aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/common/Kconfig3
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/gic.c166
-rw-r--r--include/asm-arm/hardware/gic.h41
4 files changed, 211 insertions, 0 deletions
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 692af6b5e8f..666ba393575 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,6 +1,9 @@
config ICST525
bool
+config ARM_GIC
+ bool
+
config ICST307
bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 11f20a43ee3..a87886564b1 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -4,6 +4,7 @@
obj-y += rtctime.o
obj-$(CONFIG_ARM_AMBA) += amba.o
+obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_ICST525) += icst525.o
obj-$(CONFIG_ICST307) += icst307.o
obj-$(CONFIG_SA1111) += sa1111.o
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
new file mode 100644
index 00000000000..51dbf5489b6
--- /dev/null
+++ b/arch/arm/common/gic.c
@@ -0,0 +1,166 @@
+/*
+ * linux/arch/arm/common/gic.c
+ *
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Interrupt architecture for the GIC:
+ *
+ * o There is one Interrupt Distributor, which receives interrupts
+ * from system devices and sends them to the Interrupt Controllers.
+ *
+ * o There is one CPU Interface per CPU, which sends interrupts sent
+ * by the Distributor, and interrupts generated locally, to the
+ * associated CPU.
+ *
+ * Note that IRQs 0-31 are special - they are local to each CPU.
+ * As such, the enable set/clear, pending set/clear and active bit
+ * registers are banked per-cpu for these sources.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/smp.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware/gic.h>
+
+static void __iomem *gic_dist_base;
+static void __iomem *gic_cpu_base;
+
+/*
+ * Routines to acknowledge, disable and enable interrupts
+ *
+ * Linux assumes that when we're done with an interrupt we need to
+ * unmask it, in the same way we need to unmask an interrupt when
+ * we first enable it.
+ *
+ * The GIC has a seperate notion of "end of interrupt" to re-enable
+ * an interrupt after handling, in order to support hardware
+ * prioritisation.
+ *
+ * We can make the GIC behave in the way that Linux expects by making
+ * our "acknowledge" routine disable the interrupt, then mark it as
+ * complete.
+ */
+static void gic_ack_irq(unsigned int irq)
+{
+ u32 mask = 1 << (irq % 32);
+ writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+ writel(irq, gic_cpu_base + GIC_CPU_EOI);
+}
+
+static void gic_mask_irq(unsigned int irq)
+{
+ u32 mask = 1 << (irq % 32);
+ writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+}
+
+static void gic_unmask_irq(unsigned int irq)
+{
+ u32 mask = 1 << (irq % 32);
+ writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+}
+
+static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+{
+ void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+ unsigned int shift = (irq % 4) * 8;
+ u32 val;
+
+ val = readl(reg) & ~(0xff << shift);
+ val |= 1 << (cpu + shift);
+ writel(val, reg);
+}
+
+static struct irqchip gic_chip = {
+ .ack = gic_ack_irq,
+ .mask = gic_mask_irq,
+ .unmask = gic_unmask_irq,
+#ifdef CONFIG_SMP
+ .set_cpu = gic_set_cpu,
+#endif
+};
+
+void __init gic_dist_init(void __iomem *base)
+{
+ unsigned int max_irq, i;
+ u32 cpumask = 1 << smp_processor_id();
+
+ cpumask |= cpumask << 8;
+ cpumask |= cpumask << 16;
+
+ gic_dist_base = base;
+
+ writel(0, base + GIC_DIST_CTRL);
+
+ /*
+ * Find out how many interrupts are supported.
+ */
+ max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
+ max_irq = (max_irq + 1) * 32;
+
+ /*
+ * The GIC only supports up to 1020 interrupt sources.
+ * Limit this to either the architected maximum, or the
+ * platform maximum.
+ */
+ if (max_irq > max(1020, NR_IRQS))
+ max_irq = max(1020, NR_IRQS);
+
+ /*
+ * Set all global interrupts to be level triggered, active low.
+ */
+ for (i = 32; i < max_irq; i += 16)
+ writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
+
+ /*
+ * Set all global interrupts to this CPU only.
+ */
+ for (i = 32; i < max_irq; i += 4)
+ writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
+
+ /*
+ * Set priority on all interrupts.
+ */
+ for (i = 0; i < max_irq; i += 4)
+ writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+
+ /*
+ * Disable all interrupts.
+ */
+ for (i = 0; i < max_irq; i += 32)
+ writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+
+ /*
+ * Setup the Linux IRQ subsystem.
+ */
+ for (i = 29; i < max_irq; i++) {
+ set_irq_chip(i, &gic_chip);
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+
+ writel(1, base + GIC_DIST_CTRL);
+}
+
+void __cpuinit gic_cpu_init(void __iomem *base)
+{
+ gic_cpu_base = base;
+ writel(0xf0, base + GIC_CPU_PRIMASK);
+ writel(1, base + GIC_CPU_CTRL);
+}
+
+#ifdef CONFIG_SMP
+void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+{
+ unsigned long map = *cpus_addr(cpumask);
+
+ writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+}
+#endif
diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h
new file mode 100644
index 00000000000..3fa5eb70f64
--- /dev/null
+++ b/include/asm-arm/hardware/gic.h
@@ -0,0 +1,41 @@
+/*
+ * linux/include/asm-arm/hardware/gic.h
+ *
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_HARDWARE_GIC_H
+#define __ASM_ARM_HARDWARE_GIC_H
+
+#include <linux/compiler.h>
+
+#define GIC_CPU_CTRL 0x00
+#define GIC_CPU_PRIMASK 0x04
+#define GIC_CPU_BINPOINT 0x08
+#define GIC_CPU_INTACK 0x0c
+#define GIC_CPU_EOI 0x10
+#define GIC_CPU_RUNNINGPRI 0x14
+#define GIC_CPU_HIGHPRI 0x18
+
+#define GIC_DIST_CTRL 0x000
+#define GIC_DIST_CTR 0x004
+#define GIC_DIST_ENABLE_SET 0x100
+#define GIC_DIST_ENABLE_CLEAR 0x180
+#define GIC_DIST_PENDING_SET 0x200
+#define GIC_DIST_PENDING_CLEAR 0x280
+#define GIC_DIST_ACTIVE_BIT 0x300
+#define GIC_DIST_PRI 0x400
+#define GIC_DIST_TARGET 0x800
+#define GIC_DIST_CONFIG 0xc00
+#define GIC_DIST_SOFTINT 0xf00
+
+#ifndef __ASSEMBLY__
+void gic_dist_init(void __iomem *base);
+void gic_cpu_init(void __iomem *base);
+void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+#endif
+
+#endif