diff options
Diffstat (limited to 'drivers/edac/edac_core.h')
| -rw-r--r-- | drivers/edac/edac_core.h | 851 |
1 files changed, 851 insertions, 0 deletions
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h new file mode 100644 index 00000000000..4e6bad15c4b --- /dev/null +++ b/drivers/edac/edac_core.h @@ -0,0 +1,851 @@ +/* + * Defines, structures, APIs for edac_core module + * + * (C) 2007 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * NMI handling support added by + * Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com> + * + * Refactored for multi-source files: + * Doug Thompson <norsk5@xmission.com> + * + */ + +#ifndef _EDAC_CORE_H_ +#define _EDAC_CORE_H_ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <linux/pci.h> +#include <linux/time.h> +#include <linux/nmi.h> +#include <linux/rcupdate.h> +#include <linux/completion.h> +#include <linux/kobject.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/workqueue.h> +#include <linux/version.h> + +#define EDAC_MC_LABEL_LEN 31 +#define EDAC_DEVICE_NAME_LEN 31 +#define EDAC_ATTRIB_VALUE_LEN 15 +#define MC_PROC_NAME_MAX_LEN 7 + +#if PAGE_SHIFT < 20 +#define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) ) +#else /* PAGE_SHIFT > 20 */ +#define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) ) +#endif + +#define edac_printk(level, prefix, fmt, arg...) \ + printk(level "EDAC " prefix ": " fmt, ##arg) + +#define edac_mc_printk(mci, level, fmt, arg...) \ + printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg) + +#define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \ + printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg) + +/* edac_device printk */ +#define edac_device_printk(ctl, level, fmt, arg...) \ + printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg) + +/* edac_pci printk */ +#define edac_pci_printk(ctl, level, fmt, arg...) \ + printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg) + +/* prefixes for edac_printk() and edac_mc_printk() */ +#define EDAC_MC "MC" +#define EDAC_PCI "PCI" +#define EDAC_DEBUG "DEBUG" + +#ifdef CONFIG_EDAC_DEBUG +extern int edac_debug_level; + +#define edac_debug_printk(level, fmt, arg...) \ + do { \ + if (level <= edac_debug_level) \ + edac_printk(KERN_EMERG, EDAC_DEBUG, fmt, ##arg); \ + } while(0) + +#define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ ) +#define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ ) +#define debugf2( ... ) edac_debug_printk(2, __VA_ARGS__ ) +#define debugf3( ... ) edac_debug_printk(3, __VA_ARGS__ ) +#define debugf4( ... ) edac_debug_printk(4, __VA_ARGS__ ) + +#else /* !CONFIG_EDAC_DEBUG */ + +#define debugf0( ... ) +#define debugf1( ... ) +#define debugf2( ... ) +#define debugf3( ... ) +#define debugf4( ... ) + +#endif /* !CONFIG_EDAC_DEBUG */ + +#define BIT(x) (1 << (x)) + +#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \ + PCI_DEVICE_ID_ ## vend ## _ ## dev + +#define dev_name(dev) (dev)->dev_name + +/* memory devices */ +enum dev_type { + DEV_UNKNOWN = 0, + DEV_X1, + DEV_X2, + DEV_X4, + DEV_X8, + DEV_X16, + DEV_X32, /* Do these parts exist? */ + DEV_X64 /* Do these parts exist? */ +}; + +#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN) +#define DEV_FLAG_X1 BIT(DEV_X1) +#define DEV_FLAG_X2 BIT(DEV_X2) +#define DEV_FLAG_X4 BIT(DEV_X4) +#define DEV_FLAG_X8 BIT(DEV_X8) +#define DEV_FLAG_X16 BIT(DEV_X16) +#define DEV_FLAG_X32 BIT(DEV_X32) +#define DEV_FLAG_X64 BIT(DEV_X64) + +/* memory types */ +enum mem_type { + MEM_EMPTY = 0, /* Empty csrow */ + MEM_RESERVED, /* Reserved csrow type */ + MEM_UNKNOWN, /* Unknown csrow type */ + MEM_FPM, /* Fast page mode */ + MEM_EDO, /* Extended data out */ + MEM_BEDO, /* Burst Extended data out */ + MEM_SDR, /* Single data rate SDRAM */ + MEM_RDR, /* Registered single data rate SDRAM */ + MEM_DDR, /* Double data rate SDRAM */ + MEM_RDDR, /* Registered Double data rate SDRAM */ + MEM_RMBS, /* Rambus DRAM */ + MEM_DDR2, /* DDR2 RAM */ + MEM_FB_DDR2, /* fully buffered DDR2 */ + MEM_RDDR2, /* Registered DDR2 RAM */ +}; + +#define MEM_FLAG_EMPTY BIT(MEM_EMPTY) +#define MEM_FLAG_RESERVED BIT(MEM_RESERVED) +#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN) +#define MEM_FLAG_FPM BIT(MEM_FPM) +#define MEM_FLAG_EDO BIT(MEM_EDO) +#define MEM_FLAG_BEDO BIT(MEM_BEDO) +#define MEM_FLAG_SDR BIT(MEM_SDR) +#define MEM_FLAG_RDR BIT(MEM_RDR) +#define MEM_FLAG_DDR BIT(MEM_DDR) +#define MEM_FLAG_RDDR BIT(MEM_RDDR) +#define MEM_FLAG_RMBS BIT(MEM_RMBS) +#define MEM_FLAG_DDR2 BIT(MEM_DDR2) +#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) +#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) + +/* chipset Error Detection and Correction capabilities and mode */ +enum edac_type { + EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ + EDAC_NONE, /* Doesnt support ECC */ + EDAC_RESERVED, /* Reserved ECC type */ + EDAC_PARITY, /* Detects parity errors */ + EDAC_EC, /* Error Checking - no correction */ + EDAC_SECDED, /* Single bit error correction, Double detection */ + EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */ + EDAC_S4ECD4ED, /* Chipkill x4 devices */ + EDAC_S8ECD8ED, /* Chipkill x8 devices */ + EDAC_S16ECD16ED, /* Chipkill x16 devices */ +}; + +#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN) +#define EDAC_FLAG_NONE BIT(EDAC_NONE) +#define EDAC_FLAG_PARITY BIT(EDAC_PARITY) +#define EDAC_FLAG_EC BIT(EDAC_EC) +#define EDAC_FLAG_SECDED BIT(EDAC_SECDED) +#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED) +#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED) +#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED) +#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED) + +/* scrubbing capabilities */ +enum scrub_type { + SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */ + SCRUB_NONE, /* No scrubber */ + SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */ + SCRUB_SW_SRC, /* Software scrub only errors */ + SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */ + SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */ + SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */ + SCRUB_HW_SRC, /* Hardware scrub only errors */ + SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */ + SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */ +}; + +#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG) +#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC) +#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC) +#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE) +#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG) +#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC) +#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC) +#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE) + +/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */ + +/* EDAC internal operation states */ +#define OP_ALLOC 0x100 +#define OP_RUNNING_POLL 0x201 +#define OP_RUNNING_INTERRUPT 0x202 +#define OP_RUNNING_POLL_INTR 0x203 +#define OP_OFFLINE 0x300 + +/* + * There are several things to be aware of that aren't at all obvious: + * + * + * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. + * + * These are some of the many terms that are thrown about that don't always + * mean what people think they mean (Inconceivable!). In the interest of + * creating a common ground for discussion, terms and their definitions + * will be established. + * + * Memory devices: The individual chip on a memory stick. These devices + * commonly output 4 and 8 bits each. Grouping several + * of these in parallel provides 64 bits which is common + * for a memory stick. + * + * Memory Stick: A printed circuit board that agregates multiple + * memory devices in parallel. This is the atomic + * memory component that is purchaseable by Joe consumer + * and loaded into a memory socket. + * + * Socket: A physical connector on the motherboard that accepts + * a single memory stick. + * + * Channel: Set of memory devices on a memory stick that must be + * grouped in parallel with one or more additional + * channels from other memory sticks. This parallel + * grouping of the output from multiple channels are + * necessary for the smallest granularity of memory access. + * Some memory controllers are capable of single channel - + * which means that memory sticks can be loaded + * individually. Other memory controllers are only + * capable of dual channel - which means that memory + * sticks must be loaded as pairs (see "socket set"). + * + * Chip-select row: All of the memory devices that are selected together. + * for a single, minimum grain of memory access. + * This selects all of the parallel memory devices across + * all of the parallel channels. Common chip-select rows + * for single channel are 64 bits, for dual channel 128 + * bits. + * + * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memmory. + * Motherboards commonly drive two chip-select pins to + * a memory stick. A single-ranked stick, will occupy + * only one of those rows. The other will be unused. + * + * Double-Ranked stick: A double-ranked stick has two chip-select rows which + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. + * + * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. + * A double-sided stick has two chip-select rows which + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. "Double-sided" + * is irrespective of the memory devices being mounted + * on both sides of the memory stick. + * + * Socket set: All of the memory sticks that are required for for + * a single memory access or all of the memory sticks + * spanned by a chip-select row. A single socket set + * has two chip-select rows and if double-sided sticks + * are used these will occupy those chip-select rows. + * + * Bank: This term is avoided because it is unclear when + * needing to distinguish between chip-select rows and + * socket sets. + * + * Controller pages: + * + * Physical pages: + * + * Virtual pages: + * + * + * STRUCTURE ORGANIZATION AND CHOICES + * + * + * + * PS - I enjoyed writing all that about as much as you enjoyed reading it. + */ + +struct channel_info { + int chan_idx; /* channel index */ + u32 ce_count; /* Correctable Errors for this CHANNEL */ + char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ + struct csrow_info *csrow; /* the parent */ +}; + +struct csrow_info { + unsigned long first_page; /* first page number in dimm */ + unsigned long last_page; /* last page number in dimm */ + unsigned long page_mask; /* used for interleaving - + * 0UL for non intlv + */ + u32 nr_pages; /* number of pages in csrow */ + u32 grain; /* granularity of reported error in bytes */ + int csrow_idx; /* the chip-select row */ + enum dev_type dtype; /* memory device type */ + u32 ue_count; /* Uncorrectable Errors for this csrow */ + u32 ce_count; /* Correctable Errors for this csrow */ + enum mem_type mtype; /* memory csrow type */ + enum edac_type edac_mode; /* EDAC mode for this csrow */ + struct mem_ctl_info *mci; /* the parent */ + + struct kobject kobj; /* sysfs kobject for this csrow */ + + /* channel information for this csrow */ + u32 nr_channels; + struct channel_info *channels; +}; + +/* mcidev_sysfs_attribute structure + * used for driver sysfs attributes and in mem_ctl_info + * sysfs top level entries + */ +struct mcidev_sysfs_attribute { + struct attribute attr; + ssize_t (*show)(struct mem_ctl_info *,char *); + ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); +}; + +/* MEMORY controller information structure + */ +struct mem_ctl_info { + struct list_head link; /* for global list of mem_ctl_info structs */ + + struct module *owner; /* Module owner of this control struct */ + + unsigned long mtype_cap; /* memory types supported by mc */ + unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */ + unsigned long edac_cap; /* configuration capabilities - this is + * closely related to edac_ctl_cap. The + * difference is that the controller may be + * capable of s4ecd4ed which would be listed + * in edac_ctl_cap, but if channels aren't + * capable of s4ecd4ed then the edac_cap would + * not have that capability. + */ + unsigned long scrub_cap; /* chipset scrub capabilities */ + enum scrub_type scrub_mode; /* current scrub mode */ + + /* Translates sdram memory scrub rate given in bytes/sec to the + internal representation and configures whatever else needs + to be configured. + */ + int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw); + + /* Get the current sdram memory scrub rate from the internal + representation and converts it to the closest matching + bandwith in bytes/sec. + */ + int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw); + + + /* pointer to edac checking routine */ + void (*edac_check) (struct mem_ctl_info * mci); + + /* + * Remaps memory pages: controller pages to physical pages. + * For most MC's, this will be NULL. + */ + /* FIXME - why not send the phys page to begin with? */ + unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, + unsigned long page); + int mc_idx; + int nr_csrows; + struct csrow_info *csrows; + /* + * FIXME - what about controllers on other busses? - IDs must be + * unique. dev pointer should be sufficiently unique, but + * BUS:SLOT.FUNC numbers may not be unique. + */ + struct device *dev; + const char *mod_name; + const char *mod_ver; + const char *ctl_name; + const char *dev_name; + char proc_name[MC_PROC_NAME_MAX_LEN + 1]; + void *pvt_info; + u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */ + u32 ce_noinfo_count; /* Correctable Errors w/o info */ + u32 ue_count; /* Total Uncorrectable Errors for this MC */ + u32 ce_count; /* Total Correctable Errors for this MC */ + unsigned long start_time; /* mci load start time (in jiffies) */ + + /* this stuff is for safe removal of mc devices from global list while + * NMI handlers may be traversing list + */ + struct rcu_head rcu; + struct completion complete; + + /* edac sysfs device control */ + struct kobject edac_mci_kobj; + + /* Additional top controller level attributes, but specified + * by the low level driver. + * + * Set by the low level driver to provide attributes at the + * controller level, same level as 'ue_count' and 'ce_count' above. + * An array of structures, NULL terminated + * + * If attributes are desired, then set to array of attributes + * If no attributes are desired, leave NULL + */ + struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes; + + /* work struct for this MC */ + struct delayed_work work; + + /* the internal state of this controller instance */ + int op_state; +}; + +/* + * The following are the structures to provide for a generic + * or abstract 'edac_device'. This set of structures and the + * code that implements the APIs for the same, provide for + * registering EDAC type devices which are NOT standard memory. + * + * CPU caches (L1 and L2) + * DMA engines + * Core CPU swithces + * Fabric switch units + * PCIe interface controllers + * other EDAC/ECC type devices that can be monitored for + * errors, etc. + * + * It allows for a 2 level set of hiearchry. For example: + * + * cache could be composed of L1, L2 and L3 levels of cache. + * Each CPU core would have its own L1 cache, while sharing + * L2 and maybe L3 caches. + * + * View them arranged, via the sysfs presentation: + * /sys/devices/system/edac/.. + * + * mc/ <existing memory device directory> + * cpu/cpu0/.. <L1 and L2 block directory> + * /L1-cache/ce_count + * /ue_count + * /L2-cache/ce_count + * /ue_count + * cpu/cpu1/.. <L1 and L2 block directory> + * /L1-cache/ce_count + * /ue_count + * /L2-cache/ce_count + * /ue_count + * ... + * + * the L1 and L2 directories would be "edac_device_block's" + */ + +struct edac_device_counter { + u32 ue_count; + u32 ce_count; +}; + +/* forward reference */ +struct edac_device_ctl_info; +struct edac_device_block; + +/* edac_dev_sysfs_attribute structure + * used for driver sysfs attributes in mem_ctl_info + * for extra controls and attributes: + * like high level error Injection controls + */ +struct edac_dev_sysfs_attribute { + struct attribute attr; + ssize_t (*show)(struct edac_device_ctl_info *, char *); + ssize_t (*store)(struct edac_device_ctl_info *, const char *, size_t); +}; + +/* edac_dev_sysfs_block_attribute structure + * + * used in leaf 'block' nodes for adding controls/attributes + * + * each block in each instance of the containing control structure + * can have an array of the following. The show and store functions + * will be filled in with the show/store function in the + * low level driver. + * + * The 'value' field will be the actual value field used for + * counting + */ +struct edac_dev_sysfs_block_attribute { + struct attribute attr; + ssize_t (*show)(struct kobject *, struct attribute *, char *); + ssize_t (*store)(struct kobject *, struct attribute *, + const char *, size_t); + struct edac_device_block *block; + + unsigned int value; +}; + +/* device block control structure */ +struct edac_device_block { + struct edac_device_instance *instance; /* Up Pointer */ + char name[EDAC_DEVICE_NAME_LEN + 1]; + + struct edac_device_counter counters; /* basic UE and CE counters */ + + int nr_attribs; /* how many attributes */ + + /* this block's attributes, could be NULL */ + struct edac_dev_sysfs_block_attribute *block_attributes; + + /* edac sysfs device control */ + struct kobject kobj; +}; + +/* device instance control structure */ +struct edac_device_instance { + struct edac_device_ctl_info *ctl; /* Up pointer */ + char name[EDAC_DEVICE_NAME_LEN + 4]; + + struct edac_device_counter counters; /* instance counters */ + + u32 nr_blocks; /* how many blocks */ + struct edac_device_block *blocks; /* block array */ + + /* edac sysfs device control */ + struct kobject kobj; +}; + + +/* + * Abstract edac_device control info structure + * + */ +struct edac_device_ctl_info { + /* for global list of edac_device_ctl_info structs */ + struct list_head link; + + struct module *owner; /* Module owner of this control struct */ + + int dev_idx; + + /* Per instance controls for this edac_device */ + int log_ue; /* boolean for logging UEs */ + int log_ce; /* boolean for logging CEs */ + int panic_on_ue; /* boolean for panic'ing on an UE */ + unsigned poll_msec; /* number of milliseconds to poll interval */ + unsigned long delay; /* number of jiffies for poll_msec */ + + /* Additional top controller level attributes, but specified + * by the low level driver. + * + * Set by the low level driver to provide attributes at the + * controller level, same level as 'ue_count' and 'ce_count' above. + * An array of structures, NULL terminated + * + * If attributes are desired, then set to array of attributes + * If no attributes are desired, leave NULL + */ + struct edac_dev_sysfs_attribute *sysfs_attributes; + + /* pointer to main 'edac' class in sysfs */ + struct sysdev_class *edac_class; + + /* the internal state of this controller instance */ + int op_state; + /* work struct for this instance */ + struct delayed_work work; + + /* pointer to edac polling checking routine: + * If NOT NULL: points to polling check routine + * If NULL: Then assumes INTERRUPT operation, where + * MC driver will receive events + */ + void (*edac_check) (struct edac_device_ctl_info * edac_dev); + + struct device *dev; /* pointer to device structure */ + + const char *mod_name; /* module name */ + const char *ctl_name; /* edac controller name */ + const char *dev_name; /* pci/platform/etc... name */ + + void *pvt_info; /* pointer to 'private driver' info */ + + unsigned long start_time; /* edac_device load start time (jiffies) */ + + /* these are for safe removal of mc devices from global list while + * NMI handlers may be traversing list + */ + struct rcu_head rcu; + struct completion removal_complete; + + /* sysfs top name under 'edac' directory + * and instance name: + * cpu/cpu0/... + * cpu/cpu1/... + * cpu/cpu2/... + * ... + */ + char name[EDAC_DEVICE_NAME_LEN + 1]; + + /* Number of instances supported on this control structure + * and the array of those instances + */ + u32 nr_instances; + struct edac_device_instance *instances; + + /* Event counters for the this whole EDAC Device */ + struct edac_device_counter counters; + + /* edac sysfs device control for the 'name' + * device this structure controls + */ + struct kobject kobj; +}; + +/* To get from the instance's wq to the beginning of the ctl structure */ +#define to_edac_mem_ctl_work(w) \ + container_of(w, struct mem_ctl_info, work) + +#define to_edac_device_ctl_work(w) \ + container_of(w,struct edac_device_ctl_info,work) + +/* + * The alloc() and free() functions for the 'edac_device' control info + * structure. A MC driver will allocate one of these for each edac_device + * it is going to control/register with the EDAC CORE. + */ +extern struct edac_device_ctl_info *edac_device_alloc_ctl_info( + unsigned sizeof_private, + char *edac_device_name, unsigned nr_instances, + char *edac_block_name, unsigned nr_blocks, + unsigned offset_value, + struct edac_dev_sysfs_block_attribute *block_attributes, + unsigned nr_attribs, + int device_index); + +/* The offset value can be: + * -1 indicating no offset value + * 0 for zero-based block numbers + * 1 for 1-based block number + * other for other-based block number + */ +#define BLOCK_OFFSET_VALUE_OFF ((unsigned) -1) + +extern void edac_device_free_ctl_info(struct edac_device_ctl_info *ctl_info); + +#ifdef CONFIG_PCI + +struct edac_pci_counter { + atomic_t pe_count; + atomic_t npe_count; +}; + +/* + * Abstract edac_pci control info structure + * + */ +struct edac_pci_ctl_info { + /* for global list of edac_pci_ctl_info structs */ + struct list_head link; + + int pci_idx; + + struct sysdev_class *edac_class; /* pointer to class */ + + /* the internal state of this controller instance */ + int op_state; + /* work struct for this instance */ + struct delayed_work work; + + /* pointer to edac polling checking routine: + * If NOT NULL: points to polling check routine + * If NULL: Then assumes INTERRUPT operation, where + * MC driver will receive events + */ + void (*edac_check) (struct edac_pci_ctl_info * edac_dev); + + struct device *dev; /* pointer to device structure */ + + const char *mod_name; /* module name */ + const char *ctl_name; /* edac controller name */ + const char *dev_name; /* pci/platform/etc... name */ + + void *pvt_info; /* pointer to 'private driver' info */ + + unsigned long start_time; /* edac_pci load start time (jiffies) */ + + /* these are for safe removal of devices from global list while + * NMI handlers may be traversing list + */ + struct rcu_head rcu; + struct completion complete; + + /* sysfs top name under 'edac' directory + * and instance name: + * cpu/cpu0/... + * cpu/cpu1/... + * cpu/cpu2/... + * ... + */ + char name[EDAC_DEVICE_NAME_LEN + 1]; + + /* Event counters for the this whole EDAC Device */ + struct edac_pci_counter counters; + + /* edac sysfs device control for the 'name' + * device this structure controls + */ + struct kobject kobj; + struct completion kobj_complete; +}; + +#define to_edac_pci_ctl_work(w) \ + container_of(w, struct edac_pci_ctl_info,work) + +/* write all or some bits in a byte-register*/ +static inline void pci_write_bits8(struct pci_dev *pdev, int offset, u8 value, + u8 mask) +{ + if (mask != 0xff) { + u8 buf; + + pci_read_config_byte(pdev, offset, &buf); + value &= mask; + buf &= ~mask; + value |= buf; + } + + pci_write_config_byte(pdev, offset, value); +} + +/* write all or some bits in a word-register*/ +static inline void pci_write_bits16(struct pci_dev *pdev, int offset, + u16 value, u16 mask) +{ + if (mask != 0xffff) { + u16 buf; + + pci_read_config_word(pdev, offset, &buf); + value &= mask; + buf &= ~mask; + value |= buf; + } + + pci_write_config_word(pdev, offset, value); +} + +/* write all or some bits in a dword-register*/ +static inline void pci_write_bits32(struct pci_dev *pdev, int offset, + u32 value, u32 mask) +{ + if (mask != 0xffff) { + u32 buf; + + pci_read_config_dword(pdev, offset, &buf); + value &= mask; + buf &= ~mask; + value |= buf; + } + + pci_write_config_dword(pdev, offset, value); +} + +#endif /* CONFIG_PCI */ + +extern struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, + unsigned nr_chans, int edac_index); +extern int edac_mc_add_mc(struct mem_ctl_info *mci); +extern void edac_mc_free(struct mem_ctl_info *mci); +extern struct mem_ctl_info *edac_mc_find(int idx); +extern struct mem_ctl_info *edac_mc_del_mc(struct device *dev); +extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, + unsigned long page); + +/* + * The no info errors are used when error overflows are reported. + * There are a limited number of error logging registers that can + * be exausted. When all registers are exhausted and an additional + * error occurs then an error overflow register records that an + * error occured and the type of error, but doesn't have any + * further information. The ce/ue versions make for cleaner + * reporting logic and function interface - reduces conditional + * statement clutter and extra function arguments. + */ +extern void edac_mc_handle_ce(struct mem_ctl_info *mci, + unsigned long page_frame_number, + unsigned long offset_in_page, + unsigned long syndrome, int row, int channel, + const char *msg); +extern void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, + const char *msg); +extern void edac_mc_handle_ue(struct mem_ctl_info *mci, + unsigned long page_frame_number, + unsigned long offset_in_page, int row, + const char *msg); +extern void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, + const char *msg); +extern void edac_mc_handle_fbd_ue(struct mem_ctl_info *mci, unsigned int csrow, + unsigned int channel0, unsigned int channel1, + char *msg); +extern void edac_mc_handle_fbd_ce(struct mem_ctl_info *mci, unsigned int csrow, + unsigned int channel, char *msg); + +/* + * edac_device APIs + */ +extern int edac_device_add_device(struct edac_device_ctl_info *edac_dev); +extern struct edac_device_ctl_info *edac_device_del_device(struct device *dev); +extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, + int inst_nr, int block_nr, const char *msg); +extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, + int inst_nr, int block_nr, const char *msg); + +/* + * edac_pci APIs + */ +extern struct edac_pci_ctl_info *edac_pci_alloc_ctl_info(unsigned int sz_pvt, + const char *edac_pci_name); + +extern void edac_pci_free_ctl_info(struct edac_pci_ctl_info *pci); + +extern void edac_pci_reset_delay_period(struct edac_pci_ctl_info *pci, + unsigned long value); + +extern int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx); +extern struct edac_pci_ctl_info *edac_pci_del_device(struct device *dev); + +extern struct edac_pci_ctl_info *edac_pci_create_generic_ctl( + struct device *dev, + const char *mod_name); + +extern void edac_pci_release_generic_ctl(struct edac_pci_ctl_info *pci); +extern int edac_pci_create_sysfs(struct edac_pci_ctl_info *pci); +extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci); + +/* + * edac misc APIs + */ +extern char *edac_op_state_to_string(int op_state); + +#endif /* _EDAC_CORE_H_ */ |