aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards/mach-x3proto/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-x3proto/setup.c')
-rw-r--r--arch/sh/boards/mach-x3proto/setup.c132
1 files changed, 120 insertions, 12 deletions
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 102bf56befb..d682e2b6a85 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -1,9 +1,9 @@
/*
- * arch/sh/boards/renesas/x3proto/setup.c
+ * arch/sh/boards/mach-x3proto/setup.c
*
* Renesas SH-X3 Prototype Board Support.
*
- * Copyright (C) 2007 - 2008 Paul Mundt
+ * Copyright (C) 2007 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -16,9 +16,13 @@
#include <linux/smc91x.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/input.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/m66592.h>
-#include <asm/ilsel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
#include <asm/smp-ops.h>
static struct resource heartbeat_resources[] = {
@@ -122,15 +126,128 @@ static struct platform_device m66592_usb_peripheral_device = {
.resource = m66592_usb_peripheral_resources,
};
+static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
+ {
+ .desc = "key44",
+ .code = KEY_POWER,
+ .active_low = 1,
+ .wakeup = 1,
+ }, {
+ .desc = "key43",
+ .code = KEY_SUSPEND,
+ .active_low = 1,
+ .wakeup = 1,
+ }, {
+ .desc = "key42",
+ .code = KEY_KATAKANAHIRAGANA,
+ .active_low = 1,
+ }, {
+ .desc = "key41",
+ .code = KEY_SWITCHVIDEOMODE,
+ .active_low = 1,
+ }, {
+ .desc = "key34",
+ .code = KEY_F12,
+ .active_low = 1,
+ }, {
+ .desc = "key33",
+ .code = KEY_F11,
+ .active_low = 1,
+ }, {
+ .desc = "key32",
+ .code = KEY_F10,
+ .active_low = 1,
+ }, {
+ .desc = "key31",
+ .code = KEY_F9,
+ .active_low = 1,
+ }, {
+ .desc = "key24",
+ .code = KEY_F8,
+ .active_low = 1,
+ }, {
+ .desc = "key23",
+ .code = KEY_F7,
+ .active_low = 1,
+ }, {
+ .desc = "key22",
+ .code = KEY_F6,
+ .active_low = 1,
+ }, {
+ .desc = "key21",
+ .code = KEY_F5,
+ .active_low = 1,
+ }, {
+ .desc = "key14",
+ .code = KEY_F4,
+ .active_low = 1,
+ }, {
+ .desc = "key13",
+ .code = KEY_F3,
+ .active_low = 1,
+ }, {
+ .desc = "key12",
+ .code = KEY_F2,
+ .active_low = 1,
+ }, {
+ .desc = "key11",
+ .code = KEY_F1,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data baseboard_buttons_data = {
+ .buttons = baseboard_buttons,
+ .nbuttons = ARRAY_SIZE(baseboard_buttons),
+};
+
+static struct platform_device baseboard_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &baseboard_buttons_data,
+ },
+};
+
static struct platform_device *x3proto_devices[] __initdata = {
&heartbeat_device,
&smc91x_device,
&r8a66597_usb_host_device,
&m66592_usb_peripheral_device,
+ &baseboard_buttons_device,
};
+static void __init x3proto_init_irq(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+ /* Set ICR0.LVLMODE */
+ __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
static int __init x3proto_devices_setup(void)
{
+ int ret, i;
+
+ /*
+ * IRLs are only needed for ILSEL mappings, so flip over the INTC
+ * pins at a later point to enable the GPIOs to settle.
+ */
+ x3proto_init_irq();
+
+ /*
+ * Now that ILSELs are available, set up the baseboard GPIOs.
+ */
+ ret = x3proto_gpio_setup();
+ if (unlikely(ret))
+ return ret;
+
+ /*
+ * Propagate dynamic GPIOs for the baseboard button device.
+ */
+ for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
+ baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
+
r8a66597_usb_host_resources[1].start =
r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
@@ -145,14 +262,6 @@ static int __init x3proto_devices_setup(void)
}
device_initcall(x3proto_devices_setup);
-static void __init x3proto_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- /* Set ICR0.LVLMODE */
- __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
static void __init x3proto_setup(char **cmdline_p)
{
register_smp_ops(&shx3_smp_ops);
@@ -161,5 +270,4 @@ static void __init x3proto_setup(char **cmdline_p)
static struct sh_machine_vector mv_x3proto __initmv = {
.mv_name = "x3proto",
.mv_setup = x3proto_setup,
- .mv_init_irq = x3proto_init_irq,
};