diff options
Diffstat (limited to 'arch/mips/ddb5xxx/ddb5074/irq.c')
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5074/irq.c | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c new file mode 100644 index 00000000000..45088a1be41 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5074/irq.c @@ -0,0 +1,159 @@ +/* + * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines + * + * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> + * Sony Software Development Center Europe (SDCE), Brussels + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/i8259.h> +#include <asm/io.h> +#include <asm/irq_cpu.h> +#include <asm/ptrace.h> +#include <asm/nile4.h> +#include <asm/ddb5xxx/ddb5xxx.h> +#include <asm/ddb5xxx/ddb5074.h> + + +extern asmlinkage void ddbIRQ(void); + +static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; + +#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ +#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */ +#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */ + +#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */ +#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */ +#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */ + +#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */ +#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */ + +#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */ +#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */ + +#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */ +#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */ + + +static void m1543_irq_setup(void) +{ + /* + * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all + * the possible IO sources in the M1543 are in use by us. We will + * use the following mapping: + * + * IRQ1 - keyboard (default set by M1543) + * IRQ3 - reserved for UART B (default set by M1543) (note that + * the schematics for the DDB Vrc-5074 board seem to + * indicate that IRQ3 is connected to the DS1386 + * watchdog timer interrupt output so we might have + * a conflict) + * IRQ4 - reserved for UART A (default set by M1543) + * IRQ5 - parallel (default set by M1543) + * IRQ8 - DS1386 time of day (RTC) interrupt + * IRQ12 - mouse + */ + + /* + * Assing mouse interrupt to IRQ12 + */ + + /* Enter configuration mode */ + outb(0x51, M1543_PNP_CONFIG); + outb(0x23, M1543_PNP_CONFIG); + + /* Select logical device 7 (Keyboard) */ + outb(0x07, M1543_PNP_INDEX); + outb(0x07, M1543_PNP_DATA); + + /* Select IRQ12 */ + outb(0x72, M1543_PNP_INDEX); + outb(0x0c, M1543_PNP_DATA); + + outb(0x30, M1543_PNP_INDEX); + printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA)); + + outb(0x70, M1543_PNP_INDEX); + printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA)); + + /* Leave configration mode */ + outb(0xbb, M1543_PNP_CONFIG); + + +} + +void ddb_local0_irqdispatch(struct pt_regs *regs) +{ + u32 mask; + int nile4_irq; + + mask = nile4_get_irq_stat(0); + + /* Handle the timer interrupt first */ +#if 0 + if (mask & (1 << NILE4_INT_GPT)) { + do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs); + mask &= ~(1 << NILE4_INT_GPT); + } +#endif + for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1) + if (mask & 1) { + if (nile4_irq == NILE4_INT_INTE) { + int i8259_irq; + + nile4_clear_irq(NILE4_INT_INTE); + i8259_irq = nile4_i8259_iack(); + do_IRQ(i8259_irq, regs); + } else + do_IRQ(nile4_to_irq(nile4_irq), regs); + + } +} + +void ddb_local1_irqdispatch(void) +{ + printk("ddb_local1_irqdispatch called\n"); +} + +void ddb_buserror_irq(void) +{ + printk("ddb_buserror_irq called\n"); +} + +void ddb_8254timer_irq(void) +{ + printk("ddb_8254timer_irq called\n"); +} + +void __init arch_init_irq(void) +{ + /* setup cascade interrupts */ + setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); + + set_except_vector(0, ddbIRQ); + + nile4_irq_setup(NILE4_IRQ_BASE); + m1543_irq_setup(); + init_i8259_irqs(); + + + printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE); + + mips_cpu_irq_init(CPU_IRQ_BASE); + + printk("enabling 8259 cascade\n"); + + ddb5074_led_hex(0); + + /* Enable the interrupt cascade */ + nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE); +} |