freeze */ + qib_force_pio_avail_update(dd); + + /* + * force new interrupt if any hwerr, error or interrupt bits are + * still set, and clear "safe" send packet errors related to freeze + * and cancelling sends. Re-enable error interrupts before possible + * force of re-interrupt on pending interrupts. + */ + qib_write_kreg(dd, kr_hwerrclear, 0ULL); + qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); + qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); + qib_7220_set_intr_state(dd, 1); +} + +/** + * qib_7220_handle_hwerrors - display hardware errors. + * @dd: the qlogic_ib device + * @msg: the output buffer + * @msgl: the size of the output buffer + * + * Use same msg buffer as regular errors to avoid excessive stack + * use. Most hardware errors are catastrophic, but for right now, + * we'll print them and continue. We reuse the same message buffer as + * handle_7220_errors() to avoid excessive stack usage. + */ +static void qib_7220_handle_hwerrors(struct qib_devdata *dd, char *msg, + size_t msgl) +{ + u64 hwerrs; + u32 bits, ctrl; + int isfatal = 0; + char *bitsmsg; + int log_idx; + + hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); + if (!hwerrs) + goto bail; + if (hwerrs == ~0ULL) { + qib_dev_err(dd, "Read of hardware error status failed " + "(all bits set); ignoring\n"); + goto bail; + } + qib_stats.sps_hwerrs++; + + /* + * Always clear the error status register, except MEMBISTFAIL, + * regardless of whether we continue or stop using the chip. + * We want that set so we know it failed, even across driver reload. + * We'll still ignore it in the hwerrmask. We do this partly for + * diagnostics, but also for support. + */ + qib_write_kreg(dd, kr_hwerrclear, + hwerrs & ~HWE_MASK(PowerOnBISTFailed)); + + hwerrs &= dd->cspec->hwerrmask; + + /* We log some errors to EEPROM, check if we have any of those. */ + for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx) + if (hwerrs & dd->eep_st_masks[log_idx].hwerrs_to_log) + qib_inc_eeprom_err(dd, log_idx, 1); + if (hwerrs & ~(TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC | + RXE_PARITY)) + qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx " + "(cleared)\n", (unsigned long long) hwerrs); + + if (hwerrs & ~IB_HWE_BITSEXTANT) + qib_dev_err(dd, "hwerror interrupt with unknown errors " + "%llx set\n", (unsigned long long) + (hwerrs & ~IB_HWE_BITSEXTANT)); + + if (hwerrs & QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR) + qib_sd7220_clr_ibpar(dd); + + ctrl = qib_read_kreg32(dd, kr_control); + if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) { + /* + * Parity errors in send memory are recoverable by h/w + * just do housekeeping, exit freeze mode and continue. + */ + if (hwerrs & (TXEMEMPARITYERR_PIOBUF | + TXEMEMPARITYERR_PIOPBC)) { + qib_7220_txe_recover(dd); + hwerrs &= ~(TXEMEMPARITYERR_PIOBUF | + TXEMEMPARITYERR_PIOPBC); + } + if (hwerrs) + isfatal = 1; + else + qib_7220_clear_freeze(dd); + } + + *msg = '\0'; + + if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { + isfatal = 1; + strlcat(msg, "[Memory BIST test failed, " + "InfiniPath hardware unusable]", msgl); + /* ignore from now on, so disable until driver reloaded */ + dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + qib_format_hwerrors(hwerrs, qib_7220_hwerror_msgs, + ARRAY_SIZE(qib_7220_hwerror_msgs), msg, msgl); + + bitsmsg = dd->cspec->bitsmsgbuf; + if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << + QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) { + bits = (u32) ((hwerrs >> + QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) & + QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK); + snprintf(bitsmsg, sizeof dd->cspec->bitsmsgbuf, + "[PCIe Mem Parity Errs %x] ", bits); + strlcat(msg, bitsmsg, msgl); + } + +#define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP | \ + QLOGIC_IB_HWE_COREPLL_RFSLIP) + + if (hwerrs & _QIB_PLL_FAIL) { + isfatal = 1; + snprintf(bitsmsg, sizeof dd->cspec->bitsmsgbuf, + "[PLL failed (%llx), InfiniPath hardware unusable]", + (unsigned long long) hwerrs & _QIB_PLL_FAIL); + strlcat(msg, bitsmsg, msgl); + /* ignore from now on, so disable until driver reloaded */ + dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) { + /* + * If it occurs, it is left masked since the eternal + * interface is unused. + */ + dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED; + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + qib_dev_err(dd, "%s hardware error\n", msg); + + if (isfatal && !dd->diag_client) { + qib_dev_err(dd, "Fatal Hardware Error, no longer" + " usable, SN %.16s\n", dd->serial); + /* + * For /sys status file and user programs to print; if no + * trailing brace is copied, we'll know it was truncated. + */ + if (dd->freezemsg) + snprintf(dd->freezemsg, dd->freezelen, + "{%s}", msg); + qib_disable_after_error(dd); + } +bail:; +} + +/** + * qib_7220_init_hwerrors - enable hardware errors + * @dd: the qlogic_ib device + * + * now that we have finished initializing everything that might reasonably + * cause a hardware error, and cleared those errors bits as they occur, + * we can enable hardware errors in the mask (potentially enabling + * freeze mode), and enable hardware errors as errors (along with + * everything else) in errormask + */ +static void qib_7220_init_hwerrors(struct qib_devdata *dd) +{ + u64 val; + u64 extsval; + + extsval = qib_read_kreg64(dd, kr_extstatus); + + if (!(extsval & (QLOGIC_IB_EXTS_MEMBIST_ENDTEST | + QLOGIC_IB_EXTS_MEMBIST_DISABLED))) + qib_dev_err(dd, "MemBIST did not complete!\n"); + if (extsval & QLOGIC_IB_EXTS_MEMBIST_DISABLED) + qib_devinfo(dd->pcidev, "MemBIST is disabled.\n"); + + val = ~0ULL; /* default to all hwerrors become interrupts, */ + + val &= ~QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR; + dd->cspec->hwerrmask = val; + + qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + + /* clear all */ + qib_write_kreg(dd, kr_errclear, ~0ULL); + /* enable errors that are masked, at least this first time. */ + qib_write_kreg(dd, kr_errmask, ~0ULL); + dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); + /* clear any interrupts up to this point (ints still not enabled) */ + qib_write_kreg(dd, kr_intclear, ~0ULL); +} + +/* + * Disable and enable the armlaunch error. Used for PIO bandwidth testing + * on chips that are count-based, rather than trigger-based. There is no + * reference counting, but that's also fine, given the intended use. + * Only chip-specific because it's all register accesses + */ +static void qib_set_7220_armlaunch(struct qib_devdata *dd, u32 enable) +{ + if (enable) { + qib_write_kreg(dd, kr_errclear, ERR_MASK(SendPioArmLaunchErr)); + dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr); + } else + dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr); + qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); +} + +/* + * Formerly took parameter <which> in pre-shifted, + * pre-merged form with LinkCmd and LinkInitCmd + * together, and assuming the zero was NOP. + */ +static void qib_set_ib_7220_lstate(struct qib_pportdata *ppd, u16 linkcmd, + u16 linitcmd) +{ + u64 mod_wd; + struct qib_devdata *dd = ppd->dd; + unsigned long flags; + + if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { + /* + * If we are told to disable, note that so link-recovery + * code does not attempt to bring us back up. + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { + /* + * Any other linkinitcmd will lead to LINKDOWN and then + * to INIT (if all is well), so clear flag to let + * link-recovery code attempt to bring us back up. + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } + + mod_wd = (linkcmd << IBA7220_IBCC_LINKCMD_SHIFT) | + (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + + qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl | mod_wd); + /* write to chip to prevent back-to-back writes of ibc reg */ + qib_write_kreg(dd, kr_scratch, 0); +} + +/* + * All detailed interaction with the SerDes has been moved to qib_sd7220.c + * + * The portion of IBA7220-specific bringup_serdes() that actually deals with + * registers and memory within the SerDes itself is qib_sd7220_init(). + */ + +/** + * qib_7220_bringup_serdes - bring up the serdes + * @ppd: physical port on the qlogic_ib device + */ +static int qib_7220_bringup_serdes(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u64 val, prev_val, guid, ibc; + int ret = 0; + + /* Put IBC in reset, sends disabled */ + dd->control &= ~QLOGIC_IB_C_LINKENABLE; + qib_write_kreg(dd, kr_control, 0ULL); + + if (qib_compat_ddr_negotiate) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = read_7220_creg32(dd, cr_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = + read_7220_creg32(dd, cr_iblinkerrrecov); + } + + /* flowcontrolwatermark is in units of KBytes */ + ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark); + /* + * How often flowctrl sent. More or less in usecs; balance against + * watermark value, so that in theory senders always get a flow + * control update in time to not let the IB link go idle. + */ + ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod); + /* max error tolerance */ + ibc |= 0xfULL << SYM_LSB(IBCCtrl, PhyerrThreshold); + /* use "real" buffer space for */ + ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale); + /* IB credit flow control. */ + ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold); + /* + * set initial max size pkt IBC will send, including ICRC; it's the + * PIO buffer size in dwords, less 1; also see qib_set_mtu() + */ + ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen); + ppd->cpspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */ + + /* initially come up waiting for TS1, without sending anything. */ + val = ppd->cpspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << + QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + qib_write_kreg(dd, kr_ibcctrl, val); + + if (!ppd->cpspec->ibcddrctrl) { + /* not on re-init after reset */ + ppd->cpspec->ibcddrctrl = qib_read_kreg64(dd, kr_ibcddrctrl); + + if (ppd->link_speed_enabled == (QIB_IB_SDR | QIB_IB_DDR)) + ppd->cpspec->ibcddrctrl |= + IBA7220_IBC_SPEED_AUTONEG_MASK | + IBA7220_IBC_IBTA_1_2_MASK; + else + ppd->cpspec->ibcddrctrl |= + ppd->link_speed_enabled == QIB_IB_DDR ? + IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR; + if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == + (IB_WIDTH_1X | IB_WIDTH_4X)) + ppd->cpspec->ibcddrctrl |= IBA7220_IBC_WIDTH_AUTONEG; + else + ppd->cpspec->ibcddrctrl |= + ppd->link_width_enabled == IB_WIDTH_4X ? + IBA7220_IBC_WIDTH_4X_ONLY : + IBA7220_IBC_WIDTH_1X_ONLY; + + /* always enable these on driver reload, not sticky */ + ppd->cpspec->ibcddrctrl |= + IBA7220_IBC_RXPOL_MASK << IBA7220_IBC_RXPOL_SHIFT; + ppd->cpspec->ibcddrctrl |= + IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT; + + /* enable automatic lane reversal detection for receive */ + ppd->cpspec->ibcddrctrl |= IBA7220_IBC_LANE_REV_SUPPORTED; + } else + /* write to chip to prevent back-to-back writes of ibc reg */ + qib_write_kreg(dd, kr_scratch, 0); + + qib_write_kreg(dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl); + qib_write_kreg(dd, kr_scratch, 0); + + qib_write_kreg(dd, kr_ncmodectrl, 0Ull); + qib_write_kreg(dd, kr_scratch, 0); + + ret = qib_sd7220_init(dd); + + val = qib_read_kreg64(dd, kr_xgxs_cfg); + prev_val = val; + val |= QLOGIC_IB_XGXS_FC_SAFE; + if (val != prev_val) { + qib_write_kreg(dd, kr_xgxs_cfg, val); + qib_read_kreg32(dd, kr_scratch); + } + if (val & QLOGIC_IB_XGXS_RESET) + val &= ~QLOGIC_IB_XGXS_RESET; + if (val != prev_val) + qib_write_kreg(dd, kr_xgxs_cfg, val); + + /* first time through, set port guid */ + if (!ppd->guid) + ppd->guid = dd->base_guid; + guid = be64_to_cpu(ppd->guid); + + qib_write_kreg(dd, kr_hrtbt_guid, guid); + if (!ret) { + dd->control |= QLOGIC_IB_C_LINKENABLE; + qib_write_kreg(dd, kr_control, dd->control); + } else + /* write to chip to prevent back-to-back writes of ibc reg */ + qib_write_kreg(dd, kr_scratch, 0); + return ret; +} + +/** + * qib_7220_quiet_serdes - set serdes to txidle + * @ppd: physical port of the qlogic_ib device + * Called when driver is being unloaded + */ +static void qib_7220_quiet_serdes(struct qib_pportdata *ppd) +{ + u64 val; + struct qib_devdata *dd = ppd->dd; + unsigned long flags; + + /* disable IBC */ + dd->control &= ~QLOGIC_IB_C_LINKENABLE; + qib_write_kreg(dd, kr_control, + dd->control | QLOGIC_IB_C_FREEZEMODE); + + ppd->cpspec->chase_end = 0; + if (ppd->cpspec->chase_timer.data) /* if initted */ + del_timer_sync(&ppd->cpspec->chase_timer); + + if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || + ppd->cpspec->ibdeltainprog) { + u64 diagc; + + /* enable counter writes */ + diagc = qib_read_kreg64(dd, kr_hwdiagctrl); + qib_write_kreg(dd, kr_hwdiagctrl, + diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); + + if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { + val = read_7220_creg32(dd, cr_ibsymbolerr); + if (ppd->cpspec->ibdeltainprog) + val -= val - ppd->cpspec->ibsymsnap; + val -= ppd->cpspec->ibsymdelta; + write_7220_creg(dd, cr_ibsymbolerr, val); + } + if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { + val = read_7220_creg32(dd, cr_iblinkerrrecov); + if (ppd->cpspec->ibdeltainprog) + val -= val - ppd->cpspec->iblnkerrsnap; + val -= ppd->cpspec->iblnkerrdelta; + write_7220_creg(dd, cr_iblinkerrrecov, val); + } + + /* and disable counter writes */ + qib_write_kreg(dd, kr_hwdiagctrl, diagc); + } + qib_set_ib_7220_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + wake_up(&ppd->cpspec->autoneg_wait); + cancel_delayed_work(&ppd->cpspec->autoneg_work); + flush_scheduled_work(); + + shutdown_7220_relock_poll(ppd->dd); + val = qib_read_kreg64(ppd->dd, kr_xgxs_cfg); + val |= QLOGIC_IB_XGXS_RESET; + qib_write_kreg(ppd->dd, kr_xgxs_cfg, val); +} + +/** + * qib_setup_7220_setextled - set the state of the two external LEDs + * @dd: the qlogic_ib device + * @on: whether the link is up or not + * + * The exact combo of LEDs if on is true is determined by looking + * at the ibcstatus. + * + * These LEDs indicate the physical and logical state of IB link. + * For this chip (at least with recommended board pinouts), LED1 + * is Yellow (logical state) and LED2 is Green (physical state), + * + * Note: We try to match the Mellanox HCA LED behavior as best + * we can. Green indicates physical link state is OK (something is + * plugged in, and we can train). + * Amber indicates the link is logically up (ACTIVE). + * Mellanox further blinks the amber LED to indicate data packet + * activity, but we have no hardware support for that, so it would + * require waking up every 10-20 msecs and checking the counters + * on the chip, and then turning the LED off if appropriate. That's + * visible overhead, so not something we will do. + * + */ +static void qib_setup_7220_setextled(struct qib_pportdata *ppd, u32 on) +{ + struct qib_devdata *dd = ppd->dd; + u64 extctl, ledblink = 0, val, lst, ltst; + unsigned long flags; + + /* + * The diags use the LED to indicate diag info, so we leave + * the external LED alone when the diags are running. + */ + if (dd->diag_client) + return; + + if (ppd->led_override) { + ltst = (ppd->led_override & QIB_LED_PHYS) ? + IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED, + lst = (ppd->led_override & QIB_LED_LOG) ? + IB_PORT_ACTIVE : IB_PORT_DOWN; + } else if (on) { + val = qib_read_kreg64(dd, kr_ibcstatus); + ltst = qib_7220_phys_portstate(val); + lst = qib_7220_iblink_state(val); + } else { + ltst = 0; + lst = 0; + } + + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) | + SYM_MASK(EXTCtrl, LEDPriPortYellowOn)); + if (ltst == IB_PHYSPORTSTATE_LINKUP) { + extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn); + /* + * counts are in chip clock (4ns) periods. + * This is 1/16 sec (66.6ms) on, + * 3/16 sec (187.5 ms) off, with packets rcvd + */ + ledblink = ((66600 * 1000UL / 4) << IBA7220_LEDBLINK_ON_SHIFT) + | ((187500 * 1000UL / 4) << IBA7220_LEDBLINK_OFF_SHIFT); + } + if (lst == IB_PORT_ACTIVE) + extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn); + dd->cspec->extctrl = extctl; + qib_write_kreg(dd, kr_extctrl, extctl); + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); + + if (ledblink) /* blink the LED on packet receive */ + qib_write_kreg(dd, kr_rcvpktledcnt, ledblink); +} + +static void qib_7220_free_irq(struct qib_devdata *dd) +{ + if (dd->cspec->irq) { + free_irq(dd->cspec->irq, dd); + dd->cspec->irq = 0; + } + qib_nomsi(dd); +} + +/* + * qib_setup_7220_cleanup - clean up any per-chip chip-specific stuff + * @dd: the qlogic_ib device + * + * This is called during driver unload. + * + */ +static void qib_setup_7220_cleanup(struct qib_devdata *dd) +{ + qib_7220_free_irq(dd); + kfree(dd->cspec->cntrs); + kfree(dd->cspec->portcntrs); +} + +/* + * This is only called for SDmaInt. + * SDmaDisabled is handled on the error path. + */ +static void sdma_7220_intr(struct qib_pportdata *ppd, u64 istat) +{ + unsigned long flags; + + spin_lock_irqsave(&ppd->sdma_lock, flags); + + switch (ppd->sdma_state.current_state) { + case qib_sdma_state_s00_hw_down: + break; + + case qib_sdma_state_s10_hw_start_up_wait: + __qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); + break; + + case qib_sdma_state_s20_idle: + break; + + case qib_sdma_state_s30_sw_clean_up_wait: + break; + + case qib_sdma_state_s40_hw_clean_up_wait: + break; + + case qib_sdma_state_s50_hw_halt_wait: + __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); + break; + + case qib_sdma_state_s99_running: + /* too chatty to print here */ + __qib_sdma_intr(ppd); + break; + } + spin_unlock_irqrestore(&ppd->sdma_lock, flags); +} + +static void qib_wantpiobuf_7220_intr(struct qib_devdata *dd, u32 needint) +{ + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if (needint) { + if (!(dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) + goto done; + /* + * blip the availupd off, next write will be on, so + * we ensure an avail update, regardless of threshold or + * buffers becoming free, whenever we want an interrupt + */ + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl & + ~SYM_MASK(SendCtrl, SendBufAvailUpd)); + qib_write_kreg(dd, kr_scratch, 0ULL); + dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); + } else + dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0ULL); +done: + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); +} + +/* + * Handle errors and unusual events first, separate function + * to improve cache hits for fast path interrupt handling. + */ +static noinline void unlikely_7220_intr(struct qib_devdata *dd, u64 istat) +{ + if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT)) + qib_dev_err(dd, + "interrupt with unknown interrupts %Lx set\n", + istat & ~QLOGIC_IB_I_BITSEXTANT); + + if (istat & QLOGIC_IB_I_GPIO) { + u32 gpiostatus; + + /* + * Boards for this chip currently don't use GPIO interrupts, + * so clear by writing GPIOstatus to GPIOclear, and complain + * to alert developer. To avoid endless repeats, clear + * the bits in the mask, since there is some kind of + * programming error or chip problem. + */ + gpiostatus = qib_read_kreg32(dd, kr_gpio_status); + /* + * In theory, writing GPIOstatus to GPIOclear could + * have a bad side-effect on some diagnostic that wanted + * to poll for a status-change, but the various shadows + * make that problematic at best. Diags will just suppress + * all GPIO interrupts during such tests. + */ + qib_write_kreg(dd, kr_gpio_clear, gpiostatus); + + if (gpiostatus) { + const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); + u32 gpio_irq = mask & gpiostatus; + + /* + * A bit set in status and (chip) Mask register + * would cause an interrupt. Since we are not + * expecting any, report it. Also check that the + * chip reflects our shadow, report issues, + * and refresh from the shadow. + */ + /* + * Clear any troublemakers, and update chip + * from shadow + */ + dd->cspec->gpio_mask &= ~gpio_irq; + qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); + } + } + + if (istat & QLOGIC_IB_I_ERROR) { + u64 estat; + + qib_stats.sps_errints++; + estat = qib_read_kreg64(dd, kr_errstatus); + if (!estat) + qib_devinfo(dd->pcidev, "error interrupt (%Lx), " + "but no error bits set!\n", istat); + else + handle_7220_errors(dd, estat); + } +} + +static irqreturn_t qib_7220intr(int irq, void *data) +{ + struct qib_devdata *dd = data; + irqreturn_t ret; + u64 istat; + u64 ctxtrbits; + u64 rmask; + unsigned i; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + ret = IRQ_HANDLED; + goto bail; + } + + istat = qib_read_kreg64(dd, kr_intstatus); + + if (unlikely(!istat)) { + ret = IRQ_NONE; /* not our interrupt, or already handled */ + goto bail; + } + if (unlikely(istat == -1)) { + qib_bad_intrstatus(dd); + /* don't know if it was our interrupt or not */ + ret = IRQ_NONE; + goto bail; + } + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT | + QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR))) + unlikely_7220_intr(dd, istat); + + /* + * Clear the interrupt bits we found set, relatively early, so we + * "know" know the chip will have seen this by the time we process + * the queue, and will re-interrupt if necessary. The processor + * itself won't take the interrupt again until we return. + */ + qib_write_kreg(dd, kr_intclear, istat); + + /* + * Handle kernel receive queues before checking for pio buffers + * available since receives can overflow; piobuf waiters can afford + * a few extra cycles, since they were waiting anyway. + */ + ctxtrbits = istat & + ((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) | + (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT)); + if (ctxtrbits) { + rmask = (1ULL << QLOGIC_IB_I_RCVAVAIL_SHIFT) | + (1ULL << QLOGIC_IB_I_RCVURG_SHIFT); + for (i = 0; i < dd->first_user_ctxt; i++) { + if (ctxtrbits & rmask) { + ctxtrbits &= ~rmask; + qib_kreceive(dd->rcd[i], NULL, NULL); + } + rmask <<= 1; + } + if (ctxtrbits) { + ctxtrbits = + (ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) | + (ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT); + qib_handle_urcv(dd, ctxtrbits); + } + } + + /* only call for SDmaInt */ + if (istat & QLOGIC_IB_I_SDMAINT) + sdma_7220_intr(dd->pport, istat); + + if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) + qib_ib_piobufavail(dd); + + ret = IRQ_HANDLED; +bail: + return ret; +} + +/* + * Set up our chip-specific interrupt handler. + * The interrupt type has already been setup, so + * we just need to do the registration and error checking. + * If we are using MSI interrupts, we may fall back to + * INTx later, if the interrupt handler doesn't get called + * within 1/2 second (see verify_interrupt()). + */ +static void qib_setup_7220_interrupt(struct qib_devdata *dd) +{ + if (!dd->cspec->irq) + qib_dev_err(dd, "irq is 0, BIOS error? Interrupts won't " + "work\n"); + else { + int ret = request_irq(dd->cspec->irq, qib_7220intr, + dd->msi_lo ? 0 : IRQF_SHARED, + QIB_DRV_NAME, dd); + + if (ret) + qib_dev_err(dd, "Couldn't setup %s interrupt " + "(irq=%d): %d\n", dd->msi_lo ? + "MSI" : "INTx", dd->cspec->irq, ret); + } +} + +/** + * qib_7220_boardname - fill in the board name + * @dd: the qlogic_ib device + * + * info is based on the board revision register + */ +static void qib_7220_boardname(struct qib_devdata *dd) +{ + char *n; + u32 boardid, namelen; + + boardid = SYM_FIELD(dd->revision, Revision, + BoardID); + + switch (boardid) { + case 1: + n = "InfiniPath_QLE7240"; + break; + case 2: + n = "InfiniPath_QLE7280"; + break; + default: + qib_dev_err(dd, "Unknown 7220 board with ID %u\n", boardid); + n = "Unknown_InfiniPath_7220"; + break; + } + + namelen = strlen(n) + 1; + dd->boardname = kmalloc(namelen, GFP_KERNEL); + if (!dd->boardname) + qib_dev_err(dd, "Failed allocation for board name: %s\n", n); + else + snprintf(dd->boardname, namelen, "%s", n); + + if (dd->majrev != 5 || !dd->minrev || dd->minrev > 2) + qib_dev_err(dd, "Unsupported InfiniPath hardware " + "revision %u.%u!\n", + dd->majrev, dd->minrev); + + snprintf(dd->boardversion, sizeof(dd->boardversion), + "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", + QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, + (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch), + dd->majrev, dd->minrev, + (unsigned)SYM_FIELD(dd->revision, Revision_R, SW)); +} + +/* + * This routine sleeps, so it can only be called from user context, not + * from interrupt context. + */ +static int qib_setup_7220_reset(struct qib_devdata *dd) +{ + u64 val; + int i; + int ret; + u16 cmdval; + u8 int_line, clinesz; + unsigned long flags; + + qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); + + /* Use dev_err so it shows up in logs, etc. */ + qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); + + /* no interrupts till re-initted */ + qib_7220_set_intr_state(dd, 0); + + dd->pport->cpspec->ibdeltainprog = 0; + dd->pport->cpspec->ibsymdelta = 0; + dd->pport->cpspec->iblnkerrdelta = 0; + + /* + * Keep chip from being accessed until we are ready. Use + * writeq() directly, to allow the write even though QIB_PRESENT + * isnt' set. + */ + dd->flags &= ~(QIB_INITTED | QIB_PRESENT); + dd->int_counter = 0; /* so we check interrupts work again */ + val = dd->control | QLOGIC_IB_C_RESET; + writeq(val, &dd->kregbase[kr_control]); + mb(); /* prevent compiler reordering around actual reset */ + + for (i = 1; i <= 5; i++) { + /* + * Allow MBIST, etc. to complete; longer on each retry. + * We sometimes get machine checks from bus timeout if no + * response, so for now, make it *really* long. + */ + msleep(1000 + (1 + i) * 2000); + + qib_pcie_reenable(dd, cmdval, int_line, clinesz); + + /* + * Use readq directly, so we don't need to mark it as PRESENT + * until we get a successful indication that all is well. + */ + val = readq(&dd->kregbase[kr_revision]); + if (val == dd->revision) { + dd->flags |= QIB_PRESENT; /* it's back */ + ret = qib_reinit_intr(dd); + goto bail; + } + } + ret = 0; /* failed */ + +bail: + if (ret) { + if (qib_pcie_params(dd, dd->lbus_width, NULL, NULL)) + qib_dev_err(dd, "Reset failed to setup PCIe or " + "interrupts; continuing anyway\n"); + + /* hold IBC in reset, no sends, etc till later */ + qib_write_kreg(dd, kr_control, 0ULL); + + /* clear the reset error, init error/hwerror mask */ + qib_7220_init_hwerrors(dd); + + /* do setup similar to speed or link-width changes */ + if (dd->pport->cpspec->ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK) + dd->cspec->presets_needed = 1; + spin_lock_irqsave(&dd->pport->lflags_lock, flags); + dd->pport->lflags |= QIBL_IB_FORCE_NOTIFY; + dd->pport->lflags &= ~QIBL_IB_AUTONEG_FAILED; + spin_unlock_irqrestore(&dd->pport->lflags_lock, flags); + } + + return ret; +} + +/** + * qib_7220_put_tid - write a TID to the chip + * @dd: the qlogic_ib device + * @tidptr: pointer to the expected TID (in chip) to update + * @tidtype: 0 for eager, 1 for expected + * @pa: physical address of in memory buffer; tidinvalid if freeing + */ +static void qib_7220_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, + u32 type, unsigned long pa) +{ + if (pa != dd->tidinvalid) { + u64 chippa = pa >> IBA7220_TID_PA_SHIFT; + + /* paranoia checks */ + if (pa != (chippa << IBA7220_TID_PA_SHIFT)) { + qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", + pa); + return; + } + if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) { + qib_dev_err(dd, "Physical page address 0x%lx " + "larger than supported\n", pa); + return; + } + + if (type == RCVHQ_RCV_TYPE_EAGER) + chippa |= dd->tidtemplate; + else /* for now, always full 4KB page */ + chippa |= IBA7220_TID_SZ_4K; + pa = chippa; + } + writeq(pa, tidptr); + mmiowb(); +} + +/** + * qib_7220_clear_tids - clear all TID entries for a ctxt, expected and eager + * @dd: the qlogic_ib device + * @ctxt: the ctxt + * + * clear all TID entries for a ctxt, expected and eager. + * Used from qib_close(). On this chip, TIDs are only 32 bits, + * not 64, but they are still on 64 bit boundaries, so tidbase + * is declared as u64 * for the pointer math, even though we write 32 bits + */ +static void qib_7220_clear_tids(struct qib_devdata *dd, + struct qib_ctxtdata *rcd) +{ + u64 __iomem *tidbase; + unsigned long tidinv; + u32 ctxt; + int i; + + if (!dd->kregbase || !rcd) + return; + + ctxt = rcd->ctxt; + + tidinv = dd->tidinvalid; + tidbase = (u64 __iomem *) + ((char __iomem *)(dd->kregbase) + + dd->rcvtidbase + + ctxt * dd->rcvtidcnt * sizeof(*tidbase)); + + for (i = 0; i < dd->rcvtidcnt; i++) + qib_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, + tidinv); + + tidbase = (u64 __iomem *) + ((char __iomem *)(dd->kregbase) + + dd->rcvegrbase + + rcd->rcvegr_tid_base * sizeof(*tidbase)); + + for (i = 0; i < rcd->rcvegrcnt; i++) + qib_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, + tidinv); +} + +/** + * qib_7220_tidtemplate - setup constants for TID updates + * @dd: the qlogic_ib device + * + * We setup stuff that we use a lot, to avoid calculating each time + */ +static void qib_7220_tidtemplate(struct qib_devdata *dd) +{ + if (dd->rcvegrbufsize == 2048) + dd->tidtemplate = IBA7220_TID_SZ_2K; + else if (dd->rcvegrbufsize == 4096) + dd->tidtemplate = IBA7220_TID_SZ_4K; + dd->tidinvalid = 0; +} + +/** + * qib_init_7220_get_base_info - set chip-specific flags for user code + * @rcd: the qlogic_ib ctxt + * @kbase: qib_base_info pointer + * + * We set the PCIE flag because the lower bandwidth on PCIe vs + * HyperTransport can affect some user packet algorithims. + */ +static int qib_7220_get_base_info(struct qib_ctxtdata *rcd, + struct qib_base_info *kinfo) +{ + kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE | + QIB_RUNTIME_NODMA_RTAIL | QIB_RUNTIME_SDMA; + + if (rcd->dd->flags & QIB_USE_SPCL_TRIG) + kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; + + return 0; +} + +static struct qib_message_header * +qib_7220_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) +{ + u32 offset = qib_hdrget_offset(rhf_addr); + + return (struct qib_message_header *) + (rhf_addr - dd->rhf_offset + offset); +} + +static void qib_7220_config_ctxts(struct qib_devdata *dd) +{ + unsigned long flags; + u32 nchipctxts; + + nchipctxts = qib_read_kreg32(dd, kr_portcnt); + dd->cspec->numctxts = nchipctxts; + if (qib_n_krcv_queues > 1) { + dd->qpn_mask = 0x3f; + dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports; + if (dd->first_user_ctxt > nchipctxts) + dd->first_user_ctxt = nchipctxts; + } else + dd->first_user_ctxt = dd->num_pports; + dd->n_krcv_queues = dd->first_user_ctxt; + + if (!qib_cfgctxts) { + int nctxts = dd->first_user_ctxt + num_online_cpus(); + + if (nctxts <= 5) + dd->ctxtcnt = 5; + else if (nctxts <= 9) + dd->ctxtcnt = 9; + else if (nctxts <= nchipctxts) + dd->ctxtcnt = nchipctxts; + } else if (qib_cfgctxts <= nchipctxts) + dd->ctxtcnt = qib_cfgctxts; + if (!dd->ctxtcnt) /* none of the above, set to max */ + dd->ctxtcnt = nchipctxts; + + /* + * Chip can be configured for 5, 9, or 17 ctxts, and choice + * affects number of eager TIDs per ctxt (1K, 2K, 4K). + * Lock to be paranoid about later motion, etc. + */ + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + if (dd->ctxtcnt > 9) + dd->rcvctrl |= 2ULL << IBA7220_R_CTXTCFG_SHIFT; + else if (dd->ctxtcnt > 5) + dd->rcvctrl |= 1ULL << IBA7220_R_CTXTCFG_SHIFT; + /* else configure for default 5 receive ctxts */ + if (dd->qpn_mask) + dd->rcvctrl |= 1ULL << QIB_7220_RcvCtrl_RcvQPMapEnable_LSB; + qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); + + /* kr_rcvegrcnt changes based on the number of contexts enabled */ + dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); + dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, IBA7220_KRCVEGRCNT); +} + +static int qib_7220_get_ib_cfg(struct qib_pportdata *ppd, int which) +{ + int lsb, ret = 0; + u64 maskr; /* right-justified mask */ + + switch (which) { + case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ + ret = ppd->link_width_enabled; + goto done; + + case QIB_IB_CFG_LWID: /* Get currently active Link-width */ + ret = ppd->link_width_active; + goto done; + + case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ + ret = ppd->link_speed_enabled; + goto done; + + case QIB_IB_CFG_SPD: /* Get current Link spd */ + ret = ppd->link_speed_active; + goto done; + + case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ + lsb = IBA7220_IBC_RXPOL_SHIFT; + maskr = IBA7220_IBC_RXPOL_MASK; + break; + + case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ + lsb = IBA7220_IBC_LREV_SHIFT; + maskr = IBA7220_IBC_LREV_MASK; + break; + + case QIB_IB_CFG_LINKLATENCY: + ret = qib_read_kreg64(ppd->dd, kr_ibcddrstatus) + & IBA7220_DDRSTAT_LINKLAT_MASK; + goto done; + + case QIB_IB_CFG_OP_VLS: + ret = ppd->vls_operational; + goto done; + + case QIB_IB_CFG_VL_HIGH_CAP: + ret = 0; + goto done; + + case QIB_IB_CFG_VL_LOW_CAP: + ret = 0; + goto done; + + case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + ret = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl, + OverrunThreshold); + goto done; + + case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + ret = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl, + PhyerrThreshold); + goto done; + + case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* will only take effect when the link state changes */ + ret = (ppd->cpspec->ibcctrl & + SYM_MASK(IBCCtrl, LinkDownDefaultState)) ? + IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; + goto done; + + case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ + lsb = IBA7220_IBC_HRTBT_SHIFT; + maskr = IBA7220_IBC_HRTBT_MASK; + break; + + case QIB_IB_CFG_PMA_TICKS: + /* + * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs + * Since the clock is always 250MHz, the value is 1 or 0. + */ + ret = (ppd->link_speed_active == QIB_IB_DDR); + goto done; + + default: + ret = -EINVAL; + goto done; + } + ret = (int)((ppd->cpspec->ibcddrctrl >> lsb) & maskr); +done: + return ret; +} + +static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) +{ + struct qib_devdata *dd = ppd->dd; + u64 maskr; /* right-justified mask */ + int lsb, ret = 0, setforce = 0; + u16 lcmd, licmd; + unsigned long flags; + + switch (which) { + case QIB_IB_CFG_LIDLMC: + /* + * Set LID and LMC. Combined to avoid possible hazard + * caller puts LMC in 16MSbits, DLID in 16LSbits of val + */ + lsb = IBA7220_IBC_DLIDLMC_SHIFT; + maskr = IBA7220_IBC_DLIDLMC_MASK; + break; + + case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ + /* + * As with speed, only write the actual register if + * the link is currently down, otherwise takes effect + * on next link change. + */ + ppd->link_width_enabled = val; + if (!(ppd->lflags & QIBL_LINKDOWN)) + goto bail; + /* + * We set the QIBL_IB_FORCE_NOTIFY bit so updown + * will get called because we want update + * link_width_active, and the change may not take + * effect for some time (if we are in POLL), so this + * flag will force the updown routine to be called + * on the next ibstatuschange down interrupt, even + * if it's not an down->up transition. + */ + val--; /* convert from IB to chip */ + maskr = IBA7220_IBC_WIDTH_MASK; + lsb = IBA7220_IBC_WIDTH_SHIFT; + setforce = 1; + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_FORCE_NOTIFY; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + break; + + case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ + /* + * If we turn off IB1.2, need to preset SerDes defaults, + * but not right now. Set a flag for the next time + * we command the link down. As with width, only write the + * actual register if the link is currently down, otherwise + * takes effect on next link change. Since setting is being + * explictly requested (via MAD or sysfs), clear autoneg + * failure status if speed autoneg is enabled. + */ + ppd->link_speed_enabled = val; + if ((ppd->cpspec->ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK) && + !(val & (val - 1))) + dd->cspec->presets_needed = 1; + if (!(ppd->lflags & QIBL_LINKDOWN)) + goto bail; + /* + * We set the QIBL_IB_FORCE_NOTIFY bit so updown + * will get called because we want update + * link_speed_active, and the change may not take + * effect for some time (if we are in POLL), so this + * flag will force the updown routine to be called + * on the next ibstatuschange down interrupt, even + * if it's not an down->up transition. + */ + if (val == (QIB_IB_SDR | QIB_IB_DDR)) { + val = IBA7220_IBC_SPEED_AUTONEG_MASK | + IBA7220_IBC_IBTA_1_2_MASK; + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else + val = val == QIB_IB_DDR ? + IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR; + maskr = IBA7220_IBC_SPEED_AUTONEG_MASK | + IBA7220_IBC_IBTA_1_2_MASK; + /* IBTA 1.2 mode + speed bits are contiguous */ + lsb = SYM_LSB(IBCDDRCtrl, IB_ENHANCED_MODE); + setforce = 1; + break; + + case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ + lsb = IBA7220_IBC_RXPOL_SHIFT; + maskr = IBA7220_IBC_RXPOL_MASK; + break; + + case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ + lsb = IBA7220_IBC_LREV_SHIFT; + maskr = IBA7220_IBC_LREV_MASK; + break; + + case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + maskr = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl, + OverrunThreshold); + if (maskr != val) { + ppd->cpspec->ibcctrl &= + ~SYM_MASK(IBCCtrl, OverrunThreshold); + ppd->cpspec->ibcctrl |= (u64) val << + SYM_LSB(IBCCtrl, OverrunThreshold); + qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + goto bail; + + case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + maskr = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl, + PhyerrThreshold); + if (maskr != val) { + ppd->cpspec->ibcctrl &= + ~SYM_MASK(IBCCtrl, PhyerrThreshold); + ppd->cpspec->ibcctrl |= (u64) val << + SYM_LSB(IBCCtrl, PhyerrThreshold); + qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + goto bail; + + case QIB_IB_CFG_PKEYS: /* update pkeys */ + maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | + ((u64) ppd->pkeys[2] << 32) | + ((u64) ppd->pkeys[3] << 48); + qib_write_kreg(dd, kr_partitionkey, maskr); + goto bail; + + case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* will only take effect when the link state changes */ + if (val == IB_LINKINITCMD_POLL) + ppd->cpspec->ibcctrl &= + ~SYM_MASK(IBCCtrl, LinkDownDefaultState); + else /* SLEEP */ + ppd->cpspec->ibcctrl |= + SYM_MASK(IBCCtrl, LinkDownDefaultState); + qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + goto bail; + + case QIB_IB_CFG_MTU: /* update the MTU in IBC */ + /* + * Update our housekeeping variables, and set IBC max + * size, same as init code; max IBC is max we allow in + * buffer, less the qword pbc, plus 1 for ICRC, in dwords + * Set even if it's unchanged, print debug message only + * on changes. + */ + val = (ppd->ibmaxlen >> 2) + 1; + ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen); + ppd->cpspec->ibcctrl |= (u64)val << SYM_LSB(IBCCtrl, MaxPktLen); + qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + goto bail; + + case QIB_IB_CFG_LSTATE: /* set the IB link state */ + switch (val & 0xffff0000) { + case IB_LINKCMD_DOWN: + lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; + if (!ppd->cpspec->ibdeltainprog && + qib_compat_ddr_negotiate) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = + read_7220_creg32(dd, cr_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = + read_7220_creg32(dd, cr_iblinkerrrecov); + } + break; + + case IB_LINKCMD_ARMED: + lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; + break; + + case IB_LINKCMD_ACTIVE: + lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; + break; + + default: + ret = -EINVAL; + qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); + goto bail; + } + switch (val & 0xffff) { + case IB_LINKINITCMD_NOP: + licmd = 0; + break; + + case IB_LINKINITCMD_POLL: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; + break; + + case IB_LINKINITCMD_SLEEP: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; + break; + + case IB_LINKINITCMD_DISABLE: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; + ppd->cpspec->chase_end = 0; + /* + * stop state chase counter and timer, if running. + * wait forpending timer, but don't clear .data (ppd)! + */ + if (ppd->cpspec->chase_timer.expires) { + del_timer_sync(&ppd->cpspec->chase_timer); + ppd->cpspec->chase_timer.expires = 0; + } + break; + + default: + ret = -EINVAL; + qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", + val & 0xffff); + goto bail; + } + qib_set_ib_7220_lstate(ppd, lcmd, licmd); + goto bail; + + case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ + if (val > IBA7220_IBC_HRTBT_MASK) { + ret = -EINVAL; + goto bail; + } + lsb = IBA7220_IBC_HRTBT_SHIFT; + maskr = IBA7220_IBC_HRTBT_MASK; + break; + + default: + ret = -EINVAL; + goto bail; + } + ppd->cpspec->ibcddrctrl &= ~(maskr << lsb); + ppd->cpspec->ibcddrctrl |= (((u64) val & maskr) << lsb); + qib_write_kreg(dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl); + qib_write_kreg(dd, kr_scratch, 0); + if (setforce) { + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_FORCE_NOTIFY; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } +bail: + return ret; +} + +static int qib_7220_set_loopback(struct qib_pportdata *ppd, const char *what) +{ + int ret = 0; + u64 val, ddr; + + if (!strncmp(what, "ibc", 3)) { + ppd->cpspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback); + val = 0; /* disable heart beat, so link will come up */ + qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", + ppd->dd->unit, ppd->port); + } else if (!strncmp(what, "off", 3)) { + ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback); + /* enable heart beat again */ + val = IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT; + qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback " + "(normal)\n", ppd->dd->unit, ppd->port); + } else + ret = -EINVAL; + if (!ret) { + qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->cpspec->ibcctrl); + ddr = ppd->cpspec->ibcddrctrl & ~(IBA7220_IBC_HRTBT_MASK + << IBA7220_IBC_HRTBT_SHIFT); + ppd->cpspec->ibcddrctrl = ddr | val; + qib_write_kreg(ppd->dd, kr_ibcddrctrl, + ppd->cpspec->ibcddrctrl); + qib_write_kreg(ppd->dd, kr_scratch, 0); + } + return ret; +} + +static void qib_update_7220_usrhead(struct qib_ctxtdata *rcd, u64 hd, + u32 updegr, u32 egrhd) +{ + qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); + if (updegr) + qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); +} + +static u32 qib_7220_hdrqempty(struct qib_ctxtdata *rcd) +{ + u32 head, tail; + + head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); + if (rcd->rcvhdrtail_kvaddr) + tail = qib_get_rcvhdrtail(rcd); + else + tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); + return head == tail; +} + +/* + * Modify the RCVCTRL register in chip-specific way. This + * is a function because bit positions and (future) register + * location is chip-specifc, but the needed operations are + * generic. <op> is a bit-mask because we often want to + * do multiple modifications. + */ +static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op, + int ctxt) +{ + struct qib_devdata *dd = ppd->dd; + u64 mask, val; + unsigned long flags; + + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + if (op & QIB_RCVCTRL_TAILUPD_ENB) + dd->rcvctrl |= (1ULL << IBA7220_R_TAILUPD_SHIFT); + if (op & QIB_RCVCTRL_TAILUPD_DIS) + dd->rcvctrl &= ~(1ULL << IBA7220_R_TAILUPD_SHIFT); + if (op & QIB_RCVCTRL_PKEY_ENB) + dd->rcvctrl &= ~(1ULL << IBA7220_R_PKEY_DIS_SHIFT); + if (op & QIB_RCVCTRL_PKEY_DIS) + dd->rcvctrl |= (1ULL << IBA7220_R_PKEY_DIS_SHIFT); + if (ctxt < 0) + mask = (1ULL << dd->ctxtcnt) - 1; + else + mask = (1ULL << ctxt); + if (op & QIB_RCVCTRL_CTXT_ENB) { + /* always done for specific ctxt */ + dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable)); + if (!(dd->flags & QIB_NODMA_RTAIL)) + dd->rcvctrl |= 1ULL << IBA7220_R_TAILUPD_SHIFT; + /* Write these registers before the context is enabled. */ + qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, + dd->rcd[ctxt]->rcvhdrqtailaddr_phys); + qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, + dd->rcd[ctxt]->rcvhdrq_phys); + dd->rcd[ctxt]->seq_cnt = 1; + } + if (op & QIB_RCVCTRL_CTXT_DIS) + dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable)); + if (op & QIB_RCVCTRL_INTRAVAIL_ENB) + dd->rcvctrl |= (mask << IBA7220_R_INTRAVAIL_SHIFT); + if (op & QIB_RCVCTRL_INTRAVAIL_DIS) + dd->rcvctrl &= ~(mask << IBA7220_R_INTRAVAIL_SHIFT); + qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); + if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) { + /* arm rcv interrupt */ + val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) | + dd->rhdrhead_intr_off; + qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); + } + if (op & QIB_RCVCTRL_CTXT_ENB) { + /* + * Init the context registers also; if we were + * disabled, tail and head should both be zero + * already from the enable, but since we don't + * know, we have to do it explictly. + */ + val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); + qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); + + val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); + dd->rcd[ctxt]->head = val; + /* If kctxt, interrupt on next receive. */ + if (ctxt < dd->first_user_ctxt) + val |= dd->rhdrhead_intr_off; + qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); + } + if (op & QIB_RCVCTRL_CTXT_DIS) { + if (ctxt >= 0) { + qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, 0); + qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, 0); + } else { + unsigned i; + + for (i = 0; i < dd->cfgctxts; i++) { + qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, + i, 0); + qib_write_kreg_ctxt(dd, kr_rcvhdraddr, i, 0); + } + } + } + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); +} + +/* + * Modify the SENDCTRL register in chip-specific way. This + * is a function there may be multiple such registers with + * slightly different layouts. To start, we assume the + * "canonical" register layout of the first chips. + * Chip requires no back-back sendctrl writes, so write + * scratch register after writing sendctrl + */ +static void sendctrl_7220_mod(struct qib_pportdata *ppd, u32 op) +{ + struct qib_devdata *dd = ppd->dd; + u64 tmp_dd_sendctrl; + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + + /* First the ones that are "sticky", saved in shadow */ + if (op & QIB_SENDCTRL_CLEAR) + dd->sendctrl = 0; + if (op & QIB_SENDCTRL_SEND_DIS) + dd->sendctrl &= ~SYM_MASK(SendCtrl, SPioEnable); + else if (op & QIB_SENDCTRL_SEND_ENB) { + dd->sendctrl |= SYM_MASK(SendCtrl, SPioEnable); + if (dd->flags & QIB_USE_SPCL_TRIG) + dd->sendctrl |= SYM_MASK(SendCtrl, + SSpecialTriggerEn); + } + if (op & QIB_SENDCTRL_AVAIL_DIS) + dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); + else if (op & QIB_SENDCTRL_AVAIL_ENB) + dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); + + if (op & QIB_SENDCTRL_DISARM_ALL) { + u32 i, last; + + tmp_dd_sendctrl = dd->sendctrl; + /* + * disarm any that are not yet launched, disabling sends + * and updates until done. + */ + last = dd->piobcnt2k + dd->piobcnt4k; + tmp_dd_sendctrl &= + ~(SYM_MASK(SendCtrl, SPioEnable) | + SYM_MASK(SendCtrl, SendBufAvailUpd)); + for (i = 0; i < last; i++) { + qib_write_kreg(dd, kr_sendctrl, + tmp_dd_sendctrl | + SYM_MASK(SendCtrl, Disarm) | i); + qib_write_kreg(dd, kr_scratch, 0); + } + } + + tmp_dd_sendctrl = dd->sendctrl; + + if (op & QIB_SENDCTRL_FLUSH) + tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort); + if (op & QIB_SENDCTRL_DISARM) + tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | + ((op & QIB_7220_SendCtrl_DisarmPIOBuf_RMASK) << + SYM_LSB(SendCtrl, DisarmPIOBuf)); + if ((op & QIB_SENDCTRL_AVAIL_BLIP) && + (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) + tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); + + qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + + if (op & QIB_SENDCTRL_AVAIL_BLIP) { + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + + if (op & QIB_SENDCTRL_FLUSH) { + u32 v; + /* + * ensure writes have hit chip, then do a few + * more reads, to allow DMA of pioavail registers + * to occur, so in-memory copy is in sync with + * the chip. Not always safe to sleep. + */ + v = qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_scratch, v); + v = qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_scratch, v); + qib_read_kreg32(dd, kr_scratch); + } +} + +/** + * qib_portcntr_7220 - read a per-port counter + * @dd: the qlogic_ib device + * @creg: the counter to snapshot + */ +static u64 qib_portcntr_7220(struct qib_pportdata *ppd, u32 reg) +{ + u64 ret = 0ULL; + struct qib_devdata *dd = ppd->dd; + u16 creg; + /* 0xffff for unimplemented or synthesized counters */ + static const u16 xlator[] = { + [QIBPORTCNTR_PKTSEND] = cr_pktsend, + [QIBPORTCNTR_WORDSEND] = cr_wordsend, + [QIBPORTCNTR_PSXMITDATA] = cr_psxmitdatacount, + [QIBPORTCNTR_PSXMITPKTS] = cr_psxmitpktscount, + [QIBPORTCNTR_PSXMITWAIT] = cr_psxmitwaitcount, + [QIBPORTCNTR_SENDSTALL] = cr_sendstall, + [QIBPORTCNTR_PKTRCV] = cr_pktrcv, + [QIBPORTCNTR_PSRCVDATA] = cr_psrcvdatacount, + [QIBPORTCNTR_PSRCVPKTS] = cr_psrcvpktscount, + [QIBPORTCNTR_RCVEBP] = cr_rcvebp, + [QIBPORTCNTR_RCVOVFL] = cr_rcvovfl, + [QIBPORTCNTR_WORDRCV] = cr_wordrcv, + [QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt, + [QIBPORTCNTR_RXLOCALPHYERR] = cr_rxotherlocalphyerr, + [QIBPORTCNTR_RXVLERR] = cr_rxvlerr, + [QIBPORTCNTR_ERRICRC] = cr_erricrc, + [QIBPORTCNTR_ERRVCRC] = cr_errvcrc, + [QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc, + [QIBPORTCNTR_BADFORMAT] = cr_badformat, + [QIBPORTCNTR_ERR_RLEN] = cr_err_rlen, + [QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr, + [QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen, + [QIBPORTCNTR_UNSUPVL] = cr_txunsupvl, + [QIBPORTCNTR_EXCESSBUFOVFL] = cr_excessbufferovfl, + [QIBPORTCNTR_ERRLINK] = cr_errlink, + [QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown, + [QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov, + [QIBPORTCNTR_LLI] = cr_locallinkintegrityerr, + [QIBPORTCNTR_PSINTERVAL] = cr_psinterval, + [QIBPORTCNTR_PSSTART] = cr_psstart, + [QIBPORTCNTR_PSSTAT] = cr_psstat, + [QIBPORTCNTR_VL15PKTDROP] = cr_vl15droppedpkt, + [QIBPORTCNTR_ERRPKEY] = cr_errpkey, + [QIBPORTCNTR_KHDROVFL] = 0xffff, + }; + + if (reg >= ARRAY_SIZE(xlator)) { + qib_devinfo(ppd->dd->pcidev, + "Unimplemented portcounter %u\n", reg); + goto done; + } + creg = xlator[reg]; + + if (reg == QIBPORTCNTR_KHDROVFL) { + int i; + + /* sum over all kernel contexts */ + for (i = 0; i < dd->first_user_ctxt; i++) + ret += read_7220_creg32(dd, cr_portovfl + i); + } + if (creg == 0xffff) + goto done; + + /* + * only fast incrementing counters are 64bit; use 32 bit reads to + * avoid two independent reads when on opteron + */ + if ((creg == cr_wordsend || creg == cr_wordrcv || + creg == cr_pktsend || creg == cr_pktrcv)) + ret = read_7220_creg(dd, creg); + else + ret = read_7220_creg32(dd, creg); + if (creg == cr_ibsymbolerr) { + if (dd->pport->cpspec->ibdeltainprog) + ret -= ret - ppd->cpspec->ibsymsnap; + ret -= dd->pport->cpspec->ibsymdelta; + } else if (creg == cr_iblinkerrrecov) { + if (dd->pport->cpspec->ibdeltainprog) + ret -= ret - ppd->cpspec->iblnkerrsnap; + ret -= dd->pport->cpspec->iblnkerrdelta; + } +done: + return ret; +} + +/* + * Device counter names (not port-specific), one line per stat, + * single string. Used by utilities like ipathstats to print the stats + * in a way which works for different versions of drivers, without changing + * the utility. Names need to be 12 chars or less (w/o newline), for proper + * display by utility. + * Non-error counters are first. + * Start of "error" conters is indicated by a leading "E " on the first + * "error" counter, and doesn't count in label length. + * The EgrOvfl list needs to be last so we truncate them at the configured + * context count for the device. + * cntr7220indices contains the corresponding register indices. + */ +static const char cntr7220names[] = + "Interrupts\n" + "HostBusStall\n" + "E RxTIDFull\n" + "RxTIDInvalid\n" + "Ctxt0EgrOvfl\n" + "Ctxt1EgrOvfl\n" + "Ctxt2EgrOvfl\n" + "Ctxt3EgrOvfl\n" + "Ctxt4EgrOvfl\n" + "Ctxt5EgrOvfl\n" + "Ctxt6EgrOvfl\n" + "Ctxt7EgrOvfl\n" + "Ctxt8EgrOvfl\n" + "Ctxt9EgrOvfl\n" + "Ctx10EgrOvfl\n" + "Ctx11EgrOvfl\n" + "Ctx12EgrOvfl\n" + "Ctx13EgrOvfl\n" + "Ctx14EgrOvfl\n" + "Ctx15EgrOvfl\n" + "Ctx16EgrOvfl\n"; + +static const size_t cntr7220indices[] = { + cr_lbint, + cr_lbflowstall, + cr_errtidfull, + cr_errtidvalid, + cr_portovfl + 0, + cr_portovfl + 1, + cr_portovfl + 2, + cr_portovfl + 3, + cr_portovfl + 4, + cr_portovfl + 5, + cr_portovfl + 6, + cr_portovfl + 7, + cr_portovfl + 8, + cr_portovfl + 9, + cr_portovfl + 10, + cr_portovfl + 11, + cr_portovfl + 12, + cr_portovfl + 13, + cr_portovfl + 14, + cr_portovfl + 15, + cr_portovfl + 16, +}; + +/* + * same as cntr7220names and cntr7220indices, but for port-specific counters. + * portcntr7220indices is somewhat complicated by some registers needing + * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG + */ +static const char portcntr7220names[] = + "TxPkt\n" + "TxFlowPkt\n" + "TxWords\n" + "RxPkt\n" + "RxFlowPkt\n" + "RxWords\n" + "TxFlowStall\n" + "TxDmaDesc\n" /* 7220 and 7322-only */ + "E RxDlidFltr\n" /* 7220 and 7322-only */ + "IBStatusChng\n" + "IBLinkDown\n" + "IBLnkRecov\n" + "IBRxLinkErr\n" + "IBSymbolErr\n" + "RxLLIErr\n" + "RxBadFormat\n" + "RxBadLen\n" + "RxBufOvrfl\n" + "RxEBP\n" + "RxFlowCtlErr\n" + "RxICRCerr\n" + "RxLPCRCerr\n" + "RxVCRCerr\n" + "RxInvalLen\n" + "RxInvalPKey\n" + "RxPktDropped\n" + "TxBadLength\n" + "TxDropped\n" + "TxInvalLen\n" + "TxUnderrun\n" + "TxUnsupVL\n" + "RxLclPhyErr\n" /* 7220 and 7322-only */ + "RxVL15Drop\n" /* 7220 and 7322-only */ + "RxVlErr\n" /* 7220 and 7322-only */ + "XcessBufOvfl\n" /* 7220 and 7322-only */ + ; + +#define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */ +static const size_t portcntr7220indices[] = { + QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, + cr_pktsendflow, + QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, + QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, + cr_pktrcvflowctrl, + QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, + QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, + cr_txsdmadesc, + cr_rxdlidfltr, + cr_ibstatuschange, + QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, + QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, + QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, + QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, + QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, + QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, + cr_rcvflowctrl_err, + QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, + QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, + cr_invalidslen, + cr_senddropped, + cr_errslen, + cr_sendunderrun, + cr_txunsupvl, + QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, + QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, +}; + +/* do all the setup to make the counter reads efficient later */ +static void init_7220_cntrnames(struct qib_devdata *dd) +{ + int i, j = 0; + char *s; + + for (i = 0, s = (char *)cntr7220names; s && j <= dd->cfgctxts; + i++) { + /* we always have at least one counter before the egrovfl */ + if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) + j = 1; + s = strchr(s + 1, '\n'); + if (s && j) + j++; + } + dd->cspec->ncntrs = i; + if (!s) + /* full list; size is without terminating null */ + dd->cspec->cntrnamelen = sizeof(cntr7220names) - 1; + else + dd->cspec->cntrnamelen = 1 + s - cntr7220names; + dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs + * sizeof(u64), GFP_KERNEL); + if (!dd->cspec->cntrs) + qib_dev_err(dd, "Failed allocation for counters\n"); + + for (i = 0, s = (char *)portcntr7220names; s; i++) + s = strchr(s + 1, '\n'); + dd->cspec->nportcntrs = i - 1; + dd->cspec->portcntrnamelen = sizeof(portcntr7220names) - 1; + dd->cspec->portcntrs = kmalloc(dd->cspec->nportcntrs + * sizeof(u64), GFP_KERNEL); + if (!dd->cspec->portcntrs) + qib_dev_err(dd, "Failed allocation for portcounters\n"); +} + +static u32 qib_read_7220cntrs(struct qib_devdata *dd, loff_t pos, char **namep, + u64 **cntrp) +{ + u32 ret; + + if (!dd->cspec->cntrs) { + ret = 0; + goto done; + } + + if (namep) { + *namep = (char *)cntr7220names; + ret = dd->cspec->cntrnamelen; + if (pos >= ret) + ret = 0; /* final read after getting everything */ + } else { + u64 *cntr = dd->cspec->cntrs; + int i; + + ret = dd->cspec->ncntrs * sizeof(u64); + if (!cntr || pos >= ret) { + /* everything read, or couldn't get memory */ + ret = 0; + goto done; + } + + *cntrp = cntr; + for (i = 0; i < dd->cspec->ncntrs; i++) + *cntr++ = read_7220_creg32(dd, cntr7220indices[i]); + } +done: + return ret; +} + +static u32 qib_read_7220portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, + char **namep, u64 **cntrp) +{ + u32 ret; + + if (!dd->cspec->portcntrs) { + ret = 0; + goto done; + } + if (namep) { + *namep = (char *)portcntr7220names; + ret = dd->cspec->portcntrnamelen; + if (pos >= ret) + ret = 0; /* final read after getting everything */ + } else { + u64 *cntr = dd->cspec->portcntrs; + struct qib_pportdata *ppd = &dd->pport[port]; + int i; + + ret = dd->cspec->nportcntrs * sizeof(u64); + if (!cntr || pos >= ret) { + /* everything read, or couldn't get memory */ + ret = 0; + goto done; + } + *cntrp = cntr; + for (i = 0; i < dd->cspec->nportcntrs; i++) { + if (portcntr7220indices[i] & _PORT_VIRT_FLAG) + *cntr++ = qib_portcntr_7220(ppd, + portcntr7220indices[i] & + ~_PORT_VIRT_FLAG); + else + *cntr++ = read_7220_creg32(dd, + portcntr7220indices[i]); + } + } +done: + return ret; +} + +/** + * qib_get_7220_faststats - get word counters from chip before they overflow + * @opaque - contains a pointer to the qlogic_ib device qib_devdata + * + * This needs more work; in particular, decision on whether we really + * need traffic_wds done the way it is + * called from add_timer + */ +static void qib_get_7220_faststats(unsigned long opaque) +{ + struct qib_devdata *dd = (struct qib_devdata *) opaque; + struct qib_pportdata *ppd = dd->pport; + unsigned long flags; + u64 traffic_wds; + + /* + * don't access the chip while running diags, or memory diags can + * fail + */ + if (!(dd->flags & QIB_INITTED) || dd->diag_client) + /* but re-arm the timer, for diags case; won't hurt other */ + goto done; + + /* + * We now try to maintain an activity timer, based on traffic + * exceeding a threshold, so we need to check the word-counts + * even if they are 64-bit. + */ + traffic_wds = qib_portcntr_7220(ppd, cr_wordsend) + + qib_portcntr_7220(ppd, cr_wordrcv); + spin_lock_irqsave(&dd->eep_st_lock, flags); + traffic_wds -= dd->traffic_wds; + dd->traffic_wds += traffic_wds; + if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD) + atomic_add(5, &dd->active_time); /* S/B #define */ + spin_unlock_irqrestore(&dd->eep_st_lock, flags); +done: + mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); +} + +/* + * If we are using MSI, try to fallback to INTx. + */ +static int qib_7220_intr_fallback(struct qib_devdata *dd) +{ + if (!dd->msi_lo) + return 0; + + qib_devinfo(dd->pcidev, "MSI interrupt not detected," + " trying INTx interrupts\n"); + qib_7220_free_irq(dd); + qib_enable_intx(dd->pcidev); + /* + * Some newer kernels require free_irq before disable_msi, + * and irq can be changed during disable and INTx enable + * and we need to therefore use the pcidev->irq value, + * not our saved MSI value. + */ + dd->cspec->irq = dd->pcidev->irq; + qib_setup_7220_interrupt(dd); + return 1; +} + +/* + * Reset the XGXS (between serdes and IBC). Slightly less intrusive + * than resetting the IBC or external link state, and useful in some + * cases to cause some retraining. To do this right, we reset IBC + * as well. + */ +static void qib_7220_xgxs_reset(struct qib_pportdata *ppd) +{ + u64 val, prev_val; + struct qib_devdata *dd = ppd->dd; + + prev_val = qib_read_kreg64(dd, kr_xgxs_cfg); + val = prev_val | QLOGIC_IB_XGXS_RESET; + prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */ + qib_write_kreg(dd, kr_control, + dd->control & ~QLOGIC_IB_C_LINKENABLE); + qib_write_kreg(dd, kr_xgxs_cfg, val); + qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_xgxs_cfg, prev_val); + qib_write_kreg(dd, kr_control, dd->control); +} + +/* + * For this chip, we want to use the same buffer every time + * when we are trying to bring the link up (they are always VL15 + * packets). At that link state the packet should always go out immediately + * (or at least be discarded at the tx interface if the link is down). + * If it doesn't, and the buffer isn't available, that means some other + * sender has gotten ahead of us, and is preventing our packet from going + * out. In that case, we flush all packets, and try again. If that still + * fails, we fail the request, and hope things work the next time around. + * + * We don't need very complicated heuristics on whether the packet had + * time to go out or not, since even at SDR 1X, it goes out in very short + * time periods, covered by the chip reads done here and as part of the + * flush. + */ +static u32 __iomem *get_7220_link_buf(struct qib_pportdata *ppd, u32 *bnum) +{ + u32 __iomem *buf; + u32 lbuf = ppd->dd->cspec->lastbuf_for_pio; + int do_cleanup; + unsigned long flags; + + /* + * always blip to get avail list updated, since it's almost + * always needed, and is fairly cheap. + */ + sendctrl_7220_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */ + buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf); + if (buf) + goto done; + + spin_lock_irqsave(&ppd->sdma_lock, flags); + if (ppd->sdma_state.current_state == qib_sdma_state_s20_idle && + ppd->sdma_state.current_state != qib_sdma_state_s00_hw_down) { + __qib_sdma_process_event(ppd, qib_sdma_event_e00_go_hw_down); + do_cleanup = 0; + } else { + do_cleanup = 1; + qib_7220_sdma_hw_clean_up(ppd); + } + spin_unlock_irqrestore(&ppd->sdma_lock, flags); + + if (do_cleanup) { + qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */ + buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf); + } +done: + return buf; +} + +/* + * This code for non-IBTA-compliant IB speed negotiation is only known to + * work for the SDR to DDR transition, and only between an HCA and a switch + * with recent firmware. It is based on observed heuristics, rather than + * actual knowledge of the non-compliant speed negotiation. + * It has a number of hard-coded fields, since the hope is to rewrite this + * when a spec is available on how the negoation is intended to work. + */ +static void autoneg_7220_sendpkt(struct qib_pportdata *ppd, u32 *hdr, + u32 dcnt, u32 *data) +{ + int i; + u64 pbc; + u32 __iomem *piobuf; + u32 pnum; + struct qib_devdata *dd = ppd->dd; + + i = 0; + pbc = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ + pbc |= PBC_7220_VL15_SEND; + while (!(piobuf = get_7220_link_buf(ppd, &pnum))) { + if (i++ > 5) + return; + udelay(2); + } + sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_DISARM_BUF(pnum)); + writeq(pbc, piobuf); + qib_flush_wc(); + qib_pio_copy(piobuf + 2, hdr, 7); + qib_pio_copy(piobuf + 9, data, dcnt); + if (dd->flags & QIB_USE_SPCL_TRIG) { + u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; + + qib_flush_wc(); + __raw_writel(0xaebecede, piobuf + spcl_off); + } + qib_flush_wc(); + qib_sendbuf_done(dd, pnum); +} + +/* + * _start packet gets sent twice at start, _done gets sent twice at end + */ +static void autoneg_7220_send(struct qib_pportdata *ppd, int which) +{ + struct qib_devdata *dd = ppd->dd; + static u32 swapped; + u32 dw, i, hcnt, dcnt, *data; + static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; + static u32 madpayload_start[0x40] = { + 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, + 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, + 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ + }; + static u32 madpayload_done[0x40] = { + 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, + 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, + 0x40000001, 0x1388, 0x15e, /* rest 0's */ + }; + + dcnt = ARRAY_SIZE(madpayload_start); + hcnt = ARRAY_SIZE(hdr); + if (!swapped) { + /* for maintainability, do it at runtime */ + for (i = 0; i < hcnt; i++) { + dw = (__force u32) cpu_to_be32(hdr[i]); + hdr[i] = dw; + } + for (i = 0; i < dcnt; i++) { + dw = (__force u32) cpu_to_be32(madpayload_start[i]); + madpayload_start[i] = dw; + dw = (__force u32) cpu_to_be32(madpayload_done[i]); + madpayload_done[i] = dw; + } + swapped = 1; + } + + data = which ? madpayload_done : madpayload_start; + + autoneg_7220_sendpkt(ppd, hdr, dcnt, data); + qib_read_kreg64(dd, kr_scratch); + udelay(2); + autoneg_7220_sendpkt(ppd, hdr, dcnt, data); + qib_read_kreg64(dd, kr_scratch); + udelay(2); +} + +/* + * Do the absolute minimum to cause an IB speed change, and make it + * ready, but don't actually trigger the change. The caller will + * do that when ready (if link is in Polling training state, it will + * happen immediately, otherwise when link next goes down) + * + * This routine should only be used as part of the DDR autonegotation + * code for devices that are not compliant with IB 1.2 (or code that + * fixes things up for same). + * + * When link has gone down, and autoneg enabled, or autoneg has + * failed and we give up until next time we set both speeds, and + * then we want IBTA enabled as well as "use max enabled speed. + */ +static void set_7220_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) +{ + ppd->cpspec->ibcddrctrl &= ~(IBA7220_IBC_SPEED_AUTONEG_MASK | + IBA7220_IBC_IBTA_1_2_MASK); + + if (speed == (QIB_IB_SDR | QIB_IB_DDR)) + ppd->cpspec->ibcddrctrl |= IBA7220_IBC_SPEED_AUTONEG_MASK | + IBA7220_IBC_IBTA_1_2_MASK; + else + ppd->cpspec->ibcddrctrl |= speed == QIB_IB_DDR ? + IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR; + + qib_write_kreg(ppd->dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl); + qib_write_kreg(ppd->dd, kr_scratch, 0); +} + +/* + * This routine is only used when we are not talking to another + * IB 1.2-compliant device that we think can do DDR. + * (This includes all existing switch chips as of Oct 2007.) + * 1.2-compliant devices go directly to DDR prior to reaching INIT + */ +static void try_7220_autoneg(struct qib_pportdata *ppd) +{ + unsigned long flags; + + /* + * Required for older non-IB1.2 DDR switches. Newer + * non-IB-compliant switches don't need it, but so far, + * aren't bothered by it either. "Magic constant" + */ + qib_write_kreg(ppd->dd, kr_ncmodectrl, 0x3b9dc07); + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_AUTONEG_INPROG; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + autoneg_7220_send(ppd, 0); + set_7220_ibspeed_fast(ppd, QIB_IB_DDR); + + toggle_7220_rclkrls(ppd->dd); + /* 2 msec is minimum length of a poll cycle */ + schedule_delayed_work(&ppd->cpspec->autoneg_work, + msecs_to_jiffies(2)); +} + +/* + * Handle the empirically determined mechanism for auto-negotiation + * of DDR speed with switches. + */ +static void autoneg_7220_work(struct work_struct *work) +{ + struct qib_pportdata *ppd; + struct qib_devdata *dd; + u64 startms; + u32 i; + unsigned long flags; + + ppd = &container_of(work, struct qib_chippport_specific, + autoneg_work.work)->pportdata; + dd = ppd->dd; + + startms = jiffies_to_msecs(jiffies); + + /* + * Busy wait for this first part, it should be at most a + * few hundred usec, since we scheduled ourselves for 2msec. + */ + for (i = 0; i < 25; i++) { + if (SYM_FIELD(ppd->lastibcstat, IBCStatus, LinkTrainingState) + == IB_7220_LT_STATE_POLLQUIET) { + qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); + break; + } + udelay(100); + } + + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) + goto done; /* we got there early or told to stop */ + + /* we expect this to timeout */ + if (wait_event_timeout(ppd->cpspec->autoneg_wait, + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), + msecs_to_jiffies(90))) + goto done; + + toggle_7220_rclkrls(dd); + + /* we expect this to timeout */ + if (wait_event_timeout(ppd->cpspec->autoneg_wait, + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), + msecs_to_jiffies(1700))) + goto done; + + set_7220_ibspeed_fast(ppd, QIB_IB_SDR); + toggle_7220_rclkrls(dd); + + /* + * Wait up to 250 msec for link to train and get to INIT at DDR; + * this should terminate early. + */ + wait_event_timeout(ppd->cpspec->autoneg_wait, + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), + msecs_to_jiffies(250)); +done: + if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; + if (dd->cspec->autoneg_tries == AUTONEG_TRIES) { + ppd->lflags |= QIBL_IB_AUTONEG_FAILED; + dd->cspec->autoneg_tries = 0; + } + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + set_7220_ibspeed_fast(ppd, ppd->link_speed_enabled); + } +} + +static u32 qib_7220_iblink_state(u64 ibcs) +{ + u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState); + + switch (state) { + case IB_7220_L_STATE_INIT: + state = IB_PORT_INIT; + break; + case IB_7220_L_STATE_ARM: + state = IB_PORT_ARMED; + break; + case IB_7220_L_STATE_ACTIVE: + /* fall through */ + case IB_7220_L_STATE_ACT_DEFER: + state = IB_PORT_ACTIVE; + break; + default: /* fall through */ + case IB_7220_L_STATE_DOWN: + state = IB_PORT_DOWN; + break; + } + return state; +} + +/* returns the IBTA port state, rather than the IBC link training state */ +static u8 qib_7220_phys_portstate(u64 ibcs) +{ + u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState); + return qib_7220_physportstate[state]; +} + +static int qib_7220_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) +{ + int ret = 0, symadj = 0; + struct qib_devdata *dd = ppd->dd; + unsigned long flags; + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + + if (!ibup) { + /* + * When the link goes down we don't want AEQ running, so it + * won't interfere with IBC training, etc., and we need + * to go back to the static SerDes preset values. + */ + if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | + QIBL_IB_AUTONEG_INPROG))) + set_7220_ibspeed_fast(ppd, ppd->link_speed_enabled); + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + qib_sd7220_presets(dd); + qib_cancel_sends(ppd); /* initial disarm, etc. */ + spin_lock_irqsave(&ppd->sdma_lock, flags); + if (__qib_sdma_running(ppd)) + __qib_sdma_process_event(ppd, + qib_sdma_event_e70_go_idle); + spin_unlock_irqrestore(&ppd->sdma_lock, flags); + } + /* this might better in qib_sd7220_presets() */ + set_7220_relock_poll(dd, ibup); + } else { + if (qib_compat_ddr_negotiate && + !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | + QIBL_IB_AUTONEG_INPROG)) && + ppd->link_speed_active == QIB_IB_SDR && + (ppd->link_speed_enabled & (QIB_IB_DDR | QIB_IB_SDR)) == + (QIB_IB_DDR | QIB_IB_SDR) && + dd->cspec->autoneg_tries < AUTONEG_TRIES) { + /* we are SDR, and DDR auto-negotiation enabled */ + ++dd->cspec->autoneg_tries; + if (!ppd->cpspec->ibdeltainprog) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = read_7220_creg32(dd, + cr_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = read_7220_creg32(dd, + cr_iblinkerrrecov); + } + try_7220_autoneg(ppd); + ret = 1; /* no other IB status change processing */ + } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && + ppd->link_speed_active == QIB_IB_SDR) { + autoneg_7220_send(ppd, 1); + set_7220_ibspeed_fast(ppd, QIB_IB_DDR); + udelay(2); + toggle_7220_rclkrls(dd); + ret = 1; /* no other IB status change processing */ + } else { + if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && + (ppd->link_speed_active & QIB_IB_DDR)) { + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | + QIBL_IB_AUTONEG_FAILED); + spin_unlock_irqrestore(&ppd->lflags_lock, + flags); + dd->cspec->autoneg_tries = 0; + /* re-enable SDR, for next link down */ + set_7220_ibspeed_fast(ppd, + ppd->link_speed_enabled); + wake_up(&ppd->cpspec->autoneg_wait); + symadj = 1; + } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { + /* + * Clear autoneg failure flag, and do setup + * so we'll try next time link goes down and + * back to INIT (possibly connected to a + * different device). + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; + spin_unlock_irqrestore(&ppd->lflags_lock, + flags); + ppd->cpspec->ibcddrctrl |= + IBA7220_IBC_IBTA_1_2_MASK; + qib_write_kreg(dd, kr_ncmodectrl, 0); + symadj = 1; + } + } + + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) + symadj = 1; + + if (!ret) { + ppd->delay_mult = rate_to_delay + [(ibcs >> IBA7220_LINKSPEED_SHIFT) & 1] + [(ibcs >> IBA7220_LINKWIDTH_SHIFT) & 1]; + + set_7220_relock_poll(dd, ibup); + spin_lock_irqsave(&ppd->sdma_lock, flags); + /* + * Unlike 7322, the 7220 needs this, due to lack of + * interrupt in some cases when we have sdma active + * when the link goes down. + */ + if (ppd->sdma_state.current_state != + qib_sdma_state_s20_idle) + __qib_sdma_process_event(ppd, + qib_sdma_event_e00_go_hw_down); + spin_unlock_irqrestore(&ppd->sdma_lock, flags); + } + } + + if (symadj) { + if (ppd->cpspec->ibdeltainprog) { + ppd->cpspec->ibdeltainprog = 0; + ppd->cpspec->ibsymdelta += read_7220_creg32(ppd->dd, + cr_ibsymbolerr) - ppd->cpspec->ibsymsnap; + ppd->cpspec->iblnkerrdelta += read_7220_creg32(ppd->dd, + cr_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; + } + } else if (!ibup && qib_compat_ddr_negotiate && + !ppd->cpspec->ibdeltainprog && + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = read_7220_creg32(ppd->dd, + cr_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = read_7220_creg32(ppd->dd, + cr_iblinkerrrecov); + } + + if (!ret) + qib_setup_7220_setextled(ppd, ibup); + return ret; +} + +/* + * Does read/modify/write to appropriate registers to + * set output and direction bits selected by mask. + * these are in their canonical postions (e.g. lsb of + * dir will end up in D48 of extctrl on existing chips). + * returns contents of GP Inputs. + */ +static int gpio_7220_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) +{ + u64 read_val, new_out; + unsigned long flags; + + if (mask) { + /* some bits being written, lock access to GPIO */ + dir &= mask; + out &= mask; + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); + dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); + new_out = (dd->cspec->gpio_out & ~mask) | out; + + qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); + qib_write_kreg(dd, kr_gpio_out, new_out); + dd->cspec->gpio_out = new_out; + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); + } + /* + * It is unlikely that a read at this time would get valid + * data on a pin whose direction line was set in the same + * call to this function. We include the read here because + * that allows us to potentially combine a change on one pin with + * a read on another, and because the old code did something like + * this. + */ + read_val = qib_read_kreg64(dd, kr_extstatus); + return SYM_FIELD(read_val, EXTStatus, GPIOIn); +} + +/* + * Read fundamental info we need to use the chip. These are + * the registers that describe chip capabilities, and are + * saved in shadow registers. + */ +static void get_7220_chip_params(struct qib_devdata *dd) +{ + u64 val; + u32 piobufs; + int mtu; + + dd->uregbase = qib_read_kreg32(dd, kr_userregbase); + + dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); + dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); + dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); + dd->palign = qib_read_kreg32(dd, kr_palign); + dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); + dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; + + val = qib_read_kreg64(dd, kr_sendpiosize); + dd->piosize2k = val & ~0U; + dd->piosize4k = val >> 32; + + mtu = ib_mtu_enum_to_int(qib_ibmtu); + if (mtu == -1) + mtu = QIB_DEFAULT_MTU; + dd->pport->ibmtu = (u32)mtu; + + val = qib_read_kreg64(dd, kr_sendpiobufcnt); + dd->piobcnt2k = val & ~0U; + dd->piobcnt4k = val >> 32; + /* these may be adjusted in init_chip_wc_pat() */ + dd->pio2kbase = (u32 __iomem *) + ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); + if (dd->piobcnt4k) { + dd->pio4kbase = (u32 __iomem *) + ((char __iomem *) dd->kregbase + + (dd->piobufbase >> 32)); + /* + * 4K buffers take 2 pages; we use roundup just to be + * paranoid; we calculate it once here, rather than on + * ever buf allocate + */ + dd->align4k = ALIGN(dd->piosize4k, dd->palign); + } + + piobufs = dd->piobcnt4k + dd->piobcnt2k; + + dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / + (sizeof(u64) * BITS_PER_BYTE / 2); +} + +/* + * The chip base addresses in cspec and cpspec have to be set + * after possible init_chip_wc_pat(), rather than in + * qib_get_7220_chip_params(), so split out as separate function + */ +static void set_7220_baseaddrs(struct qib_devdata *dd) +{ + u32 cregbase; + /* init after possible re-map in init_chip_wc_pat() */ + cregbase = qib_read_kreg32(dd, kr_counterregbase); + dd->cspec->cregbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + cregbase); + + dd->egrtidbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + dd->rcvegrbase); +} + + +#define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl, SendIntBufAvail) | \ + SYM_MASK(SendCtrl, SPioEnable) | \ + SYM_MASK(SendCtrl, SSpecialTriggerEn) | \ + SYM_MASK(SendCtrl, SendBufAvailUpd) | \ + SYM_MASK(SendCtrl, AvailUpdThld) | \ + SYM_MASK(SendCtrl, SDmaEnable) | \ + SYM_MASK(SendCtrl, SDmaIntEnable) | \ + SYM_MASK(SendCtrl, SDmaHalt) | \ + SYM_MASK(SendCtrl, SDmaSingleDescriptor)) + +static int sendctrl_hook(struct qib_devdata *dd, + const struct diag_observer *op, + u32 offs, u64 *data, u64 mask, int only_32) +{ + unsigned long flags; + unsigned idx = offs / sizeof(u64); + u64 local_data, all_bits; + + if (idx != kr_sendctrl) { + qib_dev_err(dd, "SendCtrl Hook called with offs %X, %s-bit\n", + offs, only_32 ? "32" : "64"); + return 0; + } + + all_bits = ~0ULL; + if (only_32) + all_bits >>= 32; + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if ((mask & all_bits) != all_bits) { + /* + * At least some mask bits are zero, so we need + * to read. The judgement call is whether from + * reg or shadow. First-cut: read reg, and complain + * if any bits which should be shadowed are different + * from their shadowed value. + */ + if (only_32) + local_data = (u64)qib_read_kreg32(dd, idx); + else + local_data = qib_read_kreg64(dd, idx); + qib_dev_err(dd, "Sendctrl -> %X, Shad -> %X\n", + (u32)local_data, (u32)dd->sendctrl); + if ((local_data & SENDCTRL_SHADOWED) != + (dd->sendctrl & SENDCTRL_SHADOWED)) + qib_dev_err(dd, "Sendctrl read: %X shadow is %X\n", + (u32)local_data, (u32) dd->sendctrl); + *data = (local_data & ~mask) | (*data & mask); + } + if (mask) { + /* + * At least some mask bits are one, so we need + * to write, but only shadow some bits. + */ + u64 sval, tval; /* Shadowed, transient */ + + /* + * New shadow val is bits we don't want to touch, + * ORed with bits we do, that are intended for shadow. + */ + sval = (dd->sendctrl & ~mask); + sval |= *data & SENDCTRL_SHADOWED & mask; + dd->sendctrl = sval; + tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); + qib_dev_err(dd, "Sendctrl <- %X, Shad <- %X\n", + (u32)tval, (u32)sval); + qib_write_kreg(dd, kr_sendctrl, tval); + qib_write_kreg(dd, kr_scratch, 0Ull); + } + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + + return only_32 ? 4 : 8; +} + +static const struct diag_observer sendctrl_observer = { + sendctrl_hook, kr_sendctrl * sizeof(u64), + kr_sendctrl * sizeof(u64) +}; + +/* + * write the final few registers that depend on some of the + * init setup. Done late in init, just before bringing up + * the serdes. + */ +static int qib_late_7220_initreg(struct qib_devdata *dd) +{ + int ret = 0; + u64 val; + + qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); + qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); + qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); + qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); + val = qib_read_kreg64(dd, kr_sendpioavailaddr); + if (val != dd->pioavailregs_phys) { + qib_dev_err(dd, "Catastrophic software error, " + "SendPIOAvailAddr written as %lx, " + "read back as %llx\n", + (unsigned long) dd->pioavailregs_phys, + (unsigned long long) val); + ret = -EINVAL; + } + qib_register_observer(dd, &sendctrl_observer); + return ret; +} + +static int qib_init_7220_variables(struct qib_devdata *dd) +{ + struct qib_chippport_specific *cpspec; + struct qib_pportdata *ppd; + int ret = 0; + u32 sbufs, updthresh; + + cpspec = (struct qib_chippport_specific *)(dd + 1); + ppd = &cpspec->pportdata; + dd->pport = ppd; + dd->num_pports = 1; + + dd->cspec = (struct qib_chip_specific *)(cpspec + dd->num_pports); + ppd->cpspec = cpspec; + + spin_lock_init(&dd->cspec->sdepb_lock); + spin_lock_init(&dd->cspec->rcvmod_lock); + spin_lock_init(&dd->cspec->gpio_lock); + + /* we haven't yet set QIB_PRESENT, so use read directly */ + dd->revision = readq(&dd->kregbase[kr_revision]); + + if ((dd->revision & 0xffffffffU) == 0xffffffffU) { + qib_dev_err(dd, "Revision register read failure, " + "giving up initialization\n"); + ret = -ENODEV; + goto bail; + } + dd->flags |= QIB_PRESENT; /* now register routines work */ + + dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, + ChipRevMajor); + dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, + ChipRevMinor); + + get_7220_chip_params(dd); + qib_7220_boardname(dd); + + /* + * GPIO bits for TWSI data and clock, + * used for serial EEPROM. + */ + dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; + dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; + dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; + + dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | + QIB_NODMA_RTAIL | QIB_HAS_THRESH_UPDATE; + dd->flags |= qib_special_trigger ? + QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; + + /* + * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity. + * 2 is Some Misc, 3 is reserved for future. + */ + dd->eep_st_masks[0].hwerrs_to_log = HWE_MASK(TXEMemParityErr); + + dd->eep_st_masks[1].hwerrs_to_log = HWE_MASK(RXEMemParityErr); + + dd->eep_st_masks[2].errs_to_log = ERR_MASK(ResetNegated); + + init_waitqueue_head(&cpspec->autoneg_wait); + INIT_DELAYED_WORK(&cpspec->autoneg_work, autoneg_7220_work); + + qib_init_pportdata(ppd, dd, 0, 1); + ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; + ppd->link_speed_supported = QIB_IB_SDR | QIB_IB_DDR; + + ppd->link_width_enabled = ppd->link_width_supported; + ppd->link_speed_enabled = ppd->link_speed_supported; + /* + * Set the initial values to reasonable default, will be set + * for real when link is up. + */ + ppd->link_width_active = IB_WIDTH_4X; + ppd->link_speed_active = QIB_IB_SDR; + ppd->delay_mult = rate_to_delay[0][1]; + ppd->vls_supported = IB_VL_VL0; + ppd->vls_operational = ppd->vls_supported; + + if (!qib_mini_init) + qib_write_kreg(dd, kr_rcvbthqp, QIB_KD_QP); + + init_timer(&ppd->cpspec->chase_timer); + ppd->cpspec->chase_timer.function = reenable_7220_chase; + ppd->cpspec->chase_timer.data = (unsigned long)ppd; + + qib_num_cfg_vls = 1; /* if any 7220's, only one VL */ + + dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE; + dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE; + dd->rhf_offset = + dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); + + /* we always allocate at least 2048 bytes for eager buffers */ + ret = ib_mtu_enum_to_int(qib_ibmtu); + dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU; + + qib_7220_tidtemplate(dd); + + /* + * We can request a receive interrupt for 1 or + * more packets from current offset. For now, we set this + * up for a single packet. + */ + dd->rhdrhead_intr_off = 1ULL << 32; + + /* setup the stats timer; the add_timer is done at end of init */ + init_timer(&dd->stats_timer); + dd->stats_timer.function = qib_get_7220_faststats; + dd->stats_timer.data = (unsigned long) dd; + dd->stats_timer.expires = jiffies + ACTIVITY_TIMER * HZ; + + /* + * Control[4] has been added to change the arbitration within + * the SDMA engine between favoring data fetches over descriptor + * fetches. qib_sdma_fetch_arb==0 gives data fetches priority. + */ + if (qib_sdma_fetch_arb) + dd->control |= 1 << 4; + + dd->ureg_align = 0x10000; /* 64KB alignment */ + + dd->piosize2kmax_dwords = (dd->piosize2k >> 2)-1; + qib_7220_config_ctxts(dd); + qib_set_ctxtcnt(dd); /* needed for PAT setup */ + + if (qib_wc_pat) { + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; + } + set_7220_baseaddrs(dd); /* set chip access pointers now */ + + ret = 0; + if (qib_mini_init) + goto bail; + + ret = qib_create_ctxts(dd); + init_7220_cntrnames(dd); + + /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. + * reserve the update threshold amount for other kernel use, such + * as sending SMI, MAD, and ACKs, or 3, whichever is greater, + * unless we aren't enabling SDMA, in which case we want to use + * all the 4k bufs for the kernel. + * if this was less than the update threshold, we could wait + * a long time for an update. Coded this way because we + * sometimes change the update threshold for various reasons, + * and we want this to remain robust. + */ + updthresh = 8U; /* update threshold */ + if (dd->flags & QIB_HAS_SEND_DMA) { + dd->cspec->sdmabufcnt = dd->piobcnt4k; + sbufs = updthresh > 3 ? updthresh : 3; + } else { + dd->cspec->sdmabufcnt = 0; + sbufs = dd->piobcnt4k; + } + + dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - + dd->cspec->sdmabufcnt; + dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; + dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ + dd->pbufsctxt = dd->lastctxt_piobuf / + (dd->cfgctxts - dd->first_user_ctxt); + + /* + * if we are at 16 user contexts, we will have one 7 sbufs + * per context, so drop the update threshold to match. We + * want to update before we actually run out, at low pbufs/ctxt + * so give ourselves some margin + */ + if ((dd->pbufsctxt - 2) < updthresh) + updthresh = dd->pbufsctxt - 2; + + dd->cspec->updthresh_dflt = updthresh; + dd->cspec->updthresh = updthresh; + + /* before full enable, no interrupts, no locking needed */ + dd->sendctrl |= (updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) + << SYM_LSB(SendCtrl, AvailUpdThld); + + dd->psxmitwait_supported = 1; + dd->psxmitwait_check_rate = QIB_7220_PSXMITWAIT_CHECK_RATE; +bail: + return ret; +} + +static u32 __iomem *qib_7220_getsendbuf(struct qib_pportdata *ppd, u64 pbc, + u32 *pbufnum) +{ + u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; + struct qib_devdata *dd = ppd->dd; + u32 __iomem *buf; + + if (((pbc >> 32) & PBC_7220_VL15_SEND_CTRL) && + !(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE))) + buf = get_7220_link_buf(ppd, pbufnum); + else { + if ((plen + 1) > dd->piosize2kmax_dwords) + first = dd->piobcnt2k; + else + first = 0; + /* try 4k if all 2k busy, so same last for both sizes */ + last = dd->cspec->lastbuf_for_pio; + buf = qib_getsendbuf_range(dd, pbufnum, first, last); + } + return buf; +} + +/* these 2 "counters" are really control registers, and are always RW */ +static void qib_set_cntr_7220_sample(struct qib_pportdata *ppd, u32 intv, + u32 start) +{ + write_7220_creg(ppd->dd, cr_psinterval, intv); + write_7220_creg(ppd->dd, cr_psstart, start); +} + +/* + * NOTE: no real attempt is made to generalize the SDMA stuff. + * At some point "soon" we will have a new more generalized + * set of sdma interface, and then we'll clean this up. + */ + +/* Must be called with sdma_lock held, or before init finished */ +static void qib_sdma_update_7220_tail(struct qib_pportdata *ppd, u16 tail) +{ + /* Commit writes to memory and advance the tail on the chip */ + wmb(); + ppd->sdma_descq_tail = tail; + qib_write_kreg(ppd->dd, kr_senddmatail, tail); +} + +static void qib_sdma_set_7220_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) +{ +} + +static struct sdma_set_state_action sdma_7220_action_table[] = { + [qib_sdma_state_s00_hw_down] = { + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .go_s99_running_tofalse = 1, + }, + [qib_sdma_state_s10_hw_start_up_wait] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + }, + [qib_sdma_state_s20_idle] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + }, + [qib_sdma_state_s30_sw_clean_up_wait] = { + .op_enable = 0, + .op_intenable = 1, + .op_halt = 0, + }, + [qib_sdma_state_s40_hw_clean_up_wait] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + }, + [qib_sdma_state_s50_hw_halt_wait] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + }, + [qib_sdma_state_s99_running] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 0, + .go_s99_running_totrue = 1, + }, +}; + +static void qib_7220_sdma_init_early(struct qib_pportdata *ppd) +{ + ppd->sdma_state.set_state_action = sdma_7220_action_table; +} + +static int init_sdma_7220_regs(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + unsigned i, n; + u64 senddmabufmask[3] = { 0 }; + + /* Set SendDmaBase */ + qib_write_kreg(dd, kr_senddmabase, ppd->sdma_descq_phys); + qib_sdma_7220_setlengen(ppd); + qib_sdma_update_7220_tail(ppd, 0); /* Set SendDmaTail */ + /* Set SendDmaHeadAddr */ + qib_write_kreg(dd, kr_senddmaheadaddr, ppd->sdma_head_phys); + + /* + * Reserve all the former "kernel" piobufs, using high number range + * so we get as many 4K buffers as possible + */ + n = dd->piobcnt2k + dd->piobcnt4k; + i = n - dd->cspec->sdmabufcnt; + + for (; i < n; ++i) { + unsigned word = i / 64; + unsigned bit = i & 63; + + BUG_ON(word >= 3); + senddmabufmask[word] |= 1ULL << bit; + } + qib_write_kreg(dd, kr_senddmabufmask0, senddmabufmask[0]); + qib_write_kreg(dd, kr_senddmabufmask1, senddmabufmask[1]); + qib_write_kreg(dd, kr_senddmabufmask2, senddmabufmask[2]); + + ppd->sdma_state.first_sendbuf = i; + ppd->sdma_state.last_sendbuf = n; + + return 0; +} + +/* sdma_lock must be held */ +static u16 qib_sdma_7220_gethead(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + int sane; + int use_dmahead; + u16 swhead; + u16 swtail; + u16 cnt; + u16 hwhead; + + use_dmahead = __qib_sdma_running(ppd) && + (dd->flags & QIB_HAS_SDMA_TIMEOUT); +retry: + hwhead = use_dmahead ? + (u16)le64_to_cpu(*ppd->sdma_head_dma) : + (u16)qib_read_kreg32(dd, kr_senddmahead); + + swhead = ppd->sdma_descq_head; + swtail = ppd->sdma_descq_tail; + cnt = ppd->sdma_descq_cnt; + + if (swhead < swtail) { + /* not wrapped */ + sane = (hwhead >= swhead) & (hwhead <= swtail); + } else if (swhead > swtail) { + /* wrapped around */ + sane = ((hwhead >= swhead) && (hwhead < cnt)) || + (hwhead <= swtail); + } else { + /* empty */ + sane = (hwhead == swhead); + } + + if (unlikely(!sane)) { + if (use_dmahead) { + /* try one more time, directly from the register */ + use_dmahead = 0; + goto retry; + } + /* assume no progress */ + hwhead = swhead; + } + + return hwhead; +} + +static int qib_sdma_7220_busy(struct qib_pportdata *ppd) +{ + u64 hwstatus = qib_read_kreg64(ppd->dd, kr_senddmastatus); + + return (hwstatus & SYM_MASK(SendDmaStatus, ScoreBoardDrainInProg)) || + (hwstatus & SYM_MASK(SendDmaStatus, AbortInProg)) || + (hwstatus & SYM_MASK(SendDmaStatus, InternalSDmaEnable)) || + !(hwstatus & SYM_MASK(SendDmaStatus, ScbEmpty)); +} + +/* + * Compute the amount of delay before sending the next packet if the + * port's send rate differs from the static rate set for the QP. + * Since the delay affects this packet but the amount of the delay is + * based on the length of the previous packet, use the last delay computed + * and save the delay count for this packet to be used next time + * we get here. + */ +static u32 qib_7220_setpbc_control(struct qib_pportdata *ppd, u32 plen, + u8 srate, u8 vl) +{ + u8 snd_mult = ppd->delay_mult; + u8 rcv_mult = ib_rate_to_delay[srate]; + u32 ret = ppd->cpspec->last_delay_mult; + + ppd->cpspec->last_delay_mult = (rcv_mult > snd_mult) ? + (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0; + + /* Indicate VL15, if necessary */ + if (vl == 15) + ret |= PBC_7220_VL15_SEND_CTRL; + return ret; +} + +static void qib_7220_initvl15_bufs(struct qib_devdata *dd) +{ +} + +static void qib_7220_init_ctxt(struct qib_ctxtdata *rcd) +{ + if (!rcd->ctxt) { + rcd->rcvegrcnt = IBA7220_KRCVEGRCNT; + rcd->rcvegr_tid_base = 0; + } else { + rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; + rcd->rcvegr_tid_base = IBA7220_KRCVEGRCNT + + (rcd->ctxt - 1) * rcd->rcvegrcnt; + } +} + +static void qib_7220_txchk_change(struct qib_devdata *dd, u32 start, + u32 len, u32 which, struct qib_ctxtdata *rcd) +{ + int i; + unsigned long flags; + + switch (which) { + case TXCHK_CHG_TYPE_KERN: + /* see if we need to raise avail update threshold */ + spin_lock_irqsave(&dd->uctxt_lock, flags); + for (i = dd->first_user_ctxt; + dd->cspec->updthresh != dd->cspec->updthresh_dflt + && i < dd->cfgctxts; i++) + if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && + ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) + < dd->cspec->updthresh_dflt) + break; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + if (i == dd->cfgctxts) { + spin_lock_irqsave(&dd->sendctrl_lock, flags); + dd->cspec->updthresh = dd->cspec->updthresh_dflt; + dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); + dd->sendctrl |= (dd->cspec->updthresh & + SYM_RMASK(SendCtrl, AvailUpdThld)) << + SYM_LSB(SendCtrl, AvailUpdThld); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + } + break; + case TXCHK_CHG_TYPE_USER: + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if (rcd && rcd->subctxt_cnt && ((rcd->piocnt + / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { + dd->cspec->updthresh = (rcd->piocnt / + rcd->subctxt_cnt) - 1; + dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); + dd->sendctrl |= (dd->cspec->updthresh & + SYM_RMASK(SendCtrl, AvailUpdThld)) + << SYM_LSB(SendCtrl, AvailUpdThld); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + } else + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + break; + } +} + +static void writescratch(struct qib_devdata *dd, u32 val) +{ + qib_write_kreg(dd, kr_scratch, val); +} + +#define VALID_TS_RD_REG_MASK 0xBF +/** + * qib_7220_tempsense_read - read register of temp sensor via TWSI + * @dd: the qlogic_ib device + * @regnum: register to read from + * + * returns reg contents (0..255) or < 0 for error + */ +static int qib_7220_tempsense_rd(struct qib_devdata *dd, int regnum) +{ + int ret; + u8 rdata; + + if (regnum > 7) { + ret = -EINVAL; + goto bail; + } + + /* return a bogus value for (the one) register we do not have */ + if (!((1 << regnum) & VALID_TS_RD_REG_MASK)) { + ret = 0; + goto bail; + } + + ret = mutex_lock_interruptible(&dd->eep_lock); + if (ret) + goto bail; + + ret = qib_twsi_blk_rd(dd, QIB_TWSI_TEMP_DEV, regnum, &rdata, 1); + if (!ret) + ret = rdata; + + mutex_unlock(&dd->eep_lock); + + /* + * There are three possibilities here: + * ret is actual value (0..255) + * ret is -ENXIO or -EINVAL from twsi code or this file + * ret is -EINTR from mutex_lock_interruptible. + */ +bail: + return ret; +} + +/* Dummy function, as 7220 boards never disable EEPROM Write */ +static int qib_7220_eeprom_wen(struct qib_devdata *dd, int wen) +{ + return 1; +} + +/** + * qib_init_iba7220_funcs - set up the chip-specific function pointers + * @dev: the pci_dev for qlogic_ib device + * @ent: pci_device_id struct for this dev + * + * This is global, and is called directly at init to set up the + * chip-specific function pointers for later use. + */ +struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct qib_devdata *dd; + int ret; + u32 boardid, minwidth; + + dd = qib_alloc_devdata(pdev, sizeof(struct qib_chip_specific) + + sizeof(struct qib_chippport_specific)); + if (IS_ERR(dd)) + goto bail; + + dd->f_bringup_serdes = qib_7220_bringup_serdes; + dd->f_cleanup = qib_setup_7220_cleanup; + dd->f_clear_tids = qib_7220_clear_tids; + dd->f_free_irq = qib_7220_free_irq; + dd->f_get_base_info = qib_7220_get_base_info; + dd->f_get_msgheader = qib_7220_get_msgheader; + dd->f_getsendbuf = qib_7220_getsendbuf; + dd->f_gpio_mod = gpio_7220_mod; + dd->f_eeprom_wen = qib_7220_eeprom_wen; + dd->f_hdrqempty = qib_7220_hdrqempty; + dd->f_ib_updown = qib_7220_ib_updown; + dd->f_init_ctxt = qib_7220_init_ctxt; + dd->f_initvl15_bufs = qib_7220_initvl15_bufs; + dd->f_intr_fallback = qib_7220_intr_fallback; + dd->f_late_initreg = qib_late_7220_initreg; + dd->f_setpbc_control = qib_7220_setpbc_control; + dd->f_portcntr = qib_portcntr_7220; + dd->f_put_tid = qib_7220_put_tid; + dd->f_quiet_serdes = qib_7220_quiet_serdes; + dd->f_rcvctrl = rcvctrl_7220_mod; + dd->f_read_cntrs = qib_read_7220cntrs; + dd->f_read_portcntrs = qib_read_7220portcntrs; + dd->f_reset = qib_setup_7220_reset; + dd->f_init_sdma_regs = init_sdma_7220_regs; + dd->f_sdma_busy = qib_sdma_7220_busy; + dd->f_sdma_gethead = qib_sdma_7220_gethead; + dd->f_sdma_sendctrl = qib_7220_sdma_sendctrl; + dd->f_sdma_set_desc_cnt = qib_sdma_set_7220_desc_cnt; + dd->f_sdma_update_tail = qib_sdma_update_7220_tail; + dd->f_sdma_hw_clean_up = qib_7220_sdma_hw_clean_up; + dd->f_sdma_hw_start_up = qib_7220_sdma_hw_start_up; + dd->f_sdma_init_early = qib_7220_sdma_init_early; + dd->f_sendctrl = sendctrl_7220_mod; + dd->f_set_armlaunch = qib_set_7220_armlaunch; + dd->f_set_cntr_sample = qib_set_cntr_7220_sample; + dd->f_iblink_state = qib_7220_iblink_state; + dd->f_ibphys_portstate = qib_7220_phys_portstate; + dd->f_get_ib_cfg = qib_7220_get_ib_cfg; + dd->f_set_ib_cfg = qib_7220_set_ib_cfg; + dd->f_set_ib_loopback = qib_7220_set_loopback; + dd->f_set_intr_state = qib_7220_set_intr_state; + dd->f_setextled = qib_setup_7220_setextled; + dd->f_txchk_change = qib_7220_txchk_change; + dd->f_update_usrhead = qib_update_7220_usrhead; + dd->f_wantpiobuf_intr = qib_wantpiobuf_7220_intr; + dd->f_xgxs_reset = qib_7220_xgxs_reset; + dd->f_writescratch = writescratch; + dd->f_tempsense_rd = qib_7220_tempsense_rd; + /* + * Do remaining pcie setup and save pcie values in dd. + * Any error printing is already done by the init code. + * On return, we have the chip mapped, but chip registers + * are not set up until start of qib_init_7220_variables. + */ + ret = qib_pcie_ddinit(dd, pdev, ent); + if (ret < 0) + goto bail_free; + + /* initialize chip-specific variables */ + ret = qib_init_7220_variables(dd); + if (ret) + goto bail_cleanup; + + if (qib_mini_init) + goto bail; + + boardid = SYM_FIELD(dd->revision, Revision, + BoardID); + switch (boardid) { + case 0: + case 2: + case 10: + case 12: + minwidth = 16; /* x16 capable boards */ + break; + default: + minwidth = 8; /* x8 capable boards */ + break; + } + if (qib_pcie_params(dd, minwidth, NULL, NULL)) + qib_dev_err(dd, "Failed to setup PCIe or interrupts; " + "continuing anyway\n"); + + /* save IRQ for possible later use */ + dd->cspec->irq = pdev->irq; + + if (qib_read_kreg64(dd, kr_hwerrstatus) & + QLOGIC_IB_HWE_SERDESPLLFAILED) + qib_write_kreg(dd, kr_hwerrclear, + QLOGIC_IB_HWE_SERDESPLLFAILED); + + /* setup interrupt handler (interrupt type handled above) */ + qib_setup_7220_interrupt(dd); + qib_7220_init_hwerrors(dd); + + /* clear diagctrl register, in case diags were running and crashed */ + qib_write_kreg(dd, kr_hwdiagctrl, 0); + + goto bail; + +bail_cleanup: + qib_pcie_ddcleanup(dd); +bail_free: + qib_free_devdata(dd); + dd = ERR_PTR(ret); +bail: + return dd; +} |